blob: d6a010355bb88014699475ae952df5a2c1e51126 [file] [log] [blame]
Michal Simek10aaa352018-03-28 15:00:25 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * dts file for Xilinx ZynqMP zc1751-xm017-dc3
4 *
5 * (C) Copyright 2016 - 2018, Xilinx, Inc.
6 *
7 * Michal Simek <michal.simek@xilinx.com>
8 */
9
10/dts-v1/;
11
12#include "zynqmp.dtsi"
13#include "zynqmp-clk-ccf.dtsi"
14
15/ {
16 model = "ZynqMP zc1751-xm017-dc3 RevA";
17 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
18
19 aliases {
20 ethernet0 = &gem0;
21 gpio0 = &gpio;
22 i2c0 = &i2c0;
23 i2c1 = &i2c1;
24 mmc0 = &sdhci1;
25 rtc0 = &rtc;
26 serial0 = &uart0;
27 serial1 = &uart1;
28 usb0 = &usb0;
29 usb1 = &usb1;
30 };
31
32 chosen {
33 bootargs = "earlycon";
34 stdout-path = "serial0:115200n8";
35 };
36
37 memory@0 {
38 device_type = "memory";
39 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
40 };
41};
42
43&fpd_dma_chan1 {
44 status = "okay";
45};
46
47&fpd_dma_chan2 {
48 status = "okay";
49};
50
51&fpd_dma_chan3 {
52 status = "okay";
53};
54
55&fpd_dma_chan4 {
56 status = "okay";
57};
58
59&fpd_dma_chan5 {
60 status = "okay";
61};
62
63&fpd_dma_chan6 {
64 status = "okay";
65};
66
67&fpd_dma_chan7 {
68 status = "okay";
69};
70
71&fpd_dma_chan8 {
72 status = "okay";
73};
74
75&gem0 {
76 status = "okay";
77 phy-handle = <&phy0>;
78 phy-mode = "rgmii-id";
79 phy0: phy@0 { /* VSC8211 */
80 reg = <0>;
81 };
82};
83
84&gpio {
85 status = "okay";
86};
87
88/* just eeprom here */
89&i2c0 {
90 status = "okay";
91 clock-frequency = <400000>;
92
93 tca6416_u26: gpio@20 {
94 compatible = "ti,tca6416";
95 reg = <0x20>;
96 gpio-controller;
97 #gpio-cells = <2>;
98 /* IRQ not connected */
99 };
100
101 rtc@68 {
102 compatible = "dallas,ds1339";
103 reg = <0x68>;
104 };
105};
106
107/* eeprom24c02 and SE98A temp chip pca9306 */
108&i2c1 {
109 status = "okay";
110 clock-frequency = <400000>;
111};
112
113/* MT29F64G08AECDBJ4-6 */
114&nand0 {
115 status = "okay";
116 arasan,has-mdma;
117 num-cs = <2>;
118
119 partition@0 { /* for testing purpose */
120 label = "nand-fsbl-uboot";
121 reg = <0x0 0x0 0x400000>;
122 };
123 partition@1 { /* for testing purpose */
124 label = "nand-linux";
125 reg = <0x0 0x400000 0x1400000>;
126 };
127 partition@2 { /* for testing purpose */
128 label = "nand-device-tree";
129 reg = <0x0 0x1800000 0x400000>;
130 };
131 partition@3 { /* for testing purpose */
132 label = "nand-rootfs";
133 reg = <0x0 0x1C00000 0x1400000>;
134 };
135 partition@4 { /* for testing purpose */
136 label = "nand-bitstream";
137 reg = <0x0 0x3000000 0x400000>;
138 };
139 partition@5 { /* for testing purpose */
140 label = "nand-misc";
141 reg = <0x0 0x3400000 0xFCC00000>;
142 };
143
144 partition@6 { /* for testing purpose */
145 label = "nand1-fsbl-uboot";
146 reg = <0x1 0x0 0x400000>;
147 };
148 partition@7 { /* for testing purpose */
149 label = "nand1-linux";
150 reg = <0x1 0x400000 0x1400000>;
151 };
152 partition@8 { /* for testing purpose */
153 label = "nand1-device-tree";
154 reg = <0x1 0x1800000 0x400000>;
155 };
156 partition@9 { /* for testing purpose */
157 label = "nand1-rootfs";
158 reg = <0x1 0x1C00000 0x1400000>;
159 };
160 partition@10 { /* for testing purpose */
161 label = "nand1-bitstream";
162 reg = <0x1 0x3000000 0x400000>;
163 };
164 partition@11 { /* for testing purpose */
165 label = "nand1-misc";
166 reg = <0x1 0x3400000 0xFCC00000>;
167 };
168};
169
170&rtc {
171 status = "okay";
172};
173
174&sata {
175 status = "okay";
176 /* SATA phy OOB timing settings */
177 ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
178 ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
179 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
180 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
181 ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
182 ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
183 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
184 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
185};
186
187&sdhci1 { /* emmc with some settings */
188 status = "okay";
189};
190
191/* main */
192&uart0 {
193 status = "okay";
194};
195
196/* DB9 */
197&uart1 {
198 status = "okay";
199};
200
201&usb0 {
202 status = "okay";
203 dr_mode = "host";
204};
205
206/* ULPI SMSC USB3320 */
207&usb1 {
208 status = "okay";
209 dr_mode = "host";
210};