blob: 52cf1333f7973efae018b2c6ffbbd528a774cf2a [file] [log] [blame]
wdenk983fda82004-10-28 00:09:35 +00001/*
2 * (C) Copyright 2004, Freescale, Inc
3 * TsiChung Liew, Tsi-Chung.Liew@freescale.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25DESCRIPTION
26Read Dram spd and base on its information to calculate the memory size,
27characteristics to initialize the dram on MPC8220
28*/
29
30#include <common.h>
31#include <mpc8220.h>
32#include "i2cCore.h"
33#include "dramSetup.h"
34
Wolfgang Denkd87080b2006-03-31 18:32:53 +020035DECLARE_GLOBAL_DATA_PTR;
36
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020037#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE
38#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
39#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS
wdenk983fda82004-10-28 00:09:35 +000040
41int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
42{
43 int i;
44
45 for (i = 0; i < I2C_POLL_COUNT; i++) {
46 if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
47 return (OK);
48 }
49
50 return (ERROR);
51}
52
53int spd_clear (volatile i2c8220_t * pi2c)
54{
55 pi2c->adr = 0;
56 pi2c->fdr = 0;
57 pi2c->cr = 0;
58 pi2c->sr = 0;
59
60 return (OK);
61}
62
63int spd_stop (volatile i2c8220_t * pi2c)
64{
65 pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
66 if (spd_status (pi2c, I2C_STA_BB, 0) != OK)
67 return ERROR;
68
69 return (OK);
70}
71
72int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index)
73{
74 pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
75 *readb = pi2c->dr; /* Read a byte */
76
77 /*
78 Set I2C_CTRL_TXAK will cause Transfer pending and
79 set I2C_CTRL_STA will cause Interrupt pending
80 */
81 if (*index != 2) {
82 if (spd_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
83 return ERROR;
84 }
85
86 if (*index != 1) {
87 if (spd_status (pi2c, I2C_STA_IF, 1) != OK)
88 return ERROR;
89 }
90
91 return (OK);
92}
93
94int readSpdData (u8 * spdData)
95{
wdenk983fda82004-10-28 00:09:35 +000096 volatile i2c8220_t *pi2cReg;
97 volatile pcfg8220_t *pcfg;
98 u8 slvAdr = DRAM_SPD;
99 u8 Tmp;
100 int Length = SPD_SIZE;
101 int i = 0;
102
103 /* Enable Port Configuration for SDA and SDL signals */
104 pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
105 __asm__ ("sync");
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106 pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
wdenk983fda82004-10-28 00:09:35 +0000107 __asm__ ("sync");
108
109 /* Points the structure to I2c mbar memory offset */
110 pi2cReg = (volatile i2c8220_t *) (MMAP_I2C);
111
112
113 /* Clear FDR, ADR, SR and CR reg */
114 pi2cReg->adr = 0;
115 pi2cReg->fdr = 0;
116 pi2cReg->cr = 0;
117 pi2cReg->sr = 0;
118
119 /* Set for fix XLB Bus Frequency */
120 switch (gd->bus_clk) {
121 case 60000000:
122 pi2cReg->fdr = 0x15;
123 break;
124 case 70000000:
125 pi2cReg->fdr = 0x16;
126 break;
127 case 80000000:
128 pi2cReg->fdr = 0x3a;
129 break;
130 case 90000000:
131 pi2cReg->fdr = 0x17;
132 break;
133 case 100000000:
134 pi2cReg->fdr = 0x3b;
135 break;
136 case 110000000:
137 pi2cReg->fdr = 0x18;
138 break;
139 case 120000000:
140 pi2cReg->fdr = 0x19;
141 break;
142 case 130000000:
143 pi2cReg->fdr = 0x1a;
144 break;
145 }
146
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147 pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
wdenk983fda82004-10-28 00:09:35 +0000148
149 pi2cReg->cr = I2C_CTL_EN; /* Set Enable */
150
151 /*
152 The I2C bus should be in Idle state. If the bus is busy,
153 clear the STA bit in control register
154 */
155 if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) {
156 if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA)
157 pi2cReg->cr &= ~I2C_CTL_STA;
158
159 /* Check again if it is still busy, return error if found */
160 if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK)
161 return ERROR;
162 }
163
164 pi2cReg->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
165 pi2cReg->cr |= I2C_CTL_STA; /* Generate start signal */
166
167 if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK)
168 return ERROR;
169
170
171 /* Write slave address */
172 pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
173 pi2cReg->dr = slvAdr; /* Write a byte */
174
175 if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
176 spd_stop (pi2cReg);
177 return ERROR;
178 }
179
180 if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
181 spd_stop (pi2cReg);
182 return ERROR;
183 }
184
185
186 /* Issue the offset to start */
187 pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
188 pi2cReg->dr = 0; /* Write a byte */
189
190 if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
191 spd_stop (pi2cReg);
192 return ERROR;
193 }
194
195 if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
196 spd_stop (pi2cReg);
197 return ERROR;
198 }
199
200
201 /* Set repeat start */
202 pi2cReg->cr |= I2C_CTL_RSTA; /* Repeat Start */
203
204 pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
205 pi2cReg->dr = slvAdr | 1; /* Write a byte */
206
207 if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
208 spd_stop (pi2cReg);
209 return ERROR;
210 }
211
212 if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
213 spd_stop (pi2cReg);
214 return ERROR;
215 }
216
217 if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
218 return ERROR;
219
220 pi2cReg->cr &= ~I2C_CTL_TX; /* Set receive mode */
221
222 if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
223 return ERROR;
224
225 /* Dummy Read */
226 if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) {
227 spd_stop (pi2cReg);
228 return ERROR;
229 }
230
231 i = 0;
232 while (Length) {
233 if (Length == 2)
234 pi2cReg->cr |= I2C_CTL_TXAK;
235
236 if (Length == 1)
237 pi2cReg->cr &= ~I2C_CTL_STA;
238
239 if (spd_readbyte (pi2cReg, spdData, &Length) != OK) {
240 return spd_stop (pi2cReg);
241 }
242 i++;
243 Length--;
244 spdData++;
245 }
246
247 /* Stop the service */
248 spd_stop (pi2cReg);
249
250 return OK;
251}
252
253int getBankInfo (int bank, draminfo_t * pBank)
254{
255 int status;
256 int checksum;
257 int count;
258 u8 spdData[SPD_SIZE];
259
260
261 if (bank > 2 || pBank == 0) {
262 /* illegal values */
263 return (-42);
264 }
265
266 status = readSpdData (&spdData[0]);
267 if (status < 0)
268 return (-1);
269
270 /* check the checksum */
271 for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++)
272 checksum += spdData[count];
273
274 checksum = checksum - ((checksum / 256) * 256);
275
276 if (checksum != spdData[LOC_CHECKSUM])
277 return (-2);
278
279 /* Get the memory type */
280 if (!
281 ((spdData[LOC_TYPE] == TYPE_DDR)
282 || (spdData[LOC_TYPE] == TYPE_SDR)))
283 /* not one of the types we support */
284 return (-3);
285
286 pBank->type = spdData[LOC_TYPE];
287
288 /* Set logical banks */
289 pBank->banks = spdData[LOC_LOGICAL_BANKS];
290
291 /* Check that we have enough physical banks to cover the bank we are
292 * figuring out. Odd-numbered banks correspond to the second bank
293 * on the device.
294 */
295 if (bank & 1) {
296 /* Second bank of a "device" */
297 if (spdData[LOC_PHYS_BANKS] < 2)
298 /* this bank doesn't exist on the "device" */
299 return (-4);
300
301 if (spdData[LOC_ROWS] & 0xf0)
302 /* Two asymmetric banks */
303 pBank->rows = spdData[LOC_ROWS] >> 4;
304 else
305 pBank->rows = spdData[LOC_ROWS];
306
307 if (spdData[LOC_COLS] & 0xf0)
308 /* Two asymmetric banks */
309 pBank->cols = spdData[LOC_COLS] >> 4;
310 else
311 pBank->cols = spdData[LOC_COLS];
312 } else {
313 /* First bank of a "device" */
314 pBank->rows = spdData[LOC_ROWS];
315 pBank->cols = spdData[LOC_COLS];
316 }
317
318 pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW];
319 pBank->bursts = spdData[LOC_BURSTS];
320 pBank->CAS = spdData[LOC_CAS];
321 pBank->CS = spdData[LOC_CS];
322 pBank->WE = spdData[LOC_WE];
323 pBank->Trp = spdData[LOC_Trp];
324 pBank->Trcd = spdData[LOC_Trcd];
325 pBank->buffered = spdData[LOC_Buffered] & 1;
326 pBank->refresh = spdData[LOC_REFRESH];
327
328 return (0);
329}
330
331
332/* checkMuxSetting -- given a row/column device geometry, return a mask
333 * of the valid DRAM controller addr_mux settings for
334 * that geometry.
335 *
336 * Arguments: u8 rows: number of row addresses in this device
337 * u8 columns: number of column addresses in this device
338 *
339 * Returns: a mask of the allowed addr_mux settings for this
340 * geometry. Each bit in the mask represents a
341 * possible addr_mux settings (for example, the
342 * (1<<2) bit in the mask represents the 0b10 setting)/
343 *
344 */
345u8 checkMuxSetting (u8 rows, u8 columns)
346{
347 muxdesc_t *pIdx, *pMux;
348 u8 mask;
349 int lrows, lcolumns;
350 u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff };
351
352 /* Setup MuxDescriptor in SRAM space */
353 /* MUXDESC AddressRuns [] = {
354 { 0, 8, 12, 4 }, / setting, columns, rows, extra columns /
355 { 1, 8, 13, 3 }, / setting, columns, rows, extra columns /
356 { 2, 8, 14, 2 }, / setting, columns, rows, extra columns /
357 { 0xff } / list terminator /
358 }; */
359
360 pIdx = (muxdesc_t *) & mux[0];
361
362 /* Check rows x columns against each possible address mux setting */
363 for (pMux = pIdx, mask = 0;; pMux++) {
364 lrows = rows;
365 lcolumns = columns;
366
367 if (pMux->MuxValue == 0xff)
368 break; /* end of list */
369
370 /* For a given mux setting, since we want all the memory in a
371 * device to be contiguous, we want the device "use up" the
372 * address lines such that there are no extra column or row
373 * address lines on the device.
374 */
375
376 lcolumns -= pMux->Columns;
377 if (lcolumns < 0)
378 /* Not enough columns to get to the rows */
379 continue;
380
381 lrows -= pMux->Rows;
382 if (lrows > 0)
383 /* we have extra rows left -- can't do that! */
384 continue;
385
386 /* At this point, we either have to have used up all the
387 * rows or we have to have no columns left.
388 */
389
390 if (lcolumns != 0 && lrows != 0)
391 /* rows AND columns are left. Bad! */
392 continue;
393
394 lcolumns -= pMux->MoreColumns;
395
396 if (lcolumns <= 0)
397 mask |= (1 << pMux->MuxValue);
398 }
399
400 return (mask);
401}
402
403
404u32 dramSetup (void)
405{
wdenk983fda82004-10-28 00:09:35 +0000406 draminfo_t DramInfo[TOTAL_BANK];
407 draminfo_t *pDramInfo;
408 u32 size, temp, cfg_value, mode_value, refresh;
409 u8 *ptr;
410 u8 bursts, Trp, Trcd, type, buffered;
411 u8 muxmask, rows, columns;
412 int count, banknum;
413 u32 *prefresh, *pIdx;
414 u32 refrate[8] = { 15625, 3900, 7800, 31300,
415 62500, 125000, 0xffffffff, 0xffffffff
416 };
417 volatile sysconf8220_t *sysconf;
418 volatile memctl8220_t *memctl;
419
420 sysconf = (volatile sysconf8220_t *) MMAP_MBAR;
421 memctl = (volatile memctl8220_t *) MMAP_MEMCTL;
422
423 /* Set everything in the descriptions to zero */
424 ptr = (u8 *) & DramInfo[0];
425 for (count = 0; count < sizeof (DramInfo); count++)
426 *ptr++ = 0;
427
428 for (banknum = 0; banknum < TOTAL_BANK; banknum++)
429 sysconf->cscfg[banknum];
430
431 /* Descriptions of row/column address muxing for various
432 * addr_mux settings.
433 */
434
435 pIdx = prefresh = (u32 *) & refrate[0];
436
437 /* Get all the info for all three logical banks */
438 bursts = 0xff;
439 Trp = 0;
440 Trcd = 0;
441 type = 0;
442 buffered = 0xff;
443 refresh = 0xffffffff;
444 muxmask = 0xff;
445
446 /* Two bank, CS0 and CS1 */
447 for (banknum = 0, pDramInfo = &DramInfo[0];
448 banknum < TOTAL_BANK; banknum++, pDramInfo++) {
449 pDramInfo->ordinal = banknum; /* initial sorting */
450 if (getBankInfo (banknum, pDramInfo) < 0)
451 continue;
452
453 /* get cumulative parameters of all three banks */
454 if (type && pDramInfo->type != type)
455 return 0;
456
457 type = pDramInfo->type;
458 rows = pDramInfo->rows;
459 columns = pDramInfo->cols;
460
461 /* This chip only supports 13 DRAM memory lines, but some devices
462 * have 14 rows. To deal with this, ignore the 14th address line
463 * by limiting the number of rows (and columns) to 13. This will
464 * mean that for 14-row devices we will only be able to use
465 * half of the memory, but it's better than nothing.
466 */
467 if (rows > 13)
468 rows = 13;
469 if (columns > 13)
470 columns = 13;
471
472 pDramInfo->size =
473 ((1 << (rows + columns)) * pDramInfo->width);
474 pDramInfo->size *= pDramInfo->banks;
475 pDramInfo->size >>= 3;
476
477 /* figure out which addr_mux configurations will support this device */
478 muxmask &= checkMuxSetting (rows, columns);
479 if (muxmask == 0)
480 return 0;
481
482 buffered = pDramInfo->buffered;
483 bursts &= pDramInfo->bursts; /* union of all bursts */
484 if (pDramInfo->Trp > Trp) /* worst case (longest) Trp */
485 Trp = pDramInfo->Trp;
486
487 if (pDramInfo->Trcd > Trcd) /* worst case (longest) Trcd */
488 Trcd = pDramInfo->Trcd;
489
490 prefresh = pIdx;
491 /* worst case (shortest) Refresh period */
492 if (refresh > prefresh[pDramInfo->refresh & 7])
493 refresh = prefresh[pDramInfo->refresh & 7];
494
495 } /* for loop */
496
497
498 /* We only allow a burst length of 8! */
499 if (!(bursts & 8))
500 bursts = 8;
501
502 /* Sort the devices. In order to get each chip select region
503 * aligned properly, put the biggest device at the lowest address.
504 * A simple bubble sort will do the trick.
505 */
506 for (banknum = 0, pDramInfo = &DramInfo[0];
507 banknum < TOTAL_BANK; banknum++, pDramInfo++) {
508 int i;
509
510 for (i = 0; i < TOTAL_BANK; i++) {
511 if (pDramInfo->size < DramInfo[i].size &&
512 pDramInfo->ordinal < DramInfo[i].ordinal) {
513 /* If the current bank is smaller, but if the ordinal is also
514 * smaller, swap the ordinals
515 */
516 u8 temp8;
517
518 temp8 = DramInfo[i].ordinal;
519 DramInfo[i].ordinal = pDramInfo->ordinal;
520 pDramInfo->ordinal = temp8;
521 }
522 }
523 }
524
525
526 /* Now figure out the base address for each bank. While
527 * we're at it, figure out how much memory there is.
528 *
529 */
530 size = 0;
531 for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
532 int i;
533
534 for (i = 0; i < TOTAL_BANK; i++) {
535 if (DramInfo[i].ordinal == banknum
536 && DramInfo[i].size != 0) {
537 DramInfo[i].base = size;
538 size += DramInfo[i].size;
539 }
540 }
541 }
542
543 /* Set up the Drive Strength register */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200544 sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
wdenk983fda82004-10-28 00:09:35 +0000545
546 /* ********************** Cfg 1 ************************* */
547
548 /* Set the single read to read/write/precharge delay */
549 cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb);
550
551 /* Set the single write to read/write/precharge delay.
552 * This may or may not be correct. The controller spec
553 * says "tWR", but "tWR" does not appear in the SPD. It
554 * always seems to be 15nsec for the class of device we're
555 * using, which turns out to be 2 clock cycles at 133MHz,
556 * so that's what we're going to use.
557 *
558 * HOWEVER, because of a bug in the controller, for DDR
559 * we need to set this to be the same as the value
560 * calculated for bwt2rwp.
561 */
562 cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2);
563
564 /* Set the Read CAS latency. We're going to use a CL of
wdenk12b43d52005-04-05 21:57:18 +0000565 * 2.5 for DDR and 2 SDR.
wdenk983fda82004-10-28 00:09:35 +0000566 */
567 cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2);
568
569
570 /* Set the Active to Read/Write delay. This depends
571 * on Trcd which is reported as nanoseconds times 4.
572 * We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz)
573 * which gives us a dimensionless quantity. Play games with
574 * the divisions so we don't run out of dynamic ranges.
575 */
576 /* account for megaherz and the times 4 */
577 temp = (Trcd * (gd->bus_clk / 1000000)) / 4;
578
579 /* account for nanoseconds and round up, with a minimum value of 2 */
580 temp = ((temp + 999) / 1000) - 1;
581 if (temp < 2)
582 temp = 2;
583
584 cfg_value |= CFG1_ACT2WR (temp);
585
586 /* Set the precharge to active delay. This depends
587 * on Trp which is reported as nanoseconds times 4.
588 * We want to calculate Trp (in nanoseconds) times XLB clock (in Hz)
589 * which gives us a dimensionless quantity. Play games with
590 * the divisions so we don't run out of dynamic ranges.
591 */
592 /* account for megaherz and the times 4 */
593 temp = (Trp * (gd->bus_clk / 1000000)) / 4;
594
595 /* account for nanoseconds and round up, then subtract 1, with a
596 * minumum value of 1 and a maximum value of 7.
597 */
598 temp = (((temp + 999) / 1000) - 1) & 7;
599 if (temp < 1)
600 temp = 1;
601
602 cfg_value |= CFG1_PRE2ACT (temp);
603
604 /* Set refresh to active delay. This depends
605 * on Trfc which is not reported in the SPD.
606 * We'll use a nominal value of 75nsec which is
607 * what the controller spec uses.
608 */
609 temp = (75 * (gd->bus_clk / 1000000));
610 /* account for nanoseconds and round up, then subtract 1 */
611 cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1);
612
613 /* Set the write latency, using the values given in the controller spec */
614 cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0);
615 memctl->cfg1 = cfg_value; /* cfg 1 */
616 asm volatile ("sync");
617
618
619 /* ********************** Cfg 2 ************************* */
620
621 /* Set the burst read to read/precharge delay */
622 cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8);
623
624 /* Set the burst write to read/precharge delay. Semi-magic numbers
625 * based on the controller spec recommendations, assuming tWR is
626 * two clock cycles.
627 */
628 cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10);
629
630 /* Set the Burst read to write delay. Semi-magic numbers
631 * based on the DRAM controller documentation.
632 */
633 cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb);
634
635 /* Set the burst length -- must be 8!! Well, 7, actually, becuase
636 * it's burst lenght minus 1.
637 */
638 cfg_value |= CFG2_BURSTLEN (7);
639 memctl->cfg2 = cfg_value; /* cfg 2 */
640 asm volatile ("sync");
641
642
643 /* ********************** mode ************************* */
644
645 /* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit,
646 * disable automatic refresh.
647 */
648 cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH |
649 ((type == TYPE_DDR) ? CTL_DDR_MODE : 0);
650
651 /* Set the address mux based on whichever setting(s) is/are common
652 * to all the devices we have. If there is more than one, choose
653 * one arbitrarily.
654 */
655 if (muxmask & 0x4)
656 cfg_value |= CTL_ADDRMUX (2);
657 else if (muxmask & 0x2)
658 cfg_value |= CTL_ADDRMUX (1);
659 else
660 cfg_value |= CTL_ADDRMUX (0);
661
662 /* Set the refresh interval. */
663 temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1;
664 cfg_value |= CTL_REFRESH_INTERVAL (temp);
665
666 /* Set buffered/non-buffered memory */
667 if (buffered)
668 cfg_value |= CTL_BUFFERED;
669
670 memctl->ctrl = cfg_value; /* ctrl */
671 asm volatile ("sync");
672
673 if (type == TYPE_DDR) {
674 /* issue precharge all */
675 temp = cfg_value | CTL_PRECHARGE_CMD;
676 memctl->ctrl = temp; /* ctrl */
677 asm volatile ("sync");
678 }
679
680
wdenk12b43d52005-04-05 21:57:18 +0000681 /* Set up mode value for CAS latency */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200682#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
wdenk12b43d52005-04-05 21:57:18 +0000683 mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
684 MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
685#else
wdenk983fda82004-10-28 00:09:35 +0000686 mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
687 MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD);
wdenk12b43d52005-04-05 21:57:18 +0000688#endif
wdenk983fda82004-10-28 00:09:35 +0000689 asm volatile ("sync");
690
691 /* Write Extended Mode - enable DLL */
692 if (type == TYPE_DDR) {
693 temp = MODE_EXTENDED | MODE_X_DLL_ENABLE |
694 MODE_X_DS_NORMAL | MODE_CMD;
695 memctl->mode = (temp >> 16); /* mode */
696 asm volatile ("sync");
697
wdenk12b43d52005-04-05 21:57:18 +0000698 /* Write Mode - reset DLL, set CAS latency */
wdenk983fda82004-10-28 00:09:35 +0000699 temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL);
700 memctl->mode = (temp >> 16); /* mode */
701 asm volatile ("sync");
702 }
703
704 /* Program the chip selects. */
705 for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
706 if (DramInfo[banknum].size != 0) {
707 u32 mask;
708 int i;
709
710 for (i = 0, mask = 1; i < 32; mask <<= 1, i++) {
711 if (DramInfo[banknum].size & mask)
712 break;
713 }
714 temp = (DramInfo[banknum].base & 0xfff00000) | (i -
715 1);
716
717 sysconf->cscfg[banknum] = temp;
718 asm volatile ("sync");
719 }
720 }
721
722 /* Wait for DLL lock */
723 udelay (200);
724
725 temp = cfg_value | CTL_PRECHARGE_CMD; /* issue precharge all */
726 memctl->ctrl = temp; /* ctrl */
727 asm volatile ("sync");
728
729 temp = cfg_value | CTL_REFRESH_CMD; /* issue precharge all */
730 memctl->ctrl = temp; /* ctrl */
731 asm volatile ("sync");
732
733 memctl->ctrl = temp; /* ctrl */
734 asm volatile ("sync");
735
736 /* Write Mode - DLL normal */
737 temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL);
738 memctl->mode = (temp >> 16); /* mode */
739 asm volatile ("sync");
740
741 /* Enable refresh, enable DQS's (if DDR), and lock the control register */
742 cfg_value &= ~CTL_MODE_ENABLE; /* lock register */
743 cfg_value |= CTL_REFRESH_ENABLE; /* enable refresh */
744
745 if (type == TYPE_DDR)
746 cfg_value |= CTL_DQSOEN (0xf); /* enable DQS's for DDR */
747
748 memctl->ctrl = cfg_value; /* ctrl */
749 asm volatile ("sync");
750
751 return size;
752}