blob: 9da764bdcf31f7fd896ef0d1b8ebea59eebb356d [file] [log] [blame]
wdenke85390d2002-04-01 14:29:03 +00001/*
2 * (C) Copyright 2001
3 * Denis Peter, MPL AG Switzerland
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 *
23 */
24 #ifndef _SCSI_H
25 #define _SCSI_H
26
27typedef struct SCSI_cmd_block{
28 unsigned char cmd[16]; /* command */
Puneet Saxenaf5766132012-04-03 14:56:06 +053029 /* for request sense */
30 unsigned char sense_buf[64]
31 __attribute__((aligned(ARCH_DMA_MINALIGN)));
wdenke85390d2002-04-01 14:29:03 +000032 unsigned char status; /* SCSI Status */
33 unsigned char target; /* Target ID */
34 unsigned char lun; /* Target LUN */
35 unsigned char cmdlen; /* command len */
36 unsigned long datalen; /* Total data length */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020037 unsigned char * pdata; /* pointer to data */
wdenke85390d2002-04-01 14:29:03 +000038 unsigned char msgout[12]; /* Messge out buffer (NOT USED) */
39 unsigned char msgin[12]; /* Message in buffer */
40 unsigned char sensecmdlen; /* Sense command len */
41 unsigned long sensedatalen; /* Sense data len */
42 unsigned char sensecmd[6]; /* Sense command */
43 unsigned long contr_stat; /* Controller Status */
44 unsigned long trans_bytes; /* tranfered bytes */
45
46 unsigned int priv;
47}ccb;
48
49/*-----------------------------------------------------------
50**
51** SCSI constants.
52**
53**-----------------------------------------------------------
54*/
55
56/*
57** Messages
58*/
59
60#define M_COMPLETE (0x00)
61#define M_EXTENDED (0x01)
62#define M_SAVE_DP (0x02)
63#define M_RESTORE_DP (0x03)
64#define M_DISCONNECT (0x04)
65#define M_ID_ERROR (0x05)
66#define M_ABORT (0x06)
67#define M_REJECT (0x07)
68#define M_NOOP (0x08)
69#define M_PARITY (0x09)
70#define M_LCOMPLETE (0x0a)
71#define M_FCOMPLETE (0x0b)
72#define M_RESET (0x0c)
73#define M_ABORT_TAG (0x0d)
74#define M_CLEAR_QUEUE (0x0e)
75#define M_INIT_REC (0x0f)
76#define M_REL_REC (0x10)
77#define M_TERMINATE (0x11)
78#define M_SIMPLE_TAG (0x20)
79#define M_HEAD_TAG (0x21)
80#define M_ORDERED_TAG (0x22)
81#define M_IGN_RESIDUE (0x23)
Wolfgang Denk53677ef2008-05-20 16:00:29 +020082#define M_IDENTIFY (0x80)
wdenke85390d2002-04-01 14:29:03 +000083
84#define M_X_MODIFY_DP (0x00)
85#define M_X_SYNC_REQ (0x01)
86#define M_X_WIDE_REQ (0x03)
87#define M_X_PPR_REQ (0x04)
88
89
90/*
91** Status
92*/
93
94#define S_GOOD (0x00)
95#define S_CHECK_COND (0x02)
96#define S_COND_MET (0x04)
97#define S_BUSY (0x08)
98#define S_INT (0x10)
99#define S_INT_COND_MET (0x14)
100#define S_CONFLICT (0x18)
101#define S_TERMINATED (0x20)
102#define S_QUEUE_FULL (0x28)
103#define S_ILLEGAL (0xff)
104#define S_SENSE (0x80)
105
106/*
107 * Sense_keys
108 */
109
110#define SENSE_NO_SENSE 0x0
111#define SENSE_RECOVERED_ERROR 0x1
112#define SENSE_NOT_READY 0x2
113#define SENSE_MEDIUM_ERROR 0x3
114#define SENSE_HARDWARE_ERROR 0x4
115#define SENSE_ILLEGAL_REQUEST 0x5
116#define SENSE_UNIT_ATTENTION 0x6
117#define SENSE_DATA_PROTECT 0x7
118#define SENSE_BLANK_CHECK 0x8
119#define SENSE_VENDOR_SPECIFIC 0x9
120#define SENSE_COPY_ABORTED 0xA
121#define SENSE_ABORTED_COMMAND 0xB
122#define SENSE_VOLUME_OVERFLOW 0xD
123#define SENSE_MISCOMPARE 0xE
124
125
126#define SCSI_CHANGE_DEF 0x40 /* Change Definition (Optional) */
127#define SCSI_COMPARE 0x39 /* Compare (O) */
128#define SCSI_COPY 0x18 /* Copy (O) */
129#define SCSI_COP_VERIFY 0x3A /* Copy and Verify (O) */
130#define SCSI_INQUIRY 0x12 /* Inquiry (MANDATORY) */
131#define SCSI_LOG_SELECT 0x4C /* Log Select (O) */
132#define SCSI_LOG_SENSE 0x4D /* Log Sense (O) */
133#define SCSI_MODE_SEL6 0x15 /* Mode Select 6-byte (Device Specific) */
134#define SCSI_MODE_SEL10 0x55 /* Mode Select 10-byte (Device Specific) */
135#define SCSI_MODE_SEN6 0x1A /* Mode Sense 6-byte (Device Specific) */
136#define SCSI_MODE_SEN10 0x5A /* Mode Sense 10-byte (Device Specific) */
137#define SCSI_READ_BUFF 0x3C /* Read Buffer (O) */
138#define SCSI_REQ_SENSE 0x03 /* Request Sense (MANDATORY) */
139#define SCSI_SEND_DIAG 0x1D /* Send Diagnostic (O) */
140#define SCSI_TST_U_RDY 0x00 /* Test Unit Ready (MANDATORY) */
141#define SCSI_WRITE_BUFF 0x3B /* Write Buffer (O) */
142/***************************************************************************
143 * %%% Commands Unique to Direct Access Devices %%%
144 ***************************************************************************/
145#define SCSI_COMPARE 0x39 /* Compare (O) */
146#define SCSI_FORMAT 0x04 /* Format Unit (MANDATORY) */
147#define SCSI_LCK_UN_CAC 0x36 /* Lock Unlock Cache (O) */
148#define SCSI_PREFETCH 0x34 /* Prefetch (O) */
149#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */
150#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
151#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
152#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
Gabe Black19d1d412012-10-29 05:23:54 +0000153#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
154#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */
wdenke85390d2002-04-01 14:29:03 +0000155#define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */
156#define SCSI_READ_LONG 0x3E /* Read Long (O) */
157#define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */
158#define SCSI_RCV_DIAG 0x1C /* Receive Diagnostic Results (O) */
159#define SCSI_RELEASE 0x17 /* Release Unit (MANDATORY) */
160#define SCSI_REZERO 0x01 /* Rezero Unit (O) */
161#define SCSI_SRCH_DAT_E 0x31 /* Search Data Equal (O) */
162#define SCSI_SRCH_DAT_H 0x30 /* Search Data High (O) */
163#define SCSI_SRCH_DAT_L 0x32 /* Search Data Low (O) */
164#define SCSI_SEEK6 0x0B /* Seek 6-Byte (O) */
165#define SCSI_SEEK10 0x2B /* Seek 10-Byte (O) */
166#define SCSI_SEND_DIAG 0x1D /* Send Diagnostics (MANDATORY) */
167#define SCSI_SET_LIMIT 0x33 /* Set Limits (O) */
168#define SCSI_START_STP 0x1B /* Start/Stop Unit (O) */
169#define SCSI_SYNC_CACHE 0x35 /* Synchronize Cache (O) */
170#define SCSI_VERIFY 0x2F /* Verify (O) */
171#define SCSI_WRITE6 0x0A /* Write 6-Byte (MANDATORY) */
172#define SCSI_WRITE10 0x2A /* Write 10-Byte (MANDATORY) */
173#define SCSI_WRT_VERIFY 0x2E /* Write and Verify (O) */
174#define SCSI_WRITE_LONG 0x3F /* Write Long (O) */
175#define SCSI_WRITE_SAME 0x41 /* Write Same (O) */
176
177
178/****************************************************************************
179 * decleration of functions which have to reside in the LowLevel Part Driver
180 */
181
182void scsi_print_error(ccb *pccb);
183int scsi_exec(ccb *pccb);
184void scsi_bus_reset(void);
185void scsi_low_level_init(int busdevfunc);
186
187
188/***************************************************************************
189 * functions residing inside cmd_scsi.c
190 */
191void scsi_init(void);
Rob Herring942e3142011-07-06 16:13:36 +0000192void scsi_scan(int mode);
wdenke85390d2002-04-01 14:29:03 +0000193
Stefan Reinauer447c0312012-10-29 05:23:48 +0000194/** @return the number of scsi disks */
195int scsi_get_disk_count(void);
wdenke85390d2002-04-01 14:29:03 +0000196
wdenke85390d2002-04-01 14:29:03 +0000197#define SCSI_IDENTIFY 0xC0 /* not used */
198
199/* Hardware errors */
200#define SCSI_SEL_TIME_OUT 0x00000101 /* Selection time out */
201#define SCSI_HNS_TIME_OUT 0x00000102 /* Handshake */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200202#define SCSI_MA_TIME_OUT 0x00000103 /* Phase error */
wdenke85390d2002-04-01 14:29:03 +0000203#define SCSI_UNEXP_DIS 0x00000104 /* unexpected disconnect */
204
205#define SCSI_INT_STATE 0x00010000 /* unknown Interrupt number is stored in 16 LSB */
206
207
wdenke85390d2002-04-01 14:29:03 +0000208#ifndef TRUE
209#define TRUE 1
210#endif
211#ifndef FALSE
212#define FALSE 0
213#endif
214
wdenke85390d2002-04-01 14:29:03 +0000215#endif /* _SCSI_H */