blob: 1b56f8c6aaa017dc805d55858e24b9e5ffa385bd [file] [log] [blame]
wdenk281e00a2004-08-01 22:48:16 +00001/*
2 * Copyright (C) 2003 ETC s.r.o.
3 *
4 * This code was inspired by Marius Groeger and Kyle Harris code
5 * available in other board ports for U-Boot
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 *
25 * Written by Peter Figuli <peposh@etc.sk>, 2003.
26 *
27 */
28
29#include <common.h>
30#include "intel.h"
31
32
33/*
34 * This code should handle CFI FLASH memory device. This code is very
35 * minimalistic approach without many essential error handling code as well.
36 * Because U-Boot actually is missing smart handling of FLASH device,
37 * we just set flash_id to anything else to FLASH_UNKNOW, so common code
38 * can call us without any restrictions.
39 * TODO: Add CFI Query, to be able to determine FLASH device.
40 * TODO: Add error handling code
41 * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
42 * hopefully may work with other configurations.
43 */
44
45#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
46# define FLASH_BUS vu_char
47# if ( SCB9328_FLASH_INTERLEAVE == 1 )
48# define FLASH_CMD( x ) x
49# else
50# error "With 8bit bus only one chip is allowed"
51# endif
52
53
54#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
55# define FLASH_BUS vu_short
56# if ( SCB9328_FLASH_INTERLEAVE == 1 )
57# define FLASH_CMD( x ) x
58# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
59# define FLASH_CMD( x ) (( x << 8 )| x )
60# else
61# error "With 16bit bus only 1 or 2 chip(s) are allowed"
62# endif
63
64
65#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
66# define FLASH_BUS vu_long
67# if ( SCB9328_FLASH_INTERLEAVE == 1 )
68# define FLASH_CMD( x ) x
69# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
70# define FLASH_CMD( x ) (( x << 16 )| x )
71# elif ( SCB9328_FLASH_INTERLEAVE == 4 )
72# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
73# else
74# error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
75# endif
76
77#else
78# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
79#endif
80
81
82flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
83
84static FLASH_BUS flash_status_reg (void)
85{
86
87 FLASH_BUS *addr = (FLASH_BUS *) 0;
88
89 *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
90
91 return *addr;
92}
93
94static int flash_ready (ulong timeout)
95{
96 int ok = 1;
97
98 reset_timer_masked ();
99 while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
100 FLASH_CMD (CFI_INTEL_SR_READY)) {
101 if (get_timer_masked () > timeout && timeout != 0) {
102 ok = 0;
103 break;
104 }
105 }
106 return ok;
107}
108
109#if ( CFG_MAX_FLASH_BANKS != 1 )
110# error "SCB9328 platform has only one flash bank!"
111#endif
112
113
114ulong flash_init (void)
115{
116 int i;
117 unsigned long address = SCB9328_FLASH_BASE;
118
119 flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
120 flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
121 flash_info[0].flash_id = INTEL_MANUFACT;
122 memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
123
124 for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
125 flash_info[0].start[i] = address;
126#ifdef SCB9328_FLASH_UNLOCK
127 /* Some devices are hw locked after start. */
128 *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
129 *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
130 flash_ready (0);
131 *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
132#endif
133 address += SCB9328_FLASH_SECT_SIZE;
134 }
135
136 flash_protect (FLAG_PROTECT_SET,
137 CFG_FLASH_BASE,
138 CFG_FLASH_BASE + monitor_flash_len - 1,
139 &flash_info[0]);
140
141 flash_protect (FLAG_PROTECT_SET,
142 CFG_ENV_ADDR,
143 CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
144
145 return SCB9328_FLASH_BANK_SIZE;
146}
147
148void flash_print_info (flash_info_t * info)
149{
150 int i;
151
152 printf (" Intel vendor\n");
153 printf (" Size: %ld MB in %d Sectors\n",
154 info->size >> 20, info->sector_count);
155
156 printf (" Sector Start Addresses:");
157 for (i = 0; i < info->sector_count; i++) {
158 if (!(i % 5)) {
159 printf ("\n");
160 }
161
162 printf (" %08lX%s", info->start[i],
163 info->protect[i] ? " (RO)" : " ");
164 }
165 printf ("\n");
166}
167
168
169int flash_erase (flash_info_t * info, int s_first, int s_last)
170{
171 int flag, non_protected = 0, sector;
172 int rc = ERR_OK;
173
174 FLASH_BUS *address;
175
176 for (sector = s_first; sector <= s_last; sector++) {
177 if (!info->protect[sector]) {
178 non_protected++;
179 }
180 }
181
182 if (!non_protected) {
183 return ERR_PROTECTED;
184 }
185
186 /*
187 * Disable interrupts which might cause a timeout
188 * here. Remember that our exception vectors are
189 * at address 0 in the flash, and we don't want a
190 * (ticker) exception to happen while the flash
191 * chip is in programming mode.
192 */
193 flag = disable_interrupts ();
194
195
196 /* Start erase on unprotected sectors */
197 for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
198 if (info->protect[sector]) {
199 printf ("Protected sector %2d skipping...\n", sector);
200 continue;
201 } else {
202 printf ("Erasing sector %2d ... ", sector);
203 }
204
205 address = (FLASH_BUS *) (info->start[sector]);
206
207 *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
208 *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
209 if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
210 *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
211 printf ("ok.\n");
212 } else {
213 *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
214 rc = ERR_TIMOUT;
215 printf ("timeout! Aborting...\n");
216 break;
217 }
218 *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
219 }
220 if (ctrlc ())
221 printf ("User Interrupt!\n");
222
223 /* allow flash to settle - wait 10 ms */
224 udelay_masked (10000);
225 if (flag) {
226 enable_interrupts ();
227 }
228
229 return rc;
230}
231
232static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
233{
234 FLASH_BUS *address = (FLASH_BUS *) dest;
235 int rc = ERR_OK;
236 int flag;
237
238 /* Check if Flash is (sufficiently) erased */
239 if ((*address & data) != data) {
240 return ERR_NOT_ERASED;
241 }
242
243 /*
244 * Disable interrupts which might cause a timeout
245 * here. Remember that our exception vectors are
246 * at address 0 in the flash, and we don't want a
247 * (ticker) exception to happen while the flash
248 * chip is in programming mode.
249 */
250
251 flag = disable_interrupts ();
252
253 *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
254 *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
255 *address = data;
256
257 if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
258 *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
259 rc = ERR_TIMOUT;
260 printf ("timeout! Aborting...\n");
261 }
262
263 *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
264 if (flag) {
265 enable_interrupts ();
266 }
267
268 return rc;
269}
270
271int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
272{
273 ulong read_addr, write_addr;
274 FLASH_BUS data;
275 int i, result = ERR_OK;
276
277
278 read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
279 write_addr = read_addr;
280 if (read_addr != addr) {
281 data = 0;
282 for (i = 0; i < sizeof (FLASH_BUS); i++) {
283 if (read_addr < addr || cnt == 0) {
284 data |= *((uchar *) read_addr) << i * 8;
285 } else {
286 data |= (*src++) << i * 8;
287 cnt--;
288 }
289 read_addr++;
290 }
291 if ((result = write_data (info, write_addr, data)) != ERR_OK) {
292 return result;
293 }
294 write_addr += sizeof (FLASH_BUS);
295 }
296 for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
297 if ((result = write_data (info, write_addr,
298 *((FLASH_BUS *) src))) != ERR_OK) {
299 return result;
300 }
301 write_addr += sizeof (FLASH_BUS);
302 src += sizeof (FLASH_BUS);
303 }
304 if (cnt > 0) {
305 read_addr = write_addr;
306 data = 0;
307 for (i = 0; i < sizeof (FLASH_BUS); i++) {
308 if (cnt > 0) {
309 data |= (*src++) << i * 8;
310 cnt--;
311 } else {
312 data |= *((uchar *) read_addr) << i * 8;
313 }
314 read_addr++;
315 }
316 if ((result = write_data (info, write_addr, data)) != 0) {
317 return result;
318 }
319 }
320 return ERR_OK;
321}