blob: eb8ffda67e1a18102678f9c5133c3a829179f172 [file] [log] [blame]
Max Krummenacher592f4ae2016-11-30 19:43:08 +01001/*
2 * Copyright 2013-2015 Toradex, Inc.
3 *
4 * Configuration settings for the Toradex Apalis iMX6
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#include "mx6_common.h"
Max Krummenacher592f4ae2016-11-30 19:43:08 +010013
14#undef CONFIG_DISPLAY_BOARDINFO
Max Krummenacher592f4ae2016-11-30 19:43:08 +010015
16#define CONFIG_MACH_TYPE 4886
17
18#define CONFIG_SYS_GENERIC_BOARD
19
20#include <asm/arch/imx-regs.h>
Stefano Babic552a8482017-06-29 10:16:06 +020021#include <asm/mach-imx/gpio.h>
Max Krummenacher592f4ae2016-11-30 19:43:08 +010022
23#ifdef CONFIG_SPL
24#include "imx6_spl.h"
Max Krummenacher592f4ae2016-11-30 19:43:08 +010025#endif
26
27#define CONFIG_CMDLINE_TAG
28#define CONFIG_SETUP_MEMORY_TAGS
29#define CONFIG_INITRD_TAG
30#define CONFIG_REVISION_TAG
31#define CONFIG_SERIAL_TAG
32
33/* Size of malloc() pool */
34#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
35
Max Krummenacher592f4ae2016-11-30 19:43:08 +010036#define CONFIG_MISC_INIT_R
37
38#define CONFIG_MXC_UART
39#define CONFIG_MXC_UART_BASE UART1_BASE
40
Max Krummenacher592f4ae2016-11-30 19:43:08 +010041/* I2C Configs */
42#define CONFIG_SYS_I2C
43#define CONFIG_SYS_I2C_MXC
44#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
45#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
46#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
47#define CONFIG_SYS_I2C_SPEED 100000
48
49/* OCOTP Configs */
Max Krummenacher592f4ae2016-11-30 19:43:08 +010050#ifdef CONFIG_CMD_FUSE
51#define CONFIG_MXC_OCOTP
52#endif
53
54/* MMC Configs */
Max Krummenacher592f4ae2016-11-30 19:43:08 +010055#define CONFIG_FSL_USDHC
56#define CONFIG_SYS_FSL_ESDHC_ADDR 0
57#define CONFIG_SYS_FSL_USDHC_NUM 3
58
59#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
Max Krummenacher592f4ae2016-11-30 19:43:08 +010060#define CONFIG_BOUNCE_BUFFER
Max Krummenacher592f4ae2016-11-30 19:43:08 +010061
Max Krummenacher592f4ae2016-11-30 19:43:08 +010062/*
63 * SATA Configs
64 */
65#ifdef CONFIG_CMD_SATA
Max Krummenacher592f4ae2016-11-30 19:43:08 +010066#define CONFIG_SYS_SATA_MAX_DEVICE 1
67#define CONFIG_DWC_AHSATA_PORT_ID 0
68#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
69#define CONFIG_LBA48
Max Krummenacher592f4ae2016-11-30 19:43:08 +010070#endif
71
72/* Network */
73#define CONFIG_FEC_MXC
74#define CONFIG_MII
75#define IMX_FEC_BASE ENET_BASE_ADDR
76#define CONFIG_FEC_XCV_TYPE RGMII
77#define CONFIG_ETHPRIME "FEC"
78#define CONFIG_FEC_MXC_PHYADDR 6
Max Krummenacher592f4ae2016-11-30 19:43:08 +010079#define CONFIG_IP_DEFRAG
80#define CONFIG_TFTP_BLOCKSIZE 4096
81#define CONFIG_TFTP_TSIZE
82
83/* USB Configs */
84/* Host */
Max Krummenacher592f4ae2016-11-30 19:43:08 +010085#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
86#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
87#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
88#define CONFIG_MXC_USB_FLAGS 0
Max Krummenacher592f4ae2016-11-30 19:43:08 +010089/* Client */
Max Krummenacher592f4ae2016-11-30 19:43:08 +010090#define CONFIG_USBD_HS
91
92#define CONFIG_USB_GADGET_MASS_STORAGE
Max Krummenacher592f4ae2016-11-30 19:43:08 +010093/* USB DFU */
94#define CONFIG_DFU_MMC
95
96/* Miscellaneous commands */
Max Krummenacher592f4ae2016-11-30 19:43:08 +010097
98/* Framebuffer and LCD */
99#define CONFIG_VIDEO_IPUV3
100#define CONFIG_SYS_CONSOLE_IS_IN_ENV
101#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
102#define CONFIG_VIDEO_BMP_RLE8
103#define CONFIG_SPLASH_SCREEN
104#define CONFIG_SPLASH_SCREEN_ALIGN
105#define CONFIG_BMP_16BPP
106#define CONFIG_VIDEO_LOGO
107#define CONFIG_VIDEO_BMP_LOGO
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100108#define CONFIG_CONSOLE_MUX
109#define CONFIG_IMX_HDMI
110#define CONFIG_IMX_VIDEO_SKIP
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100111
112/* allow to overwrite serial and ethaddr */
113#define CONFIG_ENV_OVERWRITE
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100114
115/* Command definition */
116#undef CONFIG_CMD_LOADB
117#undef CONFIG_CMD_LOADS
118#undef CONFIG_CMD_NFS
119#undef CONFIG_CMD_FLASH
120
121#undef CONFIG_IPADDR
122#define CONFIG_IPADDR 192.168.10.2
123#define CONFIG_NETMASK 255.255.255.0
124#undef CONFIG_SERVERIP
125#define CONFIG_SERVERIP 192.168.10.1
126
127#define CONFIG_LOADADDR 0x12000000
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100128
129#ifdef CONFIG_CMD_SATA
130#define CONFIG_DRIVE_SATA "sata "
131#else
132#define CONFIG_DRIVE_SATA
133#endif
134
135#ifdef CONFIG_CMD_MMC
136#define CONFIG_DRIVE_MMC "mmc "
137#else
138#define CONFIG_DRIVE_MMC
139#endif
140
141#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
142
143#define DFU_ALT_EMMC_INFO \
144 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
145 "boot part 0 1;" \
146 "rootfs part 0 2;" \
147 "uImage fat 0 1;" \
148 "imx6q-colibri-eval-v3.dtb fat 0 1;" \
149 "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
150
151#define EMMC_BOOTCMD \
152 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
153 "rootwait\0" \
154 "emmcboot=run setup; " \
155 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
156 "${vidargs}; echo Booting from internal eMMC chip...; " \
157 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
158 "${boot_file} && run fdt_fixup && " \
159 "bootm ${kernel_addr_r} ${dtbparam}\0" \
160 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
161 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
162
163#define MEM_LAYOUT_ENV_SETTINGS \
Stefan Agner9af131e2017-03-09 17:17:51 -0800164 "bootm_size=0x20000000\0" \
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100165 "fdt_addr_r=0x12000000\0" \
166 "fdt_high=0xffffffff\0" \
167 "initrd_high=0xffffffff\0" \
168 "kernel_addr_r=0x11000000\0" \
169 "ramdisk_addr_r=0x12100000\0"
170
171#define NFS_BOOTCMD \
172 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
173 "nfsboot=run setup; " \
174 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
175 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
176 "run nfsdtbload; dhcp ${kernel_addr_r} " \
177 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
178 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
179 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
180
181#define SD_BOOTCMD \
182 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
183 "rootwait\0" \
184 "sdboot=run setup; " \
185 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
186 "${vidargs}; echo Booting from SD card; " \
187 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
188 "${boot_file} && run fdt_fixup && " \
189 "bootm ${kernel_addr_r} ${dtbparam}\0" \
190 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
191 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
192
193#define USB_BOOTCMD \
194 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
195 "rootwait\0" \
196 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
197 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
198 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
199 "${boot_file} && run fdt_fixup && " \
200 "bootm ${kernel_addr_r} ${dtbparam}\0" \
201 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
202 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
203
204#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
205#define FDT_FILE "imx6q-apalis-eval.dtb"
206#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
207#else
208#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
209#endif
210#define CONFIG_EXTRA_ENV_SETTINGS \
211 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
212 "run nfsboot ; echo ; echo nfsboot failed ; " \
213 "usb start ;" \
214 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
215 "boot_file=uImage\0" \
216 "console=ttymxc0\0" \
217 "defargs=enable_wait_mode=off vmalloc=400M\0" \
218 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
219 EMMC_BOOTCMD \
220 "fdt_file=" FDT_FILE "\0" \
221 "fdt_fixup=;\0" \
222 MEM_LAYOUT_ENV_SETTINGS \
223 NFS_BOOTCMD \
224 SD_BOOTCMD \
225 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
226 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
227 "flash_eth.img && source ${loadaddr}\0" \
228 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
229 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
230 "source ${loadaddr}\0" \
231 "setup=setenv setupargs fec_mac=${ethaddr} " \
232 "consoleblank=0 no_console_suspend=1 console=tty1 " \
233 "console=${console},${baudrate}n8\0 " \
234 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
235 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
236 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
237 "source ${loadaddr}\0" \
238 "splashpos=m,m\0" \
239 "vidargs=mxc_hdmi.only_cea=1 " \
240 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
241 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
242 "fbmem=32M\0 "
243
244/* Miscellaneous configurable options */
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100245#undef CONFIG_SYS_CBSIZE
246#define CONFIG_SYS_CBSIZE 1024
247#undef CONFIG_SYS_MAXARGS
248#define CONFIG_SYS_MAXARGS 48
249
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100250#define CONFIG_SYS_MEMTEST_START 0x10000000
251#define CONFIG_SYS_MEMTEST_END 0x10010000
252#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
253
254#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
255
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100256/* Physical Memory Map */
257#define CONFIG_NR_DRAM_BANKS 1
258#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
259
260#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
261#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
262#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
263
264#define CONFIG_SYS_INIT_SP_OFFSET \
265 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
266#define CONFIG_SYS_INIT_SP_ADDR \
267 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
268
Masahiro Yamadae856bdc2017-02-11 22:43:54 +0900269/* environment organization */
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100270
271#define CONFIG_ENV_SIZE (8 * 1024)
272
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100273#if defined(CONFIG_ENV_IS_IN_MMC)
274/* Environment in eMMC, before config block at the end of 1st "boot sector" */
275#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
276 CONFIG_TDX_CFG_BLOCK_OFFSET)
277#define CONFIG_SYS_MMC_ENV_DEV 0
278#define CONFIG_SYS_MMC_ENV_PART 1
279#endif
280
281#define CONFIG_OF_SYSTEM_SETUP
282
283#define CONFIG_CMD_TIME
284
Max Krummenacher592f4ae2016-11-30 19:43:08 +0100285#endif /* __CONFIG_H */