Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * Configuration settings for the Freescale i.MX7D SABRESD board. |
| 5 | * |
| 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7 | */ |
| 8 | |
| 9 | #ifndef __MX7D_SABRESD_CONFIG_H |
| 10 | #define __MX7D_SABRESD_CONFIG_H |
| 11 | |
| 12 | #include "mx7_common.h" |
| 13 | |
| 14 | #define CONFIG_DBG_MONITOR |
| 15 | #define PHYS_SDRAM_SIZE SZ_1G |
| 16 | |
Fabio Estevam | 5d69269 | 2016-02-22 18:41:48 -0300 | [diff] [blame] | 17 | #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR |
| 18 | |
Fabio Estevam | 6baa261 | 2016-03-26 13:30:49 -0300 | [diff] [blame] | 19 | /* Size of malloc() pool */ |
| 20 | #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) |
| 21 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 22 | /* Network */ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 23 | #define CONFIG_FEC_MXC |
| 24 | #define CONFIG_MII |
| 25 | #define CONFIG_FEC_XCV_TYPE RGMII |
| 26 | #define CONFIG_ETHPRIME "FEC" |
| 27 | #define CONFIG_FEC_MXC_PHYADDR 0 |
| 28 | |
| 29 | #define CONFIG_PHYLIB |
| 30 | #define CONFIG_PHY_BROADCOM |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 31 | /* ENET1 */ |
| 32 | #define IMX_FEC_BASE ENET_IPS_BASE_ADDR |
| 33 | |
| 34 | /* MMC Config*/ |
| 35 | #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| 36 | |
| 37 | /* PMIC */ |
| 38 | #define CONFIG_POWER |
| 39 | #define CONFIG_POWER_I2C |
| 40 | #define CONFIG_POWER_PFUZE3000 |
| 41 | #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 |
| 42 | |
| 43 | #undef CONFIG_BOOTM_NETBSD |
| 44 | #undef CONFIG_BOOTM_PLAN9 |
| 45 | #undef CONFIG_BOOTM_RTEMS |
| 46 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 47 | /* I2C configs */ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 48 | #define CONFIG_SYS_I2C |
| 49 | #define CONFIG_SYS_I2C_MXC |
Albert ARIBAUD \\(3ADEV\\) | 03544c6 | 2015-09-21 22:43:38 +0200 | [diff] [blame] | 50 | #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 51 | #define CONFIG_SYS_I2C_SPEED 100000 |
| 52 | |
| 53 | #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ |
| 54 | #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 |
| 55 | |
Peng Fan | 79e355f | 2016-01-28 16:55:08 +0800 | [diff] [blame] | 56 | #ifdef CONFIG_IMX_BOOTAUX |
| 57 | /* Set to QSPI1 A flash at default */ |
| 58 | #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 |
Peng Fan | 79e355f | 2016-01-28 16:55:08 +0800 | [diff] [blame] | 59 | |
| 60 | #define UPDATE_M4_ENV \ |
| 61 | "m4image=m4_qspi.bin\0" \ |
| 62 | "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \ |
| 63 | "update_m4_from_sd=" \ |
| 64 | "if sf probe 0:0; then " \ |
| 65 | "if run loadm4image; then " \ |
| 66 | "setexpr fw_sz ${filesize} + 0xffff; " \ |
| 67 | "setexpr fw_sz ${fw_sz} / 0x10000; " \ |
| 68 | "setexpr fw_sz ${fw_sz} * 0x10000; " \ |
| 69 | "sf erase 0x0 ${fw_sz}; " \ |
| 70 | "sf write ${loadaddr} 0x0 ${filesize}; " \ |
| 71 | "fi; " \ |
| 72 | "fi\0" \ |
| 73 | "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0" |
| 74 | #else |
| 75 | #define UPDATE_M4_ENV "" |
| 76 | #endif |
| 77 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 78 | #define CONFIG_MFG_ENV_SETTINGS \ |
| 79 | "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ |
| 80 | "rdinit=/linuxrc " \ |
| 81 | "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ |
| 82 | "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ |
| 83 | "g_mass_storage.iSerialNumber=\"\" "\ |
| 84 | "clk_ignore_unused "\ |
| 85 | "\0" \ |
| 86 | "initrd_addr=0x83800000\0" \ |
| 87 | "initrd_high=0xffffffff\0" \ |
| 88 | "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ |
| 89 | |
Tzu-Jung Lee | 73f1b80 | 2015-10-27 23:00:50 +0000 | [diff] [blame] | 90 | #define CONFIG_DFU_ENV_SETTINGS \ |
| 91 | "dfu_alt_info=image raw 0 0x800000;"\ |
| 92 | "u-boot raw 0 0x4000;"\ |
| 93 | "bootimg part 0 1;"\ |
| 94 | "rootfs part 0 2\0" \ |
| 95 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 96 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
Peng Fan | 79e355f | 2016-01-28 16:55:08 +0800 | [diff] [blame] | 97 | UPDATE_M4_ENV \ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 98 | CONFIG_MFG_ENV_SETTINGS \ |
Tzu-Jung Lee | 73f1b80 | 2015-10-27 23:00:50 +0000 | [diff] [blame] | 99 | CONFIG_DFU_ENV_SETTINGS \ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 100 | "script=boot.scr\0" \ |
| 101 | "image=zImage\0" \ |
| 102 | "console=ttymxc0\0" \ |
| 103 | "fdt_high=0xffffffff\0" \ |
| 104 | "initrd_high=0xffffffff\0" \ |
| 105 | "fdt_file=imx7d-sdb.dtb\0" \ |
| 106 | "fdt_addr=0x83000000\0" \ |
| 107 | "boot_fdt=try\0" \ |
| 108 | "ip_dyn=yes\0" \ |
Peng Fan | ebe517b | 2015-10-29 15:54:53 +0800 | [diff] [blame] | 109 | "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 110 | "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ |
| 111 | "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ |
| 112 | "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ |
| 113 | "mmcautodetect=yes\0" \ |
| 114 | "mmcargs=setenv bootargs console=${console},${baudrate} " \ |
| 115 | "root=${mmcroot}\0" \ |
| 116 | "loadbootscript=" \ |
| 117 | "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ |
| 118 | "bootscript=echo Running bootscript from mmc ...; " \ |
| 119 | "source\0" \ |
| 120 | "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ |
| 121 | "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ |
| 122 | "mmcboot=echo Booting from mmc ...; " \ |
| 123 | "run mmcargs; " \ |
| 124 | "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ |
| 125 | "if run loadfdt; then " \ |
| 126 | "bootz ${loadaddr} - ${fdt_addr}; " \ |
| 127 | "else " \ |
| 128 | "if test ${boot_fdt} = try; then " \ |
| 129 | "bootz; " \ |
| 130 | "else " \ |
| 131 | "echo WARN: Cannot load the DT; " \ |
| 132 | "fi; " \ |
| 133 | "fi; " \ |
| 134 | "else " \ |
| 135 | "bootz; " \ |
| 136 | "fi;\0" \ |
| 137 | "netargs=setenv bootargs console=${console},${baudrate} " \ |
| 138 | "root=/dev/nfs " \ |
| 139 | "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ |
| 140 | "netboot=echo Booting from net ...; " \ |
| 141 | "run netargs; " \ |
| 142 | "if test ${ip_dyn} = yes; then " \ |
| 143 | "setenv get_cmd dhcp; " \ |
| 144 | "else " \ |
| 145 | "setenv get_cmd tftp; " \ |
| 146 | "fi; " \ |
| 147 | "${get_cmd} ${image}; " \ |
| 148 | "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ |
| 149 | "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ |
| 150 | "bootz ${loadaddr} - ${fdt_addr}; " \ |
| 151 | "else " \ |
| 152 | "if test ${boot_fdt} = try; then " \ |
| 153 | "bootz; " \ |
| 154 | "else " \ |
| 155 | "echo WARN: Cannot load the DT; " \ |
| 156 | "fi; " \ |
| 157 | "fi; " \ |
| 158 | "else " \ |
| 159 | "bootz; " \ |
| 160 | "fi;\0" |
| 161 | |
| 162 | #define CONFIG_BOOTCOMMAND \ |
| 163 | "mmc dev ${mmcdev};" \ |
| 164 | "mmc dev ${mmcdev}; if mmc rescan; then " \ |
| 165 | "if run loadbootscript; then " \ |
| 166 | "run bootscript; " \ |
| 167 | "else " \ |
| 168 | "if run loadimage; then " \ |
| 169 | "run mmcboot; " \ |
| 170 | "else run netboot; " \ |
| 171 | "fi; " \ |
| 172 | "fi; " \ |
| 173 | "else run netboot; fi" |
| 174 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 175 | #define CONFIG_SYS_MEMTEST_START 0x80000000 |
| 176 | #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) |
| 177 | |
| 178 | #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| 179 | #define CONFIG_SYS_HZ 1000 |
| 180 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 181 | /* Physical Memory Map */ |
| 182 | #define CONFIG_NR_DRAM_BANKS 1 |
| 183 | #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| 184 | |
| 185 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| 186 | #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| 187 | #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| 188 | |
| 189 | #define CONFIG_SYS_INIT_SP_OFFSET \ |
| 190 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| 191 | #define CONFIG_SYS_INIT_SP_ADDR \ |
| 192 | (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| 193 | |
Masahiro Yamada | e856bdc | 2017-02-11 22:43:54 +0900 | [diff] [blame] | 194 | /* environment organization */ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 195 | #define CONFIG_ENV_SIZE SZ_8K |
| 196 | #define CONFIG_ENV_IS_IN_MMC |
Peng Fan | 6e1a41c | 2015-12-22 17:04:24 +0800 | [diff] [blame] | 197 | |
Angus Ainslie | 9cd37b0 | 2016-11-11 11:31:39 -0700 | [diff] [blame] | 198 | /* MXC SPI driver support */ |
| 199 | #define CONFIG_MXC_SPI |
| 200 | |
Peng Fan | 6e1a41c | 2015-12-22 17:04:24 +0800 | [diff] [blame] | 201 | /* |
| 202 | * If want to use nand, define CONFIG_NAND_MXS and rework board |
| 203 | * to support nand, since emmc has pin conflicts with nand |
| 204 | */ |
| 205 | #ifdef CONFIG_NAND_MXS |
| 206 | #define CONFIG_CMD_NAND |
| 207 | #define CONFIG_CMD_NAND_TRIMFFS |
| 208 | |
| 209 | /* NAND stuff */ |
| 210 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| 211 | #define CONFIG_SYS_NAND_BASE 0x40000000 |
| 212 | #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
| 213 | #define CONFIG_SYS_NAND_ONFI_DETECTION |
| 214 | |
| 215 | /* DMA stuff, needed for GPMI/MXS NAND support */ |
| 216 | #define CONFIG_APBH_DMA |
| 217 | #define CONFIG_APBH_DMA_BURST |
| 218 | #define CONFIG_APBH_DMA_BURST8 |
| 219 | #endif |
| 220 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 221 | #define CONFIG_ENV_OFFSET (8 * SZ_64K) |
Peng Fan | 6e1a41c | 2015-12-22 17:04:24 +0800 | [diff] [blame] | 222 | #ifdef CONFIG_NAND_MXS |
| 223 | #define CONFIG_SYS_FSL_USDHC_NUM 1 |
| 224 | #else |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 225 | #define CONFIG_SYS_FSL_USDHC_NUM 2 |
Peng Fan | 6e1a41c | 2015-12-22 17:04:24 +0800 | [diff] [blame] | 226 | #endif |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 227 | |
| 228 | #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ |
| 229 | #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ |
| 230 | #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ |
| 231 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 232 | /* USB Configs */ |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 233 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| 234 | #define CONFIG_USB_HOST_ETHER |
| 235 | #define CONFIG_USB_ETHER_ASIX |
| 236 | #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| 237 | #define CONFIG_MXC_USB_FLAGS 0 |
| 238 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
| 239 | |
| 240 | #define CONFIG_IMX_THERMAL |
| 241 | |
Tzu-Jung Lee | 73f1b80 | 2015-10-27 23:00:50 +0000 | [diff] [blame] | 242 | #define CONFIG_USBD_HS |
Tzu-Jung Lee | 73f1b80 | 2015-10-27 23:00:50 +0000 | [diff] [blame] | 243 | |
Tzu-Jung Lee | 73f1b80 | 2015-10-27 23:00:50 +0000 | [diff] [blame] | 244 | #define CONFIG_USB_FUNCTION_MASS_STORAGE |
Tzu-Jung Lee | 73f1b80 | 2015-10-27 23:00:50 +0000 | [diff] [blame] | 245 | |
Peng Fan | ebe517b | 2015-10-29 15:54:53 +0800 | [diff] [blame] | 246 | #ifdef CONFIG_VIDEO |
Peng Fan | ebe517b | 2015-10-29 15:54:53 +0800 | [diff] [blame] | 247 | #define CONFIG_VIDEO_MXS |
| 248 | #define CONFIG_VIDEO_LOGO |
Peng Fan | ebe517b | 2015-10-29 15:54:53 +0800 | [diff] [blame] | 249 | #define CONFIG_SPLASH_SCREEN |
| 250 | #define CONFIG_SPLASH_SCREEN_ALIGN |
Peng Fan | ebe517b | 2015-10-29 15:54:53 +0800 | [diff] [blame] | 251 | #define CONFIG_BMP_16BPP |
| 252 | #define CONFIG_VIDEO_BMP_RLE8 |
| 253 | #define CONFIG_VIDEO_BMP_LOGO |
| 254 | #endif |
| 255 | |
Peng Fan | 53cc647 | 2015-11-30 17:45:02 +0800 | [diff] [blame] | 256 | #ifdef CONFIG_FSL_QSPI |
Peng Fan | 53cc647 | 2015-11-30 17:45:02 +0800 | [diff] [blame] | 257 | #define CONFIG_SPI_FLASH |
| 258 | #define CONFIG_SPI_FLASH_MACRONIX |
| 259 | #define CONFIG_SPI_FLASH_BAR |
| 260 | #define CONFIG_SF_DEFAULT_BUS 0 |
| 261 | #define CONFIG_SF_DEFAULT_CS 0 |
| 262 | #define CONFIG_SF_DEFAULT_SPEED 40000000 |
| 263 | #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 |
| 264 | #define FSL_QSPI_FLASH_NUM 1 |
| 265 | #define FSL_QSPI_FLASH_SIZE SZ_64M |
| 266 | #define QSPI0_BASE_ADDR QSPI1_IPS_BASE_ADDR |
| 267 | #define QSPI0_AMBA_BASE QSPI0_ARB_BASE_ADDR |
| 268 | #endif |
| 269 | |
Adrian Alonso | 1a8150d | 2015-09-03 11:49:28 -0500 | [diff] [blame] | 270 | #endif /* __CONFIG_H */ |