blob: 2cdff8698464eb87a5cb8d70e87b6236ba685df1 [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
wdenka1191902005-01-09 17:12:27 +00002Changes for U-Boot 1.1.3:
3======================================================================
4
wdenk5e5f9ed2005-04-13 23:15:10 +00005* Add support for canmb board
6
stroese4c2a3662005-04-13 10:08:39 +00007* Patch by Stefan Roese, 13 Apr 2005:
8 Update for esd apc405
9
wdenk2a8af182005-04-13 10:02:42 +000010* Fixes for TQM8560 board:
11 - fix clock rates
12 - remove debug messages
13 - fix flash sector protection
14
wdenkb77fad32005-04-07 22:36:40 +000015* Patch by Steven Scholz, 07 Apr 2005:
16 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
17
wdenk2a8af182005-04-13 10:02:42 +000018* Patches by Steven Scholz, 07 Apr 2005:
wdenkb77fad32005-04-07 22:36:40 +000019 Fix compiler warning in altera.c
wdenk2a8af182005-04-13 10:02:42 +000020 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenkb77fad32005-04-07 22:36:40 +000021
22* Patch by Ladislav Michl, 06 Apr 2005:
23 Fix voiceblue configuration.
24
stroese7ec25502005-04-07 05:35:12 +000025* Patch by Stefan Roese, 06 Apr 2005:
26 Updates for OCOTEA board:
27 - Changed U-Boot size from 512kByte to 256kByte
28 - Fixed flash driver to support boot from soldered user flash
29 - Added README for switch from PIBS firmware to U-Boot
30
31* Patch by Travis Sawyer, 05 Apr 2005:
32 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
33 Problem found by Andrew Wozniak.
34
wdenka85f9f22005-04-06 13:52:31 +000035* Patch by Steven Scholz, 06 Apr 2005:
36 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
37 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
38
wdenk20787e22005-04-06 00:04:16 +000039* Patches by Robert Whaley, 29 Nov 2004:
40 - update the pxa-regs.h file for PXA27x chips
41 - add PXA27x based ADSVIX board
42 - add support for MMC on PXA27x processors
43
44* Patch by Andrew E. Mileski, 28 Nov 2004:
45 Fix PPC4xx SPD SDRAM detection bug
46
47* Patch by Hiroshi Ito, 26 Nov 2004:
48 Fix logic of "test -z" and "test -n" commands
49
wdenk3c2b3d42005-04-05 23:32:21 +000050* Patch by Ladislav Michl, 05 Apr 2005:
51 Add support for VoiceBlue board.
52
53* Patch by Ladislav Michl, 05 Apr 2005:
54 Fix netboot_common() prototypes.
55
wdenkb304c962005-04-05 22:30:50 +000056* Patch by Steven Scholz, 05 Apr 2005:
57 Use i.MX watchdog timer for reset_cpu()
58
59* Patch by Steven Scholz, 05 Apr 2005:
60 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
61 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
62 (now in interupts.c)
63
wdenk12b43d52005-04-05 21:57:18 +000064* Add support for MPC8220 based "sorcery" board.
65
66* Add support for TQM8560 board.
wdenkf5c5ef42005-04-05 16:26:47 +000067
wdenk3dd7f0f2005-04-04 23:43:44 +000068* Add FEC support for TQM8540 board.
69 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
70
71* Patch by Martin Krause, 04 Apr 2005:
72 Update default configuration for CMC_PU2 board.
73
wdenkba83a302005-04-04 12:23:03 +000074* Patch by Steven Scholz, 04 Apr 2005:
wdenk8aa1a2d2005-04-04 12:44:11 +000075 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
76 - introduce two new configuration options instead:
77 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
78
79* Patch by Steven Scholz, 04 Apr 2005:
wdenkba83a302005-04-04 12:23:03 +000080 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
81
wdenk101e8df2005-04-04 12:08:28 +000082* Fix timer code for ARM systems: make sure that udelay() does not
83 reset timers so it's save to use udelay() in timeout code.
84
wdenk50712ba2005-04-03 23:35:57 +000085* Patch by Mathias Küster, 23 Nov 2004:
86 add udelay support for the mcf5282 cpu
87
88* Patch by Tolunay Orkun, 16 November 2004:
89 fix incorrect onboard Xilinx CPLD base address
wdenk3c2b3d42005-04-05 23:32:21 +000090
wdenk901787d2005-04-03 23:22:21 +000091* Patch by Jerry Van Baren, 08 Nov 2004:
92 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
93 the jumper for the HRCW source should select flash. If lowboot is
94 not selected, the jumper for the HRCW source should select the
95 BCSR.
96 - change default load base address to 0x00400000
97
wdenk8b0bfc62005-04-03 23:11:38 +000098* Patch by Yuli Barcohen, 08 Nov 2004:
99 Add support for Analogue & Micro Rattler boards.
100 Tested on Rattler8248.
101
102* Patch by Andre Renaud, 08 Nov 2004:
103 Fix watchdog support in common/lcd.c
104
105* Patch by Marc Leeman, 05 Nov 2003:
106 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
107 bug only affects the XPC8245 processors
108
wdenk384cc682005-04-03 22:35:21 +0000109* Patches by Josef Wagner, 29 Oct 2004:
110 - Add support for MicroSys CPU87 board
111 - Add support for MicroSys PM854 board
112
113* Patch by Jian Zhang, 02 Nov 2004:
114 Add 16-bit NAND support
115
wdenkc1a11c12005-04-03 21:11:16 +0000116* Patch by Scott McNutt, 01 Nov 2004:
117 Add missing NIOS/NIOS2 support for "iminfo" command
118
119* Patch by Detlev Zundel, 29 Oct 2004:
120 Add missing NIOS/NIOS2 support for "mkimage" tool.
121
wdenk63153492005-04-03 20:55:38 +0000122* Patch by David Adair, 27 Oct 2004:
123 Add missing 440GX SDRAM Controller reset
124
wdenk3ec924a2005-04-03 17:23:39 +0000125* Patch by Steven Scholz, 25 Oct 2004:
126 Declare reset_cpu() in include/common.h instead locally
127
wdenk756f5862005-04-03 15:51:42 +0000128* Patch by Yusdi Santoso, 22 Oct 2004:
129 - Add support for HIDDEN_DRAGON board
130 - fix endianess problem in driver/rtl1839.c
131
132* Patch by Allen Curtis, 21 Oct 2004:
133 support multiple serial ports
134
wdenkb1bf6f22005-04-03 14:52:59 +0000135* Patch by Richard Klingler, 03 Apr 2005:
136 Add call to eth_halt() in net/net.c when called functions fail
137 after eth_init() has been called.
138
139* Patch by Sam Song, 3 April 2005:
140 - Update README.Netconsole
141 - Update README
142
wdenk400558b2005-04-02 23:52:25 +0000143* Prepare for SoC rework of ARM code:
144 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
145 - rename memsetup into lowlevel_init (function name and source files)
wdenk86c98882005-04-03 14:26:46 +0000146 Patch by Steven Scholz, 03 Apr 2005:
147 - create SoC specific directories include/asm-arm/arch-imx and
148 include/asm-arm/arch-s3c24x0
wdenk400558b2005-04-02 23:52:25 +0000149
wdenk414eec32005-04-02 22:37:54 +0000150* Fix problems with SNTP support;
151 enable SNTP support in some boards.
152
wdenkbe6b6e42005-04-01 15:18:44 +0000153* Patches by Martin Krause, 01 Apr 2005:
154 - Fix flash erase timeout on CMC_PU2
155 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenke6ba3c92005-04-01 09:29:14 +0000156
wdenkf50cc092005-04-01 09:14:58 +0000157* Patch by Steven Scholz, 13 March 2005:
158 fix cache enabling for AT91RM9200
159
wdenkea287de2005-04-01 00:25:43 +0000160* Patch by Masami Komiya, 30 Mar 2005:
161 add SNTP support and expand time server and time offset fields of
162 DHCP support. See doc/README.SNTP
163
164* Patch by Steven Scholz, 13 Dec 2004:
165 Fix bug in at91rm920 ethernet driver
166
wdenkef2807c2005-03-31 23:44:33 +0000167* Patch by Steven Scholz, 13 Dec 2004:
168 Remove duplicated code by merging memsetup.S files for
169 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
170
wdenk83e40ba2005-03-31 18:42:15 +0000171* Patch by Detlev Zundel, 31 Mar 2005:
172 Cleanup duplicate definition of overwrite_console()
173
174* Update TQM5200 configuration;
175 prepare for Rev. 200 starter kit boards
176
wdenk0c1c117c2005-03-30 23:28:18 +0000177* Patch by Scott McNutt, 21 Oct 2004:
178 Add support for Nios-II EPCS Controller core.
179
180* Patch by Scott McNutt, 20 Oct 2004:
181 Nios-II cleanups:
182 - Add sysid command (Nios-II only).
183 - Locate default exception trampoline at proper offset.
184 - Implement I/O routines (readb, writeb, etc)
185 - Implement do_bootm_linux
186
wdenk8f0b7cb2005-03-27 23:41:39 +0000187* Patches by Martin Krause, 22 Mar 2005:
188 - use TQM5200_auto as MAKEALL target for TQM5200 systems
189 - add support for SM501 graphics controller
190 - add support for graphic console on TQM5200
191 - add support for TQM5200 Rev 200
192 - cleanup, fix typo in include/configs/TQM5200.h
193
wdenk256d31c2005-03-20 22:33:46 +0000194* Patch by Manfred Baral, 17 Mar 2005:
195 Fix typo
196
wdenke6325152005-03-17 16:43:10 +0000197* Fix RTC configuration for PPChameleon board
198
199* Cleanup, fix typo in include/configs/TQM5200.h
200
stroeseacdcd102005-03-16 20:58:31 +0000201* Patch by Stefan Roese, 16 Mar 2005:
202 Update for esd auto_update and hh405 board
203
wdenk89c02e22005-03-16 16:32:26 +0000204* Adapt for U-Boot image size (new features enabled) on TQM5200
205
wdenk6c9e7892005-03-15 22:56:53 +0000206* Update code for TQM8540 board (and 85xx in general):
207 - Change the name of the Ethernet driver: MOTO ENET -> ENET
208 - Reformat boot messages
209 - Enable redundant environment
210 - Replace the -O2 optimization flag with -mno-string
211
wdenk9d46ea42005-03-14 23:56:42 +0000212* Patch by David Brownell, 10 Mar 2005:
213 Restore copyright statements in OHCI drivers.
214
215* Add support for TQM8540 board
216
wdenkc3fafec2005-03-14 23:01:03 +0000217* Patch by Detlev Zundel, 14 Mar 2005:
218 NC650: changed NAND flash addressing to using UPMB
219
220* Patch by Stefan Roese, 14 Mar 2005:
stroesee9684a52005-03-14 12:56:21 +0000221 Update for esd voh405 fpga image
222
wdenka0bdf492005-03-14 13:14:58 +0000223* INKA4x0: Allow initialization of LCD backlight dimming from
224 "brightness" environment variable.
225
wdenkf4733a02005-03-06 01:21:30 +0000226* Add port initialization for digital I/O on INKA4x0
227
wdenkc3fafec2005-03-14 23:01:03 +0000228* Patch by Stefan Roese, 01 Mar 2005:
stroese47b1e3d2005-03-01 17:26:39 +0000229 Update for esd boards dp405 and hub405
230
wdenkb05dcb52005-03-04 11:27:31 +0000231* Fix get_partition_info() parameter error in all other calls
232 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
233
234* Enable USB and IDE support for INKA4x0 board
235
wdenkc3fafec2005-03-14 23:01:03 +0000236* Patch by Andrew Dyer, 28 Feb 2005:
wdenkb05dcb52005-03-04 11:27:31 +0000237 fix ext2load passing an incorrect pointer to get_partition_info()
238 resulting in load failure for devices other than 0
239
wdenke58cf2a2005-02-27 23:46:58 +0000240* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
241
wdenk1968e612005-02-24 23:23:29 +0000242* Cleanup USB and partition defines
243
wdenk151ab832005-02-24 22:44:16 +0000244* Add support for ext2 filesystems and image timestamps to TQM5200 board
245
246* Add reset code for Coral-P on INKA4x0 board
247
248* Patch by Martin Krause, 28 Jun 2004:
249 Update for TRAB board.
250
251* Fix some missing "volatile"s in MPC5xxx FEC driver
252
wdenke799d372005-02-07 19:44:17 +0000253* Fix cirrus voltage detection (for CPC45)
254
wdenkf8883cb2005-02-04 15:38:08 +0000255* Fix byteorder problem in usbboot and scsiboot commands.
256
wdenk20a80412005-02-04 15:02:06 +0000257* Patch by Cajus Hahn, 04 Feb 2005:
258 - don't insist on leading '/' for filename in ext2load
259 - set default partition to useful value (1) in ext2load
260
261* Patch by Andrew Dyer, 08 Jan 2005:
262 fix wrong return codes in ext2 code
263
wdenk1a344f22005-02-03 23:00:49 +0000264* Removed '--no-warn-mismatch' option from Makefile. This option
265 makes 'ld' to overlook binary objects compatibility.
266
267* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
268 --end-group) outside of the group. This will make 'ld' to do
269 _multiple_ search in the library group when resolving symbol
270 references and do only a _single_ seach in libgcc.a after the group
271 search.
272
273* Fix stability problems on CPC45 board again.
274
275* Make image detection for diskboot / usbboot / scsiboot more robust
276 (also check header checksum)
277
wdenk436be292005-01-31 22:09:11 +0000278* Update CPC45 board configuration.
279
280* Add USB and PCI support for INKA4x0 board
281
wdenkcd172b72005-01-22 18:26:04 +0000282* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
283
wdenkc3d2b4b2005-01-22 18:13:04 +0000284* Code cleanup
285
wdenk5a95f6f2005-01-12 00:38:03 +0000286* Patch by Robin Getz, 13 Oct 2004:
287 Add standalone application to change SMC91C111 MAC addresses,
288 see examples/README.smc91111_eeprom
289
290* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
291 Fix Flash support for ARM Integrator CP.
292
wdenk289f9322005-01-12 00:15:14 +0000293* Patch by Richard Woodruff, 10 Jan 2005:
294 Update support for OMAP2420 (ARM11) and H4 board:
295 o clean up and add new types to H4 memory probe code.
296 o fix to work with internal boot.
297 o added PRCM config III operation.
298 o fix marginal flash timings.
299 o add revison ATAG usage.
300 o enable voltage scaling at power chip.
301 o fix compile error for i2c.
302
303* Fix network problem (error when receiving multiple ARP packets)
304
305* Patch by Daniel Poirot, 12 Oct 2004:
wdenk652a10c2005-01-09 23:48:14 +0000306 Add support for Wind River sbc405 board
307
308* Patch by Rainer Brestan, 12 Oct 2004:
309 Make examples/Makefile more robust
310
wdenk6225c5d2005-01-09 23:33:49 +0000311* Patch by Sam Song, 11 October 2004:
312 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
313 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
314 less than 50MHz
315
316* Patch by Sam Song, 10 Oct 2004:
317 Fix a parameter error in run_command() in main.c
318
319* Patch by Richard Woodruff, 01 Oct 2004:
wdenk8ed96042005-01-09 23:16:25 +0000320 add support for the TI OMAP2420 processor and its H4 reference
321 board
322
323* Patch by Christian Pellegrin, 24 Sep 2004:
324 Added support for NE2000 compatible (DP8390, DP83902) NICs.
325
wdenkff36fd82005-01-09 22:28:56 +0000326* Patch by Leif Lindholm, 23 Sep 2004:
327 add support for the AMD db1550 board
328
329* Patch by Travis Sawyer, 15 Sep 2004:
330 Add CONFIG_SERIAL_MULTI support for ppc4xx,
331 update README.serial_multi
332
wdenk6310eb92005-01-09 21:28:15 +0000333* Patches by David Snowdon, 07 Sep 2004:
334 - add u-boot.hex target in the top level Makefile
335 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
336 - use -mtune=xscale and -march=armv5 options for PXA
337
wdenka562e1b2005-01-09 18:21:42 +0000338* Patch by Florian Schlote, 08 Sep 2004:
339 Add support for SenTec-COBRA5272-board (Coldfire).
340
wdenk30ce5ab2005-01-09 18:12:51 +0000341* Patch by Gleb Natapov, 07 Sep 2004:
342 mpc824x: set PCI latency timer to a sane value
343 (is 0 after reset).
344
345* Patch by Kurt Stremerch, 03 Sep 2004:
346 Add bitstream configuration option for fpga command (Xilinx only).
347
wdenk9dd611b2005-01-09 17:19:34 +0000348* Patch by Kurt Stremerch, 03 Sep 2004:
349 Add Xilinx Spartan2E family FPGA support
350
351* Patch by Jeff Angielski, 02 Sep 2004:
352 Add Added support for H2 revision of the EP8260 board.
353 Fixed formatting for some of the EP8260 related source files.
354
wdenka1191902005-01-09 17:12:27 +0000355* Patch by Jon Loeliger, 02 Sep 2004:
356 Reset monitor size back to 256 so environment can be written
357 to flash on MPC85xx ADS and CDS releases.
358
359* Patch by Paolo Broggini, 02 Sep 2004:
360 Make BSS clearing on ARM systems more robust
361
362* Patch by Yue Hu and Joe, 01 Sep 2004:
363 - add PCI support for ixp425;
364 - add EEPRO100 suppor tfor ixdp425 board.
365
366* Fix problem with protected sector detection in driver/cfi_flash.c
367
368======================================================================
wdenk15c7a8e2005-01-02 17:02:54 +0000369Changes for U-Boot 1.1.2:
wdenk2729af92004-05-03 20:45:30 +0000370======================================================================
371
wdenke2ffd592004-12-31 09:32:47 +0000372* Code cleanup, mostly for GCC-3.3.x
373
374* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
375 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
376 additional ethernet addresses.
377
378* Cleanup drivers/i82365.c - avoid duplication of code
379
380* Fix bogus "cannot span across banks" flash error message
381
382* Code cleanup
383
384* Add support for CompactFlash for the CPC45 Board.
385
wdenk08f27272004-12-19 21:39:27 +0000386* Fix problems with CMC_PU2 flash driver.
387
wdenkec0aee72004-12-19 09:58:11 +0000388* Cleanup:
389 - avoid trigraph warning in fs/ext2/ext2fs.c
390 - rename UC100 -> uc100
391
wdenkf7d15722004-12-18 22:35:43 +0000392* Add support for UC100 board
393
stroese8cba19072004-12-16 18:47:58 +0000394* Patch by Stefan Roese, 16 Dez 2004:
395 - ext2fs support added
396 - Tundra universe support added
397 - Coldfire MCF5249 support added (no preloader needed!)
398 - MCF5249 board TASREG added
399 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
400 VOM405, WUH405
401 - some esd boards updated
402 - memory commands "mdc" and "mwc" added for cyclic read/write
403 (CONFIG_MX_CYCLIC, see README for further description)
404
wdenk138ff602004-12-16 15:52:40 +0000405* Add support for INKA4X0 board
406
wdenk689aec12004-12-13 00:18:44 +0000407* Patch by Steven Scholz, 12 Dec 2004:
408 Fix typo in AT91 memory setup.
409
wdenk7e6bf352004-12-12 22:06:17 +0000410* Patch by Martin Krause, 27 Oct 2004:
411 - add support for "STK52xx" board (including PS/2 multiplexer)
412 - add hardware detection for TQM5200
413
wdenk25d67122004-12-10 11:40:40 +0000414* Clean up CMC PU2 flash driver
415
416* Update MAINTAINERS file
417
418* Fix bug in MPC823 LCD driver
419
wdenked54e622004-11-24 23:35:19 +0000420* Fix udelay() on AT91RM9200 for delays < 1 ms.
421
422* Enable long help on CMC PU2 board;
423 fix reset issue;
424 increase CPU speed from 179 to 207 MHz.
425
wdenkbb310d42004-11-22 22:20:07 +0000426* Fix smc91111 ethernet driver for Xaeniax board (need to handle
427 unaligned tail part specially).
428
wdenk9d5028c2004-11-21 00:06:33 +0000429* Update for AT91RM9200DK and CMC_PU2 boards:
430 - Enable booting directly from flash
431 - fix CMC_PU2 flash driver
432
433* Fix mkimage usage message
434
wdenkcacfab52004-11-17 20:44:20 +0000435* Map SRAM on NC650 board
436
wdenk1f6d4252004-11-02 13:00:33 +0000437* Work around for Ethernet problems on Xaeniax board
438
wdenk983fda82004-10-28 00:09:35 +0000439* Patch by TsiChung Liew, 23 Sep 2004:
440 - add support for MPC8220 CPU
441 - Add support for Alaska and Yukon boards
442
wdenke3c9b9f2004-10-24 23:54:40 +0000443* Fix configuration for ERIC board (needs more room)
444
445* Adjust MIPS compiler options at run-time depending on tools version
446 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
447 "-mcpu=4kc" for old tools)
448
wdenk14699a22004-10-19 22:17:51 +0000449* Add passing of the command line and memory size information to the
450 kernel on xaeniax board.
451
wdenk4cfaf552004-10-11 23:03:10 +0000452* Enable NAND flash support for NC650 board.
453
454* Patch by Thomas Lange 07 Oct 2004:
455 Updated README for DBAu1x00 boards to match current status
456
wdenkd407bf52004-10-11 22:51:13 +0000457* Patch by Philippe Robin, 28 Sept 2004:
458 Fix Flash support for Versatile.
459
460* Patch by Roger Blofeld, 16 Sep 2004:
461 Fix timeout for DHCP command retry
462
wdenk2ee66532004-10-11 22:43:02 +0000463* Patch by Pantelis Antoniou, 14 Sep 2004:
464 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
465
466* Patch by Pantelis Antoniou, 14 Sep 2004:
467 Kick watchdog when bz-decompressing
468
wdenk9455b7f2004-10-11 22:25:49 +0000469* Fix CFG_HZ problems on AT91RM9200 systems
470 [Remember: CFG_HZ should be 1000 on ALL systems!]
471
wdenke1599e82004-10-10 23:27:33 +0000472* Patch by Gridish Shlomi, 30 Aug 2004:
473 - Add support to revA version of PQ27 and PQ27E.
474 - Reverted MPC8260ADS baudrate back to original 115200
475
476* Patch by Hojin, 17 Sep 2004:
477 Fix typo in cfi_flash.c
wdenk8b74bf32004-10-11 23:10:30 +0000478
wdenke1599e82004-10-10 23:27:33 +0000479* Patch by Mark Jonas, 09 September 2004:
480 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
481 error message
482
483* Patch by Mark Jonas, 31 August 2004:
484 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
485 improves FTP performance for MPC5200 systems. Enabled for IceCube
486 by default.
487
wdenkc15f3122004-10-10 22:44:24 +0000488* Patch by Michael Bendzick, 30 Aug 2004:
489 - Improve platform.S code for omap1510inn that detects whether code
490 is running from SDRAM or not. Patch allows SDRAM to be configured
491 if code is running out of SRAM at 0x20000000.
492
493* Patch by Frederick Klatt, 30 Aug 2004:
494 Add support for the Wind River SBC8540/SBC8560 boards
495
wdenk656658d2004-10-10 22:16:06 +0000496* Configure SX1 board to use drivers/cfi_flash.c
497
498* Patches by Michael Bendzick, 30 Aug 2004:
499 - Configure omap1510inn board to use drivers/cfi_flash.c
500 - Make drivers/cfi_flash.c protect environment and redundant
501 environment.
502
503* Patch by Steven Scholz, 23 Jun 2004:
504 - Add script (tools/img2brec.sh) to programm U-Boot into
505 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
506
wdenk5c952cf2004-10-10 21:27:30 +0000507* Patches by Scott McNutt, 24 Aug 2004:
508 - Add support for Altera Nios-II processors.
509 - Add support for Psyent PCI-5441 board.
510 - Add support for Psyent PK1C20 board.
511
wdenk03f5c552004-10-10 21:21:55 +0000512* Patches by Jon Loeliger, 24 Aug 2004:
513 - Add support for the MPC8541 and MPC8555 CDS boards
514 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
515 - Convert MPC85xxADS to use common CFI flash driver
wdenkcf336782004-10-10 20:23:57 +0000516 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
517 from board_early_init_f()
518 - Provide SW workaround for PCI initialization on 85xx CDS
wdenkcf336782004-10-10 20:23:57 +0000519
wdenk08b6aa62004-10-10 18:49:14 +0000520* Patches by George G. Davis, 24 Aug 2004:
521 - Enable ramdisk/initrd tagged param support for omap1610h2_config
522 - Remove static network setup defaults from mx1ads_config
wdenk731215e2004-10-10 18:41:04 +0000523 - update ARM boards to use constants from mach-types.h
524
wdenkb6508512004-10-10 18:03:33 +0000525* Patch by Gary Jennejohn, 04 Oct 2004:
526 - fix I2C on at91rm9200
527 - add support for Ricoh RS5C372A RTC
528
wdenk2cbe5712004-10-10 17:05:18 +0000529* Patch by Gary Jennejohn, 01 Oct 2004:
530 - add support for CMC PU2 board
531 - add support for I2C on at91rm9200
532
533* Patch by Gary Jennejohn, 28 Sep 2004:
534 fix baudrate handling on at91rm9200
535
wdenk659883c2004-10-09 23:33:42 +0000536* Patch by Yuli Barcohen, 22 Aug 2004:
537 - remove ZPC.1900 board-specific flash driver;
538 switch the port to generic CFI driver;
539 - port clean-up
540
wdenkf325e182004-10-09 23:28:40 +0000541* Patch by Hinko Kocevar, 21 Aug 2004:
542 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
543
wdenk8655b6f2004-10-09 23:25:58 +0000544* Clean up tools/bmp_logo.c to not add trailing white space
545
546* Patch by Hinko Kocevar, 21 Aug 2004:
547 - Group common framebuffer functions in common/lcd.c
548 - Group common framebuffer macros and #defines in include/lcd.h
549 - Provide calc_fbsize() for video ATAG
550
wdenk30d56fa2004-10-09 22:44:59 +0000551* Patch by Sam Song, 21 August 2004:
552 - Fix a typo in README
553 - Align "(RO)" output for "flinfo" after "protect on"
554 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
555 ratio 1:1 when core frequency less than 50MHz
556
wdenk8655b6f2004-10-09 23:25:58 +0000557* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk63cfcbb2004-10-09 22:32:26 +0000558 - fix some "use of label at end of compound statement" warnings
559 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
560
wdenk1d9f4102004-10-09 22:21:29 +0000561* Patch by Steven Scholz, 16 Aug 2004:
562 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
563 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
564 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
565 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
566 into cpu/arm920t/$(SOC)/
567
wdenka5bbcc32004-09-29 22:55:14 +0000568* Patches by Sean Chang, 09 Aug 2004:
569 - Added support for both 8 and 16 bit mode access to System ACE CF
570 through MPU.
571 - Fixed missing System ACE CF device during get FAT partition info
572 in fat_register_device function.
573 - Enabled System ACE CF support on ML300.
574
575* Patch by Sean Chang, 09 Aug 2004:
576 Synch defines for saveenv and do_saveenv functions so they get
577 compiled under the same statement.
578
579* Patch by Sean Chang, 09 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +0000580 - Added I2C support for ML300.
581 - Added support for ML300 to read out its environment information
582 stored on the EEPROM.
583 - Added support to use board specific parameters as part of
584 U-Boot's environment information.
585 - Updated MLD files to support configuration for new features
586 above.
587
wdenka5bbcc32004-09-29 22:55:14 +0000588* Patches by Travis Sawyer, 05 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +0000589 - Remove incorrect bridge settings for eth group 6
590 - Add call to setup bridge in ppc_440x_eth_initialize
591 - Fix ppc_440x_eth_init to reset the phy only if its the
592 first time through, otherwise, just check the phy for the
593 autonegotiated speed/duplex. This allows the use of netconsole
594 - only print the speed/duplex the first time the phy is reset.
595
wdenkda93ed82004-09-29 11:02:56 +0000596* Patch by Shlomo Kut, 29 Mar 2004:
597 Add support for MKS Instruments "Quantum" board
598
599* Fix build problem with Cogent boards;
600 avoid using <asm/byteorder.h> when using the host compiler
601
wdenka5725fa2004-09-28 21:51:42 +0000602* Patch by Ganapathi C, 04 Aug 2004:
603 Fix NFS timeout issue
604
wdenke1a3f6b2004-09-28 21:39:45 +0000605* Patch by Yuli Barcohen, 19 Jul 2004:
606 - Fix host tools building in Cygwin environment
607 - Fix header files search order for host tools
608
609* Patch by Tom Armistead, 19 Jul 2004:
610 Fix kgdb.S support for 74xx_75x cpu
611
wdenkc65fdc72004-09-28 21:26:26 +0000612* Patch by Jon Loeliger, 15 Jul 2004:
613 Fix MPC85xx I2C driver
614
wdenk64f70be2004-09-28 20:34:50 +0000615* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
616
wdenkcce625e2004-09-28 19:00:19 +0000617* Patch by Stephen Williams, 15 July 2004
618 Set the PCI class code for JSE board as part of PCI interface setup
619
620* Patch by Michael Bendzick, 15 Jul 2004:
621 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
622 CFG_FLASH_USE_BUFFER_WRITE is set
623
wdenk66ca92a2004-09-28 17:59:53 +0000624* Patch by Yuli Barcohen, 13 Jul 2004:
625 Allow clock setting on MPC866/MPC885 series chips according to
626 environment variable `cpuclk'
627
628* Patch by Yuli Barcohen, 20 Apr 2004:
629 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
630
wdenk4ec3a7f2004-09-28 16:44:41 +0000631* Patch by Vincent Dubey, 24 Sep 2004:
632 Add support for xaeniax board
633
wdenk79536a62004-09-27 20:20:11 +0000634* Add comment about non-GPL character of standalone applications to
635 COPYING file
636
637* Fix FEC ethernet problem on NSCU board.
638
wdenk4734cb72004-09-21 23:33:32 +0000639* Patch by Gary Jennejohn, 09 Sep 2004:
640 allow to use USART1 as console port on at91rm9200dk boards
641
stroesec3548392004-09-16 12:37:13 +0000642* Patch by Stefan Roese, 16 Sep 2004:
643 Update AR405 board.
644
wdenk1d6f9722004-09-09 17:44:35 +0000645* Fix SysClk handling for PPChameleon and CATcenter boards
646
wdenkeedcd072004-09-08 22:03:11 +0000647* Patch by Detlev Zundel, 08 Sep 2004:
648 Update etags build target
649
650* Improve NetConsole support: add support for broadcast destination
651 address and buffered input.
652
653* Cleanup compiler warnings for GCC 3.3.x and later
654
655* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
656
wdenk7ca202f2004-08-28 22:45:57 +0000657* Add support for IDS "NC650" board
658
wdenk31a64922004-08-28 21:09:14 +0000659* Add automatic update support for LWMON board
660
661* Clear Block Lock-Bits when erasing flash on LWMON board.
662
663* Fix return code of "fatload" command
664
665* Enable MSDOS/VFAT filesystem support for LWMON board
666
wdenk89394042004-08-04 21:56:49 +0000667* Patch by Martin Krause, 03 Aug 2004:
668 change timing for SM501 graphics controller on TQM5200 module
669
670* Patch by Mark Jonas, 13 July 2004:
671 - Total5200 LCD now run in little endian mode. Endianess conversion
672 is done in hardware.
wdenk7ca202f2004-08-28 22:45:57 +0000673 - Removed last reference to "console" environment variable.
wdenk89394042004-08-04 21:56:49 +0000674
wdenk429168e2004-08-02 23:39:03 +0000675* Patches by Lars Munch, 12 Jul 2004:
676 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
677 board specific
678 - split out the LXT971A PHY from ns_9750_eth.h
679 - split the dm9161 phy part out of at91rm9200_ether.c
680
wdenk6705d812004-08-02 23:22:59 +0000681* Patch by Andreas Engel, 12 Jul 2004:
682 Replaced hardcoded PL011 clock frequency with config variable.
683 Fixed wrong CONFIG_CMD_DFL doc.
684
685* Patch by Thomas Viehweger, 09 Jun 2004:
686 make it possible to remove chpart when there is only one partition
687
wdenk68ceb292004-08-02 21:11:11 +0000688* Add support for console over UDP (compatible to Ingo Molnar's
689 netconsole patch under Linux)
690
wdenk9aea9532004-08-01 23:02:45 +0000691* Patch by Jon Loeliger, 16 Jul 2004:
692 - support larger DDR memories up to 2G on the PC8540/8560ADS and
693 STXGP3 boards
694 - Made MPC8540/8560ADS be 33Mhz PCI by default.
695 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
696 and CONFIG_L2_INIT_RAM options.
697 - Refactor Local Bus initialization out of SDRAM setup.
698 - Re-implement new version of LBC11/DDR11 errata workarounds.
699 - Moved board specific PCI init parts out of CPU directory.
700 - Added TLB entry for PCI-1 IO Memory
701 - Updated README.mpc85xxads
702
wdenk281e00a2004-08-01 22:48:16 +0000703* Patch by Sascha Hauer, 28 Jun:
704 - add generic support for Motorola i.MX architecture
705 - add support for mx1ads, mx1fs2 and scb9328 boards
706
707* Patches by Marc Leeman, 23 Jul 2004:
708 - Add define for the PCI/Memory Buffer Configuration Register
709 - corrected comments in cpu/mpc824x/cpu_init.c
710
711* Add support for multiple serial interfaces
712 (for example to allow modem dial-in / dial-out)
713
stroese45eeb892004-07-15 14:41:43 +0000714* Patch by Stefan Roese, 15 Jul 2004:
715 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
716
wdenkcfca5e62004-08-01 13:09:47 +0000717* Fix NSCU config; add ethernet wakeup code.
718
wdenk281e00a2004-08-01 22:48:16 +0000719* Add link for preloader for Motorola Coldfire to README.m68k
wdenkcfca5e62004-08-01 13:09:47 +0000720
wdenk75b1fa72004-07-12 22:34:51 +0000721* Patch by Michael Bendzick, 12 Jul 2004:
722 fix output formatting in drivers/cfi_flash.c
723
wdenk07cba352004-07-12 14:37:59 +0000724* Patch by Mark Jonas, 02 Jul 2004:
725 Fix lowboot (again) on MPC5xxx
726
wdenkcdc7fea2004-07-11 22:27:55 +0000727* Patch by Curt Brune, 07 Jul 2004:
728 relocate exception vectors on arm720t if needed
729
wdenka1f4a3d2004-07-11 22:19:26 +0000730* Patch by George G. Davis, 06 Jul 2004:
731 - update mach-types.h to latest arm.linux.org.uk master list
732 - Set correct OMAP1610 bi_arch_number for build target
733
734* Patch by Curt Brune, 06 Jul 2004:
735 evb4510: add support for timer interrupt; cleanup
736
wdenkb9283e22004-07-11 21:49:42 +0000737* Patch by Dan Poirot, 06 Jul 2004:
738 Fix sbc8260 environment variables
739
740* Cleanup redundand "console" environment variable
741
wdenk81050922004-07-11 20:04:51 +0000742* Patch by Mark Jonas, 05 Jul 2004:
743 add support for the Total5100's and Total5200's LCD screen
744
745* Patches by Dan Eisenhut, 01 Jul 2004:
746 - README fixes.
747 - Move doc2000.h include to prevent compiler warning on some boards
748
wdenk6c7a1402004-07-11 19:17:20 +0000749* Patch by Mark Jonas, 01 Jul 2004:
750 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
751 MGT5100 and MPC5200 based Freescale platforms.
752
wdenkbc54f302004-07-11 18:10:30 +0000753* Patch by Philippe Robin, 01 Jul 2004:
754 Add initialization for Integrator and versatile board files.
755
756* Patch by Hinko Kocevar, 01 Jun 2004:
757 Fix VFD FB allocation, add LCD FB allocation on ARM
758
wdenk56523f12004-07-11 17:40:54 +0000759* Patch by Martin Krause, 30 Jun 2004:
760 Add support for TQM5200 board
761
762* Patch by Martin Krause, 29 Jun 2004:
763 Add loopw command: infinite write loop on address range
764
wdenk857cad32004-07-10 23:48:41 +0000765* Patches by Yasushi Shoji, 29 Jun 2004:
766 - add empty include/asm-microblaze/processor.h
767 - add to CREDITS and MAINTAINERS
768 - add gd initialization
769 - add MicroBlaze and SUZAKU board to MAKEALL script
770 - add reset support for SUZAKU
771 - add flush_cache() for MicroBlaze
772 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
773 size flash memory on SUZAKU
774
wdenkfabd46a2004-07-10 23:11:10 +0000775* Patch by Prakash Kumar, 27 Jun 2004:
776 Add support for the PXA250 based Intrinsyc Cerf board.
777
778* Patch by Yasushi Shoji, 27 Jun 2004:
779 fix comment in include/common.h
780
wdenk466b7412004-07-10 22:35:59 +0000781* Rename SBC8560 into sbc8560 for consistency
782
783* Patch by Daniel Poirot, 24 Jun 2004:
784 Add support for Wind River's sbc8240 board
785
786* Patches by Yasushi Shoji, 26 Jun 2004:
787 - drivers/serial_xuartlite.c: fix "return 0" in void function
788 - add microblaze support to mkimage tool
789
wdenk8b07a112004-07-10 21:45:47 +0000790* Patch by Fred Klatt, 25 Jun 2004:
wdenk466b7412004-07-10 22:35:59 +0000791 Add support for WindRiver's sbc8560 board
wdenk8b07a112004-07-10 21:45:47 +0000792
793* Patch by Nicolas Lacressonniere, 24 Jun 2004
794 Small Bugs fixes for "at91rm9200dk" board:
795 - Timing modifications for SPI DataFlash access
796 - Fix NAND flash detection bug
797
798* Patch by Nicolas Lacressonniere, 24 Jun 2004:
799 Add Support for Flash AT49BV6416 for AT91RM9200DK board
800
wdenk0ac6f8b2004-07-09 23:27:13 +0000801* Patch by Jon Loeliger, 17 June 2004:
802 Completion of the 8540ADS/8560ADS updates:
803 Fix some PCI and Rapid I/O memory maps,
804 Initialize both TSEC 1 and 2,
805 Initialize SDRAM
806 Update MAINTAINER for 85xx boards and README.mpc85xxads
807
wdenk26238132004-07-09 22:51:01 +0000808* Patch by Yuli Barcohen, 16 Jun 2004:
809 Remove obsolete AdderII port which was superseded by unified
810 AdderII/Adder87x port
811
812* Patch by Ladislav Michl, 16 Jun 2004:
813 Fix gcc-3.3.3 warnings for smc91111.c
814
stroeseede13022004-07-02 14:38:26 +0000815* Patch by Stefan Roese, 02 Jul 2004:
816 - Fix bug in 405 ethernet driver; allocated data not cleared!
817 - Fix problem in 405 i2c driver; don't try to print without console!
818
wdenk78953f22004-07-01 22:02:29 +0000819* Patch by Paul Ruhland, 11 Jun 2004:
820 Remove debug code from 'board/lpd7a40x/flash.c'
821
wdenke55ca7e2004-07-01 21:40:08 +0000822* Patch by Andrea Marson, 11 Jun 2004:
823 Update for PPChameleon board:
824 - support for SysClk @ 25MHz
825 - support for Silicon Motion SM712 VGA controller
826 - some clean ups
827
wdenk93f6a672004-07-01 20:28:03 +0000828* Patches by Richard Woodruff, 10 Jun 2004:
829 - fix problems with examples/stubs.c for GCC >= 3.4
830 - fix problems with gd initialization
831
wdenk39539882004-07-01 16:30:44 +0000832* Patch by Curt Brune, 17 May 2004:
833 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
834 - Add support for ESPD-Inc. EVB4510 Board
835
836* Patch by Marc Leeman, 11 May 2004:
837 Fix for MPC8245 - reading PPC Memory from another device with the
838 PPC as PCI target device corrupts data due to interenal hardware
839 buffering.
840
wdenke94d2cd2004-06-30 22:59:18 +0000841* Fix "cls" command when used with splash screen
842
843* Increase NFS download timeout (now 1 min - 10 sec is to short for a
844 slow download of a big image)
845
wdenkc3f4d172004-06-25 23:35:58 +0000846* Add "cls" function to MPC823 LCD driver so we can reinitialize the
847 display even after showing a bitmap
848
wdenk49822e22004-06-19 21:19:10 +0000849* Patch by Josef Wagner, 04 Jun 2004:
850 - DDR Ram support for PM520 (MPC5200)
851 - support for different flash types (PM520)
852 - USB / IDE / CF-Card / DiskOnChip support for PM520
853 - 8 bit boot rom support for PM520/CE520
854 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
855 - I2C and RTC support for CPC45
856 - support of new flash type (28F160C3T) for CPC45
857
wdenk46a414d2004-06-17 18:50:45 +0000858* Fix flash parameters passed to Linux for PPChameleon board
859
860* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
861
wdenkf832d8a2004-06-10 21:55:33 +0000862* Patch by Paul Ruhland, 10 Jun 2004:
wdenk49822e22004-06-19 21:19:10 +0000863 fix support for Logic SDK-LH7A404 board and clean up the
wdenkf832d8a2004-06-10 21:55:33 +0000864 LH7A404 register macros.
865
866* Patch by Matthew McClintock, 10 Jun 2004:
867 Modify code to select correct serial clock on Sandpoint8245
868
wdenkb54d32b2004-06-10 21:34:36 +0000869* Patch by Robert Schwebel, 10 Jun 2004:
870 Add support for Intel K3 strata flash.
871
872* Patch by Thomas Brand, 10 Jun 2004:
873 Fix "loads" command on DK1S10 board
874
wdenk2d24a3a2004-06-09 21:50:45 +0000875* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk99edcfb2004-06-09 21:54:22 +0000876 Add support for 8MB flash SIMM and JFFS2 file system on
877 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
878
879* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk2d24a3a2004-06-09 21:50:45 +0000880 Add support for Analogue&Micro Adder87x and the older AdderII board.
881
882* Patch by Ming-Len Wu, 09 Jun 2004:
883 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
884
wdenke63c8ee2004-06-09 21:04:48 +0000885* Patch by Sam Song, 09 Jun 2004:
886 - Add support for RPXlite_DW board
887 - Update FLASH driver for 4*AM29DL323DB90VI
888 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
889
wdenk36c72872004-06-09 17:45:32 +0000890* Patch by Mark Jonas, 08 June 2004:
891 - Make MPC5200 boards evaluate the SVR to print processor name and
892 version in checkcpu() (cpu/mpc5xxx/cpu.c).
893
894* Patch by Kai-Uwe Bloem, 06 May 2004:
895 Fix endianess problem in cramfs code
896
wdenk4c0d4c32004-06-09 17:34:58 +0000897* Patch by Tom Armistead, 04 Jun 2004:
898 Add support for MAX6900 RTC
899
900* Patches by Ladislav Michl, 03 Jun 2004:
901 - fix cfi_flash.c on LE systems
902 - let 'make mrproper' delete u-boot.img as well
903 - turn printf into debug in cfi_flash.c
904
wdenkca0e7742004-06-09 15:37:23 +0000905* Patch by Kurt Stremerch, 28 May 2004:
906 Add support for Exys XSEngine board
907
wdenk697037f2004-06-09 15:29:49 +0000908* Patch by Martin Krause, 27 May 2004:
909 Fix a MPC5xxx I2C timing issue in i2c_probe().
910
911* Patch by Leif Lindholm, 27 May 2004:
912 Fix board_init_f() for dbau1x00 board.
913
wdenk3ff02c22004-06-09 15:25:53 +0000914* Patch by Imre Deak, 26 May 2004:
915 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
916 Set flash base accordingly, and decide whether to do or skip board
917 specific setup steps.
918
919* Patch by Josef Baumgartner, 26 May 2004:
920 Add missing define in include/asm-m68k/global_data.h
921
wdenk70f05ac2004-06-09 15:24:18 +0000922* Patch by Josef Baumgartner, 25 May 2004:
923 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
924
925* Patch by Paul Ruhland, 24 May 2004:
926 fix SDRAM initialization for LPD7A400 board.
927
wdenk13a56952004-06-09 14:58:14 +0000928* Patch by Jian Zhang, 20 May 2004:
929 add support for environment in NAND flash
930
wdenkc3c7f862004-06-09 14:47:54 +0000931* Patch by Yuli Barcohen, 20 May 2004:
932 Add support for Interphase iSPAN boards.
933
934* Patches by Paul Ruhland, 17 May 2004:
935 - Add I/O functions to the smc91111 ethernet driver to support the
936 Logic LPD7A40x boards.
wdenkf39748a2004-06-09 13:37:52 +0000937 - Add support for the Logic Zoom LH7A40x based SDK board(s),
938 specifically the LPD7A400.
939
940* Patches by Robert Schwebel, 15 May 2004:
941 - call MAC address reading code also for SMSC91C111;
942 - make SMSC91C111 timeout configurable, remove duplicate code
943 - fix get_timer() for PXA
944 - update doc/README.JFFS2
945 - use "bootfile" env variable also for jffs2
946
wdenkaa245092004-06-09 12:47:02 +0000947* Patch by Tolunay Orkun, 14 May 2004:
948 Add support for Cogent CSB472 board (8MB Flash Rev)
949
wdenkaa5590b2004-06-09 12:42:26 +0000950* Patch by Thomas Viehweger, 14 May 2004:
951 - flash.h: more flash types added
952 - immap_8260.h: some bits added (useful for RMII)
953 - cmd_coninfo.c: typo corrected, printf -> puts
954 - reduced size by replacing spaces with tab
955
wdenk48abe7b2004-06-09 10:15:00 +0000956* Patch by Robert Schwebel, 13 May 2004:
957 Add 'imgextract' command: extract one part of a multi file image.
958
wdenk547b4cb2004-06-09 00:51:50 +0000959* Patches by Jon Loeliger, 11 May 2004:
wdenk97d80fc2004-06-09 00:34:46 +0000960 Dynamically handle REV1 and REV2 MPC85xx parts.
961 (Jon Loeliger, 10-May-2004).
962 New consistent memory map and Local Access Window across MPC85xx line.
963 New CCSRBAR at 0xE000_0000 now.
964 Add RAPID I/O memory map.
965 New memory map in README.MPC85xxads
966 (Kumar Gala, 10-May-2004)
967 Better board and CPU identification on MPC85xx boards at boot.
968 (Jon Loeliger, 10-May-2004)
969 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
970 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
971 (Jim Robertson, 10-May-2004)
972 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
973 Supports multiple PHYs.
974 (Andy Fleming, 10-May-2004)
975 Some README.MPC85xxads updates.
976 (Kumar Gala, 10-May-2004)
977 Copyright updates for "Freescale"
978 (Andy Fleming, 10-May-2004)
979
wdenk6bdd1372004-06-09 00:15:33 +0000980* Patch by Stephen Williams, 11 May 2004:
981 Add flash support for ST M29W040B
982 Reduce JSE specific flash.c to remove dead code.
983
wdenk356a0d92004-06-09 00:10:59 +0000984* Patch by Markus Pietrek, 04 May 2004:
985 Fix clear_bss code for ARM systems (all except s3c44b0 which
986 doesn't clear BSS at all?)
987
988* Fix "ping" problem on INC-IP board. Strange problem:
989 Sometimes the store word instruction hangs while writing to one of
990 the Switch registers, but only if the next instruction is 16-byte
991 aligned. Moving the instruction into a separate function somehow
992 makes the problem go away.
993
wdenk1eaeb582004-06-08 00:22:43 +0000994* Patch by Rishi Bhattacharya, 08 May 2004:
995 Add support for TI OMAP5912 OSK Board
996
997* Patch by Sam Song May, 07 May 2004:
998 Fix typo of UPM table for rmu board
999
1000* Patch by Pantelis Antoniou, 05 May 2004:
wdenk79fa88f2004-06-07 23:46:25 +00001001 - Intracom board update.
1002 - Add Codec POST.
1003
wdenkcea655a2004-06-06 23:53:59 +00001004* Add support for the second Ethernet interface for the 'PPChameleon'
1005 board.
1006
wdenka56bd922004-06-06 23:13:55 +00001007* Patch by Dave Peverley, 30 Apr 2004:
1008 Add support for OMAP730 Perseus2 Development board
1009
1010* Patch by Alan J. Luse, 29 Apr 2004:
1011 Fix flash chip-select (OR0) option register setting on FADS boards.
1012
1013* Patch by Alan J. Luse, 29 Apr 2004:
1014 Report MII network speed and duplex setting properly when
1015 auto-negotiate is not enabled.
1016
1017* Patch by Jarrett Redd, 29 Apr 2004:
1018 Fix hang on reset on Ocotea board due to flash in wrong mode.
1019
wdenk5ca26792004-06-06 22:11:41 +00001020* Patch by Dave Peverley, 29 Apr 2004:
1021 add MAC address detection to smc91111 driver
1022
1023* Patch by David Müller, 28 Apr 2004:
1024 fix typo in lib_arm/board.c
1025
wdenk17ea1172004-06-06 21:51:03 +00001026* Patch by Tolunay Orkun, 20 Apr 2004:
1027 - README update: add CONFIG_CSB272 and csb272_config
1028 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
1029 i2cfast environment variable
1030
wdenk11142572004-06-06 21:35:06 +00001031* Patch by Yuli Barcohen, 19 Apr 2004:
1032 - Rename DUET_ADS to MPC885ADS
1033 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
1034 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
1035 - Clean up FADS family port to use the new defines
1036
wdenk979bdbc2004-06-01 21:08:17 +00001037* Fix PCI support on CPC45 board
1038
wdenke4cc71a2004-05-19 21:33:14 +00001039* Patch by Scott McNutt, 25 Apr 2004:
1040 Add Nios GDB/JTAG Console support:
1041 - Add stubs to support gdb via JTAG.
1042 - Add support for console over JTAG.
1043 - Minor cleanup.
1044
wdenk10767cc2004-05-13 13:23:58 +00001045* Add support for CATcenter board (based on PPChameleon ME module)
1046
wdenk02b11f82004-05-12 22:54:36 +00001047* Patch by Klaus Heydeck, 12 May 2004:
1048 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
1049 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
1050 various changes to KUP4 board specific files
1051
wdenk6c1362c2004-05-12 22:18:31 +00001052* Fix minor network problem on MPC5200: need some delay between
1053 resetting the PHY and sending the first packet. Implemented in a
1054 "natural" way by invoking the PHY reset and initialization code
1055 only once after power on vs. each time the interface is brought up.
1056
wdenk9d9e2832004-05-11 21:53:55 +00001057* Add some limited support for low-speed devices to SL811 USB controller
1058 (at least "usb reset" now passes successfully and "usb info" displays
1059 correct information)
1060
wdenkbaac6072004-05-08 20:33:20 +00001061* Change init sequence for multiple network interfaces: initialize
1062 on-chip interfaces before external cards.
1063
wdenk32877d62004-05-05 19:44:41 +00001064* Fix memory leak in the NAND-specific JFFS2 code
1065
1066* Fix SL811 USB controller when attached to a USB hub
1067
wdenk62b4ac92004-05-05 08:31:53 +00001068* Fix config option spelling in PM520 config file
1069
1070* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
1071 patches by Pantelis Antoniou, 30 Mar 2004)
1072
wdenk2729af92004-05-03 20:45:30 +00001073* Fix minor NAND JFFS2 related issue
1074
1075* Fixes for SL811 USB controller:
1076 - implement workaround for broken memory stick
1077 - improve error handling
1078
1079* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
1080 cope with congested networks.
1081
1082======================================================================
wdenk56b86bf2004-04-12 14:31:43 +00001083Changes for U-Boot 1.1.1:
1084======================================================================
wdenk507bbe32004-04-18 21:13:41 +00001085
wdenkfc1cfcd2004-04-25 15:41:35 +00001086* Patch by Travis Sawyer, 23 Apr 2004:
1087 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
1088 errata from Vitesse Semiconductor.
wdenk0b8fa032004-04-25 14:37:29 +00001089
1090* Patch by Philippe Robin, 22 Apr 2004:
wdenk02b11f82004-05-12 22:54:36 +00001091 Fix ethernet configuration for "versatile" board
wdenk0b8fa032004-04-25 14:37:29 +00001092
1093* Patch by Kshitij Gupta, 21 Apr 2004:
1094 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
1095
1096* Patch by Steven Scholz, 24 Feb 2004:
1097 Fix a bug in AT91RM9200 ethernet driver:
1098 The MII interface is now initialized before accessing the PHY.
1099
wdenkb9711de2004-04-25 13:18:40 +00001100* Patch by John Kerl, 19 Apr 2004:
1101 Use U-boot's miiphy.h for PHY register names, rather than
1102 introducing a new header file.
1103
1104* Update pci_ids.h from linux-2.4.26
1105
1106* Patch by Masami Komiya, 19 Apr 2004:
1107 Fix problem cause by VLAN function on little endian architecture
1108 without VLAN environment
1109
wdenke9132ea2004-04-24 23:23:30 +00001110* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenkb9711de2004-04-25 13:18:40 +00001111 binary image for all clock frequencies. Implement run-time
wdenke9132ea2004-04-24 23:23:30 +00001112 optimization of flash access timing based on the actual bus
1113 frequency.
1114
wdenk5cf91d62004-04-23 20:32:05 +00001115* Modify KUP4X board configuration to use SL811 driver for USB memory
1116 sticks (including FAT / VFAT filesystem support)
1117
1118* Add SL811 Host Controller Interface driver for USB
1119
1120* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
1121
1122* Patch by Pantelis Antoniou, 19 Apr 2004:
1123 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
1124 Minor patches for Intracom boards.
1125
1126* Patch by Christian Pell, 19 Apr 2004:
1127 cleanup support for CF/IDE on PCMCIA for PXA25X
1128
wdenke35745b2004-04-18 23:32:11 +00001129* Temporarily disabled John Kerl's extended MII command code because
1130 "miivals.h" is missing
1131
1132* Patches by Mark Jonas, 13 Apr 2004:
1133 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
1134 - Add sync instructions to IceCube SDRAM init code
1135 - Move SDRAM chip constants into seperate include files
1136 - Unify DDR and SDR initialization code
1137 - Unify all IceCube (Lite5xxx) target names
1138
wdenk24711112004-04-18 22:57:51 +00001139* Patch by John Kerl, 16 Apr 2004:
1140 Enable ranges in mii command, e.g. mii read 0-1f 0 or
1141 mii read 4-7 18-1a. Also add mii dump subcommand for
1142 pretty-printing standard regs 0-5.
1143
1144* Patch by Stephen Williams, 16 April 2004:
1145 fix typo in JSE.h; update MAINTAINERS
1146
wdenk498b8db2004-04-18 22:26:17 +00001147* Patch by Matthew S. McClintock, 14 Apr 2004:
1148 fix initdram function for utx8245 board
1149
1150* Patch by Markus Pietrek, 14 Apr 2004:
1151 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
1152
1153* Patch by Reinhard Meyer, 18 Apr 2004:
1154 provide the IDE Reset Function for EMK 5200 boards
1155
1156* Patch by Masami Komiya, 12 Apr 2004:
1157 fix pci_hose_write_config_{byte,word}_via_dword problems
1158
wdenka8bd82d2004-04-18 22:03:42 +00001159* Patch by Sangmoon Kim, 12 Apr 2004:
1160 Update max RAM size for debris board
1161
1162* Patch by Travis Sawyer, 08 Apr 2004:
1163 Add TLB entry for second DIMM slot on ocotea
1164
1165* Patch by Masami Komiya, 08 Apr 2004:
1166 add RTL8169 network driver
1167
wdenk7abf0c52004-04-18 21:45:42 +00001168* Patch by Dan Malek, 07 Apr 2004:
1169 - Add support for RPC/STx GP3, Motorola 8560 board
1170 - Update 85xx TSEC driver so it searches MII for first available PHY
1171 and uses that one.
1172 - Add functions to support console MII commands.
1173
1174* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka8bd82d2004-04-18 22:03:42 +00001175 Move initialization of bi_iic_fast[]
wdenk7abf0c52004-04-18 21:45:42 +00001176 from board_init_f() to board_init_r()
1177
1178* Patch by Yasushi Shoji, 07 Apr 2004:
1179 Cleanup microblaze port
1180
1181* Patch by Sangmoon Kim, 07 Apr 2004:
1182 Add auto SDRAM module detection for Debris board
1183
wdenkd4326ac2004-04-18 21:17:30 +00001184* Patch by Rune Torgersen, 06 Apr 2004:
1185 - Fix some PCI problems on the MPC8266ADS board
1186 - Fix the location of some PCI entries in the immap structure
1187
wdenk507bbe32004-04-18 21:13:41 +00001188* Patch by Yasushi Shoji, 07 Apr 2004:
1189 - add support for microblaze processors
1190 - add support for AtmarkTechno "suzaku" board
1191
wdenk998eaae2004-04-18 19:43:36 +00001192* Configure PPChameleon board to use redundand environment in flash
1193
1194* Configure PPChameleon board to use JFFS2 NAND support.
1195
1196* Added support for JFFS2 filesystem (read-only) on top of NAND flash
1197
wdenk6e592382004-04-18 17:39:38 +00001198* Patch by Rune Torgersen, 16 Apr 2004:
1199 LBA48 fixes
wdenk56b86bf2004-04-12 14:31:43 +00001200
wdenkc26e4542004-04-18 10:13:26 +00001201* Patches by Pantelis Antoniou, 16 Apr 2004:
1202 - add support for a new version of an Intracom board and fix
1203 various other things on others.
1204 - add verify support to the crc32 command (define
1205 CONFIG_CRC32_VERIFY to enable it)
1206 - fix FEC driver for MPC8xx systems:
1207 1. fix compilation problems for boards that use dynamic
1208 allocation of DPRAM
1209 2. shut down FEC after network transfers
1210 - HUSH parser fixes:
1211 1. A new test command was added. This is a simplified version of
1212 the one in the bourne shell.
1213 2. A new exit command was added which terminates the current
1214 executing script.
1215 3. Fixed handing of $? (exit code of last executed command)
wdenk6e592382004-04-18 17:39:38 +00001216 - Fix some compile problems;
1217 add "once" functionality for the netretry variable
wdenkc26e4542004-04-18 10:13:26 +00001218
wdenkea66bc82004-04-15 23:23:39 +00001219* Patch by George G. Davis, 02 Apr 2004:
1220 add support for Intel Assabet board
1221
wdenkdb01a2e2004-04-15 23:14:49 +00001222* Patch by Stephen Williams, 01 Apr 2004:
1223 Add support for Picture Elements JSE board
1224
1225* Patch by Christian Pell, 01 Apr 2004:
1226 Add CompactFlash support for PXA systems.
1227
wdenk04a85b32004-04-15 18:22:41 +00001228* Patches by Pantelis Antoniou, 30 Mar 2004:
1229 - add auto-complete support to the U-Boot CLI
1230 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk5a8c51c2004-04-15 21:16:42 +00001231 - add support for the Epson 156x series of graphical displays
1232 (These displays are serial and not suitable for using a normal
1233 framebuffer console on them)
1234 - add infrastructure needed in order to POST any DSPs in a board
wdenka6ab4bf2004-04-15 21:31:56 +00001235 - improve and fix various things in the MPC8xx FEC driver:
1236 1. The new 87x and 88x series of processors have two FECs,
1237 and the new driver supports them both.
1238 2. Another change in the 87x/88x series is support for
1239 the RMII (Reduced MII) interface. However numerous
1240 changes are needed to make it work since the PHYs
1241 are connected to the same lines. That means that
1242 you have to address them correctly over the MII
1243 interface.
1244 3. We now correctly match the MII/RMII interface
1245 configuration to what the PHY reports.
wdenka3d991b2004-04-15 21:48:45 +00001246 - Fix problem when readingthe MII status register. Due to the
1247 internal design of many PHYs you have to read the register
1248 twice. The problem is more apparent in 10Mbit mode.
1249 - add new mode ".jffs2s" for reading from a NAND device: it just
1250 skips over bad blocks.
1251 - add networking support for VLANs (802.1q), and CDP (Cisco
1252 Discovery Protocol)
wdenkbda6c8a2004-04-15 21:58:11 +00001253 - some minor patches / cleanup
wdenk04a85b32004-04-15 18:22:41 +00001254
1255* Patch by Yuli Barcohen, 28 Mar 2004:
1256 - Add support for MPC8272 family including MPC8247/8248/8271/8272
1257 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
1258 - Change configuration method for MPC8260ADS family
1259
wdenkd716b122004-04-12 16:12:49 +00001260* add startup code to clear the BSS of standalone applications
1261
wdenk56b86bf2004-04-12 14:31:43 +00001262* Fix if / elif handling bug in HUSH shell
1263
1264======================================================================
wdenkf525c8a2004-04-10 20:44:51 +00001265Changes for U-Boot 1.1.0:
wdenkc83bf6a2004-01-06 22:38:14 +00001266======================================================================
1267
wdenk7e780362004-04-08 22:31:29 +00001268* Patch by Mark Jonas: Remove config.tmp files only when
1269 unconfiguring the board
1270
1271* Adapt RMU board for bigger flash memory
1272
wdenk0608e042004-03-25 19:29:38 +00001273* Patch by Klaus Heydeck, 13 Mar 2003:
1274 Add support for KUP4X Board
1275
wdenk518e2e12004-03-25 14:59:05 +00001276* Patch by Pavel Bartusek, 21 Mar 2004
1277 Add Reiserfs support
1278
1279* Patch by Hinko Kocevar, 20 Mar 2004
1280 - Add auto-release for SMSC LAN91c111 driver
1281 - Add save/restore of PTR and PNR regs as suggested in datasheet
1282
wdenk6fb6af62004-03-23 23:20:24 +00001283* Patch by Stephen Williams, 19 March 2004
1284 Increase speed of sector reads from SystemACE,
1285 shorten poll timeout and remove a useless reset
1286
1287* Patch by Tolunay Orkun, 19 Mar 2004:
1288 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
1289 (CONFIG_PHY_GIGE)
1290
1291* Patch by Brad Kemp, 18 Mar 2004:
1292 prevent machine checks during a PCI scan
1293
1294* Patch by Pierre Aubert, 18 Mar 2004:
1295 Fix string cleaning in IDE identification
1296
wdenkeeb1b772004-03-23 22:53:55 +00001297* Patch by Pierre Aubert, 18 Mar 2004:
1298 - Unify video mode handling for Chips & Technologies 69000 Video
1299 chip and Silicon Motion SMI 712/710/810 Video chip
1300 - Add selection of the video output (CRT or LCD) via 'videoout'
1301 environment variable for the Silicon Motion
1302 - README update
1303
1304* Patch by Pierre Aubert, 18 Mar 2004:
1305 include/common.h typo fix
1306
1307* Patches by Tolunay Orkun, 17 Mar 2004:
1308 - Add support for bd->bi_iic_fast[] initialization via environment
1309 variable "i2cfast" (CONFIG_I2CFAST)
1310 - Add "i2cfast" u-boot environment variable support for csb272
1311
wdenk27aa8182004-03-23 22:37:33 +00001312* Patch by Carl Riechers, 17 Mar 2004:
1313 Ignore '\0' characters in console input for use with telnet and
1314 telco pads.
1315
1316* Patch by Leon Kukovec, 17 Mar 2004:
1317 typo fix for strswab prototype #ifdef
1318
wdenk4b9206e2004-03-23 22:14:11 +00001319* Patches by Thomas Viehweger, 16 Mar 2004:
1320 - show PCI clock frequency on MPC8260 systems
1321 - add FCC_PSMR_RMII flag for HiP7 processors
1322 - in do_jffs2_fsload(), take load address from load_addr if not set
1323 explicit, update load_addr otherwise
1324 - replaced printf by putc/puts when no formatting is needed
1325 (smaller code size, faster execution)
1326
wdenk109c0e32004-03-23 21:43:07 +00001327* Patch by Phillippe Robin, 16 Mar 2004:
1328 avoid dereferencing NULL pointer in lib_arm/armlinux.c
1329
1330* Patch by Stephen Williams, 15 Mar 2004:
1331 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
1332
1333* Patch by Tolunay Orkun, 15 Mar 2004:
1334 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
1335
1336* Patch by Travis Sawyer, 15 Mar 2004:
1337 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
1338
wdenkefa329c2004-03-23 20:18:25 +00001339* Add start-up delay to make sure power has stabilized before
1340 attempting to switch on USB on SX1 board.
1341
1342* Patch by Josef Wagner, 18 Mar 2004:
1343 - Add support for MicroSys XM250 board (PXA255)
1344 - Add support for MicroSys PM828 board (MPC8280)
1345 - Add support for 32 MB Flash on PM825/826
1346 - new SDRAM refresh rate for PM825/PM826
1347 - added support for MicroSys PM520 (MPC5200)
1348 - replaced Query by Identify command in CPU86/flash.c
1349 to support 28F160F3B
1350
1351* Fix wrap around problem with udelay() on ARM920T
1352
1353* Add support for Macronix flash on TRAB board
1354
wdenk7d7ce412004-03-17 01:13:07 +00001355* Patch by Pierre Aubert, 15 Mar 2004:
1356 Fix buffer overflow in IDE identification
1357
1358* Fix power-off of LCD for out-of-band temperatures on LWMON board
1359
1360* Remove redundand #define in IceCube.h
1361
wdenkd9df1f42004-03-15 09:00:01 +00001362* Patch by Steven Scholz, 27 Feb 2004:
1363 - Adding get_ticks() and get_tbclk() for AT91RM9200
1364 - Many white space fixes in cpu/at91rm9200/interrupts.c
1365
1366* Patches by Steven Scholz, 20 Feb 2004:
1367 some cleanup in AT91RM9200 related code
1368
wdenk855a4962004-03-14 18:23:55 +00001369* Patches by Travis Sawyer, 12 Mar 2004:
1370 - Fix Gigabit Ethernet support for 440GX
1371 - Add Gigabit Ethernet Support to MII PHY utilities
1372
1373* Patch by Brad Kemp, 12 Mar 2004:
1374 Fixes for drivers/cfi_flash.c:
1375 - Better support for x8/x16 implementations
1376 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
1377 - Added defines for AMD command and address constants
1378
1379* Patch by Leon Kukovec, 12 Mar 2004:
1380 Fix get_dentfromdir() to correctly handle deleted dentries
wdenk42dfe7a2004-03-14 22:25:36 +00001381
wdenk855a4962004-03-14 18:23:55 +00001382* Patch by George G. Davis, 11 Mar 2004:
1383 Remove hard coded network settings in TI OMAP1610 H2
1384 default board config
1385
1386* Patch by George G. Davis, 11 Mar 2004:
1387 add support for ADS GraphicsClient+ board.
1388
wdenk7d7ce412004-03-17 01:13:07 +00001389* Patch by Pierre Aubert, 11 Mar 2004:
wdenk4b248f32004-03-14 16:51:43 +00001390 - add bitmap command and splash screen support in cfb console
1391 - add [optional] origin in the bitmap display command
1392
1393* Patch by Travis Sawyer, 11 Mar 2004:
1394 Fix ocotea board early init interrupt setup.
1395
1396* Patch by Thomas Viehweger, 11 Mar 2004:
1397 Remove redundand code; add PCI-specific bits to include/mpc8260.h
1398
wdenkaaf224a2004-03-14 15:20:55 +00001399* Patch by Stephan Linz, 09 Mar 2004
1400 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
1401
1402* Patch by George G. Davis, 9 Mar 2004:
1403 fix recent build failure for SA1100 target
1404
1405* Patch by Travis Sawyer, 09 Mar 2004:
1406 Support native interrupt mode for the IBM440GX.
1407 Previously it was running in 440GP compatibility mode.
1408
wdenk3d3befa2004-03-14 15:06:13 +00001409* Patch by Philippe Robin, 09 Mar 2004:
1410 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
1411 Platform support.
1412
1413* Patch by Masami Komiya, 08 Mar 2004:
1414 Don't overwrite server IP address or boot file name
1415 when the boot server does not return values
1416
wdenk7d7ce412004-03-17 01:13:07 +00001417* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk3d3befa2004-03-14 15:06:13 +00001418 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
1419
wdenk4d13cba2004-03-14 14:09:05 +00001420* Patch by Tolunay Orkun, 5 Mar 2004:
1421 Fix early board initialization for Cogent CSB272 board
1422
1423* Patch by Ed Okerson, 3 Mar 2004:
1424 fix CFI flash writes for little endian systems
1425
1426* Patch by Reinhard Meyer, 01 Mar 2004:
1427 generalize USB and IDE support for MPC5200 with according
1428 changes to IceCube.h and TOP5200.h
1429 add Am29LV256 256 MBit FLASH support for TOP5200 boards
1430 add info about USB and IDE to README
1431
wdenkc3f9d492004-03-14 00:59:59 +00001432* Patch by Yuli Barcohen, 4 Mar 2004:
1433 Fix problems with GCC 3.3.x which changed handling of global
1434 variables explicitly initialized to zero (now in .bss instead of
1435 .data as before).
1436
1437* Patch by Leon Kukovec, 02 Mar 2004:
1438 add strswab() to fix IDE LBA capacity, firmware and model numbers
1439 on little endian machines
1440
1441* Patch by Masami Komiya, 02 Mar 2004:
1442 - Remove get_ticks() from NFS code
1443 - Add verification of RPC transaction ID
1444
1445* Patch by Pierre Aubert, 02 Mar 2004:
1446 cleanup for IDE and USB drivers for MPC5200
1447
1448* Patch by Travis Sawyer, 01 Mar 2004:
wdenk0e6d7982004-03-14 00:07:33 +00001449 Ocotea:
1450 - Add IBM PPC440GX Ref Platform support (Ocotea)
1451 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
1452 Adapted to U-Boot and 440GX port
1453 440gx_enet.c:
1454 - Add gracious handling of all Ethernet Pin Selections for 440GX
1455 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
1456 ppc440.h:
1457 - Add needed bit definitions
1458 - Fix formatting
1459
1460* Patch by Carl Riechers, 1 Mar 2004:
1461 Add PPC440GX prbdv0 divider to fix memory clock calculation.
1462
1463* Patch by Stephan Linz, 27 Feb 2004
1464 - avoid problems for targets without NFS download support
1465
wdenkc40b2952004-03-13 23:29:43 +00001466* Patch by Rune Torgersen, 27 Feb 2004:
1467 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
1468 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
1469 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
1470
1471* Patch by Masami Komiya, 27 Feb 2004:
1472 Fix rarpboot: add autoload by NFS
1473
1474* Patch by Dan Eisenhut, 26 Feb 2004:
1475 fix flash_write return value in saveenv
1476
1477* Patch by Stephan Linz, 11 Dec 2003
1478 expand config.mk to avoid trigraph warnings on NIOS
1479
1480* Rename "BMS2003" board into "HMI10"
1481
wdenk6629d2f2004-03-12 15:38:25 +00001482* SX1 patches: use "serial#" for USB serial #; use redundand environment
1483 storage; auto-set console on USB port (using preboot command)
1484
wdenk232c1502004-03-12 00:14:09 +00001485* Add support for SX1 mobile phone; add support for USB-based console
1486 (enable with "setenv stdout usbtty; setenv stdin usbtty")
1487
wdenk79d696f2004-03-11 22:46:36 +00001488* Fix LOWBOOT configuration for MPC5200 with DDR memory
1489
wdenkf8d813e2004-03-02 14:05:39 +00001490* Fix SDRAM timings for LITE5200 / IceCube board
1491
1492* Handle Auti-MDIX / connection status for INCA-IP
1493
1494* Fix USB problems when attempting to read 0 bytes
1495
wdenke7c85682004-02-27 08:21:54 +00001496* Patch by Travis Sawyer, 26 Feb 2004:
1497 Fix broken compile for XPEDITE1K target.
1498
1499* Patch by Stephan Linz, 26 Feb 2004:
1500 Bug fix for NFS code on NIOS targets
wdenk232c1502004-03-12 00:14:09 +00001501
wdenke7c85682004-02-27 08:21:54 +00001502* Patch by Stephen Williams, 26 Feb 2004:
1503 Break up SystemACE reads of large block counts
1504
wdenk132ba5f2004-02-27 08:20:54 +00001505* Patch by Pierre Aubert, 26 Feb 2004
1506 add IDE support for MPC5200
1507
1508* Patch by Masami Komiya, 26 Feb 2004:
1509 add autoload via NFS
1510
1511* Patch by Stephen Williams
1512 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
1513 elsewhere in the source.
1514
wdenk11dadd52004-02-27 00:07:27 +00001515* Patch by Steven Scholz, 25 Feb 2004:
1516 - Timeouts in FPGA code should be based on CFG_HZ
1517 - Minor cleanup in code for Altera FPGA ACEX1K
1518
1519* Patch by Steven Scholz, 25 Feb 2004:
1520 Changed "Directory Hierarchy" section in README
1521
1522* Patch by Masami Komiya, 25 Feb 2004:
1523 Reduce copy count in nfs_read_reply() of NFS code
1524
wdenk80885a92004-02-26 23:46:20 +00001525* Patch by Markus Pietrek, 24 Feb 2004:
1526 NS9750 DevBoard added
1527
wdenk132ba5f2004-02-27 08:20:54 +00001528* Patch by Pierre Aubert, 24 Feb 2004
wdenk80885a92004-02-26 23:46:20 +00001529 add USB support for MPC5200
1530
1531* Patch by Steven Scholz, 24 Feb 2004:
1532 - fix MII commands to use values from last command
1533
1534* Patch by Torsten Demke, 24 Feb 2004:
1535 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
1536
wdenk0c852a22004-02-26 23:01:04 +00001537* Patch by Rahul Shanbhag, 19 Feb 2004:
1538 Fixes for for OMAP1610 board:
1539 - shift some IRQ specific code to platform.S file
1540 - remove duplicatewatchdog reset code from start.S
1541
1542* Make Auto-MDIX Support configurable on INCA-IP board
1543
1544* Fix license for mkimage tool
1545
wdenka084f7d2004-02-24 22:33:21 +00001546* Patch by Masami Komiya, 24 Feb 2004:
1547 Update NetBootFileXferSize in NFS code
1548
1549* Patch by Scott McNutt, 24 Feb 2004:
1550 fix packet length in NFS code
1551
wdenkcbd8a352004-02-24 02:00:03 +00001552* Patch by Masami Komiy, 22 Feb 2004:
1553 Add support for NFS for file download
1554
wdenk074cff02004-02-24 00:16:43 +00001555* Patch by Andrea Scian, 17 Feb 2004:
1556 Add support for S3C44B0 processor and DAVE B2 board
1557
1558* Patch by Steven Scholz, 20 Feb 2004:
1559 - Add support for MII commands on AT91RM9200 boards
1560 - some cleanup in AT91RM9200 ethernet code
1561
wdenk028ab6b2004-02-23 23:54:43 +00001562* Patch by Peter Ryser, 20 Feb 2004:
1563 Add support for the Xilinx ML300 platform
1564
1565* Patch by Stephan Linz, 17 Feb 2004:
1566 Fix watchdog support for NIOS
1567
1568* Patch by Josh Fryman, 16 Feb 2004:
1569 Fix byte-swapping for cfi_flash.c for different bus widths
1570
1571* Patch by Jon Diekema, 14 Jeb 2004:
1572 Remove duplicate "FPGA Support" notes from the README file
1573
wdenk63e73c92004-02-23 22:22:28 +00001574* Patches by Reinhard Meyer, 14 Feb 2004:
1575 - update board/emk tree; use common flash driver
1576 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
1577 [adapted for other PPC CPUs -- wd]
1578 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
1579
1580* Patch by Jon Diekema, 13 Feb 2004:
1581 Call show_boot_progress() whenever POST "FAILED" is printed.
1582
1583* Patch by Nishant Kamat, 13 Feb 2004:
1584 Add support for TI OMAP1610 H2 Board
1585 Fixes for cpu/arm926ejs/interrupt.c
1586 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
1587 Fix for a timer bug in OMAP1610 Innovator
1588 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
1589
1590* Patches by Stephan Linz, 12 Feb 2004:
1591 - add support for NIOS timer with variable period preload counter value
1592 - prepare POST framework support for NIOS targets
1593
1594* Patch by Denis Peter, 11 Feb 2004:
1595 add POST support for the MIP405 board
1596
wdenkcd0a9de2004-02-23 20:48:38 +00001597* Patch by Laurent Mohin, 10 Feb 2004:
1598 Fix buffer overflow in common/usb.c
1599
1600* Patch by Tolunay Orkun, 10 Feb 2004:
1601 Add support for Cogent CSB272 board
1602
wdenk2d1a5372004-02-23 19:30:57 +00001603* Patch by Thomas Elste, 10 Feb 2004:
1604 Add support for NET+50 CPU and ModNET50 board
1605
1606* Patch by Sam Song, 10 Feb 2004:
1607 Fix typos in cfi_flash.c
1608
1609* Patch by Leon Kukovec, 10 Feb 2004
1610 Fixed long dir entry slot id calculation in get_vfatname
1611
1612* Patch by Robin Gilks, 10 Feb 2004:
1613 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
1614 !=, <>, <, >, <=, >=)
1615
wdenk3f85ce22004-02-23 16:11:30 +00001616* Fix problem with side effects in macros in include/usb.h
1617
1618* Patch by David Benson, 13 Nov 2003:
1619 bug 841358 - fix TFTP download size limit
1620
1621* Fixing bug 850768:
1622 improper flush_cache() in load_serial()
1623
1624* Fixing bug 834943:
1625 MPC8540 - missing volatile declarations
1626
1627* Patch by Stephen Williams, 09 Feb 2004:
1628 Add support for Xilinx SystemACE chip:
1629 - New files common/cmd_ace.c and include/systemace.h
1630 - Hook systemace support into cmd_fat and the partition manager
1631
1632* Patch by Travis Sawyer, 09 Feb 2004:
1633 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
1634
wdenk3c74e322004-02-22 23:46:08 +00001635* Patch by Travis Sawyer, 09 Feb 2004:
1636 o 440GX:
1637 - Fix PCI Indirect access for type 1 config cycles with ppc440.
1638 - Add phymode for 440 enet
1639 - fix pci pre init
1640 o XPedite1K:
1641 - Change board_pre_init to board_early_init_f
1642 - Add user flash to bus controller setup
1643 - Fix pci pre init
1644 - Fix is_pci_host to check GPIO for monarch bit
1645 - Force xpedite1k to pci conventional mode (via #define option)
1646
1647* Patch by Brad Kemp, 4 Feb 2004:
1648 - handle the machine check that is generated during the PCI scans
1649 on 82xx processors.
1650 - define the registers used in the IMMR by the PCI subsystem.
1651
1652* Patch by Pierre Aubert, 03 Feb 2004:
1653 cpu/mpc5xxx/start.S: copy MBAR into SPR311
1654
1655* Patch by Jeff Angielski, 03 Feb 2004:
1656 Fix copy & paste error in cpu/mpc8260/pci.c
1657
1658* Patch by Reinhard Meyer, 24 Jan 2004:
1659 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
1660
wdenkcf56e112004-02-20 22:02:48 +00001661* Add Auto-MDIX support for INCA-IP
1662
wdenkbf9e3b32004-02-12 00:47:09 +00001663* Some code cleanup
1664
1665* Patch by Josef Baumgartner, 10 Feb 2004:
1666 Fixes for Coldfire port
1667
1668* Patch by Brad Kemp, 11 Feb 2004:
1669 Fix CFI flash driver problems
1670
wdenka2d18bb2004-02-11 21:35:18 +00001671* Make sure to use a bus clock divider of 2 only when running TQM8xxM
1672 modules at CPU clock frequencies above 66 MHz.
wdenkbf9e3b32004-02-12 00:47:09 +00001673
wdenka2d18bb2004-02-11 21:35:18 +00001674* Optimize flash programming speed for LWMON (by another 100% :-)
1675
wdenkcd37d9e2004-02-10 00:03:41 +00001676* Patch by Jian Zhang, 3 Feb 2004:
1677 - Changed the incorrect FAT12BUFSIZE
1678 - data_begin in fsdata can be negative. Changed it to be short.
1679
wdenkec4c5442004-02-09 23:12:24 +00001680* Patches by Stephan Linz, 30 Jan 2004:
1681 1: - board/altera/common/flash.c:flash_erase():
1682 o allow interrupts befor get_timer() call
1683 o check-up each erased sector and avoid unexpected timeouts
1684 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
1685 o enclose sevenseg_set() in cpp condition
1686 - remove the ASMI configuration for DK1S10_standard_32 (never present)
1687 - fix some typed in mistakes in the NIOS documentation
1688 2: - split DK1C20 configuration into several header files:
1689 o two new files for each NIOS CPU description
1690 o U-Boot related part is remaining in DK1C20.h
1691 3: - split DK1S10 configuration into several header files:
1692 o two new files for each NIOS CPU description
1693 o U-Boot related part is remaining in DK1S10.h
1694 4: - Add support for the Microtronix Linux Development Kit
1695 NIOS CPU configuration at the Altera Nios Development Kit,
1696 Stratix Edition (DK-1S10)
1697 5: - Add documentation for the Altera Nios Development Kit,
1698 Stratix Edition (DK-1S10)
1699 6: - Add support for the Nios Serial Peripharel Interface (SPI)
1700 (master only)
1701 7: - Add support for the common U-Boot SPI framework at
1702 RTC driver DS1306
1703
wdenkb98fff12004-02-09 20:51:26 +00001704* Patch by Rahul Shanbhag, 28 Jan 2004:
1705 Fix flash protection/locking handling for OMAP1610 innovator board.
1706
1707* Patch by Rolf Peukert, 28 Jan 2004:
1708 fix flash write problems on CSB226 board (write with 32 bit bus width)
1709
1710* Patches by Mark Jonas, 16 Jan 2004:
1711 - fix rounding error when calculating baudrates for MPC5200 PSCs
1712 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
1713 time which is not supported
1714
wdenk5653fc32004-02-08 22:55:38 +00001715* Patch by Yuli Barcohen, 26 Jan 2004:
1716 Allow bzip2 compression for small memory footprint boards
1717
1718* Patch by Brad Kemp, 21 Jan 2004:
1719 Add support for CFI flash driver for both the Intel and the AMD
1720 command sets.
1721
1722* Patch by Travis Sawyer, 20 Jan 2004:
1723 Fix pci bridge auto enumeration of sibling p2p bridges.
1724
1725* Patch by Tolunay Orkun, 12 Jan 2004:
1726 Add some delays as needed for Intel LXT971A PHY support
1727
1728* Patches by Stephan Linz, 09 Jan 2004:
1729 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
1730 - make DK1C20 board configuration related to ASMI conform to
1731 documentation
1732
wdenkf6e20fc2004-02-08 19:38:38 +00001733* Patch by Anders Larsen, 09 Jan 2004:
1734
1735 ARM memory layout fixes: the abort-stack is now set up in the
1736 correct RAM area, and the BSS is zeroed out as it should be.
1737
1738 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
1739 of the linker scripts are replaced by '__bss_start' and '_end',
1740 resp., which is a further step to eliminate unnecessary differences
1741 between the implementation of the CPU architectures.
1742
wdenkf4863a72004-02-07 01:27:10 +00001743* Patch by liang a lei, 9 Jan 2004:
1744 Fix Intel 28F128J3 ID in include/flash.h
1745
1746* Patch by Masami Komiya, 09 Jan 2004:
1747 add support for TB0229 board (NEC VR4131 MIPS processor)
1748
1749* Patch by Leon Kukovec, 12 Dec 2003:
1750 changed extern __inline__ into static __inline__ in
1751 include/linux/byteorder/swab.h
1752
wdenkba56f622004-02-06 23:19:44 +00001753* Patch by Travis Sawyer, 30 Dec 2003:
1754 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
1755 select MDI port based on enabled EMAC device.
1756 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
1757 base PrPMC board.
1758
wdenka6cccae2004-02-06 21:48:22 +00001759* Patch by Wolter Kamphuis, 15 Dec 2003:
1760 made CONFIG_SILENT_CONSOLE usable on all architectures
1761
1762* Disable date command on TQM866M - there is no RTC on MPC866
1763
wdenk75d1ea72004-01-31 20:06:54 +00001764* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
1765
wdenk68766092004-01-29 09:22:58 +00001766* Implement adaptive SDRAM timing configuration based on actual CPU
1767 clock frequency for INCA-IP; fix problem with board hanging when
1768 switching from 150MHz to 100MHz
1769
1770* Add PCMCIA CS support for BMS2003 board
1771
wdenkc178d3d2004-01-24 20:25:54 +00001772* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
1773 see doc/README.MPC866 for details;
1774 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
1775 calculate CPU clock frequency from PLL register values.
1776
1777* Add support for 128 MB RAM on TQM8xxL/M modules
1778
wdenkef978732004-01-21 20:46:28 +00001779* Fix PS/2 keyboard problem caused by statically initialized variable
1780 pointing to a location in flash
1781
1782* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
1783
wdenkc837dcb2004-01-20 23:12:12 +00001784* The PS/2 mux on the BMS2003 board needs 450 ms after power on
1785 before we can access it; add delay in case we are faster (with no
1786 CF card inserted)
1787
1788* Cleanup of some init functions
1789
1790* Make sure SCC Ethernet is always stopped by the time we boot Linux
1791 to avoid Linux crashes by early packets coming in.
1792
1793* Accelerate flash accesses on LWMON board by using buffered writes
1794
wdenkb0aef112004-01-18 18:21:54 +00001795* Fix typo in Makefile;
1796 fix problem with PARTNUM detection
1797
wdenk1c437712004-01-16 00:30:56 +00001798* Patch by Reinhard Meyer, 09 Jan 2004:
1799 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
1800
1801* Add support for IDE LED on BMS2003 board
1802 (exclusive with status LED!)
1803
1804* Add support for PS/2 keyboard (used with PS/2 multiplexor on
1805 BMS2003 board)
1806
1807* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
1808 Add common files for "emk" boards
1809
wdenkc83bf6a2004-01-06 22:38:14 +00001810* Add a common get_ram_size() function and modify the the
1811 board-specific files to invoke that common implementation.
1812
1813======================================================================
wdenkb34ff812004-01-06 11:13:56 +00001814Changes for U-Boot 1.0.1:
wdenk5cf9da42003-11-07 13:42:26 +00001815======================================================================
1816
wdenkb34ff812004-01-06 11:13:56 +00001817* Set default clock for INCA-IP to 150 MHz
1818
wdenka522fa02004-01-04 22:51:12 +00001819* Make BMS2003 use a separate config file to avoid #ifdef mess;
1820 add I2C support; add support for DS1337 RTC
1821
1822* Add CompactFlash support for BMS2003 board
1823
1824* Add support for status LED on BMS2003 board
1825
wdenk180d3f72004-01-04 16:28:35 +00001826* Patch by Scott McNutt, 02 Jan 2004:
1827 Add support for the Nios Active Serial Memory Interface (ASMI)
1828 on Cyclone devices
1829
1830* Patch by Andrea Marson, 16 Dec 2003:
1831 Add support for the PPChameleon ME and HI modules
1832
1833* Patch by Yuli Barcohen, 22 Dec 2003:
1834 Add support for Motorola DUET ADS board (MPC87x/88x)
1835
wdenkdd875c72004-01-03 21:24:46 +00001836* Patch by Robert Schwebel, 15 Dec 2003:
1837 add support for cramfs (uses JFFS2 command interface)
1838
wdenkc935d3b2004-01-03 19:43:48 +00001839* Patches by Stephan Linz, 11 Dec 2003:
1840 - more documentation for NIOS port
1841 - new struct nios_pio_t, struct nios_spi_t
1842 - Reconfiguration for NIOS Development Kit DK1C20:
1843 o move board related code from board/dk1c20
1844 to board/altera/dk1c20
1845 o create a new common source path board/altera/common
1846 and move generic flash access stuff into it
1847 o change/expand configuration file DK1C20.h
1848 - Add support for NIOS Development Kit DK1S10
1849 - Add status LED support for NIOS systems
1850 - Add dual 7-segment LED support for Altera NIOS DevKits
1851
wdenk3a473b22004-01-03 00:43:19 +00001852* Patch by Ronen Shitrit, 10 Dec 2003:
1853 Add support for the Marvell DB64360 / DB64460 development boards
1854
1855* Patch by Detlev Zundel, 10 Dec 2003:
1856 fix dependency problem in examples/Makefile
1857
wdenkb6e4c402004-01-02 16:05:07 +00001858* Patch by Denis Peter, 8 Dec 2003
1859 - add support for the PATI board (MPC555)
1860 - add SPI support for the MPC5xx
1861
1862* Patch by Anders Larsen, 08 Dec 2003:
1863 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
1864 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
1865 cleanup some redundand #defines
1866
wdenk63f34912004-01-02 15:01:32 +00001867* Patch by André Schwarz, 8 Dec 2003:
1868 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
1869 - TX and RX deskriptors must be quad-word aligned
1870 - does not work with only one TX deskriptor
1871 - standard reset method does not work
1872
1873* Patch by Masami Komiya, 08 Dec 2003:
1874 add RTL8139 ethernet driver
1875
1876* Patches by Ed Okerson, 07 Dec 2003:
1877 - fix ethernet for the AU1x00 processors in little-endian mode.
1878 - extend memsetup.S for the AU1x00 processors in BE and LE modes
1879
wdenkd4ca31c2004-01-02 14:00:00 +00001880* Minor code cleanup (coding style)
1881
1882* Patch by Reinhard Meyer, 30 Dec 2003:
1883 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
1884 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
1885 - turned debug print of PHY registers into a function (called in two places)
1886 - added support for EMK MPC5200 based modules
1887
1888* Fix MPC8xx PLPRCR_MFD_SHIFT typo
1889
1890* Add support for TQM866M modules
1891
1892* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
1893
1894* Fix a few compiler warnings
1895
wdenkc1896002003-12-28 11:44:59 +00001896* Patch by Reinhard Meyer, 28 Dec 2003:
1897 Add initial support for TOP5200 board
1898
wdenk7cb22f92003-12-27 19:24:54 +00001899* Make CPU clock on ICA-IP board controllable by a "cpuclk"
1900 environment variable which can set to "100", "133", or "150". The
1901 CPU clock will be configured accordingly upon next reboot. Other
1902 values are ignored. In case of an invalid or undefined "cpuclk"
1903 value, the compile-time default CPU clock speed will be used.
1904
1905* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
1906 window that is used to access the UART registers by the Linux driver)
1907
1908* Patch by Reinhard Meyer, 20 Dec 2003:
1909 Fix clock calculation for the MPC5200 for higher clock frequencies
1910 (above 2**32 / 10 = 429.5 MHz).
1911
1912* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
1913
wdenkb2001f22003-12-20 22:45:10 +00001914* Fix IceCube CLKIN configuration (it's 33.000000MHz)
1915
1916* Add new configuration for IceCube board with DDR memory
1917
1918* Update TRAB memory configurations
1919
wdenk5c745d22003-12-12 00:02:26 +00001920* Add JFFS2 support for INCA-IP board
1921
stroesed4f58f72003-12-09 15:04:55 +00001922* Patch by Bill Hargen, 09 Dec 2003:
1923 - BUBINGA405EP: changed flash driver to protect top sector containing
1924 first instruction.
1925 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
1926 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
1927 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
1928 - 405EP: added/fixed support for "reginfo" command.
1929 - 4xx: removed spurious MII error messages on "mii info" command.
1930
wdenk4e5ca3e2003-12-08 01:34:36 +00001931* Patch by Bernhard Kuhn, 28 Nov 2003:
1932 add support for Coldfire CPU
1933 add support for Motorola M5272C3 and M5282EVB boards
1934
wdenk9fd5e312003-12-07 23:55:12 +00001935* Patch by Pierre Aubert, 24 Nov 2003:
1936 - add a return value for the fpga command
1937 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
1938 is defined. If ide_preinit fails, ide_init is aborted.
1939 - fix an endianess problem in fat.h
1940
wdenk3bbc8992003-12-07 22:27:15 +00001941* Patch by Wolter Kamphuis, 05 Dec 2003:
1942 Add support for SNMC's QS850/QS823/QS860T boards
1943
wdenkb028f712003-12-07 21:39:28 +00001944* Patch by Yuli Barcohen, 3 Dec 2003:
1945 "revive" U-Boot support for old Motorola MPC860ADS board
1946
1947* Patch by Cam(ilo?), 03 Dec 2003:
1948 make examples build even with broken Montavista objcopy
1949
1950* Patch by Pavel Bartusek, 27 Nov 2003:
1951 fix conversion problem with "bootretry" evironment variable
1952
wdenkb4676a22003-12-07 19:24:00 +00001953* Patch by Andre Schwarz, 24 Nov 2003:
1954 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
1955
1956* Patch by Pavel Bartusek, 21 Nov 2003:
1957 set ZMII bridge speed on 440
1958
1959* Patch by Anders Larsen, 17 Nov 2003:
1960 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
1961
wdenka2663ea2003-12-07 18:32:37 +00001962* Patches by David Müller, 14 Nov 2003:
1963 - board/mpl/common/common_util.c
1964 * implement support for BZIP2 compressed images
1965 * various cleanups (printf -> puts, ...)
1966 - board/mpl/common/flash.c
1967 * report correct errors to upper layers
1968 * check the erase fail and VPP low bits in status reg
1969 - board/mpl/vcma9/cmd_vcma9.c
1970 - board/mpl/vcma9/flash.c
1971 * various cleanups (printf -> puts, ...)
1972 - common/cmd_usb.c
1973 * fix typo in comment
1974 - cpu/arm920t/usb_ohci.c
1975 * support for S3C2410 is missing in #if line
1976 - drivers/cs8900.c
1977 * reinit some registers in case of error (cable missing, ...)
1978 - fs/fat/fat.c
1979 * support for USB/MMC devices is missing in #if line
1980 - include/configs/MIP405.h
1981 - include/configs/PIP405.h
1982 * enable BZIP2 support
1983 * enlarge malloc space to 1MiB because of BZIP2 support
1984 - include/configs/VCMA9.h
1985 * enable BZIP2 support
1986 * enlarge malloc space to 1MiB because of BZIP2 support
1987 * enable USB support
1988 - lib_arm/armlinux.c
1989 * change calling convention of ARM Linux kernel as
1990 described on http://www.arm.linux.org.uk/developer/booting.php
1991
1992* Patch by Thomas Lange, 14 Nov 2003:
1993 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
1994 support all these AMD boards.
1995
1996* Patch by Thomas Lange, 14 Nov 2003:
1997 Workaround for mips au1x00 physical memory accesses (the au1x00
1998 uses a 36 bit bus internally and cannot access physical memory
1999 directly. Use the uncached SDRAM address instead of the physical
2000 one.)
2001
wdenkef5a9672003-12-07 00:46:27 +00002002* Patch by Xue Ligong (Joe), 13 Nov 2003:
2003 add Realtek 8019 ethernet driver
2004
2005* Patch by Yuli Barcohen, 13 Nov 2003:
2006 MPC826xADS/PQ2FADS cleanup
2007
2008* Patch by Anders Larsen, 12 Nov 2003:
2009 Update README to mark the PORTIO commands non-standard
2010
wdenk5779d8d2003-12-06 23:55:10 +00002011* Patch by Nicolas Lacressonnière, 12 Nov 2003:
2012 update for for Atmel AT91RM9200DK development kit:
2013 - support for environment variables in DataFlash
2014 - Atmel DataFlash AT45DB1282 support
2015
2016* Patch by Jeff Carr, 11 Nov 2003:
2017 add support for new version of 8270 processors
2018
2019* Patches by George G. Davis, 05 Nov 2003:
2020 - only pass the ARM linux initrd tag to the kernel when an initrd
2021 is actually present
2022 - update omap1510inn configuration file
2023
wdenk8bf3b002003-12-06 23:20:41 +00002024* Patches by Stephan Linz, 3 Nov 2003:
2025 - more endianess fixes for LAN91C111 driver
2026 - CFG_HZ configuration patch for NIOS Cyclone board
2027
2028* Patch by Stephan Linz, 28 Oct 2003:
2029 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
2030
2031* Patch by Steven Scholz, 20 Oct 2003:
2032 - make "mii info <addr>" show infor for PHY at "addr" only
2033 - Endian fix for miiphy_info()
2034
wdenka8c7c702003-12-06 19:49:23 +00002035* Patch by Gleb Natapov, 19 Sep 2003:
2036 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
2037
2038* Patch by Anders Larsen, 17 Sep 2003:
2039 Bring ARM memory layout in sync with the documentation:
2040 stack and malloc-heap are now located _below_ the U-Boot code
2041
wdenkfa1399e2003-12-06 11:20:01 +00002042* Accelerate booting on TRAB board: read and check autoupdate image
2043 headers first instead of always reading the whole images.
2044
wdenkb96619a2003-12-05 21:08:38 +00002045* Fix type in MPC5XXX code (pointed out by Victor Wren)
2046
wdenkaf6d1df2003-12-03 23:53:42 +00002047* Enabled password check on RMU board
2048
2049* Fix configuration problem with IceCube in LOWBOOT configuration:
2050 envrionment got embedded, corrupting the image layout.
2051
2052* Fix NEC display names (it's 6440 [for 640x480], not 6640).
2053
wdenkfd3103b2003-11-25 16:55:19 +00002054* Added BMS2003 board
2055 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
2056
wdenkb4757ce2003-11-17 21:45:27 +00002057* Fix flash driver for TRAB board (must use Unlock Bypass Reset
2058 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
2059 and CPLD
2060
wdenk5bb226e2003-11-17 21:14:37 +00002061* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
2062 recent tools
2063
2064* Add checksum verification to 'imls' command
2065
2066* Add bd_info fields needed for 4xx Linux I2C driver
2067
2068* Patch by Martin Krause, 4 Nov. 2003:
2069 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
2070
2071* Print used network interface when CONFIG_NET_MULTI is set
2072
wdenk5cf9da42003-11-07 13:42:26 +00002073* Patch by Bernhard Kuhn, 28 Oct 2003:
2074 Add low boot support for MPC5200
2075
2076* Fix problem with dual PCMCIA support (NSCU)
2077
2078* Fix MPC5200 I2C initialization function
2079
2080======================================================================
wdenka43278a2003-09-11 19:48:06 +00002081Changes for U-Boot 1.0.0:
2082======================================================================
2083
wdenkb13fb012003-10-30 21:49:38 +00002084* Fix parameter passing to standalone images with bootm command
2085
2086* Patch by Kyle Harris, 30 Oct 2003:
2087 Fix build errors for ixdp425 board
2088
2089* Patch by David M. Horn, 29 Oct 2003:
2090 Fixes to build under CYGWIN
2091
2092* Get IceCube MGT5100 working (again)
2093
wdenk5fa66df2003-10-29 23:18:55 +00002094* Fix problems in memory test on some boards (which was not
2095 non-destructive as intended)
2096
2097* Patch by Gary Jennejohn, 28 Oct 2003:
2098 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
2099 to prevent stack overflow on ARM systems
2100
wdenka0f2fe52003-10-28 09:14:21 +00002101* Patch by Stephan Linz, 28 Oct 2003:
2102 fix init sequence error for NIOS port
2103
2104* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
2105
2106* Add CONFIG_VERSION_VARIABLE to TRAB configuration
2107
wdenka57a4962003-10-26 22:52:58 +00002108* Patch by Xiao Xianghua, 23 Oct 2003:
2109 small patch for mpc85xx
2110
2111* Fix small problem in MPC5200 I2C driver
2112
2113* Fix FCC3 support on ATC board
2114
dzu8cb81432003-10-24 13:14:45 +00002115* Correct header printing for multi-image files in do_bootm()
2116
2117* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
2118
wdenk4654af22003-10-22 09:00:28 +00002119* Fix PCI problems on PPChameleon board
2120
wdenka3ad8e22003-10-19 23:22:11 +00002121* Patch by Steven Scholz, 18 Oct 2003:
2122 Fix AT91RM9200 ethernet driver
2123
2124* Patch by Nye Liu, 17 Oct 2003:
2125 Fix typo in include/mpc8xx.h
2126
2127* Patch by Richard Woodruff, 16 Oct 03:
2128 Fixes for cpu/arm925/interrupt.c
2129 - Initialize timestamp & lastdec vars.
2130 - fix timestamp overflows.
2131 - fix lastdec overflow.
2132 - smarter normalization to allow udelay() below 1ms to work.
2133
2134* Patch by Scott McNutt, 16 Oct
2135 add networking support for the Altera Nios Development Kit,
2136 Cyclone Edition (DK-1C20)
2137
2138* Patch by Jon Diekema, 14 Oct 2003:
2139 add hint about doc/README.silent to README file
2140
dzue7df0292003-10-19 21:43:26 +00002141* Add CompactFlash support for NSCU
2142
wdenkd7281f42003-10-19 22:30:08 +00002143* Fix PCI problems on PPChameleonEVB
2144
wdenk3d1e8a92003-10-16 12:53:35 +00002145* TRAB auto-update: Base decision if we have to strip the image
2146 header on image type as encoded in the header
wdenkd7281f42003-10-19 22:30:08 +00002147 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk3d1e8a92003-10-16 12:53:35 +00002148
wdenk42d1f032003-10-15 23:53:47 +00002149* Patches by Xianghua Xiao, 15 Oct 2003:
2150
2151 - Added Motorola CPU 8540/8560 support (cpu/85xx)
2152 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
2153 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
2154
2155* Fix flash timings on TRAB board
2156
wdenk2d5b5612003-10-14 19:43:55 +00002157* Make sure HUSH is initialized for running auto-update scripts
2158
2159* Make 5200 reset command _really_ reset the board, without running
2160 any other code after it
2161
2162* Fix errors with flash erase when range spans across banks
2163 that are mapped in reverse order
2164
2165* Fix flash mapping and display on P3G4 board
2166
2167* Patch by Kyle Harris, 15 Jul 2003:
2168 - add support for Intel IXP425 CPU
2169 - add support for IXDP425 eval board
2170
wdenkf72da342003-10-10 10:05:42 +00002171* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
2172 for more information
2173
wdenk5da627a2003-10-09 20:09:04 +00002174* Patch by Steven Scholz, 10 Oct 2003
2175 - Add support for Altera FPGA ACEX1K
2176
wdenk15647dc2003-10-09 19:00:25 +00002177* Patches by Thomas Lange, 09 Oct 2003:
2178 - fix cmd_ide.c for non ppc boards (read/write functions did not
2179 add ATA base address)
2180 - fix for shannon board
2181 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk5da627a2003-10-09 20:09:04 +00002182 - Endian swap ATA identity for all big endian CPUs, not just PPC
2183 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
2184 args to linux
2185 - add support for dbau1x00 board (MIPS32)
wdenk15647dc2003-10-09 19:00:25 +00002186
2187* Patch by Sangmoon Kim, 07 Oct 2003:
2188 add support for debris board
2189
wdenka0ff7f22003-10-09 13:16:55 +00002190* Patch by Martin Krause, 09 Oct 2003:
2191 Fixes for TRAB board
2192 - /board/trab/rs485.c: correct baudrate
wdenk42d1f032003-10-15 23:53:47 +00002193 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenka0ff7f22003-10-09 13:16:55 +00002194 udelay(); fix some timing problems with adc controller
2195 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
2196 modify commands: touch and buzzer
2197
2198* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
2199 (quick & dirty workaround for rogue pointer problem in get_vfatname());
2200 Use direct function calls for auto_update instead of hush commands
2201
wdenk4a551702003-10-08 23:26:14 +00002202* Patch by Scott McNutt, 04 Oct 2003:
2203 - add support for Altera Nios-32 CPU
2204 - add support for Nios Cyclone Development Kit (DK-1C20)
2205
2206* Patch by Steven Scholz, 29 Sep 2003:
2207 - A second parameter for bootm overwrites the load address for
2208 "Standalone Application" images.
2209 - bootm sets environment variable "filesize" to the resulting
2210 (uncompressed) data length for "Standalone Application" images
2211 when autostart is set to "no". Now you can do something like
2212 if bootm $fpgadata $some_free_ram ; then
2213 fpga load 0 $some_free_ram $filesize
2214 fi
2215
2216* Patch by Denis Peter, 25 Sept 2003:
2217 add support for the MIP405 Rev. C board
2218
wdenk54387ac2003-10-08 22:45:44 +00002219* Patch by Yuli Barcohen, 25 Sep 2003:
2220 add support for Zephyr Engineering ZPC.1900 board
2221
2222* Patch by Anders Larsen, 23 Sep 2003:
2223 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
2224 implemented for the x86 architecture)
2225
wdenkfc3e2162003-10-08 22:33:00 +00002226* Patch by Sangmoon Kim, 23 Sep 2003:
2227 fix pll_pci_to_mem_multiplier table for MPC8245
2228
2229* Patch by Anders Larsen, 22 Sep 2003:
2230 enable timed autoboot on PXA
2231
2232* Patch by David Müller, 22 Sep 2003:
wdenkfc3e2162003-10-08 22:33:00 +00002233 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
2234 returns correct libgcc file path
2235 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
2236 time on s3c24x0 systems
2237
2238* Patch by Jon Diekema, 19 Sep 2003:
2239 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
2240 link state to the fault LED.
2241 - In NetLoop, make the Fault LED reflect the link status. The link
2242 status gets updated on entry, and on timeouts.
wdenk42d1f032003-10-15 23:53:47 +00002243
wdenkef1464c2003-10-08 22:14:02 +00002244* Patch by Anders Larsen, 18 Sep 2003:
2245 allow mkimage to build and run on Cygwin-hosted systems
2246
2247* Patch by Frank Müller, 18 Sep 2003:
2248 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
2249 cpu/mpc8xx/fec.c
2250
2251* Patch by Pantelis Antoniou, 16 Sep 2003:
2252 add tool to compute fileds in the PLPRCR register for MPC86x
2253
wdenkd9a405a2003-10-07 20:01:55 +00002254* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
2255
wdenk147031a2003-10-07 10:33:38 +00002256* Fix build problems under FreeBSD
2257
wdenk887b3722003-10-06 22:00:45 +00002258* Add generic filesystem image type
2259
wdenkfbe4b5c2003-10-06 21:55:32 +00002260* Make fatload set filesize environment variable
2261
2262* enable basic / medium / high-end configurations for PPChameleonEVB
2263 board; fix NAND code
2264
2265* enable TFTP client code to specify to the server the desired
2266 timeout value (see RFC-2349)
2267
dzubb65a312003-09-30 15:22:12 +00002268* Improve SDRAM setup for TRAB board
2269
dzu88a1bfa2003-09-30 15:11:43 +00002270* Suppress all output with splashscreen configured only if "splashimage"
2271 is set
2272
dzucad07372003-09-30 14:36:51 +00002273* Fix problems with I2C support for mpc5200
2274
dzu8a42eac2003-09-29 21:55:54 +00002275* Adapt TRAB configuration and auto_update to new memory layout
2276
dzu91e940d2003-09-25 22:32:40 +00002277* Add configuration for wtk board
2278
dzu29127b62003-09-25 22:30:12 +00002279* Add support for the Sharp LQ065T9DR51U LCD display
2280
wdenk206c60c2003-09-18 10:02:25 +00002281* Patch by Rune Torgersen, 17 Sep 2003:
2282 - Fixes for MPC8266 default config
wdenk65bd0e22003-09-18 10:45:21 +00002283 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk206c60c2003-09-18 10:02:25 +00002284
2285* Patches by Jon Diekema, 17 Sep 2003:
2286 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
2287 env_common.c)
2288 - sbc8260 tweaks
2289 - adjust "help" output
2290
wdenk5f535fe2003-09-18 09:21:33 +00002291* Patches by Anders Larsen, 17 Sep 2003:
2292 - fix spelling errors
2293 - set GD_FLG_DEVINIT flag only after device function pointers
2294 are valid
2295 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
2296 writeable
2297 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
2298 - trigger watchdog while waiting in serial driver
2299
wdenkb0639ca2003-09-17 22:48:07 +00002300* Add auto-update code for TRAB board using USB memory sticks,
2301 support new configuration with more memory
wdenkf54ebdf2003-09-17 15:10:32 +00002302
wdenkef709e92003-09-16 17:35:37 +00002303* disable MPC5200 bus pipelining as workaround for bus contention
2304
wdenk4aeb2512003-09-16 17:06:05 +00002305* Modify XLB arbiter priorities on MPC5200 so all devices use same
2306 priority; configure critical interrupts to be handled like external
2307 interrupts
2308
wdenkacf98e72003-09-16 11:39:10 +00002309* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
2310 go back to 66 MHz for stability
2311
wdenk78137c32003-09-15 18:00:00 +00002312* Patches by Jon Diekema, 15 Sep 2003:
2313 - add description for missing CFG_CMD_* entries in the README file
2314 - sacsng tweaks
2315
wdenk35656de2003-09-14 19:08:39 +00002316* Patch by Gleb Natapov, 14 Sep 2003:
2317 enable watchdog support for all MPC824x boards that have a watchdog
2318
2319* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
2320 "Non-octet Aligned Frame" errors we see at 100 Mbps
2321
2322* Patch by Sharad Gupta, 14 Sep 2003:
2323 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
2324
wdenk200f8c72003-09-13 19:13:29 +00002325* Patch by llandre, 11 Sep 2003:
2326 update configuration for PPChameleonEVB board
2327
wdenk531716e2003-09-13 19:01:12 +00002328* Patch by David Müller, 13 Sep 2003:
2329 various changes to VCMA9 board specific files
2330
2331* Add I2C support for MGT5100 / MPC5200
2332
wdenkb70e7a02003-09-12 20:09:09 +00002333* Patch by Rune Torgersen, 11 Sep 2003:
2334 Changed default memory option on MPC8266ADS to NOT be Page Based
2335 Interleave, since this doesn't work very well with the standard
2336 16MB DIMM
2337
2338* Patch by George G. Davis, 12 Sep 2003:
2339 fix Makefile settings for sk98 driver
2340
stroese68ce8952003-09-12 08:57:52 +00002341* Patch by Stefan Roese, 12 Sep 2003:
2342 - new boards added: DP405, HUB405, PLU405, VOH405
2343 - some esd boards updated
2344 - cpu/ppc4xx/sdram.c: disable memory controller before setting
2345 first values
2346 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
2347
wdenk4f7cb082003-09-11 23:06:34 +00002348* Patch by Martin Krause, 11 Sep 2003:
2349 add burn-in tests for TRAB board
2350
2351* Enable instruction cache on MPC5200 board
2352
wdenka43278a2003-09-11 19:48:06 +00002353* Patch by Denis Peter, 11 Sep 2003:
2354 - fix USB data pointer assignment for bulk only transfer.
2355 - prevent to display erased directories in FAT filesystem.
2356
2357* Change output format for NAND flash - make it look like for other
2358 memory, too
2359
2360======================================================================
wdenk149dded2003-09-10 18:20:28 +00002361Changes for U-Boot 0.4.8:
wdenkd94f92c2003-08-28 09:41:22 +00002362======================================================================
2363
dzu29127b62003-09-25 22:30:12 +00002364* Add I2C and RTC support for RMU board
2365
wdenk7205e402003-09-10 22:30:53 +00002366* Patches by Denis Peter, 9 Sep 2003:
2367 add FAT support for IDE, SCSI and USB
2368
2369* Patches by Gleb Natapov, 2 Sep 2003:
2370 - cleanup of POST code for unsupported architectures
2371 - MPC824x locks way0 of data cache for use as initial RAM;
2372 this patch unlocks it after relocation to RAM and invalidates
2373 the locked entries.
2374
2375* Patch by Gleb Natapov, 30 Aug 2003:
2376 new I2C driver for mpc107 bridge. Now works from flash.
2377
2378* Patch by Dave Ellis, 11 Aug 2003:
2379 - JFFS2: fix typo in common/cmd_jffs2.c
2380 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
2381 - JFFS2: remove node version 0 warning
2382 - JFFS2: accept JFFS2 PADDING nodes
2383 - SXNI855T: add AM29LV800 support
2384 - SXNI855T: move environment from EEPROM to flash
2385 - SXNI855T: boot from JFFS2 in NOR or NAND flash
2386
2387* Patch by Bill Hargen, 11 Aug 2003:
2388 fixes for I2C on MPC8240
2389 - fix i2c_write routine
2390 - fix iprobe command
2391 - eliminates use of global variables, plus dead code, cleanup.
2392
wdenk149dded2003-09-10 18:20:28 +00002393* Add support for USB Mass Storage Devices (BBB)
2394 (tested with USB memory sticks only)
2395
2396* Avoid flicker on TRAB's VFD
2397
wdenk7152b1d2003-09-05 23:19:14 +00002398* Add support for SK98xx driver
2399
2400* Add PCI support for SL8245 board
2401
2402* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
2403 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
2404 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
2405
2406* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
2407 to allow for more accurate baudrate settings
2408 (error now 0.7% at 115 kbps, instead of 3.5% before)
2409
2410* Patch by Andreas Mohr, 4 Sep 2003:
2411 Fix a lot of spelling errors
2412
wdenk12f34242003-09-02 22:48:03 +00002413* Add support for PPChameleon Eval Board
2414
2415* Add support for P3G4 board
2416
2417* Fix problem with MGT5100 FEC driver: add "early" MAC address
2418 initialization
2419
wdenk326428c2003-08-31 18:37:54 +00002420* Patch by Yuli Barcohen, 7 Aug 2003:
2421 check BCSR to detect if the board is configured in PCI mode
2422
wdenk149dded2003-09-10 18:20:28 +00002423======================================================================
2424Changes for U-Boot 0.4.7:
2425======================================================================
2426
wdenk0cb61d72003-08-30 00:05:50 +00002427* Patch by Raghu Krishnaprasad, 7 Aug 2003:
2428 add support for Adder II MPC852T module
2429
wdenk6f213472003-08-29 22:00:43 +00002430* Patch by George G. Davis, 19 Aug 2003:
2431 fix TI Innovator/OMAP1510 pin configs
2432
2433* Patches by Kshitij, 18 Aug 2003
2434 - add support for arm926ejs cpu core
2435 - add support for TI OMAP 1610 Innovator Board
2436
wdenkc29fdfc2003-08-29 20:57:53 +00002437* Patch by Yuli Barcohen, 14 Aug 2003:
2438 add support for bzip2 uncompression
2439
2440* Add GCC library to examples/Makefile so GCC utility functions will
2441 be resolved, too
2442
wdenkca75add2003-08-29 10:05:53 +00002443* Add I2C and RTC support for RMU board using software I2C driver
2444 (because of better response to iprobe command); fix problem with
2445 "reset" command
2446
stroese437ce072003-08-28 14:24:37 +00002447* Patch by Matthias Fuchs, 28 Aug 2003:
2448 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
2449 CONFIG_BOOTP_MAKS (see README).
2450
wdenkd94f92c2003-08-28 09:41:22 +00002451* Fix ICU862 environment problem
2452
2453* Fix RAM size detection for RMU board
2454
2455* Implement "reset" for MGT5100/MPC5200 systems
2456
2457======================================================================
2458Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +00002459======================================================================
2460
wdenke0ac62d2003-08-17 18:55:18 +00002461* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
2462 allow selection of clock frequency as "make" target
2463
2464* Implement memory autosizing code for IceCube boards
2465
2466* Configure network port on INCA-IP for autonegotiation
2467
2468* Fix overflow problem in network timeout code
2469
2470* Patch by Richard Woodruff, 8 Aug 2003:
2471 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
2472
wdenkd94f92c2003-08-28 09:41:22 +00002473======================================================================
2474Changes for U-Boot 0.4.5:
2475======================================================================
2476
wdenkae3af052003-08-07 22:18:11 +00002477* Update for TQM board defaults:
2478 disable clocks_in_mhz, enable boot count limit
2479
dzu9374fa22003-08-07 15:04:48 +00002480* Removed tools/gdb from "make all" target. Added make target "gdbtools"
2481 in toplevel directory instead. Removed astest.c from tools/gdb because
2482 it is no longer relevant.
2483
wdenk96e48cf2003-08-05 18:22:44 +00002484* Fix PCI support for MPC5200 / IceCube Board
2485
wdenkbdccc4f2003-08-05 17:43:17 +00002486* Map ISP1362 USB OTG controller for NSCU board
2487
2488* Patch by Brad Parker, 02 Aug 2003:
2489 fix sc520_cdp problems
2490
2491* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
2492
2493* Allow erase command to cross flash bank boundaries
2494
wdenk1f4bb372003-07-27 00:21:01 +00002495* Patch by Scott McNutt, 21 Jul 2003:
2496 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
2497 Both LynxOS and BlueCat linux KDIs are supported.
2498
2499* Patch by Richard Woodruff, 25 Jul 2003:
2500 use more reliable reset for OMAP/925T
2501
2502* Patch by Nye Liu, 25 Jul 2003:
2503 fix typo in mpc8xx.h
2504
2505* Patch by Richard Woodruff, 24 Jul 2003:
2506 Fixes for cmd_nand.c:
2507 - Fixed null dereferece which could result in incorrect ECC values.
2508 - Added support for devices with no Ready/Busy signal hooked up.
2509 - Added OMAP1510 read/write protect handling.
2510 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
2511 for non-JFFS2.
2512 - Switched default ECC to be JFFS2.
2513
wdenk77846742003-07-26 08:08:08 +00002514* Allow crc32 to be used at address 0x000
2515
2516* Provide consistent interface to standalone applications to access
2517 the 'global_data' structure
2518 Provide a doc/README.standalone more useful to users/developers.
2519
2520* Make IceCube MGT5100 FEC driver work
2521
wdenk27b207f2003-07-24 23:38:38 +00002522* Implement new mechanism to export U-Boot's functions to standalone
2523 applications: instead of using (PPC-specific) system calls we now
2524 use a jump table; please see doc/README.standalone for details
2525
2526* Patch by Dave Westwood, 24 Jul 2003:
2527 added support for Unity OS (a proprietary OS)
2528
2529* Patch by Detlev Zundel, 23 Jul 2003:
2530 add "imls" command to print flash table of contents
2531
2532* Fix cold boot detection for log buffer reset
2533
2534* Return error for invalid length specifiers with "cp.X" etc.
2535
2536* Fix startup problem on MIPS
2537
2538* Allow for CONFIG_SPLASH_SCREEN even when no explicit
2539 bitmap support is configured
2540
2541* Patch by Bill Hargen, 18 Jul 2003:
2542 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
2543
2544* Patch by Denis Peter, 18 Jul 2003:
2545 - fix memory configuration for MIP405T
2546 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
2547
2548* Cleanup of TQM82xx configurations; use "official" board types
2549 to make selection easier.
2550
wdenk2535d602003-07-17 23:16:40 +00002551* Patch by Martin Krause, 17 Jul 2003:
2552 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
2553
2554* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +00002555 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +00002556
2557* Patch by Nye Liu, 16 July 2003:
2558 MPC860FADS fixes:
2559 - add MPC86xADS support (uses MPC86xADS.h)
2560 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
2561 o PLPRCR changes
2562 o BRG changes (EXTAL/XTAL restricted to 10MHz)
2563 o don't trust gclk() software measurement by default, depend on
2564 CONFIG_8xx_GCLK_FREQ
2565 - add DRAM SIMM not installed detection
2566 - use more "correct" SDRAM initialization sequence
2567 - allow different SDRAM sizes (8xxADS has 8M)
2568 - default DER is 0
2569 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
2570 - rename MAMR/MBMR defines to be more consistent. Should eventually
2571 be merged into MxMR to better reflect the PowerQUICC datasheet.
2572
2573* Patch by Yuli Barcohen, 16 Jul 2003:
2574 support new Motorola PQ2FADS-ZU evaluation board which replaced
2575 MPC8260ADS and MPC8266ADS
2576
2577======================================================================
wdenk945af8d2003-07-16 21:53:01 +00002578Changes for U-Boot 0.4.4:
2579======================================================================
2580
2581* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
2582
2583* Add support for MGT5100 and MPC5200 processors
2584
2585* Patch by Lutz Dennig, 15 Jul 2003:
2586 update for R360MPI board
2587
2588======================================================================
wdenk8564acf2003-07-14 22:13:32 +00002589Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +00002590======================================================================
2591
wdenk2e5983d2003-07-15 20:04:06 +00002592* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +00002593 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +00002594 - added support for TI OMAP 1510 Innovator Board
2595
wdenk6dff5522003-07-15 07:45:49 +00002596* Patches by Martin Krause, 14 Jul 2003:
2597 - add I2C support for s3c2400 systems (trab board)
2598 - (re-) add "ping" to command table
2599
2600* Fix handling of "slow" POST routines
2601
wdenk8564acf2003-07-14 22:13:32 +00002602* Patches by Yuli Barcohen, 13 Jul 2003:
2603 - Correct flash and JFFS2 support for MPC8260ADS
2604 - fix PVR values and clock generation for PowerQUICC II family
2605 (8270/8275/8280)
2606
2607* Patch by Bernhard Kuhn, 08 Jul 2003:
2608 - add support for M68K targets
2609
2610* Patch by Ken Chou, 3 Jul:
2611 - Fix PCI config table for A3000
2612 - Fix iobase for natsemi.c
2613 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +00002614
wdenk8564acf2003-07-14 22:13:32 +00002615* Allow to enable "slow" POST routines by key press on power-on
2616* Fix temperature dependend switching of LCD backlight on LWMON
2617* Tweak output format for LWMON
2618
stroese57029232003-07-11 08:23:12 +00002619* Patch by Stefan Roese, 11 Jul 2003:
2620 - Fix bug in CONFIG_VERSION_VARIABLE.
2621 - AR405 config updated.
2622 - OCRTC/ORSG: bsp command added.
2623 - ASH405 bsp update.
2624
wdenk8564acf2003-07-14 22:13:32 +00002625======================================================================
2626Changes for U-Boot 0.4.2:
2627======================================================================
2628
wdenkf12e5682003-07-07 20:07:54 +00002629* Add support for NSCU board
2630
2631* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
2632
2633* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
2634 mirror bit flash on TQM8xxM modules
2635
wdenk0d498392003-07-01 21:06:45 +00002636* Patch by Kenneth Johansson, 30 Jun 2003:
2637 get rid of MK_CMD_ENTRY macro; update doc/README.command
2638
wdenkb37c7e52003-06-30 16:24:52 +00002639* Patch by Seb James, 30 Jun 2003:
2640 Improve documentation of I2C configuration in README
2641
2642* Fix problems with previous log buffer "fixes"
2643
2644* Fix minor help text issues
2645
2646* "log append" did not append a newline
2647
2648======================================================================
wdenkb0fce992003-06-29 21:03:46 +00002649Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +00002650======================================================================
2651
wdenkb0fce992003-06-29 21:03:46 +00002652* Fix some missing commands, cleanup header files
2653 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
2654
wdenk9d2b18a2003-06-28 23:11:04 +00002655* Rewrite command lookup and help command (fix problems with bubble
2656 sort when sorting command name list). Minor cleanup here and there.
2657
wdenkd1cbe852003-06-28 17:24:46 +00002658* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
2659 - Allow to call sysmon function interactively
2660 - PIC on LWMON board needs delay after power-on
2661 - Add missing RSR definitions for MPC8xx
2662 - Improve log buffer handling: guarantee clean reset after power-on
wdenk149dded2003-09-10 18:20:28 +00002663 - Add support for EXBITGEN board (aka "genie")
wdenkd1cbe852003-06-28 17:24:46 +00002664 - Add support for SL8245 board
2665
wdenk8bde7f72003-06-27 21:31:46 +00002666* Code cleanup:
2667 - remove trailing white space, trailing empty lines, C++ comments, etc.
2668 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
2669
2670* Patches by Kenneth Johansson, 25 Jun 2003:
2671 - major rework of command structure
2672 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2673
2674======================================================================
2675Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +00002676======================================================================
2677
wdenk993cad92003-06-26 22:04:09 +00002678* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +00002679 - csb226 configuration updated
2680 - credits for logodl port updated
2681 - innokom configuration updated
2682 - logodl tree update, still with coding style inconsistencies
2683 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +00002684
2685* Patch by Pantelis Antoniou, 25 Jun 2003:
2686 update NetVia with V2 board support
2687
wdenkb783eda2003-06-25 22:26:29 +00002688* Header file cleanup for ARM
2689
2690* Patch by Murray Jensen, 24 Jun 2003:
2691 - make sure to use only U-boot provided header files
2692 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
2693
stroesea300d832003-06-24 14:32:24 +00002694* Patch by Stefan Roese, 24 Jun 2003:
2695 - Update esd ASH405 board files.
2696 - Update esd DASA_SIM config file.
2697 - Add ping command to some esd boards.
2698
wdenkcceb8712003-06-23 18:12:28 +00002699* Patch by Yuli Barcohen, 23 Jun 2003:
2700 Update for MPC8260ADS board
2701
2702* Patch by Murray Jensen, 23 Jun 2003:
2703 - cleanup of GCC 3.x compiler warnings
2704
wdenk3595ac42003-06-22 17:18:28 +00002705* Patch by Rune Torgersen, 4 Jun 2003:
2706 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +00002707
wdenk3595ac42003-06-22 17:18:28 +00002708* Patch by Richard Woodruff, 19 June 03:
2709 - Enabled standard u-boot device abstraction for ARM
2710 - Enabled console device for ARM
2711 - Initilized bi_baudrate for ARM
2712
2713* Patch by Bill Hargen, 23 Apr 2003:
2714 fix byte order for 824x I2C addresses (write op)
2715
wdenk592c5ca2003-06-21 00:17:24 +00002716* Patch by Murray Jensen, 20 Jun 2003:
2717 - hymod update
2718 - cleanup (especially for gcc-3.x compilers)
2719
wdenk72755c72003-06-20 23:10:58 +00002720* Patch by Tom Guilliams, 20 Jun 2003:
2721 added CONFIG_750FX support for IBM 750FX processors
2722
wdenk03329902003-06-20 22:36:30 +00002723* Patch by Devin Crumb, 02 Apr 2003:
2724 Fix clock divider rounding problem in drivers/serial.c
2725
2726* Patch by Richard Woodruff, 19 June 03:
2727 - Fixed smc91c111 driver to sync with the u-boot environment
2728 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +00002729 - Added eth_init error return check in NetLoop (net/net.c).
2730
wdenk03329902003-06-20 22:36:30 +00002731* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +00002732 Added support for A3000 SBC board (Artis Microsystems Inc.)
2733
wdenk6dd652f2003-06-19 23:40:20 +00002734* Patches by Murray Jensen, 17 Jun 2003:
2735 - Hymod board database mods: add "who" field and new xilinx chip types
2736 - provide new "init_cmd_timeout()" function so code external to
2737 "common/main.c" can use the "reset_cmd_timeout()" function before
2738 entering the main loop
2739 - add DTT support for adm1021 (new file dtt/adm1021.c; config
2740 slightly different. see include/configs/hymod.h for an example
2741 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
2742 CFG_DTT_ADM1021 defined)
2743 - add new "eeprom_probe()" function which has similar args and
2744 behaves in a similar way to "eeprom_read()" etc.
2745 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
2746 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
2747 - gdbtools copyright update
2748 - ensure that set_msr() executes the "sync" and "isync" instructions
2749 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
2750 - 8260 I/O ports fix: Open Drain should be set last when configuring
2751 - add SIU IRQ defines for 8260
2752 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
2753 config.mk to allow board configurations to override the GNU
2754 linker script, selected via the LDSCRIPT, make variable, and to
2755 give an initial value to the OBJCFLAGS make variable
2756 - 8260 i2c enhancement:
2757 o correctly extends the timeout depending on the size of all
2758 queued messages for both transmit and receive
2759 o will not continue with receive if transmit times out
2760 o ensures that the error callback is done for all queued tx
2761 and rx messages
2762 o correctly detects both tx and rx timeouts, only delivers one to
2763 the callback, and does not overwrite an earlier error
2764 o logic in i2c_probe now correct
2765 - add "vprintf()" function so that "panic()" function can be
2766 technically correct
2767 - many Hymod board changes
2768
wdenk52f52c12003-06-19 23:04:19 +00002769* Patches by Robert Schwebel, 14 Jun 2003:
2770 - add support for Logotronic DL datalogger board
2771 - cleanup serial line after kermit binary download
2772 - add debugX macro (debug level support)
2773 - update mach-types.h to latest arm.linux.org.uk master list.
2774
wdenk48b42612003-06-19 23:01:32 +00002775* Patches by David Müller, 12 Jun 2003:
2776 - rewrite of the S3C24X0 register definitions stuff
2777 - "driver" for the built-in S3C24X0 RTC
2778
2779* Patches by Yuli Barcohen, 12 Jun 2003:
2780 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
2781 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
2782 configuration word supplied by FPGA on some MPC8260ADS boards
2783
2784* Patch by Pantelis Antoniou, 10 Jun 2003:
2785 Unify status LED interface
2786
wdenk15ef8a52003-06-18 20:22:24 +00002787* Add support for DS12887 RTC; add RTC support for ATC board
2788
wdenk2abbe072003-06-16 23:50:08 +00002789* Patch by Nicolas Lacressonniere, 11 Jun 2003:
2790 Modifications for Atmel AT91RM9200DK ARM920T based development kit
2791 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +00002792 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +00002793 - Add Flash detection on Atmel AT91RM9200DK
2794 (between Atmel AT49BV1614 and AT49BV1614A flashes)
2795 - Replace old Ethernet PHY layer functions
2796 - Change link address
2797
2798* Patch by Frank Smith, 9 Jun 2003:
2799 use CRIT_EXCEPTION for machine check on 4xx
2800
2801* Patch by Detlev Zundel, 13 Jun 2003:
2802 added implementation of the "carinfo" command in cmd_immap.c
2803
wdenk71f95112003-06-15 22:40:42 +00002804* Fix CONFIG_NET_MULTI support in include/net.h
2805
2806* Patches by Kyle Harris, 13 Mar 2003:
2807 - Add FAT partition support
2808 - Add command support for FAT
2809 - Add command support for MMC
2810 ----
2811 - Add Intel PXA support for video
2812 - Add Intel PXA support for MMC
2813 ----
2814 - Enable MMC and FAT for lubbock board
2815 - Other misc changes for lubbock board
2816
wdenk487778b2003-06-06 11:20:01 +00002817* Patch by Robert Schwebel, April 02, 2003:
2818 fix for SMSC91111 driver
2819
wdenka3ed3992003-06-05 19:37:36 +00002820* Patch by Vladimir Gurevich, 04 Jun 2003:
2821 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
2822
stroese08eaea92003-06-05 15:44:37 +00002823* Patch by Stefan Roese, 05 Jun 2003:
2824 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
2825 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
2826 data cache can be used even if the chip select is in use.
2827 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
2828 (see README for further description).
2829 - Changed config files of CONFIG_EEPRO100 boards to use the
2830 CFG_RX_ETH_BUFFER define.
2831
wdenk73a8b272003-06-05 19:27:42 +00002832* Add support for RMU board
2833
2834* Add support for TQM862L at 100/50 MHz
2835
2836* Patch by Pantelis Antoniou, 02 Jun 2003:
2837 major reconstruction of networking code;
2838 add "ping" support (outgoing only!)
2839
wdenkf3e0de62003-06-04 15:05:30 +00002840* Patch by Denis Peter, 04 June 2003:
2841 add support for the MIP405T board
2842
wdenk682011f2003-06-03 23:54:09 +00002843* Patches by Udi Finkelstein, 2 June 2003:
2844 - Added support for custom keyboards, initialized by defining a
2845 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
2846 - Added support for the RBC823 board.
2847 - cpu/mpc8xx/lcd.c now automatically calculates the
2848 Horizontal Pixel Count field.
2849
2850* Fix alignment problem in BOOTP (dhcp_leasetime option)
2851 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
2852
2853* Patch by Mark Rakes, 14 May 2003:
2854 add support for Intel e1000 gig cards.
2855
2856* Patch by Nye Liu, 3 Jun 2003:
2857 fix critical typo in MAMR definition (include/mpc8xx.h)
2858
2859* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
2860
2861* Patch by Klaus Heydeck, 2 Jun 2003
2862 Minor changes for KUP4K configuration
2863
wdenk7a8e9bed2003-05-31 18:35:21 +00002864* Patch by Marc Singer, 29 May 2003:
2865 Fixed rarp boot method for IA32 and other little-endian CPUs.
2866
2867* Patch by Marc Singer, 28 May 2003:
2868 Added port I/O commands.
2869
2870* Patch by Matthew McClintock, 28 May 2003
2871 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
2872 - minor patches for utx8245
2873
2874* Patch by Daniel Engström, 28 May 2003:
2875 x86 update
2876
2877* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
2878 add nand flash support to SXNI855T configuration
2879 fix/extend nand flash support:
2880 - fix 'nand erase' command so does not erase bad blocks
2881 - fix 'nand write' command so does not write to bad blocks
2882 - fix nand_probe() so handles no flash detected properly
2883 - add doc/README.nand
2884 - add .jffs2 and .oob options to nand read/write
2885 - add 'nand bad' command to list bad blocks
2886 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
2887 - make NAND read/write faster
2888
2889* Patch by Rune Torgersen, 23 May 2003:
2890 Update for MPC8266ADS board
2891
wdenk3b57fe02003-05-30 12:48:29 +00002892* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
2893 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
2894 _time_ (!) if the environment is embedded within the U-Boot image,
2895 or in a separate flash sector.
2896
2897* Cleanup CFG_DER #defines in config files (wd maintained only)
2898
wdenkf07771c2003-05-28 08:06:31 +00002899* Fix data abort exception handling for arm920t CPU
2900
2901* Fix alignment problems with flash driver for TRAB board
2902
2903* Patch by Donald White, 21 May 2003:
2904 fix calculation of base address in pci_hose_config_device()
2905
2906* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
2907 execute "cmd2", even if "cmd1" fails. Note that this is different
2908 to "run var1 var2" where the contents of "var2" will NOT be
2909 executed when a command in "var1" fails.
2910
wdenk38b99262003-05-23 23:18:21 +00002911* Add zero-copy ramdisk support (requires corresponding kernel support!)
2912
wdenk4c3b21a2003-05-23 12:36:20 +00002913* Patch by Kyle Harris, 20 May 2003:
2914 In preparation for an ixp port, rename cpu/xscale and arch-xscale
2915 into cpu/pxa and arch-pxa.
2916
stroesed9ff6e82003-05-23 11:49:24 +00002917* Patch by Stefan Roese, 23 May 2003:
2918 - IBM PPC405EP port added.
2919 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
2920 UART0) is used as default U-Boot console. PPC4xx only!
2921 - esd ASH405 board added (PPC405EP based).
2922 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
2923 - esd CPCI405AB board added.
2924 - esd PMC405 board added.
2925 - Update of some esd boards.
2926
wdenk33149b82003-05-23 11:38:58 +00002927* Patch by Denis Peter, 19 Mai 2003:
2928 add support for the MIP405-3 board
2929
wdenk5d232d02003-05-22 22:52:13 +00002930* Patch by Dave Ellis, 22 May 2003:
2931 Fix problem with only partially cleared .bss segment
2932
2933* Patch by Rune Torgersen, 12 May 2003:
2934 get PCI to work on a MPC8266ADS board; incorporate change to
2935 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
2936
2937* Patch by Nye Liu, 1 May 2003:
2938 minor patches for the FADS8xx
2939
2940* Patch by Thomas Schäfer, 28 Apr 2003:
2941 Fix SPD handling for 256 ECC DIMM on Walnut
2942
wdenkc8c3a8b2003-05-21 20:26:20 +00002943* Add support for arbitrary bitmaps for TRAB's VFD command;
2944 allow to pass boot bitmap addresses in environment variables;
2945 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +00002946
2947* Patch by Christian Geißinger, 19 May 2002:
2948 On TRAB: wait until the dummy byte has been completely sent
2949
wdenk7f70e852003-05-20 14:25:27 +00002950* Patch by David Updegraff, 22 Apr 2003:
2951 update for CrayL1 board
2952
2953* Patch by Pantelis Antoniou, 21 Apr 2003:
2954 add boot support for ARTOS (a proprietary OS)
2955
2956* Patch by Steven Scholz, 11 Apr 2003:
2957 Add support for RTC DS1338
2958
2959* Patch by Rod Boyce, 24 Jan 2003:
2960 Fix counting of extended partitions in diskboot command
2961
wdenk59de2ed2003-05-20 10:58:04 +00002962* Patch by Christophe Lindheimer, 20 May 2003:
2963 allow the use of CFG_LOADS when CFG_NO_FLASH is set
2964
wdenk86d82762003-05-20 10:39:44 +00002965* Fix SDRAM timing on Purple board
2966
wdenk66fd3d12003-05-18 11:30:09 +00002967* Add support for CompactFlash on ATC board
2968 (includes support for Intel 82365 and compatible PC Card controllers,
2969 and Yenta-compatible PCI-to-CardBus controllers)
2970
wdenk45219c42003-05-12 21:50:16 +00002971* Patch by Mathijs Haarman, 08 May 2003:
2972 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
2973
wdenk9c62cc52003-05-03 23:33:47 +00002974* Fix problem with usage of "true" (undefined in current versions of bfd.h)
2975
wdenk7aa78612003-05-03 15:50:43 +00002976* Add support for Promess ATC board
2977
2978* Patch by Keith Outwater, 28 Apr 2003:
2979 - Miscellaneous corrections and additions to GEN860T board specific code.
2980 - Added GEN860_SC variant to GEN860T.
2981 - Miscellaneous corrections to GEN860T documentation.
2982 - Correct duplicate entry in U-Boot CREDITS file.
2983 - Add GEN860T_SC entry in MAINTAINERS file.
2984 - Update CREDITS file with GEN860T_SC info.
2985
2986* Update Smiths Aerospace addresses in MAINTAINERS file
2987
2988* Fix error handling in hush's version of "run" command
2989
wdenk4532cb62003-04-27 22:52:51 +00002990* LWMON extensions:
2991 - Splashscreen support
2992 - modem support
2993 - sysmon support
2994 - temperature dependend enabling of LCD
2995
2996* Allow booting from old "PPCBoot" disk partitions
2997
2998* Add support for TQM8255 Board / MPC8255 CPU
2999
3000======================================================================
wdenk02c9bed2003-04-20 17:41:25 +00003001Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +00003002======================================================================
3003
wdenkd791b1d2003-04-20 14:04:18 +00003004* Make sure Block Lock Bits get cleared in R360MPI flash driver
3005
3006* MPC823 LCD driver: Fill color map backwards, to allow for steady
3007 display when Linux takes over
3008
3009* Patch by Erwin Rol, 27 Feb 2003:
3010 Add support for RTEMS (this time for real).
3011
3012* Add support for "bmp info" and "bmp display" commands to load
3013 bitmap images; this can be used (for example in a "preboot"
3014 command) to display a splash screen very quickly after poweron.
3015
3016* Add support for 133 MHz clock on INCA-IP board
3017
wdenk4a6fd342003-04-12 23:38:12 +00003018* Patch by Lutz Dennig, 10 Apr 2003:
3019 Update for R360MPI board
3020
3021* Add new meaning to "autostart" environment variable:
3022 If set to "no", a standalone image passed to the
3023 "bootm" command will be copied to the load address
3024 (and eventually uncompressed), but NOT be started.
3025 This can be used to load and uncompress arbitrary
3026 data.
3027
stroese69f8f8272003-04-10 13:30:28 +00003028* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +00003029 Changed DHCP client to use IP address from server option field #54
3030 from the OFFER packet in the server option field #54 in the REQUEST
3031 packet. This fixes a problem using a Windows 2000 DHCP server,
3032 where the DHCP-server is not the TFTP-server.
3033
3034* Set max brightness for MN11236 displays on TRAB board
stroese69f8f8272003-04-10 13:30:28 +00003035
wdenkd126bfb2003-04-10 11:18:18 +00003036* Add support for TQM862L modules
3037
3038======================================================================
wdenk60fbe252003-04-08 23:25:21 +00003039Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +00003040======================================================================
3041
wdenk3e386912003-04-05 00:53:31 +00003042* Patch by Arun Dharankar, 4 Apr 2003:
3043 Add IDMA example code (tested on 8260 only)
3044
3045* Add support for Purple Board (MIPS64 5Kc)
3046
3047* Add support for MIPS64 5Kc CPUs
3048
3049* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
3050
3051* Patch by Denis Peter, 04 Apr 2003:
3052 - update MIP405-4 board
3053
stroese36c05a82003-04-04 16:55:30 +00003054* Patch by Stefan Roese, 4 Apr 2003:
3055 - U-Boot version environment variable "ver" added
3056 (CONFIG_VERSION_VARIABLE).
3057 - Changed PPC405GPr version from A to B.
3058 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
3059
wdenk3e386912003-04-05 00:53:31 +00003060* Patches by Denis Peter, 03 April 2003:
3061 - fix PCI IRQs on MPL boards
3062 - fix two more un-relocated pointer problems
3063
3064* Fix behaviour of "run" command:
3065 - print error message iv variable does not exist
3066 - terminate processing of arguments in case of error
3067
3068* Patches by Peter Figuli, 10 Mar 2003
3069 - Add support for BTUART on PXA platform
3070 - Add support for WEP EP250 (PXA) board
3071
3072* Fix flash problems on INCA-IP; add tool to allow bruning images to
3073 flash using a BDI2000
3074
3075* Implement fix for I2C Edge Conditions problem for all boards that
3076 use the bit-banging driver (common/soft_i2c.c)
3077
wdenk0db5bca2003-03-31 17:27:09 +00003078* Patch by Martin Winistoerfer, 23 Mar 2003
3079 - Add port to MPC555/556 microcontrollers
3080 - Add support for cmi customer board with
3081 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
3082
3083* Patch by Rick Bronson, 28 Mar 2003:
3084 - fix common/cmd_nand.c
3085
wdenk85ec0bc2003-03-31 16:34:49 +00003086* Patch by Arun Dharankar, 24 Mar 2003:
3087 - add threads / scheduler example code
3088
3089* Add patches by Robert Schwebel, 31 Mar 2003:
3090 - add ctrl-c support for kermit download
3091 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +00003092 - csb226 board: bring in sync with innokom/memsetup.S
3093 - csb226 board: fix MDREFR handling
3094 - misc doc fixes / extensions
3095 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
3096 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +00003097
stroese36c05a82003-04-04 16:55:30 +00003098* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +00003099
wdenk506f0442003-03-28 14:40:36 +00003100* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
3101 - fix SRAM and SDRAM memory sizing
3102 - add status LED support
3103 - add MAC address for second (SCC1) ethernet port
3104
3105* Update default environment for TQM8260 board
3106
wdenkdc7c9a12003-03-26 06:55:25 +00003107* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +00003108 - Add NAND flash support for reading, writing, and erasing NAND
3109 flash (certain forms of which are called SmartMedia).
3110 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +00003111
3112* Patches by Robert Schwebel, 19 Mar 2003:
3113 - use arm-linux-gcc as default compiler for ARM
3114 - fix i2c fixup code
3115 - fix missing baudrate setting
3116 - added $loadaddr / CFG_LOAD_ADDR support to loadb
3117 - moved "ignoring trailing characters" _before_ u-boot wants to
3118 print out diagnostics messages; removes bogus characters at the
3119 end of transmission
3120
3121* Patch by John Zhan, 18 Mar 2003:
3122 Add support for SinoVee Microsystems SC8xx boards
3123
3124* Patch by Rolf Offermanns, 21 Mar 2003:
3125 ported the dnp1110 related changes from the current armboot cvs to
3126 current u-boot cvs. smc91111 does not work. problem marked in
3127 smc91111.c, grep for "FIXME".
3128
3129* Patch by Brian Auld, 25 Mar 2003:
3130 Add support for STM flash chips on ebony board
3131
wdenk4d75a502003-03-25 16:50:56 +00003132* Add PCI support for MPC8250 Boards (PM825 module)
3133
stroese44e5c5c2003-03-25 14:44:48 +00003134* Patch by Stefan Roese, 25 Mar 2003:
3135 - PCI405 update.
3136
stroese5d5d44e2003-03-20 15:32:59 +00003137* Patch by Stefan Roese, 20 Mar 2003:
3138 - CPCI4052 update (support for revision 3).
3139 - Set edge conditioning circuitry on PPC405GPr for compatibility
3140 to existing PPC405GP designs.
3141 - Clip udiv to 5 bits on PPC405 (serial.c).
3142
wdenkc0218802003-03-27 12:09:35 +00003143* Extend INCAIP board support:
3144 - add automatic RAM size detection
3145 - add "bdinfo" command
3146 - pass flash address and size to Linux kernel
3147 - switch to 150 MHz clock
3148
wdenk06d01db2003-03-14 20:47:52 +00003149* Avoid flicker on the TRAB's VFD by synchronizing the enable with
3150 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
3151 boards, version 153 for Rev. 200 boards).
3152
3153* Patch by Vladimir Gurevich, 12 Mar 2003:
3154 Fix relocation problem of statically initialized string pointers
3155 in common/cmd_pci.c
3156
3157* Patch by Kai-Uwe Blöm, 12 Mar 2003:
3158 Cleanup & bug fixes for JFFS2 code:
3159 - the memory mangement was broken. It caused havoc on malloc by
3160 writing beyond the block boundaries.
3161 - the length calculation for files was wrong, sometimes resulting
3162 in short file reads.
3163 - data copying now optionally takes fragment version numbers into
3164 account, to avoid copying from older data.
3165 See doc/README.JFFS2 for details.
3166
wdenk3bac3512003-03-12 10:41:04 +00003167* Patch by Josef Wagner, 12 Mar 2003:
3168 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
3169 - ETH05 and BEDBUG support for CU824
3170 - added support for MicroSys CPC45
3171 - new BOOTROM/FLASH0 and DOC base for PM826
3172
3173* Patch by Robert Schwebel, 12 Mar 2003:
3174 Fix the chpart command on innokom board
3175
3176* Name cleanup:
3177 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
3178 s/PPCBoot/U-Boot/ in some files
3179 s/pImage/uImage/ in some files
3180
3181* Patch by Detlev Zundel, 15 Jan 2003:
3182 Fix '' command line quoting
3183
3184* Patch by The LEOX team, 19 Jan 2003:
3185 - add support for the ELPT860 board
3186 - add support for Dallas ds164x RTC
3187
wdenk1cb8e982003-03-06 21:55:29 +00003188* Patches by David Müller, 31 Jan 2003:
3189 - minimal setup for CardBus bridges
3190 - add EEPROM read/write support in the CS8900 driver
3191 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +00003192 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +00003193
3194* Patch by Steven Scholz, 04 Feb 2003:
3195 add support for RTC DS1307
3196
3197* Patch by Reinhard Meyer, 5 Feb 2003:
3198 fix PLPRCR/SCCR init sequence on 8xx to allow for
3199 changes of EBDF by software
3200
3201* Patch by Vladimir Gurevich, 07 Feb 2003:
3202 "API-compatibility patch" for 4xx I2C driver
3203
3204* TRAB fixes / extensions:
3205 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +00003206 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +00003207 - make sure both buzzers are turned off (drive low level)
3208
wdenk47cd00f2003-03-06 13:39:27 +00003209* Patches by Robert Schwebel, 06 Mar 2003:
3210 - fix bug in BOOTP code (must use NetCopyIP)
3211 - update of CSB226 port
3212 - clear BSS segment on XScale
3213 - added support for i2c_init_board() function
3214 - update to the Innokom plattform
3215
3216* Extend support for redundand environments for configurations where
3217 environment size < sector size
3218
wdenkdb2f721f2003-03-06 00:58:30 +00003219* Patch by Rune Torgersen, 13 Feb 2003:
3220 Add support for Motorola MPC8266ADS board
3221
3222* Patch by Kyle Harris, 19 Feb 2003:
3223 patches for the Intel lubbock board:
3224 memsetup.S - general cleanup (based on Robert's csb226 code)
3225 flash.c - overhaul, actually works now
3226 lubbock.c - fix init funcs to return proper value
3227
3228* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +00003229 - Fixed off by one in RFTA calculation.
wdenkdb2f721f2003-03-06 00:58:30 +00003230 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +00003231 minimum timing so clamp it to what we can do.
wdenkdb2f721f2003-03-06 00:58:30 +00003232 - Takes function pointer to function for reading the spd_nvram. Usefull
3233 for faking data or hardcode a module without the nvram.
3234 - fix other user for above change
3235 - fix some comments.
3236
3237* Patches by Brian Waite, 26 Feb 2003:
3238 - fix port for evb64260 board
3239 - fix PCI for evb64260 board
3240 - fix PCI scan
3241
3242* Patch by Reinhard Meyer, 1 Mar 2003:
3243 Add support for EMK TOP860 Module
3244
3245* Patch by Yuli Barcohen, 02 Mar 2003:
3246 Add SPD EEPROM support for MPC8260ADS board
3247
wdenk43d96162003-03-06 00:02:04 +00003248* Patch by Robert Schwebel, 21 Jan 2003:
3249 - Add support for Innokom board
3250 - Don't complain if "install" fails
3251 - README cleanup (remove duplicated lines)
3252 - Update PXA header files
3253
3254* Add documentation for existing POST code (doc/README.POST)
3255
3256* Patch by Laudney Ren, 15 Jan 2003:
3257 Fix handling of redundand environment in "tools/envcrc.c"
3258
3259* Patch by Detlev Zundel, 28 Feb 2003:
3260 Add bedbug support for 824x systems
3261
3262* Add support for 16 MB flash configuration of TRAB board
3263
3264* Patch by Erwin Rol, 27 Feb 2003:
3265 Add support for RTEMS
3266
3267* Add image information to README
3268
stroese2a9e02e2003-02-18 11:30:24 +00003269* Patch by Stefan Roese, 18 Feb 2003:
3270 CPCIISER4 configuration updated.
3271
stroesed7787c62003-02-17 16:06:06 +00003272* Patch by Stefan Roese, 17 Feb 2003:
3273 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
3274
stroesead10dd92003-02-14 11:21:23 +00003275* Patch by Stefan Roese, 13 Feb 2003:
3276 Add "pcidelay" environment variable (in ms, enabled via
3277 CONFIG_PCI_BOOTDELAY).
3278 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
3279 RST# to respond to configuration cycles (33MHz -> 1s).
3280
wdenk43d96162003-03-06 00:02:04 +00003281* Fix dual PCMCIA slot support (when running with just one
3282 slot populated)
3283
3284* Add VFD type detection to trab board
3285
3286* extend drivers/cs8900.c driver to synchronize ethaddr environment
3287 variable with value in the EEPROM
3288
stroeseee1b3b52003-02-10 16:39:00 +00003289* Patch by Stefan Roese, 10 Feb 2003:
3290 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
3291
wdenkc0218802003-03-27 12:09:35 +00003292* Add support for MIPS32 4Kc CPUs
3293
3294* Add support for INCA-IP Board
3295
wdenk43d96162003-03-06 00:02:04 +00003296======================================================================
3297Changes for U-Boot 0.2.2:
3298======================================================================
3299
wdenkaacf9a42003-01-17 16:27:01 +00003300* Add dual ethernet support on PM826
3301
3302* Add support for LXT971 PHY on PM826
3303
3304* Patch by Tord Andersson, 16 Jan 2003:
3305 Fix flash sector count for TQM8xxL
3306
3307* Fix I2C EEPROM problem on ICU862 board (would only write the first
3308 16 bytes out of each 32 byte block)
3309
3310======================================================================
3311Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +00003312======================================================================
3313
wdenk608c9142003-01-13 23:54:46 +00003314* Add support for V37 board
3315 (patch by Jón Benediktsson, 11 Dec 2002)
3316
wdenkd0fb80c2003-01-11 09:48:40 +00003317* Update baudrate in bd_info when it gets changed
3318
3319* Add watchdog trigger points while waiting for serial port
3320 (so far only 8xx -- needed on LWMON with 100ms watchdog)
3321
3322* Improve command line tool to access the U-Boot's environment
3323 (figuration of the utility, using a config file)
3324
wdenka25f8622003-01-02 23:57:29 +00003325* Add single quote support for (old) command line parser
3326
wdenk288b3d72002-12-20 23:42:25 +00003327* Switch LWMON board default config from FRAM to EEPROM;
3328 in POST, EEPROM shows up on 8 addresses
3329
3330======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +00003331Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00003332======================================================================
3333
wdenk6aff3112002-12-17 01:51:00 +00003334* Use 1-byte-read instead of -write for iprobe() function
3335 Add i2c commands to PM826 config
3336
3337* extend I2C POST code: check for list on known addresses
3338
wdenk228f29a2002-12-08 09:53:23 +00003339* Improve log buffer code; use "loglevel" to decide which messages
3340 to log on the console, too (like in Linux); get rid of "logstart"
3341
3342* Add command line tool to access the U-Boot's environment
3343 (board-specific for TRAB now, to be fixed later)
3344
wdenk7c7a23b2002-12-07 00:20:59 +00003345* Patch by Hans-Joerg Frieden, 06 Dec 2002
3346 Fix misc problems with AmigaOne support
3347
3348* Patch by Chris Hallinan, 3 Dec 2002:
3349 minor cleanup to the MPC8245 EPIC driver
3350
3351* Patch by Pierre Aubert , 28 Nov 2002
3352 Add support for external (SIU) interrupts on MPC8xx
3353
3354* Patch by Pierre Aubert , 28 Nov 2002
3355 Fix nested syscalls bug in standalone applications
3356
3357* Patch by David Müller, 27 Nov 2002:
3358 fix output of "pciinfo" command for CardBus bridge devices.
3359
3360* Fix bug in TQM8260 board detection - boards got stuck when board ID
3361 was not readable
3362
wdenk1f53a412002-12-04 23:39:58 +00003363* Add LED indication for IDE activity on KUP4K board
3364
wdenka6c7ad22002-12-03 21:28:10 +00003365* Fix startup problems with VFD display on TRAB
3366
3367* Patch by Pierre Aubert, 20 Nov 2002
3368 Add driver for Epson SED13806 graphic controller.
3369 Add support for BMP logos in cfb_console driver.
3370
wdenkea909b72002-11-21 23:11:29 +00003371* Added support for both PCMCIA slots (at the same time!) on MPC8xx
3372
3373* Patch by Rod Boyce, 21 Nov 2002:
3374 fix PCMCIA on MBX8xx board
3375
3376* Patch by Pierre Aubert , 21 Nov 2002
3377 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
3378 bootmode word in DPRAM configurable
3379
wdenkb2184c32002-11-19 23:01:07 +00003380* Patch by Daniel Engström, 18 Nov 2002:
3381 Fixes for x86 port (mostly strings issues)
3382
3383* Patch by Ken Chou, 18 Nov 2002:
3384 Fix for natsemi NIC cards (DP83815)
3385
3386* Patch by Pierre Aubert, 19 Nov 2002:
3387 fix a bug for the MII configuration, and some warnings
3388
wdenkc7de8292002-11-19 11:04:11 +00003389* Patch by Thomas Frieden, 13 Nov 2002:
3390 Add code for AmigaOne board
3391 (preliminary merge to U-Boot, still WIP)
3392
3393* Patch by Jon Diekema, 12 Nov 2002:
3394 - Adding URL for IEEE OUI lookup
3395 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
3396 being defined.
3397 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
3398 root-on-nfs macros are designed to switch how the default boot
3399 method gets defined.
3400
wdenk2262cfe2002-11-18 00:14:45 +00003401* Patch by Daniel Engström, 13 Nov 2002:
3402 Add support for i386 architecture and AMD SC520 board
3403
3404* Patch by Pierre Aubert, 12 Nov 2002:
3405 Add support for DOS filesystem and booting from DOS floppy disk
3406
wdenk1d0350e2002-11-11 21:14:20 +00003407* Patch by Jim Sandoz, 07 Nov 2002:
3408 Increase number of network RX buffers (PKTBUFSRX in
3409 "include/net.h") for EEPRO100 based boards (especially SP8240)
3410 which showed "Receiver is not ready" errors when U-Boot was
3411 processing the receive buffers slower than the network controller
3412 was filling them.
3413
wdenkeb9401e2002-11-11 02:11:37 +00003414* Patch by Andreas Oberritter, 09 Nov 2002:
3415 Change behaviour of NetLoop(): return -1 for errors, filesize
3416 otherwise; return code 0 is valid an means no file loaded - in this
3417 case the environment still gets updated!
3418
3419* Patches by Jon Diekema, 9 Nov 2002:
3420 - improve ADC/DAC clocking on the SACSng board to align
3421 the failing edges of LRCLK and SCLK
3422 - sbc8260 configuration tweaks
3423 - add status LED support for 82xx systems
3424 - wire sspi/sspo commands into command handler; improved error
3425 handlering
3426 - add timestamp support and alternate memory test to the
3427 SACSng configuration
3428
3429* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +00003430 Add "-n" to linker options to get rid of "Not enough room for
3431 program headers" problem
3432
3433* Patch by David Müller, 05 Nov 2002
3434 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
3435 so we can use an already existing name
3436
3437* Patch by Pierre Aubert, 05 Nov 2002
3438 Hardware relatied improvments in FDC boot code
3439
3440* Patch by Holger Schurig, 5 Nov 2002:
3441 Make the PXA really change it's frequency
3442
3443* Patch by Pierre Aubert, 05 Nov 2002
3444 Add support for slave serial Spartan 2 FPGAs
3445
3446* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
3447 drivers
3448
wdenk56f94be2002-11-05 16:35:14 +00003449* Add support for log buffer which can be passed to Linux kernel's
3450 syslog mechanism; used especially for POST results.
3451
3452* Patch by Klaus Heydeck, 31 Oct 2002:
3453 Add initial support for kup4k board
3454
wdenk384ae022002-11-05 00:17:55 +00003455* Patch by Robert Schwebel, 04 Nov 2002:
3456 - use watchdog to reset PXA250 systems
3457 - added progress callbacks to (some of the) ARM code
3458 - update for Cogent CSB226 board
3459
3460* Add support for FPS860 board
3461
wdenke95b61c2002-11-04 16:02:40 +00003462* Patch by Guillaume Alexandre,, 04 Nov 2002:
3463 Improve PCI access on 32-bits Compact PCI bus
3464
wdenk24ee89b2002-11-03 17:56:27 +00003465* Fix mdelay() on TRAB - this was still the debugging version with
3466 seconds instead of ms.
3467
3468* Patch by Robert Schwebel, 1 Nov 2002:
3469 XScale related cleanup (affects all ARM boards)
3470
3471* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00003472
3473======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00003474Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00003475======================================================================
3476
3477This is the initial version of "Das U-Boot", the Universal Boot Loader.
3478
3479It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
3480For information about the history of the project please see the
3481PPCBoot project page at http://sourceforge.net/projects/ppcboot
3482
3483======================================================================