blob: eb3d7ed45f09ba52c00562e34e7325aef786090b [file] [log] [blame]
Alexaf2cbfd2017-02-06 19:17:34 -08001source "drivers/net/phy/Kconfig"
Calvin Johnsona802d1e2018-03-08 15:30:35 +05302source "drivers/net/pfe_eth/Kconfig"
Florinel Iordache1bad9912019-05-15 09:09:21 +00003source "drivers/net/fsl-mc/Kconfig"
Alexaf2cbfd2017-02-06 19:17:34 -08004
Joe Hershberger05c3e682015-03-22 17:09:10 -05005config DM_ETH
6 bool "Enable Driver Model for Ethernet drivers"
7 depends on DM
8 help
9 Enable driver model for Ethernet.
10
Joe Hershbergerc25f4062018-07-02 14:47:48 -050011 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
Joe Hershberger05c3e682015-03-22 17:09:10 -050013 Look in include/net.h for details.
Joe Hershberger3ea143a2015-03-22 17:09:13 -050014
Alex Margineanc3452b52019-06-03 19:10:30 +030015config DM_MDIO
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
18 help
19 Enable driver model for MDIO devices
20
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
24 Ethernet interfaces.
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
27
Alex Marginean8880edb2019-07-12 10:13:50 +030028config DM_MDIO_MUX
29 bool "Enable Driver Model for MDIO MUX devices"
30 depends on DM_MDIO
31 help
32 Enable driver model for MDIO MUX devices
33
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
36 the MDIO bus.
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
39
Alex Margineanec9594a2019-06-03 19:12:28 +030040config MDIO_SANDBOX
41 depends on DM_MDIO && SANDBOX
42 default y
43 bool "Sandbox: Mocked MDIO driver"
44 help
45 This driver implements dummy read/write/reset MDIO functions mimicking
46 a bus with a single PHY.
47
48 This driver is used in for testing in test/dm/mdio.c
49
Alex Margineanc3d9f3f2019-07-12 10:13:53 +030050config MDIO_MUX_SANDBOX
51 depends on DM_MDIO_MUX && MDIO_SANDBOX
52 default y
53 bool "Sandbox: Mocked MDIO-MUX driver"
54 help
55 This driver implements dummy select/deselect ops mimicking a MUX on
56 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
57
58 This driver is used for testing in test/dm/mdio.c
59
Joe Hershberger3ea143a2015-03-22 17:09:13 -050060menuconfig NETDEVICES
61 bool "Network device support"
62 depends on NET
Joe Hershbergeref0f2f52015-06-22 16:15:30 -050063 default y if DM_ETH
Joe Hershberger3ea143a2015-03-22 17:09:13 -050064 help
65 You must select Y to enable any network device support
66 Generally if you have any networking support this is a given
67
68 If unsure, say Y
69
70if NETDEVICES
71
Philipp Tomsich449ea2c2017-03-26 18:50:23 +020072config PHY_GIGE
73 bool "Enable GbE PHY status parsing and configuration"
74 help
75 Enables support for parsing the status output and for
76 configuring GbE PHYs (affects the inner workings of some
77 commands and miiphyutil.c).
78
Marek Vasute40095f2016-05-24 23:29:09 +020079config AG7XXX
80 bool "Atheros AG7xxx Ethernet MAC support"
81 depends on DM_ETH && ARCH_ATH79
82 select PHYLIB
83 help
84 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
85 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
86
87
Thomas Chou96fa1e42015-10-22 15:29:11 +080088config ALTERA_TSE
89 bool "Altera Triple-Speed Ethernet MAC support"
90 depends on DM_ETH
91 select PHYLIB
92 help
93 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
94 Please find details on the "Triple-Speed Ethernet MegaCore Function
95 Resource Center" of Altera.
96
Suji Velupillaic89782d2017-07-10 14:05:41 -070097config BCM_SF2_ETH
98 bool "Broadcom SF2 (Starfighter2) Ethernet support"
99 select PHYLIB
100 help
101 This is an abstract framework which provides a generic interface
102 to MAC and DMA management for multiple Broadcom SoCs such as
103 Cygnus, NSP and bcm28155_ap platforms.
104
105config BCM_SF2_ETH_DEFAULT_PORT
106 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
107 depends on BCM_SF2_ETH
108 default 0
109 help
110 Default port number for the Starfighter2 ethernet driver.
111
112config BCM_SF2_ETH_GMAC
113 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
114 depends on BCM_SF2_ETH
115 help
116 This flag enables the ethernet support for Broadcom platforms with
117 GMAC such as Cygnus. This driver is based on the framework provided
118 by the BCM_SF2_ETH driver.
119 Say Y to any bcmcygnus based platforms.
120
Álvaro Fernández Rojas55e55fe2018-12-01 19:00:24 +0100121config BCM6348_ETH
122 bool "BCM6348 EMAC support"
123 depends on DM_ETH && ARCH_BMIPS
124 select DMA
125 select DMA_CHANNELS
126 select MII
127 select PHYLIB
128 help
129 This driver supports the BCM6348 Ethernet MAC.
130
Álvaro Fernández Rojas96229722018-12-01 19:00:32 +0100131config BCM6368_ETH
132 bool "BCM6368 EMAC support"
133 depends on DM_ETH && ARCH_BMIPS
134 select DMA
135 select MII
136 help
137 This driver supports the BCM6368 Ethernet MAC.
138
Stephen Warrenba4dfef2016-10-21 14:46:47 -0600139config DWC_ETH_QOS
140 bool "Synopsys DWC Ethernet QOS device support"
141 depends on DM_ETH
142 select PHYLIB
143 help
144 This driver supports the Synopsys Designware Ethernet QOS (Quality
145 Of Service) IP block. The IP supports many options for bus type,
146 clocking/reset structure, and feature list. This driver currently
147 supports the specific configuration used in NVIDIA's Tegra186 chip,
148 but should be extensible to other combinations quite easily.
149
Simon Glassc294ac52015-08-19 09:33:41 -0600150config E1000
151 bool "Intel PRO/1000 Gigabit Ethernet support"
152 help
153 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
154 adapters. For more information on how to identify your adapter, go
155 to the Adapter & Driver ID Guide at:
156
157 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
158
159config E1000_SPI_GENERIC
160 bool "Allow access to the Intel 8257x SPI bus"
161 depends on E1000
162 help
163 Allow generic access to the SPI bus on the Intel 8257x, for
164 example with the "sspi" command.
165
166config E1000_SPI
167 bool "Enable SPI bus utility code"
168 depends on E1000
169 help
170 Utility code for direct access to the SPI bus on Intel 8257x.
171 This does not do anything useful unless you set at least one
172 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
173
174config CMD_E1000
175 bool "Enable the e1000 command"
176 depends on E1000
177 help
178 This enables the 'e1000' management command for E1000 devices. When
179 used on devices with SPI support you can reprogram the EEPROM from
180 U-Boot.
181
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500182config ETH_SANDBOX
183 depends on DM_ETH && SANDBOX
184 default y
185 bool "Sandbox: Mocked Ethernet driver"
186 help
187 This driver simply responds with fake ARP replies and ping
188 replies that are used to verify network stack functionality
189
190 This driver is particularly useful in the test/dm/eth.c tests
191
Joe Hershbergera346ca72015-03-22 17:09:21 -0500192config ETH_SANDBOX_RAW
193 depends on DM_ETH && SANDBOX
194 default y
195 bool "Sandbox: Bridge to Linux Raw Sockets"
196 help
197 This driver is a bridge from the bottom of the network stack
198 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
199 network traffic to be tested from within sandbox. See
Keerthy5917d0b2019-07-29 13:52:04 +0530200 doc/arch/index.rst for more details.
Joe Hershbergera346ca72015-03-22 17:09:21 -0500201
Simon Glassef48f6d2015-04-05 16:07:34 -0600202config ETH_DESIGNWARE
203 bool "Synopsys Designware Ethernet MAC"
Thomas Chou25af71c2015-12-07 20:53:29 +0800204 select PHYLIB
Simon Goldschmidt6fb1eb12019-01-13 19:58:41 +0100205 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
Simon Glassef48f6d2015-04-05 16:07:34 -0600206 help
207 This MAC is present in SoCs from various vendors. It supports
208 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
209 provide the PHY (physical media interface).
210
Marek Vasut215a0652018-08-13 19:32:14 +0200211config ETH_DESIGNWARE_SOCFPGA
Simon Goldschmidt4f1267c2019-01-13 19:58:40 +0100212 select REGMAP
213 select SYSCON
Marek Vasut215a0652018-08-13 19:32:14 +0200214 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
215 depends on DM_ETH && ETH_DESIGNWARE
216 help
217 The Altera SoCFPGA requires additional configuration of the
218 Altera system manager to correctly interface with the PHY.
219 This code handles those SoC specifics.
220
Max Filippovf0727122016-08-05 18:26:15 +0300221config ETHOC
222 bool "OpenCores 10/100 Mbps Ethernet MAC"
223 help
224 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
225
Peng Fanfbada482018-03-28 20:54:14 +0800226config FEC_MXC_SHARE_MDIO
227 bool "Share the MDIO bus for FEC controller"
228 depends on FEC_MXC
229
230config FEC_MXC_MDIO_BASE
231 hex "MDIO base address for the FEC controller"
232 depends on FEC_MXC_SHARE_MDIO
233 help
234 This specifies the MDIO registers base address. It is used when
235 two FEC controllers share MDIO bus.
236
Jagan Teki97d29ca2016-10-08 18:00:12 +0530237config FEC_MXC
238 bool "FEC Ethernet controller"
Lukasz Majewski7782f4e2019-06-19 17:31:03 +0200239 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || VF610
Jagan Teki97d29ca2016-10-08 18:00:12 +0530240 help
241 This driver supports the 10/100 Fast Ethernet controller for
242 NXP i.MX processors.
243
Tom Rinicc1e98b2019-05-12 07:59:12 -0400244config FMAN_ENET
245 bool "Freescale FMan ethernet support"
246 depends on ARM || PPC
247 help
248 This driver support the Freescale FMan Ethernet controller
249
Tom Rini8dc1b172017-05-26 11:18:53 -0400250config FTMAC100
251 bool "Ftmac100 Ethernet Support"
252 help
253 This MAC is present in Andestech SoCs.
254
Cédric Le Goaterf95de0b2018-10-29 07:06:31 +0100255config FTGMAC100
256 bool "Ftgmac100 Ethernet Support"
257 depends on DM_ETH
258 select PHYLIB
259 help
260 This driver supports the Faraday's FTGMAC100 Gigabit SoC
261 Ethernet controller that can be found on Aspeed SoCs (which
262 include NCSI).
263
264 It is fully compliant with IEEE 802.3 specification for
265 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
266 Mbps Ethernet and includes Reduced Media Independent
267 Interface (RMII) and Reduced Gigabit Media Independent
268 Interface (RGMII) interfaces. It adopts an AHB bus interface
269 and integrates a link list DMA engine with direct M-Bus
270 accesses for transmitting and receiving packets. It has
271 independent TX/RX fifos, supports half and full duplex (1000
272 Mbps mode only supports full duplex), flow control for full
273 duplex and backpressure for half duplex.
274
275 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
276 and supports IEEE 802.1Q VLAN tag insertion and removal. It
277 offers high-priority transmit queue for QoS and CoS
278 applications.
279
280
Chris Packhamed52ea52018-05-03 23:00:35 +1200281config MVGBE
282 bool "Marvell Orion5x/Kirkwood network interface support"
283 depends on KIRKWOOD || ORION5X
Chris Packhamfb731072018-07-09 21:34:00 +1200284 select PHYLIB if DM_ETH
Chris Packhamed52ea52018-05-03 23:00:35 +1200285 help
286 This driver supports the network interface units in the
287 Marvell Orion5x and Kirkwood SoCs
288
Chris Packham7654f622017-08-21 20:17:03 +1200289config MVNETA
Miquel Raynale7ab2cc2017-12-28 15:43:09 +0100290 bool "Marvell Armada XP/385/3700 network interface support"
291 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
Chris Packham7654f622017-08-21 20:17:03 +1200292 select PHYLIB
293 help
294 This driver supports the network interface units in the
Miquel Raynale7ab2cc2017-12-28 15:43:09 +0100295 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
Chris Packham7654f622017-08-21 20:17:03 +1200296
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100297config MVPP2
Stefan Roesee7935c42017-02-15 11:42:59 +0100298 bool "Marvell Armada 375/7K/8K network interface support"
299 depends on ARMADA_375 || ARMADA_8K
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100300 select PHYLIB
301 help
302 This driver supports the network interface units in the
Stefan Roesee7935c42017-02-15 11:42:59 +0100303 Marvell ARMADA 375, 7K and 8K SoCs.
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100304
Wenyou Yangebcb40a2016-11-02 10:06:55 +0800305config MACB
306 bool "Cadence MACB/GEM Ethernet Interface"
307 depends on DM_ETH
308 select PHYLIB
309 help
310 The Cadence MACB ethernet interface is found on many Atmel
311 AT91 and SAMA5 parts. This driver also supports the Cadence
312 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
313 Say Y to include support for the MACB/GEM chip.
314
Wilson Lee4bf56912017-08-22 20:25:07 -0700315config MACB_ZYNQ
316 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
317 depends on MACB
318 help
319 The Cadence MACB ethernet interface was used on Zynq platform.
320 Say Y to enable support for the MACB/GEM in Zynq chip.
321
Stefan Roesec895ef42018-10-26 14:53:27 +0200322config MT7628_ETH
323 bool "MediaTek MT7628 Ethernet Interface"
Weijie Gao16b94902019-04-30 11:13:58 +0800324 depends on SOC_MT7628
Weijie Gaof0793212019-09-25 17:45:33 +0800325 select PHYLIB
Stefan Roesec895ef42018-10-26 14:53:27 +0200326 help
327 The MediaTek MT7628 ethernet interface is used on MT7628 and
328 MT7688 based boards.
329
Bin Mengb68fe152015-08-27 22:25:58 -0700330config PCH_GBE
331 bool "Intel Platform Controller Hub EG20T GMAC driver"
332 depends on DM_ETH && DM_PCI
333 select PHYLIB
334 help
335 This MAC is present in Intel Platform Controller Hub EG20T. It
336 supports 10/100/1000 Mbps operation.
337
Mylène Josserand751b0be2017-04-02 12:59:08 +0200338config RGMII
339 bool "Enable RGMII"
340 help
341 Enable the support of the Reduced Gigabit Media-Independent
342 Interface (RGMII).
343
Adam Fordd7869b22018-07-20 23:03:57 -0500344config MII
345 bool "Enable MII"
346 help
347 Enable support of the Media-Independent Interface (MII)
348
Bin Meng86e9dc82016-03-21 06:47:41 -0700349config RTL8139
350 bool "Realtek 8139 series Ethernet controller driver"
351 help
352 This driver supports Realtek 8139 series fast ethernet family of
353 PCI chipsets/adapters.
354
Bin Meng0764f242016-03-21 06:47:42 -0700355config RTL8169
356 bool "Realtek 8169 series Ethernet controller driver"
357 help
358 This driver supports Realtek 8169 series gigabit ethernet family of
359 PCI/PCIe chipsets/adapters.
360
Adam Ford8daec2d2017-09-05 15:20:44 -0500361config SMC911X
362 bool "SMSC LAN911x and LAN921x controller driver"
363
364if SMC911X
365
366config SMC911X_BASE
367 hex "SMC911X Base Address"
368 help
369 Define this to hold the physical address
370 of the device (I/O space)
371
372choice
373 prompt "SMC911X bus width"
374 default SMC911X_16_BIT
375
376config SMC911X_32_BIT
377 bool "Enable 32-bit interface"
378
379config SMC911X_16_BIT
380 bool "Enable 16-bit interface"
381 help
382 Define this if data bus is 16 bits. If your processor
383 automatically converts one 32 bit word to two 16 bit
384 words you may also try CONFIG_SMC911X_32_BIT.
385
386endchoice
387endif #SMC911X
388
Mylène Josserand4d43d062017-04-02 12:59:03 +0200389config SUN7I_GMAC
390 bool "Enable Allwinner GMAC Ethernet support"
391 help
392 Enable the support for Sun7i GMAC Ethernet controller
393
Stefan Mavrodievaba39242017-11-03 08:56:51 +0200394config SUN7I_GMAC_FORCE_TXERR
395 bool "Force PA17 as gmac function"
396 depends on SUN7I_GMAC
397 help
398 Some ethernet phys needs TXERR control. Since the GMAC
399 doesn't have such signal, setting PA17 as GMAC function
400 makes the pin output low, which enables data transmission.
401
Mylène Josserandabc3e4d2017-04-02 12:59:07 +0200402config SUN4I_EMAC
403 bool "Allwinner Sun4i Ethernet MAC support"
404 depends on DM_ETH
Artturi Alm6270a3f2017-11-08 05:08:58 +0200405 select PHYLIB
Mylène Josserandabc3e4d2017-04-02 12:59:07 +0200406 help
407 This driver supports the Allwinner based SUN4I Ethernet MAC.
408
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530409config SUN8I_EMAC
410 bool "Allwinner Sun8i Ethernet MAC support"
411 depends on DM_ETH
412 select PHYLIB
Philipp Tomsich449ea2c2017-03-26 18:50:23 +0200413 select PHY_GIGE
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530414 help
415 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
416 It can be found in H3/A64/A83T based SoCs and compatible with both
Tom Rini7131d2d2017-02-20 09:38:03 -0500417 External and Internal PHYs.
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530418
Nobuhiro Iwamatsudcd18ea2017-12-01 16:08:03 +0900419config SH_ETHER
420 bool "Renesas SH Ethernet MAC"
421 select PHYLIB
422 help
423 This driver supports the Ethernet for Renesas SH and ARM SoCs.
424
Grygorii Strashkoffad5fa2018-10-31 16:21:39 -0500425source "drivers/net/ti/Kconfig"
Adam Fordd7869b22018-07-20 23:03:57 -0500426
Michal Simek338a5f22015-12-09 16:54:42 +0100427config XILINX_AXIEMAC
428 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
429 select PHYLIB
430 select MII
431 bool "Xilinx AXI Ethernet"
432 help
433 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
434
Michal Simek3229c862015-12-11 09:41:49 +0100435config XILINX_EMACLITE
Zubair Lutfullah Kakakhel2f1f05f2016-07-27 12:25:09 +0100436 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
Michal Simek3229c862015-12-11 09:41:49 +0100437 select PHYLIB
438 select MII
439 bool "Xilinx Ethernetlite"
440 help
441 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
442
Michal Simek596e5782015-11-30 14:34:52 +0100443config ZYNQ_GEM
Michal Simekec48b6c2018-08-22 14:55:27 +0200444 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
Michal Simek7bccc752015-12-11 09:14:31 +0100445 select PHYLIB
Michal Simek596e5782015-11-30 14:34:52 +0100446 bool "Xilinx Ethernet GEM"
447 help
Michal Simekc9428102015-12-09 16:53:52 +0100448 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
Michal Simek596e5782015-11-30 14:34:52 +0100449
Purna Chandra Mandal23e75782016-01-28 15:30:21 +0530450config PIC32_ETH
451 bool "Microchip PIC32 Ethernet Support"
452 depends on DM_ETH && MACH_PIC32
453 select PHYLIB
454 help
455 This driver implements 10/100 Mbps Ethernet and MAC layer for
456 Microchip PIC32 microcontrollers.
457
Sjoerd Simons0125bcf2017-01-11 11:46:11 +0100458config GMAC_ROCKCHIP
459 bool "Rockchip Synopsys Designware Ethernet MAC"
460 depends on DM_ETH && ETH_DESIGNWARE
461 help
462 This driver provides Rockchip SoCs network support based on the
463 Synopsys Designware driver.
464
Marek Vasut8ae51b62017-05-13 15:54:28 +0200465config RENESAS_RAVB
466 bool "Renesas Ethernet AVB MAC"
467 depends on DM_ETH && RCAR_GEN3
468 select PHYLIB
469 help
470 This driver implements support for the Ethernet AVB block in
471 Renesas M3 and H3 SoCs.
472
Christophe Leroyfad51ac2017-07-06 10:33:23 +0200473config MPC8XX_FEC
474 bool "Fast Ethernet Controller on MPC8XX"
Christophe Leroyee1e6002018-03-16 17:20:41 +0100475 depends on MPC8xx
Christophe Leroyfad51ac2017-07-06 10:33:23 +0200476 select MII
477 help
478 This driver implements support for the Fast Ethernet Controller
479 on MPC8XX
480
Kunihiko Hayashia8927792018-05-24 19:24:37 +0900481config SNI_AVE
482 bool "Socionext AVE Ethernet support"
483 depends on DM_ETH && ARCH_UNIPHIER
484 select PHYLIB
485 select SYSCON
486 select REGMAP
487 help
488 This driver implements support for the Socionext AVE Ethernet
489 controller, as found on the Socionext UniPhier family.
490
Horatiu Vultur4c661572019-01-31 15:30:33 +0100491source "drivers/net/mscc_eswitch/Kconfig"
Gregory CLEMENTc8546162019-01-17 17:07:13 +0100492
Christophe Leroyfad51ac2017-07-06 10:33:23 +0200493config ETHER_ON_FEC1
494 bool "FEC1"
495 depends on MPC8XX_FEC
496 default y
497
498config FEC1_PHY
499 int "FEC1 PHY"
500 depends on ETHER_ON_FEC1
501 default -1
502 help
503 Define to the hardcoded PHY address which corresponds
504 to the given FEC; i. e.
505 #define CONFIG_FEC1_PHY 4
506 means that the PHY with address 4 is connected to FEC1
507
508 When set to -1, means to probe for first available.
509
510config PHY_NORXERR
511 bool "PHY_NORXERR"
512 depends on ETHER_ON_FEC1
513 default n
514 help
515 The PHY does not have a RXERR line (RMII only).
516 (so program the FEC to ignore it).
517
518config ETHER_ON_FEC2
519 bool "FEC2"
520 depends on MPC8XX_FEC && MPC885
521 default y
522
523config FEC2_PHY
524 int "FEC2 PHY"
525 depends on ETHER_ON_FEC2
526 default -1
527 help
528 Define to the hardcoded PHY address which corresponds
529 to the given FEC; i. e.
530 #define CONFIG_FEC1_PHY 4
531 means that the PHY with address 4 is connected to FEC1
532
533 When set to -1, means to probe for first available.
534
535config FEC2_PHY_NORXERR
536 bool "PHY_NORXERR"
537 depends on ETHER_ON_FEC2
538 default n
539 help
540 The PHY does not have a RXERR line (RMII only).
541 (so program the FEC to ignore it).
542
Ahmed Mansour541d5762017-12-15 16:01:01 -0500543config SYS_DPAA_QBMAN
544 bool "Device tree fixup for QBMan on freescale SOCs"
545 depends on (ARM || PPC) && !SPL_BUILD
546 default y if ARCH_B4860 || \
547 ARCH_B4420 || \
548 ARCH_P1023 || \
549 ARCH_P2041 || \
550 ARCH_T1023 || \
551 ARCH_T1024 || \
552 ARCH_T1040 || \
553 ARCH_T1042 || \
554 ARCH_T2080 || \
555 ARCH_T2081 || \
556 ARCH_T4240 || \
557 ARCH_T4160 || \
558 ARCH_P4080 || \
559 ARCH_P3041 || \
560 ARCH_P5040 || \
561 ARCH_P5020 || \
562 ARCH_LS1043A || \
563 ARCH_LS1046A
564 help
565 QBman fixups to allow deep sleep in DPAA 1 SOCs
566
Mario Six17151052018-03-28 14:38:18 +0200567config TSEC_ENET
568 select PHYLIB
569 bool "Enable Three-Speed Ethernet Controller"
570 help
571 This driver implements support for the (Enhanced) Three-Speed
572 Ethernet Controller found on Freescale SoCs.
573
Weijie Gao23f17162018-12-20 16:12:53 +0800574config MEDIATEK_ETH
575 bool "MediaTek Ethernet GMAC Driver"
576 depends on DM_ETH
577 select PHYLIB
578 select DM_GPIO
579 select DM_RESET
580 help
581 This Driver support MediaTek Ethernet GMAC
582 Say Y to enable support for the MediaTek Ethernet GMAC.
583
Shawn Guo1d5b5d22019-03-20 15:32:40 +0800584config HIGMACV300_ETH
585 bool "HiSilicon Gigabit Ethernet Controller"
586 depends on DM_ETH
587 select DM_RESET
588 select PHYLIB
589 help
590 This driver supports HIGMACV300 Ethernet controller found on
591 HiSilicon SoCs.
592
Alex Marginean120b5ef2019-07-03 12:11:40 +0300593config FSL_ENETC
594 bool "NXP ENETC Ethernet controller"
Alex Marginean1d995342019-07-03 12:11:41 +0300595 depends on DM_PCI && DM_ETH && DM_MDIO
Alex Marginean120b5ef2019-07-03 12:11:40 +0300596 help
597 This driver supports the NXP ENETC Ethernet controller found on some
598 of the NXP SoCs.
599
Alex Marginean74dd3832019-07-16 11:21:17 +0300600config MDIO_MUX_I2CREG
601 bool "MDIO MUX accessed as a register over I2C"
602 depends on DM_MDIO_MUX && DM_I2C
603 help
604 This driver is used for MDIO muxes driven by writing to a register of
605 an I2C chip. The board it was developed for uses a mux controlled by
606 on-board FPGA which in turn is accessed as a chip over I2C.
607
Alex Marginean8bd37ce2019-07-25 12:33:19 +0300608config MVMDIO
609 bool "Marvell MDIO interface support"
610 depends on DM_MDIO
611 help
612 This driver supports the MDIO interface found in the network
613 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
614 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
615
616 This driver is used by the MVPP2 and MVNETA drivers.
617
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500618endif # NETDEVICES