blob: 4185cfac12e12ad2a6b75671aeaab210bf0d3871 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +05302/*
3 * Copyright 2013 Freescale Semiconductor, Inc.
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +05304 */
5
6/*
7 * The RGMII PHYs are provided by the two on-board PHY connected to
8 * dTSEC instances 4 and 5. The SGMII PHYs are provided by one on-board
9 * PHY or by the standard four-port SGMII riser card (VSC).
10 */
11
12#include <common.h>
13#include <netdev.h>
14#include <asm/fsl_serdes.h>
15#include <asm/immap_85xx.h>
16#include <fm_eth.h>
17#include <fsl_mdio.h>
18#include <malloc.h>
Shaohui Xie8225b2f2015-10-26 19:47:47 +080019#include <fsl_dtsec.h>
Codrin Ciubotariua83fccc2015-01-21 11:54:11 +020020#include <vsc9953.h>
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +053021
22#include "../common/fman.h"
23#include "../common/qixis.h"
24
25#include "t1040qds_qixis.h"
26
27#ifdef CONFIG_FMAN_ENET
28 /* - In T1040 there are only 8 SERDES lanes, spread across 2 SERDES banks.
29 * Bank 1 -> Lanes A, B, C, D
30 * Bank 2 -> Lanes E, F, G, H
31 */
32
33 /* Mapping of 8 SERDES lanes to T1040 QDS board slots. A value of '0' here
34 * means that the mapping must be determined dynamically, or that the lane
35 * maps to something other than a board slot.
36 */
37static u8 lane_to_slot[] = {
38 0, 0, 0, 0, 0, 0, 0, 0
39};
40
41/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
42 * housed.
43 */
44static int riser_phy_addr[] = {
45 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR,
46 CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR,
47 CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR,
48 CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR,
49};
50
51/* Slot2 does not have EMI connections */
52#define EMI_NONE 0xFFFFFFFF
53#define EMI1_RGMII0 0
54#define EMI1_RGMII1 1
55#define EMI1_SLOT1 2
56#define EMI1_SLOT3 3
57#define EMI1_SLOT4 4
58#define EMI1_SLOT5 5
59#define EMI1_SLOT6 6
60#define EMI1_SLOT7 7
61#define EMI2 8
62
63static int mdio_mux[NUM_FM_PORTS];
64
65static const char * const mdio_names[] = {
66 "T1040_QDS_MDIO0",
67 "T1040_QDS_MDIO1",
68 "T1040_QDS_MDIO2",
69 "T1040_QDS_MDIO3",
70 "T1040_QDS_MDIO4",
71 "T1040_QDS_MDIO5",
72 "T1040_QDS_MDIO6",
73 "T1040_QDS_MDIO7",
74};
75
76struct t1040_qds_mdio {
77 u8 muxval;
78 struct mii_dev *realbus;
79};
80
81static const char *t1040_qds_mdio_name_for_muxval(u8 muxval)
82{
83 return mdio_names[muxval];
84}
85
86struct mii_dev *mii_dev_for_muxval(u8 muxval)
87{
88 struct mii_dev *bus;
89 const char *name = t1040_qds_mdio_name_for_muxval(muxval);
90
91 if (!name) {
92 printf("No bus for muxval %x\n", muxval);
93 return NULL;
94 }
95
96 bus = miiphy_get_dev_by_name(name);
97
98 if (!bus) {
99 printf("No bus by name %s\n", name);
100 return NULL;
101 }
102
103 return bus;
104}
105
106static void t1040_qds_mux_mdio(u8 muxval)
107{
108 u8 brdcfg4;
109 if (muxval <= 7) {
110 brdcfg4 = QIXIS_READ(brdcfg[4]);
111 brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
112 brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
113 QIXIS_WRITE(brdcfg[4], brdcfg4);
114 }
115}
116
117static int t1040_qds_mdio_read(struct mii_dev *bus, int addr, int devad,
118 int regnum)
119{
120 struct t1040_qds_mdio *priv = bus->priv;
121
122 t1040_qds_mux_mdio(priv->muxval);
123
124 return priv->realbus->read(priv->realbus, addr, devad, regnum);
125}
126
127static int t1040_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
128 int regnum, u16 value)
129{
130 struct t1040_qds_mdio *priv = bus->priv;
131
132 t1040_qds_mux_mdio(priv->muxval);
133
134 return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
135}
136
137static int t1040_qds_mdio_reset(struct mii_dev *bus)
138{
139 struct t1040_qds_mdio *priv = bus->priv;
140
141 return priv->realbus->reset(priv->realbus);
142}
143
144static int t1040_qds_mdio_init(char *realbusname, u8 muxval)
145{
146 struct t1040_qds_mdio *pmdio;
147 struct mii_dev *bus = mdio_alloc();
148
149 if (!bus) {
150 printf("Failed to allocate t1040_qds MDIO bus\n");
151 return -1;
152 }
153
154 pmdio = malloc(sizeof(*pmdio));
155 if (!pmdio) {
156 printf("Failed to allocate t1040_qds private data\n");
157 free(bus);
158 return -1;
159 }
160
161 bus->read = t1040_qds_mdio_read;
162 bus->write = t1040_qds_mdio_write;
163 bus->reset = t1040_qds_mdio_reset;
Ben Whitten192bc692015-12-30 13:05:58 +0000164 strcpy(bus->name, t1040_qds_mdio_name_for_muxval(muxval));
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530165
166 pmdio->realbus = miiphy_get_dev_by_name(realbusname);
167
168 if (!pmdio->realbus) {
169 printf("No bus with name %s\n", realbusname);
170 free(bus);
171 free(pmdio);
172 return -1;
173 }
174
175 pmdio->muxval = muxval;
176 bus->priv = pmdio;
177
178 return mdio_register(bus);
179}
180
181/*
182 * Initialize the lane_to_slot[] array.
183 *
184 * On the T1040QDS board the mapping is controlled by ?? register.
185 */
186static void initialize_lane_to_slot(void)
187{
188 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
189 int serdes1_prtcl = (in_be32(&gur->rcwsr[4]) &
190 FSL_CORENET2_RCWSR4_SRDS1_PRTCL)
191 >> FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
192
193 QIXIS_WRITE(cms[0], 0x07);
194
195 switch (serdes1_prtcl) {
196 case 0x60:
197 case 0x66:
198 case 0x67:
199 case 0x69:
200 lane_to_slot[1] = 7;
201 lane_to_slot[2] = 6;
202 lane_to_slot[3] = 5;
203 break;
204 case 0x86:
205 lane_to_slot[1] = 7;
206 lane_to_slot[2] = 7;
207 lane_to_slot[3] = 7;
208 break;
209 case 0x87:
210 lane_to_slot[1] = 7;
211 lane_to_slot[2] = 7;
212 lane_to_slot[3] = 7;
213 lane_to_slot[7] = 7;
214 break;
215 case 0x89:
216 lane_to_slot[1] = 7;
217 lane_to_slot[2] = 7;
218 lane_to_slot[3] = 7;
Codrin Ciubotariuea191e62015-01-12 14:08:35 +0200219 lane_to_slot[6] = 7;
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530220 lane_to_slot[7] = 7;
221 break;
222 case 0x8d:
223 lane_to_slot[1] = 7;
224 lane_to_slot[2] = 7;
225 lane_to_slot[3] = 7;
226 lane_to_slot[5] = 3;
227 lane_to_slot[6] = 3;
228 lane_to_slot[7] = 3;
229 break;
230 case 0x8F:
231 case 0x85:
232 lane_to_slot[1] = 7;
233 lane_to_slot[2] = 6;
234 lane_to_slot[3] = 5;
235 lane_to_slot[6] = 3;
236 lane_to_slot[7] = 3;
237 break;
238 case 0xA5:
239 lane_to_slot[1] = 7;
240 lane_to_slot[6] = 3;
241 lane_to_slot[7] = 3;
242 break;
243 case 0xA7:
244 lane_to_slot[1] = 7;
Priyanka Jain5273aa32014-09-08 13:20:52 +0530245 lane_to_slot[2] = 6;
246 lane_to_slot[3] = 5;
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530247 lane_to_slot[7] = 7;
248 break;
249 case 0xAA:
250 lane_to_slot[1] = 7;
251 lane_to_slot[6] = 7;
252 lane_to_slot[7] = 7;
253 break;
254 case 0x40:
255 lane_to_slot[2] = 7;
256 lane_to_slot[3] = 7;
257 break;
258 default:
259 printf("qds: Fman: Unsupported SerDes Protocol 0x%02x\n",
260 serdes1_prtcl);
261 break;
262 }
263}
264
265/*
266 * Given the following ...
267 *
268 * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
269 * compatible string and 'addr' physical address)
270 *
271 * 2) An Fman port
272 *
273 * ... update the phy-handle property of the Ethernet node to point to the
274 * right PHY. This assumes that we already know the PHY for each port.
275 *
276 * The offset of the Fman Ethernet node is also passed in for convenience, but
277 * it is not used, and we recalculate the offset anyway.
278 *
279 * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
280 * Inside the Fman, "ports" are things that connect to MACs. We only call them
281 * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
282 * and ports are the same thing.
283 *
284 */
285void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
286 enum fm_port port, int offset)
287{
288 phy_interface_t intf = fm_info_get_enet_if(port);
289 char phy[16];
290
291 /* The RGMII PHY is identified by the MAC connected to it */
292 if (intf == PHY_INTERFACE_MODE_RGMII) {
293 sprintf(phy, "rgmii_phy%u", port == FM1_DTSEC4 ? 1 : 2);
294 fdt_set_phy_handle(fdt, compat, addr, phy);
295 }
296
297 /* The SGMII PHY is identified by the MAC connected to it */
298 if (intf == PHY_INTERFACE_MODE_SGMII) {
299 int lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1
300 + port);
301 u8 slot;
302 if (lane < 0)
303 return;
304 slot = lane_to_slot[lane];
305 if (slot) {
306 /* Slot housing a SGMII riser card */
307 sprintf(phy, "phy_s%x_%02x", slot,
308 (fm_info_get_phy_address(port - FM1_DTSEC1)-
309 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + 1));
310 fdt_set_phy_handle(fdt, compat, addr, phy);
311 }
312 }
313}
314
315void fdt_fixup_board_enet(void *fdt)
316{
317 int i, lane, idx;
318
319 for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
320 idx = i - FM1_DTSEC1;
321 switch (fm_info_get_enet_if(i)) {
322 case PHY_INTERFACE_MODE_SGMII:
323 lane = serdes_get_first_lane(FSL_SRDS_1,
324 SGMII_FM1_DTSEC1 + idx);
325 if (lane < 0)
326 break;
327
328 switch (mdio_mux[i]) {
329 case EMI1_SLOT3:
330 fdt_status_okay_by_alias(fdt, "emi1_slot3");
331 break;
332 case EMI1_SLOT5:
333 fdt_status_okay_by_alias(fdt, "emi1_slot5");
334 break;
335 case EMI1_SLOT6:
336 fdt_status_okay_by_alias(fdt, "emi1_slot6");
337 break;
338 case EMI1_SLOT7:
339 fdt_status_okay_by_alias(fdt, "emi1_slot7");
340 break;
341 }
342 break;
343 case PHY_INTERFACE_MODE_RGMII:
344 if (i == FM1_DTSEC4)
345 fdt_status_okay_by_alias(fdt, "emi1_rgmii0");
346
347 if (i == FM1_DTSEC5)
348 fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
349 break;
350 default:
351 break;
352 }
353 }
354}
355#endif /* #ifdef CONFIG_FMAN_ENET */
356
357static void set_brdcfg9_for_gtx_clk(void)
358{
359 u8 brdcfg9;
360 brdcfg9 = QIXIS_READ(brdcfg[9]);
vijay rai66660172014-06-20 10:45:29 +0530361/* Initializing EPHY2 clock to RGMII mode */
362 brdcfg9 &= ~(BRDCFG9_EPHY2_MASK);
363 brdcfg9 |= (BRDCFG9_EPHY2_VAL);
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530364 QIXIS_WRITE(brdcfg[9], brdcfg9);
365}
366
367void t1040_handle_phy_interface_sgmii(int i)
368{
369 int lane, idx, slot;
370 idx = i - FM1_DTSEC1;
371 lane = serdes_get_first_lane(FSL_SRDS_1,
372 SGMII_FM1_DTSEC1 + idx);
373
374 if (lane < 0)
375 return;
376 slot = lane_to_slot[lane];
377
378 switch (slot) {
379 case 1:
380 mdio_mux[i] = EMI1_SLOT1;
381 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
382 break;
383 case 3:
384 if (FM1_DTSEC4 == i)
385 fm_info_set_phy_address(i, riser_phy_addr[0]);
386 if (FM1_DTSEC5 == i)
387 fm_info_set_phy_address(i, riser_phy_addr[1]);
388
389 mdio_mux[i] = EMI1_SLOT3;
390
391 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
392 break;
393 case 4:
394 mdio_mux[i] = EMI1_SLOT4;
395 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
396 break;
397 case 5:
398 /* Slot housing a SGMII riser card? */
399 fm_info_set_phy_address(i, riser_phy_addr[0]);
400 mdio_mux[i] = EMI1_SLOT5;
401 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
402 break;
403 case 6:
404 /* Slot housing a SGMII riser card? */
405 fm_info_set_phy_address(i, riser_phy_addr[0]);
406 mdio_mux[i] = EMI1_SLOT6;
407 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
408 break;
409 case 7:
410 if (FM1_DTSEC1 == i)
411 fm_info_set_phy_address(i, riser_phy_addr[0]);
412 if (FM1_DTSEC2 == i)
413 fm_info_set_phy_address(i, riser_phy_addr[1]);
414 if (FM1_DTSEC3 == i)
415 fm_info_set_phy_address(i, riser_phy_addr[2]);
Priyanka Jain5273aa32014-09-08 13:20:52 +0530416 if (FM1_DTSEC5 == i)
417 fm_info_set_phy_address(i, riser_phy_addr[3]);
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530418
419 mdio_mux[i] = EMI1_SLOT7;
420 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
421 break;
422 default:
423 break;
424 }
425 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
426}
427void t1040_handle_phy_interface_rgmii(int i)
428{
429 fm_info_set_phy_address(i, i == FM1_DTSEC5 ?
430 CONFIG_SYS_FM1_DTSEC5_PHY_ADDR :
431 CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
432 mdio_mux[i] = (i == FM1_DTSEC5) ? EMI1_RGMII1 :
433 EMI1_RGMII0;
434 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
435}
436
437int board_eth_init(bd_t *bis)
438{
439#ifdef CONFIG_FMAN_ENET
440 struct memac_mdio_info memac_mdio_info;
441 unsigned int i;
Codrin Ciubotariua83fccc2015-01-21 11:54:11 +0200442#ifdef CONFIG_VSC9953
443 int lane;
444 int phy_addr;
445 phy_interface_t phy_int;
446 struct mii_dev *bus;
447#endif
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530448
449 printf("Initializing Fman\n");
450 set_brdcfg9_for_gtx_clk();
451
452 initialize_lane_to_slot();
453
454 /* Initialize the mdio_mux array so we can recognize empty elements */
455 for (i = 0; i < NUM_FM_PORTS; i++)
456 mdio_mux[i] = EMI_NONE;
457
458 memac_mdio_info.regs =
459 (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
460 memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
461
462 /* Register the real 1G MDIO bus */
463 fm_memac_mdio_init(bis, &memac_mdio_info);
464
465 /* Register the muxing front-ends to the MDIO buses */
466 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII0);
467 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
468 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
469 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
470 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
471 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
472 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
473 t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
474
475 /*
476 * Program on board RGMII PHY addresses. If the SGMII Riser
477 * card used, we'll override the PHY address later. For any DTSEC that
478 * is RGMII, we'll also override its PHY address later. We assume that
479 * DTSEC4 and DTSEC5 are used for RGMII.
480 */
481 fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
482 fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
483
484 for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
485 switch (fm_info_get_enet_if(i)) {
486 case PHY_INTERFACE_MODE_QSGMII:
Codrin Ciubotariud9fb29c2015-01-12 14:08:36 +0200487 fm_info_set_mdio(i, NULL);
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530488 break;
489 case PHY_INTERFACE_MODE_SGMII:
490 t1040_handle_phy_interface_sgmii(i);
491 break;
492
493 case PHY_INTERFACE_MODE_RGMII:
494 /* Only DTSEC4 and DTSEC5 can be routed to RGMII */
495 t1040_handle_phy_interface_rgmii(i);
496 break;
497 default:
498 break;
499 }
500 }
501
Codrin Ciubotariua83fccc2015-01-21 11:54:11 +0200502#ifdef CONFIG_VSC9953
503 for (i = 0; i < VSC9953_MAX_PORTS; i++) {
504 lane = -1;
505 phy_addr = 0;
506 phy_int = PHY_INTERFACE_MODE_NONE;
507 switch (i) {
508 case 0:
509 case 1:
510 case 2:
511 case 3:
512 lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A);
513 /* PHYs connected over QSGMII */
514 if (lane >= 0) {
515 phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR +
516 i;
517 phy_int = PHY_INTERFACE_MODE_QSGMII;
518 break;
519 }
520 lane = serdes_get_first_lane(FSL_SRDS_1,
521 SGMII_SW1_MAC1 + i);
522
523 if (lane < 0)
524 break;
525
526 /* PHYs connected over QSGMII */
527 if (i != 3 || lane_to_slot[lane] == 7)
528 phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
529 + i;
530 else
531 phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR;
532 phy_int = PHY_INTERFACE_MODE_SGMII;
533 break;
534 case 4:
535 case 5:
536 case 6:
537 case 7:
538 lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B);
539 /* PHYs connected over QSGMII */
540 if (lane >= 0) {
541 phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR +
542 i - 4;
543 phy_int = PHY_INTERFACE_MODE_QSGMII;
544 break;
545 }
546 lane = serdes_get_first_lane(FSL_SRDS_1,
547 SGMII_SW1_MAC1 + i);
548 /* PHYs connected over SGMII */
549 if (lane >= 0) {
550 phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
551 + i - 3;
552 phy_int = PHY_INTERFACE_MODE_SGMII;
553 }
554 break;
555 case 8:
556 if (serdes_get_first_lane(FSL_SRDS_1,
557 SGMII_FM1_DTSEC1) < 0)
558 /* FM1@DTSEC1 is connected to SW1@PORT8 */
559 vsc9953_port_enable(i);
560 break;
561 case 9:
562 if (serdes_get_first_lane(FSL_SRDS_1,
563 SGMII_FM1_DTSEC2) < 0) {
564 /* Enable L2 On MAC2 using SCFG */
565 struct ccsr_scfg *scfg = (struct ccsr_scfg *)
566 CONFIG_SYS_MPC85xx_SCFG;
567
568 out_be32(&scfg->esgmiiselcr,
569 in_be32(&scfg->esgmiiselcr) |
570 (0x80000000));
571 vsc9953_port_enable(i);
572 }
573 break;
574 }
575
576 if (lane >= 0) {
577 bus = mii_dev_for_muxval(lane_to_slot[lane]);
578 vsc9953_port_info_set_mdio(i, bus);
579 vsc9953_port_enable(i);
580 }
581 vsc9953_port_info_set_phy_address(i, phy_addr);
582 vsc9953_port_info_set_phy_int(i, phy_int);
583 }
584
585#endif
Prabhakar Kushwaha5b7672f2014-01-27 15:55:20 +0530586 cpu_eth_init(bis);
587#endif
588
589 return pci_eth_init(bis);
590}