blob: 12b6d24058c169013f126f58edd3f8213059cf91 [file] [log] [blame]
Mike Frysinger9171fc82008-03-30 15:46:13 -04001/*
2 * U-boot - string.c Contains library routines.
3 *
Mike Frysingerd31eb382008-08-07 15:30:49 -04004 * Copyright (c) 2005-2008 Analog Devices Inc.
Mike Frysinger9171fc82008-03-30 15:46:13 -04005 *
6 * (C) Copyright 2000-2004
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
25 * MA 02110-1301 USA
26 */
27
28#include <common.h>
29#include <config.h>
30#include <asm/blackfin.h>
31#include <asm/io.h>
32#include <asm/mach-common/bits/dma.h>
33
34char *strcpy(char *dest, const char *src)
35{
36 char *xdest = dest;
37 char temp = 0;
38
39 __asm__ __volatile__ (
40 "1:\t%2 = B [%1++] (Z);\n\t"
41 "B [%0++] = %2;\n\t"
42 "CC = %2;\n\t"
43 "if cc jump 1b (bp);\n"
44 : "=a"(dest), "=a"(src), "=d"(temp)
45 : "0"(dest), "1"(src), "2"(temp)
46 : "memory");
47
48 return xdest;
49}
50
51char *strncpy(char *dest, const char *src, size_t n)
52{
53 char *xdest = dest;
54 char temp = 0;
55
56 if (n == 0)
57 return xdest;
58
59 __asm__ __volatile__ (
60 "1:\t%3 = B [%1++] (Z);\n\t"
61 "B [%0++] = %3;\n\t"
62 "CC = %3;\n\t"
63 "if ! cc jump 2f;\n\t"
64 "%2 += -1;\n\t"
65 "CC = %2 == 0;\n\t"
66 "if ! cc jump 1b (bp);\n"
67 "2:\n"
68 : "=a"(dest), "=a"(src), "=da"(n), "=d"(temp)
69 : "0"(dest), "1"(src), "2"(n), "3"(temp)
70 : "memory");
71
72 return xdest;
73}
74
75int strcmp(const char *cs, const char *ct)
76{
77 char __res1, __res2;
78
79 __asm__ (
80 "1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */
81 "%3 = B[%1++] (Z);\n\t" /* get *ct */
82 "CC = %2 == %3;\n\t" /* compare a byte */
83 "if ! cc jump 2f;\n\t" /* not equal, break out */
84 "CC = %2;\n\t" /* at end of cs? */
85 "if cc jump 1b (bp);\n\t" /* no, keep going */
86 "jump.s 3f;\n" /* strings are equal */
87 "2:\t%2 = %2 - %3;\n" /* *cs - *ct */
88 "3:\n"
89 : "=a"(cs), "=a"(ct), "=d"(__res1), "=d"(__res2)
90 : "0"(cs), "1"(ct));
91
92 return __res1;
93}
94
95int strncmp(const char *cs, const char *ct, size_t count)
96{
97 char __res1, __res2;
98
99 if (!count)
100 return 0;
101
102 __asm__(
103 "1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */
104 "%4 = B[%1++] (Z);\n\t" /* get *ct */
105 "CC = %3 == %4;\n\t" /* compare a byte */
106 "if ! cc jump 3f;\n\t" /* not equal, break out */
107 "CC = %3;\n\t" /* at end of cs? */
108 "if ! cc jump 4f;\n\t" /* yes, all done */
109 "%2 += -1;\n\t" /* no, adjust count */
110 "CC = %2 == 0;\n\t" "if ! cc jump 1b;\n" /* more to do, keep going */
111 "2:\t%3 = 0;\n\t" /* strings are equal */
112 "jump.s 4f;\n" "3:\t%3 = %3 - %4;\n" /* *cs - *ct */
113 "4:"
114 : "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), "=d"(__res2)
115 : "0"(cs), "1"(ct), "2"(count));
116
117 return __res1;
118}
119
120#ifdef bfin_write_MDMA1_D0_IRQ_STATUS
121# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS
122# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR
123# define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA1_D0_X_COUNT
124# define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA1_D0_X_MODIFY
125# define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA1_D0_CONFIG
126# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR
127# define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA1_S0_X_COUNT
128# define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA1_S0_X_MODIFY
129# define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA1_S0_CONFIG
130# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS
131# define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA1_D0_IRQ_STATUS
132#endif
Mike Frysingerd31eb382008-08-07 15:30:49 -0400133/* This version misbehaves for count values of 0 and 2^16+.
134 * Perhaps we should detect that ? Nowhere do we actually
135 * use dma memcpy for those types of lengths though ...
136 */
Mike Frysinger21d63132008-08-07 15:31:13 -0400137void dma_memcpy_nocache(void *dst, const void *src, size_t count)
Mike Frysinger9171fc82008-03-30 15:46:13 -0400138{
Mike Frysinger961954e2008-11-05 12:45:24 -0500139 uint16_t wdsize, mod;
140
Mike Frysingere347c092008-11-05 07:20:37 -0500141 /* Disable DMA in case it's still running (older u-boot's did not
142 * always turn them off). Do it before the if statement below so
143 * we can be cheap and not do a SSYNC() due to the forced abort.
144 */
145 bfin_write_MDMA_D0_CONFIG(0);
146 bfin_write_MDMA_S0_CONFIG(0);
147 bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR);
148
Mike Frysingerd31eb382008-08-07 15:30:49 -0400149 /* Scratchpad cannot be a DMA source or destination */
150 if (((unsigned long)src >= L1_SRAM_SCRATCH &&
151 (unsigned long)src < L1_SRAM_SCRATCH_END) ||
152 ((unsigned long)dst >= L1_SRAM_SCRATCH &&
153 (unsigned long)dst < L1_SRAM_SCRATCH_END))
154 hang();
155
Mike Frysinger961954e2008-11-05 12:45:24 -0500156 if (((unsigned long)dst | (unsigned long)src | count) & 0x1) {
157 wdsize = WDSIZE_8;
158 mod = 1;
159 } else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) {
160 wdsize = WDSIZE_16;
161 count >>= 1;
162 mod = 2;
163 } else {
164 wdsize = WDSIZE_32;
165 count >>= 2;
166 mod = 4;
167 }
168
Mike Frysinger9171fc82008-03-30 15:46:13 -0400169 /* Copy sram functions from sdram to sram */
170 /* Setup destination start address */
171 bfin_write_MDMA_D0_START_ADDR(dst);
172 /* Setup destination xcount */
173 bfin_write_MDMA_D0_X_COUNT(count);
174 /* Setup destination xmodify */
Mike Frysinger961954e2008-11-05 12:45:24 -0500175 bfin_write_MDMA_D0_X_MODIFY(mod);
Mike Frysinger9171fc82008-03-30 15:46:13 -0400176
177 /* Setup Source start address */
178 bfin_write_MDMA_S0_START_ADDR(src);
179 /* Setup Source xcount */
180 bfin_write_MDMA_S0_X_COUNT(count);
181 /* Setup Source xmodify */
Mike Frysinger961954e2008-11-05 12:45:24 -0500182 bfin_write_MDMA_S0_X_MODIFY(mod);
Mike Frysinger9171fc82008-03-30 15:46:13 -0400183
184 /* Enable source DMA */
Mike Frysinger961954e2008-11-05 12:45:24 -0500185 bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN);
186 bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN);
Mike Frysinger21d63132008-08-07 15:31:13 -0400187 SSYNC();
Mike Frysinger9171fc82008-03-30 15:46:13 -0400188
Mike Frysingere347c092008-11-05 07:20:37 -0500189 while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
Mike Frysinger21d63132008-08-07 15:31:13 -0400190 continue;
191
Mike Frysingere347c092008-11-05 07:20:37 -0500192 bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR);
Mike Frysinger21d63132008-08-07 15:31:13 -0400193 bfin_write_MDMA_D0_CONFIG(0);
194 bfin_write_MDMA_S0_CONFIG(0);
195}
Mike Frysinger05b75e42008-10-06 03:35:44 -0400196/* We should do a dcache invalidate on the destination after the dma, but since
197 * we lack such hardware capability, we'll flush/invalidate the destination
198 * before the dma and bank on the idea that u-boot is single threaded.
199 */
Mike Frysinger21d63132008-08-07 15:31:13 -0400200void *dma_memcpy(void *dst, const void *src, size_t count)
201{
Mike Frysinger05b75e42008-10-06 03:35:44 -0400202 if (dcache_status()) {
Mike Frysinger21d63132008-08-07 15:31:13 -0400203 blackfin_dcache_flush_range(src, src + count);
Mike Frysinger05b75e42008-10-06 03:35:44 -0400204 blackfin_dcache_flush_invalidate_range(dst, dst + count);
205 }
Mike Frysinger21d63132008-08-07 15:31:13 -0400206
207 dma_memcpy_nocache(dst, src, count);
Mike Frysinger9171fc82008-03-30 15:46:13 -0400208
209 if (icache_status())
210 blackfin_icache_flush_range(dst, dst + count);
211
Mike Frysinger9171fc82008-03-30 15:46:13 -0400212 return dst;
213}
214
215/*
216 * memcpy - Copy one area of memory to another
217 * @dest: Where to copy to
218 * @src: Where to copy from
219 * @count: The size of the area.
220 *
221 * We need to have this wrapper in memcpy() as common code may call memcpy()
222 * to load up L1 regions. Consider loading an ELF which has sections with
223 * LMA's pointing to L1. The common code ELF loader will simply use memcpy()
224 * to move the ELF's sections into the right place. We need to catch that
225 * here and redirect to dma_memcpy().
226 */
227extern void *memcpy_ASM(void *dst, const void *src, size_t count);
228void *memcpy(void *dst, const void *src, size_t count)
229{
230 if (!count)
231 return dst;
232
233 if (addr_bfin_on_chip_mem(dst)) {
234 /* L1 is the destination */
235 return dma_memcpy(dst, src, count);
236
237 } else if (addr_bfin_on_chip_mem(src)) {
238 /* L1 is the source */
239 return dma_memcpy(dst, src, count);
240
241 } else
242 /* No L1 is involved, so just call regular memcpy */
243 return memcpy_ASM(dst, src, count);
244}