Squashed 'dts/upstream/' changes from aaba2d45dc2a..b35b9bd1d4ee b35b9bd1d4ee Merge tag 'v6.8-dts-raw' 1f50937554b4 Merge tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 576ba37bcbf9 Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net c83dc02bae3e Merge tag 'qcom-arm64-fixes-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes fb254675a395 ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix c748b8a7dbe8 Merge tag 'tegra-for-6.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes a2e893adde74 Merge tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes abb0f1b369e4 Merge tag 'qcom-arm64-fixes-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes f143aa9a89ec Revert "arm64: dts: qcom: msm8996: Hook up MPM" 9a5690b7be49 arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed ca6dcb63bd34 arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed 8532bb680bd0 dt-bindings: net: renesas,ethertsn: Document default for delays 42569705a4a0 Merge tag 'v6.8-rc6-dts-raw' 06c62487a0b4 arm64: dts: imx8mp: Fix LDB clocks property 7c93039778e4 arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM 7f9a36c5ce39 ARM: dts: imx7: remove DSI port endpoints 87ea8526eaf3 Merge tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson d4a4b892cd33 Merge tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 4faf103c7468 Merge tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes c1858748b935 Merge tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes f1bb487d660f LoongArch: dts: Minor whitespace cleanup b60485a78d66 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux d641a222a5d4 arm64: tegra: Fix Tegra234 MGBE power-domains 31aeabc2669e ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes 8c5d69d4f1e9 arm64: dts: qcom: Fix interrupt-map cell sizes 43b35c5b7347 arm: dts: Fix dtc interrupt_map warnings f00ce91341b9 arm64: dts: Fix dtc interrupt_provider warnings c21ad68d3254 arm: dts: Fix dtc interrupt_provider warnings 20a9f605f025 Merge tag 'v6.8-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes 1d9be1dcae7c Merge tag 'imx-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes c27426925b7b Merge tag 'v6.8-rc5-dts-raw' 582c3e28f603 Merge tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 81da29f3007e arm64: tegra: Set the correct PHY mode for MGBE 30e4bc5d76ff Merge tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux f0c34a9f448e riscv: dts: sifive: add missing #interrupt-cells to pmic db36be2a8839 arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names ec7d411e57d6 arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node 105b1e4e5e28 arm64: dts: rockchip: set num-cs property for spi on px30 a05f0ca9a008 arm64: dts: rockchip: minor rk3588 whitespace cleanup 41d6b3786aa9 riscv: dts: starfive: replace underscores in node names 910c8965eb0c dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg" d78e8a541b0a net: marvell,prestera: Fix example PCI bus addressing b40e56bea854 ASoC: dt-bindings: google,sc7280-herobrine: Drop bouncing @codeaurora 48b3246a26fe Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector" a1c414f8f89a Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector" 768ad06f1efa arm64: dts: tqma8mpql: fix audio codec iov-supply 77040f90f388 Merge tag 'v6.8-rc3-dts-raw' 65143ffc8608 arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds 39497955d1c0 ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes 610e244453be arm64: dts: rockchip: Fix the num-lanes of pcie3x4 on Cool Pi CM5 EVB d6e600aea013 arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB 6be17990ec10 arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi CM5 EVB 77765eecb670 arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B 7bca62b5ae66 arm64: dts: qcom: sm6115: Fix missing interconnect-names b2bc58ba4504 arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC 9474eb5c3d86 ALSA: Various fixes for Cirrus Logic CS35L56 support 1e8df48d4da1 dt-bindings: tpm: Drop type from "resets" 4d5c46ab184f dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints fede8bd8306c dt-bindings: xilinx: replace Piyush Mehta maintainership eb691d1ece78 Merge tag 'v6.8-rc2-dts-raw' 5b093a56e797 ASoC: sun4i-spdif: Add Allwinner H616 compatible f2ce9dca7322 ASoC: sun4i-spdif: Fix requirements for H6 fd23c7505f20 arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio cfbd9243ac13 arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio 101ce3470b0e Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm 71ca3bf1c96e Merge tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 74c898882ebb riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format 28b77b56d972 arm64: dts: rockchip: mark system power controller on rk3588-evb1 986a9f1778ef Merge tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes 6cf0227916ec arm64: dts: Fix TPM schema violations 60245a9006e9 ARM: dts: Fix TPM schema violations 92924d8db61a Merge tag 'exynos-drm-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes 3b240d0d94a9 dt-bindings: media: Remove K3 Family Prefix from Compatible 186b38b97035 ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd c4f0c99dffb8 arm64: dts: exynos: gs101: comply with the new cmu_misc clock names 429796fee0f1 dt-bindings: clock: gs101: rename cmu_misc clock-names 80d76b25d32f Merge tag 'v6.8-rc1-dts-raw' 339d8d1caab5 Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip df1980733ce9 Merge tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine 8c23badf69c3 Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux d5a95e32a555 Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson 815e38060bf4 Merge tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound f07a1b362766 Merge tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply 9411a3099e9c Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux fcb7108dc362 Merge tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 8e06ce5908ff Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 7b18579c0bef Merge tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy dd4871a00012 Merge tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux 8dfd2acd2c0c Merge tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight 736ecd5cf03c Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu 7d29a06cb311 dt-bindings: i2c: document st,stm32mp25-i2c compatible 365a95704e98 dt-bindings: at24: add ROHM BR24G04 05d2a9834fd6 Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 70a7bee43907 Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 6a04bf7a4f07 Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc e0c35697cd80 Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci cf29a14b0a23 Merge tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 902219ef9ed0 Merge tag 'mailbox-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox c437f65015a8 Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds d0902d05b4a0 Merge tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 8be1d4636d32 Merge tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux 6eaaddf12639 Merge tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2cb012b6fe68 LoongArch: dts: DeviceTree for Loongson-2K2000 6ab0a6f08b83 LoongArch: dts: DeviceTree for Loongson-2K1000 491426707de1 LoongArch: dts: DeviceTree for Loongson-2K0500 c007f27059d1 dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names d9a3ae336ecb dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names 4ee19a9d7583 dt-bindings: loongarch: Add Loongson SoC boards compatibles 3e99ee3f7c53 dt-bindings: loongarch: Add CPU bindings for LoongArch e8bc7c9c625e dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory f5918b47370e dt-bindings: rtc: max31335: add max31335 bindings 7e34d7b53615 rtc: rv8803: add wakeup-source support 81d186f05921 Merge branch 'pci/dt-bindings' 8bd798490681 Merge branch 'pci/controller/rcar' e166e5aad3b0 Merge branch 'pci/controller/cadence' 9de355a75fde dt-bindings: gpio: xilinx: Fix node address in gpio 28bf1e4e9775 dt-bindings: mailbox: qcom-ipcc: document the X1E80100 Inter-Processor Communication Controller f6b31bdd3c60 dt-bindings: mailbox: add Versal IPI bindings c3301d070937 dt-bindings: mailbox: zynqmp: extend required list 6bf977408719 dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks b9ea63718a7e dt-bindings: mailbox: qcom,apcs-kpss-global: drop duplicated qcom,ipq8074-apcs-apps-global e485b251a3a4 Merge tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 60edd8755b1b Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm f946a0610062 Merge tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid 5a9222178c60 Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 0c57fa00ac11 Merge tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc 120152dd192c Merge tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm f25acec1f182 Merge tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss 040b6611cd72 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 432f2b929aa4 Merge tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux 5df1a59e6086 Merge tag 'linux-watchdog-6.8-rc1' of git://www.linux-watchdog.org/linux-watchdog 1d81fba29be6 Merge tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging dd7110d3d5d1 Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound c916bd7a1d38 Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm 32704b03c7ec Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi c0d1d21fe5ff dt-bindings: fpga: altera: Convert bridge bindings to yaml 86986ec77fc7 dt-bindings: fpga: Convert bridge binding to yaml 149beabce38e dt-bindings: vendor-prefixes: Add smi da831df01407 Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc d0949aef9e29 Merge tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc c5ee04d9a430 Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 17d4b2f2c7c6 dt-bindings: riscv: Document cbop-block-size 6361e08793d7 dt-bindings: riscv: permit numbers in "riscv,isa" 99f0fa81f51f dt-bindings: riscv: cpus: Clarify mmu-type interpretation 5744984c407c ARM: dts: usr8200: Fix phy registers fd6e692990ee dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" db07ea081cee dt-bindings: power: Clarify wording for wakeup-source property 9deb5d7e7649 Merge tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 f412e763e552 dt-bindings: mfd: sprd: Add support for UMS9620 b50b2489e1a2 dt-bindings: input: bindings for Adafruit Seesaw Gamepad 9fcf5401177c Merge patch series "riscv: hwprobe: add Zicond, Zacas and Ztso support" 6b479ffcb9ed dt-bindings: riscv: add Zacas ISA extension description 45e895d242d0 Merge remote-tracking branch 'palmer/fixes' into for-next 129abc9e5b89 Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 72e795875f31 Merge tag 'mtd/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux a0d6ec02f5dd Merge tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi 092d72f89f32 Merge tag 'regulator-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator f19bbcb501a1 Merge branch 'clk-rs9' into clk-next 6c5ff3361f38 Merge branches 'clk-zynq', 'clk-xilinx' and 'clk-stm' into clk-next 5348f28123c3 Merge branches 'clk-imx', 'clk-qcom', 'clk-amlogic' and 'clk-mediatek' into clk-next dde8a0d89600 Merge branches 'clk-versa', 'clk-silabs', 'clk-samsung', 'clk-starfive' and 'clk-sophgo' into clk-next 147299598f64 dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES 5e8ad2415574 dt-bindings: tpm: Document Microsoft fTPM bindings 4446def763e6 dt-bindings: tpm: Convert IBM vTPM bindings to DT schema d46251bba773 dt-bindings: tpm: Convert Google Cr50 bindings to DT schema 4c0c46fcf77f dt-bindings: tpm: Consolidate TCG TIS bindings fc825b2e9d71 dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible 5d51cf126484 dt-bindings: arm: Add remote etm dt-binding 32c458bd3442 dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo c9ab453dff7c media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas 481554b6b752 dt-bindings: display: panel: Add synaptics r63353 panel controller e04e21bef16e dt-bindings: arm: merge qcom,idle-state with idle-state 452e35e6ff26 Merge tag 'irq-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip d35742374b96 dt-bindings: display: samsung,exynos-mixer: Fix 'regs' typo ac8ffc6d0764 Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux daf5be0b133e Merge tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux b633610fad05 Revert "net: stmmac: Enable Per DMA Channel interrupt" fc2b6856183b dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example 5c111c61a49a dt-bindings: net: snps,dwmac: per channel irq 94d319464237 ASoC: dt-bindings: move tas2563 from tas2562.yaml to tas2781.yaml 8fbbcaccc3ff Merge tag 'socfpga_dts_updates_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt 1161aaee27ae dt-bindings: mmc: add Marvell ac5 e9a747531a5d dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0 57b4e3b1199f Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net cab393f5e80d dt-bindings: serial: Describe ARM dcc interface 1d92607a561e dt-bindings: usb: dwc3: Limit num-hc-interrupters definition cee9797861a0 dt-bindings: usb: xhci: Add num-hc-interrupters definition 4823f8dd230f arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry 4a4f48930e20 dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue 4ddd871b77e8 arm64: dts: qcom: msm8996: Remove PNoC clock from MSS 5598c7c58459 arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI a06133f3b90d arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI 0e31729b965a arm64: dts: qcom: msm8939: Drop RPM bus clocks a9231f1fa44d arm64: dts: qcom: sdm630: Drop RPM bus clocks 7806d0946f48 arm64: dts: qcom: qcs404: Drop RPM bus clocks 6bbd4a339ffd arm64: dts: qcom: msm8996: Drop RPM bus clocks 6c5785d4dec0 arm64: dts: qcom: msm8916: Drop RPM bus clocks d99558e0d6ba dt-bindings: usb: qcom,dwc3: Fix SDM660 clock description 0e7834fa9ba2 dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding f7405c1062e5 dt-bindings: connector: Add child nodes for multiple PD capabilities a2f2b957f7b0 arm64: dts: intel: minor whitespace cleanup around '=' a21ad91a14ac arm64: dts: socfpga: agilex: drop redundant status c64326a0161d arm64: dts: socfpga: agilex: add unit address to soc node 70eea150a8db arm64: dts: socfpga: agilex: move firmware out of soc node 056acfded5ce arm64: dts: socfpga: agilex: move FPGA region out of soc node 8e373ef160c7 arm64: dts: socfpga: agilex: align pin-controller name with bindings 56a65e118b36 arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties 5ea405da6608 arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings 0bc2b8deec9a arm64: dts: socfpga: stratix10: add unit address to soc node 3932c6fc63c2 arm64: dts: socfpga: stratix10: move firmware out of soc node 174dfac57ae2 arm64: dts: socfpga: stratix10: move FPGA region out of soc node e63c11b1c86c arm64: dts: socfpga: stratix10: align pincfg nodes with bindings 5ad3116fb135 arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB 9185b800f9c3 arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size b3832f4d101c ARM: dts: socfpga: align NAND controller name with bindings 7772fcc4eef4 ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size f466442c93ff dt-bindings: clock: mediatek: add clock controllers of MT7988 967ed08fdbd4 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs 8bb435f3ea7d dt-bindings: clock: mediatek: add MT7988 clock IDs 8b8c659b2121 dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC b822e804fd2c dt-bindings: gpio: add NPCM sgpio driver bindings f4c19e862d2b dt-bindings: gpio: realtek: Add realtek,rtd-gpio 6690161ed7a9 Merge branches 'apple/dart', 'arm/rockchip', 'arm/smmu', 'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next 7382fa53a648 dt-bindings: net: renesas,etheravb: Document RZ/G3S support 247b8886892f dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor fec847c57a81 dt-bindings: Add MP2856/MP2857 voltage regulator device 42c42ff6c177 dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml 6c13c9d07051 dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074 1e934476b96c dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA 82a434279c9e dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901 5fa4567d6c4f Merge tag 'v6.8-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt a04786e0b7e0 Merge tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 0bf9a2425459 Merge tag 'qcom-arm64-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt a3fde0732d5b Merge tag 'qcom-arm32-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 62073621d812 Merge tag 'arm-soc/for-6.8/devicetree' of https://github.com/Broadcom/stblinux into soc/dt 4cfe8fd4e2b4 Merge tag 'sprd-dt-6.8-rc1' of https://github.com/lyrazhang/linux into soc/dt a355b8e8cbdd dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples 36a030b546d0 dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names ca1c0a8c8091 dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller 7123707b90de dt-bindings: thermal-zones: Document critical-action c29ec9b83fd7 dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor 5a12787401b5 dt-bindings: thermal: loongson,ls2k-thermal: Fix binding check issues 0a6d923c5231 dt-bindings: thermal: convert Mediatek Thermal to the json-schema dc5dd3862b77 dt-bindings: input: iqs269a: Add bindings for OTP variants 5aa00301cee3 dt-bindings: input: iqs269a: Add bindings for slider gestures c4635c803af3 Merge tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next 571d91b8d8df arm64: dts: rockchip: Fix led pinctrl of lubancat 1 548cbdf62c21 arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6 86c28823371d arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b 275bc737b480 arm64: dts: rockchip: support poweroff on the rock-5b e4f7332bb7f8 arm64: dts: rockchip: Support poweroff on Orange Pi 5 d0c46aeba839 arm64: dts: rockchip: nanopc-t6 sdmmc beautification df73c00bc509 arm64: dts: sprd: Change UMS512 idle-state nodename to match bindings 12243eba2b74 arm64: dts: sprd: Add clock reference for pll2 on UMS512 af72bfcc73f3 arm64: dts: sprd: Removed unused clock references from etm nodes d8f5562e697b arm64: dts: sprd: Add support for Unisoc's UMS9620 bd8f67f82f65 dt-bindings: arm: Add compatible strings for Unisoc's UMS9620 9da3db96fae0 arm64: dts: sprd: fix the cpu node for UMS512 3ebc08960525 Merge tag 'v6.7-rc7' into gpio/for-next cb90fcbed71e dt-bindings: timer: Add StarFive JH8100 clint 6f2b19f4df72 dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs 4421b3e3124f dt-bindings: iio: Add AD7091R-8 51a0454cffd6 dt-bindings: power: supply: bq24190: Add BQ24296 compatible 4639caeeab2f dt-bindings: power: reset: xilinx: Rename node names in examples c873132667ed dt-bindings: power: reset: qcom-pon: fix inconsistent example 64cf7a912b11 arm64: dts: rockchip: Fix rk3588 USB power-domain clocks 815a2542ad42 arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts 9df823a6207b arm64: dts: rockchip: Support poweroff on NanoPC-T6 78bd00069022 arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup 9d6e0741ae7c arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB a64a2e009e21 dt-bindings: arm: rockchip: Add Cool Pi CM5 4397d62daec8 arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B f1a9c321e26f dt-bindings: arm: rockchip: Add Cool Pi 4B 1e413c69529f dt-bindings: vendor-prefixes: Add Cool Pi a67ded35095e arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e e0ec5767b690 ARM: dts: rockchip: Remove rockchip,default-sample-phase from rk3036.dtsi 75e0afe6681c ARM: dts: rockchip: Add stdout-path for rk3036 kylin 5b38dc06a1e9 dt-bindings: watchdog: qcom,pm8916-wdt: add parent spmi node to example d2f78877f2ea dt-bindings: watchdog: nxp,pnx4008-wdt: convert txt to yaml af1fdc5cd02d dt-bindings: watchdog: qca,ar7130-wdt: convert txt to yaml 5c3d9631b9ac dt-bindings: watchdog: intel,keembay: reference common watchdog schema 6d86f883fd9c dt-bindings: watchdog: re-order entries to match coding convention e28051167c06 dt-bindings: touchscreen: neonode,zforce: Use standard properties 3119a224ac1c dt-bindings: touchscreen: convert neonode,zforce to json-schema 15bf36928144 Merge tag 'icc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next dd37eb39a550 dt-bindings: input: convert drv266x to json-schema 795f4eddfec7 Merge tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 991ab34b2120 Merge tag 'reset-for-v6.8' of git://git.pengutronix.de/pza/linux into soc/drivers 4e7b4659bc67 dt-bindings: mtd: partitions: u-boot: Fix typo 35dd951a7fd5 Merge tag 'riscv-cache-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers 69b18d58cc6d Merge tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers fc5aa9bf69fd Merge tag 'samsung-drivers-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers 84c9739eb5b5 Merge tag 'qcom-drivers-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers 0ef14d7a1f46 dt-bindings: crypto: qcom-qce: document the SC7280 crypto engine 2fd8394e6d9f dt-bindings: crypto: qcom-qce: constrain clocks for SM8150-compatible QCE 40fd9d4f3234 dt-bindings: crypto: qcom-qce: constrain clocks for IPQ9574 QCE 30960ac02d6e dt-bindings: rng: starfive: Add jh8100 compatible string e6272a79f69c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net dcd8ac1c5dd8 dt-bindings: spi: stm32: add st,stm32mp25-spi compatible 87166d1d3f3f Merge tag 'riscv-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt 69abc2365d38 dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding 822a13d2bf90 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible 6722c7fe2a57 dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible a38a399bccf1 dt-bindings: phy: mediatek: tphy: add a property for force-mode switch ca521e2ecf25 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header aa156a9707ec Merge tag 'amlogic-arm64-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt e6127e00f352 Merge tag 'mvebu-dt64-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt aad08c0a0671 Merge tag 'mvebu-dt-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt e4320c558711 Merge tag 'samsung-dt64-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 077793e138f6 Merge tag 'qcom-arm32-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 7ff5e1692425 Merge tag 'ti-k3-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt f009c98b2a3f dt-bindings: iio: dac: add MCP4821 e46c2c536959 Merge tag 'ti-keystone-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt edeab43af36b Merge tag 'zynqmp-dt-for-6.8' of https://github.com/Xilinx/linux-xlnx into soc/dt 4e78ad68f722 Merge tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt f4ece4b3d883 Merge tag 'imx-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt 1a2b6b1db701 Merge tag 'imx-bindgins-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt 71e20fbc3d5b Merge tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt 056c9efa37c5 Merge tag 'renesas-dts-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt 339491d0999f Merge tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt 06086605676a dt-bindings: dma: fsl-edma: Add fsl-edma.h to prevent hardcoding in dts 640904451ab8 dt-bindings: dmaengine: Add Loongson LS2X APB DMA controller f88d59ec5d12 Merge tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt e833ff47f9b9 Merge tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt 9f821c027b01 Merge tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt 4bab8a451f49 Merge tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt a4789dd06449 Merge tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 5045526f0b7c Merge tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt a7603f8260b8 Merge tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 16a1d6e0b098 Merge tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 0f1f66f39700 ARM: dts: ste: minor whitespace cleanup around '=' 22532c5d3f4a Merge tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt 5288e13a2ad4 Merge tag 'hisi-arm64-dt-for-6.8' of https://github.com/hisilicon/linux-hisi into soc/dt f44f238cabce Merge tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next 61f41fa45eaf Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next 07d575b06ff9 dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml fc02de1f5dc0 dt-bindings: riscv: cpus: Add AMD MicroBlaze V compatible 780449a81d3c dt-bindings: pwm: remove Xinlei's mail f96dd7edb887 arm64: dts: qcom: sc8180x: Fix up PCIe nodes b1ecf20e17e0 arm64: dts: qcom: sc8180x: Mark PCIe hosts cache-coherent eeed8f113289 dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp 2ef9211e8711 dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent 188c161805d3 dt-bindings: pinctrl: qcom: drop common properties 7834682c0d2c dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings c31ea3c9600f dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts 6cec6f6f090c dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts ef7b1c134921 dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts a3abecdd0e2e dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts 2b1d1c0dd621 dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts 36f8bb953634 dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts 670ced18d87f dt-bindings: pinctrl: qcom: create common LPASS LPI schema 5ca197c58799 dt-bindings: pinctrl: qcom: Add SM4450 pinctrl 8d27a131f7ad dt-bindings: pinctrl: qcom,pmic-mpp: clean up example 6674c2217ce1 Merge tag 'mediatek-drm-next-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next d7dde4a72dfa Merge tag 'drm-msm-next-2023-12-15' of https://gitlab.freedesktop.org/drm/msm into drm-next 64ddcb330a18 arm64: dts: qcom: x1e80100-qcp: Fix supplies for some LDOs in PM8550 206ab99c38ce arm64: dts: qcom: sm8550: Update idle state time requirements 319f395fbc2a arm64: dts: qcom: sm8550: Separate out X3 idle state af2f75b56294 ARM: dts: qcom: sdx55: Fix the base address of PCIe PHY 4a72661b117b arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK 5b72e989a37a arm64: dts: qcom: x1e80100: align mem timer size cells with bindings b17d7383c10f arm64: dts: qcom: sc7280: Mark SDHCI hosts as cache-coherent 3840ead2163a ARM: dts: qcom: sdx55: fix USB SS wakeup 9e773fad2487 ARM: dts: qcom: sdx55: fix USB DP/DM HS PHY interrupts d0728def7588 ARM: dts: qcom: sdx55: fix pdc '#interrupt-cells' 0ee9dac79d46 ASoC: qcom: add sound card support for SM8650 345b970f1857 add es8326 dt-bindings, commonize headset codec 85a45459eeed GPIO inclusion fixes to misc sound drivers 616e88e1109d arm64: dts: qcom: sc8180x: fix USB SS wakeup f3d1b2acf659 arm64: dts: qcom: sdm670: fix USB SS wakeup 987f42804a25 arm64: dts: qcom: sdm670: fix USB DP/DM HS PHY interrupts 2e58236aa851 ASoC: dt-bindings: qcom,lpass-va-macro: remove spurious contains in if statement bded77d8cc7b dt-bindings: regulator: qcom,usb-vbus-regulator: clean up example e1481a467961 powerpc/fsl: Fix fsl,tmu-calibration to match the schema 26e2fad496d4 arm64: dts: amlogic: fix format for s4 uart node 8a5115be3855 arm64: dts: amlogic: drop redundant status=okay 799049c22bf2 arm64: dts: amlogic: enable some nodes for board AQ222 3fea93dcdd73 arm64: dts: amlogic: add some device nodes for S4 44721ac7f4da Merge tag 'drm-misc-next-2023-12-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next d623bb97a280 Merge tag 'samsung-pinctrl-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel 81d84dd62616 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS WSA 4f673348bd77 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS VA d5b1bc404268 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS TX 40420db77069 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS RX 605001444f21 ASoC: dt-bindings: qcom,sm8250: Add X1E80100 sound card 4e179f2c3905 ASoC: dt-bindings: mt8188-mt6359: add es8326 support 0c819517fcb2 ASoC: dt-bindings: qcom,sm8250: document SM8650 sound card 0292b51ac8c4 ASoC: tegra: tegra20_ac97: Convert to use GPIO descriptors 4c6bc6503e5e Merge tag 'device_is_big_endian-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into gpio/for-next 31d8096d43a1 dt-bindings: gpio: dwapb: allow gpio-ranges 873d4c02bbfa dt-bindings: clock: google,gs101: rename CMU_TOP gate defines bfc73914844a dt-bindings: clock: si5351: add PLL reset mode property af0493badd9d dt-bindings: clock: si5351: convert to yaml d1a5fb288be1 dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform ee353e29bfb4 dt-bindings: clk: rs9: Add 9FGV0841 48b20705829d dt-bindings: clock: brcm,kona-ccu: convert to YAML b2b282bb3ba9 dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema e35ce136c12f dt-bindings: clock: xilinx: add versal compatible 746818ace7a3 dt-bindings: rtc: Add Nuvoton ma35d1 rtc d8c717fd9bc8 dt-bindings: Remove alt_ref from versal e9caccbf099c arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting b616df631790 arm64: dts: qcom: sc8180x: Describe the GIC redistributor ae7e39a80f0f arm64: dts: qcom: sc8180x: Add interconnects to UFS 0f32e7aa54e0 arm64: dts: qcom: sc8180x: Add missing MDP clocks 3641f17d731d arm64: dts: qcom: sc8180x: Add UFS GDSC 2bbb23973697 arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi a5b4605b6fc6 ARM: dts: qcom: msm8974*: Re-enable remoteprocs on various boards f1ecb44efc55 ARM: dts: qcom: msm8974: Remove bogus cd-gpio pinctrl 9dd85d38d004 ARM: dts: qcom: msm8974-klte: Remove unused property 34c2fdcebf94 arm64: dts: qcom: sc7280: Rename reserved-memory nodes 84a50703ca7d dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles 47f83514132e dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names 1dce719ef64f arm64: dts: qcom: sc7280: Remove unused second MPSS reg afedac693f18 arm64: dts: qcom: sdm670: add display subsystem 1d8d2d147ea5 dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel 3ea56a52a7c2 dt-bindings: wdt: Add ts72xx 18522cdf3ec6 dt-bindings: watchdog: dlg,da9062-watchdog: Document DA9063 watchdog 688fe0bdd724 dt-bindings: watchdog: dlg,da9062-watchdog: Add fallback for DA9061 watchdog 9054003bb13e dt-bindings: watchdog: mediatek,mtk-wdt: add MT7988 watchdog and toprgu 63d466a6e3b3 dt-bindings: watchdog: realtek,rtd1295-watchdog: convert txt to yaml 5b6c41392896 dt-bindings: watchdog: qcom-wdt: Make the interrupt example edge triggered 4f8423c375eb dt-bindings: iio: chemical: add aosong,ags02ma 766801c2fc4b dt-bindings: vendor-prefixes: add aosong 530dcc2cff54 arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode a63d7ac5c9ca arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host 6177bf5ba3b4 arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY cccb449ab331 arm64: dts: qcom: sm8150: add DisplayPort controller 414013ad4921 arm64: dts: qcom: sm8150-hdk: fix SS USB regulators 94e5a8422a14 arm64: dts: qcom: sm8150-hdk: enable HDMI output 94cd2b0ff062 arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX d8577fce5e20 arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes e14f9c1044bd arm64: dts: qcom: sm8550-qrd: add PM8010 regulators 66e97e0962a7 arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators 6437200479ec arm64: dts: qcom: qcm2290: Hook up MPM 75b87eb7e3ee arm64: dts: qcom: msm8996: Hook up MPM e043072a3a33 arm64: dts: qcom: sm6375: Hook up MPM 623a6180066f dt-bindings: arm: qcom: Add Motorola Moto G 4G (2013) 030e5c73208a arm64: dts: qcom: x1e80100-crd: Fix supplies for some LDOs in PM8550 58e87053c1f0 arm64: dts: qcom: sc7280: add QCrypto nodes 6d138c9b4127 arm64: dts: qcom: sc7180: Switch pompom to the generic edp-panel 9248e79cd654 arm64: dts: qcom: sm8150: fix USB SS wakeup 8143f0f67202 arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts 1d46c82d351b arm64: dts: qcom: sdm845: fix USB SS wakeup 5c261eb8cd11 arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts 2998fdbc15fe arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts 220ee261025f arm64: dts: qcom: sm8550: drop unneeded assigned-clocks from codec macros ef2823c0a498 arm64: dts: qcom: sm8550: move Soundwire pinctrl to its nodes 611112fa3972 arm64: dts: qcom: sm8450: drop unneeded assigned-clocks from codec macros 7fe6ee08b28c arm64: dts: qcom: sm8450: move Soundwire pinctrl to its nodes eb6e95625c03 arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration 6f45533e32ad arm64: dts: qcom: sm8650: drop unneeded assigned-clocks from WSA macro 108c60eb7746 dt-bindings: arm: qcom: Fix up htc-memul compatible c493fe546f0a arm64: dts: qcom: sm6115: Hook up interconnects fd22f3a58a9e Merge branch 'icc-sm6115' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into HEAD 85a531800a07 ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree 9c323b20cda8 ARM: dts: qcom: ipq4019: add dedicated SDHCI compatible 2fcaa70bfc3c arm64: dts: qcom: ipq8074: add dedicated SDHCI compatible 757c981838e3 arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports 34e4f27862d1 arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property 61e7df01e058 arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property 786be94e8465 arm64: dts: qcom: qrb5165-rb5: add the Bluetooth node fe9d727180d2 arm64: dts: qcom: sa8775p: Add missing space between node name and braces 8df2548eb151 arm64: dts: qcom: Use "pcie" as the node name instead of "pci" 756ec289cf35 ARM: dts: qcom: Use "pcie" as the node name instead of "pci" 2066a55949a7 arm64: dts: qcom: acer-aspire1: Add sound 90485d1f88ce arm64: dts: qcom: acer-aspire1: Correct audio codec definition 3d97796b14f9 arm64: dts: qcom: acer-aspire1: Enable RTC 5d870a6a209b arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings 1e57f262d57c arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings 731a9974488a arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings 8a512baad9fa arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings 9c4063711b1f arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings 79c130d88048 arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings 65d88afa8518 arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings fa34450ebcf9 arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings 2d00768d0566 arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings 6d501541ab8b arm64: dts: qcom: sm8450-hdk: Enable the A730 GPU 9999a06044c2 arm64: dts: qcom: sm8550-mtp: Enable the A740 GPU 1c8862cd1be0 arm64: dts: qcom: sm8550-qrd: Enable the A740 GPU db2dd74a4321 arm64: dts: qcom: sm8550: Add GPU nodes 41411e46e180 arm64: dts: qcom: sm8450: Add GPU nodes 67082abed4d1 arm64: dts: qcom: msm8939: Make blsp_dma controlled-remotely b0768548dacf arm64: dts: qcom: msm8916: Make blsp_dma controlled-remotely e529c8cd00c4 arm64: dts: qcom: msm8939: Add clock-frequency for broadcast timer dc95d696633b arm64: dts: qcom: Add missing vio-supply for AW2013 ce476167f046 arm64: dts: qcom: ipq6018: Add QUP5 SPI node 4723cf41be1a arm64: dts: qcom: ipq6018: Add remaining QUP UART node af3ecf0ef5eb Merge branch '20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com' into clk-for-6.8 eeb32e2a4dbd dt-bindings: clock: Update the videocc resets for sm8150 c591d3616c87 arm64: dts: qcom: qrb4210-rb2: Enable MPSS and Wi-Fi 479632ff42dd arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration 4c12613ce6e0 ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name e55cb89e6ef8 ARM: dts: imx25: Remove unneeded keypad properties 610b835be6b9 dt-bindings: net: marvell,orion-mdio: Drop "reg" sizes schema 5605354f949e arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default bb83d09752aa arm64: dts: imx8qxp: Add VPU subsystem file 11f5b7454c94 arm64: dts: imx8qxp-mek: Move port under USB connector f6d6c203902d arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup 643674137f59 dt-bindings: PCI: qcom: Document the SM8650 PCIe Controller ddec040496f1 dt-bindings: PCI: dwc: rockchip: Document optional PCIe reference clock input 2d8a490fd767 dt-bindings: PCI: qcom: Correct reset-names property 2bdefbbe9381 dt-bindings: PCI: qcom: Correct clocks for SM8150 01ce80af6cc2 dt-bindings: PCI: qcom: Correct clocks for SC8180x 9c60f1faccc9 dt-bindings: PCI: qcom: Adjust iommu-map for different SoC c78e4dd9c7c0 arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou 146cf4124863 arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma 26575df71b2d arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts 93c2098cfa35 ARM: dts: ux500-href: Switch HREF520 to AB8505 488dc522177c ARM: dts: ux500-href: Push AB8500 config out 7acade644174 ARM: dts: ux500-href: Push AB8500 inclusion to the top 0043c908a991 dt-bindings: connector: usb: add accessory mode description 7b7f80d863a5 arm64: dts: rockchip: Add vop on rk3588 ef9ea9ea51ca arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode a843a4a028e7 arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode 83869275890f arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode 237d1d3aa847 arm64: dts: ti: k3-am6*: Add additional regs for DMA components 6540bf190683 arm64: dts: ti: k3-j7*: Add additional regs for DMA components f584859d0f96 arm64: dts: ti: k3-am65: Add additional regs for DMA components e76881a36a46 arm64: dts: cn913x: add device trees for COM Express boards a57b87e79272 dt-bindings: arm64: add Marvell COM Express boards 22b670935a1f arm64: dts: armada-3720-turris-mox: set irq type for RTC 6b8494ce5492 ARM64: dts: Add special compatibles for the Turris Mox 8fcbbd77bc4f ARM64: dts: marvell: Fix some common switch mistakes 61b4fbe68e70 ARM: dts: marvell: make dts use gpio-fan matrix instead of array 1a025bb583e1 ARM: dts: marvell: Fix some common switch mistakes 283f9ebb847c dt-bindings: serial: Add a new compatible string for UMS9620 42414ddb491a dt-bindings: serial: imx: Properly describe the i.MX1 interrupts a5b226724ae1 dt-bindings: usb: qcom,dwc3: Add X1E80100 binding a94c79572ac2 dt-bindings: usb: Document WCD939x USB SubSystem Altmode/Analog Audio Switch 6c2112d5f3f3 arm64: dts: qcom: qrb5165-rb5: use u16 for DP altmode svid 79493bc9fc10 dt-bindings: connector: usb: add altmodes description a98f9ad936ee dt-bindings: usb: nxp,ptn5110: Fix typos in the title da44f4e15545 dt-bindings: usb: genesys,gl850g: Document 'peer-hub' c32fd07e4010 dt-bindings: nvmem: add new stm32mp25 compatible for stm32-romem cc8835249ffb ARM: dts: stm32: add dcmipp support to stm32mp135 dc483bc0495b dt-bindings: gnss: u-blox: add "reset-gpios" binding 82239f64506f dt-bindings: iommu: rockchip: Add Rockchip RK3588 b10f7d79bc86 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net e39b04bbed6e Merge branch 'icc-qcm2290' into icc-next c95f389c0366 Merge branch 'icc-sm6115' into icc-next b1f1b32e611b dt-bindings: PCI: rcar-pci-host: Add optional regulators 51eab76bc15c arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box 8f65017d5eb4 dt-bindings: arm: sunxi: document Transpeed 8K618-T board name a043657dff28 dt-bindings: vendor-prefixes: add Transpeed b9b13eec182f arm64: dts: st: add bsec support to stm32mp25 4ba9da13226a ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15 3cd8f921b287 ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles 9d7cd7004fbc dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles 3409584c8b1b ARM: dts: stm32: minor whitespace cleanup around '=' 46d3a566ba35 regulator: dt-bindings: qcom,rpmh: add compatible for pm8010 b876feae34ef ASoC: dt-bindings: audio-graph-port: Document new DAI link flags playback-only/capture-only b0c246496fbc dt-bindings: display: msm: dp: declare compatible string for sm8150 363bcab6054e scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string 3d1e051b5db8 arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector ef545aff5ca3 arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector 13069c168986 arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description c92840a54a7a arm64: dts: imx8mp-venice: Fix USB connector description d0235ca7db0f arm64: dts: imx8mp-verdin: Fix USB connector description 8e6a721ca452 arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node 7662ace2b978 arm64: dts: imx8mn-evk: Move port under USB connector 92576b82f349 arm64: dts: imx8mm-evk: Move port under USB connector 91c629656840 arm64: dts: freescale: introduce dimonoff-gateway-evk board 8b75c148251b dt-bindings: arm: fsl: add Dimonoff gateway EVK board 192ca710eafd dt-bindings: vendor-prefixes: add dimonoff edc62a2939e3 arm64: dts: imx8m*-tqma8m*: Add chassis-type d35e9fd630d7 arm64: dts: imx8mn-beacon: Support overdrive mode a684f6ef9a40 arm64: dts: imx8mn: Enable Overdrive mode 0c6ce8fb001d arm64: dts: imx8mm-beacon: Enable overdrive mode 42e3d3eaa3cb arm64: dts: imx8mm: Add optional overdrive DTSI f9b749293626 arm64: dts: imx8mm: Reduce GPU to nominal speed aadc35d489bd arm64: dts: imx93: Fix the micfil clock-names entries f8b732c140f6 ARM: dts: imx23/28: Fix the DMA controller node name 9697ec153a9c ARM: dts: imx23-sansa: Use preferred i2c-gpios properties 62875ee7373e ARM: dts: imx27-apf27dev: Fix LED name 6bd0d6d0fb3d ARM: dts: imx25/27: Pass timing0 3cd4341f361d ARM: dts: imx25: Fix the iim compatible string 52eef6a12e21 arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support b0f009ddef83 arm64: dts: exynos: google: Add initial Google gs101 SoC support 7932b36aab04 dt-bindings: arm: google: Add bindings for Google ARM platforms c439b1ecd46b dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings 5114ddf2754e dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes 5142777cc846 arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control 9c5b72f0dbf7 arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces c20cd1060c83 arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities d1702886b9b1 arm64: dts: renesas: r9a08g045: Add Ethernet nodes c8bc29914258 arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node 2ac19b878bcd arm64: zynqmp: Add missing destination mailbox compatible bfda609d3986 arm64: zynqmp: Fix clock node name in kv260 cards bf79a715a44c arm64: zynqmp: Move fixed clock to / for kv260 067130bf35dd dt-bindings: soc: Add new board description for MicroBlaze V 3909199b5365 dt-bindings: soc: xilinx: Move xilinx.yaml from arm to soc 5a30f0c409d5 arm64: xilinx: Remove address/size-cells from gem nodes c7afa96873c9 arm64: xilinx: Remove address/size-cells from flash node e3a99f7f8d11 arm64: xilinx: Put ethernet phys to mdio node 6f4a9a0c8df9 arm64: xilinx: Remove mt25qu512a compatible string from SOM e3823e6a85e8 arm64: xilinx: Use lower case for partition address ee878ab978b7 arm64: xilinx: Do not use '_' in DT node names edb56e5ac871 riscv: dts: starfive: Enable SDIO wifi on JH7100 boards 738fd2fd6271 riscv: dts: starfive: Enable SD-card on JH7100 boards 4a3456d5f756 riscv: dts: starfive: Add JH7100 MMC nodes 0b98a998f256 riscv: dts: starfive: Add pool for coherent DMA memory on JH7100 boards b7e59570a83e riscv: dts: starfive: Add JH7100 cache controller 0e3644417255 riscv: dts: starfive: Mark the JH7100 as having non-coherent DMAs 2ce3980ca0ba riscv: dts: starfive: Group tuples in interrupt properties 21bb4608c1f4 arm64: dts: ti: k3-am62-main: Add GPU device node 21dbc3bb6085 dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance 0a5288800340 dt-bindings: rockchip,vop2: Add more endpoint definition 689213783aed dt-bindings: display: vop2: Add rk3588 support d06f02a431a5 dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance a67732e07f79 arm64: dts: fsd: Add MFC related DT enteries a8f325704092 arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode c33d48e723e9 arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode 411f344456e4 arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs e88109a7ea70 arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC 8203df16463f arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC 12693cd3a151 arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs 022683d6bab2 arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs b13637076b0a arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs 073920a8e469 spi: dw: Remove Intel Thunder Bay SOC support 853b38b4ccbe dt-bindings: media: s5p-mfc: Add mfcv12 variant af1444135df0 dt-bindings: soc: rockchip: add rk3588 vop/vo syscon ea9d3ade1f63 media: dt-bindings: Add OmniVision OV64A40 eac07152e0b8 media: dt-bindings: media: imx335: Add supply bindings 37535c00a2ec media: dt-bindings: gc0308: add binding 9be8a81b5d55 media: dt-bindings: ov8856: decouple lanes and link frequency from driver e78a33d58798 media: dt-bindings: alvium: add document YAML binding 123e53dddda5 dt-bindings: vendor-prefixes: Add prefix alliedvision 5367c47d39ee media: dt-bindings: ak7375: Add ak7345 support 33368f1c353f dt-bindings: mfd: pm8008: Clean up example node names 2ab5a6b315e7 dt-bindings: leds: qcom,spmi-flash-led: Fix example node name fa6a05463677 dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints 44e89edff478 dt-bindings: leds: awinic,aw200xx: Add AW20108 device 6cd025d35790 dt-bindings: leds: aw200xx: Remove property "awinic,display-rows" 65b3a1cec5b9 dt-bindings: leds: aw200xx: Introduce optional enable-gpios property 48e46bb513fb dt-bindings: leds: Add Allwinner A100 LED controller 193b43eae00d dt-bindings: leds: Fix JSON pointer in max-brightness ac28e493721a ARM: dts: imx25: Move usbphy nodes out of simple-bus 90f8840e451d ARM: dts: imx1: Use 'bus' for AIPI bus dfc79426f635 ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus 92c19f27621f ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus 09cddc0d2c3d ARM: dts: imx27: Use 'bus' for EMI bus e7cd1893e9ea ARM: dts: imx27: Use 'bus' for AIPI bus 81e952ba68c6 media: dt-bindings: media: i2c: Add bindings for TW9900 2ed7758d7c0a dt-bindings: vendor-prefixes: Add techwell vendor prefix 9b5febaeea2a arm64: dts: freescale: add fsl-lx2160a-mblx2160a board c763b70a3ecc dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards 6c6fc780325f ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix 2571ab1025eb ARM: dts: imx1: Fix sram node c64c46277345 ARM: dts: imx27: Fix sram node 4606862f29a7 ARM: dts: imx: Use flash@0,0 pattern e9c196aff7af ARM: dts: imx25/27-eukrea: Fix RTC node name 34087a021485 ARM: dts: imx25-pdk: Pass #sound-dai-cells f91e9208f059 ARM: dts: imx25: Pass I2C clock-names property cb93e178f443 arm64: dts: freescale: imx93: add i3c1 and i3c2 3b2d451cf59f arm64: dts: ls1012a: Remove big-endian from thermal 25e47251c772 dt-bindings: input: microchip,cap11xx: add advanced sensitivity settings a0fb1bc7fd22 Merge tag 'exynos-drm-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next aae3e1a63026 dt-bindings: riscv: add Zfa ISA extension description ab9eea090f24 dt-bindings: riscv: add Zvfh[min] ISA extension description 7a64028da27c dt-bindings: riscv: add Zihintntl ISA extension description f4789213e5b6 dt-bindings: riscv: add Zfh[min] ISA extensions description c5de05064f79 dt-bindings: riscv: add vector crypto ISA extensions description 215c236fe6da dt-bindings: riscv: add scalar crypto ISA extensions description 1a96ef0c118a Merge tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 6dbce6382acc Merge tag 'pef2256-framer' into devel 1c566bdd0e0f dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer 0e2e3f19a42d arm64: dts: rockchip: Add Anbernic RG351V aa1c981f085f arm64: dts: rockchip: Split RG351M from Odroid Go Advance 5985d0436d7f dt-bindings: arm: rockchip: Add Anbernic RG351V dddd8bf614e2 arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards e79626358af1 arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards c2bbb4cb37ce arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30 5df2cd229ef2 arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328 773747ea9224 arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368 c47780f2190d arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399 0e5a28940713 arm64: dts: rockchip: make dts use gpio-fan matrix instead of array 51d3d03836a0 arm64: dts: rockchip: add gpio alias for gpio dt nodes 5fcf2d67aa35 arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU 80e922961b8e arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi 8f3fbd13ee16 arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi 15b3dffcbe21 arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi 095c6f3ed2af arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi 5dc789289ead arm64: dts: rockchip: add Theobroma Jaguar SBC bc75d639d8bd dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC 3c240c87c027 arm64: dts: rockchip: Add Powkiddy X55 2496d275584a dt-bindings: arm: rockchip: Add Powkiddy X55 517f4adf026d arm64: dts: rockchip: add USB3 host to rock-5a d474a82f6b8f arm64: dts: rockchip: add USB3 host to rock-5b 4bf4fdf576e0 arm64: dts: rockchip: add missing tx/rx-fifo-depth for rk3328 gmac 56e0ff652ec1 arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s 36bdcd2e79dd ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin bd117185d559 ARM: dts: rockchip: fix rk3036 hdmi ports node 2127f8eafedb dt-bindings: clock: google,gs101: fix incorrect numbering and DGB suffix fff73dbf51fc dt-bindings: soc: samsung: usi: add google,gs101-usi compatible 37ffa8542576 dt-bindings: serial: samsung: Make samsung,uart-fifosize a required property fd8ed4626aeb dt-bindings: serial: samsung: Add google-gs101-uart compatible 33bfe5e1dc68 dt-bindings: watchdog: Document Google gs101 watchdog bindings e6381c01b68b riscv: dts: thead: Enable LicheePi 4A eMMC and microSD 3bd0505c030a riscv: dts: thead: Enable BeagleV Ahead eMMC and microSD a53de85228bf riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock fd1214b13ed4 ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node 5d2956b92dea dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle 402b4259739c dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S 150ddb24b2f0 Merge tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next 64011b700499 dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU a5ab14d25e79 dt-bindings: arm-smmu: Add compatible for X1E80100 SoC aaa9819e17c5 dt-bindings: iommu: arm,smmu: document the SM8650 System MMU c04ccbbeb58a dt-bindings: iommu: arm,smmu: document clocks for the SM8350 GPU SMMU b73f681e020f arm64: dts: juno: Align thermal zone names with bindings 8762e182cc34 dt-bindings: hwmon: Add lltc ltc4286 driver bindings 7711cd743748 Merge tag 'exynos-drm-next-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next 0c9c816dddb4 Backmerge tag 'v6.7-rc5' into drm-next cc330eac5dd3 dt-bindings: iio: humidity: Add TI HDC302x support 07a88600291a dt-bindings: iio: light: add ltr390 a803f8c65ec8 dt-bindings: iio: pressure: add honeywell,hsc030 49600f0eeb26 dt-bindings: iio: temperature: add MLX90635 device 5f69a9e8d3dd dt-bindings: hwmon: Increase max number of io-channels 565f404ae838 dt-bindings: hwmon: Add mps mp5990 driver bindings ad5cba1ee29a ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8650 LPASS WSA 880126e66fb3 ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8650 LPASS VA 19ed8a218bd9 ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8650 LPASS TX 322423704418 ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8650 LPASS RX f09397ff6cbf dt-bindings: dma: Add dma-channel-mask to nvidia,tegra210-adma 6263d2ffbb0f dt-bindings: dma: sf-pdma: add new compatible name 7581e8bd108d arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node de53c9a33f27 arm64: dts: mediatek: mt8195: Add SVS node and reduce LVTS_AP iospace 53ceb33cc2de arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs d305525393a4 arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes d4dbd2b56a9f arm64: dts: mediatek: mt8186: Fix alias prefix for ovl_2l0 209e23166717 arm64: dts: mt6358: Drop bogus "regulator-fixed" compatible properties b5aaf3dc3cc4 arm64: dts: mt8183: kukui-jacuzzi: Drop bogus anx7625 panel_flag property aef30bad7a04 arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile c8d764a0bbc6 dt-bindings: soc: mediatek: pwrap: Modify compatible for MT8188 1b35e3cf8066 dt-bindings: arm: mediatek: Add mt8188 pericfg compatible 7e4914880550 dt-bindings: arm: Add compatible for MediaTek MT8188 c4c85ca7297e arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes e7300ae6b913 dt-bindings: display: mediatek: dsi: add compatible for MediaTek MT8195 cebba0dd1a01 arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators 8ac8be12ac45 dt-bindings: arm: mediatek: convert audsys and mt2701-afe-pcm to yaml 275042f3fe7b arm64: dts: mediatek: mt8195: add MDP3 nodes aba1f17e7acc arm64: dts: mediatek: mt8195: revise VDOSYS RDMA node name 7032d5f144c2 arm64: dts: mediatek: mt8183: correct MDP3 DMA-related nodes 22bae315e031 dt-bindings: display: mediatek: padding: add compatible for MT8195 751c1a1076cb dt-bindings: display: mediatek: split: add compatible for MT8195 e2f195c9941b dt-bindings: display: mediatek: ovl: add compatible for MT8195 98aa994aefee dt-bindings: display: mediatek: merge: add compatible for MT8195 6f5d6cbaa3f9 dt-bindings: display: mediatek: color: add compatible for MT8195 ef86984ae659 dt-bindings: display: mediatek: aal: add compatible for MT8195 8f6efe19695a dt-bindings: media: mediatek: mdp3: add component TDSHP for MT8195 f3a2d9b01651 dt-bindings: media: mediatek: mdp3: add component TCC for MT8195 9952a02bb5ee dt-bindings: media: mediatek: mdp3: add component STITCH for MT8195 6c49acbc4134 dt-bindings: media: mediatek: mdp3: add component HDR for MT8195 d6fdbfb3b4ad dt-bindings: media: mediatek: mdp3: add component FG for MT8195 a7d6e829425b dt-bindings: media: mediatek: mdp3: add compatible for MT8195 WROT 7db0370c2d66 dt-bindings: media: mediatek: mdp3: add compatible for MT8195 RSZ 5620ceb8b6ca dt-bindings: media: mediatek: mdp3: add config for MT8195 RDMA 8f056e0ef45c dt-bindings: media: mediatek: mdp3: merge the indentical RDMA under display c2d8940ef6fd dt-bindings: media: mediatek: mdp3: correct RDMA and WROT node with generic names 4347ab16a815 media: dt-bindings: mediatek: Add phandle to mediatek,scp on MDP3 RDMA e14664bd10f6 arm64: dts: mediatek: mt8195-cherry: Assign sram supply to MFG1 pd 0561502a0693 arm64: dts: mediatek: mt8195-cherry: Add MFG0 domain supply 08b52bb4b076 dt-bindings: reset: mt8188: Add VDOSYS reset control bits 10fbcb9df4e2 dt-bindings: arm: mediatek: Add compatible for MT8188 88c996595db3 dt-bindings: display: mediatek: padding: Add MT8188 ca5643fef42b dt-bindings: display: mediatek: merge: Add compatible for MT8188 ae3b78a94c61 dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188 744464b66c7e dt-bindings: display: mediatek: ethdr: Add compatible for MT8188 01b1569a2d88 dt-bindings: thermal: convert Mediatek Thermal to the json-schema 90d08ec14e3c arm64: dts: mt8183: Add jacuzzi pico/pico6 board 5df3f176b5bf dt-bindings: arm64: mediatek: Add mt8183-kukui-jacuzzi-pico 281ab3bf124c arm64: dts: mt8183: Add jacuzzi makomo board 52cfc0fd5dd9 dt-bindings: arm64: mediatek: Add mt8183-kukui-jacuzzi-makomo 19dd875d8e0a arm64: dts: mt8183: Add kukui katsu board b8dd2f8c3e1c dt-bindings: arm64: mediatek: Add mt8183-kukui-katsu 9a6a916f0bc6 arm64: dts: mediatek: Move MT6358 PMIC interrupts to MT8183 boards 3f27ea46dc3d arm64: dts: mediatek: Use interrupts-extended where possible ad0c69fd2fa3 arm64: dts: mediatek: mt8173: Use interrupts-extended where possible c82e8139aeaa arm64: dts: mediatek: mt8183: Use interrupts-extended where possible d8a485fe96f7 dt-bindings: soc: mediatek: add mt8186 and mt8195 svs dt-bindings e66d619c0c3a dt-bindings: arm: mediatek: mmsys: Add VPPSYS compatible for MT8188 5e6b938fc74f arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones e90ef555e054 arm64: dts: mediatek: mt8183: Add decoder 0f0ccec6cc8d arm64: dts: mediatek: mt8173: Drop VDEC_SYS reg from decoder b6aed11d9548 arm64: dts: mediatek: cherry: Add platform thermal configuration 86760b83d52b dt-bindings: display: simple: Add AUO G156HAN04.0 LVDS display a9ddc30ef584 dt-bindings: display: panel: Add Ilitek ili9805 panel controller defac25462fb dt-bindings: display: st7701: Add Anbernic RG-ARC panel 336bc0e68db2 dt-bindings: display: panel: add Fascontek FS035VG158 panel 955ce81826fb dt-bindings: vendor-prefixes: Add fascontek 752a79b7aaef dt-bindings: display: panel: Clean up leadtek,ltk035c5444t properties 770aea203c16 Merge 6.7-rc5 into tty-next 34ef5edc5b88 Merge 6.7-rc5 into usb-next 621073890e71 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 bf94b2d5359e arm64: dts: exynos: add minimal support for exynosautov920 sadk board e9fd8cf1d2d8 arm64: dts: exynos: add initial support for exynosautov920 SoC d0863d30608a dt-bindings: pinctrl: samsung: correct ExynosAutov920 wake-up compatibles 9bdf0db8ae4b dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum 5b54324e6d5b dt-bindings: dma: Drop undocumented examples e2fd1a08fd82 Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next a04c2351b389 dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101 9b3c118b3d19 dt-bindings: clock: Add Google gs101 clock management unit bindings d97b5e938286 dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible 6a5a439c0701 dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible 10422d721886 dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible 3a5cb767f670 media: dt-bindings: media: rkisp1: Fix the port description for the parallel interface 1da803cb7af8 arm64: dts: qcom: qcm6490-fairphone-fp5: Enable WiFi 8da528961e4e arm64: dts: qcom: qcm6490-fairphone-fp5: Enable various remoteprocs e6fa65e6d152 arm64: dts: qcom: sc7280: Add CDSP node fc9753f721c5 arm64: dts: qcom: sc7280: Add ADSP node c8ee1d58df76 arm64: dts: qcom: sc7280: Use WPSS PAS instead of PIL 52f7c413fda4 arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS 4df3a7b5d504 arm64: dts: qcom: msm8953: Set initial address for memory 423afe7e3dcb ARM: dts: qcom: msm8226: Add GPU bba409f9c339 ARM: dts: qcom: Disable pm8941 & pm8226 smbb charger by default 7e9db953a623 arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board 4e3613f89c7f arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc d8bfc2581200 dt-bindings: input: gpio-mouse: Convert to json-schema 2691fb7a0b13 dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml 2dc455b73efa ARM: dts: samsung: exynos4210-i9100: Add accelerometer node 0fab2792a476 ARM: dts: samsung: exynos4210-i9100: Add node for touch keys 7ea4a30a8fd6 ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12 4cee9945012b ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node e76f84dfaedb arm64: dts: qcom: sm8650: Add DisplayPort device nodes 2cfe9148e611 arm64: dts: qcom: pm8550: drop PWM address/size cells 49e3d2a63a49 dt-bindings: display: mediatek: padding: Add MT8188 8c1a5538e89b dt-bindings: display: mediatek: merge: Add compatible for MT8188 29025812d6c3 dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries 3e60d5b58b7d dt-bindings: gpu: samsung-scaler: constrain iommus and power-domains 1d6aee346b02 dt-bindings: gpu: samsung-g2d: constrain iommus and power-domains d4a84a84e922 dt-bindings: gpu: samsung: constrain clocks in top-level properties 1e0b14dc8237 dt-bindings: gpu: samsung: re-order entries to match coding convention ba50ff463c59 dt-bindings: gpu: samsung-rotator: drop redundant quotes 1a3c1bf5b141 dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188 0a16c7e2c414 dt-bindings: display: mediatek: ethdr: Add compatible for MT8188 925f69a6cc7d dt-bindings: serial: qcom,msm-uartdm: Vote for shared resources 44f4478aa927 dt-bindings: serial: snps-dw-apb-uart: include rs485 schema fad4b52a0fdb arm64: dts: hisilicon: hikey970-pmic: clean up SPMI node 051c12eb5d46 arm64: dts: hisilicon: hikey970-pmic: fix regulator cells properties e567127bd619 dt-bindings: hisilicon: Merge hi3620-clock into hisilicon,sysctrl binding 4b823f7042ef arm64: dts: qcom: x1e80100: Add Compute Reference Device f51679f0f817 arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts ca121fc146b2 dt-bindings: arm: qcom: Document X1E80100 SoC and boards c53c3b8c12a4 dt-bindings: arm: cpus: Add qcom,oryon compatible aa432318faa9 Merge branch 'icc-x1e80100' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8 9eba2f2fb214 Merge branch '20231205061002.30759-4-quic_sibis@quicinc.com' into arm64-for-6.8 f213e67c84b7 Merge branch '20231205061002.30759-4-quic_sibis@quicinc.com' into clk-for-6.8 ecc521e21905 dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100 079af735ef3c dt-bindings: clock: qcom: Add X1E80100 GCC clocks 8f4495322f78 arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers 02b73ff63440 arm64: dts: qcom: sm8650: add Soundwire controllers e6679602ac09 arm64: dts: qcom: sm8650: add ADSP audio codec macros 5c0a5d9640c3 arm64: dts: qcom: sm8650: add LPASS LPI pin controller 7f6211cc8e63 arm64: dts: qcom: sm8650: add ADSP GPR b72a9e98977b arm64: dts: qcom: sm8650-qrd: enable IPA 13bdc41575ab arm64: dts: qcom: sm8650: add IPA information 0fd767d395a1 arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes d68c8f7f237a arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes 900a28b939d2 arm64: dts: qcom: sm8650: add interconnect dependent device nodes ff01973261d0 arm64: dts: qcom: sm8650: add initial SM8650 QRD dts 185ce15a620b arm64: dts: qcom: sm8650: add initial SM8650 MTP dts 487b5dde17e2 arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable 61ff00c8e1de arm64: dts: qcom: add initial SM8650 dtsi 7266e49a2f3e dt-bindings: arm: qcom: document SM8650 and the reference boards 34a104c65fa9 Merge branch 'icc-sm8650' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8 dc9c79dc36cc Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8 482bf7559678 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 89cdcbe73e3a dt-bindings: display: msm: dp-controller: document SM8650 compatible 6457d6362b66 docs: dt-bindings: add DTS Coding Style document 17bd76b0dcba ARM: dts: rockchip: add gpio alias for gpio dt nodes 1e3bf6cdb555 dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example ebf62e0e08ff dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding ff778a37f71a dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference 60bfc8c9aef9 dt-bindings: firmware: qcom,scm: Allow interconnect for everyone ae3daad140cd arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree 3ab4a6461f9d dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa) a4229e4b1bf7 arm64: dts: qcom: sm8550-qrd: enable IPA 0b02bd1a7f8b arm64: dts: qcom: sm8550: add IPA information 1d704f347212 dt-bindings: firmware: qcom,scm: document SCM on X1E80100 SoCs a07e2c07074c dt-bindings: arm: qcom-soc: extend pattern matching for X1E80100 SoC 190053cb1ce8 arm64: dts: qcom: minor whitespace cleanup around '=' e5d9eb69d255 ARM: dts: qcom: minor whitespace cleanup around '=' a12829c0d5ea arm64: dts: qcom: ipq8074: Add QUP4 SPI node 81c5f29af493 arm64: dts: qcom: qdu1000: Add ECPRI clock controller 7f8d2a160503 Merge branch '20231123064735.2979802-2-quic_imrashai@quicinc.com' into clk-for-6.8 a7b1e49f140b dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000 0d8365b85a68 ARM: dts: qcom: sdx55: fix USB wakeup interrupt types 4e5dc5d2a1e5 arm64: dts: qcom: sm8550: fix USB wakeup interrupt types b0dd9226dd63 arm64: dts: qcom: sm8150: fix USB wakeup interrupt types 301d240b276b arm64: dts: qcom: sm6375: fix USB wakeup interrupt types bcfa8e3ed274 arm64: dts: qcom: sdm845: fix USB wakeup interrupt types 20a6fe5d28b2 arm64: dts: qcom: sdm670: fix USB wakeup interrupt types d2c7cfd6cfc3 arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types 6f29d799b7cf arm64: dts: qcom: sc7280: fix usb_2 wakeup interrupt types ca84d4480b44 arm64: dts: qcom: sc7280: fix usb_1 wakeup interrupt types 096085135fda arm64: dts: qcom: sc7180: fix USB wakeup interrupt types 6c1f003cc9a1 arm64: dts: qcom: sa8775p: fix USB wakeup interrupt types 45bd09d633c8 arm64: dts: qcom: msm8916-longcheer-l8150: Add battery and charger 195857e6f299 arm64: dts: qcom: pm8916: Add BMS and charger 6caacf1f1bd3 arm64: dts: qcom: sc7280: Add 0xac Adreno speed bin 3ddcb3a31e24 arm64: dts: qcom: sc7280: Mark Adreno SMMU as DMA coherent b8bf84b9efc0 arm64: dts: qcom: sc7280: Fix up GPU SIDs 0830942e59a4 arm64: dts: qcom: sc7280: Add ZAP shader support 6a2b85d201c9 dt-bindings: arm: qcom-soc: extend pattern for matching existing SoCs ddd782c9e1e9 dt-bindings: cache: qcom,llcc: Add X1E80100 compatible 573141bcc2f7 arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support 93789523f679 arm64: dts: qcom: Add USB3 and PHY support on SDX75 ddc8552a97e0 arm64: dts: qcom: Add interconnect nodes for SDX75 2f6480d75792 arm64: dts: qcom: sm8350: Fix remoteproc interrupt type 22ab1e4b96e5 arm64: dts: qcom: pm8350k: Remove hanging whitespace 648dd7cb906d arm64: dts: qcom: sm8350: Fix DMA0 address aa5e755d7246 dt-bindings: iio: adc: qcom: Add Qualcomm smb139x aee24a669374 arm64: dts: qcom: sc8180x: align APSS with bindings c51b52a3c7aa arm64: dts: qcom: sm6375-pdx225: add fixed touchscreen AVDD regulator 714c2d01cb79 arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controller 869ed2bf0b06 arm64: dts: qcom: sm6115: align mem timer size cells with bindings 5b01a3bc4e38 arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs abcbd3630645 arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOs 5281b1e2c756 arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOs dbf927ecfde3 arm64: dts: qcom: sdm845: correct Soundwire node name 27d49e38f5d4 arm64: dts: qcom: sdm845-db845c: correct LED panic indicator 85591f38ba27 arm64: dts: qcom: qrb5165-rb5: correct LED panic indicator 65b61add6d70 arm64: dts: qcom: sm8250: Add wakeup-source to usb_1 and usb_2 343c9084fd53 arm64: dts: qcom: sdm850-lenovo-yoga: Add wakeup-sources eb9d72ac20a4 arm64: dts: qcom: sa8775p-ride: enable pmm8654au_0_pon_resin e4828a6315b4 arm64: dts: qcom: sm8350: move DPU opp-table to its node cfa2fb4b7f5b arm64: dts: qcom: sc8280xp-x13s: drop sound-dai-cells from eDisplayPort 927e9926b48f arm64: dts: qcom: sc8180x-primus: drop sound-dai-cells from eDisplayPort ca8a02834a8f arm64: dts: qcom: sm8250: correct Soundwire node name 682a341c0cdc arm64: dts: qcom: sc8280xp: correct Soundwire node name 13f2dbc0a9cb arm64: dts: qcom: qdu1000-idp: drop unused LLCC multi-ch-bit-off 6cda67d14000 arm64: dts: qcom: qdu1000: correct LLCC reg entries 208a56e344a2 arm64: dts: qcom: sm8450: fix soundwire controllers node name c7bee631d3e9 arm64: dts: qcom: sm8550: fix soundwire controllers node name 255ca7c95406 Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into clk-for-6.8 52721c372031 dt-bindings: clock: qcom: Document the SM8650 RPMH Clock Controller a8430c36d8bc dt-bindings: clock: qcom: document the SM8650 GPU Clock Controller e39f08bf115a dt-bindings: clock: qcom: document the SM8650 Display Clock Controller 076aa9fc05f3 dt-bindings: clock: qcom: document the SM8650 General Clock Controller abeff2c9f476 dt-bindings: clock: qcom: document the SM8650 TCSR Clock Controller 3714369ceebb dt-bindings: cache: qcom,llcc: Document the SM8650 Last Level Cache Controller cb0f1e272d52 dt-bindings: clock: qcom,gcc-msm8939: Add CSI2 related clocks 7ee4127b7a3f arm64: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp d380ef670205 Merge branch '20231026105345.3376-3-bryan.odonoghue@linaro.org' into arm64-for-6.8 30a292de3f9a Merge branch '20231026105345.3376-3-bryan.odonoghue@linaro.org' into clk-for-6.8 f007e023cbd5 dt-bindings: clock: Add SC8280XP CAMCC aec8967c6dce dt-bindings: clock: Use gcc.yaml for common clock properties 7c1eb93bd0d3 dt-bindings: clock: qcom,gcc-ipq6018: split to separate schema b6364ec8f82d dt-bindings: arm: qcom,ids: Add SoC ID for SM8650 3f482ad7991e arm64: dts: qcom: sm8550: Enable download mode register write fe077e894545 arm64: dts: qcom: sm8350: Add TCSR halt register space 956699ec82d4 arm64: dts: qcom: sm8250: Add TCSR halt register space e0bd046de230 arm64: dts: qcom: ipq5018: add few more reserved memory regions c38c43d3b995 arm64: dts: qcom: ipq5332: add missing properties to the GPIO LED node 0390c1ee5e11 arm64: dts: qcom: ipq9574: enable GPIO based LED 2f9b91c0cf6d arm64: dts: qcom: qrb2210-rb1: use USB host mode 2196010939c0 dt-bindings: firmware: qcom,scm: document SM8650 SCM Firmware Interface ae8a176c474a dt-bindings: soc: qcom: pmic-glink: document SM8650 compatible c3cb68af1e5d dt-bindings: soc: qcom,aoss-qmp: document the SM8560 Always-On Subsystem side channel a6ea4114f911 dt-bindings: mmc: mtk-sd: add tuning steps related property 30e4bc60ac6d dt-bindings: mfd: ti,am3359-tscadc: Allow dmas property to be optional 5c51588d48df dt-bindings: mfd: qcom,spmi-pmic: Add pm8916 vm-bms and lbc a03962f53dbd dt-bindings: mfd: qcom-spmi-pmic: Document PM8937 PMIC 81a2c830f173 dt-bindings: mfd: qcom,tcsr: Add compatible for sm8250/sm8350 fe50e0fb05fc dt-bindings: mfd: ams,as3711: Convert to json-schema 197c27b6cfaa arm64: dts: fsd: add specific compatibles for Tesla FSD 395fa67b6b72 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 5927c83d20c8 dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD 78e4ed4670d7 dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD c168df69f5a1 dt-bindings: serial: samsung: add specific compatible for Tesla FSD 6dedf66f0e8b dt-bindings: pwm: samsung: add specific compatible for Tesla FSD 457e5d03f14d dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD 4b7a14529669 dt-bindings: mmc: renesas,sdhi: Document RZ/Five SoC a135e0045af7 dt-bindings: mmc: arasan,sdci: Add gate property for Xilinx platforms d0ed6c92c98e dt-bindings: mmc: sdhci-of-dwcmhsc: Add T-Head TH1520 support f7a9df14027b dt-bindings: net: microchip,ksz: document microchip,rmii-clk-internal b81aa4a5992d media: dt-bindings: mediatek: Add phandle to mediatek,scp on MDP3 RDMA b80f939c4051 dt-bindings: iio/adc: qcom,spmi-vadc: clean up examples 44c4f2c40551 dt-bindings: iio/adc: qcom,spmi-vadc: fix example node names c57fab0a68f9 dt-bindings: iio/adc: qcom,spmi-rradc: clean up example f330b6a06a10 dt-bindings: iio/adc: qcom,spmi-iadc: clean up example d089bb38e3f6 dt-bindings: iio/adc: qcom,spmi-iadc: fix example node name d92310a0b805 dt-bindings: iio/adc: qcom,spmi-iadc: fix reg description 6afb70912c0a Merge tag 'renesas-dts-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt 77be7b2ec3d6 arm64: dts: ti: Add verdin am62 mallow board 5fe3785a98a1 dt-bindings: arm: ti: Add verdin am62 mallow board 7bf01a4e3239 ASoC: dt-bindings: fsl,xcvr: Adjust the number of interrupts 568ee5fdf77d dt-bindings: interconnect: Add Qualcomm SM6115 NoC 7549b7adec53 arm64: dts: ti: verdin-am62: Improve spi1 chip-select pinctrl 0b160138fdcc arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name 42aed107725d arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support 766ac2241c85 arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Lower I2C1 frequency bcf7dd5b8b09 arm64: dts: ti: phycore-am64: Add R5F DMA Region and Mailboxes e1dfb1eb87a4 riscv: dts: microchip: add the mpfs' system controller qspi & associated flash 59d2f723c14b dt-bindings: soc: microchip: add a property for system controller flash 4b452a4cfa9e ARM: dts: imx23/28: Remove undocumented "fsl,clkctrl" 485e1601cd25 ARM: dts: bcm2711: Add BCM2711 xHCI support 439353e944b0 dt-bindings: usb: xhci: Add support for BCM2711 4b95e8b40522 ARM: dts: imx28-lwe: Pass device_type to the memory node ea0431aa1757 ARM: dts: imx23/28: Remove unneeded "fsl,mxs-gpio" e63738dd96c8 ARM: dts: imx28-tx28: Pass #sound-dai-cells fc88878c01c0 arm64: dts: imx8mq-phanbell: make dts use gpio-fan matrix instead of array e21fe3809cd3 arm64: dts: freescale: verdin-imx8mp: add support to mallow board a75cfdc4a966 arm64: dts: freescale: verdin-imx8mm: add support to mallow board 3b7bee60295f arm64: dts: imx8mm-venice-gw7: Adjust PCI Ethernet nodes 5241ecb06203 dt-bindings: arm: fsl: add verdin imx8mp mallow board b80ecc880136 dt-bindings: arm: fsl: add verdin imx8mm mallow board ad1ae2498610 arm64: dts: imx8mm: Slow default video_pll1 clock rate 5aa830cec5a3 arm64: dts: imx8mm: Remove video_pll1 clock rate from clk node 110274d03548 arm64: dts: imx8mm: Simplify mipi_dsi clocks 99d898689e0b ARM: dts: imx7s: Add on-chip memory 29d17af3b09b ARM: dts: imx7: add MIPI-DSI support d9c25edf04ae scsi: ufs: dt-bindings: Add msi-parent for UFS MCQ dba1025f17d0 ARM: dts: nxp: Fix some common switch mistakes 4ea7b578957d arm64: dts: freescale: minor whitespace cleanup around '=' dbb52d93894b arm64: dts: imx8dxl-ss-ddr: change ddr_pmu0 compatible 941d70d2ae55 arm64: dts: tqma8mpql: Remove invalid/unused property ec00a410133c arm64: dts: imx8-ss-audio: Remove unexistent'shared-interrupt' 604139ed79f6 arm64: dts: imx93: Remove unexistent 'shared-interrupt' 7a445842e287 arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatible 0c2122b767be arm64: dts: imx8mp-debix-model-a: Use phy-mode 2e9827c5e054 arm64: dts: imx8mm-nitrogen-r2: Fix I2C mux subnode name d1e22a0dfb43 arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names order 6299d7ae35e5 arm64: dts: imx8mm-emcon-avari: Fix gpio-cells 9de3f32f3c7d arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names 6905c613057b arm64: dts: freescale: Add SKOV IMX8MP CPU revB board b20a05f3b464 arm64: dts: imx8mn-var-som-symphony: add vcc supply for PCA9534 a5a6af3c0bdd arm64: dts: freescale: introduce rve-gateway board 83600000758e arm64: dts: freescale: debix-som-a-bmb-08: Add CSI Power Regulators b5e632bcd082 arm64: dts: imx8-apalis: add can power-up delay on ixora board 9804057f0f96 arm64: dts: imx8mn-var-som: add fixed 3.3V regulator for EEPROM e3c93255cfdb arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodes 8357f0b7ae64 arm64: dts: imx8mp: Disable dsp reserved memory by default 3b2b78d127df arm64: dts: imx8mp: Add NPU Node b13969aeeefc arm64: dts: freescale: debix-som: Add heartbeat LED 5c6068a3aecc arm64: dts: freescale: Add dual-channel LVDS overlay for TQMa8MPxL 37dbfb74c066 arm64: dts: imx8mp-venice-gw74xx: remove unecessary propreties in tpm node 12f50b18b3a5 ARM: dts: nxp: minor whitespace cleanup around '=' 7e4a296e0073 ARM: dts: imx7d-colibri-emmc: Add usdhc aliases aac483d2d190 ARM: dts: imx6qdl-colibri: Add usdhc aliases 534d21c04c41 ARM: dts: imx6qdl-apalis: Add usdhc aliases 4105f51d0c63 ARM: dts: nxp: imx7d-pico: add cpu-supply nodes 4a5f36c1120b dt-bindings: arm: Add compatible for SKOV i.MX8MP RevB board 7efe4371f644 dt-bindings: arm: fsl: add RVE gateway board 3c86e357feb0 dt-bindings: vendor-prefixes: add rve 04660a3dbd9f ARM: dts: broadcom: Add BCM63138's high speed UART 2e36ee7e60cd arm64: dts: ti: k3-am62x: Add overlay for IMX219 8478bfdedc00 arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals a361c10e44cc arm64: dts: ti: k3-am62x: Add overlays for OV5640 820399f7bf0f arm64: dts: ti: k3-am62x-sk: Enable camera peripherals 4de948eeb982 arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640 8d6be01e5e7c arm64: dts: ti: k3-am62a-main: Enable CSI2-RX d52951f9d78a arm64: dts: ti: k3-am62-main: Enable CSI2-RX 4d667e27b3fd arm64: dts: ti: k3-am65: Add AM652 dtsi file 3d2161ed0c2b dt-bindings: perf: fsl-imx-ddr: Add i.MX8DXL compatible 189fe310f16e dt-bindings: clock: support i.MX93 ANATOP clock module b44d3f817227 ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx) b654e96c546e dt-bindings: display: simple: add Evervision VGG644804 panel 05a02c1a58e1 dt-bindings: ili9881c: Add Ampire AM8001280G LCD panel 96be0427a528 ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128 18c0b8b47af4 ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128 0191774d40bb ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128 4b6344ed1b32 ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub 3cbab293b053 dt-bindings: arm: rockchip: Add Sonoff iHost afacdf8be4db ARM: dts: rockchip: Add rv1109 SoC ad1e5ad721a5 ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126 fc0ef88ee0a1 ARM: dts: rockchip: Add i2c2 node to rv1126 bf739d2f67ae ARM: dts: rockchip: Serial aliases for rv1126 049605e5080d ARM: dts: rockchip: Add alternate UART pins to rv1126 59e8d345382e ARM: dts: rockchip: Enable GPU for XPI-3128 464bddcf0726 ARM: dts: rockchip: Add GPU node for RK3128 8af06043d850 ARM: dts: rockchip: Add power-controller for RK3128 8f65bb97112e dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel ed2d8407a82d dt-bindings: display: Document Himax HX8394 panel rotation 5319f5062c10 dt-bindings: display: simple: Add boe,bp101wx1-100 panel db09be0ff97b ARM: dts: imx6q-apalis: add can power-up delay on ixora board 31fdbd1cd6c6 dt-bindings: display: msm: document the SM8650 Mobile Display Subsystem 52e16372d1c6 dt-bindings: display: msm: document the SM8650 DPU 258f55b8a6c7 dt-bindings: display: msm-dsi-controller-main: document the SM8650 DSI Controller f06034e33173 dt-bindings: display: msm-dsi-phy-7nm: document the SM8650 DSI PHY e7cafbdafccf dt-bindings: display: msm: Add SDM670 MDSS 58504ed9c645 dt-bindings: display/msm: sdm845-dpu: Describe SDM670 d8b80f6fd0c5 dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible 0c71ce621111 arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name 0895f560a171 arm64: dts: ti: k3-am62a7-sk: Add interrupt support for IO Expander 696f6e8d6176 arm64: dts: ti: k3-am625-verdin: Enable Verdin UART2 145b9a5ffb00 arm64: dts: ti: k3-am62-main: Add gpio-ranges properties 0d95f5e22dde arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level 8ccabbb5322f arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level 4b9d0ee63df8 arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node b64af72b8e7b arm64: dts: ti: k3-j784s4: Add chipid node to wkup_conf bus a70ca898f980 arm64: dts: ti: k3-j721s2: Add chipid node to wkup_conf bus 638e0242808a arm64: dts: ti: k3-j721e: Add chipid node to wkup_conf bus 0b0e18c3dce2 arm64: dts: ti: k3-j7200: Add chipid node to wkup_conf bus 16b21e3cf2ea arm64: dts: ti: k3-am65: Add chipid node to wkup_conf bus ba6541592794 dt-bindings: iio: light: isl76682: Document ISL76682 3678e1e114f2 dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: add X1E80100 LPASS LPI 4854bb4b43e2 dt-bindings: pinctrl: pinctrl-single: add ti,j7200-padconf compatible 062b01e5c736 dt-bindings: iio: light: add support for Vishay VEML6075 3f170ed89d6f dt-bindings: usb: tps6598x: add reset-gpios property 69a424bfd498 dt-bindings: iio/adc: ti,palmas-gpadc: Drop incomplete example 5cf3c6e7327b dt-bindings: adi,ad5791: Add support for controlling RBUF 7a11d1470ed1 dt-bindings: display: bridge: lt8912b: Add power supplies 562bb8392ec6 spi: spl022: fix sleeping in interrupt context 83c535a1ec6b dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure properties 7cb202a1a899 dt-bindings: media: add bindings for stm32 dcmipp fce776c784a0 dt-bindings: media: Add bindings for THine THP7312 ISP 23c5bf41000e dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings e6429afd32f1 dt-bindings: vendor-prefixes: Add prefix for GalaxyCore Inc. d1287a3d111f dt-bindings: gpio: rockchip: add a pattern for gpio hogs e08aefe3ce14 Merge tag 'qcom-dts-for-6.7-2' into arm32-for-6.8 66862cc676b1 ARM: dts: qcom: Add support for HTC One Mini 2 ac27d4b5eaa6 Merge tag 'v6.7-rc4' into media_stage 8a745825682b arm64: dts: qcom: sm6350: Make watchdog bark interrupt edge triggered 4de273b8d5cf arm64: dts: qcom: sc8280xp: Make watchdog bark interrupt edge triggered 94d4ed6b0efb arm64: dts: qcom: sa8775p: Make watchdog bark interrupt edge triggered 9e80723d8b4f arm64: dts: qcom: sm8250: Make watchdog bark interrupt edge triggered ef5fa5d97caa arm64: dts: qcom: sm8150: Make watchdog bark interrupt edge triggered 3879bc4c1c04 arm64: dts: qcom: sdm845: Make watchdog bark interrupt edge triggered 8e7e69e2041a arm64: dts: qcom: sc7280: Make watchdog bark interrupt edge triggered 6584d8b4799e arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered 04f80707bc19 arm64: dts: qcom: sc8180x: drop duplicated PCI iommus property 04597b9d0b6f dt-bindings: arm: qcom: Add HTC One Mini 2 7ff927ff9139 dt-bindings: vendor-prefixes: document HTC Corporation fa70da0426ea arm64: dts: qcom: sm8550: correct TX Soundwire clock ed7e07a029d6 arm64: dts: qcom: sm8450: correct TX Soundwire clock 541ded0776d2 arm64: dts: qcom: sc8180x-primus: Fix HALL_INT polarity 39c752cf5603 arm64: dts: qcom: sc8280xp-crd: fix eDP phy compatible e5319a1187df arm64: dts: qcom: sdm632-fairphone-fp3: Enable LPASS daf6cf6a007f arm64: dts: qcom: msm8916-acer-a1-724: Add notification LED 2a186fbc9370 arm64: dts: qcom: ipq6018: use CPUFreq NVMEM 91d98fe1640a arm64: dts: qcom: msm8939-huawei-kiwi: Add initial device tree 6718a893d987 dt-bindings: arm: qcom: Add Huawei Honor 5X / GR5 (2016) f36c60304a90 arm64: dts: qcom: msm8953: Use non-deprecated qcom,domain in LPASS fa91149122fc arm64: dts: qcom: qrb2210-rb1: add wifi variant property 9862c76b6484 arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller 90510995b456 arm64: dts: qcom: qrb2210-rb1: Set up HDMI f168a1f5fd2a arm64: dts: qcom: qcm2290: Hook up interconnects a66c95bb5052 arm64: dts: qcom: qcm2290: Add display nodes 1b3d99e8ad9d arm64: dts: qcom: sc7280: Add the missing MDSS icc path 463b9cc7faa3 arm64: dts: qcom: sc7180: Add the missing MDSS icc path a2b32f52593b arm64: dts: qcom: sc8280xp: Add QMP handle to RPMh stats 0541077473ea dt-bindings: soc: qcom: stats: Add QMP handle 46fd383def7f arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node and enable usb otg 45ca7aacee21 arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos 9dee357f1ff5 arm64: dts: qcom: msm8939-longcheer-l9100: Add proximity-near-level d6b8367dbb65 arm64: dts: qcom: qrb4210-rb2: Enable bluetooth 9e8fcdbc4d75 arm64: dts: qcom: sm6115: Add UART3 e88a0c4a9117 arm64: dts: qcom: sdm632-fairphone-fp3: Enable WiFi/Bluetooth a808b8c6d7f4 dt-bindings: arm: qcom: Fix html link 004244e4cbd5 arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts 3f55e77ebc86 arm64: dts: qcom: Add base qcm6490 idp board dts 9e08836a864f dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board c538a9224903 arm64: dts: qcom: sm4450-qrd: mark QRD4450 reserved gpios 34764956c2e4 arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support b5fe030e21e0 arm64: dts: qcom: sm4450: add uart console support 76478ce29df3 arm64: dts: qcom: sm4450: Add RPMH and Global clock 52ea11ee57e9 arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node d42f9497ccad arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC 9b98d0a1718e dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks 2417b30e3609 arm64: dts: qcom: msm8953: add SPI interfaces 66dd2b49a0b3 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals 0b651704285a arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMK7325 thermals 8630d7baedf5 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals 959371b1b650 iio: adc: Add PM7325 PMIC7 ADC bindings b1e6472aae24 arm64: dts: qcom: sm8250: Add OPP table support to UFSHC 6aeff20d0bd6 arm64: dts: qcom: sdm845: Add OPP table support to UFSHC e8d1d500097e ARM: dts: qcom: msm8974: Add watchdog node 615027dbbe1d dt-bindings: arm: qcom: drop the IPQ board types ebb3e763ee5b arm64: dts: qcom: ipq5018: enable the CPUFreq support 3ca74e9810cf dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible dcbafe8963f4 ARM: dts: qcom: sdx65: correct SPMI node name 98b030d58c93 ARM: dts: qcom: sdx65: add missing GCC clocks 07a16205d0e0 ARM: dts: qcom: sdx65: correct PCIe EP phy-names fe48cd5331dc dt-bindings: display: msm: Add reg bus and rotator interconnects 8c1892c5f696 dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat 7cfd5769a991 dt-bindings: display/msm: qcom, sm8150-mdss: correct DSI PHY compatible 91abf991ed4a dt-bindings: display/msm: qcom, sm8250-mdss: add DisplayPort controller node c203dee53e38 ARM: dts: rockchip: Enable gmac for XPI-3128 a31102a06882 ARM: dts: rockchip: Add gmac node for RK3128 d02bab784773 dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible 61b6b8e5340b dt-bindings: net: qcom,ipa: document SM8650 compatible a0fa8df10233 Merge tag 'renesas-pinctrl-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel 6c58c6977828 dt-bindings: gpio: modepin: Describe label property 7f00d1c96321 dt-bindings: display: ti: Add support for am62a7 dss 6bed64726635 arm64: dts: ti: k3-am68-sk-base-board: Add alias for MCU CPSW2G f494c9948974 arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG2 devices 403938b5222f arm64: dts: ti: iot2050: Refactor the m.2 and minipcie power pin 45e3b6aa9185 arm64: dts: ti: iot2050: Definitions for runtime pinmuxing b14c51a347fb arm64: dts: ti: iot2050: Drop unused ecap0 PWM 38f52ad2cea9 arm64: dts: ti: iot2050: Re-add aliases a84e54a6c2a0 arm64: dts: ti: k3-am62x-sk-common: Mark mcu gpio and mcu_gpio_intr as reserved 0baa456c51ce arm64: dts: ti: k3-am62p5-sk: Mark mcu gpio and mcu_gpio_intr as reserved 131aadfec025 arm64: dts: ti: k3-am642-evm/sk: Mark mcu_gpio_intr as reserved bbda0d8be30e arm64: dts: ti: k3-am64-main: Fix typo in epwm_tbclk node name 5e8876dba890 arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type fd78a91dedf3 arm64: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes 05614d5b4f00 arm64: dts: ti: minor whitespace cleanup around '=' ca6dff24071e ARM: dts: omap4-embt2ws: Add Bluetooth cff0864e2eea Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2a2ae1545117 dt-bindings: input: gpio-keys: Allow optional dedicated wakeirq aed93474ebc0 Merge patch series "Add Huashan Pi board support" 318917bad2c6 riscv: dts: sophgo: add Huashan Pi board device tree 8a2824be66df riscv: dts: sophgo: add initial CV1812H SoC device tree 3ff295494c04 riscv: dts: sophgo: cv18xx: Add gpio devices dfcd3e4c81d9 riscv: dts: sophgo: Separate compatible specific for CV1800B soc 8c5d4ad957fa dt-bindings: riscv: Add SOPHGO Huashan Pi board compatibles e393d2e6705e dt-bindings: timer: Add SOPHGO CV1812H clint 65cc6be0d442 dt-bindings: interrupt-controller: Add SOPHGO CV1812H plic dce8266bb548 ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device 0f0cee70a881 ARM: dts: omap4-embt2ws: enable 32K clock on WLAN 33dfdcf03832 ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties aa5a9a109405 dt-bindings: power: meson-g12a-power: document ISP power domain a9f86a1f45b5 dt-bindings: marvell: Add Marvell MV88E6060 DSA schema 5024553a10f5 dt-bindings: marvell: Rewrite MV88E6xxx in schema ad4c44e96eec dt-bindings: net: ethernet-switch: Accept special variants 17baedd697fb dt-bindings: net: mvusb: Fix up DSA example 9c7ccdf2dc30 dt-bindings: net: dsa: Require ports or ethernet-ports 8adbf64f3cdd dt-bindings: input: mediatek,pmic-keys: Drop incomplete example cdc098b167e1 dt-bindings: input: sprd,sc27xx-vibrator: Drop incomplete example 0629a76a9d04 dt-bindings: correct white-spaces in examples 2f78b6dd5c42 dt-bindings: reset: hisilicon,hi3660-reset: Drop providers and consumers from example f835598ebf60 dt-bindings: arm/calxeda: drop unneeded quotes 0d2567437a54 dt-bindings: fsl,dpaa2-console: drop unneeded quotes 352ed027a423 dt-bindings: interrupt-controller: qcom,pdc: document pdc on X1E80100 df641036bac4 dt-bindings: qcom,pdc: document the SM8650 Power Domain Controller 1e17b2ba4499 dt-bindings: interrupt-controller: Add SDX75 PDC compatible c0aff4abb03a dt-bindings: reset: imx-src: Simplify compatible schema and drop unneeded quotes df20c9f94014 dt-bindings: reset: qcom: drop unneeded quotes 1516b28c7069 dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/Five SoC a80bc27a0fe8 dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller 0b8db84ecfc4 ASoC: Intel: Soundwire related board and match updates 303600aff1ef Merge v6.7-rc3 into drm-next d03f6dca688d arm64: dts: rockchip: Use NCM6A-IO board for edgeble-neu6b 2dcf7dbe2812 dt-bindings: arm: rockchip: Update edgeble-neu6 bindings b2a45d98f95b arm64: dts: rockchip: add USB3 host on rk3588s-orangepi-5 766aa3119c2f ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617 3ea15a23d9c7 ARM: dts: motorola-mapphone: Move handset devices to a common file 5127524f7e6f ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894 7e16bd264a3a dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets 7d420d843f98 ARM: dts: renesas: r9a06g032: Add missing space in compatible 0faa59be192f arm64: dts: renesas: r9a09g011: Add missing space in compatible 807cfe5cde5c dt-bindings: phy: add compatible for Mediatek MT8195 c52707b1bf77 dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example 34ec5dda2a01 dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: drop text about parent syscon and drop example f738d7a9dfab dt-bindings: iommu: dart: Add t8103-usb4-dart compatible 2c963cfa7e8e ARM: dts: renesas: armadillo800eva: Add LCD panel a35135dad31c dt-bindings: pinctrl: renesas: Drop unneeded quotes d5212619f0a0 ARM: dts: renesas: r8a7740: Add LCDC nodes 048bdb67a0f6 arm64: dts: renesas: draak: Move HDMI bus properties to correct node ab52a67f9767 arm64: dts: renesas: draak: Make HDMI the default video input dab3ba03f28c Merge 6.7-rc3 into usb-next ec6cd76a8793 arm64: dts: meson-axg: jethub-jxx add support for EEPROM 2da076589eac arm64: dts: amlogic: meson-axg: pinctrl node for NAND cdc5df918882 arm64: dts: amlogic: minor whitespace cleanup around '=' a5dead35fc4b arm64: dts: Add watchdog node for Amlogic S4 SoCs 37c5369b4667 arm64: dts: Add watchdog node for Amlogic C3 SoCs 1d8b2a265b81 dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl 9556e1708419 ARM: dts: imx7s: Add DMA channels for CSPI peripherals c1e5b6c6855f arm64: dts: imx8mp-venice-gw72xx: add TPM device fc1ee0050ce4 arm64: dts: imx8mm-venice-gw72xx: add TPM device 5a125bf20bf1 arm64: dts: imx93: update anatop node 292fc296ecdd arm64: dts: imx93-11x11-evk: add 12 ms delay to make sure the VDD_SD power off b81451d8d4d3 arm64: dts: imx93: change tuning start to get a large scan range for standard tuning 7ee940495143 arm64: dts: imx93-11x11-evk: set SION for cmd and data pad of USDHC 1b2037987962 arm64: dts: imx8mp: Describe M24C32-D write-lockable page in DH i.MX8MP DHCOM DT 94d5d7d36ba8 ARM: dts: imx6ul: mba6ulx: fix typo in comments cbbed6036bfe ARM: dts: imx6qdl: mba6: fix typo in comments e6c50d6fd99e arm64: dts: imx8mp-beacon-kit: Enable DSI to HDMI Bridge 3743277142d0 arm64: dts: imx8mm: Add CCM interrupts 663758efb819 arm64: dts: imx8mn: Add CCM interrupts 88774bafda13 arm64: dts: imx8mp: Add CCM interrupts e4d9f4208c6c ARM: dts: imx7s: Add missing #thermal-sensor-cells e4c3f040fee6 ARM: dts: imx7s: Fix nand-controller #size-cells 62a7c97c7c3f ARM: dts: imx7s: Fix lcdif compatible 9f3037b332bf ARM: dts: imx7d: Fix coresight funnel ports d844fe5270b1 arm64: dts: freescale: add initial device tree for MBa93xxCA starter kit ad161fbd54ca arm64: dts: freescale: tqma9352-mba93xxla: add 'chassis-type' property 8ec09c8f530c arm64: dts: imx93: Configure clock rate for audio PLL 9d7ba48273ea arm64: dts: imx93: Add audio device nodes b1553710809c dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator 471ace1f09be dt-bindings: gpio: brcmstb: drop unneeded quotes f8159413e6f1 ARM: dts: ti: keystone: minor whitespace cleanup around '=' 381a63044158 dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids c1ad3e49f07c dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids c8fb56a76774 dt-bindings: dma: qcom,gpi: document the SM8650 GPI DMA Engine 8e868f10ea21 dt-bindings: dma: rz-dmac: Document RZ/Five SoC e1504d7602c0 dt-bindings: net: qcom,ipa: add SM8550 compatible f118e169a194 dt-bindings: dma: qcom: gpi: add compatible for X1E80100 11518ff4d13c dt-bindings: pinctrl: qcom: Add X1E80100 pinctrl d3fe1008f0c8 ASoC: dt-bindings: correct white-spaces in examples f9b11918132f dt-bindings: crypto: convert Inside Secure SafeXcel to the json-schema 52b8a84c5283 dt-bindings: dma: ti: k3-udma: Describe cfg register regions 9b2e4fa1e7f2 dt-bindings: dma: ti: k3-pktdma: Describe cfg register regions 6d91e2a3766b dt-bindings: dma: ti: k3-bcdma: Describe cfg register regions ea1d92699d2a dt-bindings: dma: ti: k3-*: Add descriptions for register regions 7cf45f021d31 arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller dc0e2a7e69c2 arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers 185cc3e40c9f dt-bindings: pinctrl: samsung: use Exynos7 fallbacks for newer wake-up controllers 54829849af39 Merge branch 'icc-x1e80100' into icc-next 8e2202f335a4 dt-bindings: interconnect: Add Qualcomm X1E80100 SoC 54f1f68e019b dt-bindings: interconnect: qcom-bwmon: document SM8650 BWMONs 4e7bf80ce812 dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC 615397ecb02b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net e673bd9cbb13 dt-bindings: serial: fsl-linflexuart: change the maintainer email address f79b00fe4cab dt-bindings: serial: renesas,sci: Document RZ/Five SoC 911d5cce2a4e Merge tag 'drm-misc-next-2023-11-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next ab1f350663b1 dt-bindings: power: rpmpd: Update part number to X1E80100 6fe8e1a8dc99 dt-bindings: backlight: mp3309c: Remove two required properties cc4e22233cb5 dt-bindings: usb: qcom,dwc3: adjust number of interrupts on SM6125 9161184d7271 dt-bindings: net: renesas,ethertsn: Add Ethernet TSN 788d52642da4 Merge tag 'v6.7-rc2' into media_stage d2975fb00035 dt-bindings: gpu: Add Imagination Technologies PowerVR/IMG GPU 59078ccb21d1 dt-bindings: usb: qcom,dwc3: document the SM8560 SuperSpeed DWC3 USB controller 627316c016dd dt-bindings: usb: renesas,usbhs: Document RZ/Five SoC 99b07ecabc3d dt-bindings: cache: sifive,ccache0: Add StarFive JH7100 compatible 0118ff6d8abd ASoC: dt-bindings: fsl,mqs: Convert format to json-schema 0a9a12593184 ASoC: dt-bindings: sound-card-common: List sound widgets ignoring system suspend 165648aad162 ARM: dts: stm32: add SPI support on STM32F746 8f3fa20269a0 ARM: dts: stm32: add STM32F746 syscfg clock dc50601ba2d8 dt-bindings: net: xlnx,axi-ethernet: Introduce DMA support 72d23e1de1b0 arm64: dts: imx8mp: Add reserve-memory nodes for DSP 9bab315d31f8 spi: axi-spi-engine improvements 23a75f159231 ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco 4656437906e9 ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128 25251d661471 ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128 2d36fa2aa286 ARM: dts: rockchip: Add USB host clocks for RK3128 4e1bd401bbe3 ARM: dts: rockchip: Add Geniatech XPI-3128 RK3128 board 7e6458d9a7f3 ARM: dts: rockchip: Add sdmmc_det pinctrl for RK3128 12867f1ccb42 dt-bindings: arm: rockchip: Add Geniatech XPI-3128 fda729bcbd69 arm64: dts: rockchip: Add Powkiddy RK2023 317a36f59e1b arm64: dts: rockchip: Update powkiddy,rgb30 include to rk2023 DTSI dc9a81379af6 dt-bindings: arm: rockchip: Add Powkiddy RK2023 70a31fd9ffa3 dt-bindings: spi: axi-spi-engine: convert to yaml b68504144dbe Merge tag 'drm-misc-next-2023-11-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next 8260e721d1b5 dt-bindings: display: nv3051d: Update NewVision NV3051D compatibles 0a502f9716cc arm64: dts: renesas: rzg3s-smarc: Enable SDHI1 eccf7ee1aefe arm64: dts: renesas: rzg3s-smarc-som: Enable SDHI2 fbd14cd9ff35 ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY c86d9749ca2a ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY 1e1f6887a01b arm64: dts: allwinner: h616: add Orange Pi Zero 2W support 5795c68b5edc dt-bindings: arm: sunxi: add Orange Pi Zero 2W a5b7fa02fbde dt-bindings: crypto: qcom,prng: document SM8650 53be5450f8ac dt-bindings: crypto: qcom-qce: document the SM8650 crypto engine e65dc233e98b dt-bindings: crypto: qcom,inline-crypto-engine: document the SM8650 ICE d2a2bd80cca6 dt-bindings: net: renesas,etheravb: Document RZ/Five SoC f491b5315b58 dt-bindings: Document Marvell Aquantia PHY 7b52e889e53f arm64: dts: rockchip: add analog audio to RK3588 EVB1 92de4720f37c spi: dt-bindings: renesas,rspi: Document RZ/Five SoC 6e54c4bd7590 ASoC: dt-bindings: renesas,rz-ssi: Document RZ/Five SoC 87bb03481662 dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property 91e2c8ceb4de dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property f9fe5526efd5 dt-bindings: iio: Add MCP9600 thermocouple EMF converter 9942ece9d870 dt-bindings: iio: imu: Add Bosch BMI323 49d380d6e152 dt-bindings: adc: provide max34408/9 device tree binding document 895869158303 dt-bindings: media: wave5: add yaml devicetree bindings 77bf61c28407 dt-bindings: arm: Add support for DSB MSR register 18adf91da0ca dt-bindings: arm: Add support for DSB element size 075ac55ca93b dt-bindings: phy: qcom,snps-eusb2: document the SM8650 Synopsys eUSB2 PHY fda8409f7058 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: document the SM8650 QMP USB/DP Combo PHY b0b6815d9143 dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: document the SM8650 QMP PCIe PHYs db24b834638a dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8650 QMP UFS PHY 6a737e056a8b media: dt-bindings: Add JH7110 Camera Subsystem 716cbea9d35a dt-bindings: power: reset: $ref reboot-mode in nvmem-reboot-mode c8dedfdf167b dt-bindings: power: reset: $ref reboot-mode in syscon-reboot-mode 6c14a95472bb ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges 866767db6bbb ARM: dts: samsung: exynos4: fix camera unit addresses/ranges f0d3848e2cef ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandle dc6ff9889013 dt-bindings: w1: Add AMD AXI w1 host and MAINTAINERS entry a8a9188e96a6 dt-bindings: power: fsl,scu-pd: Document imx8dl f06b78172daa dt-bindings: qcom,pdc: Add compatible for SM8550 7a87643120eb dt-bindings: input: samsung,s6sy761: convert to DT schema e4ccdd770c53 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 7b213bd80e13 dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible 892b87e000d2 dt-bindings: arm: samsung: Document exynosautov920 SADK board binding ce1b89aee7ea dt-bindings: pwm: samsung: add exynosautov920 compatible 5e6bd42714ad dt-bindings: serial: samsung: add exynosautov920-uart compatible 3ea12f0eff84 dt-bindings: samsung: usi: add exynosautov920-usi compatible 5b6e042a72b8 dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible 2dff85192843 dt-bindings: samsung: exynos-sysreg: add exynosautov920 sysreg 3123103c12c0 dt-bindings: pinctrl: samsung: add exynosautov920 5b929ffdc9be arm64: dts: exynos: add gpio-key node for exynosautov9-sadk 6bc5effbe8dd arm64: dts: exynosautov9: add specific compatibles to several blocks 25addf827769 arm64: dts: exynos850: add specific compatibles to several blocks 5ab70c11f08f arm64: dts: exynos7885: add specific compatibles to several blocks f7c77a1ea95a arm64: dts: exynos7: add specific compatibles to several blocks 56493af64c01 arm64: dts: exynos5433: add specific compatibles to several blocks 3530786802b6 dt-bindings: pwm: samsung: add specific compatibles for existing SoC 97419692fe3c ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC 7081448ca2cf dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC 973115e1f51f dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC 6b99281097f0 dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC a893a294345b dt-bindings: serial: samsung: add specific compatibles for existing SoC 2a3d0691d56f dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC 7e49408d51e6 dt-bindings: pinctrl: samsung: add specific compatibles for existing SoC 1bb1eca74ad5 Merge drm/drm-next into drm-misc-next e9731895ee20 dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC 33b5aa8f7d9a ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name fa1f536e3df0 ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name 4e5382dc8820 ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel 6be6ba7888ef ARM: dts: qcom: pm8921: Disable keypad by default 5917ae72cd70 ARM: dts: qcom: msm8974: move regulators to board files 551cbcd2547c ARM: dts: qcom: msm8960: drop useless rpm regulators node 6d9878cc6a6a ARM: dts: qcom: msm8660: move RPM regulators to board files d0ed11e33ba0 ARM: dts: qcom: mdm9615: move RPM regulators to board files 1c636116afea ARM: dts: qcom: apq8064: move RPM regulators to board files b9d11fecae9e ARM: dts: qcom: pm8058: switch to interrupts-extended e8a26b432fd4 ARM: dts: qcom: pm8018: switch to interrupts-extended 86831cb445f6 ARM: dts: qcom: pm8921: switch to interrupts-extended 6d6c0b95e077 ARM: dts: qcom: pm8058: use defined IRQ flags 9d0903209824 ARM: dts: qcom: pm8921: move reg property 6a63db48b660 ARM: dts: qcom: pm8018: move reg property 9d6af1dd4790 ARM: dts: qcom: pm8921: reorder nodes 5db5515193a6 ARM: dts: qcom: pm8058: reorder nodes d4df6f1babb5 ARM: dts: qcom: msm8660: split PMIC to separate dtsi files c56480ffb4b8 ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files f8574d2c7c62 ARM: dts: qcom: apq8064: split PMICs to separate dtsi files 298695290d90 ARM: dts: qcom: msm8960: split PMIC to separate dtsi files 1c3c930ec46c ARM: dts: qcom: msm8960: move PMIC interrupts to the board files 7f5541db889f ARM: dts: qcom: msm8660: move PMIC interrupts to the board files 812cfe71b26a ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files f5c8a18b7116 ARM: dts: qcom: apq8064: move PMIC interrupts to the board files b7510b8da2f6 ARM: dts: qcom: msm8960: fix PMIC node labels 6475671dcca1 ARM: dts: qcom: msm8660: fix PMIC node labels 4dfac4d841ef ARM: dts: qcom: mdm9615: fix PMIC node labels 07091c1b87fb ARM: dts: qcom: apq8064: fix PMIC node labels 155004433670 ARM: dts: qcom: strip prefix from PMIC files 21220b16b281 ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses 3d3f8059a9f6 ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place b9d136b033b8 ARM: dts: qcom: msm8660-surf: use keypad label directly fc4f79da1abe ARM: dts: qcom: msm8960: introduce label for PMIC keypad 0e33f3448e7c ARM: dts: qcom: apq8064: correct XOADC register address 9bed8b24890a ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings edfbe32172f4 ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings c709366fb89e arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings 29a99a6d955d arm64: dts: qcom: sm8250: switch USB QMP PHY to new style of bindings e13f8dc0ea91 arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings bed6aed8ceec arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings 7cb8dff829b0 arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings 77a8ce42cb30 arm64: dts: qcom: msm8996: switch USB QMP PHY to new style of bindings b92a18870b3e arm64: dts: qcom: ipq8074: switch USB QMP PHY to new style of bindings 18dd153b1c8f arm64: dts: qcom: ipq6018: switch USB QMP PHY to new style of bindings ad3769d7933c Merge tag 'qcom-arm64-for-6.7-2' into arm64-for-6.8 8088e683c89b dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC c15df41a0c35 dt-bindings: i2c: exynos5: add specific compatibles for existing SoC d755df63e9df dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC 6f4cb3f40711 arm64: dts: renesas: rzg2lc-smarc-som: Enable 4-bit tx support 5ddba1791b2b arm64: dts: renesas: rzg2l-smarc-som: Enable 4-bit tx support 75b8e7f58abe regulator: add under-voltage support (part 2) 791f1550a798 Add DMIC slew rate controls e128625eb7cb dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer c3c85cc965c8 dt-bindings: pinctrl: qcom,sm8650-lpass-lpi-pinctrl: add SM8650 LPASS 6da3c9fd1509 ARM: dts: renesas: marzen: Rename keyboard nodes 2d7a77894ba8 ARM: dts: renesas: iwg22d-sodimm: Fix stmpe node names f4c62eb4fbd6 arm64: dts: renesas: Add missing ADV751[13] power supply properties a94c426db9b8 ARM: dts: renesas: Add missing ADV751[13] power supply properties f213adc3b192 ARM: dts: renesas: rcar-gen2: Fix I2C bus demux node names 127c56414e9f riscv: dts: renesas: Convert isa detection to new properties 9836c1c69324 ARM: dts: renesas: blanche: Add FLASH node d446795daa00 ARM: dts: renesas: marzen: Add FLASH node 9a4a8a78013a spi: add stm32f7-spi compatible e74e9793f9c7 regulator: dt-bindings: Add 'regulator-uv-less-critical-window-ms' property eafbf4f37d51 regulator: dt-bindings: Allow system-critical marking for fixed-regulator 52381ed5b4ac regulator: dt-bindings: Add system-critical-regulator property ec8f058714a6 dt-bindings: regulator: qcom,smd-rpm-regulator: Document PM8937 IC cf118cc80e89 dt-bindings: regulator: qcom,spmi-regulator: Document PM8937 PMIC 2ae471b5eeb2 ASoC: dt-bindings: use "soundwire" as controller's node name in examples caa17228e281 ASoC: dt-bindings: qcom,sm8250: add SM8550 sound card 2d2f997a2bdc dt-bindings: es8328: convert to DT schema format 68e113702391 ASoC: dt-bindings: Simplify port schema eac536a576c7 ASoC: dt-bindings: nau8821: Add DMIC slew rate. 409f501ee9b2 dt-bindings: gpu: v3d: Add BCM2712's compatible 22f7441e8685 dt-bindings: display: ssd132x: Remove '-' before compatible enum a3de98e60ec5 ARM: dts: qcom: add device tree for Nokia Lumia 830 9ad6bcd4499d ARM: dts: qcom: add device tree for Nokia Lumia 735 41ee9ea2aefd ARM: dts: qcom: add device tree for Microsoft Lumia 640 XL 0dc127c0d612 ARM: dts: qcom: add device tree for Microsoft Lumia 640 d30c995f440e ARM: dts: qcom: add common dt for MSM8x26 Lumias along with Nokia Lumia 630 ed92546211d5 dt-bindings: arm: qcom: Document MSM8x26-based Lumia phones d783936fa1dc arm64: dts: qcom: msm8939-longcheer-l9100: Enable RGB LED b14cb550d720 arm64: dts: qcom: msm8916-longcheer-l8910: Enable RGB LED 183a2f447424 arm64: dts: qcom: msm8939-samsung-a7: Add sound and modem 9b7d68606781 arm64: dts: qcom: msm8916-samsung-j5: Add sound and modem f382f197e0c5 arm64: dts: qcom: msm8916-samsung-gt5: Add sound and modem 59a815c1572d arm64: dts: qcom: msm8916-longcheer-l8910: Add sound and modem 582b4cfec9a9 ARM: dts: qcom: msm8226: provide dsi phy clocks to mmcc 1703230be2a6 ARM: dts: qcom: msm8974: sort nodes by reg e23f302820cb ARM: dts: qcom: msm8974: replace incorrect indentation in interconnect 373015625e6b arm64: dts: qcom: msm8916-longcheer-l8150: Add sound and modem c1a66861dc32 arm64: dts: qcom: msm8916-asus-z00l: Add sound and modem 489f91f0dfcc arm64: dts: qcom: msm8916-alcatel-idol347: Add sound and modem 2f81e02a3b04 arm64: dts: qcom: msm8916-wingtech-wt88047: Add sound and modem 07047876d71e arm64: dts: qcom: msm8916-samsung-serranove: Add sound and modem 1d94420f32b0 arm64: dts: qcom: msm8916-samsung-a2015: Add sound and modem 9334b10d351c arm64: dts: qcom: msm8916: Add common msm8916-modem-qdsp6.dtsi 30b857e0f639 arm64: dts: qcom: msm8939: Add QDSP6 5b210c47425a arm64: dts: qcom: msm8916: Add QDSP6 f1aed61c2c48 arm64: dts: qcom: msm8939: Add BAM-DMUX WWAN 702f57c12856 arm64: dts: qcom: sc8280xp-x13s: add missing camera LED pin config d21fc2d89cfd arm64: dts: qcom: pm7250b: Use correct node name for gpios ecc4cb08c0f3 arm64: dts: qcom: sc7280: Add Camera Control Interface busses c01ef95e3aa7 arm64: dts: qcom: sdm845-xiaomi-beryllium: enable flash led fe3ccb41dafa arm64: dts: qcom: sdm845-oneplus: enable flash LED 0f6538f89c64 arm64: dts: qcom: sc8280xp-x13s: Use the correct DP PHY compatible c9e8e85b1afd arm64: dts: qcom: msm8916-*: Fix alphabetic node order 9e38e840740d arm64: dts: qcom: msm8939-longcheer-l9100: Enable wcnss_mem 5cdb05e593ef arm64: dts: qcom: msm8916-samsung-gt5: Enable GPU 0d72dfbbf352 arm64: dts: qcom: ipq5332: include the GPLL0 as clock provider for mailbox 13c545bfe884 arm64: dts: qcom: ipq9574: include the GPLL0 as clock provider for mailbox 8b57686e7ad0 arm64: dts: qcom: ipq6018: include the GPLL0 as clock provider for mailbox 11d8f7a1bf44 arm64: dts: qcom: ipq8074: include the GPLL0 as clock provider for mailbox 9b0b036ea0de arm64: dts: qcom: ipq9574: populate the opp table based on the eFuse f3636ba1edce arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse 8831b26a6579 arm64: dts: qcom: sdm670: add specific cpufreq compatible 8ce87f299cdb arm64: dts: qcom: sm8150: extend the size of the PDC resource b3cbe4ff9c30 arm64: dts: qcom: ipq5018: add QUP1 SPI controller f330c2991aa0 arm64: dts: qcom: qrb4210-rb2: don't force usb peripheral mode daa68cbafb06 arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC 6232143457ae arm64: dts: qcom: sa8775p: Add RPMh sleep stats 973959c2edf1 arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node 4c021a56b758 arm64: dts: qcom: sm6375-pdx225: Add USBPHY regulators 6fb033b4f60e arm64: dts: qcom: sm6375-pdx225: Enable ATH10K WiFi fa14ce25949b arm64: dts: qcom: sm6375-pdx225: Enable MSS e77ac5cceb8e arm64: dts: qcom: sm6375: Add UART1 dec2e7998de5 arm64: dts: qcom: ipq9574: Enable WPS buttons d3619641203e arm64: dts: qcom: ipq9574: Add common RDP dtsi file 9faa71835343 arm64: dts: qcom: ipq5018: Enable USB 71275274da1f arm64: dts: qcom: ipq5018: Add USB related nodes af8b25f21479 arm64: dts: qcom: sc7280: add TRNG node 00e1b06bb47a arm64: dts: qcom: sa8775p: add TRNG node ac7c5d2655a7 arm64: dts: qcom: sm8450: add TRNG node 0087dcd6513a arm64: dts: qcom: sm8550: add TRNG node git-subtree-dir: dts/upstream git-subtree-split: b35b9bd1d4eed2acf8bc38ec5b1b6eef6261b4f0

commit: 93743d241c64bc1f7ecbf3262d1683176551e11f [log] [tgz]
author: Tom Rini <trini@konsulko.com> Mon Apr 01 09:08:13 2024 -0400
committer: Tom Rini <trini@konsulko.com> Mon Apr 01 09:08:13 2024 -0400
tree: 11abd1331cf3b50d686ebe65a24e69373bac27e4
parent: 53633a893a06bd5a0c807287d9cc29337806eaf7 [diff]
diff --git a/Bindings/Makefile b/Bindings/Makefile
index 3e88619..129cf69 100644
--- a/Bindings/Makefile
+++ b/Bindings/Makefile

@@ -28,7 +28,10 @@
 find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
 		-name 'processed-schema*' \)
 
-find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))"
+find_cmd = $(find_all_cmd) | \
+		sed 's|^$(srctree)/||' | \
+		grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
+		sed 's|^|$(srctree)/|'
 CHK_DT_DOCS := $(shell $(find_cmd))
 
 quiet_cmd_yamllint = LINT    $(src)

diff --git a/Bindings/arm/calxeda/l2ecc.yaml b/Bindings/arm/calxeda/l2ecc.yaml
index a9fe012..76b65ea 100644
--- a/Bindings/arm/calxeda/l2ecc.yaml
+++ b/Bindings/arm/calxeda/l2ecc.yaml

@@ -16,7 +16,7 @@
 
 properties:
   compatible:
-    const: "calxeda,hb-sregs-l2-ecc"
+    const: calxeda,hb-sregs-l2-ecc
 
   reg:
     maxItems: 1

diff --git a/Bindings/arm/cpus.yaml b/Bindings/arm/cpus.yaml
index ffd5263..cc5a21b 100644
--- a/Bindings/arm/cpus.yaml
+++ b/Bindings/arm/cpus.yaml

@@ -198,6 +198,7 @@
       - qcom,kryo660
       - qcom,kryo685
       - qcom,kryo780
+      - qcom,oryon
       - qcom,scorpion
 
   enable-method:

diff --git a/Bindings/arm/fsl.yaml b/Bindings/arm/fsl.yaml
index 32b1958..228dcc5 100644
--- a/Bindings/arm/fsl.yaml
+++ b/Bindings/arm/fsl.yaml

@@ -967,6 +967,7 @@
               - menlo,mx8menlo                       # Verdin iMX8M Mini Module on i.MX8MM Menlo board
               - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
               - toradex,verdin-imx8mm-nonwifi-dev    # Verdin iMX8M Mini Module on Verdin Development Board
+              - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow
               - toradex,verdin-imx8mm-nonwifi-yavia  # Verdin iMX8M Mini Module on Yavia
           - const: toradex,verdin-imx8mm-nonwifi     # Verdin iMX8M Mini Module without Wi-Fi / BT
           - const: toradex,verdin-imx8mm             # Verdin iMX8M Mini Module
@@ -977,6 +978,7 @@
           - enum:
               - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
               - toradex,verdin-imx8mm-wifi-dev    # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow
               - toradex,verdin-imx8mm-wifi-yavia  # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia
           - const: toradex,verdin-imx8mm-wifi     # Verdin iMX8M Mini Wi-Fi / BT Module
           - const: toradex,verdin-imx8mm          # Verdin iMX8M Mini Module
@@ -1022,7 +1024,10 @@
 
       - description: Variscite VAR-SOM-MX8MN based boards
         items:
-          - const: variscite,var-som-mx8mn-symphony
+          - enum:
+              - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board
+              - rve,rve-gateway # i.MX8MN RVE Gateway Board
+              - variscite,var-som-mx8mn-symphony
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
 
@@ -1048,6 +1053,9 @@
               - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
+              - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
+              - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
+              - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
               - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
               - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
               - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
@@ -1100,6 +1108,7 @@
           - enum:
               - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
               - toradex,verdin-imx8mp-nonwifi-dev    # Verdin iMX8M Plus Module on Verdin Development Board
+              - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow
               - toradex,verdin-imx8mp-nonwifi-yavia  # Verdin iMX8M Plus Module on Yavia
           - const: toradex,verdin-imx8mp-nonwifi     # Verdin iMX8M Plus Module without Wi-Fi / BT
           - const: toradex,verdin-imx8mp             # Verdin iMX8M Plus Module
@@ -1110,6 +1119,7 @@
           - enum:
               - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
               - toradex,verdin-imx8mp-wifi-dev    # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow
               - toradex,verdin-imx8mp-wifi-yavia  # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
           - const: toradex,verdin-imx8mp-wifi     # Verdin iMX8M Plus Wi-Fi / BT Module
           - const: toradex,verdin-imx8mp          # Verdin iMX8M Plus Module
@@ -1476,6 +1486,16 @@
           - const: solidrun,lx2162a-som
           - const: fsl,lx2160a
 
+      - description:
+          TQ-Systems TQMLX2160A is a series of socketable SOM featuring
+          LX2160A system-on-chip variants. MBLX2160A mainboard can be used a
+          starterkit.
+        items:
+          - enum:
+              - tq,lx2160a-tqmlx2160a-mblx2160a
+          - const: tq,lx2160a-tqmlx2160a
+          - const: fsl,lx2160a
+
       - description: S32G2 based Boards
         items:
           - enum:

diff --git a/Bindings/arm/google.yaml b/Bindings/arm/google.yaml
new file mode 100644
index 0000000..e20b5c9
--- /dev/null
+++ b/Bindings/arm/google.yaml

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/google.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Tensor platforms
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  ARM platforms using SoCs designed by Google branded "Tensor" used in Pixel
+  devices.
+
+  Currently upstream this is devices using "gs101" SoC which is found in Pixel
+  6, Pixel 6 Pro and Pixel 6a.
+
+  Google have a few different names for the SoC:
+  - Marketing name ("Tensor")
+  - Codename ("Whitechapel")
+  - SoC ID ("gs101")
+  - Die ID ("S5P9845")
+
+  Likewise there are a couple of names for the actual device
+  - Marketing name ("Pixel 6")
+  - Codename ("Oriole")
+
+  Devicetrees should use the lowercased SoC ID and lowercased board codename,
+  e.g. gs101 and gs101-oriole.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Google Pixel 6 / Oriole
+        items:
+          - enum:
+              - google,gs101-oriole
+          - const: google,gs101
+
+  # Bootloader requires empty ect node to be present
+  ect:
+    type: object
+    additionalProperties: false
+
+required:
+  - ect
+
+additionalProperties: true
+
+...

diff --git a/Bindings/arm/hisilicon/controller/sysctrl.yaml b/Bindings/arm/hisilicon/controller/sysctrl.yaml
index 5a53d43..7a221e1 100644
--- a/Bindings/arm/hisilicon/controller/sysctrl.yaml
+++ b/Bindings/arm/hisilicon/controller/sysctrl.yaml

@@ -82,6 +82,23 @@
 
   ranges: true
 
+patternProperties:
+  '^clock@':
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - hisilicon,hi3620-clock
+          - hisilicon,hi3620-mmc-clock
+
+      reg:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 1
+
 required:
   - compatible
   - reg

diff --git a/Bindings/arm/marvell/armada-7k-8k.yaml b/Bindings/arm/marvell/armada-7k-8k.yaml
index 52d7852..16d2e13 100644
--- a/Bindings/arm/marvell/armada-7k-8k.yaml
+++ b/Bindings/arm/marvell/armada-7k-8k.yaml

@@ -60,4 +60,26 @@
           - const: marvell,armada-ap807-quad
           - const: marvell,armada-ap807
 
+      - description:
+          Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+          Armada CN9130 COM Express CPU module
+        items:
+          - const: marvell,cn9130-ac5x-carrier
+          - const: marvell,rd-ac5x-carrier
+          - const: marvell,cn9130-cpu-module
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description:
+          Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+          Armada CN9131 COM Express CPU module
+        items:
+          - const: marvell,cn9131-ac5x-carrier
+          - const: marvell,rd-ac5x-carrier
+          - const: marvell,cn9131-cpu-module
+          - const: marvell,cn9131
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
 additionalProperties: true

diff --git a/Bindings/arm/mediatek.yaml b/Bindings/arm/mediatek.yaml
index a5999b3..6f2f64a 100644
--- a/Bindings/arm/mediatek.yaml
+++ b/Bindings/arm/mediatek.yaml

@@ -176,6 +176,10 @@
           - const: mediatek,mt8186
       - items:
           - enum:
+              - mediatek,mt8188-evb
+          - const: mediatek,mt8188
+      - items:
+          - enum:
               - mediatek,mt8192-evb
           - const: mediatek,mt8192
       - items:
@@ -235,6 +239,13 @@
         items:
           - const: google,kappa
           - const: mediatek,mt8183
+      - description: Google Katsu (ASUS Chromebook Detachable CZ1)
+        items:
+          - enum:
+              - google,katsu-sku32
+              - google,katsu-sku38
+          - const: google,katsu
+          - const: mediatek,mt8183
       - description: Google Kodama (Lenovo 10e Chromebook Tablet)
         items:
           - enum:
@@ -244,6 +255,20 @@
               - google,kodama-sku32
           - const: google,kodama
           - const: mediatek,mt8183
+      - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
+        items:
+          - enum:
+              - google,makomo-sku0
+              - google,makomo-sku1
+          - const: google,makomo
+          - const: mediatek,mt8183
+      - description: Google Pico (Acer Chromebook Spin 311)
+        items:
+          - enum:
+              - google,pico-sku1
+              - google,pico-sku2
+          - const: google,pico
+          - const: mediatek,mt8183
       - description: Google Willow (Acer Chromebook 311 C722/C722T)
         items:
           - enum:

diff --git a/Bindings/arm/mediatek/mediatek,audsys.txt b/Bindings/arm/mediatek/mediatek,audsys.txt
deleted file mode 100644
index 699776b..0000000
--- a/Bindings/arm/mediatek/mediatek,audsys.txt
+++ /dev/null

@@ -1,39 +0,0 @@
-MediaTek AUDSYS controller
-============================
-
-The MediaTek AUDSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-audsys", "syscon"
-	- "mediatek,mt6765-audsys", "syscon"
-	- "mediatek,mt6779-audio", "syscon"
-	- "mediatek,mt7622-audsys", "syscon"
-	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
-	- "mediatek,mt8167-audiosys", "syscon"
-	- "mediatek,mt8183-audiosys", "syscon"
-	- "mediatek,mt8192-audsys", "syscon"
-	- "mediatek,mt8516-audsys", "syscon"
-- #clock-cells: Must be 1
-
-The AUDSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Required sub-nodes:
--------
-For common binding part and usage, refer to
-../sonud/mt2701-afe-pcm.txt.
-
-Example:
-
-	audsys: clock-controller@11220000 {
-		compatible = "mediatek,mt7622-audsys", "syscon";
-		reg = <0 0x11220000 0 0x2000>;
-		#clock-cells = <1>;
-
-		afe: audio-controller {
-			...
-		};
-	};

diff --git a/Bindings/arm/mediatek/mediatek,audsys.yaml b/Bindings/arm/mediatek/mediatek,audsys.yaml
new file mode 100644
index 0000000..45d4a66
--- /dev/null
+++ b/Bindings/arm/mediatek/mediatek,audsys.yaml

@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,audsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AUDSYS controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@collabora.com>
+
+description:
+  The MediaTek AUDSYS controller provides various clocks to the system.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-audsys
+              - mediatek,mt6765-audsys
+              - mediatek,mt6779-audsys
+              - mediatek,mt7622-audsys
+              - mediatek,mt8167-audsys
+              - mediatek,mt8173-audsys
+              - mediatek,mt8183-audsys
+              - mediatek,mt8186-audsys
+              - mediatek,mt8192-audsys
+              - mediatek,mt8516-audsys
+          - const: syscon
+      - items:
+          # Special case for mt7623 for backward compatibility
+          - const: mediatek,mt7623-audsys
+          - const: mediatek,mt2701-audsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  audio-controller:
+    $ref: /schemas/sound/mediatek,mt2701-audio.yaml#
+    type: object
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    #include <dt-bindings/clock/mt2701-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        audsys: clock-controller@11220000 {
+            compatible = "mediatek,mt7622-audsys", "syscon";
+            reg = <0 0x11220000 0 0x2000>;
+            #clock-cells = <1>;
+
+            afe: audio-controller {
+                compatible = "mediatek,mt2701-audio";
+                interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                             <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+                interrupt-names = "afe", "asys";
+                power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+                clocks = <&infracfg CLK_INFRA_AUDIO>,
+                         <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+                         <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+                         <&topckgen CLK_TOP_AUD_48K_TIMING>,
+                         <&topckgen CLK_TOP_AUD_44K_TIMING>,
+                         <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+                         <&audsys CLK_AUD_I2SO1>,
+                         <&audsys CLK_AUD_I2SO2>,
+                         <&audsys CLK_AUD_I2SO3>,
+                         <&audsys CLK_AUD_I2SO4>,
+                         <&audsys CLK_AUD_I2SIN1>,
+                         <&audsys CLK_AUD_I2SIN2>,
+                         <&audsys CLK_AUD_I2SIN3>,
+                         <&audsys CLK_AUD_I2SIN4>,
+                         <&audsys CLK_AUD_ASRCO1>,
+                         <&audsys CLK_AUD_ASRCO2>,
+                         <&audsys CLK_AUD_ASRCO3>,
+                         <&audsys CLK_AUD_ASRCO4>,
+                         <&audsys CLK_AUD_AFE>,
+                         <&audsys CLK_AUD_AFE_CONN>,
+                         <&audsys CLK_AUD_A1SYS>,
+                         <&audsys CLK_AUD_A2SYS>,
+                         <&audsys CLK_AUD_AFE_MRGIF>;
+
+                clock-names = "infra_sys_audio_clk",
+                              "top_audio_mux1_sel",
+                              "top_audio_mux2_sel",
+                              "top_audio_a1sys_hp",
+                              "top_audio_a2sys_hp",
+                              "i2s0_src_sel",
+                              "i2s1_src_sel",
+                              "i2s2_src_sel",
+                              "i2s3_src_sel",
+                              "i2s0_src_div",
+                              "i2s1_src_div",
+                              "i2s2_src_div",
+                              "i2s3_src_div",
+                              "i2s0_mclk_en",
+                              "i2s1_mclk_en",
+                              "i2s2_mclk_en",
+                              "i2s3_mclk_en",
+                              "i2so0_hop_ck",
+                              "i2so1_hop_ck",
+                              "i2so2_hop_ck",
+                              "i2so3_hop_ck",
+                              "i2si0_hop_ck",
+                              "i2si1_hop_ck",
+                              "i2si2_hop_ck",
+                              "i2si3_hop_ck",
+                              "asrc0_out_ck",
+                              "asrc1_out_ck",
+                              "asrc2_out_ck",
+                              "asrc3_out_ck",
+                              "audio_afe_pd",
+                              "audio_afe_conn_pd",
+                              "audio_a1sys_pd",
+                              "audio_a2sys_pd",
+                              "audio_mrgif_pd";
+
+                assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+                                  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+                                  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+                                  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+                assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+                                         <&topckgen CLK_TOP_AUD2PLL_90M>;
+                assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+            };
+        };
+    };

diff --git a/Bindings/arm/mediatek/mediatek,ethsys.txt b/Bindings/arm/mediatek/mediatek,ethsys.txt
deleted file mode 100644
index eccd4b7..0000000
--- a/Bindings/arm/mediatek/mediatek,ethsys.txt
+++ /dev/null

@@ -1,29 +0,0 @@
-Mediatek ethsys controller
-============================
-
-The Mediatek ethsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-ethsys", "syscon"
-	- "mediatek,mt7622-ethsys", "syscon"
-	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
-	- "mediatek,mt7629-ethsys", "syscon"
-	- "mediatek,mt7981-ethsys", "syscon"
-	- "mediatek,mt7986-ethsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The ethsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ethsys: clock-controller@1b000000 {
-	compatible = "mediatek,mt2701-ethsys", "syscon";
-	reg = <0 0x1b000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};

diff --git a/Bindings/arm/mediatek/mediatek,infracfg.yaml b/Bindings/arm/mediatek/mediatek,infracfg.yaml
index ea98043..230b518 100644
--- a/Bindings/arm/mediatek/mediatek,infracfg.yaml
+++ b/Bindings/arm/mediatek/mediatek,infracfg.yaml

@@ -30,6 +30,7 @@
               - mediatek,mt7629-infracfg
               - mediatek,mt7981-infracfg
               - mediatek,mt7986-infracfg
+              - mediatek,mt7988-infracfg
               - mediatek,mt8135-infracfg
               - mediatek,mt8167-infracfg
               - mediatek,mt8173-infracfg

diff --git a/Bindings/arm/mediatek/mediatek,mmsys.yaml b/Bindings/arm/mediatek/mediatek,mmsys.yaml
index 536f5a5..b3c6888 100644
--- a/Bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Bindings/arm/mediatek/mediatek,mmsys.yaml

@@ -32,6 +32,9 @@
               - mediatek,mt8183-mmsys
               - mediatek,mt8186-mmsys
               - mediatek,mt8188-vdosys0
+              - mediatek,mt8188-vdosys1
+              - mediatek,mt8188-vppsys0
+              - mediatek,mt8188-vppsys1
               - mediatek,mt8192-mmsys
               - mediatek,mt8195-vdosys1
               - mediatek,mt8195-vppsys0

diff --git a/Bindings/arm/mediatek/mediatek,pericfg.yaml b/Bindings/arm/mediatek/mediatek,pericfg.yaml
index 26158d0..33c94c4 100644
--- a/Bindings/arm/mediatek/mediatek,pericfg.yaml
+++ b/Bindings/arm/mediatek/mediatek,pericfg.yaml

@@ -28,6 +28,7 @@
               - mediatek,mt8173-pericfg
               - mediatek,mt8183-pericfg
               - mediatek,mt8186-pericfg
+              - mediatek,mt8188-pericfg
               - mediatek,mt8195-pericfg
               - mediatek,mt8516-pericfg
           - const: syscon

diff --git a/Bindings/arm/msm/qcom,idle-state.txt b/Bindings/arm/msm/qcom,idle-state.txt
deleted file mode 100644
index 606b4b1..0000000
--- a/Bindings/arm/msm/qcom,idle-state.txt
+++ /dev/null

@@ -1,84 +0,0 @@
-QCOM Idle States for cpuidle driver
-
-ARM provides idle-state node to define the cpuidle states, as defined in [1].
-cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
-states. Idle states have different enter/exit latency and residency values.
-The idle states supported by the QCOM SoC are defined as -
-
-    * Standby
-    * Retention
-    * Standalone Power Collapse (Standalone PC or SPC)
-    * Power Collapse (PC)
-
-Standby: Standby does a little more in addition to architectural clock gating.
-When the WFI instruction is executed the ARM core would gate its internal
-clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
-trigger to execute the SPM state machine. The SPM state machine waits for the
-interrupt to trigger the core back in to active. This triggers the cache
-hierarchy to enter standby states, when all cpus are idle. An interrupt brings
-the SPM state machine out of its wait, the next step is to ensure that the
-cache hierarchy is also out of standby, and then the cpu is allowed to resume
-execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
-driver and is not defined in the DT. The SPM state machine should be
-configured to execute this state by default and after executing every other
-state below.
-
-Retention: Retention is a low power state where the core is clock gated and
-the memory and the registers associated with the core are retained. The
-voltage may be reduced to the minimum value needed to keep the processor
-registers active. The SPM should be configured to execute the retention
-sequence and would wait for interrupt, before restoring the cpu to execution
-state. Retention may have a slightly higher latency than Standby.
-
-Standalone PC: A cpu can power down and warmboot if there is a sufficient time
-between the time it enters idle and the next known wake up. SPC mode is used
-to indicate a core entering a power down state without consulting any other
-cpu or the system resources. This helps save power only on that core.  The SPM
-sequence for this idle state is programmed to power down the supply to the
-core, wait for the interrupt, restore power to the core, and ensure the
-system state including cache hierarchy is ready before allowing core to
-resume. Applying power and resetting the core causes the core to warmboot
-back into Elevation Level (EL) which trampolines the control back to the
-kernel. Entering a power down state for the cpu, needs to be done by trapping
-into a EL. Failing to do so, would result in a crash enforced by the warm boot
-code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
-be flushed in s/w, before powering down the core.
-
-Power Collapse: This state is similar to the SPC mode, but distinguishes
-itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
-modes. In a hierarchical power domain SoC, this means L2 and other caches can
-be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
-voltages reduced, provided all cpus enter this state.  Since the span of low
-power modes possible at this state is vast, the exit latency and the residency
-of this low power mode would be considered high even though at a cpu level,
-this essentially is cpu power down. The SPM in this state also may handshake
-with the Resource power manager (RPM) processor in the SoC to indicate a
-complete application processor subsystem shut down.
-
-The idle-state for QCOM SoCs are distinguished by the compatible property of
-the idle-states device node.
-
-The devicetree representation of the idle state should be -
-
-Required properties:
-
-- compatible: Must be one of -
-			"qcom,idle-state-ret",
-			"qcom,idle-state-spc",
-			"qcom,idle-state-pc",
-		and "arm,idle-state".
-
-Other required and optional properties are specified in [1].
-
-Example:
-
-	idle-states {
-		CPU_SPC: spc {
-			compatible = "qcom,idle-state-spc", "arm,idle-state";
-			entry-latency-us = <150>;
-			exit-latency-us = <200>;
-			min-residency-us = <2000>;
-		};
-	};
-
-[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml

diff --git a/Bindings/arm/qcom,coresight-remote-etm.yaml b/Bindings/arm/qcom,coresight-remote-etm.yaml
new file mode 100644
index 0000000..4fd5752
--- /dev/null
+++ b/Bindings/arm/qcom,coresight-remote-etm.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-remote-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coresight Remote ETM(Embedded Trace Macrocell)
+
+maintainers:
+  - Jinlong Mao <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+description:
+  Support for ETM trace collection on remote processor using coresight
+  framework. Enabling this will allow turning on ETM tracing on remote
+  processor like modem processor via sysfs and collecting the trace
+  via coresight TMC sinks.
+
+properties:
+  compatible:
+    const: qcom,coresight-remote-etm
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    etm {
+        compatible = "qcom,coresight-remote-etm";
+
+        out-ports {
+            port {
+                modem_etm0_out_funnel_modem: endpoint {
+                    remote-endpoint = <&funnel_modem_in_modem_etm0>;
+                };
+            };
+        };
+    };
+...

diff --git a/Bindings/arm/qcom,coresight-tpdm.yaml b/Bindings/arm/qcom,coresight-tpdm.yaml
index 3bad47b..61ddc3b 100644
--- a/Bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Bindings/arm/qcom,coresight-tpdm.yaml

@@ -44,6 +44,23 @@
     minItems: 1
     maxItems: 2
 
+  qcom,dsb-element-size:
+    description:
+      Specifies the DSB(Discrete Single Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. DSB element size currently only supports 32-bit and 64-bit.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [32, 64]
+
+  qcom,dsb-msrs-num:
+    description:
+      Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
+      registers supported by the monitor. If this property is not configured
+      or set to 0, it means this DSB TPDM doesn't support MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
   clocks:
     maxItems: 1
 
@@ -77,6 +94,9 @@
       compatible = "qcom,coresight-tpdm", "arm,primecell";
       reg = <0x0684c000 0x1000>;
 
+      qcom,dsb-element-size = /bits/ 8 <32>;
+      qcom,dsb-msrs-num = <16>;
+
       clocks = <&aoss_qmp>;
       clock-names = "apb_pclk";
 

diff --git a/Bindings/arm/qcom-soc.yaml b/Bindings/arm/qcom-soc.yaml
index 97621c9..d0751a5 100644
--- a/Bindings/arm/qcom-soc.yaml
+++ b/Bindings/arm/qcom-soc.yaml

@@ -23,7 +23,7 @@
 select:
   properties:
     compatible:
-      pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
   required:
     - compatible
 
@@ -31,17 +31,17 @@
   compatible:
     oneOf:
       # Preferred naming style for compatibles of SoC components:
-      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$"
+      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$"
       - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
 
       # Legacy namings - variations of existing patterns/compatibles are OK,
       # but do not add completely new entries to these:
-      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
-      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
+      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
       - enum:
           - qcom,dsi-ctrl-6g-qcm2290
           - qcom,gpucc-sdm630

diff --git a/Bindings/arm/qcom.yaml b/Bindings/arm/qcom.yaml
index 7f80f48..1a5fb88 100644
--- a/Bindings/arm/qcom.yaml
+++ b/Bindings/arm/qcom.yaml

@@ -87,29 +87,18 @@
         sm8350
         sm8450
         sm8550
+        sm8650
+        x1e80100
 
   The 'board' element must be one of the following strings:
 
         adp
-        ap-al02-c2
-        ap-al02-c6
-        ap-al02-c7
-        ap-al02-c8
-        ap-al02-c9
-        ap-mi01.2
-        ap-mi01.3
-        ap-mi01.6
-        ap-mi01.9
         cdp
-        cp01-c1
         dragonboard
-        hk01
-        hk10-c1
-        hk10-c2
         idp
         liquid
-        rdp432-c2
         mtp
+        qcp
         qrd
         rb2
         ride
@@ -138,7 +127,7 @@
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
   OS. These devices do not use the scheme described above. For details, see:
-  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
   $nodename:
@@ -186,11 +175,24 @@
 
       - items:
           - enum:
+              - microsoft,dempsey
+              - microsoft,makepeace
+              - microsoft,moneypenny
               - samsung,s3ve3g
           - const: qcom,msm8226
 
       - items:
           - enum:
+              - htc,memul
+              - microsoft,superman-lte
+              - microsoft,tesla
+              - motorola,peregrine
+          - const: qcom,msm8926
+          - const: qcom,msm8226
+
+      - items:
+          - enum:
+              - huawei,kiwi
               - longcheer,l9100
               - samsung,a7
               - sony,kanuti-tulip
@@ -397,6 +399,8 @@
       - items:
           - enum:
               - fairphone,fp5
+              - qcom,qcm6490-idp
+              - qcom,qcs6490-rb3gen2
           - const: qcom,qcm6490
 
       - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
@@ -1009,6 +1013,7 @@
               - sony,pdx203-generic
               - sony,pdx206-generic
               - xiaomi,elish
+              - xiaomi,pipa
           - const: qcom,sm8250
 
       - items:
@@ -1034,6 +1039,18 @@
               - qcom,sm8550-qrd
           - const: qcom,sm8550
 
+      - items:
+          - enum:
+              - qcom,sm8650-mtp
+              - qcom,sm8650-qrd
+          - const: qcom,sm8650
+
+      - items:
+          - enum:
+              - qcom,x1e80100-crd
+              - qcom,x1e80100-qcp
+          - const: qcom,x1e80100
+
   # Board compatibles go above
 
   qcom,msm-id:

diff --git a/Bindings/arm/rockchip.yaml b/Bindings/arm/rockchip.yaml
index 5f7c6c4..5cf5cbe 100644
--- a/Bindings/arm/rockchip.yaml
+++ b/Bindings/arm/rockchip.yaml

@@ -30,9 +30,11 @@
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
-      - description: Anbernic RG351M
+      - description: Anbernic RK3326 Handheld Gaming Console
         items:
-          - const: anbernic,rg351m
+          - enum:
+              - anbernic,rg351m
+              - anbernic,rg351v
           - const: rockchip,rk3326
 
       - description: Anbernic RG353P
@@ -95,22 +97,30 @@
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Cool Pi Compute Module 5(CM5) EVB
+        items:
+          - enum:
+              - coolpi,pi-cm5-evb
+          - const: coolpi,pi-cm5
+          - const: rockchip,rk3588
+
+      - description: Cool Pi 4 Model B
+        items:
+          - const: coolpi,pi-4b
+          - const: rockchip,rk3588s
+
       - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
         items:
           - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
           - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
           - const: rockchip,rv1126
 
-      - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards
+      - description: Edgeble Neural Compute Module 6(Neu6) SoM based boards
         items:
-          - const: edgeble,neural-compute-module-6a-io  # Edgeble Neural Compute Module 6A IO Board
-          - const: edgeble,neural-compute-module-6a     # Edgeble Neural Compute Module 6A SoM
-          - const: rockchip,rk3588
-
-      - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
-        items:
-          - const: edgeble,neural-compute-module-6b-io  # Edgeble Neural Compute Module 6B IO Board
-          - const: edgeble,neural-compute-module-6b     # Edgeble Neural Compute Module 6B SoM
+          - const: edgeble,neural-compute-module-6a-io  # Edgeble NCM6A-IO Board
+          - enum:
+              - edgeble,neural-compute-module-6a        # Edgeble Neural Compute Module 6A SoM
+              - edgeble,neural-compute-module-6b        # Edgeble Neural Compute Module 6B SoM
           - const: rockchip,rk3588
 
       - description: Elgin RV1108 R1
@@ -237,6 +247,11 @@
           - const: geekbuying,geekbox
           - const: rockchip,rk3368
 
+      - description: Geniatech XPI-3128
+        items:
+          - const: geniatech,xpi-3128
+          - const: rockchip,rk3128
+
       - description: Google Bob (Asus Chromebook Flip C101PA)
         items:
           - const: google,bob-rev13
@@ -674,9 +689,12 @@
           - const: pine64,soquartz
           - const: rockchip,rk3566
 
-      - description: Powkiddy RGB30
+      - description: Powkiddy RK3566 Handheld Gaming Console
         items:
-          - const: powkiddy,rgb30
+          - enum:
+              - powkiddy,rgb30
+              - powkiddy,rk2023
+              - powkiddy,x55
           - const: rockchip,rk3566
 
       - description: Radxa Compute Module 3(CM3)
@@ -875,6 +893,11 @@
           - const: tsd,rk3399-puma-haikou
           - const: rockchip,rk3399
 
+      - description: Theobroma Systems RK3588-SBC Jaguar
+        items:
+          - const: tsd,rk3588-jaguar
+          - const: rockchip,rk3588
+
       - description: Tronsmart Orion R68 Meta
         items:
           - const: tronsmart,orion-r68-meta
@@ -922,6 +945,13 @@
           - const: rockchip,rk3568-bpi-r2pro
           - const: rockchip,rk3568
 
+      - description: Sonoff iHost Smart Home Hub
+        items:
+          - const: itead,sonoff-ihost
+          - enum:
+              - rockchip,rv1126
+              - rockchip,rv1109
+
 additionalProperties: true
 
 ...

diff --git a/Bindings/arm/samsung/samsung-boards.yaml b/Bindings/arm/samsung/samsung-boards.yaml
index e3ffd81..01dcbd8 100644
--- a/Bindings/arm/samsung/samsung-boards.yaml
+++ b/Bindings/arm/samsung/samsung-boards.yaml

@@ -230,6 +230,12 @@
               - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
           - const: samsung,exynosautov9
 
+      - description: Exynos Auto v920 based boards
+        items:
+          - enum:
+              - samsung,exynosautov920-sadk   # Samsung Exynos Auto v920 SADK
+          - const: samsung,exynosautov920
+
 required:
   - compatible
 

diff --git a/Bindings/arm/sprd/sprd.yaml b/Bindings/arm/sprd/sprd.yaml
index eaa67b8..40fc3c8 100644
--- a/Bindings/arm/sprd/sprd.yaml
+++ b/Bindings/arm/sprd/sprd.yaml

@@ -35,6 +35,11 @@
               - sprd,ums512-1h10
           - const: sprd,ums512
 
+      - items:
+          - enum:
+              - sprd,ums9620-2h10
+          - const: sprd,ums9620
+
 additionalProperties: true
 
 ...

diff --git a/Bindings/arm/stm32/stm32.yaml b/Bindings/arm/stm32/stm32.yaml
index df087c8..bc2f433 100644
--- a/Bindings/arm/stm32/stm32.yaml
+++ b/Bindings/arm/stm32/stm32.yaml

@@ -82,29 +82,19 @@
               - shiratech,stm32mp157a-iot-box # IoT Box
               - shiratech,stm32mp157a-stinger96 # Stinger96
               - st,stm32mp157c-ed1
+              - st,stm32mp157c-ed1-scmi
               - st,stm32mp157a-dk1
+              - st,stm32mp157a-dk1-scmi
               - st,stm32mp157c-dk2
+              - st,stm32mp157c-dk2-scmi
           - const: st,stm32mp157
 
       - items:
-          - const: st,stm32mp157a-dk1-scmi
-          - const: st,stm32mp157a-dk1
-          - const: st,stm32mp157
-      - items:
-          - const: st,stm32mp157c-dk2-scmi
-          - const: st,stm32mp157c-dk2
-          - const: st,stm32mp157
-      - items:
-          - const: st,stm32mp157c-ed1-scmi
-          - const: st,stm32mp157c-ed1
-          - const: st,stm32mp157
-      - items:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
       - items:
           - const: st,stm32mp157c-ev1-scmi
-          - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
 

diff --git a/Bindings/arm/sunxi.yaml b/Bindings/arm/sunxi.yaml
index 11c5ce9..a9d8e85 100644
--- a/Bindings/arm/sunxi.yaml
+++ b/Bindings/arm/sunxi.yaml

@@ -868,6 +868,11 @@
           - const: topwise,a721
           - const: allwinner,sun4i-a10
 
+      - description: Transpeed 8K618-T
+        items:
+          - const: transpeed,8k618-t
+          - const: allwinner,sun50i-h618
+
       - description: Utoo P66
         items:
           - const: utoo,p66
@@ -1013,6 +1018,11 @@
           - const: xunlong,orangepi-zero2
           - const: allwinner,sun50i-h616
 
+      - description: Xunlong OrangePi Zero 2W
+        items:
+          - const: xunlong,orangepi-zero2w
+          - const: allwinner,sun50i-h618
+
       - description: Xunlong OrangePi Zero 3
         items:
           - const: xunlong,orangepi-zero3

diff --git a/Bindings/arm/ti/k3.yaml b/Bindings/arm/ti/k3.yaml
index 03d2a0d..c6506bc 100644
--- a/Bindings/arm/ti/k3.yaml
+++ b/Bindings/arm/ti/k3.yaml

@@ -50,6 +50,7 @@
           - enum:
               - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia
               - toradex,verdin-am62-nonwifi-dev    # Verdin AM62 Module on Verdin Development Board
+              - toradex,verdin-am62-nonwifi-mallow # Verdin AM62 Module on Mallow
               - toradex,verdin-am62-nonwifi-yavia  # Verdin AM62 Module on Yavia
           - const: toradex,verdin-am62-nonwifi     # Verdin AM62 Module without Wi-Fi / BT
           - const: toradex,verdin-am62             # Verdin AM62 Module
@@ -60,6 +61,7 @@
           - enum:
               - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia
               - toradex,verdin-am62-wifi-dev    # Verdin AM62 Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-am62-wifi-mallow # Verdin AM62 Wi-Fi / BT Module on Mallow
               - toradex,verdin-am62-wifi-yavia  # Verdin AM62 Wi-Fi / BT Module on Yavia
           - const: toradex,verdin-am62-wifi     # Verdin AM62 Wi-Fi / BT Module
           - const: toradex,verdin-am62          # Verdin AM62 Module

diff --git a/Bindings/arm/ti/omap.yaml b/Bindings/arm/ti/omap.yaml
index b18fc04..93e04a1 100644
--- a/Bindings/arm/ti/omap.yaml
+++ b/Bindings/arm/ti/omap.yaml

@@ -134,6 +134,8 @@
               - amazon,omap4-kc1        # Amazon Kindle Fire (first generation)
               - motorola,droid4         # Motorola Droid 4 XT894
               - motorola,droid-bionic   # Motorola Droid Bionic XT875
+              - motorola,xyboard-mz609
+              - motorola,xyboard-mz617
               - ti,omap4-panda
               - ti,omap4-sdp
           - const: ti,omap4430

diff --git a/Bindings/ata/ceva,ahci-1v84.yaml b/Bindings/ata/ceva,ahci-1v84.yaml
index b29ce59..9952e0e 100644
--- a/Bindings/ata/ceva,ahci-1v84.yaml
+++ b/Bindings/ata/ceva,ahci-1v84.yaml

@@ -7,7 +7,8 @@
 title: Ceva AHCI SATA Controller
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 description: |
   The Ceva SATA controller mostly conforms to the AHCI interface with some

diff --git a/Bindings/auxdisplay/hit,hd44780.yaml b/Bindings/auxdisplay/hit,hd44780.yaml
index fde07e4..406a922 100644
--- a/Bindings/auxdisplay/hit,hd44780.yaml
+++ b/Bindings/auxdisplay/hit,hd44780.yaml

@@ -113,7 +113,7 @@
     hd44780 {
             compatible = "hit,hd44780";
             display-height-chars = <2>;
-            display-width-chars  = <16>;
+            display-width-chars = <16>;
             data-gpios = <&pcf8574 4 0>,
                          <&pcf8574 5 0>,
                          <&pcf8574 6 0>,

diff --git a/Bindings/cache/qcom,llcc.yaml b/Bindings/cache/qcom,llcc.yaml
index 580f9a9..07ccbda 100644
--- a/Bindings/cache/qcom,llcc.yaml
+++ b/Bindings/cache/qcom,llcc.yaml

@@ -33,6 +33,8 @@
       - qcom,sm8350-llcc
       - qcom,sm8450-llcc
       - qcom,sm8550-llcc
+      - qcom,sm8650-llcc
+      - qcom,x1e80100-llcc
 
   reg:
     minItems: 2
@@ -64,6 +66,7 @@
         compatible:
           contains:
             enum:
+              - qcom,qdu1000-llcc
               - qcom,sc7180-llcc
               - qcom,sm6350-llcc
     then:
@@ -101,9 +104,9 @@
         compatible:
           contains:
             enum:
-              - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
+              - qcom,x1e80100-llcc
     then:
       properties:
         reg:

diff --git a/Bindings/cache/sifive,ccache0.yaml b/Bindings/cache/sifive,ccache0.yaml
index 8a6a78e..7e8cebe 100644
--- a/Bindings/cache/sifive,ccache0.yaml
+++ b/Bindings/cache/sifive,ccache0.yaml

@@ -38,7 +38,9 @@
               - sifive,fu740-c000-ccache
           - const: cache
       - items:
-          - const: starfive,jh7110-ccache
+          - enum:
+              - starfive,jh7100-ccache
+              - starfive,jh7110-ccache
           - const: sifive,ccache0
           - const: cache
       - items:
@@ -88,6 +90,7 @@
           contains:
             enum:
               - sifive,fu740-c000-ccache
+              - starfive,jh7100-ccache
               - starfive,jh7110-ccache
               - microchip,mpfs-ccache
 
@@ -111,6 +114,7 @@
           contains:
             enum:
               - sifive,fu740-c000-ccache
+              - starfive,jh7100-ccache
               - starfive,jh7110-ccache
 
     then:

diff --git a/Bindings/clock/baikal,bt1-ccu-pll.yaml b/Bindings/clock/baikal,bt1-ccu-pll.yaml
index 624984d..7f8d982 100644
--- a/Bindings/clock/baikal,bt1-ccu-pll.yaml
+++ b/Bindings/clock/baikal,bt1-ccu-pll.yaml

@@ -125,7 +125,7 @@
     clk25m: clock-oscillator-25m {
       compatible = "fixed-clock";
       #clock-cells = <0>;
-      clock-frequency  = <25000000>;
+      clock-frequency = <25000000>;
       clock-output-names = "clk25m";
     };
 ...

diff --git a/Bindings/clock/brcm,kona-ccu.txt b/Bindings/clock/brcm,kona-ccu.txt
deleted file mode 100644
index 8e5a7d8..0000000
--- a/Bindings/clock/brcm,kona-ccu.txt
+++ /dev/null

@@ -1,138 +0,0 @@
-Broadcom Kona Family Clocks
-
-This binding is associated with Broadcom SoCs having "Kona" style
-clock control units (CCUs).  A CCU is a clock provider that manages
-a set of clock signals.  Each CCU is represented by a node in the
-device tree.
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible
-	Shall have a value of the form "brcm,<model>-<which>-ccu",
-	where <model> is a Broadcom SoC model number and <which> is
-	the name of a defined CCU.  For example:
-	    "brcm,bcm11351-root-ccu"
-	The compatible strings used for each supported SoC family
-	are defined below.
-- reg
-	Shall define the base and range of the address space
-	containing clock control registers
-- #clock-cells
-	Shall have value <1>.  The permitted clock-specifier values
-	are defined below.
-- clock-output-names
-	Shall be an ordered list of strings defining the names of
-	the clocks provided by the CCU.
-
-Device tree example:
-
-	slave_ccu: slave_ccu {
-		compatible = "brcm,bcm11351-slave-ccu";
-		reg = <0x3e011000 0x0f00>;
-		#clock-cells = <1>;
-		clock-output-names = "uartb",
-				     "uartb2",
-				     "uartb3",
-				     "uartb4";
-	};
-
-	ref_crystal_clk: ref_crystal {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		reg = <0x3e002000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-BCM281XX family
----------------
-CCU compatible string values for SoCs in the BCM281XX family are:
-    "brcm,bcm11351-root-ccu"
-    "brcm,bcm11351-aon-ccu"
-    "brcm,bcm11351-hub-ccu"
-    "brcm,bcm11351-master-ccu"
-    "brcm,bcm11351-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM281XX family clocks.  When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used.  These specifiers are defined in:
-    "include/dt-bindings/clock/bcm281xx.h"
-
-    CCU     Clock           Type    Index   Specifier
-    ---     -----           ----    -----   ---------
-    root    frac_1m         peri      0     BCM281XX_ROOT_CCU_FRAC_1M
-
-    aon     hub_timer       peri      0     BCM281XX_AON_CCU_HUB_TIMER
-    aon     pmu_bsc         peri      1     BCM281XX_AON_CCU_PMU_BSC
-    aon     pmu_bsc_var     peri      2     BCM281XX_AON_CCU_PMU_BSC_VAR
-
-    hub     tmon_1m         peri      0     BCM281XX_HUB_CCU_TMON_1M
-
-    master  sdio1           peri      0     BCM281XX_MASTER_CCU_SDIO1
-    master  sdio2           peri      1     BCM281XX_MASTER_CCU_SDIO2
-    master  sdio3           peri      2     BCM281XX_MASTER_CCU_SDIO3
-    master  sdio4           peri      3     BCM281XX_MASTER_CCU_SDIO4
-    master  dmac            peri      4     BCM281XX_MASTER_CCU_DMAC
-    master  usb_ic          peri      5     BCM281XX_MASTER_CCU_USB_IC
-    master  hsic2_48m       peri      6     BCM281XX_MASTER_CCU_HSIC_48M
-    master  hsic2_12m       peri      7     BCM281XX_MASTER_CCU_HSIC_12M
-
-    slave   uartb           peri      0     BCM281XX_SLAVE_CCU_UARTB
-    slave   uartb2          peri      1     BCM281XX_SLAVE_CCU_UARTB2
-    slave   uartb3          peri      2     BCM281XX_SLAVE_CCU_UARTB3
-    slave   uartb4          peri      3     BCM281XX_SLAVE_CCU_UARTB4
-    slave   ssp0            peri      4     BCM281XX_SLAVE_CCU_SSP0
-    slave   ssp2            peri      5     BCM281XX_SLAVE_CCU_SSP2
-    slave   bsc1            peri      6     BCM281XX_SLAVE_CCU_BSC1
-    slave   bsc2            peri      7     BCM281XX_SLAVE_CCU_BSC2
-    slave   bsc3            peri      8     BCM281XX_SLAVE_CCU_BSC3
-    slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
-
-
-BCM21664 family
----------------
-CCU compatible string values for SoCs in the BCM21664 family are:
-    "brcm,bcm21664-root-ccu"
-    "brcm,bcm21664-aon-ccu"
-    "brcm,bcm21664-master-ccu"
-    "brcm,bcm21664-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM21664 family clocks.  When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used.  These specifiers are defined in:
-    "include/dt-bindings/clock/bcm21664.h"
-
-    CCU     Clock           Type    Index   Specifier
-    ---     -----           ----    -----   ---------
-    root    frac_1m         peri      0     BCM21664_ROOT_CCU_FRAC_1M
-
-    aon     hub_timer       peri      0     BCM21664_AON_CCU_HUB_TIMER
-
-    master  sdio1           peri      0     BCM21664_MASTER_CCU_SDIO1
-    master  sdio2           peri      1     BCM21664_MASTER_CCU_SDIO2
-    master  sdio3           peri      2     BCM21664_MASTER_CCU_SDIO3
-    master  sdio4           peri      3     BCM21664_MASTER_CCU_SDIO4
-    master  sdio1_sleep     peri      4     BCM21664_MASTER_CCU_SDIO1_SLEEP
-    master  sdio2_sleep     peri      5     BCM21664_MASTER_CCU_SDIO2_SLEEP
-    master  sdio3_sleep     peri      6     BCM21664_MASTER_CCU_SDIO3_SLEEP
-    master  sdio4_sleep     peri      7     BCM21664_MASTER_CCU_SDIO4_SLEEP
-
-    slave   uartb           peri      0     BCM21664_SLAVE_CCU_UARTB
-    slave   uartb2          peri      1     BCM21664_SLAVE_CCU_UARTB2
-    slave   uartb3          peri      2     BCM21664_SLAVE_CCU_UARTB3
-    slave   uartb4          peri      3     BCM21664_SLAVE_CCU_UARTB4
-    slave   bsc1            peri      4     BCM21664_SLAVE_CCU_BSC1
-    slave   bsc2            peri      5     BCM21664_SLAVE_CCU_BSC2
-    slave   bsc3            peri      6     BCM21664_SLAVE_CCU_BSC3
-    slave   bsc4            peri      7     BCM21664_SLAVE_CCU_BSC4

diff --git a/Bindings/clock/brcm,kona-ccu.yaml b/Bindings/clock/brcm,kona-ccu.yaml
new file mode 100644
index 0000000..e565695
--- /dev/null
+++ b/Bindings/clock/brcm,kona-ccu.yaml

@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,kona-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family clock control units (CCU)
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description: |
+  Broadcom "Kona" style clock control unit (CCU) is a clock provider that
+  manages a set of clock signals.
+
+  All available clock IDs are defined in
+  - include/dt-bindings/clock/bcm281xx.h for BCM281XX family
+  - include/dt-bindings/clock/bcm21664.h for BCM21664 family
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm11351-aon-ccu
+      - brcm,bcm11351-hub-ccu
+      - brcm,bcm11351-master-ccu
+      - brcm,bcm11351-root-ccu
+      - brcm,bcm11351-slave-ccu
+      - brcm,bcm21664-aon-ccu
+      - brcm,bcm21664-master-ccu
+      - brcm,bcm21664-root-ccu
+      - brcm,bcm21664-slave-ccu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 10
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clock-output-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-aon-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: hub_timer
+            - const: pmu_bsc
+            - const: pmu_bsc_var
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-hub-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: tmon_1m
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-master-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: sdio1
+            - const: sdio2
+            - const: sdio3
+            - const: sdio4
+            - const: usb_ic
+            - const: hsic2_48m
+            - const: hsic2_12m
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm11351-root-ccu
+              - brcm,bcm21664-root-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: frac_1m
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-slave-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: uartb
+            - const: uartb2
+            - const: uartb3
+            - const: uartb4
+            - const: ssp0
+            - const: ssp2
+            - const: bsc1
+            - const: bsc2
+            - const: bsc3
+            - const: pwm
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-aon-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: hub_timer
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-master-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: sdio1
+            - const: sdio2
+            - const: sdio3
+            - const: sdio4
+            - const: sdio1_sleep
+            - const: sdio2_sleep
+            - const: sdio3_sleep
+            - const: sdio4_sleep
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-slave-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: uartb
+            - const: uartb2
+            - const: uartb3
+            - const: bsc1
+            - const: bsc2
+            - const: bsc3
+            - const: bsc4
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3e011000 {
+      compatible = "brcm,bcm11351-slave-ccu";
+      reg = <0x3e011000 0x0f00>;
+      #clock-cells = <1>;
+      clock-output-names = "uartb",
+                           "uartb2",
+                           "uartb3",
+                           "uartb4",
+                           "ssp0",
+                           "ssp2",
+                           "bsc1",
+                           "bsc2",
+                           "bsc3",
+                           "pwm";
+    };
+...

diff --git a/Bindings/clock/fsl,imx93-anatop.yaml b/Bindings/clock/fsl,imx93-anatop.yaml
new file mode 100644
index 0000000..8a3b247
--- /dev/null
+++ b/Bindings/clock/fsl,imx93-anatop.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx93-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 ANATOP Clock Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX93 ANATOP module which contains PLL and OSC to Clock Controller
+  Module.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-anatop
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@44480000 {
+        compatible = "fsl,imx93-anatop";
+        reg = <0x44480000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+...

diff --git a/Bindings/clock/google,gs101-clock.yaml b/Bindings/clock/google,gs101-clock.yaml
new file mode 100644
index 0000000..ca7fdad
--- /dev/null
+++ b/Bindings/clock/google,gs101-clock.yaml

@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google GS101 SoC clock controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  Google GS101 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that clock tree
+  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
+  clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/gs101.h' header.
+
+properties:
+  compatible:
+    enum:
+      - google,gs101-cmu-top
+      - google,gs101-cmu-apm
+      - google,gs101-cmu-misc
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-top
+              - google,gs101-cmu-apm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-misc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Misc bus clock (from CMU_TOP)
+            - description: Misc sss clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: bus
+            - const: sss
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_TOP
+  - |
+    #include <dt-bindings/clock/google,gs101.h>
+
+    cmu_top: clock-controller@1e080000 {
+        compatible = "google,gs101-cmu-top";
+        reg = <0x1e080000 0x8000>;
+        #clock-cells = <1>;
+        clocks = <&ext_24_5m>;
+        clock-names = "oscclk";
+    };
+
+...

diff --git a/Bindings/clock/hi3620-clock.txt b/Bindings/clock/hi3620-clock.txt
deleted file mode 100644
index dad6269..0000000
--- a/Bindings/clock/hi3620-clock.txt
+++ /dev/null

@@ -1,20 +0,0 @@
-* Hisilicon Hi3620 Clock Controller
-
-The Hi3620 clock controller generates and supplies clock to various
-controllers within the Hi3620 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
-  - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.

diff --git a/Bindings/clock/mediatek,apmixedsys.yaml b/Bindings/clock/mediatek,apmixedsys.yaml
index 372c1d7..6855358 100644
--- a/Bindings/clock/mediatek,apmixedsys.yaml
+++ b/Bindings/clock/mediatek,apmixedsys.yaml

@@ -22,6 +22,7 @@
           - mediatek,mt7622-apmixedsys
           - mediatek,mt7981-apmixedsys
           - mediatek,mt7986-apmixedsys
+          - mediatek,mt7988-apmixedsys
           - mediatek,mt8135-apmixedsys
           - mediatek,mt8173-apmixedsys
           - mediatek,mt8516-apmixedsys

diff --git a/Bindings/clock/mediatek,ethsys.yaml b/Bindings/clock/mediatek,ethsys.yaml
new file mode 100644
index 0000000..f9cddac
--- /dev/null
+++ b/Bindings/clock/mediatek,ethsys.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ethsys controller
+
+description:
+  The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+maintainers:
+  - James Liao <jamesjj.liao@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-ethsys
+              - mediatek,mt7622-ethsys
+              - mediatek,mt7629-ethsys
+              - mediatek,mt7981-ethsys
+              - mediatek,mt7986-ethsys
+              - mediatek,mt7988-ethsys
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-ethsys
+          - const: mediatek,mt2701-ethsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1b000000 {
+        compatible = "mediatek,mt2701-ethsys", "syscon";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };

diff --git a/Bindings/clock/mediatek,mt7988-ethwarp.yaml b/Bindings/clock/mediatek,mt7988-ethwarp.yaml
new file mode 100644
index 0000000..e32a025
--- /dev/null
+++ b/Bindings/clock/mediatek,mt7988-ethwarp.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-ethwarp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 ethwarp Controller
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The Mediatek MT7988 ethwarp controller provides clocks and resets for the
+  Ethernet related subsystems found the MT7988 SoC.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7988-ethwarp
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/ti-syscon.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@15031000 {
+            compatible = "mediatek,mt7988-ethwarp";
+            reg = <0 0x15031000 0 0x1000>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };

diff --git a/Bindings/clock/mediatek,mt7988-xfi-pll.yaml b/Bindings/clock/mediatek,mt7988-xfi-pll.yaml
new file mode 100644
index 0000000..192f145
--- /dev/null
+++ b/Bindings/clock/mediatek,mt7988-xfi-pll.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-xfi-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI PLL Clock Controller
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The MediaTek XFI PLL controller provides the 156.25MHz clock for the
+  Ethernet SerDes PHY from the 40MHz top_xtal clock.
+
+properties:
+  compatible:
+    const: mediatek,mt7988-xfi-pll
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - resets
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        clock-controller@11f40000 {
+            compatible = "mediatek,mt7988-xfi-pll";
+            reg = <0 0x11f40000 0 0x1000>;
+            resets = <&watchdog 16>;
+            #clock-cells = <1>;
+        };
+    };

diff --git a/Bindings/clock/mediatek,mt8188-clock.yaml b/Bindings/clock/mediatek,mt8188-clock.yaml
index d7214d9..8605703 100644
--- a/Bindings/clock/mediatek,mt8188-clock.yaml
+++ b/Bindings/clock/mediatek,mt8188-clock.yaml

@@ -43,8 +43,6 @@
       - mediatek,mt8188-vdecsys
       - mediatek,mt8188-vdecsys-soc
       - mediatek,mt8188-vencsys
-      - mediatek,mt8188-vppsys0
-      - mediatek,mt8188-vppsys1
       - mediatek,mt8188-wpesys
       - mediatek,mt8188-wpesys-vpp0
 

diff --git a/Bindings/clock/mediatek,topckgen.yaml b/Bindings/clock/mediatek,topckgen.yaml
index 6d087de..bdf3b55 100644
--- a/Bindings/clock/mediatek,topckgen.yaml
+++ b/Bindings/clock/mediatek,topckgen.yaml

@@ -37,6 +37,8 @@
               - mediatek,mt7629-topckgen
               - mediatek,mt7981-topckgen
               - mediatek,mt7986-topckgen
+              - mediatek,mt7988-mcusys
+              - mediatek,mt7988-topckgen
               - mediatek,mt8167-topckgen
               - mediatek,mt8183-topckgen
           - const: syscon

diff --git a/Bindings/clock/qcom,a53pll.yaml b/Bindings/clock/qcom,a53pll.yaml
index 9436266..5ca927a 100644
--- a/Bindings/clock/qcom,a53pll.yaml
+++ b/Bindings/clock/qcom,a53pll.yaml

@@ -16,6 +16,7 @@
 properties:
   compatible:
     enum:
+      - qcom,ipq5018-a53pll
       - qcom,ipq5332-a53pll
       - qcom,ipq6018-a53pll
       - qcom,ipq8074-a53pll

diff --git a/Bindings/clock/qcom,camcc-sm8250.yaml b/Bindings/clock/qcom,camcc-sm8250.yaml
index 426335a..3fd3dc1 100644
--- a/Bindings/clock/qcom,camcc-sm8250.yaml
+++ b/Bindings/clock/qcom,camcc-sm8250.yaml

@@ -15,6 +15,9 @@
 
   See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sm8250-camcc
@@ -33,15 +36,6 @@
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   power-domains:
     items:
       - description: MMCX power domain
@@ -56,14 +50,10 @@
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/clock/qcom,gcc-ipq6018.yaml b/Bindings/clock/qcom,gcc-ipq6018.yaml
new file mode 100644
index 0000000..af5d883
--- /dev/null
+++ b/Bindings/clock/qcom,gcc-ipq6018.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq6018.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ6018
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Robert Marko <robimarko@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ6018.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq6018.h
+    include/dt-bindings/reset/qcom,gcc-ipq6018.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq6018
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq6018";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo>, <&sleep_clk>;
+      clock-names = "xo", "sleep_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...

diff --git a/Bindings/clock/qcom,gcc-ipq8074.yaml b/Bindings/clock/qcom,gcc-ipq8074.yaml
index 52e7831..2d44ddc 100644
--- a/Bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Bindings/clock/qcom,gcc-ipq8074.yaml

@@ -27,11 +27,15 @@
     items:
       - description: board XO clock
       - description: sleep clock
+      - description: Gen3 QMP PCIe PHY PIPE clock
+      - description: Gen2 QMP PCIe PHY PIPE clock
 
   clock-names:
     items:
       - const: xo
       - const: sleep_clk
+      - const: pcie0_pipe
+      - const: pcie1_pipe
 
 required:
   - compatible

diff --git a/Bindings/clock/qcom,gcc-other.yaml b/Bindings/clock/qcom,gcc-other.yaml
index 559fc21..7d05f0f 100644
--- a/Bindings/clock/qcom,gcc-other.yaml
+++ b/Bindings/clock/qcom,gcc-other.yaml

@@ -15,8 +15,6 @@
   domains.
 
   See also::
-    include/dt-bindings/clock/qcom,gcc-ipq6018.h
-    include/dt-bindings/reset/qcom,gcc-ipq6018.h
     include/dt-bindings/clock/qcom,gcc-msm8953.h
     include/dt-bindings/clock/qcom,gcc-mdm9607.h
 
@@ -26,7 +24,6 @@
 properties:
   compatible:
     enum:
-      - qcom,gcc-ipq6018
       - qcom,gcc-mdm9607
 
 required:

diff --git a/Bindings/clock/qcom,qdu1000-ecpricc.yaml b/Bindings/clock/qcom,qdu1000-ecpricc.yaml
new file mode 100644
index 0000000..fd21df0
--- /dev/null
+++ b/Bindings/clock/qcom,qdu1000-ecpricc.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-ecpricc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ECPRI Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm ECPRI Specification V2.0 Common Public Radio Interface clock control
+  module which supports the clocks, resets on QDU1000 and QRU1000
+
+  See also:: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-ecpricc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL1 source from GCC
+      - description: GPLL2 source from GCC
+      - description: GPLL3 source from GCC
+      - description: GPLL4 source from GCC
+      - description: GPLL5 source from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@280000 {
+      compatible = "qcom,qdu1000-ecpricc";
+      reg = <0x00280000 0x31c00>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };

diff --git a/Bindings/clock/qcom,rpmhcc.yaml b/Bindings/clock/qcom,rpmhcc.yaml
index 4eb5e59..ca85794 100644
--- a/Bindings/clock/qcom,rpmhcc.yaml
+++ b/Bindings/clock/qcom,rpmhcc.yaml

@@ -35,6 +35,8 @@
       - qcom,sm8350-rpmh-clk
       - qcom,sm8450-rpmh-clk
       - qcom,sm8550-rpmh-clk
+      - qcom,sm8650-rpmh-clk
+      - qcom,x1e80100-rpmh-clk
 
   clocks:
     maxItems: 1

diff --git a/Bindings/clock/qcom,sc7180-camcc.yaml b/Bindings/clock/qcom,sc7180-camcc.yaml
index 2dfc2a4..c7fe640 100644
--- a/Bindings/clock/qcom,sc7180-camcc.yaml
+++ b/Bindings/clock/qcom,sc7180-camcc.yaml

@@ -15,6 +15,9 @@
 
   See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sc7180-camcc
@@ -31,28 +34,15 @@
       - const: iface
       - const: xo
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/clock/qcom,sc7280-camcc.yaml b/Bindings/clock/qcom,sc7280-camcc.yaml
index 01feef1..dcef8de 100644
--- a/Bindings/clock/qcom,sc7280-camcc.yaml
+++ b/Bindings/clock/qcom,sc7280-camcc.yaml

@@ -15,6 +15,9 @@
 
   See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sc7280-camcc
@@ -31,28 +34,15 @@
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/clock/qcom,sdm845-camcc.yaml b/Bindings/clock/qcom,sdm845-camcc.yaml
index 91d1f79..810b852 100644
--- a/Bindings/clock/qcom,sdm845-camcc.yaml
+++ b/Bindings/clock/qcom,sdm845-camcc.yaml

@@ -15,6 +15,9 @@
 
   See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 properties:
   compatible:
     const: qcom,sdm845-camcc
@@ -27,28 +30,15 @@
     items:
       - const: bi_tcxo
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/clock/qcom,sm8450-camcc.yaml b/Bindings/clock/qcom,sm8450-camcc.yaml
index dc3c18e..4898646 100644
--- a/Bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Bindings/clock/qcom,sm8450-camcc.yaml

@@ -16,10 +16,15 @@
   See also::
     include/dt-bindings/clock/qcom,sm8450-camcc.h
     include/dt-bindings/clock/qcom,sm8550-camcc.h
+    include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
     enum:
+      - qcom,sc8280xp-camcc
       - qcom,sm8450-camcc
       - qcom,sm8550-camcc
 
@@ -40,29 +45,16 @@
     description:
       A phandle to an OPP node describing required MMCX performance point.
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - power-domains
   - required-opps
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/clock/qcom,sm8450-gpucc.yaml b/Bindings/clock/qcom,sm8450-gpucc.yaml
index 2320be9..1a384e8 100644
--- a/Bindings/clock/qcom,sm8450-gpucc.yaml
+++ b/Bindings/clock/qcom,sm8450-gpucc.yaml

@@ -17,12 +17,14 @@
     include/dt-bindings/clock/qcom,sm8450-gpucc.h
     include/dt-bindings/clock/qcom,sm8550-gpucc.h
     include/dt-bindings/reset/qcom,sm8450-gpucc.h
+    include/dt-bindings/reset/qcom,sm8650-gpucc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8450-gpucc
       - qcom,sm8550-gpucc
+      - qcom,sm8650-gpucc
 
   clocks:
     items:

diff --git a/Bindings/clock/qcom,sm8550-tcsr.yaml b/Bindings/clock/qcom,sm8550-tcsr.yaml
index 1bf1a41..af16b05 100644
--- a/Bindings/clock/qcom,sm8550-tcsr.yaml
+++ b/Bindings/clock/qcom,sm8550-tcsr.yaml

@@ -13,12 +13,16 @@
   Qualcomm TCSR clock control module provides the clocks, resets and
   power domains on SM8550
 
-  See also:: include/dt-bindings/clock/qcom,sm8550-tcsr.h
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-tcsr.h
+  - include/dt-bindings/clock/qcom,sm8650-tcsr.h
 
 properties:
   compatible:
     items:
-      - const: qcom,sm8550-tcsr
+      - enum:
+          - qcom,sm8550-tcsr
+          - qcom,sm8650-tcsr
       - const: syscon
 
   clocks:

diff --git a/Bindings/clock/qcom,sm8650-dispcc.yaml b/Bindings/clock/qcom,sm8650-dispcc.yaml
new file mode 100644
index 0000000..5e0c45c
--- /dev/null
+++ b/Bindings/clock/qcom,sm8650-dispcc.yaml

@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8650
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8650.
+
+  See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8650-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8650-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp0_phy 0>,
+               <&dp0_phy 1>,
+               <&dp1_phy 0>,
+               <&dp1_phy 1>,
+               <&dp2_phy 0>,
+               <&dp2_phy 1>,
+               <&dp3_phy 0>,
+               <&dp3_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...

diff --git a/Bindings/clock/qcom,sm8650-gcc.yaml b/Bindings/clock/qcom,sm8650-gcc.yaml
new file mode 100644
index 0000000..b54761c
--- /dev/null
+++ b/Bindings/clock/qcom,sm8650-gcc.yaml

@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8650-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8650
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8650
+
+  See also:: include/dt-bindings/clock/qcom,sm8650-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8650-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8650-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...

diff --git a/Bindings/clock/qcom,x1e80100-gcc.yaml b/Bindings/clock/qcom,x1e80100-gcc.yaml
new file mode 100644
index 0000000..14a796d
--- /dev/null
+++ b/Bindings/clock/qcom,x1e80100-gcc.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,x1e80100-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on X1E80100
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on X1E80100
+
+  See also:: include/dt-bindings/clock/qcom,x1e80100-gcc.h
+
+properties:
+  compatible:
+    const: qcom,x1e80100-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIe 3 pipe clock
+      - description: PCIe 4 pipe clock
+      - description: PCIe 5 pipe clock
+      - description: PCIe 6a pipe clock
+      - description: PCIe 6b pipe clock
+      - description: USB QMP Phy 0 clock source
+      - description: USB QMP Phy 1 clock source
+      - description: USB QMP Phy 2 clock source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@100000 {
+      compatible = "qcom,x1e80100-gcc";
+      reg = <0x00100000 0x200000>;
+      clocks = <&bi_tcxo_div2>,
+               <&sleep_clk>,
+               <&pcie3_phy>,
+               <&pcie4_phy>,
+               <&pcie5_phy>,
+               <&pcie6a_phy>,
+               <&pcie6b_phy>,
+               <&usb_1_ss0_qmpphy 0>,
+               <&usb_1_ss1_qmpphy 1>,
+               <&usb_1_ss2_qmpphy 2>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...

diff --git a/Bindings/clock/renesas,9series.yaml b/Bindings/clock/renesas,9series.yaml
index 3afdebd..af63196 100644
--- a/Bindings/clock/renesas,9series.yaml
+++ b/Bindings/clock/renesas,9series.yaml

@@ -21,6 +21,15 @@
     1 -- DIF1
     2 -- DIF2
     3 -- DIF3
+  - 9FGV0841:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3
+    4 -- DIF4
+    5 -- DIF5
+    6 -- DIF6
+    7 -- DIF7
 
 maintainers:
   - Marek Vasut <marex@denx.de>
@@ -30,6 +39,7 @@
     enum:
       - renesas,9fgv0241
       - renesas,9fgv0441
+      - renesas,9fgv0841
 
   reg:
     description: I2C device address

diff --git a/Bindings/clock/silabs,si5351.txt b/Bindings/clock/silabs,si5351.txt
deleted file mode 100644
index bfda6af..0000000
--- a/Bindings/clock/silabs,si5351.txt
+++ /dev/null

@@ -1,126 +0,0 @@
-Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
-
-Reference
-[1] Si5351A/B/C Data Sheet
-    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
-
-The Si5351a/b/c are programmable i2c clock generators with up to 8 output
-clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
-3 output clocks are accessible. The internal structure of the clock
-generators can be found in [1].
-
-==I2C device node==
-
-Required properties:
-- compatible: shall be one of the following:
-	"silabs,si5351a" - Si5351a, QFN20 package
-	"silabs,si5351a-msop" - Si5351a, MSOP10 package
-	"silabs,si5351b" - Si5351b, QFN20 package
-	"silabs,si5351c" - Si5351c, QFN20 package
-- reg: i2c device address, shall be 0x60 or 0x61.
-- #clock-cells: from common clock binding; shall be set to 1.
-- clocks: from common clock binding; list of parent clock
-  handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only. Corresponding clock input names are "xtal" and
-  "clkin" respectively.
-- #address-cells: shall be set to 1.
-- #size-cells: shall be set to 0.
-
-Optional properties:
-- silabs,pll-source: pair of (number, source) for each pll. Allows
-  to overwrite clock source of pll A (number=0) or B (number=1).
-
-==Child nodes==
-
-Each of the clock outputs can be overwritten individually by
-using a child node to the I2C device node. If a child node for a clock
-output is not set, the eeprom configuration is not overwritten.
-
-Required child node properties:
-- reg: number of clock output.
-
-Optional child node properties:
-- silabs,clock-source: source clock of the output divider stage N, shall be
-  0 = multisynth N
-  1 = multisynth 0 for output clocks 0-3, else multisynth4
-  2 = xtal
-  3 = clkin (si5351c only)
-- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
-- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
-  divider.
-- silabs,pll-master: boolean, multisynth can change pll frequency.
-- silabs,pll-reset: boolean, clock output can reset its pll.
-- silabs,disable-state : clock output disable state, shall be
-  0 = clock output is driven LOW when disabled
-  1 = clock output is driven HIGH when disabled
-  2 = clock output is FLOATING (HIGH-Z) when disabled
-  3 = clock output is NEVER disabled
-
-==Example==
-
-/* 25MHz reference crystal */
-ref25: ref25M {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <25000000>;
-};
-
-i2c-master-node {
-
-	/* Si5351a msop10 i2c clock generator */
-	si5351a: clock-generator@60 {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-		clock-names = "xtal";
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		/*
-		 * overwrite clkout0 configuration with:
-		 * - 8mA output drive strength
-		 * - pll0 as clock source of multisynth0
-		 * - multisynth0 as clock source of output divider
-		 * - multisynth0 can change pll0
-		 * - set initial clock frequency of 74.25MHz
-		 */
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-			clock-frequency = <74250000>;
-		};
-
-		/*
-		 * overwrite clkout1 configuration with:
-		 * - 4mA output drive strength
-		 * - pll1 as clock source of multisynth1
-		 * - multisynth1 as clock source of output divider
-		 * - multisynth1 can change pll1
-		 */
-		clkout1 {
-			reg = <1>;
-			silabs,drive-strength = <4>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			pll-master;
-		};
-
-		/*
-		 * overwrite clkout2 configuration with:
-		 * - xtal as clock source of output divider
-		 */
-		clkout2 {
-			reg = <2>;
-			silabs,clock-source = <2>;
-		};
-	};
-};

diff --git a/Bindings/clock/silabs,si5351.yaml b/Bindings/clock/silabs,si5351.yaml
new file mode 100644
index 0000000..d3e0ec2
--- /dev/null
+++ b/Bindings/clock/silabs,si5351.yaml

@@ -0,0 +1,265 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/silabs,si5351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si5351A/B/C programmable I2C clock generators
+
+description: |
+  The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to
+  8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3
+  output clocks are accessible. The internal structure of the clock generators
+  can be found in [1].
+
+  [1] Si5351A/B/C Data Sheet
+      https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+
+maintainers:
+  - Alvin Šipraga <alsi@bang-olufsen.dk>
+
+properties:
+  compatible:
+    enum:
+      - silabs,si5351a      # Si5351A, 20-QFN package
+      - silabs,si5351a-msop # Si5351A, 10-MSOP package
+      - silabs,si5351b      # Si5351B, 20-QFN package
+      - silabs,si5351c      # Si5351C, 20-QFN package
+
+  reg:
+    enum:
+      - 0x60
+      - 0x61
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xtal
+      - const: clkin
+
+  silabs,pll-source:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      A list of cell pairs containing a PLL index and its source. Allows to
+      overwrite clock source of the internal PLLs.
+    items:
+      items:
+        - description: PLL A (0) or PLL B (1)
+          enum: [ 0, 1 ]
+        - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only).
+          enum: [ 0, 1 ]
+
+  silabs,pll-reset-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 2
+    description: A list of cell pairs containing a PLL index and its reset mode.
+    items:
+      items:
+        - description: PLL A (0) or PLL B (1)
+          enum: [ 0, 1 ]
+        - description: |
+            Reset mode for the PLL. Mode can be one of:
+
+                0 - reset whenever PLL rate is adjusted (default mode)
+                1 - do not reset when PLL rate is adjusted
+
+            In mode 1, the PLL is only reset if the silabs,pll-reset is
+            specified in one of the clock output child nodes that also sources
+            the PLL. This mode may be preferable if output clocks are expected
+            to be adjusted without glitches.
+          enum: [ 0, 1 ]
+
+patternProperties:
+  "^clkout@[0-7]$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Clock output number.
+
+      clock-frequency: true
+
+      silabs,clock-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Source clock of the this output's divider stage.
+
+          0 - use multisynth N for this output, where N is the output number
+          1 - use either multisynth 0 (if output number is 0-3) or multisynth 4
+              (otherwise) for this output
+          2 - use XTAL for this output
+          3 - use CLKIN for this output (Si5351C only)
+
+      silabs,drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2, 4, 6, 8 ]
+        description: Output drive strength in mA.
+
+      silabs,multisynth-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1 ]
+        description:
+          Source PLL A (0) or B (1) for the corresponding multisynth divider.
+
+      silabs,pll-master:
+        type: boolean
+        description: |
+          The frequency of the source PLL is allowed to be changed by the
+          multisynth when setting the rate of this clock output.
+
+      silabs,pll-reset:
+        type: boolean
+        description: Reset the source PLL when enabling this clock output.
+
+      silabs,disable-state:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1, 2, 3 ]
+        description: |
+          Clock output disable state. The state can be one of:
+
+          0 - clock output is driven LOW when disabled
+          1 - clock output is driven HIGH when disabled
+          2 - clock output is FLOATING (HIGH-Z) when disabled
+          3 - clock output is never disabled
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: silabs,si5351a-msop
+        then:
+          properties:
+            reg:
+              maximum: 2
+        else:
+          properties:
+            reg:
+              maximum: 7
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: silabs,si5351c
+        then:
+          properties:
+            silabs,clock-source:
+              enum: [ 0, 1, 2, 3 ]
+        else:
+          properties:
+            silabs,clock-source:
+              enum: [ 0, 1, 2 ]
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - silabs,si5351a
+              - silabs,si5351a-msop
+              - silabs,si5351b
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-generator@60 {
+        compatible = "silabs,si5351a-msop";
+        reg = <0x60>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #clock-cells = <1>;
+
+        /* Connect XTAL input to 25MHz reference */
+        clocks = <&ref25>;
+        clock-names = "xtal";
+
+        /* Use XTAL input as source of PLL0 and PLL1 */
+        silabs,pll-source = <0 0>, <1 0>;
+
+        /* Don't reset PLL1 on rate adjustment */
+        silabs,pll-reset-mode = <1 1>;
+
+        /*
+         * Overwrite CLK0 configuration with:
+         * - 8 mA output drive strength
+         * - PLL0 as clock source of multisynth 0
+         * - Multisynth 0 as clock source of output divider
+         * - Multisynth 0 can change PLL0
+         * - Set initial clock frequency of 74.25MHz
+         */
+        clkout@0 {
+          reg = <0>;
+          silabs,drive-strength = <8>;
+          silabs,multisynth-source = <0>;
+          silabs,clock-source = <0>;
+          silabs,pll-master;
+          clock-frequency = <74250000>;
+        };
+
+        /*
+         * Overwrite CLK1 configuration with:
+         * - 4 mA output drive strength
+         * - PLL1 as clock source of multisynth 1
+         * - Multisynth 1 as clock source of output divider
+         * - Multisynth 1 can change PLL1
+         * - Reset PLL1 when enabling this clock output
+         */
+        clkout@1 {
+          reg = <1>;
+          silabs,drive-strength = <4>;
+          silabs,multisynth-source = <1>;
+          silabs,clock-source = <0>;
+          silabs,pll-master;
+          silabs,pll-reset;
+        };
+
+        /*
+         * Overwrite CLK2 configuration with:
+         * - XTAL as clock source of output divider
+         */
+        clkout@2 {
+          reg = <2>;
+          silabs,clock-source = <2>;
+        };
+      };
+    };

diff --git a/Bindings/clock/sophgo,cv1800-clk.yaml b/Bindings/clock/sophgo,cv1800-clk.yaml
new file mode 100644
index 0000000..c1dc246
--- /dev/null
+++ b/Bindings/clock/sophgo,cv1800-clk.yaml

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Series Clock Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+  compatible:
+    enum:
+      - sophgo,cv1800-clk
+      - sophgo,cv1810-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,cv1800.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3002000 {
+        compatible = "sophgo,cv1800-clk";
+        reg = <0x03002000 0x1000>;
+        clocks = <&osc>;
+        #clock-cells = <1>;
+    };
+
+...

diff --git a/Bindings/clock/st,stm32mp25-rcc.yaml b/Bindings/clock/st,stm32mp25-rcc.yaml
new file mode 100644
index 0000000..7732e79
--- /dev/null
+++ b/Bindings/clock/st,stm32mp25-rcc.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp25-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 Reset Clock Controller
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+description: |
+  The RCC hardware block is both a reset and a clock controller.
+  RCC makes also power management (resume/supend).
+
+  See also::
+    include/dt-bindings/clock/st,stm32mp25-rcc.h
+    include/dt-bindings/reset/st,stm32mp25-rcc.h
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-rcc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: CK_SCMI_HSE High Speed External oscillator (8 to 48 MHz)
+      - description: CK_SCMI_HSI High Speed Internal oscillator (~ 64 MHz)
+      - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
+      - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
+      - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
+
+  clock-names:
+    items:
+      - const: hse
+      - const: hsi
+      - const: msi
+      - const: lse
+      - const: lsi
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+
+    rcc: clock-controller@44200000 {
+        compatible = "st,stm32mp25-rcc";
+        reg = <0x44200000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        clock-names = "hse", "hsi", "msi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_MSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
+    };
+...

diff --git a/Bindings/clock/xlnx,clocking-wizard.yaml b/Bindings/clock/xlnx,clocking-wizard.yaml
index 02bd556..9d5324d 100644
--- a/Bindings/clock/xlnx,clocking-wizard.yaml
+++ b/Bindings/clock/xlnx,clocking-wizard.yaml

@@ -20,6 +20,7 @@
       - xlnx,clocking-wizard
       - xlnx,clocking-wizard-v5.2
       - xlnx,clocking-wizard-v6.0
+      - xlnx,versal-clk-wizard
 
 
   reg:

diff --git a/Bindings/clock/xlnx,versal-clk.yaml b/Bindings/clock/xlnx,versal-clk.yaml
index 1ba687d..bef109d 100644
--- a/Bindings/clock/xlnx,versal-clk.yaml
+++ b/Bindings/clock/xlnx,versal-clk.yaml

@@ -31,11 +31,11 @@
   clocks:
     description: List of clock specifiers which are external input
       clocks to the given clock controller.
-    minItems: 3
+    minItems: 2
     maxItems: 8
 
   clock-names:
-    minItems: 3
+    minItems: 2
     maxItems: 8
 
 required:
@@ -59,13 +59,11 @@
         clocks:
           items:
             - description: reference clock
-            - description: alternate reference clock
             - description: alternate reference clock for programmable logic
 
         clock-names:
           items:
             - const: ref
-            - const: alt_ref
             - const: pl_alt_ref
 
   - if:
@@ -73,6 +71,27 @@
         compatible:
           contains:
             enum:
+              - xlnx,versal-net-clk
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: alternate reference clock for programmable logic
+            - description: alternate reference clock
+
+        clock-names:
+          items:
+            - const: ref
+            - const: pl_alt_ref
+            - const: alt_ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - xlnx,zynqmp-clk
 
     then:
@@ -110,8 +129,8 @@
         versal_clk: clock-controller {
           #clock-cells = <1>;
           compatible = "xlnx,versal-clk";
-          clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
-          clock-names = "ref", "alt_ref", "pl_alt_ref";
+          clocks = <&ref>,  <&pl_alt_ref>;
+          clock-names = "ref", "pl_alt_ref";
         };
       };
     };

diff --git a/Bindings/connector/usb-connector.yaml b/Bindings/connector/usb-connector.yaml
index 7c8a3e8..fb216ce 100644
--- a/Bindings/connector/usb-connector.yaml
+++ b/Bindings/connector/usb-connector.yaml

@@ -66,7 +66,6 @@
       Particularly, if use an output GPIO to control a VBUS regulator, should
       model it as a regulator. See bindings/regulator/fixed-regulator.yaml
 
-  # The following are optional properties for "usb-c-connector".
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
@@ -119,30 +118,6 @@
 
   # The following are optional properties for "usb-c-connector" with power
   # delivery support.
-  source-pdos:
-    description: An array of u32 with each entry providing supported power
-      source data object(PDO), the detailed bit definitions of PDO can be found
-      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-      Source_Capabilities Message, the order of each entry(PDO) should follow
-      the PD spec chapter 6.4.1. Required for power source and power dual role.
-      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-      defined in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
-  sink-pdos:
-    description: An array of u32 with each entry providing supported power sink
-      data object(PDO), the detailed bit definitions of PDO can be found in
-      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-      Sink Capabilities Message, the order of each entry(PDO) should follow the
-      PD spec chapter 6.4.1. Required for power sink and power dual role. User
-      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-      in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
   sink-vdos:
     description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
       providing additional information corresponding to the product, the detailed bit
@@ -166,10 +141,43 @@
     maxItems: 6
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-  op-sink-microwatt:
-    description: Sink required operating power in microwatt, if source can't
-      offer the power, Capability Mismatch is set. Required for power sink and
-      power dual role.
+  accessory-mode-audio:
+    type: boolean
+    description: Whether the device supports Audio Adapter Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  accessory-mode-debug:
+    type: boolean
+    description: Whether the device supports Debug Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  altmodes:
+    type: object
+    description: List of Alternative Modes supported by the schematics on the
+      particular device. This is only necessary if there are no other means to
+      discover supported alternative modes (e.g. through the UCSI firmware
+      interface).
+
+    additionalProperties: false
+
+    patternProperties:
+      "^(displayport)$":
+        type: object
+        description:
+          A single USB-C Alternative Mode as supported by the USB-C connector logic.
+
+        additionalProperties: false
+
+        properties:
+          svid:
+            $ref: /schemas/types.yaml#/definitions/uint16
+            description: Unique value assigned by USB-IF to the Vendor / AltMode.
+            enum: [ 0xff01 ]
+          vdo:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: VDO returned by Discover Modes USB PD command.
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
@@ -231,6 +239,20 @@
       SNK_READY for non-pd link.
     type: boolean
 
+  capabilities:
+    description: A child node to contain all the selectable USB Power Delivery capabilities.
+    type: object
+
+    patternProperties:
+      "^caps-[0-9]+$":
+        description: Child nodes under "capabilities" node. Each node contains a selectable USB
+          Power Delivery capability.
+        type: object
+        $ref: "#/$defs/capabilities"
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 dependencies:
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
@@ -238,7 +260,42 @@
 required:
   - compatible
 
+$defs:
+  capabilities:
+    type: object
+
+    properties:
+      source-pdos:
+        description: An array of u32 with each entry providing supported power
+          source data object(PDO), the detailed bit definitions of PDO can be found
+          in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+          Source_Capabilities Message, the order of each entry(PDO) should follow
+          the PD spec chapter 6.4.1. Required for power source and power dual role.
+          User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+          defined in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      sink-pdos:
+        description: An array of u32 with each entry providing supported power sink
+          data object(PDO), the detailed bit definitions of PDO can be found in
+          "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+          Sink Capabilities Message, the order of each entry(PDO) should follow the
+          PD spec chapter 6.4.1. Required for power sink and power dual role. User
+          can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+          in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      op-sink-microwatt:
+        description: Sink required operating power in microwatt, if source can't
+          offer the power, Capability Mismatch is set. Required for power sink and
+          power dual role.
+
 allOf:
+  - $ref: "#/$defs/capabilities"
   - if:
       properties:
         compatible:
@@ -267,7 +324,7 @@
         - typec-power-opmode
         - new-source-frs-typec-current
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
@@ -289,6 +346,13 @@
             compatible = "usb-c-connector";
             label = "USB-C";
 
+            altmodes {
+                displayport {
+                    svid = /bits/ 16 <0xff01>;
+                    vdo = <0x00001c46>;
+                };
+            };
+
             ports {
                 #address-cells = <1>;
                 #size-cells = <0>;

diff --git a/Bindings/cpu/idle-states.yaml b/Bindings/cpu/idle-states.yaml
index b3a5356..239480e 100644
--- a/Bindings/cpu/idle-states.yaml
+++ b/Bindings/cpu/idle-states.yaml

@@ -243,7 +243,64 @@
   just supports idle_standby, an idle-states node is not required.
 
   ===========================================
-  6 - References
+  6 - Qualcomm specific STATES
+  ===========================================
+
+  Idle states have different enter/exit latency and residency values.
+  The idle states supported by the QCOM SoC are defined as -
+
+    * Standby
+    * Retention
+    * Standalone Power Collapse (Standalone PC or SPC)
+    * Power Collapse (PC)
+
+  Standby: Standby does a little more in addition to architectural clock gating.
+  When the WFI instruction is executed the ARM core would gate its internal
+  clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
+  trigger to execute the SPM state machine. The SPM state machine waits for the
+  interrupt to trigger the core back in to active. This triggers the cache
+  hierarchy to enter standby states, when all cpus are idle. An interrupt brings
+  the SPM state machine out of its wait, the next step is to ensure that the
+  cache hierarchy is also out of standby, and then the cpu is allowed to resume
+  execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
+  driver and is not defined in the DT. The SPM state machine should be
+  configured to execute this state by default and after executing every other
+  state below.
+
+  Retention: Retention is a low power state where the core is clock gated and
+  the memory and the registers associated with the core are retained. The
+  voltage may be reduced to the minimum value needed to keep the processor
+  registers active. The SPM should be configured to execute the retention
+  sequence and would wait for interrupt, before restoring the cpu to execution
+  state. Retention may have a slightly higher latency than Standby.
+
+  Standalone PC: A cpu can power down and warmboot if there is a sufficient time
+  between the time it enters idle and the next known wake up. SPC mode is used
+  to indicate a core entering a power down state without consulting any other
+  cpu or the system resources. This helps save power only on that core.  The SPM
+  sequence for this idle state is programmed to power down the supply to the
+  core, wait for the interrupt, restore power to the core, and ensure the
+  system state including cache hierarchy is ready before allowing core to
+  resume. Applying power and resetting the core causes the core to warmboot
+  back into Elevation Level (EL) which trampolines the control back to the
+  kernel. Entering a power down state for the cpu, needs to be done by trapping
+  into a EL. Failing to do so, would result in a crash enforced by the warm boot
+  code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
+  be flushed in s/w, before powering down the core.
+
+  Power Collapse: This state is similar to the SPC mode, but distinguishes
+  itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
+  modes. In a hierarchical power domain SoC, this means L2 and other caches can
+  be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
+  voltages reduced, provided all cpus enter this state.  Since the span of low
+  power modes possible at this state is vast, the exit latency and the residency
+  of this low power mode would be considered high even though at a cpu level,
+  this essentially is cpu power down. The SPM in this state also may handshake
+  with the Resource power manager (RPM) processor in the SoC to indicate a
+  complete application processor subsystem shut down.
+
+  ===========================================
+  7 - References
   ===========================================
 
   [1] ARM Linux Kernel documentation - CPUs bindings
@@ -301,9 +358,16 @@
 
     properties:
       compatible:
-        enum:
-          - arm,idle-state
-          - riscv,idle-state
+        oneOf:
+          - items:
+              - enum:
+                  - qcom,idle-state-ret
+                  - qcom,idle-state-spc
+                  - qcom,idle-state-pc
+              - const: arm,idle-state
+          - enum:
+              - arm,idle-state
+              - riscv,idle-state
 
       arm,psci-suspend-param:
         $ref: /schemas/types.yaml#/definitions/uint32
@@ -852,4 +916,13 @@
         };
     };
 
+    // Example 4 - Qualcomm SPC
+    idle-states {
+      cpu_spc: cpu-spc {
+        compatible = "qcom,idle-state-spc", "arm,idle-state";
+        entry-latency-us = <150>;
+        exit-latency-us = <200>;
+        min-residency-us = <2000>;
+      };
+    };
 ...

diff --git a/Bindings/crypto/inside-secure,safexcel.yaml b/Bindings/crypto/inside-secure,safexcel.yaml
new file mode 100644
index 0000000..ef07258
--- /dev/null
+++ b/Bindings/crypto/inside-secure,safexcel.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Inside Secure SafeXcel cryptographic engine
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: inside-secure,safexcel-eip197b
+      - const: inside-secure,safexcel-eip197d
+      - const: inside-secure,safexcel-eip97ies
+      - const: inside-secure,safexcel-eip197
+        description: Equivalent of inside-secure,safexcel-eip197b
+        deprecated: true
+      - const: inside-secure,safexcel-eip97
+        description: Equivalent of inside-secure,safexcel-eip97ies
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 6
+
+  interrupt-names:
+    items:
+      - const: ring0
+      - const: ring1
+      - const: ring2
+      - const: ring3
+      - const: eip
+      - const: mem
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - if:
+      properties:
+        clocks:
+          minItems: 2
+    then:
+      properties:
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    crypto@800000 {
+        compatible = "inside-secure,safexcel-eip197b";
+        reg = <0x800000 0x200000>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ring0", "ring1", "ring2", "ring3", "eip", "mem";
+        clocks = <&cpm_syscon0 1 26>;
+        clock-names = "core";
+    };

diff --git a/Bindings/crypto/inside-secure-safexcel.txt b/Bindings/crypto/inside-secure-safexcel.txt
deleted file mode 100644
index 3bbf144..0000000
--- a/Bindings/crypto/inside-secure-safexcel.txt
+++ /dev/null

@@ -1,40 +0,0 @@
-Inside Secure SafeXcel cryptographic engine
-
-Required properties:
-- compatible: Should be "inside-secure,safexcel-eip197b",
-	      "inside-secure,safexcel-eip197d" or
-              "inside-secure,safexcel-eip97ies".
-- reg: Base physical address of the engine and length of memory mapped region.
-- interrupts: Interrupt numbers for the rings and engine.
-- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem".
-
-Optional properties:
-- clocks: Reference to the crypto engine clocks, the second clock is
-          needed for the Armada 7K/8K SoCs.
-- clock-names: mandatory if there is a second clock, in this case the
-               name must be "core" for the first clock and "reg" for
-               the second one.
-
-Backward compatibility:
-Two compatibles are kept for backward compatibility, but shouldn't be used for
-new submissions:
-- "inside-secure,safexcel-eip197" is equivalent to
-  "inside-secure,safexcel-eip197b".
-- "inside-secure,safexcel-eip97" is equivalent to
-  "inside-secure,safexcel-eip97ies".
-
-Example:
-
-	crypto: crypto@800000 {
-		compatible = "inside-secure,safexcel-eip197b";
-		reg = <0x800000 0x200000>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
-				  "eip";
-		clocks = <&cpm_syscon0 1 26>;
-	};

diff --git a/Bindings/crypto/qcom,inline-crypto-engine.yaml b/Bindings/crypto/qcom,inline-crypto-engine.yaml
index ca4f7d1..09e4315 100644
--- a/Bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Bindings/crypto/qcom,inline-crypto-engine.yaml

@@ -16,6 +16,7 @@
           - qcom,sa8775p-inline-crypto-engine
           - qcom,sm8450-inline-crypto-engine
           - qcom,sm8550-inline-crypto-engine
+          - qcom,sm8650-inline-crypto-engine
       - const: qcom,inline-crypto-engine
 
   reg:

diff --git a/Bindings/crypto/qcom,prng.yaml b/Bindings/crypto/qcom,prng.yaml
index 13070db..89c8800 100644
--- a/Bindings/crypto/qcom,prng.yaml
+++ b/Bindings/crypto/qcom,prng.yaml

@@ -21,6 +21,7 @@
               - qcom,sc7280-trng
               - qcom,sm8450-trng
               - qcom,sm8550-trng
+              - qcom,sm8650-trng
           - const: qcom,trng
 
   reg:

diff --git a/Bindings/crypto/qcom-qce.yaml b/Bindings/crypto/qcom-qce.yaml
index 8e665d9..a48bd38 100644
--- a/Bindings/crypto/qcom-qce.yaml
+++ b/Bindings/crypto/qcom-qce.yaml

@@ -44,10 +44,12 @@
 
       - items:
           - enum:
+              - qcom,sc7280-qce
               - qcom,sm8250-qce
               - qcom,sm8350-qce
               - qcom,sm8450-qce
               - qcom,sm8550-qce
+              - qcom,sm8650-qce
           - const: qcom,sm8150-qce
           - const: qcom,qce
 
@@ -96,6 +98,7 @@
               - qcom,crypto-v5.4
               - qcom,ipq6018-qce
               - qcom,ipq8074-qce
+              - qcom,ipq9574-qce
               - qcom,msm8996-qce
               - qcom,sdm845-qce
     then:
@@ -129,6 +132,17 @@
         - clocks
         - clock-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-qce
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+
 required:
   - compatible
   - reg

diff --git a/Bindings/display/bridge/lontium,lt8912b.yaml b/Bindings/display/bridge/lontium,lt8912b.yaml
index f201ae4..2cef252 100644
--- a/Bindings/display/bridge/lontium,lt8912b.yaml
+++ b/Bindings/display/bridge/lontium,lt8912b.yaml

@@ -55,6 +55,27 @@
       - port@0
       - port@1
 
+  vcchdmipll-supply:
+    description: A 1.8V supply that powers the HDMI PLL.
+
+  vcchdmitx-supply:
+    description: A 1.8V supply that powers the HDMI TX part.
+
+  vcclvdspll-supply:
+    description: A 1.8V supply that powers the LVDS PLL.
+
+  vcclvdstx-supply:
+    description: A 1.8V supply that powers the LVDS TX part.
+
+  vccmipirx-supply:
+    description: A 1.8V supply that powers the MIPI RX part.
+
+  vccsysclk-supply:
+    description: A 1.8V supply that powers the SYSCLK.
+
+  vdd-supply:
+    description: A 1.8V supply that powers the digital part.
+
 required:
   - compatible
   - reg

diff --git a/Bindings/display/bridge/nxp,tda998x.yaml b/Bindings/display/bridge/nxp,tda998x.yaml
index 21d995f2..b8e9cf6 100644
--- a/Bindings/display/bridge/nxp,tda998x.yaml
+++ b/Bindings/display/bridge/nxp,tda998x.yaml

@@ -29,19 +29,22 @@
 
   audio-ports:
     description:
-      Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+      Array of 2 values per DAI (Documentation/sound/soc/dai.rst).
       The implementation allows one or two DAIs.
       If two DAIs are defined, they must be of different type.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 2
     items:
-      minItems: 1
       items:
         - description: |
             The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
             (see include/dt-bindings/display/tda998x.h).
+          enum: [ 1, 2 ]
         - description:
             The second value defines the tda998x AP_ENA reg content when the
             DAI in question is used.
+          maximum: 0xff
 
   '#sound-dai-cells':
     enum: [ 0, 1 ]

diff --git a/Bindings/display/mediatek/mediatek,aal.yaml b/Bindings/display/mediatek/mediatek,aal.yaml
index 7fd42c8..b4c28e9 100644
--- a/Bindings/display/mediatek/mediatek,aal.yaml
+++ b/Bindings/display/mediatek/mediatek,aal.yaml

@@ -24,6 +24,7 @@
       - enum:
           - mediatek,mt8173-disp-aal
           - mediatek,mt8183-disp-aal
+          - mediatek,mt8195-mdp3-aal
       - items:
           - enum:
               - mediatek,mt2712-disp-aal

diff --git a/Bindings/display/mediatek/mediatek,color.yaml b/Bindings/display/mediatek/mediatek,color.yaml
index f21e440..b886ca0 100644
--- a/Bindings/display/mediatek/mediatek,color.yaml
+++ b/Bindings/display/mediatek/mediatek,color.yaml

@@ -26,6 +26,7 @@
           - mediatek,mt2701-disp-color
           - mediatek,mt8167-disp-color
           - mediatek,mt8173-disp-color
+          - mediatek,mt8195-mdp3-color
       - items:
           - enum:
               - mediatek,mt7623-disp-color

diff --git a/Bindings/display/mediatek/mediatek,dsi.yaml b/Bindings/display/mediatek/mediatek,dsi.yaml
index ed24b61..8611319 100644
--- a/Bindings/display/mediatek/mediatek,dsi.yaml
+++ b/Bindings/display/mediatek/mediatek,dsi.yaml

@@ -34,6 +34,10 @@
           - enum:
               - mediatek,mt6795-dsi
           - const: mediatek,mt8173-dsi
+      - items:
+          - enum:
+              - mediatek,mt8195-dsi
+          - const: mediatek,mt8183-dsi
 
   reg:
     maxItems: 1

diff --git a/Bindings/display/mediatek/mediatek,ethdr.yaml b/Bindings/display/mediatek/mediatek,ethdr.yaml
index 801fa66..6778823 100644
--- a/Bindings/display/mediatek/mediatek,ethdr.yaml
+++ b/Bindings/display/mediatek/mediatek,ethdr.yaml

@@ -23,7 +23,11 @@
 
 properties:
   compatible:
-    const: mediatek,mt8195-disp-ethdr
+    oneOf:
+      - const: mediatek,mt8195-disp-ethdr
+      - items:
+          - const: mediatek,mt8188-disp-ethdr
+          - const: mediatek,mt8195-disp-ethdr
 
   reg:
     maxItems: 7

diff --git a/Bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Bindings/display/mediatek/mediatek,mdp-rdma.yaml
deleted file mode 100644
index dd12e2f..0000000
--- a/Bindings/display/mediatek/mediatek,mdp-rdma.yaml
+++ /dev/null

@@ -1,88 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek MDP RDMA
-
-maintainers:
-  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
-  - Philipp Zabel <p.zabel@pengutronix.de>
-
-description:
-  The MediaTek MDP RDMA stands for Read Direct Memory Access.
-  It provides real time data to the back-end panel driver, such as DSI,
-  DPI and DP_INTF.
-  It contains one line buffer to store the sufficient pixel data.
-  RDMA device node must be siblings to the central MMSYS_CONFIG node.
-  For a description of the MMSYS_CONFIG binding, see
-  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
-
-properties:
-  compatible:
-    const: mediatek,mt8195-vdo1-rdma
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: RDMA Clock
-
-  iommus:
-    maxItems: 1
-
-  mediatek,gce-client-reg:
-    description:
-      The register of display function block to be set by gce. There are 4 arguments,
-      such as gce node, subsys id, offset and register size. The subsys id that is
-      mapping to the register of display function blocks is defined in the gce header
-      include/dt-bindings/gce/<chip>-gce.h of each chips.
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      items:
-        - description: phandle of GCE
-        - description: GCE subsys id
-        - description: register offset
-        - description: register size
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - power-domains
-  - clocks
-  - iommus
-  - mediatek,gce-client-reg
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/mt8195-clk.h>
-    #include <dt-bindings/power/mt8195-power.h>
-    #include <dt-bindings/gce/mt8195-gce.h>
-    #include <dt-bindings/memory/mt8195-memory-port.h>
-
-    soc {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        rdma@1c104000 {
-            compatible = "mediatek,mt8195-vdo1-rdma";
-            reg = <0 0x1c104000 0 0x1000>;
-            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
-            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
-            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
-            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
-            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
-        };
-    };

diff --git a/Bindings/display/mediatek/mediatek,merge.yaml b/Bindings/display/mediatek/mediatek,merge.yaml
index eead5cb..dae8392 100644
--- a/Bindings/display/mediatek/mediatek,merge.yaml
+++ b/Bindings/display/mediatek/mediatek,merge.yaml

@@ -24,9 +24,13 @@
       - enum:
           - mediatek,mt8173-disp-merge
           - mediatek,mt8195-disp-merge
+          - mediatek,mt8195-mdp3-merge
       - items:
           - const: mediatek,mt6795-disp-merge
           - const: mediatek,mt8173-disp-merge
+      - items:
+          - const: mediatek,mt8188-disp-merge
+          - const: mediatek,mt8195-disp-merge
 
   reg:
     maxItems: 1

diff --git a/Bindings/display/mediatek/mediatek,ovl.yaml b/Bindings/display/mediatek/mediatek,ovl.yaml
index 3e1069b..c471a18 100644
--- a/Bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Bindings/display/mediatek/mediatek,ovl.yaml

@@ -26,6 +26,7 @@
           - mediatek,mt8173-disp-ovl
           - mediatek,mt8183-disp-ovl
           - mediatek,mt8192-disp-ovl
+          - mediatek,mt8195-mdp3-ovl
       - items:
           - enum:
               - mediatek,mt7623-disp-ovl

diff --git a/Bindings/display/mediatek/mediatek,padding.yaml b/Bindings/display/mediatek/mediatek,padding.yaml
new file mode 100644
index 0000000..be07bbd
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,padding.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Padding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  Padding provides ability to add pixels to width and height of a layer with
+  specified colors. Due to hardware design, Mixer in VDOSYS1 requires
+  width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
+  we need Padding to deal with odd width.
+  Please notice that even if the Padding is in bypass mode, settings in
+  register must be cleared to 0, or undefined behaviors could happen.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-disp-padding
+      - mediatek,mt8195-mdp3-padding
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Padding's clocks
+
+  mediatek,gce-client-reg:
+    description:
+      GCE (Global Command Engine) is a multi-core micro processor that helps
+      its clients to execute commands without interrupting CPU. This property
+      describes GCE client's information that is composed by 4 fields.
+      1. Phandle of the GCE (there may be several GCE processors)
+      2. Sub-system ID defined in the dt-binding like a user ID
+         (Please refer to include/dt-bindings/gce/<chip>-gce.h)
+      3. Offset from base address of the subsys you are at
+      4. Size of the register the client needs
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: Phandle of the GCE
+        - description: Subsys ID defined in the dt-binding
+        - description: Offset from base address of the subsys
+        - description: Size of register
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mediatek,mt8188-clk.h>
+    #include <dt-bindings/power/mediatek,mt8188-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        padding0: padding@1c11d000 {
+            compatible = "mediatek,mt8188-disp-padding";
+            reg = <0 0x1c11d000 0 0x1000>;
+            clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+            power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+        };
+    };

diff --git a/Bindings/display/mediatek/mediatek,split.yaml b/Bindings/display/mediatek/mediatek,split.yaml
index a8a5c96..e4affc8 100644
--- a/Bindings/display/mediatek/mediatek,split.yaml
+++ b/Bindings/display/mediatek/mediatek,split.yaml

@@ -23,6 +23,7 @@
     oneOf:
       - enum:
           - mediatek,mt8173-disp-split
+          - mediatek,mt8195-mdp3-split
       - items:
           - const: mediatek,mt6795-disp-split
           - const: mediatek,mt8173-disp-split
@@ -38,6 +39,21 @@
       the power controller specified by phandle. See
       Documentation/devicetree/bindings/power/power-domain.yaml for details.
 
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
   clocks:
     items:
       - description: SPLIT Clock
@@ -48,6 +64,17 @@
   - power-domains
   - clocks
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-mdp3-split
+
+    then:
+      required:
+        - mediatek,gce-client-reg
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/display/msm/dp-controller.yaml b/Bindings/display/msm/dp-controller.yaml
index dbe398f..ae53cbf 100644
--- a/Bindings/display/msm/dp-controller.yaml
+++ b/Bindings/display/msm/dp-controller.yaml

@@ -26,8 +26,10 @@
           - qcom,sc8280xp-edp
           - qcom,sdm845-dp
           - qcom,sm8350-dp
+          - qcom,sm8650-dp
       - items:
           - enum:
+              - qcom,sm8150-dp
               - qcom,sm8250-dp
               - qcom,sm8450-dp
               - qcom,sm8550-dp

diff --git a/Bindings/display/msm/dsi-controller-main.yaml b/Bindings/display/msm/dsi-controller-main.yaml
index c6dbab6..4219936 100644
--- a/Bindings/display/msm/dsi-controller-main.yaml
+++ b/Bindings/display/msm/dsi-controller-main.yaml

@@ -25,6 +25,7 @@
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
+              - qcom,sdm670-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
               - qcom,sm6125-dsi-ctrl
@@ -35,6 +36,7 @@
               - qcom,sm8350-dsi-ctrl
               - qcom,sm8450-dsi-ctrl
               - qcom,sm8550-dsi-ctrl
+              - qcom,sm8650-dsi-ctrl
           - const: qcom,mdss-dsi-ctrl
       - enum:
           - qcom,dsi-ctrl-6g-qcm2290
@@ -333,6 +335,7 @@
               - qcom,sm8350-dsi-ctrl
               - qcom,sm8450-dsi-ctrl
               - qcom,sm8550-dsi-ctrl
+              - qcom,sm8650-dsi-ctrl
     then:
       properties:
         clocks:

diff --git a/Bindings/display/msm/dsi-phy-7nm.yaml b/Bindings/display/msm/dsi-phy-7nm.yaml
index dd66195..7e764ea 100644
--- a/Bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Bindings/display/msm/dsi-phy-7nm.yaml

@@ -22,6 +22,7 @@
       - qcom,sm8350-dsi-phy-5nm
       - qcom,sm8450-dsi-phy-5nm
       - qcom,sm8550-dsi-phy-4nm
+      - qcom,sm8650-dsi-phy-4nm
 
   reg:
     items:

diff --git a/Bindings/display/msm/mdss-common.yaml b/Bindings/display/msm/mdss-common.yaml
index f69196e..c6305a6 100644
--- a/Bindings/display/msm/mdss-common.yaml
+++ b/Bindings/display/msm/mdss-common.yaml

@@ -61,17 +61,27 @@
 
   ranges: true
 
+  # This is not a perfect description, but it's impossible to discern and match
+  # the entries like we do with interconnect-names
   interconnects:
     minItems: 1
     items:
       - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
       - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    minItems: 1
-    items:
-      - const: mdp0-mem
-      - const: mdp1-mem
+    oneOf:
+      - minItems: 1
+        items:
+          - const: mdp0-mem
+          - const: cpu-cfg
+
+      - minItems: 2
+        items:
+          - const: mdp0-mem
+          - const: mdp1-mem
+          - const: cpu-cfg
 
   resets:
     items:

diff --git a/Bindings/display/msm/qcom,qcm2290-mdss.yaml b/Bindings/display/msm/qcom,qcm2290-mdss.yaml
index 5ad1556..f0cdb54 100644
--- a/Bindings/display/msm/qcom,qcm2290-mdss.yaml
+++ b/Bindings/display/msm/qcom,qcm2290-mdss.yaml

@@ -36,10 +36,14 @@
     maxItems: 2
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -56,7 +60,9 @@
 
     properties:
       compatible:
-        const: qcom,dsi-ctrl-6g-qcm2290
+        items:
+          - const: qcom,qcm2290-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
 
   "^phy@[0-9a-f]+$":
     type: object
@@ -96,8 +102,10 @@
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>,
+                        <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x420 0x2>,
                  <&apps_smmu 0x421 0x0>;
@@ -136,7 +144,8 @@
         };
 
         dsi@5e94000 {
-            compatible = "qcom,dsi-ctrl-6g-qcm2290";
+            compatible = "qcom,qcm2290-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
             reg = <0x05e94000 0x400>;
             reg-names = "dsi_ctrl";
 

diff --git a/Bindings/display/msm/qcom,sc7180-mdss.yaml b/Bindings/display/msm/qcom,sc7180-mdss.yaml
index 3432a24..7a0555b 100644
--- a/Bindings/display/msm/qcom,sc7180-mdss.yaml
+++ b/Bindings/display/msm/qcom,sc7180-mdss.yaml

@@ -36,10 +36,14 @@
     maxItems: 1
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -106,8 +110,10 @@
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x800 0x2>;
         ranges;

diff --git a/Bindings/display/msm/qcom,sc7280-mdss.yaml b/Bindings/display/msm/qcom,sc7280-mdss.yaml
index bbb7278..2947f27 100644
--- a/Bindings/display/msm/qcom,sc7280-mdss.yaml
+++ b/Bindings/display/msm/qcom,sc7280-mdss.yaml

@@ -36,10 +36,14 @@
     maxItems: 1
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -118,8 +122,10 @@
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x900 0x402>;
         ranges;

diff --git a/Bindings/display/msm/qcom,sdm670-mdss.yaml b/Bindings/display/msm/qcom,sdm670-mdss.yaml
new file mode 100644
index 0000000..7dc2693
--- /dev/null
+++ b/Bindings/display/msm/qcom,sdm670-mdss.yaml

@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Display MDSS
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description:
+  SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm670-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sdm670-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sdm670-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+                        <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm670-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM670_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...

diff --git a/Bindings/display/msm/qcom,sdm845-dpu.yaml b/Bindings/display/msm/qcom,sdm845-dpu.yaml
index b917064..dc11fd4 100644
--- a/Bindings/display/msm/qcom,sdm845-dpu.yaml
+++ b/Bindings/display/msm/qcom,sdm845-dpu.yaml

@@ -13,7 +13,9 @@
 
 properties:
   compatible:
-    const: qcom,sdm845-dpu
+    enum:
+      - qcom,sdm670-dpu
+      - qcom,sdm845-dpu
 
   reg:
     items:

diff --git a/Bindings/display/msm/qcom,sm6115-mdss.yaml b/Bindings/display/msm/qcom,sm6115-mdss.yaml
index dde5c2a..309de19 100644
--- a/Bindings/display/msm/qcom,sm6115-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm6115-mdss.yaml

@@ -29,6 +29,16 @@
   iommus:
     maxItems: 2
 
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object

diff --git a/Bindings/display/msm/qcom,sm6125-mdss.yaml b/Bindings/display/msm/qcom,sm6125-mdss.yaml
index 671c2c2..3deb9dc 100644
--- a/Bindings/display/msm/qcom,sm6125-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm6125-mdss.yaml

@@ -35,10 +35,14 @@
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":

diff --git a/Bindings/display/msm/qcom,sm6350-mdss.yaml b/Bindings/display/msm/qcom,sm6350-mdss.yaml
index e1dcb45..c9ba1fa 100644
--- a/Bindings/display/msm/qcom,sm6350-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm6350-mdss.yaml

@@ -35,10 +35,14 @@
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":

diff --git a/Bindings/display/msm/qcom,sm6375-mdss.yaml b/Bindings/display/msm/qcom,sm6375-mdss.yaml
index b15c395..8e8a288 100644
--- a/Bindings/display/msm/qcom,sm6375-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm6375-mdss.yaml

@@ -35,10 +35,14 @@
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":

diff --git a/Bindings/display/msm/qcom,sm8150-mdss.yaml b/Bindings/display/msm/qcom,sm8150-mdss.yaml
index a2a8be7..c0d6a4f 100644
--- a/Bindings/display/msm/qcom,sm8150-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8150-mdss.yaml

@@ -69,7 +69,7 @@
 
     properties:
       compatible:
-        const: qcom,dsi-phy-7nm
+        const: qcom,dsi-phy-7nm-8150
 
 unevaluatedProperties: false
 
@@ -247,7 +247,7 @@
         };
 
         dsi0_phy: phy@ae94400 {
-            compatible = "qcom,dsi-phy-7nm";
+            compatible = "qcom,dsi-phy-7nm-8150";
             reg = <0x0ae94400 0x200>,
                   <0x0ae94600 0x280>,
                   <0x0ae94900 0x260>;
@@ -318,7 +318,7 @@
         };
 
         dsi1_phy: phy@ae96400 {
-            compatible = "qcom,dsi-phy-7nm";
+            compatible = "qcom,dsi-phy-7nm-8150";
             reg = <0x0ae96400 0x200>,
                   <0x0ae96600 0x280>,
                   <0x0ae96900 0x260>;

diff --git a/Bindings/display/msm/qcom,sm8250-mdss.yaml b/Bindings/display/msm/qcom,sm8250-mdss.yaml
index 9949759..51368cd 100644
--- a/Bindings/display/msm/qcom,sm8250-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8250-mdss.yaml

@@ -52,6 +52,16 @@
       compatible:
         const: qcom,sm8250-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8250-dp
+          - const: qcom,sm8350-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true

diff --git a/Bindings/display/msm/qcom,sm8450-mdss.yaml b/Bindings/display/msm/qcom,sm8450-mdss.yaml
index 001b26e..747a2e9 100644
--- a/Bindings/display/msm/qcom,sm8450-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8450-mdss.yaml

@@ -30,10 +30,10 @@
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    maxItems: 3
 
   interconnect-names:
-    maxItems: 2
+    maxItems: 3
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -91,9 +91,12 @@
         reg = <0x0ae00000 0x1000>;
         reg-names = "mdss";
 
-        interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
-                        <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
-        interconnect-names = "mdp0-mem", "mdp1-mem";
+        interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
 
         resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
 

diff --git a/Bindings/display/msm/qcom,sm8650-dpu.yaml b/Bindings/display/msm/qcom,sm8650-dpu.yaml
new file mode 100644
index 0000000..a01d15a
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8650-dpu.yaml

@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display DPU
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8650-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi
+      - description: Display MDSS ahb
+      - description: Display lut
+      - description: Display core
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8650-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc_axi_clk>,
+                 <&dispcc_ahb_clk>,
+                 <&dispcc_mdp_lut_clk>,
+                 <&dispcc_mdp_clk>,
+                 <&dispcc_vsync_clk>;
+        clock-names = "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc_vsync_clk>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-325000000 {
+                opp-hz = /bits/ 64 <325000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-375000000 {
+                opp-hz = /bits/ 64 <375000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-514000000 {
+                opp-hz = /bits/ 64 <514000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...

diff --git a/Bindings/display/msm/qcom,sm8650-mdss.yaml b/Bindings/display/msm/qcom,sm8650-mdss.yaml
new file mode 100644
index 0000000..bd11119
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8650-mdss.yaml

@@ -0,0 +1,328 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display MDSS
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8650-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8650-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8650-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8650-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8650-dsi-phy-4nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8650-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&gcc_ahb_clk>,
+                 <&gcc_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8650-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8650-dsi-phy-4nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8650-dsi-phy-4nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+        };
+    };
+...

diff --git a/Bindings/display/panel/fascontek,fs035vg158.yaml b/Bindings/display/panel/fascontek,fs035vg158.yaml
new file mode 100644
index 0000000..d13c4bd
--- /dev/null
+++ b/Bindings/display/panel/fascontek,fs035vg158.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - John Watts <contact@jookia.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: fascontek,fs035vg158
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "fascontek,fs035vg158";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

diff --git a/Bindings/display/panel/himax,hx8394.yaml b/Bindings/display/panel/himax,hx8394.yaml
index ffb3528..916bb7f 100644
--- a/Bindings/display/panel/himax,hx8394.yaml
+++ b/Bindings/display/panel/himax,hx8394.yaml

@@ -23,6 +23,7 @@
     items:
       - enum:
           - hannstar,hsd060bhw4
+          - powkiddy,x55-panel
       - const: himax,hx8394
 
   reg: true
@@ -31,6 +32,8 @@
 
   backlight: true
 
+  rotation: true
+
   port: true
 
   vcc-supply:

diff --git a/Bindings/display/panel/ilitek,ili9805.yaml b/Bindings/display/panel/ilitek,ili9805.yaml
new file mode 100644
index 0000000..f4f91f9
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9805.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9805 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - giantplus,gpm1790a0
+          - tianma,tm041xdhg01
+      - const: ilitek,ili9805
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "giantplus,gpm1790a0", "ilitek,ili9805";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...

diff --git a/Bindings/display/panel/ilitek,ili9881c.yaml b/Bindings/display/panel/ilitek,ili9881c.yaml
index e7ab622..b1e624b 100644
--- a/Bindings/display/panel/ilitek,ili9881c.yaml
+++ b/Bindings/display/panel/ilitek,ili9881c.yaml

@@ -16,6 +16,7 @@
   compatible:
     items:
       - enum:
+          - ampire,am8001280g
           - bananapi,lhr050h41
           - feixin,k101-im2byl02
           - tdo,tl050hdv35

diff --git a/Bindings/display/panel/leadtek,ltk035c5444t.yaml b/Bindings/display/panel/leadtek,ltk035c5444t.yaml
index ebdca5f..7a55961 100644
--- a/Bindings/display/panel/leadtek,ltk035c5444t.yaml
+++ b/Bindings/display/panel/leadtek,ltk035c5444t.yaml

@@ -18,16 +18,12 @@
   compatible:
     const: leadtek,ltk035c5444t
 
-  backlight: true
-  port: true
-  power-supply: true
-  reg: true
-  reset-gpios: true
-
   spi-3wire: true
 
 required:
   - compatible
+  - reg
+  - port
   - power-supply
   - reset-gpios
 

diff --git a/Bindings/display/panel/newvision,nv3051d.yaml b/Bindings/display/panel/newvision,nv3051d.yaml
index cce775a..7a634fb 100644
--- a/Bindings/display/panel/newvision,nv3051d.yaml
+++ b/Bindings/display/panel/newvision,nv3051d.yaml

@@ -21,7 +21,7 @@
       - enum:
           - anbernic,rg351v-panel
           - anbernic,rg353p-panel
-          - anbernic,rg353v-panel
+          - powkiddy,rk2023-panel
       - const: newvision,nv3051d
 
   reg: true

diff --git a/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
index a5a596f..716ece5 100644
--- a/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
+++ b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml

@@ -33,6 +33,8 @@
 
         # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
       - auo,g133han01
+        # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel
+      - auo,g156han04
         # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
       - auo,g185han01
         # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel

diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
index 11422af..634a10c 100644
--- a/Bindings/display/panel/panel-simple.yaml
+++ b/Bindings/display/panel/panel-simple.yaml

@@ -73,6 +73,8 @@
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
+      - boe,bp101wx1-100
         # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
       - boe,ev121wxm-n10-1850
         # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
@@ -144,6 +146,8 @@
       - edt,etmv570g2dhu
         # E Ink VB3300-KCA
       - eink,vb3300-kca
+        # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel
+      - evervision,vgg644804
         # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
       - evervision,vgg804821
         # Foxlink Group 5" WVGA TFT LCD panel

diff --git a/Bindings/display/panel/sitronix,st7701.yaml b/Bindings/display/panel/sitronix,st7701.yaml
index 4dc0cd4..b348f5b 100644
--- a/Bindings/display/panel/sitronix,st7701.yaml
+++ b/Bindings/display/panel/sitronix,st7701.yaml

@@ -27,6 +27,7 @@
   compatible:
     items:
       - enum:
+          - anbernic,rg-arc-panel
           - densitron,dmt028vghmcmi-1a
           - elida,kd50t048a
           - techstar,ts8550b

diff --git a/Bindings/display/panel/synaptics,r63353.yaml b/Bindings/display/panel/synaptics,r63353.yaml
new file mode 100644
index 0000000..e5617d1
--- /dev/null
+++ b/Bindings/display/panel/synaptics,r63353.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics R63353 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls068b3sx02
+      - const: syna,r63353
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls068b3sx02", "syna,r63353";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...

diff --git a/Bindings/display/rockchip/inno_hdmi-rockchip.txt b/Bindings/display/rockchip/inno_hdmi-rockchip.txt
deleted file mode 100644
index cec2171..0000000
--- a/Bindings/display/rockchip/inno_hdmi-rockchip.txt
+++ /dev/null

@@ -1,49 +0,0 @@
-Rockchip specific extensions to the Innosilicon HDMI
-================================
-
-Required properties:
-- compatible:
-	"rockchip,rk3036-inno-hdmi";
-- reg:
-	Physical base address and length of the controller's registers.
-- clocks, clock-names:
-	Phandle to hdmi controller clock, name should be "pclk"
-- interrupts:
-	HDMI interrupt number
-- ports:
-	Contain one port node with endpoint definitions as defined in
-	Documentation/devicetree/bindings/graph.txt.
-- pinctrl-0, pinctrl-name:
-	Switch the iomux of HPD/CEC pins to HDMI function.
-
-Example:
-hdmi: hdmi@20034000 {
-	compatible = "rockchip,rk3036-inno-hdmi";
-	reg = <0x20034000 0x4000>;
-	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cru  PCLK_HDMI>;
-	clock-names = "pclk";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_ctl>;
-
-	hdmi_in: port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		hdmi_in_lcdc: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&lcdc_out_hdmi>;
-		};
-	};
-};
-
-&pinctrl {
-	hdmi {
-		hdmi_ctl: hdmi-ctl {
-			rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
-					<1 9  RK_FUNC_1 &pcfg_pull_none>,
-					<1 10 RK_FUNC_1 &pcfg_pull_none>,
-					<1 11 RK_FUNC_1 &pcfg_pull_none>;
-		};
-	};
-
-};

diff --git a/Bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Bindings/display/rockchip/rockchip,inno-hdmi.yaml
new file mode 100644
index 0000000..be78dcf
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip,inno-hdmi.yaml

@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Innosilicon HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-inno-hdmi
+      - rockchip,rk3128-inno-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The HDMI controller main clock
+      - description: The HDMI PHY reference clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a vop node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-inno-hdmi
+
+    then:
+      properties:
+        power-domains: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3128-inno-hdmi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3036-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    hdmi: hdmi@20034000 {
+      compatible = "rockchip,rk3036-inno-hdmi";
+      reg = <0x20034000 0x4000>;
+      interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru  PCLK_HDMI>;
+      clock-names = "pclk";
+      pinctrl-names = "default";
+      pinctrl-0 = <&hdmi_ctl>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi_in: port@0 {
+          reg = <0>;
+          hdmi_in_vop: endpoint {
+            remote-endpoint = <&vop_out_hdmi>;
+          };
+        };
+
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_ctl: hdmi-ctl {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+                          <1 RK_PB1 1 &pcfg_pull_none>,
+                          <1 RK_PB2 1 &pcfg_pull_none>,
+                          <1 RK_PB3 1 &pcfg_pull_none>;
+        };
+      };
+    };

diff --git a/Bindings/display/rockchip/rockchip-vop2.yaml b/Bindings/display/rockchip/rockchip-vop2.yaml
index b60b904..2531726 100644
--- a/Bindings/display/rockchip/rockchip-vop2.yaml
+++ b/Bindings/display/rockchip/rockchip-vop2.yaml

@@ -8,8 +8,8 @@
 
 description:
   VOP2 (Video Output Processor v2) is the display controller for the Rockchip
-  series of SoCs which transfers the image data from a video memory
-  buffer to an external LCD interface.
+  series of SoCs which transfers the image data from a video memory buffer to
+  an external LCD interface.
 
 maintainers:
   - Sandy Huang <hjc@rock-chips.com>
@@ -20,6 +20,7 @@
     enum:
       - rockchip,rk3566-vop
       - rockchip,rk3568-vop
+      - rockchip,rk3588-vop
 
   reg:
     items:
@@ -27,8 +28,8 @@
           Must contain one entry corresponding to the base address and length
           of the register space.
       - description:
-          Can optionally contain a second entry corresponding to
-          the CRTC gamma LUT address.
+          Can optionally contain a second entry corresponding to the CRTC gamma
+          LUT address.
 
   reg-names:
     items:
@@ -41,45 +42,63 @@
       The VOP interrupt is shared by several interrupt sources, such as
       frame start (VSYNC), line flag and other status interrupts.
 
+  # See compatible-specific constraints below.
   clocks:
+    minItems: 5
     items:
-      - description: Clock for ddr buffer transfer.
-      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Clock for ddr buffer transfer via axi.
+      - description: Clock for the ahb bus to R/W the regs.
       - description: Pixel clock for video port 0.
       - description: Pixel clock for video port 1.
       - description: Pixel clock for video port 2.
+      - description: Pixel clock for video port 3.
+      - description: Peripheral(vop grf/dsi) clock.
 
   clock-names:
+    minItems: 5
     items:
       - const: aclk
       - const: hclk
       - const: dclk_vp0
       - const: dclk_vp1
       - const: dclk_vp2
+      - const: dclk_vp3
+      - const: pclk_vop
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to GRF regs used for misc control
+      Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI,
+      also used for query vop memory bisr enable status, etc.
+
+  rockchip,vo1-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi
+      on rk3588.
+
+  rockchip,vop-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU GRF used for query vop memory bisr status on rk3588.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    properties:
-      port@0:
+    patternProperties:
+      "^port@[0-3]$":
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP0
+        description: Output endpoint of VP0/1/2/3.
 
-      port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP1
+    required:
+      - port@0
 
-      port@2:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output endpoint of VP2
+    unevaluatedProperties: false
 
   iommus:
     maxItems: 1
@@ -96,6 +115,49 @@
   - clock-names
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-vop
+    then:
+      properties:
+        clocks:
+          minItems: 7
+        clock-names:
+          minItems: 7
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+            - port@3
+
+      required:
+        - rockchip,grf
+        - rockchip,vo1-grf
+        - rockchip,vop-grf
+        - rockchip,pmu
+
+    else:
+      properties:
+        rockchip,vo1-grf: false
+        rockchip,vop-grf: false
+        rockchip,pmu: false
+
+        clocks:
+          maxItems: 5
+        clock-names:
+          maxItems: 5
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/display/samsung/samsung,exynos-mixer.yaml b/Bindings/display/samsung/samsung,exynos-mixer.yaml
index 25d53fd..597c9cc 100644
--- a/Bindings/display/samsung/samsung,exynos-mixer.yaml
+++ b/Bindings/display/samsung/samsung,exynos-mixer.yaml

@@ -85,7 +85,7 @@
         clocks:
           minItems: 6
           maxItems: 6
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -99,7 +99,7 @@
         clocks:
           minItems: 4
           maxItems: 4
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -116,7 +116,7 @@
         clocks:
           minItems: 3
           maxItems: 3
-        regs:
+        reg:
           minItems: 1
           maxItems: 1
 

diff --git a/Bindings/display/ti/ti,am65x-dss.yaml b/Bindings/display/ti/ti,am65x-dss.yaml
index ae09cd3..b6767ef 100644
--- a/Bindings/display/ti/ti,am65x-dss.yaml
+++ b/Bindings/display/ti/ti,am65x-dss.yaml

@@ -23,6 +23,7 @@
   compatible:
     enum:
       - ti,am625-dss
+      - ti,am62a7,dss
       - ti,am65x-dss
 
   reg:
@@ -87,6 +88,7 @@
           For AM65x DSS, the OLDI output port node from video port 1.
           For AM625 DSS, the internal DPI output port node from video
           port 1.
+          For AM62A7 DSS, the port is tied off inside the SoC.
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -108,6 +110,18 @@
       Input memory (from main memory to dispc) bandwidth limit in
       bytes per second
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62a7-dss
+    then:
+      properties:
+        ports:
+          properties:
+            port@0: false
+
 required:
   - compatible
   - reg

diff --git a/Bindings/dma/dma-controller.yaml b/Bindings/dma/dma-controller.yaml
index 04d150d..e6afca5 100644
--- a/Bindings/dma/dma-controller.yaml
+++ b/Bindings/dma/dma-controller.yaml

@@ -19,19 +19,4 @@
 
 additionalProperties: true
 
-examples:
-  - |
-    dma: dma-controller@48000000 {
-        compatible = "ti,omap-sdma";
-        reg = <0x48000000 0x1000>;
-        interrupts = <0 12 0x4>,
-                     <0 13 0x4>,
-                     <0 14 0x4>,
-                     <0 15 0x4>;
-        #dma-cells = <1>;
-        dma-channels = <32>;
-        dma-requests = <127>;
-        dma-channel-mask = <0xfffe>;
-    };
-
 ...

diff --git a/Bindings/dma/dma-router.yaml b/Bindings/dma/dma-router.yaml
index 346fe0f..5ad2feb 100644
--- a/Bindings/dma/dma-router.yaml
+++ b/Bindings/dma/dma-router.yaml

@@ -40,15 +40,4 @@
 
 additionalProperties: true
 
-examples:
-  - |
-    sdma_xbar: dma-router@4a002b78 {
-        compatible = "ti,dra7-dma-crossbar";
-        reg = <0x4a002b78 0xfc>;
-        #dma-cells = <1>;
-        dma-requests = <205>;
-        ti,dma-safe-map = <0>;
-        dma-masters = <&sdma>;
-    };
-
 ...

diff --git a/Bindings/dma/loongson,ls2x-apbdma.yaml b/Bindings/dma/loongson,ls2x-apbdma.yaml
new file mode 100644
index 0000000..6a1b49a
--- /dev/null
+++ b/Bindings/dma/loongson,ls2x-apbdma.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/loongson,ls2x-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X APB DMA controller
+
+description:
+  The Loongson LS2X APB DMA controller is used for transferring data
+  between system memory and the peripherals on the APB bus.
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls2k1000-apbdma
+      - items:
+          - const: loongson,ls2k0500-apbdma
+          - const: loongson,ls2k1000-apbdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    dma-controller@1fe00c00 {
+        compatible = "loongson,ls2k1000-apbdma";
+        reg = <0x1fe00c00 0x8>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk LOONGSON2_APB_CLK>;
+        #dma-cells = <1>;
+    };
+
+...

diff --git a/Bindings/dma/nvidia,tegra210-adma.yaml b/Bindings/dma/nvidia,tegra210-adma.yaml
index 4003dbe..877147e 100644
--- a/Bindings/dma/nvidia,tegra210-adma.yaml
+++ b/Bindings/dma/nvidia,tegra210-adma.yaml

@@ -53,6 +53,9 @@
       ADMA_CHn_CTRL register.
     const: 1
 
+  dma-channel-mask:
+    maxItems: 1
+
 required:
   - compatible
   - reg

diff --git a/Bindings/dma/qcom,gpi.yaml b/Bindings/dma/qcom,gpi.yaml
index 88d0de3..deb64cb 100644
--- a/Bindings/dma/qcom,gpi.yaml
+++ b/Bindings/dma/qcom,gpi.yaml

@@ -32,6 +32,8 @@
               - qcom,sm8350-gpi-dma
               - qcom,sm8450-gpi-dma
               - qcom,sm8550-gpi-dma
+              - qcom,sm8650-gpi-dma
+              - qcom,x1e80100-gpi-dma
           - const: qcom,sm6350-gpi-dma
       - items:
           - enum:

diff --git a/Bindings/dma/renesas,rz-dmac.yaml b/Bindings/dma/renesas,rz-dmac.yaml
index c284abc..a42b6a2 100644
--- a/Bindings/dma/renesas,rz-dmac.yaml
+++ b/Bindings/dma/renesas,rz-dmac.yaml

@@ -16,7 +16,7 @@
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-dmac # RZ/G2UL
+          - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-dmac # RZ/G2{L,LC}
           - renesas,r9a07g054-dmac # RZ/V2L
       - const: renesas,rz-dmac

diff --git a/Bindings/dma/sifive,fu540-c000-pdma.yaml b/Bindings/dma/sifive,fu540-c000-pdma.yaml
index a1af0b9..3b22183 100644
--- a/Bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Bindings/dma/sifive,fu540-c000-pdma.yaml

@@ -29,6 +29,7 @@
   compatible:
     items:
       - enum:
+          - microchip,mpfs-pdma
           - sifive,fu540-c000-pdma
       - const: sifive,pdma0
     description:

diff --git a/Bindings/dma/ti/k3-bcdma.yaml b/Bindings/dma/ti/k3-bcdma.yaml
index 4ca300a..27b8e16 100644
--- a/Bindings/dma/ti/k3-bcdma.yaml
+++ b/Bindings/dma/ti/k3-bcdma.yaml

@@ -37,11 +37,11 @@
 
   reg:
     minItems: 3
-    maxItems: 5
+    maxItems: 9
 
   reg-names:
     minItems: 3
-    maxItems: 5
+    maxItems: 9
 
   "#dma-cells":
     const: 3
@@ -141,7 +141,10 @@
         ti,sci-rm-range-tchan: false
 
         reg:
-          maxItems: 3
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: RX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
 
         reg-names:
           items:
@@ -161,14 +164,29 @@
       properties:
         reg:
           minItems: 5
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: Block Copy Channel Realtime Registers region
+            - description: RX Channel Realtime Registers region
+            - description: TX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
+            - description: Ring Configuration Registers region
+            - description: TX Channel Configuration Registers region
+            - description: RX Channel Configuration Registers region
+            - description: Block Copy Channel Configuration Registers region
 
         reg-names:
+          minItems: 5
           items:
             - const: gcfg
             - const: bchanrt
             - const: rchanrt
             - const: tchanrt
             - const: ringrt
+            - const: ring
+            - const: tchan
+            - const: rchan
+            - const: bchan
 
       required:
         - ti,sci-rm-range-bchan
@@ -184,7 +202,11 @@
         ti,sci-rm-range-bchan: false
 
         reg:
-          maxItems: 4
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: RX Channel Realtime Registers region
+            - description: TX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
 
         reg-names:
           items:
@@ -220,8 +242,13 @@
                       <0x0 0x4c000000 0x0 0x20000>,
                       <0x0 0x4a820000 0x0 0x20000>,
                       <0x0 0x4aa40000 0x0 0x20000>,
-                      <0x0 0x4bc00000 0x0 0x100000>;
-                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+                      <0x0 0x4bc00000 0x0 0x100000>,
+                      <0x0 0x48600000 0x0 0x8000>,
+                      <0x0 0x484a4000 0x0 0x2000>,
+                      <0x0 0x484c2000 0x0 0x2000>,
+                      <0x0 0x48420000 0x0 0x2000>;
+                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+                            "ring", "tchan", "rchan", "bchan";
                 msi-parent = <&inta_main_dmss>;
                 #dma-cells = <3>;
 

diff --git a/Bindings/dma/ti/k3-pktdma.yaml b/Bindings/dma/ti/k3-pktdma.yaml
index a69f62f..11e064c 100644
--- a/Bindings/dma/ti/k3-pktdma.yaml
+++ b/Bindings/dma/ti/k3-pktdma.yaml

@@ -45,14 +45,28 @@
       The second cell is the ASEL value for the channel
 
   reg:
-    maxItems: 4
+    minItems: 4
+    items:
+      - description: Packet DMA Control /Status Registers region
+      - description: RX Channel Realtime Registers region
+      - description: TX Channel Realtime Registers region
+      - description: Ring Realtime Registers region
+      - description: Ring Configuration Registers region
+      - description: TX Configuration Registers region
+      - description: RX Configuration Registers region
+      - description: RX Flow Configuration Registers region
 
   reg-names:
+    minItems: 4
     items:
       - const: gcfg
       - const: rchanrt
       - const: tchanrt
       - const: ringrt
+      - const: ring
+      - const: tchan
+      - const: rchan
+      - const: rflow
 
   msi-parent: true
 
@@ -136,8 +150,14 @@
                 reg = <0x0 0x485c0000 0x0 0x100>,
                       <0x0 0x4a800000 0x0 0x20000>,
                       <0x0 0x4aa00000 0x0 0x40000>,
-                      <0x0 0x4b800000 0x0 0x400000>;
-                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+                      <0x0 0x4b800000 0x0 0x400000>,
+                      <0x0 0x485e0000 0x0 0x20000>,
+                      <0x0 0x484a0000 0x0 0x4000>,
+                      <0x0 0x484c0000 0x0 0x2000>,
+                      <0x0 0x48430000 0x0 0x4000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+                            "ring", "tchan", "rchan", "rflow";
+
                 msi-parent = <&inta_main_dmss>;
                 #dma-cells = <2>;
 

diff --git a/Bindings/dma/ti/k3-udma.yaml b/Bindings/dma/ti/k3-udma.yaml
index 22f6c5e..b18cf2b 100644
--- a/Bindings/dma/ti/k3-udma.yaml
+++ b/Bindings/dma/ti/k3-udma.yaml

@@ -69,13 +69,24 @@
       - ti,j721e-navss-mcu-udmap
 
   reg:
-    maxItems: 3
+    minItems: 3
+    items:
+      - description: UDMA-P Control /Status Registers region
+      - description: RX Channel Realtime Registers region
+      - description: TX Channel Realtime Registers region
+      - description: TX Configuration Registers region
+      - description: RX Configuration Registers region
+      - description: RX Flow Configuration Registers region
 
   reg-names:
+    minItems: 3
     items:
       - const: gcfg
       - const: rchanrt
       - const: tchanrt
+      - const: tchan
+      - const: rchan
+      - const: rflow
 
   msi-parent: true
 
@@ -158,8 +169,11 @@
                 compatible = "ti,am654-navss-main-udmap";
                 reg = <0x0 0x31150000 0x0 0x100>,
                       <0x0 0x34000000 0x0 0x100000>,
-                      <0x0 0x35000000 0x0 0x100000>;
-                reg-names = "gcfg", "rchanrt", "tchanrt";
+                      <0x0 0x35000000 0x0 0x100000>,
+                      <0x0 0x30b00000 0x0 0x20000>,
+                      <0x0 0x30c00000 0x0 0x8000>,
+                      <0x0 0x30d00000 0x0 0x4000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "tchan", "rchan", "rflow";
                 #dma-cells = <1>;
 
                 ti,ringacc = <&ringacc>;

diff --git a/Bindings/dts-coding-style.rst b/Bindings/dts-coding-style.rst
new file mode 100644
index 0000000..a9bdd2b
--- /dev/null
+++ b/Bindings/dts-coding-style.rst

@@ -0,0 +1,196 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Devicetree Sources (DTS) Coding Style
+=====================================
+
+When writing Devicetree Sources (DTS) please observe below guidelines.  They
+should be considered complementary to any rules expressed already in
+the Devicetree Specification and the dtc compiler (including W=1 and W=2
+builds).
+
+Individual architectures and subarchitectures can define additional rules,
+making the coding style stricter.
+
+Naming and Valid Characters
+---------------------------
+
+The Devicetree Specification allows a broad range of characters in node
+and property names, but this coding style narrows the range down to achieve
+better code readability.
+
+1. Node and property names can use only the following characters:
+
+   * Lowercase characters: [a-z]
+   * Digits: [0-9]
+   * Dash: -
+
+2. Labels can use only the following characters:
+
+   * Lowercase characters: [a-z]
+   * Digits: [0-9]
+   * Underscore: _
+
+3. Unless a bus defines differently, unit addresses shall use lowercase
+   hexadecimal digits, without leading zeros (padding).
+
+4. Hex values in properties, e.g. "reg", shall use lowercase hex.  The address
+   part can be padded with leading zeros.
+
+Example::
+
+	gpi_dma2: dma-controller@a00000 {
+		compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+		reg = <0x0 0x00a00000 0x0 0x60000>;
+	}
+
+Order of Nodes
+--------------
+
+1. Nodes on any bus, thus using unit addresses for children, shall be
+   ordered by unit address in ascending order.
+   Alternatively for some subarchitectures, nodes of the same type can be
+   grouped together, e.g. all I2C controllers one after another even if this
+   breaks unit address ordering.
+
+2. Nodes without unit addresses shall be ordered alpha-numerically by the node
+   name.  For a few node types, they can be ordered by the main property, e.g.
+   pin configuration states ordered by value of "pins" property.
+
+3. When extending nodes in the board DTS via &label, the entries shall be
+   ordered either alpha-numerically or by keeping the order from DTSI, where
+   the choice depends on the subarchitecture.
+
+The above-described ordering rules are easy to enforce during review, reduce
+chances of conflicts for simultaneous additions of new nodes to a file and help
+in navigating through the DTS source.
+
+Example::
+
+	/* SoC DTSI */
+
+	/ {
+		cpus {
+			/* ... */
+		};
+
+		psci {
+			/* ... */
+		};
+
+		soc@0 {
+			dma: dma-controller@10000 {
+				/* ... */
+			};
+
+			clk: clock-controller@80000 {
+				/* ... */
+			};
+		};
+	};
+
+	/* Board DTS - alphabetical order */
+
+	&clk {
+		/* ... */
+	};
+
+	&dma {
+		/* ... */
+	};
+
+	/* Board DTS - alternative order, keep as DTSI */
+
+	&dma {
+		/* ... */
+	};
+
+	&clk {
+		/* ... */
+	};
+
+Order of Properties in Device Node
+----------------------------------
+
+The following order of properties in device nodes is preferred:
+
+1. "compatible"
+2. "reg"
+3. "ranges"
+4. Standard/common properties (defined by common bindings, e.g. without
+   vendor-prefixes)
+5. Vendor-specific properties
+6. "status" (if applicable)
+7. Child nodes, where each node is preceded with a blank line
+
+The "status" property is by default "okay", thus it can be omitted.
+
+The above-described ordering follows this approach:
+
+1. Most important properties start the node: compatible then bus addressing to
+   match unit address.
+2. Each node will have common properties in similar place.
+3. Status is the last information to annotate that device node is or is not
+   finished (board resources are needed).
+
+Example::
+
+	/* SoC DTSI */
+
+	device_node: device-class@6789abc {
+		compatible = "vendor,device";
+		reg = <0x0 0x06789abc 0x0 0xa123>;
+		ranges = <0x0 0x0 0x06789abc 0x1000>;
+		#dma-cells = <1>;
+		clocks = <&clock_controller 0>, <&clock_controller 1>;
+		clock-names = "bus", "host";
+		vendor,custom-property = <2>;
+		status = "disabled";
+
+		child_node: child-class@100 {
+			reg = <0x100 0x200>;
+			/* ... */
+		};
+	};
+
+	/* Board DTS */
+
+	&device_node {
+		vdd-supply = <&board_vreg1>;
+		status = "okay";
+	}
+
+Indentation
+-----------
+
+1. Use indentation according to Documentation/process/coding-style.rst.
+2. Each entry in arrays with multiple cells, e.g. "reg" with two IO addresses,
+   shall be enclosed in <>.
+3. For arrays spanning across lines, it is preferred to align the continued
+   entries with opening < from the first line.
+
+Example::
+
+	thermal-sensor@c271000 {
+		compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+		reg = <0x0 0x0c271000 0x0 0x1000>,
+		      <0x0 0x0c222000 0x0 0x1000>;
+	};
+
+Organizing DTSI and DTS
+-----------------------
+
+The DTSI and DTS files shall be organized in a way representing the common,
+reusable parts of hardware.  Typically, this means organizing DTSI and DTS files
+into several files:
+
+1. DTSI with contents of the entire SoC, without nodes for hardware not present
+   on the SoC.
+2. If applicable: DTSI with common or re-usable parts of the hardware, e.g.
+   entire System-on-Module.
+3. DTS representing the board.
+
+Hardware components that are present on the board shall be placed in the
+board DTS, not in the SoC or SoM DTSI.  A partial exception is a common
+external reference SoC input clock, which could be coded as a fixed-clock in
+the SoC DTSI with its frequency provided by each board DTS.

diff --git a/Bindings/eeprom/at24.yaml b/Bindings/eeprom/at24.yaml
index b6864d0..1812ef3 100644
--- a/Bindings/eeprom/at24.yaml
+++ b/Bindings/eeprom/at24.yaml

@@ -123,6 +123,7 @@
           - enum:
               - onnn,cat24c04
               - onnn,cat24c05
+              - rohm,br24g04
           - const: atmel,24c04
       - items:
           - const: renesas,r1ex24016

diff --git a/Bindings/firmware/qcom,scm.yaml b/Bindings/firmware/qcom,scm.yaml
index 0613a37..47d3d2d 100644
--- a/Bindings/firmware/qcom,scm.yaml
+++ b/Bindings/firmware/qcom,scm.yaml

@@ -63,7 +63,9 @@
           - qcom,scm-sm8350
           - qcom,scm-sm8450
           - qcom,scm-sm8550
+          - qcom,scm-sm8650
           - qcom,scm-qcs404
+          - qcom,scm-x1e80100
       - const: qcom,scm
 
   clocks:
@@ -178,21 +180,6 @@
           minItems: 3
           maxItems: 3
 
-  # Interconnects
-  - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - qcom,scm-qdu1000
-                - qcom,scm-sc8280xp
-                - qcom,scm-sm8450
-                - qcom,scm-sm8550
-    then:
-      properties:
-        interconnects: false
-
   # Interrupts
   - if:
       not:
@@ -202,6 +189,7 @@
               enum:
                 - qcom,scm-sm8450
                 - qcom,scm-sm8550
+                - qcom,scm-sm8650
     then:
       properties:
         interrupts: false

diff --git a/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 8228644..8e58485 100644
--- a/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml

@@ -95,8 +95,8 @@
       versal_clk: clock-controller {
         #clock-cells = <1>;
         compatible = "xlnx,versal-clk";
-        clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
-        clock-names = "ref", "alt_ref", "pl_alt_ref";
+        clocks = <&ref>, <&pl_alt_ref>;
+        clock-names = "ref", "pl_alt_ref";
       };
     };
 

diff --git a/Bindings/fpga/altera-fpga2sdram-bridge.txt b/Bindings/fpga/altera-fpga2sdram-bridge.txt
deleted file mode 100644
index 5dd0ff0..0000000
--- a/Bindings/fpga/altera-fpga2sdram-bridge.txt
+++ /dev/null

@@ -1,13 +0,0 @@
-Altera FPGA To SDRAM Bridge Driver
-
-Required properties:
-- compatible		: Should contain "altr,socfpga-fpga2sdram-bridge"
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	fpga_bridge3: fpga-bridge@ffc25080 {
-		compatible = "altr,socfpga-fpga2sdram-bridge";
-		reg = <0xffc25080 0x4>;
-		bridge-enable = <0>;
-	};

diff --git a/Bindings/fpga/altera-freeze-bridge.txt b/Bindings/fpga/altera-freeze-bridge.txt
deleted file mode 100644
index 8b26fbc..0000000
--- a/Bindings/fpga/altera-freeze-bridge.txt
+++ /dev/null

@@ -1,20 +0,0 @@
-Altera Freeze Bridge Controller Driver
-
-The Altera Freeze Bridge Controller manages one or more freeze bridges.
-The controller can freeze/disable the bridges which prevents signal
-changes from passing through the bridge.  The controller can also
-unfreeze/enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Required properties:
-- compatible		: Should contain "altr,freeze-bridge-controller"
-- regs			: base address and size for freeze bridge module
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	freeze-controller@100000450 {
-		compatible = "altr,freeze-bridge-controller";
-		regs = <0x1000 0x10>;
-		bridge-enable = <0>;
-	};

diff --git a/Bindings/fpga/altera-hps2fpga-bridge.txt b/Bindings/fpga/altera-hps2fpga-bridge.txt
deleted file mode 100644
index 68cce39..0000000
--- a/Bindings/fpga/altera-hps2fpga-bridge.txt
+++ /dev/null

@@ -1,36 +0,0 @@
-Altera FPGA/HPS Bridge Driver
-
-Required properties:
-- regs		: base address and size for AXI bridge module
-- compatible	: Should contain one of:
-		  "altr,socfpga-lwhps2fpga-bridge",
-		  "altr,socfpga-hps2fpga-bridge", or
-		  "altr,socfpga-fpga2hps-bridge"
-- resets	: Phandle and reset specifier for this bridge's reset
-- clocks	: Clocks used by this module.
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	fpga_bridge0: fpga-bridge@ff400000 {
-		compatible = "altr,socfpga-lwhps2fpga-bridge";
-		reg = <0xff400000 0x100000>;
-		resets = <&rst LWHPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-		bridge-enable = <0>;
-	};
-
-	fpga_bridge1: fpga-bridge@ff500000 {
-		compatible = "altr,socfpga-hps2fpga-bridge";
-		reg = <0xff500000 0x10000>;
-		resets = <&rst HPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-		bridge-enable = <1>;
-	};
-
-	fpga_bridge2: fpga-bridge@ff600000 {
-		compatible = "altr,socfpga-fpga2hps-bridge";
-		reg = <0xff600000 0x100000>;
-		resets = <&rst FPGA2HPS_RESET>;
-		clocks = <&l4_main_clk>;
-	};

diff --git a/Bindings/fpga/altr,freeze-bridge-controller.yaml b/Bindings/fpga/altr,freeze-bridge-controller.yaml
new file mode 100644
index 0000000..fccffee
--- /dev/null
+++ b/Bindings/fpga/altr,freeze-bridge-controller.yaml

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,freeze-bridge-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Freeze Bridge Controller
+
+description:
+  The Altera Freeze Bridge Controller manages one or more freeze bridges.
+  The controller can freeze/disable the bridges which prevents signal
+  changes from passing through the bridge. The controller can also
+  unfreeze/enable the bridges which allows traffic to pass through the bridge
+  normally.
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    const: altr,freeze-bridge-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fpga-bridge@100000450 {
+        compatible = "altr,freeze-bridge-controller";
+        reg = <0x1000 0x10>;
+        bridge-enable = <0>;
+    };

diff --git a/Bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml b/Bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml
new file mode 100644
index 0000000..22b5845
--- /dev/null
+++ b/Bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml

@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-fpga2sdram-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA To SDRAM Bridge
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    const: altr,socfpga-fpga2sdram-bridge
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fpga-bridge@ffc25080 {
+        compatible = "altr,socfpga-fpga2sdram-bridge";
+        reg = <0xffc25080 0x4>;
+        bridge-enable = <0>;
+    };

diff --git a/Bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml b/Bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml
new file mode 100644
index 0000000..d19c666
--- /dev/null
+++ b/Bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-hps2fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA/HPS Bridge
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    enum:
+      - altr,socfpga-lwhps2fpga-bridge
+      - altr,socfpga-hps2fpga-bridge
+      - altr,socfpga-fpga2hps-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/altr,rst-mgr.h>
+
+    fpga-bridge@ff400000 {
+      compatible = "altr,socfpga-lwhps2fpga-bridge";
+      reg = <0xff400000 0x100000>;
+      bridge-enable = <0>;
+      clocks = <&l4_main_clk>;
+      resets = <&rst LWHPS2FPGA_RESET>;
+    };

diff --git a/Bindings/fpga/fpga-bridge.txt b/Bindings/fpga/fpga-bridge.txt
deleted file mode 100644
index 72e0691..0000000
--- a/Bindings/fpga/fpga-bridge.txt
+++ /dev/null

@@ -1,13 +0,0 @@
-FPGA Bridge Device Tree Binding
-
-Optional properties:
-- bridge-enable		: 0 if driver should disable bridge at startup
-			  1 if driver should enable bridge at startup
-			  Default is to leave bridge in current state.
-
-Example:
-	fpga_bridge3: fpga-bridge@ffc25080 {
-		compatible = "altr,socfpga-fpga2sdram-bridge";
-		reg = <0xffc25080 0x4>;
-		bridge-enable = <0>;
-	};

diff --git a/Bindings/fpga/fpga-bridge.yaml b/Bindings/fpga/fpga-bridge.yaml
new file mode 100644
index 0000000..1ccb2aa
--- /dev/null
+++ b/Bindings/fpga/fpga-bridge.yaml

@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Bridge
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  $nodename:
+    pattern: "^fpga-bridge(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  bridge-enable:
+    description: |
+      0 if driver should disable bridge at startup
+      1 if driver should enable bridge at startup
+      Default is to leave bridge in current state.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+additionalProperties: true
+
+examples:
+  - |
+    fpga-bridge {
+        bridge-enable = <0>;
+    };

diff --git a/Bindings/fpga/xlnx,pr-decoupler.yaml b/Bindings/fpga/xlnx,pr-decoupler.yaml
index a7d4b8e..5bf731f 100644
--- a/Bindings/fpga/xlnx,pr-decoupler.yaml
+++ b/Bindings/fpga/xlnx,pr-decoupler.yaml

@@ -9,6 +9,9 @@
 maintainers:
   - Nava kishore Manne <nava.kishore.manne@amd.com>
 
+allOf:
+  - $ref: fpga-bridge.yaml#
+
 description: |
   The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more
   decouplers/fpga bridges. The controller can decouple/disable the bridges
@@ -51,7 +54,7 @@
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/gnss/u-blox,neo-6m.yaml b/Bindings/gnss/u-blox,neo-6m.yaml
index 4835a28..cd80668 100644
--- a/Bindings/gnss/u-blox,neo-6m.yaml
+++ b/Bindings/gnss/u-blox,neo-6m.yaml

@@ -28,6 +28,9 @@
       port or the USB host-controller port to which this device is attached,
       depending on the bus used. Required for the DDC, SPI or USB busses.
 
+  reset-gpios:
+    maxItems: 1
+
   vcc-supply:
     description: >
       Main voltage regulator
@@ -49,10 +52,13 @@
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     serial {
         gnss {
             compatible = "u-blox,neo-8";
             v-bckp-supply = <&gnss_v_bckp_reg>;
             vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
         };
     };

diff --git a/Bindings/gpio/brcm,brcmstb-gpio.yaml b/Bindings/gpio/brcm,brcmstb-gpio.yaml
index 4a896ff..a1e71c9 100644
--- a/Bindings/gpio/brcm,brcmstb-gpio.yaml
+++ b/Bindings/gpio/brcm,brcmstb-gpio.yaml

@@ -72,7 +72,7 @@
   - reg
   - gpio-controller
   - "#gpio-cells"
-  - "brcm,gpio-bank-widths"
+  - brcm,gpio-bank-widths
 
 additionalProperties: false
 

diff --git a/Bindings/gpio/nuvoton,sgpio.yaml b/Bindings/gpio/nuvoton,sgpio.yaml
new file mode 100644
index 0000000..9e32e54
--- /dev/null
+++ b/Bindings/gpio/nuvoton,sgpio.yaml

@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton SGPIO controller
+
+maintainers:
+  - Jim LIU <JJLIU0@nuvoton.com>
+
+description: |
+  This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC and detailed
+  information is in the NPCM7XX/8XX SERIAL I/O EXPANSION INTERFACE section.
+  Nuvoton NPCM7xx SGPIO module is combines a serial to parallel IC (HC595)
+  and a parallel to serial IC (HC165).
+  Clock is a division of the APB3 clock.
+  This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
+  NPCM7xx/NPCM8xx have two sgpio modules. Each module can support up
+  to 64 output pins, and up to 64 input pins, the pin is only for GPI or GPO.
+  GPIO pins can be programmed to support the following options
+  - Support interrupt option for each input port and various interrupt
+    sensitivity options (level-high, level-low, edge-high, edge-low)
+  - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
+    nuvoton,input-ngpios GPIO lines is only for GPI.
+    nuvoton,output-ngpios GPIO lines is only for GPO.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-sgpio
+      - nuvoton,npcm845-sgpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,input-ngpios:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The numbers of GPIO's exposed. GPIO lines are only for GPI.
+    minimum: 0
+    maximum: 64
+
+  nuvoton,output-ngpios:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The numbers of GPIO's exposed. GPIO lines are only for GPO.
+    minimum: 0
+    maximum: 64
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - nuvoton,input-ngpios
+  - nuvoton,output-ngpios
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio8: gpio@101000 {
+        compatible = "nuvoton,npcm750-sgpio";
+        reg = <0x101000 0x200>;
+        clocks = <&clk NPCM7XX_CLK_APB3>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        nuvoton,input-ngpios = <64>;
+        nuvoton,output-ngpios = <64>;
+    };

diff --git a/Bindings/gpio/realtek,rtd-gpio.yaml b/Bindings/gpio/realtek,rtd-gpio.yaml
new file mode 100644
index 0000000..dd768db
--- /dev/null
+++ b/Bindings/gpio/realtek,rtd-gpio.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,rtd-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC GPIO controller
+
+maintainers:
+  - Tzuyi Chang <tychang@realtek.com>
+
+description:
+  The GPIO controller is designed for the Realtek DHC (Digital Home Center)
+  RTD series SoC family, which are high-definition media processor SoCs.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-misc-gpio
+      - realtek,rtd1295-iso-gpio
+      - realtek,rtd1315e-iso-gpio
+      - realtek,rtd1319-iso-gpio
+      - realtek,rtd1319d-iso-gpio
+      - realtek,rtd1395-iso-gpio
+      - realtek,rtd1619-iso-gpio
+      - realtek,rtd1619b-iso-gpio
+
+  reg:
+    items:
+      - description: GPIO controller registers
+      - description: GPIO interrupt registers
+
+  interrupts:
+    items:
+      - description: Interrupt number of the assert GPIO interrupt, which is
+                     triggered when there is a rising edge.
+      - description: Interrupt number of the deassert GPIO interrupt, which is
+                     triggered when there is a falling edge.
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-ranges
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@100 {
+      compatible = "realtek,rtd1319d-iso-gpio";
+      reg = <0x100 0x100>,
+            <0x0 0xb0>;
+      interrupt-parent = <&iso_irq_mux>;
+      interrupts = <19>, <20>;
+      gpio-ranges = <&pinctrl 0 0 82>;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };

diff --git a/Bindings/gpio/rockchip,gpio-bank.yaml b/Bindings/gpio/rockchip,gpio-bank.yaml
index affd823..d76987c 100644
--- a/Bindings/gpio/rockchip,gpio-bank.yaml
+++ b/Bindings/gpio/rockchip,gpio-bank.yaml

@@ -41,6 +41,13 @@
   "#interrupt-cells":
     const: 2
 
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
 required:
   - compatible
   - reg

diff --git a/Bindings/gpio/snps,dw-apb-gpio.yaml b/Bindings/gpio/snps,dw-apb-gpio.yaml
index eefe7b3..ab2afc0 100644
--- a/Bindings/gpio/snps,dw-apb-gpio.yaml
+++ b/Bindings/gpio/snps,dw-apb-gpio.yaml

@@ -65,6 +65,8 @@
         minItems: 1
         maxItems: 32
 
+      gpio-ranges: true
+
       ngpios:
         default: 32
         minimum: 1

diff --git a/Bindings/gpio/xlnx,gpio-xilinx.yaml b/Bindings/gpio/xlnx,gpio-xilinx.yaml
index c1060e5..d3d8a2e 100644
--- a/Bindings/gpio/xlnx,gpio-xilinx.yaml
+++ b/Bindings/gpio/xlnx,gpio-xilinx.yaml

@@ -126,7 +126,7 @@
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        gpio@e000a000 {
+        gpio@a0020000 {
             compatible = "xlnx,xps-gpio-1.00.a";
             reg = <0xa0020000 0x10000>;
             #gpio-cells = <2>;

diff --git a/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
index 56143f1..bb93baa 100644
--- a/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
+++ b/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml

@@ -12,7 +12,8 @@
   PS_MODE). Every pin can be configured as input/output.
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:
@@ -23,6 +24,8 @@
   "#gpio-cells":
     const: 2
 
+  label: true
+
 required:
   - compatible
   - gpio-controller
@@ -37,6 +40,7 @@
             compatible = "xlnx,zynqmp-gpio-modepin";
             gpio-controller;
             #gpio-cells = <2>;
+            label = "modepin";
         };
     };
 

diff --git a/Bindings/gpu/arm,mali-midgard.yaml b/Bindings/gpu/arm,mali-midgard.yaml
index ca02bab..0801da3 100644
--- a/Bindings/gpu/arm,mali-midgard.yaml
+++ b/Bindings/gpu/arm,mali-midgard.yaml

@@ -42,6 +42,11 @@
           - const: arm,mali-t760
       - items:
           - enum:
+              - samsung,exynos7-mali
+          - const: samsung,exynos5433-mali
+          - const: arm,mali-t760
+      - items:
+          - enum:
               - rockchip,rk3399-mali
           - const: arm,mali-t860
 

diff --git a/Bindings/gpu/arm,mali-utgard.yaml b/Bindings/gpu/arm,mali-utgard.yaml
index 0fae1ef..abd4aa3 100644
--- a/Bindings/gpu/arm,mali-utgard.yaml
+++ b/Bindings/gpu/arm,mali-utgard.yaml

@@ -29,6 +29,7 @@
               - allwinner,sun50i-a64-mali
               - rockchip,rk3036-mali
               - rockchip,rk3066-mali
+              - rockchip,rk3128-mali
               - rockchip,rk3188-mali
               - rockchip,rk3228-mali
               - samsung,exynos4210-mali

diff --git a/Bindings/gpu/brcm,bcm-v3d.yaml b/Bindings/gpu/brcm,bcm-v3d.yaml
index dae55b8..dc078ce 100644
--- a/Bindings/gpu/brcm,bcm-v3d.yaml
+++ b/Bindings/gpu/brcm,bcm-v3d.yaml

@@ -17,6 +17,7 @@
   compatible:
     enum:
       - brcm,2711-v3d
+      - brcm,2712-v3d
       - brcm,7268-v3d
       - brcm,7278-v3d
 

diff --git a/Bindings/gpu/img,powervr.yaml b/Bindings/gpu/img,powervr.yaml
new file mode 100644
index 0000000..a13298f
--- /dev/null
+++ b/Bindings/gpu/img,powervr.yaml

@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR and IMG GPU
+
+maintainers:
+  - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am62-gpu
+      - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: mem
+      - const: sys
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62-gpu
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    gpu@fd00000 {
+        compatible = "ti,am62-gpu", "img,img-axe";
+        reg = <0x0fd00000 0x20000>;
+        clocks = <&k3_clks 187 0>;
+        clock-names = "core";
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+    };

diff --git a/Bindings/gpu/samsung-g2d.yaml b/Bindings/gpu/samsung-g2d.yaml
index e7daae8..132aaa4 100644
--- a/Bindings/gpu/samsung-g2d.yaml
+++ b/Bindings/gpu/samsung-g2d.yaml

@@ -22,36 +22,20 @@
   interrupts:
     maxItems: 1
 
-  clocks: {}
-  clock-names: {}
-  iommus: {}
-  power-domains: {}
+  clocks:
+    minItems: 1
+    maxItems: 2
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: samsung,exynos5250-g2d
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
-then:
-  properties:
-    clocks:
-      items:
-        - description: fimg2d clock
-    clock-names:
-      items:
-        - const: fimg2d
+  iommus:
+    minItems: 1
+    maxItems: 2
 
-else:
-  properties:
-    clocks:
-      items:
-        - description: sclk_fimg2d clock
-        - description: fimg2d clock
-    clock-names:
-      items:
-        - const: sclk_fimg2d
-        - const: fimg2d
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -60,6 +44,33 @@
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-g2d
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: fimg2d clock
+        clock-names:
+          items:
+            - const: fimg2d
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: sclk_fimg2d clock
+            - description: fimg2d clock
+        clock-names:
+          items:
+            - const: sclk_fimg2d
+            - const: fimg2d
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/gpu/samsung-rotator.yaml b/Bindings/gpu/samsung-rotator.yaml
index d60626ff..18bf44e 100644
--- a/Bindings/gpu/samsung-rotator.yaml
+++ b/Bindings/gpu/samsung-rotator.yaml

@@ -12,10 +12,11 @@
 properties:
   compatible:
     enum:
-      - "samsung,s5pv210-rotator"
-      - "samsung,exynos4210-rotator"
-      - "samsung,exynos4212-rotator"
-      - "samsung,exynos5250-rotator"
+      - samsung,s5pv210-rotator
+      - samsung,exynos4210-rotator
+      - samsung,exynos4212-rotator
+      - samsung,exynos5250-rotator
+
   reg:
     maxItems: 1
 

diff --git a/Bindings/gpu/samsung-scaler.yaml b/Bindings/gpu/samsung-scaler.yaml
index 5317ac6..9fb530e 100644
--- a/Bindings/gpu/samsung-scaler.yaml
+++ b/Bindings/gpu/samsung-scaler.yaml

@@ -21,40 +21,20 @@
   interrupts:
     maxItems: 1
 
-  clocks: {}
-  clock-names: {}
-  iommus: {}
-  power-domains: {}
+  clocks:
+    minItems: 1
+    maxItems: 3
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: samsung,exynos5420-scaler
+  clock-names:
+    minItems: 1
+    maxItems: 3
 
-then:
-  properties:
-    clocks:
-      items:
-        - description: mscl clock
+  iommus:
+    minItems: 1
+    maxItems: 2
 
-    clock-names:
-      items:
-        - const: mscl
-
-else:
-  properties:
-    clocks:
-      items:
-        - description: pclk clock
-        - description: aclk clock
-        - description: aclk_xiu clock
-
-    clock-names:
-      items:
-        - const: pclk
-        - const: aclk
-        - const: aclk_xiu
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -63,6 +43,39 @@
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-scaler
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: mscl clock
+        clock-names:
+          items:
+            - const: mscl
+        iommus:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: pclk clock
+            - description: aclk clock
+            - description: aclk_xiu clock
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+        iommus:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/hwinfo/samsung,exynos-chipid.yaml b/Bindings/hwinfo/samsung,exynos-chipid.yaml
index 95cbdcb..780ccb5 100644
--- a/Bindings/hwinfo/samsung,exynos-chipid.yaml
+++ b/Bindings/hwinfo/samsung,exynos-chipid.yaml

@@ -11,9 +11,21 @@
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos4210-chipid
-      - samsung,exynos850-chipid
+    oneOf:
+      - enum:
+          - samsung,exynos4210-chipid
+          - samsung,exynos850-chipid
+      - items:
+          - enum:
+              - samsung,exynos5433-chipid
+              - samsung,exynos7-chipid
+          - const: samsung,exynos4210-chipid
+      - items:
+          - enum:
+              - samsung,exynos7885-chipid
+              - samsung,exynosautov9-chipid
+              - samsung,exynosautov920-chipid
+          - const: samsung,exynos850-chipid
 
   reg:
     maxItems: 1

diff --git a/Bindings/hwmon/gpio-fan.txt b/Bindings/hwmon/gpio-fan.txt
deleted file mode 100644
index f4cfa35..0000000
--- a/Bindings/hwmon/gpio-fan.txt
+++ /dev/null

@@ -1,41 +0,0 @@
-Bindings for fan connected to GPIO lines
-
-Required properties:
-- compatible : "gpio-fan"
-
-Optional properties:
-- gpios: Specifies the pins that map to bits in the control value,
-  ordered MSB-->LSB.
-- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
-  control value that should be set to achieve them. This array
-  must have the RPM values in ascending order.
-- alarm-gpios: This pin going active indicates something is wrong with
-  the fan, and a udev event will be fired.
-- #cooling-cells: If used as a cooling device, must be <2>
-  Also see:
-  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
-  min and max states are derived from the speed-map of the fan.
-
-Note: At least one the "gpios" or "alarm-gpios" properties must be set.
-
-Examples:
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio1 14 1
-			 &gpio1 13 1>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
-		alarm-gpios = <&gpio1 15 1>;
-	};
-	gpio_fan_cool: gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio2 14 1
-			 &gpio2 13 1>;
-		gpio-fan,speed-map =	<0    0>,
-					<3000 1>,
-					<6000 2>;
-		alarm-gpios = <&gpio2 15 1>;
-		#cooling-cells = <2>; /* min followed by max */
-	};

diff --git a/Bindings/hwmon/gpio-fan.yaml b/Bindings/hwmon/gpio-fan.yaml
new file mode 100644
index 0000000..7f30cfc
--- /dev/null
+++ b/Bindings/hwmon/gpio-fan.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to GPIO lines
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: gpio-fan
+
+  gpios:
+    description: |
+      Specifies the pins that map to bits in the control value,
+      ordered MSB-->LSB.
+    minItems: 1
+    maxItems: 7
+
+  alarm-gpios:
+    maxItems: 1
+
+  gpio-fan,speed-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 2
+    maxItems: 127
+    items:
+      items:
+        - description: fan speed in RPMs
+        - description: control value
+    description: |
+      A mapping of possible fan RPM speeds and the
+      control value that should be set to achieve them. This array
+      must have the RPM values in ascending order.
+
+  '#cooling-cells':
+    const: 2
+
+required:
+  - compatible
+  - gpios
+  - gpio-fan,speed-map
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-fan {
+      compatible = "gpio-fan";
+      gpios = <&gpio2 14 1
+               &gpio2 13 1>;
+      gpio-fan,speed-map = <   0 0>,
+                           <3000 1>,
+                           <6000 2>;
+      alarm-gpios = <&gpio2 15 1>;
+      #cooling-cells = <2>; /* min followed by max */
+    };

diff --git a/Bindings/hwmon/iio-hwmon.yaml b/Bindings/hwmon/iio-hwmon.yaml
index e5b2478..be5c7d4 100644
--- a/Bindings/hwmon/iio-hwmon.yaml
+++ b/Bindings/hwmon/iio-hwmon.yaml

@@ -19,7 +19,7 @@
 
   io-channels:
     minItems: 1
-    maxItems: 8 # Should be enough
+    maxItems: 51 # Should be enough
     description: >
       List of phandles to ADC channels to read the monitoring values
 

diff --git a/Bindings/hwmon/lltc,ltc4286.yaml b/Bindings/hwmon/lltc,ltc4286.yaml
new file mode 100644
index 0000000..98ca163
--- /dev/null
+++ b/Bindings/hwmon/lltc,ltc4286.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4286 power monitors
+
+maintainers:
+  - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4286
+      - lltc,ltc4287
+
+  reg:
+    maxItems: 1
+
+  adi,vrange-low-enable:
+    description:
+      This property is a bool parameter to represent the
+      voltage range is 25.6 volts or 102.4 volts for this chip.
+      The default is 102.4 volts.
+    type: boolean
+
+  shunt-resistor-micro-ohms:
+    description:
+      Resistor value micro-ohms.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@40 {
+            compatible = "lltc,ltc4286";
+            reg = <0x40>;
+            adi,vrange-low-enable;
+            shunt-resistor-micro-ohms = <300>;
+        };
+    };

diff --git a/Bindings/hwmon/lm75.yaml b/Bindings/hwmon/lm75.yaml
index 0b69897..ed269e4 100644
--- a/Bindings/hwmon/lm75.yaml
+++ b/Bindings/hwmon/lm75.yaml

@@ -14,6 +14,7 @@
   compatible:
     enum:
       - adi,adt75
+      - ams,as6200
       - atmel,at30ts74
       - dallas,ds1775
       - dallas,ds75
@@ -48,10 +49,28 @@
   vs-supply:
     description: phandle to the regulator that provides the +VS supply
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ams,as6200
+                - ti,tmp100
+                - ti,tmp101
+                - ti,tmp112
+    then:
+      properties:
+        interrupts: false
+
 additionalProperties: false
 
 examples:
@@ -66,3 +85,17 @@
         vs-supply = <&vs>;
       };
     };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      temperature-sensor@48 {
+        compatible = "ams,as6200";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+      };
+    };

diff --git a/Bindings/i2c/i2c-exynos5.yaml b/Bindings/i2c/i2c-exynos5.yaml
index 3e52a0d..df9c57b 100644
--- a/Bindings/i2c/i2c-exynos5.yaml
+++ b/Bindings/i2c/i2c-exynos5.yaml

@@ -25,7 +25,16 @@
           - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
           - samsung,exynos5260-hsi2c    # Exynos5260
           - samsung,exynos7-hsi2c       # Exynos7
-          - samsung,exynosautov9-hsi2c  # ExynosAutoV9 and Exynos850
+          - samsung,exynosautov9-hsi2c
+      - items:
+          - enum:
+              - samsung,exynos5433-hsi2c
+              - tesla,fsd-hsi2c
+          - const: samsung,exynos7-hsi2c
+      - items:
+          - enum:
+              - samsung,exynos850-hsi2c
+          - const: samsung,exynosautov9-hsi2c
       - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
         deprecated: true
 

diff --git a/Bindings/i2c/samsung,s3c2410-i2c.yaml b/Bindings/i2c/samsung,s3c2410-i2c.yaml
index b204e35..1303502 100644
--- a/Bindings/i2c/samsung,s3c2410-i2c.yaml
+++ b/Bindings/i2c/samsung,s3c2410-i2c.yaml

@@ -11,14 +11,20 @@
 
 properties:
   compatible:
-    enum:
-      - samsung,s3c2410-i2c
-      - samsung,s3c2440-i2c
-        # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
-      - samsung,s3c2440-hdmiphy-i2c
-        # For s3c2440-like I2C used as a host to SATA PHY controller on an
-        # internal bus:
-      - samsung,exynos5-sata-phy-i2c
+    oneOf:
+      - enum:
+          - samsung,s3c2410-i2c
+          - samsung,s3c2440-i2c
+            # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+          - samsung,s3c2440-hdmiphy-i2c
+            # For s3c2440-like I2C used as a host to SATA PHY controller on an
+            # internal bus:
+          - samsung,exynos5-sata-phy-i2c
+      - items:
+          - enum:
+              - samsung,exynos7885-i2c
+              - samsung,exynos850-i2c
+          - const: samsung,s3c2440-i2c
 
   '#address-cells':
     const: 1

diff --git a/Bindings/i2c/st,stm32-i2c.yaml b/Bindings/i2c/st,stm32-i2c.yaml
index 94b75d9..1b31b87 100644
--- a/Bindings/i2c/st,stm32-i2c.yaml
+++ b/Bindings/i2c/st,stm32-i2c.yaml

@@ -19,6 +19,7 @@
               - st,stm32f7-i2c
               - st,stm32mp13-i2c
               - st,stm32mp15-i2c
+              - st,stm32mp25-i2c
     then:
       properties:
         i2c-scl-rising-time-ns:
@@ -41,6 +42,30 @@
         clock-frequency:
           enum: [100000, 400000]
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32f4-i2c
+              - st,stm32f7-i2c
+              - st,stm32mp13-i2c
+              - st,stm32mp15-i2c
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+
+        interrupt-names:
+          minItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        interrupt-names:
+          maxItems: 1
+
 properties:
   compatible:
     enum:
@@ -48,6 +73,7 @@
       - st,stm32f7-i2c
       - st,stm32mp13-i2c
       - st,stm32mp15-i2c
+      - st,stm32mp25-i2c
 
   reg:
     maxItems: 1
@@ -56,11 +82,13 @@
     items:
       - description: interrupt ID for I2C event
       - description: interrupt ID for I2C error
+    minItems: 1
 
   interrupt-names:
     items:
       - const: event
       - const: error
+    minItems: 1
 
   resets:
     maxItems: 1

diff --git a/Bindings/iio/adc/adi,ad7091r5.yaml b/Bindings/iio/adc/adi,ad7091r5.yaml
index ce7ba63..ddec974 100644
--- a/Bindings/iio/adc/adi,ad7091r5.yaml
+++ b/Bindings/iio/adc/adi,ad7091r5.yaml

@@ -4,36 +4,92 @@
 $id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+title: Analog Devices AD7091R-2/-4/-5/-8 Multi-Channel 12-Bit ADCs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
 
 description: |
-  Analog Devices AD7091R5 4-Channel 12-Bit ADC
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC supporting I2C interface
   https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+  Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 2-/4-/8-Channel 12-Bit ADCs
+  supporting SPI interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf
 
 properties:
   compatible:
     enum:
+      - adi,ad7091r2
+      - adi,ad7091r4
       - adi,ad7091r5
+      - adi,ad7091r8
 
   reg:
     maxItems: 1
 
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (VDD range is from 2.7V to 5.25V).
+
+  vdrive-supply:
+    description:
+      Determines the voltage level at which the interface logic will operate.
+      The V_drive voltage range is from 1.8V to 5.25V and must not exceed VDD by
+      more than 0.3V.
+
   vref-supply:
     description:
       Phandle to the vref power supply
 
-  interrupts:
+  convst-gpios:
+    description:
+      GPIO connected to the CONVST pin.
+      This logic input is used to initiate conversions on the analog
+      input channels.
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for signaling when conversion results exceed the high limit for
+      ADC readings or fall below the low limit for them. Interrupt source must
+      be attached to ALERT/BUSY/GPO0 pin.
+    maxItems: 1
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # AD7091R-2 does not have ALERT/BUSY/GPO pin
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+    then:
+      properties:
+        interrupts: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+              - adi,ad7091r4
+              - adi,ad7091r8
+    then:
+      required:
+        - convst-gpios
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -51,4 +107,22 @@
             interrupt-parent = <&gpio>;
         };
     };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7091r8";
+            reg = <0x0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&adc_vref>;
+            convst-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
 ...

diff --git a/Bindings/iio/adc/adi,ad7780.yaml b/Bindings/iio/adc/adi,ad7780.yaml
index 5fcc8dd..be2616f 100644
--- a/Bindings/iio/adc/adi,ad7780.yaml
+++ b/Bindings/iio/adc/adi,ad7780.yaml

@@ -80,9 +80,9 @@
             compatible = "adi,ad7780";
             reg = <0>;
 
-            avdd-supply      = <&vdd_supply>;
-            powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-            adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&vdd_supply>;
+            powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+            adi,gain-gpios = <&gpio1  5 GPIO_ACTIVE_LOW>;
             adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
         };
     };

diff --git a/Bindings/iio/adc/maxim,max34408.yaml b/Bindings/iio/adc/maxim,max34408.yaml
new file mode 100644
index 0000000..4cba856
--- /dev/null
+++ b/Bindings/iio/adc/maxim,max34408.yaml

@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX34408/MAX34409 current monitors with overcurrent control
+
+maintainers:
+  - Ivan Mikhaylov <fr0st61te@gmail.com>
+
+description: |
+  The MAX34408/MAX34409 are two- and four-channel current monitors that are
+  configured and monitored with a standard I2C/SMBus serial interface. Each
+  unidirectional current sensor offers precision high-side operation with a
+  low full-scale sense voltage. The devices automatically sequence through
+  two or four channels and collect the current-sense samples and average them
+  to reduce the effect of impulse noise. The raw ADC samples are compared to
+  user-programmable digital thresholds to indicate overcurrent conditions.
+  Overcurrent conditions trigger a hardware output to provide an immediate
+  indication to shut down any necessary external circuitry.
+
+  Specifications about the devices can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max34408
+      - maxim,max34409
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      Shutdown Output. Open-drain output. This output transitions to high impedance
+      when any of the digital comparator thresholds are exceeded as long as the ENA
+      pin is high.
+    maxItems: 1
+
+  powerdown-status-gpios:
+    description:
+      SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and
+      unconditionally deassert (force low) the SHTDN output and reset the shutdown
+      delay. Connect to VDD to enable normal latch operation of the SHTDN output.
+    maxItems: 1
+
+  vdd-supply: true
+
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          - minimum: 0
+            maximum: 3
+
+      maxim,rsense-val-micro-ohms:
+        description:
+          Adjust the Rsense value to monitor higher or lower current levels for
+          input.
+        enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+        default: 1000
+
+    required:
+      - reg
+      - maxim,rsense-val-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max34408
+    then:
+      patternProperties:
+        "^channel@[2-3]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-3]$":
+          properties:
+            reg:
+              maximum: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1e {
+              compatible = "maxim,max34409";
+              reg = <0x1e>;
+              powerdown-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+              powerdown-status-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              channel@0 {
+                  reg = <0x0>;
+                  maxim,rsense-val-micro-ohms = <5000>;
+              };
+
+              channel@1 {
+                  reg = <0x1>;
+                  maxim,rsense-val-micro-ohms = <10000>;
+             };
+        };
+    };

diff --git a/Bindings/iio/adc/qcom,spmi-iadc.yaml b/Bindings/iio/adc/qcom,spmi-iadc.yaml
index 73def67..5ed893e 100644
--- a/Bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Bindings/iio/adc/qcom,spmi-iadc.yaml

@@ -25,7 +25,7 @@
       - const: qcom,spmi-iadc
 
   reg:
-    description: IADC base address and length in the SPMI PMIC register map
+    description: IADC base address in the SPMI PMIC register map
     maxItems: 1
 
   qcom,external-resistor-micro-ohms:
@@ -50,15 +50,17 @@
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        pmic_iadc: adc@3600 {
+
+        adc@3600 {
             compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
             reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
-            #io-channel-cells  = <1>;
+            #io-channel-cells = <1>;
         };
     };
 ...

diff --git a/Bindings/iio/adc/qcom,spmi-rradc.yaml b/Bindings/iio/adc/qcom,spmi-rradc.yaml
index b3a6263..f39bc92 100644
--- a/Bindings/iio/adc/qcom,spmi-rradc.yaml
+++ b/Bindings/iio/adc/qcom,spmi-rradc.yaml

@@ -43,9 +43,9 @@
         #address-cells = <1>;
         #size-cells = <0>;
 
-        pmic_rradc: adc@4500 {
+        adc@4500 {
             compatible = "qcom,pmi8998-rradc";
             reg = <0x4500>;
-            #io-channel-cells  = <1>;
+            #io-channel-cells = <1>;
         };
     };

diff --git a/Bindings/iio/adc/qcom,spmi-vadc.yaml b/Bindings/iio/adc/qcom,spmi-vadc.yaml
index ad7d6fc..40fa071 100644
--- a/Bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Bindings/iio/adc/qcom,spmi-vadc.yaml

@@ -236,11 +236,11 @@
 
 examples:
   - |
-    spmi {
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        /* VADC node */
-        pmic_vadc: adc@3100 {
+
+        adc@3100 {
             compatible = "qcom,spmi-vadc";
             reg = <0x3100>;
             interrupts = <0x0 0x31 0x0 0x1>;
@@ -281,9 +281,10 @@
     #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    spmi {
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         adc@3100 {
             reg = <0x3100>;
             compatible = "qcom,spmi-adc7";

diff --git a/Bindings/iio/adc/samsung,exynos-adc.yaml b/Bindings/iio/adc/samsung,exynos-adc.yaml
index 582d0a0..4e40f6b 100644
--- a/Bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Bindings/iio/adc/samsung,exynos-adc.yaml

@@ -11,18 +11,23 @@
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos-adc-v1                 # Exynos5250
-      - samsung,exynos-adc-v2
-      - samsung,exynos3250-adc
-      - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
-      - samsung,exynos7-adc
-      - samsung,s3c2410-adc
-      - samsung,s3c2416-adc
-      - samsung,s3c2440-adc
-      - samsung,s3c2443-adc
-      - samsung,s3c6410-adc
-      - samsung,s5pv210-adc
+    oneOf:
+      - enum:
+          - samsung,exynos-adc-v1                 # Exynos5250
+          - samsung,exynos-adc-v2
+          - samsung,exynos3250-adc
+          - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
+          - samsung,exynos7-adc
+          - samsung,s3c2410-adc
+          - samsung,s3c2416-adc
+          - samsung,s3c2440-adc
+          - samsung,s3c2443-adc
+          - samsung,s3c6410-adc
+          - samsung,s5pv210-adc
+      - items:
+          - enum:
+              - samsung,exynos5433-adc
+          - const: samsung,exynos7-adc
 
   reg:
     maxItems: 1

diff --git a/Bindings/iio/adc/ti,palmas-gpadc.yaml b/Bindings/iio/adc/ti,palmas-gpadc.yaml
index 720c16a..f94057d 100644
--- a/Bindings/iio/adc/ti,palmas-gpadc.yaml
+++ b/Bindings/iio/adc/ti,palmas-gpadc.yaml

@@ -67,19 +67,4 @@
   - compatible
   - "#io-channel-cells"
 
-examples:
-  - |
-    #include <dt-bindings/clock/mt8183-clk.h>
-    pmic {
-        compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
-        adc {
-            compatible = "ti,palmas-gpadc";
-            interrupts = <18 0>,
-                         <16 0>,
-                         <17 0>;
-            #io-channel-cells = <1>;
-            ti,channel0-current-microamp = <5>;
-            ti,channel3-current-microamp = <10>;
-        };
-    };
 ...

diff --git a/Bindings/iio/amplifiers/adi,hmc425a.yaml b/Bindings/iio/amplifiers/adi,hmc425a.yaml
index 2ee6080..67de9d4 100644
--- a/Bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Bindings/iio/amplifiers/adi,hmc425a.yaml

@@ -12,6 +12,9 @@
 description: |
   Digital Step Attenuator IIO devices with gpio interface.
   Offer various frequency and attenuation ranges.
+  ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf
+
   HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
 
@@ -22,6 +25,7 @@
 properties:
   compatible:
     enum:
+      - adi,adrf5740
       - adi,hmc425a
       - adi,hmc540s
 

diff --git a/Bindings/iio/chemical/aosong,ags02ma.yaml b/Bindings/iio/chemical/aosong,ags02ma.yaml
new file mode 100644
index 0000000..35e7b09
--- /dev/null
+++ b/Bindings/iio/chemical/aosong,ags02ma.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/aosong,ags02ma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aosong AGS02MA VOC Sensor
+
+description: |
+  AGS02MA is an TVOC (Total Volatile Organic Compounds) i2c sensor with default
+  address of 0x1a.
+
+  Datasheet:
+    https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - aosong,ags02ma
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        voc-sensor@1a {
+            compatible = "aosong,ags02ma";
+            reg = <0x1a>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };

diff --git a/Bindings/iio/dac/adi,ad5791.yaml b/Bindings/iio/dac/adi,ad5791.yaml
index 3a84739..c81285d 100644
--- a/Bindings/iio/dac/adi,ad5791.yaml
+++ b/Bindings/iio/dac/adi,ad5791.yaml

@@ -26,6 +26,11 @@
   vdd-supply: true
   vss-supply: true
 
+  adi,rbuf-gain2-en:
+    description: Specify to allow an external amplifier to be connected in a
+      gain of two configuration.
+    type: boolean
+
 required:
   - compatible
   - reg

diff --git a/Bindings/iio/dac/microchip,mcp4821.yaml b/Bindings/iio/dac/microchip,mcp4821.yaml
new file mode 100644
index 0000000..0dc577c
--- /dev/null
+++ b/Bindings/iio/dac/microchip,mcp4821.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4821 and similar DACs
+
+description: |
+  Supports MCP48x1 (single channel) and MCP48x2 (dual channel) series of DACs.
+  Device supports simplex communication over SPI in Mode 0 and Mode 3.
+
+  +---------+--------------+-------------+
+  | Device  |  Resolution  |   Channels  |
+  |---------|--------------|-------------|
+  | MCP4801 |     8-bit    |      1      |
+  | MCP4802 |     8-bit    |      2      |
+  | MCP4811 |    10-bit    |      1      |
+  | MCP4812 |    10-bit    |      2      |
+  | MCP4821 |    12-bit    |      1      |
+  | MCP4822 |    12-bit    |      2      |
+  +---------+--------------+-------------+
+
+  Datasheet:
+    MCP48x1: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf
+    MCP48x2: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4801
+      - microchip,mcp4802
+      - microchip,mcp4811
+      - microchip,mcp4812
+      - microchip,mcp4821
+      - microchip,mcp4822
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  ldac-gpios:
+    description: |
+      Active Low LDAC (Latch DAC Input) pin used to update the DAC output.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: |
+      Active Low SHDN pin used to enter the shutdown mode.
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "microchip,mcp4821";
+            reg = <0>;
+            vdd-supply = <&vdd_regulator>;
+            ldac-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+            powerdown-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+            spi-cpha;
+            spi-cpol;
+        };
+    };

diff --git a/Bindings/iio/humidity/ti,hdc3020.yaml b/Bindings/iio/humidity/ti,hdc3020.yaml
new file mode 100644
index 0000000..7f6d0f9
--- /dev/null
+++ b/Bindings/iio/humidity/ti,hdc3020.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors
+
+maintainers:
+  - Li peiyu <579lpy@gmail.com>
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description:
+  https://www.ti.com/lit/ds/symlink/hdc3020.pdf
+
+  The HDC302x is an integrated capacitive based relative humidity (RH)
+  and temperature sensor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,hdc3021
+              - ti,hdc3022
+          - const: ti,hdc3020
+      - const: ti,hdc3020
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity-sensor@47 {
+            compatible = "ti,hdc3021", "ti,hdc3020";
+            reg = <0x47>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };

diff --git a/Bindings/iio/imu/adi,adis16460.yaml b/Bindings/iio/imu/adi,adis16460.yaml
index 4e43c80..4cacc99 100644
--- a/Bindings/iio/imu/adi,adis16460.yaml
+++ b/Bindings/iio/imu/adi,adis16460.yaml

@@ -25,6 +25,10 @@
 
   spi-cpol: true
 
+  spi-cs-inactive-delay-ns:
+    minimum: 16000
+    default: 16000
+
   interrupts:
     maxItems: 1
 

diff --git a/Bindings/iio/imu/adi,adis16475.yaml b/Bindings/iio/imu/adi,adis16475.yaml
index c73533c..9b7ad60 100644
--- a/Bindings/iio/imu/adi,adis16475.yaml
+++ b/Bindings/iio/imu/adi,adis16475.yaml

@@ -47,6 +47,10 @@
   spi-max-frequency:
     maximum: 2000000
 
+  spi-cs-inactive-delay-ns:
+    minimum: 16000
+    default: 16000
+
   interrupts:
     maxItems: 1
 

diff --git a/Bindings/iio/imu/bosch,bmi323.yaml b/Bindings/iio/imu/bosch,bmi323.yaml
new file mode 100644
index 0000000..64ef26e
--- /dev/null
+++ b/Bindings/iio/imu/bosch,bmi323.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi323.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI323 6-Axis IMU
+
+maintainers:
+  - Jagath Jog J <jagathjog1996@gmail.com>
+
+description:
+  BMI323 is a 6-axis inertial measurement unit that supports acceleration and
+  gyroscopic measurements with hardware fifo buffering. Sensor also provides
+  events information such as motion, steps, orientation, single and double
+  tap detection.
+
+properties:
+  compatible:
+    const: bosch,bmi323
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    description:
+      set if the specified interrupt pin should be configured as
+      open drain. If not set, defaults to push-pull.
+
+  mount-matrix:
+    description:
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "bosch,bmi323";
+            reg = <0x68>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };

diff --git a/Bindings/iio/light/liteon,ltr390.yaml b/Bindings/iio/light/liteon,ltr390.yaml
new file mode 100644
index 0000000..5d98ef2
--- /dev/null
+++ b/Bindings/iio/light/liteon,ltr390.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltr390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lite-On LTR390 ALS and UV Sensor
+
+description: |
+  The Lite-On LTR390 is an ALS (Ambient Light Sensor) and a UV sensor in a
+  single package with i2c address of 0x53.
+
+  Datasheet:
+    https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - liteon,ltr390
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Level interrupt pin with open drain output.
+      The sensor pulls this pin low when the measured reading is greater than
+      some configured threshold.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltr390";
+            reg = <0x53>;
+            interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };

diff --git a/Bindings/iio/light/vishay,veml6075.yaml b/Bindings/iio/light/vishay,veml6075.yaml
new file mode 100644
index 0000000..abee04c
--- /dev/null
+++ b/Bindings/iio/light/vishay,veml6075.yaml

@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vishay VEML6075 UVA and UVB sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: vishay,veml6075
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        uv-sensor@10 {
+            compatible = "vishay,veml6075";
+            reg = <0x10>;
+            vdd-supply = <&vdd_reg>;
+        };
+    };
+...

diff --git a/Bindings/iio/pressure/honeywell,hsc030pa.yaml b/Bindings/iio/pressure/honeywell,hsc030pa.yaml
new file mode 100644
index 0000000..65a24ed
--- /dev/null
+++ b/Bindings/iio/pressure/honeywell,hsc030pa.yaml

@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell TruStability HSC and SSC pressure sensor series
+
+description: |
+  support for Honeywell TruStability HSC and SSC digital pressure sensor
+  series.
+
+  These sensors have either an I2C, an SPI or an analog interface. Only the
+  digital versions are supported by this driver.
+
+  There are 118 models with different pressure ranges available in each family.
+  The vendor calls them "HSC series" and "SSC series". All of them have an
+  identical programming model but differ in pressure range, unit and transfer
+  function.
+
+  To support different models one needs to specify the pressure range as well
+  as the transfer function. Pressure range can either be provided via
+  pressure-triplet (directly extracted from the part number) or in case it's
+  a custom chip via numerical range limits converted to pascals.
+
+  The transfer function defines the ranges of raw conversion values delivered
+  by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and
+  maximum pressure that can be measured.
+
+  Please note that in case of an SPI-based sensor, the clock signal should not
+  exceed 800kHz and the MOSI signal is not required.
+
+  Specifications about the devices can be found at:
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf
+
+maintainers:
+  - Petre Rodan <petre.rodan@subdimension.ro>
+
+properties:
+  compatible:
+    const: honeywell,hsc030pa
+
+  reg:
+    maxItems: 1
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by
+      the sensor.
+      0 - A, 10% to 90% of 2^14
+      1 - B, 5% to 95% of 2^14
+      2 - C, 5% to 85% of 2^14
+      3 - F, 4% to 94% of 2^14
+    enum: [0, 1, 2, 3]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
+    enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,
+           006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,
+           400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,
+           010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,
+           600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,
+           250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,
+           1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,
+           100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,
+           2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,
+           160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,
+           150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,
+           001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,
+           010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,
+           150PG, NA]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description: |
+      Minimum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+
+  honeywell,pmax-pascal:
+    description: |
+      Maximum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (either 3.3V or 5V depending on the chip)
+
+  spi-max-frequency:
+    maximum: 800000
+
+required:
+  - compatible
+  - reg
+  - honeywell,transfer-function
+  - honeywell,pressure-triplet
+
+additionalProperties: false
+
+dependentSchemas:
+  honeywell,pmin-pascal:
+    properties:
+      honeywell,pressure-triplet:
+        const: NA
+  honeywell,pmax-pascal:
+    properties:
+      honeywell,pressure-triplet:
+        const: NA
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@28 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0x28>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "030PA";
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "NA";
+            honeywell,pmin-pascal = <0>;
+            honeywell,pmax-pascal = <200000>;
+        };
+    };
+...

diff --git a/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
index b31f812..d9e903f 100644
--- a/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ b/Bindings/iio/pressure/honeywell,mprls0025pa.yaml

@@ -53,12 +53,10 @@
   honeywell,pmin-pascal:
     description:
       Minimum pressure value the sensor can measure in pascal.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   honeywell,pmax-pascal:
     description:
       Maximum pressure value the sensor can measure in pascal.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   honeywell,transfer-function:
     description: |

diff --git a/Bindings/iio/temperature/melexis,mlx90632.yaml b/Bindings/iio/temperature/melexis,mlx90632.yaml
index 4a55e7f..03bb5d4 100644
--- a/Bindings/iio/temperature/melexis,mlx90632.yaml
+++ b/Bindings/iio/temperature/melexis,mlx90632.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melexis MLX90632 contactless Infra Red temperature sensor
+title: Melexis MLX90632 and MLX90635 contactless Infra Red temperature sensor
 
 maintainers:
   - Crt Mori <cmo@melexis.com>
@@ -27,9 +27,24 @@
   Since measured object emissivity effects Infra Red energy emitted,
   emissivity should be set before requesting the object temperature.
 
+  https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90635
+
+  MLX90635 is most suitable for consumer applications where
+  measured object temperature is in range between -20 to 100 degrees
+  Celsius with relative error of measurement 2 degree Celsius in
+  object temperature range for industrial applications, while just 0.2
+  degree Celsius for human body measurement applications. Since it can
+  operate and measure ambient temperature in range of -20 to 85 degrees
+  Celsius it is suitable also for outdoor use.
+
+  Since measured object emissivity effects Infra Red energy emitted,
+  emissivity should be set before requesting the object temperature.
+
 properties:
   compatible:
-    const: melexis,mlx90632
+    enum:
+      - melexis,mlx90632
+      - melexis,mlx90635
 
   reg:
     maxItems: 1

diff --git a/Bindings/iio/temperature/microchip,mcp9600.yaml b/Bindings/iio/temperature/microchip,mcp9600.yaml
new file mode 100644
index 0000000..d2cafa3
--- /dev/null
+++ b/Bindings/iio/temperature/microchip,mcp9600.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/microchip,mcp9600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP9600 thermocouple EMF converter
+
+maintainers:
+  - Andrew Hepp <andrew.hepp@ahepp.dev>
+
+description:
+  https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf
+
+properties:
+  compatible:
+    const: microchip,mcp9600
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 6
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      enum:
+        - open-circuit
+        - short-circuit
+        - alert1
+        - alert2
+        - alert3
+        - alert4
+
+  thermocouple-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted).
+      Use defines in dt-bindings/iio/temperature/thermocouple.h.
+      Supported types are B, E, J, K, N, R, S, T.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/temperature/thermocouple.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@60 {
+            compatible = "microchip,mcp9600";
+            reg = <0x60>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "open-circuit";
+            thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+            vdd-supply = <&vdd>;
+        };
+    };

diff --git a/Bindings/index.rst b/Bindings/index.rst
index d9002a3..cc1fbdc 100644
--- a/Bindings/index.rst
+++ b/Bindings/index.rst

@@ -4,6 +4,7 @@
    :maxdepth: 1
 
    ABI
+   dts-coding-style
    writing-bindings
    writing-schema
    submitting-patches

diff --git a/Bindings/input/adafruit,seesaw-gamepad.yaml b/Bindings/input/adafruit,seesaw-gamepad.yaml
new file mode 100644
index 0000000..5e86f6d
--- /dev/null
+++ b/Bindings/input/adafruit,seesaw-gamepad.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adafruit Mini I2C Gamepad with seesaw
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+description: |
+  Adafruit Mini I2C Gamepad
+
+    +-----------------------------+
+    |   ___                       |
+    |  /   \               (X)    |
+    | |  S  |  __   __  (Y)   (A) |
+    |  \___/  |ST| |SE|    (B)    |
+    |                             |
+    +-----------------------------+
+
+  S -> 10-bit precision bidirectional analog joystick
+  ST -> Start
+  SE -> Select
+  X, A, B, Y -> Digital action buttons
+
+  Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf
+  Product page: https://www.adafruit.com/product/5743
+  Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw
+
+properties:
+  compatible:
+    const: adafruit,seesaw-gamepad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      The gamepad's IRQ pin triggers a rising edge if interrupts are enabled.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        joystick@50 {
+            compatible = "adafruit,seesaw-gamepad";
+            interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+            reg = <0x50>;
+        };
+    };

diff --git a/Bindings/input/elan,ekth6915.yaml b/Bindings/input/elan,ekth6915.yaml
index 3e2d216..dc4ac41 100644
--- a/Bindings/input/elan,ekth6915.yaml
+++ b/Bindings/input/elan,ekth6915.yaml

@@ -18,8 +18,9 @@
 
 properties:
   compatible:
-    items:
-      - const: elan,ekth6915
+    enum:
+      - elan,ekth6915
+      - ilitek,ili2901
 
   reg:
     const: 0x10

diff --git a/Bindings/input/gpio-keys.yaml b/Bindings/input/gpio-keys.yaml
index 159cd9d..cc78c21 100644
--- a/Bindings/input/gpio-keys.yaml
+++ b/Bindings/input/gpio-keys.yaml

@@ -31,7 +31,23 @@
         maxItems: 1
 
       interrupts:
-        maxItems: 1
+        oneOf:
+          - items:
+              - description: Optional key interrupt or wakeup interrupt
+          - items:
+              - description: Key interrupt
+              - description: Wakeup interrupt
+
+      interrupt-names:
+        description:
+          Optional interrupt names, can be used to specify a separate dedicated
+          wake-up interrupt in addition to the gpio irq
+        oneOf:
+          - items:
+              - enum: [ irq, wakeup ]
+          - items:
+              - const: irq
+              - const: wakeup
 
       label:
         description: Descriptive name of the key.
@@ -97,6 +113,20 @@
       - required:
           - gpios
 
+    allOf:
+      - if:
+          properties:
+            interrupts:
+              minItems: 2
+          required:
+            - interrupts
+        then:
+          properties:
+            interrupt-names:
+              minItems: 2
+          required:
+            - interrupt-names
+
     dependencies:
       wakeup-event-action: [ wakeup-source ]
       linux,input-value: [ gpios ]
@@ -137,6 +167,15 @@
             linux,code = <108>;
             interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
+
+        key-wakeup {
+            label = "GPIO Key WAKEUP";
+            linux,code = <143>;
+            interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>,
+                                  <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "irq", "wakeup";
+            wakeup-source;
+        };
     };
 
 ...

diff --git a/Bindings/input/gpio-mouse.txt b/Bindings/input/gpio-mouse.txt
deleted file mode 100644
index 519510a..0000000
--- a/Bindings/input/gpio-mouse.txt
+++ /dev/null

@@ -1,32 +0,0 @@
-Device-Tree bindings for GPIO attached mice
-
-This simply uses standard GPIO handles to define a simple mouse connected
-to 5-7 GPIO lines.
-
-Required properties:
-	- compatible: must be "gpio-mouse"
-	- scan-interval-ms: The scanning interval in milliseconds
-	- up-gpios: GPIO line phandle to the line indicating "up"
-	- down-gpios: GPIO line phandle to the line indicating "down"
-	- left-gpios: GPIO line phandle to the line indicating "left"
-	- right-gpios: GPIO line phandle to the line indicating "right"
-
-Optional properties:
-	- button-left-gpios: GPIO line handle to the left mouse button
-	- button-middle-gpios: GPIO line handle to the middle mouse button
-	- button-right-gpios: GPIO line handle to the right mouse button
-Example:
-
-#include <dt-bindings/gpio/gpio.h>
-
-gpio-mouse {
-	compatible = "gpio-mouse";
-	scan-interval-ms = <50>;
-	up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-	down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-	left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-	right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-	button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-	button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-	button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};

diff --git a/Bindings/input/gpio-mouse.yaml b/Bindings/input/gpio-mouse.yaml
new file mode 100644
index 0000000..3928ec6
--- /dev/null
+++ b/Bindings/input/gpio-mouse.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-mouse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO attached mouse
+
+description: |
+  This simply uses standard GPIO handles to define a simple mouse connected
+  to 5-7 GPIO lines.
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    const: gpio-mouse
+
+  scan-interval-ms:
+    maxItems: 1
+
+  up-gpios:
+    maxItems: 1
+
+  down-gpios:
+    maxItems: 1
+
+  left-gpios:
+    maxItems: 1
+
+  right-gpios:
+    maxItems: 1
+
+  button-left-gpios:
+    maxItems: 1
+
+  button-middle-gpios:
+    maxItems: 1
+
+  button-right-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - scan-interval-ms
+  - up-gpios
+  - down-gpios
+  - left-gpios
+  - right-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio-mouse {
+        compatible = "gpio-mouse";
+        scan-interval-ms = <50>;
+        up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+        down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+        right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+        button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+        button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+        button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+    };

diff --git a/Bindings/input/iqs269a.yaml b/Bindings/input/iqs269a.yaml
index 3c430d3..2c3f693 100644
--- a/Bindings/input/iqs269a.yaml
+++ b/Bindings/input/iqs269a.yaml

@@ -9,6 +9,9 @@
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS269A is an 8-channel capacitive touch controller that features
   additional Hall-effect and inductive sensing capabilities.
@@ -17,7 +20,10 @@
 
 properties:
   compatible:
-    const: azoteq,iqs269a
+    enum:
+      - azoteq,iqs269a
+      - azoteq,iqs269a-00
+      - azoteq,iqs269a-d0
 
   reg:
     maxItems: 1
@@ -204,6 +210,73 @@
     default: 1
     description: Specifies the slider coordinate filter strength.
 
+  azoteq,touch-hold-ms:
+    multipleOf: 256
+    minimum: 256
+    maximum: 65280
+    default: 5120
+    description:
+      Specifies the length of time (in ms) for which the channel selected by
+      'azoteq,gpio3-select' must be held in a state of touch in order for an
+      approximately 60-ms pulse to be asserted on the GPIO4 pin.
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Specifies the numeric keycodes associated with each available gesture in
+      the following order (enter 0 for unused gestures):
+      0: Slider 0 tap
+      1: Slider 0 hold
+      2: Slider 0 positive flick or swipe
+      3: Slider 0 negative flick or swipe
+      4: Slider 1 tap
+      5: Slider 1 hold
+      6: Slider 1 positive flick or swipe
+      7: Slider 1 negative flick or swipe
+
+  azoteq,gesture-swipe:
+    type: boolean
+    description:
+      Directs the device to interpret axial gestures as a swipe (finger remains
+      on slider) instead of a flick (finger leaves slider).
+
+  azoteq,timeout-tap-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 400
+    description:
+      Specifies the length of time (in ms) within which a slider touch must be
+      released in order to be interpreted as a tap. Default and maximum values
+      as well as step size are reduced by a factor of 4 with device version 2.
+
+  azoteq,timeout-swipe-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 2000
+    description:
+      Specifies the length of time (in ms) within which an axial gesture must be
+      completed in order to be interpreted as a flick or swipe. Default and max-
+      imum values as well as step size are reduced by a factor of 4 with device
+      version 2.
+
+  azoteq,thresh-swipe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    default: 128
+    description:
+      Specifies the number of points across which an axial gesture must travel
+      in order to be interpreted as a flick or swipe.
+
+dependencies:
+  azoteq,gesture-swipe: ["linux,keycodes"]
+  azoteq,timeout-tap-ms: ["linux,keycodes"]
+  azoteq,timeout-swipe-ms: ["linux,keycodes"]
+  azoteq,thresh-swipe: ["linux,keycodes"]
+
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -454,6 +527,21 @@
 
     additionalProperties: false
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs269a-d0
+then:
+  patternProperties:
+    "^channel@[0-7]$":
+      properties:
+        azoteq,slider1-select: false
+else:
+  properties:
+    azoteq,touch-hold-ms: false
+
 required:
   - compatible
   - reg
@@ -484,6 +572,14 @@
                     azoteq,hall-enable;
                     azoteq,suspend-mode = <2>;
 
+                    linux,keycodes = <KEY_PLAYPAUSE>,
+                                     <KEY_STOPCD>,
+                                     <KEY_NEXTSONG>,
+                                     <KEY_PREVIOUSSONG>;
+
+                    azoteq,timeout-tap-ms = <400>;
+                    azoteq,timeout-swipe-ms = <800>;
+
                     channel@0 {
                             reg = <0x0>;
 

diff --git a/Bindings/input/mediatek,pmic-keys.yaml b/Bindings/input/mediatek,pmic-keys.yaml
index e34c9e7..70567d9 100644
--- a/Bindings/input/mediatek,pmic-keys.yaml
+++ b/Bindings/input/mediatek,pmic-keys.yaml

@@ -90,26 +90,4 @@
 
 unevaluatedProperties: false
 
-examples:
-  - |
-    #include <dt-bindings/input/input.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    pmic {
-        compatible = "mediatek,mt6397";
-
-        keys {
-          compatible = "mediatek,mt6397-keys";
-          mediatek,long-press-mode = <1>;
-          power-off-time-sec = <0>;
-
-          key-power {
-            linux,keycodes = <KEY_POWER>;
-            wakeup-source;
-          };
-
-          key-home {
-            linux,keycodes = <KEY_VOLUMEDOWN>;
-          };
-        };
-    };
+...

diff --git a/Bindings/input/microchip,cap11xx.yaml b/Bindings/input/microchip,cap11xx.yaml
index 5b5d4f7..7ade03f 100644
--- a/Bindings/input/microchip,cap11xx.yaml
+++ b/Bindings/input/microchip,cap11xx.yaml

@@ -45,13 +45,13 @@
       Enables the Linux input system's autorepeat feature on the input device.
 
   linux,keycodes:
-    minItems: 6
-    maxItems: 6
+    minItems: 3
+    maxItems: 8
     description: |
       Specifies an array of numeric keycode values to
       be used for the channels. If this property is
       omitted, KEY_A, KEY_B, etc are used as defaults.
-      The array must have exactly six entries.
+      The number of entries must correspond to the number of channels.
 
   microchip,sensor-gain:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -70,6 +70,59 @@
       open drain. This property allows using the active
       high push-pull output.
 
+  microchip,sensitivity-delta-sense:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+    description:
+      Controls the sensitivity multiplier of a touch detection.
+      Higher value means more sensitive settings.
+      At the more sensitive settings, touches are detected for a smaller delta
+      capacitance corresponding to a "lighter" touch.
+
+  microchip,signal-guard:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      enum: [0, 1]
+    description: |
+      0 - off
+      1 - on
+      The signal guard isolates the signal from virtual grounds.
+      If enabled then the behavior of the channel is changed to signal guard.
+      The number of entries must correspond to the number of channels.
+
+  microchip,input-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 127
+    description:
+      Specifies the delta threshold that is used to determine if a touch has
+      been detected. A higher value means a larger difference in capacitance
+      is required for a touch to be registered, making the touch sensor less
+      sensitive.
+      The number of entries must correspond to the number of channels.
+
+  microchip,calib-sensitivity:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      enum: [1, 2, 4]
+    description: |
+      Specifies an array of numeric values that controls the gain
+      used by the calibration routine to enable sensor inputs
+      to be more sensitive for proximity detection.
+      Gain is based on touch pad capacitance range
+      1 - 5-50pF
+      2 - 0-25pF
+      4 - 0-12.5pF
+      The number of entries must correspond to the number of channels.
+
 patternProperties:
   "^led@[0-7]$":
     type: object
@@ -99,10 +152,29 @@
           contains:
             enum:
               - microchip,cap1106
+              - microchip,cap1203
+              - microchip,cap1206
+              - microchip,cap1293
+              - microchip,cap1298
     then:
       patternProperties:
         "^led@[0-7]$": false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,cap1106
+              - microchip,cap1126
+              - microchip,cap1188
+              - microchip,cap1203
+              - microchip,cap1206
+    then:
+      properties:
+        microchip,signal-guard: false
+        microchip,calib-sensitivity: false
+
 required:
   - compatible
   - interrupts
@@ -122,6 +194,8 @@
         reg = <0x28>;
         autorepeat;
         microchip,sensor-gain = <2>;
+        microchip,sensitivity-delta-sense = <16>;
+        microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>;
 
         linux,keycodes = <103>,	/* KEY_UP */
                          <106>,	/* KEY_RIGHT */

diff --git a/Bindings/input/sprd,sc27xx-vibrator.yaml b/Bindings/input/sprd,sc27xx-vibrator.yaml
index a401a0b..4c8d303 100644
--- a/Bindings/input/sprd,sc27xx-vibrator.yaml
+++ b/Bindings/input/sprd,sc27xx-vibrator.yaml

@@ -28,21 +28,4 @@
 
 additionalProperties: false
 
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    sc2731_pmic: pmic@0 {
-      compatible = "sprd,sc2731";
-      reg = <0 0>;
-      spi-max-frequency = <26000000>;
-      interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-controller;
-      #interrupt-cells = <2>;
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      vibrator@eb4 {
-        compatible = "sprd,sc2731-vibrator";
-        reg = <0xeb4>;
-      };
-    };
+...

diff --git a/Bindings/input/ti,drv2665.txt b/Bindings/input/ti,drv2665.txt
deleted file mode 100644
index 1ba97ac..0000000
--- a/Bindings/input/ti,drv2665.txt
+++ /dev/null

@@ -1,17 +0,0 @@
-* Texas Instruments - drv2665 Haptics driver
-
-Required properties:
-	- compatible - "ti,drv2665" - DRV2665
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
-	compatible = "ti,drv2665";
-	reg = <0x59>;
-	vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2665

diff --git a/Bindings/input/ti,drv2667.txt b/Bindings/input/ti,drv2667.txt
deleted file mode 100644
index 996382c..0000000
--- a/Bindings/input/ti,drv2667.txt
+++ /dev/null

@@ -1,17 +0,0 @@
-* Texas Instruments - drv2667 Haptics driver
-
-Required properties:
-	- compatible - "ti,drv2667" - DRV2667
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
-	compatible = "ti,drv2667";
-	reg = <0x59>;
-	vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2667

diff --git a/Bindings/input/ti,drv266x.yaml b/Bindings/input/ti,drv266x.yaml
new file mode 100644
index 0000000..da18188
--- /dev/null
+++ b/Bindings/input/ti,drv266x.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv266x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv266x Haptics driver
+
+description: |
+  Product Page:
+    http://www.ti.com/product/drv2665
+    http://www.ti.com/product/drv2667
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2665
+      - ti,drv2667
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Required supply regulator
+
+required:
+  - compatible
+  - reg
+  - vbat-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@59 {
+            compatible = "ti,drv2667";
+            reg = <0x59>;
+            vbat-supply = <&vbat>;
+        };
+    };

diff --git a/Bindings/input/touchscreen/neonode,zforce.yaml b/Bindings/input/touchscreen/neonode,zforce.yaml
new file mode 100644
index 0000000..c2ee89b
--- /dev/null
+++ b/Bindings/input/touchscreen/neonode,zforce.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Neonode infrared touchscreen controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: neonode,zforce
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+
+  x-size:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  y-size:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@50 {
+            compatible = "neonode,zforce";
+            reg = <0x50>;
+            interrupts = <2 0>;
+            vdd-supply = <&reg_zforce_vdd>;
+
+            reset-gpios = <&gpio5 9 0>; /* RST */
+            irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
+
+            touchscreen-min-x = <0>;
+            touchscreen-size-x = <800>;
+            touchscreen-min-y = <0>;
+            touchscreen-size-y = <600>;
+        };
+    };
+...

diff --git a/Bindings/input/touchscreen/samsung,s6sy761.txt b/Bindings/input/touchscreen/samsung,s6sy761.txt
deleted file mode 100644
index 6805d10..0000000
--- a/Bindings/input/touchscreen/samsung,s6sy761.txt
+++ /dev/null

@@ -1,32 +0,0 @@
-* Samsung S6SY761 touchscreen controller
-
-Required properties:
-- compatible		: must be "samsung,s6sy761"
-- reg			: I2C slave address, (e.g. 0x48)
-- interrupts		: interrupt specification
-- avdd-supply		: analogic power supply
-- vdd-supply		: power supply
-
-Optional properties:
-- touchscreen-size-x	: see touchscreen.txt. This property is embedded in the
-			  device. If defined it forces a different x resolution.
-- touchscreen-size-y	: see touchscreen.txt. This property is embedded in the
-			  device. If defined it forces a different y resolution.
-
-Example:
-
-i2c@00000000 {
-
-	/* ... */
-
-	touchscreen@48 {
-		compatible = "samsung,s6sy761";
-		reg = <0x48>;
-		interrupt-parent = <&gpa1>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		avdd-supply = <&ldo30_reg>;
-		vdd-supply = <&ldo31_reg>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-	};
-};

diff --git a/Bindings/input/touchscreen/samsung,s6sy761.yaml b/Bindings/input/touchscreen/samsung,s6sy761.yaml
new file mode 100644
index 0000000..1ffd17a
--- /dev/null
+++ b/Bindings/input/touchscreen/samsung,s6sy761.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/samsung,s6sy761.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6SY761 touchscreen controller
+
+maintainers:
+  - Andi Shyti <andi.shyti@kernel.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6sy761
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply: true
+  vdd-supply: true
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - vdd-supply
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@48 {
+            compatible = "samsung,s6sy761";
+            reg = <0x48>;
+            interrupt-parent = <&gpa1>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+            avdd-supply = <&ldo30_reg>;
+            vdd-supply = <&ldo31_reg>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+        };
+    };

diff --git a/Bindings/input/touchscreen/zforce_ts.txt b/Bindings/input/touchscreen/zforce_ts.txt
deleted file mode 100644
index e3c27c4..0000000
--- a/Bindings/input/touchscreen/zforce_ts.txt
+++ /dev/null

@@ -1,34 +0,0 @@
-* Neonode infrared touchscreen controller
-
-Required properties:
-- compatible: must be "neonode,zforce"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- reset-gpios: reset gpio the chip is connected to
-- x-size: horizontal resolution of touchscreen
-- y-size: vertical resolution of touchscreen
-
-Optional properties:
-- irq-gpios : interrupt gpio the chip is connected to
-- vdd-supply: Regulator controlling the controller supply
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		zforce_ts@50 {
-			compatible = "neonode,zforce";
-			reg = <0x50>;
-			interrupts = <2 0>;
-			vdd-supply = <&reg_zforce_vdd>;
-
-			reset-gpios = <&gpio5 9 0>; /* RST */
-			irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
-
-			x-size = <800>;
-			y-size = <600>;
-		};
-
-		/* ... */
-	};

diff --git a/Bindings/interconnect/qcom,msm8998-bwmon.yaml b/Bindings/interconnect/qcom,msm8998-bwmon.yaml
index 73f809c..05067e1 100644
--- a/Bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/Bindings/interconnect/qcom,msm8998-bwmon.yaml

@@ -25,13 +25,16 @@
       - const: qcom,msm8998-bwmon       # BWMON v4
       - items:
           - enum:
+              - qcom,qcm2290-cpu-bwmon
               - qcom,sc7180-cpu-bwmon
               - qcom,sc7280-cpu-bwmon
               - qcom,sc8280xp-cpu-bwmon
               - qcom,sdm845-cpu-bwmon
+              - qcom,sm6115-cpu-bwmon
               - qcom,sm6350-llcc-bwmon
               - qcom,sm8250-cpu-bwmon
               - qcom,sm8550-cpu-bwmon
+              - qcom,sm8650-cpu-bwmon
           - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
       - items:
           - enum:
@@ -40,6 +43,7 @@
               - qcom,sm6350-cpu-bwmon
               - qcom,sm8250-llcc-bwmon
               - qcom,sm8550-llcc-bwmon
+              - qcom,sm8650-llcc-bwmon
           - const: qcom,sc7280-llcc-bwmon
       - const: qcom,sc7280-llcc-bwmon   # BWMON v5
       - const: qcom,sdm845-llcc-bwmon   # BWMON v5

diff --git a/Bindings/interconnect/qcom,sm6115.yaml b/Bindings/interconnect/qcom,sm6115.yaml
new file mode 100644
index 0000000..14b1a0b
--- /dev/null
+++ b/Bindings/interconnect/qcom,sm6115.yaml

@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The Qualcomm SM6115 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-bimc
+      - qcom,sm6115-cnoc
+      - qcom,sm6115-snoc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    $ref: qcom,rpm-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6115-clk-virt
+          - qcom,sm6115-mmrt-virt
+          - qcom,sm6115-mmnrt-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm6115-cnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: USB-NoC AXI clock
+
+        clock-names:
+          items:
+            - const: usb_axi
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm6115-snoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: CPU-NoC AXI clock.
+            - description: UFS-NoC AXI clock.
+            - description: USB-NoC AXI clock.
+            - description: IPA clock.
+
+        clock-names:
+          items:
+            - const: cpu_axi
+            - const: ufs_axi
+            - const: usb_axi
+            - const: ipa
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6115-bimc
+            - qcom,sm6115-clk-virt
+            - qcom,sm6115-mmrt-virt
+            - qcom,sm6115-mmnrt-virt
+
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,sm6115-snoc";
+        reg = <0x01880000 0x60200>;
+        clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+                 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+                 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+                 <&rpmcc RPM_SMD_IPA_CLK>;
+        clock-names = "cpu_axi",
+                      "ufs_axi",
+                      "usb_axi",
+                      "ipa";
+        #interconnect-cells = <1>;
+
+        qup_virt: interconnect-clk {
+            compatible = "qcom,sm6115-clk-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,sm6115-mmnrt-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,sm6115-mmrt-virt";
+            #interconnect-cells = <1>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,sm6115-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+    };

diff --git a/Bindings/interconnect/qcom,sm8650-rpmh.yaml b/Bindings/interconnect/qcom,sm8650-rpmh.yaml
new file mode 100644
index 0000000..f9322de
--- /dev/null
+++ b/Bindings/interconnect/qcom,sm8650-rpmh.yaml

@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8650-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8650
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8650-aggre1-noc
+      - qcom,sm8650-aggre2-noc
+      - qcom,sm8650-clk-virt
+      - qcom,sm8650-cnoc-main
+      - qcom,sm8650-config-noc
+      - qcom,sm8650-gem-noc
+      - qcom,sm8650-lpass-ag-noc
+      - qcom,sm8650-lpass-lpiaon-noc
+      - qcom,sm8650-lpass-lpicx-noc
+      - qcom,sm8650-mc-virt
+      - qcom,sm8650-mmss-noc
+      - qcom,sm8650-nsp-noc
+      - qcom,sm8650-pcie-anoc
+      - qcom,sm8650-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-clk-virt
+              - qcom,sm8650-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre1-noc
+              - qcom,sm8650-aggre2-noc
+              - qcom,sm8650-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8650-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8650-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };

diff --git a/Bindings/interconnect/qcom,x1e80100-rpmh.yaml b/Bindings/interconnect/qcom,x1e80100-rpmh.yaml
new file mode 100644
index 0000000..08b0210
--- /dev/null
+++ b/Bindings/interconnect/qcom,x1e80100-rpmh.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,x1e80100-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on X1E80100
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,x1e80100-aggre1-noc
+      - qcom,x1e80100-aggre2-noc
+      - qcom,x1e80100-clk-virt
+      - qcom,x1e80100-cnoc-cfg
+      - qcom,x1e80100-cnoc-main
+      - qcom,x1e80100-gem-noc
+      - qcom,x1e80100-lpass-ag-noc
+      - qcom,x1e80100-lpass-lpiaon-noc
+      - qcom,x1e80100-lpass-lpicx-noc
+      - qcom,x1e80100-mc-virt
+      - qcom,x1e80100-mmss-noc
+      - qcom,x1e80100-nsp-noc
+      - qcom,x1e80100-pcie-center-anoc
+      - qcom,x1e80100-pcie-north-anoc
+      - qcom,x1e80100-pcie-south-anoc
+      - qcom,x1e80100-system-noc
+      - qcom,x1e80100-usb-center-anoc
+      - qcom,x1e80100-usb-north-anoc
+      - qcom,x1e80100-usb-south-anoc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,x1e80100-clk-virt
+              - qcom,x1e80100-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,x1e80100-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,x1e80100-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };

diff --git a/Bindings/interrupt-controller/loongson,liointc.yaml b/Bindings/interrupt-controller/loongson,liointc.yaml
index 00b570c..60441f0 100644
--- a/Bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Bindings/interrupt-controller/loongson,liointc.yaml

@@ -11,8 +11,13 @@
 
 description: |
   This interrupt controller is found in the Loongson-3 family of chips and
-  Loongson-2K1000 chip, as the primary package interrupt controller which
+  Loongson-2K series chips, as the primary package interrupt controller which
   can route local I/O interrupt to interrupt lines of cores.
+  Be aware of the following points.
+  1.The Loongson-2K0500 is a single core CPU;
+  2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we
+    need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt
+    sources respectively.
 
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#
@@ -33,6 +38,7 @@
       - const: main
       - const: isr0
       - const: isr1
+    minItems: 2
 
   interrupt-controller: true
 
@@ -45,11 +51,9 @@
   interrupt-names:
     description: List of names for the parent interrupts.
     items:
-      - const: int0
-      - const: int1
-      - const: int2
-      - const: int3
+      pattern: int[0-3]
     minItems: 1
+    maxItems: 4
 
   '#interrupt-cells':
     const: 2
@@ -69,6 +73,7 @@
   - compatible
   - reg
   - interrupts
+  - interrupt-names
   - interrupt-controller
   - '#interrupt-cells'
   - loongson,parent_int_map
@@ -86,7 +91,8 @@
 then:
   properties:
     reg:
-      minItems: 3
+      minItems: 2
+      maxItems: 3
 
   required:
     - reg-names

diff --git a/Bindings/interrupt-controller/qcom,mpm.yaml b/Bindings/interrupt-controller/qcom,mpm.yaml
index 6a20611..ebb40c4 100644
--- a/Bindings/interrupt-controller/qcom,mpm.yaml
+++ b/Bindings/interrupt-controller/qcom,mpm.yaml

@@ -29,6 +29,12 @@
     maxItems: 1
     description:
       Specifies the base address and size of vMPM registers in RPM MSG RAM.
+    deprecated: true
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the APSS MPM slice of the RPM Message RAM
 
   interrupts:
     maxItems: 1
@@ -67,34 +73,46 @@
 
 required:
   - compatible
-  - reg
   - interrupts
   - mboxes
   - interrupt-controller
   - '#interrupt-cells'
   - qcom,mpm-pin-count
   - qcom,mpm-pin-map
+  - qcom,rpm-msg-ram
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    mpm: interrupt-controller@45f01b8 {
-        compatible = "qcom,mpm";
-        interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-        reg = <0x45f01b8 0x1000>;
-        mboxes = <&apcs_glb 1>;
-        interrupt-controller;
-        #interrupt-cells = <2>;
-        interrupt-parent = <&intc>;
-        qcom,mpm-pin-count = <96>;
-        qcom,mpm-pin-map = <2 275>,
-                           <5 296>,
-                           <12 422>,
-                           <24 79>,
-                           <86 183>,
-                           <90 260>,
-                           <91 260>;
-        #power-domain-cells = <0>;
+
+    remoteproc-rpm {
+        compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
+
+        glink-edge {
+            compatible = "qcom,glink-rpm";
+
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,rpm-msg-ram = <&rpm_msg_ram>;
+            mboxes = <&apcs_glb 0>;
+        };
+
+        mpm: interrupt-controller {
+            compatible = "qcom,mpm";
+            qcom,rpm-msg-ram = <&apss_mpm>;
+            interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apcs_glb 1>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&intc>;
+            qcom,mpm-pin-count = <96>;
+            qcom,mpm-pin-map = <2 275>,
+                               <5 296>,
+                               <12 422>,
+                               <24 79>,
+                               <86 183>,
+                               <91 260>;
+            #power-domain-cells = <0>;
+        };
     };

diff --git a/Bindings/interrupt-controller/qcom,pdc.yaml b/Bindings/interrupt-controller/qcom,pdc.yaml
index 86d6189..4bdc832 100644
--- a/Bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Bindings/interrupt-controller/qcom,pdc.yaml

@@ -35,12 +35,16 @@
           - qcom,sdm845-pdc
           - qcom,sdx55-pdc
           - qcom,sdx65-pdc
+          - qcom,sdx75-pdc
           - qcom,sm4450-pdc
           - qcom,sm6350-pdc
           - qcom,sm8150-pdc
           - qcom,sm8250-pdc
           - qcom,sm8350-pdc
           - qcom,sm8450-pdc
+          - qcom,sm8550-pdc
+          - qcom,sm8650-pdc
+          - qcom,x1e80100-pdc
       - const: qcom,pdc
 
   reg:

diff --git a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index 2ef3081..d3b5aec 100644
--- a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml

@@ -26,6 +26,7 @@
           - renesas,r9a07g043u-irqc   # RZ/G2UL
           - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
           - renesas,r9a07g054-irqc    # RZ/V2L
+          - renesas,r9a08g045-irqc    # RZ/G3S
       - const: renesas,rzg2l-irqc
 
   '#interrupt-cells':
@@ -167,7 +168,9 @@
       properties:
         compatible:
           contains:
-            const: renesas,r9a07g043u-irqc
+            enum:
+              - renesas,r9a07g043u-irqc
+              - renesas,r9a08g045-irqc
     then:
       properties:
         interrupts:

diff --git a/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 0c07e8d..709b221 100644
--- a/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml

@@ -66,6 +66,7 @@
           - enum:
               - allwinner,sun20i-d1-plic
               - sophgo,cv1800b-plic
+              - sophgo,cv1812h-plic
               - sophgo,sg2042-plic
               - thead,th1520-plic
           - const: thead,c900-plic

diff --git a/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
index 2b153d7..e44e4e5 100644
--- a/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
+++ b/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml

@@ -55,8 +55,8 @@
   - |
     #include <dt-bindings/interrupt-controller/irq-st.h>
     irq-syscfg {
-        compatible    = "st,stih407-irq-syscfg";
-        st,syscfg     = <&syscfg_cpu>;
+        compatible = "st,stih407-irq-syscfg";
+        st,syscfg = <&syscfg_cpu>;
         st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
                         <ST_IRQ_SYSCFG_PMU_1>;
         st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,

diff --git a/Bindings/iommu/apple,dart.yaml b/Bindings/iommu/apple,dart.yaml
index 903edf8..7adb1de 100644
--- a/Bindings/iommu/apple,dart.yaml
+++ b/Bindings/iommu/apple,dart.yaml

@@ -24,6 +24,7 @@
   compatible:
     enum:
       - apple,t8103-dart
+      - apple,t8103-usb4-dart
       - apple,t8110-dart
       - apple,t6000-dart
 

diff --git a/Bindings/iommu/arm,smmu.yaml b/Bindings/iommu/arm,smmu.yaml
index aa9e1c0..a4042ae 100644
--- a/Bindings/iommu/arm,smmu.yaml
+++ b/Bindings/iommu/arm,smmu.yaml

@@ -56,6 +56,8 @@
               - qcom,sm8350-smmu-500
               - qcom,sm8450-smmu-500
               - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
+              - qcom,x1e80100-smmu-500
           - const: qcom,smmu-500
           - const: arm,mmu-500
 
@@ -89,6 +91,8 @@
               - qcom,sm8150-smmu-500
               - qcom,sm8250-smmu-500
               - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
           - const: qcom,adreno-smmu
           - const: qcom,smmu-500
           - const: arm,mmu-500
@@ -434,6 +438,30 @@
         compatible:
           items:
             - enum:
+                - qcom,sm8350-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: iface
+            - const: ahb
+            - const: hlos1_vote_gpu_smmu
+            - const: cx_gmu
+            - const: hub_cx_int
+            - const: hub_aon
+        clocks:
+          minItems: 7
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - enum:
                 - qcom,sm6115-smmu-500
                 - qcom,sm6125-smmu-500
             - const: qcom,adreno-smmu
@@ -453,6 +481,50 @@
             - description: Voter clock required for HLOS SMMU access
             - description: Interface clock required for register access
 
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm8450-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: gmu
+            - const: hub
+            - const: hlos
+            - const: bus
+            - const: iface
+            - const: ahb
+
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU HUB clock
+            - description: HLOS vote clock
+            - description: GPU memory bus clock
+            - description: GPU SNoC bus clock
+            - description: GPU AHB clock
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm8550-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: hlos
+            - const: bus
+            - const: iface
+            - const: ahb
+
+        clocks:
+          items:
+            - description: HLOS vote clock
+            - description: GPU memory bus clock
+            - description: GPU SNoC bus clock
+            - description: GPU AHB clock
+
   # Disallow clocks for all other platforms with specific compatibles
   - if:
       properties:
@@ -472,9 +544,8 @@
               - qcom,sdx65-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm6375-smmu-500
-              - qcom,sm8350-smmu-500
-              - qcom,sm8450-smmu-500
-              - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
+              - qcom,x1e80100-smmu-500
     then:
       properties:
         clock-names: false

diff --git a/Bindings/iommu/rockchip,iommu.yaml b/Bindings/iommu/rockchip,iommu.yaml
index ba9124f..621dde0 100644
--- a/Bindings/iommu/rockchip,iommu.yaml
+++ b/Bindings/iommu/rockchip,iommu.yaml

@@ -19,9 +19,14 @@
 
 properties:
   compatible:
-    enum:
-      - rockchip,iommu
-      - rockchip,rk3568-iommu
+    oneOf:
+      - enum:
+          - rockchip,iommu
+          - rockchip,rk3568-iommu
+      - items:
+          - enum:
+              - rockchip,rk3588-iommu
+          - const: rockchip,rk3568-iommu
 
   reg:
     items:

diff --git a/Bindings/leds/allwinner,sun50i-a100-ledc.yaml b/Bindings/leds/allwinner,sun50i-a100-ledc.yaml
new file mode 100644
index 0000000..760cb33
--- /dev/null
+++ b/Bindings/leds/allwinner,sun50i-a100-ledc.yaml

@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A100 LED Controller
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
+  interface to drive up to 1024 RGB LEDs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun50i-a100-ledc
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-ledc
+              - allwinner,sun50i-r329-ledc
+          - const: allwinner,sun50i-a100-ledc
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus clock
+      - description: Module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+    description: TX DMA channel
+
+  dma-names:
+    const: tx
+
+  allwinner,pixel-format:
+    description: Pixel format (subpixel transmission order), default is "grb"
+    enum:
+      - bgr
+      - brg
+      - gbr
+      - grb
+      - rbg
+      - rgb
+
+  allwinner,t0h-ns:
+    default: 336
+    description: Length of high pulse when transmitting a "0" bit
+
+  allwinner,t0l-ns:
+    default: 840
+    description: Length of low pulse when transmitting a "0" bit
+
+  allwinner,t1h-ns:
+    default: 882
+    description: Length of high pulse when transmitting a "1" bit
+
+  allwinner,t1l-ns:
+    default: 294
+    description: Length of low pulse when transmitting a "1" bit
+
+  allwinner,treset-ns:
+    default: 300000
+    description: Minimum delay between transmission frames
+
+patternProperties:
+  "^multi-led@[0-9a-f]+$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of the LED in the series (must be contiguous)
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    ledc: led-controller@2008000 {
+      compatible = "allwinner,sun20i-d1-ledc",
+                   "allwinner,sun50i-a100-ledc";
+      reg = <0x2008000 0x400>;
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu 12>, <&ccu 34>;
+      clock-names = "bus", "mod";
+      resets = <&ccu 12>;
+      dmas = <&dma 42>;
+      dma-names = "tx";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      multi-led@0 {
+        reg = <0x0>;
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_INDICATOR;
+      };
+    };
+
+...

diff --git a/Bindings/leds/awinic,aw200xx.yaml b/Bindings/leds/awinic,aw200xx.yaml
index feb5feb..54d6d1f 100644
--- a/Bindings/leds/awinic,aw200xx.yaml
+++ b/Bindings/leds/awinic,aw200xx.yaml

@@ -10,15 +10,19 @@
   - Martin Kurbanov <mmkurbanov@sberdevices.ru>
 
 description: |
-  This controller is present on AW20036/AW20054/AW20072.
-  It is a 3x12/6x9/6x12 matrix LED programmed via
-  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
-  3 pattern controllers for auto breathing or group dimming control.
+  It is a matrix LED driver programmed via an I2C interface. Devices have
+  a set of individually controlled leds and support 3 pattern controllers
+  for auto breathing or group dimming control. Supported devices:
+    - AW20036 (3x12) 36 LEDs
+    - AW20054 (6x9)  54 LEDs
+    - AW20072 (6x12) 72 LEDs
+    - AW20108 (9x12) 108 LEDs
 
   For more product information please see the link below:
   aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
   aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
   aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+  aw20108 - https://www.awinic.com/en/productDetail/AW20108QNR#tech-docs
 
 properties:
   compatible:
@@ -26,6 +30,7 @@
       - awinic,aw20036
       - awinic,aw20054
       - awinic,aw20072
+      - awinic,aw20108
 
   reg:
     maxItems: 1
@@ -36,13 +41,11 @@
   "#size-cells":
     const: 0
 
-  awinic,display-rows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      Leds matrix size
+  enable-gpios:
+    maxItems: 1
 
 patternProperties:
-  "^led@[0-9a-f]$":
+  "^led@[0-9a-f]+$":
     type: object
     $ref: common.yaml#
     unevaluatedProperties: false
@@ -60,16 +63,11 @@
           since the chip has a single global setting.
           The maximum output current of each LED is calculated by the
           following formula:
-            IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+            IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
           And the minimum output current formula:
-            IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
-
-required:
-  - compatible
-  - reg
-  - "#address-cells"
-  - "#size-cells"
-  - awinic,display-rows
+            IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
+          where max-current-switch-number is determinated by led configuration
+          and depends on how leds are physically connected to the led driver.
 
 allOf:
   - if:
@@ -78,18 +76,67 @@
           contains:
             const: awinic,aw20036
     then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 36
+
+  - if:
       properties:
-        awinic,display-rows:
-          enum: [1, 2, 3]
-    else:
+        compatible:
+          contains:
+            const: awinic,aw20054
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 54
+
+  - if:
       properties:
-        awinic,display-rows:
-          enum: [1, 2, 3, 4, 5, 6, 7]
+        compatible:
+          contains:
+            const: awinic,aw20072
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 72
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20108
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 108
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
 
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -101,7 +148,7 @@
             reg = <0x3a>;
             #address-cells = <1>;
             #size-cells = <0>;
-            awinic,display-rows = <3>;
+            enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
 
             led@0 {
                 reg = <0x0>;

diff --git a/Bindings/leds/backlight/mps,mp3309c.yaml b/Bindings/leds/backlight/mps,mp3309c.yaml
index 4191e33..527a373 100644
--- a/Bindings/leds/backlight/mps,mp3309c.yaml
+++ b/Bindings/leds/backlight/mps,mp3309c.yaml

@@ -14,8 +14,8 @@
   programmable switching frequency to optimize efficiency.
   It supports two different dimming modes:
 
-  - analog mode, via I2C commands (default)
-  - PWM controlled mode.
+  - analog mode, via I2C commands, as default mode (32 dimming levels)
+  - PWM controlled mode (optional)
 
   The datasheet is available at:
   https://www.monolithicpower.com/en/mp3309c.html
@@ -50,8 +50,6 @@
 required:
   - compatible
   - reg
-  - max-brightness
-  - default-brightness
 
 unevaluatedProperties: false
 
@@ -66,8 +64,8 @@
             compatible = "mps,mp3309c";
             reg = <0x17>;
             pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
-            max-brightness = <100>;
-            default-brightness = <80>;
+            brightness-levels = <0 4 8 16 32 64 128 255>;
+            default-brightness = <6>;
             mps,overvoltage-protection-microvolt = <24000000>;
         };
     };

diff --git a/Bindings/leds/common.yaml b/Bindings/leds/common.yaml
index c8d0ba5..55a8d13 100644
--- a/Bindings/leds/common.yaml
+++ b/Bindings/leds/common.yaml

@@ -167,7 +167,7 @@
       Note that this flag is mainly used for PWM-LEDs, where it is not possible
       to map brightness to current. Drivers for other controllers should use
       led-max-microamp.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   panic-indicator:
     description:

diff --git a/Bindings/leds/qcom,spmi-flash-led.yaml b/Bindings/leds/qcom,spmi-flash-led.yaml
index a8736fd..1ba6076 100644
--- a/Bindings/leds/qcom,spmi-flash-led.yaml
+++ b/Bindings/leds/qcom,spmi-flash-led.yaml

@@ -89,9 +89,11 @@
 examples:
   - |
     #include <dt-bindings/leds/common.h>
-    spmi {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         led-controller@ee00 {
             compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
             reg = <0xee00>;

diff --git a/Bindings/loongarch/cpus.yaml b/Bindings/loongarch/cpus.yaml
new file mode 100644
index 0000000..f175872
--- /dev/null
+++ b/Bindings/loongarch/cpus.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPUs
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description:
+  This document describes the list of LoongArch CPU cores that support FDT,
+  it describe the layout of CPUs in a system through the "cpus" node.
+
+allOf:
+  - $ref: /schemas/cpu.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,la264
+      - loongson,la364
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            compatible = "loongson,la264";
+            device_type = "cpu";
+            reg = <0>;
+            clocks = <&clk LOONGSON2_NODE_CLK>;
+        };
+
+        cpu@1 {
+            compatible = "loongson,la264";
+            device_type = "cpu";
+            reg = <1>;
+            clocks = <&clk LOONGSON2_NODE_CLK>;
+        };
+    };
+
+...

diff --git a/Bindings/loongarch/loongson.yaml b/Bindings/loongarch/loongson.yaml
new file mode 100644
index 0000000..e1a4a97
--- /dev/null
+++ b/Bindings/loongarch/loongson.yaml

@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson SoC-based boards
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Loongson-2K0500 processor based boards
+        items:
+          - const: loongson,ls2k0500-ref
+          - const: loongson,ls2k0500
+
+      - description: Loongson-2K1000 processor based boards
+        items:
+          - const: loongson,ls2k1000-ref
+          - const: loongson,ls2k1000
+
+      - description: Loongson-2K2000 processor based boards
+        items:
+          - const: loongson,ls2k2000-ref
+          - const: loongson,ls2k2000
+
+additionalProperties: true
+
+...

diff --git a/Bindings/mailbox/qcom,apcs-kpss-global.yaml b/Bindings/mailbox/qcom,apcs-kpss-global.yaml
index a38413f..79eb523 100644
--- a/Bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Bindings/mailbox/qcom,apcs-kpss-global.yaml

@@ -25,6 +25,24 @@
           - const: qcom,ipq6018-apcs-apps-global
       - items:
           - enum:
+              - qcom,qcs404-apcs-apps-global
+          - const: qcom,msm8916-apcs-kpss-global
+          - const: syscon
+      - items:
+          - enum:
+              - qcom,msm8976-apcs-kpss-global
+          - const: qcom,msm8994-apcs-kpss-global
+          - const: syscon
+      - items:
+          - enum:
+              - qcom,msm8998-apcs-hmss-global
+              - qcom,sdm660-apcs-hmss-global
+              - qcom,sm4250-apcs-hmss-global
+              - qcom,sm6115-apcs-hmss-global
+              - qcom,sm6125-apcs-hmss-global
+          - const: qcom,msm8994-apcs-kpss-global
+      - items:
+          - enum:
               - qcom,sc7180-apss-shared
               - qcom,sc8180x-apss-shared
               - qcom,sm8150-apss-shared
@@ -34,22 +52,14 @@
               - qcom,msm8916-apcs-kpss-global
               - qcom,msm8939-apcs-kpss-global
               - qcom,msm8953-apcs-kpss-global
-              - qcom,msm8976-apcs-kpss-global
               - qcom,msm8994-apcs-kpss-global
-              - qcom,qcs404-apcs-apps-global
               - qcom,sdx55-apcs-gcc
           - const: syscon
       - enum:
           - qcom,ipq6018-apcs-apps-global
-          - qcom,ipq8074-apcs-apps-global
           - qcom,msm8996-apcs-hmss-global
-          - qcom,msm8998-apcs-hmss-global
           - qcom,qcm2290-apcs-hmss-global
-          - qcom,sdm660-apcs-hmss-global
           - qcom,sdm845-apss-shared
-          - qcom,sm4250-apcs-hmss-global
-          - qcom,sm6115-apcs-hmss-global
-          - qcom,sm6125-apcs-hmss-global
 
   reg:
     maxItems: 1
@@ -80,10 +90,9 @@
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,msm8916-apcs-kpss-global
-            - qcom,msm8939-apcs-kpss-global
-            - qcom,qcs404-apcs-apps-global
+          contains:
+            enum:
+              - qcom,msm8916-apcs-kpss-global
     then:
       properties:
         clocks:
@@ -100,6 +109,25 @@
         compatible:
           contains:
             enum:
+              - qcom,msm8939-apcs-kpss-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+            - description: reference clock
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sdx55-apcs-gcc
     then:
       properties:
@@ -113,6 +141,7 @@
             - const: ref
             - const: pll
             - const: aux
+
   - if:
       properties:
         compatible:
@@ -137,16 +166,10 @@
         compatible:
           enum:
             - qcom,msm8953-apcs-kpss-global
-            - qcom,msm8976-apcs-kpss-global
             - qcom,msm8994-apcs-kpss-global
             - qcom,msm8996-apcs-hmss-global
-            - qcom,msm8998-apcs-hmss-global
             - qcom,qcm2290-apcs-hmss-global
-            - qcom,sdm660-apcs-hmss-global
             - qcom,sdm845-apss-shared
-            - qcom,sm4250-apcs-hmss-global
-            - qcom,sm6115-apcs-hmss-global
-            - qcom,sm6125-apcs-hmss-global
     then:
       properties:
         clocks: false
@@ -192,7 +215,8 @@
     #define GCC_APSS_AHB_CLK_SRC  1
     #define GCC_GPLL0_AO_OUT_MAIN 123
     apcs: mailbox@b011000 {
-        compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+        compatible = "qcom,qcs404-apcs-apps-global",
+                     "qcom,msm8916-apcs-kpss-global", "syscon";
         reg = <0x0b011000 0x1000>;
         #mbox-cells = <1>;
         clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;

diff --git a/Bindings/mailbox/qcom-ipcc.yaml b/Bindings/mailbox/qcom-ipcc.yaml
index a35f948..8f00486 100644
--- a/Bindings/mailbox/qcom-ipcc.yaml
+++ b/Bindings/mailbox/qcom-ipcc.yaml

@@ -35,6 +35,7 @@
           - qcom,sm8450-ipcc
           - qcom,sm8550-ipcc
           - qcom,sm8650-ipcc
+          - qcom,x1e80100-ipcc
       - const: qcom,ipcc
 
   reg:

diff --git a/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
index 8b15a05..fe83b5c 100644
--- a/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
+++ b/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml

@@ -37,7 +37,9 @@
 
 properties:
   compatible:
-    const: xlnx,zynqmp-ipi-mailbox
+    enum:
+      - xlnx,zynqmp-ipi-mailbox
+      - xlnx,versal-ipi-mailbox
 
   method:
     description: |
@@ -58,6 +60,12 @@
   '#size-cells':
     const: 2
 
+  reg:
+    maxItems: 2
+
+  reg-names:
+    maxItems: 2
+
   xlnx,ipi-id:
     description: |
       Remote Xilinx IPI agent ID of which the mailbox is connected to.
@@ -76,7 +84,17 @@
     properties:
 
       compatible:
-        const: xlnx,zynqmp-ipi-dest-mailbox
+        enum:
+          - xlnx,zynqmp-ipi-dest-mailbox
+          - xlnx,versal-ipi-dest-mailbox
+
+      reg:
+        minItems: 1
+        maxItems: 4
+
+      reg-names:
+        minItems: 1
+        maxItems: 4
 
       xlnx,ipi-id:
         description:
@@ -88,23 +106,44 @@
         description:
           It contains tx(0) or rx(1) channel IPI id number.
 
-      reg:
-        maxItems: 4
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - xlnx,zynqmp-ipi-dest-mailbox
+        then:
+          properties:
+            reg:
+              maxItems: 4
 
-      reg-names:
-        items:
-          - const: local_request_region
-          - const: local_response_region
-          - const: remote_request_region
-          - const: remote_response_region
+            reg-names:
+              items:
+                - const: local_request_region
+                - const: local_response_region
+                - const: remote_request_region
+                - const: remote_response_region
+        else:
+          properties:
+            reg:
+              minItems: 1
+              items:
+                - description: Remote IPI agent control register region
+                - description: Remote IPI agent optional message buffers
+
+            reg-names:
+              minItems: 1
+              items:
+                - const: ctrl
+                - const: msg
 
     required:
       - compatible
       - reg
       - reg-names
       - "#mbox-cells"
-
-additionalProperties: false
+      - xlnx,ipi-id
 
 required:
   - compatible
@@ -113,6 +152,36 @@
   - '#size-cells'
   - xlnx,ipi-id
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-ipi-mailbox
+    then:
+      properties:
+        reg: false
+        reg-names: false
+
+    else:
+      properties:
+        reg:
+          items:
+            - description: Host IPI agent control register region
+            - description: Host IPI agent optional message buffers
+
+        reg-names:
+          items:
+            - const: ctrl
+            - const: msg
+
+      required:
+        - reg
+        - reg-names
+
+additionalProperties: false
+
 examples:
   - |
     #include<dt-bindings/interrupt-controller/arm-gic.h>
@@ -144,4 +213,41 @@
       };
     };
 
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      mailbox@ff300000 {
+        compatible = "xlnx,versal-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        reg = <0x0 0xff300000 0x0 0x1000>,
+              <0x0 0xff990000 0x0 0x1ff>;
+        reg-names = "ctrl", "msg";
+        xlnx,ipi-id = <0>;
+        ranges;
+
+        /* buffered IPI */
+        mailbox@ff340000 {
+          compatible = "xlnx,versal-ipi-dest-mailbox";
+          reg = <0x0 0xff340000 0x0 0x1000>,
+                <0x0 0xff990400 0x0 0x1ff>;
+          reg-names = "ctrl", "msg";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+
+        /* bufferless IPI */
+        mailbox@ff370000 {
+          compatible = "xlnx,versal-ipi-dest-mailbox";
+          reg = <0x0 0xff370000 0x0 0x1000>;
+          reg-names = "ctrl";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <7>;
+        };
+      };
+    };
 ...

diff --git a/Bindings/media/cnm,wave521c.yaml b/Bindings/media/cnm,wave521c.yaml
new file mode 100644
index 0000000..6a11c1d
--- /dev/null
+++ b/Bindings/media/cnm,wave521c.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cnm,wave521c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Wave 5 Series multi-standard codec IP
+
+maintainers:
+  - Nas Chung <nas.chung@chipsnmedia.com>
+  - Jackson Lee <jackson.lee@chipsnmedia.com>
+
+description:
+  The Chips&Media WAVE codec IP is a multi format video encoder/decoder
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,j721s2-wave521c
+      - const: cnm,wave521c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VCODEC clock
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The VPU uses the SRAM to store some of the reference data instead of
+      storing it on DMA memory. It is mainly used for the purpose of reducing
+      bandwidth.
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    vpu: video-codec@12345678 {
+        compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+        reg = <0x12345678 0x1000>;
+        clocks = <&clks 42>;
+        interrupts = <42>;
+        sram = <&sram>;
+    };

diff --git a/Bindings/media/i2c/alliedvision,alvium-csi2.yaml b/Bindings/media/i2c/alliedvision,alvium-csi2.yaml
new file mode 100644
index 0000000..d3329e9
--- /dev/null
+++ b/Bindings/media/i2c/alliedvision,alvium-csi2.yaml

@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allied Vision Alvium Camera
+
+maintainers:
+  - Tommaso Merciai <tomm.merciai@gmail.com>
+  - Martin Hecht <martin.hecht@avnet.eu>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: alliedvision,alvium-csi2
+
+  reg:
+    maxItems: 1
+
+  vcc-ext-in-supply:
+    description: |
+      The regulator that supplies power to the VCC_EXT_IN pins.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - vcc-ext-in-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        alvium: camera@3c {
+            compatible = "alliedvision,alvium-csi2";
+            reg = <0x3c>;
+            vcc-ext-in-supply = <&reg_vcc_ext_in>;
+
+            port {
+                alvium_out: endpoint {
+                    remote-endpoint = <&mipi_csi_0_in>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <681250000>;
+                };
+            };
+        };
+    };
+
+...

diff --git a/Bindings/media/i2c/asahi-kasei,ak7375.yaml b/Bindings/media/i2c/asahi-kasei,ak7375.yaml
index 22a810f..fe312cc 100644
--- a/Bindings/media/i2c/asahi-kasei,ak7375.yaml
+++ b/Bindings/media/i2c/asahi-kasei,ak7375.yaml

@@ -15,7 +15,9 @@
 
 properties:
   compatible:
-    const: asahi-kasei,ak7375
+    enum:
+      - asahi-kasei,ak7345
+      - asahi-kasei,ak7375
 
   reg:
     maxItems: 1

diff --git a/Bindings/media/i2c/galaxycore,gc0308.yaml b/Bindings/media/i2c/galaxycore,gc0308.yaml
new file mode 100644
index 0000000..f81e7da
--- /dev/null
+++ b/Bindings/media/i2c/galaxycore,gc0308.yaml

@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc0308.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxycore GC0308 and GC0309 Image Sensors
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The GalaxyCore GC0308 (1/6.5") and GC0309 (1/9") are 640x480 VGA sensors
+  programmable through an I2C interface and connected via parallel bus.
+  They include an ISP capable of auto exposure and auto white balance.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: galaxycore,gc0308
+      - items:
+          - const: galaxycore,gc0309
+          - const: galaxycore,gc0308
+
+  reg:
+    const: 0x21
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO descriptor for the reset pin.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO descriptor for the powerdown pin.
+    maxItems: 1
+
+  vdd28-supply:
+    description: 2.8V supply
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-width: true
+          data-shift: true
+          hsync-active: true
+          vsync-active: true
+          data-active: true
+          pclk-sample: true
+
+        required:
+          - bus-width
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@21 {
+            compatible = "galaxycore,gc0308";
+            reg = <0x21>;
+            clocks = <&camera_clk>;
+            powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+            vdd28-supply = <&vdd28>;
+
+            port {
+                gc0308_ep: endpoint {
+                    remote-endpoint = <&parallel_from_gc0308>;
+                    bus-width = <8>;
+                    data-shift = <2>; /* lines 9:2 are used */
+                    hsync-active = <1>; /* active high */
+                    vsync-active = <1>; /* active high */
+                    data-active = <1>; /* active high */
+                    pclk-sample = <1>; /* sample on rising edge */
+                };
+            };
+        };
+    };
+
+...

diff --git a/Bindings/media/i2c/galaxycore,gc2145.yaml b/Bindings/media/i2c/galaxycore,gc2145.yaml
new file mode 100644
index 0000000..1726ecc
--- /dev/null
+++ b/Bindings/media/i2c/galaxycore,gc2145.yaml

@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+description:
+  The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile
+  phone camera applications and digital camera products. GC2145 incorporates a
+  1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+  processor allowing AE/AWB/interpolation/de-noise/color-conversion and
+  gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the
+  sensor. It is programmable through an I2C interface. Image data is sent
+  either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: galaxycore,gc2145
+
+  reg:
+    const: 0x3c
+
+  clocks:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  iovdd-supply:
+    description: Power Supply for I/O circuits (1.7 - 3V).
+
+  avdd-supply:
+    description: Power for analog circuit/sensor array (2.7 - 3V).
+
+  dvdd-supply:
+    description: Power for digital core (1.7 - 1.9V).
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - reset-gpios
+  - iovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "galaxycore,gc2145";
+            reg = <0x3c>;
+            clocks = <&clk_ext_camera>;
+            iovdd-supply = <&scmi_v3v3_sw>;
+            avdd-supply = <&scmi_v3v3_sw>;
+            dvdd-supply = <&scmi_v3v3_sw>;
+            powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+            reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mipid02_0>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+                };
+            };
+        };
+    };
+
+...

diff --git a/Bindings/media/i2c/ov8856.yaml b/Bindings/media/i2c/ov8856.yaml
index 57f5e48..816dac9 100644
--- a/Bindings/media/i2c/ov8856.yaml
+++ b/Bindings/media/i2c/ov8856.yaml

@@ -67,19 +67,17 @@
 
         properties:
           data-lanes:
-            description: |-
-              The driver only supports four-lane operation.
-            items:
-              - const: 1
-              - const: 2
-              - const: 3
-              - const: 4
-
-          link-frequencies:
-            description: Frequencies listed are driver, not h/w limitations.
-            maxItems: 2
-            items:
-              enum: [ 360000000, 180000000 ]
+            oneOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
         required:
           - link-frequencies

diff --git a/Bindings/media/i2c/ovti,ov64a40.yaml b/Bindings/media/i2c/ovti,ov64a40.yaml
new file mode 100644
index 0000000..2b6143a
--- /dev/null
+++ b/Bindings/media/i2c/ovti,ov64a40.yaml

@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV64A40 Image Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov64a40
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.1 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum:
+              - 1 # MIPI CSI-2 C-PHY
+              - 4 # MIPI CSI-2 D-PHY
+          data-lanes: true
+          link-frequencies: true
+          clock-noncontinuous: true
+          remote-endpoint: true
+
+        required:
+          - bus-type
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@36 {
+              compatible = "ovti,ov64a40";
+              reg = <0x36>;
+              clocks = <&camera_clk>;
+              dovdd-supply = <&vgen4_reg>;
+              avdd-supply = <&vgen3_reg>;
+              dvdd-supply = <&vgen2_reg>;
+              powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+              rotation = <180>;
+              orientation = <2>;
+
+              port {
+                  endpoint {
+                      remote-endpoint = <&mipi_csi2_in>;
+                      bus-type = <4>;
+                      data-lanes = <1 2 3 4>;
+                      link-frequencies = /bits/ 64 <456000000>;
+                  };
+              };
+          };
+      };
+
+...

diff --git a/Bindings/media/i2c/sony,imx335.yaml b/Bindings/media/i2c/sony,imx335.yaml
index a167dcd..106c36e 100644
--- a/Bindings/media/i2c/sony,imx335.yaml
+++ b/Bindings/media/i2c/sony,imx335.yaml

@@ -32,6 +32,15 @@
     description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
     maxItems: 1
 
+  avdd-supply:
+    description: Analog power supply (2.9V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
@@ -79,6 +88,10 @@
             assigned-clock-parents = <&imx335_clk_parent>;
             assigned-clock-rates = <24000000>;
 
+            avdd-supply = <&camera_vdda_2v9>;
+            ovdd-supply = <&camera_vddo_1v8>;
+            dvdd-supply = <&camera_vddd_1v2>;
+
             port {
                 imx335: endpoint {
                     remote-endpoint = <&cam>;

diff --git a/Bindings/media/i2c/techwell,tw9900.yaml b/Bindings/media/i2c/techwell,tw9900.yaml
new file mode 100644
index 0000000..e37317f
--- /dev/null
+++ b/Bindings/media/i2c/techwell,tw9900.yaml

@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Techwell TW9900 NTSC/PAL video decoder
+
+maintainers:
+  - Mehdi Djait <mehdi.djait@bootlin.com>
+
+description:
+  The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards
+  with auto-detection features.
+
+properties:
+  compatible:
+    const: techwell,tw9900
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD power supply
+
+  reset-gpios:
+    description: GPIO descriptor for the RESET input pin
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO descriptor for the POWERDOWN input pin
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Analog input port
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: CVBS over MUX0
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: CVBS over MUX1
+
+          endpoint@2:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Chroma over CIN0 and Y over MUX0
+
+          endpoint@3:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Chroma over CIN0 and Y over MUX1
+
+        oneOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+          - required:
+              - endpoint@2
+          - required:
+              - endpoint@3
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for the decoder output.
+
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/sdtv-standards.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    composite_connector {
+        compatible = "composite-video-connector";
+        label = "tv";
+        sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>;
+
+        port {
+            composite_to_tw9900: endpoint {
+                remote-endpoint = <&tw9900_to_composite>;
+            };
+        };
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-decoder@44 {
+            compatible = "techwell,tw9900";
+            reg = <0x44>;
+
+            vdd-supply = <&tw9900_supply>;
+            reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    reg = <0>;
+                    tw9900_to_composite: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&composite_to_tw9900>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&cif_in>;
+                    };
+                };
+            };
+        };
+    };

diff --git a/Bindings/media/i2c/thine,thp7312.yaml b/Bindings/media/i2c/thine,thp7312.yaml
new file mode 100644
index 0000000..1978fbb
--- /dev/null
+++ b/Bindings/media/i2c/thine,thp7312.yaml

@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Ideas on Board
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: THine THP7312
+
+maintainers:
+  - Paul Elder <paul.elder@@ideasonboard.com>
+
+description:
+  The THP7312 is a standalone ISP controlled over i2c, and is capable of
+  various image processing and correction functions, including 3A control. It
+  can be connected to CMOS image sensors from various vendors, supporting both
+  MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
+  or parallel. The hardware is capable of transmitting and receiving MIPI
+  interlaved data strams with data types or multiple virtual channel
+  identifiers.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: thine,thp7312
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: CLKI clock input
+
+  thine,boot-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    default: 1
+    description:
+      Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap.
+      0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from
+      external flash ROM).
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESET_N pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  vddcore-supply:
+    description:
+      1.2V supply for core, PLL, MIPI rx and MIPI tx.
+
+  vhtermrx-supply:
+    description:
+      Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddtx-supply:
+    description:
+      Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddhost-supply:
+    description:
+      Supply for host interface. 1.8V, 2.8V, or 3.3V.
+
+  vddcmos-supply:
+    description:
+      Supply for sensor interface. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-0-supply:
+    description:
+      Supply for GPIO_0. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-1-supply:
+    description:
+      Supply for GPIO_1. 1.8V, 2.8V, or 3.3V.
+
+  orientation: true
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4 # CSI-2 D-PHY
+
+          data-lanes:
+            description:
+              This property is for lane reordering between the THP7312 and the
+              SoC. The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed. For
+              two-lane operation the property must be set to <1 2>.
+            minItems: 2
+            maxItems: 4
+            items:
+              maximum: 4
+
+  sensors:
+    type: object
+    description: List of connected sensors
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^sensor@[01]$":
+        type: object
+        description:
+          Sensors connected to the first and second input, with one node per
+          sensor.
+
+        properties:
+          thine,model:
+            $ref: /schemas/types.yaml#/definitions/string
+            description:
+              Model of the connected sensors. Must be a valid compatible string.
+
+          reg:
+            description: THP7312 input port number
+            items:
+              - maximum: 1
+
+          data-lanes:
+            $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes
+            items:
+              maxItems: 4
+            description:
+              This property is for lane reordering between the THP7312 and the imaging
+              sensor that it is connected to.
+
+        required:
+          - reg
+          - data-lanes
+
+        additionalProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - clocks
+  - vddcore-supply
+  - vhtermrx-supply
+  - vddtx-supply
+  - vddhost-supply
+  - vddcmos-supply
+  - vddgpio-0-supply
+  - vddgpio-1-supply
+  - sensors
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@61 {
+            compatible = "thine,thp7312";
+            reg = <0x61>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam1_pins_default>;
+
+            reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>;
+            clocks = <&camera61_clk>;
+
+            vddcore-supply = <&vsys_v4p2>;
+            vhtermrx-supply = <&vsys_v4p2>;
+            vddtx-supply = <&vsys_v4p2>;
+            vddhost-supply = <&vsys_v4p2>;
+            vddcmos-supply = <&vsys_v4p2>;
+            vddgpio-0-supply = <&vsys_v4p2>;
+            vddgpio-1-supply = <&vsys_v4p2>;
+
+            orientation = <0>;
+            rotation = <0>;
+
+            sensors {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@0 {
+                    thine,model = "sony,imx258";
+                    reg = <0>;
+
+                    data-lanes = <4 1 3 2>;
+                };
+            };
+
+            port {
+                thp7312_2_endpoint: endpoint {
+                    remote-endpoint = <&mipi_thp7312_2>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    data-lanes = <4 2 1 3>;
+                };
+            };
+        };
+    };
+...

diff --git a/Bindings/media/mediatek,mdp3-fg.yaml b/Bindings/media/mediatek,mdp3-fg.yaml
new file mode 100644
index 0000000..03f31b0
--- /dev/null
+++ b/Bindings/media/mediatek,mdp3-fg.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Film Grain
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add
+  the film grain according to the AOMedia Video 1 (AV1) standard.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-fg
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14002000 {
+        compatible = "mediatek,mt8195-mdp3-fg";
+        reg = <0x14002000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+    };

diff --git a/Bindings/media/mediatek,mdp3-hdr.yaml b/Bindings/media/mediatek,mdp3-hdr.yaml
new file mode 100644
index 0000000..d4609bb
--- /dev/null
+++ b/Bindings/media/mediatek,mdp3-hdr.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 HDR
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  A Media Data Path 3 (MDP3) component used to perform conversion from
+  High Dynamic Range (HDR) to Standard Dynamic Range (SDR).
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-hdr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14004000 {
+        compatible = "mediatek,mt8195-mdp3-hdr";
+        reg = <0x14004000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+    };

diff --git a/Bindings/media/mediatek,mdp3-rdma.yaml b/Bindings/media/mediatek,mdp3-rdma.yaml
index 7032c7e..59db830 100644
--- a/Bindings/media/mediatek,mdp3-rdma.yaml
+++ b/Bindings/media/mediatek,mdp3-rdma.yaml

@@ -20,8 +20,14 @@
 
 properties:
   compatible:
-    items:
-      - const: mediatek,mt8183-mdp3-rdma
+    oneOf:
+      - enum:
+          - mediatek,mt8183-mdp3-rdma
+          - mediatek,mt8195-mdp3-rdma
+          - mediatek,mt8195-vdo1-rdma
+      - items:
+          - const: mediatek,mt8188-vdo1-rdma
+          - const: mediatek,mt8195-vdo1-rdma
 
   reg:
     maxItems: 1
@@ -45,6 +51,14 @@
       include/dt-bindings/gce/<chip>-gce.h of each chips.
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the System Control Processor (SCP) used for initializing
+      and stopping the MDP3, for sending frame data locations to the MDP3's
+      VPU and to install Inter-Processor Interrupt handlers to control
+      processing states.
+
   power-domains:
     maxItems: 1
 
@@ -52,6 +66,7 @@
     items:
       - description: RDMA clock
       - description: RSZ clock
+    minItems: 1
 
   iommus:
     maxItems: 1
@@ -60,16 +75,72 @@
     items:
       - description: used for 1st data pipe from RDMA
       - description: used for 2nd data pipe from RDMA
+      - description: used for 3rd data pipe from RDMA
+      - description: used for 4th data pipe from RDMA
+      - description: used for the data pipe from SPLIT
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
 
 required:
   - compatible
   - reg
   - mediatek,gce-client-reg
-  - mediatek,gce-events
   - power-domains
   - clocks
   - iommus
-  - mboxes
+  - '#dma-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mdp3-rdma
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        mboxes:
+          minItems: 2
+
+      required:
+        - mboxes
+        - mediatek,gce-events
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-mdp3-rdma
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        mboxes:
+          minItems: 5
+
+      required:
+        - mediatek,gce-events
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-vdo1-rdma
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
 
 additionalProperties: false
 
@@ -80,16 +151,17 @@
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_rdma0: mdp3-rdma0@14001000 {
-      compatible = "mediatek,mt8183-mdp3-rdma";
-      reg = <0x14001000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
-                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-               <&mmsys CLK_MM_MDP_RSZ1>;
-      iommus = <&iommu>;
-      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
-               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
     };

diff --git a/Bindings/media/mediatek,mdp3-rsz.yaml b/Bindings/media/mediatek,mdp3-rsz.yaml
index 78f9de6..f5676be 100644
--- a/Bindings/media/mediatek,mdp3-rsz.yaml
+++ b/Bindings/media/mediatek,mdp3-rsz.yaml

@@ -15,9 +15,13 @@
 
 properties:
   compatible:
-    items:
+    oneOf:
       - enum:
           - mediatek,mt8183-mdp3-rsz
+      - items:
+          - enum:
+              - mediatek,mt8195-mdp3-rsz
+          - const: mediatek,mt8183-mdp3-rsz
 
   reg:
     maxItems: 1

diff --git a/Bindings/media/mediatek,mdp3-stitch.yaml b/Bindings/media/mediatek,mdp3-stitch.yaml
new file mode 100644
index 0000000..d815bea
--- /dev/null
+++ b/Bindings/media/mediatek,mdp3-stitch.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 STITCH
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  One of Media Data Path 3 (MDP3) components used to combine multiple video frame
+  with overlapping fields of view to produce a segmented panorame.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-stitch
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14003000 {
+        compatible = "mediatek,mt8195-mdp3-stitch";
+        reg = <0x14003000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_STITCH>;
+    };

diff --git a/Bindings/media/mediatek,mdp3-tcc.yaml b/Bindings/media/mediatek,mdp3-tcc.yaml
new file mode 100644
index 0000000..14ea556
--- /dev/null
+++ b/Bindings/media/mediatek,mdp3-tcc.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Tone Curve Conversion
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components.
+  It is used to handle the tone mapping of various gamma curves in order to
+  achieve HDR10 effects. This helps adapt the content to the color and
+  brightness range that standard display devices typically support.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-tcc
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@1400b000 {
+        compatible = "mediatek,mt8195-mdp3-tcc";
+        reg = <0x1400b000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+    };

diff --git a/Bindings/media/mediatek,mdp3-tdshp.yaml b/Bindings/media/mediatek,mdp3-tdshp.yaml
new file mode 100644
index 0000000..8ab7f2d
--- /dev/null
+++ b/Bindings/media/mediatek,mdp3-tdshp.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Two-Dimensional Sharpness
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component
+  used to perform image edge sharpening and enhance vividness and contrast.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-mdp3-tdshp
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14007000 {
+        compatible = "mediatek,mt8195-mdp3-tdshp";
+        reg = <0x14007000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+    };

diff --git a/Bindings/media/mediatek,mdp3-wrot.yaml b/Bindings/media/mediatek,mdp3-wrot.yaml
index 0baa771..53a6793 100644
--- a/Bindings/media/mediatek,mdp3-wrot.yaml
+++ b/Bindings/media/mediatek,mdp3-wrot.yaml

@@ -15,9 +15,13 @@
 
 properties:
   compatible:
-    items:
+    oneOf:
       - enum:
           - mediatek,mt8183-mdp3-wrot
+      - items:
+          - enum:
+              - mediatek,mt8195-mdp3-wrot
+          - const: mediatek,mt8183-mdp3-wrot
 
   reg:
     maxItems: 1
@@ -50,6 +54,9 @@
   iommus:
     maxItems: 1
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +65,7 @@
   - power-domains
   - clocks
   - iommus
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -68,13 +76,14 @@
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_wrot0: mdp3-wrot0@14005000 {
-      compatible = "mediatek,mt8183-mdp3-wrot";
-      reg = <0x14005000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
-                            <CMDQ_EVENT_MDP_WROT0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_WROT0>;
-      iommus = <&iommu>;
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
     };

diff --git a/Bindings/media/rockchip-isp1.yaml b/Bindings/media/rockchip-isp1.yaml
index e466dff..afcaa427 100644
--- a/Bindings/media/rockchip-isp1.yaml
+++ b/Bindings/media/rockchip-isp1.yaml

@@ -90,15 +90,16 @@
         description: connection point for input on the parallel interface
 
         properties:
-          bus-type:
-            enum: [5, 6]
-
           endpoint:
             $ref: video-interfaces.yaml#
             unevaluatedProperties: false
 
-        required:
-          - bus-type
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
 
     anyOf:
       - required:

diff --git a/Bindings/media/samsung,s5p-mfc.yaml b/Bindings/media/samsung,s5p-mfc.yaml
index 084b445..b46cc78 100644
--- a/Bindings/media/samsung,s5p-mfc.yaml
+++ b/Bindings/media/samsung,s5p-mfc.yaml

@@ -24,6 +24,7 @@
           - samsung,mfc-v7                # Exynos5420
           - samsung,mfc-v8                # Exynos5800
           - samsung,mfc-v10               # Exynos7880
+          - tesla,fsd-mfc                 # Tesla FSD
       - items:
           - enum:
               - samsung,exynos3250-mfc    # Exynos3250
@@ -49,7 +50,9 @@
 
   iommu-names:
     minItems: 1
-    maxItems: 2
+    items:
+      - const: left
+      - const: right
 
   power-domains:
     maxItems: 1
@@ -84,7 +87,7 @@
             - const: sclk_mfc
         iommus:
           maxItems: 1
-        iommus-names: false
+        iommu-names: false
 
   - if:
       properties:
@@ -102,11 +105,9 @@
             - const: aclk
             - const: aclk_xiu
         iommus:
-          maxItems: 2
-        iommus-names:
-          items:
-            - const: left
-            - const: right
+          minItems: 2
+        iommu-names:
+          minItems: 2
 
   - if:
       properties:
@@ -123,11 +124,9 @@
             - const: mfc
             - const: sclk_mfc
         iommus:
-          maxItems: 2
-        iommus-names:
-          items:
-            - const: left
-            - const: right
+          minItems: 2
+        iommu-names:
+          minItems: 2
 
   - if:
       properties:
@@ -144,11 +143,9 @@
           items:
             - const: mfc
         iommus:
-          maxItems: 2
-        iommus-names:
-          items:
-            - const: left
-            - const: right
+          minItems: 2
+        iommu-names:
+          minItems: 2
 
   - if:
       properties:
@@ -161,9 +158,23 @@
         clocks:
           minItems: 1
           maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - tesla,fsd-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: mfc
         iommus:
-          minItems: 1
           maxItems: 2
+        iommus-names: false
 
 examples:
   - |

diff --git a/Bindings/media/st,stm32-dcmipp.yaml b/Bindings/media/st,stm32-dcmipp.yaml
new file mode 100644
index 0000000..87731f3
--- /dev/null
+++ b/Bindings/media/st,stm32-dcmipp.yaml

@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp13-dcmipp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      DCMIPP supports a single port node with parallel bus.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+            default: 5
+
+          bus-width:
+            enum: [8, 10, 12, 14]
+            default: 8
+
+          pclk-sample: true
+          hsync-active: true
+          vsync-active: true
+
+        required:
+          - pclk-sample
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp13-clks.h>
+    #include <dt-bindings/reset/stm32mp13-resets.h>
+    dcmipp@5a000000 {
+        compatible = "st,stm32mp13-dcmipp";
+        reg = <0x5a000000 0x400>;
+        interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rcc DCMIPP_R>;
+        clocks = <&rcc DCMIPP_K>;
+
+        port {
+             endpoint {
+                   remote-endpoint = <&mipid02_2>;
+                   bus-width = <8>;
+                   hsync-active = <0>;
+                   vsync-active = <0>;
+                   pclk-sample = <0>;
+             };
+        };
+    };
+
+...

diff --git a/Bindings/media/starfive,jh7110-camss.yaml b/Bindings/media/starfive,jh7110-camss.yaml
new file mode 100644
index 0000000..c66586d
--- /dev/null
+++ b/Bindings/media/starfive,jh7110-camss.yaml

@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive SoC CAMSS ISP
+
+maintainers:
+  - Jack Zhu <jack.zhu@starfivetech.com>
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+description:
+  The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
+  consists of a VIN controller (Video In Controller, a top-level control unit)
+  and an ISP.
+
+properties:
+  compatible:
+    const: starfive,jh7110-camss
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: syscon
+      - const: isp
+
+  clocks:
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: apb_func
+      - const: wrapper_clk_c
+      - const: dvp_inv
+      - const: axiwr
+      - const: mipi_rx0_pxl
+      - const: ispcore_2x
+      - const: isp_axi
+
+  resets:
+    maxItems: 6
+
+  reset-names:
+    items:
+      - const: wrapper_p
+      - const: wrapper_c
+      - const: axird
+      - const: axiwr
+      - const: isp_top_n
+      - const: isp_top_axi
+
+  power-domains:
+    items:
+      - description: JH7110 ISP Power Domain Switch Controller.
+
+  interrupts:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input port for receiving DVP data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+              bus-width:
+                enum: [8, 10, 12]
+
+              data-shift:
+                enum: [0, 2]
+                default: 0
+
+              hsync-active:
+                enum: [0, 1]
+                default: 1
+
+              vsync-active:
+                enum: [0, 1]
+                default: 1
+
+            required:
+              - bus-type
+              - bus-width
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port for receiving CSI data.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    isp@19840000 {
+        compatible = "starfive,jh7110-camss";
+        reg = <0x19840000 0x10000>,
+              <0x19870000 0x30000>;
+        reg-names = "syscon", "isp";
+        clocks = <&ispcrg 0>,
+                 <&ispcrg 13>,
+                 <&ispcrg 2>,
+                 <&ispcrg 12>,
+                 <&ispcrg 1>,
+                 <&syscrg 51>,
+                 <&syscrg 52>;
+        clock-names = "apb_func",
+                      "wrapper_clk_c",
+                      "dvp_inv",
+                      "axiwr",
+                      "mipi_rx0_pxl",
+                      "ispcore_2x",
+                      "isp_axi";
+        resets = <&ispcrg 0>,
+                 <&ispcrg 1>,
+                 <&ispcrg 10>,
+                 <&ispcrg 11>,
+                 <&syscrg 41>,
+                 <&syscrg 42>;
+        reset-names = "wrapper_p",
+                      "wrapper_c",
+                      "axird",
+                      "axiwr",
+                      "isp_top_n",
+                      "isp_top_axi";
+        power-domains = <&pwrc 5>;
+        interrupts = <92>, <87>, <88>, <90>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                vin_from_sc2235: endpoint {
+                    remote-endpoint = <&sc2235_to_vin>;
+                    bus-type = <5>;
+                    bus-width = <8>;
+                    data-shift = <2>;
+                    hsync-active = <1>;
+                    vsync-active = <0>;
+                    pclk-sample = <1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                vin_from_csi2rx: endpoint {
+                    remote-endpoint = <&csi2rx_to_vin>;
+                };
+            };
+        };
+    };

diff --git a/Bindings/mfd/ams,as3711.yaml b/Bindings/mfd/ams,as3711.yaml
new file mode 100644
index 0000000..ad8649c
--- /dev/null
+++ b/Bindings/mfd/ams,as3711.yaml

@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger
+
+maintainers:
+  - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
+
+description:
+  AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO
+  power supplies, a battery charger and an RTC.  So far only bindings for the
+  two step-up DC/DC converters are defined.
+
+properties:
+  compatible:
+    const: ams,as3711
+
+  reg:
+    maxItems: 1
+
+  backlight:
+    description:
+      Step-up converter configuration, to be used as a backlight source
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: ams,as3711-bl
+
+      su1-dev:
+        description: Framebuffer phandle for the first step-up converter
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      su1-max-uA:
+        description: Maximum current for the first step-up converter
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      su2-dev:
+        description: Framebuffer phandle for the second step-up converter
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      su2-max-uA:
+        description: Maximum current for the second step-up converter
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      su2-feedback-voltage:
+        description: Second step-up converter uses voltage feedback
+        type: boolean
+
+      su2-feedback-curr1:
+        description:
+          Second step-up converter uses CURR1 input for current feedback
+        type: boolean
+
+      su2-feedback-curr2:
+        description:
+          Second step-up converter uses CURR2 input for current feedback
+        type: boolean
+
+      su2-feedback-curr3:
+        description:
+          Second step-up converter uses CURR3 input for current feedback
+        type: boolean
+
+      su2-feedback-curr-auto:
+        description:
+          Second step-up converter uses automatic current feedback selection
+        type: boolean
+
+      su2-fbprot-lx-sd4:
+        description:
+          Second step-up converter uses LX_SD4 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio2:
+        description:
+          Second step-up converter uses GPIO2 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio3:
+        description:
+          Second step-up converter uses GPIO3 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio4:
+        description:
+          Second step-up converter uses GPIO4 for over-voltage protection
+        type: boolean
+
+      su2-auto-curr1:
+        description:
+          Second step-up converter uses CURR1 input for automatic current
+          feedback
+        type: boolean
+
+      su2-auto-curr2:
+        description:
+          Second step-up converter uses CURR2 input for automatic current
+          feedback
+        type: boolean
+
+      su2-auto-curr3:
+        description:
+          Second step-up converter uses CURR3 input for automatic current
+          feedback
+        type: boolean
+
+    required:
+      - compatible
+
+    dependentRequired:
+      # To use the SU1 converter as a backlight source the following two
+      # properties must be provided:
+      su1-dev: [ su1-max-uA ]
+      su1-max-uA: [ su1-dev ]
+
+      # To use the SU2 converter as a backlight source the following two
+      # properties must be provided:
+      su2-dev: [ su2-max-uA ]
+      su2-max-uA: [ su2-dev ]
+
+      su2-feedback-voltage: [ su2-dev ]
+      su2-feedback-curr1: [ su2-dev ]
+      su2-feedback-curr2: [ su2-dev ]
+      su2-feedback-curr3: [ su2-dev ]
+      su2-feedback-curr-auto: [ su2-dev ]
+      su2-fbprot-lx-sd4: [ su2-dev ]
+      su2-fbprot-gpio2: [ su2-dev ]
+      su2-fbprot-gpio3: [ su2-dev ]
+      su2-fbprot-gpio4: [ su2-dev ]
+      su2-auto-curr1: [ su2-feedback-curr-auto ]
+      su2-auto-curr2: [ su2-feedback-curr-auto ]
+      su2-auto-curr3: [ su2-feedback-curr-auto ]
+
+    dependentSchemas:
+      su2-dev:
+        allOf:
+          - oneOf:
+              - required:
+                  - su2-feedback-voltage
+              - required:
+                  - su2-feedback-curr1
+              - required:
+                  - su2-feedback-curr2
+              - required:
+                  - su2-feedback-curr3
+              - required:
+                  - su2-feedback-curr-auto
+          - oneOf:
+              - required:
+                  - su2-fbprot-lx-sd4
+              - required:
+                  - su2-fbprot-gpio2
+              - required:
+                  - su2-fbprot-gpio3
+              - required:
+                  - su2-fbprot-gpio4
+
+      su2-feedback-curr-auto:
+        anyOf:
+          - required:
+              - su2-auto-curr1
+          - required:
+              - su2-auto-curr2
+          - required:
+              - su2-auto-curr3
+
+  regulators:
+    description: Other DC/DC and LDO supplies
+    type: object
+    unevaluatedProperties: false
+    patternProperties:
+      "^(sd[1-4]|ldo[1-8])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@40 {
+            compatible = "ams,as3711";
+            reg = <0x40>;
+
+            regulators {
+                sd4 {
+                    regulator-name = "1.215V";
+                    regulator-min-microvolt = <1215000>;
+                    regulator-max-microvolt = <1235000>;
+                };
+                ldo2 {
+                    regulator-name = "2.8V CPU";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+
+            backlight {
+                compatible = "ams,as3711-bl";
+                su2-dev = <&lcdc>;
+                su2-max-uA = <36000>;
+                su2-feedback-curr-auto;
+                su2-fbprot-gpio4;
+                su2-auto-curr1;
+                su2-auto-curr2;
+                su2-auto-curr3;
+            };
+        };
+    };

diff --git a/Bindings/mfd/as3711.txt b/Bindings/mfd/as3711.txt
deleted file mode 100644
index d98cf18..0000000
--- a/Bindings/mfd/as3711.txt
+++ /dev/null

@@ -1,73 +0,0 @@
-AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
-supplies, a battery charger and an RTC. So far only bindings for the two stepup
-DCDC converters are defined. Other DCDC and LDO supplies are configured, using
-standard regulator properties, they must belong to a sub-node, called
-"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
-configuration should be placed in a subnode, called "backlight."
-
-Compulsory properties:
-- compatible		: must be "ams,as3711"
-- reg			: specifies the I2C address
-
-To use the SU1 converter as a backlight source the following two properties must
-be provided:
-- su1-dev		: framebuffer phandle
-- su1-max-uA		: maximum current
-
-To use the SU2 converter as a backlight source the following two properties must
-be provided:
-- su2-dev		: framebuffer phandle
-- su1-max-uA		: maximum current
-
-Additionally one of these properties must be provided to select the type of
-feedback used:
-- su2-feedback-voltage	: voltage feedback is used
-- su2-feedback-curr1	: CURR1 input used for current feedback
-- su2-feedback-curr2	: CURR2 input used for current feedback
-- su2-feedback-curr3	: CURR3 input used for current feedback
-- su2-feedback-curr-auto: automatic current feedback selection
-
-and one of these to select the over-voltage protection pin
-- su2-fbprot-lx-sd4	: LX_SD4 is used for over-voltage protection
-- su2-fbprot-gpio2	: GPIO2 is used for over-voltage protection
-- su2-fbprot-gpio3	: GPIO3 is used for over-voltage protection
-- su2-fbprot-gpio4	: GPIO4 is used for over-voltage protection
-
-If "su2-feedback-curr-auto" is selected, one or more of the following properties
-have to be specified:
-- su2-auto-curr1	: use CURR1 input for current feedback
-- su2-auto-curr2	: use CURR2 input for current feedback
-- su2-auto-curr3	: use CURR3 input for current feedback
-
-Example:
-
-as3711@40 {
-	compatible = "ams,as3711";
-	reg = <0x40>;
-
-	regulators {
-		sd4 {
-			regulator-name = "1.215V";
-			regulator-min-microvolt = <1215000>;
-			regulator-max-microvolt = <1235000>;
-		};
-		ldo2 {
-			regulator-name = "2.8V CPU";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-
-	backlight {
-		compatible = "ams,as3711-bl";
-		su2-dev = <&lcdc>;
-		su2-max-uA = <36000>;
-		su2-feedback-curr-auto;
-		su2-fbprot-gpio4;
-		su2-auto-curr1;
-		su2-auto-curr2;
-		su2-auto-curr3;
-	};
-};

diff --git a/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
index bdff5b6..6a82435 100644
--- a/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+++ b/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml

@@ -17,7 +17,7 @@
   node.
 
   The SPMI controller part is provided by
-  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+  Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
 
 properties:
   $nodename:
@@ -42,13 +42,6 @@
 
     additionalProperties: false
 
-    properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
     patternProperties:
       '^ldo[0-9]+$':
         type: object
@@ -66,72 +59,75 @@
 
 examples:
   - |
+    #include <dt-bindings/spmi/spmi.h>
 
-    pmic: pmic@0 {
-      compatible = "hisilicon,hi6421v600-spmi";
-      reg = <0 0>;
-
-      #interrupt-cells = <2>;
-      interrupt-controller;
-      interrupt-parent = <&gpio28>;
-      interrupts = <0 0>;
-
-      regulators {
-        #address-cells = <1>;
+    spmi {
+        #address-cells = <2>;
         #size-cells = <0>;
 
-        ldo3: ldo3 {
-          regulator-name = "ldo3";
-          regulator-min-microvolt = <1500000>;
-          regulator-max-microvolt = <2000000>;
-          regulator-boot-on;
-        };
+        pmic@0 {
+            compatible = "hisilicon,hi6421v600-spmi";
+            reg = <0 SPMI_USID>;
 
-        ldo4: ldo4 {
-          regulator-name = "ldo4";
-          regulator-min-microvolt = <1725000>;
-          regulator-max-microvolt = <1900000>;
-          regulator-boot-on;
-        };
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            interrupt-parent = <&gpio28>;
+            interrupts = <0 0>;
 
-        ldo9: ldo9 {
-          regulator-name = "ldo9";
-          regulator-min-microvolt = <1750000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
+            regulators {
+                ldo3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-boot-on;
+                };
 
-        ldo15: ldo15 {
-          regulator-name = "ldo15";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-always-on;
-        };
+                ldo4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <1725000>;
+                    regulator-max-microvolt = <1900000>;
+                    regulator-boot-on;
+                };
 
-        ldo16: ldo16 {
-          regulator-name = "ldo16";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-boot-on;
-        };
+                ldo9 {
+                    regulator-name = "ldo9";
+                    regulator-min-microvolt = <1750000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
 
-        ldo17: ldo17 {
-          regulator-name = "ldo17";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-        };
+                ldo15 {
+                    regulator-name = "ldo15";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-always-on;
+                };
 
-        ldo33: ldo33 {
-          regulator-name = "ldo33";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
+                ldo16 {
+                    regulator-name = "ldo16";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-boot-on;
+                };
 
-        ldo34: ldo34 {
-          regulator-name = "ldo34";
-          regulator-min-microvolt = <2600000>;
-          regulator-max-microvolt = <3300000>;
+                ldo17 {
+                    regulator-name = "ldo17";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo33 {
+                    regulator-name = "ldo33";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+
+                ldo34 {
+                    regulator-name = "ldo34";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
         };
-      };
     };

diff --git a/Bindings/mfd/qcom,pm8008.yaml b/Bindings/mfd/qcom,pm8008.yaml
index 9e4eed3..0c75d8b 100644
--- a/Bindings/mfd/qcom,pm8008.yaml
+++ b/Bindings/mfd/qcom,pm8008.yaml

@@ -99,10 +99,12 @@
   - |
     #include <dt-bindings/mfd/qcom-pm8008.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    qupv3_se13_i2c {
+
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      pm8008i@8 {
+
+      pmic@8 {
         compatible = "qcom,pm8008";
         reg = <0x8>;
         #address-cells = <1>;

diff --git a/Bindings/mfd/qcom,spmi-pmic.yaml b/Bindings/mfd/qcom,spmi-pmic.yaml
index 9fa5686..8103fb6 100644
--- a/Bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Bindings/mfd/qcom,spmi-pmic.yaml

@@ -66,6 +66,7 @@
           - qcom,pm8841
           - qcom,pm8909
           - qcom,pm8916
+          - qcom,pm8937
           - qcom,pm8941
           - qcom,pm8950
           - qcom,pm8953
@@ -134,9 +135,15 @@
     type: object
     $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
 
+  "^battery@[0-9a-f]+$":
+    type: object
+    oneOf:
+      - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml#
+
   "^charger@[0-9a-f]+$":
     type: object
     oneOf:
+      - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml#
       - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
       - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
       - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#

diff --git a/Bindings/mfd/qcom,tcsr.yaml b/Bindings/mfd/qcom,tcsr.yaml
index 33c3d02..798705a 100644
--- a/Bindings/mfd/qcom,tcsr.yaml
+++ b/Bindings/mfd/qcom,tcsr.yaml

@@ -29,6 +29,8 @@
           - qcom,sdx65-tcsr
           - qcom,sm4450-tcsr
           - qcom,sm8150-tcsr
+          - qcom,sm8250-tcsr
+          - qcom,sm8350-tcsr
           - qcom,sm8450-tcsr
           - qcom,tcsr-apq8064
           - qcom,tcsr-apq8084

diff --git a/Bindings/mfd/samsung,exynos5433-lpass.yaml b/Bindings/mfd/samsung,exynos5433-lpass.yaml
index b97b068..f154103 100644
--- a/Bindings/mfd/samsung,exynos5433-lpass.yaml
+++ b/Bindings/mfd/samsung,exynos5433-lpass.yaml

@@ -85,7 +85,7 @@
         };
 
         i2s@11440000 {
-            compatible = "samsung,exynos7-i2s";
+            compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
             reg = <0x11440000 0x100>;
             dmas = <&adma 0>, <&adma 2>;
             dma-names = "tx", "rx";

diff --git a/Bindings/mfd/sprd,ums512-glbreg.yaml b/Bindings/mfd/sprd,ums512-glbreg.yaml
index 996bd4a..a750fa2 100644
--- a/Bindings/mfd/sprd,ums512-glbreg.yaml
+++ b/Bindings/mfd/sprd,ums512-glbreg.yaml

@@ -19,7 +19,9 @@
 properties:
   compatible:
     items:
-      - const: sprd,ums512-glbregs
+      - enum:
+          - sprd,ums512-glbregs
+          - sprd,ums9620-glbregs
       - const: syscon
       - const: simple-mfd
 

diff --git a/Bindings/mfd/ti,am3359-tscadc.yaml b/Bindings/mfd/ti,am3359-tscadc.yaml
index 23a6326..70b5dfc 100644
--- a/Bindings/mfd/ti,am3359-tscadc.yaml
+++ b/Bindings/mfd/ti,am3359-tscadc.yaml

@@ -61,8 +61,6 @@
   - interrupts
   - clocks
   - clock-names
-  - dmas
-  - dma-names
 
 additionalProperties: false
 

diff --git a/Bindings/misc/fsl,dpaa2-console.yaml b/Bindings/misc/fsl,dpaa2-console.yaml
index 8cc951f..59b83ea 100644
--- a/Bindings/misc/fsl,dpaa2-console.yaml
+++ b/Bindings/misc/fsl,dpaa2-console.yaml

@@ -12,7 +12,7 @@
 
 properties:
   compatible:
-    const: "fsl,dpaa2-console"
+    const: fsl,dpaa2-console
 
   reg:
     maxItems: 1

diff --git a/Bindings/mmc/arasan,sdhci.yaml b/Bindings/mmc/arasan,sdhci.yaml
index 3e99801..9075add 100644
--- a/Bindings/mmc/arasan,sdhci.yaml
+++ b/Bindings/mmc/arasan,sdhci.yaml

@@ -226,8 +226,8 @@
           interrupt-parent = <&gic>;
           interrupts = <0 48 4>;
           reg = <0xff160000 0x1000>;
-          clocks = <&clk200>, <&clk200>;
-          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&clk200>, <&clk200>, <&clk1200>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
           clock-output-names = "clk_out_sd0", "clk_in_sd0";
           #clock-cells = <1>;
           clk-phase-sd-hs = <63>, <72>;
@@ -239,8 +239,8 @@
           interrupt-parent = <&gic>;
           interrupts = <0 126 4>;
           reg = <0xf1040000 0x10000>;
-          clocks = <&clk200>, <&clk200>;
-          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&clk200>, <&clk200>, <&clk1200>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
           clock-output-names = "clk_out_sd0", "clk_in_sd0";
           #clock-cells = <1>;
           clk-phase-sd-hs = <132>, <60>;

diff --git a/Bindings/mmc/arm,pl18x.yaml b/Bindings/mmc/arm,pl18x.yaml
index 2459a55..940b126 100644
--- a/Bindings/mmc/arm,pl18x.yaml
+++ b/Bindings/mmc/arm,pl18x.yaml

@@ -203,7 +203,7 @@
       bus-width = <4>;
       cap-sd-highspeed;
       cap-mmc-highspeed;
-      cd-gpios  = <&gpio2 31 0x4>;
+      cd-gpios = <&gpio2 31 0x4>;
       st,sig-dir-dat0;
       st,sig-dir-dat2;
       st,sig-dir-cmd;

diff --git a/Bindings/mmc/brcm,sdhci-brcmstb.yaml b/Bindings/mmc/brcm,sdhci-brcmstb.yaml
index c028039..cbd3d6c 100644
--- a/Bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/Bindings/mmc/brcm,sdhci-brcmstb.yaml

@@ -20,10 +20,8 @@
           - const: brcm,sdhci-brcmstb
       - items:
           - enum:
+              - brcm,bcm74165b0-sdhci
               - brcm,bcm7445-sdhci
-          - const: brcm,sdhci-brcmstb
-      - items:
-          - enum:
               - brcm,bcm7425-sdhci
           - const: brcm,sdhci-brcmstb
 

diff --git a/Bindings/mmc/marvell,xenon-sdhci.yaml b/Bindings/mmc/marvell,xenon-sdhci.yaml
index 3a8e748..cfe6237 100644
--- a/Bindings/mmc/marvell,xenon-sdhci.yaml
+++ b/Bindings/mmc/marvell,xenon-sdhci.yaml

@@ -27,7 +27,9 @@
           - marvell,armada-ap806-sdhci
 
       - items:
-          - const: marvell,armada-ap807-sdhci
+          - enum:
+              - marvell,armada-ap807-sdhci
+              - marvell,ac5-sdhci
           - const: marvell,armada-ap806-sdhci
 
       - items:

diff --git a/Bindings/mmc/mtk-sd.yaml b/Bindings/mmc/mtk-sd.yaml
index 3fffa46..c532ec9 100644
--- a/Bindings/mmc/mtk-sd.yaml
+++ b/Bindings/mmc/mtk-sd.yaml

@@ -145,6 +145,15 @@
     minimum: 0
     maximum: 7
 
+  mediatek,tuning-step:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some SoCs need extend tuning step for better delay value to avoid CRC issue.
+      If not present, default tuning step is 32. For eMMC and SD, this can yield
+      satisfactory calibration results in most cases.
+    enum: [32, 64]
+    default: 32
+
   resets:
     maxItems: 1
 

diff --git a/Bindings/mmc/renesas,sdhi.yaml b/Bindings/mmc/renesas,sdhi.yaml
index 94e2287..f7a4c6b 100644
--- a/Bindings/mmc/renesas,sdhi.yaml
+++ b/Bindings/mmc/renesas,sdhi.yaml

@@ -56,7 +56,7 @@
               - renesas,sdhi-r8a77980  # R-Car V3H
               - renesas,sdhi-r8a77990  # R-Car E3
               - renesas,sdhi-r8a77995  # R-Car D3
-              - renesas,sdhi-r9a07g043 # RZ/G2UL
+              - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five
               - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
               - renesas,sdhi-r9a07g054 # RZ/V2L
               - renesas,sdhi-r9a08g045 # RZ/G3S

diff --git a/Bindings/mmc/samsung,exynos-dw-mshc.yaml b/Bindings/mmc/samsung,exynos-dw-mshc.yaml
index 6ee78a3..5fe6579 100644
--- a/Bindings/mmc/samsung,exynos-dw-mshc.yaml
+++ b/Bindings/mmc/samsung,exynos-dw-mshc.yaml

@@ -14,15 +14,22 @@
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos4210-dw-mshc
-      - samsung,exynos4412-dw-mshc
-      - samsung,exynos5250-dw-mshc
-      - samsung,exynos5420-dw-mshc
-      - samsung,exynos5420-dw-mshc-smu
-      - samsung,exynos7-dw-mshc
-      - samsung,exynos7-dw-mshc-smu
-      - axis,artpec8-dw-mshc
+    oneOf:
+      - enum:
+          - axis,artpec8-dw-mshc
+          - samsung,exynos4210-dw-mshc
+          - samsung,exynos4412-dw-mshc
+          - samsung,exynos5250-dw-mshc
+          - samsung,exynos5420-dw-mshc
+          - samsung,exynos5420-dw-mshc-smu
+          - samsung,exynos7-dw-mshc
+          - samsung,exynos7-dw-mshc-smu
+      - items:
+          - enum:
+              - samsung,exynos5433-dw-mshc-smu
+              - samsung,exynos7885-dw-mshc-smu
+              - samsung,exynos850-dw-mshc-smu
+          - const: samsung,exynos7-dw-mshc-smu
 
   reg:
     maxItems: 1

diff --git a/Bindings/mmc/sdhci-msm.yaml b/Bindings/mmc/sdhci-msm.yaml
index 86fae73..c24c537 100644
--- a/Bindings/mmc/sdhci-msm.yaml
+++ b/Bindings/mmc/sdhci-msm.yaml

@@ -22,6 +22,8 @@
       - items:
           - enum:
               - qcom,apq8084-sdhci
+              - qcom,ipq4019-sdhci
+              - qcom,ipq8074-sdhci
               - qcom,msm8226-sdhci
               - qcom,msm8953-sdhci
               - qcom,msm8974-sdhci

diff --git a/Bindings/mmc/sdhci-pxa.yaml b/Bindings/mmc/sdhci-pxa.yaml
index 09455f9..4869dde 100644
--- a/Bindings/mmc/sdhci-pxa.yaml
+++ b/Bindings/mmc/sdhci-pxa.yaml

@@ -18,7 +18,7 @@
             const: marvell,armada-380-sdhci
     then:
       properties:
-        regs:
+        reg:
           minItems: 3
         reg-names:
           minItems: 3
@@ -26,7 +26,7 @@
         - reg-names
     else:
       properties:
-        regs:
+        reg:
           maxItems: 1
         reg-names:
           maxItems: 1

diff --git a/Bindings/mmc/snps,dwcmshc-sdhci.yaml b/Bindings/mmc/snps,dwcmshc-sdhci.yaml
index a43eb83..42804d9 100644
--- a/Bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Bindings/mmc/snps,dwcmshc-sdhci.yaml

@@ -19,6 +19,7 @@
       - rockchip,rk3568-dwcmshc
       - rockchip,rk3588-dwcmshc
       - snps,dwcmshc-sdhci
+      - thead,th1520-dwcmshc
 
   reg:
     maxItems: 1

diff --git a/Bindings/mmc/synopsys-dw-mshc.yaml b/Bindings/mmc/synopsys-dw-mshc.yaml
index b13b516..a629277 100644
--- a/Bindings/mmc/synopsys-dw-mshc.yaml
+++ b/Bindings/mmc/synopsys-dw-mshc.yaml

@@ -35,6 +35,9 @@
       - const: biu
       - const: ciu
 
+  iommus:
+    maxItems: 1
+
   altr,sysmgr-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
@@ -62,6 +65,7 @@
         altr,sysmgr-syscon: true
     else:
       properties:
+        iommus: false
         altr,sysmgr-syscon: false
 
 required:

diff --git a/Bindings/mtd/partitions/u-boot.yaml b/Bindings/mtd/partitions/u-boot.yaml
index 3c56efe..327fa87 100644
--- a/Bindings/mtd/partitions/u-boot.yaml
+++ b/Bindings/mtd/partitions/u-boot.yaml

@@ -7,7 +7,7 @@
 title: U-Boot bootloader partition
 
 description: |
-  U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+  U-Boot is a bootloader commonly used in embedded devices. It's almost always
   located on some kind of flash device.
 
   Device configuration is stored as a set of environment variables that are

diff --git a/Bindings/net/dsa/dsa.yaml b/Bindings/net/dsa/dsa.yaml
index 6107189..2abd036 100644
--- a/Bindings/net/dsa/dsa.yaml
+++ b/Bindings/net/dsa/dsa.yaml

@@ -46,4 +46,10 @@
             $ref: dsa-port.yaml#
             unevaluatedProperties: false
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
 ...

diff --git a/Bindings/net/dsa/marvell,mv88e6060.yaml b/Bindings/net/dsa/marvell,mv88e6060.yaml
new file mode 100644
index 0000000..4f1adf0
--- /dev/null
+++ b/Bindings/net/dsa/marvell,mv88e6060.yaml

@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6060 DSA switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  The Marvell MV88E6060 switch has been produced and sold by Marvell
+  since at least 2008. The switch has one pin ADDR4 that controls the
+  MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus
+  connected to the switch, the PHYs inside the switch appear as
+  independent devices on address 0x00-0x04 or 0x10-0x14, so in difference
+  from many other DSA switches this switch does not have an internal
+  MDIO bus for the PHY devices.
+
+properties:
+  compatible:
+    const: marvell,mv88e6060
+    description:
+      The MV88E6060 is the oldest Marvell DSA switch product, and
+      as such a bit limited in features compared to later hardware.
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@16 {
+            compatible = "marvell,mv88e6060";
+            reg = <16>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                ethernet-port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                ethernet-port@5 {
+                    reg = <5>;
+                    phy-mode = "rev-mii";
+                    ethernet = <&ethc>;
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };

diff --git a/Bindings/net/dsa/marvell,mv88e6xxx.yaml b/Bindings/net/dsa/marvell,mv88e6xxx.yaml
new file mode 100644
index 0000000..19f15bd
--- /dev/null
+++ b/Bindings/net/dsa/marvell,mv88e6xxx.yaml

@@ -0,0 +1,337 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6xxx DSA switch family
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  The Marvell MV88E6xxx switch series has been produced and sold
+  by Marvell since at least 2008. The switch has a few compatibles which
+  just indicate the base address of the switch, then operating systems
+  can investigate switch ID registers to find out which actual version
+  of the switch it is dealing with.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,mv88e6085
+          - marvell,mv88e6190
+          - marvell,mv88e6250
+        description: |
+          marvell,mv88e6085: This switch uses base address 0x10.
+            This switch and its siblings will be autodetected from
+            ID registers found in the switch, so only "marvell,mv88e6085" should be
+            specified. This includes the following list of MV88Exxxx switches:
+            6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, 6176,
+            6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352
+          marvell,mv88e6190: This switch uses base address 0x00.
+            This switch and its siblings will be autodetected from
+            ID registers found in the switch, so only "marvell,mv88e6190" should be
+            specified. This includes the following list of MV88Exxxx switches:
+            6190, 6190X, 6191, 6290, 6361, 6390, 6390X
+          marvell,mv88e6250: This switch uses base address 0x08 or 0x18.
+            This switch and its siblings will be autodetected from
+            ID registers found in the switch, so only "marvell,mv88e6250" should be
+            specified. This includes the following list of MV88Exxxx switches:
+            6220, 6250
+      - items:
+          - const: marvell,turris-mox-mv88e6085
+          - const: marvell,mv88e6085
+      - items:
+          - const: marvell,turris-mox-mv88e6190
+          - const: marvell,mv88e6190
+
+  reg:
+    maxItems: 1
+
+  eeprom-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Set to the length of an EEPROM connected to the switch. Must be
+      set if the switch can not detect the presence and/or size of a connected
+      EEPROM, otherwise optional.
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+  interrupts:
+    description: The switch provides an external interrupt line, but it is
+      not always used by target systems.
+    maxItems: 1
+
+  interrupt-controller:
+    description: The switch has an internal interrupt controller used by
+      the different sub-blocks.
+
+  '#interrupt-cells':
+    description: The internal interrupt controller only supports triggering
+      on active high level interrupts so the second cell must alway be set to
+      IRQ_TYPE_LEVEL_HIGH.
+    const: 2
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    description: Marvell MV88E6xxx switches have an varying combination of
+      internal and external MDIO buses, in some cases a combined bus that
+      can be used both internally and externally. This node is for the
+      primary bus, used internally and sometimes also externally.
+
+  mdio-external:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    description: Marvell MV88E6xxx switches that have a separate external
+      MDIO bus use this port to access external components on the MDIO bus.
+
+    properties:
+      compatible:
+        const: marvell,mv88e6xxx-mdio-external
+
+    required:
+      - compatible
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@0 {
+            compatible = "marvell,mv88e6085";
+            reg = <0>;
+            reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sw_phy0: ethernet-phy@0 {
+                    reg = <0x0>;
+                };
+
+                sw_phy1: ethernet-phy@1 {
+                    reg = <0x1>;
+                };
+
+                sw_phy2: ethernet-phy@2 {
+                    reg = <0x2>;
+                };
+
+                sw_phy3: ethernet-phy@3 {
+                    reg = <0x3>;
+                };
+            };
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    reg = <0>;
+                    label = "lan4";
+                    phy-handle = <&sw_phy0>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan3";
+                    phy-handle = <&sw_phy1>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-handle = <&sw_phy2>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@3 {
+                    reg = <3>;
+                    label = "lan1";
+                    phy-handle = <&sw_phy3>;
+                    phy-mode = "internal";
+                };
+
+                ethernet-port@5 {
+                    reg = <5>;
+                    ethernet = <&fec>;
+                    phy-mode = "rgmii-id";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@0 {
+            compatible = "marvell,mv88e6190";
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&switch_interrupt_pins>;
+            pinctrl-names = "default";
+            reg = <0>;
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                switch0phy1: ethernet-phy@1 {
+                    reg = <0x1>;
+                };
+
+                switch0phy2: ethernet-phy@2 {
+                    reg = <0x2>;
+                };
+
+                switch0phy3: ethernet-phy@3 {
+                    reg = <0x3>;
+                };
+
+                switch0phy4: ethernet-phy@4 {
+                    reg = <0x4>;
+                };
+
+                switch0phy5: ethernet-phy@5 {
+                    reg = <0x5>;
+                };
+
+                switch0phy6: ethernet-phy@6 {
+                    reg = <0x6>;
+                };
+
+                switch0phy7: ethernet-phy@7 {
+                    reg = <0x7>;
+                };
+
+                switch0phy8: ethernet-phy@8 {
+                    reg = <0x8>;
+                };
+            };
+
+            mdio-external {
+                compatible = "marvell,mv88e6xxx-mdio-external";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                phy1: ethernet-phy@b {
+                    reg = <0xb>;
+                    compatible = "ethernet-phy-ieee802.3-c45";
+                };
+
+                phy2: ethernet-phy@c {
+                    reg = <0xc>;
+                    compatible = "ethernet-phy-ieee802.3-c45";
+                };
+            };
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+                    reg = <0>;
+
+                    fixed-link {
+                        full-duplex;
+                        pause;
+                        speed = <1000>;
+                    };
+                };
+
+                ethernet-port@1 {
+                    label = "lan1";
+                    phy-handle = <&switch0phy1>;
+                    reg = <1>;
+                };
+
+                ethernet-port@2 {
+                    label = "lan2";
+                    phy-handle = <&switch0phy2>;
+                    reg = <2>;
+                };
+
+                ethernet-port@3 {
+                    label = "lan3";
+                    phy-handle = <&switch0phy3>;
+                    reg = <3>;
+                };
+
+                ethernet-port@4 {
+                    label = "lan4";
+                    phy-handle = <&switch0phy4>;
+                    reg = <4>;
+                };
+
+                ethernet-port@5 {
+                    label = "lan5";
+                    phy-handle = <&switch0phy5>;
+                    reg = <5>;
+                };
+
+                ethernet-port@6 {
+                    label = "lan6";
+                    phy-handle = <&switch0phy6>;
+                    reg = <6>;
+                };
+
+                ethernet-port@7 {
+                    label = "lan7";
+                    phy-handle = <&switch0phy7>;
+                    reg = <7>;
+                };
+
+                ethernet-port@8 {
+                    label = "lan8";
+                    phy-handle = <&switch0phy8>;
+                    reg = <8>;
+                };
+
+                ethernet-port@9 {
+                    /* 88X3310P external phy */
+                    label = "lan9";
+                    phy-handle = <&phy1>;
+                    phy-mode = "xaui";
+                    reg = <9>;
+                };
+
+                ethernet-port@a {
+                    /* 88X3310P external phy */
+                    label = "lan10";
+                    phy-handle = <&phy2>;
+                    phy-mode = "xaui";
+                    reg = <0xa>;
+                };
+            };
+        };
+    };

diff --git a/Bindings/net/dsa/marvell.txt b/Bindings/net/dsa/marvell.txt
deleted file mode 100644
index 6ec0c18..0000000
--- a/Bindings/net/dsa/marvell.txt
+++ /dev/null

@@ -1,109 +0,0 @@
-Marvell DSA Switch Device Tree Bindings
----------------------------------------
-
-WARNING: This binding is currently unstable. Do not program it into a
-FLASH never to be changed again. Once this binding is stable, this
-warning will be removed.
-
-If you need a stable binding, use the old dsa.txt binding.
-
-Marvell Switches are MDIO devices. The following properties should be
-placed as a child node of an mdio device.
-
-The properties described here are those specific to Marvell devices.
-Additional required and optional properties can be found in dsa.txt.
-
-The compatibility string is used only to find an identification register,
-which is at a different MDIO base address in different switch families.
-- "marvell,mv88e6085"	: Switch has base address 0x10. Use with models:
-			  6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
-			  6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
-			  6341, 6350, 6351, 6352
-- "marvell,mv88e6190"	: Switch has base address 0x00. Use with models:
-			  6190, 6190X, 6191, 6290, 6361, 6390, 6390X
-- "marvell,mv88e6250"	: Switch has base address 0x08 or 0x18. Use with model:
-			  6220, 6250
-
-Required properties:
-- compatible		: Should be one of "marvell,mv88e6085",
-			  "marvell,mv88e6190" or "marvell,mv88e6250" as
-			  indicated above
-- reg			: Address on the MII bus for the switch.
-
-Optional properties:
-
-- reset-gpios		: Should be a gpio specifier for a reset line
-- interrupts		: Interrupt from the switch
-- interrupt-controller	: Indicates the switch is itself an interrupt
-			  controller. This is used for the PHY interrupts.
-#interrupt-cells = <2>	: Controller uses two cells, number and flag
-- eeprom-length		: Set to the length of an EEPROM connected to the
-			  switch. Must be set if the switch can not detect
-			  the presence and/or size of a connected EEPROM,
-			  otherwise optional.
-- mdio			: Container of PHY and devices on the switches MDIO
-			  bus.
-- mdio?		: Container of PHYs and devices on the external MDIO
-			  bus. The node must contains a compatible string of
-			  "marvell,mv88e6xxx-mdio-external"
-
-Example:
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		switch0: switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy0: switch1phy0@0 {
-					reg = <0>;
-					interrupt-parent = <&switch0>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		switch0: switch@0 {
-			compatible = "marvell,mv88e6190";
-			reg = <0>;
-			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy0: switch1phy0@0 {
-					reg = <0>;
-					interrupt-parent = <&switch0>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			mdio1 {
-				compatible = "marvell,mv88e6xxx-mdio-external";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy9: switch1phy0@9 {
-					reg = <9>;
-				};
-			};
-		};
-	};

diff --git a/Bindings/net/dsa/microchip,ksz.yaml b/Bindings/net/dsa/microchip,ksz.yaml
index b3029c6..c963dc0 100644
--- a/Bindings/net/dsa/microchip,ksz.yaml
+++ b/Bindings/net/dsa/microchip,ksz.yaml

@@ -11,7 +11,6 @@
   - Woojung Huh <Woojung.Huh@microchip.com>
 
 allOf:
-  - $ref: dsa.yaml#/$defs/ethernet-ports
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
@@ -78,6 +77,39 @@
   - compatible
   - reg
 
+if:
+  not:
+    properties:
+      compatible:
+        enum:
+          - microchip,ksz8863
+          - microchip,ksz8873
+then:
+  $ref: dsa.yaml#/$defs/ethernet-ports
+else:
+  patternProperties:
+    "^(ethernet-)?ports$":
+      patternProperties:
+        "^(ethernet-)?port@[0-2]$":
+          $ref: dsa-port.yaml#
+          unevaluatedProperties: false
+          properties:
+            microchip,rmii-clk-internal:
+              $ref: /schemas/types.yaml#/definitions/flag
+              description:
+                When ksz88x3 is acting as clock provier (via REFCLKO) it
+                can select between internal and external RMII reference
+                clock. Internal reference clock means that the clock for
+                the RMII of ksz88x3 is provided by the ksz88x3 internally
+                and the REFCLKI pin is unconnected. For the external
+                reference clock, the clock needs to be fed back to ksz88x3
+                via REFCLKI.
+                If microchip,rmii-clk-internal is set, ksz88x3 will provide
+                rmii reference clock internally, otherwise reference clock
+                should be provided externally.
+          dependencies:
+            microchip,rmii-clk-internal: [ethernet]
+
 unevaluatedProperties: false
 
 examples:

diff --git a/Bindings/net/ethernet-switch.yaml b/Bindings/net/ethernet-switch.yaml
index 72ac67c..b3b7e1a 100644
--- a/Bindings/net/ethernet-switch.yaml
+++ b/Bindings/net/ethernet-switch.yaml

@@ -20,9 +20,26 @@
 
 select: false
 
-properties:
-  $nodename:
-    pattern: "^(ethernet-)?switch(@.*)?$"
+allOf:
+  # This condition is here to satisfy the case where certain device
+  # nodes have to preserve non-standard names because of
+  # backward-compatibility with boot loaders inspecting certain
+  # node names.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,turris-mox-mv88e6085
+              - marvell,turris-mox-mv88e6190
+    then:
+      properties:
+        $nodename:
+          pattern: "switch[0-3]@[0-3]+$"
+    else:
+      properties:
+        $nodename:
+          pattern: "^(ethernet-)?switch(@.*)?$"
 
 patternProperties:
   "^(ethernet-)?ports$":

diff --git a/Bindings/net/lantiq,pef2256.yaml b/Bindings/net/lantiq,pef2256.yaml
new file mode 100644
index 0000000..7da8370
--- /dev/null
+++ b/Bindings/net/lantiq,pef2256.yaml

@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+  line interface component designed to fulfill all required interfacing between
+  an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+  compatible:
+    items:
+      - const: lantiq,pef2256
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master Clock
+      - description: System Clock Receive
+      - description: System Clock Transmit
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: sclkr
+      - const: sclkx
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO used to reset the device.
+    maxItems: 1
+
+  pinctrl:
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+        $ref: /schemas/pinctrl/pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          pins:
+            enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+          function:
+            enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+                    SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+                    GPI, GPOH, GPOL ]
+
+        required:
+          - pins
+          - function
+
+  lantiq,data-rate-bps:
+    enum: [2048000, 4096000, 8192000, 16384000]
+    default: 2048000
+    description:
+      Data rate (bit per seconds) on the system highway.
+
+  lantiq,clock-falling-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data is sent on falling edge of the clock (and received on the rising
+      edge). If 'clock-falling-edge' is not present, data is sent on the
+      rising edge (and received on the falling edge).
+
+  lantiq,channel-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description: |
+      The pef2256 delivers a full frame (32 8-bit time-slots in E1 and 24 8-bit
+      time-slots 8 8-bit signaling in E1/J1) every 125us. This lead to a data
+      rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+      bit/s, the data (all 32 8-bit) present in the frame are interleave with
+      unused time-slots. The lantiq,channel-phase property allows to set the
+      correct alignment of the interleave mechanism.
+      For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+      lantiq,channel-phase = 2, the interleave schema with unused time-slots
+      (nu) and used time-slots (XX) for TSi is
+        nu nu XX nu nu nu XX nu nu nu XX nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+      interleave schema is
+        nu XX nu nu nu XX nu nu nu XX nu nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+      lantiq,channel-phase = 1, the interleave schema is
+        nu    XX    nu    XX    nu    XX
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+patternProperties:
+  '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$':
+    type: object
+    $ref: /schemas/sound/dai-common.yaml
+    unevaluatedProperties: false
+    description:
+      Codec provided by the pef2256. This codec allows to use some of the PCM
+      system highway time-slots as audio channels to transport audio data over
+      the E1/T1/J1 lines.
+      The time-slots used by the codec must be set and so, the properties
+      'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+      'dai-tdm-slot-rx-mask' must be present in the sound card node for
+      sub-nodes that involve the codec. The codec uses 8-bit time-slots.
+      'dai-tdm-tdm-slot-with' must be set to 8.
+      The tx and rx masks define the pef2256 time-slots assigned to the codec.
+
+    properties:
+      compatible:
+        const: lantiq,pef2256-codec
+
+      '#sound-dai-cells':
+        const: 0
+
+    required:
+      - compatible
+      - '#sound-dai-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pef2256: framer@2000000 {
+      compatible = "lantiq,pef2256";
+      reg = <0x2000000 0x100>;
+      interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+      interrupt-parent = <&intc>;
+      clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+      clock-names = "mclk", "sclkr", "sclkx";
+      reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+      lantiq,data-rate-bps = <4096000>;
+
+      pinctrl {
+        pef2256_rpa_sypr: rpa-pins {
+          pins = "RPA";
+          function = "SYPR";
+        };
+        pef2256_xpa_sypx: xpa-pins {
+          pins = "XPA";
+          function = "SYPX";
+        };
+      };
+
+      pef2256_codec0: codec-0 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_0";
+      };
+
+      pef2256_codec1: codec-1 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_1";
+      };
+    };
+
+    sound {
+      compatible = "simple-audio-card";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */
+        reg = <0>;
+        cpu {
+          sound-dai = <&cpu_dai1>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec0>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 1, 2, 3, 4 */
+          dai-tdm-slot-tx-mask = <0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 1 1 1 1>;
+        };
+      };
+      simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */
+        reg = <1>;
+        cpu {
+          sound-dai = <&cpu_dai2>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec1>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 5, 6, 7, 8 */
+          dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>;
+        };
+      };
+    };

diff --git a/Bindings/net/marvell,aquantia.yaml b/Bindings/net/marvell,aquantia.yaml
new file mode 100644
index 0000000..9854fab
--- /dev/null
+++ b/Bindings/net/marvell,aquantia.yaml

@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,aquantia.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Aquantia Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  Marvell Aquantia Ethernet PHY require a firmware to be loaded to actually
+  work.
+
+  This can be done and is implemented by OEM in 3 different way:
+    - Attached SPI flash directly to the PHY with the firmware. The PHY
+      will self load the firmware in the presence of this configuration.
+    - Read from a dedicated partition on system NAND declared in an
+      NVMEM cell, and loaded to the PHY using its mailbox interface.
+    - Manually provided firmware loaded from a file in the filesystem.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ethernet-phy-id03a1.b445
+          - ethernet-phy-id03a1.b460
+          - ethernet-phy-id03a1.b4a2
+          - ethernet-phy-id03a1.b4d0
+          - ethernet-phy-id03a1.b4e0
+          - ethernet-phy-id03a1.b5c2
+          - ethernet-phy-id03a1.b4b0
+          - ethernet-phy-id03a1.b662
+          - ethernet-phy-id03a1.b712
+          - ethernet-phy-id31c3.1c12
+  required:
+    - compatible
+
+properties:
+  reg:
+    maxItems: 1
+
+  firmware-name:
+    description: specify the name of PHY firmware to load
+
+  nvmem-cells:
+    description: phandle to the firmware nvmem cell
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: firmware
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id31c3.1c12",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <0>;
+            firmware-name = "AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld";
+        };
+
+        ethernet-phy@1 {
+            compatible = "ethernet-phy-id31c3.1c12",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <1>;
+            nvmem-cells = <&aqr_fw>;
+            nvmem-cell-names = "firmware";
+        };
+    };
+
+    flash {
+        compatible = "jedec,spi-nor";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partitions {
+            compatible = "fixed-partitions";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            /* ... */
+
+            partition@650000 {
+                compatible = "nvmem-cells";
+                label = "0:ethphyfw";
+                reg = <0x650000 0x80000>;
+                read-only;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                aqr_fw: aqr_fw@0 {
+                    reg = <0x0 0x5f42a>;
+                };
+            };
+
+            /* ... */
+
+        };
+    };

diff --git a/Bindings/net/marvell,mvusb.yaml b/Bindings/net/marvell,mvusb.yaml
index 3a33251..ab838c1 100644
--- a/Bindings/net/marvell,mvusb.yaml
+++ b/Bindings/net/marvell,mvusb.yaml

@@ -50,11 +50,14 @@
                     #address-cells = <1>;
                     #size-cells = <0>;
 
-                    switch@0 {
+                    ethernet-switch@0 {
                             compatible = "marvell,mv88e6190";
                             reg = <0x0>;
 
-                            ports {
+                            ethernet-ports {
+                                    #address-cells = <1>;
+                                    #size-cells = <0>;
+
                                     /* Port definitions */
                             };
 

diff --git a/Bindings/net/marvell,orion-mdio.yaml b/Bindings/net/marvell,orion-mdio.yaml
index e35da8b..7342985 100644
--- a/Bindings/net/marvell,orion-mdio.yaml
+++ b/Bindings/net/marvell,orion-mdio.yaml

@@ -39,28 +39,6 @@
 allOf:
   - $ref: mdio.yaml#
 
-  - if:
-      required:
-        - interrupts
-
-    then:
-      properties:
-        reg:
-          items:
-            - items:
-                - $ref: /schemas/types.yaml#/definitions/cell
-                - const: 0x84
-
-    else:
-      properties:
-        reg:
-          items:
-            - items:
-                - $ref: /schemas/types.yaml#/definitions/cell
-                - enum:
-                    - 0x4
-                    - 0x10
-
 unevaluatedProperties: false
 
 examples:

diff --git a/Bindings/net/marvell,prestera.yaml b/Bindings/net/marvell,prestera.yaml
index 5ea8b73..16ff892 100644
--- a/Bindings/net/marvell,prestera.yaml
+++ b/Bindings/net/marvell,prestera.yaml

@@ -78,8 +78,8 @@
     pcie@0 {
         #address-cells = <3>;
         #size-cells = <2>;
-        ranges = <0x0 0x0 0x0 0x0 0x0 0x0>;
-        reg = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        ranges = <0x02000000 0x0 0x100000 0x10000000 0x0 0x0>;
+        reg = <0x0 0x1000>;
         device_type = "pci";
 
         switch@0,0 {

diff --git a/Bindings/net/pcs/mediatek,sgmiisys.yaml b/Bindings/net/pcs/mediatek,sgmiisys.yaml
index 66a9519..1bacc0e 100644
--- a/Bindings/net/pcs/mediatek,sgmiisys.yaml
+++ b/Bindings/net/pcs/mediatek,sgmiisys.yaml

@@ -15,15 +15,22 @@
 
 properties:
   compatible:
-    items:
-      - enum:
-          - mediatek,mt7622-sgmiisys
-          - mediatek,mt7629-sgmiisys
-          - mediatek,mt7981-sgmiisys_0
-          - mediatek,mt7981-sgmiisys_1
-          - mediatek,mt7986-sgmiisys_0
-          - mediatek,mt7986-sgmiisys_1
-      - const: syscon
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7622-sgmiisys
+              - mediatek,mt7629-sgmiisys
+              - mediatek,mt7981-sgmiisys_0
+              - mediatek,mt7981-sgmiisys_1
+              - mediatek,mt7986-sgmiisys_0
+              - mediatek,mt7986-sgmiisys_1
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt7988-sgmiisys0
+              - mediatek,mt7988-sgmiisys1
+          - const: simple-mfd
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -35,11 +42,51 @@
     description: Invert polarity of the SGMII data lanes
     type: boolean
 
+  pcs:
+    type: object
+    description: MediaTek LynxI HSGMII PCS
+    properties:
+      compatible:
+        const: mediatek,mt7988-sgmii
+
+      clocks:
+        maxItems: 3
+
+      clock-names:
+        items:
+          - const: sgmii_sel
+          - const: sgmii_tx
+          - const: sgmii_rx
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
   - '#clock-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7988-sgmiisys0
+              - mediatek,mt7988-sgmiisys1
+
+    then:
+      required:
+        - pcs
+
+    else:
+      properties:
+        pcs: false
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/net/qcom,ipa.yaml b/Bindings/net/qcom,ipa.yaml
index 2d5e4ff..c302186 100644
--- a/Bindings/net/qcom,ipa.yaml
+++ b/Bindings/net/qcom,ipa.yaml

@@ -43,15 +43,21 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,msm8998-ipa
-      - qcom,sc7180-ipa
-      - qcom,sc7280-ipa
-      - qcom,sdm845-ipa
-      - qcom,sdx55-ipa
-      - qcom,sdx65-ipa
-      - qcom,sm6350-ipa
-      - qcom,sm8350-ipa
+    oneOf:
+      - enum:
+          - qcom,msm8998-ipa
+          - qcom,sc7180-ipa
+          - qcom,sc7280-ipa
+          - qcom,sdm845-ipa
+          - qcom,sdx55-ipa
+          - qcom,sdx65-ipa
+          - qcom,sm6350-ipa
+          - qcom,sm8350-ipa
+          - qcom,sm8550-ipa
+      - items:
+          - enum:
+              - qcom,sm8650-ipa
+          - const: qcom,sm8550-ipa
 
   reg:
     items:

diff --git a/Bindings/net/renesas,etheravb.yaml b/Bindings/net/renesas,etheravb.yaml
index 5d074f2..890f785 100644
--- a/Bindings/net/renesas,etheravb.yaml
+++ b/Bindings/net/renesas,etheravb.yaml

@@ -55,9 +55,10 @@
 
       - items:
           - enum:
-              - renesas,r9a07g043-gbeth # RZ/G2UL
+              - renesas,r9a07g043-gbeth # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-gbeth # RZ/G2{L,LC}
               - renesas,r9a07g054-gbeth # RZ/V2L
+              - renesas,r9a08g045-gbeth # RZ/G3S
           - const: renesas,rzg2l-gbeth  # RZ/{G2L,G2UL,V2L} family
 
   reg: true

diff --git a/Bindings/net/renesas,ethertsn.yaml b/Bindings/net/renesas,ethertsn.yaml
new file mode 100644
index 0000000..ea35d19
--- /dev/null
+++ b/Bindings/net/renesas,ethertsn.yaml

@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,ethertsn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet TSN End-station
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The RTSN device provides Ethernet network using a 10 Mbps, 100 Mbps, or 1
+  Gbps full-duplex link via MII/GMII/RMII/RGMII. Depending on the connected PHY.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a779g0-ethertsn       # R-Car V4H
+      - const: renesas,rcar-gen4-ethertsn
+
+  reg:
+    items:
+      - description: TSN End Station target
+      - description: generalized Precision Time Protocol target
+
+  reg-names:
+    items:
+      - const: tsnes
+      - const: gptp
+
+  interrupts:
+    items:
+      - description: TX data interrupt
+      - description: RX data interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode:
+    contains:
+      enum:
+        - mii
+        - rgmii
+
+  phy-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a PHY device.
+
+  rx-internal-delay-ps:
+    enum: [0, 1800]
+    default: 0
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+    default: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779g0-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    tsn0: ethernet@e6460000 {
+        compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn";
+        reg = <0xe6460000 0x7000>,
+              <0xe6449000 0x500>;
+        reg-names = "tsnes", "gptp";
+        interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "tx", "rx";
+        clocks = <&cpg CPG_MOD 2723>;
+        power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+        resets = <&cpg 2723>;
+
+        phy-mode = "rgmii";
+        tx-internal-delay-ps = <2000>;
+        phy-handle = <&phy3>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy3: ethernet-phy@3 {
+            compatible = "ethernet-phy-ieee802.3-c45";
+            reg = <0>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+        };
+    };

diff --git a/Bindings/net/sff,sfp.yaml b/Bindings/net/sff,sfp.yaml
index 973e478..bf6cbc7 100644
--- a/Bindings/net/sff,sfp.yaml
+++ b/Bindings/net/sff,sfp.yaml

@@ -120,7 +120,7 @@
       pinctrl-names = "default";
       pinctrl-0 = <&cps_sfpp0_pins>;
       tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
-      tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
     };
 
     mdio {

diff --git a/Bindings/net/xlnx,axi-ethernet.yaml b/Bindings/net/xlnx,axi-ethernet.yaml
index 1d33d80..bbe89ea 100644
--- a/Bindings/net/xlnx,axi-ethernet.yaml
+++ b/Bindings/net/xlnx,axi-ethernet.yaml

@@ -122,6 +122,20 @@
       and "phy-handle" should point to an external PHY if exists.
     maxItems: 1
 
+  dmas:
+    minItems: 2
+    maxItems: 32
+    description: TX and RX DMA channel phandle
+
+  dma-names:
+    items:
+      pattern: "^[tr]x_chan([0-9]|1[0-5])$"
+    description:
+      Should be "tx_chan0", "tx_chan1" ... "tx_chan15" for DMA Tx channel
+      Should be "rx_chan0", "rx_chan1" ... "rx_chan15" for DMA Rx channel
+    minItems: 2
+    maxItems: 32
+
 required:
   - compatible
   - interrupts
@@ -143,6 +157,8 @@
         clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
         phy-mode = "mii";
         reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>;
+        dmas = <&xilinx_dma 0>, <&xilinx_dma 1>;
+        dma-names = "tx_chan0", "rx_chan0";
         xlnx,rxcsum = <0x2>;
         xlnx,rxmem = <0x800>;
         xlnx,txcsum = <0x2>;

diff --git a/Bindings/nvmem/st,stm32-romem.yaml b/Bindings/nvmem/st,stm32-romem.yaml
index a69de3e..92bfe25 100644
--- a/Bindings/nvmem/st,stm32-romem.yaml
+++ b/Bindings/nvmem/st,stm32-romem.yaml

@@ -24,6 +24,7 @@
       - st,stm32f4-otp
       - st,stm32mp13-bsec
       - st,stm32mp15-bsec
+      - st,stm32mp25-bsec
 
   reg:
     maxItems: 1

diff --git a/Bindings/pci/brcm,stb-pcie.yaml b/Bindings/pci/brcm,stb-pcie.yaml
index 7e15aae..22491f7 100644
--- a/Bindings/pci/brcm,stb-pcie.yaml
+++ b/Bindings/pci/brcm,stb-pcie.yaml

@@ -64,6 +64,24 @@
 
   aspm-no-l0s: true
 
+  brcm,clkreq-mode:
+    description: A string that determines the operating
+      clkreq mode of the PCIe RC HW with respect to controlling the refclk
+      signal.  There are three different modes -- "safe", which drives the
+      refclk signal unconditionally and will work for all devices but does
+      not provide any power savings; "no-l1ss" -- which provides Clock
+      Power Management, L0s, and L1, but cannot provide L1 substate (L1SS)
+      power savings. If the downstream device connected to the RC is L1SS
+      capable AND the OS enables L1SS, all PCIe traffic may abruptly halt,
+      potentially hanging the system; "default" -- which provides L0s, L1,
+      and L1SS, but not compliant to provide Clock Power Management;
+      specifically, may not be able to meet the T_CLRon max timing of 400ns
+      as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI
+      Express Mini CEM 2.1 specification.  This situation is atypical and
+      should happen only with older devices.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ safe, no-l1ss, default ]
+
   brcm,scb-sizes:
     description: u64 giving the 64bit PCIe memory
       viewport size of a memory controller.  There may be up to

diff --git a/Bindings/pci/qcom,pcie.yaml b/Bindings/pci/qcom,pcie.yaml
index eadba38..a93ab3b 100644
--- a/Bindings/pci/qcom,pcie.yaml
+++ b/Bindings/pci/qcom,pcie.yaml

@@ -42,6 +42,10 @@
           - qcom,pcie-sm8450-pcie1
           - qcom,pcie-sm8550
       - items:
+          - enum:
+              - qcom,pcie-sm8650
+          - const: qcom,pcie-sm8550
+      - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
 
@@ -62,7 +66,8 @@
     maxItems: 8
 
   iommu-map:
-    maxItems: 2
+    minItems: 1
+    maxItems: 16
 
   # Common definitions for clocks, clock-names and reset.
   # Platform constraints are described later.
@@ -88,7 +93,7 @@
     minItems: 1
     maxItems: 12
 
-  resets-names:
+  reset-names:
     minItems: 1
     maxItems: 12
 
@@ -483,6 +488,33 @@
         compatible:
           contains:
             enum:
+              - qcom,pcie-sc8180x
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ref # REFERENCE clock
+            - const: tbu # PCIe TBU clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,pcie-sdm845
     then:
       oneOf:
@@ -526,8 +558,33 @@
         compatible:
           contains:
             enum:
-              - qcom,pcie-sc8180x
               - qcom,pcie-sm8150
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ref # REFERENCE clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,pcie-sm8250
     then:
       oneOf:

diff --git a/Bindings/pci/rcar-pci-host.yaml b/Bindings/pci/rcar-pci-host.yaml
index 8fdfbc7..b6a7cb3 100644
--- a/Bindings/pci/rcar-pci-host.yaml
+++ b/Bindings/pci/rcar-pci-host.yaml

@@ -68,6 +68,15 @@
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
 required:
   - compatible
   - reg
@@ -121,5 +130,7 @@
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };

diff --git a/Bindings/pci/rockchip-dw-pcie.yaml b/Bindings/pci/rockchip-dw-pcie.yaml
index 1ae8dcf..5f71921 100644
--- a/Bindings/pci/rockchip-dw-pcie.yaml
+++ b/Bindings/pci/rockchip-dw-pcie.yaml

@@ -49,6 +49,7 @@
       - description: APB clock for PCIe
       - description: Auxiliary clock for PCIe
       - description: PIPE clock
+      - description: Reference clock for PCIe
 
   clock-names:
     minItems: 5
@@ -59,6 +60,7 @@
       - const: pclk
       - const: aux
       - const: pipe
+      - const: ref
 
   interrupts:
     items:

diff --git a/Bindings/pci/ti,j721e-pci-ep.yaml b/Bindings/pci/ti,j721e-pci-ep.yaml
index 6229218..97f2579 100644
--- a/Bindings/pci/ti,j721e-pci-ep.yaml
+++ b/Bindings/pci/ti,j721e-pci-ep.yaml

@@ -10,13 +10,11 @@
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
-allOf:
-  - $ref: cdns-pcie-ep.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: ti,j721e-pcie-ep
+      - const: ti,j784s4-pcie-ep
       - description: PCIe EP controller in AM64
         items:
           - const: ti,am64-pcie-ep
@@ -65,6 +63,41 @@
     items:
       - const: link_state
 
+allOf:
+  - $ref: cdns-pcie-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j7200-pcie-ep
+            - ti,j721e-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j784s4-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 4
+
 required:
   - compatible
   - reg

diff --git a/Bindings/pci/ti,j721e-pci-host.yaml b/Bindings/pci/ti,j721e-pci-host.yaml
index a2c5eae..b7a534c 100644
--- a/Bindings/pci/ti,j721e-pci-host.yaml
+++ b/Bindings/pci/ti,j721e-pci-host.yaml

@@ -10,13 +10,11 @@
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
-allOf:
-  - $ref: cdns-pcie-host.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: ti,j721e-pcie-host
+      - const: ti,j784s4-pcie-host
       - description: PCIe controller in AM64
         items:
           - const: ti,am64-pcie-host
@@ -94,6 +92,41 @@
       interrupts:
         maxItems: 1
 
+allOf:
+  - $ref: cdns-pcie-host.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-pcie-host
+    then:
+      properties:
+        num-lanes:
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j7200-pcie-host
+            - ti,j721e-pcie-host
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j784s4-pcie-host
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 4
+
 required:
   - compatible
   - reg

diff --git a/Bindings/pci/toshiba,visconti-pcie.yaml b/Bindings/pci/toshiba,visconti-pcie.yaml
index 53da2ed..120e3bb 100644
--- a/Bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Bindings/pci/toshiba,visconti-pcie.yaml

@@ -83,7 +83,7 @@
                   <0x0 0x28050000 0x0 0x00010000>,
                   <0x0 0x24200000 0x0 0x00002000>,
                   <0x0 0x24162000 0x0 0x00001000>;
-            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+            reg-names = "dbi", "config", "ulreg", "smu", "mpu";
             device_type = "pci";
             bus-range = <0x00 0xff>;
             num-lanes = <2>;

diff --git a/Bindings/perf/fsl-imx-ddr.yaml b/Bindings/perf/fsl-imx-ddr.yaml
index e9fad4b..6c96a42 100644
--- a/Bindings/perf/fsl-imx-ddr.yaml
+++ b/Bindings/perf/fsl-imx-ddr.yaml

@@ -27,6 +27,9 @@
               - fsl,imx8mq-ddr-pmu
               - fsl,imx8mp-ddr-pmu
           - const: fsl,imx8m-ddr-pmu
+      - items:
+          - const: fsl,imx8dxl-ddr-pmu
+          - const: fsl,imx8-ddr-pmu
 
   reg:
     maxItems: 1

diff --git a/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
index c8c83ac..81c2654 100644
--- a/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
+++ b/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml

@@ -16,20 +16,8 @@
   "#phy-cells":
     const: 0
 
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - "#phy-cells"
 
 additionalProperties: false
-
-examples:
-  - |
-    phy@0 {
-          compatible = "amlogic,g12a-mipi-dphy-analog";
-          reg = <0x0 0xc>;
-          #phy-cells = <0>;
-    };

diff --git a/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
index 009a398..70def36 100644
--- a/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+++ b/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml

@@ -9,16 +9,6 @@
 maintainers:
   - Remi Pommarel <repk@triplefau.lt>
 
-description: |+
-  The Everything-Else Power Domains node should be the child of a syscon
-  node with the required property:
-
-  - compatible: Should be the following:
-                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
-
-  Refer to the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.yaml
-
 properties:
   compatible:
     const: amlogic,axg-mipi-pcie-analog-phy
@@ -31,10 +21,3 @@
   - "#phy-cells"
 
 additionalProperties: false
-
-examples:
-  - |
-    mpphy: phy {
-          compatible = "amlogic,axg-mipi-pcie-analog-phy";
-          #phy-cells = <0>;
-    };

diff --git a/Bindings/phy/mediatek,dsi-phy.yaml b/Bindings/phy/mediatek,dsi-phy.yaml
index 6703689..f6e494d 100644
--- a/Bindings/phy/mediatek,dsi-phy.yaml
+++ b/Bindings/phy/mediatek,dsi-phy.yaml

@@ -31,6 +31,7 @@
       - items:
           - enum:
               - mediatek,mt8188-mipi-tx
+              - mediatek,mt8195-mipi-tx
               - mediatek,mt8365-mipi-tx
           - const: mediatek,mt8183-mipi-tx
       - const: mediatek,mt2701-mipi-tx

diff --git a/Bindings/phy/mediatek,tphy.yaml b/Bindings/phy/mediatek,tphy.yaml
index 2bb9154..acba072 100644
--- a/Bindings/phy/mediatek,tphy.yaml
+++ b/Bindings/phy/mediatek,tphy.yaml

@@ -235,6 +235,15 @@
           Specify the flag to enable BC1.2 if support it
         type: boolean
 
+      mediatek,force-mode:
+        description:
+          The force mode is used to manually switch the shared phy mode between
+          USB3 and PCIe, when USB3 phy type is selected by the consumer, and
+          force-mode is set, will cause phy's power and pipe toggled and force
+          phy as USB3 mode which switched from default PCIe mode. But perfer to
+          use the property "mediatek,syscon-type" for newer SoCs that support it.
+        type: boolean
+
       mediatek,syscon-type:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1

diff --git a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 2c3d655..6c03f2d 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -36,6 +36,8 @@
       - qcom,sm8450-qmp-gen4x2-pcie-phy
       - qcom,sm8550-qmp-gen3x2-pcie-phy
       - qcom,sm8550-qmp-gen4x2-pcie-phy
+      - qcom,sm8650-qmp-gen3x2-pcie-phy
+      - qcom,sm8650-qmp-gen4x2-pcie-phy
 
   reg:
     minItems: 1
@@ -147,6 +149,8 @@
               - qcom,sm8450-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen3x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -189,6 +193,7 @@
           contains:
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
         resets:

diff --git a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index f3a3296..8474eef 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

@@ -32,6 +32,7 @@
       - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8450-qmp-ufs-phy
       - qcom,sm8550-qmp-ufs-phy
+      - qcom,sm8650-qmp-ufs-phy
 
   reg:
     maxItems: 1
@@ -112,6 +113,7 @@
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
+              - qcom,sm8650-qmp-ufs-phy
     then:
       properties:
         clocks:

diff --git a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 57702f7..15d82c6 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -32,6 +32,7 @@
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-uni-phy
       - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,x1e80100-qmp-usb3-uni-phy
 
 
   reg:
@@ -135,6 +136,7 @@
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
               - qcom,sm8350-qmp-usb3-uni-phy
+              - qcom,x1e80100-qmp-usb3-uni-phy
     then:
       properties:
         clocks:
@@ -171,6 +173,7 @@
             enum:
               - qcom,sa8775p-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
+              - qcom,x1e80100-qmp-usb3-uni-phy
     then:
       required:
         - power-domains

diff --git a/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 9af203d..2d0d7e9 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml

@@ -27,6 +27,8 @@
       - qcom,sm8350-qmp-usb3-dp-phy
       - qcom,sm8450-qmp-usb3-dp-phy
       - qcom,sm8550-qmp-usb3-dp-phy
+      - qcom,sm8650-qmp-usb3-dp-phy
+      - qcom,x1e80100-qmp-usb3-dp-phy
 
   reg:
     maxItems: 1
@@ -62,12 +64,12 @@
   "#clock-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   "#phy-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   orientation-switch:
     description:
@@ -128,6 +130,8 @@
             - qcom,sc8280xp-qmp-usb43dp-phy
             - qcom,sm6350-qmp-usb3-dp-phy
             - qcom,sm8550-qmp-usb3-dp-phy
+            - qcom,sm8650-qmp-usb3-dp-phy
+            - qcom,x1e80100-qmp-usb3-dp-phy
     then:
       required:
         - power-domains

diff --git a/Bindings/phy/qcom,snps-eusb2-phy.yaml b/Bindings/phy/qcom,snps-eusb2-phy.yaml
index c958286..b82f7f5 100644
--- a/Bindings/phy/qcom,snps-eusb2-phy.yaml
+++ b/Bindings/phy/qcom,snps-eusb2-phy.yaml

@@ -18,6 +18,8 @@
       - items:
           - enum:
               - qcom,sdx75-snps-eusb2-phy
+              - qcom,sm8650-snps-eusb2-phy
+              - qcom,x1e80100-snps-eusb2-phy
           - const: qcom,sm8550-snps-eusb2-phy
       - const: qcom,sm8550-snps-eusb2-phy
 

diff --git a/Bindings/pinctrl/pinctrl-single.yaml b/Bindings/pinctrl/pinctrl-single.yaml
index 45a307d..c114955 100644
--- a/Bindings/pinctrl/pinctrl-single.yaml
+++ b/Bindings/pinctrl/pinctrl-single.yaml

@@ -31,6 +31,7 @@
               - ti,omap3-padconf
               - ti,omap4-padconf
               - ti,omap5-padconf
+              - ti,j7200-padconf
           - const: pinctrl-single
 
   reg:

diff --git a/Bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Bindings/pinctrl/qcom,ipq5018-tlmm.yaml
index fad0118..2330060 100644
--- a/Bindings/pinctrl/qcom,ipq5018-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,ipq5018-tlmm.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 24
@@ -95,7 +88,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Bindings/pinctrl/qcom,ipq5332-tlmm.yaml
index 3d3086a..e571cd6 100644
--- a/Bindings/pinctrl/qcom,ipq5332-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,ipq5332-tlmm.yaml

@@ -26,13 +26,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 27
@@ -100,7 +93,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 7c3e5e0..ed00fba 100644
--- a/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml

@@ -22,12 +22,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -100,7 +94,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
index e053fbd..6f90dbb 100644
--- a/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 35
@@ -103,7 +96,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml
index e5e9962..bca903b 100644
--- a/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 33
@@ -97,7 +90,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,lpass-lpi-common.yaml b/Bindings/pinctrl/qcom,lpass-lpi-common.yaml
new file mode 100644
index 0000000..3b50457
--- /dev/null
+++ b/Bindings/pinctrl/qcom,lpass-lpi-common.yaml

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC LPASS LPI TLMM Common Properties
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Common properties for the Top Level Mode Multiplexer pin controllers in the
+  Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs.
+
+properties:
+  gpio-controller: true
+
+  "#gpio-cells":
+    description:
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+required:
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+additionalProperties: true
+
+$defs:
+  qcom-tlmm-state:
+    properties:
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    additionalProperties: true
+

diff --git a/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml
index 5ece3b9..bd3cbb4 100644
--- a/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml

@@ -25,19 +25,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -110,6 +98,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
index 5885aee..299e0b4 100644
--- a/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml

@@ -23,18 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  '#interrupt-cells': true
-  gpio-controller: true
-  '#gpio-cells': true
-  gpio-ranges: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -74,6 +62,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index a602bf0..68d3fa2 100644
--- a/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml

@@ -23,12 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
   gpio-reserved-ranges:
     maxItems: 1
 
@@ -82,7 +76,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml
index a059716..61f5be2 100644
--- a/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 86
@@ -92,7 +85,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Bindings/pinctrl/qcom,msm8909-tlmm.yaml
index 5095e86..295dd5f 100644
--- a/Bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,msm8909-tlmm.yaml

@@ -25,19 +25,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -108,6 +96,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml
index 063d004..904af87 100644
--- a/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 61
@@ -114,7 +107,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
index 798aac9..8a3a962 100644
--- a/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml

@@ -22,12 +22,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
 
 patternProperties:
   "-state$":
@@ -117,7 +112,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml
index 9172b50..4661874 100644
--- a/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 76
@@ -108,7 +101,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml
index 8a3be65..840fdaa 100644
--- a/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 73
@@ -124,7 +117,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml
index ca95de0..d4391c1 100644
--- a/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 73
@@ -104,7 +97,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml
index 41525ec..fa90981 100644
--- a/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml

@@ -25,13 +25,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 73
@@ -114,7 +107,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml
index 59d406b..c5010c1 100644
--- a/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
@@ -133,7 +126,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml
index bd6d7ca..bcaa231 100644
--- a/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml

@@ -23,13 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
@@ -118,7 +111,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,pmic-mpp.yaml b/Bindings/pinctrl/qcom,pmic-mpp.yaml
index 80f9606..fe717d8 100644
--- a/Bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Bindings/pinctrl/qcom,pmic-mpp.yaml

@@ -158,34 +158,40 @@
   - |
     #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
-    pm8841_mpp: mpps@a000 {
-      compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
-      reg = <0xa000 0>;
-      gpio-controller;
-      #gpio-cells = <2>;
-      gpio-ranges = <&pm8841_mpp 0 0 4>;
-      gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
-              "BT_LED_CTRL", "GPIO-F";
-      interrupt-controller;
-      #interrupt-cells = <2>;
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      pinctrl-names = "default";
-      pinctrl-0 = <&pm8841_default>;
+        pm8841_mpp: mpps@a000 {
+            compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+            reg = <0xa000>;
 
-      mpp1-state {
-        pins = "mpp1";
-        function = "digital";
-        input-enable;
-        power-source = <PM8841_MPP_S3>;
-      };
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pm8841_mpp 0 0 4>;
+            gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
+                              "BT_LED_CTRL", "GPIO-F";
+            interrupt-controller;
+            #interrupt-cells = <2>;
 
-      default-state {
-        gpio-pins {
-          pins = "mpp1", "mpp2", "mpp3", "mpp4";
-          function = "digital";
-          input-enable;
-          power-source = <PM8841_MPP_S3>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pm8841_default>;
+
+            mpp1-state {
+                pins = "mpp1";
+                function = "digital";
+                input-enable;
+                power-source = <PM8841_MPP_S3>;
+            };
+
+            default-state {
+                gpio-pins {
+                    pins = "mpp1", "mpp2", "mpp3", "mpp4";
+                    function = "digital";
+                    input-enable;
+                    power-source = <PM8841_MPP_S3>;
+                };
+            };
         };
-      };
     };
 ...

diff --git a/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml
index c323f6d..e123beb 100644
--- a/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml

@@ -22,13 +22,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -92,7 +85,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml
index b1b9cd3..4009501 100644
--- a/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml

@@ -29,13 +29,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 60
@@ -130,7 +123,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Bindings/pinctrl/qcom,qdu1000-tlmm.yaml
index 237cac4..88afeae 100644
--- a/Bindings/pinctrl/qcom,qdu1000-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,qdu1000-tlmm.yaml

@@ -23,10 +23,8 @@
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -35,10 +33,6 @@
   gpio-line-names:
     maxItems: 151
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -101,7 +95,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Bindings/pinctrl/qcom,sa8775p-tlmm.yaml
index 2173c52..e9abbf2 100644
--- a/Bindings/pinctrl/qcom,sa8775p-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sa8775p-tlmm.yaml

@@ -22,13 +22,8 @@
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -37,12 +32,6 @@
   gpio-line-names:
     maxItems: 148
 
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -108,6 +97,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml
index 573e459..5606f21 100644
--- a/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml

@@ -29,13 +29,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 60
@@ -112,7 +105,7 @@
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
index 00c5a00..08801cc 100644
--- a/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml

@@ -20,16 +20,6 @@
   reg:
     maxItems: 2
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -45,7 +35,8 @@
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -68,42 +59,14 @@
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-bus-hold: true
-      bias-disable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 required:
   - compatible
   - reg
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,lpass-lpi-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index c8735ab..5329fe2 100644
--- a/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml

@@ -23,24 +23,6 @@
     description: Specifies the TLMM summary IRQ
     maxItems: 1
 
-  interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
-  gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 88
@@ -48,8 +30,6 @@
   gpio-line-names:
     maxItems: 175
 
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -124,14 +104,8 @@
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml
index b086a51..c122bb8 100644
--- a/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml

@@ -31,20 +31,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  '#interrupt-cells': true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-  - reg-names
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -106,6 +93,13 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
index a9167da..240e6d4 100644
--- a/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml

@@ -32,16 +32,6 @@
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -57,7 +47,8 @@
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -79,48 +70,16 @@
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 4bd6d79..ed344de 100644
--- a/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml

@@ -25,19 +25,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -108,6 +96,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml
index 508e063..a00cb43 100644
--- a/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml

@@ -34,10 +34,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 57
@@ -45,10 +41,6 @@
   gpio-line-names:
     maxItems: 114
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -130,7 +122,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Bindings/pinctrl/qcom,sdm670-tlmm.yaml
index 84a15f7..b56e717 100644
--- a/Bindings/pinctrl/qcom,sdm670-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sdm670-tlmm.yaml

@@ -25,23 +25,10 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -98,6 +85,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml
index d301881..dfe5616 100644
--- a/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml

@@ -26,10 +26,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 75
@@ -37,10 +33,6 @@
   gpio-line-names:
     maxItems: 150
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -110,7 +102,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index 67af99d..edbcff9 100644
--- a/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml

@@ -23,12 +23,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
   gpio-reserved-ranges:
     maxItems: 1
 
@@ -102,7 +96,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 2731978..a31b638 100644
--- a/Bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sdx65-tlmm.yaml

@@ -22,12 +22,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-
   gpio-reserved-ranges:
     maxItems: 1
 
@@ -122,7 +116,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Bindings/pinctrl/qcom,sdx75-tlmm.yaml
index 7cb96aa..cb1d978 100644
--- a/Bindings/pinctrl/qcom,sdx75-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sdx75-tlmm.yaml

@@ -22,10 +22,8 @@
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -34,10 +32,6 @@
   gpio-line-names:
     maxItems: 133
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -100,7 +94,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
new file mode 100644
index 0000000..bb08ca5
--- /dev/null
+++ b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml

@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM4450 TLMM block
+
+maintainers:
+  - Tengfei Fan <quic_tengfan@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm4450-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 68
+
+  gpio-line-names:
+    maxItems: 136
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm4450-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm4450-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm4450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
+                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
+                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
+                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
+                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
+                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
+                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
+                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
+                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
+                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
+                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
+                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
+                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
+                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
+                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
+                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
+                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
+                vsense_trigger ]
+
+        required:
+          - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sm4450-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 137>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio23";
+                function = "qup1_se2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio22";
+                function = "qup1_se2";
+                bias-disable;
+            };
+        };
+    };
+...

diff --git a/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
index abac331..f4cf2ce 100644
--- a/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml

@@ -31,16 +31,6 @@
     items:
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -56,7 +46,8 @@
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -75,48 +66,17 @@
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
 
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Bindings/pinctrl/qcom,sm6115-tlmm.yaml
index 871df54..7f36f9b 100644
--- a/Bindings/pinctrl/qcom,sm6115-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm6115-tlmm.yaml

@@ -29,13 +29,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
   gpio-reserved-ranges: true
-  wakeup-parent: true
 
 patternProperties:
   "-state$":
@@ -97,7 +91,7 @@
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Bindings/pinctrl/qcom,sm6125-tlmm.yaml
index 8d77707..ddeaeaa 100644
--- a/Bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm6125-tlmm.yaml

@@ -30,20 +30,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-  - reg-names
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -105,6 +92,13 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Bindings/pinctrl/qcom,sm6350-tlmm.yaml
index 27af379..a4771f8 100644
--- a/Bindings/pinctrl/qcom,sm6350-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm6350-tlmm.yaml

@@ -26,10 +26,6 @@
     minItems: 9
     maxItems: 9
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 78
@@ -37,16 +33,6 @@
   gpio-line-names:
     maxItems: 156
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -112,6 +98,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
index 6e02ba2..047f828 100644
--- a/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm6375-tlmm.yaml

@@ -25,19 +25,7 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
   gpio-reserved-ranges: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
 
 patternProperties:
   "-state$":
@@ -113,6 +101,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Bindings/pinctrl/qcom,sm7150-tlmm.yaml
index ede0f3a..7f23f93 100644
--- a/Bindings/pinctrl/qcom,sm7150-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm7150-tlmm.yaml

@@ -32,13 +32,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 60
@@ -111,7 +104,7 @@
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml
index c643962..bdb7ed4 100644
--- a/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml

@@ -30,13 +30,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 88
@@ -113,7 +106,7 @@
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index 4b4be7e..750c996 100644
--- a/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml

@@ -30,16 +30,6 @@
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -55,7 +45,8 @@
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -78,48 +69,16 @@
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-bus-hold: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 021c547..b5d0434 100644
--- a/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml

@@ -28,13 +28,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 90
@@ -106,7 +99,7 @@
   - reg
   - reg-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
index 2e65ae0..9d782f9 100644
--- a/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml

@@ -33,16 +33,6 @@
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -58,7 +48,8 @@
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +72,16 @@
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Bindings/pinctrl/qcom,sm8350-tlmm.yaml
index 6e8f41f..ec5e096 100644
--- a/Bindings/pinctrl/qcom,sm8350-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm8350-tlmm.yaml

@@ -25,10 +25,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 102
@@ -36,16 +32,6 @@
   gpio-line-names:
     maxItems: 203
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -108,6 +94,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
index 1eefa9a..e756559 100644
--- a/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml

@@ -32,16 +32,6 @@
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -57,7 +47,8 @@
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +72,16 @@
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Bindings/pinctrl/qcom,sm8450-tlmm.yaml
index 5163fe3..16fd2c5 100644
--- a/Bindings/pinctrl/qcom,sm8450-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm8450-tlmm.yaml

@@ -25,10 +25,6 @@
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
-
   gpio-reserved-ranges:
     minItems: 1
     maxItems: 105
@@ -36,16 +32,6 @@
   gpio-line-names:
     maxItems: 210
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
 patternProperties:
   "-state$":
     oneOf:
@@ -107,6 +93,12 @@
     required:
       - pins
 
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

diff --git a/Bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
index ef97432..bf4a72f 100644
--- a/Bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
+++ b/Bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml

@@ -16,7 +16,11 @@
 
 properties:
   compatible:
-    const: qcom,sm8550-lpass-lpi-pinctrl
+    oneOf:
+      - const: qcom,sm8550-lpass-lpi-pinctrl
+      - items:
+          - const: qcom,x1e80100-lpass-lpi-pinctrl
+          - const: qcom,sm8550-lpass-lpi-pinctrl
 
   reg:
     items:
@@ -33,16 +37,6 @@
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -58,7 +52,8 @@
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +76,16 @@
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Bindings/pinctrl/qcom,sm8550-tlmm.yaml
index f789c77..c2ae79d 100644
--- a/Bindings/pinctrl/qcom,sm8550-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm8550-tlmm.yaml

@@ -22,10 +22,8 @@
   reg:
     maxItems: 1
 
-  interrupts: true
-  interrupt-controller: true
-  "#interrupt-cells": true
-  gpio-controller: true
+  interrupts:
+    maxItems: 1
 
   gpio-reserved-ranges:
     minItems: 1
@@ -34,10 +32,6 @@
   gpio-line-names:
     maxItems: 210
 
-  "#gpio-cells": true
-  gpio-ranges: true
-  wakeup-parent: true
-
 patternProperties:
   "-state$":
     oneOf:
@@ -117,7 +111,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000..db72143
--- /dev/null
+++ b/Bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml

@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 SoC LPASS LPI TLMM
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8650-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8650-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8650-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8650-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+      function:
+        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+                dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+                ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
+                i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+                i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
+                i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk,
+                slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data,
+                wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+allOf:
+  - $ref: qcom,lpass-lpi-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+    lpass_tlmm: pinctrl@6e80000 {
+        compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+        reg = <0x06e80000 0x20000>;
+
+        clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+        tx-swr-sleep-clk-state {
+            pins = "gpio0";
+            function = "swr_tx_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };

diff --git a/Bindings/pinctrl/qcom,sm8650-tlmm.yaml b/Bindings/pinctrl/qcom,sm8650-tlmm.yaml
new file mode 100644
index 0000000..c0a06ab
--- /dev/null
+++ b/Bindings/pinctrl/qcom,sm8650-tlmm.yaml

@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8650 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8650 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8650-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 105
+
+  gpio-line-names:
+    maxItems: 210
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8650-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8650-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8650-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+                audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4,
+                cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer,
+                cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx,
+                coex_uart2_tx, cri_trng, dbg_out_clk, ddr_bist_complete,
+                ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, do_not, dp_hot, gcc_gp1,
+                gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, i2chub0_se0,
+                i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
+                i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
+                i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws,
+                i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c,
+                jitter_bist, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out,
+                mdp_vsync2_out, mdp_vsync3_out, mdp_vsync_e, nav_gpio0,
+                nav_gpio1, nav_gpio2, nav_gpio3, pcie0_clk_req_n,
+                pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qlink_big_enable, qlink_big_request,
+                qlink_little_enable, qlink_little_request, qlink_wmss,
+                qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup1_se0,
+                qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6,
+                qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, qup2_se4,
+                qup2_se5, qup2_se6, qup2_se7, sd_write_protect, sdc40, sdc41,
+                sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
+                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+                tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
+                tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, uim0_clk,
+                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1,
+                vsense_trigger_mirnat ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sm8650-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio60";
+                function = "qup1_se7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio61";
+                function = "qup1_se7";
+                bias-disable;
+            };
+        };
+    };
+...

diff --git a/Bindings/pinctrl/qcom,x1e80100-tlmm.yaml b/Bindings/pinctrl/qcom,x1e80100-tlmm.yaml
new file mode 100644
index 0000000..a1333e0
--- /dev/null
+++ b/Bindings/pinctrl/qcom,x1e80100-tlmm.yaml

@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. X1E80100 TLMM block
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,x1e80100-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 119
+
+  gpio-line-names:
+    maxItems: 238
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-x1e80100-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-x1e80100-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-x1e80100-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cci, aoss_cti, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_usb,
+                audio_ext, audio_ref, cam_aon, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3,
+                cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7,
+                edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac,
+                eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2,
+                gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0,
+                i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5,
+                mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk,
+                pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0,
+                qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+                qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2,
+                qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk,
+                sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle,
+                tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5,
+                tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy,
+                usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx,
+                usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,x1e80100-tlmm";
+        reg = <0x0f100000 0xf00000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 239>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup2_se7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup2_se7";
+                bias-disable;
+            };
+        };
+    };
+...

diff --git a/Bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
index 8271e7b..8b8e4e1 100644
--- a/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ b/Bindings/pinctrl/renesas,rza2-pinctrl.yaml

@@ -20,7 +20,7 @@
 
 properties:
   compatible:
-    const: "renesas,r7s9210-pinctrl" # RZ/A2M
+    const: renesas,r7s9210-pinctrl # RZ/A2M
 
   reg:
     maxItems: 1

diff --git a/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index b5ca40d..d476de8 100644
--- a/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml

@@ -185,17 +185,17 @@
                     sd1_mux {
                             pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
                                      <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
 
                     sd1_data {
                             pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
 
                     sd1_ctrl {
                             pins = "SD1_CLK", "SD1_CMD";
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
             };
     };

diff --git a/Bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
index 1de91a5..4dfb49b 100644
--- a/Bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
+++ b/Bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml

@@ -28,15 +28,27 @@
 
 properties:
   compatible:
-    enum:
-      - samsung,s3c2410-wakeup-eint
-      - samsung,s3c2412-wakeup-eint
-      - samsung,s3c64xx-wakeup-eint
-      - samsung,s5pv210-wakeup-eint
-      - samsung,exynos4210-wakeup-eint
-      - samsung,exynos7-wakeup-eint
-      - samsung,exynos850-wakeup-eint
-      - samsung,exynosautov9-wakeup-eint
+    oneOf:
+      - enum:
+          - samsung,s3c2410-wakeup-eint
+          - samsung,s3c2412-wakeup-eint
+          - samsung,s3c64xx-wakeup-eint
+          - samsung,s5pv210-wakeup-eint
+          - samsung,exynos4210-wakeup-eint
+          - samsung,exynos7-wakeup-eint
+          - samsung,exynosautov920-wakeup-eint
+      - items:
+          - enum:
+              - samsung,exynos5433-wakeup-eint
+              - samsung,exynos7885-wakeup-eint
+              - samsung,exynos850-wakeup-eint
+          - const: samsung,exynos7-wakeup-eint
+      - items:
+          - enum:
+              - google,gs101-wakeup-eint
+              - samsung,exynosautov9-wakeup-eint
+          - const: samsung,exynos850-wakeup-eint
+          - const: samsung,exynos7-wakeup-eint
 
   interrupts:
     description:
@@ -79,11 +91,14 @@
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - samsung,s5pv210-wakeup-eint
-              - samsung,exynos4210-wakeup-eint
-              - samsung,exynos7-wakeup-eint
+          # Match without "contains", to skip newer variants which are still
+          # compatible with samsung,exynos7-wakeup-eint
+          enum:
+            - samsung,s5pv210-wakeup-eint
+            - samsung,exynos4210-wakeup-eint
+            - samsung,exynos5433-wakeup-eint
+            - samsung,exynos7-wakeup-eint
+            - samsung,exynos7885-wakeup-eint
     then:
       properties:
         interrupts:
@@ -98,7 +113,7 @@
           contains:
             enum:
               - samsung,exynos850-wakeup-eint
-              - samsung,exynosautov9-wakeup-eint
+              - samsung,exynosautov920-wakeup-eint
     then:
       properties:
         interrupts: false

diff --git a/Bindings/pinctrl/samsung,pinctrl.yaml b/Bindings/pinctrl/samsung,pinctrl.yaml
index 2661462..118549c 100644
--- a/Bindings/pinctrl/samsung,pinctrl.yaml
+++ b/Bindings/pinctrl/samsung,pinctrl.yaml

@@ -35,6 +35,7 @@
 
   compatible:
     enum:
+      - google,gs101-pinctrl
       - samsung,s3c2412-pinctrl
       - samsung,s3c2416-pinctrl
       - samsung,s3c2440-pinctrl
@@ -53,6 +54,7 @@
       - samsung,exynos7885-pinctrl
       - samsung,exynos850-pinctrl
       - samsung,exynosautov9-pinctrl
+      - samsung,exynosautov920-pinctrl
       - tesla,fsd-pinctrl
 
   interrupts:
@@ -313,7 +315,8 @@
         pinctrl-0 = <&initial_alive>;
 
         wakeup-interrupt-controller {
-            compatible = "samsung,exynos7-wakeup-eint";
+            compatible = "samsung,exynos5433-wakeup-eint",
+                         "samsung,exynos7-wakeup-eint";
             interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
         };
 

diff --git a/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
index b85f9e3..d2676f9 100644
--- a/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml

@@ -39,7 +39,7 @@
       phandle to the SLCR.
 
 patternProperties:
-  '^(.*-)?(default|gpio)$':
+  '^(.*-)?(default|gpio-grp)$':
     type: object
     patternProperties:
       '^mux':

diff --git a/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 01b6f2b..f13d315 100644
--- a/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml

@@ -31,7 +31,7 @@
     const: xlnx,zynqmp-pinctrl
 
 patternProperties:
-  '^(.*-)?(default|gpio)$':
+  '^(.*-)?(default|gpio-grp)$':
     type: object
     patternProperties:
       '^mux':

diff --git a/Bindings/power/fsl,scu-pd.yaml b/Bindings/power/fsl,scu-pd.yaml
index 407b7cf..7a0f1a4 100644
--- a/Bindings/power/fsl,scu-pd.yaml
+++ b/Bindings/power/fsl,scu-pd.yaml

@@ -20,6 +20,7 @@
   compatible:
     items:
       - enum:
+          - fsl,imx8dl-scu-pd
           - fsl,imx8qm-scu-pd
           - fsl,imx8qxp-scu-pd
       - const: fsl,scu-pd

diff --git a/Bindings/power/qcom,rpmpd.yaml b/Bindings/power/qcom,rpmpd.yaml
index da9c584..2ff246c 100644
--- a/Bindings/power/qcom,rpmpd.yaml
+++ b/Bindings/power/qcom,rpmpd.yaml

@@ -39,7 +39,6 @@
           - qcom,sc7280-rpmhpd
           - qcom,sc8180x-rpmhpd
           - qcom,sc8280xp-rpmhpd
-          - qcom,sc8380xp-rpmhpd
           - qcom,sdm660-rpmpd
           - qcom,sdm670-rpmhpd
           - qcom,sdm845-rpmhpd
@@ -57,6 +56,7 @@
           - qcom,sm8450-rpmhpd
           - qcom,sm8550-rpmhpd
           - qcom,sm8650-rpmhpd
+          - qcom,x1e80100-rpmhpd
       - items:
           - enum:
               - qcom,msm8937-rpmpd

diff --git a/Bindings/power/reset/nvmem-reboot-mode.yaml b/Bindings/power/reset/nvmem-reboot-mode.yaml
index 14a262b..627f8a6 100644
--- a/Bindings/power/reset/nvmem-reboot-mode.yaml
+++ b/Bindings/power/reset/nvmem-reboot-mode.yaml

@@ -28,17 +28,15 @@
     items:
       - const: reboot-mode
 
-patternProperties:
-  "^mode-.+":
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Vendor-specific mode value written to the mode register
+allOf:
+  - $ref: reboot-mode.yaml#
 
 required:
   - compatible
   - nvmem-cells
   - nvmem-cell-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/power/reset/qcom,pon.yaml b/Bindings/power/reset/qcom,pon.yaml
index 5e46012..fc8105a 100644
--- a/Bindings/power/reset/qcom,pon.yaml
+++ b/Bindings/power/reset/qcom,pon.yaml

@@ -111,21 +111,24 @@
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/input/linux-event-codes.h>
    #include <dt-bindings/spmi/spmi.h>
-   spmi_bus: spmi@c440000 {
+
+   spmi@c440000 {
      reg = <0x0c440000 0x1100>;
      #address-cells = <2>;
      #size-cells = <0>;
-     pmk8350: pmic@0 {
+
+     pmic@0 {
        reg = <0x0 SPMI_USID>;
        #address-cells = <1>;
        #size-cells = <0>;
-       pmk8350_pon: pon_hlos@1300 {
-         reg = <0x1300>;
+
+       pon@800 {
          compatible = "qcom,pm8998-pon";
+         reg = <0x800>;
 
          pwrkey {
             compatible = "qcom,pm8941-pwrkey";
-            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
             debounce = <15625>;
             bias-pull-up;
             linux,code = <KEY_POWER>;

diff --git a/Bindings/power/reset/syscon-reboot-mode.yaml b/Bindings/power/reset/syscon-reboot-mode.yaml
index 9b1ffce..b6acff1 100644
--- a/Bindings/power/reset/syscon-reboot-mode.yaml
+++ b/Bindings/power/reset/syscon-reboot-mode.yaml

@@ -29,12 +29,10 @@
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Offset in the register map for the mode register (in bytes)
 
-patternProperties:
-  "^mode-.+":
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Vendor-specific mode value written to the mode register
+allOf:
+  - $ref: reboot-mode.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible

diff --git a/Bindings/power/reset/xlnx,zynqmp-power.yaml b/Bindings/power/reset/xlnx,zynqmp-power.yaml
index 45792e2..7998316 100644
--- a/Bindings/power/reset/xlnx,zynqmp-power.yaml
+++ b/Bindings/power/reset/xlnx,zynqmp-power.yaml

@@ -57,7 +57,7 @@
 
     firmware {
       zynqmp-firmware {
-        zynqmp-power {
+        power-management {
           compatible = "xlnx,zynqmp-power";
           interrupts = <0 35 4>;
         };
@@ -70,7 +70,7 @@
 
     firmware {
       zynqmp-firmware {
-        zynqmp-power {
+        power-management {
           compatible = "xlnx,zynqmp-power";
           interrupt-parent = <&gic>;
           interrupts = <0 35 4>;

diff --git a/Bindings/power/supply/bq24190.yaml b/Bindings/power/supply/bq24190.yaml
index d3ebc9d..131b7e5 100644
--- a/Bindings/power/supply/bq24190.yaml
+++ b/Bindings/power/supply/bq24190.yaml

@@ -20,6 +20,7 @@
       - ti,bq24192
       - ti,bq24192i
       - ti,bq24196
+      - ti,bq24296
 
   reg:
     maxItems: 1

diff --git a/Bindings/power/supply/richtek,rt9455.yaml b/Bindings/power/supply/richtek,rt9455.yaml
index 07e38be..89f9603 100644
--- a/Bindings/power/supply/richtek,rt9455.yaml
+++ b/Bindings/power/supply/richtek,rt9455.yaml

@@ -79,10 +79,10 @@
         interrupt-parent = <&gpio1>;
         interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
-        richtek,output-charge-current	    = <500000>;
-        richtek,end-of-charge-percentage    = <10>;
-        richtek,battery-regulation-voltage  = <4200000>;
-        richtek,boost-output-voltage	    = <5050000>;
+        richtek,output-charge-current = <500000>;
+        richtek,end-of-charge-percentage = <10>;
+        richtek,battery-regulation-voltage = <4200000>;
+        richtek,boost-output-voltage = <5050000>;
 
         richtek,min-input-voltage-regulation = <4500000>;
         richtek,avg-input-current-regulation = <500000>;

diff --git a/Bindings/power/wakeup-source.txt b/Bindings/power/wakeup-source.txt
index 697333a..75bc20b 100644
--- a/Bindings/power/wakeup-source.txt
+++ b/Bindings/power/wakeup-source.txt

@@ -3,16 +3,20 @@
 
 Any device nodes
 ----------------
-Nodes that describe devices which has wakeup capability must contain an
+Nodes that describe devices which have wakeup capability may contain a
 "wakeup-source" boolean property.
 
-Also, if device is marked as a wakeup source, then all the primary
-interrupt(s) can be used as wakeup interrupt(s).
+If the device is marked as a wakeup-source, interrupt wake capability depends
+on the device specific "interrupt-names" property. If no interrupts are labeled
+as wake capable, then it is up to the device to determine which interrupts can
+wake the system.
 
-However if the devices have dedicated interrupt as the wakeup source
-then they need to specify/identify the same using device specific
-interrupt name. In such cases only that interrupt can be used as wakeup
-interrupt.
+However if a device has a dedicated interrupt as the wakeup source, then it
+needs to specify/identify it using a device specific interrupt name. In such
+cases only that interrupt can be used as a wakeup interrupt.
+
+While various legacy interrupt names exist, new devices should use "wakeup" as
+the canonical interrupt name.
 
 List of legacy properties and respective binding document
 ---------------------------------------------------------

diff --git a/Bindings/pwm/mediatek,pwm-disp.yaml b/Bindings/pwm/mediatek,pwm-disp.yaml
index 153e146..afcdeed 100644
--- a/Bindings/pwm/mediatek,pwm-disp.yaml
+++ b/Bindings/pwm/mediatek,pwm-disp.yaml

@@ -8,7 +8,6 @@
 
 maintainers:
   - Jitao Shi <jitao.shi@mediatek.com>
-  - Xinlei Lee <xinlei.lee@mediatek.com>
 
 allOf:
   - $ref: pwm.yaml#

diff --git a/Bindings/pwm/pwm-omap-dmtimer.txt b/Bindings/pwm/pwm-omap-dmtimer.txt
deleted file mode 100644
index 25ecfe1..0000000
--- a/Bindings/pwm/pwm-omap-dmtimer.txt
+++ /dev/null

@@ -1,22 +0,0 @@
-* OMAP PWM for dual-mode timers
-
-Required properties:
-- compatible: Shall contain "ti,omap-dmtimer-pwm".
-- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info
-  about these timers.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
-  the cells format.
-
-Optional properties:
-- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet
-- ti,clock-source: Set dmtimer parent clock, values between 0 and 2:
-  - 0x00 - high-frequency system clock (timer_sys_ck)
-  - 0x01 - 32-kHz always-on clock (timer_32k_ck)
-  - 0x02 - external clock (timer_ext_ck, OMAP2 only)
-
-Example:
-	pwm9: dmtimer-pwm@9 {
-		compatible = "ti,omap-dmtimer-pwm";
-		ti,timers = <&timer9>;
-		#pwm-cells = <3>;
-	};

diff --git a/Bindings/pwm/pwm-samsung.yaml b/Bindings/pwm/pwm-samsung.yaml
index 2162f66..17a2b92 100644
--- a/Bindings/pwm/pwm-samsung.yaml
+++ b/Bindings/pwm/pwm-samsung.yaml

@@ -29,7 +29,11 @@
           - samsung,exynos4210-pwm          # 32-bit, Exynos
       - items:
           - enum:
+              - samsung,exynos5433-pwm
+              - samsung,exynos7-pwm
               - samsung,exynosautov9-pwm
+              - samsung,exynosautov920-pwm
+              - tesla,fsd-pwm
           - const: samsung,exynos4210-pwm
 
   reg:

diff --git a/Bindings/pwm/ti,omap-dmtimer-pwm.yaml b/Bindings/pwm/ti,omap-dmtimer-pwm.yaml
new file mode 100644
index 0000000..1e8e094
--- /dev/null
+++ b/Bindings/pwm/ti,omap-dmtimer-pwm.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/ti,omap-dmtimer-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI dual mode timer PWM controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  TI dual mode timer instances have an IO pin for PWM capability
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: ti,omap-dmtimer-pwm
+
+  "#pwm-cells":
+    const: 3
+
+  ti,timers:
+    description: Timer instance phandle for the PWM
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,prescaler:
+    description: |
+      Legacy clock prescaler for timer. The timer counter is prescaled
+      with 2^n where n is the prescaler.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+    deprecated: true
+
+  ti,clock-source:
+    description: |
+      Legacy clock for timer, please use assigned-clocks instead.
+      0x00 - high-frequency system clock (timer_sys_ck)
+      0x01 - 32-kHz always-on clock (timer_32k_ck)
+      0x02 - external clock (timer_ext_ck, OMAP2 only)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+    deprecated: true
+
+required:
+  - compatible
+  - ti,timers
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwm9: pwm {
+      compatible = "ti,omap-dmtimer-pwm";
+      ti,timers = <&timer9>;
+      #pwm-cells = <3>;
+    };

diff --git a/Bindings/regulator/fixed-regulator.yaml b/Bindings/regulator/fixed-regulator.yaml
index ce7751b..9ff9abf 100644
--- a/Bindings/regulator/fixed-regulator.yaml
+++ b/Bindings/regulator/fixed-regulator.yaml

@@ -105,6 +105,8 @@
     description:
       Interrupt signaling a critical under-voltage event.
 
+  system-critical-regulator: true
+
 required:
   - compatible
   - regulator-name

diff --git a/Bindings/regulator/mps,mp5416.yaml b/Bindings/regulator/mps,mp5416.yaml
index 0221397..f825ee9 100644
--- a/Bindings/regulator/mps,mp5416.yaml
+++ b/Bindings/regulator/mps,mp5416.yaml

@@ -62,8 +62,8 @@
              regulator-name = "buck1";
              regulator-min-microvolt = <600000>;
              regulator-max-microvolt = <2187500>;
-             regulator-min-microamp  = <3800000>;
-             regulator-max-microamp  = <6800000>;
+             regulator-min-microamp = <3800000>;
+             regulator-max-microamp = <6800000>;
              regulator-boot-on;
             };
 

diff --git a/Bindings/regulator/mps,mpq7920.yaml b/Bindings/regulator/mps,mpq7920.yaml
index 6de5b02..0d34af9 100644
--- a/Bindings/regulator/mps,mpq7920.yaml
+++ b/Bindings/regulator/mps,mpq7920.yaml

@@ -98,8 +98,8 @@
              regulator-name = "buck1";
              regulator-min-microvolt = <400000>;
              regulator-max-microvolt = <3587500>;
-             regulator-min-microamp  = <460000>;
-             regulator-max-microamp  = <7600000>;
+             regulator-min-microamp = <460000>;
+             regulator-max-microamp = <7600000>;
              regulator-boot-on;
              mps,buck-ovp-disable;
              mps,buck-phase-delay = /bits/ 8 <2>;

diff --git a/Bindings/regulator/qcom,rpmh-regulator.yaml b/Bindings/regulator/qcom,rpmh-regulator.yaml
index acd37f2..27c6d51 100644
--- a/Bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Bindings/regulator/qcom,rpmh-regulator.yaml

@@ -42,6 +42,7 @@
       For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
+      For PM8010, ldo1 - ldo7
       For PM8150, smps1 - smps10, ldo1 - ldo18
       For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
       For PM8350, smps1 - smps12, ldo1 - ldo10
@@ -68,6 +69,7 @@
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators
       - qcom,pm8009-1-rpmh-regulators
+      - qcom,pm8010-rpmh-regulators
       - qcom,pm8150-rpmh-regulators
       - qcom,pm8150l-rpmh-regulators
       - qcom,pm8350-rpmh-regulators
@@ -242,6 +244,18 @@
       properties:
         compatible:
           enum:
+            - qcom,pm8010-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-l4-supply: true
+      patternProperties:
+        "^vdd-l[5-7]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - qcom,pm8150-rpmh-regulators
             - qcom,pmc8180-rpmh-regulators
             - qcom,pmm8155au-rpmh-regulators

diff --git a/Bindings/regulator/qcom,smd-rpm-regulator.yaml b/Bindings/regulator/qcom,smd-rpm-regulator.yaml
index 9ea8ac0..f2fd2df 100644
--- a/Bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Bindings/regulator/qcom,smd-rpm-regulator.yaml

@@ -47,6 +47,9 @@
   For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18
 
+  For pm8937, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
+  l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23
+
   For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
   lvs3, 5vs1, 5vs2
@@ -92,6 +95,7 @@
       - qcom,rpm-pm8841-regulators
       - qcom,rpm-pm8909-regulators
       - qcom,rpm-pm8916-regulators
+      - qcom,rpm-pm8937-regulators
       - qcom,rpm-pm8941-regulators
       - qcom,rpm-pm8950-regulators
       - qcom,rpm-pm8953-regulators

diff --git a/Bindings/regulator/qcom,spmi-regulator.yaml b/Bindings/regulator/qcom,spmi-regulator.yaml
index 7a1b7d2..aea849e 100644
--- a/Bindings/regulator/qcom,spmi-regulator.yaml
+++ b/Bindings/regulator/qcom,spmi-regulator.yaml

@@ -22,6 +22,7 @@
       - qcom,pm8841-regulators
       - qcom,pm8909-regulators
       - qcom,pm8916-regulators
+      - qcom,pm8937-regulators
       - qcom,pm8941-regulators
       - qcom,pm8950-regulators
       - qcom,pm8994-regulators
@@ -296,6 +297,24 @@
         compatible:
           contains:
             enum:
+              - qcom,pm8937-regulators
+    then:
+      properties:
+        vdd_l1_l19-supply: true
+        vdd_l20_l21-supply: true
+        vdd_l2_l23-supply: true
+        vdd_l3-supply: true
+        vdd_l4_l5_l6_l7_l16-supply: true
+        vdd_l8_l11_l12_l17_l22-supply: true
+        vdd_l9_l10_l13_l14_l15_l18-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,pm8950-regulators
     then:
       properties:

diff --git a/Bindings/regulator/qcom,usb-vbus-regulator.yaml b/Bindings/regulator/qcom,usb-vbus-regulator.yaml
index 89c564d..534f87e 100644
--- a/Bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Bindings/regulator/qcom,usb-vbus-regulator.yaml

@@ -36,10 +36,11 @@
 
 examples:
   - |
-     pm8150b {
+     pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        pm8150b_vbus: usb-vbus-regulator@1100 {
+
+        usb-vbus-regulator@1100 {
             compatible = "qcom,pm8150b-vbus-reg";
             reg = <0x1100>;
             regulator-min-microamp = <500000>;

diff --git a/Bindings/regulator/regulator.yaml b/Bindings/regulator/regulator.yaml
index 9daf0fc..1ef380d 100644
--- a/Bindings/regulator/regulator.yaml
+++ b/Bindings/regulator/regulator.yaml

@@ -114,6 +114,11 @@
     description: Enable pull down resistor when the regulator is disabled.
     type: boolean
 
+  system-critical-regulator:
+    description: Set if the regulator is critical to system stability or
+      functionality.
+    type: boolean
+
   regulator-over-current-protection:
     description: Enable over current protection.
     type: boolean
@@ -181,6 +186,14 @@
       be enabled but limit setting can be omitted. Limit is given as microvolt
       offset from voltage set to regulator.
 
+  regulator-uv-less-critical-window-ms:
+    description: Specifies the time window (in milliseconds) following a
+      critical under-voltage event during which the system can continue to
+      operate safely while performing less critical operations. This property
+      provides a defined duration before a more severe reaction to the
+      under-voltage event is needed, allowing for certain non-urgent actions to
+      be carried out in preparation for potential power loss.
+
   regulator-temp-protection-kelvin:
     description: Set over temperature protection limit. This is a limit where
       hardware performs emergency shutdown. Zero can be passed to disable

diff --git a/Bindings/remoteproc/fsl,imx-rproc.yaml b/Bindings/remoteproc/fsl,imx-rproc.yaml
index 30632ef..df36e29 100644
--- a/Bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Bindings/remoteproc/fsl,imx-rproc.yaml

@@ -113,10 +113,10 @@
     };
 
     imx7d-cm4 {
-      compatible	= "fsl,imx7d-cm4";
-      memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
-      syscon		= <&src>;
-      clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
+      compatible = "fsl,imx7d-cm4";
+      memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+      syscon = <&src>;
+      clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
     };
 
   - |

diff --git a/Bindings/remoteproc/qcom,sc7180-pas.yaml b/Bindings/remoteproc/qcom,sc7180-pas.yaml
index f10f329..c054b84 100644
--- a/Bindings/remoteproc/qcom,sc7180-pas.yaml
+++ b/Bindings/remoteproc/qcom,sc7180-pas.yaml

@@ -18,7 +18,10 @@
     enum:
       - qcom,sc7180-adsp-pas
       - qcom,sc7180-mpss-pas
+      - qcom,sc7280-adsp-pas
+      - qcom,sc7280-cdsp-pas
       - qcom,sc7280-mpss-pas
+      - qcom,sc7280-wpss-pas
 
   reg:
     maxItems: 1
@@ -75,6 +78,7 @@
         compatible:
           enum:
             - qcom,sc7180-adsp-pas
+            - qcom,sc7280-adsp-pas
     then:
       properties:
         power-domains:
@@ -114,6 +118,23 @@
         power-domains:
           items:
             - description: CX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mss
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-cdsp-pas
+            - qcom,sc7280-wpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
             - description: MX power domain
         power-domain-names:
           items:

diff --git a/Bindings/reset/amlogic,meson-reset.yaml b/Bindings/reset/amlogic,meson-reset.yaml
index d3fdee8..f0c6c0d 100644
--- a/Bindings/reset/amlogic,meson-reset.yaml
+++ b/Bindings/reset/amlogic,meson-reset.yaml

@@ -18,6 +18,7 @@
       - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
       - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
       - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+      - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
 
   reg:
     maxItems: 1

diff --git a/Bindings/reset/fsl,imx-src.yaml b/Bindings/reset/fsl,imx-src.yaml
index b11ac53..f5ec1d5 100644
--- a/Bindings/reset/fsl,imx-src.yaml
+++ b/Bindings/reset/fsl,imx-src.yaml

@@ -28,28 +28,17 @@
 properties:
   compatible:
     oneOf:
-      - const: "fsl,imx51-src"
+      - const: fsl,imx51-src
       - items:
-          - const: "fsl,imx50-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx53-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6q-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6sx-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6sl-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6ul-src"
-          - const: "fsl,imx51-src"
-      - items:
-          - const: "fsl,imx6sll-src"
-          - const: "fsl,imx51-src"
+          - enum:
+              - fsl,imx50-src
+              - fsl,imx53-src
+              - fsl,imx6q-src
+              - fsl,imx6sx-src
+              - fsl,imx6sl-src
+              - fsl,imx6ul-src
+              - fsl,imx6sll-src
+          - const: fsl,imx51-src
 
   reg:
     maxItems: 1

diff --git a/Bindings/reset/hisilicon,hi3660-reset.yaml b/Bindings/reset/hisilicon,hi3660-reset.yaml
index cdfcf32..e4de002 100644
--- a/Bindings/reset/hisilicon,hi3660-reset.yaml
+++ b/Bindings/reset/hisilicon,hi3660-reset.yaml

@@ -50,32 +50,9 @@
 
 examples:
   - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/hi3660-clock.h>
-
-    iomcu: iomcu@ffd7e000 {
-        compatible = "hisilicon,hi3660-iomcu", "syscon";
-        reg = <0xffd7e000 0x1000>;
-    };
-
-    iomcu_rst: iomcu_rst_controller {
+    iomcu_rst_controller {
         compatible = "hisilicon,hi3660-reset";
         hisilicon,rst-syscon = <&iomcu>;
         #reset-cells = <2>;
     };
-
-    /* Specifying reset lines connected to IP modules */
-    i2c@ffd71000 {
-        compatible = "snps,designware-i2c";
-        reg = <0xffd71000 0x1000>;
-        interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-frequency = <400000>;
-        clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
-        resets = <&iomcu_rst 0x20 3>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
-    };
 ...

diff --git a/Bindings/reset/qcom,aoss-reset.yaml b/Bindings/reset/qcom,aoss-reset.yaml
index d92e2b3..24beb71 100644
--- a/Bindings/reset/qcom,aoss-reset.yaml
+++ b/Bindings/reset/qcom,aoss-reset.yaml

@@ -18,17 +18,17 @@
     oneOf:
       - description: on SC7180 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7180-aoss-cc"
-          - const: "qcom,sdm845-aoss-cc"
+          - const: qcom,sc7180-aoss-cc
+          - const: qcom,sdm845-aoss-cc
 
       - description: on SC7280 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7280-aoss-cc"
-          - const: "qcom,sdm845-aoss-cc"
+          - const: qcom,sc7280-aoss-cc
+          - const: qcom,sdm845-aoss-cc
 
       - description: on SDM845 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sdm845-aoss-cc"
+          - const: qcom,sdm845-aoss-cc
 
   reg:
     maxItems: 1

diff --git a/Bindings/reset/qcom,pdc-global.yaml b/Bindings/reset/qcom,pdc-global.yaml
index ca5d793..f514363 100644
--- a/Bindings/reset/qcom,pdc-global.yaml
+++ b/Bindings/reset/qcom,pdc-global.yaml

@@ -18,16 +18,16 @@
     oneOf:
       - description: on SC7180 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7180-pdc-global"
-          - const: "qcom,sdm845-pdc-global"
+          - const: qcom,sc7180-pdc-global
+          - const: qcom,sdm845-pdc-global
 
       - description: on SC7280 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sc7280-pdc-global"
+          - const: qcom,sc7280-pdc-global
 
       - description: on SDM845 SoCs the following compatibles must be specified
         items:
-          - const: "qcom,sdm845-pdc-global"
+          - const: qcom,sdm845-pdc-global
 
   reg:
     maxItems: 1

diff --git a/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
index 731b8ce..03c1861 100644
--- a/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
+++ b/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml

@@ -17,7 +17,7 @@
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
+          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
           - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
       - const: renesas,rzg2l-usbphy-ctrl

diff --git a/Bindings/reset/xlnx,zynqmp-reset.yaml b/Bindings/reset/xlnx,zynqmp-reset.yaml
index 49db668..1f1b42d 100644
--- a/Bindings/reset/xlnx,zynqmp-reset.yaml
+++ b/Bindings/reset/xlnx,zynqmp-reset.yaml

@@ -7,7 +7,8 @@
 title: Zynq UltraScale+ MPSoC and Versal reset
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 description: |
   The Zynq UltraScale+ MPSoC and Versal has several different resets.

diff --git a/Bindings/riscv/cpus.yaml b/Bindings/riscv/cpus.yaml
index f392e36..9d8670c 100644
--- a/Bindings/riscv/cpus.yaml
+++ b/Bindings/riscv/cpus.yaml

@@ -32,6 +32,7 @@
     oneOf:
       - items:
           - enum:
+              - amd,mbv32
               - andestech,ax45mp
               - canaan,k210
               - sifive,bullet0
@@ -62,8 +63,8 @@
 
   mmu-type:
     description:
-      Identifies the MMU address translation mode used on this
-      hart.  These values originate from the RISC-V Privileged
+      Identifies the largest MMU address translation mode supported by
+      this hart.  These values originate from the RISC-V Privileged
       Specification document, available from
       https://riscv.org/specifications/
     $ref: /schemas/types.yaml#/definitions/string
@@ -79,6 +80,11 @@
     description:
       The blocksize in bytes for the Zicbom cache operations.
 
+  riscv,cbop-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicbop cache operations.
+
   riscv,cboz-block-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:

diff --git a/Bindings/riscv/extensions.yaml b/Bindings/riscv/extensions.yaml
index c91ab0e..63d81dc 100644
--- a/Bindings/riscv/extensions.yaml
+++ b/Bindings/riscv/extensions.yaml

@@ -48,7 +48,7 @@
       insensitive, letters in the riscv,isa string must be all
       lowercase.
     $ref: /schemas/types.yaml#/definitions/string
-    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[0-9a-z])+)?(?:_[hsxz](?:[0-9a-z])+)*$
     deprecated: true
 
   riscv,isa-base:
@@ -171,6 +171,12 @@
             memory types as ratified in the 20191213 version of the privileged
             ISA specification.
 
+        - const: zacas
+          description: |
+            The Zacas extension for Atomic Compare-and-Swap (CAS) instructions
+            is supported as ratified at commit 5059e0ca641c ("update to
+            ratified") of the riscv-zacas.
+
         - const: zba
           description: |
             The standard Zba bit-manipulation extension for address generation
@@ -190,12 +196,111 @@
             multiplication as ratified at commit 6d33919 ("Merge pull request
             #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
 
+        - const: zbkb
+          description:
+            The standard Zbkb bitmanip instructions for cryptography as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zbkc
+          description:
+            The standard Zbkc carry-less multiply instructions as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zbkx
+          description:
+            The standard Zbkx crossbar permutation instructions as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
         - const: zbs
           description: |
             The standard Zbs bit-manipulation extension for single-bit
             instructions as ratified at commit 6d33919 ("Merge pull request #158
             from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
 
+        - const: zfa
+          description:
+            The standard Zfa extension for additional floating point
+            instructions, as ratified in commit 056b6ff ("Zfa is ratified") of
+            riscv-isa-manual.
+
+        - const: zfh
+          description:
+            The standard Zfh extension for 16-bit half-precision binary
+            floating-point instructions, as ratified in commit 64074bc ("Update
+            version numbers for Zfh/Zfinx") of riscv-isa-manual.
+
+        - const: zfhmin
+          description:
+            The standard Zfhmin extension which provides minimal support for
+            16-bit half-precision binary floating-point instructions, as ratified
+            in commit 64074bc ("Update version numbers for Zfh/Zfinx") of
+            riscv-isa-manual.
+
+        - const: zk
+          description:
+            The standard Zk Standard Scalar cryptography extension as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zkn
+          description:
+            The standard Zkn NIST algorithm suite extensions as ratified in
+            version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zknd
+          description: |
+            The standard Zknd for NIST suite: AES decryption instructions as
+            ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zkne
+          description: |
+            The standard Zkne for NIST suite: AES encryption instructions as
+            ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zknh
+          description: |
+            The standard Zknh for NIST suite: hash function instructions as
+            ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zkr
+          description:
+            The standard Zkr entropy source extension as ratified in version
+            1.0 of RISC-V Cryptography Extensions Volume I specification.
+            This string being present means that the CSR associated to this
+            extension is accessible at the privilege level to which that
+            device-tree has been provided.
+
+        - const: zks
+          description:
+            The standard Zks ShangMi algorithm suite extensions as ratified in
+            version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
+        - const: zksed
+          description: |
+            The standard Zksed for ShangMi suite: SM4 block cipher instructions
+            as ratified in version 1.0 of RISC-V Cryptography Extensions
+            Volume I specification.
+
+        - const: zksh
+          description: |
+            The standard Zksh for ShangMi suite: SM3 hash function instructions
+            as ratified in version 1.0 of RISC-V Cryptography Extensions
+            Volume I specification.
+
+        - const: zkt
+          description:
+            The standard Zkt for data independent execution latency as ratified
+            in version 1.0 of RISC-V Cryptography Extensions Volume I
+            specification.
+
         - const: zicbom
           description:
             The standard Zicbom extension for base cache management operations as
@@ -246,6 +351,12 @@
             The standard Zihintpause extension for pause hints, as ratified in
             commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual.
 
+        - const: zihintntl
+          description:
+            The standard Zihintntl extension for non-temporal locality hints, as
+            ratified in commit 0dc91f5 ("Zihintntl is ratified") of the
+            riscv-isa-manual.
+
         - const: zihpm
           description:
             The standard Zihpm extension for hardware performance counters, as
@@ -258,5 +369,113 @@
             in commit 2e5236 ("Ztso is now ratified.") of the
             riscv-isa-manual.
 
+        - const: zvbb
+          description:
+            The standard Zvbb extension for vectored basic bit-manipulation
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvbc
+          description:
+            The standard Zvbc extension for vectored carryless multiplication
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvfh
+          description:
+            The standard Zvfh extension for vectored half-precision
+            floating-point instructions, as ratified in commit e2ccd05
+            ("Remove draft warnings from Zvfh[min]") of riscv-v-spec.
+
+        - const: zvfhmin
+          description:
+            The standard Zvfhmin extension for vectored minimal half-precision
+            floating-point instructions, as ratified in commit e2ccd05
+            ("Remove draft warnings from Zvfh[min]") of riscv-v-spec.
+
+        - const: zvkb
+          description:
+            The standard Zvkb extension for vector cryptography bit-manipulation
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkg
+          description:
+            The standard Zvkg extension for vector GCM/GMAC instructions, as
+            ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc")
+            of riscv-crypto.
+
+        - const: zvkn
+          description:
+            The standard Zvkn extension for NIST algorithm suite instructions, as
+            ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc")
+            of riscv-crypto.
+
+        - const: zvknc
+          description:
+            The standard Zvknc extension for NIST algorithm suite with carryless
+            multiply instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkned
+          description:
+            The standard Zvkned extension for Vector AES block cipher
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkng
+          description:
+            The standard Zvkng extension for NIST algorithm suite with GCM
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvknha
+          description: |
+            The standard Zvknha extension for NIST suite: vector SHA-2 secure,
+            hash (SHA-256 only) instructions, as ratified in commit
+            56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvknhb
+          description: |
+            The standard Zvknhb extension for NIST suite: vector SHA-2 secure,
+            hash (SHA-256 and SHA-512) instructions, as ratified in commit
+            56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvks
+          description:
+            The standard Zvks extension for ShangMi algorithm suite
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksc
+          description:
+            The standard Zvksc extension for ShangMi algorithm suite with
+            carryless multiplication instructions, as ratified in commit 56ed795
+            ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksed
+          description: |
+            The standard Zvksed extension for ShangMi suite: SM4 block cipher
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksh
+          description: |
+            The standard Zvksh extension for ShangMi suite: SM3 secure hash
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvksg
+          description:
+            The standard Zvksg extension for ShangMi algorithm suite with GCM
+            instructions, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+        - const: zvkt
+          description:
+            The standard Zvkt extension for vector data-independent execution
+            latency, as ratified in commit 56ed795 ("Update
+            riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
 additionalProperties: true
 ...

diff --git a/Bindings/riscv/sophgo.yaml b/Bindings/riscv/sophgo.yaml
index 86748c5..9bc813d 100644
--- a/Bindings/riscv/sophgo.yaml
+++ b/Bindings/riscv/sophgo.yaml

@@ -24,6 +24,10 @@
           - const: sophgo,cv1800b
       - items:
           - enum:
+              - sophgo,huashan-pi
+          - const: sophgo,cv1812h
+      - items:
+          - enum:
               - milkv,pioneer
           - const: sophgo,sg2042
 

diff --git a/Bindings/rng/starfive,jh7110-trng.yaml b/Bindings/rng/starfive,jh7110-trng.yaml
index 2b76ce2..4639247 100644
--- a/Bindings/rng/starfive,jh7110-trng.yaml
+++ b/Bindings/rng/starfive,jh7110-trng.yaml

@@ -11,7 +11,11 @@
 
 properties:
   compatible:
-    const: starfive,jh7110-trng
+    oneOf:
+      - items:
+          - const: starfive,jh8100-trng
+          - const: starfive,jh7110-trng
+      - const: starfive,jh7110-trng
 
   reg:
     maxItems: 1

diff --git a/Bindings/rtc/adi,max31335.yaml b/Bindings/rtc/adi,max31335.yaml
new file mode 100644
index 0000000..0125cf6
--- /dev/null
+++ b/Bindings/rtc/adi,max31335.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31335 RTC
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description:
+  Analog Devices MAX31335 I2C RTC ±2ppm Automotive Real-Time Clock with
+  Integrated MEMS Resonator.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: adi,max31335
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      RTC can be used as a clock source through its clock output pin.
+    const: 0
+
+  adi,tc-diode:
+    description:
+      Select the diode configuration for the trickle charger.
+      schottky - Schottky diode in series.
+      standard+schottky - standard diode + Schottky diode in series.
+    enum: [schottky, standard+schottky]
+
+  trickle-resistor-ohms:
+    description:
+      Selected resistor for trickle charger. Should be specified if trickle
+      charger should be enabled.
+    enum: [3000, 6000, 11000]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@68 {
+            compatible = "adi,max31335";
+            reg = <0x68>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            aux-voltage-chargeable = <1>;
+            trickle-resistor-ohms = <6000>;
+            adi,tc-diode = "schottky";
+        };
+    };
+...

diff --git a/Bindings/rtc/epson,rx8900.yaml b/Bindings/rtc/epson,rx8900.yaml
index 1df7c45..b770149 100644
--- a/Bindings/rtc/epson,rx8900.yaml
+++ b/Bindings/rtc/epson,rx8900.yaml

@@ -29,6 +29,8 @@
 
   trickle-diode-disable: true
 
+  wakeup-source: true
+
 required:
   - compatible
   - reg

diff --git a/Bindings/rtc/nuvoton,ma35d1-rtc.yaml b/Bindings/rtc/nuvoton,ma35d1-rtc.yaml
new file mode 100644
index 0000000..5e4ade8
--- /dev/null
+++ b/Bindings/rtc/nuvoton,ma35d1-rtc.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,ma35d1-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Real Time Clock
+
+maintainers:
+  - Min-Jen Chen <mjchen@nuvoton.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,ma35d1-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+    rtc@40410000 {
+        compatible = "nuvoton,ma35d1-rtc";
+        reg = <0x40410000 0x200>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clk RTC_GATE>;
+    };
+
+...

diff --git a/Bindings/rtc/qcom-pm8xxx-rtc.yaml b/Bindings/rtc/qcom-pm8xxx-rtc.yaml
index b95a69c..d274bb7 100644
--- a/Bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ b/Bindings/rtc/qcom-pm8xxx-rtc.yaml

@@ -61,27 +61,27 @@
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/spmi/spmi.h>
-    spmi_bus: spmi@c440000 {
-      reg = <0x0c440000 0x1100>;
-      #address-cells = <2>;
-      #size-cells = <0>;
-      pmicintc: pmic@0 {
-        reg = <0x0 SPMI_USID>;
-        compatible = "qcom,pm8921";
-        interrupts = <104 8>;
-        #interrupt-cells = <2>;
-        interrupt-controller;
-        #address-cells = <1>;
+
+    spmi {
+        #address-cells = <2>;
         #size-cells = <0>;
 
-        pm8921_rtc: rtc@11d {
-          compatible = "qcom,pm8921-rtc";
-          reg = <0x11d>;
-          interrupts = <0x27 0>;
-          nvmem-cells = <&rtc_offset>;
-          nvmem-cell-names = "offset";
+        pmic@0 {
+            compatible = "qcom,pm8941", "qcom,spmi-pmic";
+            reg = <0x0 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rtc@6000 {
+                compatible = "qcom,pm8941-rtc";
+                reg = <0x6000>, <0x6100>;
+                reg-names = "rtc", "alarm";
+                interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+                nvmem-cells = <&rtc_offset>;
+                nvmem-cell-names = "offset";
+            };
         };
-      };
     };
 ...

diff --git a/Bindings/rtc/s3c-rtc.yaml b/Bindings/rtc/s3c-rtc.yaml
index d51b236..bf4e11d 100644
--- a/Bindings/rtc/s3c-rtc.yaml
+++ b/Bindings/rtc/s3c-rtc.yaml

@@ -17,6 +17,11 @@
           - samsung,s3c2416-rtc
           - samsung,s3c2443-rtc
           - samsung,s3c6410-rtc
+      - items:
+          - enum:
+              - samsung,exynos7-rtc
+              - samsung,exynos850-rtc
+          - const: samsung,s3c6410-rtc
       - const: samsung,exynos3250-rtc
         deprecated: true
 

diff --git a/Bindings/security/tpm/google,cr50.txt b/Bindings/security/tpm/google,cr50.txt
deleted file mode 100644
index cd69c2e..0000000
--- a/Bindings/security/tpm/google,cr50.txt
+++ /dev/null

@@ -1,19 +0,0 @@
-* H1 Secure Microcontroller with Cr50 Firmware on SPI Bus.
-
-H1 Secure Microcontroller running Cr50 firmware provides several
-functions, including TPM-like functionality. It communicates over
-SPI using the FIFO protocol described in the PTP Spec, section 6.
-
-Required properties:
-- compatible: Should be "google,cr50".
-- spi-max-frequency: Maximum SPI frequency.
-
-Example:
-
-&spi0 {
-	tpm@0 {
-		compatible = "google,cr50";
-		reg = <0>;
-		spi-max-frequency = <800000>;
-	};
-};

diff --git a/Bindings/security/tpm/ibmvtpm.txt b/Bindings/security/tpm/ibmvtpm.txt
deleted file mode 100644
index d89f999..0000000
--- a/Bindings/security/tpm/ibmvtpm.txt
+++ /dev/null

@@ -1,41 +0,0 @@
-* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm)
-
-Required properties:
-
-- compatible            : property name that conveys the platform architecture
-                          identifiers, as 'IBM,vtpm'
-- device_type           : specifies type of virtual device
-- interrupts            : property specifying the interrupt source number and
-                          sense code associated with this virtual I/O Adapters
-- ibm,my-drc-index      : integer index for the connector between the device
-                          and its parent - present only if Dynamic
-                          Reconfiguration(DR) Connector is enabled
-- ibm,#dma-address-cells: specifies the number of cells that are used to
-                          encode the physical address field of dma-window
-                          properties
-- ibm,#dma-size-cells   : specifies the number of cells that are used to
-                          encode the size field of dma-window properties
-- ibm,my-dma-window     : specifies DMA window associated with this virtual
-                          IOA
-- ibm,loc-code          : specifies the unique and persistent location code
-                          associated with this virtual I/O Adapters
-- linux,sml-base        : 64-bit base address of the reserved memory allocated
-                          for the firmware event log
-- linux,sml-size        : size of the memory allocated for the firmware event log
-
-Example (IBM Virtual Trusted Platform Module)
----------------------------------------------
-
-                vtpm@30000003 {
-                        ibm,#dma-size-cells = <0x2>;
-                        compatible = "IBM,vtpm";
-                        device_type = "IBM,vtpm";
-                        ibm,my-drc-index = <0x30000003>;
-                        ibm,#dma-address-cells = <0x2>;
-                        linux,sml-base = <0xc60e 0x0>;
-                        interrupts = <0xa0003 0x0>;
-                        ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
-                        ibm,loc-code = "U8286.41A.10082DV-V3-C3";
-                        reg = <0x30000003>;
-                        linux,sml-size = <0xbce10200>;
-                };

diff --git a/Bindings/security/tpm/st33zp24-i2c.txt b/Bindings/security/tpm/st33zp24-i2c.txt
deleted file mode 100644
index 0dc121b..0000000
--- a/Bindings/security/tpm/st33zp24-i2c.txt
+++ /dev/null

@@ -1,34 +0,0 @@
-* STMicroelectronics SAS. ST33ZP24 TPM SoC
-
-Required properties:
-- compatible: Should be "st,st33zp24-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-
-Optional ST33ZP24 Properties:
-- interrupts: GPIO interrupt to which the chip is connected
-- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
-If set, power must be present when the platform is going into sleep/hibernate mode.
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
-
-&i2c2 {
-
-
-        st33zp24: st33zp24@13 {
-
-                compatible = "st,st33zp24-i2c";
-
-                reg = <0x13>;
-                clock-frequency = <400000>;
-
-                interrupt-parent = <&gpio5>;
-                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-
-                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-        };
-};

diff --git a/Bindings/security/tpm/st33zp24-spi.txt b/Bindings/security/tpm/st33zp24-spi.txt
deleted file mode 100644
index 3719897..0000000
--- a/Bindings/security/tpm/st33zp24-spi.txt
+++ /dev/null

@@ -1,32 +0,0 @@
-* STMicroelectronics SAS. ST33ZP24 TPM SoC
-
-Required properties:
-- compatible: Should be "st,st33zp24-spi".
-- spi-max-frequency: Maximum SPI frequency (<= 10000000).
-
-Optional ST33ZP24 Properties:
-- interrupts: GPIO interrupt to which the chip is connected
-- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
-If set, power must be present when the platform is going into sleep/hibernate mode.
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
-
-&mcspi4 {
-
-
-        st33zp24@0 {
-
-                compatible = "st,st33zp24-spi";
-
-                spi-max-frequency = <10000000>;
-
-                interrupt-parent = <&gpio5>;
-                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-
-                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-        };
-};

diff --git a/Bindings/security/tpm/tpm-i2c.txt b/Bindings/security/tpm/tpm-i2c.txt
deleted file mode 100644
index a65d7b7..0000000
--- a/Bindings/security/tpm/tpm-i2c.txt
+++ /dev/null

@@ -1,26 +0,0 @@
-* Device Tree Bindings for I2C based Trusted Platform Module(TPM)
-
-Required properties:
-
-- compatible     : 'manufacturer,model', eg. nuvoton,npct650
-- label          : human readable string describing the device, eg. "tpm"
-- linux,sml-base : 64-bit base address of the reserved memory allocated for
-                   the firmware event log
-- linux,sml-size : size of the memory allocated for the firmware event log
-
-Optional properties:
-
-- powered-while-suspended: present when the TPM is left powered on between
-                           suspend and resume (makes the suspend/resume
-                           callbacks do nothing).
-
-Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
-----------------------------------------------------------
-
-tpm@57 {
-	reg = <0x57>;
-	label = "tpm";
-	compatible = "nuvoton,npct650", "nuvoton,npct601";
-	linux,sml-base = <0x7f 0xfd450000>;
-	linux,sml-size = <0x10000>;
-};

diff --git a/Bindings/security/tpm/tpm_tis_mmio.txt b/Bindings/security/tpm/tpm_tis_mmio.txt
deleted file mode 100644
index 7c63044..0000000
--- a/Bindings/security/tpm/tpm_tis_mmio.txt
+++ /dev/null

@@ -1,25 +0,0 @@
-Trusted Computing Group MMIO Trusted Platform Module
-
-The TCG defines multi vendor standard for accessing a TPM chip, this
-is the standard protocol defined to access the TPM via MMIO. Typically
-this interface will be implemented over Intel's LPC bus.
-
-Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG
-publication for the specification.
-
-Required properties:
-
-- compatible: should contain a string below for the chip, followed by
-              "tcg,tpm-tis-mmio". Valid chip strings are:
-	          * "atmel,at97sc3204"
-- reg: The location of the MMIO registers, should be at least 0x5000 bytes
-- interrupts: An optional interrupt indicating command completion.
-
-Example:
-
-	tpm_tis@90000 {
-				compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
-				reg = <0x90000 0x5000>;
-				interrupt-parent = <&EIC0>;
-				interrupts = <1 2>;
-	};

diff --git a/Bindings/security/tpm/tpm_tis_spi.txt b/Bindings/security/tpm/tpm_tis_spi.txt
deleted file mode 100644
index b800667..0000000
--- a/Bindings/security/tpm/tpm_tis_spi.txt
+++ /dev/null

@@ -1,23 +0,0 @@
-Required properties:
-- compatible: should be one of the following
-    "st,st33htpm-spi"
-    "infineon,slb9670"
-    "tcg,tpm_tis-spi"
-- spi-max-frequency: Maximum SPI frequency (depends on TPMs).
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
-
-&mcspi4 {
-
-
-        tpm_tis@0 {
-
-                compatible = "tcg,tpm_tis-spi";
-
-                spi-max-frequency = <10000000>;
-        };
-};

diff --git a/Bindings/serial/arm,dcc.yaml b/Bindings/serial/arm,dcc.yaml
new file mode 100644
index 0000000..fd05893
--- /dev/null
+++ b/Bindings/serial/arm,dcc.yaml

@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/arm,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DCC (Data communication channel) serial emulation
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  ARM DCC (Data communication channel) serial emulation interface available
+  via JTAG can be also used as one of serial line tightly coupled with every
+  ARM CPU available in the system.
+
+properties:
+  compatible:
+    const: arm,dcc
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      compatible = "arm,dcc";
+    };

diff --git a/Bindings/serial/fsl,s32-linflexuart.yaml b/Bindings/serial/fsl,s32-linflexuart.yaml
index 9205399..7a10555 100644
--- a/Bindings/serial/fsl,s32-linflexuart.yaml
+++ b/Bindings/serial/fsl,s32-linflexuart.yaml

@@ -13,7 +13,7 @@
   https://www.nxp.com/webapp/Download?colCode=S32V234RM.
 
 maintainers:
-  - Chester Lin <clin@suse.com>
+  - Chester Lin <chester62515@gmail.com>
 
 allOf:
   - $ref: serial.yaml#

diff --git a/Bindings/serial/fsl-imx-uart.yaml b/Bindings/serial/fsl-imx-uart.yaml
index 8303555..9c6dc16 100644
--- a/Bindings/serial/fsl-imx-uart.yaml
+++ b/Bindings/serial/fsl-imx-uart.yaml

@@ -9,10 +9,6 @@
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
-allOf:
-  - $ref: serial.yaml#
-  - $ref: rs485.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -68,7 +64,11 @@
       - const: tx
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: UART RX Interrupt
+      - description: UART TX Interrupt
+      - description: UART RTS Interrupt
+    minItems: 1
 
   wakeup-source: true
 
@@ -110,6 +110,25 @@
   - clock-names
   - interrupts
 
+allOf:
+  - $ref: serial.yaml#
+  - $ref: rs485.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx1-uart
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:

diff --git a/Bindings/serial/qcom,msm-uartdm.yaml b/Bindings/serial/qcom,msm-uartdm.yaml
index ee52bf8..e0fa363 100644
--- a/Bindings/serial/qcom,msm-uartdm.yaml
+++ b/Bindings/serial/qcom,msm-uartdm.yaml

@@ -48,9 +48,17 @@
       - const: tx
       - const: rx
 
+  interconnects:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
   qcom,rx-crci:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -99,7 +107,9 @@
 
 examples:
   - |
+    #include <dt-bindings/interconnect/qcom,msm8996.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
 
     serial@f991e000 {
         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
@@ -109,4 +119,7 @@
         clock-names = "core", "iface";
         dmas = <&dma0 0>, <&dma0 1>;
         dma-names = "tx", "rx";
+        power-domains = <&rpmpd MSM8996_VDDCX>;
+        operating-points-v2 = <&uart_opp_table>;
+        interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>;
     };

diff --git a/Bindings/serial/renesas,sci.yaml b/Bindings/serial/renesas,sci.yaml
index 9f73052..64d3db6 100644
--- a/Bindings/serial/renesas,sci.yaml
+++ b/Bindings/serial/renesas,sci.yaml

@@ -17,7 +17,7 @@
     oneOf:
       - items:
           - enum:
-              - renesas,r9a07g043-sci     # RZ/G2UL
+              - renesas,r9a07g043-sci     # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-sci     # RZ/G2{L,LC}
               - renesas,r9a07g054-sci     # RZ/V2L
           - const: renesas,sci            # generic SCI compatible UART

diff --git a/Bindings/serial/samsung_uart.yaml b/Bindings/serial/samsung_uart.yaml
index ac60ab1..133259e 100644
--- a/Bindings/serial/samsung_uart.yaml
+++ b/Bindings/serial/samsung_uart.yaml

@@ -18,17 +18,29 @@
 properties:
   compatible:
     oneOf:
-      - items:
-          - const: samsung,exynosautov9-uart
-          - const: samsung,exynos850-uart
       - enum:
           - apple,s5l-uart
           - axis,artpec8-uart
+          - google,gs101-uart
           - samsung,s3c6400-uart
           - samsung,s5pv210-uart
           - samsung,exynos4210-uart
           - samsung,exynos5433-uart
           - samsung,exynos850-uart
+      - items:
+          - enum:
+              - samsung,exynos7-uart
+              - tesla,fsd-uart
+          - const: samsung,exynos4210-uart
+      - items:
+          - enum:
+              - samsung,exynos7885-uart
+          - const: samsung,exynos5433-uart
+      - items:
+          - enum:
+              - samsung,exynosautov9-uart
+              - samsung,exynosautov920-uart
+          - const: samsung,exynos850-uart
 
   reg:
     maxItems: 1
@@ -122,6 +134,16 @@
             - const: uart
             - const: clk_uart_baud0
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-uart
+    then:
+      required:
+        - samsung,uart-fifosize
+
 unevaluatedProperties: false
 
 examples:

diff --git a/Bindings/serial/snps-dw-apb-uart.yaml b/Bindings/serial/snps-dw-apb-uart.yaml
index 17c5531..1001d2a 100644
--- a/Bindings/serial/snps-dw-apb-uart.yaml
+++ b/Bindings/serial/snps-dw-apb-uart.yaml

@@ -11,6 +11,7 @@
 
 allOf:
   - $ref: serial.yaml#
+  - $ref: rs485.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/serial/sprd-uart.yaml b/Bindings/serial/sprd-uart.yaml
index 28ff77a..f4dbb6d 100644
--- a/Bindings/serial/sprd-uart.yaml
+++ b/Bindings/serial/sprd-uart.yaml

@@ -20,6 +20,7 @@
               - sprd,sc9860-uart
               - sprd,sc9863a-uart
               - sprd,ums512-uart
+              - sprd,ums9620-uart
           - const: sprd,sc9836-uart
       - const: sprd,sc9836-uart
 

diff --git a/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
index 16977e4..c6bce40 100644
--- a/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
+++ b/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml

@@ -158,3 +158,36 @@
             };
         };
     };
+
+  - |
+    system-controller@ff63c000 {
+        compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon";
+        reg = <0xff63c000 0x400>;
+
+        clock-controller {
+            compatible = "amlogic,axg-clkc";
+            #clock-cells = <1>;
+            clocks = <&xtal>;
+            clock-names = "xtal";
+        };
+
+        power-controller {
+           compatible = "amlogic,meson-axg-pwrc";
+           #power-domain-cells = <1>;
+           amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+           resets = <&reset_viu>,
+                    <&reset_venc>,
+                    <&reset_vcbus>,
+                    <&reset_vencl>,
+                    <&reset_vid_lock>;
+           reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
+           clocks = <&clk_vpu>, <&clk_vapb>;
+           clock-names = "vpu", "vapb";
+        };
+
+        phy {
+           compatible = "amlogic,axg-mipi-pcie-analog-phy";
+           #phy-cells = <0>;
+        };
+    };

diff --git a/Bindings/soc/mediatek/mediatek,pwrap.yaml b/Bindings/soc/mediatek/mediatek,pwrap.yaml
index a06ac21..4737e5f 100644
--- a/Bindings/soc/mediatek/mediatek,pwrap.yaml
+++ b/Bindings/soc/mediatek/mediatek,pwrap.yaml

@@ -41,7 +41,6 @@
               - mediatek,mt8173-pwrap
               - mediatek,mt8183-pwrap
               - mediatek,mt8186-pwrap
-              - mediatek,mt8188-pwrap
               - mediatek,mt8195-pwrap
               - mediatek,mt8365-pwrap
               - mediatek,mt8516-pwrap
@@ -50,6 +49,11 @@
               - mediatek,mt8186-pwrap
               - mediatek,mt8195-pwrap
           - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt8188-pwrap
+          - const: mediatek,mt8195-pwrap
+          - const: syscon
 
   reg:
     minItems: 1

diff --git a/Bindings/soc/mediatek/mtk-svs.yaml b/Bindings/soc/mediatek/mtk-svs.yaml
index 7eda63d..742b91d 100644
--- a/Bindings/soc/mediatek/mtk-svs.yaml
+++ b/Bindings/soc/mediatek/mtk-svs.yaml

@@ -22,8 +22,10 @@
   compatible:
     enum:
       - mediatek,mt8183-svs
+      - mediatek,mt8186-svs
       - mediatek,mt8188-svs
       - mediatek,mt8192-svs
+      - mediatek,mt8195-svs
 
   reg:
     maxItems: 1

diff --git a/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
index 365a9fe..a3fa04f 100644
--- a/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
+++ b/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml

@@ -26,6 +26,16 @@
   compatible:
     const: microchip,mpfs-sys-controller
 
+  microchip,bitstream-flash:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The SPI flash connected to the system controller's QSPI controller.
+      The system controller may retrieve FPGA bitstreams from this flash to
+      perform In-Application Programming (IAP) or during device initialisation
+      for Auto Update. The MSS and system controller have separate QSPI
+      controllers and this flash is connected to both. Software running in the
+      MSS can write bitstreams to the flash.
+
 required:
   - compatible
   - mboxes

diff --git a/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/Bindings/soc/qcom/qcom,aoss-qmp.yaml
index d1c7c2b..b4478f4 100644
--- a/Bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Bindings/soc/qcom/qcom,aoss-qmp.yaml

@@ -38,6 +38,8 @@
           - qcom,sm8350-aoss-qmp
           - qcom,sm8450-aoss-qmp
           - qcom,sm8550-aoss-qmp
+          - qcom,sm8650-aoss-qmp
+          - qcom,x1e80100-aoss-qmp
       - const: qcom,aoss-qmp
 
   reg:

diff --git a/Bindings/soc/qcom/qcom,pmic-glink.yaml b/Bindings/soc/qcom/qcom,pmic-glink.yaml
index 422921c..61df97f 100644
--- a/Bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Bindings/soc/qcom/qcom,pmic-glink.yaml

@@ -20,14 +20,20 @@
 
 properties:
   compatible:
-    items:
-      - enum:
-          - qcom,sc8180x-pmic-glink
-          - qcom,sc8280xp-pmic-glink
-          - qcom,sm8350-pmic-glink
-          - qcom,sm8450-pmic-glink
-          - qcom,sm8550-pmic-glink
-      - const: qcom,pmic-glink
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc8180x-pmic-glink
+              - qcom,sc8280xp-pmic-glink
+              - qcom,sm8350-pmic-glink
+              - qcom,sm8450-pmic-glink
+              - qcom,sm8550-pmic-glink
+          - const: qcom,pmic-glink
+      - items:
+          - enum:
+              - qcom,sm8650-pmic-glink
+          - const: qcom,sm8550-pmic-glink
+          - const: qcom,pmic-glink
 
   '#address-cells':
     const: 1

diff --git a/Bindings/soc/qcom/qcom-stats.yaml b/Bindings/soc/qcom/qcom-stats.yaml
index 96a7f18..686a7ef 100644
--- a/Bindings/soc/qcom/qcom-stats.yaml
+++ b/Bindings/soc/qcom/qcom-stats.yaml

@@ -31,10 +31,24 @@
   reg:
     maxItems: 1
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            const: qcom,rpmh-stats
+    then:
+      properties:
+        qcom,qmp: false
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/soc/rockchip/grf.yaml b/Bindings/soc/rockchip/grf.yaml
index 1309bf5..9793ea6 100644
--- a/Bindings/soc/rockchip/grf.yaml
+++ b/Bindings/soc/rockchip/grf.yaml

@@ -28,6 +28,8 @@
               - rockchip,rk3588-sys-grf
               - rockchip,rk3588-pcie3-phy-grf
               - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:

diff --git a/Bindings/soc/samsung/exynos-pmu.yaml b/Bindings/soc/samsung/exynos-pmu.yaml
index e1d716d..15fcd8f 100644
--- a/Bindings/soc/samsung/exynos-pmu.yaml
+++ b/Bindings/soc/samsung/exynos-pmu.yaml

@@ -15,6 +15,7 @@
     compatible:
       contains:
         enum:
+          - google,gs101-pmu
           - samsung,exynos3250-pmu
           - samsung,exynos4210-pmu
           - samsung,exynos4212-pmu
@@ -35,6 +36,7 @@
     oneOf:
       - items:
           - enum:
+              - google,gs101-pmu
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
               - samsung,exynos4212-pmu
@@ -50,6 +52,14 @@
           - const: syscon
       - items:
           - enum:
+              - samsung,exynos7885-pmu
+              - samsung,exynosautov9-pmu
+              - samsung,exynosautov920-pmu
+              - tesla,fsd-pmu
+          - const: samsung,exynos7-pmu
+          - const: syscon
+      - items:
+          - enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
               - samsung,exynos4212-pmu

diff --git a/Bindings/soc/samsung/exynos-usi.yaml b/Bindings/soc/samsung/exynos-usi.yaml
index a683690..8b478d6 100644
--- a/Bindings/soc/samsung/exynos-usi.yaml
+++ b/Bindings/soc/samsung/exynos-usi.yaml

@@ -24,7 +24,10 @@
   compatible:
     oneOf:
       - items:
-          - const: samsung,exynosautov9-usi
+          - enum:
+              - google,gs101-usi
+              - samsung,exynosautov9-usi
+              - samsung,exynosautov920-usi
           - const: samsung,exynos850-usi
       - enum:
           - samsung,exynos850-usi
@@ -155,7 +158,7 @@
         };
 
         hsi2c_0: i2c@13820000 {
-            compatible = "samsung,exynosautov9-hsi2c";
+            compatible = "samsung,exynos850-hsi2c", "samsung,exynosautov9-hsi2c";
             reg = <0x13820000 0xc0>;
             interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
             #address-cells = <1>;

diff --git a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
index 163e912..1794e37 100644
--- a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
+++ b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml

@@ -14,9 +14,14 @@
     oneOf:
       - items:
           - enum:
+              - google,gs101-apm-sysreg
+              - google,gs101-peric0-sysreg
+              - google,gs101-peric1-sysreg
               - samsung,exynos3-sysreg
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
+              - samsung,exynosautov920-peric0-sysreg
+              - samsung,exynosautov920-peric1-sysreg
               - tesla,fsd-cam-sysreg
               - tesla,fsd-fsys0-sysreg
               - tesla,fsd-fsys1-sysreg

diff --git a/Bindings/arm/xilinx.yaml b/Bindings/soc/xilinx/xilinx.yaml
similarity index 95%
rename from Bindings/arm/xilinx.yaml
rename to Bindings/soc/xilinx/xilinx.yaml
index f57ed03..d4c0fe1 100644
--- a/Bindings/arm/xilinx.yaml
+++ b/Bindings/soc/xilinx/xilinx.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/xilinx.yaml#
+$id: http://devicetree.org/schemas/soc/xilinx/xilinx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xilinx Zynq Platforms
@@ -132,6 +132,11 @@
           - const: xlnx,zynqmp-smk-k26
           - const: xlnx,zynqmp
 
+      - description: AMD MicroBlaze V (QEMU)
+        items:
+          - const: qemu,mbv
+          - const: amd,mbv
+
 additionalProperties: true
 
 ...

diff --git a/Bindings/sound/adi,max98363.yaml b/Bindings/sound/adi,max98363.yaml
index a844b63..c388cda 100644
--- a/Bindings/sound/adi,max98363.yaml
+++ b/Bindings/sound/adi,max98363.yaml

@@ -39,7 +39,7 @@
 
 examples:
   - |
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
         reg = <0x3250000 0x2000>;

diff --git a/Bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Bindings/sound/allwinner,sun4i-a10-spdif.yaml
index 8108c56..aa32dc9 100644
--- a/Bindings/sound/allwinner,sun4i-a10-spdif.yaml
+++ b/Bindings/sound/allwinner,sun4i-a10-spdif.yaml

@@ -22,6 +22,7 @@
       - const: allwinner,sun6i-a31-spdif
       - const: allwinner,sun8i-h3-spdif
       - const: allwinner,sun50i-h6-spdif
+      - const: allwinner,sun50i-h616-spdif
       - items:
           - const: allwinner,sun8i-a83t-spdif
           - const: allwinner,sun8i-h3-spdif
@@ -62,6 +63,8 @@
             enum:
               - allwinner,sun6i-a31-spdif
               - allwinner,sun8i-h3-spdif
+              - allwinner,sun50i-h6-spdif
+              - allwinner,sun50i-h616-spdif
 
     then:
       required:
@@ -73,7 +76,7 @@
           contains:
             enum:
               - allwinner,sun8i-h3-spdif
-              - allwinner,sun50i-h6-spdif
+              - allwinner,sun50i-h616-spdif
 
     then:
       properties:

diff --git a/Bindings/sound/audio-graph-port.yaml b/Bindings/sound/audio-graph-port.yaml
index 60b5e3f..b13c08d 100644
--- a/Bindings/sound/audio-graph-port.yaml
+++ b/Bindings/sound/audio-graph-port.yaml

@@ -19,6 +19,12 @@
     properties:
       mclk-fs:
         $ref: simple-card.yaml#/definitions/mclk-fs
+      playback-only:
+        description: port connection used only for playback
+        $ref: /schemas/types.yaml#/definitions/flag
+      capture-only:
+        description: port connection used only for capture
+        $ref: /schemas/types.yaml#/definitions/flag
 
   endpoint-base:
     allOf:

diff --git a/Bindings/sound/es8328.txt b/Bindings/sound/es8328.txt
deleted file mode 100644
index 33fbf05..0000000
--- a/Bindings/sound/es8328.txt
+++ /dev/null

@@ -1,38 +0,0 @@
-Everest ES8328 audio CODEC
-
-This device supports both I2C and SPI.
-
-Required properties:
-
-  - compatible  : Should be "everest,es8328" or "everest,es8388"
-  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
-  - AVDD-supply : Regulator providing analog supply voltage 3.3V
-  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
-  - IPVDD-supply : Regulator providing analog output voltage 3.3V
-  - clocks : A 22.5792 or 11.2896 MHz clock
-  - reg : the I2C address of the device for I2C, the chip select number for SPI
-
-Pins on the device (for linking into audio routes):
-
-  * LOUT1
-  * LOUT2
-  * ROUT1
-  * ROUT2
-  * LINPUT1
-  * RINPUT1
-  * LINPUT2
-  * RINPUT2
-  * Mic Bias
-
-
-Example:
-
-codec: es8328@11 {
-	compatible = "everest,es8328";
-	DVDD-supply = <&reg_3p3v>;
-	AVDD-supply = <&reg_3p3v>;
-	PVDD-supply = <&reg_3p3v>;
-	HPVDD-supply = <&reg_3p3v>;
-	clocks = <&clks 169>;
-	reg = <0x11>;
-};

diff --git a/Bindings/sound/everest,es8328.yaml b/Bindings/sound/everest,es8328.yaml
new file mode 100644
index 0000000..a0f4670
--- /dev/null
+++ b/Bindings/sound/everest,es8328.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8328 audio CODEC
+
+description:
+  Everest Audio Codec, which can be connected via I2C or SPI.
+  Pins on the device (for linking into audio routes) are
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    enum:
+      - everest,es8328
+      - everest,es8388
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: A 22.5792 or 11.2896 MHz clock
+
+  DVDD-supply:
+    description: Regulator providing digital core supply voltage 1.8 - 3.6V
+
+  AVDD-supply:
+    description: Regulator providing analog supply voltage 3.3V
+
+  PVDD-supply:
+    description: Regulator providing digital IO supply voltage 1.8 - 3.6V
+
+  HPVDD-supply:
+    description: Regulator providing analog output voltage 3.3V
+
+required:
+  - compatible
+  - clocks
+  - DVDD-supply
+  - AVDD-supply
+  - PVDD-supply
+  - HPVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8328: codec@11 {
+        compatible = "everest,es8328";
+        reg = <0x11>;
+        AVDD-supply = <&reg_3p3v>;
+        DVDD-supply = <&reg_3p3v>;
+        HPVDD-supply = <&reg_3p3v>;
+        PVDD-supply = <&reg_3p3v>;
+        clocks = <&clks 169>;
+      };
+    };

diff --git a/Bindings/sound/fsl,mqs.txt b/Bindings/sound/fsl,mqs.txt
deleted file mode 100644
index d66284b..0000000
--- a/Bindings/sound/fsl,mqs.txt
+++ /dev/null

@@ -1,36 +0,0 @@
-fsl,mqs audio CODEC
-
-Required properties:
-  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
-		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
-  - clocks : A list of phandles + clock-specifiers, one for each entry in
-	     clock-names
-  - clock-names : "mclk" - must required.
-		  "core" - required if compatible is "fsl,imx8qm-mqs", it
-		           is for register access.
-  - gpr : A phandle of General Purpose Registers in IOMUX Controller.
-	  Required if compatible is "fsl,imx6sx-mqs".
-
-Required if compatible is "fsl,imx8qm-mqs":
-  - power-domains: A phandle of PM domain provider node.
-  - reg: Offset and length of the register set for the device.
-
-Example:
-
-mqs: mqs {
-	compatible = "fsl,imx6sx-mqs";
-	gpr = <&gpr>;
-	clocks = <&clks IMX6SX_CLK_SAI1>;
-	clock-names = "mclk";
-	status = "disabled";
-};
-
-mqs: mqs@59850000 {
-	compatible = "fsl,imx8qm-mqs";
-	reg = <0x59850000 0x10000>;
-	clocks = <&clk IMX8QM_AUD_MQS_IPG>,
-		 <&clk IMX8QM_AUD_MQS_HMCLK>;
-	clock-names = "core", "mclk";
-	power-domains = <&pd_mqs0>;
-	status = "disabled";
-};

diff --git a/Bindings/sound/fsl,mqs.yaml b/Bindings/sound/fsl,mqs.yaml
new file mode 100644
index 0000000..8b33353
--- /dev/null
+++ b/Bindings/sound/fsl,mqs.yaml

@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,mqs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Medium Quality Sound (MQS)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+  - Chancel Liu <chancel.liu@nxp.com>
+
+description: |
+  Medium quality sound (MQS) is used to generate medium quality audio
+  via a standard GPIO in the pinmux, allowing the user to connect
+  stereo speakers or headphones to a power amplifier without an
+  additional DAC chip.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mqs
+      - fsl,imx8qm-mqs
+      - fsl,imx8qxp-mqs
+      - fsl,imx93-mqs
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-mqs
+              - fsl,imx8qxp-mqs
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+            - description: Clock for register access
+        clock-names:
+          items:
+            - const: mclk
+            - const: core
+      required:
+        - reg
+        - power-domains
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+        clock-names:
+          items:
+            - const: mclk
+      required:
+        - gpr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    mqs0: mqs {
+        compatible = "fsl,imx6sx-mqs";
+        gpr = <&gpr>;
+        clocks = <&clks IMX6SX_CLK_SAI1>;
+        clock-names = "mclk";
+    };
+
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mqs1: mqs@59850000 {
+        compatible = "fsl,imx8qm-mqs";
+        reg = <0x59850000 0x10000>;
+        clocks = <&mqs0_lpcg 0>, <&mqs0_lpcg 1>;
+        clock-names = "mclk", "core";
+        power-domains = <&pd IMX_SC_R_MQS_0>;
+    };

diff --git a/Bindings/sound/fsl,xcvr.yaml b/Bindings/sound/fsl,xcvr.yaml
index 799b362..0eb0c1b 100644
--- a/Bindings/sound/fsl,xcvr.yaml
+++ b/Bindings/sound/fsl,xcvr.yaml

@@ -38,7 +38,10 @@
       - const: txfifo
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: WAKEUPMIX Audio XCVR Interrupt 1
+      - description: WAKEUPMIX Audio XCVR Interrupt 2
+    minItems: 1
 
   clocks:
     items:
@@ -78,6 +81,23 @@
   - dma-names
   - resets
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx93-xcvr
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/sound/google,sc7280-herobrine.yaml b/Bindings/sound/google,sc7280-herobrine.yaml
index ec4b6e5..cdcd7c6 100644
--- a/Bindings/sound/google,sc7280-herobrine.yaml
+++ b/Bindings/sound/google,sc7280-herobrine.yaml

@@ -7,7 +7,6 @@
 title: Google SC7280-Herobrine ASoC sound card driver
 
 maintainers:
-  - Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
   - Judy Hsiao <judyhsiao@chromium.org>
 
 description:

diff --git a/Bindings/sound/mediatek,mt2701-audio.yaml b/Bindings/sound/mediatek,mt2701-audio.yaml
new file mode 100644
index 0000000..45382c4
--- /dev/null
+++ b/Bindings/sound/mediatek,mt2701-audio.yaml

@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt2701-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Audio Front End (AFE) PCM controller for mt2701
+
+description:
+  The AFE PCM node must be a subnode of the MediaTek audsys device tree node.
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-audio
+      - mediatek,mt7622-audio
+
+  interrupts:
+    items:
+      - description: AFE interrupt
+      - description: ASYS interrupt
+
+  interrupt-names:
+    items:
+      - const: afe
+      - const: asys
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: audio infra sys clock
+      - description: top audio mux 1
+      - description: top audio mux 2
+      - description: top audio sys a1 clock
+      - description: top audio sys a2 clock
+      - description: i2s0 source selection
+      - description: i2s1 source selection
+      - description: i2s2 source selection
+      - description: i2s3 source selection
+      - description: i2s0 source divider
+      - description: i2s1 source divider
+      - description: i2s2 source divider
+      - description: i2s3 source divider
+      - description: i2s0 master clock
+      - description: i2s1 master clock
+      - description: i2s2 master clock
+      - description: i2s3 master clock
+      - description: i2so0 hopping clock
+      - description: i2so1 hopping clock
+      - description: i2so2 hopping clock
+      - description: i2so3 hopping clock
+      - description: i2si0 hopping clock
+      - description: i2si1 hopping clock
+      - description: i2si2 hopping clock
+      - description: i2si3 hopping clock
+      - description: asrc0 output clock
+      - description: asrc1 output clock
+      - description: asrc2 output clock
+      - description: asrc3 output clock
+      - description: audio front end pd clock
+      - description: audio front end conn pd clock
+      - description: top audio a1 sys pd
+      - description: top audio a2 sys pd
+      - description: audio merge interface pd
+
+  clock-names:
+    items:
+      - const: infra_sys_audio_clk
+      - const: top_audio_mux1_sel
+      - const: top_audio_mux2_sel
+      - const: top_audio_a1sys_hp
+      - const: top_audio_a2sys_hp
+      - const: i2s0_src_sel
+      - const: i2s1_src_sel
+      - const: i2s2_src_sel
+      - const: i2s3_src_sel
+      - const: i2s0_src_div
+      - const: i2s1_src_div
+      - const: i2s2_src_div
+      - const: i2s3_src_div
+      - const: i2s0_mclk_en
+      - const: i2s1_mclk_en
+      - const: i2s2_mclk_en
+      - const: i2s3_mclk_en
+      - const: i2so0_hop_ck
+      - const: i2so1_hop_ck
+      - const: i2so2_hop_ck
+      - const: i2so3_hop_ck
+      - const: i2si0_hop_ck
+      - const: i2si1_hop_ck
+      - const: i2si2_hop_ck
+      - const: i2si3_hop_ck
+      - const: asrc0_out_ck
+      - const: asrc1_out_ck
+      - const: asrc2_out_ck
+      - const: asrc3_out_ck
+      - const: audio_afe_pd
+      - const: audio_afe_conn_pd
+      - const: audio_a1sys_pd
+      - const: audio_a2sys_pd
+      - const: audio_mrgif_pd
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false

diff --git a/Bindings/sound/mediatek,mt8188-mt6359.yaml b/Bindings/sound/mediatek,mt8188-mt6359.yaml
index 4c8c950..f94ad07 100644
--- a/Bindings/sound/mediatek,mt8188-mt6359.yaml
+++ b/Bindings/sound/mediatek,mt8188-mt6359.yaml

@@ -15,6 +15,7 @@
 properties:
   compatible:
     enum:
+      - mediatek,mt8188-es8326
       - mediatek,mt8188-mt6359-evb
       - mediatek,mt8188-nau8825
       - mediatek,mt8188-rt5682s

diff --git a/Bindings/sound/mt2701-afe-pcm.txt b/Bindings/sound/mt2701-afe-pcm.txt
deleted file mode 100644
index f548e6a..0000000
--- a/Bindings/sound/mt2701-afe-pcm.txt
+++ /dev/null

@@ -1,146 +0,0 @@
-Mediatek AFE PCM controller for mt2701
-
-Required properties:
-- compatible: should be one of the following.
-	      - "mediatek,mt2701-audio"
-	      - "mediatek,mt7622-audio"
-- interrupts: should contain AFE and ASYS interrupts
-- interrupt-names: should be "afe" and "asys"
-- power-domains: should define the power domain
-- clocks: Must contain an entry for each entry in clock-names
-  See ../clocks/clock-bindings.txt for details
-- clock-names: should have these clock names:
-		"infra_sys_audio_clk",
-		"top_audio_mux1_sel",
-		"top_audio_mux2_sel",
-		"top_audio_a1sys_hp",
-		"top_audio_a2sys_hp",
-		"i2s0_src_sel",
-		"i2s1_src_sel",
-		"i2s2_src_sel",
-		"i2s3_src_sel",
-		"i2s0_src_div",
-		"i2s1_src_div",
-		"i2s2_src_div",
-		"i2s3_src_div",
-		"i2s0_mclk_en",
-		"i2s1_mclk_en",
-		"i2s2_mclk_en",
-		"i2s3_mclk_en",
-		"i2so0_hop_ck",
-		"i2so1_hop_ck",
-		"i2so2_hop_ck",
-		"i2so3_hop_ck",
-		"i2si0_hop_ck",
-		"i2si1_hop_ck",
-		"i2si2_hop_ck",
-		"i2si3_hop_ck",
-		"asrc0_out_ck",
-		"asrc1_out_ck",
-		"asrc2_out_ck",
-		"asrc3_out_ck",
-		"audio_afe_pd",
-		"audio_afe_conn_pd",
-		"audio_a1sys_pd",
-		"audio_a2sys_pd",
-		"audio_mrgif_pd";
-- assigned-clocks: list of input clocks and dividers for the audio system.
-		   See ../clocks/clock-bindings.txt for details.
-- assigned-clocks-parents: parent of input clocks of assigned clocks.
-- assigned-clock-rates: list of clock frequencies of assigned clocks.
-
-Must be a subnode of MediaTek audsys device tree node.
-See ../arm/mediatek/mediatek,audsys.txt for details about the parent node.
-
-Example:
-
-	audsys: audio-subsystem@11220000 {
-		compatible = "mediatek,mt2701-audsys", "syscon";
-		...
-
-		afe: audio-controller {
-			compatible = "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
-			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
-			clocks = <&infracfg CLK_INFRA_AUDIO>,
-				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-				 <&audsys CLK_AUD_I2SO1>,
-				 <&audsys CLK_AUD_I2SO2>,
-				 <&audsys CLK_AUD_I2SO3>,
-				 <&audsys CLK_AUD_I2SO4>,
-				 <&audsys CLK_AUD_I2SIN1>,
-				 <&audsys CLK_AUD_I2SIN2>,
-				 <&audsys CLK_AUD_I2SIN3>,
-				 <&audsys CLK_AUD_I2SIN4>,
-				 <&audsys CLK_AUD_ASRCO1>,
-				 <&audsys CLK_AUD_ASRCO2>,
-				 <&audsys CLK_AUD_ASRCO3>,
-				 <&audsys CLK_AUD_ASRCO4>,
-				 <&audsys CLK_AUD_AFE>,
-				 <&audsys CLK_AUD_AFE_CONN>,
-				 <&audsys CLK_AUD_A1SYS>,
-				 <&audsys CLK_AUD_A2SYS>,
-				 <&audsys CLK_AUD_AFE_MRGIF>;
-
-			clock-names = "infra_sys_audio_clk",
-				      "top_audio_mux1_sel",
-				      "top_audio_mux2_sel",
-				      "top_audio_a1sys_hp",
-				      "top_audio_a2sys_hp",
-				      "i2s0_src_sel",
-				      "i2s1_src_sel",
-				      "i2s2_src_sel",
-				      "i2s3_src_sel",
-				      "i2s0_src_div",
-				      "i2s1_src_div",
-				      "i2s2_src_div",
-				      "i2s3_src_div",
-				      "i2s0_mclk_en",
-				      "i2s1_mclk_en",
-				      "i2s2_mclk_en",
-				      "i2s3_mclk_en",
-				      "i2so0_hop_ck",
-				      "i2so1_hop_ck",
-				      "i2so2_hop_ck",
-				      "i2so3_hop_ck",
-				      "i2si0_hop_ck",
-				      "i2si1_hop_ck",
-				      "i2si2_hop_ck",
-				      "i2si3_hop_ck",
-				      "asrc0_out_ck",
-				      "asrc1_out_ck",
-				      "asrc2_out_ck",
-				      "asrc3_out_ck",
-				      "audio_afe_pd",
-				      "audio_afe_conn_pd",
-				      "audio_a1sys_pd",
-				      "audio_a2sys_pd",
-				      "audio_mrgif_pd";
-
-			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
-			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
-						 <&topckgen CLK_TOP_AUD2PLL_90M>;
-			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
-		};
-	};

diff --git a/Bindings/sound/nuvoton,nau8821.yaml b/Bindings/sound/nuvoton,nau8821.yaml
index 3e54abd..054b539 100644
--- a/Bindings/sound/nuvoton,nau8821.yaml
+++ b/Bindings/sound/nuvoton,nau8821.yaml

@@ -89,6 +89,14 @@
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 3072000
 
+  nuvoton,dmic-slew-rate:
+    description: The range 0 to 7 represents the speed of DMIC slew rate.
+        The lowest value 0 means the slowest rate and the highest value
+        7 means the fastest rate.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
   nuvoton,left-input-single-end:
     description: Enable left input with single-ended settings if set.
         For the headset mic application, the single-ended control is
@@ -127,6 +135,7 @@
             nuvoton,jack-insert-debounce = <7>;
             nuvoton,jack-eject-debounce = <0>;
             nuvoton,dmic-clk-threshold = <3072000>;
+            nuvoton,dmic-slew-rate = <0>;
             #sound-dai-cells = <0>;
         };
     };

diff --git a/Bindings/sound/nvidia,tegra-audio-max9808x.yaml b/Bindings/sound/nvidia,tegra-audio-max9808x.yaml
index c29d794..241d20f 100644
--- a/Bindings/sound/nvidia,tegra-audio-max9808x.yaml
+++ b/Bindings/sound/nvidia,tegra-audio-max9808x.yaml

@@ -64,7 +64,7 @@
     #include <dt-bindings/clock/tegra30-car.h>
     #include <dt-bindings/soc/tegra-pmc.h>
     sound {
-        compatible = "lge,tegra-audio-max98089-p895",
+        compatible = "lg,tegra-audio-max98089-p895",
                      "nvidia,tegra-audio-max98089";
         nvidia,model = "LG Optimus Vu MAX98089";
 

diff --git a/Bindings/sound/qcom,lpass-rx-macro.yaml b/Bindings/sound/qcom,lpass-rx-macro.yaml
index ec4b0ac..b8540b3 100644
--- a/Bindings/sound/qcom,lpass-rx-macro.yaml
+++ b/Bindings/sound/qcom,lpass-rx-macro.yaml

@@ -11,12 +11,18 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-rx-macro
-      - qcom,sm8250-lpass-rx-macro
-      - qcom,sm8450-lpass-rx-macro
-      - qcom,sm8550-lpass-rx-macro
-      - qcom,sc8280xp-lpass-rx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-rx-macro
+          - qcom,sm8250-lpass-rx-macro
+          - qcom,sm8450-lpass-rx-macro
+          - qcom,sm8550-lpass-rx-macro
+          - qcom,sc8280xp-lpass-rx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-rx-macro
+              - qcom,x1e80100-lpass-rx-macro
+          - const: qcom,sm8550-lpass-rx-macro
 
   reg:
     maxItems: 1
@@ -96,8 +102,9 @@
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-rx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-rx-macro
     then:
       properties:
         clocks:

diff --git a/Bindings/sound/qcom,lpass-tx-macro.yaml b/Bindings/sound/qcom,lpass-tx-macro.yaml
index 962701e..3e2ae16 100644
--- a/Bindings/sound/qcom,lpass-tx-macro.yaml
+++ b/Bindings/sound/qcom,lpass-tx-macro.yaml

@@ -11,13 +11,19 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-tx-macro
-      - qcom,sm6115-lpass-tx-macro
-      - qcom,sm8250-lpass-tx-macro
-      - qcom,sm8450-lpass-tx-macro
-      - qcom,sm8550-lpass-tx-macro
-      - qcom,sc8280xp-lpass-tx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-tx-macro
+          - qcom,sm6115-lpass-tx-macro
+          - qcom,sm8250-lpass-tx-macro
+          - qcom,sm8450-lpass-tx-macro
+          - qcom,sm8550-lpass-tx-macro
+          - qcom,sc8280xp-lpass-tx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-tx-macro
+              - qcom,x1e80100-lpass-tx-macro
+          - const: qcom,sm8550-lpass-tx-macro
 
   reg:
     maxItems: 1
@@ -118,8 +124,9 @@
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-tx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-tx-macro
     then:
       properties:
         clocks:

diff --git a/Bindings/sound/qcom,lpass-va-macro.yaml b/Bindings/sound/qcom,lpass-va-macro.yaml
index 4a56108..6b483fa 100644
--- a/Bindings/sound/qcom,lpass-va-macro.yaml
+++ b/Bindings/sound/qcom,lpass-va-macro.yaml

@@ -11,12 +11,18 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-va-macro
-      - qcom,sm8250-lpass-va-macro
-      - qcom,sm8450-lpass-va-macro
-      - qcom,sm8550-lpass-va-macro
-      - qcom,sc8280xp-lpass-va-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-va-macro
+          - qcom,sm8250-lpass-va-macro
+          - qcom,sm8450-lpass-va-macro
+          - qcom,sm8550-lpass-va-macro
+          - qcom,sc8280xp-lpass-va-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-va-macro
+              - qcom,x1e80100-lpass-va-macro
+          - const: qcom,sm8550-lpass-va-macro
 
   reg:
     maxItems: 1

diff --git a/Bindings/sound/qcom,lpass-wsa-macro.yaml b/Bindings/sound/qcom,lpass-wsa-macro.yaml
index eea7609..06b5f7b 100644
--- a/Bindings/sound/qcom,lpass-wsa-macro.yaml
+++ b/Bindings/sound/qcom,lpass-wsa-macro.yaml

@@ -11,12 +11,18 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-wsa-macro
-      - qcom,sm8250-lpass-wsa-macro
-      - qcom,sm8450-lpass-wsa-macro
-      - qcom,sm8550-lpass-wsa-macro
-      - qcom,sc8280xp-lpass-wsa-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-wsa-macro
+          - qcom,sm8250-lpass-wsa-macro
+          - qcom,sm8450-lpass-wsa-macro
+          - qcom,sm8550-lpass-wsa-macro
+          - qcom,sc8280xp-lpass-wsa-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-wsa-macro
+              - qcom,x1e80100-lpass-wsa-macro
+          - const: qcom,sm8550-lpass-wsa-macro
 
   reg:
     maxItems: 1
@@ -94,8 +100,9 @@
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-wsa-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-wsa-macro
     then:
       properties:
         clocks:

diff --git a/Bindings/sound/qcom,sm8250.yaml b/Bindings/sound/qcom,sm8250.yaml
index e082a4f..6f41974 100644
--- a/Bindings/sound/qcom,sm8250.yaml
+++ b/Bindings/sound/qcom,sm8250.yaml

@@ -21,6 +21,11 @@
               - lenovo,yoga-c630-sndcard
               - qcom,db845c-sndcard
           - const: qcom,sdm845-sndcard
+      - items:
+          - enum:
+              - qcom,sm8550-sndcard
+              - qcom,sm8650-sndcard
+          - const: qcom,sm8450-sndcard
       - enum:
           - qcom,apq8016-sbc-sndcard
           - qcom,msm8916-qdsp6-sndcard
@@ -30,6 +35,7 @@
           - qcom,sdm845-sndcard
           - qcom,sm8250-sndcard
           - qcom,sm8450-sndcard
+          - qcom,x1e80100-sndcard
 
   audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array

diff --git a/Bindings/sound/qcom,wcd934x.yaml b/Bindings/sound/qcom,wcd934x.yaml
index 4df59f3..beb0ff0 100644
--- a/Bindings/sound/qcom,wcd934x.yaml
+++ b/Bindings/sound/qcom,wcd934x.yaml

@@ -201,9 +201,9 @@
   - |
     codec@1,0{
         compatible = "slim217,250";
-        reg  = <1 0>;
+        reg = <1 0>;
         reset-gpios = <&tlmm 64 0>;
-        slim-ifc-dev  = <&wcd9340_ifd>;
+        slim-ifc-dev = <&wcd9340_ifd>;
         #sound-dai-cells = <1>;
         interrupt-parent = <&tlmm>;
         interrupts = <54 4>;

diff --git a/Bindings/sound/qcom,wcd938x-sdw.yaml b/Bindings/sound/qcom,wcd938x-sdw.yaml
index b430dd3..7b31bf9 100644
--- a/Bindings/sound/qcom,wcd938x-sdw.yaml
+++ b/Bindings/sound/qcom,wcd938x-sdw.yaml

@@ -51,7 +51,7 @@
         reg = <0x03210000 0x2000>;
         wcd938x_rx: codec@0,4 {
             compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
         };
     };
@@ -62,7 +62,7 @@
         reg = <0x03230000 0x2000>;
         wcd938x_tx: codec@0,3 {
             compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
             qcom,tx-port-mapping = <2 3 4 5>;
         };
     };

diff --git a/Bindings/sound/qcom,wcd938x.yaml b/Bindings/sound/qcom,wcd938x.yaml
index 0185657..adbfa67 100644
--- a/Bindings/sound/qcom,wcd938x.yaml
+++ b/Bindings/sound/qcom,wcd938x.yaml

@@ -137,7 +137,7 @@
         reg = <0x03210000 0x2000>;
         wcd938x_rx: codec@0,4 {
             compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
         };
     };
@@ -148,7 +148,7 @@
         reg = <0x03230000 0x2000>;
         wcd938x_tx: codec@0,3 {
             compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
             qcom,tx-port-mapping = <2 3 4 5>;
         };
     };

diff --git a/Bindings/sound/qcom,wsa883x.yaml b/Bindings/sound/qcom,wsa883x.yaml
index ba572a7..8e462cd 100644
--- a/Bindings/sound/qcom,wsa883x.yaml
+++ b/Bindings/sound/qcom,wsa883x.yaml

@@ -52,7 +52,7 @@
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
         reg = <0x3250000 0x2000>;

diff --git a/Bindings/sound/qcom,wsa8840.yaml b/Bindings/sound/qcom,wsa8840.yaml
index e6723c9..d717017 100644
--- a/Bindings/sound/qcom,wsa8840.yaml
+++ b/Bindings/sound/qcom,wsa8840.yaml

@@ -48,7 +48,7 @@
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    soundwire-controller {
+    soundwire {
         #address-cells = <2>;
         #size-cells = <0>;
 

diff --git a/Bindings/sound/renesas,rsnd.yaml b/Bindings/sound/renesas,rsnd.yaml
index 13a5a0a..0d7a6b5 100644
--- a/Bindings/sound/renesas,rsnd.yaml
+++ b/Bindings/sound/renesas,rsnd.yaml

@@ -9,20 +9,6 @@
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
-definitions:
-  port-def:
-    $ref: audio-graph-port.yaml#/definitions/port-base
-    unevaluatedProperties: false
-    patternProperties:
-      "^endpoint(@[0-9a-f]+)?":
-        $ref: audio-graph-port.yaml#/definitions/endpoint-base
-        properties:
-          playback:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-          capture:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-        unevaluatedProperties: false
-
 properties:
 
   compatible:
@@ -125,7 +111,17 @@
 
   # ports is below
   port:
-    $ref: "#/definitions/port-def"
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: audio-graph-port.yaml#/definitions/endpoint-base
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        unevaluatedProperties: false
 
   rcar_sound,dvc:
     description: DVC subnode.
@@ -269,7 +265,7 @@
     unevaluatedProperties: false
     patternProperties:
       '^port(@[0-9a-f]+)?$':
-        $ref: "#/definitions/port-def"
+        $ref: "#/properties/port"
 
 required:
   - compatible
@@ -501,19 +497,19 @@
         rcar_sound,dai {
             dai0 {
                 playback = <&ssi5>, <&src5>;
-                capture  = <&ssi6>;
+                capture = <&ssi6>;
             };
             dai1 {
                 playback = <&ssi3>;
             };
             dai2 {
-                capture  = <&ssi4>;
+                capture = <&ssi4>;
             };
             dai3 {
                 playback = <&ssi7>;
             };
             dai4 {
-                capture  = <&ssi8>;
+                capture = <&ssi8>;
             };
         };
 
@@ -527,7 +523,7 @@
                 frame-master = <&rsnd_endpoint0>;
 
                 playback = <&ssi0>, <&src0>, <&dvc0>;
-                capture  = <&ssi1>, <&src1>, <&dvc1>;
+                capture = <&ssi1>, <&src1>, <&dvc1>;
             };
         };
     };

diff --git a/Bindings/sound/renesas,rz-ssi.yaml b/Bindings/sound/renesas,rz-ssi.yaml
index 3b5ae45..8b9695f 100644
--- a/Bindings/sound/renesas,rz-ssi.yaml
+++ b/Bindings/sound/renesas,rz-ssi.yaml

@@ -16,7 +16,7 @@
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-ssi  # RZ/G2UL
+          - renesas,r9a07g043-ssi  # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
           - renesas,r9a07g054-ssi  # RZ/V2L
       - const: renesas,rz-ssi

diff --git a/Bindings/sound/samsung-i2s.yaml b/Bindings/sound/samsung-i2s.yaml
index 30b3b6e..f45f73b 100644
--- a/Bindings/sound/samsung-i2s.yaml
+++ b/Bindings/sound/samsung-i2s.yaml

@@ -44,13 +44,18 @@
       frequencies supported by Exynos7 I2S and 7.1 channel TDM support
       for playback and capture TDM (Time division multiplexing) to allow
       transfer of multiple channel audio data on single data line.
-    enum:
-      - samsung,s3c6410-i2s
-      - samsung,s5pv210-i2s
-      - samsung,exynos5420-i2s
-      - samsung,exynos7-i2s
-      - samsung,exynos7-i2s1
-      - tesla,fsd-i2s
+    oneOf:
+      - enum:
+          - samsung,s3c6410-i2s
+          - samsung,s5pv210-i2s
+          - samsung,exynos5420-i2s
+          - samsung,exynos7-i2s
+          - samsung,exynos7-i2s1
+          - tesla,fsd-i2s
+      - items:
+          - enum:
+              - samsung,exynos5433-i2s
+          - const: samsung,exynos7-i2s
 
   '#address-cells':
     const: 1

diff --git a/Bindings/sound/sound-card-common.yaml b/Bindings/sound/sound-card-common.yaml
index 3a94117..721950f 100644
--- a/Bindings/sound/sound-card-common.yaml
+++ b/Bindings/sound/sound-card-common.yaml

@@ -17,6 +17,13 @@
       pair of strings, the first being the connection's sink, the second
       being the connection's source.
 
+  ignore-suspend-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of audio sound widgets which are marked ignoring system suspend.
+      Paths between these endpoints are still active over suspend of the main
+      application processor that the current operating system is running.
+
   model:
     $ref: /schemas/types.yaml#/definitions/string
     description: User specified audio sound card name

diff --git a/Bindings/sound/tas2562.yaml b/Bindings/sound/tas2562.yaml
index f01c0dd..d28c102 100644
--- a/Bindings/sound/tas2562.yaml
+++ b/Bindings/sound/tas2562.yaml

@@ -18,7 +18,6 @@
 
   Specifications about the audio amplifier can be found at:
     https://www.ti.com/lit/gpn/tas2562
-    https://www.ti.com/lit/gpn/tas2563
     https://www.ti.com/lit/gpn/tas2564
     https://www.ti.com/lit/gpn/tas2110
 
@@ -29,7 +28,6 @@
   compatible:
     enum:
       - ti,tas2562
-      - ti,tas2563
       - ti,tas2564
       - ti,tas2110
 

diff --git a/Bindings/sound/ti,tas2781.yaml b/Bindings/sound/ti,tas2781.yaml
index a69e6c2..9762386 100644
--- a/Bindings/sound/ti,tas2781.yaml
+++ b/Bindings/sound/ti,tas2781.yaml

@@ -5,36 +5,46 @@
 $id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments TAS2781 SmartAMP
+title: Texas Instruments TAS2563/TAS2781 SmartAMP
 
 maintainers:
   - Shenghao Ding <shenghao-ding@ti.com>
 
-description:
-  The TAS2781 is a mono, digital input Class-D audio amplifier
-  optimized for efficiently driving high peak power into small
-  loudspeakers. An integrated on-chip DSP supports Texas Instruments
-  Smart Amp speaker protection algorithm. The integrated speaker
-  voltage and current sense provides for real time
+description: |
+  The TAS2563/TAS2781 is a mono, digital input Class-D audio
+  amplifier optimized for efficiently driving high peak power into
+  small loudspeakers. An integrated on-chip DSP supports Texas
+  Instruments Smart Amp speaker protection algorithm. The
+  integrated speaker voltage and current sense provides for real time
   monitoring of loudspeaker behavior.
 
-allOf:
-  - $ref: dai-common.yaml#
+  Specifications about the audio amplifier can be found at:
+    https://www.ti.com/lit/gpn/tas2563
+    https://www.ti.com/lit/gpn/tas2781
 
 properties:
   compatible:
-    enum:
-      - ti,tas2781
+    description: |
+      ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated
+      DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM.
+
+      ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker
+      Protection and Audio Processing, 16/20/24/32bit stereo I2S or
+      multichannel TDM.
+    oneOf:
+      - items:
+          - enum:
+              - ti,tas2563
+          - const: ti,tas2781
+      - enum:
+          - ti,tas2781
 
   reg:
     description:
-      I2C address, in multiple tas2781s case, all the i2c address
+      I2C address, in multiple-AMP case, all the i2c address
       aggregate as one Audio Device to support multiple audio slots.
     maxItems: 8
     minItems: 1
-    items:
-      minimum: 0x38
-      maximum: 0x3f
 
   reset-gpios:
     maxItems: 1
@@ -49,6 +59,44 @@
   - compatible
   - reg
 
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2563
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 4
+          minItems: 1
+          items:
+            minimum: 0x4c
+            maximum: 0x4f
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2781
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 8
+          minItems: 1
+          items:
+            minimum: 0x38
+            maximum: 0x3f
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/sound/ti,tlv320aic32x4.yaml b/Bindings/sound/ti,tlv320aic32x4.yaml
index a7cc9aa..4783e6d 100644
--- a/Bindings/sound/ti,tlv320aic32x4.yaml
+++ b/Bindings/sound/ti,tlv320aic32x4.yaml

@@ -90,7 +90,7 @@
         ldoin-supply = <&reg_3v3>;
         clocks = <&clks 201>;
         clock-names = "mclk";
-        aic32x4-gpio-func= <
+        aic32x4-gpio-func = <
           0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
           0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
           0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */

diff --git a/Bindings/spi/adi,axi-spi-engine.txt b/Bindings/spi/adi,axi-spi-engine.txt
deleted file mode 100644
index 8a18d71..0000000
--- a/Bindings/spi/adi,axi-spi-engine.txt
+++ /dev/null

@@ -1,31 +0,0 @@
-Analog Devices AXI SPI Engine controller Device Tree Bindings
-
-Required properties:
-- compatible		: Must be "adi,axi-spi-engine-1.00.a""
-- reg			: Physical base address and size of the register map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names - "s_axi_aclk", "spi_clk"
-- clocks		: Clock phandles and specifiers (See clock bindings for
-			  details on clock-names and clocks).
-- #address-cells	: Must be <1>
-- #size-cells		: Must be <0>
-
-Optional subnodes:
-	Subnodes are use to represent the SPI slave devices connected to the SPI
-	master. They follow the generic SPI bindings as outlined in spi-bus.txt.
-
-Example:
-
-    spi@@44a00000 {
-		compatible = "adi,axi-spi-engine-1.00.a";
-		reg = <0x44a00000 0x1000>;
-		interrupts = <0 56 4>;
-		clocks = <&clkc 15 &clkc 15>;
-		clock-names = "s_axi_aclk", "spi_clk";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* SPI devices */
-    };

diff --git a/Bindings/spi/adi,axi-spi-engine.yaml b/Bindings/spi/adi,axi-spi-engine.yaml
new file mode 100644
index 0000000..d48faa4
--- /dev/null
+++ b/Bindings/spi/adi,axi-spi-engine.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/adi,axi-spi-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI SPI Engine Controller
+
+description: |
+  The AXI SPI Engine controller is part of the SPI Engine framework[1] and
+  allows memory mapped access to the SPI Engine control bus. This allows it
+  to be used as a general purpose software driven SPI controller as well as
+  some optional advanced acceleration and offloading capabilities.
+
+  [1] https://wiki.analog.com/resources/fpga/peripherals/spi_engine
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: adi,axi-spi-engine-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI interconnect clock.
+      - description: The SPI controller clock.
+
+  clock-names:
+    items:
+      - const: s_axi_aclk
+      - const: spi_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@44a00000 {
+        compatible = "adi,axi-spi-engine-1.00.a";
+        reg = <0x44a00000 0x1000>;
+        interrupts = <0 56 4>;
+        clocks = <&clkc 15>, <&clkc 15>;
+        clock-names = "s_axi_aclk", "spi_clk";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* SPI devices */
+    };

diff --git a/Bindings/spi/renesas,rspi.yaml b/Bindings/spi/renesas,rspi.yaml
index 4d8ec69..0ef3f84 100644
--- a/Bindings/spi/renesas,rspi.yaml
+++ b/Bindings/spi/renesas,rspi.yaml

@@ -21,7 +21,7 @@
           - enum:
               - renesas,rspi-r7s72100  # RZ/A1H
               - renesas,rspi-r7s9210   # RZ/A2
-              - renesas,r9a07g043-rspi # RZ/G2UL
+              - renesas,r9a07g043-rspi # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-rspi # RZ/G2{L,LC}
               - renesas,r9a07g054-rspi # RZ/V2L
           - const: renesas,rspi-rz

diff --git a/Bindings/spi/snps,dw-apb-ssi.yaml b/Bindings/spi/snps,dw-apb-ssi.yaml
index 6348a38..fde3776 100644
--- a/Bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Bindings/spi/snps,dw-apb-ssi.yaml

@@ -72,8 +72,6 @@
           - const: snps,dw-apb-ssi
       - description: Intel Keem Bay SPI Controller
         const: intel,keembay-ssi
-      - description: Intel Thunder Bay SPI Controller
-        const: intel,thunderbay-ssi
       - description: Intel Mount Evans Integrated Management Complex SPI Controller
         const: intel,mountevans-imc-ssi
       - description: AMD Pensando Elba SoC SPI Controller

diff --git a/Bindings/spi/st,stm32-spi.yaml b/Bindings/spi/st,stm32-spi.yaml
index ae0f082..4bd9aeb 100644
--- a/Bindings/spi/st,stm32-spi.yaml
+++ b/Bindings/spi/st,stm32-spi.yaml

@@ -23,7 +23,9 @@
   compatible:
     enum:
       - st,stm32f4-spi
+      - st,stm32f7-spi
       - st,stm32h7-spi
+      - st,stm32mp25-spi
 
   reg:
     maxItems: 1

diff --git a/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index fbd4212..9b2272a 100644
--- a/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml

@@ -16,6 +16,7 @@
       - allwinner,sun8i-a83t-ths
       - allwinner,sun8i-h3-ths
       - allwinner,sun8i-r40-ths
+      - allwinner,sun20i-d1-ths
       - allwinner,sun50i-a64-ths
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
@@ -61,6 +62,7 @@
         compatible:
           contains:
             enum:
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
 
@@ -84,7 +86,9 @@
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-h3-ths
+            enum:
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun20i-d1-ths
 
     then:
       properties:
@@ -103,6 +107,7 @@
             enum:
               - allwinner,sun8i-h3-ths
               - allwinner,sun8i-r40-ths
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a64-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h5-ths

diff --git a/Bindings/thermal/loongson,ls2k-thermal.yaml b/Bindings/thermal/loongson,ls2k-thermal.yaml
index 7538469..b634f57 100644
--- a/Bindings/thermal/loongson,ls2k-thermal.yaml
+++ b/Bindings/thermal/loongson,ls2k-thermal.yaml

@@ -10,6 +10,9 @@
   - zhanghongchen <zhanghongchen@loongson.cn>
   - Yinbo Zhu <zhuyinbo@loongson.cn>
 
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -26,12 +29,16 @@
   interrupts:
     maxItems: 1
 
+  '#thermal-sensor-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - interrupts
+  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -41,4 +48,5 @@
         reg = <0x1fe01500 0x30>;
         interrupt-parent = <&liointc0>;
         interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+        #thermal-sensor-cells = <1>;
     };

diff --git a/Bindings/thermal/mediatek,thermal.yaml b/Bindings/thermal/mediatek,thermal.yaml
new file mode 100644
index 0000000..d96a2e3
--- /dev/null
+++ b/Bindings/thermal/mediatek,thermal.yaml

@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek thermal controller for on-SoC temperatures
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  This device does not have its own ADC, instead it directly controls the AUXADC
+  via AHB bus accesses. For this reason it needs phandles to the AUXADC. Also it
+  controls a mux in the apmixedsys register space via AHB bus accesses, so a
+  phandle to the APMIXEDSYS is also needed.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-thermal
+      - mediatek,mt2712-thermal
+      - mediatek,mt7622-thermal
+      - mediatek,mt7981-thermal
+      - mediatek,mt7986-thermal
+      - mediatek,mt8173-thermal
+      - mediatek,mt8183-thermal
+      - mediatek,mt8365-thermal
+      - mediatek,mt8516-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock needed for register access
+      - description: The AUXADC clock
+
+  clock-names:
+    items:
+      - const: therm
+      - const: auxadc
+
+  mediatek,auxadc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the AUXADC which the thermal controller uses
+
+  mediatek,apmixedsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the APMIXEDSYS controller
+
+  resets:
+    description: Reset controller controlling the thermal controller
+
+  nvmem-cells:
+    items:
+      - description:
+          NVMEM cell with EEPROMA phandle to the calibration data provided by an
+          NVMEM device. If unspecified default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: calibration-data
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,auxadc
+  - mediatek,apmixedsys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/reset/mt8173-resets.h>
+
+    thermal@1100b000 {
+        compatible = "mediatek,mt8173-thermal";
+        reg = <0x1100b000 0x1000>;
+        interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+        clock-names = "therm", "auxadc";
+        resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+        mediatek,auxadc = <&auxadc>;
+        mediatek,apmixedsys = <&apmixedsys>;
+        nvmem-cells = <&thermal_calibration_data>;
+        nvmem-cell-names = "calibration-data";
+        #thermal-sensor-cells = <1>;
+    };

diff --git a/Bindings/thermal/mediatek-thermal.txt b/Bindings/thermal/mediatek-thermal.txt
deleted file mode 100644
index ac39c71..0000000
--- a/Bindings/thermal/mediatek-thermal.txt
+++ /dev/null

@@ -1,52 +0,0 @@
-* Mediatek Thermal
-
-This describes the device tree binding for the Mediatek thermal controller
-which measures the on-SoC temperatures. This device does not have its own ADC,
-instead it directly controls the AUXADC via AHB bus accesses. For this reason
-this device needs phandles to the AUXADC. Also it controls a mux in the
-apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
-is also needed.
-
-Required properties:
-- compatible:
-  - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
-  - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
-  - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
-  - "mediatek,mt7622-thermal" : For MT7622 SoC
-  - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
-  - "mediatek,mt7986-thermal" : For MT7986 SoC
-  - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
-  - "mediatek,mt8365-thermal" : For MT8365 family of SoCs
-  - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
-- reg: Address range of the thermal controller
-- interrupts: IRQ for the thermal controller
-- clocks, clock-names: Clocks needed for the thermal controller. required
-                       clocks are:
-		       "therm":	 Main clock needed for register access
-		       "auxadc": The AUXADC clock
-- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
-- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
-- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- resets: Reference to the reset controller controlling the thermal controller.
-- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
-               unspecified default values shall be used.
-- nvmem-cell-names: Should be "calibration-data"
-
-Example:
-
-	thermal: thermal@1100b000 {
-		#thermal-sensor-cells = <1>;
-		compatible = "mediatek,mt8173-thermal";
-		reg = <0 0x1100b000 0 0x1000>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "therm", "auxadc";
-		resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
-		reset-names = "therm";
-		mediatek,auxadc = <&auxadc>;
-		mediatek,apmixedsys = <&apmixedsys>;
-		nvmem-cells = <&thermal_calibration_data>;
-		nvmem-cell-names = "calibration-data";
-	};

diff --git a/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml
index 01253d5..7541e27 100644
--- a/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml
+++ b/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml

@@ -114,12 +114,14 @@
   - |
     #include <dt-bindings/iio/qcom,spmi-vadc.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pm8998_adc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc-rev2";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -130,7 +132,7 @@
             };
         };
 
-        pm8998_adc_tm: adc-tm@3400 {
+        adc-tm@3400 {
             compatible = "qcom,spmi-adc-tm-hc";
             reg = <0x3400>;
             interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;

diff --git a/Bindings/thermal/qcom-spmi-adc-tm5.yaml b/Bindings/thermal/qcom-spmi-adc-tm5.yaml
index 3c81def..d9d2657 100644
--- a/Bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Bindings/thermal/qcom-spmi-adc-tm5.yaml

@@ -167,12 +167,14 @@
   - |
     #include <dt-bindings/iio/qcom,spmi-vadc.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pm8150b_adc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -186,7 +188,7 @@
             };
         };
 
-        pm8150b_adc_tm: adc-tm@3500 {
+        adc-tm@3500 {
             compatible = "qcom,spmi-adc-tm5";
             reg = <0x3500>;
             interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -207,12 +209,14 @@
     #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
     #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pmk8350_vadc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc7";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -233,7 +237,7 @@
             };
         };
 
-        pmk8350_adc_tm: adc-tm@3400 {
+        adc-tm@3400 {
             compatible = "qcom,spmi-adc-tm5-gen2";
             reg = <0x3400>;
             interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;

diff --git a/Bindings/thermal/qcom-tsens.yaml b/Bindings/thermal/qcom-tsens.yaml
index 437b747..99d9c52 100644
--- a/Bindings/thermal/qcom-tsens.yaml
+++ b/Bindings/thermal/qcom-tsens.yaml

@@ -66,6 +66,7 @@
               - qcom,sm8350-tsens
               - qcom,sm8450-tsens
               - qcom,sm8550-tsens
+              - qcom,sm8650-tsens
           - const: qcom,tsens-v2
 
       - description: v2 of TSENS with combined interrupt

diff --git a/Bindings/thermal/thermal-zones.yaml b/Bindings/thermal/thermal-zones.yaml
index 4a8dabc..dbd5262 100644
--- a/Bindings/thermal/thermal-zones.yaml
+++ b/Bindings/thermal/thermal-zones.yaml

@@ -75,6 +75,22 @@
           framework and assumes that the thermal sensors in this zone
           support interrupts.
 
+      critical-action:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: |
+          The action the OS should perform after the critical temperature is reached.
+          By default the system will shutdown as a safe action to prevent damage
+          to the hardware, if the property is not set.
+          The shutdown action should be always the default and preferred one.
+          Choose 'reboot' with care, as the hardware may be in thermal stress,
+          thus leading to infinite reboots that may cause damage to the hardware.
+          Make sure the firmware/bootloader will act as the last resort and take
+          over the thermal control.
+
+        enum:
+          - shutdown
+          - reboot
+
       thermal-sensors:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1

diff --git a/Bindings/timer/sifive,clint.yaml b/Bindings/timer/sifive,clint.yaml
index e8be6c4..fced6f2 100644
--- a/Bindings/timer/sifive,clint.yaml
+++ b/Bindings/timer/sifive,clint.yaml

@@ -33,11 +33,13 @@
               - sifive,fu540-c000-clint # SiFive FU540
               - starfive,jh7100-clint   # StarFive JH7100
               - starfive,jh7110-clint   # StarFive JH7110
+              - starfive,jh8100-clint   # StarFive JH8100
           - const: sifive,clint0        # SiFive CLINT v0 IP block
       - items:
           - enum:
               - allwinner,sun20i-d1-clint
               - sophgo,cv1800b-clint
+              - sophgo,cv1812h-clint
               - thead,th1520-clint
           - const: thead,c900-clint
       - items:

diff --git a/Bindings/timer/thead,c900-aclint-mtimer.yaml b/Bindings/timer/thead,c900-aclint-mtimer.yaml
index fbd2356..2e92bcd 100644
--- a/Bindings/timer/thead,c900-aclint-mtimer.yaml
+++ b/Bindings/timer/thead,c900-aclint-mtimer.yaml

@@ -17,7 +17,12 @@
       - const: thead,c900-aclint-mtimer
 
   reg:
-    maxItems: 1
+    items:
+      - description: MTIMECMP Registers
+
+  reg-names:
+    items:
+      - const: mtimecmp
 
   interrupts-extended:
     minItems: 1
@@ -28,6 +33,7 @@
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts-extended
 
 examples:
@@ -39,5 +45,6 @@
                             <&cpu3intc 7>,
                             <&cpu4intc 7>;
       reg = <0xac000000 0x00010000>;
+      reg-names = "mtimecmp";
     };
 ...

diff --git a/Bindings/tpm/google,cr50.yaml b/Bindings/tpm/google,cr50.yaml
new file mode 100644
index 0000000..9302e12
--- /dev/null
+++ b/Bindings/tpm/google,cr50.yaml

@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/google,cr50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Security Chip H1 (running Cr50 firmware)
+
+maintainers:
+  - Andrey Pronin <apronin@chromium.org>
+
+description: |
+  Google has designed a family of security chips called "Titan".
+  One member is the H1 built into Chromebooks and running Cr50 firmware:
+  https://www.osfc.io/2018/talks/google-secure-microcontroller-and-ccd-closed-case-debugging/
+
+  The chip provides several functions, including TPM 2.0 like functionality.
+  It communicates over SPI or I²C using the FIFO protocol described in the
+  TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP), sec 6:
+  https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
+
+properties:
+  compatible:
+    const: google,cr50
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+anyOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: tcg,tpm-tis-i2c.yaml#/properties/reg
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@0 {
+            reg = <0>;
+            compatible = "google,cr50";
+            spi-max-frequency = <800000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@50 {
+            compatible = "google,cr50";
+            reg = <0x50>;
+            interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cr50_int>;
+        };
+    };

diff --git a/Bindings/tpm/ibm,vtpm.yaml b/Bindings/tpm/ibm,vtpm.yaml
new file mode 100644
index 0000000..50a3fd3
--- /dev/null
+++ b/Bindings/tpm/ibm,vtpm.yaml

@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/ibm,vtpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Virtual Trusted Platform Module (vTPM)
+
+maintainers:
+  - Nayna Jain <nayna@linux.ibm.com>
+
+description: |
+  Virtual TPM is used on IBM POWER7+ and POWER8 systems running POWERVM.
+  It is supported through the adjunct partition with firmware release 740
+  or higher.  With vTPM support, each lpar is able to have its own vTPM
+  without the physical TPM hardware.  The TPM functionality is provided by
+  communicating with the vTPM adjunct partition through Hypervisor calls
+  (Hcalls) and Command/Response Queue (CRQ) commands.
+
+properties:
+  compatible:
+    enum:
+      - IBM,vtpm
+      - IBM,vtpm20
+
+  device_type:
+    description:
+      type of virtual device
+    enum:
+      - IBM,vtpm
+      - IBM,vtpm20
+
+  reg:
+    maxItems: 1
+
+  'ibm,#dma-address-cells':
+    description:
+      number of cells that are used to encode the physical address field of
+      dma-window properties
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  'ibm,#dma-size-cells':
+    description:
+      number of cells that are used to encode the size field of
+      dma-window properties
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ibm,my-dma-window:
+    description:
+      DMA window associated with this virtual I/O Adapter
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+
+  ibm,my-drc-index:
+    description:
+      integer index for the connector between the device and its parent;
+      present only if Dynamic Reconfiguration (DR) Connector is enabled
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ibm,loc-code:
+    description:
+      unique and persistent location code associated with this virtual
+      I/O Adapter
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - device_type
+  - reg
+  - interrupts
+  - ibm,#dma-address-cells
+  - ibm,#dma-size-cells
+  - ibm,my-dma-window
+  - ibm,my-drc-index
+  - ibm,loc-code
+  - linux,sml-base
+  - linux,sml-size
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@30000003 {
+            compatible = "IBM,vtpm";
+            device_type = "IBM,vtpm";
+            reg = <0x30000003>;
+            interrupts = <0xa0003 0x0>;
+            ibm,#dma-address-cells = <0x2>;
+            ibm,#dma-size-cells = <0x2>;
+            ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
+            ibm,my-drc-index = <0x30000003>;
+            ibm,loc-code = "U8286.41A.10082DV-V3-C3";
+            linux,sml-base = <0xc60e 0x0>;
+            linux,sml-size = <0xbce10200>;
+        };
+    };

diff --git a/Bindings/tpm/microsoft,ftpm.yaml b/Bindings/tpm/microsoft,ftpm.yaml
new file mode 100644
index 0000000..fdb8196
--- /dev/null
+++ b/Bindings/tpm/microsoft,ftpm.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/microsoft,ftpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsoft firmware-based Trusted Platform Module (fTPM)
+
+maintainers:
+  - Thirupathaiah Annapureddy <thiruan@microsoft.com>
+  - Sasha Levin <sashal@kernel.org>
+
+description: |
+  Commodity CPU architectures, such as ARM and Intel CPUs, have started to
+  offer trusted computing features in their CPUs aimed at displacing dedicated
+  trusted hardware.  Unfortunately, these CPU architectures raise serious
+  challenges to building trusted systems because they omit providing secure
+  resources outside the CPU perimeter.
+
+  Microsoft's firmware-based TPM 2.0 (fTPM) leverages ARM TrustZone to overcome
+  these challenges and provide software with security guarantees similar to
+  those of dedicated trusted hardware.
+
+  https://www.microsoft.com/en-us/research/publication/ftpm-software-implementation-tpm-chip/
+  https://github.com/Microsoft/ms-tpm-20-ref/tree/main/Samples/ARM32-FirmwareTPM
+
+properties:
+  compatible:
+    const: microsoft,ftpm
+
+required:
+  - compatible
+  - linux,sml-base
+  - linux,sml-size
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpm {
+        compatible = "microsoft,ftpm";
+        linux,sml-base = <0x0 0xc0000000>;
+        linux,sml-size = <0x10000>;
+    };

diff --git a/Bindings/tpm/tcg,tpm-tis-i2c.yaml b/Bindings/tpm/tcg,tpm-tis-i2c.yaml
new file mode 100644
index 0000000..3ab4434
--- /dev/null
+++ b/Bindings/tpm/tcg,tpm-tis-i2c.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I²C-attached Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+description: |
+  The Trusted Computing Group (TCG) has defined a multi-vendor standard
+  for accessing a TPM chip.  It can be transported over various buses,
+  one of them being I²C.  The standard is named:
+  TCG PC Client Specific TPM Interface Specification (TIS)
+  https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+  The I²C interface was not originally part of the standard, but added
+  in 2017 with a separate document:
+  TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP)
+  https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
+
+  Recent TPM 2.0 chips conform to this generic interface, others use a
+  vendor-specific I²C interface.
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic TPM 2.0 chips conforming to TCG PTP interface
+        items:
+          - enum:
+              - infineon,slb9673
+              - nuvoton,npct75x
+          - const: tcg,tpm-tis-i2c
+
+      - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface
+        items:
+          - enum:
+              - atmel,at97sc3204t # TPM 1.2
+              - infineon,slb9635tt # TPM 1.2 (maximum 100 kHz)
+              - infineon,slb9645tt # TPM 1.2 (maximum 400 kHz)
+              - infineon,tpm_i2c_infineon # TPM 1.2
+              - nuvoton,npct501 # TPM 1.2
+              - nuvoton,npct601 # TPM 2.0
+              - st,st33zp24-i2c # TPM 2.0
+              - winbond,wpct301 # TPM 1.2
+
+  reg:
+    description: address of TPM on the I²C bus
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@57 {
+            label = "tpm";
+            compatible = "nuvoton,npct601";
+            reg = <0x57>;
+            linux,sml-base = <0x7f 0xfd450000>;
+            linux,sml-size = <0x10000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@13 {
+            reg = <0x13>;
+            compatible = "st,st33zp24-i2c";
+            interrupt-parent = <&gpio5>;
+            interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+            lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+    };

diff --git a/Bindings/tpm/tcg,tpm-tis-mmio.yaml b/Bindings/tpm/tcg,tpm-tis-mmio.yaml
new file mode 100644
index 0000000..87bce06
--- /dev/null
+++ b/Bindings/tpm/tcg,tpm-tis-mmio.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMIO-accessed Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+description: |
+  The Trusted Computing Group (TCG) has defined a multi-vendor standard
+  for accessing a TPM chip.  It can be transported over various buses,
+  one of them being LPC (via MMIO).  The standard is named:
+  TCG PC Client Specific TPM Interface Specification (TIS)
+  https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - at97sc3201
+          - atmel,at97sc3204
+          - socionext,synquacer-tpm-mmio
+      - const: tcg,tpm-tis-mmio
+
+  reg:
+    description:
+      location and length of the MMIO registers, length should be
+      at least 0x5000 bytes
+
+allOf:
+  - $ref: tpm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpm@90000 {
+        compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
+        reg = <0x90000 0x5000>;
+        interrupt-parent = <&EIC0>;
+        interrupts = <1 2>;
+    };

diff --git a/Bindings/tpm/tcg,tpm_tis-spi.yaml b/Bindings/tpm/tcg,tpm_tis-spi.yaml
new file mode 100644
index 0000000..c3413b4
--- /dev/null
+++ b/Bindings/tpm/tcg,tpm_tis-spi.yaml

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-attached Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+description: |
+  The Trusted Computing Group (TCG) has defined a multi-vendor standard
+  for accessing a TPM chip.  It can be transported over various buses,
+  one of them being SPI.  The standard is named:
+  TCG PC Client Specific TPM Interface Specification (TIS)
+  https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - infineon,slb9670
+          - st,st33htpm-spi
+          - st,st33zp24-spi
+      - const: tcg,tpm_tis-spi
+
+allOf:
+  - $ref: tpm-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,st33zp24-spi
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 10000000
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@0 {
+            reg = <0>;
+            compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+            spi-max-frequency = <10000000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tpm@0 {
+            reg = <0>;
+            compatible = "st,st33zp24-spi", "tcg,tpm_tis-spi";
+            spi-max-frequency = <10000000>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+            lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+    };

diff --git a/Bindings/tpm/tpm-common.yaml b/Bindings/tpm/tpm-common.yaml
new file mode 100644
index 0000000..3c1241b
--- /dev/null
+++ b/Bindings/tpm/tpm-common.yaml

@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tpm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trusted Platform Module common properties
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+properties:
+  $nodename:
+    pattern: '^tpm(@[0-9a-f]+)?$'
+
+  interrupts:
+    description: indicates command completion
+    maxItems: 1
+
+  label:
+    description: human readable string describing the device, e.g. "tpm"
+
+  linux,sml-base:
+    description:
+      base address of reserved memory allocated for firmware event log
+    $ref: /schemas/types.yaml#/definitions/uint64
+
+  linux,sml-size:
+    description:
+      size of reserved memory allocated for firmware event log
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  memory-region:
+    description: reserved memory allocated for firmware event log
+    maxItems: 1
+
+  powered-while-suspended:
+    description:
+      present when the TPM is left powered on between suspend and resume
+      (makes the suspend/resume callbacks do nothing)
+    type: boolean
+
+  resets:
+    description: Reset controller to reset the TPM
+    maxItems: 1
+
+  reset-gpios:
+    description: Output GPIO pin to reset the TPM
+    maxItems: 1
+
+# must always have both linux,sml-base and linux,sml-size
+dependentRequired:
+  linux,sml-base: ['linux,sml-size']
+  linux,sml-size: ['linux,sml-base']
+
+# must only have either memory-region or linux,sml-base
+# as well as either resets or reset-gpios
+dependentSchemas:
+  memory-region:
+    properties:
+      linux,sml-base: false
+  linux,sml-base:
+    properties:
+      memory-region: false
+  resets:
+    properties:
+      reset-gpios: false
+  reset-gpios:
+    properties:
+      resets: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^st,st33zp24'
+    then:
+      properties:
+        lpcpd-gpios:
+          description:
+            Output GPIO pin used for ST33ZP24 power management of D1/D2 state.
+            If set, power must be present when the platform is going into
+            sleep/hibernate mode.
+          maxItems: 1
+
+additionalProperties: true

diff --git a/Bindings/trivial-devices.yaml b/Bindings/trivial-devices.yaml
index c3190f2..79dcd92 100644
--- a/Bindings/trivial-devices.yaml
+++ b/Bindings/trivial-devices.yaml

@@ -49,8 +49,6 @@
           - ams,iaq-core
             # i2c serial eeprom (24cxx)
           - at,24c08
-            # i2c trusted platform module (TPM)
-          - atmel,at97sc3204t
             # ATSHA204 - i2c h/w symmetric crypto module
           - atmel,atsha204
             # ATSHA204A - i2c h/w symmetric crypto module
@@ -117,6 +115,10 @@
           - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
+            # Monolithic Power Systems Inc. multi-phase controller mp2856
+          - mps,mp2856
+            # Monolithic Power Systems Inc. multi-phase controller mp2857
+          - mps,mp2857
             # Monolithic Power Systems Inc. multi-phase controller mp2888
           - mps,mp2888
             # Monolithic Power Systems Inc. multi-phase controller mp2971
@@ -125,6 +127,8 @@
           - mps,mp2973
             # Monolithic Power Systems Inc. multi-phase controller mp2975
           - mps,mp2975
+            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
+          - mps,mp5990
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)
@@ -145,12 +149,6 @@
           - infineon,ir38263
             # Infineon IRPS5401 Voltage Regulator (PMIC)
           - infineon,irps5401
-            # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
-          - infineon,slb9635tt
-            # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
-          - infineon,slb9645tt
-            # Infineon SLB9673 I2C TPM 2.0
-          - infineon,slb9673
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
             # Infineon Multi-phase Digital VR Controller xdpe11280
@@ -179,6 +177,8 @@
           - isil,isl29030
             # Intersil ISL68137 Digital Output Configurable PWM Controller
           - isil,isl68137
+            # Intersil ISL76682 Ambient Light Sensor
+          - isil,isl76682
             # Linear Technology LTC2488
           - lineartechnology,ltc2488
             # 5 Bit Programmable, Pulse-Width Modulator
@@ -301,10 +301,6 @@
           - national,lm85
             # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
           - national,lm92
-            # i2c trusted platform module (TPM)
-          - nuvoton,npct501
-            # i2c trusted platform module (TPM2)
-          - nuvoton,npct601
             # Nuvoton Temperature Sensor
           - nuvoton,w83773g
             # OKI ML86V7667 video decoder
@@ -349,8 +345,6 @@
           - silabs,si7020
             # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
           - skyworks,sky81452
-            # Socionext SynQuacer TPM MMIO module
-          - socionext,synquacer-tpm-mmio
             # SparkFun Qwiic Joystick (COM-15168) with i2c interface
           - sparkfun,qwiic-joystick
             # i2c serial eeprom (24cxx)
@@ -405,8 +399,6 @@
           - winbond,w83793
             # Vicor Corporation Digital Supervisor
           - vicor,pli1209bc
-            # i2c trusted platform module (TPM)
-          - winbond,wpct301
 
 required:
   - compatible

diff --git a/Bindings/ufs/qcom,ufs.yaml b/Bindings/ufs/qcom,ufs.yaml
index 2cf3d01..10c1464 100644
--- a/Bindings/ufs/qcom,ufs.yaml
+++ b/Bindings/ufs/qcom,ufs.yaml

@@ -27,6 +27,7 @@
           - qcom,msm8996-ufshc
           - qcom,msm8998-ufshc
           - qcom,sa8775p-ufshc
+          - qcom,sc7280-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
           - qcom,sm6115-ufshc
@@ -118,6 +119,7 @@
             enum:
               - qcom,msm8998-ufshc
               - qcom,sa8775p-ufshc
+              - qcom,sc7280-ufshc
               - qcom,sc8280xp-ufshc
               - qcom,sm8250-ufshc
               - qcom,sm8350-ufshc

diff --git a/Bindings/ufs/samsung,exynos-ufs.yaml b/Bindings/ufs/samsung,exynos-ufs.yaml
index 88cc1e3..b2b509b 100644
--- a/Bindings/ufs/samsung,exynos-ufs.yaml
+++ b/Bindings/ufs/samsung,exynos-ufs.yaml

@@ -55,9 +55,12 @@
 
   samsung,sysreg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: Should be phandle/offset pair. The phandle to the syscon node
-                 which indicates the FSYSx sysreg interface and the offset of
-                 the control register for UFS io coherency setting.
+    items:
+      - items:
+          - description: phandle to FSYSx sysreg node
+          - description: offset of the control register for UFS io coherency setting
+    description:
+      Phandle and offset to the FSYSx sysreg for UFS io coherency setting.
 
   dma-coherent: true
 

diff --git a/Bindings/ufs/ufs-common.yaml b/Bindings/ufs/ufs-common.yaml
index 985ea8f..31fe7f3 100644
--- a/Bindings/ufs/ufs-common.yaml
+++ b/Bindings/ufs/ufs-common.yaml

@@ -87,6 +87,8 @@
     description:
       Specifies max. load that can be drawn from VCCQ2 supply.
 
+  msi-parent: true
+
 dependencies:
   freq-table-hz: [ clocks ]
   operating-points-v2: [ clocks, clock-names ]

diff --git a/Bindings/usb/dwc3-xilinx.yaml b/Bindings/usb/dwc3-xilinx.yaml
index bb373eb..00f87a5 100644
--- a/Bindings/usb/dwc3-xilinx.yaml
+++ b/Bindings/usb/dwc3-xilinx.yaml

@@ -7,7 +7,8 @@
 title: Xilinx SuperSpeed DWC3 USB SoC controller
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:

diff --git a/Bindings/usb/generic-xhci.yaml b/Bindings/usb/generic-xhci.yaml
index 594ebb3..6ceafa4a 100644
--- a/Bindings/usb/generic-xhci.yaml
+++ b/Bindings/usb/generic-xhci.yaml

@@ -9,9 +9,6 @@
 maintainers:
   - Mathias Nyman <mathias.nyman@intel.com>
 
-allOf:
-  - $ref: usb-xhci.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -25,6 +22,11 @@
               - marvell,armada-380-xhci
               - marvell,armada-8k-xhci
           - const: generic-xhci
+      - description: Broadcom SoCs with power domains
+        items:
+          - enum:
+              - brcm,bcm2711-xhci
+          - const: brcm,xhci-brcm-v2
       - description: Broadcom STB SoCs with xHCI
         enum:
           - brcm,xhci-brcm-v2
@@ -49,6 +51,9 @@
       - const: core
       - const: reg
 
+  power-domains:
+    maxItems: 1
+
 unevaluatedProperties: false
 
 required:
@@ -56,6 +61,20 @@
   - reg
   - interrupts
 
+allOf:
+  - $ref: usb-xhci.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2711-xhci
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 examples:
   - |
     usb@f0931000 {

diff --git a/Bindings/usb/genesys,gl850g.yaml b/Bindings/usb/genesys,gl850g.yaml
index ee08b9c..37cf524 100644
--- a/Bindings/usb/genesys,gl850g.yaml
+++ b/Bindings/usb/genesys,gl850g.yaml

@@ -29,6 +29,11 @@
     description:
       the regulator that provides 3.3V core power to the hub.
 
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
 required:
   - compatible
   - reg

diff --git a/Bindings/usb/mediatek,mtk-xhci.yaml b/Bindings/usb/mediatek,mtk-xhci.yaml
index e9644e3..924fd3d 100644
--- a/Bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Bindings/usb/mediatek,mtk-xhci.yaml

@@ -124,6 +124,17 @@
       defined in the xHCI spec on MTK's controller.
     default: 5000
 
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      It is a quirk used to work around Gen1 isoc-in endpoint transfer issue
+      that still send out unexpected ACK after device finishes the burst
+      transfer with a short packet and cause an exception, specially on a 4K
+      camera device, it happens on controller before about IPM v1.6.0;
+      the side-effect is that it may cause performance drop about 10%,
+      including bulk transfer, prefer to use 3k here. The size is in bytes.
+    enum: [1024, 2048, 3072, 4096]
+
   # the following properties are only used for case 1
   wakeup-source:
     description: enable USB remote wakeup, see power/wakeup-source.txt

diff --git a/Bindings/usb/microchip,usb5744.yaml b/Bindings/usb/microchip,usb5744.yaml
index 6d4cfd9..445183d 100644
--- a/Bindings/usb/microchip,usb5744.yaml
+++ b/Bindings/usb/microchip,usb5744.yaml

@@ -16,8 +16,9 @@
   USB 2.0 traffic.
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
   - Michal Simek <michal.simek@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:

diff --git a/Bindings/usb/nxp,ptn5110.yaml b/Bindings/usb/nxp,ptn5110.yaml
index 28eb25e..eaedb4c 100644
--- a/Bindings/usb/nxp,ptn5110.yaml
+++ b/Bindings/usb/nxp,ptn5110.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP PTN5110 Typec Port Cotroller
+title: NXP PTN5110 Type-C Port Controller
 
 maintainers:
   - Li Jun <jun.li@nxp.com>

diff --git a/Bindings/usb/qcom,dwc3.yaml b/Bindings/usb/qcom,dwc3.yaml
index 915c820..63d150b 100644
--- a/Bindings/usb/qcom,dwc3.yaml
+++ b/Bindings/usb/qcom,dwc3.yaml

@@ -46,6 +46,8 @@
           - qcom,sm8350-dwc3
           - qcom,sm8450-dwc3
           - qcom,sm8550-dwc3
+          - qcom,sm8650-dwc3
+          - qcom,x1e80100-dwc3
       - const: qcom,dwc3
 
   reg:
@@ -97,12 +99,29 @@
       - const: apps-usb
 
   interrupts:
-    minItems: 1
-    maxItems: 4
+    description: |
+      Different types of interrupts are used based on HS PHY used on target:
+        - pwr_event: Used for wakeup based on other power events.
+        - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+                       hs_phy_irq which is not triggered by default and its
+                       functionality is mutually exclusive to that of
+                       {dp/dm}_hs_phy_irq and qusb2_phy_irq.
+        - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and
+                      expose only a single IRQ whose behavior can be modified
+                      by the QUSB2PHY_INTR_CTRL register. The required DPSE/
+                      DMSE configuration is done in QUSB2PHY_INTR_CTRL register
+                      of PHY address space.
+        - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/
+                               DM pads of the SoC. These are used for wakeup
+                               only on SoCs with non-QUSB2 targets with
+                               exception of SDM670/SDM845/SM6350.
+        - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
+    minItems: 2
+    maxItems: 5
 
   interrupt-names:
-    minItems: 1
-    maxItems: 4
+    minItems: 2
+    maxItems: 5
 
   qcom,select-utmi-as-pipe-clk:
     description:
@@ -263,6 +282,7 @@
           contains:
             enum:
               - qcom,sc8280xp-dwc3
+              - qcom,x1e80100-dwc3
     then:
       properties:
         clocks:
@@ -288,8 +308,8 @@
     then:
       properties:
         clocks:
-          minItems: 5
-          maxItems: 6
+          minItems: 4
+          maxItems: 5
         clock-names:
           oneOf:
             - items:
@@ -298,13 +318,11 @@
                 - const: iface
                 - const: sleep
                 - const: mock_utmi
-                - const: bus
             - items:
                 - const: cfg_noc
                 - const: core
                 - const: sleep
                 - const: mock_utmi
-                - const: bus
 
   - if:
       properties:
@@ -318,6 +336,7 @@
               - qcom,sm8250-dwc3
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
     then:
       properties:
         clocks:
@@ -357,131 +376,96 @@
         compatible:
           contains:
             enum:
-              - qcom,ipq4019-dwc3
+              - qcom,ipq5018-dwc3
               - qcom,ipq6018-dwc3
-              - qcom,ipq8064-dwc3
               - qcom,ipq8074-dwc3
-              - qcom,msm8994-dwc3
+              - qcom,msm8953-dwc3
+              - qcom,msm8998-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: qusb2_phy
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-dwc3
               - qcom,qcs404-dwc3
+              - qcom,sdm660-dwc3
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: qusb2_phy
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5332-dwc3
+              - qcom,x1e80100-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq8064-dwc3
+              - qcom,msm8994-dwc3
+              - qcom,sa8775p-dwc3
               - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sc8280xp-dwc3
               - qcom,sdm670-dwc3
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
               - qcom,sdx75-dwc3
               - qcom,sm4250-dwc3
-              - qcom,sm6125-dwc3
               - qcom,sm6350-dwc3
               - qcom,sm8150-dwc3
               - qcom,sm8250-dwc3
               - qcom,sm8350-dwc3
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
     then:
       properties:
         interrupts:
-          items:
-            - description: The interrupt that is asserted
-                when a wakeup event is received on USB2 bus.
-            - description: The interrupt that is asserted
-                when a wakeup event is received on USB3 bus.
-            - description: Wakeup event on DM line.
-            - description: Wakeup event on DP line.
-        interrupt-names:
-          items:
-            - const: hs_phy_irq
-            - const: ss_phy_irq
-            - const: dm_hs_phy_irq
-            - const: dp_hs_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8953-dwc3
-              - qcom,msm8996-dwc3
-              - qcom,msm8998-dwc3
-              - qcom,sm6115-dwc3
-    then:
-      properties:
-        interrupts:
-          maxItems: 2
-        interrupt-names:
-          items:
-            - const: hs_phy_irq
-            - const: ss_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq5018-dwc3
-              - qcom,ipq5332-dwc3
-              - qcom,sdm660-dwc3
-    then:
-      properties:
-        interrupts:
-          minItems: 1
-          maxItems: 2
-        interrupt-names:
-          minItems: 1
-          items:
-            - const: hs_phy_irq
-            - const: ss_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc7280-dwc3
-    then:
-      properties:
-        interrupts:
-          minItems: 3
-          maxItems: 4
-        interrupt-names:
-          minItems: 3
-          items:
-            - const: hs_phy_irq
-            - const: dp_hs_phy_irq
-            - const: dm_hs_phy_irq
-            - const: ss_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8280xp-dwc3
-    then:
-      properties:
-        interrupts:
-          maxItems: 4
+          minItems: 4
+          maxItems: 5
         interrupt-names:
           items:
             - const: pwr_event
-            - const: dp_hs_phy_irq
-            - const: dm_hs_phy_irq
-            - const: ss_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sa8775p-dwc3
-    then:
-      properties:
-        interrupts:
-          minItems: 3
-          maxItems: 4
-        interrupt-names:
-          minItems: 3
-          items:
-            - const: pwr_event
+            - const: hs_phy_irq
             - const: dp_hs_phy_irq
             - const: dm_hs_phy_irq
             - const: ss_phy_irq
@@ -519,12 +503,13 @@
                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
             assigned-clock-rates = <19200000>, <150000000>;
 
-            interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+            interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>,
                          <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
-                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
-            interrupt-names = "hs_phy_irq", "ss_phy_irq",
-                          "dm_hs_phy_irq", "dp_hs_phy_irq";
+                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "pwr_event", "hs_phy_irq",
+                          "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq";
 
             power-domains = <&gcc USB30_PRIM_GDSC>;
 

diff --git a/Bindings/usb/qcom,wcd939x-usbss.yaml b/Bindings/usb/qcom,wcd939x-usbss.yaml
new file mode 100644
index 0000000..7ddfd33
--- /dev/null
+++ b/Bindings/usb/qcom,wcd939x-usbss.yaml

@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 USB SubSystem Altmode/Analog Audio Switch
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
+  functionally separate USB SubSystem for Altmode/Analog Audio Switch
+  accessible over an I2C interface.
+  The Audio Headphone and Microphone data path between the Codec and the
+  USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint
+  graph description to handle USB-C altmode & orientation switching for Audio
+  Accessory Mode.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9390-usbss
+      - items:
+          - const: qcom,wcd9395-usbss
+          - const: qcom,wcd9390-usbss
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description: USBSS VDD power supply
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          A port node to link the WCD939x USB SubSystem to a TypeC controller for the
+          purpose of handling altmode muxing and orientation switching.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          A port node to link the WCD939x USB SubSystem to the Codec SubSystem for the
+          purpose of handling USB-C Audio Accessory Mode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@42 {
+            compatible = "qcom,wcd9390-usbss";
+            reg = <0x42>;
+
+            vdd-supply = <&vreg_bob>;
+
+            mode-switch;
+            orientation-switch;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    wcd9390_usbss_sbu: endpoint {
+                        remote-endpoint = <&typec_sbu>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    wcd9390_usbss_codec: endpoint {
+                        remote-endpoint = <&wcd9390_codec_usbss>;
+                    };
+                };
+            };
+        };
+    };
+...

diff --git a/Bindings/usb/renesas,usbhs.yaml b/Bindings/usb/renesas,usbhs.yaml
index bad55df..40ada78 100644
--- a/Bindings/usb/renesas,usbhs.yaml
+++ b/Bindings/usb/renesas,usbhs.yaml

@@ -19,7 +19,7 @@
       - items:
           - enum:
               - renesas,usbhs-r7s9210   # RZ/A2
-              - renesas,usbhs-r9a07g043 # RZ/G2UL
+              - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five
               - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
               - renesas,usbhs-r9a07g054 # RZ/V2L
           - const: renesas,rza2-usbhs

diff --git a/Bindings/usb/snps,dwc3.yaml b/Bindings/usb/snps,dwc3.yaml
index ee5af4b..203a1eb 100644
--- a/Bindings/usb/snps,dwc3.yaml
+++ b/Bindings/usb/snps,dwc3.yaml

@@ -432,6 +432,10 @@
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  num-hc-interrupters:
+    maximum: 8
+    default: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:

diff --git a/Bindings/usb/ti,tps6598x.yaml b/Bindings/usb/ti,tps6598x.yaml
index 323d664..1745e28 100644
--- a/Bindings/usb/ti,tps6598x.yaml
+++ b/Bindings/usb/ti,tps6598x.yaml

@@ -38,6 +38,10 @@
       - const: main
       - const: patch-address
 
+  reset-gpios:
+    description: GPIO used for the HRESET pin.
+    maxItems: 1
+
   wakeup-source: true
 
   interrupts:
@@ -90,6 +94,7 @@
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
@@ -106,6 +111,7 @@
 
             pinctrl-names = "default";
             pinctrl-0 = <&typec_pins>;
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 
             typec_con: connector {
                 compatible = "usb-c-connector";

diff --git a/Bindings/usb/usb-xhci.yaml b/Bindings/usb/usb-xhci.yaml
index 180a261..4238ae8 100644
--- a/Bindings/usb/usb-xhci.yaml
+++ b/Bindings/usb/usb-xhci.yaml

@@ -29,6 +29,12 @@
     description: Interrupt moderation interval
     default: 5000
 
+  num-hc-interrupters:
+    description: Maximum number of interrupters to allocate
+    $ref: /schemas/types.yaml#/definitions/uint16
+    minimum: 1
+    maximum: 1024
+
 additionalProperties: true
 
 examples:

diff --git a/Bindings/usb/xlnx,usb2.yaml b/Bindings/usb/xlnx,usb2.yaml
index 868dffe..a7f75fe 100644
--- a/Bindings/usb/xlnx,usb2.yaml
+++ b/Bindings/usb/xlnx,usb2.yaml

@@ -7,7 +7,8 @@
 title: Xilinx udc controller
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@amd.com>
+  - Mubin Sayyed <mubin.sayyed@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:

diff --git a/Bindings/vendor-prefixes.yaml b/Bindings/vendor-prefixes.yaml
index 309b94c..1a0dc04 100644
--- a/Bindings/vendor-prefixes.yaml
+++ b/Bindings/vendor-prefixes.yaml

@@ -79,6 +79,8 @@
     description: ALFA Network Inc.
   "^allegro,.*":
     description: Allegro DVT
+  "^alliedvision,.*":
+    description: Allied Vision Technologies GmbH
   "^allo,.*":
     description: Allo.com
   "^allwinner,.*":
@@ -119,6 +121,8 @@
     description: Andes Technology Corporation
   "^anvo,.*":
     description: Anvo-Systems Dresden GmbH
+  "^aosong,.*":
+    description: Guangzhou Aosong Electronic Co., Ltd.
   "^apm,.*":
     description: Applied Micro Circuits Corporation (APM)
   "^apple,.*":
@@ -294,6 +298,8 @@
     description: CompuLab Ltd.
   "^congatec,.*":
     description: congatec GmbH
+  "^coolpi,.*":
+    description: cool-pi.com
   "^coreriver,.*":
     description: CORERIVER Semiconductor Co.,Ltd.
   "^corpro,.*":
@@ -352,6 +358,8 @@
     description: Digi International Inc.
   "^digilent,.*":
     description: Diglent, Inc.
+  "^dimonoff,.*":
+    description: Dimonoff inc.
   "^diodes,.*":
     description: Diodes, Inc.
   "^dioo,.*":
@@ -474,6 +482,8 @@
     description: Fairphone B.V.
   "^faraday,.*":
     description: Faraday Technology Corporation
+  "^fascontek,.*":
+    description: Fascontek
   "^fastrax,.*":
     description: Fastrax Oy
   "^fcs,.*":
@@ -502,6 +512,8 @@
     description: Fujitsu Ltd.
   "^fxtec,.*":
     description: FX Technology Ltd.
+  "^galaxycore,.*":
+    description: GalaxyCore Inc.
   "^gardena,.*":
     description: GARDENA GmbH
   "^gateway,.*":
@@ -597,6 +609,8 @@
     description: Hewlett Packard Enterprise
   "^hsg,.*":
     description: HannStar Display Co.
+  "^htc,.*":
+    description: HTC Corporation
   "^huawei,.*":
     description: Huawei Technologies Co., Ltd.
   "^hugsun,.*":
@@ -1179,6 +1193,8 @@
     description: Shenzhen Roofull Technology Co, Ltd
   "^roseapplepi,.*":
     description: RoseapplePi.org
+  "^rve,.*":
+    description: Recharge Véhicule Électrique (RVE) inc.
   "^saef,.*":
     description: Saef Technology Limited
   "^samsung,.*":
@@ -1281,6 +1297,8 @@
     description: Skyworks Solutions, Inc.
   "^smartlabs,.*":
     description: SmartLabs LLC
+  "^smi,.*":
+    description: Silicon Motion Technology Corporation
   "^smsc,.*":
     description: Standard Microsystems Corporation
   "^snps,.*":
@@ -1381,6 +1399,8 @@
     description: Technologic Systems
   "^techstar,.*":
     description: Shenzhen Techstar Electronics Co., Ltd.
+  "^techwell,.*":
+    description: Techwell, Inc.
   "^teejet,.*":
     description: TeeJet
   "^teltonika,.*":
@@ -1434,6 +1454,8 @@
     description: TPO
   "^tq,.*":
     description: TQ-Systems GmbH
+  "^transpeed,.*":
+    description: Transpeed
   "^traverse,.*":
     description: Traverse Technologies Australia Pty Ltd
   "^tronfy,.*":

diff --git a/Bindings/w1/amd,axi-1wire-host.yaml b/Bindings/w1/amd,axi-1wire-host.yaml
new file mode 100644
index 0000000..ef70fa2
--- /dev/null
+++ b/Bindings/w1/amd,axi-1wire-host.yaml

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD AXI 1-wire bus host for programmable logic
+
+maintainers:
+  - Kris Chaplin <kris.chaplin@amd.com>
+
+properties:
+  compatible:
+    const: amd,axi-1wire-host
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    onewire@a0000000 {
+        compatible = "amd,axi-1wire-host";
+        reg = <0xa0000000 0x10000>;
+        clocks = <&zynqmp_clk 0x47>;
+        interrupts = <GIC_SPI 0x59 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...

diff --git a/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 274519f..64c8f73 100644
--- a/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml

@@ -6,13 +6,13 @@
 
 title: Allwinner A10 Watchdog
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     oneOf:

diff --git a/Bindings/watchdog/alphascale,asm9260-wdt.yaml b/Bindings/watchdog/alphascale,asm9260-wdt.yaml
index fea84f5..6425fe5 100644
--- a/Bindings/watchdog/alphascale,asm9260-wdt.yaml
+++ b/Bindings/watchdog/alphascale,asm9260-wdt.yaml

@@ -6,12 +6,12 @@
 
 title: Alphascale asm9260 Watchdog timer
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Oleksij Rempel <linux@rempel-privat.de>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     const: alphascale,asm9260-wdt

diff --git a/Bindings/watchdog/apple,wdt.yaml b/Bindings/watchdog/apple,wdt.yaml
index 9296811..21872e1 100644
--- a/Bindings/watchdog/apple,wdt.yaml
+++ b/Bindings/watchdog/apple,wdt.yaml

@@ -6,12 +6,12 @@
 
 title: Apple SoC Watchdog
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Sven Peter <sven@svenpeter.dev>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     items:

diff --git a/Bindings/watchdog/arm-smc-wdt.yaml b/Bindings/watchdog/arm-smc-wdt.yaml
index b557385..8e9d0b7 100644
--- a/Bindings/watchdog/arm-smc-wdt.yaml
+++ b/Bindings/watchdog/arm-smc-wdt.yaml

@@ -6,12 +6,12 @@
 
 title: ARM Secure Monitor Call based watchdog
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Julius Werner <jwerner@chromium.org>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     enum:

diff --git a/Bindings/watchdog/brcm,bcm7038-wdt.yaml b/Bindings/watchdog/brcm,bcm7038-wdt.yaml
index 526ff90..e898167 100644
--- a/Bindings/watchdog/brcm,bcm7038-wdt.yaml
+++ b/Bindings/watchdog/brcm,bcm7038-wdt.yaml

@@ -6,14 +6,14 @@
 
 title: BCM63xx and BCM7038 watchdog timer
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
   - Justin Chen <justinpopo6@gmail.com>
   - Rafał Miłecki <rafal@milecki.pl>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     enum:
@@ -29,11 +29,11 @@
       The clock running the watchdog. If no clock is found the driver will
       default to 27000000 Hz.
 
-unevaluatedProperties: false
-
 required:
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     watchdog@f040a7e8 {

diff --git a/Bindings/watchdog/cnxt,cx92755-wdt.yaml b/Bindings/watchdog/cnxt,cx92755-wdt.yaml
index 1844d7e..13236ee 100644
--- a/Bindings/watchdog/cnxt,cx92755-wdt.yaml
+++ b/Bindings/watchdog/cnxt,cx92755-wdt.yaml

@@ -12,12 +12,12 @@
   timer counters. The first timer (called "Timer A") is the only one that can be
   used as watchdog.
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Baruch Siach <baruch@tkos.co.il>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     const: cnxt,cx92755-wdt

diff --git a/Bindings/watchdog/dlg,da9062-watchdog.yaml b/Bindings/watchdog/dlg,da9062-watchdog.yaml
index f058628..c8f6981 100644
--- a/Bindings/watchdog/dlg,da9062-watchdog.yaml
+++ b/Bindings/watchdog/dlg,da9062-watchdog.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/dlg,da9062-watchdog.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog Semiconductor DA9062/61 Watchdog Timer
+title: Dialog Semiconductor DA906{1,2,3} Watchdog Timer
 
 maintainers:
   - Steve Twiss <stwiss.opensource@diasemi.com>
@@ -14,9 +14,13 @@
 
 properties:
   compatible:
-    enum: 
-      - dlg,da9061-watchdog
-      - dlg,da9062-watchdog
+    oneOf:
+      - enum:
+          - dlg,da9062-watchdog
+          - dlg,da9063-watchdog
+      - items:
+          - const: dlg,da9061-watchdog
+          - const: dlg,da9062-watchdog
 
   dlg,use-sw-pm:
     type: boolean

diff --git a/Bindings/watchdog/intel,keembay-wdt.yaml b/Bindings/watchdog/intel,keembay-wdt.yaml
index 1437ff8..8231dde 100644
--- a/Bindings/watchdog/intel,keembay-wdt.yaml
+++ b/Bindings/watchdog/intel,keembay-wdt.yaml

@@ -9,6 +9,9 @@
 maintainers:
   - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     enum:
@@ -37,7 +40,7 @@
   - interrupt-names
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/watchdog/maxim,max63xx.yaml b/Bindings/watchdog/maxim,max63xx.yaml
index 1a6490c..442c21f 100644
--- a/Bindings/watchdog/maxim,max63xx.yaml
+++ b/Bindings/watchdog/maxim,max63xx.yaml

@@ -6,14 +6,14 @@
 
 title: Maxim 63xx Watchdog Timers
 
-allOf:
-  - $ref: watchdog.yaml#
-  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
-
 maintainers:
   - Marc Zyngier <maz@kernel.org>
   - Linus Walleij <linus.walleij@linaro.org>
 
+allOf:
+  - $ref: watchdog.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
 properties:
   compatible:
     enum:

diff --git a/Bindings/watchdog/mediatek,mtk-wdt.yaml b/Bindings/watchdog/mediatek,mtk-wdt.yaml
index cc50283..8d25202 100644
--- a/Bindings/watchdog/mediatek,mtk-wdt.yaml
+++ b/Bindings/watchdog/mediatek,mtk-wdt.yaml

@@ -25,6 +25,7 @@
           - mediatek,mt6735-wdt
           - mediatek,mt6795-wdt
           - mediatek,mt7986-wdt
+          - mediatek,mt7988-wdt
           - mediatek,mt8183-wdt
           - mediatek,mt8186-wdt
           - mediatek,mt8188-wdt

diff --git a/Bindings/watchdog/nxp,pnx4008-wdt.yaml b/Bindings/watchdog/nxp,pnx4008-wdt.yaml
new file mode 100644
index 0000000..35ef940
--- /dev/null
+++ b/Bindings/watchdog/nxp,pnx4008-wdt.yaml

@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/nxp,pnx4008-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PNX watchdog timer
+
+maintainers:
+  - Roland Stigge <stigge@antcom.de>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: nxp,pnx4008-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@4003c000 {
+        compatible = "nxp,pnx4008-wdt";
+        reg = <0x4003c000 0x1000>;
+        timeout-sec = <10>;
+    };

diff --git a/Bindings/watchdog/pnx4008-wdt.txt b/Bindings/watchdog/pnx4008-wdt.txt
deleted file mode 100644
index 4b76bec..0000000
--- a/Bindings/watchdog/pnx4008-wdt.txt
+++ /dev/null

@@ -1,17 +0,0 @@
-* NXP PNX watchdog timer
-
-Required properties:
-- compatible: must be "nxp,pnx4008-wdt"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-Example:
-
-	watchdog@4003c000 {
-		compatible = "nxp,pnx4008-wdt";
-		reg = <0x4003C000 0x1000>;
-		timeout-sec = <10>;
-	};

diff --git a/Bindings/watchdog/qca,ar7130-wdt.yaml b/Bindings/watchdog/qca,ar7130-wdt.yaml
new file mode 100644
index 0000000..82040ca
--- /dev/null
+++ b/Bindings/watchdog/qca,ar7130-wdt.yaml

@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qca,ar7130-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Gabor Juhos <juhosg@openwrt.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: qca,ar7130-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@18060008 {
+        compatible = "qca,ar7130-wdt";
+        reg = <0x18060008 0x8>;
+    };

diff --git a/Bindings/watchdog/qca-ar7130-wdt.txt b/Bindings/watchdog/qca-ar7130-wdt.txt
deleted file mode 100644
index 7a89e5f..0000000
--- a/Bindings/watchdog/qca-ar7130-wdt.txt
+++ /dev/null

@@ -1,13 +0,0 @@
-* Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: must be "qca,ar7130-wdt"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Example:
-
-wdt@18060008 {
-	compatible = "qca,ar9330-wdt", "qca,ar7130-wdt";
-	reg = <0x18060008 0x8>;
-};

diff --git a/Bindings/watchdog/qcom,pm8916-wdt.yaml b/Bindings/watchdog/qcom,pm8916-wdt.yaml
index 568eb84..dc6af20 100644
--- a/Bindings/watchdog/qcom,pm8916-wdt.yaml
+++ b/Bindings/watchdog/qcom,pm8916-wdt.yaml

@@ -30,22 +30,27 @@
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/spmi/spmi.h>
 
-    pmic@0 {
-        compatible = "qcom,pm8916", "qcom,spmi-pmic";
-        reg = <0x0 SPMI_USID>;
-        #address-cells = <1>;
+    spmi {
+        #address-cells = <2>;
         #size-cells = <0>;
 
-        pon@800 {
-            compatible = "qcom,pm8916-pon";
-            reg = <0x800>;
-            mode-bootloader = <0x2>;
-            mode-recovery = <0x1>;
+        pmic@0 {
+            compatible = "qcom,pm8916", "qcom,spmi-pmic";
+            reg = <0x0 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-            watchdog {
-                compatible = "qcom,pm8916-wdt";
-                interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
-                timeout-sec = <60>;
+            pon@800 {
+                compatible = "qcom,pm8916-pon";
+                reg = <0x800>;
+                mode-bootloader = <0x2>;
+                mode-recovery = <0x1>;
+
+                watchdog {
+                    compatible = "qcom,pm8916-wdt";
+                    interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+                    timeout-sec = <60>;
+                };
             };
         };
     };

diff --git a/Bindings/watchdog/qcom-wdt.yaml b/Bindings/watchdog/qcom-wdt.yaml
index c12bc85..a4f35c5 100644
--- a/Bindings/watchdog/qcom-wdt.yaml
+++ b/Bindings/watchdog/qcom-wdt.yaml

@@ -123,7 +123,7 @@
         compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
         reg = <0x17c10000 0x1000>;
         clocks = <&sleep_clk>;
-        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
         timeout-sec = <10>;
     };
 

diff --git a/Bindings/watchdog/realtek,rtd119x.txt b/Bindings/watchdog/realtek,rtd119x.txt
deleted file mode 100644
index 0565305..0000000
--- a/Bindings/watchdog/realtek,rtd119x.txt
+++ /dev/null

@@ -1,17 +0,0 @@
-Realtek RTD1295 Watchdog
-========================
-
-Required properties:
-
-- compatible :  Should be "realtek,rtd1295-watchdog"
-- reg        :  Specifies the physical base address and size of registers
-- clocks     :  Specifies one clock input
-
-
-Example:
-
-	watchdog@98007680 {
-		compatible = "realtek,rtd1295-watchdog";
-		reg = <0x98007680 0x100>;
-		clocks = <&osc27M>;
-	};

diff --git a/Bindings/watchdog/realtek,rtd1295-watchdog.yaml b/Bindings/watchdog/realtek,rtd1295-watchdog.yaml
new file mode 100644
index 0000000..2a0ea16
--- /dev/null
+++ b/Bindings/watchdog/realtek,rtd1295-watchdog.yaml

@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,rtd1295-watchdog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTD1295 Watchdog
+
+maintainers:
+  - Andreas Färber <afaerber@suse.de>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: realtek,rtd1295-watchdog
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@98007680 {
+        compatible = "realtek,rtd1295-watchdog";
+        reg = <0x98007680 0x100>;
+        clocks = <&osc27M>;
+    };

diff --git a/Bindings/watchdog/samsung-wdt.yaml b/Bindings/watchdog/samsung-wdt.yaml
index 8fb6656..77a5ddd 100644
--- a/Bindings/watchdog/samsung-wdt.yaml
+++ b/Bindings/watchdog/samsung-wdt.yaml

@@ -16,14 +16,20 @@
 
 properties:
   compatible:
-    enum:
-      - samsung,s3c2410-wdt                   # for S3C2410
-      - samsung,s3c6410-wdt                   # for S3C6410, S5PV210 and Exynos4
-      - samsung,exynos5250-wdt                # for Exynos5250
-      - samsung,exynos5420-wdt                # for Exynos5420
-      - samsung,exynos7-wdt                   # for Exynos7
-      - samsung,exynos850-wdt                 # for Exynos850
-      - samsung,exynosautov9-wdt              # for Exynosautov9
+    oneOf:
+      - enum:
+          - google,gs101-wdt                      # for Google gs101
+          - samsung,s3c2410-wdt                   # for S3C2410
+          - samsung,s3c6410-wdt                   # for S3C6410, S5PV210 and Exynos4
+          - samsung,exynos5250-wdt                # for Exynos5250
+          - samsung,exynos5420-wdt                # for Exynos5420
+          - samsung,exynos7-wdt                   # for Exynos7
+          - samsung,exynos850-wdt                 # for Exynos850
+          - samsung,exynosautov9-wdt              # for Exynosautov9
+      - items:
+          - enum:
+              - tesla,fsd-wdt
+          - const: samsung,exynos7-wdt
 
   reg:
     maxItems: 1
@@ -42,13 +48,14 @@
   samsung,cluster-index:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      Index of CPU cluster on which watchdog is running (in case of Exynos850)
+      Index of CPU cluster on which watchdog is running (in case of Exynos850
+      or Google gs101).
 
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the PMU system controller node (in case of Exynos5250,
-      Exynos5420, Exynos7 and Exynos850).
+      Exynos5420, Exynos7, Exynos850 and gs101).
 
 required:
   - compatible
@@ -64,6 +71,7 @@
         compatible:
           contains:
             enum:
+              - google,gs101-wdt
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
               - samsung,exynos7-wdt
@@ -77,6 +85,7 @@
         compatible:
           contains:
             enum:
+              - google,gs101-wdt
               - samsung,exynos850-wdt
               - samsung,exynosautov9-wdt
     then:

diff --git a/Bindings/watchdog/snps,dw-wdt.yaml b/Bindings/watchdog/snps,dw-wdt.yaml
index 76eceed..c7aab04 100644
--- a/Bindings/watchdog/snps,dw-wdt.yaml
+++ b/Bindings/watchdog/snps,dw-wdt.yaml

@@ -6,12 +6,12 @@
 
 title: Synopsys Designware Watchdog Timer
 
-allOf:
-  - $ref: watchdog.yaml#
-
 maintainers:
   - Jamie Iles <jamie@jamieiles.com>
 
+allOf:
+  - $ref: watchdog.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -73,13 +73,13 @@
     minItems: 16
     maxItems: 16
 
-unevaluatedProperties: false
-
 required:
   - compatible
   - reg
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     watchdog@ffd02000 {

diff --git a/Bindings/watchdog/technologic,ts7200-wdt.yaml b/Bindings/watchdog/technologic,ts7200-wdt.yaml
new file mode 100644
index 0000000..7e4bfef
--- /dev/null
+++ b/Bindings/watchdog/technologic,ts7200-wdt.yaml

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/technologic,ts7200-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems TS-72xx based SBCs watchdog
+
+maintainers:
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: technologic,ts7200-wdt
+      - items:
+          - enum:
+              - technologic,ts7300-wdt
+              - technologic,ts7260-wdt
+              - technologic,ts7250-wdt
+          - const: technologic,ts7200-wdt
+
+  reg:
+    items:
+      - description: control register
+      - description: feed register
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@23800000 {
+      compatible = "technologic,ts7200-wdt";
+      reg = <0x23800000 0x01>, <0x23c00000 0x01>;
+      timeout-sec = <30>;
+    };
+
+...
commit	93743d241c64bc1f7ecbf3262d1683176551e11f	[log] [tgz]
author	Tom Rini <trini@konsulko.com>	Mon Apr 01 09:08:13 2024 -0400
committer	Tom Rini <trini@konsulko.com>	Mon Apr 01 09:08:13 2024 -0400
tree	11abd1331cf3b50d686ebe65a24e69373bac27e4
parent	53633a893a06bd5a0c807287d9cc29337806eaf7 [diff]