blob: 1b2f6b248754284aac94b319fc866ed8a6591f98 [file] [log] [blame]
Shengzhou Liuaba80042014-11-24 17:11:55 +08001/*
2 * Copyright 2014 Freescale Semiconductor, Inc.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#include <common.h>
8#include <command.h>
9#include <i2c.h>
10#include <netdev.h>
11#include <linux/compiler.h>
12#include <asm/mmu.h>
13#include <asm/processor.h>
14#include <asm/cache.h>
15#include <asm/immap_85xx.h>
16#include <asm/fsl_law.h>
17#include <asm/fsl_serdes.h>
Shengzhou Liuaba80042014-11-24 17:11:55 +080018#include <asm/fsl_liodn.h>
19#include <fm_eth.h>
20#include <hwconfig.h>
Shengzhou Liuaba80042014-11-24 17:11:55 +080021#include "../common/qixis.h"
22#include "t102xqds.h"
23#include "t102xqds_qixis.h"
tang yuantian2c537642014-12-18 09:55:07 +080024#include "../common/sleep.h"
Shengzhou Liuaba80042014-11-24 17:11:55 +080025
26DECLARE_GLOBAL_DATA_PTR;
27
28int checkboard(void)
29{
30 char buf[64];
31 struct cpu_type *cpu = gd->arch.cpu;
32 static const char *const freq[] = {"100", "125", "156.25", "100.0"};
33 int clock;
34 u8 sw = QIXIS_READ(arch);
35
36 printf("Board: %sQDS, ", cpu->name);
37 printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
38 printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
39
40#ifdef CONFIG_SDCARD
41 puts("SD/MMC\n");
42#elif CONFIG_SPIFLASH
43 puts("SPI\n");
44#else
45 sw = QIXIS_READ(brdcfg[0]);
46 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
47
48 if (sw < 0x8)
49 printf("vBank: %d\n", sw);
50 else if (sw == 0x8)
51 puts("PromJet\n");
52 else if (sw == 0x9)
53 puts("NAND\n");
54 else if (sw == 0x15)
55 printf("IFC Card\n");
56 else
57 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
58#endif
59
60 printf("FPGA: v%d (%s), build %d",
61 (int)QIXIS_READ(scver), qixis_read_tag(buf),
62 (int)qixis_read_minor());
63 /* the timestamp string contains "\n" at the end */
64 printf(" on %s", qixis_read_time(buf));
65
66 puts("SERDES Reference: ");
67 sw = QIXIS_READ(brdcfg[2]);
68 clock = (sw >> 6) & 3;
69 printf("Clock1=%sMHz ", freq[clock]);
70 clock = (sw >> 4) & 3;
71 printf("Clock2=%sMHz\n", freq[clock]);
72
73 return 0;
74}
75
76int select_i2c_ch_pca9547(u8 ch)
77{
78 int ret;
79
80 ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
81 if (ret) {
82 puts("PCA: failed to select proper channel\n");
83 return ret;
84 }
85
86 return 0;
87}
88
89static int board_mux_lane_to_slot(void)
90{
91 ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
92 u32 srds_prtcl_s1;
93 u8 brdcfg9;
94
95 srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
96 FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
97 srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
98
99
100 brdcfg9 = QIXIS_READ(brdcfg[9]);
101 QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE);
102
103 switch (srds_prtcl_s1) {
104 case 0:
105 /* SerDes1 is not enabled */
106 break;
107 case 0xd5:
108 case 0x5b:
109 case 0x6b:
110 case 0x77:
111 case 0x6f:
112 case 0x7f:
113 QIXIS_WRITE(brdcfg[12], 0x8c);
114 break;
115 case 0x40:
116 QIXIS_WRITE(brdcfg[12], 0xfc);
117 break;
118 case 0xd6:
119 case 0x5a:
120 case 0x6a:
121 case 0x56:
122 QIXIS_WRITE(brdcfg[12], 0x88);
123 break;
124 case 0x47:
125 QIXIS_WRITE(brdcfg[12], 0xcc);
126 break;
127 case 0x46:
128 QIXIS_WRITE(brdcfg[12], 0xc8);
129 break;
130 case 0x95:
131 case 0x99:
132 brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE;
133 QIXIS_WRITE(brdcfg[9], brdcfg9);
134 QIXIS_WRITE(brdcfg[12], 0x8c);
135 break;
136 case 0x116:
137 QIXIS_WRITE(brdcfg[12], 0x00);
138 break;
139 case 0x115:
140 case 0x119:
141 case 0x129:
142 case 0x12b:
143 /* Aurora, PCIe, SGMII, SATA */
144 QIXIS_WRITE(brdcfg[12], 0x04);
145 break;
146 default:
147 printf("WARNING: unsupported for SerDes Protocol %d\n",
148 srds_prtcl_s1);
149 return -1;
150 }
151
152 return 0;
153}
154
York Sune5d5f5a2016-11-18 13:01:34 -0800155#ifdef CONFIG_ARCH_T1024
Shengzhou Liuaba80042014-11-24 17:11:55 +0800156static void board_mux_setup(void)
157{
158 u8 brdcfg15;
159
160 brdcfg15 = QIXIS_READ(brdcfg[15]);
161 brdcfg15 &= ~BRDCFG15_DIUSEL_MASK;
162
163 if (hwconfig_arg_cmp("pin_mux", "tdm")) {
164 /* Route QE_TDM multiplexed signals to TDM Riser slot */
165 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM);
166 QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2);
Shengzhou Liu355b3852014-11-24 17:11:58 +0800167 QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
168 ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM);
Shengzhou Liuaba80042014-11-24 17:11:55 +0800169 } else if (hwconfig_arg_cmp("pin_mux", "ucc")) {
170 /* to UCC (ProfiBus) interface */
171 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC);
172 } else if (hwconfig_arg_cmp("pin_mux", "hdmi")) {
173 /* to DVI (HDMI) encoder */
174 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI);
175 } else if (hwconfig_arg_cmp("pin_mux", "lcd")) {
176 /* to DFP (LCD) encoder */
177 QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM |
178 BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD);
179 }
Shengzhou Liu355b3852014-11-24 17:11:58 +0800180
181 if (hwconfig_arg_cmp("adaptor", "sdxc"))
182 /* Route SPI_CS multiplexed signals to SD slot */
183 QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
184 ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC);
Shengzhou Liuaba80042014-11-24 17:11:55 +0800185}
186#endif
187
Shengzhou Liu10227aa2014-11-24 17:18:28 +0800188void board_retimer_ds125df111_init(void)
189{
190 u8 reg;
191
192 /* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */
193 reg = I2C_MUX_CH7;
194 i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &reg, 1);
195 reg = I2C_MUX_CH5;
196 i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
197
198 /* Access to Control/Shared register */
199 reg = 0x0;
200 i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
201
202 /* Read device revision and ID */
203 i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
204 debug("Retimer version id = 0x%x\n", reg);
205
206 /* Enable Broadcast */
207 reg = 0x0c;
208 i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
209
210 /* Reset Channel Registers */
211 i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
212 reg |= 0x4;
213 i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
214
215 /* Enable override divider select and Enable Override Output Mux */
216 i2c_read(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
217 reg |= 0x24;
218 i2c_write(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
219
220 /* Select VCO Divider to full rate (000) */
221 i2c_read(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
222 reg &= 0x8f;
223 i2c_write(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
224
225 /* Select active PFD MUX input as re-timed data (001) */
226 i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
227 reg &= 0x3f;
228 reg |= 0x20;
229 i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
230
231 /* Set data rate as 10.3125 Gbps */
232 reg = 0x0;
233 i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
234 reg = 0xb2;
235 i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
236 reg = 0x90;
237 i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
238 reg = 0xb3;
239 i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
240 reg = 0xcd;
241 i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
242}
243
tang yuantian2c537642014-12-18 09:55:07 +0800244int board_early_init_f(void)
245{
246#if defined(CONFIG_DEEP_SLEEP)
247 if (is_warm_boot())
248 fsl_dp_disable_console();
249#endif
250
251 return 0;
252}
253
Shengzhou Liuaba80042014-11-24 17:11:55 +0800254int board_early_init_r(void)
255{
256#ifdef CONFIG_SYS_FLASH_BASE
257 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
258 int flash_esel = find_tlb_idx((void *)flashbase, 1);
259
260 /*
261 * Remap Boot flash + PROMJET region to caching-inhibited
262 * so that flash can be erased properly.
263 */
264
265 /* Flush d-cache and invalidate i-cache of any FLASH data */
266 flush_dcache();
267 invalidate_icache();
268
269 if (flash_esel == -1) {
270 /* very unlikely unless something is messed up */
271 puts("Error: Could not find TLB for FLASH BASE\n");
272 flash_esel = 2; /* give our best effort to continue */
273 } else {
274 /* invalidate existing TLB entry for flash + promjet */
275 disable_tlb(flash_esel);
276 }
277
278 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
279 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
280 0, flash_esel, BOOKE_PAGESZ_256M, 1);
281#endif
Shengzhou Liuaba80042014-11-24 17:11:55 +0800282 select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
283 board_mux_lane_to_slot();
Shengzhou Liu10227aa2014-11-24 17:18:28 +0800284 board_retimer_ds125df111_init();
Shengzhou Liu58186432014-11-24 17:12:00 +0800285
286 /* Increase IO drive strength to address FCS error on RGMII */
287 out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800);
288
Shengzhou Liuaba80042014-11-24 17:11:55 +0800289 return 0;
290}
291
292unsigned long get_board_sys_clk(void)
293{
294 u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
295
296 switch (sysclk_conf & 0x0F) {
297 case QIXIS_SYSCLK_64:
298 return 64000000;
299 case QIXIS_SYSCLK_83:
300 return 83333333;
301 case QIXIS_SYSCLK_100:
302 return 100000000;
303 case QIXIS_SYSCLK_125:
304 return 125000000;
305 case QIXIS_SYSCLK_133:
306 return 133333333;
307 case QIXIS_SYSCLK_150:
308 return 150000000;
309 case QIXIS_SYSCLK_160:
310 return 160000000;
311 case QIXIS_SYSCLK_166:
312 return 166666666;
313 }
314 return 66666666;
315}
316
317unsigned long get_board_ddr_clk(void)
318{
319 u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
320
321 switch ((ddrclk_conf & 0x30) >> 4) {
322 case QIXIS_DDRCLK_100:
323 return 100000000;
324 case QIXIS_DDRCLK_125:
325 return 125000000;
326 case QIXIS_DDRCLK_133:
327 return 133333333;
328 }
329 return 66666666;
330}
331
332#define NUM_SRDS_PLL 2
333int misc_init_r(void)
334{
York Sune5d5f5a2016-11-18 13:01:34 -0800335#ifdef CONFIG_ARCH_T1024
Shengzhou Liuaba80042014-11-24 17:11:55 +0800336 board_mux_setup();
337#endif
338 return 0;
339}
340
Shengzhou Liu355b3852014-11-24 17:11:58 +0800341void fdt_fixup_spi_mux(void *blob)
342{
343 int nodeoff = 0;
344
345 if (hwconfig_arg_cmp("pin_mux", "tdm")) {
346 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
347 "eon,en25s64")) >= 0) {
348 fdt_del_node(blob, nodeoff);
349 }
350 } else {
351 /* remove tdm node */
352 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
353 "maxim,ds26522")) >= 0) {
354 fdt_del_node(blob, nodeoff);
355 }
356 }
357}
358
Shengzhou Liuaba80042014-11-24 17:11:55 +0800359int ft_board_setup(void *blob, bd_t *bd)
360{
361 phys_addr_t base;
362 phys_size_t size;
363
364 ft_cpu_setup(blob, bd);
365
366 base = getenv_bootm_low();
367 size = getenv_bootm_size();
368
369 fdt_fixup_memory(blob, (u64)base, (u64)size);
370
371#ifdef CONFIG_PCI
372 pci_of_setup(blob, bd);
373#endif
374
375 fdt_fixup_liodn(blob);
376
377#ifdef CONFIG_HAS_FSL_DR_USB
Sriram Dasha5c289b2016-09-16 17:12:15 +0530378 fsl_fdt_fixup_dr_usb(blob, bd);
Shengzhou Liuaba80042014-11-24 17:11:55 +0800379#endif
380
381#ifdef CONFIG_SYS_DPAA_FMAN
382 fdt_fixup_fman_ethernet(blob);
383 fdt_fixup_board_enet(blob);
384#endif
Shengzhou Liu355b3852014-11-24 17:11:58 +0800385 fdt_fixup_spi_mux(blob);
Shengzhou Liuaba80042014-11-24 17:11:55 +0800386
387 return 0;
388}
389
390void qixis_dump_switch(void)
391{
392 int i, nr_of_cfgsw;
393
394 QIXIS_WRITE(cms[0], 0x00);
395 nr_of_cfgsw = QIXIS_READ(cms[1]);
396
397 puts("DIP switch settings dump:\n");
398 for (i = 1; i <= nr_of_cfgsw; i++) {
399 QIXIS_WRITE(cms[0], i);
400 printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
401 }
402}