- a7cb24f x86: crownbay: Enable SeaBIOS support by Bin Meng · 3 years, 5 months ago
- a252771 Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flash by Tom Rini · 3 years, 5 months ago
- 4dc1a5c Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 3 years, 5 months ago
- aba3fa1 Merge tag 'u-boot-amlogic-20210810' of https://source.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · 3 years, 5 months ago
- d248627 riscv: qemu: Enable MTD NOR flash support by Bin Meng · 3 years, 5 months ago
- 74773a4 flash.h: Remove CONFIG_SYS_FLASH_CFI from flash_info_t by Bin Meng · 3 years, 5 months ago
- 8fff9e3 mtd: kconfig: Fix CFI_FLASH dependency by Bin Meng · 3 years, 5 months ago
- e21c74f arm: kirkwood: Goflex Home: Update board maintainer by Tony Dinh · 3 years, 5 months ago
- 9176f4f arm: kirkwood: Dockstar: Update board maintainer by Tony Dinh · 3 years, 5 months ago
- 7e1c0d0 arm: mvebu: Hang if ddr3_init() fails by Pali Rohár · 3 years, 5 months ago
- 4cd61c4 arm: a37xx: pci: Fix handling PIO config error responses by Pali Rohár · 3 years, 5 months ago
- 7940d96 arm: mvebu: sata_mv failed to identify HDDs during cold start by Tony Dinh · 3 years, 5 months ago
- 8ac303d arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK by Pali Rohár · 3 years, 5 months ago
- 808cea9 arm: mvebu: axp: Set CONFIG_SYS_TCLK globally by Pali Rohár · 3 years, 5 months ago
- 7dd26bb arm: mvebu: msys: Set CONFIG_SYS_TCLK globally by Pali Rohár · 3 years, 5 months ago
- 2ddf554 arm: mvebu: a37x: Detect CONFIG_SYS_TCLK from SAR register by Pali Rohár · 3 years, 5 months ago
- 2979530 arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR register by Pali Rohár · 3 years, 5 months ago
- 293a8de arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device tree by Tony Dinh · 3 years, 5 months ago
- 296c32b arm: kirkwood: GoFlex Home: Add DM SATA configs by Tony Dinh · 3 years, 5 months ago
- 953b609 arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configs by Tony Dinh · 3 years, 5 months ago
- 3e5b62f configs: Resync with savedefconfig by Tom Rini · 3 years, 5 months ago
- 33b5176 configs: sei510/610: android bootflow via abootimg by Guillaume La Roque · 3 years, 5 months ago
- ddc8b22 configs: sei510/sei610: don't use hard-coded gpt uuids by Mattijs Korpershoek · 3 years, 5 months ago
- 941c159 configs: sei510/sei610: reformat PARTS_default by Mattijs Korpershoek · 3 years, 5 months ago
- 72cefba configs: meson64_android: boot android via abootimg by Guillaume La Roque · 3 years, 5 months ago
- 7039cbd configs: meson64_android: define BOOT_CMD macro by Mattijs Korpershoek · 3 years, 5 months ago
- efc28f6 configs: meson64_android: implement A/B slot support by Mattijs Korpershoek · 3 years, 5 months ago
- e6c782b configs: meson64_android: implement AVB support by Mattijs Korpershoek · 3 years, 5 months ago
- 285a83b configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB by Mattijs Korpershoek · 3 years, 5 months ago
- d5d0296 configs: meson64: permit redefining SYS_MALLOC_LEN by Mattijs Korpershoek · 3 years, 5 months ago
- 480aeb0 board: amlogic: odroid-n2: fix fdtfile suffix for n2-plus by Christian Hewitt · 3 years, 5 months ago
- 4da98ee Merge tag 'u-boot-imx-20210809' of https://source.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 3 years, 5 months ago
- 0dec203 Merge tag 'dm-pull-8aug21' of https://source.denx.de/u-boot/custodians/u-boot-dm by Tom Rini · 3 years, 5 months ago
- a8f4630 imx: cmd: use struct cmd_tbl by Peng Fan · 3 years, 5 months ago
- 3f2b4d7 arm: imx: add i.MX8ULP EVK support by Peng Fan · 3 years, 5 months ago
- 6beec0e arm: dts: add i.MX8ULP dtsi by Peng Fan · 3 years, 5 months ago
- 7a6577f ddr: Add DDR driver for iMX8ULP by Ye Li · 3 years, 5 months ago
- 3e23794 imx8ulp: add upower api support by Peng Fan · 3 years, 5 months ago
- 4b9423e imx8ulp: move struct mu_type to common header by Peng Fan · 3 years, 5 months ago
- e8b6804 imx8ulp: Add workaround for eMMC boot by Ye Li · 3 years, 5 months ago
- 27b6a45 imx8ulp: Use DGO_GP5 to get boot config by Ye Li · 3 years, 5 months ago
- 8a58897 imx8ulp: soc: correct reset cause by Peng Fan · 3 years, 5 months ago
- d24c7d5 driver: misc: imx8ulp: Add fuse driver for imx8ulp by Ye Li · 3 years, 5 months ago
- fdfa214 arm: imx8ulp: add iomuxc support by Peng Fan · 3 years, 5 months ago
- 525a28c arm: imx8ulp: add dummy imx_get_mac_from_fuse by Peng Fan · 3 years, 5 months ago
- 16243a1 arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain by Ye Li · 3 years, 5 months ago
- 619412a arm: iMX8ULP: Add boot device relevant functions by Ye Li · 3 years, 5 months ago
- a7990a8 arm: imx8ulp: Probe the S400 MU device in arch init by Ye Li · 3 years, 5 months ago
- 3912d4b imx8ulp: unify rdc functions by Peng Fan · 3 years, 5 months ago
- a443ec2 arm: imx8ulp: release trdc and assign lpav from RTD to APD by Peng Fan · 3 years, 5 months ago
- 3df5649 arm: imx8ulp: add trdc release request by Peng Fan · 3 years, 5 months ago
- 367ff4b arm: imx8ulp: add rdc support by Peng Fan · 3 years, 5 months ago
- ba472a2 arm: imx8ulp: release and configure XRDC at early phase by Ye Li · 3 years, 5 months ago
- 26b5321 drivers: misc: s400_api: Update API for fuse read and write by Ye Li · 3 years, 5 months ago
- 7aeaf4d drivers: misc: imx8ulp: Update S400 API for release RDC by Ye Li · 3 years, 5 months ago
- 6306f75 drivers: misc: imx8ulp: Add S400 API for image authentication by Ye Li · 3 years, 5 months ago
- a6ffde5 drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6 by Ye Li · 3 years, 5 months ago
- aadd6ca arm: imx8ulp: Update the reset vector in u-boot by Ye Li · 3 years, 5 months ago
- 3a01f72 arm: imx8ulp: disable wdog3 by Peng Fan · 3 years, 5 months ago
- 610083e arm: imx8ulp: Enable full L2 cache in SPL by Ye Li · 3 years, 5 months ago
- 981f040 arm: imx8ulp: soc: Change to use CMC1 to get bootcfg by Ye Li · 3 years, 5 months ago
- 744c5fd drivers: mmc: fsl_esdhc_imx: support i.MX8ULP by Peng Fan · 3 years, 5 months ago
- a84dab4 arm: imx8ulp: add clock support by Peng Fan · 3 years, 5 months ago
- 166bc7f driver: serial: fsl_lpuart: support i.MX8ULP by Peng Fan · 3 years, 5 months ago
- 0bf4a77 pinctrl: Add pinctrl driver for imx8ulp by Ye Li · 3 years, 5 months ago
- 06918de net: fec_mxc: support i.MX8ULP by Peng Fan · 3 years, 5 months ago
- 0c00d03 driver: misc: Add MU and S400 API to communicate with Sentinel by Ye Li · 3 years, 5 months ago
- 3854a06 arm: imx: move container Kconfig under mach-imx by Peng Fan · 3 years, 5 months ago
- 6f3858d arm: imx8ulp: add container support by Ye Li · 3 years, 5 months ago
- 20ed81e arm: imx: parse-container: guard included header files by Peng Fan · 3 years, 5 months ago
- 31f0085 arm: imx8: Move container image header file to mach-imx by Ye Li · 3 years, 5 months ago
- 7d84978 arm: imx8: Move container parser and image to mach-imx common folder by Ye Li · 3 years, 5 months ago
- 9ef89ea arm: imx: basic i.MX8ULP support by Peng Fan · 3 years, 5 months ago
- c17f593 imx: imx8ulp: add get reset cause by Peng Fan · 3 years, 5 months ago
- 77c3b9c arm: imx8ulp: support print cpu info by Peng Fan · 3 years, 5 months ago
- 5f17fef arm: imx: sys_proto: move boot mode define to common header by Peng Fan · 3 years, 5 months ago
- 331d40d arm: imx: add i.MX8ULP cpu type and helper by Peng Fan · 3 years, 5 months ago
- 19b990b arm: imx: add i.MX8ULP basic Kconfig option by Peng Fan · 3 years, 5 months ago
- 2eb8564 board: gateworks: venice: add board model to dt by Tim Harvey · 3 years, 6 months ago
- c10bf27 configs: imx8mm_venice_defconfig: remove unused SPL features by Tim Harvey · 3 years, 6 months ago
- 1d1f3c8 mx28evk: Convert to driver model by Fabio Estevam · 3 years, 11 months ago
- 3bbc48e board: ge: bx50v3: Add PCIe reset to DT by Sebastian Reichel · 3 years, 5 months ago
- 0ac226b mx7dsabresd: Select CONFIG_IMX_HAB by Fabio Estevam · 3 years, 5 months ago
- a8a72c3 board: gateworks: venice: add imx8mm-gw7902 support by Tim Harvey · 3 years, 6 months ago
- 57d27aa board: gateworks: venice: add board model/serial# to env by Tim Harvey · 3 years, 6 months ago
- 67c6d03 board: gateworks: venice: use bus numbers vs names by Tim Harvey · 3 years, 6 months ago
- 692c25e board: gateworks: venice: get mem size from dt by Tim Harvey · 3 years, 6 months ago
- 42bc70d arm: dts: imx8mm-venice-gw7901: use common u-boot dtsi by Tim Harvey · 3 years, 6 months ago
- aea162c arm: dts: imx8mm-venice-gw700x: fix fifo-depth phy props by Tim Harvey · 3 years, 6 months ago
- 98559e0 arm: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS by Tim Harvey · 3 years, 6 months ago
- 82679f9 warp: Use the correct symbol for CONFIG_IMX_HAB by Fabio Estevam · 3 years, 6 months ago
- 249ee65 imx: ventana: add support for GW54xx-G revision by Tim Harvey · 3 years, 6 months ago
- bf6bdef imx: ventana: add support for GW53xx-G revision by Tim Harvey · 3 years, 6 months ago
- 3ef59ac imx: ventana: add GW5913 support by Tim Harvey · 3 years, 6 months ago
- 744d21c imx: ventana: add GW5912 support by Tim Harvey · 3 years, 6 months ago
- 2580540 imx: ventana: add GW5910 support by Tim Harvey · 3 years, 6 months ago
- 2d02586 imx: ventana: use dt for hwmon by Tim Harvey · 3 years, 6 months ago
- 49b4efe imx: ventana: remove hard-coded flexcan standby pin by Tim Harvey · 3 years, 6 months ago
- 395f17d imx: ventana: remove hard-coded analog video codec enable by Tim Harvey · 3 years, 6 months ago
- a194e6e imx: ventana: remove hard-coded USB OTG pinmux by Tim Harvey · 3 years, 6 months ago