blob: 80b7811f7be8caa2b7fa68bb54be0fc906166313 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001# SPDX-License-Identifier: GPL-2.0+
Tom Rinida58dec2015-11-10 01:06:16 +00002
Tom Rinid452f272018-12-03 23:50:13 -05003VERSION = 2019
Tom Rinid0d07ba2019-07-29 21:16:16 -04004PATCHLEVEL = 10
Wolfgang Denk211e4752012-07-10 09:21:12 +02005SUBLEVEL =
Tom Rini61ba1242019-10-07 17:14:02 -04006EXTRAVERSION =
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +09007NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +01008
Masahiro Yamada6825a952014-02-04 17:24:28 +09009# *DOCUMENTATION*
10# To see a list of typical targets execute "make help"
11# More info can be located in ./README
12# Comments in this file are targeted only to the developer, do not
13# expect to learn how to build the kernel reading this file.
14
Masahiro Yamada4d713be2015-07-05 01:56:57 +090015# o Do not use make's built-in rules and variables
16# (this increases performance and avoids hard-to-debug behaviour);
17# o Look for make include files relative to root of kernel src
18MAKEFLAGS += -rR --include-dir=$(CURDIR)
Masahiro Yamada6825a952014-02-04 17:24:28 +090019
20# Avoid funny character set dependencies
21unexport LC_ALL
22LC_COLLATE=C
23LC_NUMERIC=C
24export LC_COLLATE LC_NUMERIC
25
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090026# Avoid interference with shell env settings
27unexport GREP_OPTIONS
28
Masahiro Yamada6825a952014-02-04 17:24:28 +090029# We are using a recursive build, so we need to do a little thinking
30# to get the ordering right.
31#
32# Most importantly: sub-Makefiles should only ever modify files in
33# their own directory. If in some directory we have a dependency on
34# a file in another dir (which doesn't happen often, but it's often
35# unavoidable when linking the built-in.o targets which finally
36# turn into vmlinux), we will call a sub make in that other dir, and
37# after that we are sure that everything which is in that other dir
38# is now up to date.
39#
40# The only cases where we need to modify files which have global
41# effects are thus separated out and done before the recursive
42# descending is started. They are now explicitly listed as the
43# prepare rule.
44
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090045# Beautify output
46# ---------------------------------------------------------------------------
47#
48# Normally, we echo the whole command before executing it. By making
49# that echo $($(quiet)$(cmd)), we now have the possibility to set
50# $(quiet) to choose other forms of output instead, e.g.
51#
52# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
53# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
54#
55# If $(quiet) is empty, the whole command will be printed.
56# If it is set to "quiet_", only the short version will be printed.
57# If it is set to "silent_", nothing will be printed at all, since
58# the variable $(silent_cmd_cc_o_c) doesn't exist.
59#
60# A simple variant is to prefix commands with $(Q) - that's useful
61# for commands that shall be hidden in non-verbose mode.
62#
63# $(Q)ln $@ :<
64#
65# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
66# If KBUILD_VERBOSE equals 1 then the above command is displayed.
67#
Masahiro Yamada6825a952014-02-04 17:24:28 +090068# To put more focus on warnings, be less verbose as default
69# Use 'make V=1' to see the full commands
70
71ifeq ("$(origin V)", "command line")
72 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000073endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090074ifndef KBUILD_VERBOSE
75 KBUILD_VERBOSE = 0
76endif
77
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090078ifeq ($(KBUILD_VERBOSE),1)
79 quiet =
80 Q =
81else
82 quiet=quiet_
83 Q = @
Masahiro Yamada6825a952014-02-04 17:24:28 +090084endif
85
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090086# If the user is running make -s (silent mode), suppress echoing of
87# commands
88
89ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
90ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
91 quiet=silent_
92endif
93else # make-3.8x
94ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
95 quiet=silent_
96endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090097endif
98
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090099export quiet Q KBUILD_VERBOSE
Masahiro Yamada6825a952014-02-04 17:24:28 +0900100
Masahiro Yamada9e414032014-02-04 17:24:24 +0900101# kbuild supports saving output files in a separate directory.
102# To locate output files in a separate directory two syntaxes are supported.
103# In both cases the working directory must be the root of the kernel src.
104# 1) O=
105# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +0200106#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900107# 2) Set KBUILD_OUTPUT
108# Set the environment variable KBUILD_OUTPUT to point to the directory
109# where the output files shall be placed.
110# export KBUILD_OUTPUT=dir/to/store/output/files/
111# make
Stefan Roese887e2ec2006-09-07 11:51:23 +0200112#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900113# The O= assignment takes precedence over the KBUILD_OUTPUT environment
114# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000115
Masahiro Yamada9e414032014-02-04 17:24:24 +0900116# KBUILD_SRC is set on invocation of make in OBJ directory
117# KBUILD_SRC is not intended to be used by the regular user (for now)
118ifeq ($(KBUILD_SRC),)
119
120# OK, Make called in directory where kernel src resides
121# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200122ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900123 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200124endif
wdenk7ebf7442002-11-02 23:17:16 +0000125
Masahiro Yamada9e414032014-02-04 17:24:24 +0900126# That's our default target when none is given on the command line
127PHONY := _all
128_all:
129
130# Cancel implicit rules on top Makefile
131$(CURDIR)/Makefile Makefile: ;
132
133ifneq ($(KBUILD_OUTPUT),)
134# Invoke a second make in the output directory, passing relevant variables
135# check that the output directory actually exists
136saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900137KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
138 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900139$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900140 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900141
142PHONY += $(MAKECMDGOALS) sub-make
143
144$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
145 @:
146
147sub-make: FORCE
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900148 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
149 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900150
151# Leave processing to above invocation of make
152skip-makefile := 1
153endif # ifneq ($(KBUILD_OUTPUT),)
154endif # ifeq ($(KBUILD_SRC),)
155
156# We process the rest of the Makefile if this is the final invocation of make
157ifeq ($(skip-makefile),)
158
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900159# Do not print "Entering directory ...",
160# but we want to display it when entering to the output directory
161# so that IDEs/editors are able to understand relative filenames.
162MAKEFLAGS += --no-print-directory
163
164# Call a source code checker (by default, "sparse") as part of the
165# C compilation.
166#
167# Use 'make C=1' to enable checking of only re-compiled files.
168# Use 'make C=2' to enable checking of *all* source files, regardless
169# of whether they are re-compiled or not.
170#
Breno Matheus Lima656d8da2019-06-05 18:18:30 +0000171# See the file "doc/sparse.txt" for more details, including
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900172# where to get the "sparse" utility.
173
174ifeq ("$(origin C)", "command line")
175 KBUILD_CHECKSRC = $(C)
176endif
177ifndef KBUILD_CHECKSRC
178 KBUILD_CHECKSRC = 0
179endif
180
181# Use make M=dir to specify directory of external module to build
182# Old syntax make ... SUBDIRS=$PWD is still supported
183# Setting the environment variable KBUILD_EXTMOD take precedence
184ifdef SUBDIRS
185 KBUILD_EXTMOD ?= $(SUBDIRS)
186endif
187
188ifeq ("$(origin M)", "command line")
189 KBUILD_EXTMOD := $(M)
190endif
191
Masahiro Yamada6825a952014-02-04 17:24:28 +0900192# If building an external module we do not care about the all: rule
193# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900194PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900195ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900196_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900197else
198_all: modules
199endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900200
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900201ifeq ($(KBUILD_SRC),)
202 # building in the source tree
203 srctree := .
204else
205 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
206 # building in a subdirectory of the source tree
207 srctree := ..
208 else
209 srctree := $(KBUILD_SRC)
210 endif
211endif
212objtree := .
Masahiro Yamada9e414032014-02-04 17:24:24 +0900213src := $(srctree)
214obj := $(objtree)
215
216VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
217
218export srctree objtree VPATH
219
Wolfgang Denk5013c092008-03-02 22:45:33 +0100220# Make sure CDPATH settings don't interfere
221unexport CDPATH
222
Marian Balakowiczf9328632006-09-01 19:49:50 +0200223#########################################################################
224
wdenk7ebf7442002-11-02 23:17:16 +0000225HOSTARCH := $(shell uname -m | \
226 sed -e s/i.86/x86/ \
227 -e s/sun4u/sparc64/ \
228 -e s/arm.*/arm/ \
229 -e s/sa110/arm/ \
230 -e s/ppc64/powerpc/ \
231 -e s/ppc/powerpc/ \
232 -e s/macppc/powerpc/\
233 -e s/sh.*/sh/)
234
235HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
236 sed -e 's/\(cygwin\).*/cygwin/')
237
238export HOSTARCH HOSTOS
239
wdenk7ebf7442002-11-02 23:17:16 +0000240#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200241
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400242# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100243ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400244CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000245endif
wdenk7ebf7442002-11-02 23:17:16 +0000246
Masahiro Yamada51148792014-07-30 14:08:17 +0900247KCONFIG_CONFIG ?= .config
248export KCONFIG_CONFIG
249
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900250# SHELL used by kbuild
251CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
252 else if [ -x /bin/bash ]; then echo /bin/bash; \
253 else echo sh; fi ; fi)
254
Jeroen Hofsteeb477fe42014-09-10 20:08:51 +0200255HOSTCC = cc
256HOSTCXX = c++
Simon Glass022885c2016-06-30 10:52:20 -0600257HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
258 $(if $(CONFIG_TOOLS_DEBUG),-g)
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900259HOSTCXXFLAGS = -O2
260
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200261# With the move to GCC 6, we have implicitly upgraded our language
262# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
263# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
264# have older compilers as their default, so we make it explicit for
265# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
Tom Rinifa893992018-06-19 23:53:54 -0400266CSTD_FLAG := -std=gnu11
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200267ifeq ($(HOSTOS),linux)
Tom Rinifa893992018-06-19 23:53:54 -0400268HOSTCFLAGS += $(CSTD_FLAG)
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200269endif
270
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900271ifeq ($(HOSTOS),cygwin)
272HOSTCFLAGS += -ansi
273endif
274
275# Mac OS X / Darwin's C preprocessor is Apple specific. It
276# generates numerous errors and warnings. We want to bypass it
277# and use GNU C's cpp. To do this we pass the -traditional-cpp
278# option to the compiler. Note that the -traditional-cpp flag
279# DOES NOT have the same semantics as GNU C's flag, all it does
280# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
281#
282# Apple's linker is similar, thanks to the new 2 stage linking
283# multiple symbol definitions are treated as errors, hence the
284# -multiply_defined suppress option to turn off this error.
285#
286ifeq ($(HOSTOS),darwin)
287# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
288DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
289DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
290
291os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
292 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
293
默默ab8fc412019-03-31 16:07:03 +0800294os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
295 $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
296
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900297# Snow Leopards build environment has no longer restrictions as described above
298HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
299HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
300HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
Andreas Bießmann1fddd7b2015-02-09 00:06:10 +0100301
302# since Lion (10.7) ASLR is on by default, but we use linker generated lists
303# in some host tools which is a problem then ... so disable ASLR for these
304# tools
305HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
默默ab8fc412019-03-31 16:07:03 +0800306
307# macOS Mojave (10.14.X)
308# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
309HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900310endif
311
Masahiro Yamada6825a952014-02-04 17:24:28 +0900312# Decide whether to build built-in, modular, or both.
313# Normally, just do built-in.
314
315KBUILD_MODULES :=
316KBUILD_BUILTIN := 1
317
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900318# If we have only "make modules", don't compile built-in objects.
319# When we're building modules with modversions, we need to consider
320# the built-in objects during the descend as well, in order to
321# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900322
323ifeq ($(MAKECMDGOALS),modules)
324 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
325endif
326
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900327# If we have "make <whatever> modules", compile modules
328# in addition to whatever we do anyway.
329# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900330
331# U-Boot does not need modules
332#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
333# KBUILD_MODULES := 1
334#endif
335
336#ifeq ($(MAKECMDGOALS),)
337# KBUILD_MODULES := 1
338#endif
339
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200340define size_check
341 actual=$$( wc -c $1 | awk '{print $$1}'); \
342 limit=$$( printf "%d" $2 ); \
343 if test $$actual -gt $$limit; then \
344 echo "$1 exceeds file size limit:" >&2; \
345 echo " limit: $$limit bytes" >&2; \
346 echo " actual: $$actual bytes" >&2; \
347 echo " excess: $$((actual - limit)) bytes" >&2; \
348 exit 1; \
349 fi
350endef
351export size_check
352
Masahiro Yamada6825a952014-02-04 17:24:28 +0900353export KBUILD_MODULES KBUILD_BUILTIN
354export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
355
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900356# We need some generic definitions (do not try to remake the file).
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900357scripts/Kbuild.include: ;
358include scripts/Kbuild.include
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900359
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900360# Make variables (CC, etc...)
361
362AS = $(CROSS_COMPILE)as
363# Always use GNU ld
364ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
365LD = $(CROSS_COMPILE)ld.bfd
366else
367LD = $(CROSS_COMPILE)ld
368endif
369CC = $(CROSS_COMPILE)gcc
370CPP = $(CC) -E
371AR = $(CROSS_COMPILE)ar
372NM = $(CROSS_COMPILE)nm
373LDR = $(CROSS_COMPILE)ldr
374STRIP = $(CROSS_COMPILE)strip
375OBJCOPY = $(CROSS_COMPILE)objcopy
376OBJDUMP = $(CROSS_COMPILE)objdump
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200377LEX = flex
378YACC = bison
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900379AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900380PERL = perl
Stefano Babicb48bfc72017-04-05 17:46:41 +0200381PYTHON ?= python
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200382PYTHON2 = python2
383PYTHON3 = python3
Tom Rini36dd5f12017-09-23 13:00:57 -0400384DTC ?= $(objtree)/scripts/dtc/dtc
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900385CHECK = sparse
386
387CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
388 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
389
Masahiro Yamada3b612972014-08-31 15:16:53 +0900390KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900391
392KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
393 -Wno-format-security \
Tom Rinifa893992018-06-19 23:53:54 -0400394 -fno-builtin -ffreestanding $(CSTD_FLAG)
Bin Meng5bc11922018-09-16 22:35:28 -0700395KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900396KBUILD_AFLAGS := -D__ASSEMBLY__
397
Andy Shevchenko6ace36e2018-08-06 19:00:22 +0300398# Don't generate position independent code
399KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
400KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
401
Masahiro Yamada74241452014-02-24 11:12:09 +0900402# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
403UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
404UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900405
Masahiro Yamada74241452014-02-24 11:12:09 +0900406export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900407export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900408export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
409export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200410export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
Masahiro Yamada4b83f0d2017-02-27 15:24:45 +0900411export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900412
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900413export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900414export KBUILD_CFLAGS KBUILD_AFLAGS
415
Masahiro Yamada6825a952014-02-04 17:24:28 +0900416# When compiling out-of-tree modules, put MODVERDIR in the module
417# tree rather than in the kernel tree. The kernel tree might
418# even be read-only.
419export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
420
421# Files to ignore in find ... statements
422
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900423export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
424 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
425 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900426export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
427 --exclude CVS --exclude .pc --exclude .hg --exclude .git
428
429# ===========================================================================
430# Rules shared between *config targets and build targets
431
432# Basic helpers built in scripts/
433PHONY += scripts_basic
434scripts_basic:
435 $(Q)$(MAKE) $(build)=scripts/basic
436 $(Q)rm -f .tmp_quiet_recordmcount
437
438# To avoid any implicit rule to kick in, define an empty command.
439scripts/basic/%: scripts_basic ;
440
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900441PHONY += outputmakefile
442# outputmakefile generates a Makefile in the output directory, if using a
443# separate output directory. This allows convenient use of make in the
444# output directory.
445outputmakefile:
446ifneq ($(KBUILD_SRC),)
447 $(Q)ln -fsn $(srctree) source
448 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
449 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
450endif
451
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900452# To make sure we do not include .config for any of the *config targets
453# catch them early, and hand them over to scripts/kconfig/Makefile
454# It is allowed to specify more targets when calling make, including
455# mixing *config targets and build targets.
456# For example 'make oldconfig all'.
457# Detect when mixed targets is specified, and make a second invocation
458# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900459
Masahiro Yamada74241452014-02-24 11:12:09 +0900460version_h := include/generated/version_autogenerated.h
461timestamp_h := include/generated/timestamp_autogenerated.h
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +0100462defaultenv_h := include/generated/defaultenv_autogenerated.h
Masahiro Yamada74241452014-02-24 11:12:09 +0900463
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900464no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900465 help %docs check% coccicheck \
Simon Glass499fde52018-11-18 08:14:29 -0700466 ubootversion backup tests check qcheck
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900467
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900468config-targets := 0
469mixed-targets := 0
470dot-config := 1
471
472ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
473 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
474 dot-config := 0
475 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900476endif
477
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900478ifeq ($(KBUILD_EXTMOD),)
479 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
480 config-targets := 1
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900481 ifneq ($(words $(MAKECMDGOALS)),1)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900482 mixed-targets := 1
483 endif
484 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900485endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900486
487ifeq ($(mixed-targets),1)
488# ===========================================================================
489# We're called with mixed targets (*config and build targets).
490# Handle them one by one.
491
Masahiro Yamadae7734402014-08-05 15:56:44 +0900492PHONY += $(MAKECMDGOALS) __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900493
Masahiro Yamadae7734402014-08-05 15:56:44 +0900494$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900495 @:
496
Masahiro Yamadae7734402014-08-05 15:56:44 +0900497__build_one_by_one:
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900498 $(Q)set -e; \
499 for i in $(MAKECMDGOALS); do \
500 $(MAKE) -f $(srctree)/Makefile $$i; \
501 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900502
503else
504ifeq ($(config-targets),1)
505# ===========================================================================
506# *config targets only - make sure prerequisites are updated, and descend
507# in scripts/kconfig to make the *config target
508
Masahiro Yamada51148792014-07-30 14:08:17 +0900509KBUILD_DEFCONFIG := sandbox_defconfig
510export KBUILD_DEFCONFIG KBUILD_KCONFIG
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900511
Masahiro Yamada51148792014-07-30 14:08:17 +0900512config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900513 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada51148792014-07-30 14:08:17 +0900514
515%config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900516 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900517
518else
519# ===========================================================================
520# Build targets only - this includes vmlinux, arch specific targets, clean
521# targets and others. In general all targets except *config targets.
522
Masahiro Yamada61304db2017-01-30 11:12:07 +0900523# Additional helpers built in scripts/
524# Carefully list dependencies so we do not try to build scripts twice
525# in parallel
526PHONY += scripts
527scripts: scripts_basic include/config/auto.conf
528 $(Q)$(MAKE) $(build)=$(@)
529
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900530ifeq ($(dot-config),1)
531# Read in config
Masahiro Yamada51148792014-07-30 14:08:17 +0900532-include include/config/auto.conf
533
534# Read in dependencies to all Kconfig* files, make sure to run
535# oldconfig if changes are detected.
536-include include/config/auto.conf.cmd
537
538# To avoid any implicit rule to kick in, define an empty command
539$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
540
541# If .config is newer than include/config/auto.conf, someone tinkered
542# with it and forgot to run make oldconfig.
543# if auto.conf.cmd is missing then we are probably in a cleaned tree so
544# we execute the config step to be sure to catch updated Kconfig files
545include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200546 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900547 @# If the following part fails, include/config/auto.conf should be
548 @# deleted so "make silentoldconfig" will be re-run on the next build.
549 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
550 { rm -f include/config/auto.conf; false; }
551 @# include/config.h has been updated after "make silentoldconfig".
552 @# We need to touch include/config/auto.conf so it gets newer
553 @# than include/config.h.
554 @# Otherwise, 'make silentoldconfig' would be invoked twice.
555 $(Q)touch include/config/auto.conf
Masahiro Yamada51148792014-07-30 14:08:17 +0900556
Masahiro Yamada0b588de2019-01-10 23:11:39 +0900557u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
Philipp Tomsich0d982c52017-07-05 17:30:40 +0200558 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
559
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900560-include include/autoconf.mk
561-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900562
Masahiro Yamada51148792014-07-30 14:08:17 +0900563# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
564# is up-to-date. When we switch to a different board configuration, old CONFIG
565# macros are still remaining in include/config/auto.conf. Without the following
566# gimmick, wrong config.mk would be included leading nasty warnings/errors.
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900567ifneq ($(wildcard $(KCONFIG_CONFIG)),)
568ifneq ($(wildcard include/config/auto.conf),)
569autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
570 include/config/auto.conf)
571ifeq ($(autoconf_is_old),)
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900572include config.mk
573include arch/$(ARCH)/Makefile
Masahiro Yamadaced07152014-02-04 17:24:21 +0900574endif
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900575endif
576endif
Simon Glassfada9e22013-04-20 08:42:36 +0000577
Simon Glassbb1ae552016-11-07 08:47:07 -0700578# These are set by the arch-specific config.mk. Make sure they are exported
579# so they can be used when building an EFI application.
580export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
581export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
582export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
583export CFLAGS_EFI # Compiler flags to add when building EFI app
584export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
585export EFI_TARGET # binutils target if EFI is natively supported
586
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000587# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
588# that (or fail if absent). Otherwise, search for a linker script in a
589# standard location.
590
591ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900592 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000593 ifdef CONFIG_SYS_LDSCRIPT
594 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900595 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000596 endif
597endif
598
Simon Glassee601972011-11-21 10:49:37 +0000599# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000600ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000601 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900602 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000603 endif
604 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900605 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000606 endif
607 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900608 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000609 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000610endif
611
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900612else
Masahiro Yamada51148792014-07-30 14:08:17 +0900613# Dummy target needed, because used as prerequisite
614include/config/auto.conf: ;
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900615endif # $(dot-config)
616
Chris Zankelde5e5ce2016-08-10 18:36:43 +0300617#
618# Xtensa linker script cannot be preprocessed with -ansi because of
619# preprocessor operations on strings that don't make C identifiers.
620#
621ifeq ($(CONFIG_XTENSA),)
622LDPPFLAGS += -ansi
623endif
624
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900625ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
626KBUILD_CFLAGS += -Os
627else
628KBUILD_CFLAGS += -O2
629endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900630
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900631KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
Prabhakar Kushwaha687a7512015-07-02 12:00:17 +0530632KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900633
Masahiro Yamada1eb2e712018-04-16 13:18:31 +0900634# change __FILE__ to the relative path from the srctree
635KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
636
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900637KBUILD_CFLAGS += -g
638# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
639# option to the assembler.
640KBUILD_AFLAGS += -g
641
642# Report stack usage if supported
Alexey Brodkin948071b2018-04-02 12:18:02 +0300643# ARC tools based on GCC 7.1 has an issue with stack usage
644# with naked functions, see commit message for more details
645ifndef CONFIG_ARC
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900646ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
647 KBUILD_CFLAGS += -fstack-usage
648endif
Alexey Brodkin948071b2018-04-02 12:18:02 +0300649endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900650
651KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
Tom Rini4760fe22018-04-22 10:20:50 -0400652ifeq ($(cc-name),clang)
653KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
654KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
655KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
656KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
657KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
658endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900659
660# turn jbsr into jsr for m68k
661ifeq ($(ARCH),m68k)
662ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
663KBUILD_AFLAGS += -Wa,-gstabs,-S
664endif
665endif
666
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900667# Prohibit date/time macros, which would make the build non-deterministic
668KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
669
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900670include scripts/Makefile.extrawarn
Masahiro Yamada6419e142014-08-05 15:56:43 +0900671
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900672# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
673KBUILD_CPPFLAGS += $(KCPPFLAGS)
674KBUILD_AFLAGS += $(KAFLAGS)
675KBUILD_CFLAGS += $(KCFLAGS)
676
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900677# Use UBOOTINCLUDE when you must reference the include/ directory.
678# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900679UBOOTINCLUDE := \
680 -Iinclude \
681 $(if $(KBUILD_SRC), -I$(srctree)/include) \
Tom Rini3a649402017-03-18 09:01:44 -0400682 $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
683 $(if $(CONFIG_HAS_THUMB2),, \
684 -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
Masahiro Yamada51148792014-07-30 14:08:17 +0900685 -I$(srctree)/arch/$(ARCH)/include \
686 -include $(srctree)/include/linux/kconfig.h
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900687
688NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
689CHECKFLAGS += $(NOSTDINC_FLAGS)
690
691# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900692cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
693 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900694c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
695
wdenk7ebf7442002-11-02 23:17:16 +0000696#########################################################################
697# U-Boot objects....order is important (i.e. start must be first)
698
Masahiro Yamada9e414032014-02-04 17:24:24 +0900699HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200700
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900701libs-y += lib/
702libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900703libs-$(CONFIG_OF_EMBED) += dts/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900704libs-y += fs/
705libs-y += net/
706libs-y += disk/
707libs-y += drivers/
708libs-y += drivers/dma/
709libs-y += drivers/gpio/
710libs-y += drivers/i2c/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900711libs-y += drivers/mtd/
Miquel Raynala430fa02018-08-16 17:30:07 +0200712libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900713libs-y += drivers/mtd/onenand/
714libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
715libs-y += drivers/mtd/spi/
716libs-y += drivers/net/
717libs-y += drivers/net/phy/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900718libs-y += drivers/power/ \
Stephen Warren61f5ddc2016-07-13 13:45:31 -0600719 drivers/power/domain/ \
Masahiro Yamadae2906a52013-11-11 14:36:00 +0900720 drivers/power/fuel_gauge/ \
721 drivers/power/mfd/ \
722 drivers/power/pmic/ \
Przemyslaw Marczakaf41e8d2015-04-20 20:07:42 +0200723 drivers/power/battery/ \
724 drivers/power/regulator/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900725libs-y += drivers/spi/
726libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
727libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
Shengzhou Liub9e745b2016-08-26 18:30:39 +0800728libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
Ley Foon Tan5918afd2019-05-06 09:55:59 +0800729libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900730libs-y += drivers/serial/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530731libs-y += drivers/usb/dwc3/
Sriram Dash93eb8f32016-04-05 14:41:19 +0530732libs-y += drivers/usb/common/
Simon Glass019808f2015-03-25 12:22:37 -0600733libs-y += drivers/usb/emul/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900734libs-y += drivers/usb/eth/
Jean-Jacques Hiblotdb17a922019-01-10 15:44:14 +0100735libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
736libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900737libs-y += drivers/usb/host/
738libs-y += drivers/usb/musb/
739libs-y += drivers/usb/musb-new/
740libs-y += drivers/usb/phy/
741libs-y += drivers/usb/ulpi/
Simon Glass72a8cf82016-01-17 20:53:51 -0700742libs-y += cmd/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900743libs-y += common/
Simon Glass0649cd02017-08-03 12:21:49 -0600744libs-y += env/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900745libs-$(CONFIG_API) += api/
746libs-$(CONFIG_HAS_POST) += post/
Tom Rini79ffe8c2018-12-07 19:00:40 -0500747libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
Joe Hershberger421f86f2015-05-20 14:27:36 -0500748libs-$(CONFIG_UT_ENV) += test/env/
Maxime Ripardf2a99422016-07-05 10:26:46 +0200749libs-$(CONFIG_UT_OVERLAY) += test/overlay/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200750
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900751libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900752
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900753libs-y := $(sort $(libs-y))
754
755u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
756
757u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
758
759libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
760
761u-boot-init := $(head-y)
762u-boot-main := $(libs-y)
763
wdenka8c7c702003-12-06 19:49:23 +0000764
wdenk4f7cb082003-09-11 23:06:34 +0000765# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900766ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900767PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200768else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900769PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200770endif
771PLATFORM_LIBS += $(PLATFORM_LIBGCC)
Christian Gmeiner52ff8022018-04-09 17:11:45 +0200772
773ifdef CONFIG_CC_COVERAGE
774KBUILD_CFLAGS += --coverage
775PLATFORM_LIBGCC += -lgcov
776endif
777
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200778export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400779export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000780
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400781# Special flags for CPP when processing the linker script.
782# Pass the version down so we can handle backwards compatibility
783# on the fly.
784LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900785 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000786 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400787 $(shell $(LD) --version | \
788 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
789
wdenk7ebf7442002-11-02 23:17:16 +0000790#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000791#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000792
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400793ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200794BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400795else
796BOARD_SIZE_CHECK =
797endif
798
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +0200799ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
Simon Goldschmidt25770152019-05-24 22:07:04 +0200800SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +0200801else
802SPL_SIZE_CHECK =
803endif
804
Scott Wood8137af12013-12-14 11:47:32 +0800805# Statically apply RELA-style relocations (currently arm64 only)
Álvaro Fernández Rojasd57259b2017-04-20 20:36:25 +0200806# This is useful for arm64 where static relocation needs to be performed on
807# the raw binary, but certain simulators only accept an ELF file (but don't
808# do the relocation).
Scott Wood8137af12013-12-14 11:47:32 +0800809ifneq ($(CONFIG_STATIC_RELA),)
810# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
811DO_STATIC_RELA = \
812 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
813 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900814 tools/relocate-rela $(2) $(3) $$start $$end
Scott Wood8137af12013-12-14 11:47:32 +0800815else
816DO_STATIC_RELA =
817endif
818
Mike Frysinger3e883372009-06-15 00:25:19 -0400819# Always append ALL so that arch config.mk's can add custom ones
Masahiro Yamadae19b0fb2016-09-26 13:05:01 +0900820ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500821
Masahiro Yamada9e414032014-02-04 17:24:24 +0900822ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530823ifeq ($(CONFIG_SPL_FSL_PBL),y)
824ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
825else
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530826ifneq ($(CONFIG_SECURE_BOOT), y)
827# For Secure Boot The Image needs to be signed and Header must also
828# be included. So The image has to be built explicitly
Masahiro Yamada9e414032014-02-04 17:24:24 +0900829ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530830endif
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530831endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900832ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
Stefano Babicd714a752019-09-20 08:47:53 +0200833ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100834ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
835else
Stefano Babicd714a752019-09-20 08:47:53 +0200836ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200837ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
838else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900839ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100840endif
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200841endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900842ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Simon Glassad1ecd22016-01-31 18:10:50 -0700843ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
Masahiro Yamada2405d092014-05-15 20:37:51 +0900844ifeq ($(CONFIG_SPL_FRAMEWORK),y)
845ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
846endif
Simon Glass714a5622014-02-26 15:59:14 -0700847ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000848ifneq ($(CONFIG_SPL_TARGET),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900849ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000850endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900851ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
Simon Glass08aeb8b2015-08-04 12:33:43 -0600852ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
Simon Glass476476e2015-08-04 12:33:52 -0600853ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
wdenk7ebf7442002-11-02 23:17:16 +0000854
Heinrich Schuchardt871aa412017-10-16 18:08:38 +0000855ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
Simon Glasseea0f112015-01-27 22:13:32 -0700856ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
857endif
Simon Glassfce7b272014-11-12 22:42:08 -0700858
Tuomas Tynkkynen155b1162018-03-06 23:38:21 +0200859# Build a combined spl + u-boot image for sunxi
860ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
861ALL-y += u-boot-sunxi-with-spl.bin
862endif
863
Allen Martin12b7b702012-08-31 08:30:12 +0000864# enable combined SPL/u-boot/dtb rules for tegra
Simon Glass580cc032016-01-31 18:10:49 -0700865ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
Simon Glassa9d78262016-01-31 18:10:52 -0700866ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
Simon Glass580cc032016-01-31 18:10:49 -0700867ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530868endif
Allen Martin12b7b702012-08-31 08:30:12 +0000869
Ryder Lee3b975a12018-11-15 10:07:49 +0800870ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
871
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200872# Add optional build target if defined in board/cpu/soc headers
873ifneq ($(CONFIG_BUILD_TARGET),)
874ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
875endif
876
Masahiro Yamada382de4a2019-06-26 13:51:46 +0900877ifdef CONFIG_INIT_SP_RELATIVE
Stephen Warren5fed97a2018-01-09 12:52:14 -0700878ALL-y += init_sp_bss_offset_check
879endif
880
Jagdish Gediya96699f02018-09-03 21:35:10 +0530881ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
882ALL-y += u-boot-with-dtb.bin
883endif
884
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +0300885ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
886ALL-y += idbloader.img
887endif
888
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900889LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Joel Stanleye391b1e2017-04-09 20:33:58 +0200890
891# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
892LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
893
Alexey Brodkin10228072018-02-21 13:06:26 +0300894ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900895LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
896endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +0900897
Simon Glasse020c882015-07-31 09:31:23 -0600898# Normally we fill empty space with 0xff
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900899quiet_cmd_objcopy = OBJCOPY $@
Simon Glasse020c882015-07-31 09:31:23 -0600900cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
901 $(OBJCOPYFLAGS_$(@F)) $< $@
902
903# Provide a version which does not do this, for use by EFI
904quiet_cmd_zobjcopy = OBJCOPY $@
905cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900906
Simon Glass476476e2015-08-04 12:33:52 -0600907quiet_cmd_efipayload = OBJCOPY $@
908cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
909
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +0100910MKIMAGEOUTPUT ?= /dev/null
911
Marek Vasutb97241b2014-03-14 05:00:14 +0100912quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900913cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
Rasmus Villemoes06587612018-03-23 12:08:02 +0100914 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900915
Andre Przywara1a12fdc2017-04-26 01:32:45 +0100916quiet_cmd_mkfitimage = MKIMAGE $@
Marek Vasut7a778362019-03-06 22:04:00 +0100917cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
Rasmus Villemoes06587612018-03-23 12:08:02 +0100918 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Andre Przywara1a12fdc2017-04-26 01:32:45 +0100919
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900920quiet_cmd_cat = CAT $@
921cmd_cat = cat $(filter-out $(PHONY), $^) > $@
922
Masahiro Yamada982a1192014-02-24 11:12:17 +0900923append = cat $(filter-out $< $(PHONY), $^) >> $@
924
925quiet_cmd_pad_cat = CAT $@
926cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
927
Simon Glass1bd87632016-11-13 14:25:50 -0700928cfg: u-boot.cfg
929
Masahiro Yamada1bdd9422017-01-31 20:11:33 +0900930quiet_cmd_cfgcheck = CFGCHK $2
931cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
932 $(srctree)/scripts/config_whitelist.txt $(srctree)
933
Masahiro Yamada0b588de2019-01-10 23:11:39 +0900934all: $(ALL-y)
Jagan Teki63235bd2019-05-29 17:01:30 -0400935ifeq ($(CONFIG_DEPRECATED),y)
936 $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
Jagan Tekibb85afc2019-05-29 17:01:31 -0400937ifeq ($(CONFIG_SPI),y)
938ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
939 $(warning "The relevant config item with associated code will remove in v2019.07 release.")
940endif
941endif
Jagan Teki63235bd2019-05-29 17:01:30 -0400942endif
Heinrich Schuchardt282ed242019-09-16 18:41:42 +0200943ifneq ($(CONFIG_DM),y)
944 @echo >&2 "===================== WARNING ======================"
945 @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
946 @echo >&2 "compulsory starting with the v2020.01 release."
947 @echo >&2 "Failure to update may result in board removal."
948 @echo >&2 "See doc/driver-model/migration.rst for more info."
949 @echo >&2 "===================================================="
950endif
Tom Rini1cb5d5d2018-11-29 18:21:11 -0500951ifeq ($(CONFIG_MMC),y)
952ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
Chris Packhama2676992018-12-15 11:35:54 +1300953 @echo >&2 "===================== WARNING ======================"
954 @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
955 @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
956 @echo >&2 "Failure to update by the deadline may result in board removal."
957 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
958 @echo >&2 "===================================================="
Tom Rini1cb5d5d2018-11-29 18:21:11 -0500959endif
960endif
Tom Rini109d8bf2018-11-29 18:21:12 -0500961ifeq ($(CONFIG_USB),y)
962ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
Chris Packhama2676992018-12-15 11:35:54 +1300963 @echo >&2 "===================== WARNING ======================"
964 @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
965 @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
966 @echo >&2 "Failure to update by the deadline may result in board removal."
967 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
968 @echo >&2 "===================================================="
Tom Rini109d8bf2018-11-29 18:21:12 -0500969endif
970endif
Stefan Roese29a6fa72019-03-12 07:46:35 +0100971ifeq ($(CONFIG_MVSATA_IDE),y)
Chris Packhama2676992018-12-15 11:35:54 +1300972 @echo >&2 "===================== WARNING ======================"
Stefan Roese29a6fa72019-03-12 07:46:35 +0100973 @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
974 @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
975 @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
976 @echo >&2 "release."
977 @echo >&2 "Failure to update by the deadline may result in board removal."
978 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
979 @echo >&2 "===================================================="
980endif
981ifeq ($(CONFIG_LIBATA),y)
982ifneq ($(CONFIG_AHCI),y)
983 @echo >&2 "===================== WARNING ======================"
984 @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
985 @echo >&2 "enabled. Please update the storage controller driver to use"
986 @echo >&2 "CONFIG_AHCI before the v2019.07 release."
Chris Packhama2676992018-12-15 11:35:54 +1300987 @echo >&2 "Failure to update by the deadline may result in board removal."
988 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
989 @echo >&2 "===================================================="
Tom Riniea9d7c12018-11-29 18:21:13 -0500990endif
Tom Riniddfe3462019-01-07 22:57:56 -0500991endif
Simon Glass1ce689d2018-12-28 14:03:07 -0700992ifeq ($(CONFIG_PCI),y)
993ifneq ($(CONFIG_DM_PCI),y)
994 @echo >&2 "===================== WARNING ======================"
995 @echo >&2 "This board does not use CONFIG_DM_PCI Please update"
996 @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
997 @echo >&2 "Failure to update by the deadline may result in board removal."
998 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
999 @echo >&2 "===================================================="
1000endif
1001endif
Simon Glass3e87ffc2018-12-28 14:03:08 -07001002ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
1003ifneq ($(CONFIG_DM_VIDEO),y)
1004 @echo >&2 "===================== WARNING ======================"
1005 @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
1006 @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
1007 @echo >&2 "Failure to update by the deadline may result in board removal."
1008 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
1009 @echo >&2 "===================================================="
1010endif
1011endif
Simon Glass841d5fb2018-12-05 06:57:08 -07001012ifeq ($(CONFIG_OF_EMBED),y)
Chris Packhama2676992018-12-15 11:35:54 +13001013 @echo >&2 "===================== WARNING ======================"
1014 @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
1015 @echo >&2 "be used for debugging purposes. Please use"
1016 @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
1017 @echo >&2 "See doc/README.fdt-control for more info."
1018 @echo >&2 "===================================================="
Simon Glass841d5fb2018-12-05 06:57:08 -07001019endif
Jagan Teki68979522018-12-24 03:22:25 +05301020ifeq ($(CONFIG_SPI_FLASH),y)
1021ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
1022 @echo >&2 "===================== WARNING ======================"
1023 @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
1024 @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
1025 @echo >&2 "Failure to update by the deadline may result in board removal."
1026 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
1027 @echo >&2 "===================================================="
1028endif
1029endif
Stefan Roese80af0fe2019-05-09 10:16:20 +02001030ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
1031ifneq ($(CONFIG_WDT),y)
1032 @echo >&2 "===================== WARNING ======================"
1033 @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
1034 @echo >&2 "Please update the board to use CONFIG_WDT before the"
1035 @echo >&2 "v2019.10 release."
1036 @echo >&2 "Failure to update by the deadline may result in board removal."
1037 @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
1038 @echo >&2 "===================================================="
1039endif
1040endif
Heinrich Schuchardt2e0f3242019-08-10 00:10:37 +02001041ifneq ($(CONFIG_NET),)
1042ifneq ($(CONFIG_DM_ETH),y)
1043 @echo >&2 "===================== WARNING ======================"
1044 @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
1045 @echo >&2 "for Ethernet drivers). Please update the board to use"
1046 @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
1047 @echo >&2 "update by the deadline may result in board removal."
1048 @echo >&2 "See doc/driver-model/migration.rst for more info."
1049 @echo >&2 "===================================================="
1050endif
1051endif
Masahiro Yamada4bf06d12016-09-26 13:04:59 +09001052 @# Check that this build does not use CONFIG options that we do not
1053 @# know about unless they are in Kconfig. All the existing CONFIG
1054 @# options are whitelisted, so new ones should not be added.
Masahiro Yamada1bdd9422017-01-31 20:11:33 +09001055 $(call cmd,cfgcheck,u-boot.cfg)
wdenk7ebf7442002-11-02 23:17:16 +00001056
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001057PHONY += dtbs
Masahiro Yamada4141e852016-06-23 13:53:46 +09001058dtbs: dts/dt.dtb
1059 @:
Tom Rini36dd5f12017-09-23 13:00:57 -04001060dts/dt.dtb: u-boot
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001061 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +00001062
Simon Glassad1ecd22016-01-31 18:10:50 -07001063quiet_cmd_copy = COPY $@
1064 cmd_copy = cp $< $@
1065
Jean-Jacques Hiblot11955592017-09-15 12:57:24 +02001066ifeq ($(CONFIG_MULTI_DTB_FIT),y)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001067
Marek Vasut95f4bbd2019-03-08 16:06:55 +01001068ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
1069FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
1070else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
1071FINAL_DTB_CONTAINER = fit-dtb.blob.gz
1072else
1073FINAL_DTB_CONTAINER = fit-dtb.blob
1074endif
1075
1076fit-dtb.blob.gz: fit-dtb.blob
1077 @gzip -kf9 $< > $@
1078
1079fit-dtb.blob.lzo: fit-dtb.blob
1080 @lzop -f9 $< > $@
1081
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001082fit-dtb.blob: dts/dt.dtb FORCE
1083 $(call if_changed,mkimage)
Vagrant Cascadian878e2a52019-05-02 11:14:12 -07001084ifneq ($(SOURCE_DATE_EPOCH),)
1085 touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
1086 chmod 0600 fit-dtb.blob
1087endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001088
1089MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1090 -a 0 -e 0 -E \
1091 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
1092
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301093ifneq ($(EXT_DTB),)
1094u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
1095 $(call if_changed,cat)
1096else
Tom Rini748198c2019-05-19 18:09:05 -04001097u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001098 $(call if_changed,cat)
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301099endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001100
1101u-boot.bin: u-boot-fit-dtb.bin FORCE
1102 $(call if_changed,copy)
Heiko Schocher16c776d2019-05-28 13:44:31 +02001103
1104u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
1105 $(call if_changed,cat)
1106
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001107else ifeq ($(CONFIG_OF_SEPARATE),y)
Simon Glassad1ecd22016-01-31 18:10:50 -07001108u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001109 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +00001110
Simon Glassad1ecd22016-01-31 18:10:50 -07001111u-boot.bin: u-boot-dtb.bin FORCE
1112 $(call if_changed,copy)
1113else
1114u-boot.bin: u-boot-nodtb.bin FORCE
1115 $(call if_changed,copy)
1116endif
1117
Stefano Babice64348f2014-03-31 09:50:35 +02001118%.imx: %.bin
Stefano Babic552a8482017-06-29 10:16:06 +02001119 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Heinrich Schuchardt219dee72019-04-02 19:19:05 +02001120 $(BOARD_SIZE_CHECK)
Stefano Babice64348f2014-03-31 09:50:35 +02001121
Albert ARIBAUD \(3ADEV\)ed0c2c02016-09-26 09:08:06 +02001122%.vyb: %.imx
1123 $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
1124
1125quiet_cmd_copy = COPY $@
1126 cmd_copy = cp $< $@
1127
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +09001128u-boot.dtb: dts/dt.dtb
1129 $(call cmd,copy)
1130
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001131OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +00001132
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001133OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +00001134
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001135u-boot.hex u-boot.srec: u-boot FORCE
1136 $(call if_changed,objcopy)
1137
Masaru Nagai341ca902015-08-28 12:12:45 +09001138OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
1139
1140u-boot-elf.srec: u-boot.elf FORCE
1141 $(call if_changed,objcopy)
1142
Marek Vasut3ee58ea2018-02-26 20:14:02 +01001143OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
1144
1145spl/u-boot-spl.srec: spl/u-boot-spl FORCE
1146 $(call if_changed,objcopy)
1147
Marek Vasut56023302018-10-03 12:44:13 +02001148%.scif: %.srec
1149 $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
1150
Simon Glassad1ecd22016-01-31 18:10:50 -07001151OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
Jagdish Gediya96699f02018-09-03 21:35:10 +05301152 $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
1153 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001154
Dalon Westergreen2ff60af2018-09-10 10:28:47 -07001155OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
1156
1157spl/u-boot-spl.hex: spl/u-boot-spl FORCE
1158 $(call if_changed,objcopy)
1159
Simon Glassad1ecd22016-01-31 18:10:50 -07001160binary_size_check: u-boot-nodtb.bin FORCE
1161 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001162 map_size=$(shell cat u-boot.map | \
Simon Glass0b308f12014-06-18 00:10:15 -06001163 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001164 | sed 's/0X//g' \
Simon Glass0b308f12014-06-18 00:10:15 -06001165 | bc); \
Simon Glass89742922014-06-02 22:04:47 -06001166 if [ "" != "$$map_size" ]; then \
1167 if test $$map_size -ne $$file_size; then \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001168 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
Simon Glassad1ecd22016-01-31 18:10:50 -07001169 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
Simon Glass89742922014-06-02 22:04:47 -06001170 exit 1; \
1171 fi \
1172 fi
1173
Masahiro Yamada382de4a2019-06-26 13:51:46 +09001174ifdef CONFIG_INIT_SP_RELATIVE
Stephen Warren5fed97a2018-01-09 12:52:14 -07001175ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
1176subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
1177else
1178subtract_sys_malloc_f_len = true
1179endif
1180# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
1181# so low that the DTB could probably use 90%+ of the available space, for
1182# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
1183# safe for now and tweak this later if space becomes tight.
1184# A rejected alternative would be to check that some absolute minimum stack
1185# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
1186# deliberately build-specific, to take account of build-to-build stack usage
1187# differences due to different feature sets, there is no common absolute value
1188# to check against.
1189init_sp_bss_offset_check: u-boot.dtb FORCE
1190 @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
1191 space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
1192 $(subtract_sys_malloc_f_len) ; \
1193 quarter_space=$$(($${space} / 4)) ; \
1194 if [ $${dtb_size} -gt $${quarter_space} ]; then \
1195 echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
1196 echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
1197 exit 1 ; \
1198 fi
1199endif
1200
Simon Glassad1ecd22016-01-31 18:10:50 -07001201u-boot-nodtb.bin: u-boot FORCE
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001202 $(call if_changed,objcopy)
1203 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
1204 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +00001205
Masahiro Yamada9e414032014-02-04 17:24:24 +09001206u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -04001207 $(CREATE_LDR_ENV)
Sonic Zhang240182d2014-08-12 18:45:26 +08001208 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -04001209 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001210
Simon Glass17a944b2016-11-25 20:15:57 -07001211# binman
1212# ---------------------------------------------------------------------------
Simon Glassa3c00552018-11-06 15:21:31 -07001213# Use 'make BINMAN_DEBUG=1' to enable debugging
Simon Glass17a944b2016-11-25 20:15:57 -07001214quiet_cmd_binman = BINMAN $@
Stephen Warren4f4fb852019-07-19 11:21:17 -06001215cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
1216 build -u -d u-boot.dtb -O . -m \
Simon Glassa3c00552018-11-06 15:21:31 -07001217 -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
Stephen Warren4f4fb852019-07-19 11:21:17 -06001218 $(BINMAN_$(@F))
Simon Glass17a944b2016-11-25 20:15:57 -07001219
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001220OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -05001221
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001222OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
1223
1224u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
1225 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001226
Stefan Roeseb40bda62012-08-16 17:54:52 +02001227#
1228# U-Boot entry point, needed for booting of full-blown U-Boot
1229# from the SPL U-Boot version.
1230#
1231ifndef CONFIG_SYS_UBOOT_START
1232CONFIG_SYS_UBOOT_START := 0
1233endif
1234
Michal Simekfc8db752019-10-02 15:53:12 +02001235# Boards with more complex image requirements can provide an .its source file
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001236# or a generator script
1237ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
1238U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
1239else
1240ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
1241U_BOOT_ITS := u-boot.its
Chris Spencere3bc7c62018-12-20 09:25:24 +00001242ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
1243U_BOOT_ITS_DEPS += u-boot-nodtb.bin
1244endif
Andreas Färberc29c1e62018-06-03 07:23:58 +02001245ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
1246U_BOOT_ITS_DEPS += u-boot
1247endif
1248$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001249 $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
1250 $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
1251endif
1252endif
1253
Simon Glasscdf17242016-02-22 22:55:57 -07001254ifdef CONFIG_SPL_LOAD_FIT
1255MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1256 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1257 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
Andreas Bießmann7a439ca2016-05-01 03:01:27 +02001258 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
Simon Glasscdf17242016-02-22 22:55:57 -07001259else
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001260MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
1261 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1262 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001263MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
1264 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1265 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +01001266u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
1267CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
Simon Glasscdf17242016-02-22 22:55:57 -07001268endif
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001269
Simon Glassdae6e7b2016-01-31 18:10:54 -07001270MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
1271
Masahiro Yamada4ab3fc52014-03-11 11:05:17 +09001272MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
1273 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001274
Stefan Roesea90ffb52015-01-19 11:33:45 +01001275MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
Mario Sixa1b6b0a2017-01-11 16:01:00 +01001276 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1277 $(if $(KEYDIR),-k $(KEYDIR))
Stefan Roesea90ffb52015-01-19 11:33:45 +01001278
Masahiro Yamadae4536f82014-03-11 11:05:16 +09001279MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1280 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001281
Hou Zhiqiangbcda5b02019-08-20 09:35:23 +00001282ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1283UBOOT_BIN := u-boot-with-dtb.bin
1284else
1285UBOOT_BIN := u-boot.bin
1286endif
1287
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001288u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
Lukas Auer2c768612019-08-21 21:14:41 +02001289 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
1290 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
Tom Rinie4b8dd92019-08-27 07:11:37 -04001291 ,$(UBOOT_BIN)) FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001292 $(call if_changed,mkimage)
Simon Goldschmidt45297e22019-01-11 20:56:02 +01001293 $(BOARD_SIZE_CHECK)
wdenkbdccc4f2003-08-05 17:43:17 +00001294
Marek Vasut7a778362019-03-06 22:04:00 +01001295ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
1296MKIMAGEFLAGS_u-boot.itb =
1297else
1298MKIMAGEFLAGS_u-boot.itb = -E
1299endif
1300
Lukas Auer2c768612019-08-21 21:14:41 +02001301u-boot.itb: u-boot-nodtb.bin \
1302 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
1303 $(U_BOOT_ITS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001304 $(call if_changed,mkfitimage)
Maxime Riparde89f5591f2018-01-16 09:44:23 +01001305 $(BOARD_SIZE_CHECK)
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001306
Simon Glass73c5c392016-01-31 18:10:55 -07001307u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
Stefan Roesea90ffb52015-01-19 11:33:45 +01001308 $(call if_changed,mkimage)
1309
Masahiro Yamada9e414032014-02-04 17:24:24 +09001310u-boot.sha1: u-boot.bin
1311 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +02001312
Masahiro Yamada9e414032014-02-04 17:24:24 +09001313u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +00001314 $(OBJDUMP) -d $< > $@
1315
York Sun7550dbe2018-06-14 14:38:48 -07001316ifneq ($(CONFIG_SPL_PAYLOAD),)
1317SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001318else
Masahiro Yamada9e414032014-02-04 17:24:24 +09001319SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +08001320endif
Scott Wood74752ba2012-12-06 13:33:16 +00001321
Stefan Roese9ea6f712019-04-03 15:24:50 +02001322SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
1323
Masahiro Yamada982a1192014-02-24 11:12:17 +09001324OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
1325 --pad-to=$(CONFIG_SPL_PAD_TO)
Stefan Roese9ea6f712019-04-03 15:24:50 +02001326u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
Masahiro Yamada982a1192014-02-24 11:12:17 +09001327 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001328
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001329ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
1330MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd
1331tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
1332 $(call if_changed,mkimage)
1333idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
1334 $(call if_changed,cat)
1335endif
1336
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001337ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001338MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
1339
1340lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
1341 $(call if_changed,mkimage)
1342
1343OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1344
Masahiro Yamada514ec432016-02-05 17:55:13 +09001345lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001346 $(call if_changed,objcopy)
1347
1348OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1349
Masahiro Yamada514ec432016-02-05 17:55:13 +09001350lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001351 $(call if_changed,objcopy)
1352
Masahiro Yamada514ec432016-02-05 17:55:13 +09001353lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001354 $(call if_changed,cat)
1355
1356CLEAN_FILES += lpc32xx-*
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001357endif
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001358
Masahiro Yamada982a1192014-02-24 11:12:17 +09001359OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
1360 --pad-to=$(CONFIG_TPL_PAD_TO)
1361tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
1362 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +00001363
Masahiro Yamada630d2342014-02-24 11:12:21 +09001364SPL: spl/u-boot-spl.bin FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001365 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Masahiro Yamada630d2342014-02-24 11:12:21 +09001366
Peng Fancaceb732018-12-21 06:21:31 +00001367ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
Peng Fan700315c2019-08-22 07:42:41 +00001368ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
1369u-boot.cnt: u-boot.bin FORCE
1370 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1371
1372flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
1373 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1374else
Peng Fan94df9882018-11-20 10:19:46 +00001375flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
1376 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1377endif
Peng Fan700315c2019-08-22 07:42:41 +00001378endif
Peng Fan94df9882018-11-20 10:19:46 +00001379
Masahiro Yamada630d2342014-02-24 11:12:21 +09001380u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001381 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +00001382
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001383MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
1384
1385u-boot.ubl: u-boot-with-spl.bin FORCE
1386 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +00001387
Masahiro Yamada982a1192014-02-24 11:12:17 +09001388MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
1389 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
1390 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1391spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1392 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +00001393
Christian Riesch532d5312014-05-07 10:16:28 +02001394OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +09001395u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1396 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +00001397
Marek Vasut1a9df132014-04-03 19:12:21 +02001398u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1399 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +09001400u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +09001401 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +00001402
Stefan Roese94aebe62012-01-05 11:19:50 +01001403# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
1404# Both images are created using mkimage (crc etc), so that the ROM
1405# bootloader can check its integrity. Padding needs to be done to the
1406# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
1407# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
1408# The resulting image containing both U-Boot images is called u-boot.spr
Masahiro Yamada982a1192014-02-24 11:12:17 +09001409MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1410 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1411spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1412 $(call if_changed,mkimage)
1413
1414OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1415 --gap-fill=0xff
1416u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1417 $(call if_changed,pad_cat)
Stefan Roese94aebe62012-01-05 11:19:50 +01001418
Marek Vasut333b7202015-07-15 02:53:45 +02001419ifneq ($(CONFIG_ARCH_SOCFPGA),)
1420quiet_cmd_socboot = SOCBOOT $@
Simon Glassbd7dc382016-01-31 18:10:53 -07001421cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1422 spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1423 u-boot.img > $@ || rm -f $@
1424u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
Marek Vasut333b7202015-07-15 02:53:45 +02001425 $(call if_changed,socboot)
1426endif
1427
Jagdish Gediya96699f02018-09-03 21:35:10 +05301428ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1429u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
1430 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
1431 $(call if_changed,binman)
1432
1433ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
1434OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
1435u-boot-br.bin: u-boot FORCE
1436 $(call if_changed,objcopy)
1437endif
1438endif
1439
Simon Glassfce7b272014-11-12 22:42:08 -07001440# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1441# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
Simon Glassb215fbd2016-11-25 20:16:02 -07001442# the middle. This is handled by binman based on an image description in the
1443# board's device tree.
Simon Glassfce7b272014-11-12 22:42:08 -07001444ifneq ($(CONFIG_X86_RESET_VECTOR),)
1445rom: u-boot.rom FORCE
1446
Simon Glass0adf8d32016-03-11 22:07:16 -07001447refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
1448 $(call if_changed,copy)
1449
1450quiet_cmd_ldr = LD $@
1451cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1452 $(filter-out FORCE,$^) -o $@
1453
Simon Glass972188b2017-01-16 07:03:45 -07001454u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
1455 $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
Simon Glassd68574a2019-04-25 21:58:53 -06001456 $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
Masahiro Yamadad6a0c782017-10-17 13:42:44 +09001457 $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
Simon Glassb215fbd2016-11-25 20:16:02 -07001458 $(call if_changed,binman)
Simon Glassfce7b272014-11-12 22:42:08 -07001459
1460OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1461u-boot-x86-16bit.bin: u-boot FORCE
1462 $(call if_changed,objcopy)
1463endif
1464
Jagan Tekiaec9a0f2016-10-13 14:19:35 +05301465ifneq ($(CONFIG_ARCH_SUNXI),)
Tuomas Tynkkynenb0b0d222018-03-06 23:38:22 +02001466ifeq ($(CONFIG_ARM64),)
Masahiro Yamadad6a0c782017-10-17 13:42:44 +09001467u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
Simon Glass61b994a2016-11-25 20:16:01 -07001468 $(call if_changed,binman)
Tuomas Tynkkynenb0b0d222018-03-06 23:38:22 +02001469else
1470u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
1471 $(call if_changed,cat)
1472endif
Ian Campbell50827a52014-05-05 11:52:30 +01001473endif
1474
Tom Warren6d6c0ba2012-12-11 13:34:17 +00001475ifneq ($(CONFIG_TEGRA),)
Simon Glassf2faffe2017-11-13 18:55:06 -07001476ifneq ($(CONFIG_BINMAN),)
Simon Glass2547e912018-07-20 19:49:27 -06001477# Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
1478%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
1479 spl/%-spl %.bin FORCE
Simon Glassf2faffe2017-11-13 18:55:06 -07001480 $(call if_changed,binman)
1481else
Masahiro Yamada982a1192014-02-24 11:12:17 +09001482OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
Simon Glassad1ecd22016-01-31 18:10:50 -07001483u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
Masahiro Yamada982a1192014-02-24 11:12:17 +09001484 $(call if_changed,pad_cat)
Stephen Warren9972db52013-05-14 08:00:53 +00001485
Simon Glassa9d78262016-01-31 18:10:52 -07001486OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
Simon Glass73c5c392016-01-31 18:10:55 -07001487u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
Simon Glass580cc032016-01-31 18:10:49 -07001488 $(call if_changed,pad_cat)
Simon Glassa9d78262016-01-31 18:10:52 -07001489
1490u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
1491 $(call if_changed,copy)
Simon Glassf2faffe2017-11-13 18:55:06 -07001492endif # binman
Allen Martin984df4e2012-08-31 08:30:10 +00001493endif
1494
Simon Glass08aeb8b2015-08-04 12:33:43 -06001495OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1496u-boot-app.efi: u-boot FORCE
1497 $(call if_changed,zobjcopy)
1498
Simon Glass73c5c392016-01-31 18:10:55 -07001499u-boot.bin.o: u-boot.bin FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001500 $(call if_changed,efipayload)
1501
1502u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1503 $(call if_changed_dep,cpp_lds)
1504
1505# Rule to link the EFI payload which contains a stub and a U-Boot binary
1506quiet_cmd_u-boot_payload ?= LD $@
1507 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
Simon Glass96a8d402015-08-04 12:33:56 -06001508 -T u-boot-payload.lds arch/x86/cpu/call32.o \
Simon Glass73c5c392016-01-31 18:10:55 -07001509 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
Simon Glass2dcd4e92016-11-07 08:47:14 -07001510 $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
Simon Glass476476e2015-08-04 12:33:52 -06001511
Simon Glass73c5c392016-01-31 18:10:55 -07001512u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001513 $(call if_changed,u-boot_payload)
1514
1515OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1516u-boot-payload.efi: u-boot-payload FORCE
1517 $(call if_changed,zobjcopy)
1518
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001519u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1520 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +02001521
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301522#Add a target to create boot binary having SPL binary in PBI format
1523#concatenated with u-boot binary. It is need by PowerPC SoC having
1524#internal SRAM <= 512KB.
1525MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Alison Wang94cb17d2014-12-03 15:00:41 +08001526 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1527 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301528
1529spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1530 $(call if_changed,mkimage)
1531
Alison Wang45c2e482014-12-03 15:00:42 +08001532ifeq ($(ARCH),arm)
1533UBOOT_BINLOAD := u-boot.img
1534else
Jagdish Gediya96699f02018-09-03 21:35:10 +05301535ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1536UBOOT_BINLOAD := u-boot-with-dtb.bin
1537else
Alison Wang45c2e482014-12-03 15:00:42 +08001538UBOOT_BINLOAD := u-boot.bin
1539endif
Jagdish Gediya96699f02018-09-03 21:35:10 +05301540endif
Alison Wang45c2e482014-12-03 15:00:42 +08001541
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301542OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1543 --gap-fill=0xff
1544
Alison Wang45c2e482014-12-03 15:00:42 +08001545u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301546 $(call if_changed,pad_cat)
1547
Stefan Roeseecddccd2013-02-22 11:36:50 +01001548# PPC4xx needs the SPL at the end of the image, since the reset vector
1549# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1550# and need to introduce a new build target with the full blown U-Boot
1551# at the start padded up to the start of the SPL image. And then concat
1552# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +09001553
1554OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1555 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1556u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1557 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +01001558
Álvaro Fernández Rojasd57259b2017-04-20 20:36:25 +02001559# Create a new ELF from a raw binary file.
Álvaro Fernández Rojas96ee1ad2017-04-20 20:36:26 +02001560ifndef PLATFORM_ELFENTRY
1561 PLATFORM_ELFENTRY = "_start"
1562endif
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001563quiet_cmd_u-boot-elf ?= LD $@
1564 cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
1565 --defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
1566 -Ttext=$(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9e414032014-02-04 17:24:24 +09001567u-boot.elf: u-boot.bin
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001568 $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
1569 $(call if_changed,u-boot-elf)
Scott Woodf4dc7142013-12-14 11:47:33 +08001570
Ryder Lee3b975a12018-11-15 10:07:49 +08001571# MediaTek's ARM-based u-boot needs a header to contains its load address
1572# which is parsed by the BootROM.
1573# If the SPL build is enabled, the header will be added to the spl binary,
1574# and the spl binary and the u-boot.img will be combined into one file.
1575# Otherwise the header will be added to the u-boot.bin directly.
1576
1577ifeq ($(CONFIG_SPL),y)
1578spl/u-boot-spl-mtk.bin: spl/u-boot-spl
1579
1580u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
1581 $(call if_changed,binman)
1582else
1583MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
1584 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1585 -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
1586
1587u-boot-mtk.bin: u-boot.bin FORCE
1588 $(call if_changed,mkimage)
1589endif
1590
Paul Burton09bebb82017-06-15 17:05:09 -07001591ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
1592
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001593# Rule to link u-boot
1594# May be overridden by arch/$(ARCH)/config.mk
1595quiet_cmd_u-boot__ ?= LD $@
1596 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1597 -T u-boot.lds $(u-boot-init) \
1598 --start-group $(u-boot-main) --end-group \
Paul Burton09bebb82017-06-15 17:05:09 -07001599 $(PLATFORM_LIBS) -Map u-boot.map; \
1600 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
Simon Glass86eb49b2011-10-03 19:26:50 +00001601
Vasili Galkacac8f382014-08-14 12:40:55 +03001602quiet_cmd_smap = GEN common/system_map.o
1603cmd_smap = \
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001604 smap=`$(call SYSTEM_MAP,u-boot) | \
1605 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1606 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1607 -c $(srctree)/common/system_map.c -o common/system_map.o
Vasili Galkacac8f382014-08-14 12:40:55 +03001608
Masahiro Yamada514ec432016-02-05 17:55:13 +09001609u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
Paul Burton09bebb82017-06-15 17:05:09 -07001610 +$(call if_changed,u-boot__)
Vasili Galkacac8f382014-08-14 12:40:55 +03001611ifeq ($(CONFIG_KALLSYMS),y)
1612 $(call cmd,smap)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001613 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001614endif
wdenk7ebf7442002-11-02 23:17:16 +00001615
Rick Chen42ac26f2017-12-26 13:55:56 +08001616ifeq ($(CONFIG_RISCV),y)
1617 @tools/prelink-riscv $@ 0
1618endif
1619
Stephen Warren7ed48482016-02-08 14:44:15 -07001620quiet_cmd_sym ?= SYM $@
1621 cmd_sym ?= $(OBJDUMP) -t $< > $@
1622u-boot.sym: u-boot FORCE
1623 $(call if_changed,sym)
1624
Michal Simek69c0d322014-04-24 15:24:28 +02001625# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001626# make sure no implicit rule kicks in
1627$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +02001628
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001629# Handle descending into subdirectories listed in $(vmlinux-dirs)
1630# Preset locale variables to speed up the build process. Limit locale
1631# tweaks to this spot to avoid wrong language settings when running
1632# make menuconfig etc.
1633# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001634
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001635PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001636$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001637 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001638
Masahiro Yamada74241452014-02-24 11:12:09 +09001639tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001640# The "tools" are needed early
1641$(filter-out tools, $(u-boot-dirs)): tools
1642# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1643# is "yes"), so compile examples after U-Boot is compiled.
1644examples: $(filter-out examples, $(u-boot-dirs))
1645
Masahiro Yamada74241452014-02-24 11:12:09 +09001646define filechk_uboot.release
1647 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1648endef
1649
1650# Store (new) UBOOTRELEASE string in include/config/uboot.release
Masahiro Yamada51148792014-07-30 14:08:17 +09001651include/config/uboot.release: include/config/auto.conf FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001652 $(call filechk,uboot.release)
1653
1654
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001655# Things we need to do before we recursively start building the kernel
1656# or the modules are listed in "prepare".
1657# A multi level approach is used. prepareN is processed before prepareN-1.
1658# archprepare is used in arch Makefiles and when processed asm symlink,
1659# version.h and scripts_basic is processed / created.
1660
1661# Listed in dependency order
1662PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1663
1664# prepare3 is used to check if we are building in a separate output directory,
1665# and if so do:
1666# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001667prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001668ifneq ($(KBUILD_SRC),)
Masahiro Yamada51148792014-07-30 14:08:17 +09001669 @$(kecho) ' Using $(srctree) as source for U-Boot'
1670 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001671 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1672 echo >&2 " in the '$(srctree)' directory.";\
1673 /bin/false; \
1674 fi;
1675endif
1676
1677# prepare2 creates a makefile if using a separate output directory
Masahiro Yamada0b588de2019-01-10 23:11:39 +09001678prepare2: prepare3 outputmakefile cfg
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001679
Masahiro Yamada51148792014-07-30 14:08:17 +09001680prepare1: prepare2 $(version_h) $(timestamp_h) \
1681 include/config/auto.conf
Masahiro Yamada4a377552014-02-25 19:26:48 +09001682ifeq ($(wildcard $(LDSCRIPT)),)
1683 @echo >&2 " Could not find linker script."
1684 @/bin/false
1685endif
wdenk7ebf7442002-11-02 23:17:16 +00001686
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001687ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
1688prepare1: $(defaultenv_h)
1689endif
1690
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001691archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001692
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001693prepare0: archprepare FORCE
1694 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001695
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001696# All the preparing..
1697prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001698
Masahiro Yamada74241452014-02-24 11:12:09 +09001699# Generate some files
1700# ---------------------------------------------------------------------------
1701
1702define filechk_version.h
1703 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1704 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
Vagrant Cascadian42ffa512016-06-12 06:07:07 -07001705 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1706 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
Masahiro Yamada74241452014-02-24 11:12:09 +09001707endef
1708
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001709# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1710# The BSD date on the other hand behaves different and would produce errors
1711# with the misused '-d' switch. Respect that and search a working date with
1712# well known pre- and suffixes for the GNU variant of date.
Masahiro Yamada74241452014-02-24 11:12:09 +09001713define filechk_timestamp.h
Chris Packham70d39f52015-08-13 18:08:27 +12001714 (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1715 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001716 DATE=""; \
1717 for date in gdate date.gnu date; do \
1718 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1719 done; \
1720 if test -n "$${DATE}"; then \
1721 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1722 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1723 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
Bin Menga34b4672015-10-12 05:23:40 -07001724 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
Andy Shevchenkoe7aa9c22017-07-21 22:32:01 +03001725 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001726 else \
1727 return 42; \
1728 fi; \
Chris Packham70d39f52015-08-13 18:08:27 +12001729 else \
1730 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1731 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1732 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
Bin Menga34b4672015-10-12 05:23:40 -07001733 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
Andy Shevchenkoe7aa9c22017-07-21 22:32:01 +03001734 LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
Chris Packham70d39f52015-08-13 18:08:27 +12001735 fi)
Masahiro Yamada74241452014-02-24 11:12:09 +09001736endef
1737
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001738define filechk_defaultenv.h
1739 (grep -v '^#' | \
1740 grep -v '^$$' | \
1741 tr '\n' '\0' | \
Rasmus Villemoes47e8ee62019-08-28 11:00:46 +00001742 sed -e 's/\\\x0/\n/g' | \
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001743 xxd -i ; echo ", 0x00" ; )
1744endef
1745
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09001746$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001747 $(call filechk,version.h)
1748
1749$(timestamp_h): $(srctree)/Makefile FORCE
1750 $(call filechk,timestamp.h)
1751
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001752$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
1753 $(call filechk,defaultenv.h)
1754
Masahiro Yamada63780082014-02-24 11:12:10 +09001755# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001756quiet_cmd_cpp_lds = LDS $@
Chris Zankelde5e5ce2016-08-10 18:36:43 +03001757cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
Simon Glass44093a12018-10-01 12:22:43 -06001758 -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09001759
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001760u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001761 $(call if_changed_dep,cpp_lds)
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02001762
Masahiro Yamada982a1192014-02-24 11:12:17 +09001763spl/u-boot-spl.bin: spl/u-boot-spl
1764 @:
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +02001765 $(SPL_SIZE_CHECK)
1766
Simon Glass054b3a12016-07-04 11:57:57 -06001767spl/u-boot-spl: tools prepare \
M. Vefa Bicakcidd2081a2017-11-11 22:48:40 -05001768 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
1769 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
Masahiro Yamadac7163082014-06-09 15:14:11 +09001770 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00001771
Ian Campbell50827a52014-05-05 11:52:30 +01001772spl/sunxi-spl.bin: spl/u-boot-spl
1773 @:
1774
Maxime Ripardd2fdcc72017-02-27 18:22:13 +01001775spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
1776 @:
1777
Simon Glassbd7dc382016-01-31 18:10:53 -07001778spl/u-boot-spl.sfp: spl/u-boot-spl
Marek Vasut333b7202015-07-15 02:53:45 +02001779 @:
1780
Nathan Rossi08598d62015-11-17 22:56:57 +10001781spl/boot.bin: spl/u-boot-spl
1782 @:
1783
Simon Glass3c00a2c2017-03-26 17:38:15 -06001784tpl/u-boot-tpl.bin: tools prepare \
M. Vefa Bicakcidd2081a2017-11-11 22:48:40 -05001785 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
Masahiro Yamada51148792014-07-30 14:08:17 +09001786 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
Ying Zhang3aa29de2013-08-16 15:16:15 +08001787
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001788TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01001789
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001790FIND := find
1791FINDFLAGS := -L
1792
Marian Balakowiczf9328632006-09-01 19:49:50 +02001793tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09001794 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001795 -name '*.[chS]' -print`
Du Huanpeng74d339b2015-05-04 06:26:53 -07001796 ln -s ctags tags
wdenk7ebf7442002-11-02 23:17:16 +00001797
1798etags:
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001799 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001800 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08001801cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001802 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1803 cscope.files
Li Yangffda5862008-02-29 11:46:05 +08001804 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00001805
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001806SYSTEM_MAP = \
1807 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00001808 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001809 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09001810System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09001811 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00001812
1813#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00001814
Scott Wood54799e42013-12-14 11:47:34 +08001815# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1816# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09001817checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08001818 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1819 grep R_A | sort -u`"; \
1820 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1821 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1822 echo "$< contains unexpected relocations: $$RELOC"; \
1823 false; \
1824 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02001825
Stefan Agnerded84f92017-11-14 15:47:18 +01001826envtools: scripts_basic $(version_h) $(timestamp_h)
Tom Rini2d3229b2017-09-05 14:01:29 -04001827 $(Q)$(MAKE) $(build)=tools/env
Mike Frysinger0358df42010-08-15 00:03:21 -04001828
Simon Goldschmidt25770152019-05-24 22:07:04 +02001829tools-only: export TOOLS_ONLY=y
Masahiro Yamada4642e002014-03-31 17:33:51 +09001830tools-only: scripts_basic $(version_h) $(timestamp_h)
1831 $(Q)$(MAKE) $(build)=tools
1832
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09001833tools-all: export HOST_TOOLS_ALL=y
Simon Glass57332952017-09-05 01:53:58 -06001834tools-all: envtools tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04001835
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09001836cross_tools: export CROSS_BUILD_TOOLS=y
1837cross_tools: tools ;
1838
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001839.PHONY : CHANGELOG
1840CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04001841 git log --no-merges U-Boot-1_1_5.. | \
1842 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001843
wdenk7ebf7442002-11-02 23:17:16 +00001844#########################################################################
1845
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001846###
1847# Cleaning is done on three levels.
1848# make clean Delete most generated files
1849# Leave enough to build external modules
1850# make mrproper Delete the current configuration, and all generated files
1851# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00001852
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001853# Directories & files removed with 'make clean'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001854CLEAN_DIRS += $(MODVERDIR) \
1855 $(foreach d, spl tpl, $(patsubst %,$d/%, \
Masahiro Yamada51148792014-07-30 14:08:17 +09001856 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001857
Masahiro Yamadad726f222017-01-30 11:12:08 +09001858CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
Vagrant Cascadian3ee8d912019-05-02 11:14:11 -07001859 boot* u-boot* MLO* SPL System.map fit-dtb.blob*
Mike Frysinger9f4a4202009-10-01 12:11:54 -04001860
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001861# Directories & files removed with 'make mrproper'
Masahiro Yamada51148792014-07-30 14:08:17 +09001862MRPROPER_DIRS += include/config include/generated spl tpl \
Masahiro Yamada45f0ad92014-06-16 18:56:38 +09001863 .tmp_objdiff
Masahiro Yamada51148792014-07-30 14:08:17 +09001864MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
Heinrich Schuchardt1249fa82019-01-29 21:15:21 +01001865 ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1866 drivers/video/fonts/*.S
wdenk7ebf7442002-11-02 23:17:16 +00001867
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001868# clean - Delete most, but leave enough to build external modules
1869#
1870clean: rm-dirs := $(CLEAN_DIRS)
1871clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00001872
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09001873clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00001874
Tom Rini08fcdd32018-07-25 11:38:17 -04001875clean-dirs := $(addprefix _clean_, $(clean-dirs))
wdenk7ebf7442002-11-02 23:17:16 +00001876
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001877PHONY += $(clean-dirs) clean archclean
1878$(clean-dirs):
1879 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1880
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001881clean: $(clean-dirs)
1882 $(call cmd,rmdirs)
1883 $(call cmd,rmfiles)
1884 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1885 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
Heinrich Schuchardtd4c51412019-10-03 16:45:29 +00001886 -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001887 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
Eugeniu Roscae91610d2018-05-19 14:13:50 +02001888 -o -name '*.lex.c' -o -name '*.tab.[ch]' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001889 -o -name '*.symtypes' -o -name 'modules.order' \
1890 -o -name modules.builtin -o -name '.tmp_*.o.*' \
Bin Meng0fbdaa02016-05-22 01:45:25 -07001891 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
Heinrich Schuchardt7f474ef2018-05-24 19:34:45 +02001892 -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
Jagan Teki8f06f0c2019-05-08 00:22:10 +05301893 -type f -print | xargs rm -f \
Suniel Mahesh27351ca2019-08-27 13:27:56 +05301894 bl31.c bl31.elf bl31_*.bin image.map tispl.bin*
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001895
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001896# mrproper - Delete all generated files, including .config
1897#
1898mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1899mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1900mrproper-dirs := $(addprefix _mrproper_,scripts)
1901
1902PHONY += $(mrproper-dirs) mrproper archmrproper
1903$(mrproper-dirs):
1904 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1905
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001906mrproper: clean $(mrproper-dirs)
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001907 $(call cmd,rmdirs)
1908 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09001909 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001910
1911# distclean
1912#
1913PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001914
1915distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001916 @find $(srctree) $(RCS_FIND_IGNORE) \
1917 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1918 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09001919 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1920 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001921 -type f -print | xargs rm -f
Robert P. J. Dayc1180aa2019-01-18 08:41:23 -05001922 @rm -f boards.cfg CHANGELOG
wdenk7ebf7442002-11-02 23:17:16 +00001923
1924backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09001925 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04001926 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00001927
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001928help:
1929 @echo 'Cleaning targets:'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001930 @echo ' clean - Remove most generated files but keep the config'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001931 @echo ' mrproper - Remove all generated files + config + various backup files'
1932 @echo ' distclean - mrproper + remove editor backup and patch files'
1933 @echo ''
Masahiro Yamada51148792014-07-30 14:08:17 +09001934 @echo 'Configuration targets:'
1935 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1936 @echo ''
Simon Glassa3a3f5d2018-10-01 21:12:36 -06001937 @echo 'Test targets:'
1938 @echo ''
1939 @echo ' check - Run all automated tests that use sandbox'
Simon Glass499fde52018-11-18 08:14:29 -07001940 @echo ' qcheck - Run quick automated tests that use sandbox'
Simon Glassa3a3f5d2018-10-01 21:12:36 -06001941 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001942 @echo 'Other generic targets:'
1943 @echo ' all - Build all necessary images depending on configuration'
Simon Glass633cc7a2016-07-31 17:35:01 -06001944 @echo ' tests - Build U-Boot for sandbox and run tests'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001945 @echo '* u-boot - Build the bare u-boot'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001946 @echo ' dir/ - Build all files in dir and below'
1947 @echo ' dir/file.[oisS] - Build specified target only'
1948 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1949 @echo ' (requires a recent binutils and recent build (System.map))'
Igor Grinberg5fc2f922014-07-15 15:52:02 +03001950 @echo ' tags/ctags - Generate ctags file for editors'
1951 @echo ' etags - Generate etags file for editors'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001952 @echo ' cscope - Generate cscope index'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001953 @echo ' ubootrelease - Output the release version string (use with make -s)'
1954 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
Simon Glass1bd87632016-11-13 14:25:50 -07001955 @echo " cfg - Don't build, just create the .cfg files"
Simon Glass84a42062017-09-05 01:53:59 -06001956 @echo " envtools - Build only the target-side environment tools"
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001957 @echo ''
1958 @echo 'Static analysers'
1959 @echo ' checkstack - Generate a list of stack hogs'
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01001960 @echo ' coccicheck - Execute static code analysis with Coccinelle'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001961 @echo ''
1962 @echo 'Documentation targets:'
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00001963 @$(MAKE) -f $(srctree)/doc/Makefile dochelp
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001964 @echo ''
1965 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1966 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1967 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1968 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1969 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1970 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1971 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1972 @echo ' 1: warnings which may be relevant and do not occur too often'
1973 @echo ' 2: warnings which occur quite often but may still be relevant'
1974 @echo ' 3: more obscure warnings, can most likely be ignored'
1975 @echo ' Multiple levels can be combined with W=12 or W=123'
1976 @echo ''
1977 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1978 @echo 'For further info see the ./README file'
1979
Simon Glassa3a3f5d2018-10-01 21:12:36 -06001980tests check:
Simon Glass633cc7a2016-07-31 17:35:01 -06001981 $(srctree)/test/run
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001982
Simon Glass499fde52018-11-18 08:14:29 -07001983qcheck:
1984 $(srctree)/test/run quick
1985
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001986# Documentation targets
1987# ---------------------------------------------------------------------------
Mario Six78a88f72018-07-10 08:40:17 +02001988DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
1989 linkcheckdocs dochelp refcheckdocs
1990PHONY += $(DOC_TARGETS)
1991$(DOC_TARGETS): scripts_basic FORCE
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00001992 $(Q)$(MAKE) $(build)=doc $@
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001993
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001994endif #ifeq ($(config-targets),1)
1995endif #ifeq ($(mixed-targets),1)
1996
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001997PHONY += checkstack ubootrelease ubootversion
1998
1999checkstack:
2000 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
2001 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
2002
2003ubootrelease:
2004 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
2005
2006ubootversion:
2007 @echo $(UBOOTVERSION)
2008
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002009# Single targets
2010# ---------------------------------------------------------------------------
2011# Single targets are compatible with:
2012# - build with mixed source and output
2013# - build with separate output dir 'make O=...'
2014# - external modules
2015#
2016# target-dir => where to store outputfile
2017# build-dir => directory in kernel source tree to use
2018
2019ifeq ($(KBUILD_EXTMOD),)
2020 build-dir = $(patsubst %/,%,$(dir $@))
2021 target-dir = $(dir $@)
2022else
2023 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
2024 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
2025 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
2026endif
2027
2028%.s: %.c prepare scripts FORCE
2029 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2030%.i: %.c prepare scripts FORCE
2031 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2032%.o: %.c prepare scripts FORCE
2033 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2034%.lst: %.c prepare scripts FORCE
2035 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2036%.s: %.S prepare scripts FORCE
2037 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2038%.o: %.S prepare scripts FORCE
2039 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2040%.symtypes: %.c prepare scripts FORCE
2041 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2042
2043# Modules
2044/: prepare scripts FORCE
2045 $(cmd_crmodverdir)
2046 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2047 $(build)=$(build-dir)
2048%/: prepare scripts FORCE
2049 $(cmd_crmodverdir)
2050 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2051 $(build)=$(build-dir)
2052%.ko: prepare scripts FORCE
2053 $(cmd_crmodverdir)
2054 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2055 $(build)=$(build-dir) $(@:.ko=.o)
2056 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
2057
Stefano Babicbdaa73a2019-03-13 09:46:45 +01002058quiet_cmd_genenv = GENENV $@
2059cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
2060 sed --in-place -e 's/\x00/\x0A/g' $@
2061
2062u-boot-initial-env: u-boot.bin
2063 $(call if_changed,genenv)
2064
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01002065# Consistency checks
2066# ---------------------------------------------------------------------------
2067
2068PHONY += coccicheck
2069
2070coccicheck:
2071 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
2072
Michal Simek69c0d322014-04-24 15:24:28 +02002073# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002074# ===========================================================================
2075
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002076quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
2077 cmd_rmdirs = rm -rf $(rm-dirs)
2078
2079quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
2080 cmd_rmfiles = rm -f $(rm-files)
2081
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09002082# read all saved command lines
2083
2084targets := $(wildcard $(sort $(targets)))
2085cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
2086
2087ifneq ($(cmd_files),)
2088 $(cmd_files): ; # Do not try to update included dependency files
2089 include $(cmd_files)
2090endif
2091
Masahiro Yamada9e414032014-02-04 17:24:24 +09002092endif # skip-makefile
2093
2094PHONY += FORCE
2095FORCE:
2096
2097# Declare the contents of the .PHONY variable as phony. We keep that
2098# information in a variable so we can use it in if_changed and friends.
2099.PHONY: $(PHONY)