blob: 82be4e3d7791430575d6f89799fcbccb9ce962f7 [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
Wolfgang Denk27e166b2005-12-19 13:02:45 +01002Changes since U-Boot 1.1.4:
3======================================================================
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02004
Marian Balakowicz6d3bc9b2006-08-18 19:14:46 +02005* Add support for WTK FO300 board (TQM5200 based).
6
Rafal Jaworowski6fe16a82006-08-18 10:39:11 +02007* Fix TQM834x hang.
8
Wolfgang Denk94568b62006-08-14 23:23:06 +02009* Update for SC520 board.
10 Patch by David Updegraff, 02 Dec 2005
11
Wolfgang Denk2f6fa462006-08-14 23:17:47 +020012* Fixed common.h spelling error.
13 Patch by Cory Tusar, 30 Nov 2005
14
Wolfgang Denkddd5d9d2006-08-14 22:43:13 +020015* Fix typo.
16 Patch by Andreas Engel, 28 Nov 2005
17
Wolfgang Denk80f0c0f2006-08-14 22:05:26 +020018* Fix fatload command on FAT32 formatted partitions.
19 Patch by Joachim Jaeger, 18 Nov 2005
20
Wolfgang Denkd689e342006-08-14 21:18:21 +020021* Fix drivers/dm9000.c when configured in 32 bit mode.
22 Patch by Eric Benard, 17 Nov 2005
23
Wolfgang Denk0a0f3a42006-08-17 10:48:36 +020024* Cleanup debug code for yucca board.
25
Wolfgang Denk6183bb92006-08-17 00:50:26 +020026* MCC200: restrict addressable flash space to 32 MB
27
Wolfgang Denk463764c2006-08-17 00:36:51 +020028* Add debug console on COM12 for MCC200 board
29
Stefan Roesed8f961b2006-08-07 15:08:44 +020030* Fix control-c handing in CONFIG_CMDLINE_EDITING
31 Properly pass break code back from readline.
32 Patch by Roger Blofeld, 31 Jul 2006
33
Stefan Roese4f92ed52006-08-07 14:33:32 +020034* Add commandline history support to all AMCC eval boards
35 Patch by Stefan Roese, 07 Aug 2006
36
Stefan Roese9ede3cc2006-08-07 14:31:21 +020037* Add Macronix MXLV320T flash support for AMCC Bamboo
38 Patch by Stefan Roese, 07 Aug 2006
39
Stefan Roesee335496a2006-08-07 14:29:04 +020040* Change "mii info" to not print an error upon missing PHY at address
41 Patch by Stefan Roese, 07 Aug 2006
42
Rafal Jaworowski36b904a2006-08-11 12:35:52 +020043* Fix PCI-Express on PPC440SPe rev. A.
44
Wolfgang Denkd8519dc2006-08-11 17:33:42 +020045* Fix preboot message on TQM85xx after switching to hush parser.
46
Wolfgang Denk015c2002006-08-11 17:29:38 +020047* Adapt TQM85xx ramdisk address to Linux kernel memory map
48
Rafal Jaworowski692519b2006-08-10 12:43:17 +020049* Add initial support for PCI-Express on PPC440SPe (Yucca board).
50
Wolfgang Denka3d91812006-08-10 01:58:22 +020051* Fix compiler warning for TRAB board.
52 Patch by Martin Krause, 07 Aug 2006
53
Bartlomiej Siekae51aae32006-08-03 23:20:13 +020054* Prevent USB commands from working when USB is stopped.
55
Bartlomiej Sieka7455af42006-08-02 00:54:18 +020056* Add rudimentary handling of alternate settings of USB interfaces.
Wolfgang Denk6587f7e2006-08-07 20:28:05 +020057 This is in order to fix issues with some USB sticks timing out
58 during initialization. Some code readability improvements.
59
Stefan Roesea2c95a72006-07-28 18:34:58 +020060* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
61 AMCC suggested to set the PMU bit to 0 for best performace on
62 the PPC440 DDR controller.
63 Please see doc/README.440-DDR-performance for details.
64 Patch by Stefan Roese, 28 Jul 2006
65
Stefan Roese193dd952006-07-27 16:14:05 +020066* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
67 Please see doc/README.bamboo for details.
68 Patch by Stefan Roese, 27 Jul 2006
69
Stefan Roese3ca91222006-07-27 16:11:19 +020070* Fix CONFIG_CMDLINE_EDITING implementation
71 Patch by Stefan Roese, 27 Jul 2006
72
Wolfgang Denk4c4aca82006-07-26 10:33:37 +020073* Fix preboot message on TQM5200 after switching to hush parser.
74
Wolfgang Denk4819fad2006-07-23 22:40:51 +020075* MCC200: set default configuration to low_boot DDR,
Stefan Roese3ca91222006-07-27 16:11:19 +020076 and support for configurable options high_boot and/or SDRAM.
Wolfgang Denk4819fad2006-07-23 22:40:51 +020077
Wolfgang Denkfd279962006-07-22 21:45:49 +020078* Add support for 256 MB SDRAM on CPU87
79 Patch by Josef Wagner, 25 Nov 2005
80
Wolfgang Denk135ae002006-07-22 01:20:03 +020081* Add configuration for cam5200 board (based on TQM5200S).
82
Wolfgang Denk966083e2006-07-21 15:24:56 +020083* More code cleanup
84
Wolfgang Denk144f7792006-07-21 15:21:40 +020085* Disabled kvme080 board in MAKEALL because of build problems.
86
Wolfgang Denkb9365a22006-07-21 11:56:05 +020087* Code cleanup
88
Wolfgang Denk87a5c732006-07-21 11:38:33 +020089* Update NetStar board
90 Patch by Ladislav Michl, 03 Nov 2005
91
Wolfgang Denk029b6dc2006-07-21 11:37:40 +020092* Make code better readable.
93 Patch by Ladislav Michl, 14 Sep 2005
94
Wolfgang Denk2c33a382006-07-21 11:36:48 +020095* Enable initrd ATAG for xm250 board.
96 Patch by Josef Wagner, 05 Sep 2005
Wolfgang Denkb9365a22006-07-21 11:56:05 +020097
Wolfgang Denk501090a2006-07-21 11:33:45 +020098* Add readline cmdline-editing extension
99 Patch by JinHua Luo, 01 Sep 2005
Wolfgang Denkb9365a22006-07-21 11:56:05 +0200100
Wolfgang Denk32cb2c72006-07-21 11:31:42 +0200101* Add support for friendly-arm SBC-2410X board
102 Patch by JinHua Luo, 01 Sep 2005
Wolfgang Denkb9365a22006-07-21 11:56:05 +0200103
Wolfgang Denke6446702006-07-21 11:30:18 +0200104* Fix multi-part image support on i386 platform.
105 Patch by David Updegraff, 19 Aug 2005
106
Wolfgang Denk53dd6ce2006-07-21 11:29:20 +0200107* Add support for KVME080 board
108 Patch by Sangmoon Kim, 18 Aug 2005
109
Wolfgang Denk0352f172006-07-21 11:24:47 +0200110* Fix MIPS LE build problem
Wolfgang Denk8623c112006-07-21 11:27:42 +0200111 Patch by Matej Kupljen, 10 Aug 2005
Wolfgang Denk0352f172006-07-21 11:24:47 +0200112
Wolfgang Denk311d8022006-07-21 11:20:46 +0200113* Check argument count in "mii" command.
114 Problem pointed out by Andrew Dyer, 13 Jun 2005
115
Wolfgang Denk5078cce2006-07-21 11:16:34 +0200116* Cleanup TQM5200 board configurations:
117 - make highboot configurations use environment at high end, too,
118 to avoid flash fragmentation
119 - always use redundand environment
120 - don't enable video code for modules without graphics controller
121 - provide useful (though different) mtdparts settings
122 - get rid of CONFIG_CS_AUTOCONF which was always set anyway
123
124* Extend mkconfig tool to print more useful target name
125
Wolfgang Denk978b1092006-07-19 18:01:38 +0200126* Add support for high-boot on TQM5200 and TQM5200S boards.
127 Hint: the CPLD on the TQM5200 must be programmed with a software
128 version supporting the high boot option! The new TQM5200S is
129 already supporting this option. On the TQM5200 this option will be
130 supported in configurations with MPC5200 rev B processors.
131 To actually "high boot", set jumper X30 on the STK52xx.
132 Patch by Martin Krause, 12 Jul 2006
133
Wolfgang Denk45a212c2006-07-19 17:52:30 +0200134* Add support for new TQM5200 revisions
135 - Support for TQM5200S (short version without graphic controller)
136 - Support for modules with 'N' type S29GL128N Spansion flashes
137 (requires changes to flash layout)
138 - Support for MPC5200B cpu (mostly support for second SDRAM bank)
Wolfgang Denk978b1092006-07-19 18:01:38 +0200139 Patch by Martin Krause, 07 Jul 2006
Wolfgang Denk45a212c2006-07-19 17:52:30 +0200140
Wolfgang Denkbd3143f2006-07-19 14:49:35 +0200141* Fix support for PS/2 keyboard on TQM85xx boards
142 The PS/2 keyobard driver for the TQM85xx modules only supports the
143 internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
144 include a DUART, the TQM8560 modules can't be used with the PS/2
145 keyboard controller on the STK85xx board.
146 The PS/2 keyboard driver should work with the modules TQM8540,
147 TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
148 Make sure the PS/2 controller on the STK85xx is programmed. Jumper
149 settings: X66 1-2, 9-10; X61 2-3
150 Patch by Martin Krause, 21 Jun 2006
151
Wolfgang Denkedd0b502006-07-19 14:44:03 +0200152* Adjust RTC century handling on STK52xx board to match Linux driver.
153 Patch by Martin Krause, 12 Jun 2006
154
Wolfgang Denkc786f422006-07-19 14:40:43 +0200155* Adjust filenames for USB update images on TRAB board.
156 During an automatic update via USB stick, U-Boot searches for
157 images with the name "firmware.img" and "kernel.img". This names
158 are now changed to "firmw_01.img" and "kernl_01.img". This is done,
159 to prevent updates of new boards (with the new macronics "c" step
160 flashes) with old, incompatible firmware or kernel versions.
161 Patch by Martin Krause, 21 Jun 2006
162
Wolfgang Denkd053ce62006-07-19 14:23:12 +0200163* Bugfix in VFD routine on TRAB board.
164 Make sure upper lext pixel can be set to blue, too
165 (so far only red was possible).
166 Patch by Martin Krause, 15 Feb 2006
167
Wolfgang Denk89366012006-07-19 14:16:38 +0200168* Enable buffered flash writes for TB5200 board.
169
Wolfgang Denk5a3dfef2006-07-19 14:13:02 +0200170* Fix some bugs in TRAB board flash driver.
171 - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
172 - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
173 - remove "Unlock Bypass" mode, because macronix flashes do not support
174 this mode officially
175 - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
176 for Intel compatible flashes, not for AMD compatible.
177 Patch by Martin Krause, 15 Feb 2006
178
Wolfgang Denk0de7fa52006-07-19 14:07:21 +0200179* Add additional error messages to flash driver on TRAB board
180 (for erase errors and timeout errors)
181 Patch by Martin Krause, 14 Feb 2006
182
Wolfgang Denkb87dfd22006-07-19 13:50:38 +0200183* Add support for TB5200 board
184 The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
185 integrated in a little aluminium case.
186 Patch by Martin Krause, 8 Jun 2006
187
Wolfgang Denkf3e06df2006-07-18 17:44:19 +0200188* Enable buffered flash writes for TQM5200 board.
189
Bartlomiej Siekaf88a0ae2006-07-13 15:32:16 +0200190* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
191
Wolfgang Denkdbba3992006-07-13 22:32:45 +0200192* Add support for TQM885D board.
193 Patch by Martin Krause, 20 Mar 2006
194
195* Fix FEC initialisation: All MII configuration is done via FEC1
196 registers, but MII_SPEED was configured according to FEC used. So
197 if only FEC2 was used, this caused the real MII_SPEED register in
198 FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages.
199 Fix: always configure MII_SPEED on FEC1 only.
200 Patch by Markus Klotzbuecher, 12 Jul 2006
201
202* Add support for SPC1920 board.
203 Patch by Markus Klotzbuecher, 12 Jul 2006
Wolfgang Denkb87dfd22006-07-19 13:50:38 +0200204
Wolfgang Denk87791f32006-07-11 00:23:54 +0200205* MCC200 board: support console on any one of the Quad UART ports.
206
Wolfgang Denk985b9502006-07-10 23:22:43 +0200207* Fix error in flash protection calculation on MCC200 board.
208
Wolfgang Denk9d407992006-07-10 23:07:28 +0200209* Major PCMCIA Cleanup to make code better readable and maintainable.
210 Notes:
211 - Board-dependend code for RPXLITE and RPXCLASSIC-based boards
212 placed to the drivers/rpx_pmcia.c file to avoid duplication.
213 Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
214 - drivers/i82365.c has been split into two parts located at
215 board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
216 the only boards using CONFIG_82365).
217 - Changes were tested for clean build and *very* *few* boards.
218
Marian Balakowiczedd6cf22006-07-06 21:17:24 +0200219* Fix timer problems on AMCC yucca board.
220 Set Timer Clock Select to use CPU clock as a timer input source.
221
Wolfgang Denkcaaeaf92006-07-05 10:42:14 +0200222* Bring yucca config more in line with other AMCC boards.
223
Marian Balakowiczce05de22006-07-04 08:47:23 +0200224* Add AMCC bamboo board to MAKEALL build script.
225
Marian Balakowiczd19206b2006-07-04 01:27:46 +0200226* Fix AMCC bamboo eval board compilation errors.
227
Marian Balakowiczfbb0b552006-07-04 00:55:47 +0200228* Add system memory to the PCI region list for AMCC PPC44x CPUs.
229 Enabled it for Yucca board.
230
Marian Balakowiczfe84b482006-07-03 23:42:36 +0200231* Cleanup config file and bootup output for Yucca board.
232
Marian Balakowiczbba68372006-06-30 18:35:04 +0200233* Fix CONFIG_440_GX define usage.
234
Marian Balakowicz971a5dd2006-06-30 18:23:06 +0200235* Remove autogenerated bmp_logo.h file.
236
Wolfgang Denk3f7a63e2006-06-30 20:16:37 +0200237* Add support for AMCC 440SPe CPU based eval board (Yucca).
238
239* Call serial_initialize() before first debug() is used.
240
Wolfgang Denka63c31c2006-06-26 10:54:52 +0200241* Cleanup trab board for GCC-4.x
242
Heiko Schochercb0fdf32006-05-03 08:34:03 +0200243* VoiceBlue update: use new MTD flash partitioning methods, use more
244 reasonable TEXT_BASE, update default environment and enable keyed
245 autoboot.
Wolfgang Denkb87dfd22006-07-19 13:50:38 +0200246 Patch by Ladislav Michl, 16. Aug 2005
Heiko Schochercb0fdf32006-05-03 08:34:03 +0200247
Heiko Schocher5720df72006-05-02 07:51:46 +0200248* Add forgotten changes for the PLEB 2 Board.
Wolfgang Denkf73e73b2006-06-20 00:12:59 +0200249 Patch by David Snowdon, 13. Aug 2005
250
Heiko Schocherf5e0d032006-06-19 11:02:41 +0200251* Add support for wrPPMC7xx/74xx boards
Wolfgang Denkf73e73b2006-06-20 00:12:59 +0200252 Patch by Richard Danter, 12 Aug 2005
Wolfgang Denkb87dfd22006-07-19 13:50:38 +0200253
Wolfgang Denk0c32d962006-06-16 17:32:31 +0200254* Add support for gth2 board
255 Patch by Thomas Lange, Aug 11 2005
256
Wolfgang Denkc12cffc2006-06-16 17:04:45 +0200257* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
258 Patch by Martin Krause, 8 Jun 2006
259
260 This patch supports two serial consoles on boards with
261 a MPC5xxx CPU. The console can be switched at runtime
262 by setting stdin, stdout and stderr to the desired serial
263 interface (serial0 or serial1). The PSCs to be used as
264 console port are definded by CONFIG_PSC_CONSOLE
265 and CONFIG_PSC_CONSOLE2.
266 See README.serial_multi for details.
267
Wolfgang Denk30a43cc2006-06-16 16:57:18 +0200268* Bugfix in I2C initialisation on S3C2400.
269 If the bus is blocked because of a previously interrupted
270 transfer, up to eleven clocks are generated on the I2CSCL
271 line to complete the transfer and to free the bus.
272 With this fix pin I2CSCL (PG6) is really configured as GPIO
273 so the clock pulses are really generated.
274 Patch by Martin Krause, 04 Apr 2006
Wolfgang Denkb87dfd22006-07-19 13:50:38 +0200275
Wolfgang Denk10af6d52006-06-16 16:53:06 +0200276* Fix DDR6 errata on TQM834x boards
277 Patch by Thomas Waehner, 07 Mar 2006
278
Wolfgang Denk14d9ab32006-06-16 16:50:42 +0200279* Remove obsolete flash driver board/tqm5200/flash.c
280 Patch by Martin Krause, 11 Jan 2006
281
Wolfgang Denk1ac7e172006-06-16 16:43:33 +0200282* Update configuration for CMC-PU2 board
283 Patch by Martin Krause, 17 Nov 2005
284
Wolfgang Denkbc8bb6d2006-06-16 16:40:54 +0200285* Add support for PS/2 keyboard on TQM85xx board
286 Patch by Martin Krause, 07 Nov 2005
287
288 Tested on a STK85XX baseboard. Make sure the PS/2 controller
289 has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
290
Wolfgang Denkcebd1fc2006-06-16 16:14:28 +0200291* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
Wolfgang Denkb87dfd22006-07-19 13:50:38 +0200292 In tsc2000_read_channel() the delay after setting the multiplexer
Wolfgang Denkcebd1fc2006-06-16 16:14:28 +0200293 to a temperature channel is increased from 1,5 ms to 10 ms. This
294 is to allow the multiplexer inputs to stabilize after huge steps
295 of the input signal level.
296 Patch by Martin Krause, 08 Nov 2005
297
Wolfgang Denkcd65a3d2006-06-16 16:11:34 +0200298* Adjust TQM5200 make targets
299 Make the automatic CS configuration the default.
300 The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
301 and CONFIG_TQM5200_AC are removed.
302 "TQM5200_config" is now the default for STK52XX.200 base boards.
303 On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
304 Patch by Martin Krause, 07 Nov 2005
305
Wolfgang Denk4bdb53c2006-06-16 15:56:12 +0200306* Fix setting of environment variable "ver" on trab board
307 The environment variable "ver" is now set before
308 do_auto_update() is called, so that "ver" can be used
309 in USB update scripts.
310 Patch by Martin Krause, 27 Oct 2005
311
Wolfgang Denkb9fff8e2006-06-16 15:52:58 +0200312* Fix wrong usage of udelay() in led_blink() on trab board
313 Patch by Martin Krause, 27 Oct 2005
314
Wolfgang Denk3e9a2992006-06-16 15:47:05 +0200315* Fix udelay bug in vfd.c for trab board
316 Patch by Martin Krause, 27 Oct 2005
317
Wolfgang Denke00f41e2006-06-16 15:45:03 +0200318* Disable JFFS2 support for trab board
319 Patch by Martin Krause, 27 Oct 2005
320
Wolfgang Denk33322402006-06-16 15:40:48 +0200321* Change mtdparts definition on trab board to match current flash map
322 Patch by Martin Krause, 27 Oct 2005
323
Wolfgang Denk9e18a4b2006-06-14 16:48:18 +0200324* Fix memory init problems on MCC200 board
325
Stefan Roesedf02bd12006-06-14 10:18:39 +0200326* Fix IxEthDB.h to compile again
327 Patch by Stefan Roese, 14 Jun 2006
328
Stefan Roeseed4633c2006-06-13 18:55:07 +0200329* Minor cleanup for PCS440EP board
330 Patch by Stefan Roese, 13 Jun 2006
331
Heiko Schocher9acb6262006-04-20 08:42:42 +0200332* Add MCF5282 support (without preloader)
333 relocate ichache_State to ram
334 u-boot can run from internal flash
335 Add EB+MCF-EV123 board support.
336 Add m68k Boards to MAKEALL
337 Patch from Jens Scharsig, 08 Aug 2005
338
Scott McNutt9cc83372006-06-08 13:37:39 -0400339* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
340 Patch by Scott McNutt, 08 Jun 2006
341
Scott McNutt1f6ce8f2006-06-08 12:08:12 -0400342* Nios II - Add EPCS Controller bootrom work-around
343 -When booting from an epcs controller, the epcs bootrom may leave the
344 slave select in an asserted state causing soft reset hang. This
345 patch ensures slave select is negated at reset.
346 Patch by Scott McNutt, 08 Jun 2006
347
Scott McNutt3d22d0b2006-06-08 12:03:21 -0400348* Update PK1C20 board
349 -Update base addresses for standard configuration
350 -Eliminate use of CACHE_BYPASS in board code
351 Patch by Scott McNutt, 08 Jun 2006
352
Scott McNuttc2ced002006-06-08 11:59:57 -0400353* Nios II - Fix I/O Macros and mini-app stubs
354 -Fix asm/io.h macros
355 -Eliminate use of CACHE_BYPASS in cpu code
356 -Eliminate assembler warnings
357 -Fix mini-app stubs and force no small data
358 Patch by Scott McNutt, 08 Jun 2006
359
Wolfgang Denk9d4d3e32006-06-10 01:36:27 +0200360* Fix U-Boot environment sector protection on MCC200 board
Wolfgang Denk5d7022b2006-06-09 21:19:21 +0200361
Wolfgang Denke461a242006-06-07 11:36:02 +0200362* Minor cleanup for PCS440EP board
363
Stefan Roese4526c872006-06-06 10:59:12 +0200364* Update PCS440EP port to fit into one flash device (incl. environment)
365 Patch by Stefan Roese, 06 Jun 2006
366
Wolfgang Denk2fd9eb52006-06-02 17:04:21 +0200367* Add support for PCS440EP board
368 Patch by Stefan Roese, 02 Jun 2006
369
Wolfgang Denke15cd6f2006-06-02 16:47:10 +0200370* Fix examples/Makefile; some build targets were lost
Wolfgang Denk2fd9eb52006-06-02 17:04:21 +0200371
Wolfgang Denk62b8f542006-06-02 11:46:20 +0200372* Fix watchdog handling in CFI flash driver
373 Just use udelay() when waiting for status changes which will
374 implicitely trigger the watchdog.
375
Wolfgang Denk392c2522006-05-30 23:32:44 +0200376* Fix PCI to memory window size problems on PM82x boards
377 We use the "automatic" mode that was used for the MPC8266ADS and
378 MPC8272 boards. Eventually this should be used on all boards?]
379 Patch by Wolfgang Grandegger, 17 Jan 2006
380
Wolfgang Denkb9b24802006-05-30 17:45:30 +0200381* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
382 Patch by Stefan Roese, 29 May 2006
383
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200384* Update Intel IXP4xx support
385 - Add IXP4xx NPE ethernet MAC support
386 - Add support for Intel IXDPG425 board
387 - Add support for Prodrive PDNB3 board
388 - Add IRQ support
389 Patch by Stefan Roese, 23 May 2006
390
Stefan Roese5770a1e2006-05-18 19:21:53 +0200391* Fix problem in PVR detection for 440GR
392 Patch by Stefan Roese, 18 May 2006
393
Marian Balakowiczb62fa912006-05-17 12:18:48 +0200394* Fix gcc 3.4.x AFLAGS setting for m68k platform.
395
Marian Balakowicz27333f82006-05-17 12:16:26 +0200396* Enable autoboot for M5271EVB board.
397
Stefan Roese56ced702006-05-15 15:11:20 +0200398* Changed default ramdisk addr in yosemite/yellowstone ports
399 Patch by Stefan Roese, 15 May 2006
400
Wolfgang Denk65165252006-05-15 13:52:51 +0200401* Fix PCMCIA support on virtlab2
402
Wolfgang Denk8cba0902006-05-12 16:15:46 +0200403* Add support for VirtLab2 board
404 (needed because of differences in the PCMCIA hardware).
405
Wolfgang Denk977b50f2006-05-10 17:43:20 +0200406* Minor cleanup.
407
Stefan Roese278bc4b2006-05-10 15:06:58 +0200408* Update yosemite configuration to enable flash write buffer support
409 Patch by Stefan Roese, 10 May 2006
410
Stefan Roesef90a3922006-05-10 15:01:40 +0200411* Fix compile warnings in common/xyzModem.c
412 Patch by Stefan Roese, 10 May 2006
413
Stefan Roese512f8d52006-05-10 14:10:41 +0200414* Add support for AMCC 440EP Rev C and 440GR Rev B
415 Patch by John Otken, 08 May 2006
416
Stefan Roesed1dd22f2006-05-10 11:49:37 +0200417* OMAP 5912/OSK: update EMIFS CS1 timings:
418 Problems have been seen in the linux kernel's smc91x network driver
419 due to improper bus timings. The latest 2.6 OMAP kernels currently
420 have a workaround, but this fix belongs in u-boot.
421 Patch by Kevin Hilman, 13 Oct 2005
422
Stefan Roese77f63342006-05-10 11:28:48 +0200423* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
424 Patch by Hiroki Kaminaga, 11 Mar 2006
425
Stefan Roese6080a0e2006-05-10 10:55:16 +0200426* Update omap5912osk board support
427 - Fix OMAP support that omap5912osk compiles in current source tree
428 - Update with code from "http://omap.spectrumdigital.com/osk5912"
429 to fix problems with DDR initialization
430 - Fix timer setup
431 - Use CFI flash driver and support complete 32MB of onboard flash
432 - Add "print_cpuinfo()" and "checkboard()" functions to display
433 CPU (with frequency) and Board infos
434 Patch by Stefan Roese, 10 May 2006
435
Wolfgang Denk4af099b2006-05-09 13:49:12 +0200436* Fix watchdog issues for ColdFire boards.
437
Marian Balakowicz78b123c2006-05-09 11:54:44 +0200438* Add M5271EVB board support.
439
Marian Balakowicz6f5155a2006-05-09 11:51:51 +0200440* Make R5200 specific low level initialization board conditional.
441
Wolfgang Denk4af099b2006-05-09 13:49:12 +0200442* Update CPU target identification strings for ColdFire family.
Marian Balakowiczb75ef852006-05-09 11:45:31 +0200443
Marian Balakowiczb4853b72006-05-09 11:43:59 +0200444* Update register definitions for MCF5271.
445
Marian Balakowicz0c056f02006-05-09 11:37:13 +0200446* Fix serial console support for MCF5271.
447
Marian Balakowicz483a0cf2006-05-09 11:28:36 +0200448* Fixes for gcc 3.4 based m68k toolchain,
449 based on patch by Jate Sujjavanich.
450
Wolfgang Denkf149d862006-05-05 00:59:28 +0200451* Fix lowboot support on MCC200 board
452
Kumar Gala8fe9bf62006-04-20 13:45:32 -0500453* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
454 - Removed MPC8349ADS port
455 - Added PCI support to MPC8349ADS
456 - reworked memory map to allow mapping of all regions with BATs
Wolfgang Denk4af099b2006-05-09 13:49:12 +0200457 Patch by Kumar Gala, 20 Apr 2006
Kumar Gala8fe9bf62006-04-20 13:45:32 -0500458
Wolfgang Denk610cf362006-05-03 01:24:04 +0200459* Coding Style cleanup
460
Wolfgang Denkda4849f2006-05-03 01:04:58 +0200461* Write RTC seconds first to maintain settings integrity per
462 Maxim/Dallas DS1306 data sheet.
463 Patch by Alan J. Luse, 02 May 2006
464
Wolfgang Denk983bebb2006-05-03 01:00:39 +0200465* Scheduled for removal: strnicmp() which is unused
466
467* Update for Intel Monahans boards:
468 - support for magic key detection and handling on delta board
469 - NAND support for zylonite board + some minor cleanup
470
Wolfgang Denk8546e232006-05-02 00:11:25 +0200471* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
Wolfgang Denkda4849f2006-05-03 01:04:58 +0200472 Patch by Jon Loeliger, 01 May 2006
Wolfgang Denk8546e232006-05-02 00:11:25 +0200473
Wolfgang Denk3577d3a2006-04-28 21:24:32 +0200474* Fixed handling of bad checksums with "mkimage -l"
475
dzu@denx.de6ca24c62006-04-21 18:30:47 +0200476* Added support for BC3450 board
Wolfgang Denkda4849f2006-05-03 01:04:58 +0200477 Patch by Stefan Strobl, 21 Oct 2005
dzu@denx.de6ca24c62006-04-21 18:30:47 +0200478
dzu@denx.dea367d422006-04-19 11:52:46 +0200479* Update for NC650 board:
480 - Support rev1 and rev2 hardware
481 - adapt to new NAND layer
482 - add CP850 configuration based on NC650
483
Wolfgang Denk8419c012006-04-18 11:05:03 +0200484* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
485 is configured; othrwise DMA accesses aren't cache coherent which
486 causes for example USB to fail.
487
Wolfgang Denkcf48eb92006-04-16 10:51:58 +0200488* Some code cleanup
489
490* Fix dbau1x00 boards broken by dbau1550 patch
491 PLL:s were not set for boards other than 1550.
492 Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
493 Default boot is now bootp for cards other than 1550.
494 Patch by Thomas Lange, 10 Aug 2005
Wolfgang Denk27e166b2005-12-19 13:02:45 +0100495
Heiko Schocherbb741402006-04-11 14:39:21 +0200496* Fixes common/cmd_flash.c:
Wolfgang Denkcf48eb92006-04-16 10:51:58 +0200497 - fix some compiler/parser error, if using m68k tool chain
498 - optical fix for protect on/off all messages, if using more
499 then one bank
500 Patch by Jens Scharsig, 28 Jul 2005
Wolfgang Denk27e166b2005-12-19 13:02:45 +0100501
Wolfgang Denkb81a4632006-04-13 16:35:22 +0200502* Fix Quad UART mapping on MCC200 board due to new HW revision
503
Wolfgang Denkb28a31c2006-04-12 12:26:32 +0200504* Fix JFFS2 support for legacy NAND driver.
505
506* Remove dependencies between DoC code and old legacy NAND driver.
507
508* Fix PM828_PCI target, for which PCI was *not* configured in.
509
Wolfgang Denk5fbb2cd2006-04-06 11:35:18 +0200510* Fix Lite5200B support: initialize SDelay register
511 See Freescale's AN3221 "MPC5200B SDRAM Initialization and
512 Configuration", 3.3.1 SDelay--MBAR + 0x0190
513
Stefan Roese2662b402006-04-01 13:41:03 +0200514* Changes/fixes for drivers/cfi_flash.c:
515
516 - Add Intel legacy lock/unlock support to common CFI driver
517
518 On some Intel flash's (e.g. Intel J3) legacy unlocking is
519 supported, meaning that unlocking of one sector will unlock
520 all sectors of this bank. Using this feature, unlocking
521 of all sectors upon startup (via env var "unlock=yes") will
522 get much faster.
523
524 - Fixed problem with multiple reads of envronment variable
525 "unlock" as pointed out by Reinhard Arlt & Anders Larsen.
526
527 - Removed unwanted linefeeds from "protect" command when
528 CFG_FLASH_PROTECTION is enabled.
529
530 - Changed p3p400 board to use CFG_FLASH_PROTECTION
531
532 Patch by Stefan Roese, 01 Apr 2006
533
534* Changes/fixes for drivers/cfi_flash.c:
535 - Correctly handle the cases where CFG_HZ != 1000 (several
536 XScale-based boards)
537 - Fix the timeout calculation of buffered writes (off by a
538 factor of 1000)
539 Patch by Anders Larsen, 31 Mar 2006
540
Stefan Roese35118532006-03-31 15:18:37 +0200541* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
542
543 405 SDRAM: - The SDRAM parameters can now be defined in the board
Wolfgang Denkcf48eb92006-04-16 10:51:58 +0200544 config file and the 405 SDRAM controller values will
545 be calculated upon bootup (see PPChameleonEVB).
546 When those settings are not defined in the board
547 config file, the register setup will be as it is now,
548 so this implementation should not break any current
549 design using this code.
Stefan Roese35118532006-03-31 15:18:37 +0200550
Wolfgang Denkcf48eb92006-04-16 10:51:58 +0200551 Thanks to Andrea Marson from DAVE for this patch.
Stefan Roese35118532006-03-31 15:18:37 +0200552
553 440 DDR: - Added function sdram_tr1_set to auto calculate the
Wolfgang Denkcf48eb92006-04-16 10:51:58 +0200554 TR1 value for the DDR.
555 - Added ECC support (see p3p440).
Stefan Roese35118532006-03-31 15:18:37 +0200556
557 Patch by Stefan Roese, 17 Mar 2006
558
Wolfgang Denkdb28ddb2006-04-03 15:46:10 +0200559* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
560 Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
561
Wolfgang Denk534ff672006-04-01 15:52:46 +0200562* Add support for ymodem protocol download
563 Patch by Stefano Babic, 29 Mar 2006
564
565* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
566 Merge from Markus Klotzbücher's repo, 01 Apr 2006
567
Wolfgang Denkd87080b2006-03-31 18:32:53 +0200568* GCC-4.x fixes: clean up global data pointer initialization for all
569 boards
570
Wolfgang Denkf6dbbe92006-03-25 18:42:54 +0100571* Update for Delta board:
572 - redundant NAND environment
573 - misc Monahans cleanups (remove dead code etc.)
574 - DA9030 Initialization; some minimal changes to PXA I2C driver to
575 make it work with the Monahans.
576 - Make Monahans clock frequency configurable using
577 CFG_MONAHANS_RUN_MODE_OSC_RATIO and
578 CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
579 Merge from Markus Klotzbücher's repo, 25 Mar 2006
580
Wolfgang Denk05d8dce2006-03-23 17:10:30 +0100581* Enable Quad UART om MCC200 board.
582
Wolfgang Denk5725f942006-03-21 01:58:07 +0100583* Cleanup MCC200 board configuration; omit non-existent stuff.
584
Wolfgang Denk0b6ba542006-03-19 01:01:51 +0100585* Add support for MPC859/866 Rev. A.0
586
Marian Balakowiczd326f4a2006-03-16 15:19:35 +0100587* Add command for handling DDR ECC registers on MPC8349EE MDS board.
588
Marian Balakowicz97f98002006-03-16 14:35:32 +0100589* Fix DDR ECC bit definitions for MPC83xx.
590
Marian Balakowicz991425f2006-03-14 16:24:38 +0100591* Add initial support for MPC8349E MDS board.
592
Marian Balakowicz4c8d1ec2006-03-14 16:23:35 +0100593* Add support for ECC DDR initialization on MPC83xx.
594
Marian Balakowicz61f25152006-03-14 16:14:48 +0100595* Add DMA support for MPC83xx.
596
Marian Balakowicz6d8ae5a2006-03-14 16:12:48 +0100597* Add sync in do_reset() routine for MPC83xx after RPR register
598 was written to. It is need on some targets when BAT translation
599 is enabled.
600
Marian Balakowicze24e0f02006-03-14 16:03:46 +0100601* Add bit definitions for MPC83xx DDR controller registers.
602
Marian Balakowiczcd94ba32006-03-14 16:02:31 +0100603* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
604
Marian Balakowicza7c66ad2006-03-14 16:01:25 +0100605* Correct shift offsets in icache_status and dcache_status for MPC83xx.
606
Marian Balakowicz6e53e272006-03-14 15:59:25 +0100607* Add support for DS1374 RTC chip.
608
Wolfgang Denk09e4b0c2006-03-17 11:42:53 +0100609* Add support for Lite5200B board.
610 Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
611
Wolfgang Denkff7fefe2006-03-13 12:37:35 +0100612* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
613 timer and cpu_reset code from cpu/$(CPU) into the new
614 cpu/$(CPU)/$(SOC) directories
615 Patch by Andreas Engel, 13 Mar 2006
616
Stefan Roese15940c92006-03-13 11:16:36 +0100617* Change max size of uncompressed uImage's to 8MByte and add
618 CFG_BOOTM_LEN to adjust this setting.
619
620 As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
621 uImages was restricted to 4MBytes. This default size is now
622 increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
623 in the board config file.
624
625 Patch by Stefan Roese, 13 Mar 2006
626
Stefan Roesef3fecfe2006-03-13 09:43:01 +0100627* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
628 Patch by Stefan Roese, 13 Mar 2006
629
Stefan Roese9a7b4082006-03-13 09:42:28 +0100630* cpu/ppc4xx/start.S : exceptions are enabled after relocation
Wolfgang Denk86f5f032006-03-13 12:22:03 +0100631 Patch by Cedric Vincent, 06 Jul 2005
Stefan Roese9a7b4082006-03-13 09:42:28 +0100632
Wolfgang Denk95515302006-03-13 01:00:22 +0100633* au1x00_eth.c: check malloc return value and abort if it failed
634 Patch by Andrew Dyer, 26 Jul 2005
635
Wolfgang Denkc15f80e2006-03-13 00:50:48 +0100636* Change the sequence of events in soft_i2c.c:send_ack() to keep from
637 incorrectly generating start/stop conditions on the bus.
638 Patch by Andrew Dyer, 26 Jul 2005
639
Wolfgang Denkb38dbd42006-03-13 00:46:05 +0100640* Fix bug in [id]cache_status commands for MPC85xx processors;
641 should look at LSB of L1CSRn registers to determine if L1 cache is
642 enabled, not the MSB.
643 Patch by Murray Jensen, 19 Jul 2005
644
Wolfgang Denkf07217c2006-03-12 23:27:46 +0100645* Fix array overflow with fw_setenv on uninitialised environment
646 Patch by Murray Jensen, 15 Jul 2005
647
Wolfgang Denk84c960c2006-03-12 23:17:31 +0100648* Add support for EmbeddedPlanet EP88x boards
649 Patch by Yuli Barcohen, 13 Jul 2005
650
Wolfgang Denk763b5f32006-03-12 23:13:27 +0100651* Remove board specific configuration includes from the common xilinx
652 ethernet and iic adapter code.
653 Patch by Michael Libeskind, 12 Jul 2005
654
Wolfgang Denkbe5048f2006-03-12 22:50:55 +0100655* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
656 Patch by Murray Jensen, 08 Jul 2005
657
Wolfgang Denkca273812006-03-12 22:45:47 +0100658* Add (some) definitions for the MPC85xx local bus controller
659 Patch by Murray Jensen, 08 Jul 2005
660
Wolfgang Denk8123eee2006-03-12 22:41:33 +0100661* Add CPM2 I/O pin functions for MPC85xx processors
662 Patch by Murray Jensen, 08 Jul 2005
663
Wolfgang Denk7c609082006-03-12 22:14:20 +0100664* Fix compile problem
665
Kumar Gala86902b82006-01-12 19:51:38 -0600666* Added PCI support for MPC8349ADS board
667 Patch by Kumar Gala 11 Jan 2006
668
Kumar Gala2688e2f2006-02-10 15:40:06 -0600669* Enable address translation on MPC83xx
670 Patch by Kumar Gala, 10 Feb 2006
671
Kumar Galac99f3842006-01-25 16:12:46 -0600672* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
673 Patch by Kumar Gala, 25 Jan 2006
674
Kumar Galab9704802006-01-23 16:22:57 -0600675* Fixed defines for MPC83xx SICRL register to match current specs
676 Patch by Kumar Gala, 23 Jan 2006
677
Kumar Galaec00c332006-01-11 11:23:01 -0600678* Only disable the MPC83xx watchdog if its enabled out of reset.
679 If its disabled out of reset SW can later enable it if so desired
680 Patch by Kumar Gala, 11 Jan 2006
681
Kumar Galaa15b44d2006-01-11 11:21:14 -0600682* Allow config of GPIO direction & data registers at boot on 83xx
683 Patch by Kumar Gala, 11 Jan 2006
684
Kumar Galace574ff2006-01-11 11:19:12 -0600685* Enable time handling on 83xx
686 Patch by Kumar Gala, 11 Jan 2006
687
Kumar Gala9260a562006-01-11 11:12:57 -0600688* Make System IO Config Registers board configurable on MPC83xx
689 Patch by Kumar Gala, 11 Jan 2006
690
Kumar Galadffb70f2006-01-12 15:30:24 -0600691* Fixed PCI indirect config ops to handle multiple PCI controllers
692 We need to adjust the bus number we are trying to access based
693 on which PCI controller its on
Wolfgang Denk795bee82006-03-12 21:33:52 +0100694 Patch by Kumar Gala, 12 Jan 2006
Kumar Galadffb70f2006-01-12 15:30:24 -0600695
Kumar Gala3411d112006-01-11 13:27:19 -0600696* Report back PCI bus when doing table based device config
Wolfgang Denk795bee82006-03-12 21:33:52 +0100697 Patch by Kumar Gala, 11 Jan 2006
Kumar Gala3411d112006-01-11 13:27:19 -0600698
Kumar Galaa1790122006-01-11 13:24:15 -0600699* Added support for PCI prefetchable region and BARs
700 If a host controller sets up a region as prefetchable and
701 a device's BAR denotes it as prefetchable, allocate the
702 BAR into the prefetch region.
703
704 If a BAR is prefetchable and no prefetchable region has
705 been setup by the controller we fall back to allocating
706 the BAR into the normally memory region.
Wolfgang Denk795bee82006-03-12 21:33:52 +0100707 Patch by Kumar Gala, 11 Jan 2006
Kumar Galaa1790122006-01-11 13:24:15 -0600708
Kumar Gala62ec6412006-01-11 16:48:10 -0600709* Add helper function for generic flat device tree fixups for mpc83xx
Wolfgang Denka3f01692006-03-12 19:11:42 +0100710 Patch by Kumar Gala, 11 Jan 2006
Kumar Gala62ec6412006-01-11 16:48:10 -0600711
Kumar Galae559a692006-01-11 16:41:35 -0600712* Add support for passing initrd information via flat device tree
Wolfgang Denka3f01692006-03-12 19:11:42 +0100713 Patch by Kumar Gala, 11 Jan 2006
Kumar Galae559a692006-01-11 16:41:35 -0600714
Kumar Galac2871f02006-01-11 13:59:02 -0600715* Added OF_STDOUT_PATH and OF_SOC
716
717 OF_STDOUT_PATH specifies the path to the device the kernel can use
718 for console output
719
720 OF_SOC specifies the proper name of the SOC node if one exists.
Wolfgang Denka3f01692006-03-12 19:11:42 +0100721 Patch by Kumar Gala, 11 Jan 2006
Kumar Galac2871f02006-01-11 13:59:02 -0600722
Wolfgang Denka3f01692006-03-12 19:11:42 +0100723* Allow board code to fixup the flat device tree before booting a kernel
724 Patch by Kumar Gala, 11 Jan 2006
Kumar Gala4e253132006-01-11 13:54:17 -0600725
Kumar Galae4f880e2006-01-11 13:49:31 -0600726* Added CONFIG_ options for bd_t and env in flat dev tree
727
728 CONFIG_OF_HAS_BD_T will put a copy of the bd_t
729 into the resulting flat device tree.
730
731 CONFIG_OF_HAS_UBOOT_ENV will copy the environment
732 variables from u-boot into the flat device tree
733
Wolfgang Denka3f01692006-03-12 19:11:42 +0100734 Patch by Kumar Gala, 11 Jan 2006
Kumar Galae4f880e2006-01-11 13:49:31 -0600735
Wolfgang Denk3b2e4fd2006-03-12 18:26:46 +0100736* Add support for the DHCP vendor optional bootfile (#67).
737 Ignores the vendor TFTP server name option (#66).
738 Patch by Murray Jensen, 30 Jun 2005
739
Wolfgang Denk03469832006-03-12 18:09:47 +0100740* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
741 Patch by Andy Fleming, 14 Jun 2005
742
Wolfgang Denkd8169c92006-03-12 18:06:37 +0100743* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
744 Patch by Gerhard Jaeger, 21 Jun 2005
745
Wolfgang Denk0a3471f2006-03-12 16:57:35 +0100746* Add netconsole and some more commands to RPXlite_DW board
747 Patch by Sam Song, 19 Jun 2005
748
Wolfgang Denk993a2272006-03-12 16:54:11 +0100749* Fix bad declaration on pci_cfgfunc_nothing
750 Patch by Sam Song, 19 Jun 2005
751
Wolfgang Denk953c5b62006-03-12 16:51:59 +0100752* Adjust "echo" as a default command
753 Patch by Sam Song, 19 Jun 2005
754
Wolfgang Denk23466d62006-03-12 16:14:29 +0100755* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
756 Patch by KokHow Teh, 16 Jun 2005
757
Wolfgang Denk74f92e62006-03-12 16:05:05 +0100758* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
759 Patch by Rick Bronson, 15 Jun 2005
760
Wolfgang Denk8e7b7032006-03-12 02:55:22 +0100761* Coding Style cleanup
762
Wolfgang Denk1264b402006-03-12 02:20:55 +0100763* Avoid dereferencing NULL in find_cmd() if no valid commands were found
764 Patch by Andrew Dyer, 13 Jun 2005
765
Wolfgang Denk0afe5192006-03-12 02:10:00 +0100766* Add ADI Blackfin support
767 - add support for Analog Devices Blackfin BF533 CPU
768 - add support for the ADI BF533 Stamp uClinux board
769 - add support for the ADI BF533 EZKit board
770 Patches by Richard Klingler, 11 Jun 2005
771
Wolfgang Denkdc013d42006-03-12 01:59:35 +0100772* Add loads of ntohl() in image header handling
773 Patch by Steven Scholz, 10 Jun 2005
774
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100775* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
776 variable to set clock
777 Patch by Yuli Barcohen, 05 Jun 2005
778
Wolfgang Denkf47b6612006-03-12 01:48:55 +0100779* RPXlite configuration fixes
780 - Use correct flash sector size
781 - Use correct memory test end address
782 - Add support for bzip2 compression
783 - Various small fixes
784 Patch by Yuli Barcohen, 05 Jun 2005
785
Wolfgang Denkaba9f1a2006-03-12 01:45:44 +0100786* Memory configuration changes for ZPC.1900 board
787 - Fix SDRAM timing on both local bus and 60x bus
788 - Add support for second flash bank (SIMM)
789 - Change boot flash base
790 Patch by Yuli Barcohen, 05 Jun 2005
791
Wolfgang Denk5797b822006-03-12 01:43:03 +0100792* Add support for Adder boards with 16MB SDRAM;
793 add support for second FEC on Adder87x board.
794 Patch by Yuli Barcohen, 05 Jun 2005
Wolfgang Denk8e7b7032006-03-12 02:55:22 +0100795
Wolfgang Denk7c54c702006-03-12 01:40:01 +0100796* Fix conditional for including ks8695eth driver
797 Patch by Greg Ungerer, 04 Jun 2005
798
Wolfgang Denk92b197f2006-03-12 01:37:50 +0100799* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
800 Patch by Friedrich Lobenstock, 02 Jun 2005
801
Wolfgang Denk82d716f2006-03-12 01:30:45 +0100802* Fix comment in common/soft_i2c.c
803 Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
804
Wolfgang Denk611125a2006-03-12 01:23:43 +0100805* Cleanup compiler warnings.
806 Patch by Greg Ungerer, 21 May 2005
807
Wolfgang Denk22814902006-03-12 01:21:19 +0100808* Word alignment fixes for word aligned NS16550 UART
809 Patch by Jean-Paul Saman, 01 Mar 2005
810
811 Fixes bug with UART that only supports word aligned access: removed
812 "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
813 (broken!) versions of GCC generate byte accesses when encountering
814 the packed attribute regardless if the struct is already correctly
815 aligned for a platform. Peripherals that can only handle word
816 aligned access won't work properly when accessed with byte access.
817 The struct NS16550 is already word aligned for REG_SIZE = 4, so
818 there is no need to packed the struct in that case.
819
Wolfgang Denkd509b812006-03-12 01:13:30 +0100820* Fix behaviour if gatewayip is not set
821 Patch by Robin Gilks, 23 Dec 2004
822
Wolfgang Denk84ef51a2006-03-12 00:04:20 +0100823* Fix cleanup for netstart board.
824 Remove build results from repository
825
Wolfgang Denkd52fb7e2006-03-11 22:53:33 +0100826* Some code cleanup for GCC 4.x
827
Wolfgang Denk4367a012006-03-11 19:15:27 +0100828* Fixes to support environment in NAND flash;
829 enable NAND flash based environment for delta board.
830
Wolfgang Denk9c575e52006-03-07 00:33:28 +0100831* Add support for Intel Monahans CPU on Zylonite and Delta boards
832 (This is Work in Progress!)
833
Wolfgang Denk1f62bc22006-03-07 00:32:07 +0100834* Add support for TQM8260-AI boards.
835
Wolfgang Denkbfc81252006-03-06 13:03:37 +0100836* Minor code cleanup
837
Wolfgang Denk4e3ccd22006-03-06 11:25:22 +0100838* Merge the new NAND code (testing-NAND brach); see doc/README.nand
Bartlomiej Sieka038ccac2006-02-24 09:37:22 +0100839 Rewrite of NAND code based on what is in 2.6.12 Linux kernel
840 Patch by Ladislav Michl, 29 Jun 2005
841
Stefan Roesef1ee9822006-03-04 14:57:03 +0100842* Add lowboot target to mcc200 board
843 Patch by Stefan Roese, 4 Mar 2006
844
Stefan Roesef18e8742006-03-01 17:00:49 +0100845* Fix problem with flash_get_size() from CFI driver update
846 Patch by Stefan Roese, 1 Mar 2006
847
Wolfgang Denk4f718662006-03-02 11:03:05 +0100848* Make CFG_NO_FLASH work on ARM systems
849 Patch by Markus Klotzbuecher, 27 Feb 2006
850
Wolfgang Denk82f2e332006-02-28 18:39:20 +0100851* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
852 use hush shell.
853
Stefan Roese58ad4972006-02-28 15:33:28 +0100854* Convert mcc200 to use common CFI flash driver
855 Patch by Stefan Roese, 28 Feb 2006
856
Stefan Roese79b4cda2006-02-28 15:29:58 +0100857* Add env-variable "unlock" to handle initial state of sectors
858 (locked/unlocked).
859
860 Only the U-Boot image and it's environment is protected,
861 all other sectors are unprotected (unlocked) if flash
862 hardware protection is used (CFG_FLASH_PROTECTION) and
863 the environment variable "unlock" is set to "yes".
864
865 Patch by Stefan Roese, 28 Feb 2006
866
867* Update drivers/cfi_flash.c:
868 - find_sector() called in both versions of flash_write_cfiword()
869 Patch by Peter Pearse, 27th Feb 2006
870
871* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
872 Patch by Jose Maria Lopez, 16 Jan 2006
873
874* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
875 Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
876
877* Changes/fixes for drivers/cfi_flash.c:
878 We *should* check if there are any error bits if the previous call
879 returned ERR_OK (Otherwise we will have output an error message in
880 flash_status_check() already.) The original code would only check for
881 error bits if flash_status_check() returns ERR_TIMEOUT.
882 Patch by Marcus Hall, 23 Aug 2005
883
884* Changes/fixes for drivers/cfi_flash.c:
885 - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
886 - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
887 Patch by Sangmoon Kim, 19 Aug 2005
888
889* Fixes for drivers/cfi_flash.c:
890 - Fix wrong timeout value usage in flash_status_check()
891 - Round write_tout up when converting to msec in flash_get_size()
892 - Remove clearing flash status at the end of flash_write_cfibuffer()
893 which sets Intel 28F640J3 flash back to command mode on CSB472
894 Patch by Tolunay Orkun, 02 July 2005
895
Heiko Schocher075866d2006-02-20 17:34:12 +0100896* Add basic support for the SMMACO4 Board from PanDaCom.
897 Patch by Heiko Schocher, 20 Feb 2006
898
Wolfgang Denk881a87e2006-02-21 17:33:04 +0100899* Add GIT version information (commid ID) to untagged U-Boot versions
900
901 As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
902 of all unreleased (untagged) U-Boot images will be automatically
903 extended upon compiletime with a part of the GIT commit ID and
904 possibly with "dirty" if uncommited changes are detected.
905
906 Here an example for the resulting version:
907 "U-Boot 1.1.4-g3457ac18-dirty"
908
909 The version is now maintained in the toplevel Makefile and the
910 version headers are autogenerated.
911
912 Patch by Stefan Roese, 9 Feb 2006
913
Wolfgang Denk84e106c2006-02-07 15:18:25 +0100914* Update default environment for INKA4x00 board.
915
Stefan Roese79830d52006-02-08 15:54:15 +0100916* Convert CPCI750 to use common CFI flash driver
917 Patch by Reinhard Arlt, 8 Feb 2006
918
Stefan Roese48a05a52006-02-07 16:51:04 +0100919* Various changes to esd HH405 board specific files
920 Patch by Matthias Fuchs, 07 Feb 2006
921
Wolfgang Denk57cac1f2006-01-29 19:12:41 +0100922* Cleanup U-Boot boot messages on ARM.
923
924 To match the U-Boot user interface on ARM platforms to the U-Boot
925 standard (as on PPC platforms), some messages with debug character
926 are removed from the default U-Boot build.
927 Enable DEBUG for lib_arm/board.c to enable debug messages.
928 New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
Wolfgang Denkcf48eb92006-04-16 10:51:58 +0200929 Patch by Stefan Roese, 24 Jan 2006
Wolfgang Denk57cac1f2006-01-29 19:12:41 +0100930
Stefan Roese18c5e642006-01-18 20:06:44 +0100931* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
932 Patch by Stefan Roese, 18 Jan 2006
933
Stefan Roesea7b9fb92006-01-18 20:05:34 +0100934* Add VGA support (CT69000) to CPCI750 board.
935 Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
936 Patch by Reinhard Arlt, 30 Dec 2005
937
Stefan Roese2076d0a2006-01-18 20:03:15 +0100938* PMC405 and CPCI405: Moved configuration of pci resources
939 into config file.
940 PMC405 and CPCI2DP: Added firmware download and booting via pci.
941 Patch by Matthias Fuchs, 20 Dec 2005
942
Zachary P. Landauf8c3b4f2006-01-26 17:38:46 -0500943* Add ColdFire targets to MAKEALL script
944 Patch by Zachary Landau, 26 Jan 2006
945
Zachary P. Landau3a108ed2006-01-26 17:37:59 -0500946* Add support for r5200 board
947 Patch by Zachary Landau, 26 Jan 2006
948
Zachary P. Landaueacbd312006-01-26 17:35:56 -0500949* Add support for Freescale M5271 processor
950 Patch by Zachary Landau, 26 Jan 2006
951
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100952* Fix 28F256J3A support on PM520 board
953 (without bank-switching only 32 MB can be accessed)
954
Wolfgang Denk756ceb82006-01-11 13:04:53 +0100955* Fix mkimage bug with multifile images created on 64 bit systems.
956
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100957* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
Wolfgang Denkc7428d42005-12-29 15:12:09 +0100958
Wolfgang Denk27e166b2005-12-19 13:02:45 +0100959* Fix compiler problem with at91rm9200dk board.
960 Patch by Eugen Bigz, 19 Dec 2005
961
962======================================================================
Stefan Roeseb79316f2005-08-15 12:31:23 +0200963Changes for U-Boot 1.1.4:
964======================================================================
965
Stefan Roese81a31702005-12-15 09:43:12 +0100966* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
967 - Changed GPIO setup to enable another address line in order to
968 address 64M of FLASH.
969 - Added function sdram_tr1_set to auto calculate the tr1 value for
970 the DDR.
971 Patch by Steven Blakeslee, 12 Dec 2005
972
Wolfgang Denka9e642e2005-12-16 15:14:18 +0100973* MPC5200: Set PCI retry counter to 0 = infinite retry;
974 The default of 255 is too short for slow devices.
975 Patch by Martin Nykodym, 12 Dec 2005
976
Marian Balakowicz3a7b1422005-12-06 20:33:07 +0100977* Change port configuration for O2DNT (CODEC1 on PSC1).
978
Wolfgang Denk74812662005-12-12 16:06:05 +0100979* Fix register for PCI async mode on PPC440EP
980 Patch by Youngchul Bang, 08 Dec 2005
981
982* Fix U-Boot linking problems (add .eh_frame segment to linker script)
983 This segment may be required by some libgcc.a functions
984 (like _udivdi3).
985
Wolfgang Denka889bd22005-12-06 15:02:31 +0100986* Fix DPRAM offset/size for MPC8541/8555.
987 Simplify TQM85xx Makefile handling.
988
Wolfgang Denk41253be2005-12-04 11:20:57 +0100989* Fix data overflow (typo?) in rtc/ds1302.c
990
Wolfgang Denkc75eba32005-12-01 02:15:07 +0100991* Fix U-Boot compilation for MIPS boards using ELDK 4.0
992
Stefan Roesed96f41e2005-11-30 13:06:40 +0100993* Add support for TQM8541/8555 boards, TQM85xx support reworked:
994 - Support for TQM8541/8555 boards added.
995 - Complete rework of TQM8540/8560 support.
996 - Common TQM85xx code now supports all current TQM85xx platforms
997 (TQM8540/8541/8555/8560).
998 - DDR SDRAM size detection added.
999 - CAS latency default values can be overwritten by setting "serial#"
1000 to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
1001 If problems are detected with this non default CAS latency,
Wolfgang Denk4a86d772005-12-01 01:38:13 +01001002 the default values will be used instead.
1003 - Flash size detection added.
Stefan Roesed96f41e2005-11-30 13:06:40 +01001004 - Moved FCC ethernet driver initialization behind TSEC driver init
1005 -> TSEC is first device.
1006 Patch by Stefan Roese, 30 Nov 2005
1007
Stefan Roese6e7fb6e2005-11-29 18:18:21 +01001008* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
1009 Patch by John Otken, 23 Nov 2005
1010
Stefan Roese3d9569b2005-11-27 19:36:26 +01001011* Changed PPC44x startup message (cpu info, speed...) to common style:
1012 On PPC44x platforms, the startup message generated in "cpu.c" only
Wolfgang Denk4a86d772005-12-01 01:38:13 +01001013 comprised the ppc type and revision but not additional information
Stefan Roese3d9569b2005-11-27 19:36:26 +01001014 like speed etc. Those speed infos where printed in the board specific
1015 code. This new implementation now prints all CPU infos in the common
1016 cpu specific code. No board specific code is needed anymore and
1017 therefore removed from all current 44x implementations.
1018 Patch by Stefan Roese, 27 Nov 2005
1019
Wolfgang Denkb6f84352005-12-01 01:17:24 +01001020* Adjust TQM834x PHY addresses for latest hardware revision.
1021
Wolfgang Denkd00de232005-12-01 00:55:19 +01001022* Increase malloc arena on TQM5200 board to 256 kB.
1023 With 64 kb uniform flash sector size the old value of 128 kB was
1024 too small.
Wolfgang Denkf013dac2005-12-04 00:40:34 +01001025
Wolfgang Denkd00de232005-12-01 00:55:19 +01001026* Fix miiphy global data initialization (problem on 4xx boards when
1027 no ethaddr is assigned). Initialization moved from
1028 miiphy_register() to eth_initialize().
Marian Balakowiczd9785c12005-11-30 18:06:04 +01001029
1030 Based on initial patch for 4xx platform by Matthias Fuchs.
1031
Wolfgang Denkf08abe32005-11-25 16:38:03 +01001032* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
1033
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +01001034* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
1035 The COPYING file was extended to make clear that these files can be
1036 used in non-GPL code, too.
Wolfgang Denkf08abe32005-11-25 16:38:03 +01001037 Also, a corresponding note was placed in the headers of the affected files.
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +01001038
Stefan Roese5568e612005-11-22 13:20:42 +01001039* Add support for Prodrive P3P440 board:
1040 - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
1041 - CFG_FLASH_QUIET_TEST added to use the common CFI driver
1042 for bank autodetection
1043 Patch by Stefan Roese, 22 Nov 2005
1044
Wolfgang Denkfe126d82005-11-20 21:40:11 +01001045* Change all '$(...)' variable references into '${...}'
1046 which makes the environment compatible with the hush shell.
1047 WARNING: Support for the old '$(...)' syntax will be
1048 discontinued in a later version.
1049
Rafal Jaworowski5a164c82005-11-17 00:26:18 +01001050* Minor changes to init flags in TQM834x PCI.
1051
Stefan Roese3ca37762005-11-15 16:26:34 +01001052* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
1053 Patch by Stefan Roese, 15 Nov 2005
1054
Stefan Roesefeaedfc2005-11-15 10:35:59 +01001055* New PPC 405EP board added: CMS700
1056 Added CONFIG_NET_MULTI for VOM405 board.
1057 Added reset_phy() for VOM405 board.
1058 Patch by Matthias Fuchs, 09 Nov 2005
1059
Stefan Roeseea339202005-11-08 09:00:09 +01001060* Updated PCI mapping for esd CPCI2DP board.
1061 Add support for error LED.
1062 Patch by Matthias Fuchs, 07 Nov 2005
1063
Stefan Roese527b5a52005-11-07 13:43:06 +01001064* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
1065 Patch by Stefan Roese, 07 Nov 2005
1066
Stefan Roese182e1062005-11-07 09:57:57 +01001067* Correct PPC Timebase register definitions (SPRN_TBRL...)
1068 Patch by Stefan Roese, 07 Nov 2005
1069
Stefan Roesef190c112005-11-05 15:50:16 +01001070* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
1071 Patch by Stefan Roese, 05 Nov 2005
1072
Stefan Roeseef04a0a2005-11-03 08:31:33 +01001073* Additional fix for external IRQ config on Yellowstone & Yosemite
1074 Patch by Stefan Roese, 03 Nov 2005
1075
Stefan Roese57275b62005-11-01 10:08:03 +01001076* Add support for Ocotea pass 3 with 440GX Rev. F
1077 Patch by Stefan Roese, 01 Nov 2005
1078
Stefan Roesee1902902005-10-28 12:21:06 +02001079* Fix external IRQ configuration on Yellowstone & Yosemite
1080 Patch by Stefan Roese, 28 Oct 2005
1081
Marian Balakowicz99eb35d2005-10-29 14:48:59 +02001082* Add support for multiple PHYs.
Wolfgang Denkbe360d92005-10-29 23:50:20 +02001083 Tested on the following boards:
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02001084 cmcpu2 (at91rm9200/ether.c)
Wolfgang Denkbe360d92005-10-29 23:50:20 +02001085 PPChameleon (ppc4xx/4xx_enet.c)
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02001086 yukon (mpc8220/fec.c)
1087 uc100 (mpc8xx/fec.c)
1088 tqm834x (mpc834x/tsec.c) with EEPRO100
Wolfgang Denkbe360d92005-10-29 23:50:20 +02001089 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
1090 Main changes include:
1091 common/miiphyutil.c
1092 - miiphy_register routine was added to allow multiple PHYs to be registered
1093 - miiphy_read and miiphy_write are now defined in this file, and
1094 require additional argument (char *devname)
1095 - other miiphy_* routines also require additional device name argument
1096 ../lib_i386/board.c
1097 ../lib_ppc/board.c
1098 Calling reset_phy() was moved to be executed *after* eth_initialize().
1099 This is necessary as now some of the implementations of reset_phy()
1100 may need to use miiphy_reset() which is not allowed before eth_initialize()
1101 as eth_initialize registers all required miiphy_* routines.
1102 Tested on IP860 and PHY initializes properly after this change.
Marian Balakowicz99eb35d2005-10-29 14:48:59 +02001103
1104* Correct includes for flat tree builder.
1105
1106* Fix conflicting types (flash_write()) in trab auto_update.c.
1107
Rafal Jaworowski6902df52005-10-17 02:39:53 +02001108* Add PCI support for the TQM834x board.
1109
Stefan Roesee9f11102005-10-20 16:40:17 +02001110* Add missing 4xx board to MAKEALL
1111 Patch by Stefan Roese, 20 Oct 2005
1112
Stefan Roesea5477752005-10-20 16:39:16 +02001113* Fix conflicting types (flash_write()) in esd auto_update.c
1114 Patch by Stefan Roese, 20 Oct 2005
1115
Stefan Roesec4c13df2005-10-20 16:36:44 +02001116* Fix problem with sleep in NetConsole (use get_timer())
1117 Patch by Stefan Roese, 20 Oct 2005
1118
Stefan Roese1e25f952005-10-20 16:34:28 +02001119* Add NetConsole Support for AMCC eval boards
1120 Patch by Stefan Roese, 20 Oct 2005
1121
Stefan Roesea93316c2005-10-18 19:17:12 +02001122* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
1123 Patch by Stefan Roese, 18 Oct 2005
1124
Stefan Roese3b6748e2005-10-14 15:37:34 +02001125* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
Wolfgang Denk326bf402005-10-17 00:24:00 +02001126 Fix identation on ext2ls help entry.
Stefan Roese3b6748e2005-10-14 15:37:34 +02001127 Patch by Stefan Roese, 14 Oct 2005
1128
Wolfgang Denk20a374f2005-10-15 18:43:50 +02001129* Add support for TQM834x boards.
1130 Cleanup.
1131
Wolfgang Denk77ddac92005-10-13 16:45:02 +02001132* Cleanup for GCC-4.x
1133
Wolfgang Denk17a8b272005-10-13 10:41:25 +02001134* Add documentation for Open Firmware Flat Tree and usage.
1135 Patch by Pantelis Antoniou, 13 Oct 2005
1136
Wolfgang Denk814d98f2005-10-13 01:59:29 +02001137* Add missing files for Pantelis Antoniou's patch
1138 Patch by Pantelis Antoniou, 04 Sep 2005
1139
Stefan Roese4f92ac32005-10-10 17:43:58 +02001140* Fix problem in ppc4xx eth-driver without ethaddr (only without
1141 CONFIG_NET_MULTI set)
1142 Patch by Stefan Roese, 10 Oct 2005
1143
Stefan Roesec29ab9d2005-10-08 10:19:07 +02001144* Fix gzip bmp support (test if malloc fails, warning when truncated).
1145 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
1146 Patch by Stefan Roese, 07 Oct 2005
1147
Wolfgang Denk070610c2005-10-13 01:49:09 +02001148* Add support for OF flat tree for the STXtc board.
1149 Patch by Pantelis Antoniou, 04 Sep 2005
1150
Wolfgang Denkf57f70a2005-10-13 01:45:54 +02001151* Support passing of OF flat trees to the kernel.
1152 Patch by Pantelis Antoniou, 04 Sep 2005
1153
Wolfgang Denk3df5bea2005-10-09 01:41:48 +02001154* Cleanup
1155
1156* Add support for NetSilicon NS7520 processor.
1157 Patch by Art Shipkowski, 12 May 2005
1158
Wolfgang Denk7521af12005-10-09 01:04:33 +02001159* Add support for AP1000 board.
1160 Patch by James MacAulay, 07 Oct 2005
1161
Wolfgang Denk95f9dda2005-10-09 00:33:37 +02001162* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
1163 Patch by Anders Larsen, 07 Oct 2005
1164
1165 The Atmel errata #11 states that the transfer buffer descriptor
1166 table must be aligned on a 16-word boundary. As it turned out, this
1167 is insufficient - it seems the table must be aligned on a boundary
1168 at least as large as the table itself (in Linux this is not an
1169 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
1170
Wolfgang Denk47340a42005-10-09 00:25:58 +02001171* Fixed compilation for ARM when using a (standard) hard-FP toolchain
Wolfgang Denk3df5bea2005-10-09 01:41:48 +02001172 Patch by Anders Larsen, 07 Oct 2005
Wolfgang Denk47340a42005-10-09 00:25:58 +02001173
Wolfgang Denk96782c62005-10-09 00:22:48 +02001174* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
1175 sed the linker scripts, rather than pre-process them.
1176 Patch by Peter Pearse, 07 Oct 2005
1177
Wolfgang Denk87cb6862005-10-06 17:08:18 +02001178* Update make target for ARM supported boards.
1179 Use lowlevel_init() instead of platformsetup() [rename].
1180 Patch by Peter Pearse, 06 Oct 2005
1181
Wolfgang Denkbccae902005-10-06 01:50:50 +02001182* Fix booting from serial dataflash on AT91RM9200
1183 Patch by Peter Menzebach, 29 Aug 2005
1184
Wolfgang Denk6ebc7922005-10-06 01:46:57 +02001185* Add JFFS2 support for TRAB board
1186 Patch by Martin Krause, 25 Aug 2005
1187
Wolfgang Denk5ae31ee2005-10-06 01:43:39 +02001188* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
1189 Patch by Marcus Hall, 24 Aug 2005
1190
Wolfgang Denkf5c254d2005-10-06 01:26:16 +02001191* Fix the machine-id of the Cogent csb637 board
1192 Patch by Anders Larsen, 05 Oct 2005
1193
Wolfgang Denk78da6072005-10-06 01:22:22 +02001194* Complete support for the KwikByte KB920x boards
1195 Patch by Anders Larsen, 05 Oct 2005
1196
Wolfgang Denkc0e82d52005-10-05 02:06:08 +02001197* Set the AT91RM9200 clock to asynchronous mode
1198 Patch by Anders Larsen, 03 May 2005
1199
Wolfgang Denk3b9dfdd2005-10-05 02:02:25 +02001200* Set the AT91RM9200 clock to synchronous mode
1201 Patch by Anders Larsen, 29 Apr 2005
1202
Wolfgang Denk645da512005-10-05 02:00:09 +02001203* Add support for Cogent csb637
1204 Patch by Anders Larsen, 29 Apr 2005
1205
Wolfgang Denkfef636b2005-10-05 01:54:04 +02001206* Fix dm9161.c initialization
1207 Patch by Anders Larsen, 29 Apr 2005
1208
Wolfgang Denk080bdb72005-10-05 01:51:29 +02001209* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
1210 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
1211
1212* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
1213 Patch by Anders Larsen, 29 Apr 2005
1214
Wolfgang Denk29ca46c2005-10-05 00:25:17 +02001215* Fix device partition intialization for SystemACE disks.
1216 Patch by Stephen Williams, 28 Apr 2005
1217
Wolfgang Denk99b0d282005-10-05 00:19:34 +02001218* Added support for KwikByte KB920x boards (based on AT91RM9200)
1219 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
1220
Wolfgang Denk45237bc2005-10-05 00:03:55 +02001221* Add support for S29GL064M-R3 flash chip on xsengine board
1222 Patch by Kurt Stremerch, 18 Apr 2005
1223
Wolfgang Denk7d314992005-10-05 00:00:54 +02001224* E500 update: repoint IVPR to RAM when code is relocated
1225 Patch by Kylo Ginsberg, 13 Apr 2005
1226
Wolfgang Denke5e98ed2005-10-04 23:38:07 +02001227* Fix loop end test in lib_generic/string.c:strswab()
1228 Patch by Andrew Dyer, October 10, 2005
1229 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
1230
Wolfgang Denk9b880bd2005-10-04 23:10:28 +02001231* Cleanup
1232
1233* Update ARM Integrator boards:
1234 Correct addessing errors in platform files.
1235 Split off common core module data from Integrator header files to
1236 include/armcoremodule.h.
1237 Patch by Peter Pearse, 04 Oct 2005
1238
Wolfgang Denk1820d4c2005-10-04 22:38:24 +02001239* Make sure only supported compiler options are used
1240 Import "cc-option" shell function from kernel and
1241 use it to get the correct ARM GCC options for individual CPUs
1242 Patch by Peter Pearse, 30 Jun 2005
1243
Stefan Roese9a8d82f2005-10-04 15:00:30 +02001244* Fix 440GR to print correct cpu revision
Wolfgang Denk9b880bd2005-10-04 23:10:28 +02001245 Patch by Stefan Roese, 04 Oct 2005
Stefan Roese9a8d82f2005-10-04 15:00:30 +02001246
Stefan Roese93b17ec2005-10-03 15:27:50 +02001247* Change board message on AMCC Yosemite & Yellowstone to common style
Wolfgang Denk9b880bd2005-10-04 23:10:28 +02001248 Patch by Stefan Roese, 03 Oct 2005
Stefan Roese93b17ec2005-10-03 15:27:50 +02001249
Wolfgang Denkd9631ec2005-09-30 15:18:23 +02001250* Fix compiler warning
1251
Wolfgang Denk709d8ec2005-09-29 12:16:38 +02001252* Fix FEC PHY addresses for TQM85xx boards
1253
Wolfgang Denke98f68b2005-09-28 01:49:47 +02001254* Fix uninitialized variable problem in hush shell
1255 Patch by Lars Rostock, 26 Sep 2005
1256
Wolfgang Denkfb34a9a2005-09-26 23:40:37 +02001257* Undo change of f6e20fc6ca... to include/configs/trab.h
1258 (Must have been an accident?)
1259
Wolfgang Denkd8e7e0f2005-09-26 01:26:56 +02001260* Add support for AT91RM9200 OHCI Controller.
1261 Patch by Eric Benard, 07 Apr 2005
1262
Wolfgang Denk98404642005-09-26 01:18:22 +02001263* Update ARM mach-types.h
1264 Patch by Eric Benard, 07 Apr 2005
1265
Wolfgang Denk0e4018d2005-09-26 01:14:38 +02001266* Add support for MP2USB board.
1267 Patch by Eric Benard, 07 Apr 2005
1268
Wolfgang Denkc570b2f2005-09-26 01:06:33 +02001269* Add board support for armadillo HT1070
1270 Patch by Rowel Atienza, 06 Apr 2005
1271
Wolfgang Denkc2d0ab42005-09-26 00:53:02 +02001272* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
1273 Patch by Vitaly Bordug, 30 Mar 2005
1274
Wolfgang Denke6f22282005-09-26 00:44:15 +02001275* Add iopset command on mpc8xx
1276 Patch by Daniel Eisenhut, 25 Mar 2005
1277
Wolfgang Denka9127332005-09-26 00:39:59 +02001278* Add support for MII in eepro100 driver.
1279 Patch by Gleb Natapov, 21 Mar 2005
1280
Wolfgang Denkf2af3eb2005-09-26 00:29:53 +02001281* Fixes to the Lubbock (PXA 25x) support:
1282 - Resolve the FIXME with respect to saving the u-boot environment.
1283 - Make the default load address land in real memory.
1284 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
1285 Patch by David Brownell, 10 Mar 2005
1286
Wolfgang Denk8e6f1a82005-09-25 18:59:36 +02001287* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
1288 Patch by Marc Leeman, 04 Mar 2005
1289
Wolfgang Denk49a75812005-09-25 18:41:04 +02001290* OMAP242x H4 board update
1291 - fix for ES2 differences.
1292 - switch to using the cfi_flash driver.
1293 - fix SRAM build address.
1294 - fix for GP device operation.
1295 - unlock SRAM for GP devices.
1296 - display more device information.
1297 - fix potential deadlock in omap24xx_i2c driver.
1298 - fix DLL load values to match dpllout*1 operation.
1299 - fix 2nd chip select init for combo DDR device.
1300 - add support for CFI Intel 28F256L18 on H4 board.
1301 Patch by Richard Woodruff, 03 Mar 2005
1302
Wolfgang Denk8e2be512005-09-25 17:14:20 +02001303* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
1304 Patch by Steven Scholz, 02 Mar 2005
1305
Wolfgang Denka188b582005-09-25 17:05:57 +02001306* Fix typo in eth.c
1307 Patch by Ara Avanesyan, 24 Feb 2005
1308
Wolfgang Denk31466292005-09-25 17:02:27 +02001309* Remove unneeded #include <malloc.h>
1310 Patch by Ladislav Michl, 22 Feb 2005
1311
Wolfgang Denkb66eb522005-09-25 16:59:36 +02001312* Add cramfs support for m68k
1313 Patch by Zachary Landau, 21 Feb 2005
1314
Wolfgang Denkbd516262005-09-25 16:56:15 +02001315* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
Wolfgang Denk716c1dc2005-09-25 18:49:35 +02001316 Patch by Jeff Angielski, 21 Feb 2005
1317
Wolfgang Denk7a22cd52005-09-25 16:50:33 +02001318* Fix au1x00_serial baud rate calculation:
1319 remove hardcoded cpu clock divisor and use register instead;
1320 round up instead of truncate
1321 Patch by Andrew Dyer, 15 Feb 2005
1322
Wolfgang Denk875c7892005-09-25 16:44:21 +02001323* Add Xilinx Spartan3 family FPGA support
Wolfgang Denk7a22cd52005-09-25 16:50:33 +02001324 Patch by Kurt Stremerch, 14 Feb 2005
Wolfgang Denk875c7892005-09-25 16:44:21 +02001325
Wolfgang Denkdb421e62005-09-25 16:41:22 +02001326* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
1327 Patch by Zachary Landau, 11 Feb 2005
1328
Wolfgang Denkc177bb52005-09-25 16:31:16 +02001329* Fix VOH405 Support
1330 Patch by Matthias Fuchs, 25 Sep 2005
1331
Wolfgang Denk1972dc02005-09-25 16:27:55 +02001332* Added support for PCI bridge on MPC8272ADS
1333 Patch by Vitaly Bordug, Feb 09 2005
1334
Wolfgang Denk0148e8c2005-09-25 16:22:14 +02001335* Update multicore CM9XX support for Integrator AP to allow booting from flash
1336 Patch by Jean-Paul Saman, 8 Feb 2005
1337
Wolfgang Denk389db1f2005-09-25 16:15:17 +02001338* Fix strswab() to reliably find end of string
1339 Patch by Andrew Dyer, 08 Feb 2005
1340
Wolfgang Denk6ed6ce62005-09-25 16:01:42 +02001341* Fix typos in include/ppc440.h
1342 Patch by Andrew E Mileski, 04 Feb 2005
1343
Wolfgang Denk2df741b2005-09-25 15:57:49 +02001344* Add Vibren (was Accelent) PXA255 IDP Support
1345 Patch by Cliff Brake, 04 Feb 2005
1346
Wolfgang Denkfd4bb672005-09-25 15:39:00 +02001347* Fix tools/bmp_logo.c using incorrect offset to pixel data
1348 Patch by Andrew Dyer, 31 Jan 2005
1349
Wolfgang Denk74f43042005-09-25 01:48:28 +02001350* Add ARM946E cpu and core module targets; remap memory to 0x00000000
1351 Patch by Peter Pearse, 2 Feb 2005
1352
Wolfgang Denke2146b62005-09-25 01:20:38 +02001353* Fix error handling in tools/env/fw_env.c
1354 Patch by Ara Avanesyan, 01 Feb 2005
1355
Wolfgang Denk9f221d02005-09-25 01:09:58 +02001356* Fix MGT5100 PSC baudrate calculation
1357 Patch by Sebastian Schau, 27 Jan 2005
1358
Wolfgang Denkc97a2aa2005-09-25 00:59:24 +02001359* OMAP242x fix for GP device booting
1360 - Add SRAM unlock for GP devices.
1361 - Change DDR DLL unlock value to allow DPLLout*1 operation.
1362 Patches by Richard Woodruff, 21 Jan 2005:
1363
Wolfgang Denk265817c2005-09-25 00:53:22 +02001364* Add support for AMD's Pb1x00 eval board;
1365 add MII routines to the au1x00 ethernet driver;
1366 add USB ohci driver (work in progress)
1367 Patch by Thomas Sailer, 20 Jan 2005
1368
Wolfgang Denkb63de2c2005-09-25 00:23:05 +02001369* Update omap5912osk board
1370 Use drivers/cfi_flash.c instead of private flash driver;
1371 Remove hardcoded personalized settings from omap5912osk.h;
1372 Fix spacing with (RO) marks in 'flinfo' output.
1373 Patch by Michael Bendzick, 14 Jan 2005
1374
Wolfgang Denk3706ba12005-09-25 00:00:45 +02001375* Fix warnings for PCI code on ixp
1376 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
1377
Wolfgang Denk9a9200b2005-09-24 23:41:00 +02001378* virtex2 fix for bogus download error messages
1379 The virtex2 FPGA download code watches for init going active during
1380 a download of config data as an error condition. init also goes
1381 active after a configuration is finished in concert with the done
1382 signal. So far, the code does not check for done active until all
1383 of the configuration data is sent. If configuration data has a few
1384 extra pad bytes at the end, this would cause an error message even
1385 though the download had suceeded.
1386 NOTE: virtex2 slave serial and spartan2 versions may still have the
1387 same problem.
1388 Patch by Andrew Dyer, 12 Jan 2005
1389
Wolfgang Denkdafbe372005-09-24 23:32:48 +02001390* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
1391 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
1392 message when probing for nonexistent flash in little endian mode.
1393 As a side effect more efficient and smaller code is generated,
1394 which is always a Good Thing (TM).
1395 Patch by Ladislav Michl, 24 Sep 2005
1396
Wolfgang Denk28cb9372005-09-24 23:25:46 +02001397* Update for TFTP using a fixed UDP port
1398 Use the approved environment variable names. Added "tftpdstp" to
1399 allow ports other than 69 per Tolunay Orkun's recommendation.
1400 Patch by Jerry Van Baren, 12 Jan 2005
1401
Wolfgang Denkecb0ccd2005-09-24 22:37:32 +02001402* Allow to force TFTP to use a fixed UDP port
1403 (Add a configuration option CONFIG_TFTP_PORT and optional env
1404 variable tftpport)
1405 Patch by Jerry Van Baren, 10 Jan 2005
1406
Wolfgang Denk4bc12f12005-09-24 22:05:40 +02001407* Fix ethernet timeouts on dbau1550 and other au1x00 systems
1408 Patch by Leif Lindholm, 29 Dec 2004
1409
Wolfgang Denk2b792af2005-09-24 21:54:50 +02001410* Cleanup: fix broken builds
1411
1412* Fix PHY address argument passing with mii info command
1413 Patch by Andrew Dyer, 28 Dec 2004
1414
Wolfgang Denk0c8721a2005-09-23 11:05:55 +02001415* Cleanup (PPC4xx is AMCC now)
1416
Stefan Roese7644f162005-09-22 09:16:57 +02001417* esd CPCI2DP board added
1418 Patch by Matthias Fuchs, 22 Sep 2005
1419
Stefan Roese026cb5d2005-09-22 09:07:15 +02001420* esd PMC405 board updated
1421 Patch by Matthias Fuchs, 22 Sep 2005
1422
Stefan Roese98f4a3d2005-09-22 09:04:17 +02001423* Add SM501 support to HH405 board.
1424 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
1425 Add support for eeprom write-enable (CFG_EEPROM_WREN).
1426 Patch by Stefan Roese, 22 Sep 2005
1427
Wolfgang Denk1caa7072005-09-22 09:34:17 +02001428* Fix autonegotiation in tsec ethernet driver
1429 Patch by Stefan Roese, 21 Sep 2005
1430
Wolfgang Denk8b4c9e72005-09-21 15:31:25 +02001431* Fix bug in auto_update (trab board)
1432 Patch by Martin Krause, 16 Sep 2005
1433
Wolfgang Denk59d80bf2005-09-21 15:24:52 +02001434* Fix computation of framebuffer palette for 8bpp LCD bitmaps
1435 Patch by Francesco Mandracci, 16 Sep 2005
1436
Wolfgang Denk1806c752005-09-21 10:07:56 +02001437* Update configuration for INKA4x0 board
1438
Wolfgang Denk29fe1c02005-09-21 09:59:55 +02001439* Update configuration for PM854 board
1440 Based on patch by R. Loeffl, 20 Jul 2005
1441
Stefan Roese053b40f2005-09-15 14:41:11 +02001442* Add PCI support to TQM8540 and TQM8560 boards
1443 Patch by Stefan Roese, 15 Sep 2005
1444
Stefan Roese34c0a5e2005-09-15 11:34:07 +02001445* Update AMCC Yosemite to get a consistent setup for all AMCC eval
1446 boards (baudrate, environment...). Flash driver fixed.
1447 Patch by Stefan Roese, 15 Sep 2005
1448
Stefan Roese4a3cd9e2005-09-07 16:21:12 +02001449* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
1450 ethernet port on ebony.
1451 Patch by Stefan Roese, 7 Sep 2005
1452
Marian Balakowicz7d454772005-09-11 15:27:12 +02001453* Added support for mtddevnum and mtddevname variables (mtdparts command)
1454
Wolfgang Denk670d9f12005-09-13 00:12:33 +02001455* Change default console baud rate for stxxtc board
1456
Stefan Roese9d2a8732005-08-31 12:55:50 +02001457* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Stefan Roese9d2a8732005-08-31 12:55:50 +02001458 Patch by Stefan Roese, 31 Aug 2005
1459
Wolfgang Denk80e238c2005-09-03 02:22:41 +02001460* Fix default command set (don't include CFG_CMD_DISPLAY command)
1461 Patch by Pantelis Antoniou, 02 Sep 2005
1462
Wolfgang Denk6d51e502005-09-03 01:58:35 +02001463* Cleanup
1464
Wolfgang Denk7b3e3c52005-09-03 01:23:25 +02001465* Enable SM712 driver support for HMI1001 board.
1466
Wolfgang Denk77f65802005-08-31 12:30:09 +02001467* Fix problems with ld version 2.16 (dot outside sections problem)
1468 Pointed out by Gerhard Jaeger, 31 Aug 2005;
1469 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
1470
1471* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
1472
1473* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
1474
1475* Add keyboard and dot matrix display support for HMI1001 board.
1476
1477* Prepare U-Boot for gcc-4.x
1478
Wolfgang Denk61dada82005-08-24 12:41:18 +02001479* Fixed Bamboo port to enable running without DDR-DIMM
1480 (Bamboo has also 64MB onboard DDR)
Stefan Roesea3e4fcb2005-08-24 11:21:36 +02001481 Patch by Stefan Roese, 24 Aug 2005
1482
Wolfgang Denka9fe9f42005-08-23 23:04:40 +02001483* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
1484 now handling all 4xx cpu's
1485 Patch by Stefan Roese, 16 Aug 2005
1486
Wolfgang Denk2ac47852005-08-23 22:29:44 +02001487* Fix make dependencies for at91rm9200 and ks8695 cpus
1488 Patch by Steven Scholz, 23 Aug 2005
1489
Wolfgang Denkd534f5c2005-08-23 22:27:41 +02001490* Add JFFS2 support for TQM5200 board
1491
Stefan Roese5e4b3362005-08-22 17:51:53 +02001492* Add esd cpci5200 and pf5200 boards
1493 Patch by Reinhard Arlt, 22 Aug 2005
1494
Wolfgang Denk94085692005-08-19 00:55:12 +02001495* Fix sysclock for TQM8540 and TQM8560 boards
1496 Patch by Martin Krause, 25 Jul 2005
1497
Wolfgang Denkc7db9a32005-08-19 00:53:02 +02001498* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
1499 Patch by Martin Krause, 08 Jun 2005
1500
Wolfgang Denk6617aae2005-08-19 00:46:54 +02001501* Add new board specific commands for TQM5200/STK52XX
1502 - Sound commands (beep, wav, sound)
1503 - Test commands (led, can, backlight, rs232)
1504 Patch by Martin Krause, 02 May 2005
1505
1506* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
Wolfgang Denkdf3c7c82005-08-19 00:36:45 +02001507 because of a bug in the AT91RM9200 CPU PLL
1508 Patch by Martin Krause, 22 Apr 2005
1509
Wolfgang Denk601aed12005-08-19 00:08:55 +02001510* Add automatic HW detection for another CMC_PU2 variant
1511 Patch by Martin Krause, 20 Apr 2005
1512
Wolfgang Denkdbc58192005-08-18 12:21:16 +02001513* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
1514 Patch by Martin Krause, 19 Apr 2005
1515
Wolfgang Denke8aa8242005-08-18 11:55:22 +02001516* Fix initialization problem on TQM5200 without SM501
Wolfgang Denk601aed12005-08-19 00:08:55 +02001517 Patch by Martin Krause, 08 Apr 2005
Wolfgang Denke8aa8242005-08-18 11:55:22 +02001518
Wolfgang Denk4f562f12005-08-18 11:51:12 +02001519* Add RTC support for STK52XX.200
Wolfgang Denk601aed12005-08-19 00:08:55 +02001520 Patch by Martin Krause, 07 Apr 2005
Wolfgang Denk4f562f12005-08-18 11:51:12 +02001521
Wolfgang Denkdf04a3d2005-08-18 01:22:22 +02001522* Add support for IFM o2dnt board
1523
Wolfgang Denk98128f32005-08-16 15:17:53 +02001524* Enable PCI on hmi1001 board
1525
Wolfgang Denk87b8bd52005-08-16 09:32:45 +02001526* Fix return values of the jffs2 commands ls/fsload/fsinfo,
1527 so we can use them to, e.g., check the existence of a file with
1528 "if ls foo; then this; else that; fi" in the hush shell
1529 Patch by Andreas Engel, 16 August 2005
1530
Wolfgang Denk3d078ce2005-08-15 16:03:56 +02001531* Coding style cleanup
1532
Wolfgang Denk6bdf4302005-08-15 15:55:00 +02001533* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
1534 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
1535
Stefan Roeseb79316f2005-08-15 12:31:23 +02001536* Check return value of malloc in 440gx_enet.c
1537 Patch by Travis B. Sawyer, 18 Jul 2005
1538
1539* Add Sandburst Metrobox and Sandburst Karef board support packages.
1540 Second serial port on 440GX now defined as a system device.
1541 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
1542 Patch by Travis B. Sawyer, 12 Jul 2005
1543
1544======================================================================
wdenka1191902005-01-09 17:12:27 +00001545Changes for U-Boot 1.1.3:
1546======================================================================
1547
Wolfgang Denkb2f50802005-08-12 23:43:12 +02001548* Minor code cleanup
1549
Wolfgang Denk50814842005-08-12 23:36:08 +02001550* Add forgotten new fils from latest VoiceBlue update
1551
Wolfgang Denk396387a2005-08-12 23:34:51 +02001552* Make bootretry feature work with hush shell.
1553 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
1554 Patch by Andreas Engel, 19 Jul 2005
1555
Wolfgang Denkd992daf2005-08-12 23:27:18 +02001556* Update Hymod Board Database PHP code in "tools" directory
1557 Patch by Murray Jensen, 01 Jul 2005
1558
Wolfgang Denkf9d77ed2005-08-12 23:23:46 +02001559* Make "tr" command use POSIX compliant; export HOSTOS make variable
1560 Patch by Murray Jensen, 30 Jun 2005
1561
Wolfgang Denkb3b0fd52005-08-12 23:20:59 +02001562* Fix Murray Jensen's mail address.
1563 Patch by Murray Jensen, 30 Jun 2005
1564
Wolfgang Denkf89920c2005-08-12 23:15:53 +02001565* Preserve PHY_BMCR during a soft reset.
1566 Patch by Carl Riechers, 24 Jun 2005
1567
Wolfgang Denke5445282005-08-12 22:56:51 +02001568* VoiceBlue update: eeprom tool can also store firmware version now.
1569 eeprom.bin is runable by jumping at load address.
1570 Patch by Ladislav Michl, 23 May 2005
1571
Wolfgang Denkea99a732005-08-12 22:38:37 +02001572* Move the AT91RM9200DK to the ARM Systems list.
1573 Patch by Anders Larsen, 26 Apr 2005
Wolfgang Denkb2f50802005-08-12 23:43:12 +02001574
Wolfgang Denk8d4ba3d2005-08-12 22:35:59 +02001575* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
1576 Patch by Anders Larsen, 26 Apr 2005
1577
Wolfgang Denk4d302d62005-08-12 22:32:29 +02001578* measure_gclk() is needed when DEBUG is enabled
1579 Patch by Bryan O'Donoghue, 25 Apr 2005
1580
Stefan Roese8534bf92005-08-12 20:06:52 +02001581* Add UPD-Checksum code, fix problem in net.c (return instead of break)
1582 Patch by Reinhard Arlt, 12 Aug 2005
1583
Stefan Roese5315dfa2005-08-12 16:56:56 +02001584* esd PCI405 board updated
1585 Patch by Matthias Fuchs, 28 Jul 2005
1586
Stefan Roese82f4c6a2005-08-12 16:52:47 +02001587* esd WUH405 and DU405 board updated
1588 Patch by Matthias Fuchs, 27 Jul 2005
1589
Stefan Roese9bcf2ab2005-08-12 16:46:35 +02001590* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
1591 Patch by Matthias Fuchs, 4 May 2005
1592
Stefan Roese84286382005-08-11 18:03:14 +02001593* Update AMCC Yosemite to get a consistent setup for all AMCC eval
1594 boards (baudrate, environment...). Flash driver fixed.
1595 Patch by Stefan Roese, 11 Aug 2005
1596
Stefan Roese9e005892005-08-11 17:58:40 +02001597* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
1598 Patch by Stefan Roese, 11 Aug 2005
1599
Stefan Roesec57c7982005-08-11 17:56:56 +02001600* Add NAND FLASH support for AMCC Bamboo 440EP eval board
1601 Patch by Stefan Roese, 11 Aug 2005
1602
Wolfgang Denk8f79e4c2005-08-10 15:14:32 +02001603* Add configuration for IFM AEV FIFO board.
1604 Minor coding style cleanup.
1605
1606* Add configuration for IFM SPI eval board
1607
Wolfgang Denk9d3338d2005-08-10 10:06:25 +02001608* Fix CompactFlash problem on HMI1001 board
1609
Wolfgang Denkc4e0e682005-08-09 21:41:20 +02001610* Make new "mtdparts" code build with older compilers
1611 Patch by Andrea Scian, 09 Aug 2005
1612
Stefan Roese846b0dd2005-08-08 12:42:22 +02001613* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
1614 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
1615 with the 405 defines and the linux kernel defines.
1616 Patch by Stefan Roese, 08 Aug 2005
1617
Wolfgang Denkc19c3132005-08-09 17:25:22 +02001618* Fix compiler warnings with older GCC versions
1619
Wolfgang Denk700a0c62005-08-08 01:03:24 +02001620* Add common (with Linux) MTD partition scheme and "mtdparts" command
1621
1622 Old, obsolete and duplicated code was cleaned up and replace by the
1623 new partitioning method. There are two possible approaches now:
1624
1625 The first one is to define a single, static partition:
1626
1627 #undef CONFIG_JFFS2_CMDLINE
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02001628 #define CONFIG_JFFS2_DEV "nor0"
1629 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
1630 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
1631 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
Wolfgang Denk700a0c62005-08-08 01:03:24 +02001632
1633 The second method uses the mtdparts command line option and dynamic
1634 partitioning:
1635
1636 /* mtdparts command line support */
1637 #define CONFIG_JFFS2_CMDLINE
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02001638 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
1639 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
Wolfgang Denk700a0c62005-08-08 01:03:24 +02001640
1641 Command line of course produces bigger images, and may be inappropriate
1642 for some targets, so by default it's off.
1643
Wolfgang Denk452e8e72005-08-08 00:47:14 +02001644* Fix build problems for PM856 Board
1645
Wolfgang Denk8b019da2005-08-08 00:14:41 +02001646* Fix sign extension bug in 'fpga loadb' command;
1647 make 'fpga loadb' always print the file header info
1648 Patch by Andrew Dyer, 11 Jan 2005
1649
Wolfgang Denkfe599e12005-08-07 23:55:50 +02001650* Fix errors that occur when accessing SystemACE CF
1651 Patch by Jeff Angielski, 09 Jan 2005
Stefan Roese846b0dd2005-08-08 12:42:22 +02001652
Wolfgang Denk7ebdb192005-08-06 02:11:33 +02001653* Document switching between U-Boot and PlanetCore on RPXlite
1654 by Sam Song, 24 Dec 2004
1655
Wolfgang Denkd980a162005-08-06 02:03:03 +02001656* Fix PowerQUICC II mask detection.
1657 Patch by Eugene Surovegin, 20 Dec 2004
Stefan Roese846b0dd2005-08-08 12:42:22 +02001658
Wolfgang Denkd06a5f72005-08-06 01:56:59 +02001659* Add support for Altera NIOS DK1C20 board
1660 Patch by Shlomo Kut, 13 Dec 2004
1661
Wolfgang Denkf901a832005-08-06 01:42:58 +02001662* Add support for ep8248 board
1663 Patch by Yuli Barcohen, 12 Dec 2004
1664
1665 Minor code cleanup.
1666
Wolfgang Denk56337962005-08-06 01:21:19 +02001667* Fix baudrate setting for KGDB on MPC8260
1668 Patch by HoJin, 11 Dec 2004
1669
Wolfgang Denk5ad73a82005-08-06 01:13:19 +02001670* Fix 'mii help' text formatting
1671 Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denkf901a832005-08-06 01:42:58 +02001672
Wolfgang Denk23a7a322005-08-06 01:11:12 +02001673* Fix return code of NFS command
1674 Patch by Hiroshi Ito, 11 Dec 2004
1675
Wolfgang Denk38362212005-08-06 01:02:27 +02001676* Fix typo
1677
Wolfgang Denkc04a76e2005-08-06 00:11:50 +02001678* Fix compiler warnings in cpu/ppc4xx/usbdev.c
1679 Patch by Steven Blakeslee, 04 Aug 2005
1680
Stefan Roese17f50f222005-08-04 17:09:16 +02001681* Add support for AMCC Bamboo PPC440EP eval board
1682 Patch by Stefan Roese, 04 Aug 2005
1683
Jon Loeligerde1d0a62005-08-01 13:20:47 -05001684* Patch by Jon Loeliger
1685 Fix style issues primarily in 85xx and 83xx boards.
1686 - C++ comments
1687 - Trailing white space
1688 - Indentation not by TAB
1689 - Excessive amount of empty lines
1690 - Trailing empty lines
1691
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +02001692* Patch by Ron Alder, 11 Jul 2005
Lunsheng Wangb0e32942005-07-29 10:20:29 -05001693 Add Xianghua Xiao and Lunsheng Wang's support for the
1694 GDA MPC8540 EVAL board.
1695
Eran Libertyf046ccd2005-07-28 10:08:46 -05001696* Patch by Eran Liberty
1697 Add support for the Freescale MPC8349ADS board.
1698
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +02001699* Patch by Jon Loeliger, 25 Jul 2005
Jon Loeliger63be1112005-07-25 15:38:06 -05001700 Move the TSEC driver out of cpu/mpc85xx as it will be shared
1701 by the upcoming mpc83xx family as well.
1702
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +02001703* Patch by Jon Loeliger, 05 May 2005
Jon Loeligerd9b94f22005-07-25 14:05:07 -05001704 Implemented support for MPC8548CDS board.
1705 Added DDR II support based on SPD values for MPC85xx boards.
1706 This roll-up patch also includes bugfies for the previously
1707 published patches:
1708 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
1709
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +02001710* Patch by Jon Loeliger, 10 Feb 2005
Jon Loeliger288693a2005-07-25 12:14:54 -05001711 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
1712
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +02001713* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
Jon Loeliger7202d432005-07-25 11:13:26 -05001714 For MPC85xxCDS:
1715 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
1716 for faster flash parts.
1717 Add documentation for BR/OR for FLASH.
1718
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +02001719* Patch by Jon Loeliger 08 Feb 2005
Jon Loeligerd65cfe82005-07-25 10:58:39 -05001720 Determine L2 Cache size dynamically on 85XX boards.
1721
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +02001722* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -05001723 - Convert the CPM2 based functionality to use new CONFIG_CPM2
1724 option rather than a myriad of CONFIG_MPC8560-like variants.
1725 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
1726 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
1727 new CONFIG_CPM2 option to each 8260 board.
wdenka1191902005-01-09 17:12:27 +00001728
Wolfgang Denkb20d0032005-08-05 12:19:30 +02001729* Add support for MicroSys PM856 board
1730 Patch by Josef Wagner, 03 Aug 2005
1731
Wolfgang Denk992b4022005-08-05 11:47:10 +02001732* Minor fixes to PM854 board
1733 Patch by Josef Wagner, 03 Aug 2005
1734
Wolfgang Denk452f6742005-08-04 19:45:01 +02001735* Adjust configuration of XENIAX board
1736 (chip select and GPIO required for USB operation)
1737
Wolfgang Denk3e0bc442005-08-04 01:24:19 +02001738* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
1739 routed to the Watchdog handler
1740 Patch by Eugene Surovegin, 18 Jun 2005
1741
Wolfgang Denkb20d0032005-08-05 12:19:30 +02001742* (re)enabled scsi commands do_scsi() and do_scsiboot()
Wolfgang Denk460c3222005-08-04 01:14:12 +02001743 Patch by Denis Peter, 06 Dec 2004
1744
Wolfgang Denkc43352c2005-08-04 01:09:44 +02001745* Fix endianess problem in TFTP / NFS default filenames
1746 Patch by Hiroshi Ito, 06 Dec 2004
1747
Wolfgang Denk6dfa4342005-08-03 23:03:54 +02001748* Ignore broadcast status bit in received frames in 8260 FCC ethernet
1749 loopback test code
1750 Patch by Murray Jensen, 18 Jul 2005
1751
Wolfgang Denk507d3b02005-08-03 22:58:55 +02001752* Fix typo in mkconfig script (used == instead of =)
1753 Patch by Murray Jensen, 18 Jul 2005
1754
Wolfgang Denkdc17fb62005-08-03 22:32:02 +02001755* Cleanup build problems on 64 bit build hosts
1756
Wolfgang Denkd3b86c42005-08-03 10:01:54 +02001757* Update MAINTAINERS file
1758
Stefan Roese8a316c92005-08-01 16:49:12 +02001759* Patch by Stefan Roese, 01 Aug 2005:
1760 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
1761 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
1762 for details.
1763 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
1764 to run on both 405GP and 405GPr eval boards).
1765
1766* Patch by Steven Blakeslee, 27 Jul 2005:
1767 - Add support for AMCC PPC440EP/GR.
1768 - Add support for AMCC Yosemite PPC440EP eval board.
1769 - Add support for AMCC Yellowstone PPC440GR eval board.
1770
Wolfgang Denk0f18cb62005-07-31 00:30:09 +02001771* Minor fixes for PPChameleon Board:
1772 - fix alignment of NAND size
1773 - make code do what the comment says
1774
Wolfgang Denkcf991922005-07-30 16:45:16 +02001775* Implement h/w sector protection status synchronization at boot.
1776 The code is provided for, and was tested on, the Yukon/Alaska
1777 and PM520 boards only.
1778
1779 A bug in flash_real_protect() for the Yukon board was fixed by
1780 adding a function that tells if two banks are on one flash chip.
1781
Wolfgang Denk15f36a52005-07-28 10:42:26 +02001782* Fix sysmon POST problem: check I2C error codes
1783 This fixes a problem of displaying bogus voltages when the voltages
1784 are so low that the I2C devices start failing while the rest of the
1785 system keeps running.
1786
Wolfgang Denke82bc622005-07-28 01:50:14 +02001787* Patch by Cedric Vincent, 6 Jul 2005:
1788 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
1789
Wolfgang Denk2d5df632005-07-21 16:14:36 +02001790* Patch by Jon Loeliger, 20 Jul 2005:
1791 Add missing PCI IO port definitions.
1792
Wolfgang Denk08abe152005-07-21 15:23:29 +02001793* Add CompactFlash support for HMI1001 board.
1794
1795* Adjust printed board ID for LWMON board.
1796
Wolfgang Denk1a794732005-07-21 15:29:22 +02001797* Fix low-level OHCI transfers for ARM920t and MPC5xxx
1798
Wolfgang Denkf5301872005-07-21 11:45:50 +02001799* Add new argument format for flash commands to allow for usage like
1800 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
1801 U-Boot will automaticially find the end of the corresponding sector.
1802
stroesecd5b2b92005-07-05 11:35:27 +00001803* Patch by Stefan Roese, 5 Jul 2005:
1804 Update uc100 board PHY setup
1805
stroese3c71f3e2005-07-01 15:53:57 +00001806* Patch by Stefan Roese, 1 Jul 2005:
1807 Fix PHY address for CATcenter board (now correct!)
1808
stroesebf418862005-06-30 13:06:07 +00001809* Patch by Stefan Roese, 30 Jun 2005:
1810 Fix PHY addresses for PPChameleon and CATcenter boards
1811 Change MAINTAINER for most esd boards
1812
wdenk88804d12005-07-04 00:03:16 +00001813* Patch by Detlev Zundel, 30 Jun 2005:
1814 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
1815
wdenk342717f2005-06-27 13:30:03 +00001816* Fix baudrate calculation problem on MPC5200 systems
1817
1818* Add EEPROM and RTC support for HMI1001 board
1819
1820* Patch by Detlev Zundel, 20 Jun 2005:
1821 Fix initialization of low active GPIO pins on inka4x0 board
1822
wdenk024447b2005-06-20 10:28:38 +00001823* Enable redundant environment, disable HW flash protection of
1824 HMI1001 board
1825
wdenkb2532ef2005-06-20 10:17:34 +00001826* Patch by Travis Sawyer, 10 Jun 2005:
1827 Initialize allocated dev and private hw structures
1828 after their respective allocation in 440gx_enet.c
1829
1830* Patch by Steven Scholz, 10 Jun 2005:
1831 Fix byteorder problems with second argument of "bootm" with
1832 standalone images;
1833
wdenka87589d2005-06-10 10:00:19 +00001834* Add support for HMI1001 board
1835
1836* Disable "date" and "sntp" commands on TQM866M
1837
wdenk51152c12005-06-05 20:30:43 +00001838* Fix watchdog reset problems on LWMON board
1839
wdenkba91e262005-05-30 23:55:42 +00001840* Patch by Juergen Selent, 17 May 2005:
1841 Add support for Funkwerk VoVPN gateway module.
1842
1843* Cleanup debug code for MPC8220 FEC driver
1844
wdenk2eab48f2005-05-23 10:49:50 +00001845* Extend burst mode RAM test program to take a loop count
1846 (0 = infinite)
1847
1848* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
1849 those boards that use it.
1850
wdenk3a574cb2005-05-19 22:39:42 +00001851* Patches by Greg Ungerer, 19 May 2005:
1852 - add support for the KS8695P (ARM 922 based) CPU
1853 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
1854
1855* Patch by Steven Scholz, 19 May 2005:
1856 Add support for CONFIG_SERIAL_TAG on ARM boards
1857
wdenk7680c142005-05-16 15:23:22 +00001858* Add PCI support for Sorcery board.
1859 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
1860
wdenkc0176632005-05-16 14:19:49 +00001861* Fix compile problems caused by new burst mode SDRAM test;
1862 make port pins to trigger logic analyzer configurable
1863
wdenk343117b2005-05-13 22:49:36 +00001864* Fix timer handling on MPC85xx systems
1865
wdenk9dd41a72005-05-12 22:48:09 +00001866* Fix debug code in omap5912osk flash driver
1867
1868* Add support for MPC8247 based "IDS8247" board.
1869
wdenkd44e14b2005-05-10 15:51:35 +00001870* Add support for 2 x TSEC interfaces on the TQM8540 board.
1871
wdenked16fef2005-05-09 10:17:32 +00001872* On LWMON we must use the watchdog to reset the board as the CPU
1873 genereated HRESET pulse is too short to reset the external
1874 circuitry.
1875
wdenk931da932005-05-07 19:06:32 +00001876* Add test tool to exercise SDRAM accesses in burst mode
1877 (as standalone program, MPC8xx/PowerPC only)
1878
wdenk60fc6cb2005-05-05 09:13:21 +00001879* Increase CFG_MONITOR_LEN for Rattler board to match actual code
1880 size.
1881
wdenk07cc0992005-05-05 00:04:14 +00001882* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenk412babe2005-05-05 09:51:44 +00001883 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
1884 added to support LZO and LZARI compression modes (undefined by
1885 default).
wdenk07cc0992005-05-05 00:04:14 +00001886
wdenkcf8bc572005-05-04 23:50:54 +00001887* Fix problem with symbolic links in JFFS2 code.
1888
wdenka710d4b2005-05-04 23:44:59 +00001889* Use linker ASSERT statement to prevent undetected overlapping of
1890 sections on PPChameleon board; other boards might use this, too.
1891
stroese434cf852005-05-03 06:19:57 +00001892* Patch by Stefan Roese, 03 May 2005:
1893 Update for P3G4
1894 Fix problems in cmd_universe.c
1895
1896* Patch by Matthias Fuchs, 03 May 2005:
1897 Added missing variable declaration in cmd_nand.c
1898 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
1899
wdenk9f709b62005-04-22 15:09:09 +00001900* Fix INKA4x0: use CS1 as gpio_wkup_6 output
1901
wdenka6310922005-04-21 21:10:22 +00001902* Fix bug in the SDRAM initialization code for canmb, IceCube and
1903 PM520 boards.
1904 Fix PHY address for canmb board.
1905
wdenk7cc14382005-04-20 14:38:59 +00001906* Cleanup serial console baudrate calculation on AT91RM9200;
1907 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenkec0ca732005-04-20 12:36:05 +00001908
stroesefddae7b2005-04-20 06:52:40 +00001909* Patch by Matthias Fuchs, 18 Apr 2005:
1910 Make PCI target address spaces on PMC405 and CPCI405 boards
1911 configurable via environment variables
1912
wdenkb2323ea2005-04-20 09:28:54 +00001913* Auto-size RAM on canmb board.
1914
wdenk5e5f9ed2005-04-13 23:15:10 +00001915* Add support for canmb board
1916
stroese4c2a3662005-04-13 10:08:39 +00001917* Patch by Stefan Roese, 13 Apr 2005:
1918 Update for esd apc405
1919
wdenk2a8af182005-04-13 10:02:42 +00001920* Fixes for TQM8560 board:
1921 - fix clock rates
1922 - remove debug messages
1923 - fix flash sector protection
1924
wdenkb77fad32005-04-07 22:36:40 +00001925* Patch by Steven Scholz, 07 Apr 2005:
1926 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
1927
wdenk2a8af182005-04-13 10:02:42 +00001928* Patches by Steven Scholz, 07 Apr 2005:
wdenkb77fad32005-04-07 22:36:40 +00001929 Fix compiler warning in altera.c
wdenk2a8af182005-04-13 10:02:42 +00001930 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenkb77fad32005-04-07 22:36:40 +00001931
1932* Patch by Ladislav Michl, 06 Apr 2005:
1933 Fix voiceblue configuration.
1934
stroese7ec25502005-04-07 05:35:12 +00001935* Patch by Stefan Roese, 06 Apr 2005:
1936 Updates for OCOTEA board:
1937 - Changed U-Boot size from 512kByte to 256kByte
1938 - Fixed flash driver to support boot from soldered user flash
1939 - Added README for switch from PIBS firmware to U-Boot
1940
1941* Patch by Travis Sawyer, 05 Apr 2005:
1942 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
1943 Problem found by Andrew Wozniak.
1944
wdenka85f9f22005-04-06 13:52:31 +00001945* Patch by Steven Scholz, 06 Apr 2005:
1946 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
1947 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
1948
wdenk20787e22005-04-06 00:04:16 +00001949* Patches by Robert Whaley, 29 Nov 2004:
1950 - update the pxa-regs.h file for PXA27x chips
1951 - add PXA27x based ADSVIX board
1952 - add support for MMC on PXA27x processors
1953
1954* Patch by Andrew E. Mileski, 28 Nov 2004:
1955 Fix PPC4xx SPD SDRAM detection bug
1956
1957* Patch by Hiroshi Ito, 26 Nov 2004:
1958 Fix logic of "test -z" and "test -n" commands
1959
wdenk3c2b3d42005-04-05 23:32:21 +00001960* Patch by Ladislav Michl, 05 Apr 2005:
1961 Add support for VoiceBlue board.
1962
1963* Patch by Ladislav Michl, 05 Apr 2005:
1964 Fix netboot_common() prototypes.
1965
wdenkb304c962005-04-05 22:30:50 +00001966* Patch by Steven Scholz, 05 Apr 2005:
1967 Use i.MX watchdog timer for reset_cpu()
1968
1969* Patch by Steven Scholz, 05 Apr 2005:
1970 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
1971 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
1972 (now in interupts.c)
1973
wdenk12b43d52005-04-05 21:57:18 +00001974* Add support for MPC8220 based "sorcery" board.
1975
1976* Add support for TQM8560 board.
wdenkf5c5ef42005-04-05 16:26:47 +00001977
wdenk3dd7f0f2005-04-04 23:43:44 +00001978* Add FEC support for TQM8540 board.
1979 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
1980
1981* Patch by Martin Krause, 04 Apr 2005:
1982 Update default configuration for CMC_PU2 board.
1983
wdenkba83a302005-04-04 12:23:03 +00001984* Patch by Steven Scholz, 04 Apr 2005:
wdenk8aa1a2d2005-04-04 12:44:11 +00001985 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
1986 - introduce two new configuration options instead:
1987 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
1988
1989* Patch by Steven Scholz, 04 Apr 2005:
wdenkba83a302005-04-04 12:23:03 +00001990 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
1991
wdenk101e8df2005-04-04 12:08:28 +00001992* Fix timer code for ARM systems: make sure that udelay() does not
1993 reset timers so it's save to use udelay() in timeout code.
1994
wdenk50712ba2005-04-03 23:35:57 +00001995* Patch by Mathias Küster, 23 Nov 2004:
1996 add udelay support for the mcf5282 cpu
1997
1998* Patch by Tolunay Orkun, 16 November 2004:
1999 fix incorrect onboard Xilinx CPLD base address
wdenk3c2b3d42005-04-05 23:32:21 +00002000
wdenk901787d2005-04-03 23:22:21 +00002001* Patch by Jerry Van Baren, 08 Nov 2004:
2002 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
2003 the jumper for the HRCW source should select flash. If lowboot is
2004 not selected, the jumper for the HRCW source should select the
2005 BCSR.
2006 - change default load base address to 0x00400000
2007
wdenk8b0bfc62005-04-03 23:11:38 +00002008* Patch by Yuli Barcohen, 08 Nov 2004:
2009 Add support for Analogue & Micro Rattler boards.
2010 Tested on Rattler8248.
2011
2012* Patch by Andre Renaud, 08 Nov 2004:
2013 Fix watchdog support in common/lcd.c
2014
2015* Patch by Marc Leeman, 05 Nov 2003:
2016 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
2017 bug only affects the XPC8245 processors
2018
wdenk384cc682005-04-03 22:35:21 +00002019* Patches by Josef Wagner, 29 Oct 2004:
2020 - Add support for MicroSys CPU87 board
2021 - Add support for MicroSys PM854 board
2022
2023* Patch by Jian Zhang, 02 Nov 2004:
2024 Add 16-bit NAND support
2025
wdenkc1a11c12005-04-03 21:11:16 +00002026* Patch by Scott McNutt, 01 Nov 2004:
2027 Add missing NIOS/NIOS2 support for "iminfo" command
2028
2029* Patch by Detlev Zundel, 29 Oct 2004:
2030 Add missing NIOS/NIOS2 support for "mkimage" tool.
2031
wdenk63153492005-04-03 20:55:38 +00002032* Patch by David Adair, 27 Oct 2004:
2033 Add missing 440GX SDRAM Controller reset
2034
wdenk3ec924a2005-04-03 17:23:39 +00002035* Patch by Steven Scholz, 25 Oct 2004:
2036 Declare reset_cpu() in include/common.h instead locally
2037
wdenk756f5862005-04-03 15:51:42 +00002038* Patch by Yusdi Santoso, 22 Oct 2004:
2039 - Add support for HIDDEN_DRAGON board
2040 - fix endianess problem in driver/rtl1839.c
2041
2042* Patch by Allen Curtis, 21 Oct 2004:
2043 support multiple serial ports
2044
wdenkb1bf6f22005-04-03 14:52:59 +00002045* Patch by Richard Klingler, 03 Apr 2005:
2046 Add call to eth_halt() in net/net.c when called functions fail
2047 after eth_init() has been called.
2048
2049* Patch by Sam Song, 3 April 2005:
2050 - Update README.Netconsole
2051 - Update README
2052
wdenk400558b2005-04-02 23:52:25 +00002053* Prepare for SoC rework of ARM code:
2054 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
2055 - rename memsetup into lowlevel_init (function name and source files)
wdenk86c98882005-04-03 14:26:46 +00002056 Patch by Steven Scholz, 03 Apr 2005:
2057 - create SoC specific directories include/asm-arm/arch-imx and
2058 include/asm-arm/arch-s3c24x0
wdenk400558b2005-04-02 23:52:25 +00002059
wdenk414eec32005-04-02 22:37:54 +00002060* Fix problems with SNTP support;
2061 enable SNTP support in some boards.
2062
wdenkbe6b6e42005-04-01 15:18:44 +00002063* Patches by Martin Krause, 01 Apr 2005:
2064 - Fix flash erase timeout on CMC_PU2
2065 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenke6ba3c92005-04-01 09:29:14 +00002066
wdenkf50cc092005-04-01 09:14:58 +00002067* Patch by Steven Scholz, 13 March 2005:
2068 fix cache enabling for AT91RM9200
2069
wdenkea287de2005-04-01 00:25:43 +00002070* Patch by Masami Komiya, 30 Mar 2005:
2071 add SNTP support and expand time server and time offset fields of
2072 DHCP support. See doc/README.SNTP
2073
2074* Patch by Steven Scholz, 13 Dec 2004:
2075 Fix bug in at91rm920 ethernet driver
2076
wdenkef2807c2005-03-31 23:44:33 +00002077* Patch by Steven Scholz, 13 Dec 2004:
2078 Remove duplicated code by merging memsetup.S files for
2079 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
2080
wdenk83e40ba2005-03-31 18:42:15 +00002081* Patch by Detlev Zundel, 31 Mar 2005:
2082 Cleanup duplicate definition of overwrite_console()
2083
2084* Update TQM5200 configuration;
2085 prepare for Rev. 200 starter kit boards
2086
wdenk0c1c117c2005-03-30 23:28:18 +00002087* Patch by Scott McNutt, 21 Oct 2004:
2088 Add support for Nios-II EPCS Controller core.
2089
2090* Patch by Scott McNutt, 20 Oct 2004:
2091 Nios-II cleanups:
2092 - Add sysid command (Nios-II only).
2093 - Locate default exception trampoline at proper offset.
2094 - Implement I/O routines (readb, writeb, etc)
2095 - Implement do_bootm_linux
2096
wdenk8f0b7cb2005-03-27 23:41:39 +00002097* Patches by Martin Krause, 22 Mar 2005:
2098 - use TQM5200_auto as MAKEALL target for TQM5200 systems
2099 - add support for SM501 graphics controller
2100 - add support for graphic console on TQM5200
2101 - add support for TQM5200 Rev 200
2102 - cleanup, fix typo in include/configs/TQM5200.h
2103
wdenk256d31c2005-03-20 22:33:46 +00002104* Patch by Manfred Baral, 17 Mar 2005:
2105 Fix typo
2106
wdenke6325152005-03-17 16:43:10 +00002107* Fix RTC configuration for PPChameleon board
2108
2109* Cleanup, fix typo in include/configs/TQM5200.h
2110
stroeseacdcd102005-03-16 20:58:31 +00002111* Patch by Stefan Roese, 16 Mar 2005:
2112 Update for esd auto_update and hh405 board
2113
wdenk89c02e22005-03-16 16:32:26 +00002114* Adapt for U-Boot image size (new features enabled) on TQM5200
2115
wdenk6c9e7892005-03-15 22:56:53 +00002116* Update code for TQM8540 board (and 85xx in general):
2117 - Change the name of the Ethernet driver: MOTO ENET -> ENET
2118 - Reformat boot messages
2119 - Enable redundant environment
2120 - Replace the -O2 optimization flag with -mno-string
2121
wdenk9d46ea42005-03-14 23:56:42 +00002122* Patch by David Brownell, 10 Mar 2005:
2123 Restore copyright statements in OHCI drivers.
2124
2125* Add support for TQM8540 board
2126
wdenkc3fafec2005-03-14 23:01:03 +00002127* Patch by Detlev Zundel, 14 Mar 2005:
2128 NC650: changed NAND flash addressing to using UPMB
2129
2130* Patch by Stefan Roese, 14 Mar 2005:
stroesee9684a52005-03-14 12:56:21 +00002131 Update for esd voh405 fpga image
2132
wdenka0bdf492005-03-14 13:14:58 +00002133* INKA4x0: Allow initialization of LCD backlight dimming from
2134 "brightness" environment variable.
2135
wdenkf4733a02005-03-06 01:21:30 +00002136* Add port initialization for digital I/O on INKA4x0
2137
wdenkc3fafec2005-03-14 23:01:03 +00002138* Patch by Stefan Roese, 01 Mar 2005:
stroese47b1e3d2005-03-01 17:26:39 +00002139 Update for esd boards dp405 and hub405
2140
wdenkb05dcb52005-03-04 11:27:31 +00002141* Fix get_partition_info() parameter error in all other calls
2142 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
2143
2144* Enable USB and IDE support for INKA4x0 board
2145
wdenkc3fafec2005-03-14 23:01:03 +00002146* Patch by Andrew Dyer, 28 Feb 2005:
wdenkb05dcb52005-03-04 11:27:31 +00002147 fix ext2load passing an incorrect pointer to get_partition_info()
2148 resulting in load failure for devices other than 0
2149
wdenke58cf2a2005-02-27 23:46:58 +00002150* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
2151
wdenk1968e612005-02-24 23:23:29 +00002152* Cleanup USB and partition defines
2153
wdenk151ab832005-02-24 22:44:16 +00002154* Add support for ext2 filesystems and image timestamps to TQM5200 board
2155
2156* Add reset code for Coral-P on INKA4x0 board
2157
2158* Patch by Martin Krause, 28 Jun 2004:
2159 Update for TRAB board.
2160
2161* Fix some missing "volatile"s in MPC5xxx FEC driver
2162
wdenke799d372005-02-07 19:44:17 +00002163* Fix cirrus voltage detection (for CPC45)
2164
wdenkf8883cb2005-02-04 15:38:08 +00002165* Fix byteorder problem in usbboot and scsiboot commands.
2166
wdenk20a80412005-02-04 15:02:06 +00002167* Patch by Cajus Hahn, 04 Feb 2005:
2168 - don't insist on leading '/' for filename in ext2load
2169 - set default partition to useful value (1) in ext2load
2170
2171* Patch by Andrew Dyer, 08 Jan 2005:
2172 fix wrong return codes in ext2 code
2173
wdenk1a344f22005-02-03 23:00:49 +00002174* Removed '--no-warn-mismatch' option from Makefile. This option
2175 makes 'ld' to overlook binary objects compatibility.
2176
2177* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
2178 --end-group) outside of the group. This will make 'ld' to do
2179 _multiple_ search in the library group when resolving symbol
2180 references and do only a _single_ seach in libgcc.a after the group
2181 search.
2182
2183* Fix stability problems on CPC45 board again.
2184
2185* Make image detection for diskboot / usbboot / scsiboot more robust
2186 (also check header checksum)
2187
wdenk436be292005-01-31 22:09:11 +00002188* Update CPC45 board configuration.
2189
2190* Add USB and PCI support for INKA4x0 board
2191
wdenkcd172b72005-01-22 18:26:04 +00002192* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
2193
wdenkc3d2b4b2005-01-22 18:13:04 +00002194* Code cleanup
2195
wdenk5a95f6f2005-01-12 00:38:03 +00002196* Patch by Robin Getz, 13 Oct 2004:
2197 Add standalone application to change SMC91C111 MAC addresses,
2198 see examples/README.smc91111_eeprom
2199
2200* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
2201 Fix Flash support for ARM Integrator CP.
2202
wdenk289f9322005-01-12 00:15:14 +00002203* Patch by Richard Woodruff, 10 Jan 2005:
2204 Update support for OMAP2420 (ARM11) and H4 board:
2205 o clean up and add new types to H4 memory probe code.
2206 o fix to work with internal boot.
2207 o added PRCM config III operation.
2208 o fix marginal flash timings.
2209 o add revison ATAG usage.
2210 o enable voltage scaling at power chip.
2211 o fix compile error for i2c.
2212
2213* Fix network problem (error when receiving multiple ARP packets)
2214
2215* Patch by Daniel Poirot, 12 Oct 2004:
wdenk652a10c2005-01-09 23:48:14 +00002216 Add support for Wind River sbc405 board
2217
2218* Patch by Rainer Brestan, 12 Oct 2004:
2219 Make examples/Makefile more robust
2220
wdenk6225c5d2005-01-09 23:33:49 +00002221* Patch by Sam Song, 11 October 2004:
2222 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
2223 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
2224 less than 50MHz
2225
2226* Patch by Sam Song, 10 Oct 2004:
2227 Fix a parameter error in run_command() in main.c
2228
2229* Patch by Richard Woodruff, 01 Oct 2004:
wdenk8ed96042005-01-09 23:16:25 +00002230 add support for the TI OMAP2420 processor and its H4 reference
2231 board
2232
2233* Patch by Christian Pellegrin, 24 Sep 2004:
2234 Added support for NE2000 compatible (DP8390, DP83902) NICs.
2235
wdenkff36fd82005-01-09 22:28:56 +00002236* Patch by Leif Lindholm, 23 Sep 2004:
2237 add support for the AMD db1550 board
2238
2239* Patch by Travis Sawyer, 15 Sep 2004:
2240 Add CONFIG_SERIAL_MULTI support for ppc4xx,
2241 update README.serial_multi
2242
wdenk6310eb92005-01-09 21:28:15 +00002243* Patches by David Snowdon, 07 Sep 2004:
2244 - add u-boot.hex target in the top level Makefile
2245 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
2246 - use -mtune=xscale and -march=armv5 options for PXA
2247
wdenka562e1b2005-01-09 18:21:42 +00002248* Patch by Florian Schlote, 08 Sep 2004:
Wolfgang Denk4af099b2006-05-09 13:49:12 +02002249 Add support for SenTec-COBRA5272-board (ColdFire).
wdenka562e1b2005-01-09 18:21:42 +00002250
wdenk30ce5ab2005-01-09 18:12:51 +00002251* Patch by Gleb Natapov, 07 Sep 2004:
2252 mpc824x: set PCI latency timer to a sane value
2253 (is 0 after reset).
2254
2255* Patch by Kurt Stremerch, 03 Sep 2004:
2256 Add bitstream configuration option for fpga command (Xilinx only).
2257
wdenk9dd611b2005-01-09 17:19:34 +00002258* Patch by Kurt Stremerch, 03 Sep 2004:
2259 Add Xilinx Spartan2E family FPGA support
2260
2261* Patch by Jeff Angielski, 02 Sep 2004:
2262 Add Added support for H2 revision of the EP8260 board.
2263 Fixed formatting for some of the EP8260 related source files.
2264
wdenka1191902005-01-09 17:12:27 +00002265* Patch by Jon Loeliger, 02 Sep 2004:
2266 Reset monitor size back to 256 so environment can be written
2267 to flash on MPC85xx ADS and CDS releases.
2268
2269* Patch by Paolo Broggini, 02 Sep 2004:
2270 Make BSS clearing on ARM systems more robust
2271
2272* Patch by Yue Hu and Joe, 01 Sep 2004:
2273 - add PCI support for ixp425;
2274 - add EEPRO100 suppor tfor ixdp425 board.
2275
2276* Fix problem with protected sector detection in driver/cfi_flash.c
2277
2278======================================================================
wdenk15c7a8e2005-01-02 17:02:54 +00002279Changes for U-Boot 1.1.2:
wdenk2729af92004-05-03 20:45:30 +00002280======================================================================
2281
wdenke2ffd592004-12-31 09:32:47 +00002282* Code cleanup, mostly for GCC-3.3.x
2283
2284* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
2285 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
2286 additional ethernet addresses.
2287
2288* Cleanup drivers/i82365.c - avoid duplication of code
2289
2290* Fix bogus "cannot span across banks" flash error message
2291
2292* Code cleanup
2293
2294* Add support for CompactFlash for the CPC45 Board.
2295
wdenk08f27272004-12-19 21:39:27 +00002296* Fix problems with CMC_PU2 flash driver.
2297
wdenkec0aee72004-12-19 09:58:11 +00002298* Cleanup:
2299 - avoid trigraph warning in fs/ext2/ext2fs.c
2300 - rename UC100 -> uc100
2301
wdenkf7d15722004-12-18 22:35:43 +00002302* Add support for UC100 board
2303
stroese8cba19072004-12-16 18:47:58 +00002304* Patch by Stefan Roese, 16 Dez 2004:
2305 - ext2fs support added
2306 - Tundra universe support added
Wolfgang Denk4af099b2006-05-09 13:49:12 +02002307 - ColdFire MCF5249 support added (no preloader needed!)
stroese8cba19072004-12-16 18:47:58 +00002308 - MCF5249 board TASREG added
2309 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
2310 VOM405, WUH405
2311 - some esd boards updated
2312 - memory commands "mdc" and "mwc" added for cyclic read/write
2313 (CONFIG_MX_CYCLIC, see README for further description)
2314
wdenk138ff602004-12-16 15:52:40 +00002315* Add support for INKA4X0 board
2316
wdenk689aec12004-12-13 00:18:44 +00002317* Patch by Steven Scholz, 12 Dec 2004:
2318 Fix typo in AT91 memory setup.
2319
wdenk7e6bf352004-12-12 22:06:17 +00002320* Patch by Martin Krause, 27 Oct 2004:
2321 - add support for "STK52xx" board (including PS/2 multiplexer)
2322 - add hardware detection for TQM5200
2323
wdenk25d67122004-12-10 11:40:40 +00002324* Clean up CMC PU2 flash driver
2325
2326* Update MAINTAINERS file
2327
2328* Fix bug in MPC823 LCD driver
2329
wdenked54e622004-11-24 23:35:19 +00002330* Fix udelay() on AT91RM9200 for delays < 1 ms.
2331
2332* Enable long help on CMC PU2 board;
2333 fix reset issue;
2334 increase CPU speed from 179 to 207 MHz.
2335
wdenkbb310d42004-11-22 22:20:07 +00002336* Fix smc91111 ethernet driver for Xaeniax board (need to handle
2337 unaligned tail part specially).
2338
wdenk9d5028c2004-11-21 00:06:33 +00002339* Update for AT91RM9200DK and CMC_PU2 boards:
2340 - Enable booting directly from flash
2341 - fix CMC_PU2 flash driver
2342
2343* Fix mkimage usage message
2344
wdenkcacfab52004-11-17 20:44:20 +00002345* Map SRAM on NC650 board
2346
wdenk1f6d4252004-11-02 13:00:33 +00002347* Work around for Ethernet problems on Xaeniax board
2348
wdenk983fda82004-10-28 00:09:35 +00002349* Patch by TsiChung Liew, 23 Sep 2004:
2350 - add support for MPC8220 CPU
2351 - Add support for Alaska and Yukon boards
2352
wdenke3c9b9f2004-10-24 23:54:40 +00002353* Fix configuration for ERIC board (needs more room)
2354
2355* Adjust MIPS compiler options at run-time depending on tools version
2356 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
2357 "-mcpu=4kc" for old tools)
2358
wdenk14699a22004-10-19 22:17:51 +00002359* Add passing of the command line and memory size information to the
2360 kernel on xaeniax board.
2361
wdenk4cfaf552004-10-11 23:03:10 +00002362* Enable NAND flash support for NC650 board.
2363
2364* Patch by Thomas Lange 07 Oct 2004:
2365 Updated README for DBAu1x00 boards to match current status
2366
wdenkd407bf52004-10-11 22:51:13 +00002367* Patch by Philippe Robin, 28 Sept 2004:
2368 Fix Flash support for Versatile.
2369
2370* Patch by Roger Blofeld, 16 Sep 2004:
2371 Fix timeout for DHCP command retry
2372
wdenk2ee66532004-10-11 22:43:02 +00002373* Patch by Pantelis Antoniou, 14 Sep 2004:
2374 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
2375
2376* Patch by Pantelis Antoniou, 14 Sep 2004:
2377 Kick watchdog when bz-decompressing
2378
wdenk9455b7f2004-10-11 22:25:49 +00002379* Fix CFG_HZ problems on AT91RM9200 systems
2380 [Remember: CFG_HZ should be 1000 on ALL systems!]
2381
wdenke1599e82004-10-10 23:27:33 +00002382* Patch by Gridish Shlomi, 30 Aug 2004:
2383 - Add support to revA version of PQ27 and PQ27E.
2384 - Reverted MPC8260ADS baudrate back to original 115200
2385
2386* Patch by Hojin, 17 Sep 2004:
2387 Fix typo in cfi_flash.c
wdenk8b74bf32004-10-11 23:10:30 +00002388
wdenke1599e82004-10-10 23:27:33 +00002389* Patch by Mark Jonas, 09 September 2004:
2390 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
2391 error message
2392
2393* Patch by Mark Jonas, 31 August 2004:
2394 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
2395 improves FTP performance for MPC5200 systems. Enabled for IceCube
2396 by default.
2397
wdenkc15f3122004-10-10 22:44:24 +00002398* Patch by Michael Bendzick, 30 Aug 2004:
2399 - Improve platform.S code for omap1510inn that detects whether code
2400 is running from SDRAM or not. Patch allows SDRAM to be configured
2401 if code is running out of SRAM at 0x20000000.
2402
2403* Patch by Frederick Klatt, 30 Aug 2004:
2404 Add support for the Wind River SBC8540/SBC8560 boards
2405
wdenk656658d2004-10-10 22:16:06 +00002406* Configure SX1 board to use drivers/cfi_flash.c
2407
2408* Patches by Michael Bendzick, 30 Aug 2004:
2409 - Configure omap1510inn board to use drivers/cfi_flash.c
2410 - Make drivers/cfi_flash.c protect environment and redundant
2411 environment.
2412
2413* Patch by Steven Scholz, 23 Jun 2004:
2414 - Add script (tools/img2brec.sh) to programm U-Boot into
2415 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
2416
wdenk5c952cf2004-10-10 21:27:30 +00002417* Patches by Scott McNutt, 24 Aug 2004:
2418 - Add support for Altera Nios-II processors.
2419 - Add support for Psyent PCI-5441 board.
2420 - Add support for Psyent PK1C20 board.
2421
wdenk03f5c552004-10-10 21:21:55 +00002422* Patches by Jon Loeliger, 24 Aug 2004:
2423 - Add support for the MPC8541 and MPC8555 CDS boards
2424 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
2425 - Convert MPC85xxADS to use common CFI flash driver
wdenkcf336782004-10-10 20:23:57 +00002426 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
2427 from board_early_init_f()
2428 - Provide SW workaround for PCI initialization on 85xx CDS
wdenkcf336782004-10-10 20:23:57 +00002429
wdenk08b6aa62004-10-10 18:49:14 +00002430* Patches by George G. Davis, 24 Aug 2004:
2431 - Enable ramdisk/initrd tagged param support for omap1610h2_config
2432 - Remove static network setup defaults from mx1ads_config
wdenk731215e2004-10-10 18:41:04 +00002433 - update ARM boards to use constants from mach-types.h
2434
wdenkb6508512004-10-10 18:03:33 +00002435* Patch by Gary Jennejohn, 04 Oct 2004:
2436 - fix I2C on at91rm9200
2437 - add support for Ricoh RS5C372A RTC
2438
wdenk2cbe5712004-10-10 17:05:18 +00002439* Patch by Gary Jennejohn, 01 Oct 2004:
2440 - add support for CMC PU2 board
2441 - add support for I2C on at91rm9200
2442
2443* Patch by Gary Jennejohn, 28 Sep 2004:
2444 fix baudrate handling on at91rm9200
2445
wdenk659883c2004-10-09 23:33:42 +00002446* Patch by Yuli Barcohen, 22 Aug 2004:
2447 - remove ZPC.1900 board-specific flash driver;
2448 switch the port to generic CFI driver;
2449 - port clean-up
2450
wdenkf325e182004-10-09 23:28:40 +00002451* Patch by Hinko Kocevar, 21 Aug 2004:
2452 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
2453
wdenk8655b6f2004-10-09 23:25:58 +00002454* Clean up tools/bmp_logo.c to not add trailing white space
2455
2456* Patch by Hinko Kocevar, 21 Aug 2004:
2457 - Group common framebuffer functions in common/lcd.c
2458 - Group common framebuffer macros and #defines in include/lcd.h
2459 - Provide calc_fbsize() for video ATAG
2460
wdenk30d56fa2004-10-09 22:44:59 +00002461* Patch by Sam Song, 21 August 2004:
2462 - Fix a typo in README
2463 - Align "(RO)" output for "flinfo" after "protect on"
2464 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
2465 ratio 1:1 when core frequency less than 50MHz
2466
wdenk8655b6f2004-10-09 23:25:58 +00002467* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk63cfcbb2004-10-09 22:32:26 +00002468 - fix some "use of label at end of compound statement" warnings
2469 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
2470
wdenk1d9f4102004-10-09 22:21:29 +00002471* Patch by Steven Scholz, 16 Aug 2004:
2472 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
2473 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
2474 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
2475 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
2476 into cpu/arm920t/$(SOC)/
2477
wdenka5bbcc32004-09-29 22:55:14 +00002478* Patches by Sean Chang, 09 Aug 2004:
2479 - Added support for both 8 and 16 bit mode access to System ACE CF
2480 through MPU.
2481 - Fixed missing System ACE CF device during get FAT partition info
2482 in fat_register_device function.
2483 - Enabled System ACE CF support on ML300.
2484
2485* Patch by Sean Chang, 09 Aug 2004:
2486 Synch defines for saveenv and do_saveenv functions so they get
2487 compiled under the same statement.
2488
2489* Patch by Sean Chang, 09 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00002490 - Added I2C support for ML300.
2491 - Added support for ML300 to read out its environment information
2492 stored on the EEPROM.
2493 - Added support to use board specific parameters as part of
2494 U-Boot's environment information.
2495 - Updated MLD files to support configuration for new features
2496 above.
2497
wdenka5bbcc32004-09-29 22:55:14 +00002498* Patches by Travis Sawyer, 05 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00002499 - Remove incorrect bridge settings for eth group 6
2500 - Add call to setup bridge in ppc_440x_eth_initialize
2501 - Fix ppc_440x_eth_init to reset the phy only if its the
2502 first time through, otherwise, just check the phy for the
2503 autonegotiated speed/duplex. This allows the use of netconsole
2504 - only print the speed/duplex the first time the phy is reset.
2505
wdenkda93ed82004-09-29 11:02:56 +00002506* Patch by Shlomo Kut, 29 Mar 2004:
2507 Add support for MKS Instruments "Quantum" board
2508
2509* Fix build problem with Cogent boards;
2510 avoid using <asm/byteorder.h> when using the host compiler
2511
wdenka5725fa2004-09-28 21:51:42 +00002512* Patch by Ganapathi C, 04 Aug 2004:
2513 Fix NFS timeout issue
2514
wdenke1a3f6b2004-09-28 21:39:45 +00002515* Patch by Yuli Barcohen, 19 Jul 2004:
2516 - Fix host tools building in Cygwin environment
2517 - Fix header files search order for host tools
2518
2519* Patch by Tom Armistead, 19 Jul 2004:
2520 Fix kgdb.S support for 74xx_75x cpu
2521
wdenkc65fdc72004-09-28 21:26:26 +00002522* Patch by Jon Loeliger, 15 Jul 2004:
2523 Fix MPC85xx I2C driver
2524
wdenk64f70be2004-09-28 20:34:50 +00002525* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
2526
wdenkcce625e2004-09-28 19:00:19 +00002527* Patch by Stephen Williams, 15 July 2004
2528 Set the PCI class code for JSE board as part of PCI interface setup
2529
2530* Patch by Michael Bendzick, 15 Jul 2004:
2531 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
2532 CFG_FLASH_USE_BUFFER_WRITE is set
2533
wdenk66ca92a2004-09-28 17:59:53 +00002534* Patch by Yuli Barcohen, 13 Jul 2004:
2535 Allow clock setting on MPC866/MPC885 series chips according to
2536 environment variable `cpuclk'
2537
2538* Patch by Yuli Barcohen, 20 Apr 2004:
2539 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
2540
wdenk4ec3a7f2004-09-28 16:44:41 +00002541* Patch by Vincent Dubey, 24 Sep 2004:
2542 Add support for xaeniax board
2543
wdenk79536a62004-09-27 20:20:11 +00002544* Add comment about non-GPL character of standalone applications to
2545 COPYING file
2546
2547* Fix FEC ethernet problem on NSCU board.
2548
wdenk4734cb72004-09-21 23:33:32 +00002549* Patch by Gary Jennejohn, 09 Sep 2004:
2550 allow to use USART1 as console port on at91rm9200dk boards
2551
stroesec3548392004-09-16 12:37:13 +00002552* Patch by Stefan Roese, 16 Sep 2004:
2553 Update AR405 board.
2554
wdenk1d6f9722004-09-09 17:44:35 +00002555* Fix SysClk handling for PPChameleon and CATcenter boards
2556
wdenkeedcd072004-09-08 22:03:11 +00002557* Patch by Detlev Zundel, 08 Sep 2004:
2558 Update etags build target
2559
2560* Improve NetConsole support: add support for broadcast destination
2561 address and buffered input.
2562
2563* Cleanup compiler warnings for GCC 3.3.x and later
2564
2565* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
2566
wdenk7ca202f2004-08-28 22:45:57 +00002567* Add support for IDS "NC650" board
2568
wdenk31a64922004-08-28 21:09:14 +00002569* Add automatic update support for LWMON board
2570
2571* Clear Block Lock-Bits when erasing flash on LWMON board.
2572
2573* Fix return code of "fatload" command
2574
2575* Enable MSDOS/VFAT filesystem support for LWMON board
2576
wdenk89394042004-08-04 21:56:49 +00002577* Patch by Martin Krause, 03 Aug 2004:
2578 change timing for SM501 graphics controller on TQM5200 module
2579
2580* Patch by Mark Jonas, 13 July 2004:
2581 - Total5200 LCD now run in little endian mode. Endianess conversion
2582 is done in hardware.
wdenk7ca202f2004-08-28 22:45:57 +00002583 - Removed last reference to "console" environment variable.
wdenk89394042004-08-04 21:56:49 +00002584
wdenk429168e2004-08-02 23:39:03 +00002585* Patches by Lars Munch, 12 Jul 2004:
2586 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
2587 board specific
2588 - split out the LXT971A PHY from ns_9750_eth.h
2589 - split the dm9161 phy part out of at91rm9200_ether.c
2590
wdenk6705d812004-08-02 23:22:59 +00002591* Patch by Andreas Engel, 12 Jul 2004:
2592 Replaced hardcoded PL011 clock frequency with config variable.
2593 Fixed wrong CONFIG_CMD_DFL doc.
2594
2595* Patch by Thomas Viehweger, 09 Jun 2004:
2596 make it possible to remove chpart when there is only one partition
2597
wdenk68ceb292004-08-02 21:11:11 +00002598* Add support for console over UDP (compatible to Ingo Molnar's
2599 netconsole patch under Linux)
2600
wdenk9aea9532004-08-01 23:02:45 +00002601* Patch by Jon Loeliger, 16 Jul 2004:
2602 - support larger DDR memories up to 2G on the PC8540/8560ADS and
2603 STXGP3 boards
2604 - Made MPC8540/8560ADS be 33Mhz PCI by default.
2605 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
2606 and CONFIG_L2_INIT_RAM options.
2607 - Refactor Local Bus initialization out of SDRAM setup.
2608 - Re-implement new version of LBC11/DDR11 errata workarounds.
2609 - Moved board specific PCI init parts out of CPU directory.
2610 - Added TLB entry for PCI-1 IO Memory
2611 - Updated README.mpc85xxads
2612
wdenk281e00a2004-08-01 22:48:16 +00002613* Patch by Sascha Hauer, 28 Jun:
2614 - add generic support for Motorola i.MX architecture
2615 - add support for mx1ads, mx1fs2 and scb9328 boards
2616
2617* Patches by Marc Leeman, 23 Jul 2004:
2618 - Add define for the PCI/Memory Buffer Configuration Register
2619 - corrected comments in cpu/mpc824x/cpu_init.c
2620
2621* Add support for multiple serial interfaces
2622 (for example to allow modem dial-in / dial-out)
2623
stroese45eeb892004-07-15 14:41:43 +00002624* Patch by Stefan Roese, 15 Jul 2004:
2625 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
2626
wdenkcfca5e62004-08-01 13:09:47 +00002627* Fix NSCU config; add ethernet wakeup code.
2628
Wolfgang Denk4af099b2006-05-09 13:49:12 +02002629* Add link for preloader for Motorola ColdFire to README.m68k
wdenkcfca5e62004-08-01 13:09:47 +00002630
wdenk75b1fa72004-07-12 22:34:51 +00002631* Patch by Michael Bendzick, 12 Jul 2004:
2632 fix output formatting in drivers/cfi_flash.c
2633
wdenk07cba352004-07-12 14:37:59 +00002634* Patch by Mark Jonas, 02 Jul 2004:
2635 Fix lowboot (again) on MPC5xxx
2636
wdenkcdc7fea2004-07-11 22:27:55 +00002637* Patch by Curt Brune, 07 Jul 2004:
2638 relocate exception vectors on arm720t if needed
2639
wdenka1f4a3d2004-07-11 22:19:26 +00002640* Patch by George G. Davis, 06 Jul 2004:
2641 - update mach-types.h to latest arm.linux.org.uk master list
2642 - Set correct OMAP1610 bi_arch_number for build target
2643
2644* Patch by Curt Brune, 06 Jul 2004:
2645 evb4510: add support for timer interrupt; cleanup
2646
wdenkb9283e22004-07-11 21:49:42 +00002647* Patch by Dan Poirot, 06 Jul 2004:
2648 Fix sbc8260 environment variables
2649
2650* Cleanup redundand "console" environment variable
2651
wdenk81050922004-07-11 20:04:51 +00002652* Patch by Mark Jonas, 05 Jul 2004:
2653 add support for the Total5100's and Total5200's LCD screen
2654
2655* Patches by Dan Eisenhut, 01 Jul 2004:
2656 - README fixes.
2657 - Move doc2000.h include to prevent compiler warning on some boards
2658
wdenk6c7a1402004-07-11 19:17:20 +00002659* Patch by Mark Jonas, 01 Jul 2004:
2660 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
2661 MGT5100 and MPC5200 based Freescale platforms.
2662
wdenkbc54f302004-07-11 18:10:30 +00002663* Patch by Philippe Robin, 01 Jul 2004:
2664 Add initialization for Integrator and versatile board files.
2665
2666* Patch by Hinko Kocevar, 01 Jun 2004:
2667 Fix VFD FB allocation, add LCD FB allocation on ARM
2668
wdenk56523f12004-07-11 17:40:54 +00002669* Patch by Martin Krause, 30 Jun 2004:
2670 Add support for TQM5200 board
2671
2672* Patch by Martin Krause, 29 Jun 2004:
2673 Add loopw command: infinite write loop on address range
2674
wdenk857cad32004-07-10 23:48:41 +00002675* Patches by Yasushi Shoji, 29 Jun 2004:
2676 - add empty include/asm-microblaze/processor.h
2677 - add to CREDITS and MAINTAINERS
2678 - add gd initialization
2679 - add MicroBlaze and SUZAKU board to MAKEALL script
2680 - add reset support for SUZAKU
2681 - add flush_cache() for MicroBlaze
2682 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
2683 size flash memory on SUZAKU
2684
wdenkfabd46a2004-07-10 23:11:10 +00002685* Patch by Prakash Kumar, 27 Jun 2004:
2686 Add support for the PXA250 based Intrinsyc Cerf board.
2687
2688* Patch by Yasushi Shoji, 27 Jun 2004:
2689 fix comment in include/common.h
2690
wdenk466b7412004-07-10 22:35:59 +00002691* Rename SBC8560 into sbc8560 for consistency
2692
2693* Patch by Daniel Poirot, 24 Jun 2004:
2694 Add support for Wind River's sbc8240 board
2695
2696* Patches by Yasushi Shoji, 26 Jun 2004:
2697 - drivers/serial_xuartlite.c: fix "return 0" in void function
2698 - add microblaze support to mkimage tool
2699
wdenk8b07a112004-07-10 21:45:47 +00002700* Patch by Fred Klatt, 25 Jun 2004:
wdenk466b7412004-07-10 22:35:59 +00002701 Add support for WindRiver's sbc8560 board
wdenk8b07a112004-07-10 21:45:47 +00002702
2703* Patch by Nicolas Lacressonniere, 24 Jun 2004
2704 Small Bugs fixes for "at91rm9200dk" board:
2705 - Timing modifications for SPI DataFlash access
2706 - Fix NAND flash detection bug
2707
2708* Patch by Nicolas Lacressonniere, 24 Jun 2004:
2709 Add Support for Flash AT49BV6416 for AT91RM9200DK board
2710
wdenk0ac6f8b2004-07-09 23:27:13 +00002711* Patch by Jon Loeliger, 17 June 2004:
2712 Completion of the 8540ADS/8560ADS updates:
2713 Fix some PCI and Rapid I/O memory maps,
2714 Initialize both TSEC 1 and 2,
2715 Initialize SDRAM
2716 Update MAINTAINER for 85xx boards and README.mpc85xxads
2717
wdenk26238132004-07-09 22:51:01 +00002718* Patch by Yuli Barcohen, 16 Jun 2004:
2719 Remove obsolete AdderII port which was superseded by unified
2720 AdderII/Adder87x port
2721
2722* Patch by Ladislav Michl, 16 Jun 2004:
2723 Fix gcc-3.3.3 warnings for smc91111.c
2724
stroeseede13022004-07-02 14:38:26 +00002725* Patch by Stefan Roese, 02 Jul 2004:
2726 - Fix bug in 405 ethernet driver; allocated data not cleared!
2727 - Fix problem in 405 i2c driver; don't try to print without console!
2728
wdenk78953f22004-07-01 22:02:29 +00002729* Patch by Paul Ruhland, 11 Jun 2004:
2730 Remove debug code from 'board/lpd7a40x/flash.c'
2731
wdenke55ca7e2004-07-01 21:40:08 +00002732* Patch by Andrea Marson, 11 Jun 2004:
2733 Update for PPChameleon board:
2734 - support for SysClk @ 25MHz
2735 - support for Silicon Motion SM712 VGA controller
2736 - some clean ups
2737
wdenk93f6a672004-07-01 20:28:03 +00002738* Patches by Richard Woodruff, 10 Jun 2004:
2739 - fix problems with examples/stubs.c for GCC >= 3.4
2740 - fix problems with gd initialization
2741
wdenk39539882004-07-01 16:30:44 +00002742* Patch by Curt Brune, 17 May 2004:
2743 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
2744 - Add support for ESPD-Inc. EVB4510 Board
2745
2746* Patch by Marc Leeman, 11 May 2004:
2747 Fix for MPC8245 - reading PPC Memory from another device with the
2748 PPC as PCI target device corrupts data due to interenal hardware
2749 buffering.
2750
wdenke94d2cd2004-06-30 22:59:18 +00002751* Fix "cls" command when used with splash screen
2752
2753* Increase NFS download timeout (now 1 min - 10 sec is to short for a
2754 slow download of a big image)
2755
wdenkc3f4d172004-06-25 23:35:58 +00002756* Add "cls" function to MPC823 LCD driver so we can reinitialize the
2757 display even after showing a bitmap
2758
wdenk49822e22004-06-19 21:19:10 +00002759* Patch by Josef Wagner, 04 Jun 2004:
2760 - DDR Ram support for PM520 (MPC5200)
2761 - support for different flash types (PM520)
2762 - USB / IDE / CF-Card / DiskOnChip support for PM520
2763 - 8 bit boot rom support for PM520/CE520
2764 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
2765 - I2C and RTC support for CPC45
2766 - support of new flash type (28F160C3T) for CPC45
2767
wdenk46a414d2004-06-17 18:50:45 +00002768* Fix flash parameters passed to Linux for PPChameleon board
2769
2770* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
2771
wdenkf832d8a2004-06-10 21:55:33 +00002772* Patch by Paul Ruhland, 10 Jun 2004:
wdenk49822e22004-06-19 21:19:10 +00002773 fix support for Logic SDK-LH7A404 board and clean up the
wdenkf832d8a2004-06-10 21:55:33 +00002774 LH7A404 register macros.
2775
2776* Patch by Matthew McClintock, 10 Jun 2004:
2777 Modify code to select correct serial clock on Sandpoint8245
2778
wdenkb54d32b2004-06-10 21:34:36 +00002779* Patch by Robert Schwebel, 10 Jun 2004:
2780 Add support for Intel K3 strata flash.
2781
2782* Patch by Thomas Brand, 10 Jun 2004:
2783 Fix "loads" command on DK1S10 board
2784
wdenk2d24a3a2004-06-09 21:50:45 +00002785* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk99edcfb2004-06-09 21:54:22 +00002786 Add support for 8MB flash SIMM and JFFS2 file system on
2787 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
2788
2789* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk2d24a3a2004-06-09 21:50:45 +00002790 Add support for Analogue&Micro Adder87x and the older AdderII board.
2791
2792* Patch by Ming-Len Wu, 09 Jun 2004:
2793 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
2794
wdenke63c8ee2004-06-09 21:04:48 +00002795* Patch by Sam Song, 09 Jun 2004:
2796 - Add support for RPXlite_DW board
2797 - Update FLASH driver for 4*AM29DL323DB90VI
2798 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
2799
wdenk36c72872004-06-09 17:45:32 +00002800* Patch by Mark Jonas, 08 June 2004:
2801 - Make MPC5200 boards evaluate the SVR to print processor name and
2802 version in checkcpu() (cpu/mpc5xxx/cpu.c).
2803
2804* Patch by Kai-Uwe Bloem, 06 May 2004:
2805 Fix endianess problem in cramfs code
2806
wdenk4c0d4c32004-06-09 17:34:58 +00002807* Patch by Tom Armistead, 04 Jun 2004:
2808 Add support for MAX6900 RTC
2809
2810* Patches by Ladislav Michl, 03 Jun 2004:
2811 - fix cfi_flash.c on LE systems
2812 - let 'make mrproper' delete u-boot.img as well
2813 - turn printf into debug in cfi_flash.c
2814
wdenkca0e7742004-06-09 15:37:23 +00002815* Patch by Kurt Stremerch, 28 May 2004:
2816 Add support for Exys XSEngine board
2817
wdenk697037f2004-06-09 15:29:49 +00002818* Patch by Martin Krause, 27 May 2004:
2819 Fix a MPC5xxx I2C timing issue in i2c_probe().
2820
2821* Patch by Leif Lindholm, 27 May 2004:
2822 Fix board_init_f() for dbau1x00 board.
2823
wdenk3ff02c22004-06-09 15:25:53 +00002824* Patch by Imre Deak, 26 May 2004:
2825 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
2826 Set flash base accordingly, and decide whether to do or skip board
2827 specific setup steps.
2828
2829* Patch by Josef Baumgartner, 26 May 2004:
2830 Add missing define in include/asm-m68k/global_data.h
2831
wdenk70f05ac2004-06-09 15:24:18 +00002832* Patch by Josef Baumgartner, 25 May 2004:
2833 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
2834
2835* Patch by Paul Ruhland, 24 May 2004:
2836 fix SDRAM initialization for LPD7A400 board.
2837
wdenk13a56952004-06-09 14:58:14 +00002838* Patch by Jian Zhang, 20 May 2004:
2839 add support for environment in NAND flash
2840
wdenkc3c7f862004-06-09 14:47:54 +00002841* Patch by Yuli Barcohen, 20 May 2004:
2842 Add support for Interphase iSPAN boards.
2843
2844* Patches by Paul Ruhland, 17 May 2004:
2845 - Add I/O functions to the smc91111 ethernet driver to support the
2846 Logic LPD7A40x boards.
wdenkf39748a2004-06-09 13:37:52 +00002847 - Add support for the Logic Zoom LH7A40x based SDK board(s),
2848 specifically the LPD7A400.
2849
2850* Patches by Robert Schwebel, 15 May 2004:
2851 - call MAC address reading code also for SMSC91C111;
2852 - make SMSC91C111 timeout configurable, remove duplicate code
2853 - fix get_timer() for PXA
2854 - update doc/README.JFFS2
2855 - use "bootfile" env variable also for jffs2
2856
wdenkaa245092004-06-09 12:47:02 +00002857* Patch by Tolunay Orkun, 14 May 2004:
2858 Add support for Cogent CSB472 board (8MB Flash Rev)
2859
wdenkaa5590b2004-06-09 12:42:26 +00002860* Patch by Thomas Viehweger, 14 May 2004:
2861 - flash.h: more flash types added
2862 - immap_8260.h: some bits added (useful for RMII)
2863 - cmd_coninfo.c: typo corrected, printf -> puts
2864 - reduced size by replacing spaces with tab
2865
wdenk48abe7b2004-06-09 10:15:00 +00002866* Patch by Robert Schwebel, 13 May 2004:
2867 Add 'imgextract' command: extract one part of a multi file image.
2868
wdenk547b4cb2004-06-09 00:51:50 +00002869* Patches by Jon Loeliger, 11 May 2004:
wdenk97d80fc2004-06-09 00:34:46 +00002870 Dynamically handle REV1 and REV2 MPC85xx parts.
2871 (Jon Loeliger, 10-May-2004).
2872 New consistent memory map and Local Access Window across MPC85xx line.
2873 New CCSRBAR at 0xE000_0000 now.
2874 Add RAPID I/O memory map.
2875 New memory map in README.MPC85xxads
2876 (Kumar Gala, 10-May-2004)
2877 Better board and CPU identification on MPC85xx boards at boot.
2878 (Jon Loeliger, 10-May-2004)
2879 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
2880 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
2881 (Jim Robertson, 10-May-2004)
2882 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
2883 Supports multiple PHYs.
2884 (Andy Fleming, 10-May-2004)
2885 Some README.MPC85xxads updates.
2886 (Kumar Gala, 10-May-2004)
2887 Copyright updates for "Freescale"
2888 (Andy Fleming, 10-May-2004)
2889
wdenk6bdd1372004-06-09 00:15:33 +00002890* Patch by Stephen Williams, 11 May 2004:
2891 Add flash support for ST M29W040B
2892 Reduce JSE specific flash.c to remove dead code.
2893
wdenk356a0d92004-06-09 00:10:59 +00002894* Patch by Markus Pietrek, 04 May 2004:
2895 Fix clear_bss code for ARM systems (all except s3c44b0 which
2896 doesn't clear BSS at all?)
2897
2898* Fix "ping" problem on INC-IP board. Strange problem:
2899 Sometimes the store word instruction hangs while writing to one of
2900 the Switch registers, but only if the next instruction is 16-byte
2901 aligned. Moving the instruction into a separate function somehow
2902 makes the problem go away.
2903
wdenk1eaeb582004-06-08 00:22:43 +00002904* Patch by Rishi Bhattacharya, 08 May 2004:
2905 Add support for TI OMAP5912 OSK Board
2906
2907* Patch by Sam Song May, 07 May 2004:
2908 Fix typo of UPM table for rmu board
2909
2910* Patch by Pantelis Antoniou, 05 May 2004:
wdenk79fa88f2004-06-07 23:46:25 +00002911 - Intracom board update.
2912 - Add Codec POST.
2913
wdenkcea655a2004-06-06 23:53:59 +00002914* Add support for the second Ethernet interface for the 'PPChameleon'
2915 board.
2916
wdenka56bd922004-06-06 23:13:55 +00002917* Patch by Dave Peverley, 30 Apr 2004:
2918 Add support for OMAP730 Perseus2 Development board
2919
2920* Patch by Alan J. Luse, 29 Apr 2004:
2921 Fix flash chip-select (OR0) option register setting on FADS boards.
2922
2923* Patch by Alan J. Luse, 29 Apr 2004:
2924 Report MII network speed and duplex setting properly when
2925 auto-negotiate is not enabled.
2926
2927* Patch by Jarrett Redd, 29 Apr 2004:
2928 Fix hang on reset on Ocotea board due to flash in wrong mode.
2929
wdenk5ca26792004-06-06 22:11:41 +00002930* Patch by Dave Peverley, 29 Apr 2004:
2931 add MAC address detection to smc91111 driver
2932
2933* Patch by David Müller, 28 Apr 2004:
2934 fix typo in lib_arm/board.c
2935
wdenk17ea1172004-06-06 21:51:03 +00002936* Patch by Tolunay Orkun, 20 Apr 2004:
2937 - README update: add CONFIG_CSB272 and csb272_config
2938 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
2939 i2cfast environment variable
2940
wdenk11142572004-06-06 21:35:06 +00002941* Patch by Yuli Barcohen, 19 Apr 2004:
2942 - Rename DUET_ADS to MPC885ADS
2943 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
2944 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
2945 - Clean up FADS family port to use the new defines
2946
wdenk979bdbc2004-06-01 21:08:17 +00002947* Fix PCI support on CPC45 board
2948
wdenke4cc71a2004-05-19 21:33:14 +00002949* Patch by Scott McNutt, 25 Apr 2004:
2950 Add Nios GDB/JTAG Console support:
2951 - Add stubs to support gdb via JTAG.
2952 - Add support for console over JTAG.
2953 - Minor cleanup.
2954
wdenk10767cc2004-05-13 13:23:58 +00002955* Add support for CATcenter board (based on PPChameleon ME module)
2956
wdenk02b11f82004-05-12 22:54:36 +00002957* Patch by Klaus Heydeck, 12 May 2004:
2958 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
2959 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
2960 various changes to KUP4 board specific files
2961
wdenk6c1362c2004-05-12 22:18:31 +00002962* Fix minor network problem on MPC5200: need some delay between
2963 resetting the PHY and sending the first packet. Implemented in a
2964 "natural" way by invoking the PHY reset and initialization code
2965 only once after power on vs. each time the interface is brought up.
2966
wdenk9d9e2832004-05-11 21:53:55 +00002967* Add some limited support for low-speed devices to SL811 USB controller
2968 (at least "usb reset" now passes successfully and "usb info" displays
2969 correct information)
2970
wdenkbaac6072004-05-08 20:33:20 +00002971* Change init sequence for multiple network interfaces: initialize
2972 on-chip interfaces before external cards.
2973
wdenk32877d62004-05-05 19:44:41 +00002974* Fix memory leak in the NAND-specific JFFS2 code
2975
2976* Fix SL811 USB controller when attached to a USB hub
2977
wdenk62b4ac92004-05-05 08:31:53 +00002978* Fix config option spelling in PM520 config file
2979
2980* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
2981 patches by Pantelis Antoniou, 30 Mar 2004)
2982
wdenk2729af92004-05-03 20:45:30 +00002983* Fix minor NAND JFFS2 related issue
2984
2985* Fixes for SL811 USB controller:
2986 - implement workaround for broken memory stick
2987 - improve error handling
2988
2989* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
2990 cope with congested networks.
2991
2992======================================================================
wdenk56b86bf2004-04-12 14:31:43 +00002993Changes for U-Boot 1.1.1:
2994======================================================================
wdenk507bbe32004-04-18 21:13:41 +00002995
wdenkfc1cfcd2004-04-25 15:41:35 +00002996* Patch by Travis Sawyer, 23 Apr 2004:
2997 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
2998 errata from Vitesse Semiconductor.
wdenk0b8fa032004-04-25 14:37:29 +00002999
3000* Patch by Philippe Robin, 22 Apr 2004:
wdenk02b11f82004-05-12 22:54:36 +00003001 Fix ethernet configuration for "versatile" board
wdenk0b8fa032004-04-25 14:37:29 +00003002
3003* Patch by Kshitij Gupta, 21 Apr 2004:
3004 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
3005
3006* Patch by Steven Scholz, 24 Feb 2004:
3007 Fix a bug in AT91RM9200 ethernet driver:
3008 The MII interface is now initialized before accessing the PHY.
3009
wdenkb9711de2004-04-25 13:18:40 +00003010* Patch by John Kerl, 19 Apr 2004:
3011 Use U-boot's miiphy.h for PHY register names, rather than
3012 introducing a new header file.
3013
3014* Update pci_ids.h from linux-2.4.26
3015
3016* Patch by Masami Komiya, 19 Apr 2004:
3017 Fix problem cause by VLAN function on little endian architecture
3018 without VLAN environment
3019
wdenke9132ea2004-04-24 23:23:30 +00003020* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenkb9711de2004-04-25 13:18:40 +00003021 binary image for all clock frequencies. Implement run-time
wdenke9132ea2004-04-24 23:23:30 +00003022 optimization of flash access timing based on the actual bus
3023 frequency.
3024
wdenk5cf91d62004-04-23 20:32:05 +00003025* Modify KUP4X board configuration to use SL811 driver for USB memory
3026 sticks (including FAT / VFAT filesystem support)
3027
3028* Add SL811 Host Controller Interface driver for USB
3029
3030* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
3031
3032* Patch by Pantelis Antoniou, 19 Apr 2004:
3033 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
3034 Minor patches for Intracom boards.
3035
3036* Patch by Christian Pell, 19 Apr 2004:
3037 cleanup support for CF/IDE on PCMCIA for PXA25X
3038
wdenke35745b2004-04-18 23:32:11 +00003039* Temporarily disabled John Kerl's extended MII command code because
3040 "miivals.h" is missing
3041
3042* Patches by Mark Jonas, 13 Apr 2004:
3043 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
3044 - Add sync instructions to IceCube SDRAM init code
3045 - Move SDRAM chip constants into seperate include files
3046 - Unify DDR and SDR initialization code
3047 - Unify all IceCube (Lite5xxx) target names
3048
wdenk24711112004-04-18 22:57:51 +00003049* Patch by John Kerl, 16 Apr 2004:
3050 Enable ranges in mii command, e.g. mii read 0-1f 0 or
3051 mii read 4-7 18-1a. Also add mii dump subcommand for
3052 pretty-printing standard regs 0-5.
3053
3054* Patch by Stephen Williams, 16 April 2004:
3055 fix typo in JSE.h; update MAINTAINERS
3056
wdenk498b8db2004-04-18 22:26:17 +00003057* Patch by Matthew S. McClintock, 14 Apr 2004:
3058 fix initdram function for utx8245 board
3059
3060* Patch by Markus Pietrek, 14 Apr 2004:
3061 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
3062
3063* Patch by Reinhard Meyer, 18 Apr 2004:
3064 provide the IDE Reset Function for EMK 5200 boards
3065
3066* Patch by Masami Komiya, 12 Apr 2004:
3067 fix pci_hose_write_config_{byte,word}_via_dword problems
3068
wdenka8bd82d2004-04-18 22:03:42 +00003069* Patch by Sangmoon Kim, 12 Apr 2004:
3070 Update max RAM size for debris board
3071
3072* Patch by Travis Sawyer, 08 Apr 2004:
3073 Add TLB entry for second DIMM slot on ocotea
3074
3075* Patch by Masami Komiya, 08 Apr 2004:
3076 add RTL8169 network driver
3077
wdenk7abf0c52004-04-18 21:45:42 +00003078* Patch by Dan Malek, 07 Apr 2004:
3079 - Add support for RPC/STx GP3, Motorola 8560 board
3080 - Update 85xx TSEC driver so it searches MII for first available PHY
3081 and uses that one.
3082 - Add functions to support console MII commands.
3083
3084* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka8bd82d2004-04-18 22:03:42 +00003085 Move initialization of bi_iic_fast[]
wdenk7abf0c52004-04-18 21:45:42 +00003086 from board_init_f() to board_init_r()
3087
3088* Patch by Yasushi Shoji, 07 Apr 2004:
3089 Cleanup microblaze port
3090
3091* Patch by Sangmoon Kim, 07 Apr 2004:
3092 Add auto SDRAM module detection for Debris board
3093
wdenkd4326ac2004-04-18 21:17:30 +00003094* Patch by Rune Torgersen, 06 Apr 2004:
3095 - Fix some PCI problems on the MPC8266ADS board
3096 - Fix the location of some PCI entries in the immap structure
3097
wdenk507bbe32004-04-18 21:13:41 +00003098* Patch by Yasushi Shoji, 07 Apr 2004:
3099 - add support for microblaze processors
3100 - add support for AtmarkTechno "suzaku" board
3101
wdenk998eaae2004-04-18 19:43:36 +00003102* Configure PPChameleon board to use redundand environment in flash
3103
3104* Configure PPChameleon board to use JFFS2 NAND support.
3105
3106* Added support for JFFS2 filesystem (read-only) on top of NAND flash
3107
wdenk6e592382004-04-18 17:39:38 +00003108* Patch by Rune Torgersen, 16 Apr 2004:
3109 LBA48 fixes
wdenk56b86bf2004-04-12 14:31:43 +00003110
wdenkc26e4542004-04-18 10:13:26 +00003111* Patches by Pantelis Antoniou, 16 Apr 2004:
3112 - add support for a new version of an Intracom board and fix
3113 various other things on others.
3114 - add verify support to the crc32 command (define
3115 CONFIG_CRC32_VERIFY to enable it)
3116 - fix FEC driver for MPC8xx systems:
3117 1. fix compilation problems for boards that use dynamic
3118 allocation of DPRAM
3119 2. shut down FEC after network transfers
3120 - HUSH parser fixes:
3121 1. A new test command was added. This is a simplified version of
3122 the one in the bourne shell.
3123 2. A new exit command was added which terminates the current
3124 executing script.
3125 3. Fixed handing of $? (exit code of last executed command)
wdenk6e592382004-04-18 17:39:38 +00003126 - Fix some compile problems;
3127 add "once" functionality for the netretry variable
wdenkc26e4542004-04-18 10:13:26 +00003128
wdenkea66bc82004-04-15 23:23:39 +00003129* Patch by George G. Davis, 02 Apr 2004:
3130 add support for Intel Assabet board
3131
wdenkdb01a2e2004-04-15 23:14:49 +00003132* Patch by Stephen Williams, 01 Apr 2004:
3133 Add support for Picture Elements JSE board
3134
3135* Patch by Christian Pell, 01 Apr 2004:
3136 Add CompactFlash support for PXA systems.
3137
wdenk04a85b32004-04-15 18:22:41 +00003138* Patches by Pantelis Antoniou, 30 Mar 2004:
3139 - add auto-complete support to the U-Boot CLI
3140 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk5a8c51c2004-04-15 21:16:42 +00003141 - add support for the Epson 156x series of graphical displays
3142 (These displays are serial and not suitable for using a normal
3143 framebuffer console on them)
3144 - add infrastructure needed in order to POST any DSPs in a board
wdenka6ab4bf2004-04-15 21:31:56 +00003145 - improve and fix various things in the MPC8xx FEC driver:
3146 1. The new 87x and 88x series of processors have two FECs,
3147 and the new driver supports them both.
3148 2. Another change in the 87x/88x series is support for
3149 the RMII (Reduced MII) interface. However numerous
3150 changes are needed to make it work since the PHYs
3151 are connected to the same lines. That means that
3152 you have to address them correctly over the MII
3153 interface.
3154 3. We now correctly match the MII/RMII interface
3155 configuration to what the PHY reports.
wdenka3d991b2004-04-15 21:48:45 +00003156 - Fix problem when readingthe MII status register. Due to the
3157 internal design of many PHYs you have to read the register
3158 twice. The problem is more apparent in 10Mbit mode.
3159 - add new mode ".jffs2s" for reading from a NAND device: it just
3160 skips over bad blocks.
3161 - add networking support for VLANs (802.1q), and CDP (Cisco
3162 Discovery Protocol)
wdenkbda6c8a2004-04-15 21:58:11 +00003163 - some minor patches / cleanup
wdenk04a85b32004-04-15 18:22:41 +00003164
3165* Patch by Yuli Barcohen, 28 Mar 2004:
3166 - Add support for MPC8272 family including MPC8247/8248/8271/8272
3167 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
3168 - Change configuration method for MPC8260ADS family
3169
wdenkd716b122004-04-12 16:12:49 +00003170* add startup code to clear the BSS of standalone applications
3171
wdenk56b86bf2004-04-12 14:31:43 +00003172* Fix if / elif handling bug in HUSH shell
3173
3174======================================================================
wdenkf525c8a2004-04-10 20:44:51 +00003175Changes for U-Boot 1.1.0:
wdenkc83bf6a2004-01-06 22:38:14 +00003176======================================================================
3177
wdenk7e780362004-04-08 22:31:29 +00003178* Patch by Mark Jonas: Remove config.tmp files only when
3179 unconfiguring the board
3180
3181* Adapt RMU board for bigger flash memory
3182
wdenk0608e042004-03-25 19:29:38 +00003183* Patch by Klaus Heydeck, 13 Mar 2003:
3184 Add support for KUP4X Board
3185
wdenk518e2e12004-03-25 14:59:05 +00003186* Patch by Pavel Bartusek, 21 Mar 2004
3187 Add Reiserfs support
3188
3189* Patch by Hinko Kocevar, 20 Mar 2004
3190 - Add auto-release for SMSC LAN91c111 driver
3191 - Add save/restore of PTR and PNR regs as suggested in datasheet
3192
wdenk6fb6af62004-03-23 23:20:24 +00003193* Patch by Stephen Williams, 19 March 2004
3194 Increase speed of sector reads from SystemACE,
3195 shorten poll timeout and remove a useless reset
3196
3197* Patch by Tolunay Orkun, 19 Mar 2004:
3198 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
3199 (CONFIG_PHY_GIGE)
3200
3201* Patch by Brad Kemp, 18 Mar 2004:
3202 prevent machine checks during a PCI scan
3203
3204* Patch by Pierre Aubert, 18 Mar 2004:
3205 Fix string cleaning in IDE identification
3206
wdenkeeb1b772004-03-23 22:53:55 +00003207* Patch by Pierre Aubert, 18 Mar 2004:
3208 - Unify video mode handling for Chips & Technologies 69000 Video
3209 chip and Silicon Motion SMI 712/710/810 Video chip
3210 - Add selection of the video output (CRT or LCD) via 'videoout'
3211 environment variable for the Silicon Motion
3212 - README update
3213
3214* Patch by Pierre Aubert, 18 Mar 2004:
3215 include/common.h typo fix
3216
3217* Patches by Tolunay Orkun, 17 Mar 2004:
3218 - Add support for bd->bi_iic_fast[] initialization via environment
3219 variable "i2cfast" (CONFIG_I2CFAST)
3220 - Add "i2cfast" u-boot environment variable support for csb272
3221
wdenk27aa8182004-03-23 22:37:33 +00003222* Patch by Carl Riechers, 17 Mar 2004:
3223 Ignore '\0' characters in console input for use with telnet and
3224 telco pads.
3225
3226* Patch by Leon Kukovec, 17 Mar 2004:
3227 typo fix for strswab prototype #ifdef
3228
wdenk4b9206e2004-03-23 22:14:11 +00003229* Patches by Thomas Viehweger, 16 Mar 2004:
3230 - show PCI clock frequency on MPC8260 systems
3231 - add FCC_PSMR_RMII flag for HiP7 processors
3232 - in do_jffs2_fsload(), take load address from load_addr if not set
3233 explicit, update load_addr otherwise
3234 - replaced printf by putc/puts when no formatting is needed
3235 (smaller code size, faster execution)
3236
wdenk109c0e32004-03-23 21:43:07 +00003237* Patch by Phillippe Robin, 16 Mar 2004:
3238 avoid dereferencing NULL pointer in lib_arm/armlinux.c
3239
3240* Patch by Stephen Williams, 15 Mar 2004:
3241 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
3242
3243* Patch by Tolunay Orkun, 15 Mar 2004:
3244 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
3245
3246* Patch by Travis Sawyer, 15 Mar 2004:
3247 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
3248
wdenkefa329c2004-03-23 20:18:25 +00003249* Add start-up delay to make sure power has stabilized before
3250 attempting to switch on USB on SX1 board.
3251
3252* Patch by Josef Wagner, 18 Mar 2004:
3253 - Add support for MicroSys XM250 board (PXA255)
3254 - Add support for MicroSys PM828 board (MPC8280)
3255 - Add support for 32 MB Flash on PM825/826
3256 - new SDRAM refresh rate for PM825/PM826
3257 - added support for MicroSys PM520 (MPC5200)
3258 - replaced Query by Identify command in CPU86/flash.c
3259 to support 28F160F3B
3260
3261* Fix wrap around problem with udelay() on ARM920T
3262
3263* Add support for Macronix flash on TRAB board
3264
wdenk7d7ce412004-03-17 01:13:07 +00003265* Patch by Pierre Aubert, 15 Mar 2004:
3266 Fix buffer overflow in IDE identification
3267
3268* Fix power-off of LCD for out-of-band temperatures on LWMON board
3269
3270* Remove redundand #define in IceCube.h
3271
wdenkd9df1f42004-03-15 09:00:01 +00003272* Patch by Steven Scholz, 27 Feb 2004:
3273 - Adding get_ticks() and get_tbclk() for AT91RM9200
3274 - Many white space fixes in cpu/at91rm9200/interrupts.c
3275
3276* Patches by Steven Scholz, 20 Feb 2004:
3277 some cleanup in AT91RM9200 related code
3278
wdenk855a4962004-03-14 18:23:55 +00003279* Patches by Travis Sawyer, 12 Mar 2004:
3280 - Fix Gigabit Ethernet support for 440GX
3281 - Add Gigabit Ethernet Support to MII PHY utilities
3282
3283* Patch by Brad Kemp, 12 Mar 2004:
3284 Fixes for drivers/cfi_flash.c:
3285 - Better support for x8/x16 implementations
3286 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
3287 - Added defines for AMD command and address constants
3288
3289* Patch by Leon Kukovec, 12 Mar 2004:
3290 Fix get_dentfromdir() to correctly handle deleted dentries
wdenk42dfe7a2004-03-14 22:25:36 +00003291
wdenk855a4962004-03-14 18:23:55 +00003292* Patch by George G. Davis, 11 Mar 2004:
3293 Remove hard coded network settings in TI OMAP1610 H2
3294 default board config
3295
3296* Patch by George G. Davis, 11 Mar 2004:
3297 add support for ADS GraphicsClient+ board.
3298
wdenk7d7ce412004-03-17 01:13:07 +00003299* Patch by Pierre Aubert, 11 Mar 2004:
wdenk4b248f32004-03-14 16:51:43 +00003300 - add bitmap command and splash screen support in cfb console
3301 - add [optional] origin in the bitmap display command
3302
3303* Patch by Travis Sawyer, 11 Mar 2004:
3304 Fix ocotea board early init interrupt setup.
3305
3306* Patch by Thomas Viehweger, 11 Mar 2004:
3307 Remove redundand code; add PCI-specific bits to include/mpc8260.h
3308
wdenkaaf224a2004-03-14 15:20:55 +00003309* Patch by Stephan Linz, 09 Mar 2004
3310 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
3311
3312* Patch by George G. Davis, 9 Mar 2004:
3313 fix recent build failure for SA1100 target
3314
3315* Patch by Travis Sawyer, 09 Mar 2004:
3316 Support native interrupt mode for the IBM440GX.
3317 Previously it was running in 440GP compatibility mode.
3318
wdenk3d3befa2004-03-14 15:06:13 +00003319* Patch by Philippe Robin, 09 Mar 2004:
3320 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
3321 Platform support.
3322
3323* Patch by Masami Komiya, 08 Mar 2004:
3324 Don't overwrite server IP address or boot file name
3325 when the boot server does not return values
3326
wdenk7d7ce412004-03-17 01:13:07 +00003327* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk3d3befa2004-03-14 15:06:13 +00003328 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
3329
wdenk4d13cba2004-03-14 14:09:05 +00003330* Patch by Tolunay Orkun, 5 Mar 2004:
3331 Fix early board initialization for Cogent CSB272 board
3332
3333* Patch by Ed Okerson, 3 Mar 2004:
3334 fix CFI flash writes for little endian systems
3335
3336* Patch by Reinhard Meyer, 01 Mar 2004:
3337 generalize USB and IDE support for MPC5200 with according
3338 changes to IceCube.h and TOP5200.h
3339 add Am29LV256 256 MBit FLASH support for TOP5200 boards
3340 add info about USB and IDE to README
3341
wdenkc3f9d492004-03-14 00:59:59 +00003342* Patch by Yuli Barcohen, 4 Mar 2004:
3343 Fix problems with GCC 3.3.x which changed handling of global
3344 variables explicitly initialized to zero (now in .bss instead of
3345 .data as before).
3346
3347* Patch by Leon Kukovec, 02 Mar 2004:
3348 add strswab() to fix IDE LBA capacity, firmware and model numbers
3349 on little endian machines
3350
3351* Patch by Masami Komiya, 02 Mar 2004:
3352 - Remove get_ticks() from NFS code
3353 - Add verification of RPC transaction ID
3354
3355* Patch by Pierre Aubert, 02 Mar 2004:
3356 cleanup for IDE and USB drivers for MPC5200
3357
3358* Patch by Travis Sawyer, 01 Mar 2004:
wdenk0e6d7982004-03-14 00:07:33 +00003359 Ocotea:
3360 - Add IBM PPC440GX Ref Platform support (Ocotea)
3361 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
3362 Adapted to U-Boot and 440GX port
3363 440gx_enet.c:
3364 - Add gracious handling of all Ethernet Pin Selections for 440GX
3365 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
3366 ppc440.h:
3367 - Add needed bit definitions
3368 - Fix formatting
3369
3370* Patch by Carl Riechers, 1 Mar 2004:
3371 Add PPC440GX prbdv0 divider to fix memory clock calculation.
3372
3373* Patch by Stephan Linz, 27 Feb 2004
3374 - avoid problems for targets without NFS download support
3375
wdenkc40b2952004-03-13 23:29:43 +00003376* Patch by Rune Torgersen, 27 Feb 2004:
3377 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
3378 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
3379 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
3380
3381* Patch by Masami Komiya, 27 Feb 2004:
3382 Fix rarpboot: add autoload by NFS
3383
3384* Patch by Dan Eisenhut, 26 Feb 2004:
3385 fix flash_write return value in saveenv
3386
3387* Patch by Stephan Linz, 11 Dec 2003
3388 expand config.mk to avoid trigraph warnings on NIOS
3389
3390* Rename "BMS2003" board into "HMI10"
3391
wdenk6629d2f2004-03-12 15:38:25 +00003392* SX1 patches: use "serial#" for USB serial #; use redundand environment
3393 storage; auto-set console on USB port (using preboot command)
3394
wdenk232c1502004-03-12 00:14:09 +00003395* Add support for SX1 mobile phone; add support for USB-based console
3396 (enable with "setenv stdout usbtty; setenv stdin usbtty")
3397
wdenk79d696f2004-03-11 22:46:36 +00003398* Fix LOWBOOT configuration for MPC5200 with DDR memory
3399
wdenkf8d813e2004-03-02 14:05:39 +00003400* Fix SDRAM timings for LITE5200 / IceCube board
3401
3402* Handle Auti-MDIX / connection status for INCA-IP
3403
3404* Fix USB problems when attempting to read 0 bytes
3405
wdenke7c85682004-02-27 08:21:54 +00003406* Patch by Travis Sawyer, 26 Feb 2004:
3407 Fix broken compile for XPEDITE1K target.
3408
3409* Patch by Stephan Linz, 26 Feb 2004:
3410 Bug fix for NFS code on NIOS targets
wdenk232c1502004-03-12 00:14:09 +00003411
wdenke7c85682004-02-27 08:21:54 +00003412* Patch by Stephen Williams, 26 Feb 2004:
3413 Break up SystemACE reads of large block counts
3414
wdenk132ba5f2004-02-27 08:20:54 +00003415* Patch by Pierre Aubert, 26 Feb 2004
3416 add IDE support for MPC5200
3417
3418* Patch by Masami Komiya, 26 Feb 2004:
3419 add autoload via NFS
3420
3421* Patch by Stephen Williams
3422 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
3423 elsewhere in the source.
3424
wdenk11dadd52004-02-27 00:07:27 +00003425* Patch by Steven Scholz, 25 Feb 2004:
3426 - Timeouts in FPGA code should be based on CFG_HZ
3427 - Minor cleanup in code for Altera FPGA ACEX1K
3428
3429* Patch by Steven Scholz, 25 Feb 2004:
3430 Changed "Directory Hierarchy" section in README
3431
3432* Patch by Masami Komiya, 25 Feb 2004:
3433 Reduce copy count in nfs_read_reply() of NFS code
3434
wdenk80885a92004-02-26 23:46:20 +00003435* Patch by Markus Pietrek, 24 Feb 2004:
3436 NS9750 DevBoard added
3437
wdenk132ba5f2004-02-27 08:20:54 +00003438* Patch by Pierre Aubert, 24 Feb 2004
wdenk80885a92004-02-26 23:46:20 +00003439 add USB support for MPC5200
3440
3441* Patch by Steven Scholz, 24 Feb 2004:
3442 - fix MII commands to use values from last command
3443
3444* Patch by Torsten Demke, 24 Feb 2004:
3445 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
3446
wdenk0c852a22004-02-26 23:01:04 +00003447* Patch by Rahul Shanbhag, 19 Feb 2004:
3448 Fixes for for OMAP1610 board:
3449 - shift some IRQ specific code to platform.S file
3450 - remove duplicatewatchdog reset code from start.S
3451
3452* Make Auto-MDIX Support configurable on INCA-IP board
3453
3454* Fix license for mkimage tool
3455
wdenka084f7d2004-02-24 22:33:21 +00003456* Patch by Masami Komiya, 24 Feb 2004:
3457 Update NetBootFileXferSize in NFS code
3458
3459* Patch by Scott McNutt, 24 Feb 2004:
3460 fix packet length in NFS code
3461
wdenkcbd8a352004-02-24 02:00:03 +00003462* Patch by Masami Komiy, 22 Feb 2004:
3463 Add support for NFS for file download
3464
wdenk074cff02004-02-24 00:16:43 +00003465* Patch by Andrea Scian, 17 Feb 2004:
3466 Add support for S3C44B0 processor and DAVE B2 board
3467
3468* Patch by Steven Scholz, 20 Feb 2004:
3469 - Add support for MII commands on AT91RM9200 boards
3470 - some cleanup in AT91RM9200 ethernet code
3471
wdenk028ab6b2004-02-23 23:54:43 +00003472* Patch by Peter Ryser, 20 Feb 2004:
3473 Add support for the Xilinx ML300 platform
3474
3475* Patch by Stephan Linz, 17 Feb 2004:
3476 Fix watchdog support for NIOS
3477
3478* Patch by Josh Fryman, 16 Feb 2004:
3479 Fix byte-swapping for cfi_flash.c for different bus widths
3480
3481* Patch by Jon Diekema, 14 Jeb 2004:
3482 Remove duplicate "FPGA Support" notes from the README file
3483
wdenk63e73c92004-02-23 22:22:28 +00003484* Patches by Reinhard Meyer, 14 Feb 2004:
3485 - update board/emk tree; use common flash driver
3486 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
3487 [adapted for other PPC CPUs -- wd]
3488 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
3489
3490* Patch by Jon Diekema, 13 Feb 2004:
3491 Call show_boot_progress() whenever POST "FAILED" is printed.
3492
3493* Patch by Nishant Kamat, 13 Feb 2004:
3494 Add support for TI OMAP1610 H2 Board
3495 Fixes for cpu/arm926ejs/interrupt.c
3496 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
3497 Fix for a timer bug in OMAP1610 Innovator
3498 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
3499
3500* Patches by Stephan Linz, 12 Feb 2004:
3501 - add support for NIOS timer with variable period preload counter value
3502 - prepare POST framework support for NIOS targets
3503
3504* Patch by Denis Peter, 11 Feb 2004:
3505 add POST support for the MIP405 board
3506
wdenkcd0a9de2004-02-23 20:48:38 +00003507* Patch by Laurent Mohin, 10 Feb 2004:
3508 Fix buffer overflow in common/usb.c
3509
3510* Patch by Tolunay Orkun, 10 Feb 2004:
3511 Add support for Cogent CSB272 board
3512
wdenk2d1a5372004-02-23 19:30:57 +00003513* Patch by Thomas Elste, 10 Feb 2004:
3514 Add support for NET+50 CPU and ModNET50 board
3515
3516* Patch by Sam Song, 10 Feb 2004:
3517 Fix typos in cfi_flash.c
3518
3519* Patch by Leon Kukovec, 10 Feb 2004
3520 Fixed long dir entry slot id calculation in get_vfatname
3521
3522* Patch by Robin Gilks, 10 Feb 2004:
3523 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
3524 !=, <>, <, >, <=, >=)
3525
wdenk3f85ce22004-02-23 16:11:30 +00003526* Fix problem with side effects in macros in include/usb.h
3527
3528* Patch by David Benson, 13 Nov 2003:
3529 bug 841358 - fix TFTP download size limit
3530
3531* Fixing bug 850768:
3532 improper flush_cache() in load_serial()
3533
3534* Fixing bug 834943:
3535 MPC8540 - missing volatile declarations
3536
3537* Patch by Stephen Williams, 09 Feb 2004:
3538 Add support for Xilinx SystemACE chip:
3539 - New files common/cmd_ace.c and include/systemace.h
3540 - Hook systemace support into cmd_fat and the partition manager
3541
3542* Patch by Travis Sawyer, 09 Feb 2004:
3543 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
3544
wdenk3c74e322004-02-22 23:46:08 +00003545* Patch by Travis Sawyer, 09 Feb 2004:
3546 o 440GX:
3547 - Fix PCI Indirect access for type 1 config cycles with ppc440.
3548 - Add phymode for 440 enet
3549 - fix pci pre init
3550 o XPedite1K:
3551 - Change board_pre_init to board_early_init_f
3552 - Add user flash to bus controller setup
3553 - Fix pci pre init
3554 - Fix is_pci_host to check GPIO for monarch bit
3555 - Force xpedite1k to pci conventional mode (via #define option)
3556
3557* Patch by Brad Kemp, 4 Feb 2004:
3558 - handle the machine check that is generated during the PCI scans
3559 on 82xx processors.
3560 - define the registers used in the IMMR by the PCI subsystem.
3561
3562* Patch by Pierre Aubert, 03 Feb 2004:
3563 cpu/mpc5xxx/start.S: copy MBAR into SPR311
3564
3565* Patch by Jeff Angielski, 03 Feb 2004:
3566 Fix copy & paste error in cpu/mpc8260/pci.c
3567
3568* Patch by Reinhard Meyer, 24 Jan 2004:
3569 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
3570
wdenkcf56e112004-02-20 22:02:48 +00003571* Add Auto-MDIX support for INCA-IP
3572
wdenkbf9e3b32004-02-12 00:47:09 +00003573* Some code cleanup
3574
3575* Patch by Josef Baumgartner, 10 Feb 2004:
Wolfgang Denk4af099b2006-05-09 13:49:12 +02003576 Fixes for ColdFire port
wdenkbf9e3b32004-02-12 00:47:09 +00003577
3578* Patch by Brad Kemp, 11 Feb 2004:
3579 Fix CFI flash driver problems
3580
wdenka2d18bb2004-02-11 21:35:18 +00003581* Make sure to use a bus clock divider of 2 only when running TQM8xxM
3582 modules at CPU clock frequencies above 66 MHz.
wdenkbf9e3b32004-02-12 00:47:09 +00003583
wdenka2d18bb2004-02-11 21:35:18 +00003584* Optimize flash programming speed for LWMON (by another 100% :-)
3585
wdenkcd37d9e2004-02-10 00:03:41 +00003586* Patch by Jian Zhang, 3 Feb 2004:
3587 - Changed the incorrect FAT12BUFSIZE
3588 - data_begin in fsdata can be negative. Changed it to be short.
3589
wdenkec4c5442004-02-09 23:12:24 +00003590* Patches by Stephan Linz, 30 Jan 2004:
3591 1: - board/altera/common/flash.c:flash_erase():
3592 o allow interrupts befor get_timer() call
3593 o check-up each erased sector and avoid unexpected timeouts
3594 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
3595 o enclose sevenseg_set() in cpp condition
3596 - remove the ASMI configuration for DK1S10_standard_32 (never present)
3597 - fix some typed in mistakes in the NIOS documentation
3598 2: - split DK1C20 configuration into several header files:
3599 o two new files for each NIOS CPU description
3600 o U-Boot related part is remaining in DK1C20.h
3601 3: - split DK1S10 configuration into several header files:
3602 o two new files for each NIOS CPU description
3603 o U-Boot related part is remaining in DK1S10.h
3604 4: - Add support for the Microtronix Linux Development Kit
3605 NIOS CPU configuration at the Altera Nios Development Kit,
3606 Stratix Edition (DK-1S10)
3607 5: - Add documentation for the Altera Nios Development Kit,
3608 Stratix Edition (DK-1S10)
3609 6: - Add support for the Nios Serial Peripharel Interface (SPI)
3610 (master only)
3611 7: - Add support for the common U-Boot SPI framework at
3612 RTC driver DS1306
3613
wdenkb98fff12004-02-09 20:51:26 +00003614* Patch by Rahul Shanbhag, 28 Jan 2004:
3615 Fix flash protection/locking handling for OMAP1610 innovator board.
3616
3617* Patch by Rolf Peukert, 28 Jan 2004:
3618 fix flash write problems on CSB226 board (write with 32 bit bus width)
3619
3620* Patches by Mark Jonas, 16 Jan 2004:
3621 - fix rounding error when calculating baudrates for MPC5200 PSCs
3622 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
3623 time which is not supported
3624
wdenk5653fc32004-02-08 22:55:38 +00003625* Patch by Yuli Barcohen, 26 Jan 2004:
3626 Allow bzip2 compression for small memory footprint boards
3627
3628* Patch by Brad Kemp, 21 Jan 2004:
3629 Add support for CFI flash driver for both the Intel and the AMD
3630 command sets.
3631
3632* Patch by Travis Sawyer, 20 Jan 2004:
3633 Fix pci bridge auto enumeration of sibling p2p bridges.
3634
3635* Patch by Tolunay Orkun, 12 Jan 2004:
3636 Add some delays as needed for Intel LXT971A PHY support
3637
3638* Patches by Stephan Linz, 09 Jan 2004:
3639 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
3640 - make DK1C20 board configuration related to ASMI conform to
3641 documentation
3642
wdenkf6e20fc2004-02-08 19:38:38 +00003643* Patch by Anders Larsen, 09 Jan 2004:
3644
3645 ARM memory layout fixes: the abort-stack is now set up in the
3646 correct RAM area, and the BSS is zeroed out as it should be.
3647
3648 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
3649 of the linker scripts are replaced by '__bss_start' and '_end',
3650 resp., which is a further step to eliminate unnecessary differences
3651 between the implementation of the CPU architectures.
3652
wdenkf4863a72004-02-07 01:27:10 +00003653* Patch by liang a lei, 9 Jan 2004:
3654 Fix Intel 28F128J3 ID in include/flash.h
3655
3656* Patch by Masami Komiya, 09 Jan 2004:
3657 add support for TB0229 board (NEC VR4131 MIPS processor)
3658
3659* Patch by Leon Kukovec, 12 Dec 2003:
3660 changed extern __inline__ into static __inline__ in
3661 include/linux/byteorder/swab.h
3662
wdenkba56f622004-02-06 23:19:44 +00003663* Patch by Travis Sawyer, 30 Dec 2003:
3664 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
3665 select MDI port based on enabled EMAC device.
3666 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
3667 base PrPMC board.
3668
wdenka6cccae2004-02-06 21:48:22 +00003669* Patch by Wolter Kamphuis, 15 Dec 2003:
3670 made CONFIG_SILENT_CONSOLE usable on all architectures
3671
3672* Disable date command on TQM866M - there is no RTC on MPC866
3673
wdenk75d1ea72004-01-31 20:06:54 +00003674* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
3675
wdenk68766092004-01-29 09:22:58 +00003676* Implement adaptive SDRAM timing configuration based on actual CPU
3677 clock frequency for INCA-IP; fix problem with board hanging when
3678 switching from 150MHz to 100MHz
3679
3680* Add PCMCIA CS support for BMS2003 board
3681
wdenkc178d3d2004-01-24 20:25:54 +00003682* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
3683 see doc/README.MPC866 for details;
3684 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
3685 calculate CPU clock frequency from PLL register values.
3686
3687* Add support for 128 MB RAM on TQM8xxL/M modules
3688
wdenkef978732004-01-21 20:46:28 +00003689* Fix PS/2 keyboard problem caused by statically initialized variable
3690 pointing to a location in flash
3691
3692* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
3693
wdenkc837dcb2004-01-20 23:12:12 +00003694* The PS/2 mux on the BMS2003 board needs 450 ms after power on
3695 before we can access it; add delay in case we are faster (with no
3696 CF card inserted)
3697
3698* Cleanup of some init functions
3699
3700* Make sure SCC Ethernet is always stopped by the time we boot Linux
3701 to avoid Linux crashes by early packets coming in.
3702
3703* Accelerate flash accesses on LWMON board by using buffered writes
3704
wdenkb0aef112004-01-18 18:21:54 +00003705* Fix typo in Makefile;
3706 fix problem with PARTNUM detection
3707
wdenk1c437712004-01-16 00:30:56 +00003708* Patch by Reinhard Meyer, 09 Jan 2004:
3709 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
3710
3711* Add support for IDE LED on BMS2003 board
3712 (exclusive with status LED!)
3713
3714* Add support for PS/2 keyboard (used with PS/2 multiplexor on
3715 BMS2003 board)
3716
3717* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
3718 Add common files for "emk" boards
3719
wdenkc83bf6a2004-01-06 22:38:14 +00003720* Add a common get_ram_size() function and modify the the
3721 board-specific files to invoke that common implementation.
3722
3723======================================================================
wdenkb34ff812004-01-06 11:13:56 +00003724Changes for U-Boot 1.0.1:
wdenk5cf9da42003-11-07 13:42:26 +00003725======================================================================
3726
wdenkb34ff812004-01-06 11:13:56 +00003727* Set default clock for INCA-IP to 150 MHz
3728
wdenka522fa02004-01-04 22:51:12 +00003729* Make BMS2003 use a separate config file to avoid #ifdef mess;
3730 add I2C support; add support for DS1337 RTC
3731
3732* Add CompactFlash support for BMS2003 board
3733
3734* Add support for status LED on BMS2003 board
3735
wdenk180d3f72004-01-04 16:28:35 +00003736* Patch by Scott McNutt, 02 Jan 2004:
3737 Add support for the Nios Active Serial Memory Interface (ASMI)
3738 on Cyclone devices
3739
3740* Patch by Andrea Marson, 16 Dec 2003:
3741 Add support for the PPChameleon ME and HI modules
3742
3743* Patch by Yuli Barcohen, 22 Dec 2003:
3744 Add support for Motorola DUET ADS board (MPC87x/88x)
3745
wdenkdd875c72004-01-03 21:24:46 +00003746* Patch by Robert Schwebel, 15 Dec 2003:
3747 add support for cramfs (uses JFFS2 command interface)
3748
wdenkc935d3b2004-01-03 19:43:48 +00003749* Patches by Stephan Linz, 11 Dec 2003:
3750 - more documentation for NIOS port
3751 - new struct nios_pio_t, struct nios_spi_t
3752 - Reconfiguration for NIOS Development Kit DK1C20:
3753 o move board related code from board/dk1c20
3754 to board/altera/dk1c20
3755 o create a new common source path board/altera/common
3756 and move generic flash access stuff into it
3757 o change/expand configuration file DK1C20.h
3758 - Add support for NIOS Development Kit DK1S10
3759 - Add status LED support for NIOS systems
3760 - Add dual 7-segment LED support for Altera NIOS DevKits
3761
wdenk3a473b22004-01-03 00:43:19 +00003762* Patch by Ronen Shitrit, 10 Dec 2003:
3763 Add support for the Marvell DB64360 / DB64460 development boards
3764
3765* Patch by Detlev Zundel, 10 Dec 2003:
3766 fix dependency problem in examples/Makefile
3767
wdenkb6e4c402004-01-02 16:05:07 +00003768* Patch by Denis Peter, 8 Dec 2003
3769 - add support for the PATI board (MPC555)
3770 - add SPI support for the MPC5xx
3771
3772* Patch by Anders Larsen, 08 Dec 2003:
3773 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
3774 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
3775 cleanup some redundand #defines
3776
wdenk63f34912004-01-02 15:01:32 +00003777* Patch by André Schwarz, 8 Dec 2003:
3778 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
3779 - TX and RX deskriptors must be quad-word aligned
3780 - does not work with only one TX deskriptor
3781 - standard reset method does not work
3782
3783* Patch by Masami Komiya, 08 Dec 2003:
3784 add RTL8139 ethernet driver
3785
3786* Patches by Ed Okerson, 07 Dec 2003:
3787 - fix ethernet for the AU1x00 processors in little-endian mode.
3788 - extend memsetup.S for the AU1x00 processors in BE and LE modes
3789
wdenkd4ca31c2004-01-02 14:00:00 +00003790* Minor code cleanup (coding style)
3791
3792* Patch by Reinhard Meyer, 30 Dec 2003:
3793 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
3794 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
3795 - turned debug print of PHY registers into a function (called in two places)
3796 - added support for EMK MPC5200 based modules
3797
3798* Fix MPC8xx PLPRCR_MFD_SHIFT typo
3799
3800* Add support for TQM866M modules
3801
3802* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
3803
3804* Fix a few compiler warnings
3805
wdenkc1896002003-12-28 11:44:59 +00003806* Patch by Reinhard Meyer, 28 Dec 2003:
3807 Add initial support for TOP5200 board
3808
wdenk7cb22f92003-12-27 19:24:54 +00003809* Make CPU clock on ICA-IP board controllable by a "cpuclk"
3810 environment variable which can set to "100", "133", or "150". The
3811 CPU clock will be configured accordingly upon next reboot. Other
3812 values are ignored. In case of an invalid or undefined "cpuclk"
3813 value, the compile-time default CPU clock speed will be used.
3814
3815* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
3816 window that is used to access the UART registers by the Linux driver)
3817
3818* Patch by Reinhard Meyer, 20 Dec 2003:
3819 Fix clock calculation for the MPC5200 for higher clock frequencies
3820 (above 2**32 / 10 = 429.5 MHz).
3821
3822* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
3823
wdenkb2001f22003-12-20 22:45:10 +00003824* Fix IceCube CLKIN configuration (it's 33.000000MHz)
3825
3826* Add new configuration for IceCube board with DDR memory
3827
3828* Update TRAB memory configurations
3829
wdenk5c745d22003-12-12 00:02:26 +00003830* Add JFFS2 support for INCA-IP board
3831
stroesed4f58f72003-12-09 15:04:55 +00003832* Patch by Bill Hargen, 09 Dec 2003:
3833 - BUBINGA405EP: changed flash driver to protect top sector containing
3834 first instruction.
3835 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
3836 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
3837 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
3838 - 405EP: added/fixed support for "reginfo" command.
3839 - 4xx: removed spurious MII error messages on "mii info" command.
3840
wdenk4e5ca3e2003-12-08 01:34:36 +00003841* Patch by Bernhard Kuhn, 28 Nov 2003:
Wolfgang Denk4af099b2006-05-09 13:49:12 +02003842 add support for ColdFire CPU
wdenk4e5ca3e2003-12-08 01:34:36 +00003843 add support for Motorola M5272C3 and M5282EVB boards
3844
wdenk9fd5e312003-12-07 23:55:12 +00003845* Patch by Pierre Aubert, 24 Nov 2003:
3846 - add a return value for the fpga command
3847 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
3848 is defined. If ide_preinit fails, ide_init is aborted.
3849 - fix an endianess problem in fat.h
3850
wdenk3bbc8992003-12-07 22:27:15 +00003851* Patch by Wolter Kamphuis, 05 Dec 2003:
3852 Add support for SNMC's QS850/QS823/QS860T boards
3853
wdenkb028f712003-12-07 21:39:28 +00003854* Patch by Yuli Barcohen, 3 Dec 2003:
3855 "revive" U-Boot support for old Motorola MPC860ADS board
3856
3857* Patch by Cam(ilo?), 03 Dec 2003:
3858 make examples build even with broken Montavista objcopy
3859
3860* Patch by Pavel Bartusek, 27 Nov 2003:
3861 fix conversion problem with "bootretry" evironment variable
3862
wdenkb4676a22003-12-07 19:24:00 +00003863* Patch by Andre Schwarz, 24 Nov 2003:
3864 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
3865
3866* Patch by Pavel Bartusek, 21 Nov 2003:
3867 set ZMII bridge speed on 440
3868
3869* Patch by Anders Larsen, 17 Nov 2003:
3870 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
3871
wdenka2663ea2003-12-07 18:32:37 +00003872* Patches by David Müller, 14 Nov 2003:
3873 - board/mpl/common/common_util.c
3874 * implement support for BZIP2 compressed images
3875 * various cleanups (printf -> puts, ...)
3876 - board/mpl/common/flash.c
3877 * report correct errors to upper layers
3878 * check the erase fail and VPP low bits in status reg
3879 - board/mpl/vcma9/cmd_vcma9.c
3880 - board/mpl/vcma9/flash.c
3881 * various cleanups (printf -> puts, ...)
3882 - common/cmd_usb.c
3883 * fix typo in comment
3884 - cpu/arm920t/usb_ohci.c
3885 * support for S3C2410 is missing in #if line
3886 - drivers/cs8900.c
3887 * reinit some registers in case of error (cable missing, ...)
3888 - fs/fat/fat.c
3889 * support for USB/MMC devices is missing in #if line
3890 - include/configs/MIP405.h
3891 - include/configs/PIP405.h
3892 * enable BZIP2 support
3893 * enlarge malloc space to 1MiB because of BZIP2 support
3894 - include/configs/VCMA9.h
3895 * enable BZIP2 support
3896 * enlarge malloc space to 1MiB because of BZIP2 support
3897 * enable USB support
3898 - lib_arm/armlinux.c
3899 * change calling convention of ARM Linux kernel as
3900 described on http://www.arm.linux.org.uk/developer/booting.php
3901
3902* Patch by Thomas Lange, 14 Nov 2003:
3903 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
3904 support all these AMD boards.
3905
3906* Patch by Thomas Lange, 14 Nov 2003:
3907 Workaround for mips au1x00 physical memory accesses (the au1x00
3908 uses a 36 bit bus internally and cannot access physical memory
3909 directly. Use the uncached SDRAM address instead of the physical
3910 one.)
3911
wdenkef5a9672003-12-07 00:46:27 +00003912* Patch by Xue Ligong (Joe), 13 Nov 2003:
3913 add Realtek 8019 ethernet driver
3914
3915* Patch by Yuli Barcohen, 13 Nov 2003:
3916 MPC826xADS/PQ2FADS cleanup
3917
3918* Patch by Anders Larsen, 12 Nov 2003:
3919 Update README to mark the PORTIO commands non-standard
3920
wdenk5779d8d2003-12-06 23:55:10 +00003921* Patch by Nicolas Lacressonnière, 12 Nov 2003:
3922 update for for Atmel AT91RM9200DK development kit:
3923 - support for environment variables in DataFlash
3924 - Atmel DataFlash AT45DB1282 support
3925
3926* Patch by Jeff Carr, 11 Nov 2003:
3927 add support for new version of 8270 processors
3928
3929* Patches by George G. Davis, 05 Nov 2003:
3930 - only pass the ARM linux initrd tag to the kernel when an initrd
3931 is actually present
3932 - update omap1510inn configuration file
3933
wdenk8bf3b002003-12-06 23:20:41 +00003934* Patches by Stephan Linz, 3 Nov 2003:
3935 - more endianess fixes for LAN91C111 driver
3936 - CFG_HZ configuration patch for NIOS Cyclone board
3937
3938* Patch by Stephan Linz, 28 Oct 2003:
3939 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
3940
3941* Patch by Steven Scholz, 20 Oct 2003:
3942 - make "mii info <addr>" show infor for PHY at "addr" only
3943 - Endian fix for miiphy_info()
3944
wdenka8c7c702003-12-06 19:49:23 +00003945* Patch by Gleb Natapov, 19 Sep 2003:
3946 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
3947
3948* Patch by Anders Larsen, 17 Sep 2003:
3949 Bring ARM memory layout in sync with the documentation:
3950 stack and malloc-heap are now located _below_ the U-Boot code
3951
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02003952* Accelerate booting on TRAB board: read and check autoupdate image
wdenkfa1399e2003-12-06 11:20:01 +00003953 headers first instead of always reading the whole images.
3954
wdenkb96619a2003-12-05 21:08:38 +00003955* Fix type in MPC5XXX code (pointed out by Victor Wren)
3956
wdenkaf6d1df2003-12-03 23:53:42 +00003957* Enabled password check on RMU board
3958
3959* Fix configuration problem with IceCube in LOWBOOT configuration:
3960 envrionment got embedded, corrupting the image layout.
3961
3962* Fix NEC display names (it's 6440 [for 640x480], not 6640).
3963
wdenkfd3103b2003-11-25 16:55:19 +00003964* Added BMS2003 board
3965 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
3966
wdenkb4757ce2003-11-17 21:45:27 +00003967* Fix flash driver for TRAB board (must use Unlock Bypass Reset
3968 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
3969 and CPLD
3970
wdenk5bb226e2003-11-17 21:14:37 +00003971* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
3972 recent tools
3973
3974* Add checksum verification to 'imls' command
3975
3976* Add bd_info fields needed for 4xx Linux I2C driver
3977
3978* Patch by Martin Krause, 4 Nov. 2003:
3979 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
3980
3981* Print used network interface when CONFIG_NET_MULTI is set
3982
wdenk5cf9da42003-11-07 13:42:26 +00003983* Patch by Bernhard Kuhn, 28 Oct 2003:
3984 Add low boot support for MPC5200
3985
3986* Fix problem with dual PCMCIA support (NSCU)
3987
3988* Fix MPC5200 I2C initialization function
3989
3990======================================================================
wdenka43278a2003-09-11 19:48:06 +00003991Changes for U-Boot 1.0.0:
3992======================================================================
3993
wdenkb13fb012003-10-30 21:49:38 +00003994* Fix parameter passing to standalone images with bootm command
3995
3996* Patch by Kyle Harris, 30 Oct 2003:
3997 Fix build errors for ixdp425 board
3998
3999* Patch by David M. Horn, 29 Oct 2003:
4000 Fixes to build under CYGWIN
4001
4002* Get IceCube MGT5100 working (again)
4003
wdenk5fa66df2003-10-29 23:18:55 +00004004* Fix problems in memory test on some boards (which was not
4005 non-destructive as intended)
4006
4007* Patch by Gary Jennejohn, 28 Oct 2003:
4008 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
4009 to prevent stack overflow on ARM systems
4010
wdenka0f2fe52003-10-28 09:14:21 +00004011* Patch by Stephan Linz, 28 Oct 2003:
4012 fix init sequence error for NIOS port
4013
4014* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
4015
4016* Add CONFIG_VERSION_VARIABLE to TRAB configuration
4017
wdenka57a4962003-10-26 22:52:58 +00004018* Patch by Xiao Xianghua, 23 Oct 2003:
4019 small patch for mpc85xx
4020
4021* Fix small problem in MPC5200 I2C driver
4022
4023* Fix FCC3 support on ATC board
4024
dzu8cb81432003-10-24 13:14:45 +00004025* Correct header printing for multi-image files in do_bootm()
4026
4027* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
4028
wdenk4654af22003-10-22 09:00:28 +00004029* Fix PCI problems on PPChameleon board
4030
wdenka3ad8e22003-10-19 23:22:11 +00004031* Patch by Steven Scholz, 18 Oct 2003:
4032 Fix AT91RM9200 ethernet driver
4033
4034* Patch by Nye Liu, 17 Oct 2003:
4035 Fix typo in include/mpc8xx.h
4036
4037* Patch by Richard Woodruff, 16 Oct 03:
4038 Fixes for cpu/arm925/interrupt.c
4039 - Initialize timestamp & lastdec vars.
4040 - fix timestamp overflows.
4041 - fix lastdec overflow.
4042 - smarter normalization to allow udelay() below 1ms to work.
4043
4044* Patch by Scott McNutt, 16 Oct
4045 add networking support for the Altera Nios Development Kit,
4046 Cyclone Edition (DK-1C20)
4047
4048* Patch by Jon Diekema, 14 Oct 2003:
4049 add hint about doc/README.silent to README file
4050
dzue7df0292003-10-19 21:43:26 +00004051* Add CompactFlash support for NSCU
4052
wdenkd7281f42003-10-19 22:30:08 +00004053* Fix PCI problems on PPChameleonEVB
4054
wdenk3d1e8a92003-10-16 12:53:35 +00004055* TRAB auto-update: Base decision if we have to strip the image
4056 header on image type as encoded in the header
wdenkd7281f42003-10-19 22:30:08 +00004057 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk3d1e8a92003-10-16 12:53:35 +00004058
wdenk42d1f032003-10-15 23:53:47 +00004059* Patches by Xianghua Xiao, 15 Oct 2003:
4060
4061 - Added Motorola CPU 8540/8560 support (cpu/85xx)
4062 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
4063 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
4064
4065* Fix flash timings on TRAB board
4066
wdenk2d5b5612003-10-14 19:43:55 +00004067* Make sure HUSH is initialized for running auto-update scripts
4068
4069* Make 5200 reset command _really_ reset the board, without running
4070 any other code after it
4071
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02004072* Fix errors with flash erase when range spans across banks
wdenk2d5b5612003-10-14 19:43:55 +00004073 that are mapped in reverse order
4074
4075* Fix flash mapping and display on P3G4 board
4076
4077* Patch by Kyle Harris, 15 Jul 2003:
4078 - add support for Intel IXP425 CPU
4079 - add support for IXDP425 eval board
4080
wdenkf72da342003-10-10 10:05:42 +00004081* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
4082 for more information
4083
wdenk5da627a2003-10-09 20:09:04 +00004084* Patch by Steven Scholz, 10 Oct 2003
4085 - Add support for Altera FPGA ACEX1K
4086
wdenk15647dc2003-10-09 19:00:25 +00004087* Patches by Thomas Lange, 09 Oct 2003:
4088 - fix cmd_ide.c for non ppc boards (read/write functions did not
4089 add ATA base address)
4090 - fix for shannon board
4091 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk5da627a2003-10-09 20:09:04 +00004092 - Endian swap ATA identity for all big endian CPUs, not just PPC
4093 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
4094 args to linux
4095 - add support for dbau1x00 board (MIPS32)
wdenk15647dc2003-10-09 19:00:25 +00004096
4097* Patch by Sangmoon Kim, 07 Oct 2003:
4098 add support for debris board
4099
wdenka0ff7f22003-10-09 13:16:55 +00004100* Patch by Martin Krause, 09 Oct 2003:
4101 Fixes for TRAB board
4102 - /board/trab/rs485.c: correct baudrate
wdenk42d1f032003-10-15 23:53:47 +00004103 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenka0ff7f22003-10-09 13:16:55 +00004104 udelay(); fix some timing problems with adc controller
4105 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
4106 modify commands: touch and buzzer
4107
4108* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
4109 (quick & dirty workaround for rogue pointer problem in get_vfatname());
4110 Use direct function calls for auto_update instead of hush commands
4111
wdenk4a551702003-10-08 23:26:14 +00004112* Patch by Scott McNutt, 04 Oct 2003:
4113 - add support for Altera Nios-32 CPU
4114 - add support for Nios Cyclone Development Kit (DK-1C20)
4115
4116* Patch by Steven Scholz, 29 Sep 2003:
4117 - A second parameter for bootm overwrites the load address for
4118 "Standalone Application" images.
4119 - bootm sets environment variable "filesize" to the resulting
4120 (uncompressed) data length for "Standalone Application" images
4121 when autostart is set to "no". Now you can do something like
4122 if bootm $fpgadata $some_free_ram ; then
4123 fpga load 0 $some_free_ram $filesize
4124 fi
4125
4126* Patch by Denis Peter, 25 Sept 2003:
4127 add support for the MIP405 Rev. C board
4128
wdenk54387ac2003-10-08 22:45:44 +00004129* Patch by Yuli Barcohen, 25 Sep 2003:
4130 add support for Zephyr Engineering ZPC.1900 board
4131
4132* Patch by Anders Larsen, 23 Sep 2003:
4133 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
4134 implemented for the x86 architecture)
4135
wdenkfc3e2162003-10-08 22:33:00 +00004136* Patch by Sangmoon Kim, 23 Sep 2003:
4137 fix pll_pci_to_mem_multiplier table for MPC8245
4138
4139* Patch by Anders Larsen, 22 Sep 2003:
4140 enable timed autoboot on PXA
4141
4142* Patch by David Müller, 22 Sep 2003:
wdenkfc3e2162003-10-08 22:33:00 +00004143 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
4144 returns correct libgcc file path
4145 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
4146 time on s3c24x0 systems
4147
4148* Patch by Jon Diekema, 19 Sep 2003:
4149 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
4150 link state to the fault LED.
4151 - In NetLoop, make the Fault LED reflect the link status. The link
4152 status gets updated on entry, and on timeouts.
wdenk42d1f032003-10-15 23:53:47 +00004153
wdenkef1464c2003-10-08 22:14:02 +00004154* Patch by Anders Larsen, 18 Sep 2003:
4155 allow mkimage to build and run on Cygwin-hosted systems
4156
4157* Patch by Frank Müller, 18 Sep 2003:
4158 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
4159 cpu/mpc8xx/fec.c
4160
4161* Patch by Pantelis Antoniou, 16 Sep 2003:
4162 add tool to compute fileds in the PLPRCR register for MPC86x
4163
wdenkd9a405a2003-10-07 20:01:55 +00004164* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
4165
wdenk147031a2003-10-07 10:33:38 +00004166* Fix build problems under FreeBSD
4167
wdenk887b3722003-10-06 22:00:45 +00004168* Add generic filesystem image type
4169
wdenkfbe4b5c2003-10-06 21:55:32 +00004170* Make fatload set filesize environment variable
4171
4172* enable basic / medium / high-end configurations for PPChameleonEVB
4173 board; fix NAND code
4174
4175* enable TFTP client code to specify to the server the desired
4176 timeout value (see RFC-2349)
4177
dzubb65a312003-09-30 15:22:12 +00004178* Improve SDRAM setup for TRAB board
4179
dzu88a1bfa2003-09-30 15:11:43 +00004180* Suppress all output with splashscreen configured only if "splashimage"
4181 is set
4182
dzucad07372003-09-30 14:36:51 +00004183* Fix problems with I2C support for mpc5200
4184
dzu8a42eac2003-09-29 21:55:54 +00004185* Adapt TRAB configuration and auto_update to new memory layout
4186
dzu91e940d2003-09-25 22:32:40 +00004187* Add configuration for wtk board
4188
dzu29127b62003-09-25 22:30:12 +00004189* Add support for the Sharp LQ065T9DR51U LCD display
4190
wdenk206c60c2003-09-18 10:02:25 +00004191* Patch by Rune Torgersen, 17 Sep 2003:
4192 - Fixes for MPC8266 default config
wdenk65bd0e22003-09-18 10:45:21 +00004193 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk206c60c2003-09-18 10:02:25 +00004194
4195* Patches by Jon Diekema, 17 Sep 2003:
4196 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
4197 env_common.c)
4198 - sbc8260 tweaks
4199 - adjust "help" output
4200
wdenk5f535fe2003-09-18 09:21:33 +00004201* Patches by Anders Larsen, 17 Sep 2003:
4202 - fix spelling errors
4203 - set GD_FLG_DEVINIT flag only after device function pointers
4204 are valid
4205 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
4206 writeable
4207 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
4208 - trigger watchdog while waiting in serial driver
4209
wdenkb0639ca2003-09-17 22:48:07 +00004210* Add auto-update code for TRAB board using USB memory sticks,
4211 support new configuration with more memory
wdenkf54ebdf2003-09-17 15:10:32 +00004212
wdenkef709e92003-09-16 17:35:37 +00004213* disable MPC5200 bus pipelining as workaround for bus contention
4214
wdenk4aeb2512003-09-16 17:06:05 +00004215* Modify XLB arbiter priorities on MPC5200 so all devices use same
4216 priority; configure critical interrupts to be handled like external
4217 interrupts
4218
wdenkacf98e72003-09-16 11:39:10 +00004219* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
4220 go back to 66 MHz for stability
4221
wdenk78137c32003-09-15 18:00:00 +00004222* Patches by Jon Diekema, 15 Sep 2003:
4223 - add description for missing CFG_CMD_* entries in the README file
4224 - sacsng tweaks
4225
wdenk35656de2003-09-14 19:08:39 +00004226* Patch by Gleb Natapov, 14 Sep 2003:
4227 enable watchdog support for all MPC824x boards that have a watchdog
4228
4229* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
4230 "Non-octet Aligned Frame" errors we see at 100 Mbps
4231
4232* Patch by Sharad Gupta, 14 Sep 2003:
4233 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
4234
wdenk200f8c72003-09-13 19:13:29 +00004235* Patch by llandre, 11 Sep 2003:
4236 update configuration for PPChameleonEVB board
4237
wdenk531716e2003-09-13 19:01:12 +00004238* Patch by David Müller, 13 Sep 2003:
4239 various changes to VCMA9 board specific files
4240
4241* Add I2C support for MGT5100 / MPC5200
4242
wdenkb70e7a02003-09-12 20:09:09 +00004243* Patch by Rune Torgersen, 11 Sep 2003:
4244 Changed default memory option on MPC8266ADS to NOT be Page Based
4245 Interleave, since this doesn't work very well with the standard
4246 16MB DIMM
4247
4248* Patch by George G. Davis, 12 Sep 2003:
4249 fix Makefile settings for sk98 driver
4250
stroese68ce8952003-09-12 08:57:52 +00004251* Patch by Stefan Roese, 12 Sep 2003:
4252 - new boards added: DP405, HUB405, PLU405, VOH405
4253 - some esd boards updated
4254 - cpu/ppc4xx/sdram.c: disable memory controller before setting
4255 first values
4256 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
4257
wdenk4f7cb082003-09-11 23:06:34 +00004258* Patch by Martin Krause, 11 Sep 2003:
4259 add burn-in tests for TRAB board
4260
4261* Enable instruction cache on MPC5200 board
4262
wdenka43278a2003-09-11 19:48:06 +00004263* Patch by Denis Peter, 11 Sep 2003:
4264 - fix USB data pointer assignment for bulk only transfer.
4265 - prevent to display erased directories in FAT filesystem.
4266
4267* Change output format for NAND flash - make it look like for other
4268 memory, too
4269
4270======================================================================
wdenk149dded2003-09-10 18:20:28 +00004271Changes for U-Boot 0.4.8:
wdenkd94f92c2003-08-28 09:41:22 +00004272======================================================================
4273
dzu29127b62003-09-25 22:30:12 +00004274* Add I2C and RTC support for RMU board
4275
wdenk7205e402003-09-10 22:30:53 +00004276* Patches by Denis Peter, 9 Sep 2003:
4277 add FAT support for IDE, SCSI and USB
4278
4279* Patches by Gleb Natapov, 2 Sep 2003:
4280 - cleanup of POST code for unsupported architectures
4281 - MPC824x locks way0 of data cache for use as initial RAM;
4282 this patch unlocks it after relocation to RAM and invalidates
4283 the locked entries.
4284
4285* Patch by Gleb Natapov, 30 Aug 2003:
4286 new I2C driver for mpc107 bridge. Now works from flash.
4287
4288* Patch by Dave Ellis, 11 Aug 2003:
4289 - JFFS2: fix typo in common/cmd_jffs2.c
4290 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
4291 - JFFS2: remove node version 0 warning
4292 - JFFS2: accept JFFS2 PADDING nodes
4293 - SXNI855T: add AM29LV800 support
4294 - SXNI855T: move environment from EEPROM to flash
4295 - SXNI855T: boot from JFFS2 in NOR or NAND flash
4296
4297* Patch by Bill Hargen, 11 Aug 2003:
4298 fixes for I2C on MPC8240
4299 - fix i2c_write routine
4300 - fix iprobe command
4301 - eliminates use of global variables, plus dead code, cleanup.
4302
wdenk149dded2003-09-10 18:20:28 +00004303* Add support for USB Mass Storage Devices (BBB)
4304 (tested with USB memory sticks only)
4305
4306* Avoid flicker on TRAB's VFD
4307
wdenk7152b1d2003-09-05 23:19:14 +00004308* Add support for SK98xx driver
4309
4310* Add PCI support for SL8245 board
4311
4312* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
4313 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
4314 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
4315
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02004316* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
wdenk7152b1d2003-09-05 23:19:14 +00004317 to allow for more accurate baudrate settings
4318 (error now 0.7% at 115 kbps, instead of 3.5% before)
4319
4320* Patch by Andreas Mohr, 4 Sep 2003:
4321 Fix a lot of spelling errors
4322
wdenk12f34242003-09-02 22:48:03 +00004323* Add support for PPChameleon Eval Board
4324
4325* Add support for P3G4 board
4326
4327* Fix problem with MGT5100 FEC driver: add "early" MAC address
4328 initialization
4329
wdenk326428c2003-08-31 18:37:54 +00004330* Patch by Yuli Barcohen, 7 Aug 2003:
4331 check BCSR to detect if the board is configured in PCI mode
4332
wdenk149dded2003-09-10 18:20:28 +00004333======================================================================
4334Changes for U-Boot 0.4.7:
4335======================================================================
4336
wdenk0cb61d72003-08-30 00:05:50 +00004337* Patch by Raghu Krishnaprasad, 7 Aug 2003:
4338 add support for Adder II MPC852T module
4339
wdenk6f213472003-08-29 22:00:43 +00004340* Patch by George G. Davis, 19 Aug 2003:
4341 fix TI Innovator/OMAP1510 pin configs
4342
4343* Patches by Kshitij, 18 Aug 2003
4344 - add support for arm926ejs cpu core
4345 - add support for TI OMAP 1610 Innovator Board
4346
wdenkc29fdfc2003-08-29 20:57:53 +00004347* Patch by Yuli Barcohen, 14 Aug 2003:
4348 add support for bzip2 uncompression
4349
4350* Add GCC library to examples/Makefile so GCC utility functions will
4351 be resolved, too
4352
wdenkca75add2003-08-29 10:05:53 +00004353* Add I2C and RTC support for RMU board using software I2C driver
4354 (because of better response to iprobe command); fix problem with
4355 "reset" command
4356
stroese437ce072003-08-28 14:24:37 +00004357* Patch by Matthias Fuchs, 28 Aug 2003:
4358 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
4359 CONFIG_BOOTP_MAKS (see README).
4360
wdenkd94f92c2003-08-28 09:41:22 +00004361* Fix ICU862 environment problem
4362
4363* Fix RAM size detection for RMU board
4364
4365* Implement "reset" for MGT5100/MPC5200 systems
4366
4367======================================================================
4368Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +00004369======================================================================
4370
wdenke0ac62d2003-08-17 18:55:18 +00004371* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
4372 allow selection of clock frequency as "make" target
4373
4374* Implement memory autosizing code for IceCube boards
4375
4376* Configure network port on INCA-IP for autonegotiation
4377
4378* Fix overflow problem in network timeout code
4379
4380* Patch by Richard Woodruff, 8 Aug 2003:
4381 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
4382
wdenkd94f92c2003-08-28 09:41:22 +00004383======================================================================
4384Changes for U-Boot 0.4.5:
4385======================================================================
4386
wdenkae3af052003-08-07 22:18:11 +00004387* Update for TQM board defaults:
4388 disable clocks_in_mhz, enable boot count limit
4389
dzu9374fa22003-08-07 15:04:48 +00004390* Removed tools/gdb from "make all" target. Added make target "gdbtools"
4391 in toplevel directory instead. Removed astest.c from tools/gdb because
4392 it is no longer relevant.
4393
wdenk96e48cf2003-08-05 18:22:44 +00004394* Fix PCI support for MPC5200 / IceCube Board
4395
wdenkbdccc4f2003-08-05 17:43:17 +00004396* Map ISP1362 USB OTG controller for NSCU board
4397
4398* Patch by Brad Parker, 02 Aug 2003:
4399 fix sc520_cdp problems
4400
4401* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
4402
4403* Allow erase command to cross flash bank boundaries
4404
wdenk1f4bb372003-07-27 00:21:01 +00004405* Patch by Scott McNutt, 21 Jul 2003:
4406 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
4407 Both LynxOS and BlueCat linux KDIs are supported.
4408
4409* Patch by Richard Woodruff, 25 Jul 2003:
4410 use more reliable reset for OMAP/925T
4411
4412* Patch by Nye Liu, 25 Jul 2003:
4413 fix typo in mpc8xx.h
4414
4415* Patch by Richard Woodruff, 24 Jul 2003:
4416 Fixes for cmd_nand.c:
4417 - Fixed null dereferece which could result in incorrect ECC values.
4418 - Added support for devices with no Ready/Busy signal hooked up.
4419 - Added OMAP1510 read/write protect handling.
4420 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
4421 for non-JFFS2.
4422 - Switched default ECC to be JFFS2.
4423
wdenk77846742003-07-26 08:08:08 +00004424* Allow crc32 to be used at address 0x000
4425
4426* Provide consistent interface to standalone applications to access
4427 the 'global_data' structure
4428 Provide a doc/README.standalone more useful to users/developers.
4429
4430* Make IceCube MGT5100 FEC driver work
4431
wdenk27b207f2003-07-24 23:38:38 +00004432* Implement new mechanism to export U-Boot's functions to standalone
4433 applications: instead of using (PPC-specific) system calls we now
4434 use a jump table; please see doc/README.standalone for details
4435
4436* Patch by Dave Westwood, 24 Jul 2003:
4437 added support for Unity OS (a proprietary OS)
4438
4439* Patch by Detlev Zundel, 23 Jul 2003:
4440 add "imls" command to print flash table of contents
4441
4442* Fix cold boot detection for log buffer reset
4443
4444* Return error for invalid length specifiers with "cp.X" etc.
4445
4446* Fix startup problem on MIPS
4447
4448* Allow for CONFIG_SPLASH_SCREEN even when no explicit
4449 bitmap support is configured
4450
4451* Patch by Bill Hargen, 18 Jul 2003:
4452 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
4453
4454* Patch by Denis Peter, 18 Jul 2003:
4455 - fix memory configuration for MIP405T
4456 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
4457
4458* Cleanup of TQM82xx configurations; use "official" board types
4459 to make selection easier.
4460
wdenk2535d602003-07-17 23:16:40 +00004461* Patch by Martin Krause, 17 Jul 2003:
4462 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
4463
4464* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +00004465 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +00004466
4467* Patch by Nye Liu, 16 July 2003:
4468 MPC860FADS fixes:
4469 - add MPC86xADS support (uses MPC86xADS.h)
4470 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
4471 o PLPRCR changes
4472 o BRG changes (EXTAL/XTAL restricted to 10MHz)
4473 o don't trust gclk() software measurement by default, depend on
4474 CONFIG_8xx_GCLK_FREQ
4475 - add DRAM SIMM not installed detection
4476 - use more "correct" SDRAM initialization sequence
4477 - allow different SDRAM sizes (8xxADS has 8M)
4478 - default DER is 0
4479 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
4480 - rename MAMR/MBMR defines to be more consistent. Should eventually
4481 be merged into MxMR to better reflect the PowerQUICC datasheet.
4482
4483* Patch by Yuli Barcohen, 16 Jul 2003:
4484 support new Motorola PQ2FADS-ZU evaluation board which replaced
4485 MPC8260ADS and MPC8266ADS
4486
4487======================================================================
wdenk945af8d2003-07-16 21:53:01 +00004488Changes for U-Boot 0.4.4:
4489======================================================================
4490
4491* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
4492
4493* Add support for MGT5100 and MPC5200 processors
4494
4495* Patch by Lutz Dennig, 15 Jul 2003:
4496 update for R360MPI board
4497
4498======================================================================
wdenk8564acf2003-07-14 22:13:32 +00004499Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +00004500======================================================================
4501
wdenk2e5983d2003-07-15 20:04:06 +00004502* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +00004503 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +00004504 - added support for TI OMAP 1510 Innovator Board
4505
wdenk6dff5522003-07-15 07:45:49 +00004506* Patches by Martin Krause, 14 Jul 2003:
4507 - add I2C support for s3c2400 systems (trab board)
4508 - (re-) add "ping" to command table
4509
4510* Fix handling of "slow" POST routines
4511
wdenk8564acf2003-07-14 22:13:32 +00004512* Patches by Yuli Barcohen, 13 Jul 2003:
4513 - Correct flash and JFFS2 support for MPC8260ADS
4514 - fix PVR values and clock generation for PowerQUICC II family
4515 (8270/8275/8280)
4516
4517* Patch by Bernhard Kuhn, 08 Jul 2003:
4518 - add support for M68K targets
4519
4520* Patch by Ken Chou, 3 Jul:
4521 - Fix PCI config table for A3000
4522 - Fix iobase for natsemi.c
4523 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +00004524
wdenk8564acf2003-07-14 22:13:32 +00004525* Allow to enable "slow" POST routines by key press on power-on
4526* Fix temperature dependend switching of LCD backlight on LWMON
4527* Tweak output format for LWMON
4528
stroese57029232003-07-11 08:23:12 +00004529* Patch by Stefan Roese, 11 Jul 2003:
4530 - Fix bug in CONFIG_VERSION_VARIABLE.
4531 - AR405 config updated.
4532 - OCRTC/ORSG: bsp command added.
4533 - ASH405 bsp update.
4534
wdenk8564acf2003-07-14 22:13:32 +00004535======================================================================
4536Changes for U-Boot 0.4.2:
4537======================================================================
4538
wdenkf12e5682003-07-07 20:07:54 +00004539* Add support for NSCU board
4540
4541* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
4542
4543* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
4544 mirror bit flash on TQM8xxM modules
4545
wdenk0d498392003-07-01 21:06:45 +00004546* Patch by Kenneth Johansson, 30 Jun 2003:
4547 get rid of MK_CMD_ENTRY macro; update doc/README.command
4548
wdenkb37c7e52003-06-30 16:24:52 +00004549* Patch by Seb James, 30 Jun 2003:
4550 Improve documentation of I2C configuration in README
4551
4552* Fix problems with previous log buffer "fixes"
4553
4554* Fix minor help text issues
4555
4556* "log append" did not append a newline
4557
4558======================================================================
wdenkb0fce992003-06-29 21:03:46 +00004559Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +00004560======================================================================
4561
wdenkb0fce992003-06-29 21:03:46 +00004562* Fix some missing commands, cleanup header files
4563 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
4564
wdenk9d2b18a2003-06-28 23:11:04 +00004565* Rewrite command lookup and help command (fix problems with bubble
4566 sort when sorting command name list). Minor cleanup here and there.
4567
wdenkd1cbe852003-06-28 17:24:46 +00004568* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
4569 - Allow to call sysmon function interactively
4570 - PIC on LWMON board needs delay after power-on
4571 - Add missing RSR definitions for MPC8xx
4572 - Improve log buffer handling: guarantee clean reset after power-on
wdenk149dded2003-09-10 18:20:28 +00004573 - Add support for EXBITGEN board (aka "genie")
wdenkd1cbe852003-06-28 17:24:46 +00004574 - Add support for SL8245 board
4575
wdenk8bde7f72003-06-27 21:31:46 +00004576* Code cleanup:
4577 - remove trailing white space, trailing empty lines, C++ comments, etc.
4578 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
4579
4580* Patches by Kenneth Johansson, 25 Jun 2003:
4581 - major rework of command structure
4582 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
4583
4584======================================================================
4585Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +00004586======================================================================
4587
wdenk993cad92003-06-26 22:04:09 +00004588* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +00004589 - csb226 configuration updated
4590 - credits for logodl port updated
4591 - innokom configuration updated
4592 - logodl tree update, still with coding style inconsistencies
4593 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +00004594
4595* Patch by Pantelis Antoniou, 25 Jun 2003:
4596 update NetVia with V2 board support
4597
wdenkb783eda2003-06-25 22:26:29 +00004598* Header file cleanup for ARM
4599
4600* Patch by Murray Jensen, 24 Jun 2003:
4601 - make sure to use only U-boot provided header files
4602 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
4603
stroesea300d832003-06-24 14:32:24 +00004604* Patch by Stefan Roese, 24 Jun 2003:
4605 - Update esd ASH405 board files.
4606 - Update esd DASA_SIM config file.
4607 - Add ping command to some esd boards.
4608
wdenkcceb8712003-06-23 18:12:28 +00004609* Patch by Yuli Barcohen, 23 Jun 2003:
4610 Update for MPC8260ADS board
4611
4612* Patch by Murray Jensen, 23 Jun 2003:
4613 - cleanup of GCC 3.x compiler warnings
4614
wdenk3595ac42003-06-22 17:18:28 +00004615* Patch by Rune Torgersen, 4 Jun 2003:
4616 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +00004617
wdenk3595ac42003-06-22 17:18:28 +00004618* Patch by Richard Woodruff, 19 June 03:
4619 - Enabled standard u-boot device abstraction for ARM
4620 - Enabled console device for ARM
4621 - Initilized bi_baudrate for ARM
4622
4623* Patch by Bill Hargen, 23 Apr 2003:
4624 fix byte order for 824x I2C addresses (write op)
4625
wdenk592c5ca2003-06-21 00:17:24 +00004626* Patch by Murray Jensen, 20 Jun 2003:
4627 - hymod update
4628 - cleanup (especially for gcc-3.x compilers)
4629
wdenk72755c72003-06-20 23:10:58 +00004630* Patch by Tom Guilliams, 20 Jun 2003:
4631 added CONFIG_750FX support for IBM 750FX processors
4632
wdenk03329902003-06-20 22:36:30 +00004633* Patch by Devin Crumb, 02 Apr 2003:
4634 Fix clock divider rounding problem in drivers/serial.c
4635
4636* Patch by Richard Woodruff, 19 June 03:
4637 - Fixed smc91c111 driver to sync with the u-boot environment
4638 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +00004639 - Added eth_init error return check in NetLoop (net/net.c).
4640
wdenk03329902003-06-20 22:36:30 +00004641* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +00004642 Added support for A3000 SBC board (Artis Microsystems Inc.)
4643
wdenk6dd652f2003-06-19 23:40:20 +00004644* Patches by Murray Jensen, 17 Jun 2003:
4645 - Hymod board database mods: add "who" field and new xilinx chip types
4646 - provide new "init_cmd_timeout()" function so code external to
4647 "common/main.c" can use the "reset_cmd_timeout()" function before
4648 entering the main loop
4649 - add DTT support for adm1021 (new file dtt/adm1021.c; config
4650 slightly different. see include/configs/hymod.h for an example
4651 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
4652 CFG_DTT_ADM1021 defined)
4653 - add new "eeprom_probe()" function which has similar args and
4654 behaves in a similar way to "eeprom_read()" etc.
4655 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
4656 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
4657 - gdbtools copyright update
4658 - ensure that set_msr() executes the "sync" and "isync" instructions
4659 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
4660 - 8260 I/O ports fix: Open Drain should be set last when configuring
4661 - add SIU IRQ defines for 8260
4662 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
4663 config.mk to allow board configurations to override the GNU
4664 linker script, selected via the LDSCRIPT, make variable, and to
4665 give an initial value to the OBJCFLAGS make variable
4666 - 8260 i2c enhancement:
4667 o correctly extends the timeout depending on the size of all
4668 queued messages for both transmit and receive
4669 o will not continue with receive if transmit times out
4670 o ensures that the error callback is done for all queued tx
4671 and rx messages
4672 o correctly detects both tx and rx timeouts, only delivers one to
4673 the callback, and does not overwrite an earlier error
4674 o logic in i2c_probe now correct
4675 - add "vprintf()" function so that "panic()" function can be
4676 technically correct
4677 - many Hymod board changes
4678
wdenk52f52c12003-06-19 23:04:19 +00004679* Patches by Robert Schwebel, 14 Jun 2003:
4680 - add support for Logotronic DL datalogger board
4681 - cleanup serial line after kermit binary download
4682 - add debugX macro (debug level support)
4683 - update mach-types.h to latest arm.linux.org.uk master list.
4684
wdenk48b42612003-06-19 23:01:32 +00004685* Patches by David Müller, 12 Jun 2003:
4686 - rewrite of the S3C24X0 register definitions stuff
4687 - "driver" for the built-in S3C24X0 RTC
4688
4689* Patches by Yuli Barcohen, 12 Jun 2003:
4690 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
4691 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
4692 configuration word supplied by FPGA on some MPC8260ADS boards
4693
4694* Patch by Pantelis Antoniou, 10 Jun 2003:
4695 Unify status LED interface
4696
wdenk15ef8a52003-06-18 20:22:24 +00004697* Add support for DS12887 RTC; add RTC support for ATC board
4698
wdenk2abbe072003-06-16 23:50:08 +00004699* Patch by Nicolas Lacressonniere, 11 Jun 2003:
4700 Modifications for Atmel AT91RM9200DK ARM920T based development kit
4701 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +00004702 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +00004703 - Add Flash detection on Atmel AT91RM9200DK
4704 (between Atmel AT49BV1614 and AT49BV1614A flashes)
4705 - Replace old Ethernet PHY layer functions
4706 - Change link address
4707
4708* Patch by Frank Smith, 9 Jun 2003:
4709 use CRIT_EXCEPTION for machine check on 4xx
4710
4711* Patch by Detlev Zundel, 13 Jun 2003:
4712 added implementation of the "carinfo" command in cmd_immap.c
4713
wdenk71f95112003-06-15 22:40:42 +00004714* Fix CONFIG_NET_MULTI support in include/net.h
4715
4716* Patches by Kyle Harris, 13 Mar 2003:
4717 - Add FAT partition support
4718 - Add command support for FAT
4719 - Add command support for MMC
4720 ----
4721 - Add Intel PXA support for video
4722 - Add Intel PXA support for MMC
4723 ----
4724 - Enable MMC and FAT for lubbock board
4725 - Other misc changes for lubbock board
4726
wdenk487778b2003-06-06 11:20:01 +00004727* Patch by Robert Schwebel, April 02, 2003:
4728 fix for SMSC91111 driver
4729
wdenka3ed3992003-06-05 19:37:36 +00004730* Patch by Vladimir Gurevich, 04 Jun 2003:
4731 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
4732
stroese08eaea92003-06-05 15:44:37 +00004733* Patch by Stefan Roese, 05 Jun 2003:
4734 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
4735 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
4736 data cache can be used even if the chip select is in use.
4737 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
4738 (see README for further description).
4739 - Changed config files of CONFIG_EEPRO100 boards to use the
4740 CFG_RX_ETH_BUFFER define.
4741
wdenk73a8b272003-06-05 19:27:42 +00004742* Add support for RMU board
4743
4744* Add support for TQM862L at 100/50 MHz
4745
4746* Patch by Pantelis Antoniou, 02 Jun 2003:
4747 major reconstruction of networking code;
4748 add "ping" support (outgoing only!)
4749
wdenkf3e0de62003-06-04 15:05:30 +00004750* Patch by Denis Peter, 04 June 2003:
4751 add support for the MIP405T board
4752
wdenk682011f2003-06-03 23:54:09 +00004753* Patches by Udi Finkelstein, 2 June 2003:
4754 - Added support for custom keyboards, initialized by defining a
4755 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
4756 - Added support for the RBC823 board.
4757 - cpu/mpc8xx/lcd.c now automatically calculates the
4758 Horizontal Pixel Count field.
4759
4760* Fix alignment problem in BOOTP (dhcp_leasetime option)
4761 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
4762
4763* Patch by Mark Rakes, 14 May 2003:
4764 add support for Intel e1000 gig cards.
4765
4766* Patch by Nye Liu, 3 Jun 2003:
4767 fix critical typo in MAMR definition (include/mpc8xx.h)
4768
4769* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
4770
4771* Patch by Klaus Heydeck, 2 Jun 2003
4772 Minor changes for KUP4K configuration
4773
wdenk7a8e9bed2003-05-31 18:35:21 +00004774* Patch by Marc Singer, 29 May 2003:
4775 Fixed rarp boot method for IA32 and other little-endian CPUs.
4776
4777* Patch by Marc Singer, 28 May 2003:
4778 Added port I/O commands.
4779
4780* Patch by Matthew McClintock, 28 May 2003
4781 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
4782 - minor patches for utx8245
4783
4784* Patch by Daniel Engström, 28 May 2003:
4785 x86 update
4786
4787* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
4788 add nand flash support to SXNI855T configuration
4789 fix/extend nand flash support:
4790 - fix 'nand erase' command so does not erase bad blocks
4791 - fix 'nand write' command so does not write to bad blocks
4792 - fix nand_probe() so handles no flash detected properly
4793 - add doc/README.nand
4794 - add .jffs2 and .oob options to nand read/write
4795 - add 'nand bad' command to list bad blocks
4796 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
4797 - make NAND read/write faster
4798
4799* Patch by Rune Torgersen, 23 May 2003:
4800 Update for MPC8266ADS board
4801
wdenk3b57fe02003-05-30 12:48:29 +00004802* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02004803 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
wdenk3b57fe02003-05-30 12:48:29 +00004804 _time_ (!) if the environment is embedded within the U-Boot image,
4805 or in a separate flash sector.
4806
4807* Cleanup CFG_DER #defines in config files (wd maintained only)
4808
wdenkf07771c2003-05-28 08:06:31 +00004809* Fix data abort exception handling for arm920t CPU
4810
4811* Fix alignment problems with flash driver for TRAB board
4812
4813* Patch by Donald White, 21 May 2003:
4814 fix calculation of base address in pci_hose_config_device()
4815
4816* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
4817 execute "cmd2", even if "cmd1" fails. Note that this is different
4818 to "run var1 var2" where the contents of "var2" will NOT be
4819 executed when a command in "var1" fails.
4820
wdenk38b99262003-05-23 23:18:21 +00004821* Add zero-copy ramdisk support (requires corresponding kernel support!)
4822
wdenk4c3b21a2003-05-23 12:36:20 +00004823* Patch by Kyle Harris, 20 May 2003:
4824 In preparation for an ixp port, rename cpu/xscale and arch-xscale
4825 into cpu/pxa and arch-pxa.
4826
stroesed9ff6e82003-05-23 11:49:24 +00004827* Patch by Stefan Roese, 23 May 2003:
4828 - IBM PPC405EP port added.
4829 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
4830 UART0) is used as default U-Boot console. PPC4xx only!
4831 - esd ASH405 board added (PPC405EP based).
4832 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
4833 - esd CPCI405AB board added.
4834 - esd PMC405 board added.
4835 - Update of some esd boards.
4836
wdenk33149b82003-05-23 11:38:58 +00004837* Patch by Denis Peter, 19 Mai 2003:
4838 add support for the MIP405-3 board
4839
wdenk5d232d02003-05-22 22:52:13 +00004840* Patch by Dave Ellis, 22 May 2003:
4841 Fix problem with only partially cleared .bss segment
4842
4843* Patch by Rune Torgersen, 12 May 2003:
4844 get PCI to work on a MPC8266ADS board; incorporate change to
4845 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
4846
4847* Patch by Nye Liu, 1 May 2003:
4848 minor patches for the FADS8xx
4849
4850* Patch by Thomas Schäfer, 28 Apr 2003:
4851 Fix SPD handling for 256 ECC DIMM on Walnut
4852
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02004853* Add support for arbitrary bitmaps for TRAB's VFD command;
wdenkc8c3a8b2003-05-21 20:26:20 +00004854 allow to pass boot bitmap addresses in environment variables;
4855 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +00004856
4857* Patch by Christian Geißinger, 19 May 2002:
4858 On TRAB: wait until the dummy byte has been completely sent
4859
wdenk7f70e852003-05-20 14:25:27 +00004860* Patch by David Updegraff, 22 Apr 2003:
4861 update for CrayL1 board
4862
4863* Patch by Pantelis Antoniou, 21 Apr 2003:
4864 add boot support for ARTOS (a proprietary OS)
4865
4866* Patch by Steven Scholz, 11 Apr 2003:
4867 Add support for RTC DS1338
4868
4869* Patch by Rod Boyce, 24 Jan 2003:
4870 Fix counting of extended partitions in diskboot command
4871
wdenk59de2ed2003-05-20 10:58:04 +00004872* Patch by Christophe Lindheimer, 20 May 2003:
4873 allow the use of CFG_LOADS when CFG_NO_FLASH is set
4874
wdenk86d82762003-05-20 10:39:44 +00004875* Fix SDRAM timing on Purple board
4876
wdenk66fd3d12003-05-18 11:30:09 +00004877* Add support for CompactFlash on ATC board
4878 (includes support for Intel 82365 and compatible PC Card controllers,
4879 and Yenta-compatible PCI-to-CardBus controllers)
4880
wdenk45219c42003-05-12 21:50:16 +00004881* Patch by Mathijs Haarman, 08 May 2003:
4882 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
4883
wdenk9c62cc52003-05-03 23:33:47 +00004884* Fix problem with usage of "true" (undefined in current versions of bfd.h)
4885
wdenk7aa78612003-05-03 15:50:43 +00004886* Add support for Promess ATC board
4887
4888* Patch by Keith Outwater, 28 Apr 2003:
4889 - Miscellaneous corrections and additions to GEN860T board specific code.
4890 - Added GEN860_SC variant to GEN860T.
4891 - Miscellaneous corrections to GEN860T documentation.
4892 - Correct duplicate entry in U-Boot CREDITS file.
4893 - Add GEN860T_SC entry in MAINTAINERS file.
4894 - Update CREDITS file with GEN860T_SC info.
4895
4896* Update Smiths Aerospace addresses in MAINTAINERS file
4897
4898* Fix error handling in hush's version of "run" command
4899
wdenk4532cb62003-04-27 22:52:51 +00004900* LWMON extensions:
4901 - Splashscreen support
4902 - modem support
4903 - sysmon support
4904 - temperature dependend enabling of LCD
4905
4906* Allow booting from old "PPCBoot" disk partitions
4907
4908* Add support for TQM8255 Board / MPC8255 CPU
4909
4910======================================================================
wdenk02c9bed2003-04-20 17:41:25 +00004911Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +00004912======================================================================
4913
wdenkd791b1d2003-04-20 14:04:18 +00004914* Make sure Block Lock Bits get cleared in R360MPI flash driver
4915
4916* MPC823 LCD driver: Fill color map backwards, to allow for steady
4917 display when Linux takes over
4918
4919* Patch by Erwin Rol, 27 Feb 2003:
4920 Add support for RTEMS (this time for real).
4921
4922* Add support for "bmp info" and "bmp display" commands to load
4923 bitmap images; this can be used (for example in a "preboot"
4924 command) to display a splash screen very quickly after poweron.
4925
4926* Add support for 133 MHz clock on INCA-IP board
4927
wdenk4a6fd342003-04-12 23:38:12 +00004928* Patch by Lutz Dennig, 10 Apr 2003:
4929 Update for R360MPI board
4930
4931* Add new meaning to "autostart" environment variable:
4932 If set to "no", a standalone image passed to the
4933 "bootm" command will be copied to the load address
4934 (and eventually uncompressed), but NOT be started.
4935 This can be used to load and uncompress arbitrary
4936 data.
4937
stroese69f8f8272003-04-10 13:30:28 +00004938* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +00004939 Changed DHCP client to use IP address from server option field #54
4940 from the OFFER packet in the server option field #54 in the REQUEST
4941 packet. This fixes a problem using a Windows 2000 DHCP server,
4942 where the DHCP-server is not the TFTP-server.
4943
4944* Set max brightness for MN11236 displays on TRAB board
stroese69f8f8272003-04-10 13:30:28 +00004945
wdenkd126bfb2003-04-10 11:18:18 +00004946* Add support for TQM862L modules
4947
4948======================================================================
wdenk60fbe252003-04-08 23:25:21 +00004949Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +00004950======================================================================
4951
wdenk3e386912003-04-05 00:53:31 +00004952* Patch by Arun Dharankar, 4 Apr 2003:
4953 Add IDMA example code (tested on 8260 only)
4954
4955* Add support for Purple Board (MIPS64 5Kc)
4956
4957* Add support for MIPS64 5Kc CPUs
4958
4959* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
4960
4961* Patch by Denis Peter, 04 Apr 2003:
4962 - update MIP405-4 board
4963
stroese36c05a82003-04-04 16:55:30 +00004964* Patch by Stefan Roese, 4 Apr 2003:
4965 - U-Boot version environment variable "ver" added
4966 (CONFIG_VERSION_VARIABLE).
4967 - Changed PPC405GPr version from A to B.
4968 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
4969
wdenk3e386912003-04-05 00:53:31 +00004970* Patches by Denis Peter, 03 April 2003:
4971 - fix PCI IRQs on MPL boards
4972 - fix two more un-relocated pointer problems
4973
4974* Fix behaviour of "run" command:
4975 - print error message iv variable does not exist
4976 - terminate processing of arguments in case of error
4977
4978* Patches by Peter Figuli, 10 Mar 2003
4979 - Add support for BTUART on PXA platform
4980 - Add support for WEP EP250 (PXA) board
4981
4982* Fix flash problems on INCA-IP; add tool to allow bruning images to
4983 flash using a BDI2000
4984
4985* Implement fix for I2C Edge Conditions problem for all boards that
4986 use the bit-banging driver (common/soft_i2c.c)
4987
wdenk0db5bca2003-03-31 17:27:09 +00004988* Patch by Martin Winistoerfer, 23 Mar 2003
4989 - Add port to MPC555/556 microcontrollers
4990 - Add support for cmi customer board with
4991 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
4992
4993* Patch by Rick Bronson, 28 Mar 2003:
4994 - fix common/cmd_nand.c
4995
wdenk85ec0bc2003-03-31 16:34:49 +00004996* Patch by Arun Dharankar, 24 Mar 2003:
4997 - add threads / scheduler example code
4998
4999* Add patches by Robert Schwebel, 31 Mar 2003:
5000 - add ctrl-c support for kermit download
5001 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +00005002 - csb226 board: bring in sync with innokom/memsetup.S
5003 - csb226 board: fix MDREFR handling
5004 - misc doc fixes / extensions
5005 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
5006 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +00005007
stroese36c05a82003-04-04 16:55:30 +00005008* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +00005009
wdenk506f0442003-03-28 14:40:36 +00005010* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
5011 - fix SRAM and SDRAM memory sizing
5012 - add status LED support
5013 - add MAC address for second (SCC1) ethernet port
5014
5015* Update default environment for TQM8260 board
5016
wdenkdc7c9a12003-03-26 06:55:25 +00005017* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +00005018 - Add NAND flash support for reading, writing, and erasing NAND
5019 flash (certain forms of which are called SmartMedia).
5020 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +00005021
5022* Patches by Robert Schwebel, 19 Mar 2003:
5023 - use arm-linux-gcc as default compiler for ARM
5024 - fix i2c fixup code
5025 - fix missing baudrate setting
5026 - added $loadaddr / CFG_LOAD_ADDR support to loadb
5027 - moved "ignoring trailing characters" _before_ u-boot wants to
5028 print out diagnostics messages; removes bogus characters at the
5029 end of transmission
5030
5031* Patch by John Zhan, 18 Mar 2003:
5032 Add support for SinoVee Microsystems SC8xx boards
5033
5034* Patch by Rolf Offermanns, 21 Mar 2003:
5035 ported the dnp1110 related changes from the current armboot cvs to
5036 current u-boot cvs. smc91111 does not work. problem marked in
5037 smc91111.c, grep for "FIXME".
5038
5039* Patch by Brian Auld, 25 Mar 2003:
5040 Add support for STM flash chips on ebony board
5041
wdenk4d75a502003-03-25 16:50:56 +00005042* Add PCI support for MPC8250 Boards (PM825 module)
5043
stroese44e5c5c2003-03-25 14:44:48 +00005044* Patch by Stefan Roese, 25 Mar 2003:
5045 - PCI405 update.
5046
stroese5d5d44e2003-03-20 15:32:59 +00005047* Patch by Stefan Roese, 20 Mar 2003:
5048 - CPCI4052 update (support for revision 3).
5049 - Set edge conditioning circuitry on PPC405GPr for compatibility
5050 to existing PPC405GP designs.
5051 - Clip udiv to 5 bits on PPC405 (serial.c).
5052
wdenkc0218802003-03-27 12:09:35 +00005053* Extend INCAIP board support:
5054 - add automatic RAM size detection
5055 - add "bdinfo" command
5056 - pass flash address and size to Linux kernel
5057 - switch to 150 MHz clock
5058
wdenk06d01db2003-03-14 20:47:52 +00005059* Avoid flicker on the TRAB's VFD by synchronizing the enable with
5060 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
5061 boards, version 153 for Rev. 200 boards).
5062
5063* Patch by Vladimir Gurevich, 12 Mar 2003:
5064 Fix relocation problem of statically initialized string pointers
5065 in common/cmd_pci.c
5066
5067* Patch by Kai-Uwe Blöm, 12 Mar 2003:
5068 Cleanup & bug fixes for JFFS2 code:
5069 - the memory mangement was broken. It caused havoc on malloc by
5070 writing beyond the block boundaries.
5071 - the length calculation for files was wrong, sometimes resulting
5072 in short file reads.
5073 - data copying now optionally takes fragment version numbers into
5074 account, to avoid copying from older data.
5075 See doc/README.JFFS2 for details.
5076
wdenk3bac3512003-03-12 10:41:04 +00005077* Patch by Josef Wagner, 12 Mar 2003:
5078 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
5079 - ETH05 and BEDBUG support for CU824
5080 - added support for MicroSys CPC45
5081 - new BOOTROM/FLASH0 and DOC base for PM826
5082
5083* Patch by Robert Schwebel, 12 Mar 2003:
5084 Fix the chpart command on innokom board
5085
5086* Name cleanup:
5087 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
5088 s/PPCBoot/U-Boot/ in some files
5089 s/pImage/uImage/ in some files
5090
5091* Patch by Detlev Zundel, 15 Jan 2003:
5092 Fix '' command line quoting
5093
5094* Patch by The LEOX team, 19 Jan 2003:
5095 - add support for the ELPT860 board
5096 - add support for Dallas ds164x RTC
5097
wdenk1cb8e982003-03-06 21:55:29 +00005098* Patches by David Müller, 31 Jan 2003:
5099 - minimal setup for CardBus bridges
5100 - add EEPROM read/write support in the CS8900 driver
5101 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +00005102 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +00005103
5104* Patch by Steven Scholz, 04 Feb 2003:
5105 add support for RTC DS1307
5106
5107* Patch by Reinhard Meyer, 5 Feb 2003:
5108 fix PLPRCR/SCCR init sequence on 8xx to allow for
5109 changes of EBDF by software
5110
5111* Patch by Vladimir Gurevich, 07 Feb 2003:
5112 "API-compatibility patch" for 4xx I2C driver
5113
5114* TRAB fixes / extensions:
5115 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +00005116 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +00005117 - make sure both buzzers are turned off (drive low level)
5118
wdenk47cd00f2003-03-06 13:39:27 +00005119* Patches by Robert Schwebel, 06 Mar 2003:
5120 - fix bug in BOOTP code (must use NetCopyIP)
5121 - update of CSB226 port
5122 - clear BSS segment on XScale
5123 - added support for i2c_init_board() function
5124 - update to the Innokom plattform
5125
5126* Extend support for redundand environments for configurations where
5127 environment size < sector size
5128
wdenkdb2f721f2003-03-06 00:58:30 +00005129* Patch by Rune Torgersen, 13 Feb 2003:
5130 Add support for Motorola MPC8266ADS board
5131
5132* Patch by Kyle Harris, 19 Feb 2003:
5133 patches for the Intel lubbock board:
5134 memsetup.S - general cleanup (based on Robert's csb226 code)
5135 flash.c - overhaul, actually works now
5136 lubbock.c - fix init funcs to return proper value
5137
5138* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +00005139 - Fixed off by one in RFTA calculation.
wdenkdb2f721f2003-03-06 00:58:30 +00005140 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +00005141 minimum timing so clamp it to what we can do.
wdenkdb2f721f2003-03-06 00:58:30 +00005142 - Takes function pointer to function for reading the spd_nvram. Usefull
5143 for faking data or hardcode a module without the nvram.
5144 - fix other user for above change
5145 - fix some comments.
5146
5147* Patches by Brian Waite, 26 Feb 2003:
5148 - fix port for evb64260 board
5149 - fix PCI for evb64260 board
5150 - fix PCI scan
5151
5152* Patch by Reinhard Meyer, 1 Mar 2003:
5153 Add support for EMK TOP860 Module
5154
5155* Patch by Yuli Barcohen, 02 Mar 2003:
5156 Add SPD EEPROM support for MPC8260ADS board
5157
wdenk43d96162003-03-06 00:02:04 +00005158* Patch by Robert Schwebel, 21 Jan 2003:
5159 - Add support for Innokom board
5160 - Don't complain if "install" fails
5161 - README cleanup (remove duplicated lines)
5162 - Update PXA header files
5163
5164* Add documentation for existing POST code (doc/README.POST)
5165
5166* Patch by Laudney Ren, 15 Jan 2003:
5167 Fix handling of redundand environment in "tools/envcrc.c"
5168
5169* Patch by Detlev Zundel, 28 Feb 2003:
5170 Add bedbug support for 824x systems
5171
5172* Add support for 16 MB flash configuration of TRAB board
5173
5174* Patch by Erwin Rol, 27 Feb 2003:
5175 Add support for RTEMS
5176
5177* Add image information to README
5178
stroese2a9e02e2003-02-18 11:30:24 +00005179* Patch by Stefan Roese, 18 Feb 2003:
5180 CPCIISER4 configuration updated.
5181
stroesed7787c62003-02-17 16:06:06 +00005182* Patch by Stefan Roese, 17 Feb 2003:
5183 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
5184
stroesead10dd92003-02-14 11:21:23 +00005185* Patch by Stefan Roese, 13 Feb 2003:
5186 Add "pcidelay" environment variable (in ms, enabled via
5187 CONFIG_PCI_BOOTDELAY).
5188 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
5189 RST# to respond to configuration cycles (33MHz -> 1s).
5190
wdenk43d96162003-03-06 00:02:04 +00005191* Fix dual PCMCIA slot support (when running with just one
5192 slot populated)
5193
5194* Add VFD type detection to trab board
5195
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02005196* extend drivers/cs8900.c driver to synchronize ethaddr environment
wdenk43d96162003-03-06 00:02:04 +00005197 variable with value in the EEPROM
5198
stroeseee1b3b52003-02-10 16:39:00 +00005199* Patch by Stefan Roese, 10 Feb 2003:
5200 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
5201
wdenkc0218802003-03-27 12:09:35 +00005202* Add support for MIPS32 4Kc CPUs
5203
5204* Add support for INCA-IP Board
5205
wdenk43d96162003-03-06 00:02:04 +00005206======================================================================
5207Changes for U-Boot 0.2.2:
5208======================================================================
5209
wdenkaacf9a42003-01-17 16:27:01 +00005210* Add dual ethernet support on PM826
5211
5212* Add support for LXT971 PHY on PM826
5213
5214* Patch by Tord Andersson, 16 Jan 2003:
5215 Fix flash sector count for TQM8xxL
5216
5217* Fix I2C EEPROM problem on ICU862 board (would only write the first
5218 16 bytes out of each 32 byte block)
5219
5220======================================================================
5221Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +00005222======================================================================
5223
wdenk608c9142003-01-13 23:54:46 +00005224* Add support for V37 board
5225 (patch by Jón Benediktsson, 11 Dec 2002)
5226
wdenkd0fb80c2003-01-11 09:48:40 +00005227* Update baudrate in bd_info when it gets changed
5228
5229* Add watchdog trigger points while waiting for serial port
5230 (so far only 8xx -- needed on LWMON with 100ms watchdog)
5231
5232* Improve command line tool to access the U-Boot's environment
5233 (figuration of the utility, using a config file)
5234
wdenka25f8622003-01-02 23:57:29 +00005235* Add single quote support for (old) command line parser
5236
wdenk288b3d72002-12-20 23:42:25 +00005237* Switch LWMON board default config from FRAM to EEPROM;
5238 in POST, EEPROM shows up on 8 addresses
5239
5240======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +00005241Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00005242======================================================================
5243
wdenk6aff3112002-12-17 01:51:00 +00005244* Use 1-byte-read instead of -write for iprobe() function
5245 Add i2c commands to PM826 config
5246
5247* extend I2C POST code: check for list on known addresses
5248
wdenk228f29a2002-12-08 09:53:23 +00005249* Improve log buffer code; use "loglevel" to decide which messages
5250 to log on the console, too (like in Linux); get rid of "logstart"
5251
5252* Add command line tool to access the U-Boot's environment
5253 (board-specific for TRAB now, to be fixed later)
5254
wdenk7c7a23b2002-12-07 00:20:59 +00005255* Patch by Hans-Joerg Frieden, 06 Dec 2002
5256 Fix misc problems with AmigaOne support
5257
5258* Patch by Chris Hallinan, 3 Dec 2002:
5259 minor cleanup to the MPC8245 EPIC driver
5260
5261* Patch by Pierre Aubert , 28 Nov 2002
5262 Add support for external (SIU) interrupts on MPC8xx
5263
5264* Patch by Pierre Aubert , 28 Nov 2002
5265 Fix nested syscalls bug in standalone applications
5266
5267* Patch by David Müller, 27 Nov 2002:
5268 fix output of "pciinfo" command for CardBus bridge devices.
5269
5270* Fix bug in TQM8260 board detection - boards got stuck when board ID
5271 was not readable
5272
wdenk1f53a412002-12-04 23:39:58 +00005273* Add LED indication for IDE activity on KUP4K board
5274
wdenka6c7ad22002-12-03 21:28:10 +00005275* Fix startup problems with VFD display on TRAB
5276
5277* Patch by Pierre Aubert, 20 Nov 2002
5278 Add driver for Epson SED13806 graphic controller.
5279 Add support for BMP logos in cfb_console driver.
5280
wdenkea909b72002-11-21 23:11:29 +00005281* Added support for both PCMCIA slots (at the same time!) on MPC8xx
5282
5283* Patch by Rod Boyce, 21 Nov 2002:
5284 fix PCMCIA on MBX8xx board
5285
5286* Patch by Pierre Aubert , 21 Nov 2002
5287 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
5288 bootmode word in DPRAM configurable
5289
wdenkb2184c32002-11-19 23:01:07 +00005290* Patch by Daniel Engström, 18 Nov 2002:
5291 Fixes for x86 port (mostly strings issues)
5292
5293* Patch by Ken Chou, 18 Nov 2002:
5294 Fix for natsemi NIC cards (DP83815)
5295
5296* Patch by Pierre Aubert, 19 Nov 2002:
5297 fix a bug for the MII configuration, and some warnings
5298
wdenkc7de8292002-11-19 11:04:11 +00005299* Patch by Thomas Frieden, 13 Nov 2002:
5300 Add code for AmigaOne board
5301 (preliminary merge to U-Boot, still WIP)
5302
5303* Patch by Jon Diekema, 12 Nov 2002:
5304 - Adding URL for IEEE OUI lookup
5305 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
5306 being defined.
5307 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
5308 root-on-nfs macros are designed to switch how the default boot
5309 method gets defined.
5310
wdenk2262cfe2002-11-18 00:14:45 +00005311* Patch by Daniel Engström, 13 Nov 2002:
5312 Add support for i386 architecture and AMD SC520 board
5313
5314* Patch by Pierre Aubert, 12 Nov 2002:
5315 Add support for DOS filesystem and booting from DOS floppy disk
5316
wdenk1d0350e2002-11-11 21:14:20 +00005317* Patch by Jim Sandoz, 07 Nov 2002:
5318 Increase number of network RX buffers (PKTBUFSRX in
5319 "include/net.h") for EEPRO100 based boards (especially SP8240)
5320 which showed "Receiver is not ready" errors when U-Boot was
5321 processing the receive buffers slower than the network controller
5322 was filling them.
5323
wdenkeb9401e2002-11-11 02:11:37 +00005324* Patch by Andreas Oberritter, 09 Nov 2002:
5325 Change behaviour of NetLoop(): return -1 for errors, filesize
5326 otherwise; return code 0 is valid an means no file loaded - in this
5327 case the environment still gets updated!
5328
5329* Patches by Jon Diekema, 9 Nov 2002:
5330 - improve ADC/DAC clocking on the SACSng board to align
5331 the failing edges of LRCLK and SCLK
5332 - sbc8260 configuration tweaks
5333 - add status LED support for 82xx systems
5334 - wire sspi/sspo commands into command handler; improved error
5335 handlering
5336 - add timestamp support and alternate memory test to the
5337 SACSng configuration
5338
5339* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +00005340 Add "-n" to linker options to get rid of "Not enough room for
5341 program headers" problem
5342
5343* Patch by David Müller, 05 Nov 2002
5344 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
5345 so we can use an already existing name
5346
5347* Patch by Pierre Aubert, 05 Nov 2002
5348 Hardware relatied improvments in FDC boot code
5349
5350* Patch by Holger Schurig, 5 Nov 2002:
5351 Make the PXA really change it's frequency
5352
5353* Patch by Pierre Aubert, 05 Nov 2002
5354 Add support for slave serial Spartan 2 FPGAs
5355
Wolfgang Denkcf48eb92006-04-16 10:51:58 +02005356* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
wdenk7f6c2cb2002-11-10 22:06:23 +00005357 drivers
5358
wdenk56f94be2002-11-05 16:35:14 +00005359* Add support for log buffer which can be passed to Linux kernel's
5360 syslog mechanism; used especially for POST results.
5361
5362* Patch by Klaus Heydeck, 31 Oct 2002:
5363 Add initial support for kup4k board
5364
wdenk384ae022002-11-05 00:17:55 +00005365* Patch by Robert Schwebel, 04 Nov 2002:
5366 - use watchdog to reset PXA250 systems
5367 - added progress callbacks to (some of the) ARM code
5368 - update for Cogent CSB226 board
5369
5370* Add support for FPS860 board
5371
wdenke95b61c2002-11-04 16:02:40 +00005372* Patch by Guillaume Alexandre,, 04 Nov 2002:
5373 Improve PCI access on 32-bits Compact PCI bus
5374
wdenk24ee89b2002-11-03 17:56:27 +00005375* Fix mdelay() on TRAB - this was still the debugging version with
5376 seconds instead of ms.
5377
5378* Patch by Robert Schwebel, 1 Nov 2002:
5379 XScale related cleanup (affects all ARM boards)
5380
5381* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00005382
5383======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00005384Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00005385======================================================================
5386
5387This is the initial version of "Das U-Boot", the Universal Boot Loader.
5388
5389It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
5390For information about the history of the project please see the
5391PPCBoot project page at http://sourceforge.net/projects/ppcboot
5392
5393======================================================================