CHANGELOG

commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 18 17:20:58 2007 +0200

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 18 17:07:26 2007 +0200

    Cleanup, update CHANGELOG

    Sigend-off-by: Wolfgang Denk <wd@denx.de>

commit 5f6c732affea9647762d27a4617a2ae64c52dceb
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 18 16:17:46 2007 +0200

    Update CHANGELOG

commit ad4eb555671d97f96dc56eab55103b1f86874b01
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 18 14:30:39 2007 +0200

    MCC200 board: remove warning which is obsolete after PSoC firmware changes

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 3747a3f010b2b1442dec3e871c69788b6017aaae
Author: Domen Puncer <domen.puncer@telargo.com>
Date:	Wed Apr 18 12:11:05 2007 +0200

    [PATCH] icecube/lite5200b: document wakeup from low-power support

    Signed-off-by: Domen Puncer <domen.puncer@telargo.com>

commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 18 12:07:47 2007 +0200

    ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
Author: Stefan Roese <sr@denx.de>
Date:	Wed Apr 18 12:05:59 2007 +0200

    ppc4xx: Add output for bootrom location to 405EZ ports

    Now 405EZ ports also show upon bootup from which boot device
    they are configured to boot:

    U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)

    CPU:   AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
	   Bootstrap Option E - Boot ROM Location EBC (32 bits)
	   16 kB I-Cache 16 kB D-Cache
    Board: Acadia - AMCC PPC405EZ Evaluation Board

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
Author: Domen Puncer <domen.puncer@telargo.com>
Date:	Mon Apr 16 14:00:13 2007 +0200

    [PATCH] icecube/lite5200b: wakeup from low-power support

    U-Boot part of Lite5200b low power mode support.
    Puts SDRAM out of self-refresh and transfers control to
    address saved at physical 0x0.

    Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>

commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sun Apr 15 13:54:26 2007 -0400

    Fix the ft_cpu_setup() property settings.

    Use "setter" functions instead of flags, cleaner and more flexible.
    It also fixes the problem noted by Timur Tabi that the ethernet MAC
    addresses were all being set incorrectly to the same MAC address.

commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Apr 14 22:51:24 2007 -0400

    Improve the bootm command for CONFIG_OF_LIBFDT

    In bootm, create the "/chosen" node only if it doesn't already exist
      (better matches the previous behavior).
    Update for proper reserved memory map handling for initrd.

commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Apr 14 22:46:41 2007 -0400

    Add some utilities to manipulate the reserved memory map.

commit 8048cdd56f04a756eeea4951f402bf5cc33785db
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Apr 14 21:16:54 2007 +0200

    Update CHANGELOG

commit 8e6875183cdca91c134408d119d4abcd48ef6856
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 18:56:46 2006 +0100

    AVR32: Enable MMC support

    Set up the portmux for the MMC interface and enable the MMC driver
    along with support for DOS partitions, ext2 and FAT filesystems.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit fc26c97bb6df41b4a95662c34054fe912387bf38
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Fri Jan 20 10:03:53 2006 +0100

    Atmel MCI driver

    Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.

    The AT91 ARM-based CPUs use basically the same hardware, so it should
    be possible to share this driver, but no effort has been made so far.

    Hardware documentation can be found in the AT32AP7000 data sheet,
    which can be downloaded from

    http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 18:55:37 2006 +0100

    AVR32: Add clk and gpio infrastructure for mmci

    Implement functions for configuring the mmci pins, as well as
    functions for getting the clock rate of the mmci controller.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 7fac3f69e9f05c5e5326681976c35d129324c4de
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 18:53:56 2006 +0100

    Enable partition support with MMC

    Include implementations of init_part() and get_partition_info() when
    CONFIG_MMC is set.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 17:14:30 2006 +0100

    AVR32: Enable networking

    Implement MACB initialization for AVR32 and ATSTK1000, and turn
    everything on, including the MACB driver.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Fri Jan 20 10:03:34 2006 +0100

    Atmel MACB ethernet driver

    Driver for the Atmel MACB on-chip ethernet controller.

    This driver has been tested on the ATSTK1000 board with a AT32AP7000
    CPU. It should probably work on AT91SAM926x as well with some minor
    modifications.

    Hardware documentation can be found in the AT32AP7000 data sheet,
    which can be downloaded from

    http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 16:56:14 2006 +0100

    AVR32: Add clk and gpio infrastructure for macb0 and macb1

    Implement functions for configuring the macb0 and macb1 pins, as
    well as functions for getting the clock rate of the various
    busses the macb ethernet controllers are connected to.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit d5acb95b16a0a74c643524342c3437e765426d05
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 15:39:15 2006 +0100

    AVR32: Implement simple DMA memory allocator

    Implement dma_alloc_coherent() which returns cache-aligned
    uncacheable memory.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 91975b0fea773c9e681fea8cf3349669f27685ee
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 15:46:02 2006 +0100

    Import <linux/mii.h> from the Linux kernel

    Instead of creating yet another set of MII register definitions
    in the macb driver, here's a complete set of definitions for everyone
    to use.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 1b804b229556a4d862da93c0ec94e79419364b2c
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Wed Mar 21 19:47:36 2007 +0100

    AVR32: Include more commands for ATSTK1000

    Include the imi, imls and jffs commands sets by default on ATSTK1000.
    Also define CONFIG_BOOTARGS to something more useful, define
    CONFIG_BOOTCOMMAND and enable autoboot by default.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Wed Mar 21 19:44:48 2007 +0100

    AVR32: Provide a definition of struct stat

    Copy the definition of struct stat from the Linux kernel.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 12f099c08167a7a51aeee623bc16dafd0841271c
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Dec 17 14:46:06 2006 +0100

    AVR32: Use initdram() instead of board_init_memories()

    Conform to the "standard" interface and use initdram() instead of
    board_init_memories() on AVR32. This enables us to get rid of the
    sdram_size member of the global_data struct as well.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Mon Nov 20 15:53:10 2006 +0100

    AVR32: Relocate u-boot to SDRAM

    Relocate the u-boot image into SDRAM like everyone else does. This
    means that we can handle much larger .data and .bss than we used to.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit df548d3c3e2bbc40258713167859ffc2ce99a900
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sun Nov 19 18:06:53 2006 +0100

    AVR32: Resource management rewrite

    Rewrite the resource management code (i.e. I/O memory, clock gating,
    gpio) so it doesn't depend on any global state. This is necessary
    because this code is heavily used before relocation to RAM, so we
    can't write to any global variables.

    As an added bonus, this makes u-boot's memory footprint a bit smaller,
    although some functionality has been left out; all clocks are enabled
    all the time, and there's no checking for gpio line conflicts.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sat Nov 18 18:01:13 2006 +0100

    AVR32: Clean up memory-map.h for at32ap7000

    Convert spaces to tabs (must have missed this one last time around),
    sort the entries by address and group them together by bus
    connectivity.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 28c699ef69f4b6cdf252e4747b7b590028a88981
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sat Nov 18 17:32:31 2006 +0100

    AVR32: Build position-independent u-boot

    Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
    position independent. This will make relocation a lot easier.

    -mno-init-got means that gcc shouldn't emit code to load the GOT
    address into r6 in every function prologue. We do it once and for
    all in the early startup assembly code, so enabling this option
    makes u-boot a bit faster and smaller.

    The assembly parts have always been position-independent, so no code
    changes should be necessary.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sat Nov 18 17:24:31 2006 +0100

    AVR32: Use avr32-linux- cross-compilation prefix by default

    It doesn't really matter which toolchain you use to compile u-boot,
    but the avr32-linux one is probably what most people have installed.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Sat Nov 18 17:15:30 2006 +0100

    AVR32: Split start_u_boot into board_init_f and board_init_r

    Split the avr32 initialization code into a function to run before
    relocation, board_init_f and a function to run after relocation,
    board_init_r. For now, board_init_f simply calls board_init_r
    at the end.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Sat Apr 14 05:26:48 2007 +0200

    [Fix]	Set the LED status register on the UC101 for the LXT971 PHY.
	    clear the Display after reset.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
Author: Denis Peter <d.peter@mpl.ch>
Date:	Fri Apr 13 09:13:33 2007 +0200

    [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c

    Fix bug introduced by "Fix get_partition_info() parameter error in all
    other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
    to use diskboot or scsiboot form another device than 0.

    Signed-off-by: Denis Peter <d.peter@mpl.ch>

commit 0b94504d22e70f537c17a0d38c87edb6e370977d
Author: Greg Lopp <lopp@pobox.com>
Date:	Fri Apr 13 08:02:24 2007 +0200

    [PATCH] Fix use of "void *" for block dev read/write buffer pointers

    Signed-of-by: Greg Lopp <lopp@pobox.com>
    Acked-by: Grant Likely <grant.likely@secretlab.ca>

commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
Author: Jeffrey Mann <mannj@embeddedplanet.com>
Date:	Thu Apr 12 14:15:59 2007 +0200

    ppc4xx: Fix i2c divisor calcularion for PPC4xx

    This patch fixes changes the i2c_init(...) function to use the function
    get_OPB_freq() rather than calculating the OPB speed by
    sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
    specific per processor. The prior method was not and so was calculating
    the wrong speed for some PPC4xx processors.

    Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 11 17:25:01 2007 +0200

    Update CHANGELOG

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 51056dd9863e6a1bc363afbbe1775c58cd967418
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 11 17:22:55 2007 +0200

    Update for SC3 board

    * Make IDE timeout configurable through ide_reset_timeout variable.
    * Use Newline as "password" string
    * Use just a single partition in NAND flash

commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Mon Jan 22 12:37:30 2007 -0600

    Add PIXIS FPGA support for MPC8641HPCN board.

    Move the 8641HPCN's PIXIS code to the new directory
    board/freescale/common/ as it will be shared by
    future boards not in the same processor family.

    Write a "pixis_reset" command that utilizes the FPGA
    reset sequencer to support alternate soft-reset options
    such as using the "alternate" flash bank, enabling
    the watch dog, or choosing different CPU frequencies.

    Add documentation for the pixis_reset to README.mpc8641hpcn.

    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Fri Apr 6 14:19:43 2007 -0400

    Moved fdt command support code to fdt_support.c

    ...in preparation for improving the bootm command's handling of fdt blobs.
    Also cleaned up some coding sloppiness.

commit 6679f9299534e488a171a9bb8f9bb891de247aab
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Fri Apr 6 14:17:14 2007 -0400

    libfdt: Make fdt_check_header() public

    Changed _fdt_check_header() to fdt_check_header() and made it part of
    the interface - it is a useful routine.

    Also did some asthetics cleanup to the include files (headers).

commit c0707ce65677650b5ceab0500ee50ae5168afef2
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:34:06 2007 +0800

    [Blackfin][PATCH] Kill off a bunch of common local prototypes

commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:33:04 2007 +0800

    [Blackfin][PATCH] Fix dynamic CPLB generation issue

commit 0445e3a264251d75b1be45ef713c70726a2952f0
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:31:47 2007 +0800

    [Blackfin][PATCH] minior cleanup

commit 155fd766573981090e638b493d5857562151862e
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:31:18 2007 +0800

    [Blackfin][PATCH] Fix copyright and update license

commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:30:25 2007 +0800

    [Blackfin][PATCH] Add BF537 EMAC driver initialization

commit 889256e8604e0c68db1d866d720894dffede9df6
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:29:55 2007 +0800

    [Blackfin][PATCH] call real the system synchronize instruction

commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:29:17 2007 +0800

    [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it

commit dfeeab2cd680df047e68e723b246adf6f33bb556
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Thu Apr 5 18:28:34 2007 +0800

    [Blackfin][PATCH]: fix flash unaligned copy issue

commit 443feb740584e406efa203af909fe2926608e8d5
Author: Igor Marnat <marny@rambler.ru>
Date:	Wed Mar 21 09:55:01 2007 +0300

    Update usage of 'nc' in README.NetConsole

    Added information about usage of NetConsole on systems where the -l and -p
    switches are mutually exclusive.

    Signed-off-by: Igor Marnat <marny@rambler.ru>
    Signed-off-by: Ben Warren <bwarren@qstreams.com>

commit 31c98a88228021b314c89ebb8104fb6473da4471
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 4 02:09:30 2007 +0200

    Minor coding style cleanup.

commit 94abd7c0583ebe01e799b25f451201deeaab550d
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Apr 4 01:49:15 2007 +0200

    Minor cleanup.

commit a65c5768e5537530bd1780af3d3fddc3113a163c
Author: Stefan Roese <sr@denx.de>
Date:	Mon Apr 2 10:09:30 2007 +0200

    ppc4xx: Change SysACE address on Katmai

    With this new base address of the Xilinx SystemACE controller
    the Linux driver will be easier to adapt, since it can now be
    mapped via the "normal" ioremap() call.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Mar 31 14:30:53 2007 -0400

    Fix some minor whitespace violations.

commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Mar 31 12:23:51 2007 -0400

    Add a flattened device tree (fdt) command (2 of 2)

    Modifications to the existing code to support the new fdt command.

commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Mar 31 12:22:10 2007 -0400

    Add a flattened device tree (fdt) command (1 of 2)

    The fdt command uses David Gibson's libfdt library to manipulate as well
    as print the flattened device tree.  This patch is the new command,
    the second part is the modifications to the existing code.

commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Mar 31 12:13:43 2007 -0400

    libfdt: Enhanced and published fdt_next_tag()

    Enhanced the formerly private function _fdt_next_tag() to allow stepping
      through the tree, used to produce a human-readable dump, and made
      it part of the published interface.
    Also added some comments.

commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Mar 31 12:05:39 2007 -0400

    libfdt: Customizations for use by u-boot.

    Changes to David Gibson's original source to fit into u-boot's
    environment.  No functionality changes.

commit 35748177c64a4a83a00057e93bb33e40278a2a96
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Mar 31 12:00:56 2007 -0400

    libfdt: Import libfdt source (2 of 2)

    This adds the applicable libfdt source files (unmodified) and a README
    to explain where the source came from.

commit 7cd5da0fe877e7171a4cdd44880bce783132871a
Author: Gerald Van Baren <vanbaren@cideas.com>
Date:	Sat Mar 31 11:59:59 2007 -0400

    libfdt: Import libfdt source (1 of 2)

    This adds the applicable libfdt source files (unmodified) and a README
    to explain where the source came from.

commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 31 13:16:23 2007 +0200

    ppc4xx: Update Katmai bootstrap command

    Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
    is selected.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit cabee756a6532986729477c3cc1ea16ef8517ad2
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 31 13:15:06 2007 +0200

    ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)

    Additional RAM information is now printed upon powerup, like
    DDR2 frequency and CAS latency.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 60723803431ac75cad085690789e433d5ab9174e
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 31 08:48:36 2007 +0200

    ppc4xx: Change Yucca config file to support ECC

    With the updated 44x DDR2 driver the Yucca board now supports
    ECC generation and checking.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 490e5730c674b20d708b783a2c5ffd7208f83873
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 31 08:47:34 2007 +0200

    ppc4xx: Fix "bootstrap" command for Katmai board

    The board specific "bootstrap" command is now fixed and can
    be used for the AMCC Katmai board to configure different
    CPU/PLB/OPB frequencies.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 31 08:46:08 2007 +0200

    ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)

    Fix a bug in the auto calibration routine. This driver now runs
    more reliable with the tested modules. It's also tested with
    167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 342cd097be1e7affe82f42ab3da220959a699e64
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 30 22:52:09 2007 +0200

    [PATCH] Clean include dependence

commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
Author: Michal Simek <monstr@monstr.eu>
Date:	Fri Mar 30 22:42:45 2007 +0200

    [CLEAN] Remove inefficient Suzaku code

commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 28 15:03:16 2007 +0200

    Merge some AMCC make targets to keep the top-level Makefile smaller

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 28 14:52:12 2007 +0200

    i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined

    The "old" i2c commands (iprobe, imd...) are now compiled in again,
    even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
    config option.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
Author: Michal Simek <monstr@monstr.eu>
Date:	Tue Mar 27 00:32:16 2007 +0200

    PATCH: Resolve GPL license problem

commit 1798049522f594013aea29457d46794298c6ae15
Author: Michal Simek <root@monstr.eu>
Date:	Mon Mar 26 01:39:07 2007 +0200

    Support for XUPV2P board
    Reset support
    BSP autoconfig support

commit 0d974d5297349504a2ddfa09314be573b5df320a
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 24 15:57:09 2007 +0100

    [PATCH] Add 4xx GPIO functions

    This patch adds some 4xx GPIO functions. It also moves some of the
    common code and defines into a common 4xx GPIO header file.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 24 15:55:58 2007 +0100

    [PATCH] Small Sequoia cleanup

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
Author: Stefan Roese <sr@denx.de>
Date:	Sat Mar 24 15:45:34 2007 +0100

    [PATCH] Clean up 40EZ/Acadia support

    This patch cleans up all the open issue of the preliminary
    Acadia support.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Dec 12 11:02:20 2006 -0600

    Fix 8641HPCN problem with ld version 2.16

    (Dot outside sections problem).

    This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Thu Dec 7 10:35:55 2006 -0600

    Set Rev 2.x 86xx PIC in mixed mode.

    Prevent false interrupt from hanging Linux as MSR[EE] is set
    to enable interrupts by changing the PIC out of the default
    pass through mode into mixed mode.

    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
Author: Jason Jin <jason.jin@freescale.com>
Date:	Thu Dec 7 10:32:35 2006 -0600

    Add flash cmd function to 8641HPCN ramboot

    Also fixes some commmand for 8641 HPCN ramboot case.

    Signed-off-by: Jason Jin <jason.jin@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
Author: Ed Swarthout <ed.swarthout@freescale.com>
Date:	Thu Dec 7 10:34:14 2006 -0600

    Add support for 8641 Rev 2 silicon.

    Without this patch, I am unable to get to the prompt on rev 2 silicon.
    Only set ddrioovcr for rev1.

    Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 44ba464b99001f8bd1c456a1e9d59726252f707a
Author: Wolfgang Denk <wd@denx.de>
Date:	Thu Mar 22 00:13:12 2007 +0100

    Code cleanup / re-insert previous Copyright entries.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Mar 21 23:26:15 2007 +0100

    Code cleanup. Update CHANGELOG

commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 21 14:54:29 2007 +0100

    ppc4xx: Fix file mode of include/configs/acadia.h

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d5f4614c9350d9333e575100fb250aab774d0258
Author: Markus Klotzbuecher <mk@denx.de>
Date:	Wed Mar 21 14:41:46 2007 +0100

    SPC1920: fix small clock routing bug

    Signed-off-by: Markus Klotzbuecher <mk@denx.de>

commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 21 13:39:57 2007 +0100

    [PATCH] Add AMCC Acadia (405EZ) eval board support

    This patch adds support for the new AMCC Acadia eval board.

    Please note that this Acadia/405EZ support is still in a beta stage.
    Still lot's of cleanup needed but we need a preliminary release now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e01bd218b00af73499331a1a701625a852cd286f
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 21 13:38:59 2007 +0100

    [PATCH] Add AMCC PPC405EZ support

    This patch adds support for the new AMCC 405EZ PPC. It is in
    preparation for the AMCC Acadia board support.

    Please note that this Acadia/405EZ support is still in a beta stage.
    Still lot's of cleanup needed but we need a preliminary release now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Wed Mar 21 08:45:17 2007 +0100

    [PATCH] TQM8272: dont change the bits given from the HRCW
		     for the SIUMCR and BCR Register.
		     Fix the calculation for the EEprom Size

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 654589873dbafcf104dff133ce0d03a4506e9cc3
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Tue Mar 20 18:16:24 2007 +0800

    [Blackfin][PATCH] Add BF561 EZKIT board support

commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Mon Mar 19 22:55:58 2007 +0800

    [Blackfin][PATCH] minor cleanup

commit 389b6bb50f745bf5038ce030300d8a8512e96f79
Author: Wolfgang Denk <wd@denx.de>
Date:	Mon Mar 19 13:10:08 2007 +0100

    Remove obsoleted POST files.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Mon Mar 19 01:26:11 2007 +0800

    [PATCH] Add flash chip M29W320ET/B support

commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Mon Mar 19 01:24:52 2007 +0800

    [Blackfin][PATCH] Add BF537 stamp board support

commit 8423e5e31a7235d05a482627315fb11d49c17bd7
Author: Stefan Roese <sr@denx.de>
Date:	Fri Mar 16 21:11:42 2007 +0100

    [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board

    Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
    DDR memory are dynamically programmed matching the total size
    of the equipped memory (DIMM modules).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 76d1466f918b881cda2d259254761e73885093c2
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Tue Mar 13 13:38:05 2007 +0100

    [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
	    boards in terms of unification.

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Mar 13 16:05:55 2007 +0100

    Make SC3 board build with 'make O='; use 'addcons' consistently
    (SC3 and Jupiter used to use 'addcon' instead).

    Signed-off-by: Wolfgang Denk wd@denx.de

commit 8502e30a28e492c756ea2d7df0ace026388fce4b
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Tue Mar 13 09:40:59 2007 +0100

    [PATCH] update board config for jupiter Board:
	    added Hush Shell,
		  CONFIG_CMDLINE_EDITING,
		  CFG_ENV_ADDR_REDUND activated

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Mon Mar 12 12:11:55 2007 +0800

    [Blackfin][PATCH] minor cleanup

commit bfa5754a58477ac917d21527cd0f079d87cf188e
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Mon Mar 12 01:42:06 2007 +0800

    [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue

commit 8440bb14581a294375c34b91b42512f9753d1130
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Mon Mar 12 00:25:14 2007 +0800

    [Blackfin][PATCH] code cleanup

commit cfc67116a706fd18b8f6a9c11a16753c5626d689
Author: Michal Simek <monstr@monstr.eu>
Date:	Sun Mar 11 13:48:24 2007 +0100

    [Microblaze][PATCH] part 2
    timer support
    interrupt controller support
    flash support
    ethernet support
    cache support
    board information support
    env support
    booting image support

    adding support for Xilinx ML401

commit 76316a318de91f6184e7c22a10e02d275ade2441
Author: Michal Simek <monstr@monstr.eu>
Date:	Sun Mar 11 13:42:58 2007 +0100

    [Microblaze][PATCH]
    timer support
    interrupt controller support
    flash support
    ethernet support
    cache support
    board information support
    env support
    booting image support

    adding support for Xilinx ML401

commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
Author: Aubrey Li <aubrey.adi@gmail.com>
Date:	Sat Mar 10 23:49:29 2007 +0800

    [Blackfin][PATCH] code cleanup

commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
Author: Aubrey.Li <aubrey.adi@gmail.com>
Date:	Fri Mar 9 13:40:56 2007 +0800

    [Blackfin][PATCH-2/2] Common files changed to support bf533 platform

commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
Author: Aubrey.Li <aubrey.adi@gmail.com>
Date:	Fri Mar 9 13:38:44 2007 +0800

    [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support

commit 992423ab43c2bcf6b704853bd00af77450915e20
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 8 23:00:08 2007 +0100

    ppc4xx: Fix file mode of sequoia.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit eb92f613556800f7483666db09d9a237ad911d4a
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Thu Mar 8 22:52:51 2007 +0100

    Minor cleanup.

commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
Author: John Otken john@softadvances.com <john@softadvances.com>
Date:	Thu Mar 8 09:39:48 2007 -0600

    ppc4xx: Clear Sequoia/Rainier security engine reset bits

    Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>

commit 650a330dd2539130c8c324791e2f9f75aed79d4e
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Thu Mar 8 16:26:52 2007 +0100

    [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit d9fc703246840c4b268debf48c334ba55c597dc0
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Thu Mar 8 16:25:47 2007 +0100

    [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit ced5b9029043397348cdc88e0cfcd6b1f629250b
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Thu Mar 8 16:23:11 2007 +0100

    [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Thu Mar 8 16:20:32 2007 +0100

    [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit f9fc6a5852a6335840882fa2111925010eea1abe
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date:	Wed Mar 7 15:32:01 2007 +0100

    fixed ethernet phy configuration for plu405 board

    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

commit 769104c9356594deb2092e204a39c05b33202d6c
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Thu Mar 8 21:49:27 2007 +0100

    Minor cleanup

commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 8 10:13:16 2007 +0100

    [PATCH] Update AMCC Luan 440SP eval board support

    The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
    inititializition. This includes DDR auto calibration and support
    for different DIMM modules, instead of the fixed setup used in
    the earlier version.

    This patch also enables the cache in FLASH for the startup
    phase of U-Boot (while running from FLASH). After relocating to
    SDRAM the cache is disabled again. This will speed up the boot
    process, especially the SDRAM setup, since there are some loops
    for memory testing (auto calibration).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2f5df47351910a2936c7741cf111855829200943
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 8 10:10:18 2007 +0100

    [PATCH] Update AMCC Yucca 440SPe eval board support

    The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
    inititializition. This includes DDR auto calibration and support
    for different DIMM modules, instead of the fixed setup used in
    the earlier version.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2721a68a9ea91f1e494649ce68b2577261f578e2
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 8 10:07:18 2007 +0100

    ppc4xx: Small AMCC Katmai 440SPe update

    Signed-off-by: Stefan Roese <sr@denx.de>

commit df294497479b1dca6dd86318b2a912f72fede0df
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 8 10:06:09 2007 +0100

    ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 83853178bd36bca6f0f8f1331476620c84a587fc
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date:	Wed Mar 7 12:14:50 2007 -0600

    net - Support ping reply when processing net-loop

    Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.

    This permits the ping command to test the phy interface when the phy
    is put in loopback mode (typically by setting register 0 bit 14).

    It also allows the port to respond to an external ping when u-boot is
    processing some other net command (such as tftp).  This is useful when
    tftp appears to hang.

    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
    Signed-off-by: Ben Warren <bwarren@qstreams.com>

commit fa1aef15bcd47736687be1af544506e90fba545d
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 7 16:43:00 2007 +0100

    [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board

    Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
    DDR memory are dynamically programmed matching the total size
    of the equipped memory (DIMM modules).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e2ebe696818939e2b974628be9c921ea3fe9de13
Author: Stefan Roese <sr@denx.de>
Date:	Wed Mar 7 16:39:36 2007 +0100

    [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's

    This patch fixes a problem that occurs when 2 DIMM's are
    used. This problem was first spotted and fixed by Gerald Jackson
    <gerald.jackson@reaonixsecurity.com> but this patch fixes the
    problem in a little more clever way.

    This patch also adds the nice functionality to dynamically
    create the TLB entries for the SDRAM (tlb.c). So we should
    never run into such problems with wrong (too short) TLB
    initialization again on these platforms.

    As this feature is new to the "old" 44x SPD DDR driver, it
    has to be enabled via the CONFIG_PROG_SDRAM_TLB define.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 39218433983417b9df087976a79e3f80dd5e83d6
Author: Wolfgang Denk <wd@denx.de>
Date:	Wed Mar 7 16:33:44 2007 +0100

    UC101: fix compiler warnings

commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Wed Mar 7 16:19:46 2007 +0100

    HMI1001: fix build error, cleanup compiler warnings.

commit ad5bb451ade552c44bef9119d907929ebc2c126f
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Mar 6 18:08:43 2007 +0100

    Restructure POST directory to support of other CPUs, boards, etc.

commit a5284efd125967675b2e9c6ef7b95832268ad360
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Mar 6 18:01:47 2007 +0100

    Fix HOSTARCH handling.
    Patch by Mike Frysinger, Mar 05 2007

commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
Author: Stefan Roese <sr@denx.de>
Date:	Tue Mar 6 07:47:04 2007 +0100

    [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup

    As provided by the AMCC applications team, this patch optimizes the
    DDR2 setup for 166MHz bus speed. The values provided are also save
    to use on a "normal" 133MHz PLB bus system. Only the refresh counter
    setup has to be adjusted as done in this patch.

    For this the NAND booting version had to include the "speed.c" file
    from the cpu/ppc4xx directory. With this addition the NAND SPL image
    will just fit into the 4kbytes of program space. gcc version 4.x as
    provided with ELDK 4.x is needed to generate this optimized code.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sun Mar 4 01:36:05 2007 +0100

    Some code cleanup.

commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Feb 28 00:02:04 2007 -0600

    mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings

    (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)

commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Feb 27 23:51:42 2007 -0600

    mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode

    The config value for:
    * CFG_ACR_PIPE_DEP
    * CFG_ACR_RPTCNT
    * CFG_SPCR_TSEC1EP
    * CFG_SPCR_TSEC2EP
    * CFG_SCCR_TSEC1CM
    * CFG_SCCR_TSEC2CM

    Were not being used when setting the appropriate register

    Added:
    * CFG_SCCR_USBMPHCM
    * CFG_SCCR_USBDRCM
    * CFG_SCCR_PCICM
    * CFG_SCCR_ENCCM

    To allow full config of the SCCR.

    Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
    that were just bogus.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit d51b3cf371cd441030460ef19d36b2924c361b1a
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Thu Feb 22 20:06:57 2007 -0600

    mpc83xx: update [local-]mac-address properties on UEC based devices

    8360 and 832x weren't updating their [local-]mac-address
    properties. This patch fixes that.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

commit 61f4f912acbe60776c5e00df1ec94094ce672957
Author: Timur Tabi <timur@freescale.com>
Date:	Tue Feb 13 10:41:42 2007 -0600

    mpc83xx: write MAC address to mac-address and local-mac-address

    Some device trees have a mac-address property, some have local-mac-address,
    and some have both.  To support all of these device trees, this patch
    updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
    This function already updates local-mac-address.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 22d71a71f57fd5d38b27ac3848e50d790360a598
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Feb 27 18:41:08 2007 -0600

    mpc83xx: add command line editing by default

commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Feb 14 19:50:53 2007 -0600

    mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers

    Disable G1TXCLK, G2TXCLK h/w buffers. This patch
    fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.

    Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.

    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
    Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>

commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
Author: Xie Xiaobo <r63061@freescale.com>
Date:	Wed Feb 14 18:27:17 2007 +0800

    mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx

    The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
    it pass DDR/DDR2 compliance tests.

    Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>

commit b110f40bd180c6b560276589beedf753e97c46ce
Author: Xie Xiaobo <r63061@freescale.com>
Date:	Wed Feb 14 18:27:06 2007 +0800

    mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS

    MPC8360E rev2.0 have new spridr,and PVR value,
    The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.

    Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>

commit 8d172c0f0d85998a256a95b7459a5403a30380ed
Author: Xie Xiaobo <r63061@freescale.com>
Date:	Wed Feb 14 18:26:44 2007 +0800

    mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS

    MPC8349E rev3.1 have new spridr,and PVR value,
    The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.

    Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>

commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Date:	Wed Jan 31 11:04:19 2007 +0100

    mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c

    Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
    which is used to se if an slave will ACK after receiving its address.

    Correct i2c probing to use this method as the old method could upset
    a slave as it wrote a data byte to it.

    Add a small delay in i2c_init() to let the controller
    shutdown any ongoing I2C activity.

    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
Author: Timur Tabi <timur@freescale.com>
Date:	Wed Jan 31 15:54:29 2007 -0600

    mpc83xx: Add support for the MPC8349E-mITX-GP

    Add support for the MPC8349E-mITX-GP, a stripped-down version of the
    MPC8349E-mITX.  Bonus features include support for low-boot (BMS bit in
    HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit fab16807adad350f618024350c6950165c247c72
Author: Timur Tabi <timur@freescale.com>
Date:	Wed Jan 31 15:54:20 2007 -0600

    mpc83xx: Delete sdram_init() for MPC8349E-mITX

    There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
    never does anything.  This patch deletes it.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Jan 19 10:43:26 2007 +0800

    mpc83xx: Fix the LAW1/3 bug

    The patch solves the alignment problem of the local bus access windows to
    render accessible the memory bank and PHY registers of UPC 1 (starting at
    0xf801 0000). What we actually did was to adjust the sizes of the bus
    access windows so that the base address alignment requirement would be met.

    Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
    Signed-off-by: Gridish Shlomi <gridish@freescale.com>
    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 97c4b397dce236a7318b304667bf89e59d08b17c
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jan 30 16:15:31 2007 -0600

    mpc83xx: don't hang if watchdog configured on 8360, 832x

    don't hang if watchdog configured on 8360, 832x

    The watchdog programming model is the same across all 83xx devices;
    make the code reflect that.

commit b70047478570e371ce7223be342ce98afea0f7d6
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jan 30 16:15:21 2007 -0600

    mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt

    protect memcpy to bad address if a local-mac-address is missing from dt

commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Jan 30 16:15:04 2007 -0600

    mpc83xx: make 8360 default environment fdt be 8360 (not 8349)

    make 8360 default environment fdt be 8360 (not 8349)

commit a28899c910024a0226331df07207b1038c300c93
Author: Emilian Medve <Emilian.Medve@freescale.com>
Date:	Tue Jan 30 16:14:50 2007 -0600

    mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC

    The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
    be used for busy-waiting since it strips the 'volatile' property from
    the bd variable. gcc3 was working by pure luck.

    This is a follow on patch to "Fix the UEC driver bug of QE"

commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Jan 30 14:08:30 2007 -0600

    mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead

    The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
    MPC834X class processors.  Change the protections from CONFIG_MPC8349 to
    CONFIG_MPC834X so they are more generic.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Thu Jan 25 13:40:55 2007 -0600

    mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL

commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Jan 24 17:18:37 2007 -0600

    mpc83xx: sort Makefile targets

    reordered targets alphabetically

commit 91e25769771c1164ed63ffca0add49f934ae3343
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date:	Tue Jan 16 11:38:14 2007 -0500

    mpc83xx: U-Boot support for Wind River SBC8349

    I've redone the SBC8349 support to match git-current, which
    incorporates all the MPC834x updates from Freescale since the 1.1.6
    release,  including the DDR changes.

    I've kept all the SBC8349 files as parallel as possible to the
    MPC8349EMDS ones for ease of maintenance and to allow for easy
    inspection of what was changed to support this board.  Hence the SBC8349
    U-Boot has FDT support and everything else that the MPC8349EMDS has.

    Fortunately the Freescale updates added support for boards using CS0,
    but I had to change spd_sdram.c to allow for board specific settings for
    the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
    default if the board doesn't specify a value.)

    Hopefully this should be mergeable as-is and require no whitespace
    cleanups or similar, but if something doesn't measure up then let me
    know and I'll fix it.

    Thanks,
    Paul.

commit 05031db456ab227f3e3752f37b9b812b65bb83ad
Author: Sam Song <samsongshu@yahoo.com.cn>
Date:	Thu Dec 14 19:03:21 2006 +0800

    mpc83xx: Remove a redundant semicolon in mpc8349itx.c

    A redundant semicolon existed in mpc8349itx.c
    should be removed.

    Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>

commit f35f358241c549be3f75cfe2eaa642914275b7ba
Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
Date:	Wed Dec 6 21:23:55 2006 -0500

    mpc83xx: Put the version (and magic) after the HRCW.

    Put the version (and magic) after the HRCW.  This puts it in a fixed
    location in flash, not at the start of flash but as close as we can get.

    Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>

commit 48aecd969171a6e99a55fae04933857787f9a5bd
Author: Dave Liu <r63238@freescale.com>
Date:	Thu Dec 7 21:14:51 2006 +0800

    mpc83xx: Add the MPC832XEMDS board readme

    Add the MPC832XEMDS board readme

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 24c3aca3f1358b113d3215adb5433b156e99f72b
Author: Dave Liu <r63238@freescale.com>
Date:	Thu Dec 7 21:13:15 2006 +0800

    mpc83xx: Add support for the MPC832XEMDS board

    This patch supports DUART, ETH3/4 and PCI etc.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit e080313c32322e15ab5a18eb896a252858c57284
Author: Dave Liu <r63238@freescale.com>
Date:	Thu Dec 7 21:11:58 2006 +0800

    mpc83xx: streamline the 83xx immr head file

    For better format and style, I streamlined the 83xx head files,
    including immap_83xx.h and mpc83xx.h. In the old head files, 1)
    duplicated macro definition appear in the both files; 2) the structure
    of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
    macro definition put inside the each structure. So, I cleaned up the
    structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
    moved the macro definition to mpc83xx.h, Just like MPC8260.

    CHANGELOG

    *streamline the 83xx immr head file

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
Author: Dave Liu <r63238@freescale.com>
Date:	Wed Dec 6 11:38:17 2006 +0800

    mpc83xx: Fix the UEC driver bug of QE

    The patch prevents the GCC tool chain from striping useful code for
    optimization. It will make UEC ethernet driver workable, Otherwise the
    UEC will fail in tx when you are using gcc4.x. but the driver can work
    when using gcc3.4.3.

    CHANGELOG

    *Prevent the GCC from striping code for optimization, Otherwise the UEC
    will tx failed when you are using gcc4.x.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 1 21:11:36 2007 +0100

    [PATCH] Update AMCC Katmai 440SPe eval board support

    This patch updates the recently added Katmai board support. The biggest
    change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
    driver.

    Please note, that still some problems are left with some memory
    configurations. See the driver for more details.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
Author: Stefan Roese <sr@denx.de>
Date:	Thu Mar 1 07:03:25 2007 +0100

    [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ccbc7036648e465697ca298ba51e0e76dda352a0
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Wed Feb 28 01:28:53 2007 +0100

    SC3: fix typo in default environment

commit e344568b1b46af85ec32d815586f91bc115d6223
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Tue Feb 27 20:15:30 2007 +0300

    MCC200: Fixes for update procedure

    - fix logic error in image type handling
    - make sure file system images (cramfs etc.) get stored in flash
      with image header stripped so they can be mounted through MTD

commit 743571145b37182757d4e688a77860b36ee77573
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Feb 27 14:26:04 2007 +0100

    Minor code cleanup.

commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Tue Feb 27 12:40:16 2007 +0300

    MCC200 update - add LCD Progress Indicator

commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
Author: Stefan Roese <sr@denx.de>
Date:	Thu Feb 22 07:43:34 2007 +0100

    [PATCH] get_dev() now unconditionally uses manual relocation

    Since the relocation fix is not included yet and we're not sure how
    it will be added, this patch removes code that required relocation
    to be fixed for now.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
Author: Stefan Roese <sr@denx.de>
Date:	Thu Feb 22 07:40:23 2007 +0100

    [PATCH] Change systemace driver to select 8 & 16bit mode

    As suggested by Grant Likely this patch enables the Xilinx SystemACE
    driver to select 8 or 16bit mode upon startup.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Wed Feb 21 16:52:31 2007 +0100

    [PATCH v3] Add sync to ensure flash_write_cmd is fully finished

    Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
    is fully finished. The sync() is defined in each CPU's io.h file. For
    those CPUs which do not need sync for now, a dummy sync() is defined in
    their io.h as well.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit da04995c7dc6772013a9a0dc5c767f190c402478
Author: Stefan Roese <sr@denx.de>
Date:	Wed Feb 21 13:44:34 2007 +0100

    [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 751bb57107d78978ae08e697c3deba816f5be091
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 13:21:57 2007 +0100

    [PATCH] Fix relocation problem with "new" get_dev() function

    This patch enables the "new" get_dev() function for block devices
    introduced by Grant Likely to be used on systems that still suffer
    from the relocation problems (manual relocation neede because of
    problems with linker script).

    Hopefully we can resolve this relocation issue soon for all platform
    so we don't need this additional code anymore.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d93e2212f962668b3dce091ff5edc33f2347fe37
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 13:17:42 2007 +0100

    [PATCH] Update SystemACE driver for 16bit access

    This patch removes some problems when the Xilinx SystemACE driver
    is used with 16bit access on an big endian platform (like the
    AMCC Katmai).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 13:15:40 2007 +0100

    [PATCH] Clean up Katmai (440SPe) linker script

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 10:57:08 2007 +0100

    [PATCH] Add support for the AMCC Katmai (440SPe) eval board

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 10:51:26 2007 +0100

    [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT

    This patch switches to the desired I2C bus when the date/dtt
    commands are called. This can be configured using the
    CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 10:43:34 2007 +0100

    [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support

    This patch adds support for the DDR2 controller used on the
    440SP and 440SPe. It is tested on the Katmai (440SPe) eval
    board and works fine with the following DIMM modules:

    - Corsair CM2X512-5400C4 (512MByte per DIMM)
    - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
    - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)

    This patch also adds the nice functionality to dynamically
    create the TLB entries for the SDRAM (tlb.c). So we should
    never run into such problems with wrong (too short) TLB
    initialization again on these platforms.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 36d830c9830379045f5daa9f542ac1c990c70068
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 10:35:42 2007 +0100

    [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files

    Since the existing 4xx SPD SDRAM initialization routines for the
    405 SDRAM controller and the 440 DDR controller don't have much in
    common this patch splits both drivers into different files.

    This is in preparation for the 440 DDR2 controller support (440SP/e).

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
Author: Stefan Roese <sr@denx.de>
Date:	Tue Feb 20 10:27:08 2007 +0100

    [PATCH] PPC4xx: Add support for multiple I2C busses

    This patch adds support for multiple I2C busses on the PPC4xx
    platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
    to make use of this feature.

    It also merges the 405 and 440 i2c header files into one common
    file 4xx_i2c.h.

    Also the 4xx i2c reset procedure is reworked since I experienced
    some problems with the first access on the 440SPe Katmai board.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit eb867a76238fb38e952c37871b16d0d7fd61c95f
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:05:45 2007 +0100

    [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers

    Block device read/write is anonymous data; there is no need to use a
    typed pointer.  void * is fine.  Also add a hook for block_read functions

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit 53758fa20e935cc87eeb0519ed365df753a6f289
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:05:38 2007 +0100

    [PATCH 8_9] Add block_write hook to block_dev_desc_t

    Preparation for future patches which support block device writing

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit f4852ebe6ca946a509667eb68be42026f837be76
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:05:31 2007 +0100

    [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros

    Register read/write does not need to be wrapped in a full function.  The
    patch replaces them with macros.

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:05:23 2007 +0100

    [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c

    The code in this file is not a command; it is a device driver.  Put it in
    the correct place.	There are zero functional changes in this patch, it
    only moves the file.

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:05:16 2007 +0100

    [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)

    This patch is in preparation of additional changes to the sysace driver.
    May as well take this opportunity to fixup the inconsistent whitespace since
    this file is about to undergo major changes anyway.

    There are zero functional changes in this patch.  It only cleans up the
    the whitespace.

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit 80ba981d940471fe7e539e64fa3d2bd80002beda
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:05:07 2007 +0100

    [PATCH 4_4] Remove local implementation of isprint() in ft_build.c

    isprint is already defined in ctype.c

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:05:00 2007 +0100

    [PATCH 3_9] Move buffer print code from md command to common function

    Printing a buffer is a darn useful thing.  Move the buffer print code
    into print_buffer() in lib_generic/

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:04:52 2007 +0100

    [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets

    Change the xilinx device drivers and board code to include config.h
    instead of xparameters.h directly.	config.h always includes the
    correct xparameters file.  This change reduces the posibility of
    including the wrong file when adding a new xilinx board port

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Feb 20 09:04:34 2007 +0100

    [PATCH 1_4] Merge common get_dev() routines for block devices

    Each of the filesystem drivers duplicate the get_dev routine.  This change
    merges them into a single function in part.c

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Mon Feb 19 23:09:51 2007 +0100

    MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
    as root file system images.

commit 489c696ae7211218961d159e43e722d74c36fcbc
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date:	Wed Feb 14 14:30:28 2007 +0300

    MCC200: Extensions to Software Update Mechanism

    Update / extend Software Update Mechanism for MCC200 board:

    - Add support for rootfs image added. The environment variables
      "rootfs_st" and "rootfs_nd" can be used to override the default
      values of the image start and end.
    - Remove excessive key check code.
    - Code cleanup.

commit 4be23a12f23f1372634edc3215137b09768b7949
Author: Stefan Roese <sr@denx.de>
Date:	Mon Feb 19 08:23:15 2007 +0100

    [PATCH] Update Sequoia EBC configuration (NOR FLASH)

    As spotted by Matthias Fuchs, the READY input should not be
    enabled for the NOR FLASH on the Sequoia board.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2605e90bf676d48123afe5719a846d2b52b24aac
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Fri Feb 16 07:57:42 2007 +0100

    [PATCH] Added support for the jupiter board.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 497d012e5be0194e1084073d0081eb1a844796b2
Author: Gary Jennejohn <garyj@pollux.denx.de>
Date:	Mon Feb 12 13:11:50 2007 +0100

    LPC2292: patch from Siemens.

commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
Author: Stefan Roese <sr@denx.de>
Date:	Sat Feb 10 08:49:31 2007 +0100

    [PATCH] Add missing p3mx.h file to repository (ups)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Fri Feb 9 10:45:42 2007 +0100

    [Motion-PRO] Preliminary support for the Motion-PRO board.

commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
Author: Stefan Roese <sr@denx.de>
Date:	Wed Feb 7 16:51:08 2007 +0100

    [PATCH] Update some AMCC 4xx board config files (set initrd_high)

    Some boards that can have more than 768MBytes of SDRAM need to
    set "initrd_high", so that the initrd can be accessed by the
    Linux kernel.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 7372ca68227930d03cffa548310524cad5b96733
Author: Stefan Roese <sr@denx.de>
Date:	Fri Feb 2 12:44:22 2007 +0100

    [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards

    Previously the strapping DCR/SDR was read to determine if the internal PCI
    arbiter is enabled or not. This strapping bit can be overridden, so now
    the current status is read from the correct DCR/SDR register.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2aa54f651a42d198673318f07a20c89a43e4d197
Author: Stefan Roese <sr@denx.de>
Date:	Fri Feb 2 12:42:08 2007 +0100

    [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
Author: Stefan Roese <sr@denx.de>
Date:	Thu Feb 1 13:22:41 2007 +0100

    [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file

    When PCI PNP is enabled the pci pnp configuration routine is called
    which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
    problems with some PCI cards. For now disable the PCI PNP configuration.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 2902fadade3be7659467e8d074048c6b7068f5c0
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 31 16:56:10 2007 +0100

    [PATCH] Update 440EPx/440GRx cpu detection

    Signed-off-by: Stefan Roese <sr@denx.de>

commit d5ea287b02a6945c3977410e364a879dd1a555c8
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 31 16:38:04 2007 +0100

    [PATCH] Update esd cpci5200 files

    Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 31 16:37:34 2007 +0100

    [PATCH] Add support for esd mecp5200 board

    Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
Author: Stefan Roese <sr@denx.de>
Date:	Wed Jan 31 12:38:50 2007 +0100

    [PATCH] Remove unneccessary yellowstone board config file

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e802594b6fa1b166308820c276b96dc0d7cc731c
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jan 30 17:06:10 2007 +0100

    [PATCH] Update Sequoia (440EPx) config file

    The config file now handles the 2nd target, the Rainier (440GRx)
    evaluation board better. Additionally the PPC input clock was
    adjusted to match the correct value of 33.0 MHz.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 700200c67e73b83751418abe7815840dca8fd6cb
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jan 30 17:04:19 2007 +0100

    [PATCH] Merge Yosemite & Yellowstone board ports

    Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
    share one config file and all board specific files. This way we
    don't have to maintain two different sets of files for nearly
    identical boards.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jan 30 15:01:49 2007 +0100

    [PATCH] Update Prodrive SCPU (PDNB3 variant) board

    SCPU doesn't use redundant environment in flash.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
Author: Stefan Roese <sr@denx.de>
Date:	Tue Jan 30 12:51:07 2007 +0100

    [PATCH] alpr: Update alpr board config file

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f8db84f132b1e335f20f96138a1f09ed97b08664
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Jan 30 00:50:40 2007 +0100

    LPC2292 SODIMM port coding style cleanup.

commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
Author: Gary Jennejohn <garyj@pollux.denx.de>
Date:	Wed Jan 24 12:16:56 2007 +0100

    Add port for the lpc2292sodimm evaluation board from EmbeddedArtists

commit 2daf046ba627f85f44195815778140039636244e
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Jan 23 17:22:06 2007 +0100

    [iDMR] Add MTD and JFFS2 support, also add default partition definition.

commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Jan 23 14:21:14 2007 +0100

    [iDMR] Flash driver on initialisation write-protects some sectors,
    currently sectors 0-3. Sector 3 does not need to be protected, though
    (U-boot occupies sectors 0-1 and the environment sector 2). This commit
    fixes this, i.e., only sectors 0-2 are protected.

commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Jan 23 14:11:22 2007 +0100

    [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
    "mii device" results in "Unexpected exception"). Fixing this properly
    requires some clean-up in the FEC drivers infrastructure for ColdFire, so
    this commit disables MII commads for now.

commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Tue Jan 23 13:25:22 2007 +0100

    [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
    Identification Register (CIR).

commit fdef388758506765d4d6a7155c8f1584c63ff581
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Mon Jan 22 13:19:21 2007 +0800

    use  CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
    The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
    fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
    mpc7448hpc2 board.

commit a4012396645533aef218354eeba754dff0deace8
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Fri Jan 19 23:08:39 2007 +0100

    Minor code cleanup.

commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Fri Jan 19 19:57:10 2007 +0100

    [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Fri Jan 19 18:05:26 2007 +0100

    [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
		 if you must swap the bytes between reading/writing.
		 (Needed for the SC3 board)

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 18 16:05:47 2007 +0100

    [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 18 11:54:52 2007 +0100

    [PATCH] Update Prodrive P3Mx support

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 34167a36c29ee946b727465db5c014746a08e978
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 18 11:48:10 2007 +0100

    [PATCH] Add missing Taishan config file

    Signed-off-by: Stefan Roese <sr@denx.de>

commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Thu Jan 18 11:28:51 2007 +0100

    [PATCH] Fix: Compilerwarnings for SC3 board.
		 The EBC Configuration Register is now by CFG_EBC_CFG definable
		 Added JFFS2 support for the SC3 board.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
Author: Stefan Roese <sr@denx.de>
Date:	Thu Jan 18 10:25:34 2007 +0100

    [PATCH] Add support for AMCC Taishan PPC440GX eval board

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Jan 16 18:30:50 2007 +0100

    Raname solidcard3 into sc3; add redundant env for sc3

commit 1bbbbdd20fcec9933697000dcf55ff7972622596
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Jan 16 12:46:35 2007 +0100

    Update default environment for Solidcard3

commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
Author: Stefan Roese <sr@denx.de>
Date:	Mon Jan 15 09:46:29 2007 +0100

    [PATCH] Fix 440SPe rev B detection from previous patch

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a443d31410c571ee8f970da819a44d698fdd6b1f
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Sun Jan 14 13:35:31 2007 +0100

	[FIX] correct I2C Writes for the LM81 Sensor.

	Signed-off-by: Heiko Schocher <hs@denx.de>

commit 0bba5452835f19a61204edcda3a58112fd8e2208
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sat Jan 13 11:17:10 2007 +0100

    Undo commit 3033ebb2: reset command does not take any arguments

    Haiying Wang's modification to the reset command was broken, undo it.

    Signed-off-by: Wolfgang Denk <wd@denx.de>

commit 95981778cff0038fd9941044d6a3eda810e33258
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 13 08:01:03 2007 +0100

    [PATCH] Update 440SP(e) cpu revisions

    Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 13 07:59:56 2007 +0100

    [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed

    Now the board revision and the current PCI bus speed are printed after
    the board message.

    Also the EBC initialising is now done via defines in the board config
    file.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 36adff362c2c0141ff8a810d42a7e478f779130f
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 13 07:59:19 2007 +0100

    [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed

    Now the board revision and the current PCI bus speed are printed after
    the board message.

    Also the EBC initialising is now done via defines in the board config
    file.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 13 07:57:51 2007 +0100

    [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed

    Now the board revision and the current PCI bus speed are printed after
    the board message.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ca43ba18e910206ef8063e4b22d282630bff3fd2
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Thu Jan 11 15:44:44 2007 +0100

	Added support for the SOLIDCARD III board from Eurodesign

	Signed-off-by: Heiko Schocher <hs@denx.de>

commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
Author: Reinhard Thies <Reinhard.Thies@web.de>
Date:	Wed Jan 10 14:41:14 2007 +0100

    Adjusted default environment for cam5200 board.

commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Wed Jan 10 15:35:52 2007 +0100

    Update CHANGELOG

commit 787fa15860a57833e50bd30555079a9cd4e519b8
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Wed Jan 10 01:28:39 2007 +0100

    Fix auto_update for MCC200 board.

    The invocation of do_auto_update() is moved to the end of the
    misc_init_r() function, after the flash mappings have been
    initialized. Please find attached a patch that implements that
    change.

    Also correct the decoding of the keypad status. With this update, the
    key that will trigger the update is Column 2, Row 2.

commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Wed Jan 10 00:26:15 2007 +0100

    CAM5200 flash driver modifications:
    - use CFI driver (replaces custom flash driver) for main 'cam5200' target
    - add second build target 'cam5200_niosflash' which still uses custom driver

commit 67fea022fa957f59653b5238c7496f80a6b70432
Author: Markus Klotzbuecher <mk@denx.de>
Date:	Tue Jan 9 16:02:48 2007 +0100

    SPC1920: cleanup memory contoller setup

commit 8fc2102faa23593c80381437c09f7745a14deb40
Author: Markus Klotzbuecher <mk@denx.de>
Date:	Tue Jan 9 14:57:14 2007 +0100

    Fix the cpu speed setup to work with all boards.

commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
Author: Markus Klotzbuecher <mk@denx.de>
Date:	Tue Jan 9 14:57:13 2007 +0100

    SPC1920: add support for the FM18L08 Ramtron FRAM

commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
Author: Markus Klotzbuecher <mk@denx.de>
Date:	Tue Jan 9 14:57:13 2007 +0100

    SPC1920: update the HPI register addresses to work with the second
    generation of hardware

commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
Author: Markus Klotzbuecher <mk@creamnet.de>
Date:	Tue Jan 9 14:57:13 2007 +0100

    Miscellanious spc1920 related cleanups

commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
Author: Markus Klotzbuecher <mk@denx.de>
Date:	Tue Jan 9 14:57:12 2007 +0100

    SPC1920 GO/NOGO led should be set to color red in U-Boot

commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
Author: Markus Klotzbuecher <mk@creamnet.de>
Date:	Tue Jan 9 14:57:12 2007 +0100

    Add support for the DS3231 RTC

commit 8139567b60d678584b05f0718a681f2047c5e14f
Author: Markus Klotzbuecher <mk@creamnet.de>
Date:	Tue Jan 9 14:57:11 2007 +0100

    SMC1 uses external CLK4 instead of BRG on spc1920

commit d8d9de1a02fbd880b613d607143d1f57342affc7
Author: Markus Klotzbuecher <mk@creamnet.de>
Date:	Tue Jan 9 14:57:10 2007 +0100

    Update the SPC1920 CMB PLD driver

commit 3f34f869162750e5e999fd140f884f5de952bcfe
Author: Markus Klotzbuecher <mk@creamnet.de>
Date:	Tue Jan 9 14:57:10 2007 +0100

    Add / enable I2C support on the spc1920 board

commit d28707dbce1e9ac2017ad051da4133bf22b4204f
Author: Markus Klotzbuecher <mk@creamnet.de>
Date:	Tue Jan 9 14:57:10 2007 +0100

    Add support for the tms320671x host port interface (HPI)

commit f4eb54529bb3664c3a562e488b460fe075f79d67
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sun Jan 7 00:13:11 2007 +0100

    Prepare for release 1.2.0

commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 6 15:58:09 2007 +0100

    [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)

    This patch fixes a problem with an incorrect setup for the refresh
    timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c

    Signed-off-by: Stefan Roese <sr@denx.de>

commit f16c1da9577f06c5fc08651a4065537407de4635
Author: Stefan Roese <sr@denx.de>
Date:	Sat Jan 6 15:56:13 2007 +0100

    [PATCH] Update ALPR board files

    This update brings the ALPR board support to the newest version.
    It also fixes a problem with the NAND driver.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit cd1d937f90250a32988c37b2b4af8364d25de8ed
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jan 5 11:46:05 2007 +0100

    [PATCH] nand: Fix problem with oobsize calculation

    Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:

    The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
    returns a 0x15. In the code fragment below bits [1:0] determine the
    page size, it is ANDed via "(extid & 0x3)" then shifted out. The
    next field is also ANDed with 0x3. However this is a one bit field
    as defined in the Hynix and Samsung parts in the 4th ID byte that
    determins the oobsize, not a two bit field. It works on Samsung as
    bits[3:2] are 01. However for the Hynix there is a 11 in these two
    bits, so the oob size gets messed up.

    I checked the correct linux code and the suggested fix from Brian is
    also available in the linux nand mtd driver.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jan 5 10:40:36 2007 +0100

    [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)

    This fix will make the MAL burst disabling patch for the Linux
    EMAC driver obsolete.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 023889838282b6237b401664f22dd22dfba2c066
Author: Stefan Roese <sr@denx.de>
Date:	Fri Jan 5 10:38:05 2007 +0100

    [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board

    This code will optimize the DDR2 controller setup on a board specific
    basis.

    Note: This code doesn't work right now on the NAND booting image for the
    Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit cce4acbb68398634b8d011ed7bb0d12269c84230
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Thu Dec 28 19:08:21 2006 +0100

    Few V38B changes:
      - fix a typo in V38B config file
      - move watchdog initialisation earlier in the boot process
      - add "wdt=off" to default kernel command line (disables kernel watchdog)

commit 92eb729bad876725aeea908d2addba0800620840
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Wed Dec 27 01:26:13 2006 +0100

    Fix bug in adaption of Stefano Babic's CFI driver patch.

commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sun Dec 24 01:42:57 2006 +0100

    Minor code cleanup.

commit d784fdb05900ada3686d5778783e1fb328e9fb66
Author: Stefano Babic <sbabic@denx.de>
Date:	Tue Dec 12 00:22:42 2006 +0100

    Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)

commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
Author: Stefan Roese <sr@denx.de>
Date:	Fri Dec 22 14:29:40 2006 +0100

    [PATCH] Fix sequoia flash autodetection (finally correct)

    Now 32MByte and 64MByte FLASH is know to work and other
    configurations should work too.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 82e5236a8b719543643fd26d5827938ab2b94818
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Fri Dec 22 10:30:26 2006 +0100

    Minor code cleanup; update CHANGELOG.

commit fa23044564091f05d9695beb7b5b9a931e7f41a4
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Thu Dec 21 17:17:02 2006 +0100

    Added support for the TQM8272 board from TQ

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
Author: Heiko Schocher <hs@pollux.denx.de>
Date:	Thu Dec 21 16:14:48 2006 +0100

    [PATCH] Add support for the UC101 board from MAN.

    Signed-off-by: Heiko Schocher <hs@denx.de>

commit c84bad0ef60e7055ab0bd49b93069509cecc382a
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Dec 20 00:29:43 2006 +0100

    Fix to make the baudrate changes immediate for the MCF52x2 family.

commit daa6e418bcc0c717752e8de939c213c790286096
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Dec 20 00:27:32 2006 +0100

    Preliminary support for the iDMR board (ColdFire).

commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
Author: Andrei Safronov <safronov@pollux.denx.de>
Date:	Fri Dec 8 16:23:08 2006 +0100

    automatic update mechanism

commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Mon Dec 4 17:56:59 2006 +0800

    Slight code clean up.
    Add comments, delete duplicate define and remove spaces.
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Mon Dec 4 17:54:21 2006 +0800

    Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
    multiplier table can not refect the real PLL clock behavior of these
    processors. Please refer to the hardware specification for detailed
    information of the corresponding processors.
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Mon Dec 4 14:46:23 2006 +0800

    Remove the static MAC address, ip address, server ip, netmask and
    gateway ip for network setting.
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Mon Dec 4 14:33:08 2006 +0800

    Remove the duplicate memory test code for mpc744ihpc2 board.
    If a memory test is needed, please use the functions in
    post/memory.c or memtest command.
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Fri Dec 1 19:01:25 2006 +0800

    Fix the exception occuring in RAM table search issue.
    The original search_one_table() function code can only processes the search
    for the exception occurring in FLASH/ROM, because the exception and fixup
    table usually locate in FLASH. If the exception address is also in
    FLASH, it will be OK.
    If the exception occurs in RAM, after the u-boot relocation, a
    relocation offset should be added.

    clean up the code in cpu/74xx_7xx/cpu.c

    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit ee311214e0d216f904feea269599d0934bf71f23
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Fri Dec 1 11:47:36 2006 +0800

    Clean up the code according to codestyle:
    (1) remove some C++ comments.
    (2) remove trailing white space.
    (3) remove trailing empty line.
    (4) Indentation by table.
    (5) remove {} in one line condition.
    (6) add space before '(' in function call.
    Remove some weird printf () output.
    Add necessary comments.
    Modified Makefile to support building in a separate directory.

commit dd520bf314c7add4183c5191692180f576f96b60
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Thu Nov 30 18:02:20 2006 +0100

    Code cleanup.

commit 8d9a8610b8256331132227e9e6585c6bd5742787
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Thu Nov 30 01:54:07 2006 +0100

    Code cleanup. Update CHANGELOG.

commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Wed Nov 29 16:23:42 2006 +0100

    [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals

    The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
    not the XLB frequency.

    This patch depends on the previous patches for MPC52xx device tree support

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
    Signed-off-by: Sylvain Munaut <tnt@246tNt.com>

commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 29 15:42:37 2006 +0100

    [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards

    This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
    and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
    quite similar and share the same board directory "prodrive/p3mx"
    and the same config file "p3mx.h".

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 29 12:53:15 2006 +0100

    [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command

    In the bootvx command the load address was only read from the env
    variable "loadaddr" and not optionally passed as paramter as described
    in the help. This is fixed with this patch. The behaviour is now the
    same as in the bootelf command.

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 29 12:03:57 2006 +0100

    [PATCH] include/ppc440.h minor error affecting interrupts

    Fixed include/ppc440.c for UIC address Bug

    Corrects bug affecting the addresses for the universal interrupt
    controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.

    Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:	Tue Nov 28 16:17:27 2006 -0600

    Make fsl-i2c not conflict with SOFT I2C

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 14198bf768fdc958e3c1afd2404e5262208e98d7
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Date:	Tue Nov 28 16:17:18 2006 -0600

    Fix I2C master address initialization.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Nov 28 23:31:19 2006 -0600

    Assign maintainers for mpc8349emds and mpc8360emds

    Dave for mpc8360emds, and me for mpc8349emds.

commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Tue Nov 28 23:28:33 2006 -0600

    Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c

    give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
    since they are passed by reference to ucc_get_cmxucr_reg and assigned.

commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
Author: Timur Tabi <timur@freescale.com>
Date:	Tue Nov 28 12:09:35 2006 -0600

    mpc83xx: Miscellaneous code style fixes

    Implement various code style fixes and similar changes.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 28 17:55:49 2006 +0100

    [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.

    This patch adds the code and configuration necessary to boot with an
    arch/powerpc Linux kernel.

    Signed-off-by: Grant Likely <grant.likely@gmail.com>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit e732faec95a83cb468b4850ae807c8301dde8f6a
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 28 16:09:24 2006 +0100

    [PATCH] PPC4xx: 440SP Rev. C detection added

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 28 11:04:45 2006 +0100

    [PATCH] nand: Fix patch merge problem

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
Author: Stefan Roese <sr@denx.de>
Date:	Tue Nov 28 11:04:45 2006 +0100

    [PATCH] nand: Fix patch merge problem

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Mon Nov 27 22:53:53 2006 +0100

    Update CHANGELOG

commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 17:43:25 2006 +0100

    [PATCH] 4xx_enet.c: Correct the setting of zmiifer register

    Patch below corrects the setting of the zmiifer register, it was
    overwritting the register rather than ORing the settings.

    Signed-off-by: Neil Wilson <NWilson@airspan.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit d1a72545296800b7e219f93104ad5836f0003d66
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 17:34:10 2006 +0100

    [PATCH] Select NAND embedded environment from board configuration

    The current NAND Bootloader setup forces the environment
    variables to be in line with the bootloader. This change
    enables the configuration to be made in the board include
    file instead so that it can be individually enabled.

    Signed-off-by: Nick Spence <nick.spence@freescale.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 15784862857c3c2214498defcfed84ff137fb81e
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 17:22:19 2006 +0100

    [PATCH] nand_wait() timeout fixes

    Two fixes for the nand_wait() function in
    drivers/nand/nand_base.c:

    1. Use correct timeouts. The original timeouts in Linux
    source are 400ms and 20ms not 40s and 20s

    2. Return correct error value in case of timeout. 0 is
    interpreted as OK.

    Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit da5553b095bf04f4f109ad7e565dae3aba47b230
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 17:04:06 2006 +0100

    [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel

    This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
    arguments to bootm.  It removes the getenv("disable_of") test that used
    to be used for this purpose.

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit a9398e018593782c5fa7d0741955fc1256b34c1e
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Mon Nov 27 15:32:42 2006 +0100

    Minor code cleanup. Update CHANGELOG.

commit 1729b92cde575476684bffe819d0b7791b57bff2
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 14:52:04 2006 +0100

    [PATCH] 4xx: Fix problem with board specific reset code (now for real)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 14:49:51 2006 +0100

    [PATCH] alpr: remove unused board specific flash driver

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 14:48:41 2006 +0100

    [PATCH] 4xx: Fix problem with board specific reset code

    Signed-off-by: Stefan Roese <sr@denx.de>

commit ec0c2ec725aec9524a177a77ce75559e644a931a
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 14:46:06 2006 +0100

    [PATCH] Remove testing 4xx enet PHY setup

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 27 14:12:17 2006 +0100

    [PATCH] Update Prodrive ALPR board support (440GX)

    Signed-off-by: Stefan Roese <sr@denx.de>

commit 78d620ebb5871d252270dedfad60c6568993b780
Author: Wolfgang Denk <wd@atlas.denx.de>
Date:	Thu Nov 23 22:58:58 2006 +0100

    Updates for TQM5200 modules:
    - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
    - simplify "udate" definitions

commit 2053283304eeddf250d109e6791eb6fa4cad14f7
Author: Stefan Roese <sr@denx.de>
Date:	Wed Nov 22 13:20:50 2006 +0100

    [PATCH] PPC4xx start.S: Fix for processor errata

    Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
    errata 1.12: 440_33 by moving patch up in code.

    Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 4ef6251403f637841000e0fef9e832aa01339822
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 20 20:39:52 2006 +0100

    [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH

    Signed-off-by: Stefan Roese <sr@denx.de>

commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Mon Nov 20 10:28:30 2006 +0100

    Update CHANGELOG

commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
Author: Stefan Roese <sr@denx.de>
Date:	Mon Nov 13 13:55:24 2006 +0100

    [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]

       * Adds support for AMD command set Top Boot flash geometry reversal
       * Adds support for reading JEDEC Manufacturer ID and Device ID
       * Adds support for displaying command set, manufacturer id and
	 device ids (flinfo)
       * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
       * Removes outdated change history (refer to git log instead)

    Signed-off-by: Tolunay Orkun <listmember@orkun.us>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit b21b511d4c50408f4853f46f06b601272196223f
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sun Nov 12 21:13:23 2006 +0100

    Update CHANGELOG

commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Sat Nov 11 22:48:22 2006 +0100

    Disable the watchdog in the default config for the V38B board.

commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Sat Nov 11 22:43:00 2006 +0100

    Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
    group is enabled for USB earlier (in cpu_init_f() instead of
    usb_lowlevel_init()).

commit 91650b3e4de688038d4f71279c44858e3e2c6870
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Mon Nov 6 17:06:36 2006 +0100

    Sequential accesses to non-existent memory must be synchronized,
    at least on G2 cores.

    This fixes get_ram_size() problems on MPC5200 Rev. B boards.

commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Nov 3 19:15:00 2006 -0600

    mpc83xx: Update 83xx to use fsl_i2c.c

    Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
    cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
    Added multiple I2C bus support to fsl_i2c.c.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit d239d74b1c937984bc519083a8e7de373a390f06
Author: Timur Tabi <timur@freescale.com>
Date:	Fri Nov 3 12:00:28 2006 -0600

    mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR

    Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
    tree matches the other 8xxx trees.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit f7fb2e703ec9688541416962724adff70a7322cb
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Thu Nov 2 19:47:11 2006 -0600

    mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c

commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
Author: Dave Liu <daveliu@freescale.com>
Date:	Thu Nov 2 18:05:50 2006 -0600

    mpc83xx: Fix the incorrect dcbz operation

    The 834x rev1.x silicon has one CPU5 errata.

    The issue is when the data cache locked with
    HID0[DLOCK], the dcbz instruction looks like no-op inst.

    The right behavior of the data cache is when the data cache
    Locked with HID0[DLOCK], the dcbz instruction allocates
    new tags in cache.

    The 834x rev3.0 and later and 8360 have not this bug inside.

    So, when 834x rev3.0/8360 are working with ECC, the dcbz
    instruction will corrupt the stack in cache, the processor will
    checkstop reset.

    However, the 834x rev1.x can work with ECC with these code,
    because the sillicon has this cache bug. The dcbz will not
    corrupt the stack in cache.
    Really, it is the fault code running on fault sillicon.

    This patch fix the incorrect dcbz operation. Instead of
    CPU FP writing to initialise the ECC.

    CHANGELOG:
    * Fix the incorrect dcbz operation instead of CPU FP
    writing to initialise the ECC memory. Otherwise, it
    will corrupt the stack in cache, The processor will checkstop
    reset.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Nov 1 00:10:40 2006 -0600

    mpc83xx: add OF_FLAT_TREE bits to 83xx boards

    add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
    STDOUT_PATH configuration bits to mpc8349emds,
    mpc8349itx, and mpc8360emds board code.

    redo environment to use bootm with the fdtaddr
    for booting ARCH=powerpc kernels by default,
    and provide default fdtaddr values.

commit 48041365b3420589ad464ebc7752e0053538b729
Author: Kim Phillips <kim.phillips@freescale.com>
Date:	Wed Nov 1 00:07:25 2006 -0600

    mpc83xx: change ft code to modify local-mac-address property

    Update 83xx OF code to update local-mac-address properties
    for ethernet instead of the obsolete 'address' property.

commit 9ca880a250870a7d55754291b5591d2b5fe89b54
Author: Timur Tabi <timur@freescale.com>
Date:	Tue Oct 31 21:23:16 2006 -0600

    mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS

    This patch also adds an improved I2C set_speed(), which handles all clock
    frequencies.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit ac4b5622ce050b5ee1e154b98df630d778661632
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 31 19:54:59 2006 -0600

    mpc83xx: add the README.mpc8360emds

    add doc/README.mpc8360emds to accompany the new board support

commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 3 12:11:15 2006 -0600

    mpc83xx: add QE ethernet support

    this patch adds support for the QUICC Engine based UCC gigabit ethernet device.

commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
Author: Dave Liu <daveliu@freescale.com>
Date:	Fri Nov 3 19:33:44 2006 -0600

    mpc83xx: Add MPC8360EMDS basic board support

    Add support for the Freescale MPC8360EMDS board.
    Includes DDR, DUART, Local Bus, PCI.

commit 23892e49352de74f7fac36ff90bb1be143d195e3
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 31 19:30:40 2006 -0600

    mpc83xx: add the QUICC Engine (QE) immap file

    common QE immap file.  Also required for 8360.

commit b701652a4992bdcc62fb1a6038a85beef9e55da4
Author: Dave Liu <daveliu@freescale.com>
Date:	Tue Oct 31 19:25:38 2006 -0600

    mpc83xx: Add 8360 specifics to 83xx immap

    Mainly add QE device dependencies, with appropriate 8360 protection.
    Lindent also run.

commit 988833324a7fda482c8ac3ca23eb539f8232e404
Author: Timur Tabi <timur@freescale.com>
Date:	Tue Oct 31 19:14:41 2006 -0600

    mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX

    PREREQUISITE PATCHES:

    * This patch can only be applied after the following patches have been applied:

      1) DNX#2006092142000015 "Add support for the MPC8349E-mITX  1/2"
      2) DNX#2006092142000024 "Add support for the MPC8349E-mITX  2/2"

    CHANGELOG:

    * For the 8349E-mITX, fix some size values in pci_init_board(), enable
      the clock for the 2nd USB board (Linux kernel will hang otherwise),
      and fix the CONFIG_BOOTARGS macro.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
Author: Timur Tabi <timur@freescale.com>
Date:	Tue Oct 31 18:44:42 2006 -0600

    mpc83xx: Add support for the MPC8349E-mITX

    PREREQUISITE PATCHES:

    * This patch can only be applied after the following patches have been applied:

      1) DNX#2006090742000024 "Add support for multiple I2C buses"
      2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
      3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
      4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
      5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

    CHANGELOG:

    * Add support for the Freescale MPC8349E-mITX reference design platform.
      The second TSEC (Vitesse 7385 switch) is not supported at this time.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 183da6d9b446cc12123455844ad1187e2375626f
Author: Ben Warren <bwarren@qstreams.com>
Date:	Tue Sep 12 10:15:53 2006 -0400

    Additional MPC8349 support for multibus i2c

    Hello,

    Here is a patch for a file that was accidentally left out of a previous
    attempt.

    It accompanies the patch with ticket DNX#2006090742000024

    CHANGELOG:
	    Change PCI initialization to use new multi-bus I2C API.

    regards,
    Ben

commit b24f119d672b709d153ff2ac091d4aa63ec6877d
Author: Ben Warren <bwarren@qstreams.com>
Date:	Thu Sep 7 16:51:04 2006 -0400

    Multi-bus I2C implementation of MPC834x

    Hello,

    Attached is a patch implementing multiple I2C buses on the MPC834x CPU
    family and the MPC8349EMDS board in particular.
    This patch requires Patch 1 (Add support for multiple I2C buses).
    Testing was performed on a 533MHz board.

    /*** Note: This patch replaces ticket DNX#2006083042000027 ***/

    Signed-off-by: Ben Warren <bwarren@qstreams.com>

    CHANGELOG:
	    Implemented driver-level code to support two I2C buses on the
    MPC834x CPU family and the MPC8349EMDS board.  Available I2C bus speeds
    are 50kHz, 100kHz and 400kHz on each bus.

    regards,
    Ben

commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
Author: Ben Warren <bwarren@qstreams.com>
Date:	Thu Sep 7 16:50:54 2006 -0400

    Add support for multiple I2C buses

    Hello,

    Attached is a patch providing support for multiple I2C buses at the
    command level.  The second part of the patch includes an implementation
    for the MPC834x CPU and MPC8349EMDS board.

    /*** Note: This patch replaces ticket DNX#2006083042000018 ***/

    Signed-off-by: Ben Warren <bwarren@qstreams.com>

    Overview:

    1. Include new 'i2c' command (based on USB implementation) using
    CONFIG_I2C_CMD_TREE.

    2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS.  Note that
    the commands to change bus number and speed are only available under the
    new 'i2c' command mentioned in the first bullet.

    3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
    systems.  When CONFIG_I2C_MULTI_BUS is used, this option takes the form
    of an array of bus-device pairs.  Otherwise, it is an array of uchar.

    CHANGELOG:
	    Added new 'i2c' master command for all I2C interaction.  This is
    conditionally compiled with CONFIG_I2C_CMD_TREE.  New commands added for
    setting I2C bus speed as well as changing the active bus if the board
    has more than one (conditionally compiled with
    CONFIG_I2C_MULTI_BUS).  Updated NOPROBE logic to handle multiple buses.
    Updated README.

    regards,
    Ben

commit bed85caf872714ebf53013967a695c9d63acfc68
Author: Timur Tabi <timur@freescale.com>
Date:	Tue Oct 31 18:13:36 2006 -0600

    mpc83xx: Add support for Errata DDR6 on MPC 834x systems

    CHANGELOG:

    * Errata DDR6, which affects all current MPC 834x processors, lists changes
      required to maintain compatibility with various types of DDR memory.  This
      patch implements those changes.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit afd6e470f639883002c7c59d562690a5cb0f4865
Author: Timur Tabi <timur@freescale.com>
Date:	Wed Oct 25 18:45:23 2006 -0500

    mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it

commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
Author: Timur Tabi <timur@freescale.com>
Date:	Tue Aug 22 17:07:00 2006 -0500

    mpc83xx: Add support for variable flash memory sizes on 83xx systems

    CHANGELOG:

    * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
       window registers, instead of using a hard-coded value of 8MB.

    Signed-off-by: Timur Tabi <timur@freescale.com>

commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
Author: Tanya Jiang <tanya.jiang@freescale.com>
Date:	Thu Aug 3 18:38:13 2006 +0800

    mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros

    Unified TQM834x variable names with 83xx and consolidated macro
    in preparation for the 8360 and other upcoming 83xx devices.

    Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>

commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
Author: Dave Liu <daveliu@freescale.com>
Date:	Wed Oct 25 14:41:21 2006 -0500

    mpc83xx: Changed to unified mpx83xx names and added common 83xx changes

    Incorporated the common unified variable names and the changes in preparation
    for releasing mpc8360 patches.

    Signed-off-by: Dave Liu <daveliu@freescale.com>

commit 3894c46c27c64891f93ac04edde86a9fa9758d92
Author: Tanya Jiang <tanya.jiang@freescale.com>
Date:	Thu Aug 3 18:36:02 2006 +0800

    mpc83xx: Fix missing build for mpc8349emds pci.c

    Make pci build for mpc8349emds

    Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>

commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
Author: Tanya Jiang <tanya.jiang@freescale.com>
Date:	Thu Aug 3 18:39:49 2006 +0800

    mpc83xx: Removed unused file resetvec.S for mpc83xx cpu

    Removed unused file resetvec.S for mpc83xx cpu

    Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>

commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
Author: Nick Spence <Nick.Spence@freescale.com>
Date:	Sat Sep 30 00:32:59 2006 -0700

    NAND Flash verify across block boundaries

    This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
    defined
    and the write crosses a block boundary. The pointer to the verification
    buffer (bufstart) is not being updated to reflect the starting of the
    new
    block so the verification of the second block fails.

    CHANGELOG:

    * Fix NAND FLASH page verification across block boundaries

commit f484dc791a3932537213c43c654cc1295c64b84c
Author: Nick Spence <nick.spence@freescale.com>
Date:	Thu Sep 7 07:39:46 2006 -0700

    Added RGMII support to the TSECs and Marvell 881111 Phy

    Added a phy initialization to adjust the RGMII RX and TX timing
    Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode

    Signed-off-by: Nick Spence <nick.spence@freescale.com>

commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Fri Nov 3 13:10:00 2006 +0800

    Remove some unused CFG define.
    undef CFG_DRAM_TEST

commit 99c09c4dec34f77c243bf51bea532e3f339410ad
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Fri Nov 3 13:07:36 2006 +0800

    Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
    Both work. 0xFF000000 seems more reasonable.

commit c59200443072353044aa4bf737a5a60f9a9af231
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Thu Nov 2 15:15:01 2006 +0100

    Release U-Boot 1.1.6

commit c1fbe4103a0d6c8957f912af902d705ba67836f2
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 19:14:48 2006 +0800

    This patch comes from Yuli's posted patch on 8/8/2006
    titled "CFI Driver Little-Endian write Issue".

    http://sourceforge.net/mailarchive/message.php?msg_id=36311999

    If that patch applied, please discard this one.
    Until now , I do not see his patch is applied. So please apply this one.

    Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit b825f158e449e1e9cf74c08e572955e122394c96
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 19:12:31 2006 +0800

    Tsi108 on chip i2c support.

    The i2c  Interface provides a master-only, serial interface that can be
    used for initializing Tsi108/Tsi109 registers from an EEPROM after a
    device reset.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 19:11:06 2006 +0800

    Tsi108 on chip pci controller support.

    If there is no pci card, the tsi108/109 pci configure read will
    cause a machine check exception to the processor. PCI error should
    also be cleared after the read.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit d1927cee977126e547ceeba23e4f978f377cfb8f
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 19:08:55 2006 +0800

    Tundra tsi108 on chip Ethernet controller support.

    The following is a brief description of the Ethernet controller:
    The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
    Gigabit Ethernet ports,E0 and E1.  It uses a single Management interface
    to manage the two physical connection devices (PHYs).  Each Ethernet port
    has its own statistics monitor that tracks and reports key interface
    statistics.  Each port supports a 256-entry hash table for address
    filtering.	In addition, each port is bridged to the Switch Fabric
    through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.

    Each Ethernet port also has a pair of internal Ethernet DMA channels to
    support the transmit and receive data flows.  The Ethernet DMA channels
    use descriptors set up in memory, the memory map of the device, and
    access via the Switch Fabric.  The Ethernet Controller?s DMA arbiter
    handles arbitration for the Switch Fabric.	The Controller also
    has a register businterface for register accesses and status monitor
    control.

    The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
    modes.  The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
    The GMII and TBI modes are used to connect with Gigabit PMDs.  Internal
    data flows to and from the Ethernet Controller through the Switch Fabric.

    Each Ethernet port uses its transmit and receive DMA channels to manage
    data flows through buffer descriptors that are predefined by the
    system (the descriptors can exist anywhere in the system memory map).
    These descriptors are data structures that point to buffers filled
    with data ready to transmit over Ethernet, or they point to empty
    buffers ready to receive data from Ethernet.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 19:01:33 2006 +0800

    Tundra tsi108 header file.

    The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
    PowerPC processors that offers numerous system interconnect options for
    embedded application designers. The Tsi108 can interconnect 60x or
    MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
    and Flash. Provided the macro define for tsi108 chip.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 87c4db09699c6b89176b31004afcb83eb1585d47
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 18:59:15 2006 +0800

    Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
    mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 27801b8ab11c61b577e45742a515bb3b23b80241
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 18:57:21 2006 +0800

    Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
    Make ,config.mk and link file for the mpc7448hpc2 board.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 18:55:04 2006 +0800

    Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
    The mpc7448hpc2 board support header file.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 625bb5ddb50b243f931262ca8c46956409471917
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 18:52:21 2006 +0800

    Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
    The mpc7448hpc2 board support low level assemble language init code.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 4c52783b3d024e153c4972b97332e314bc3bdc46
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 18:49:51 2006 +0800

    General code modification for mpc7448hpc2 board support.
    1. Add 7447A and 7448 processor support.
    2. Add the following flags.

    CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
    (such as by switch on board), this flag should be set.

    CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
    relocates to RAM, this flag should be set.

    CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
    system hang in exception, this flag should be set.

    There is a design issue for tsi108/109 pci configure  read. When pci scan
    the slots, if there is no pci card, the tsi108/9 will cause a machine
    check exception for mpc7448 processor.

    Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
Author: roy zang <tie-fei.zang@freescale.com>
Date:	Thu Nov 2 18:34:47 2006 +0800

    Add README file for mpc7448hpc2 board.
    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Nov 1 02:04:38 2006 +0100

    Finish up support for MarelV38B board
     - add watchdog support
     - enable GPIO_WKUP_7 pin for input
     - code cleanup

commit ffa150bc90c943ca265170bd1be3f293674dd5c7
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Nov 1 01:45:46 2006 +0100

    - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
	  * remove warnings when compiling ethaddr.c
	  * adjust linker script (fixes a crash resulting from incorrect
	  definition of __u_boot_cmd_start)
    - Some MarelV38B code cleanup.

commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Nov 1 01:38:16 2006 +0100

    - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
      MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
      Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
      MPC5XXX_WU_GPIO_DATA_O for affected boards.

    - Add defintions for some MPC5XXX GPIO pins.

commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
Author: Bartlomiej Sieka <tur@semihalf.com>
Date:	Wed Nov 1 01:34:29 2006 +0100

    Changed MarelV38B board make target to lowercase. Config file cleanup.

commit 1954be6e9c9421b45d0a9d05b10356acc7563150
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sun Oct 29 01:03:51 2006 +0200

    Automatically adjust ARFLAGS so "make -s" is really silent.

commit fae684e89844856383bdf101440889557df3e6b1
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 28 16:45:00 2006 +0200

    [PATCH] omap925.c: Remove unused functions

    Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 28 17:12:58 2006 +0200

    [PATCH] Add some missing machtypes for netstar & voiceblue boards

    Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
    numbers in code.

    Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 856f054410cef52d868feb330168b2a4c4091328
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 28 15:55:52 2006 +0200

    [PATCH] NAND: Partition name support added to NAND subsystem

    chpart, nboot and NAND subsystem related commands now accept also partition
    name to specify offset.

    Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
    Signed-off-by: Stefan Roese <sr@denx.de>

commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sat Oct 28 02:29:44 2006 +0200

    Update CHANGELOG.

commit 2751a95abd1b96911081c357e96a12fa97b40dee
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sat Oct 28 02:29:14 2006 +0200

    Enable commandline editing and hush shell on all TQM boards.

commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sat Oct 28 02:28:02 2006 +0200

    README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE

commit 471a7be7a042e95e440f5de969c9765214ae8d6e
Author: Wolfgang Denk <wd@denx.de>
Date:	Sat Oct 28 01:14:32 2006 +0200

    Check for illegal character '=' in environment variable names.

    Make sure the string passed as variable name does not contain a '='
    character. This not only prevents the common error or typing
    "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
    also closes a backdoor which allowed to delete write-protected
    environment variables, for example by using "setenv ethaddr=".

commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Sat Oct 28 00:38:39 2006 +0200

    Minor code cleanup.

commit e11887a77d81077416a2d1c5e0354916fee8c034
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Thu Oct 26 17:55:31 2006 +0200

    Don't pass any debug options directly to the assembler

    When passing the -g option to gcc, gcc automatically selects a
    suitable --g<format> option to pass on to the assembler.
    Thus, there's no point in forcing a specific debug option on the
    assembler using the -Wa mechanism.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
Author: Jon Loeliger <jdl@freescale.com>
Date:	Fri Oct 27 07:47:22 2006 -0500

    MPC86xx: Cleaned up unused and conditionally used local variables.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Fri Oct 27 11:55:21 2006 +0200

    Fix "ar" flags in some Makefiles to allow for silent "make -s"

commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
Author: Ben Warren <bwarren@qstreams.com>
Date:	Thu Oct 26 14:38:25 2006 -0400

    Fix TSEC driver (now for real): avoid crashes if PHY is not attached
    to a TSEC (e.g. a switch is connected via RMII) or
    if the PHY is defective/incorrectly configured.

    Signed-off-by: Ben Warren <bwarren@qstreams.com>

commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
Author: Ben Warren <bwarren@qstreams.com>
Date:	Thu Oct 26 14:38:25 2006 -0400

    Fix TSEC driver: avoid crashes if PHY is not attached
    to a TSEC (e.g. a switch is connected via RMII) or
    if the PHY is defective/incorrectly configured.

    Signed-off-by: Ben Warren <bwarren@qstreams.com>

commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Thu Oct 26 16:24:31 2006 +0200

    Code cleanup.

commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date:	Wed Oct 25 15:48:59 2006 +0200

    Finish up support for the ATSTK1000/ATSTK1002 boards

    Add atstk1002_config target to Makefile and move the AVR32 section
    down below Blackfin so that it doesn't end up in the middle of
    MIPS.

    Drop the autogenerated linker script thing for now. Will have to
    revisit how to handle chips with different flash and RAM layout
    later.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
Author: Kumar Gala <galak@kernel.crashing.org>
Date:	Tue Oct 24 23:47:37 2006 -0500

    Added support for Multi-Image files that contain a device tree

    If a Multi-Image file contains a third image we try to use it as a
    device tree.  The device tree image is assumed to be uncompressed in the
    image file.  We automatically allocate space for the device tree in memory
    and provide an 8k pad to allow more than a reasonable amount of growth.

    Additionally, a device tree that was contained in flash will now automatically
    get copied to system memory as part of boot.  Previously an error was
    reported if one tried to boot a device tree that was in flash.

    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
Author: Wolfgang Denk <wd@denx.de>
Date:	Tue Oct 24 21:35:55 2006 +0200

    Switch to automatically generated CHANGELOG file.
    (use "make CHANGELOG" to update it from time to time)

commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
Author: Stefan Roese <sr@denx.de>
Date:	Tue Oct 24 18:06:48 2006 +0200

    Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
    Patch by Stefan Roese, 24 Oct 2006

commit 8ae3b713b2286e0c3213b7802062e4c1599010de
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 17:24:55 2006 +0200

    Merge with /home/wd/git/u-boot/master

commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 15:32:57 2006 +0200

    Code cleanup

commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 14:51:36 2006 +0200

    Move atstk1000 files into vendor specific directory.
    Patch by Haavard Skinnemoen, 12 Sep 2006

commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 14:42:37 2006 +0200

    Add ATSTK1000 and ATSTK1002 board support
    Patch by Haavard Skinnemoen, 06 Sep 2006

    This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
    daughterboard.

    ATSTK1000 is a full-featured development board for AT32AP CPUs. It
    has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
    and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
    CompactFlash cards. For more information, please see this page:

    http://www.atmel.com/dyn/products/tools.asp?family_id=682

    The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
    AT32AP7000 chip.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit f93ae788c3640fcde5db383471d45548ff4060d0
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 14:31:24 2006 +0200

    Add common serial driver for Atmel AT32 and AT91 chips
    Patch by Haavard Skinnemoen, 06 Sep 2006

    This is a first attempt at creating a common serial driver for Atmel
    chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
    be possible to support AT91RM9200 and other ARM-based chips with some
    minor modifications.

    There's nothing fundamentally AVR32-specific in this driver, but it
    does use some features which are currently only defined for the
    AT32AP CPU port:
      * pm_get_clock_freq: Obtain the clock frequency of a given domain
      * gd->console_uart: A "struct device" containing information about
	register mappings, gpio resources and clocks associated with the
	UART device.

    For more information about these features, please see the "AT32AP
    CPU" patch.

commit 72a087e04705c26cad982879ebd06b5281bf825a
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 14:27:35 2006 +0200

    Add AT32AP CPU and AT32AP7000 SoC support
    Patch by Haavard Skinnemoen, 06 Sep 2006

    This patch adds support for the AT32AP CPU family and the AT32AP7000
    chip, which is the first chip implementing the AVR32 architecture.

    The AT32AP CPU core is a high-performance implementation featuring a
    7-stage pipeline, separate instruction- and data caches, and a MMU.
    For more information, please see the "AVR32 AP Technical Reference":

    http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf

    In addition to this, the AT32AP7000 chip comes with a large set of
    integrated peripherals, many of which are shared with the AT91 series
    of ARM-based microcontrollers from Atmel. Full data sheet is
    available here:

    http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 7b64fef33c66be648826c0ff9758298ef13d0604
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 14:21:16 2006 +0200

    Add AVR32 architecture support
    Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200

    This patch adds common infrastructure code for the Atmel AVR32
    architecture. See doc/README.AVR32 for details.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

commit 2da2d9a4766063b9848f3a35ad6025499cf87265
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 13:57:33 2006 +0200

    Use -g instead of -gstabs in AFLAGS_DEBUG
    Patch by Haavard Skinnemoen, 30 Aug 2006

    In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
    matter what the target's preferred debugging format is. This patch
    simply replaces -gstabs with -g, so that the default debugging format
    for the architecture is used.

commit 965829872169c2996023840d98e1d85ad148d629
Author: Wolfgang Denk <wd@pollux.denx.de>
Date:	Tue Oct 24 13:55:18 2006 +0200

    Fix/workaround broken dependency handling with make 3.81
    Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200

commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
Author: Marian Balakowicz <m8@semihalf.com>
Date:	Mon Oct 23 22:17:05 2006 +0200

    Fix sequoia separate object direcory building problems.

commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
Author: Jon Loeliger <jdl@freescale.com>
Date:	Fri Oct 20 17:16:35 2006 -0500

    Use generic I2C register block on 85xx and 86xx.

    Replace private IMMAP I2C structures with generic reg block
    and allow 86xx to have multiple I2C device busses.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
Author: Jon Loeliger <jdl@freescale.com>
Date:	Fri Oct 20 15:54:34 2006 -0500

    Fix compilation warnings on a few 85xx boards.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
Author: Jon Loeliger <jdl@freescale.com>
Date:	Fri Oct 20 15:50:15 2006 -0500

    Converted all 85xx boards to use a common FSL I2C driver.
    Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
    And removed hard i2c path from a few u-boot.lds scipts too.
    Minor whitespace cleanups along the way.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 4d45f69e362b05892c9e92a7907e5820995612aa
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Oct 19 12:02:24 2006 -0500

    Rewrite a series of goto statements as a sequences of
    conditional expressions instead.

    Use consistent return code 0/-1 for good/bad indicators.

    Include one fewer file if the driver isn't used at all.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 7237c033b02fe295880435f1eb80819a0c987532
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Oct 19 11:02:16 2006 -0500

    Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c

    in an effort to begin to unify the umpteen FSL I2C drivers that
    are all otherwise very similar.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Oct 19 11:33:52 2006 -0500

    * Fix a bunch of compiler warnings for gcc 4.0

    Signed-off-by: Matthew McClintock <msm@freescale.com>

commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
Author: Stefan Roese <sr@denx.de>
Date:	Tue Oct 17 06:14:31 2006 +0200

    Add monitor functions for indirect access to PPC440 DCR's
    Patch by Leonid Baryudin, 12 Oct 2006

commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
Author: Jon Loeliger <jdl@freescale.com>
Date:	Fri Oct 13 16:47:53 2006 -0500

    Fixed leading whitespace issues.
    Removed spurious LAWAR thing.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Oct 12 10:42:36 2006 -0500

    Remove unneeded include files and local variable.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
Author: Grant Likely <grant.likely@secretlab.ca>
Date:	Tue Oct 10 00:23:32 2006 -0600

    Fix possible uninitialized variable compiler warning.

    When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
    do_bootm_linux() may be uninitialized.  There is no possibility in the
    current code that len will get used uninitialized, but this fix follows
    the existing convention of setting both len and data to zero at the same
    time.

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Oct 11 15:13:01 2006 -0500

    * Fix a bunch of compiler warnings for gcc 4.0

    Signed-off-by: Matthew McClintock <msm@freescale.com>

commit bf651baa365e5447246aad6a633ccd667cf24a39
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Oct 11 10:10:43 2006 -0500

    Move "ar" flags to config.mk to allow for silent "make -s"

commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Oct 10 17:19:03 2006 -0500

    Coding style changes to remove local varible blocks
    and reformat a bit nicer.

commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Oct 10 17:16:04 2006 -0500

    Fix whitespace issues.

commit 7b382b7125f2397cce63253df62f183e3dfa2770
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Oct 10 17:14:45 2006 -0500

    Fix whitespace issues.

commit e10390ddd736b0dad1528eec4b0fe35c0827139a
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Oct 10 17:06:53 2006 -0500

    Fix whitespace issues.

commit 89875e96ba3f023157bf50d5f8e33bf254964a76
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Oct 10 17:03:43 2006 -0500

    Ran lindent and cleaned up whitespace issues.
    Format for 80-columns too.

commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Oct 10 17:02:22 2006 -0500

    Fix whitespace and 80-col issues.

commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 7 11:36:51 2006 +0200

    CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
    Patch by Stefan Roese, 07 Oct 2006

commit 5bc528fa4da751d472397b308137238a6465afd2
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 7 11:35:25 2006 +0200

    Update ALPR code (NAND support working now)
    Patch by Stefan Roese, 07 Oct 2006

commit 77d5034847d328753b80c46b83f960a14a26f40e
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 7 11:33:03 2006 +0200

    Remove compile warnings in fpga code
    Patch by Stefan Roese, 07 Oct 2006

commit f3443867e90d2979a7dd1c65b0d537777e1f9850
Author: Stefan Roese <sr@denx.de>
Date:	Sat Oct 7 11:30:52 2006 +0200

    Add CONFIG_BOARD_RESET to configure board specific reset function
    Patch by Stefan Roese, 07 Oct 2006

commit f55df18187e7a45cb73fec4370d12135e6691ae1
Author: John Traill <john.traill@freescale.com>
Date:	Fri Sep 29 08:23:12 2006 +0100

    Fix missing tCycle/modfreq calculation.

    Signed-off-by: John Traill <john.traill@freescale.com>

commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Sep 13 10:33:35 2006 -0500

    Updated config headers to add default FDT-based booting

commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Sep 13 10:34:18 2006 -0500

    Add support for eTSEC 3 & 4 on 8548 CDS

    * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
      This will only work on rev 1.3 boards (but doesn't break older boards)
    * Cleaned up some comments to reflect the expanded role of tsec
      in other systems

commit 084d648b109c8984f83674043c1a7fa3885ef801
Author: Andy Fleming <afleming@freescale.com>
Date:	Wed Sep 13 10:33:56 2006 -0500

    Added code to support 2.6.18 PCI changes in u-boot

    * Added code to swizzle the IRQ map for the PCI

commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Sep 19 09:34:10 2006 -0500

    Modified makefile for new build mechanism.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit d14ba6a798beb753e7a864500414fcc2d198b8bc
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Sep 14 08:40:36 2006 -0500

    Handle 86xx SVR values according to the new Reference Manual.
    Both 8641 and 8641D have SVR == 0x8090, and are distinguished
    by the byte in bits 16-23 instead.
    Thanks to Jason Jin for noticing.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
Author: Zhang Wei <wei.zhang@freescale.com>
Date:	Mon Aug 28 14:25:31 2006 +0800

    Fixed an OF-tree off-by-one bug when adding a new property name.
    This bug will cause the kernel booting to pause a long time.

    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
    (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)

commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 29 11:05:09 2006 -0500

    Remove trailing empty lines.

commit cd6d73d5b895a5935ac4fde0a356288142a584e0
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 29 09:48:49 2006 -0500

    Remove bogus msync and use volatile asm.

commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 29 08:17:14 2006 -0500

    Add myself as maintainer for MPC8641HPCN.

commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
Author: Zhang Wei <wei.zhang@freescale.com>
Date:	Mon Aug 28 14:25:31 2006 +0800

    Fixed an OF-tree off-by-one bug when adding a new property name.
    This bug will cause the kernel booting to pause a long time.

    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>

commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Fri Aug 25 14:38:34 2006 -0400

    Change ramdiskaddr and dtbaddr
    Remove PEX fluff commands.

    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Aug 23 13:32:45 2006 -0500

    * Another small fix for booting with disable_of

    Signed-off-by: Matthew McClintock <msm@freescale.com>

commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Aug 23 11:04:43 2006 -0500

    Cleanup and lindent new AHCI driver.

commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
Date:	Wed Aug 23 19:15:12 2006 +0800

    Add AHCI define and sata support for MPC8641HPCN board.

    Signed-off-by:Jason Jin<jason.jin@freescale.com>

commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
Date:	Wed Aug 23 19:10:44 2006 +0800

    Add AHCI support to u-boot

    Add AHCI support in u-boot, enable the sata disk controllers which
    following the AHCI protocol.

    Signed-off-by:Jason Jin<jason.jin@freescale.com>

commit d8ea2acf5f137cae99417df4f573d036ee384668
Author: Zhang Wei <wei.zhang@freescale.com>
Date:	Wed Aug 23 17:54:32 2006 +0800

    Add dtb boot-up parameter to default boot commands.

    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>

commit b93775c2036b99baa390ea425c4771895bbc63c4
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 22 18:26:08 2006 -0500

    Cleanup even more poorly introduced whitespace.

commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 22 18:07:00 2006 -0500

    Cleanup more poorly introduced whitespace.

commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 22 17:54:05 2006 -0500

    Cleanup poorly introduced whitespace.

commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 22 12:25:27 2006 -0500

    General indent and whitespace cleanups.

commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 22 12:06:18 2006 -0500

    General indent and whitespace cleanups.

commit 41a0e8b304d3ff55fe27a230507aac79684016ac
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue Aug 22 10:42:21 2006 -0500

    Cleanup compiler warnings.

commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
Author: Matthew McClintock <msm@freescale.com>
Date:	Tue Aug 22 09:31:59 2006 -0500

    Fix disable_of booting

    Signed-off-by: Matthew McClintock <msm@freescale.com>

commit 87a449c8ac396420cb24260f717ea9e6faa82047
Author: Matthew McClintock <msm@freescale.com>
Date:	Tue Aug 22 09:23:55 2006 -0500

    Support for FDT in uImage format, error when using FDT from flash

    Signed-off-by: Matthew McClintock <msm@freescale.com>

commit 75c299c38369d01addd5e054b8a16217b70f4a86
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Tue Aug 15 15:12:55 2006 -0400

    Unlock cache before kernel starts up for MPC86xx

commit 67256678f00c09b0a7f19e862e5c1847553d31bc
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Tue Aug 15 15:13:15 2006 -0400

    Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR

commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Tue Aug 15 15:12:55 2006 -0400

    Unlock cache before kernel starts up for MPC86xx

commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Tue Aug 15 15:13:15 2006 -0400

    Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR

commit 86c8e17f25e972a7e272950a0735fad84e082b88
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Aug 16 13:59:47 2006 -0500

    * Fix disable_of booting

    Signed-off-by: Matthew McClintock <msm@freescale.com>

commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Aug 16 10:54:09 2006 -0500

    * Support for FDT in uImage format, error when using FDT from flash

    Signed-off-by: Matthew McClintock <msm@freescale.com>

commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
Author: Stefan Roese <sr@denx.de>
Date:	Tue Aug 15 14:22:35 2006 +0200

    Add initial support for the ALPR board from Prodrive
    NAND needs some additional testing
    Patch by Heiko Schocher, 15 Aug 2006

commit f0ff4692ff3372dec55074a8eb444943ab095abb
Author: Stefan Roese <sr@denx.de>
Date:	Tue Aug 15 14:15:51 2006 +0200

    Add FPGA Altera Cyclone 2 support
    Patch by Heiko Schocher, 15 Aug 2006

commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
Author: Jon Loeliger <jdl@freescale.com>
Date:	Mon Aug 14 15:33:38 2006 -0500

    Fix BAT0 to actually be cacheable, non-guarded as documented.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 40bc83559db5745681909fd7382ae509567e116d
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Aug 9 15:32:16 2006 -0500

    Removed MPC8641HPCN DTS source file from build.
    It is no longer linked into U-Boot; its sources are
    now located in the kernel tree.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:47:03 2006 -0500

    * Switched default PCI speed for 8540 ADS back to 33MHz

    * Added comments and a printf to warn that PCI-X won't
      work at 33MHz
      Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:46:35 2006 -0500

    * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:46:13 2006 -0500

    * Added VIA configuration table

    * Added support for PCI2 on CDS
      Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit c88f9fe66b64247e5b6a38410ba315ca25596d16
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:45:41 2006 -0500

    * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 97074ed9655309b64231bc2cee69fe85399f8055
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:45:17 2006 -0500

    * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:44:49 2006 -0500

    * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit a4e11558b810ef2cddffdf7b9d86bc1130441960
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:44:23 2006 -0500

    * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:43:36 2006 -0500

    * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:43:00 2006 -0500

    * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006

commit 5498d90312aad9f6bdbf047986027c35b03cd163
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:42:24 2006 -0500

    * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006

commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:41:37 2006 -0500

    * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006

commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
Author: John Traill <john.traill@freescale.com>
Date:	Wed Aug 9 14:33:50 2006 +0100

    Add Rapidio support for the MPC8641HPCN

    Signed-off-by: John Traill <john.traill@freescale.com>

commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
Author: John Traill <john.traill@freescale.com>
Date:	Tue Aug 8 11:32:43 2006 +0100

    Fix caslat calculation

    Signed-off-by: John Traill <john.traill@freescale.com>

commit 709d3073e74153278e7904a70819bbef7df50e1a
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Aug 3 16:17:56 2006 -0500

    Convert to mac-address in ethernet nodes.

commit 71748af833ca1017edf1415be376366ff2937d17
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Fri Jul 28 12:41:35 2006 -0400

    Correct the irq value of DUART2

commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Fri Jul 28 12:41:41 2006 -0400

    Change the space size of PEX IO in README

commit 239db37c94f7a92941c4465feceb867c609241c5
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Fri Jul 28 12:41:18 2006 -0400

    Move get_board_sys_clk to board directory

commit 492900b985439fbce1a118afde1e35def870db03
Author: John Traill <john.traill@freescale.com>
Date:	Fri Jul 28 09:03:54 2006 +0100

    Fix 8641HPCN pollution

commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
Author: John Traill <john.traill@freescale.com>
Date:	Fri Jul 28 08:16:06 2006 +0100

    Fix 8641HPCN timebase

commit c86360b830f1eecd7a72208575dde4f57879faea
Author: Zhang Wei <wei.zhang@freescale.com>
Date:	Fri Jul 28 00:01:34 2006 +0800

    Fixed OF device tree of mpc86xxhpcn board.

    The changes works in with kernel irq mapping rework.

    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>

commit bea3f28d285942bf3f7ab339ce85178ded544225
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Wed Jul 12 10:48:05 2006 -0400

    Add support for reading and writing mac addresses to or from ID EEPROM.

    Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
    With attached patch, we can use command "mac/mac read/mac save/"
    to read and write EEPROM under u-boot prompt.

    U-boot will calculate the checksum of EEPROM while bootup,
    if it is right, then u-boot will check whether the mac address
    of eTSEC0/1/2/3 is availalbe (non-zero).

    If there is mac address availabe in EEPROM, u-boot will use it,
    otherewise, u-boot will use the mac address defined in
    MPC8641HPCN.h. This matches the requirement to set unique mac address
    for each TSEC port.

    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
    Signed-off-by: York Sun <yorksun@freescale.com>

commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
Author: Jin Zhengxiong <Jason.Jin@freescale.com>
Date:	Thu Jul 13 10:35:10 2006 -0500

    Fixed initrd issue by define big RAM

    Signed-off-by:Jason Jin <Jason.jin@freescale.com>

commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
Author: Jason Jin <Jason.jin@freescale.com>
Date:	Fri Jul 7 10:01:45 2006 -0500

    We made a u-boot patch to fix the hang up issue
    when booting filesystem from ramdisk.

    Signed-off-by:Jason Jin <Jason.jin@freescale.com>

commit 38433ccc5850ee70549af0b2bc5b920355ef5388
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:47:03 2006 -0500

    * Switched default PCI speed for 8540 ADS back to 33MHz
    * Added comments and a printf to warn that PCI-X won't
      work at 33MHz
      Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:46:35 2006 -0500

    * Fixed a bug where 8555 PCI code used the old variable and
      function names
      Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:46:13 2006 -0500

    * Added VIA configuration table
    * Added support for PCI2 on CDS
      Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:45:41 2006 -0500

    * Fixed PCI memory definitions
      Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 087454609e47295443af793a282cddcd91a5f49c
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:45:17 2006 -0500

    * Added support for initializing second PCI bus on 85xx
      Patch by Andy Fleming 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:44:49 2006 -0500

    * Added PCI-X #defines for PCI-X initialization
      Patch by Andy Fleming on 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:44:23 2006 -0500

    * Made sure the code which disables prefetch for PCI devices
      sets the size of the prefetch region to 0
      Patch by Andy Fleming on 17-Mar-2006

    Signed-off-by: Andy Fleming <afleming@freescale.com>

commit 40d5fa35d02df22580593bf0039ab173367e8ef0
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:43:36 2006 -0500

    * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
      Patch by Jon Loeliger 17-Jan-2006

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit be7e8b0cb5a0c49dc180075b96df296a893bf146
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:43:00 2006 -0500

    * Removed the oftree.dts for stxxtx in light of the changes
      to the flat device tree handling code
      Patch by Matthew McClintock 26-June-2006

commit 1b380ec225665e73959677f3893dc658c5925e05
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:42:24 2006 -0500

    * Patch to modify ft_build.c to update flat device trees in place
      Patch by Matthew McClintock 26-June-2006

commit 98a9c4d468a942a09ebe8979bec508017f3e4462
Author: Matthew McClintock <msm@freescale.com>
Date:	Wed Jun 28 10:41:37 2006 -0500

    * Modify bootm command to support booting with flat device trees
      Patch by Matthew McClintock 26-June-2006

commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
Author: Jin Zhengxiong <Jason.Jin@freescale.com>
Date:	Wed Jun 28 08:43:56 2006 -0500

    Change Id to symbolic name for RTL8139

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>

commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Date:	Tue Jun 27 18:12:10 2006 +0800

    Fix RTL8139 in big endian

    signed-off-by: Jason Jin <Jason.Jin@freescale.com>
    signed-off-by: Wei Zhang <wei.zhang@freescale.com>

commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Date:	Tue Jun 27 18:12:23 2006 +0800

    Fix Tsec bug when no link

     When tftp a non-exist file from the tftp server, u-boot will check
     the link of all eth port. The original file will return wrong link
     state on the no link ports.

    signed-off-by: Jason Jin <Jason.Jin@freescale.com>

commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Date:	Tue Jun 27 18:12:02 2006 +0800

    Fix bug for io_bar size during pci scan

    During the pci scan process, Some devices return bar_reponse with the
    highest bytes 0, such as the pci bridge in uli1575 return bar_response
    with 0xffffff, So the bar_size should be manually set under 64K.

    Signed-off-by: Jason Jin <jason.jin@freescale.com>

commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Date:	Tue Jun 27 18:11:54 2006 +0800

    Enable PCIE1 for MPC8641HPCN board

    Signed-off-by: Jason Jin <Jason.jin@freescale.com>

commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Jun 22 08:51:46 2006 -0500

    Fix bug in 8641hpcn reset command with no args.

    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
    Acked-by: Jon Loeliger <jdl@freescale.com>

commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
Author: Zhang Wei <wei.zhang@freescale.com>
Date:	Tue Jun 20 17:47:15 2006 +0800

    Reworked IRQ mapping in OF-tree.

commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Jun 15 21:33:37 2006 -0500

    Do not enable address translation on secondary CPUs.
    Do not set up BATs on secondary CPUs.  Let Linux do the nasty.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 8ecc971618f56029ad99d3516f8b297a6ed58971
Author: Jon Loeliger <jdl@jdl.com>
Date:	Wed Jun 7 10:53:55 2006 -0500

    Fix a get_board_sys_clk() use-before-def warning.

    Signed-off-by: Jon Loeliger <jdl@jdl.com>

commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
Author: Jon Loeliger <jdl@jdl.com>
Date:	Wed Jun 7 10:52:49 2006 -0500

    Allow DTC path to be passed in.

    Signed-off-by: Jon Loeliger <jdl@jdl.com>

commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
Author: Haiying Wang <haiying.wang@freescale.com>
Date:	Tue Jun 6 16:54:29 2006 -0400

    Modify the IRQ of DUART2

commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
Author: Jon Loeliger <jdl@jdl.com>
Date:	Wed May 31 13:55:35 2006 -0500

    Review cleanups.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
Author: Jon Loeliger <jdl@jdl.com>
Date:	Wed May 31 12:44:44 2006 -0500

    White space cleanup.
    Some 80-column cleanups.
    Convert printf() to puts() where possible.
    Use #include "spd_sdram.h" as needed.
    Enhanced reset command usage message a bit.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
Author: Jon Loeliger <jdl@jdl.com>
Date:	Wed May 31 11:39:34 2006 -0500

    Removed unneeded local_bus_init() from 8641HPCN board.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 4d3d729c16c392d2982d3266b659d333c927697d
Author: Jon Loeliger <jdl@jdl.com>
Date:	Wed May 31 11:24:28 2006 -0500

    Moved mpc8641hpcn_board_reset() out of cpu/ into board/.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit b2a941de060350ad15878d8219825f4950e9bb8e
Author: Jon Loeliger <jdl@jdl.com>
Date:	Wed May 31 10:07:28 2006 -0500

    Remove dead debug code.

    Signed-off-by: Jon Loeliger <jdl@jdl.com>

commit 126aa70f10ba3d20e0a6f4d32328250513b77770
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue May 30 17:47:00 2006 -0500

    Move mpc86xx PIXIS code to board directory

    First cut at moving the PIXIS platform code out of
    the 86xx cpu directory and into board/mpc8641hpcn
    where it belongs.

    Signed-off-by: Jon Loeliger <jdl@freescale.com>

commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Tue May 30 09:10:32 2006 -0500

    Improve "reset" command's interaction with watchdog.

	"reset altbank" will reset another bank WITHOUT watch dog timer enabled
	"reset altbank wd" will reset another bank WITH watch dog enabled
	"diswd" will disable watch dog after u-boot boots up successfully

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Tue May 30 08:51:19 2006 -0500

    Fix two SDRAM setup bugs.

	Fix ECC setup bug.
	Enable 1T/2T based on number of DIMMs present.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit d11fec5015334deb2010e36ce00bb118cc5429a5
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri May 26 10:24:48 2006 -0500

    Add first draft of the MPC8641HPCN doc/README.

    Signed-off-by: Jon Loeliger <jdl@jdl.com>

commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri May 26 10:13:04 2006 -0500

    Added pci@8000 block.
    Updated ethernet interrupt mappings (moved up 48).
    Cleaned up a few comments.

    Signed-off-by: Jon Loeliger <jdl@jdl.com>

commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Fri May 26 10:01:16 2006 -0500

    Allow args on reset command.

    Signed-off-by: Jon Loeliger <jdl@jdl.com>

commit 14e37081ff3cac7ebe6e93836523429853b6b292
Author: Jon Loeliger <jdl@jdl.com>
Date:	Fri May 19 13:28:39 2006 -0500

    Change arbitration to round-robin for SMP linux.

commit 9a655876e5995be80f49054e2509500e871e4d3a
Author: Jon Loeliger <jdl@jdl.com>
Date:	Fri May 19 13:26:34 2006 -0500

    Enable dual DDR controllers and interleaving.

commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
Author: Jon Loeliger <jdl@jdl.com>
Date:	Fri May 19 13:22:44 2006 -0500

    Update 86xx address map and LAWBARs.

commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
Author: Jon Loeliger <jdl@jdl.com>
Date:	Fri May 19 13:14:15 2006 -0500

    Remove L2 Cache invalidate polling.

commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
Author: Jon Loeliger <jdl@jdl.com>
Date:	Fri May 19 12:33:09 2006 -0500

    Enable 2nd CPU and I2C.

commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
Author: Jon Loeliger <jdl@freescale.com>
Date:	Mon May 15 07:26:56 2006 -0500

    Update interrupt mapping.

commit 6cfea33477b04b63ed47386ed1629529484c33ba
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date:	Wed May 10 09:38:06 2006 -0500

    Remove unneeded INIT_RAM_LOCK cache twiddling.
    Correctly tracks r29 as global data pointer now.

    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed May 10 09:33:07 2006 -0500

    Remove unnecessary flash.c file.

commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
Author: Jon Loeliger <jdl@freescale.com>
Date:	Tue May 9 08:23:49 2006 -0500

    Get MPC8641HPCN flash images working.

	Enable the CFI driver.
	Remove bogus LAWBAR7 cruft.
	Use correct TEXT_BASE, Fixup load script.
	Enable SPD EEPROM during DDR setup.
	Use generic RFC 1918 IP addresses by default.

commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Apr 27 10:15:16 2006 -0500

    Cleanup whitespaces and style issues.
    Removed //-style comments.
    Use 80-column lines.
    Remove trailing whitespace.
    Remove dead code and debug cruft.

commit a2320a6bf8113a09544c42d160d10ac69d049a03
Author: Jon Loeliger <jdl@freescale.com>
Date:	Thu Apr 27 08:22:39 2006 -0500

    Revert bad PCI prefetch limit change.

commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
Author: Jon Loeliger <jdl@freescale.com>
Date:	Wed Apr 26 17:58:56 2006 -0500

    Initial support for MPC8641 HPCN board.