blob: 28d41e29254a27acc3d6bb5f74d5a51502d17bca [file] [log] [blame]
wdenk2d5b5612003-10-14 19:43:55 +00001/*
2 * (C) Copyright 2003
3 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
4 *
5 * Configuation settings for the IXDP425 board.
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#ifndef __CONFIG_H
27#define __CONFIG_H
28
29/*
30 * High Level Configuration Options
31 * (easy to change)
32 */
33#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
34#define CONFIG_IXDP425 1 /* on an IXDP425 Board */
35
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020036#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
37#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
38
wdenk2d5b5612003-10-14 19:43:55 +000039/***************************************************************
40 * U-boot generic defines start here.
41 ***************************************************************/
42
wdenk2d5b5612003-10-14 19:43:55 +000043#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
44
45/*
46 * Size of malloc() pool
47 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020048#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
wdenk2d5b5612003-10-14 19:43:55 +000049
50/* allow to overwrite serial and ethaddr */
51#define CONFIG_ENV_OVERWRITE
52
53#define CONFIG_BAUDRATE 115200
54
Jon Loeliger1d2c6bc2007-07-04 22:32:32 -050055
56/*
Jon Loeliger7f5c0152007-07-10 09:38:02 -050057 * BOOTP options
58 */
59#define CONFIG_BOOTP_BOOTFILESIZE
60#define CONFIG_BOOTP_BOOTPATH
61#define CONFIG_BOOTP_GATEWAY
62#define CONFIG_BOOTP_HOSTNAME
63
64
65/*
Jon Loeliger1d2c6bc2007-07-04 22:32:32 -050066 * Command line configuration.
67 */
68#include <config_cmd_default.h>
69
70#define CONFIG_CMD_ELF
71#define CONFIG_CMD_PCI
72
wdenk2d5b5612003-10-14 19:43:55 +000073
wdenka1191902005-01-09 17:12:27 +000074#define CONFIG_PCI
Jean-Christophe PLAGNIOL-VILLARD8cb79b52009-01-31 08:56:49 +010075#define CONFIG_IXP_PCI
wdenka1191902005-01-09 17:12:27 +000076#define CONFIG_NET_MULTI
77#define CONFIG_EEPRO100
wdenk2d5b5612003-10-14 19:43:55 +000078
79#define CONFIG_BOOTDELAY 3
wdenka1191902005-01-09 17:12:27 +000080/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b*/
81#define CONFIG_NETMASK 255.255.255.0
wdenk2d5b5612003-10-14 19:43:55 +000082#define CONFIG_IPADDR 192.168.0.21
wdenka1191902005-01-09 17:12:27 +000083#define CONFIG_SERVERIP 192.168.0.148
wdenk2d5b5612003-10-14 19:43:55 +000084#define CONFIG_BOOTCOMMAND "bootm 50040000"
85#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
wdenk42d1f032003-10-15 23:53:47 +000086#define CONFIG_CMDLINE_TAG
wdenk2d5b5612003-10-14 19:43:55 +000087
Jon Loeliger1d2c6bc2007-07-04 22:32:32 -050088#if defined(CONFIG_CMD_KGDB)
wdenk2d5b5612003-10-14 19:43:55 +000089#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
90#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
91#endif
92
93/*
94 * Miscellaneous configurable options
95 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020096#define CONFIG_SYS_LONGHELP /* undef to save memory */
97#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
98#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
99#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
100#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
101#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk2d5b5612003-10-14 19:43:55 +0000102
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
104#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
wdenk2d5b5612003-10-14 19:43:55 +0000105
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
wdenk2d5b5612003-10-14 19:43:55 +0000107
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200108#define CONFIG_SYS_HZ 3333333 /* spec says 66.666 MHz, but it appears to be 33 */
wdenk42d1f032003-10-15 23:53:47 +0000109 /* valid baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200110#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenk2d5b5612003-10-14 19:43:55 +0000111
112/*
113 * Stack sizes
114 *
115 * The stack sizes are set up in start.S using the settings below
116 */
117#define CONFIG_STACKSIZE (128*1024) /* regular stack */
118#ifdef CONFIG_USE_IRQ
119#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
120#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
121#endif
122
123/***************************************************************
124 * Platform/Board specific defines start here.
125 ***************************************************************/
126
127/*
128 * Hardware drivers
129 */
130
131
132/*
133 * select serial console configuration
134 */
Jean-Christophe PLAGNIOL-VILLARD930590f2009-01-31 09:10:48 +0100135#define CONFIG_IXP_SERIAL
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
wdenk2d5b5612003-10-14 19:43:55 +0000137
138/*
139 * Physical Memory Map
140 */
141#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
142#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
143#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
144
145#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
146#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
147#define PHYS_FLASH_BANK_SIZE 0x00800000 /* 8 MB Banks */
148#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
149
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_DRAM_BASE 0x00000000
151#define CONFIG_SYS_DRAM_SIZE 0x01000000
wdenk2d5b5612003-10-14 19:43:55 +0000152
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
154#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
155#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
wdenk2d5b5612003-10-14 19:43:55 +0000156
157/*
158 * Expansion bus settings
159 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_EXP_CS0 0xbcd23c42
wdenk2d5b5612003-10-14 19:43:55 +0000161
162/*
163 * SDRAM settings
164 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200165#define CONFIG_SYS_SDR_CONFIG 0xd
166#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
167#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
wdenk2d5b5612003-10-14 19:43:55 +0000168
169/*
170 * GPIO settings
171 */
172
173/*
174 * FLASH and environment organization
175 */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200176/*
177 * FLASH and environment organization
178 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200179#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
180#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
wdenk2d5b5612003-10-14 19:43:55 +0000181
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200182#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200183#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200184#define CONFIG_ENV_IS_IN_FLASH 1
wdenk2d5b5612003-10-14 19:43:55 +0000185
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200186#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200187
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200188#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200189
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200190#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
191#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200192
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200193#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200194
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200195#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
196#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000)
197#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
wdenk2d5b5612003-10-14 19:43:55 +0000198
199#endif /* __CONFIG_H */