blob: 92a6bfdc011d78e7f944a3b752e324cd86789cba [file] [log] [blame]
Dave Gerlachb6059dd2021-04-23 11:27:46 -05001// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/dts-v1/;
7
8#include "k3-am642.dtsi"
Dave Gerlachfe0f3e32021-05-04 18:00:52 -05009#include "k3-am64-evm-ddr4-1600MTs.dtsi"
10#include "k3-am64-ddr.dtsi"
Dave Gerlachb6059dd2021-04-23 11:27:46 -050011
12/ {
13 chosen {
14 stdout-path = "serial2:115200n8";
15 tick-timer = &timer1;
16 };
17
18 aliases {
19 remoteproc0 = &sysctrler;
20 remoteproc1 = &a53_0;
21 };
22
23 memory@80000000 {
24 device_type = "memory";
25 /* 2G RAM */
26 reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
27
Dave Gerlachadbe1382022-03-17 12:03:39 -050028 u-boot,dm-spl;
Dave Gerlachb6059dd2021-04-23 11:27:46 -050029 };
30
31 a53_0: a53@0 {
32 compatible = "ti,am654-rproc";
33 reg = <0x00 0x00a90000 0x00 0x10>;
34 power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
35 <&k3_pds 135 TI_SCI_PD_EXCLUSIVE>;
36 resets = <&k3_reset 135 0>;
37 clocks = <&k3_clks 61 0>;
38 assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>;
39 assigned-clock-parents = <&k3_clks 61 2>;
40 assigned-clock-rates = <200000000>, <1000000000>;
41 ti,sci = <&dmsc>;
42 ti,sci-proc-id = <32>;
43 ti,sci-host-id = <10>;
44 u-boot,dm-spl;
45 };
46
47 reserved-memory {
48 #address-cells = <2>;
49 #size-cells = <2>;
50 ranges;
51
52 secure_ddr: optee@9e800000 {
53 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
54 alignment = <0x1000>;
55 no-map;
56 };
57 };
58
59 clk_200mhz: dummy-clock-200mhz {
60 compatible = "fixed-clock";
61 #clock-cells = <0>;
62 clock-frequency = <200000000>;
63 u-boot,dm-spl;
64 };
Nishanth Menonab4c0722021-05-04 18:00:55 -050065
66 vtt_supply: vtt-supply {
67 compatible = "regulator-gpio";
68 regulator-name = "vtt";
69 regulator-min-microvolt = <0>;
70 regulator-max-microvolt = <3300000>;
71 gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
72 states = <0 0x0 3300000 0x1>;
73 u-boot,dm-spl;
74 };
Dave Gerlachb6059dd2021-04-23 11:27:46 -050075};
76
77&cbass_main {
78 sysctrler: sysctrler {
79 compatible = "ti,am654-system-controller";
80 mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>;
81 mbox-names = "tx", "rx";
82 u-boot,dm-spl;
83 };
84};
85
Hari Nagalla3d64cff2022-03-09 14:42:29 -060086&cbass_main {
87 main_esm: esm@420000 {
88 compatible = "ti,j721e-esm";
89 reg = <0x0 0x420000 0x0 0x1000>;
90 ti,esm-pins = <160>, <161>;
91 u-boot,dm-spl;
92 };
93};
94
95&cbass_mcu {
96 u-boot,dm-spl;
97 mcu_esm: esm@4100000 {
98 compatible = "ti,j721e-esm";
99 reg = <0x0 0x4100000 0x0 0x1000>;
100 ti,esm-pins = <0>, <1>;
101 u-boot,dm-spl;
102 };
103};
104
Dave Gerlachb6059dd2021-04-23 11:27:46 -0500105&main_pmx0 {
106 u-boot,dm-spl;
107 main_uart0_pins_default: main-uart0-pins-default {
108 u-boot,dm-spl;
109 pinctrl-single,pins = <
110 AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
111 AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
112 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
113 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
114 >;
115 };
116
117 main_uart1_pins_default: main-uart1-pins-default {
118 u-boot,dm-spl;
119 pinctrl-single,pins = <
120 AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
121 AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
122 AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
123 AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
124 >;
125 };
126
127 main_mmc0_pins_default: main-mmc0-pins-default {
128 u-boot,dm-spl;
129 pinctrl-single,pins = <
130 AM64X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
131 AM64X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
132 AM64X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
133 AM64X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
134 AM64X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
135 AM64X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
136 AM64X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
137 AM64X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
138 AM64X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
139 AM64X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
140 AM64X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
141 >;
142 };
143
144 main_mmc1_pins_default: main-mmc1-pins-default {
145 u-boot,dm-spl;
146 pinctrl-single,pins = <
147 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
148 AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
149 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
150 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
151 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
152 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
153 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
154 AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
155 >;
156 };
Nishanth Menonab4c0722021-05-04 18:00:55 -0500157
158 ddr_vtt_pins_default: ddr-vtt-pins-default {
159 u-boot,dm-spl;
160 pinctrl-single,pins = <
161 AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
162 >;
163 };
Aswath Govindraju7803a5b2021-06-04 22:00:36 +0530164
165 main_usb0_pins_default: main-usb0-pins-default {
166 pinctrl-single,pins = <
167 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
168 >;
169 };
Dave Gerlachb6059dd2021-04-23 11:27:46 -0500170};
171
172&dmsc {
173 mboxes= <&secure_proxy_main 0>,
174 <&secure_proxy_main 1>,
175 <&secure_proxy_main 0>;
176 mbox-names = "rx", "tx", "notify";
177 ti,host-id = <35>;
178 ti,secure-host;
179};
180
181&main_uart0 {
182 /delete-property/ power-domains;
183 /delete-property/ clocks;
184 /delete-property/ clock-names;
185 pinctrl-names = "default";
186 pinctrl-0 = <&main_uart0_pins_default>;
187 status = "okay";
188};
189
190&main_uart1 {
191 u-boot,dm-spl;
192 pinctrl-names = "default";
193 pinctrl-0 = <&main_uart1_pins_default>;
194};
195
Nishanth Menonab4c0722021-05-04 18:00:55 -0500196&memorycontroller {
197 vtt-supply = <&vtt_supply>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&ddr_vtt_pins_default>;
200};
201
Dave Gerlachb6059dd2021-04-23 11:27:46 -0500202&sdhci0 {
203 /delete-property/ power-domains;
204 clocks = <&clk_200mhz>;
205 clock-names = "clk_xin";
206 ti,driver-strength-ohm = <50>;
207 disable-wp;
208 pinctrl-0 = <&main_mmc0_pins_default>;
209};
210
211&sdhci1 {
212 /delete-property/ power-domains;
213 clocks = <&clk_200mhz>;
214 clock-names = "clk_xin";
215 ti,driver-strength-ohm = <50>;
216 disable-wp;
217 pinctrl-0 = <&main_mmc1_pins_default>;
218};
219
Nishanth Menonab4c0722021-05-04 18:00:55 -0500220&main_gpio0 {
221 u-boot,dm-spl;
222 /delete-property/ power-domains;
223};
224
Lokesh Vutlae922b5a2021-05-06 16:44:57 +0530225/* EEPROM might be read before SYSFW is available */
226&main_i2c0 {
227 /delete-property/ power-domains;
228};
229
Aswath Govindraju7803a5b2021-06-04 22:00:36 +0530230&usbss0 {
231 ti,vbus-divider;
232 ti,usb2-only;
233};
234
235&usb0 {
236 dr_mode = "otg";
237 maximum-speed = "high-speed";
238 pinctrl-names = "default";
239 pinctrl-0 = <&main_usb0_pins_default>;
240};
241
Dave Gerlachb6059dd2021-04-23 11:27:46 -0500242#include "k3-am642-evm-u-boot.dtsi"