blob: 5384584c184749e975165240db5d2a9b194bdea0 [file] [log] [blame]
Poonam Aggrwal49249e12011-02-09 19:17:53 +00001/*
2 * Copyright 2010-2011 Freescale Semiconductor, Inc.
3 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Poonam Aggrwal49249e12011-02-09 19:17:53 +00005 */
6
7/*
8 * P010 RDB board configuration file
9 */
10
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
14#ifdef CONFIG_36BIT
15#define CONFIG_PHYS_64BIT
16#endif
Ying Zhang653c28f2014-11-06 13:05:08 +080017#define CONFIG_DISPLAY_BOARDINFO
Poonam Aggrwal49249e12011-02-09 19:17:53 +000018
Poonam Aggrwal49249e12011-02-09 19:17:53 +000019#define CONFIG_P1010
Prabhakar Kushwaha74fa22e2013-04-16 13:27:44 +053020#define CONFIG_E500 /* BOOKE e500 family */
21#include <asm/config_mpc85xx.h>
Dipen Dudhatd793e5a2011-07-28 14:47:28 -050022#define CONFIG_NAND_FSL_IFC
Poonam Aggrwal49249e12011-02-09 19:17:53 +000023
24#ifdef CONFIG_SDCARD
Ying Zhangc9e1f582014-01-24 15:50:09 +080025#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
26#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
27#define CONFIG_SPL_ENV_SUPPORT
28#define CONFIG_SPL_SERIAL_SUPPORT
29#define CONFIG_SPL_MMC_SUPPORT
30#define CONFIG_SPL_MMC_MINIMAL
31#define CONFIG_SPL_FLUSH_IMAGE
32#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
33#define CONFIG_SPL_LIBGENERIC_SUPPORT
34#define CONFIG_SPL_LIBCOMMON_SUPPORT
35#define CONFIG_SPL_I2C_SUPPORT
36#define CONFIG_FSL_LAW /* Use common FSL init code */
37#define CONFIG_SYS_TEXT_BASE 0x11001000
38#define CONFIG_SPL_TEXT_BASE 0xD0001000
39#define CONFIG_SPL_PAD_TO 0x18000
40#define CONFIG_SPL_MAX_SIZE (96 * 1024)
41#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10)
42#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000)
43#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000)
44#define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10)
45#define CONFIG_SYS_MPC85XX_NO_RESETVEC
46#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
47#define CONFIG_SPL_MMC_BOOT
48#ifdef CONFIG_SPL_BUILD
49#define CONFIG_SPL_COMMON_INIT_DDR
50#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +000051#endif
52
53#ifdef CONFIG_SPIFLASH
Ying Zhangc9e1f582014-01-24 15:50:09 +080054#ifdef CONFIG_SECURE_BOOT
Poonam Aggrwal49249e12011-02-09 19:17:53 +000055#define CONFIG_RAMBOOT_SPIFLASH
56#define CONFIG_SYS_TEXT_BASE 0x11000000
Ruchika Gupta84e0fb42014-09-29 11:14:35 +053057#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
Ying Zhangc9e1f582014-01-24 15:50:09 +080058#else
Ying Zhangc9e1f582014-01-24 15:50:09 +080059#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
60#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
61#define CONFIG_SPL_ENV_SUPPORT
62#define CONFIG_SPL_SERIAL_SUPPORT
63#define CONFIG_SPL_SPI_SUPPORT
64#define CONFIG_SPL_SPI_FLASH_SUPPORT
65#define CONFIG_SPL_SPI_FLASH_MINIMAL
66#define CONFIG_SPL_FLUSH_IMAGE
67#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
68#define CONFIG_SPL_LIBGENERIC_SUPPORT
69#define CONFIG_SPL_LIBCOMMON_SUPPORT
70#define CONFIG_SPL_I2C_SUPPORT
71#define CONFIG_FSL_LAW /* Use common FSL init code */
72#define CONFIG_SYS_TEXT_BASE 0x11001000
73#define CONFIG_SPL_TEXT_BASE 0xD0001000
74#define CONFIG_SPL_PAD_TO 0x18000
75#define CONFIG_SPL_MAX_SIZE (96 * 1024)
76#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)
77#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
78#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
79#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10)
80#define CONFIG_SYS_MPC85XX_NO_RESETVEC
81#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
82#define CONFIG_SPL_SPI_BOOT
83#ifdef CONFIG_SPL_BUILD
84#define CONFIG_SPL_COMMON_INIT_DDR
85#endif
86#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +000087#endif
88
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +053089#ifdef CONFIG_NAND
Ying Zhangc9e1f582014-01-24 15:50:09 +080090#ifdef CONFIG_SECURE_BOOT
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +053091#define CONFIG_SPL_INIT_MINIMAL
92#define CONFIG_SPL_SERIAL_SUPPORT
93#define CONFIG_SPL_NAND_SUPPORT
Prabhakar Kushwahafbe76ae2013-12-11 12:42:11 +053094#define CONFIG_SPL_NAND_BOOT
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +053095#define CONFIG_SPL_FLUSH_IMAGE
96#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
97
98#define CONFIG_SYS_TEXT_BASE 0x00201000
99#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
100#define CONFIG_SPL_MAX_SIZE 8192
101#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
102#define CONFIG_SPL_RELOC_STACK 0x00100000
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +0530103#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530104#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
105#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
106#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
107#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
Ying Zhangc9e1f582014-01-24 15:50:09 +0800108#else
Ying Zhangc9e1f582014-01-24 15:50:09 +0800109#ifdef CONFIG_TPL_BUILD
110#define CONFIG_SPL_NAND_BOOT
111#define CONFIG_SPL_FLUSH_IMAGE
112#define CONFIG_SPL_ENV_SUPPORT
113#define CONFIG_SPL_NAND_INIT
114#define CONFIG_SPL_SERIAL_SUPPORT
115#define CONFIG_SPL_LIBGENERIC_SUPPORT
116#define CONFIG_SPL_LIBCOMMON_SUPPORT
117#define CONFIG_SPL_I2C_SUPPORT
118#define CONFIG_SPL_NAND_SUPPORT
119#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
120#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
121#define CONFIG_SPL_COMMON_INIT_DDR
122#define CONFIG_SPL_MAX_SIZE (128 << 10)
123#define CONFIG_SPL_TEXT_BASE 0xD0001000
124#define CONFIG_SYS_MPC85XX_NO_RESETVEC
125#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10)
126#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000)
127#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000)
128#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
129#elif defined(CONFIG_SPL_BUILD)
130#define CONFIG_SPL_INIT_MINIMAL
131#define CONFIG_SPL_SERIAL_SUPPORT
132#define CONFIG_SPL_NAND_SUPPORT
133#define CONFIG_SPL_NAND_MINIMAL
134#define CONFIG_SPL_FLUSH_IMAGE
135#define CONFIG_SPL_TEXT_BASE 0xff800000
136#define CONFIG_SPL_MAX_SIZE 8192
137#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
138#define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000
139#define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000
140#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10)
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500141#endif
Ying Zhangc9e1f582014-01-24 15:50:09 +0800142#define CONFIG_SPL_PAD_TO 0x20000
143#define CONFIG_TPL_PAD_TO 0x20000
144#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
145#define CONFIG_SYS_TEXT_BASE 0x11001000
146#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
147#endif
148#endif
Ruchika Gupta2f439e82011-06-08 22:52:48 -0500149
150#ifdef CONFIG_NAND_SECBOOT /* NAND Boot */
151#define CONFIG_RAMBOOT_NAND
152#define CONFIG_SYS_TEXT_BASE 0x11000000
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +0530153#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
Ruchika Gupta2f439e82011-06-08 22:52:48 -0500154#endif
155
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000156#ifndef CONFIG_SYS_TEXT_BASE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +0530157#define CONFIG_SYS_TEXT_BASE 0xeff40000
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000158#endif
159
160#ifndef CONFIG_RESET_VECTOR_ADDRESS
161#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
162#endif
163
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530164#ifdef CONFIG_SPL_BUILD
165#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
166#else
167#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000168#endif
169
170/* High Level Configuration Options */
171#define CONFIG_BOOKE /* BOOKE */
172#define CONFIG_E500 /* BOOKE e500 family */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000173#define CONFIG_FSL_IFC /* Enable IFC Support */
Ruchika Gupta737537e2014-10-15 11:35:31 +0530174#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000175#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
176
177#define CONFIG_PCI /* Enable PCI/PCIE */
178#if defined(CONFIG_PCI)
Robert P. J. Dayb38eaec2016-05-03 19:52:49 -0400179#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
180#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000181#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
Gabor Juhos842033e2013-05-30 07:06:12 +0000182#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000183#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
184#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
185
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000186#define CONFIG_CMD_PCI
187
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000188/*
189 * PCI Windows
190 * Memory space is mapped 1-1, but I/O space must start from 0.
191 */
192/* controller 1, Slot 1, tgtid 1, Base address a000 */
193#define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot"
194#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
195#ifdef CONFIG_PHYS_64BIT
196#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
197#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
198#else
199#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
200#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
201#endif
202#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
203#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
204#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
205#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
206#ifdef CONFIG_PHYS_64BIT
207#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
208#else
209#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
210#endif
211
212/* controller 2, Slot 2, tgtid 2, Base address 9000 */
Shengzhou Liue512c502013-09-13 14:46:03 +0800213#if defined(CONFIG_P1010RDB_PA)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000214#define CONFIG_SYS_PCIE2_NAME "PCIe Slot"
Shengzhou Liue512c502013-09-13 14:46:03 +0800215#elif defined(CONFIG_P1010RDB_PB)
216#define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot"
217#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000218#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
219#ifdef CONFIG_PHYS_64BIT
220#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
221#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
222#else
223#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
224#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
225#endif
226#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
227#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
228#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
229#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
230#ifdef CONFIG_PHYS_64BIT
231#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
232#else
233#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
234#endif
235
236#define CONFIG_PCI_PNP /* do pci plug-and-play */
237
238#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
239#define CONFIG_DOS_PARTITION
240#endif
241
242#define CONFIG_FSL_LAW /* Use common FSL init code */
243#define CONFIG_TSEC_ENET
244#define CONFIG_ENV_OVERWRITE
245
246#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */
247#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */
248
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000249#define CONFIG_MISC_INIT_R
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000250#define CONFIG_HWCONFIG
251/*
252 * These can be toggled for performance analysis, otherwise use default.
253 */
254#define CONFIG_L2_CACHE /* toggle L2 cache */
255#define CONFIG_BTB /* toggle branch predition */
256
257#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
258
259#define CONFIG_ENABLE_36BIT_PHYS
260
261#ifdef CONFIG_PHYS_64BIT
262#define CONFIG_ADDR_MAP 1
263#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
264#endif
265
Zhao Qiangc3cc02a2013-11-26 13:59:15 +0800266#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000267#define CONFIG_SYS_MEMTEST_END 0x1fffffff
268#define CONFIG_PANIC_HANG /* do not reset board on panic */
269
270/* DDR Setup */
York Sun5614e712013-09-30 09:22:09 -0700271#define CONFIG_SYS_FSL_DDR3
York Sun1ba62f12012-02-29 12:36:51 +0000272#define CONFIG_SYS_DDR_RAW_TIMING
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000273#define CONFIG_DDR_SPD
274#define CONFIG_SYS_SPD_BUS_NUM 1
275#define SPD_EEPROM_ADDRESS 0x52
276
277#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
278
279#ifndef __ASSEMBLY__
280extern unsigned long get_sdram_size(void);
281#endif
282#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
283#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
284#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
285
286#define CONFIG_DIMM_SLOTS_PER_CTLR 1
287#define CONFIG_CHIP_SELECTS_PER_CTRL 1
288
289/* DDR3 Controller Settings */
290#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
291#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
292#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
293#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
294#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
295#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
296#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000297#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
298#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
299#define CONFIG_SYS_DDR_RCW_1 0x00000000
300#define CONFIG_SYS_DDR_RCW_2 0x00000000
Shengzhou Liue512c502013-09-13 14:46:03 +0800301#define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */
302#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000303#define CONFIG_SYS_DDR_TIMING_4 0x00000001
304#define CONFIG_SYS_DDR_TIMING_5 0x03402400
305
Shengzhou Liue512c502013-09-13 14:46:03 +0800306#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
307#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
308#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000309#define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF
310#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
Shengzhou Liue512c502013-09-13 14:46:03 +0800311#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
312#define CONFIG_SYS_DDR_MODE_2_800 0x00000000
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000313#define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100
Shengzhou Liue512c502013-09-13 14:46:03 +0800314#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000315
316/* settings for DDR3 at 667MT/s */
317#define CONFIG_SYS_DDR_TIMING_3_667 0x00010000
318#define CONFIG_SYS_DDR_TIMING_0_667 0x00110004
319#define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544
320#define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD
321#define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000
322#define CONFIG_SYS_DDR_MODE_1_667 0x00441210
323#define CONFIG_SYS_DDR_MODE_2_667 0x00000000
324#define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000
325#define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608
326
327#define CONFIG_SYS_CCSRBAR 0xffe00000
328#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
329
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500330/* Don't relocate CCSRBAR while in NAND_SPL */
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530331#ifdef CONFIG_SPL_BUILD
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500332#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
333#endif
334
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000335/*
336 * Memory map
337 *
338 * 0x0000_0000 0x3fff_ffff DDR 1G cacheable
339 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable
340 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
341 *
342 * Localbus non-cacheable
343 * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable
344 * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable
345 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
346 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
347 */
348
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000349/*
350 * IFC Definitions
351 */
352/* NOR Flash on IFC */
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530353#ifdef CONFIG_SPL_BUILD
354#define CONFIG_SYS_NO_FLASH
355#endif
356
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000357#define CONFIG_SYS_FLASH_BASE 0xee000000
358#define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
359
360#ifdef CONFIG_PHYS_64BIT
361#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
362#else
363#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
364#endif
365
366#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
367 CSPR_PORT_SIZE_16 | \
368 CSPR_MSEL_NOR | \
369 CSPR_V)
370#define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024)
371#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7)
372/* NOR Flash Timing Params */
373#define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \
374 FTIM0_NOR_TEADC(0x5) | \
375 FTIM0_NOR_TEAHC(0x5)
376#define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \
377 FTIM1_NOR_TRAD_NOR(0x0f)
378#define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \
379 FTIM2_NOR_TCH(0x4) | \
380 FTIM2_NOR_TWP(0x1c)
381#define CONFIG_SYS_NOR_FTIM3 0x0
382
383#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
384#define CONFIG_SYS_FLASH_QUIET_TEST
385#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
386#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
387
388#undef CONFIG_SYS_FLASH_CHECKSUM
389#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
390#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
391
392/* CFI for NOR Flash */
393#define CONFIG_FLASH_CFI_DRIVER
394#define CONFIG_SYS_FLASH_CFI
395#define CONFIG_SYS_FLASH_EMPTY_INFO
396#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
397
398/* NAND Flash on IFC */
399#define CONFIG_SYS_NAND_BASE 0xff800000
400#ifdef CONFIG_PHYS_64BIT
401#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
402#else
403#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
404#endif
405
Zhao Qiangac688072013-09-26 09:10:32 +0800406#define CONFIG_MTD_DEVICE
407#define CONFIG_MTD_PARTITION
408#define CONFIG_CMD_MTDPARTS
409#define MTDIDS_DEFAULT "nand0=ff800000.flash"
410#define MTDPARTS_DEFAULT \
411 "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
412
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000413#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
414 | CSPR_PORT_SIZE_8 \
415 | CSPR_MSEL_NAND \
416 | CSPR_V)
417#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
Shengzhou Liue512c502013-09-13 14:46:03 +0800418
419#if defined(CONFIG_P1010RDB_PA)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000420#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
421 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
422 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
423 | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \
424 | CSOR_NAND_PGS_512 /* Page Size = 512b */ \
425 | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \
426 | CSOR_NAND_PB(32)) /* 32 Pages Per Block */
Shengzhou Liue512c502013-09-13 14:46:03 +0800427#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
428
429#elif defined(CONFIG_P1010RDB_PB)
430#define CONFIG_SYS_NAND_ONFI_DETECTION
431#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
432 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
433 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
434 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
435 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
436 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
437 | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */
438#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
439#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000440
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500441#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
442#define CONFIG_SYS_MAX_NAND_DEVICE 1
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500443#define CONFIG_CMD_NAND
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500444
Shengzhou Liue512c502013-09-13 14:46:03 +0800445#if defined(CONFIG_P1010RDB_PA)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000446/* NAND Flash Timing Params */
447#define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \
448 FTIM0_NAND_TWP(0x0C) | \
449 FTIM0_NAND_TWCHT(0x04) | \
450 FTIM0_NAND_TWH(0x05)
451#define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \
452 FTIM1_NAND_TWBE(0x1d) | \
453 FTIM1_NAND_TRR(0x07) | \
454 FTIM1_NAND_TRP(0x0c)
455#define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \
456 FTIM2_NAND_TREH(0x05) | \
457 FTIM2_NAND_TWHRE(0x0f)
458#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)
459
Shengzhou Liue512c502013-09-13 14:46:03 +0800460#elif defined(CONFIG_P1010RDB_PB)
461/* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
462/* ONFI NAND Flash mode0 Timing Params */
463#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \
464 FTIM0_NAND_TWP(0x18) | \
465 FTIM0_NAND_TWCHT(0x07) | \
466 FTIM0_NAND_TWH(0x0a))
467#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \
468 FTIM1_NAND_TWBE(0x39) | \
469 FTIM1_NAND_TRR(0x0e) | \
470 FTIM1_NAND_TRP(0x18))
471#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
472 FTIM2_NAND_TREH(0x0a) | \
473 FTIM2_NAND_TWHRE(0x1e))
474#define CONFIG_SYS_NAND_FTIM3 0x0
475#endif
476
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000477#define CONFIG_SYS_NAND_DDR_LAW 11
478
479/* Set up IFC registers for boot location NOR/NAND */
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530480#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500481#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
482#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
483#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
484#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
485#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
486#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
487#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
488#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR
489#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
490#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
491#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
492#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
493#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
494#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
495#else
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000496#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
497#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
498#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
499#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
500#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
501#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
502#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
503#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
504#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
505#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
506#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
507#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
508#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
509#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500510#endif
511
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000512/* CPLD on IFC */
513#define CONFIG_SYS_CPLD_BASE 0xffb00000
514
515#ifdef CONFIG_PHYS_64BIT
516#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull
517#else
518#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
519#endif
520
521#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
522 | CSPR_PORT_SIZE_8 \
523 | CSPR_MSEL_GPCM \
524 | CSPR_V)
525#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
526#define CONFIG_SYS_CSOR3 0x0
527/* CPLD Timing parameters for IFC CS3 */
528#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
529 FTIM0_GPCM_TEADC(0x0e) | \
530 FTIM0_GPCM_TEAHC(0x0e))
531#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
532 FTIM1_GPCM_TRAD(0x1f))
533#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
Shaohui Xiede519162014-06-26 14:41:33 +0800534 FTIM2_GPCM_TCH(0x8) | \
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000535 FTIM2_GPCM_TWP(0x1f))
536#define CONFIG_SYS_CS3_FTIM3 0x0
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000537
Aneesh Bansal76c9aaf2014-03-07 19:12:09 +0530538#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
539 defined(CONFIG_RAMBOOT_NAND)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000540#define CONFIG_SYS_RAMBOOT
541#define CONFIG_SYS_EXTRA_ENV_RELOC
542#else
543#undef CONFIG_SYS_RAMBOOT
544#endif
545
Prabhakar Kushwaha74fa22e2013-04-16 13:27:44 +0530546#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
Aneesh Bansal50c76362014-01-20 14:57:03 +0530547#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
Prabhakar Kushwaha74fa22e2013-04-16 13:27:44 +0530548#define CONFIG_A003399_NOR_WORKAROUND
549#endif
550#endif
551
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000552#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
553#define CONFIG_BOARD_EARLY_INIT_R
554
555#define CONFIG_SYS_INIT_RAM_LOCK
556#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
York Sunb39d1212016-04-06 13:22:10 -0700557#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000558
York Sunb39d1212016-04-06 13:22:10 -0700559#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000560 - GENERATED_GBL_DATA_SIZE)
561#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
562
Prabhakar Kushwaha9307cba2014-03-31 15:31:48 +0530563#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000564#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/
565
Ying Zhangc9e1f582014-01-24 15:50:09 +0800566/*
567 * Config the L2 Cache as L2 SRAM
568 */
569#if defined(CONFIG_SPL_BUILD)
570#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
571#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
572#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
573#define CONFIG_SYS_L2_SIZE (256 << 10)
574#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
575#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000
576#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
577#define CONFIG_SPL_RELOC_STACK_SIZE (16 << 10)
578#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
579#define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10)
580#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
581#elif defined(CONFIG_NAND)
582#ifdef CONFIG_TPL_BUILD
583#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
584#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
585#define CONFIG_SYS_L2_SIZE (256 << 10)
586#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
587#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000
588#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
589#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
590#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10)
591#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
592#else
593#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
594#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
595#define CONFIG_SYS_L2_SIZE (256 << 10)
596#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
597#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000)
598#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
599#endif
600#endif
601#endif
602
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000603/* Serial Port */
604#define CONFIG_CONS_INDEX 1
605#undef CONFIG_SERIAL_SOFTWARE_FIFO
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000606#define CONFIG_SYS_NS16550_SERIAL
607#define CONFIG_SYS_NS16550_REG_SIZE 1
608#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
Ying Zhangc9e1f582014-01-24 15:50:09 +0800609#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500610#define CONFIG_NS16550_MIN_FUNCTIONS
611#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000612
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000613#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
614
615#define CONFIG_SYS_BAUDRATE_TABLE \
616 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
617
618#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
619#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
620
Heiko Schocher00f792e2012-10-24 13:48:22 +0200621/* I2C */
622#define CONFIG_SYS_I2C
623#define CONFIG_SYS_I2C_FSL
624#define CONFIG_SYS_FSL_I2C_SPEED 400000
625#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
626#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
627#define CONFIG_SYS_FSL_I2C2_SPEED 400000
628#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
629#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
Shengzhou Liuad89da02013-09-13 14:46:02 +0800630#define I2C_PCA9557_ADDR1 0x18
Shengzhou Liue512c502013-09-13 14:46:03 +0800631#define I2C_PCA9557_ADDR2 0x19
Shengzhou Liuad89da02013-09-13 14:46:02 +0800632#define I2C_PCA9557_BUS_NUM 0
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000633
634/* I2C EEPROM */
Shengzhou Liue512c502013-09-13 14:46:03 +0800635#if defined(CONFIG_P1010RDB_PB)
636#define CONFIG_ID_EEPROM
637#ifdef CONFIG_ID_EEPROM
638#define CONFIG_SYS_I2C_EEPROM_NXID
639#endif
640#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
641#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
642#define CONFIG_SYS_EEPROM_BUS_NUM 0
643#define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */
644#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000645/* enable read and write access to EEPROM */
646#define CONFIG_CMD_EEPROM
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000647#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
648#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
649#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
650
651/* RTC */
652#define CONFIG_RTC_PT7C4338
653#define CONFIG_SYS_I2C_RTC_ADDR 0x68
654
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000655/*
656 * SPI interface will not be available in case of NAND boot SPI CS0 will be
657 * used for SLIC
658 */
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530659#if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000660/* eSPI - Enhanced SPI */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000661#define CONFIG_SF_DEFAULT_SPEED 10000000
662#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500663#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000664
665#if defined(CONFIG_TSEC_ENET)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000666#define CONFIG_MII /* MII PHY management */
667#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
668#define CONFIG_TSEC1 1
669#define CONFIG_TSEC1_NAME "eTSEC1"
670#define CONFIG_TSEC2 1
671#define CONFIG_TSEC2_NAME "eTSEC2"
672#define CONFIG_TSEC3 1
673#define CONFIG_TSEC3_NAME "eTSEC3"
674
675#define TSEC1_PHY_ADDR 1
676#define TSEC2_PHY_ADDR 0
677#define TSEC3_PHY_ADDR 2
678
679#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
680#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
681#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
682
683#define TSEC1_PHYIDX 0
684#define TSEC2_PHYIDX 0
685#define TSEC3_PHYIDX 0
686
687#define CONFIG_ETHPRIME "eTSEC1"
688
689#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
690
691/* TBI PHY configuration for SGMII mode */
692#define CONFIG_TSEC_TBICR_SETTINGS ( \
693 TBICR_PHY_RESET \
694 | TBICR_ANEG_ENABLE \
695 | TBICR_FULL_DUPLEX \
696 | TBICR_SPEED1_SET \
697 )
698
699#endif /* CONFIG_TSEC_ENET */
700
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000701/* SATA */
702#define CONFIG_FSL_SATA
Zang Roy-R619119760b272012-11-26 00:05:38 +0000703#define CONFIG_FSL_SATA_V2
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000704#define CONFIG_LIBATA
705
706#ifdef CONFIG_FSL_SATA
707#define CONFIG_SYS_SATA_MAX_DEVICE 2
708#define CONFIG_SATA1
709#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
710#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
711#define CONFIG_SATA2
712#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
713#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
714
715#define CONFIG_CMD_SATA
716#define CONFIG_LBA48
717#endif /* #ifdef CONFIG_FSL_SATA */
718
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000719#define CONFIG_MMC
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000720#ifdef CONFIG_MMC
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000721#define CONFIG_DOS_PARTITION
722#define CONFIG_FSL_ESDHC
723#define CONFIG_GENERIC_MMC
724#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
725#endif
726
727#define CONFIG_HAS_FSL_DR_USB
728
729#if defined(CONFIG_HAS_FSL_DR_USB)
730#define CONFIG_USB_EHCI
731
732#ifdef CONFIG_USB_EHCI
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000733#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
734#define CONFIG_USB_EHCI_FSL
735#define CONFIG_USB_STORAGE
736#endif
737#endif
738
739/*
740 * Environment
741 */
Ying Zhangc9e1f582014-01-24 15:50:09 +0800742#if defined(CONFIG_SDCARD)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000743#define CONFIG_ENV_IS_IN_MMC
Fabio Estevam4394d0c2012-01-11 09:20:50 +0000744#define CONFIG_FSL_FIXED_MMC_LOCATION
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000745#define CONFIG_SYS_MMC_ENV_DEV 0
746#define CONFIG_ENV_SIZE 0x2000
Ying Zhangc9e1f582014-01-24 15:50:09 +0800747#elif defined(CONFIG_SPIFLASH)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000748#define CONFIG_ENV_IS_IN_SPI_FLASH
749#define CONFIG_ENV_SPI_BUS 0
750#define CONFIG_ENV_SPI_CS 0
751#define CONFIG_ENV_SPI_MAX_HZ 10000000
752#define CONFIG_ENV_SPI_MODE 0
753#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
754#define CONFIG_ENV_SECT_SIZE 0x10000
755#define CONFIG_ENV_SIZE 0x2000
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530756#elif defined(CONFIG_NAND)
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500757#define CONFIG_ENV_IS_IN_NAND
Ying Zhangc9e1f582014-01-24 15:50:09 +0800758#ifdef CONFIG_TPL_BUILD
759#define CONFIG_ENV_SIZE 0x2000
760#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
761#else
Shengzhou Liue512c502013-09-13 14:46:03 +0800762#if defined(CONFIG_P1010RDB_PA)
Dipen Dudhatd793e5a2011-07-28 14:47:28 -0500763#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
Shengzhou Liue512c502013-09-13 14:46:03 +0800764#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
765#elif defined(CONFIG_P1010RDB_PB)
766#define CONFIG_ENV_SIZE (16 * 1024)
767#define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */
768#endif
Ying Zhangc9e1f582014-01-24 15:50:09 +0800769#endif
770#define CONFIG_ENV_OFFSET (1024 * 1024)
Prabhakar Kushwaha0fa934d2013-04-16 13:28:12 +0530771#elif defined(CONFIG_SYS_RAMBOOT)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000772#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
773#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
774#define CONFIG_ENV_SIZE 0x2000
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000775#else
776#define CONFIG_ENV_IS_IN_FLASH
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000777#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000778#define CONFIG_ENV_SIZE 0x2000
779#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
780#endif
781
782#define CONFIG_LOADS_ECHO /* echo on for serial download */
783#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
784
785/*
786 * Command line configuration.
787 */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000788#define CONFIG_CMD_DATE
789#define CONFIG_CMD_ERRATA
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000790#define CONFIG_CMD_IRQ
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000791#define CONFIG_CMD_REGINFO
792
793#undef CONFIG_WATCHDOG /* watchdog disabled */
794
795#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
796 || defined(CONFIG_FSL_SATA)
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000797#define CONFIG_DOS_PARTITION
798#endif
799
Ruchika Gupta737537e2014-10-15 11:35:31 +0530800/* Hash command with SHA acceleration supported in hardware */
801#ifdef CONFIG_FSL_CAAM
802#define CONFIG_CMD_HASH
803#define CONFIG_SHA_HW_ACCEL
804#endif
805
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000806/*
807 * Miscellaneous configurable options
808 */
809#define CONFIG_SYS_LONGHELP /* undef to save memory */
810#define CONFIG_CMDLINE_EDITING /* Command-line editing */
811#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
812#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000813
814#if defined(CONFIG_CMD_KGDB)
815#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
816#else
817#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
818#endif
819#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
820 /* Print Buffer Size */
821#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
822#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000823
824/*
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000825 * For booting Linux, the board info and command line data
826 * have to be in the first 64 MB of memory, since this is
827 * the maximum mapped by the Linux kernel during initialization.
828 */
829#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
830#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
831
832#if defined(CONFIG_CMD_KGDB)
833#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000834#endif
835
836/*
837 * Environment Configuration
838 */
839
840#if defined(CONFIG_TSEC_ENET)
841#define CONFIG_HAS_ETH0
842#define CONFIG_HAS_ETH1
843#define CONFIG_HAS_ETH2
844#endif
845
Joe Hershberger8b3637c2011-10-13 13:03:47 +0000846#define CONFIG_ROOTPATH "/opt/nfsroot"
Joe Hershbergerb3f44c22011-10-13 13:03:48 +0000847#define CONFIG_BOOTFILE "uImage"
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000848#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
849
850/* default location for tftp and bootm */
851#define CONFIG_LOADADDR 1000000
852
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000853#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
854
855#define CONFIG_BAUDRATE 115200
856
857#define CONFIG_EXTRA_ENV_SETTINGS \
Marek Vasut5368c552012-09-23 17:41:24 +0200858 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000859 "netdev=eth0\0" \
Marek Vasut5368c552012-09-23 17:41:24 +0200860 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000861 "loadaddr=1000000\0" \
862 "consoledev=ttyS0\0" \
863 "ramdiskaddr=2000000\0" \
864 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
865 "fdtaddr=c00000\0" \
866 "fdtfile=p1010rdb.dtb\0" \
867 "bdev=sda1\0" \
868 "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \
869 "othbootargs=ramdisk_size=600000\0" \
870 "usbfatboot=setenv bootargs root=/dev/ram rw " \
871 "console=$consoledev,$baudrate $othbootargs; " \
872 "usb start;" \
873 "fatload usb 0:2 $loadaddr $bootfile;" \
874 "fatload usb 0:2 $fdtaddr $fdtfile;" \
875 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
876 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
877 "usbext2boot=setenv bootargs root=/dev/ram rw " \
878 "console=$consoledev,$baudrate $othbootargs; " \
879 "usb start;" \
880 "ext2load usb 0:4 $loadaddr $bootfile;" \
881 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
882 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
Shengzhou Liue512c502013-09-13 14:46:03 +0800883 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
884 CONFIG_BOOTMODE
885
886#if defined(CONFIG_P1010RDB_PA)
887#define CONFIG_BOOTMODE \
888 "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
889 "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
890 "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
891 "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
892 "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
893 "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
894
895#elif defined(CONFIG_P1010RDB_PB)
896#define CONFIG_BOOTMODE \
897 "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
898 "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
899 "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
900 "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
901 "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
902 "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
903 "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
904 "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
905 "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
906 "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
907#endif
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000908
909#define CONFIG_RAMBOOTCOMMAND \
910 "setenv bootargs root=/dev/ram rw " \
911 "console=$consoledev,$baudrate $othbootargs; " \
912 "tftp $ramdiskaddr $ramdiskfile;" \
913 "tftp $loadaddr $bootfile;" \
914 "tftp $fdtaddr $fdtfile;" \
915 "bootm $loadaddr $ramdiskaddr $fdtaddr"
916
917#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
918
Ruchika Gupta2f439e82011-06-08 22:52:48 -0500919#include <asm/fsl_secure_boot.h>
Ruchika Gupta2f439e82011-06-08 22:52:48 -0500920
Poonam Aggrwal49249e12011-02-09 19:17:53 +0000921#endif /* __CONFIG_H */