Blame - drivers/phy/Kconfig - platform/external/u-boot

blob: 8f767877e73c6bf2ab9ba40c36cf346f7b1b8fda [file] [log] [blame]

Jean-Jacques Hiblot	72e5016	2017-04-24 11:51:27 +0200	[diff] [blame]	1
				2	menu "PHY Subsystem"
				3
				4	config PHY
				5	bool "PHY Core"
				6	depends on DM
				7	help
				8	PHY support.
				9
				10	This framework is designed to provide a generic interface for PHY
				11	devices. PHY devices are dedicated hardware that handle the physical
				12	layer of the protocols in the OSI model.
				13	PHYs are commonly used for high speed interfaces such as Serial-ATA
				14	or PCI express.
				15	The API provides functions to initialize/deinitialize the
				16	PHY, power on/off the PHY, and reset the PHY. It's meant to be as
				17	compatible as possible with the equivalent framework found in the
				18	linux kernel.
				19
				20	config SPL_PHY
				21	bool "PHY Core in SPL"
Adam Ford	a074667	2019-08-24 13:50:34 -0500	[diff] [blame]	22	depends on DM && SPL
Jean-Jacques Hiblot	72e5016	2017-04-24 11:51:27 +0200	[diff] [blame]	23	help
				24	PHY support in SPL.
				25
				26	This framework is designed to provide a generic interface for PHY
				27	devices. PHY devices are dedicated hardware that handle the physical
				28	layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
				29	PHYs are commonly used for high speed interfaces such as Serial-ATA
				30	or PCI express.
				31	The API provides functions to initialize/deinitialize the
				32	PHY, power on/off the PHY, and reset the PHY. It's meant to be as
				33	compatible as possible with the equivalent framework found in the
				34	linux kernel.
				35
Jean-Jacques Hiblot	86322f5	2017-04-24 11:51:28 +0200	[diff] [blame]	36	config PHY_SANDBOX
				37	bool "Sandbox PHY support"
				38	depends on SANDBOX
				39	depends on PHY
				40	help
				41	This select a dummy sandbox PHY driver. It used only to implement
				42	the unit tests for the phy framework
				43
Jean-Jacques Hiblot	3b63db3	2017-07-24 15:18:15 +0200	[diff] [blame]	44	config NOP_PHY
				45	bool "NOP PHY driver"
				46	depends on PHY
				47	help
				48	Support for a no-op PHY driver (stubbed PHY driver).
				49
				50	This is useful when a driver uses the PHY framework but no real PHY
				51	hardware exists.
				52
				53	config SPL_NOP_PHY
				54	bool "NOP PHY driver in SPL"
				55	depends on SPL_PHY
				56	help
				57	Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
				58
				59	This is useful when a driver uses the PHY framework but no real PHY
				60	hardware exists.
				61
Neil Armstrong	afef205	2020-12-29 14:58:58 +0100	[diff] [blame]	62	config MIPI_DPHY_HELPERS
				63	bool "MIPI D-PHY support helpers"
				64	help
				65	Provides a number of helpers a core functions for MIPI D-PHY drivers.
				66
Stephan Gerhold	4559df9	2021-07-08 20:33:49 +0200	[diff] [blame]	67	config AB8500_USB_PHY
				68	bool "AB8500 USB PHY Driver"
				69	depends on PHY && PMIC_AB8500
				70	help
				71	Support for the USB OTG PHY in ST-Ericsson AB8500.
				72
Mark Kettenis	b99c635	2023-07-14 22:21:42 +0200	[diff] [blame]	73	config APPLE_ATCPHY
				74	bool "Apple Type-C PHY Driver"
				75	depends on PHY && ARCH_APPLE
				76	default y
				77	help
				78	Support for the Apple Type-C PHY.
				79
				80	This is a dummy driver since the PHY is initialized
				81	sufficiently by previous stage firmware.
				82
Álvaro Fernández Rojas	8e948c6	2018-02-04 21:11:15 +0100	[diff] [blame]	83	config BCM6318_USBH_PHY
				84	bool "BCM6318 USBH PHY support"
				85	depends on PHY && ARCH_BMIPS
				86	select POWER_DOMAIN
				87	help
				88	Support for the Broadcom MIPS BCM6318 USBH PHY.
				89
Álvaro Fernández Rojas	bcb9b50	2018-02-04 11:18:24 +0100	[diff] [blame]	90	config BCM6348_USBH_PHY
				91	bool "BCM6348 USBH PHY support"
				92	depends on PHY && ARCH_BMIPS
				93	help
				94	Support for the Broadcom MIPS BCM6348 USBH PHY.
				95
Álvaro Fernández Rojas	190c36b	2018-02-04 11:19:11 +0100	[diff] [blame]	96	config BCM6358_USBH_PHY
				97	bool "BCM6358 USBH PHY support"
				98	depends on PHY && ARCH_BMIPS
				99	help
				100	Support for the Broadcom MIPS BCM6358 USBH PHY.
				101
Álvaro Fernández Rojas	f55c153	2018-02-04 21:10:13 +0100	[diff] [blame]	102	config BCM6368_USBH_PHY
				103	bool "BCM6368 USBH PHY support"
				104	depends on PHY && ARCH_BMIPS
				105	help
				106	Support for the Broadcom MIPS BCM6368 USBH PHY.
				107
Srinath Mannam	3151fdd	2020-04-02 16:08:12 +0530	[diff] [blame]	108	config BCM_SR_PCIE_PHY
				109	bool "Broadcom Stingray PCIe PHY driver"
				110	depends on PHY
				111	help
				112	Enable this to support the Broadcom Stingray PCIe PHY
				113	If unsure, say N.
				114
Adam Ford	fc58263	2019-07-10 13:59:09 -0500	[diff] [blame]	115	config PHY_DA8XX_USB
				116	tristate "TI DA8xx USB PHY Driver"
				117	depends on PHY && ARCH_DAVINCI
				118	help
				119	Enable this to support the USB PHY on DA8xx SoCs.
				120
Jean-Jacques Hiblot	982082d	2017-04-24 11:51:29 +0200	[diff] [blame]	121	config PIPE3_PHY
				122	bool "Support omap's PIPE3 PHY"
Jean-Jacques Hiblot	6b26aae	2017-07-07 12:13:34 +0200	[diff] [blame]	123	depends on PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot	982082d	2017-04-24 11:51:29 +0200	[diff] [blame]	124	help
				125	Support for the omap PIPE3 phy for sata
				126
				127	This PHY is found on omap devices supporting SATA such as dra7, am57x
				128	and omap5
				129
				130	config SPL_PIPE3_PHY
				131	bool "Support omap's PIPE3 PHY in SPL"
Jean-Jacques Hiblot	6b26aae	2017-07-07 12:13:34 +0200	[diff] [blame]	132	depends on SPL_PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot	982082d	2017-04-24 11:51:29 +0200	[diff] [blame]	133	help
				134	Support for the omap PIPE3 phy for sata in SPL
				135
				136	This PHY is found on omap devices supporting SATA such as dra7, am57x
				137	and omap5
				138
Sekhar Nori	888e1ca	2019-08-01 19:12:58 +0530	[diff] [blame]	139	config AM654_PHY
				140	tristate "TI AM654 SERDES support"
				141	depends on PHY && ARCH_K3
				142	select REGMAP
				143	select SYSCON
				144	help
				145	This option enables support for TI AM654 SerDes PHY used for
				146	PCIe.
				147
Patrice Chotard	b7ca56d	2017-09-05 11:04:21 +0200	[diff] [blame]	148	config STI_USB_PHY
				149	bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
				150	depends on PHY && ARCH_STI
				151	help
				152	This is the generic phy driver for the picoPHY ports
				153	used by USB2 and USB3 Host controllers available on
				154	STiH407 SoC families.
				155
Marek Vasut	6642588	2018-08-05 15:22:19 +0200	[diff] [blame]	156	config PHY_RCAR_GEN2
				157	tristate "Renesas R-Car Gen2 USB PHY"
				158	depends on PHY && RCAR_GEN2
				159	help
				160	Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
				161	PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
				162	allows configuring the module multiplexing.
				163
Marek Vasut	6cfc3d6	2018-10-02 22:31:47 +0200	[diff] [blame]	164	config PHY_RCAR_GEN3
				165	tristate "Renesas R-Car Gen3 USB PHY"
				166	depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
				167	default y if RCAR_GEN3
				168	help
				169	Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
				170	PHY connected to EHCI USB module and controls USB OTG operation.
				171
Patrice Chotard	3b29121	2018-04-27 11:01:55 +0200	[diff] [blame]	172	config PHY_STM32_USBPHYC
				173	tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
				174	depends on PHY && ARCH_STM32MP
				175	help
				176	Enable this to support the High-Speed USB transceiver that is part of
				177	STMicroelectronics STM32 SoCs.
				178
				179	This driver controls the entire USB PHY block: the USB PHY controller
				180	(USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
				181	used by an HS USB Host controller, and the second one is shared
				182	between an HS USB OTG controller and an HS USB Host controller,
				183	selected by an USB switch.
				184
Beniamino Galvani	df42f32	2019-08-18 15:42:54 +0200	[diff] [blame]	185	config MESON_GXBB_USB_PHY
				186	bool "Amlogic Meson GXBB USB PHY"
				187	depends on PHY && ARCH_MESON && MESON_GXBB
				188	imply REGMAP
				189	help
				190	This is the generic phy driver for the Amlogic Meson GXBB
				191	USB2 PHY.
				192
Neil Armstrong	2960e27	2018-04-11 17:08:02 +0200	[diff] [blame]	193	config MESON_GXL_USB_PHY
				194	bool "Amlogic Meson GXL USB PHYs"
Neil Armstrong	0ae8724	2020-09-10 10:48:16 +0200	[diff] [blame]	195	depends on PHY && ARCH_MESON && (MESON_GXL \|\| MESON_GXM \|\| MESON_AXG)
Neil Armstrong	2960e27	2018-04-11 17:08:02 +0200	[diff] [blame]	196	imply REGMAP
				197	help
				198	This is the generic phy driver for the Amlogic Meson GXL
				199	USB2 and USB3 PHYS.
				200
Neil Armstrong	277d916	2019-02-19 15:17:29 +0100	[diff] [blame]	201	config MESON_G12A_USB_PHY
				202	bool "Amlogic Meson G12A USB PHYs"
Alexey Romanov	5533c88	2023-10-05 11:54:26 +0300	[diff] [blame]	203	depends on PHY && ARCH_MESON && (MESON_G12A \|\| MESON_A1)
Neil Armstrong	277d916	2019-02-19 15:17:29 +0100	[diff] [blame]	204	imply REGMAP
				205	help
				206	This is the generic phy driver for the Amlogic Meson G12A
				207	USB2 and USB3 PHYS.
				208
Neil Armstrong	7ef1950	2020-12-29 14:59:00 +0100	[diff] [blame]	209	config MESON_AXG_MIPI_DPHY
				210	bool "Amlogic Meson AXG MIPI D-PHY"
				211	depends on PHY && ARCH_MESON && MESON_AXG
				212	select MIPI_DPHY_HELPERS
				213	imply REGMAP
				214	help
				215	This is the generic phy driver for the Amlogic Meson AXG
				216	MIPI D-PHY.
				217
Neil Armstrong	4547551	2020-12-29 14:59:01 +0100	[diff] [blame]	218	config MESON_AXG_MIPI_PCIE_ANALOG_PHY
				219	bool "Amlogic Meson AXG MIPI PCIe Analog PHY"
				220	depends on PHY && ARCH_MESON && MESON_AXG
				221	select MIPI_DPHY_HELPERS
				222	imply REGMAP
				223	help
				224	This is the generic phy driver for the Amlogic Meson AXG
				225	MIPI PCIe Analog PHY.
				226
Jean-Jacques Hiblot	668257e	2018-11-29 10:57:39 +0100	[diff] [blame]	227	config OMAP_USB2_PHY
				228	bool "Support OMAP's USB2 PHY"
				229	depends on PHY
				230	depends on SYSCON
				231	help
				232	Support for the OMAP's USB2 PHY.
				233
				234	This PHY is found on OMAP devices supporting USB2.
				235
Jean-Jacques Hiblot	4b12783	2018-12-04 11:12:59 +0100	[diff] [blame]	236
				237	config KEYSTONE_USB_PHY
				238	bool "Support TI Keystone USB PHY"
				239	depends on PHY
				240	depends on ARCH_KEYSTONE
				241	help
				242	Support for the USB PHY found on some Keystone (k2) processors
				243
				244	This PHY is found on some Keystone (K2) devices supporting USB.
				245
Weijie Gao	b4f214f	2020-11-12 16:36:48 +0800	[diff] [blame]	246	config MT7620_USB_PHY
				247	bool "MediaTek MT7620 USB PHY support"
				248	depends on PHY
				249	depends on SOC_MT7620
				250	help
				251	Support the intergated USB PHY in MediaTek MT7620 SoC
				252
Stefan Roese	d7d7606	2019-04-05 13:44:43 +0200	[diff] [blame]	253	config MT76X8_USB_PHY
				254	bool "MediaTek MT76x8 (7628/88) USB PHY support"
				255	depends on PHY
Weijie Gao	4cce511	2019-09-25 17:45:31 +0800	[diff] [blame]	256	depends on SOC_MT7628
Stefan Roese	d7d7606	2019-04-05 13:44:43 +0200	[diff] [blame]	257	help
				258	Support the USB PHY in MT76x8 SoCs
				259
				260	This PHY is found on MT76x8 devices supporting USB.
				261
Ryder Lee	235bad0	2019-08-22 12:26:50 +0200	[diff] [blame]	262	config PHY_MTK_TPHY
				263	bool "MediaTek T-PHY Driver"
				264	depends on PHY
Weijie Gao	be3dc92	2022-05-20 11:23:01 +0800	[diff] [blame]	265	depends on ARCH_MEDIATEK \|\| SOC_MT7621
Ryder Lee	235bad0	2019-08-22 12:26:50 +0200	[diff] [blame]	266	help
				267	MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
				268	SATA, and meanwhile supports two version T-PHY which have
				269	different banks layout, the T-PHY with shared banks between
				270	multi-ports is first version, otherwise is second veriosn,
				271	so you can easily distinguish them by banks layout.
				272
Jim Liu	fdd08f8	2022-06-21 17:03:38 +0800	[diff] [blame]	273	config PHY_NPCM_USB
				274	bool "Nuvoton NPCM USB PHY support"
				275	depends on PHY
				276	depends on ARCH_NPCM
				277	help
				278	Support the USB PHY in NPCM SoCs
				279
Ye Li	4266dc1	2021-02-21 08:26:21 -0800	[diff] [blame]	280	config PHY_IMX8MQ_USB
Marek Vasut	77ee5d3	2022-04-01 03:18:31 +0200	[diff] [blame]	281	bool "NXP i.MX8MQ/i.MX8MP USB PHY Driver"
Ye Li	4266dc1	2021-02-21 08:26:21 -0800	[diff] [blame]	282	depends on PHY
Marek Vasut	77ee5d3	2022-04-01 03:18:31 +0200	[diff] [blame]	283	depends on IMX8MQ \|\| IMX8MP
Ye Li	4266dc1	2021-02-21 08:26:21 -0800	[diff] [blame]	284	help
Marek Vasut	77ee5d3	2022-04-01 03:18:31 +0200	[diff] [blame]	285	Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC
Ye Li	4266dc1	2021-02-21 08:26:21 -0800	[diff] [blame]	286
Sumit Garg	c214ebc	2024-03-21 20:25:02 +0530	[diff] [blame]	287	config PHY_IMX8M_PCIE
				288	bool "NXP i.MX8MM/i.MX8MP PCIe PHY Driver"
				289	depends on PHY
				290	depends on IMX8MM \|\| IMX8MP
				291	select REGMAP
				292	select SYSCON
				293	help
				294	Support the PCIe PHY in NXP i.MX8MM or i.MX8MP SoC
				295
				296	This PHY is found on i.MX8M devices supporting PCIe.
				297
Michal Simek	1d78d68	2022-01-06 09:49:41 +0100	[diff] [blame]	298	config PHY_XILINX_ZYNQMP
				299	tristate "Xilinx ZynqMP PHY driver"
				300	depends on PHY && ARCH_ZYNQMP
				301	help
				302	Enable this to support ZynqMP High Speed Gigabit Transceiver
				303	that is part of ZynqMP SoC.
				304
Jagan Teki	ac97a9e	2020-05-26 11:33:44 +0800	[diff] [blame]	305	source "drivers/phy/rockchip/Kconfig"
Alan Douglas	39b8233	2021-07-21 21:28:36 +0530	[diff] [blame]	306	source "drivers/phy/cadence/Kconfig"
Jean-Jacques Hiblot	1a83f99	2021-07-21 21:28:38 +0530	[diff] [blame]	307	source "drivers/phy/ti/Kconfig"
Sumit Garg	23ba5f3	2022-08-04 19:57:09 +0530	[diff] [blame]	308	source "drivers/phy/qcom/Kconfig"
Marek Vasut	08c5614	2023-03-19 18:09:43 +0100	[diff] [blame]	309	source "drivers/phy/renesas/Kconfig"
Alan Douglas	39b8233	2021-07-21 21:28:36 +0530	[diff] [blame]	310
Jean-Jacques Hiblot	72e5016	2017-04-24 11:51:27 +0200	[diff] [blame]	311	endmenu