Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2016 Peng Fan <van.freenix@gmail.com> |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <common.h> |
| 7 | #include <mapmem.h> |
| 8 | #include <linux/io.h> |
| 9 | #include <linux/err.h> |
Simon Glass | 9d92245 | 2017-05-17 17:18:03 -0600 | [diff] [blame] | 10 | #include <dm.h> |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 11 | #include <dm/pinctrl.h> |
| 12 | |
| 13 | #include "pinctrl-imx.h" |
| 14 | |
| 15 | DECLARE_GLOBAL_DATA_PTR; |
| 16 | |
| 17 | static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config) |
| 18 | { |
| 19 | struct imx_pinctrl_priv *priv = dev_get_priv(dev); |
| 20 | struct imx_pinctrl_soc_info *info = priv->info; |
Simon Glass | e160f7d | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 21 | int node = dev_of_offset(config); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 22 | const struct fdt_property *prop; |
| 23 | u32 *pin_data; |
| 24 | int npins, size, pin_size; |
| 25 | int mux_reg, conf_reg, input_reg, input_val, mux_mode, config_val; |
Peng Fan | 4aa9d4d0 | 2017-02-22 16:21:49 +0800 | [diff] [blame] | 26 | u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0; |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 27 | int i, j = 0; |
| 28 | |
| 29 | dev_dbg(dev, "%s: %s\n", __func__, config->name); |
| 30 | |
| 31 | if (info->flags & SHARE_MUX_CONF_REG) |
| 32 | pin_size = SHARE_FSL_PIN_SIZE; |
| 33 | else |
| 34 | pin_size = FSL_PIN_SIZE; |
| 35 | |
| 36 | prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size); |
| 37 | if (!prop) { |
| 38 | dev_err(dev, "No fsl,pins property in node %s\n", config->name); |
| 39 | return -EINVAL; |
| 40 | } |
| 41 | |
| 42 | if (!size || size % pin_size) { |
| 43 | dev_err(dev, "Invalid fsl,pins property in node %s\n", |
| 44 | config->name); |
| 45 | return -EINVAL; |
| 46 | } |
| 47 | |
| 48 | pin_data = devm_kzalloc(dev, size, 0); |
| 49 | if (!pin_data) |
| 50 | return -ENOMEM; |
| 51 | |
| 52 | if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins", |
| 53 | pin_data, size >> 2)) { |
| 54 | dev_err(dev, "Error reading pin data.\n"); |
Peng Fan | c1d1e9d | 2017-05-11 17:34:14 +0800 | [diff] [blame] | 55 | devm_kfree(dev, pin_data); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 56 | return -EINVAL; |
| 57 | } |
| 58 | |
| 59 | npins = size / pin_size; |
| 60 | |
| 61 | /* |
| 62 | * Refer to linux documentation for details: |
| 63 | * Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt |
| 64 | */ |
| 65 | for (i = 0; i < npins; i++) { |
| 66 | mux_reg = pin_data[j++]; |
| 67 | |
| 68 | if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg) |
| 69 | mux_reg = -1; |
| 70 | |
| 71 | if (info->flags & SHARE_MUX_CONF_REG) { |
| 72 | conf_reg = mux_reg; |
| 73 | } else { |
| 74 | conf_reg = pin_data[j++]; |
| 75 | if (!(info->flags & ZERO_OFFSET_VALID) && !conf_reg) |
| 76 | conf_reg = -1; |
| 77 | } |
| 78 | |
| 79 | if ((mux_reg == -1) || (conf_reg == -1)) { |
| 80 | dev_err(dev, "Error mux_reg or conf_reg\n"); |
Peng Fan | c1d1e9d | 2017-05-11 17:34:14 +0800 | [diff] [blame] | 81 | devm_kfree(dev, pin_data); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 82 | return -EINVAL; |
| 83 | } |
| 84 | |
| 85 | input_reg = pin_data[j++]; |
| 86 | mux_mode = pin_data[j++]; |
| 87 | input_val = pin_data[j++]; |
| 88 | config_val = pin_data[j++]; |
| 89 | |
| 90 | dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, input_reg 0x%x, " |
| 91 | "mux_mode 0x%x, input_val 0x%x, config_val 0x%x\n", |
| 92 | mux_reg, conf_reg, input_reg, mux_mode, input_val, |
| 93 | config_val); |
| 94 | |
| 95 | if (config_val & IMX_PAD_SION) |
| 96 | mux_mode |= IOMUXC_CONFIG_SION; |
| 97 | |
| 98 | config_val &= ~IMX_PAD_SION; |
| 99 | |
| 100 | /* Set Mux */ |
| 101 | if (info->flags & SHARE_MUX_CONF_REG) { |
Peng Fan | 4aa9d4d0 | 2017-02-22 16:21:49 +0800 | [diff] [blame] | 102 | clrsetbits_le32(info->base + mux_reg, info->mux_mask, |
| 103 | mux_mode << mux_shift); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 104 | } else { |
| 105 | writel(mux_mode, info->base + mux_reg); |
| 106 | } |
| 107 | |
| 108 | dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n", mux_reg, |
| 109 | mux_mode); |
| 110 | |
| 111 | /* |
| 112 | * Set select input |
| 113 | * |
| 114 | * If the select input value begins with 0xff, it's a quirky |
| 115 | * select input and the value should be interpreted as below. |
| 116 | * 31 23 15 7 0 |
| 117 | * | 0xff | shift | width | select | |
| 118 | * It's used to work around the problem that the select |
| 119 | * input for some pin is not implemented in the select |
| 120 | * input register but in some general purpose register. |
| 121 | * We encode the select input value, width and shift of |
| 122 | * the bit field into input_val cell of pin function ID |
| 123 | * in device tree, and then decode them here for setting |
| 124 | * up the select input bits in general purpose register. |
| 125 | */ |
| 126 | |
| 127 | if (input_val >> 24 == 0xff) { |
| 128 | u32 val = input_val; |
| 129 | u8 select = val & 0xff; |
| 130 | u8 width = (val >> 8) & 0xff; |
| 131 | u8 shift = (val >> 16) & 0xff; |
| 132 | u32 mask = ((1 << width) - 1) << shift; |
| 133 | /* |
| 134 | * The input_reg[i] here is actually some IOMUXC general |
| 135 | * purpose register, not regular select input register. |
| 136 | */ |
| 137 | val = readl(info->base + input_reg); |
| 138 | val &= ~mask; |
| 139 | val |= select << shift; |
| 140 | writel(val, info->base + input_reg); |
| 141 | } else if (input_reg) { |
| 142 | /* |
| 143 | * Regular select input register can never be at offset |
| 144 | * 0, and we only print register value for regular case. |
| 145 | */ |
| 146 | if (info->input_sel_base) |
| 147 | writel(input_val, info->input_sel_base + |
| 148 | input_reg); |
| 149 | else |
| 150 | writel(input_val, info->base + input_reg); |
| 151 | |
| 152 | dev_dbg(dev, "select_input: offset 0x%x val 0x%x\n", |
| 153 | input_reg, input_val); |
| 154 | } |
| 155 | |
| 156 | /* Set config */ |
| 157 | if (!(config_val & IMX_NO_PAD_CTL)) { |
| 158 | if (info->flags & SHARE_MUX_CONF_REG) { |
Peng Fan | 4aa9d4d0 | 2017-02-22 16:21:49 +0800 | [diff] [blame] | 159 | clrsetbits_le32(info->base + conf_reg, |
Peng Fan | 63fbc59 | 2017-08-14 18:09:16 +0800 | [diff] [blame] | 160 | ~info->mux_mask, config_val); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 161 | } else { |
| 162 | writel(config_val, info->base + conf_reg); |
| 163 | } |
| 164 | |
| 165 | dev_dbg(dev, "write config: offset 0x%x val 0x%x\n", |
| 166 | conf_reg, config_val); |
| 167 | } |
| 168 | } |
| 169 | |
Peng Fan | c1d1e9d | 2017-05-11 17:34:14 +0800 | [diff] [blame] | 170 | devm_kfree(dev, pin_data); |
| 171 | |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 172 | return 0; |
| 173 | } |
| 174 | |
| 175 | const struct pinctrl_ops imx_pinctrl_ops = { |
| 176 | .set_state = imx_pinctrl_set_state, |
| 177 | }; |
| 178 | |
| 179 | int imx_pinctrl_probe(struct udevice *dev, |
| 180 | struct imx_pinctrl_soc_info *info) |
| 181 | { |
| 182 | struct imx_pinctrl_priv *priv = dev_get_priv(dev); |
Simon Glass | e160f7d | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 183 | int node = dev_of_offset(dev), ret; |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 184 | struct fdtdec_phandle_args arg; |
| 185 | fdt_addr_t addr; |
| 186 | fdt_size_t size; |
| 187 | |
| 188 | if (!info) { |
| 189 | dev_err(dev, "wrong pinctrl info\n"); |
| 190 | return -EINVAL; |
| 191 | } |
| 192 | |
| 193 | priv->dev = dev; |
| 194 | priv->info = info; |
| 195 | |
Simon Glass | e160f7d | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 196 | addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg", |
| 197 | &size); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 198 | |
| 199 | if (addr == FDT_ADDR_T_NONE) |
| 200 | return -EINVAL; |
| 201 | |
| 202 | info->base = map_sysmem(addr, size); |
| 203 | if (!info->base) |
| 204 | return -ENOMEM; |
| 205 | priv->info = info; |
| 206 | |
Peng Fan | 4aa9d4d0 | 2017-02-22 16:21:49 +0800 | [diff] [blame] | 207 | info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 208 | /* |
| 209 | * Refer to linux documentation for details: |
| 210 | * Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt |
| 211 | */ |
| 212 | if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) { |
| 213 | ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, |
| 214 | node, "fsl,input-sel", |
| 215 | NULL, 0, 0, &arg); |
| 216 | if (ret) { |
| 217 | dev_err(dev, "iomuxc fsl,input-sel property not found\n"); |
| 218 | return -EINVAL; |
| 219 | } |
| 220 | |
| 221 | addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg", |
| 222 | &size); |
| 223 | if (addr == FDT_ADDR_T_NONE) |
| 224 | return -EINVAL; |
| 225 | |
| 226 | info->input_sel_base = map_sysmem(addr, size); |
| 227 | if (!info->input_sel_base) |
| 228 | return -ENOMEM; |
| 229 | } |
| 230 | |
Stefan Agner | 5a6f8d7 | 2016-10-05 15:27:04 -0700 | [diff] [blame] | 231 | dev_dbg(dev, "initialized IMX pinctrl driver\n"); |
Peng Fan | 745df68 | 2016-02-03 10:06:07 +0800 | [diff] [blame] | 232 | |
| 233 | return 0; |
| 234 | } |
| 235 | |
| 236 | int imx_pinctrl_remove(struct udevice *dev) |
| 237 | { |
| 238 | struct imx_pinctrl_priv *priv = dev_get_priv(dev); |
| 239 | struct imx_pinctrl_soc_info *info = priv->info; |
| 240 | |
| 241 | if (info->input_sel_base) |
| 242 | unmap_sysmem(info->input_sel_base); |
| 243 | if (info->base) |
| 244 | unmap_sysmem(info->base); |
| 245 | |
| 246 | return 0; |
| 247 | } |