blob: 41fa2fe5664dae4727a8ff8680d605ab5563a85f [file] [log] [blame]
Alexaf2cbfd2017-02-06 19:17:34 -08001source "drivers/net/phy/Kconfig"
Calvin Johnsona802d1e2018-03-08 15:30:35 +05302source "drivers/net/pfe_eth/Kconfig"
Florinel Iordache1bad9912019-05-15 09:09:21 +00003source "drivers/net/fsl-mc/Kconfig"
Alexaf2cbfd2017-02-06 19:17:34 -08004
Joe Hershberger05c3e682015-03-22 17:09:10 -05005config DM_ETH
6 bool "Enable Driver Model for Ethernet drivers"
7 depends on DM
8 help
9 Enable driver model for Ethernet.
10
Joe Hershbergerc25f4062018-07-02 14:47:48 -050011 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
Joe Hershberger05c3e682015-03-22 17:09:10 -050013 Look in include/net.h for details.
Joe Hershberger3ea143a2015-03-22 17:09:13 -050014
Alex Margineanc3452b52019-06-03 19:10:30 +030015config DM_MDIO
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
18 help
19 Enable driver model for MDIO devices
20
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
24 Ethernet interfaces.
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
27
Alex Marginean8880edb2019-07-12 10:13:50 +030028config DM_MDIO_MUX
29 bool "Enable Driver Model for MDIO MUX devices"
30 depends on DM_MDIO
31 help
32 Enable driver model for MDIO MUX devices
33
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
36 the MDIO bus.
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
39
Claudiu Manoilfc054d52021-01-25 14:23:53 +020040config DM_DSA
41 bool "Enable Driver Model for DSA switches"
42 depends on DM_ETH && DM_MDIO
43 depends on PHY_FIXED
44 help
45 Enable driver model for DSA switches
46
47 Adds UCLASS_DSA class supporting switches that follow the Distributed
48 Switch Architecture (DSA). These switches rely on the presence of a
49 management switch port connected to an Ethernet controller capable of
50 receiving frames from the switch. This host Ethernet controller is
51 called the "master" Ethernet interface in DSA terminology.
52 This is currently implemented in net/dsa-uclass.c, refer to
53 include/net/dsa.h for API details.
54
Alex Margineanec9594a2019-06-03 19:12:28 +030055config MDIO_SANDBOX
56 depends on DM_MDIO && SANDBOX
57 default y
58 bool "Sandbox: Mocked MDIO driver"
59 help
60 This driver implements dummy read/write/reset MDIO functions mimicking
61 a bus with a single PHY.
62
63 This driver is used in for testing in test/dm/mdio.c
64
Alex Margineanc3d9f3f2019-07-12 10:13:53 +030065config MDIO_MUX_SANDBOX
66 depends on DM_MDIO_MUX && MDIO_SANDBOX
67 default y
68 bool "Sandbox: Mocked MDIO-MUX driver"
69 help
70 This driver implements dummy select/deselect ops mimicking a MUX on
71 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
72
73 This driver is used for testing in test/dm/mdio.c
74
Ye Li5fe419e2020-05-03 22:41:14 +080075config DM_ETH_PHY
76 bool "Enable Driver Model for Ethernet Generic PHY drivers"
77 depends on DM
78 help
79 Enable driver model for Ethernet Generic PHY .
80
Joe Hershberger3ea143a2015-03-22 17:09:13 -050081menuconfig NETDEVICES
82 bool "Network device support"
83 depends on NET
Joe Hershbergeref0f2f52015-06-22 16:15:30 -050084 default y if DM_ETH
Joe Hershberger3ea143a2015-03-22 17:09:13 -050085 help
86 You must select Y to enable any network device support
87 Generally if you have any networking support this is a given
88
89 If unsure, say Y
90
91if NETDEVICES
92
Philipp Tomsich449ea2c2017-03-26 18:50:23 +020093config PHY_GIGE
94 bool "Enable GbE PHY status parsing and configuration"
95 help
96 Enables support for parsing the status output and for
97 configuring GbE PHYs (affects the inner workings of some
98 commands and miiphyutil.c).
99
Marek Vasute40095f2016-05-24 23:29:09 +0200100config AG7XXX
101 bool "Atheros AG7xxx Ethernet MAC support"
102 depends on DM_ETH && ARCH_ATH79
103 select PHYLIB
104 help
105 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
106 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
107
108
Thomas Chou96fa1e42015-10-22 15:29:11 +0800109config ALTERA_TSE
110 bool "Altera Triple-Speed Ethernet MAC support"
111 depends on DM_ETH
112 select PHYLIB
113 help
114 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
115 Please find details on the "Triple-Speed Ethernet MegaCore Function
116 Resource Center" of Altera.
117
Suji Velupillaic89782d2017-07-10 14:05:41 -0700118config BCM_SF2_ETH
119 bool "Broadcom SF2 (Starfighter2) Ethernet support"
120 select PHYLIB
121 help
122 This is an abstract framework which provides a generic interface
123 to MAC and DMA management for multiple Broadcom SoCs such as
124 Cygnus, NSP and bcm28155_ap platforms.
125
126config BCM_SF2_ETH_DEFAULT_PORT
127 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
128 depends on BCM_SF2_ETH
129 default 0
130 help
131 Default port number for the Starfighter2 ethernet driver.
132
133config BCM_SF2_ETH_GMAC
134 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
135 depends on BCM_SF2_ETH
136 help
137 This flag enables the ethernet support for Broadcom platforms with
138 GMAC such as Cygnus. This driver is based on the framework provided
139 by the BCM_SF2_ETH driver.
140 Say Y to any bcmcygnus based platforms.
141
Álvaro Fernández Rojas55e55fe2018-12-01 19:00:24 +0100142config BCM6348_ETH
143 bool "BCM6348 EMAC support"
144 depends on DM_ETH && ARCH_BMIPS
145 select DMA
146 select DMA_CHANNELS
147 select MII
148 select PHYLIB
149 help
150 This driver supports the BCM6348 Ethernet MAC.
151
Álvaro Fernández Rojas96229722018-12-01 19:00:32 +0100152config BCM6368_ETH
153 bool "BCM6368 EMAC support"
154 depends on DM_ETH && ARCH_BMIPS
155 select DMA
156 select MII
157 help
158 This driver supports the BCM6368 Ethernet MAC.
159
Amit Singh Tomard53e3fa2020-01-27 01:14:42 +0000160config BCMGENET
161 bool "BCMGENET V5 support"
162 depends on DM_ETH
163 select PHYLIB
164 help
165 This driver supports the BCMGENET Ethernet MAC.
166
Aaron Tsengfebe13b2021-01-14 13:34:11 -0800167config CORTINA_NI_ENET
168 bool "Cortina-Access Ethernet driver"
169 depends on DM_ETH && CORTINA_PLATFORM
170 help
171 This driver supports the Cortina-Access Ethernet MAC for
172 all supported CAxxxx SoCs.
173
Stephen Warrenba4dfef2016-10-21 14:46:47 -0600174config DWC_ETH_QOS
175 bool "Synopsys DWC Ethernet QOS device support"
176 depends on DM_ETH
177 select PHYLIB
178 help
179 This driver supports the Synopsys Designware Ethernet QOS (Quality
180 Of Service) IP block. The IP supports many options for bus type,
Patrick Delaunaya08f2f72020-06-08 11:27:19 +0200181 clocking/reset structure, and feature list.
182
183config DWC_ETH_QOS_IMX
184 bool "Synopsys DWC Ethernet QOS device support for IMX"
185 depends on DWC_ETH_QOS
186 help
187 The Synopsys Designware Ethernet QOS IP block with the specific
188 configuration used in IMX soc.
189
190config DWC_ETH_QOS_STM32
191 bool "Synopsys DWC Ethernet QOS device support for STM32"
192 depends on DWC_ETH_QOS
193 default y if ARCH_STM32MP
194 help
195 The Synopsys Designware Ethernet QOS IP block with the specific
196 configuration used in STM32MP soc.
197
198config DWC_ETH_QOS_TEGRA186
199 bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
200 depends on DWC_ETH_QOS
201 default y if TEGRA186
202 help
203 The Synopsys Designware Ethernet QOS IP block with specific
204 configuration used in NVIDIA's Tegra186 chip.
Stephen Warrenba4dfef2016-10-21 14:46:47 -0600205
Simon Glassc294ac52015-08-19 09:33:41 -0600206config E1000
207 bool "Intel PRO/1000 Gigabit Ethernet support"
Madalin Bucur94472222020-04-29 08:26:17 +0300208 depends on (DM_ETH && DM_PCI) || !DM_ETH
Simon Glassc294ac52015-08-19 09:33:41 -0600209 help
210 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
211 adapters. For more information on how to identify your adapter, go
212 to the Adapter & Driver ID Guide at:
213
214 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
215
216config E1000_SPI_GENERIC
217 bool "Allow access to the Intel 8257x SPI bus"
218 depends on E1000
219 help
220 Allow generic access to the SPI bus on the Intel 8257x, for
221 example with the "sspi" command.
222
223config E1000_SPI
224 bool "Enable SPI bus utility code"
225 depends on E1000
226 help
227 Utility code for direct access to the SPI bus on Intel 8257x.
228 This does not do anything useful unless you set at least one
229 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
230
231config CMD_E1000
232 bool "Enable the e1000 command"
233 depends on E1000
234 help
235 This enables the 'e1000' management command for E1000 devices. When
236 used on devices with SPI support you can reprogram the EEPROM from
237 U-Boot.
238
Marek Vasut6463b732020-05-23 18:07:53 +0200239config EEPRO100
240 bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
241 help
242 This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
243 ethernet family of adapters.
244
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500245config ETH_SANDBOX
246 depends on DM_ETH && SANDBOX
247 default y
248 bool "Sandbox: Mocked Ethernet driver"
249 help
250 This driver simply responds with fake ARP replies and ping
251 replies that are used to verify network stack functionality
252
253 This driver is particularly useful in the test/dm/eth.c tests
254
Joe Hershbergera346ca72015-03-22 17:09:21 -0500255config ETH_SANDBOX_RAW
256 depends on DM_ETH && SANDBOX
257 default y
258 bool "Sandbox: Bridge to Linux Raw Sockets"
259 help
260 This driver is a bridge from the bottom of the network stack
261 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
262 network traffic to be tested from within sandbox. See
Keerthy5917d0b2019-07-29 13:52:04 +0530263 doc/arch/index.rst for more details.
Joe Hershbergera346ca72015-03-22 17:09:21 -0500264
Simon Glassef48f6d2015-04-05 16:07:34 -0600265config ETH_DESIGNWARE
266 bool "Synopsys Designware Ethernet MAC"
Thomas Chou25af71c2015-12-07 20:53:29 +0800267 select PHYLIB
Simon Goldschmidt6fb1eb12019-01-13 19:58:41 +0100268 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
Simon Glassef48f6d2015-04-05 16:07:34 -0600269 help
270 This MAC is present in SoCs from various vendors. It supports
271 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
272 provide the PHY (physical media interface).
273
Marek Vasut215a0652018-08-13 19:32:14 +0200274config ETH_DESIGNWARE_SOCFPGA
Simon Goldschmidt4f1267c2019-01-13 19:58:40 +0100275 select REGMAP
276 select SYSCON
Marek Vasut215a0652018-08-13 19:32:14 +0200277 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
278 depends on DM_ETH && ETH_DESIGNWARE
279 help
280 The Altera SoCFPGA requires additional configuration of the
281 Altera system manager to correctly interface with the PHY.
282 This code handles those SoC specifics.
283
Amit Singh Tomar3c5c4ee2020-05-09 19:55:12 +0530284config ETH_DESIGNWARE_S700
285 bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
286 depends on DM_ETH && ETH_DESIGNWARE
287 help
288 This provides glue layer to use Synopsys Designware Ethernet MAC
289 present on Actions S700 SoC.
290
Max Filippovf0727122016-08-05 18:26:15 +0300291config ETHOC
292 bool "OpenCores 10/100 Mbps Ethernet MAC"
293 help
294 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
295
Peng Fanfbada482018-03-28 20:54:14 +0800296config FEC_MXC_SHARE_MDIO
297 bool "Share the MDIO bus for FEC controller"
298 depends on FEC_MXC
299
300config FEC_MXC_MDIO_BASE
301 hex "MDIO base address for the FEC controller"
302 depends on FEC_MXC_SHARE_MDIO
303 help
304 This specifies the MDIO registers base address. It is used when
305 two FEC controllers share MDIO bus.
306
Jagan Teki97d29ca2016-10-08 18:00:12 +0530307config FEC_MXC
308 bool "FEC Ethernet controller"
Peng Fan81dc2ac2019-10-22 03:29:58 +0000309 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
Jagan Teki97d29ca2016-10-08 18:00:12 +0530310 help
311 This driver supports the 10/100 Fast Ethernet controller for
312 NXP i.MX processors.
313
Tom Rinicc1e98b2019-05-12 07:59:12 -0400314config FMAN_ENET
315 bool "Freescale FMan ethernet support"
316 depends on ARM || PPC
317 help
318 This driver support the Freescale FMan Ethernet controller
319
Tom Rini8dc1b172017-05-26 11:18:53 -0400320config FTMAC100
321 bool "Ftmac100 Ethernet Support"
322 help
323 This MAC is present in Andestech SoCs.
324
Cédric Le Goaterf95de0b2018-10-29 07:06:31 +0100325config FTGMAC100
326 bool "Ftgmac100 Ethernet Support"
327 depends on DM_ETH
328 select PHYLIB
329 help
330 This driver supports the Faraday's FTGMAC100 Gigabit SoC
331 Ethernet controller that can be found on Aspeed SoCs (which
332 include NCSI).
333
334 It is fully compliant with IEEE 802.3 specification for
335 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
336 Mbps Ethernet and includes Reduced Media Independent
337 Interface (RMII) and Reduced Gigabit Media Independent
338 Interface (RGMII) interfaces. It adopts an AHB bus interface
339 and integrates a link list DMA engine with direct M-Bus
340 accesses for transmitting and receiving packets. It has
341 independent TX/RX fifos, supports half and full duplex (1000
342 Mbps mode only supports full duplex), flow control for full
343 duplex and backpressure for half duplex.
344
345 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
346 and supports IEEE 802.1Q VLAN tag insertion and removal. It
347 offers high-priority transmit queue for QoS and CoS
348 applications.
349
350
Angelo Durgehello080bcc52019-11-15 23:54:17 +0100351config MCFFEC
352 bool "ColdFire Ethernet Support"
353 depends on DM_ETH
354 select PHYLIB
355 help
356 This driver supports the network interface units in the
357 ColdFire family.
358
359config FSLDMAFEC
360 bool "ColdFire DMA Ethernet Support"
361 depends on DM_ETH
362 select PHYLIB
363 help
364 This driver supports the network interface units in the
365 ColdFire family.
366
Marek Vasutdf4c4832020-03-25 19:08:59 +0100367config KS8851_MLL
368 bool "Microchip KS8851-MLL controller driver"
369 help
370 The Microchip KS8851 parallel bus external ethernet interface chip.
371
372if KS8851_MLL
373if !DM_ETH
374config KS8851_MLL_BASEADDR
375 hex "Microchip KS8851-MLL Base Address"
376 help
377 Define this to hold the physical address of the device (I/O space)
378endif #DM_ETH
379endif #KS8851_MLL
380
Chris Packhamed52ea52018-05-03 23:00:35 +1200381config MVGBE
382 bool "Marvell Orion5x/Kirkwood network interface support"
Trevor Woernerbb0fb4c2020-05-06 08:02:40 -0400383 depends on ARCH_KIRKWOOD || ARCH_ORION5X
Chris Packhamfb731072018-07-09 21:34:00 +1200384 select PHYLIB if DM_ETH
Chris Packhamed52ea52018-05-03 23:00:35 +1200385 help
386 This driver supports the network interface units in the
387 Marvell Orion5x and Kirkwood SoCs
388
Chris Packham7654f622017-08-21 20:17:03 +1200389config MVNETA
Miquel Raynale7ab2cc2017-12-28 15:43:09 +0100390 bool "Marvell Armada XP/385/3700 network interface support"
391 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
Chris Packham7654f622017-08-21 20:17:03 +1200392 select PHYLIB
393 help
394 This driver supports the network interface units in the
Miquel Raynale7ab2cc2017-12-28 15:43:09 +0100395 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
Chris Packham7654f622017-08-21 20:17:03 +1200396
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100397config MVPP2
Stefan Roesee7935c42017-02-15 11:42:59 +0100398 bool "Marvell Armada 375/7K/8K network interface support"
399 depends on ARMADA_375 || ARMADA_8K
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100400 select PHYLIB
Nevo Hed17caaf82019-08-15 18:08:45 -0400401 select MVMDIO
402 select DM_MDIO
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100403 help
404 This driver supports the network interface units in the
Stefan Roesee7935c42017-02-15 11:42:59 +0100405 Marvell ARMADA 375, 7K and 8K SoCs.
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100406
Wenyou Yangebcb40a2016-11-02 10:06:55 +0800407config MACB
408 bool "Cadence MACB/GEM Ethernet Interface"
409 depends on DM_ETH
410 select PHYLIB
411 help
412 The Cadence MACB ethernet interface is found on many Atmel
413 AT91 and SAMA5 parts. This driver also supports the Cadence
414 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
415 Say Y to include support for the MACB/GEM chip.
416
Wilson Lee4bf56912017-08-22 20:25:07 -0700417config MACB_ZYNQ
418 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
419 depends on MACB
420 help
421 The Cadence MACB ethernet interface was used on Zynq platform.
422 Say Y to enable support for the MACB/GEM in Zynq chip.
423
Weijie Gao17ade702020-11-12 16:36:53 +0800424config MT7620_ETH
425 bool "MediaTek MT7620 Ethernet Interface"
426 depends on SOC_MT7620
427 select PHYLIB
428 select DM_RESET
429 select DM_GPIO
430 select CLK
431 help
432 The MediaTek MT7620 ethernet interface is used on MT7620 based
433 boards. It has a built-in switch with two configurable ports which
434 can connect to external PHY/MACs.
435
Stefan Roesec895ef42018-10-26 14:53:27 +0200436config MT7628_ETH
437 bool "MediaTek MT7628 Ethernet Interface"
Weijie Gao16b94902019-04-30 11:13:58 +0800438 depends on SOC_MT7628
Weijie Gaof0793212019-09-25 17:45:33 +0800439 select PHYLIB
Stefan Roesec895ef42018-10-26 14:53:27 +0200440 help
441 The MediaTek MT7628 ethernet interface is used on MT7628 and
442 MT7688 based boards.
443
Suneel Garapati0008e9a2020-08-26 14:37:33 +0200444config NET_OCTEONTX
445 bool "OcteonTX Ethernet support"
446 depends on ARCH_OCTEONTX
447 depends on PCI_SRIOV
448 help
449 You must select Y to enable network device support for
450 OcteonTX SoCs. If unsure, say n
Suneel Garapati4684a7a2020-08-26 14:37:42 +0200451
452config NET_OCTEONTX2
453 bool "OcteonTX2 Ethernet support"
454 depends on ARCH_OCTEONTX2
455 select OCTEONTX2_CGX_INTF
456 help
457 You must select Y to enable network device support for
458 OcteonTX2 SoCs. If unsure, say n
459
Suneel Garapati0008e9a2020-08-26 14:37:33 +0200460config OCTEONTX_SMI
461 bool "OcteonTX SMI Device support"
462 depends on ARCH_OCTEONTX || ARCH_OCTEONTX2
463 help
464 You must select Y to enable SMI controller support for
465 OcteonTX or OcteonTX2 SoCs. If unsure, say n
466
Suneel Garapati4684a7a2020-08-26 14:37:42 +0200467config OCTEONTX2_CGX_INTF
468 bool "OcteonTX2 CGX ATF interface support"
469 depends on ARCH_OCTEONTX2
470 default y if ARCH_OCTEONTX2
471 help
472 You must select Y to enable CGX ATF interface support for
473 OcteonTX2 SoCs. If unsure, say n
474
Bin Mengb68fe152015-08-27 22:25:58 -0700475config PCH_GBE
476 bool "Intel Platform Controller Hub EG20T GMAC driver"
477 depends on DM_ETH && DM_PCI
478 select PHYLIB
479 help
480 This MAC is present in Intel Platform Controller Hub EG20T. It
481 supports 10/100/1000 Mbps operation.
482
Mylène Josserand751b0be2017-04-02 12:59:08 +0200483config RGMII
484 bool "Enable RGMII"
485 help
486 Enable the support of the Reduced Gigabit Media-Independent
487 Interface (RGMII).
488
Adam Fordd7869b22018-07-20 23:03:57 -0500489config MII
490 bool "Enable MII"
491 help
492 Enable support of the Media-Independent Interface (MII)
493
Marek Vasutd789a822020-05-17 18:14:17 +0200494config PCNET
495 bool "AMD PCnet series Ethernet controller driver"
496 help
497 This driver supports AMD PCnet series fast ethernet family of
498 PCI chipsets/adapters.
499
Heiko Schocher6e31c622020-02-06 09:48:16 +0100500source "drivers/net/qe/Kconfig"
501
Bin Meng86e9dc82016-03-21 06:47:41 -0700502config RTL8139
503 bool "Realtek 8139 series Ethernet controller driver"
504 help
505 This driver supports Realtek 8139 series fast ethernet family of
506 PCI chipsets/adapters.
507
Bin Meng0764f242016-03-21 06:47:42 -0700508config RTL8169
509 bool "Realtek 8169 series Ethernet controller driver"
510 help
511 This driver supports Realtek 8169 series gigabit ethernet family of
512 PCI/PCIe chipsets/adapters.
513
Adam Ford8daec2d2017-09-05 15:20:44 -0500514config SMC911X
515 bool "SMSC LAN911x and LAN921x controller driver"
516
517if SMC911X
518
Marek Vasut81486932020-03-15 17:39:01 +0100519if !DM_ETH
Adam Ford8daec2d2017-09-05 15:20:44 -0500520config SMC911X_BASE
521 hex "SMC911X Base Address"
522 help
523 Define this to hold the physical address
524 of the device (I/O space)
Marek Vasut81486932020-03-15 17:39:01 +0100525endif #DM_ETH
Adam Ford8daec2d2017-09-05 15:20:44 -0500526
527choice
528 prompt "SMC911X bus width"
529 default SMC911X_16_BIT
530
531config SMC911X_32_BIT
532 bool "Enable 32-bit interface"
533
534config SMC911X_16_BIT
535 bool "Enable 16-bit interface"
536 help
537 Define this if data bus is 16 bits. If your processor
538 automatically converts one 32 bit word to two 16 bit
539 words you may also try CONFIG_SMC911X_32_BIT.
540
541endchoice
542endif #SMC911X
543
Mylène Josserand4d43d062017-04-02 12:59:03 +0200544config SUN7I_GMAC
545 bool "Enable Allwinner GMAC Ethernet support"
546 help
547 Enable the support for Sun7i GMAC Ethernet controller
548
Stefan Mavrodievaba39242017-11-03 08:56:51 +0200549config SUN7I_GMAC_FORCE_TXERR
550 bool "Force PA17 as gmac function"
551 depends on SUN7I_GMAC
552 help
553 Some ethernet phys needs TXERR control. Since the GMAC
554 doesn't have such signal, setting PA17 as GMAC function
555 makes the pin output low, which enables data transmission.
556
Mylène Josserandabc3e4d2017-04-02 12:59:07 +0200557config SUN4I_EMAC
558 bool "Allwinner Sun4i Ethernet MAC support"
559 depends on DM_ETH
Artturi Alm6270a3f2017-11-08 05:08:58 +0200560 select PHYLIB
Mylène Josserandabc3e4d2017-04-02 12:59:07 +0200561 help
562 This driver supports the Allwinner based SUN4I Ethernet MAC.
563
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530564config SUN8I_EMAC
565 bool "Allwinner Sun8i Ethernet MAC support"
566 depends on DM_ETH
567 select PHYLIB
Philipp Tomsich449ea2c2017-03-26 18:50:23 +0200568 select PHY_GIGE
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530569 help
570 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
571 It can be found in H3/A64/A83T based SoCs and compatible with both
Tom Rini7131d2d2017-02-20 09:38:03 -0500572 External and Internal PHYs.
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530573
Nobuhiro Iwamatsudcd18ea2017-12-01 16:08:03 +0900574config SH_ETHER
575 bool "Renesas SH Ethernet MAC"
576 select PHYLIB
577 help
578 This driver supports the Ethernet for Renesas SH and ARM SoCs.
579
Grygorii Strashkoffad5fa2018-10-31 16:21:39 -0500580source "drivers/net/ti/Kconfig"
Adam Fordd7869b22018-07-20 23:03:57 -0500581
Marek Vasuta410f132020-06-20 17:43:29 +0200582config TULIP
583 bool "DEC Tulip DC2114x Ethernet support"
584 depends on (DM_ETH && DM_PCI) || !DM_ETH
585 help
586 This driver supports DEC DC2114x Fast ethernet chips.
587
Michal Simek338a5f22015-12-09 16:54:42 +0100588config XILINX_AXIEMAC
Michal Simek664e16c2020-08-06 15:18:36 +0200589 depends on DM_ETH
Michal Simek338a5f22015-12-09 16:54:42 +0100590 select PHYLIB
591 select MII
592 bool "Xilinx AXI Ethernet"
593 help
594 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
595
Michal Simek3229c862015-12-11 09:41:49 +0100596config XILINX_EMACLITE
Michal Simek664e16c2020-08-06 15:18:36 +0200597 depends on DM_ETH
Michal Simek3229c862015-12-11 09:41:49 +0100598 select PHYLIB
599 select MII
600 bool "Xilinx Ethernetlite"
601 help
602 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
603
Michal Simek596e5782015-11-30 14:34:52 +0100604config ZYNQ_GEM
Michal Simek664e16c2020-08-06 15:18:36 +0200605 depends on DM_ETH
Michal Simek7bccc752015-12-11 09:14:31 +0100606 select PHYLIB
Michal Simek596e5782015-11-30 14:34:52 +0100607 bool "Xilinx Ethernet GEM"
608 help
Michal Simekc9428102015-12-09 16:53:52 +0100609 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
Michal Simek596e5782015-11-30 14:34:52 +0100610
Purna Chandra Mandal23e75782016-01-28 15:30:21 +0530611config PIC32_ETH
612 bool "Microchip PIC32 Ethernet Support"
613 depends on DM_ETH && MACH_PIC32
614 select PHYLIB
615 help
616 This driver implements 10/100 Mbps Ethernet and MAC layer for
617 Microchip PIC32 microcontrollers.
618
Sjoerd Simons0125bcf2017-01-11 11:46:11 +0100619config GMAC_ROCKCHIP
620 bool "Rockchip Synopsys Designware Ethernet MAC"
621 depends on DM_ETH && ETH_DESIGNWARE
622 help
623 This driver provides Rockchip SoCs network support based on the
624 Synopsys Designware driver.
625
Marek Vasut8ae51b62017-05-13 15:54:28 +0200626config RENESAS_RAVB
627 bool "Renesas Ethernet AVB MAC"
628 depends on DM_ETH && RCAR_GEN3
629 select PHYLIB
630 help
631 This driver implements support for the Ethernet AVB block in
632 Renesas M3 and H3 SoCs.
633
Christophe Leroyfad51ac2017-07-06 10:33:23 +0200634config MPC8XX_FEC
635 bool "Fast Ethernet Controller on MPC8XX"
Christophe Leroyee1e6002018-03-16 17:20:41 +0100636 depends on MPC8xx
Christophe Leroyfad51ac2017-07-06 10:33:23 +0200637 select MII
638 help
639 This driver implements support for the Fast Ethernet Controller
640 on MPC8XX
641
Kunihiko Hayashia8927792018-05-24 19:24:37 +0900642config SNI_AVE
643 bool "Socionext AVE Ethernet support"
644 depends on DM_ETH && ARCH_UNIPHIER
645 select PHYLIB
646 select SYSCON
647 select REGMAP
648 help
649 This driver implements support for the Socionext AVE Ethernet
650 controller, as found on the Socionext UniPhier family.
651
Horatiu Vultur4c661572019-01-31 15:30:33 +0100652source "drivers/net/mscc_eswitch/Kconfig"
Gregory CLEMENTc8546162019-01-17 17:07:13 +0100653
Christophe Leroyfad51ac2017-07-06 10:33:23 +0200654config ETHER_ON_FEC1
655 bool "FEC1"
656 depends on MPC8XX_FEC
657 default y
658
659config FEC1_PHY
660 int "FEC1 PHY"
661 depends on ETHER_ON_FEC1
662 default -1
663 help
664 Define to the hardcoded PHY address which corresponds
665 to the given FEC; i. e.
666 #define CONFIG_FEC1_PHY 4
667 means that the PHY with address 4 is connected to FEC1
668
669 When set to -1, means to probe for first available.
670
671config PHY_NORXERR
672 bool "PHY_NORXERR"
673 depends on ETHER_ON_FEC1
674 default n
675 help
676 The PHY does not have a RXERR line (RMII only).
677 (so program the FEC to ignore it).
678
679config ETHER_ON_FEC2
680 bool "FEC2"
681 depends on MPC8XX_FEC && MPC885
682 default y
683
684config FEC2_PHY
685 int "FEC2 PHY"
686 depends on ETHER_ON_FEC2
687 default -1
688 help
689 Define to the hardcoded PHY address which corresponds
690 to the given FEC; i. e.
691 #define CONFIG_FEC1_PHY 4
692 means that the PHY with address 4 is connected to FEC1
693
694 When set to -1, means to probe for first available.
695
696config FEC2_PHY_NORXERR
697 bool "PHY_NORXERR"
698 depends on ETHER_ON_FEC2
699 default n
700 help
701 The PHY does not have a RXERR line (RMII only).
702 (so program the FEC to ignore it).
703
Ahmed Mansour541d5762017-12-15 16:01:01 -0500704config SYS_DPAA_QBMAN
705 bool "Device tree fixup for QBMan on freescale SOCs"
706 depends on (ARM || PPC) && !SPL_BUILD
707 default y if ARCH_B4860 || \
708 ARCH_B4420 || \
709 ARCH_P1023 || \
710 ARCH_P2041 || \
711 ARCH_T1023 || \
712 ARCH_T1024 || \
713 ARCH_T1040 || \
714 ARCH_T1042 || \
715 ARCH_T2080 || \
716 ARCH_T2081 || \
717 ARCH_T4240 || \
718 ARCH_T4160 || \
719 ARCH_P4080 || \
720 ARCH_P3041 || \
721 ARCH_P5040 || \
722 ARCH_P5020 || \
723 ARCH_LS1043A || \
724 ARCH_LS1046A
725 help
726 QBman fixups to allow deep sleep in DPAA 1 SOCs
727
Mario Six17151052018-03-28 14:38:18 +0200728config TSEC_ENET
729 select PHYLIB
730 bool "Enable Three-Speed Ethernet Controller"
731 help
732 This driver implements support for the (Enhanced) Three-Speed
733 Ethernet Controller found on Freescale SoCs.
734
Weijie Gao23f17162018-12-20 16:12:53 +0800735config MEDIATEK_ETH
736 bool "MediaTek Ethernet GMAC Driver"
737 depends on DM_ETH
738 select PHYLIB
739 select DM_GPIO
740 select DM_RESET
741 help
742 This Driver support MediaTek Ethernet GMAC
743 Say Y to enable support for the MediaTek Ethernet GMAC.
744
Shawn Guo1d5b5d22019-03-20 15:32:40 +0800745config HIGMACV300_ETH
746 bool "HiSilicon Gigabit Ethernet Controller"
747 depends on DM_ETH
748 select DM_RESET
749 select PHYLIB
750 help
751 This driver supports HIGMACV300 Ethernet controller found on
752 HiSilicon SoCs.
753
Alex Marginean120b5ef2019-07-03 12:11:40 +0300754config FSL_ENETC
755 bool "NXP ENETC Ethernet controller"
Alex Marginean1d995342019-07-03 12:11:41 +0300756 depends on DM_PCI && DM_ETH && DM_MDIO
Alex Marginean120b5ef2019-07-03 12:11:40 +0300757 help
758 This driver supports the NXP ENETC Ethernet controller found on some
759 of the NXP SoCs.
760
Alex Marginean74dd3832019-07-16 11:21:17 +0300761config MDIO_MUX_I2CREG
762 bool "MDIO MUX accessed as a register over I2C"
763 depends on DM_MDIO_MUX && DM_I2C
764 help
765 This driver is used for MDIO muxes driven by writing to a register of
766 an I2C chip. The board it was developed for uses a mux controlled by
767 on-board FPGA which in turn is accessed as a chip over I2C.
768
Robert Marko975151d2020-10-08 22:05:11 +0200769config MDIO_IPQ4019
770 bool "Qualcomm IPQ4019 MDIO interface support"
771 depends on DM_MDIO
772 help
773 This driver supports the MDIO interface found in Qualcomm
774 IPQ40xx series Soc-s.
775
Alex Marginean8bd37ce2019-07-25 12:33:19 +0300776config MVMDIO
777 bool "Marvell MDIO interface support"
778 depends on DM_MDIO
779 help
780 This driver supports the MDIO interface found in the network
781 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
782 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
783
784 This driver is used by the MVPP2 and MVNETA drivers.
785
Ioana Ciornei52e16ec2020-03-18 16:47:36 +0200786config FSL_LS_MDIO
787 bool "NXP Layerscape MDIO interface support"
788 depends on DM_MDIO
789 help
790 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
791 on the mEMAC (which supports both Clauses 22 and 45).
792
Neil Armstrong6c7bc9f2021-02-24 15:02:23 +0100793config MDIO_MUX_MMIOREG
794 bool "MDIO MUX accessed as a MMIO register access"
795 depends on DM_MDIO_MUX
796 help
797 This driver is used for MDIO muxes driven by writing to a register in
798 the MMIO physical memory.
799
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500800endif # NETDEVICES