blob: f4d2ae3f410b4dc141bda68e48db0e61dfe8089b [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
Stefan Roesea471db02007-06-01 15:19:29 +02002 * (C) Copyright 2007
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
wdenkc6097192002-11-03 00:24:07 +000025
26#include <ppc_asm.tmpl>
27#include <config.h>
Stefan Roesea471db02007-06-01 15:19:29 +020028#include <asm-ppc/mmu.h>
wdenkc6097192002-11-03 00:24:07 +000029
30/**************************************************************************
31 * TLB TABLE
32 *
33 * This table is used by the cpu boot code to setup the initial tlb
34 * entries. Rather than make broad assumptions in the cpu source tree,
35 * this table lets each board set things up however they like.
36 *
37 * Pointer to the table is returned in r1
38 *
39 *************************************************************************/
Stefan Roesea471db02007-06-01 15:19:29 +020040 .section .bootpg,"ax"
41 .globl tlbtab
wdenkc6097192002-11-03 00:24:07 +000042
43tlbtab:
Stefan Roesea471db02007-06-01 15:19:29 +020044 tlbtab_start
Stefan Roesec57c7982005-08-11 17:56:56 +020045
Stefan Roesea471db02007-06-01 15:19:29 +020046 /*
47 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
48 * speed up boot process. It is patched after relocation to enable SA_I
49 */
50#ifndef CONFIG_NAND_SPL
51 tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
52#else
53 tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G)
Eugene OBriend2f68002007-07-31 10:24:56 +020054 tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
Stefan Roesea471db02007-06-01 15:19:29 +020055#endif
Stefan Roesec57c7982005-08-11 17:56:56 +020056
Stefan Roesea471db02007-06-01 15:19:29 +020057 /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
58 tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
Stefan Roesec57c7982005-08-11 17:56:56 +020059
Stefan Roesea471db02007-06-01 15:19:29 +020060 /* PCI base & peripherals */
61 tlbentry(CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I)
Stefan Roese8a316c92005-08-01 16:49:12 +020062
Stefan Roesea471db02007-06-01 15:19:29 +020063 tlbentry(CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
64 tlbentry(CFG_NAND_ADDR, SZ_4K, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
Stefan Roese8a316c92005-08-01 16:49:12 +020065
Stefan Roesea471db02007-06-01 15:19:29 +020066 /* PCI */
67 tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I)
68 tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I)
69 tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I)
70 tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I)
71
72 /* USB 2.0 Device */
73 tlbentry(CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I)
74
75 tlbtab_end
76
77#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
78 /*
79 * For NAND booting the first TLB has to be reconfigured to full size
80 * and with caching disabled after running from RAM!
81 */
82#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
83#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 0)
84#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
85
86 .globl reconfig_tlb0
87reconfig_tlb0:
88 sync
89 isync
90 addi r4,r0,0x0000 /* TLB entry #0 */
91 lis r5,TLB00@h
92 ori r5,r5,TLB00@l
93 tlbwe r5,r4,0x0000 /* Save it out */
94 lis r5,TLB01@h
95 ori r5,r5,TLB01@l
96 tlbwe r5,r4,0x0001 /* Save it out */
97 lis r5,TLB02@h
98 ori r5,r5,TLB02@l
99 tlbwe r5,r4,0x0002 /* Save it out */
100 sync
101 isync
102 blr
103#endif