blob: e8a3ed0450343b0530563dafdcd6959e4a8095ab [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Mateusz Kulikowski626f0482016-03-31 23:12:33 +02002/*
3 * Board init file for Dragonboard 410C
4 *
5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Mateusz Kulikowski626f0482016-03-31 23:12:33 +02006 */
7
8#include <common.h>
9#include <dm.h>
10#include <usb.h>
11#include <asm/gpio.h>
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +010012#include <fdt_support.h>
Ramon Friedff06dc22018-08-03 16:25:37 +030013#include <environment.h>
Ramon Fried9beb4902018-07-31 12:29:58 +030014#include <asm/arch/dram.h>
Ramon Friedff06dc22018-08-03 16:25:37 +030015#include <asm/arch/misc.h>
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020016
17DECLARE_GLOBAL_DATA_PTR;
18
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +010019/* pointer to the device tree ammended by the firmware */
Jorge Ramirez-Ortiz9337dfb2018-01-10 11:34:38 +010020extern void *fw_dtb;
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +010021
Jorge Ramirez-Ortiz9337dfb2018-01-10 11:34:38 +010022void *board_fdt_blob_setup(void)
23{
24 if (fdt_magic(fw_dtb) != FDT_MAGIC) {
25 printf("Firmware provided invalid dtb!\n");
26 return NULL;
27 }
28
29 return fw_dtb;
30}
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +010031
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020032int dram_init(void)
33{
34 gd->ram_size = PHYS_SDRAM_1_SIZE;
Jorge Ramirez-Ortiz9337dfb2018-01-10 11:34:38 +010035
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020036 return 0;
37}
38
Simon Glass76b00ac2017-03-31 08:40:32 -060039int dram_init_banksize(void)
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020040{
41 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
42 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
Simon Glass76b00ac2017-03-31 08:40:32 -060043
44 return 0;
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020045}
46
Ramon Friedcd8c3ae2018-09-21 13:35:43 +030047int board_usb_init(int index, enum usb_init_type init)
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020048{
49 static struct udevice *pmic_gpio;
50 static struct gpio_desc hub_reset, usb_sel;
51 int ret = 0, node;
52
53 if (!pmic_gpio) {
54 ret = uclass_get_device_by_name(UCLASS_GPIO,
55 "pm8916_gpios@c000",
56 &pmic_gpio);
57 if (ret < 0) {
58 printf("Failed to find pm8916_gpios@c000 node.\n");
59 return ret;
60 }
61 }
62
63 /* Try to request gpios needed to start usb host on dragonboard */
64 if (!dm_gpio_is_valid(&hub_reset)) {
Simon Glasse160f7d2017-01-17 16:52:55 -070065 node = fdt_subnode_offset(gd->fdt_blob,
66 dev_of_offset(pmic_gpio),
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020067 "usb_hub_reset_pm");
68 if (node < 0) {
69 printf("Failed to find usb_hub_reset_pm dt node.\n");
70 return node;
71 }
Simon Glass150c5af2017-05-30 21:47:09 -060072 ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
73 "gpios", 0, &hub_reset, 0);
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020074 if (ret < 0) {
75 printf("Failed to request usb_hub_reset_pm gpio.\n");
76 return ret;
77 }
78 }
79
80 if (!dm_gpio_is_valid(&usb_sel)) {
Simon Glasse160f7d2017-01-17 16:52:55 -070081 node = fdt_subnode_offset(gd->fdt_blob,
82 dev_of_offset(pmic_gpio),
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020083 "usb_sw_sel_pm");
84 if (node < 0) {
85 printf("Failed to find usb_sw_sel_pm dt node.\n");
86 return 0;
87 }
Simon Glass150c5af2017-05-30 21:47:09 -060088 ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
89 "gpios", 0, &usb_sel, 0);
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020090 if (ret < 0) {
91 printf("Failed to request usb_sw_sel_pm gpio.\n");
92 return ret;
93 }
94 }
95
Ramon Friedcd8c3ae2018-09-21 13:35:43 +030096 if (init == USB_INIT_HOST) {
Mateusz Kulikowski626f0482016-03-31 23:12:33 +020097 /* Start USB Hub */
98 dm_gpio_set_dir_flags(&hub_reset,
99 GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
100 mdelay(100);
101 /* Switch usb to host connectors */
102 dm_gpio_set_dir_flags(&usb_sel,
103 GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
104 mdelay(100);
105 } else { /* Device */
106 /* Disable hub */
107 dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT);
108 /* Switch back to device connector */
109 dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT);
110 }
111
112 return 0;
113}
114
Mateusz Kulikowski626f0482016-03-31 23:12:33 +0200115/* Check for vol- button - if pressed - stop autoboot */
116int misc_init_r(void)
117{
118 struct udevice *pon;
119 struct gpio_desc resin;
120 int node, ret;
121
122 ret = uclass_get_device_by_name(UCLASS_GPIO, "pm8916_pon@800", &pon);
123 if (ret < 0) {
124 printf("Failed to find PMIC pon node. Check device tree\n");
125 return 0;
126 }
127
Simon Glasse160f7d2017-01-17 16:52:55 -0700128 node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pon),
129 "key_vol_down");
Mateusz Kulikowski626f0482016-03-31 23:12:33 +0200130 if (node < 0) {
131 printf("Failed to find key_vol_down node. Check device tree\n");
132 return 0;
133 }
134
Simon Glass150c5af2017-05-30 21:47:09 -0600135 if (gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0,
136 &resin, 0)) {
Mateusz Kulikowski626f0482016-03-31 23:12:33 +0200137 printf("Failed to request key_vol_down button.\n");
138 return 0;
139 }
140
141 if (dm_gpio_get_value(&resin)) {
Simon Glass382bee52017-08-03 12:22:09 -0600142 env_set("bootdelay", "-1");
Mateusz Kulikowski626f0482016-03-31 23:12:33 +0200143 printf("Power button pressed - dropping to console.\n");
144 }
145
146 return 0;
147}
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +0100148
149int board_init(void)
150{
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +0100151 return 0;
152}
153
Ramon Friedff06dc22018-08-03 16:25:37 +0300154/* Fixup of DTB for Linux Kernel
155 * 1. Fixup installed DRAM.
156 * 2. Fixup WLAN/BT Mac address:
157 * First, check if MAC addresses for WLAN/BT exists as environemnt
158 * variables wlanaddr,btaddr. if not, generate a unique address.
159 */
160
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +0100161int ft_board_setup(void *blob, bd_t *bd)
162{
Ramon Friedff06dc22018-08-03 16:25:37 +0300163 u8 mac[ARP_HLEN];
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +0100164
Ramon Fried9beb4902018-07-31 12:29:58 +0300165 msm_fixup_memory(blob);
166
Ramon Friedff06dc22018-08-03 16:25:37 +0300167 if (!eth_env_get_enetaddr("wlanaddr", mac)) {
168 msm_generate_mac_addr(mac);
169 };
170
171 do_fixup_by_compat(blob, "qcom,wcnss-wlan",
172 "local-mac-address", mac, ARP_HLEN, 1);
173
174
175 if (!eth_env_get_enetaddr("btaddr", mac)) {
176 msm_generate_mac_addr(mac);
177
178/* The BD address is same as WLAN MAC address but with
179 * least significant bit flipped.
180 */
181 mac[0] ^= 0x01;
182 };
183
184 do_fixup_by_compat(blob, "qcom,wcnss-bt",
185 "local-bd-address", mac, ARP_HLEN, 1);
Jorge Ramirez-Ortize2beb872018-01-10 11:34:35 +0100186 return 0;
187}
Jorge Ramirez-Ortiz0689eb72018-01-10 11:34:36 +0100188
189void reset_cpu(ulong addr)
190{
191 psci_system_reset();
192}