Jagan Teki | 1494cc8 | 2018-05-07 11:21:34 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2018 BTicino |
| 4 | * Copyright (C) 2018 Amarula Solutions B.V. |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | #include "imx6dl.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "BTicino i.MX6DL Mamoj board"; |
| 14 | compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; |
| 15 | }; |
| 16 | |
| 17 | &fec { |
| 18 | pinctrl-names = "default"; |
| 19 | pinctrl-0 = <&pinctrl_enet>; |
| 20 | phy-mode = "mii"; |
| 21 | status = "okay"; |
| 22 | }; |
| 23 | |
Jagan Teki | dda9892 | 2018-05-07 11:21:35 +0530 | [diff] [blame] | 24 | &i2c3 { |
| 25 | clock-frequency = <400000>; |
| 26 | pinctrl-names = "default"; |
| 27 | pinctrl-0 = <&pinctrl_i2c3>; |
| 28 | status = "okay"; |
| 29 | }; |
| 30 | |
| 31 | &i2c4 { |
| 32 | clock-frequency = <100000>; |
| 33 | pinctrl-names = "default"; |
| 34 | pinctrl-0 = <&pinctrl_i2c4>; |
| 35 | status = "okay"; |
Jagan Teki | e810565 | 2018-05-07 11:21:36 +0530 | [diff] [blame^] | 36 | |
| 37 | pmic: pfuze100@08 { |
| 38 | compatible = "fsl,pfuze100"; |
| 39 | reg = <0x08>; |
| 40 | |
| 41 | regulators { |
| 42 | /* CPU vdd_arm core */ |
| 43 | sw1a_reg: sw1ab { |
| 44 | regulator-min-microvolt = <300000>; |
| 45 | regulator-max-microvolt = <1875000>; |
| 46 | regulator-boot-on; |
| 47 | regulator-always-on; |
| 48 | regulator-ramp-delay = <6250>; |
| 49 | }; |
| 50 | |
| 51 | /* SOC vdd_soc */ |
| 52 | sw1c_reg: sw1c { |
| 53 | regulator-min-microvolt = <300000>; |
| 54 | regulator-max-microvolt = <1875000>; |
| 55 | regulator-boot-on; |
| 56 | regulator-always-on; |
| 57 | regulator-ramp-delay = <6250>; |
| 58 | }; |
| 59 | |
| 60 | /* I/O power GEN_3V3 */ |
| 61 | sw2_reg: sw2 { |
| 62 | regulator-min-microvolt = <800000>; |
| 63 | regulator-max-microvolt = <3300000>; |
| 64 | regulator-boot-on; |
| 65 | regulator-always-on; |
| 66 | }; |
| 67 | |
| 68 | /* DDR memory */ |
| 69 | sw3a_reg: sw3a { |
| 70 | regulator-min-microvolt = <400000>; |
| 71 | regulator-max-microvolt = <1975000>; |
| 72 | regulator-boot-on; |
| 73 | regulator-always-on; |
| 74 | }; |
| 75 | |
| 76 | /* DDR memory */ |
| 77 | sw3b_reg: sw3b { |
| 78 | regulator-min-microvolt = <400000>; |
| 79 | regulator-max-microvolt = <1975000>; |
| 80 | regulator-boot-on; |
| 81 | regulator-always-on; |
| 82 | }; |
| 83 | |
| 84 | /* not used */ |
| 85 | sw4_reg: sw4 { |
| 86 | regulator-min-microvolt = <800000>; |
| 87 | regulator-max-microvolt = <3300000>; |
| 88 | }; |
| 89 | |
| 90 | /* not used */ |
| 91 | swbst_reg: swbst { |
| 92 | regulator-min-microvolt = <5000000>; |
| 93 | regulator-max-microvolt = <5150000>; |
| 94 | }; |
| 95 | |
| 96 | /* PMIC vsnvs. EX boot mode */ |
| 97 | snvs_reg: vsnvs { |
| 98 | regulator-min-microvolt = <1000000>; |
| 99 | regulator-max-microvolt = <3000000>; |
| 100 | regulator-boot-on; |
| 101 | regulator-always-on; |
| 102 | }; |
| 103 | |
| 104 | vref_reg: vrefddr { |
| 105 | regulator-boot-on; |
| 106 | regulator-always-on; |
| 107 | }; |
| 108 | |
| 109 | /* not used */ |
| 110 | vgen1_reg: vgen1 { |
| 111 | regulator-min-microvolt = <800000>; |
| 112 | regulator-max-microvolt = <1550000>; |
| 113 | }; |
| 114 | |
| 115 | /* not used */ |
| 116 | vgen2_reg: vgen2 { |
| 117 | regulator-min-microvolt = <800000>; |
| 118 | regulator-max-microvolt = <1550000>; |
| 119 | }; |
| 120 | |
| 121 | /* not used */ |
| 122 | vgen3_reg: vgen3 { |
| 123 | regulator-min-microvolt = <1800000>; |
| 124 | regulator-max-microvolt = <3300000>; |
| 125 | }; |
| 126 | |
| 127 | /* 1v8 general power */ |
| 128 | vgen4_reg: vgen4 { |
| 129 | regulator-min-microvolt = <1800000>; |
| 130 | regulator-max-microvolt = <3300000>; |
| 131 | regulator-always-on; |
| 132 | }; |
| 133 | |
| 134 | /* 2v8 general power IMX6 */ |
| 135 | vgen5_reg: vgen5 { |
| 136 | regulator-min-microvolt = <1800000>; |
| 137 | regulator-max-microvolt = <3300000>; |
| 138 | regulator-always-on; |
| 139 | }; |
| 140 | |
| 141 | /* 3v3 Ethernet */ |
| 142 | vgen6_reg: vgen6 { |
| 143 | regulator-min-microvolt = <1800000>; |
| 144 | regulator-max-microvolt = <3300000>; |
| 145 | regulator-always-on; |
| 146 | }; |
| 147 | }; |
| 148 | }; |
Jagan Teki | dda9892 | 2018-05-07 11:21:35 +0530 | [diff] [blame] | 149 | }; |
| 150 | |
Jagan Teki | 1494cc8 | 2018-05-07 11:21:34 +0530 | [diff] [blame] | 151 | &uart3 { |
| 152 | pinctrl-names = "default"; |
| 153 | pinctrl-0 = <&pinctrl_uart3>; |
| 154 | status = "okay"; |
| 155 | }; |
| 156 | |
| 157 | &usdhc3 { |
| 158 | pinctrl-names = "default"; |
| 159 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 160 | bus-width = <8>; |
| 161 | non-removable; |
| 162 | keep-power-in-suspend; |
| 163 | status = "okay"; |
| 164 | }; |
| 165 | |
| 166 | &iomuxc { |
| 167 | pinctrl_enet: enetgrp { |
| 168 | fsl,pins = < |
| 169 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| 170 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 171 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1 |
| 172 | MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 |
| 173 | MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 |
| 174 | MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0 |
| 175 | MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0 |
| 176 | MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 |
| 177 | MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0 |
| 178 | MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1 |
| 179 | MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 |
| 180 | MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 |
| 181 | MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0 |
| 182 | MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0 |
| 183 | MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 |
| 184 | MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 |
| 185 | MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0 |
| 186 | MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0 |
| 187 | >; |
| 188 | }; |
| 189 | |
Jagan Teki | dda9892 | 2018-05-07 11:21:35 +0530 | [diff] [blame] | 190 | pinctrl_i2c3: i2c3grp { |
| 191 | fsl,pins = < |
| 192 | MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| 193 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| 194 | >; |
| 195 | }; |
| 196 | |
| 197 | pinctrl_i2c4: i2c4grp { |
| 198 | fsl,pins = < |
| 199 | MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 |
| 200 | MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 |
| 201 | >; |
| 202 | }; |
| 203 | |
Jagan Teki | 1494cc8 | 2018-05-07 11:21:34 +0530 | [diff] [blame] | 204 | pinctrl_uart3: uart3grp { |
| 205 | fsl,pins = < |
| 206 | MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| 207 | MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| 208 | >; |
| 209 | }; |
| 210 | |
| 211 | pinctrl_usdhc3: usdhc3grp { |
| 212 | fsl,pins = < |
| 213 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| 214 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| 215 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| 216 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| 217 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| 218 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| 219 | MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| 220 | MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| 221 | MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| 222 | MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| 223 | >; |
| 224 | }; |
| 225 | }; |