blob: cf63427e52f10ee5dd4cc77babf7f7ca2194b94c [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -03002/*
3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
4 *
5 * Author: Fabio Estevam <fabio.estevam@freescale.com>
6 *
7 * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>
8 *
9 * Based on SPL code from Solidrun tree, which is:
10 * Author: Tungyi Lin <tungyilin1127@gmail.com>
11 *
12 * Derived from EDM_CF_IMX6 code by TechNexion,Inc
13 * Ported to SolidRun microSOM by Rabeeh Khoury <rabeeh@solid-run.com>
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -030014 */
15
16#include <asm/arch/clock.h>
17#include <asm/arch/imx-regs.h>
18#include <asm/arch/iomux.h>
19#include <asm/arch/mx6-pins.h>
Fabio Estevamf68a9c62015-04-29 22:28:09 -030020#include <asm/arch/mxc_hdmi.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090021#include <linux/errno.h>
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -030022#include <asm/gpio.h>
Stefano Babic552a8482017-06-29 10:16:06 +020023#include <asm/mach-imx/iomux-v3.h>
24#include <asm/mach-imx/sata.h>
25#include <asm/mach-imx/video.h>
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -030026#include <mmc.h>
27#include <fsl_esdhc.h>
Fabio Estevam712be3e2015-05-04 11:22:55 -030028#include <malloc.h>
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -030029#include <miiphy.h>
30#include <netdev.h>
31#include <asm/arch/crm_regs.h>
32#include <asm/io.h>
33#include <asm/arch/sys_proto.h>
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -030034#include <spl.h>
Fabio Estevame1d74372015-04-29 22:28:10 -030035#include <usb.h>
Mateusz Kulikowskie162c6b2016-03-31 23:12:23 +020036#include <usb/ehci-ci.h>
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -030037
38DECLARE_GLOBAL_DATA_PTR;
39
40#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
41 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
42 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
43
44#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
45 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
46 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
47
48#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
49 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
50
51#define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \
52 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
53
54#define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
55 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
56
57#define ETH_PHY_RESET IMX_GPIO_NR(4, 15)
Fabio Estevame1d74372015-04-29 22:28:10 -030058#define USB_H1_VBUS IMX_GPIO_NR(1, 0)
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -030059
Jon Nettleton73708202018-06-07 16:17:36 +030060enum board_type {
61 CUBOXI = 0x00,
62 HUMMINGBOARD = 0x01,
63 HUMMINGBOARD2 = 0x02,
64 UNKNOWN = 0x03,
65};
66
Jon Nettleton51f957a2018-06-07 16:17:37 +030067#define MEM_STRIDE 0x4000000
68static u32 get_ram_size_stride_test(u32 *base, u32 maxsize)
69{
70 volatile u32 *addr;
71 u32 save[64];
72 u32 cnt;
73 u32 size;
74 int i = 0;
75
76 /* First save the data */
77 for (cnt = 0; cnt < maxsize; cnt += MEM_STRIDE) {
78 addr = (volatile u32 *)((u32)base + cnt); /* pointer arith! */
79 sync ();
80 save[i++] = *addr;
81 sync ();
82 }
83
84 /* First write a signature */
85 * (volatile u32 *)base = 0x12345678;
86 for (size = MEM_STRIDE; size < maxsize; size += MEM_STRIDE) {
87 * (volatile u32 *)((u32)base + size) = size;
88 sync ();
89 if (* (volatile u32 *)((u32)base) == size) { /* We reached the overlapping address */
90 break;
91 }
92 }
93
94 /* Restore the data */
95 for (cnt = (maxsize - MEM_STRIDE); i > 0; cnt -= MEM_STRIDE) {
96 addr = (volatile u32 *)((u32)base + cnt); /* pointer arith! */
97 sync ();
98 *addr = save[i--];
99 sync ();
100 }
101
102 return (size);
103}
104
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300105int dram_init(void)
106{
Jon Nettleton51f957a2018-06-07 16:17:37 +0300107 u32 max_size = imx_ddr_size();
108
109 gd->ram_size = get_ram_size_stride_test((u32 *) CONFIG_SYS_SDRAM_BASE,
110 (u32)max_size);
111
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300112 return 0;
113}
114
115static iomux_v3_cfg_t const uart1_pads[] = {
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300116 IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
117 IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300118};
119
120static iomux_v3_cfg_t const usdhc2_pads[] = {
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300121 IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
122 IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
123 IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
124 IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
125 IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
126 IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300127};
128
Jon Nettleton86e5a7f2018-06-11 15:26:20 +0300129static iomux_v3_cfg_t const usdhc3_pads[] = {
130 IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
131 IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
132 IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
133 IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
134 IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
135 IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
136 IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
137 IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
138 IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
139 IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
140 IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
141};
142
Jon Nettleton73708202018-06-07 16:17:36 +0300143static iomux_v3_cfg_t const board_detect[] = {
Fabio Estevamfeb6cc52015-04-25 18:47:19 -0300144 /* These pins are for sensing if it is a CuBox-i or a HummingBoard */
145 IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(UART_PAD_CTRL)),
146 IOMUX_PADS(PAD_EIM_DA4__GPIO3_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)),
Jon Nettleton73708202018-06-07 16:17:36 +0300147 IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(UART_PAD_CTRL)),
148};
149
150static iomux_v3_cfg_t const som_rev_detect[] = {
151 /* These pins are for sensing if it is a CuBox-i or a HummingBoard */
152 IOMUX_PADS(PAD_CSI0_DAT14__GPIO6_IO00 | MUX_PAD_CTRL(UART_PAD_CTRL)),
153 IOMUX_PADS(PAD_CSI0_DAT18__GPIO6_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)),
Fabio Estevamfeb6cc52015-04-25 18:47:19 -0300154};
155
Fabio Estevame1d74372015-04-29 22:28:10 -0300156static iomux_v3_cfg_t const usb_pads[] = {
157 IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
158};
159
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300160static void setup_iomux_uart(void)
161{
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300162 SETUP_IOMUX_PADS(uart1_pads);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300163}
164
Jon Nettleton86e5a7f2018-06-11 15:26:20 +0300165static struct fsl_esdhc_cfg usdhc_cfg = {
166 .esdhc_base = USDHC2_BASE_ADDR,
167 .max_bus_width = 4,
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300168};
169
Jon Nettleton86e5a7f2018-06-11 15:26:20 +0300170static struct fsl_esdhc_cfg emmc_cfg = {
171 .esdhc_base = USDHC3_BASE_ADDR,
172 .max_bus_width = 8,
173};
174
175int board_mmc_get_env_dev(int devno)
176{
177 return devno - 1;
178}
179
180#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
181
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300182int board_mmc_getcd(struct mmc *mmc)
183{
Jon Nettleton86e5a7f2018-06-11 15:26:20 +0300184 struct fsl_esdhc_cfg *cfg = mmc->priv;
185 int ret = 0;
186
187 switch (cfg->esdhc_base) {
188 case USDHC2_BASE_ADDR:
189 ret = !gpio_get_value(USDHC2_CD_GPIO);
190 break;
191 case USDHC3_BASE_ADDR:
Jon Nettleton19ed6062018-06-11 15:26:22 +0300192 ret = (mmc_get_op_cond(mmc) < 0) ? 0 : 1; /* eMMC/uSDHC3 has no CD GPIO */
Jon Nettleton86e5a7f2018-06-11 15:26:20 +0300193 break;
194 }
195
196 return ret;
197}
198
199static int mmc_init_main(bd_t *bis)
200{
201 int ret;
202
203 /*
204 * Following map is done:
205 * (U-Boot device node) (Physical Port)
206 * mmc0 Carrier board MicroSD
207 * mmc1 SOM eMMC
208 */
209 SETUP_IOMUX_PADS(usdhc2_pads);
210 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
211 ret = fsl_esdhc_initialize(bis, &usdhc_cfg);
212 if (ret)
213 return ret;
214
215 SETUP_IOMUX_PADS(usdhc3_pads);
216 emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
217 return fsl_esdhc_initialize(bis, &emmc_cfg);
218}
219
220static int mmc_init_spl(bd_t *bis)
221{
222 struct src *psrc = (struct src *)SRC_BASE_ADDR;
223 unsigned reg = readl(&psrc->sbmr1) >> 11;
224
225 /*
226 * Upon reading BOOT_CFG register the following map is done:
227 * Bit 11 and 12 of BOOT_CFG register can determine the current
228 * mmc port
229 * 0x1 SD2
230 * 0x2 SD3
231 */
232 switch (reg & 0x3) {
233 case 0x1:
234 SETUP_IOMUX_PADS(usdhc2_pads);
235 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
236 gd->arch.sdhc_clk = usdhc_cfg.sdhc_clk;
237 return fsl_esdhc_initialize(bis, &usdhc_cfg);
238 case 0x2:
239 SETUP_IOMUX_PADS(usdhc3_pads);
240 emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
241 gd->arch.sdhc_clk = emmc_cfg.sdhc_clk;
242 return fsl_esdhc_initialize(bis, &emmc_cfg);
243 }
244
245 return -ENODEV;
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300246}
247
248int board_mmc_init(bd_t *bis)
249{
Jon Nettleton86e5a7f2018-06-11 15:26:20 +0300250 if (IS_ENABLED(CONFIG_SPL_BUILD))
251 return mmc_init_spl(bis);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300252
Jon Nettleton86e5a7f2018-06-11 15:26:20 +0300253 return mmc_init_main(bis);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300254}
255
256static iomux_v3_cfg_t const enet_pads[] = {
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300257 IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
258 IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300259 /* AR8035 reset */
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300260 IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300261 /* AR8035 interrupt */
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300262 IOMUX_PADS(PAD_DI0_PIN2__GPIO4_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300263 /* GPIO16 -> AR8035 25MHz */
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300264 IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)),
265 IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)),
266 IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
267 IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
268 IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
269 IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
270 IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300271 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300272 IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK)),
273 IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
274 IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
275 IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
276 IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
277 IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
278 IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
Fabio Estevama4d45032015-05-04 11:22:56 -0300279 IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
280 IOMUX_PADS(PAD_ENET_RXD1__GPIO1_IO26 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300281};
282
283static void setup_iomux_enet(void)
284{
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300285 SETUP_IOMUX_PADS(enet_pads);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300286
287 gpio_direction_output(ETH_PHY_RESET, 0);
Fabio Estevam4b421d42016-01-04 21:38:08 -0200288 mdelay(10);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300289 gpio_set_value(ETH_PHY_RESET, 1);
Fabio Estevam4b421d42016-01-04 21:38:08 -0200290 udelay(100);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300291}
292
293int board_phy_config(struct phy_device *phydev)
294{
295 if (phydev->drv->config)
296 phydev->drv->config(phydev);
297
298 return 0;
299}
300
Fabio Estevam712be3e2015-05-04 11:22:55 -0300301/* On Cuboxi Ethernet PHY can be located at addresses 0x0 or 0x4 */
302#define ETH_PHY_MASK ((1 << 0x0) | (1 << 0x4))
303
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300304int board_eth_init(bd_t *bis)
305{
306 struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
Fabio Estevam712be3e2015-05-04 11:22:55 -0300307 struct mii_dev *bus;
308 struct phy_device *phydev;
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300309
Peng Fan6d97dc12015-08-12 17:46:50 +0800310 int ret = enable_fec_anatop_clock(0, ENET_25MHZ);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300311 if (ret)
312 return ret;
313
314 /* set gpr1[ENET_CLK_SEL] */
315 setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
316
317 setup_iomux_enet();
318
Fabio Estevam712be3e2015-05-04 11:22:55 -0300319 bus = fec_get_miibus(IMX_FEC_BASE, -1);
320 if (!bus)
321 return -EINVAL;
322
323 phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII);
324 if (!phydev) {
325 ret = -EINVAL;
326 goto free_bus;
327 }
328
329 debug("using phy at address %d\n", phydev->addr);
330 ret = fec_probe(bis, -1, IMX_FEC_BASE, bus, phydev);
331 if (ret)
332 goto free_phydev;
333
334 return 0;
335
336free_phydev:
337 free(phydev);
338free_bus:
339 free(bus);
340 return ret;
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300341}
342
Fabio Estevamf68a9c62015-04-29 22:28:09 -0300343#ifdef CONFIG_VIDEO_IPUV3
344static void do_enable_hdmi(struct display_info_t const *dev)
345{
346 imx_enable_hdmi_phy();
347}
348
349struct display_info_t const displays[] = {
350 {
351 .bus = -1,
352 .addr = 0,
353 .pixfmt = IPU_PIX_FMT_RGB24,
354 .detect = detect_hdmi,
355 .enable = do_enable_hdmi,
356 .mode = {
357 .name = "HDMI",
358 /* 1024x768@60Hz (VESA)*/
359 .refresh = 60,
360 .xres = 1024,
361 .yres = 768,
362 .pixclock = 15384,
363 .left_margin = 160,
364 .right_margin = 24,
365 .upper_margin = 29,
366 .lower_margin = 3,
367 .hsync_len = 136,
368 .vsync_len = 6,
369 .sync = FB_SYNC_EXT,
370 .vmode = FB_VMODE_NONINTERLACED
371 }
372 }
373};
374
375size_t display_count = ARRAY_SIZE(displays);
376
377static int setup_display(void)
378{
379 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
380 int reg;
381 int timeout = 100000;
382
383 enable_ipu_clock();
384 imx_setup_hdmi();
385
386 /* set video pll to 455MHz (24MHz * (37+11/12) / 2) */
387 setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
388
389 reg = readl(&ccm->analog_pll_video);
390 reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
391 reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(37);
392 reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
393 reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1);
394 writel(reg, &ccm->analog_pll_video);
395
396 writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
397 writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
398
399 reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
400 writel(reg, &ccm->analog_pll_video);
401
402 while (timeout--)
403 if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
404 break;
405 if (timeout < 0) {
406 printf("Warning: video pll lock timeout!\n");
407 return -ETIMEDOUT;
408 }
409
410 reg = readl(&ccm->analog_pll_video);
411 reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
412 reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
413 writel(reg, &ccm->analog_pll_video);
414
415 /* gate ipu1_di0_clk */
416 clrbits_le32(&ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
417
418 /* select video_pll clock / 7 for ipu1_di0_clk -> 65MHz pixclock */
419 reg = readl(&ccm->chsccdr);
420 reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK |
421 MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK |
422 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
423 reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET) |
424 (6 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) |
425 (0 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
426 writel(reg, &ccm->chsccdr);
427
428 /* enable ipu1_di0_clk */
429 setbits_le32(&ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
430
431 return 0;
432}
433#endif /* CONFIG_VIDEO_IPUV3 */
434
Fabio Estevame1d74372015-04-29 22:28:10 -0300435#ifdef CONFIG_USB_EHCI_MX6
436static void setup_usb(void)
437{
438 SETUP_IOMUX_PADS(usb_pads);
439}
440
441int board_ehci_hcd_init(int port)
442{
443 if (port == 1)
444 gpio_direction_output(USB_H1_VBUS, 1);
445
446 return 0;
447}
448#endif
449
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300450int board_early_init_f(void)
451{
452 setup_iomux_uart();
Fabio Estevamf68a9c62015-04-29 22:28:09 -0300453
Peter Robinsonff181562017-07-01 18:44:03 +0100454#ifdef CONFIG_CMD_SATA
455 setup_sata();
456#endif
457
Fabio Estevame1d74372015-04-29 22:28:10 -0300458#ifdef CONFIG_USB_EHCI_MX6
459 setup_usb();
460#endif
Fabio Estevamae40e822017-09-22 23:45:31 -0300461 return 0;
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300462}
463
464int board_init(void)
465{
Fabio Estevamae40e822017-09-22 23:45:31 -0300466 int ret = 0;
467
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300468 /* address of boot parameters */
469 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
470
Fabio Estevamae40e822017-09-22 23:45:31 -0300471#ifdef CONFIG_VIDEO_IPUV3
472 ret = setup_display();
473#endif
474
475 return ret;
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300476}
477
Jon Nettleton73708202018-06-07 16:17:36 +0300478static enum board_type board_type(void)
Fabio Estevamfeb6cc52015-04-25 18:47:19 -0300479{
Jon Nettleton73708202018-06-07 16:17:36 +0300480 int val1, val2, val3;
Fabio Estevamfeb6cc52015-04-25 18:47:19 -0300481
Jon Nettleton73708202018-06-07 16:17:36 +0300482 SETUP_IOMUX_PADS(board_detect);
Fabio Estevamfeb6cc52015-04-25 18:47:19 -0300483
484 /*
485 * Machine selection -
Jon Nettleton73708202018-06-07 16:17:36 +0300486 * Machine val1, val2, val3
487 * ----------------------------
488 * HB2 x x 0
489 * HB rev 3.x x 0 x
490 * CBi 0 1 x
491 * HB 1 1 x
Fabio Estevamfeb6cc52015-04-25 18:47:19 -0300492 */
493
Dennis Gilmoreb1e85122017-08-24 10:49:43 -0500494 gpio_direction_input(IMX_GPIO_NR(2, 8));
Jon Nettleton73708202018-06-07 16:17:36 +0300495 val3 = gpio_get_value(IMX_GPIO_NR(2, 8));
Dennis Gilmoreb1e85122017-08-24 10:49:43 -0500496
Jon Nettleton73708202018-06-07 16:17:36 +0300497 if (val3 == 0)
498 return HUMMINGBOARD2;
Dennis Gilmoreb1e85122017-08-24 10:49:43 -0500499
Jon Nettleton73708202018-06-07 16:17:36 +0300500 gpio_direction_input(IMX_GPIO_NR(3, 4));
501 val2 = gpio_get_value(IMX_GPIO_NR(3, 4));
Dennis Gilmoreb1e85122017-08-24 10:49:43 -0500502
Jon Nettleton73708202018-06-07 16:17:36 +0300503 if (val2 == 0)
504 return HUMMINGBOARD;
505
506 gpio_direction_input(IMX_GPIO_NR(4, 9));
507 val1 = gpio_get_value(IMX_GPIO_NR(4, 9));
508
509 if (val1 == 0) {
510 return CUBOXI;
511 } else {
512 return HUMMINGBOARD;
513 }
514}
515
516static bool is_rev_15_som(void)
517{
518 int val1, val2;
519 SETUP_IOMUX_PADS(som_rev_detect);
520
521 val1 = gpio_get_value(IMX_GPIO_NR(6, 0));
522 val2 = gpio_get_value(IMX_GPIO_NR(6, 4));
523
524 if (val1 == 1 && val2 == 0)
Dennis Gilmoreb1e85122017-08-24 10:49:43 -0500525 return true;
Jon Nettleton73708202018-06-07 16:17:36 +0300526
527 return false;
Dennis Gilmoreb1e85122017-08-24 10:49:43 -0500528}
529
Jon Nettleton19ed6062018-06-11 15:26:22 +0300530static bool has_emmc(void)
531{
532 struct mmc *mmc;
533 mmc = find_mmc_device(1);
534 if (!mmc)
535 return 0;
536 return (mmc_get_op_cond(mmc) < 0) ? 0 : 1;
537}
538
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300539int checkboard(void)
540{
Jon Nettleton73708202018-06-07 16:17:36 +0300541 switch (board_type()) {
542 case CUBOXI:
543 puts("Board: MX6 Cubox-i");
544 break;
545 case HUMMINGBOARD:
546 puts("Board: MX6 HummingBoard");
547 break;
548 case HUMMINGBOARD2:
549 puts("Board: MX6 HummingBoard2");
550 break;
551 case UNKNOWN:
552 default:
553 puts("Board: Unknown\n");
554 goto out;
555 }
Fabio Estevamfeb6cc52015-04-25 18:47:19 -0300556
Jon Nettleton73708202018-06-07 16:17:36 +0300557 if (is_rev_15_som())
558 puts(" (som rev 1.5)\n");
559 else
560 puts("\n");
561
562out:
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300563 return 0;
564}
565
Fabio Estevam205d5862015-04-25 18:47:21 -0300566int board_late_init(void)
567{
568#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
Jon Nettleton73708202018-06-07 16:17:36 +0300569 switch (board_type()) {
570 case CUBOXI:
Simon Glass382bee52017-08-03 12:22:09 -0600571 env_set("board_name", "CUBOXI");
Jon Nettleton73708202018-06-07 16:17:36 +0300572 break;
573 case HUMMINGBOARD:
574 env_set("board_name", "HUMMINGBOARD");
575 break;
576 case HUMMINGBOARD2:
577 env_set("board_name", "HUMMINGBOARD2");
578 break;
579 case UNKNOWN:
580 default:
581 env_set("board_name", "CUBOXI");
582 }
Fabio Estevam205d5862015-04-25 18:47:21 -0300583
Breno Lima4a2f9012016-07-22 09:11:30 -0300584 if (is_mx6dq())
Simon Glass382bee52017-08-03 12:22:09 -0600585 env_set("board_rev", "MX6Q");
Fabio Estevam205d5862015-04-25 18:47:21 -0300586 else
Simon Glass382bee52017-08-03 12:22:09 -0600587 env_set("board_rev", "MX6DL");
Jon Nettleton73708202018-06-07 16:17:36 +0300588
589 if (is_rev_15_som())
590 env_set("som_rev", "V15");
Jon Nettleton19ed6062018-06-11 15:26:22 +0300591
592 if (has_emmc())
593 env_set("has_emmc", "yes");
594
Fabio Estevam205d5862015-04-25 18:47:21 -0300595#endif
596
597 return 0;
598}
599
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300600#ifdef CONFIG_SPL_BUILD
Fabio Estevamcfdcc5f2015-04-25 18:47:17 -0300601#include <asm/arch/mx6-ddr.h>
Fabio Estevam8cb68172015-04-25 18:47:18 -0300602static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = {
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300603 .dram_sdclk_0 = 0x00020030,
604 .dram_sdclk_1 = 0x00020030,
605 .dram_cas = 0x00020030,
606 .dram_ras = 0x00020030,
Jon Nettletonb4e9bdc2018-04-10 17:05:35 -0300607 .dram_reset = 0x000c0030,
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300608 .dram_sdcke0 = 0x00003000,
609 .dram_sdcke1 = 0x00003000,
610 .dram_sdba2 = 0x00000000,
611 .dram_sdodt0 = 0x00003030,
612 .dram_sdodt1 = 0x00003030,
613 .dram_sdqs0 = 0x00000030,
614 .dram_sdqs1 = 0x00000030,
615 .dram_sdqs2 = 0x00000030,
616 .dram_sdqs3 = 0x00000030,
617 .dram_sdqs4 = 0x00000030,
618 .dram_sdqs5 = 0x00000030,
619 .dram_sdqs6 = 0x00000030,
620 .dram_sdqs7 = 0x00000030,
621 .dram_dqm0 = 0x00020030,
622 .dram_dqm1 = 0x00020030,
623 .dram_dqm2 = 0x00020030,
624 .dram_dqm3 = 0x00020030,
625 .dram_dqm4 = 0x00020030,
626 .dram_dqm5 = 0x00020030,
627 .dram_dqm6 = 0x00020030,
628 .dram_dqm7 = 0x00020030,
629};
630
Fabio Estevam8cb68172015-04-25 18:47:18 -0300631static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = {
632 .dram_sdclk_0 = 0x00000028,
633 .dram_sdclk_1 = 0x00000028,
634 .dram_cas = 0x00000028,
635 .dram_ras = 0x00000028,
636 .dram_reset = 0x000c0028,
637 .dram_sdcke0 = 0x00003000,
638 .dram_sdcke1 = 0x00003000,
639 .dram_sdba2 = 0x00000000,
640 .dram_sdodt0 = 0x00003030,
641 .dram_sdodt1 = 0x00003030,
642 .dram_sdqs0 = 0x00000028,
643 .dram_sdqs1 = 0x00000028,
644 .dram_sdqs2 = 0x00000028,
645 .dram_sdqs3 = 0x00000028,
646 .dram_sdqs4 = 0x00000028,
647 .dram_sdqs5 = 0x00000028,
648 .dram_sdqs6 = 0x00000028,
649 .dram_sdqs7 = 0x00000028,
650 .dram_dqm0 = 0x00000028,
651 .dram_dqm1 = 0x00000028,
652 .dram_dqm2 = 0x00000028,
653 .dram_dqm3 = 0x00000028,
654 .dram_dqm4 = 0x00000028,
655 .dram_dqm5 = 0x00000028,
656 .dram_dqm6 = 0x00000028,
657 .dram_dqm7 = 0x00000028,
658};
659
660static const struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = {
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300661 .grp_ddr_type = 0x000C0000,
662 .grp_ddrmode_ctl = 0x00020000,
663 .grp_ddrpke = 0x00000000,
664 .grp_addds = 0x00000030,
665 .grp_ctlds = 0x00000030,
666 .grp_ddrmode = 0x00020000,
667 .grp_b0ds = 0x00000030,
668 .grp_b1ds = 0x00000030,
669 .grp_b2ds = 0x00000030,
670 .grp_b3ds = 0x00000030,
671 .grp_b4ds = 0x00000030,
672 .grp_b5ds = 0x00000030,
673 .grp_b6ds = 0x00000030,
674 .grp_b7ds = 0x00000030,
675};
676
Fabio Estevam8cb68172015-04-25 18:47:18 -0300677static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
678 .grp_ddr_type = 0x000c0000,
679 .grp_ddrmode_ctl = 0x00020000,
680 .grp_ddrpke = 0x00000000,
681 .grp_addds = 0x00000028,
682 .grp_ctlds = 0x00000028,
683 .grp_ddrmode = 0x00020000,
684 .grp_b0ds = 0x00000028,
685 .grp_b1ds = 0x00000028,
686 .grp_b2ds = 0x00000028,
687 .grp_b3ds = 0x00000028,
688 .grp_b4ds = 0x00000028,
689 .grp_b5ds = 0x00000028,
690 .grp_b6ds = 0x00000028,
691 .grp_b7ds = 0x00000028,
692};
693
694/* microSOM with Dual processor and 1GB memory */
695static const struct mx6_mmdc_calibration mx6q_1g_mmcd_calib = {
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300696 .p0_mpwldectrl0 = 0x00000000,
697 .p0_mpwldectrl1 = 0x00000000,
698 .p1_mpwldectrl0 = 0x00000000,
699 .p1_mpwldectrl1 = 0x00000000,
700 .p0_mpdgctrl0 = 0x0314031c,
701 .p0_mpdgctrl1 = 0x023e0304,
702 .p1_mpdgctrl0 = 0x03240330,
703 .p1_mpdgctrl1 = 0x03180260,
704 .p0_mprddlctl = 0x3630323c,
705 .p1_mprddlctl = 0x3436283a,
706 .p0_mpwrdlctl = 0x36344038,
707 .p1_mpwrdlctl = 0x422a423c,
708};
709
Fabio Estevam8cb68172015-04-25 18:47:18 -0300710/* microSOM with Quad processor and 2GB memory */
711static const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = {
712 .p0_mpwldectrl0 = 0x00000000,
713 .p0_mpwldectrl1 = 0x00000000,
714 .p1_mpwldectrl0 = 0x00000000,
715 .p1_mpwldectrl1 = 0x00000000,
716 .p0_mpdgctrl0 = 0x0314031c,
717 .p0_mpdgctrl1 = 0x023e0304,
718 .p1_mpdgctrl0 = 0x03240330,
719 .p1_mpdgctrl1 = 0x03180260,
720 .p0_mprddlctl = 0x3630323c,
721 .p1_mprddlctl = 0x3436283a,
722 .p0_mpwrdlctl = 0x36344038,
723 .p1_mpwrdlctl = 0x422a423c,
724};
725
726/* microSOM with Solo processor and 512MB memory */
727static const struct mx6_mmdc_calibration mx6dl_512m_mmcd_calib = {
728 .p0_mpwldectrl0 = 0x0045004D,
729 .p0_mpwldectrl1 = 0x003A0047,
730 .p0_mpdgctrl0 = 0x023C0224,
731 .p0_mpdgctrl1 = 0x02000220,
732 .p0_mprddlctl = 0x44444846,
733 .p0_mpwrdlctl = 0x32343032,
734};
735
736/* microSOM with Dual lite processor and 1GB memory */
737static const struct mx6_mmdc_calibration mx6dl_1g_mmcd_calib = {
738 .p0_mpwldectrl0 = 0x0045004D,
739 .p0_mpwldectrl1 = 0x003A0047,
740 .p1_mpwldectrl0 = 0x001F001F,
741 .p1_mpwldectrl1 = 0x00210035,
742 .p0_mpdgctrl0 = 0x023C0224,
743 .p0_mpdgctrl1 = 0x02000220,
744 .p1_mpdgctrl0 = 0x02200220,
Fabio Estevamdbab8b82015-05-29 13:00:36 -0300745 .p1_mpdgctrl1 = 0x02040208,
Fabio Estevam8cb68172015-04-25 18:47:18 -0300746 .p0_mprddlctl = 0x44444846,
747 .p1_mprddlctl = 0x4042463C,
748 .p0_mpwrdlctl = 0x32343032,
749 .p1_mpwrdlctl = 0x36363430,
750};
751
752static struct mx6_ddr3_cfg mem_ddr_2g = {
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300753 .mem_speed = 1600,
754 .density = 2,
755 .width = 16,
756 .banks = 8,
757 .rowaddr = 14,
758 .coladdr = 10,
759 .pagesz = 2,
760 .trcd = 1375,
761 .trcmin = 4875,
762 .trasmin = 3500,
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300763};
764
Fabio Estevam8cb68172015-04-25 18:47:18 -0300765static struct mx6_ddr3_cfg mem_ddr_4g = {
766 .mem_speed = 1600,
767 .density = 4,
768 .width = 16,
769 .banks = 8,
Jon Nettleton51f957a2018-06-07 16:17:37 +0300770 .rowaddr = 16,
Fabio Estevam8cb68172015-04-25 18:47:18 -0300771 .coladdr = 10,
772 .pagesz = 2,
773 .trcd = 1375,
774 .trcmin = 4875,
775 .trasmin = 3500,
776};
777
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300778static void ccgr_init(void)
779{
780 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
781
782 writel(0x00C03F3F, &ccm->CCGR0);
783 writel(0x0030FC03, &ccm->CCGR1);
784 writel(0x0FFFC000, &ccm->CCGR2);
785 writel(0x3FF00000, &ccm->CCGR3);
786 writel(0x00FFF300, &ccm->CCGR4);
787 writel(0x0F0000C3, &ccm->CCGR5);
788 writel(0x000003FF, &ccm->CCGR6);
789}
790
Fabio Estevam8cb68172015-04-25 18:47:18 -0300791static void spl_dram_init(int width)
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300792{
793 struct mx6_ddr_sysinfo sysinfo = {
794 /* width of data bus: 0=16, 1=32, 2=64 */
Fabio Estevam8cb68172015-04-25 18:47:18 -0300795 .dsize = width / 32,
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300796 /* config for full 4GB range so that get_mem_size() works */
797 .cs_density = 32, /* 32Gb per CS */
798 .ncs = 1, /* single chip select */
799 .cs1_mirror = 0,
800 .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
801 .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */
802 .walat = 1, /* Write additional latency */
803 .ralat = 5, /* Read additional latency */
804 .mif3_mode = 3, /* Command prediction working mode */
805 .bi_on = 1, /* Bank interleaving enabled */
806 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
807 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
Peng Fanf2ff8342015-08-17 16:11:03 +0800808 .ddr_type = DDR_TYPE_DDR3,
Fabio Estevamedf00932016-08-29 20:37:15 -0300809 .refsel = 1, /* Refresh cycles at 32KHz */
810 .refr = 7, /* 8 refresh commands per refresh cycle */
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300811 };
812
Breno Lima4a2f9012016-07-22 09:11:30 -0300813 if (is_mx6dq())
Fabio Estevam8cb68172015-04-25 18:47:18 -0300814 mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
815 else
816 mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
817
818 if (is_cpu_type(MXC_CPU_MX6D))
819 mx6_dram_cfg(&sysinfo, &mx6q_1g_mmcd_calib, &mem_ddr_2g);
820 else if (is_cpu_type(MXC_CPU_MX6Q))
821 mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g);
822 else if (is_cpu_type(MXC_CPU_MX6DL))
Fabio Estevamdbab8b82015-05-29 13:00:36 -0300823 mx6_dram_cfg(&sysinfo, &mx6dl_1g_mmcd_calib, &mem_ddr_2g);
Fabio Estevam8cb68172015-04-25 18:47:18 -0300824 else if (is_cpu_type(MXC_CPU_MX6SOLO))
825 mx6_dram_cfg(&sysinfo, &mx6dl_512m_mmcd_calib, &mem_ddr_2g);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300826}
827
828void board_init_f(ulong dummy)
829{
830 /* setup AIPS and disable watchdog */
831 arch_cpu_init();
832
833 ccgr_init();
834 gpr_init();
835
836 /* iomux and setup of i2c */
837 board_early_init_f();
838
839 /* setup GP timer */
840 timer_init();
841
842 /* UART clocks enabled and gd valid - init serial console */
843 preloader_console_init();
844
845 /* DDR initialization */
Fabio Estevam8cb68172015-04-25 18:47:18 -0300846 if (is_cpu_type(MXC_CPU_MX6SOLO))
847 spl_dram_init(32);
848 else
849 spl_dram_init(64);
Fabio Estevamb8ce6fe2015-04-20 14:48:57 -0300850
851 /* Clear the BSS. */
852 memset(__bss_start, 0, __bss_end - __bss_start);
853
854 /* load/boot image from boot device */
855 board_init_r(NULL, 0);
856}
857#endif