blob: 2359656a239a5b39f8499d6d2eff2fefa2b11288 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +02002/*
3 * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
4 *
5 * Derived from linux/drivers/tty/serial/bcm63xx_uart.c:
6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +02007 */
8
9#include <clk.h>
Simon Glass9d922452017-05-17 17:18:03 -060010#include <dm.h>
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +020011#include <debug_uart.h>
12#include <errno.h>
Simon Glass336d4612020-02-03 07:36:16 -070013#include <malloc.h>
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +020014#include <serial.h>
15#include <asm/io.h>
16#include <asm/types.h>
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +020017
18/* UART Control register */
19#define UART_CTL_REG 0x0
20#define UART_CTL_RXTIMEOUT_MASK 0x1f
21#define UART_CTL_RXTIMEOUT_5 0x5
22#define UART_CTL_RSTRXFIFO_SHIFT 6
23#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT)
24#define UART_CTL_RSTTXFIFO_SHIFT 7
25#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT)
26#define UART_CTL_STOPBITS_SHIFT 8
27#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT)
28#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT)
29#define UART_CTL_BITSPERSYM_SHIFT 12
30#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT)
31#define UART_CTL_BITSPERSYM_8 (0x3 << UART_CTL_BITSPERSYM_SHIFT)
32#define UART_CTL_XMITBRK_SHIFT 14
33#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT)
34#define UART_CTL_RSVD_SHIFT 15
35#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT)
36#define UART_CTL_RXPAREVEN_SHIFT 16
37#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT)
38#define UART_CTL_RXPAREN_SHIFT 17
39#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT)
40#define UART_CTL_TXPAREVEN_SHIFT 18
41#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT)
42#define UART_CTL_TXPAREN_SHIFT 19
43#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT)
44#define UART_CTL_LOOPBACK_SHIFT 20
45#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT)
46#define UART_CTL_RXEN_SHIFT 21
47#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT)
48#define UART_CTL_TXEN_SHIFT 22
49#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT)
50#define UART_CTL_BRGEN_SHIFT 23
51#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT)
52
53/* UART Baudword register */
54#define UART_BAUD_REG 0x4
55
56/* UART FIFO Config register */
57#define UART_FIFO_CFG_REG 0x8
58#define UART_FIFO_CFG_RX_SHIFT 8
59#define UART_FIFO_CFG_RX_MASK (0xf << UART_FIFO_CFG_RX_SHIFT)
60#define UART_FIFO_CFG_RX_4 (0x4 << UART_FIFO_CFG_RX_SHIFT)
61#define UART_FIFO_CFG_TX_SHIFT 12
62#define UART_FIFO_CFG_TX_MASK (0xf << UART_FIFO_CFG_TX_SHIFT)
63#define UART_FIFO_CFG_TX_4 (0x4 << UART_FIFO_CFG_TX_SHIFT)
64
65/* UART Interrupt register */
66#define UART_IR_REG 0x10
67#define UART_IR_STAT(x) (1 << (x))
68#define UART_IR_TXEMPTY 5
69#define UART_IR_RXOVER 7
70#define UART_IR_RXNOTEMPTY 11
71
72/* UART FIFO register */
73#define UART_FIFO_REG 0x14
74#define UART_FIFO_VALID_MASK 0xff
75#define UART_FIFO_FRAMEERR_SHIFT 8
76#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT)
77#define UART_FIFO_PARERR_SHIFT 9
78#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT)
79#define UART_FIFO_BRKDET_SHIFT 10
80#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT)
81#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \
82 UART_FIFO_PARERR_MASK | \
83 UART_FIFO_BRKDET_MASK)
84
85struct bcm6345_serial_priv {
86 void __iomem *base;
87 ulong uartclk;
88};
89
90/* enable rx & tx operation on uart */
91static void bcm6345_serial_enable(void __iomem *base)
92{
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +010093 setbits_32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
94 UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +020095}
96
97/* disable rx & tx operation on uart */
98static void bcm6345_serial_disable(void __iomem *base)
99{
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100100 clrbits_32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
101 UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200102}
103
104/* clear all unread data in rx fifo and unsent data in tx fifo */
105static void bcm6345_serial_flush(void __iomem *base)
106{
107 /* empty rx and tx fifo */
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100108 setbits_32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK |
109 UART_CTL_RSTTXFIFO_MASK);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200110
111 /* read any pending char to make sure all irq status are cleared */
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100112 readl(base + UART_FIFO_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200113}
114
115static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate)
116{
117 u32 val;
118
119 /* mask all irq and flush port */
120 bcm6345_serial_disable(base);
121 bcm6345_serial_flush(base);
122
123 /* set uart control config */
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100124 clrsetbits_32(base + UART_CTL_REG,
125 /* clear rx timeout */
126 UART_CTL_RXTIMEOUT_MASK |
127 /* clear stop bits */
128 UART_CTL_STOPBITS_MASK |
129 /* clear bits per symbol */
130 UART_CTL_BITSPERSYM_MASK |
131 /* clear xmit break */
132 UART_CTL_XMITBRK_MASK |
133 /* clear reserved bit */
134 UART_CTL_RSVD_MASK |
135 /* disable parity */
136 UART_CTL_RXPAREN_MASK |
137 UART_CTL_TXPAREN_MASK |
138 /* disable loopback */
139 UART_CTL_LOOPBACK_MASK,
140 /* set timeout to 5 */
141 UART_CTL_RXTIMEOUT_5 |
142 /* set 8 bits/symbol */
143 UART_CTL_BITSPERSYM_8 |
144 /* set 1 stop bit */
145 UART_CTL_STOPBITS_1 |
146 /* set parity to even */
147 UART_CTL_RXPAREVEN_MASK |
148 UART_CTL_TXPAREVEN_MASK);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200149
150 /* set uart fifo config */
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100151 clrsetbits_32(base + UART_FIFO_CFG_REG,
152 /* clear fifo config */
153 UART_FIFO_CFG_RX_MASK |
154 UART_FIFO_CFG_TX_MASK,
155 /* set fifo config to 4 */
156 UART_FIFO_CFG_RX_4 |
157 UART_FIFO_CFG_TX_4);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200158
159 /* set baud rate */
Álvaro Fernández Rojas24f85482017-05-22 20:01:46 +0200160 val = ((clk / baudrate) >> 4);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200161 if (val & 0x1)
Álvaro Fernández Rojas24f85482017-05-22 20:01:46 +0200162 val = (val >> 1);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200163 else
Álvaro Fernández Rojas24f85482017-05-22 20:01:46 +0200164 val = (val >> 1) - 1;
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100165 writel(val, base + UART_BAUD_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200166
167 /* clear interrupts */
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100168 writel(0, base + UART_IR_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200169
170 /* enable uart */
171 bcm6345_serial_enable(base);
172
173 return 0;
174}
175
176static int bcm6345_serial_pending(struct udevice *dev, bool input)
177{
178 struct bcm6345_serial_priv *priv = dev_get_priv(dev);
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100179 u32 val = readl(priv->base + UART_IR_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200180
181 if (input)
182 return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY));
183 else
184 return !(val & UART_IR_STAT(UART_IR_TXEMPTY));
185}
186
187static int bcm6345_serial_setbrg(struct udevice *dev, int baudrate)
188{
189 struct bcm6345_serial_priv *priv = dev_get_priv(dev);
190
191 return bcm6345_serial_init(priv->base, priv->uartclk, baudrate);
192}
193
194static int bcm6345_serial_putc(struct udevice *dev, const char ch)
195{
196 struct bcm6345_serial_priv *priv = dev_get_priv(dev);
197 u32 val;
198
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100199 val = readl(priv->base + UART_IR_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200200 if (!(val & UART_IR_STAT(UART_IR_TXEMPTY)))
201 return -EAGAIN;
202
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100203 writel(ch, priv->base + UART_FIFO_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200204
205 return 0;
206}
207
208static int bcm6345_serial_getc(struct udevice *dev)
209{
210 struct bcm6345_serial_priv *priv = dev_get_priv(dev);
211 u32 val;
212
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100213 val = readl(priv->base + UART_IR_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200214 if (val & UART_IR_STAT(UART_IR_RXOVER))
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100215 setbits_32(priv->base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200216 if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
217 return -EAGAIN;
218
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100219 val = readl(priv->base + UART_FIFO_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200220 if (val & UART_FIFO_ANYERR_MASK)
221 return -EAGAIN;
222
223 return val & UART_FIFO_VALID_MASK;
224}
225
226static int bcm6345_serial_probe(struct udevice *dev)
227{
228 struct bcm6345_serial_priv *priv = dev_get_priv(dev);
229 struct clk clk;
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200230 int ret;
231
232 /* get address */
Álvaro Fernández Rojas0f569932018-03-22 19:39:29 +0100233 priv->base = dev_remap_addr(dev);
234 if (!priv->base)
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200235 return -EINVAL;
236
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200237 /* get clock rate */
238 ret = clk_get_by_index(dev, 0, &clk);
239 if (ret < 0)
240 return ret;
Álvaro Fernández Rojas24f85482017-05-22 20:01:46 +0200241 priv->uartclk = clk_get_rate(&clk);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200242 clk_free(&clk);
243
244 /* initialize serial */
245 return bcm6345_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE);
246}
247
248static const struct dm_serial_ops bcm6345_serial_ops = {
249 .putc = bcm6345_serial_putc,
250 .pending = bcm6345_serial_pending,
251 .getc = bcm6345_serial_getc,
252 .setbrg = bcm6345_serial_setbrg,
253};
254
255static const struct udevice_id bcm6345_serial_ids[] = {
256 { .compatible = "brcm,bcm6345-uart" },
257 { /* sentinel */ }
258};
259
260U_BOOT_DRIVER(bcm6345_serial) = {
261 .name = "bcm6345-uart",
262 .id = UCLASS_SERIAL,
263 .of_match = bcm6345_serial_ids,
264 .probe = bcm6345_serial_probe,
Simon Glass41575d82020-12-03 16:55:17 -0700265 .priv_auto = sizeof(struct bcm6345_serial_priv),
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200266 .ops = &bcm6345_serial_ops,
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200267};
268
269#ifdef CONFIG_DEBUG_UART_BCM6345
270static inline void _debug_uart_init(void)
271{
Pali Rohárb62450c2022-05-27 22:15:24 +0200272 void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200273
274 bcm6345_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
275}
276
277static inline void wait_xfered(void __iomem *base)
278{
279 do {
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100280 u32 val = readl(base + UART_IR_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200281 if (val & UART_IR_STAT(UART_IR_TXEMPTY))
282 break;
283 } while (1);
284}
285
286static inline void _debug_uart_putc(int ch)
287{
Pali Rohárb62450c2022-05-27 22:15:24 +0200288 void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200289
290 wait_xfered(base);
Álvaro Fernández Rojas09ace912018-12-01 18:42:07 +0100291 writel(ch, base + UART_FIFO_REG);
Álvaro Fernández Rojas30581042017-04-25 00:39:16 +0200292 wait_xfered(base);
293}
294
295DEBUG_UART_FUNCS
296#endif