blob: 14dbf31bf230eecb347120f7bbbbf352c4cd3c8b [file] [log] [blame]
Codrin Ciubotariu6706b112015-01-12 14:08:33 +02001This file contains information for VSC9953, a Vitesse L2 Switch IP
2which is integrated in the T1040/T1020 Freescale SoCs.
3
4About Device:
5=============
6VSC9953 is an 8-port Gigabit Ethernet switch supports the following features:
7 - 8192 MAC addresses
8 - Static Address provisioning
9 - Dynamic learning of MAC addresses and aging
10 - 4096 VLANs
11 - Independent and shared VLAN learning (IVL, SVL)
12 - Policing with storm control and MC/BC protection
13 - IPv4 and IPv6 multicast
14 - Jumbo frames (9.6 KB)
15 - Access Control List
16 - VLAN editing, translation and remarking
17 - RMON counters per port
18
19Switch interfaces:
20 - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs
21 - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links)
22 to FMan ports (FM1@DTSEC1 and FM1@DTSEC2)
23
24Commands Overview:
25=============
26Commands supported
27 - enable/disable a port
28 - check a port's link speed, duplexity and status.
29
30Commands syntax
31 ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
32 ethsw port <port_nr> show - show an l2 switch port's configuration
33
34 port_nr=0..9; use "all" for all ports
35
36=> ethsw port all show
37 Port Status Link Speed Duplex
38 0 enabled down 10 half
39 1 enabled down 10 half
40 2 enabled down 10 half
41 3 enabled up 1000 full
42 4 disabled down - half
43 5 disabled down - half
44 6 disabled down - half
45 7 disabled down - half
46 8 enabled up 2500 full
47 9 enabled up 2500 full
48=>