blob: a11dd4d7409955aaad2f734226f213007e7730c6 [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
Wolfgang Denk27e166b2005-12-19 13:02:45 +01002Changes since U-Boot 1.1.4:
3======================================================================
4
Wolfgang Denkdc013d42006-03-12 01:59:35 +01005* Add loads of ntohl() in image header handling
6 Patch by Steven Scholz, 10 Jun 2005
7
Wolfgang Denk8ff02082006-03-12 01:55:43 +01008* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
9 variable to set clock
10 Patch by Yuli Barcohen, 05 Jun 2005
11
Wolfgang Denkf47b6612006-03-12 01:48:55 +010012* RPXlite configuration fixes
13 - Use correct flash sector size
14 - Use correct memory test end address
15 - Add support for bzip2 compression
16 - Various small fixes
17 Patch by Yuli Barcohen, 05 Jun 2005
18
Wolfgang Denkaba9f1a2006-03-12 01:45:44 +010019* Memory configuration changes for ZPC.1900 board
20 - Fix SDRAM timing on both local bus and 60x bus
21 - Add support for second flash bank (SIMM)
22 - Change boot flash base
23 Patch by Yuli Barcohen, 05 Jun 2005
24
Wolfgang Denk5797b822006-03-12 01:43:03 +010025* Add support for Adder boards with 16MB SDRAM;
26 add support for second FEC on Adder87x board.
27 Patch by Yuli Barcohen, 05 Jun 2005
28
Wolfgang Denk7c54c702006-03-12 01:40:01 +010029* Fix conditional for including ks8695eth driver
30 Patch by Greg Ungerer, 04 Jun 2005
31
Wolfgang Denk92b197f2006-03-12 01:37:50 +010032* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
33 Patch by Friedrich Lobenstock, 02 Jun 2005
34
Wolfgang Denk82d716f2006-03-12 01:30:45 +010035* Fix comment in common/soft_i2c.c
36 Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
37
Wolfgang Denk611125a2006-03-12 01:23:43 +010038* Cleanup compiler warnings.
39 Patch by Greg Ungerer, 21 May 2005
40
Wolfgang Denk22814902006-03-12 01:21:19 +010041* Word alignment fixes for word aligned NS16550 UART
42 Patch by Jean-Paul Saman, 01 Mar 2005
43
44 Fixes bug with UART that only supports word aligned access: removed
45 "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
46 (broken!) versions of GCC generate byte accesses when encountering
47 the packed attribute regardless if the struct is already correctly
48 aligned for a platform. Peripherals that can only handle word
49 aligned access won't work properly when accessed with byte access.
50 The struct NS16550 is already word aligned for REG_SIZE = 4, so
51 there is no need to packed the struct in that case.
52
Wolfgang Denkd509b812006-03-12 01:13:30 +010053* Fix behaviour if gatewayip is not set
54 Patch by Robin Gilks, 23 Dec 2004
55
Wolfgang Denk84ef51a2006-03-12 00:04:20 +010056* Fix cleanup for netstart board.
57 Remove build results from repository
58
Wolfgang Denkd52fb7e2006-03-11 22:53:33 +010059* Some code cleanup for GCC 4.x
60
Wolfgang Denk4367a012006-03-11 19:15:27 +010061* Fixes to support environment in NAND flash;
62 enable NAND flash based environment for delta board.
63
Wolfgang Denk9c575e52006-03-07 00:33:28 +010064* Add support for Intel Monahans CPU on Zylonite and Delta boards
65 (This is Work in Progress!)
66
Wolfgang Denk1f62bc22006-03-07 00:32:07 +010067* Add support for TQM8260-AI boards.
68
Wolfgang Denkbfc81252006-03-06 13:03:37 +010069* Minor code cleanup
70
Wolfgang Denk4e3ccd22006-03-06 11:25:22 +010071* Merge the new NAND code (testing-NAND brach); see doc/README.nand
Bartlomiej Sieka038ccac2006-02-24 09:37:22 +010072 Rewrite of NAND code based on what is in 2.6.12 Linux kernel
73 Patch by Ladislav Michl, 29 Jun 2005
74
Stefan Roesef1ee9822006-03-04 14:57:03 +010075* Add lowboot target to mcc200 board
76 Patch by Stefan Roese, 4 Mar 2006
77
Stefan Roesef18e8742006-03-01 17:00:49 +010078* Fix problem with flash_get_size() from CFI driver update
79 Patch by Stefan Roese, 1 Mar 2006
80
Wolfgang Denk4f718662006-03-02 11:03:05 +010081* Make CFG_NO_FLASH work on ARM systems
82 Patch by Markus Klotzbuecher, 27 Feb 2006
83
Wolfgang Denk82f2e332006-02-28 18:39:20 +010084* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
85 use hush shell.
86
Stefan Roese58ad4972006-02-28 15:33:28 +010087* Convert mcc200 to use common CFI flash driver
88 Patch by Stefan Roese, 28 Feb 2006
89
Stefan Roese79b4cda2006-02-28 15:29:58 +010090* Add env-variable "unlock" to handle initial state of sectors
91 (locked/unlocked).
92
93 Only the U-Boot image and it's environment is protected,
94 all other sectors are unprotected (unlocked) if flash
95 hardware protection is used (CFG_FLASH_PROTECTION) and
96 the environment variable "unlock" is set to "yes".
97
98 Patch by Stefan Roese, 28 Feb 2006
99
100* Update drivers/cfi_flash.c:
101 - find_sector() called in both versions of flash_write_cfiword()
102 Patch by Peter Pearse, 27th Feb 2006
103
104* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
105 Patch by Jose Maria Lopez, 16 Jan 2006
106
107* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
108 Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
109
110* Changes/fixes for drivers/cfi_flash.c:
111 We *should* check if there are any error bits if the previous call
112 returned ERR_OK (Otherwise we will have output an error message in
113 flash_status_check() already.) The original code would only check for
114 error bits if flash_status_check() returns ERR_TIMEOUT.
115 Patch by Marcus Hall, 23 Aug 2005
116
117* Changes/fixes for drivers/cfi_flash.c:
118 - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
119 - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
120 Patch by Sangmoon Kim, 19 Aug 2005
121
122* Fixes for drivers/cfi_flash.c:
123 - Fix wrong timeout value usage in flash_status_check()
124 - Round write_tout up when converting to msec in flash_get_size()
125 - Remove clearing flash status at the end of flash_write_cfibuffer()
126 which sets Intel 28F640J3 flash back to command mode on CSB472
127 Patch by Tolunay Orkun, 02 July 2005
128
Heiko Schocher075866d2006-02-20 17:34:12 +0100129* Add basic support for the SMMACO4 Board from PanDaCom.
130 Patch by Heiko Schocher, 20 Feb 2006
131
Wolfgang Denk881a87e2006-02-21 17:33:04 +0100132* Add GIT version information (commid ID) to untagged U-Boot versions
133
134 As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
135 of all unreleased (untagged) U-Boot images will be automatically
136 extended upon compiletime with a part of the GIT commit ID and
137 possibly with "dirty" if uncommited changes are detected.
138
139 Here an example for the resulting version:
140 "U-Boot 1.1.4-g3457ac18-dirty"
141
142 The version is now maintained in the toplevel Makefile and the
143 version headers are autogenerated.
144
145 Patch by Stefan Roese, 9 Feb 2006
146
Wolfgang Denk84e106c2006-02-07 15:18:25 +0100147* Update default environment for INKA4x00 board.
148
Stefan Roese79830d52006-02-08 15:54:15 +0100149* Convert CPCI750 to use common CFI flash driver
150 Patch by Reinhard Arlt, 8 Feb 2006
151
Stefan Roese48a05a52006-02-07 16:51:04 +0100152* Various changes to esd HH405 board specific files
153 Patch by Matthias Fuchs, 07 Feb 2006
154
Wolfgang Denk57cac1f2006-01-29 19:12:41 +0100155* Cleanup U-Boot boot messages on ARM.
156
157 To match the U-Boot user interface on ARM platforms to the U-Boot
158 standard (as on PPC platforms), some messages with debug character
159 are removed from the default U-Boot build.
160 Enable DEBUG for lib_arm/board.c to enable debug messages.
161 New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
162 Patch by Stefan Roese, 24 Jan 2006
163
Stefan Roese18c5e642006-01-18 20:06:44 +0100164* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
165 Patch by Stefan Roese, 18 Jan 2006
166
Stefan Roesea7b9fb92006-01-18 20:05:34 +0100167* Add VGA support (CT69000) to CPCI750 board.
168 Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
169 Patch by Reinhard Arlt, 30 Dec 2005
170
Stefan Roese2076d0a2006-01-18 20:03:15 +0100171* PMC405 and CPCI405: Moved configuration of pci resources
172 into config file.
173 PMC405 and CPCI2DP: Added firmware download and booting via pci.
174 Patch by Matthias Fuchs, 20 Dec 2005
175
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100176* Fix 28F256J3A support on PM520 board
177 (without bank-switching only 32 MB can be accessed)
178
Wolfgang Denk756ceb82006-01-11 13:04:53 +0100179* Fix mkimage bug with multifile images created on 64 bit systems.
180
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100181* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
Wolfgang Denkc7428d42005-12-29 15:12:09 +0100182
Wolfgang Denk27e166b2005-12-19 13:02:45 +0100183* Fix compiler problem with at91rm9200dk board.
184 Patch by Eugen Bigz, 19 Dec 2005
185
186======================================================================
Stefan Roeseb79316f2005-08-15 12:31:23 +0200187Changes for U-Boot 1.1.4:
188======================================================================
189
Stefan Roese81a31702005-12-15 09:43:12 +0100190* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
191 - Changed GPIO setup to enable another address line in order to
192 address 64M of FLASH.
193 - Added function sdram_tr1_set to auto calculate the tr1 value for
194 the DDR.
195 Patch by Steven Blakeslee, 12 Dec 2005
196
Wolfgang Denka9e642e2005-12-16 15:14:18 +0100197* MPC5200: Set PCI retry counter to 0 = infinite retry;
198 The default of 255 is too short for slow devices.
199 Patch by Martin Nykodym, 12 Dec 2005
200
Marian Balakowicz3a7b1422005-12-06 20:33:07 +0100201* Change port configuration for O2DNT (CODEC1 on PSC1).
202
Wolfgang Denk74812662005-12-12 16:06:05 +0100203* Fix register for PCI async mode on PPC440EP
204 Patch by Youngchul Bang, 08 Dec 2005
205
206* Fix U-Boot linking problems (add .eh_frame segment to linker script)
207 This segment may be required by some libgcc.a functions
208 (like _udivdi3).
209
Wolfgang Denka889bd22005-12-06 15:02:31 +0100210* Fix DPRAM offset/size for MPC8541/8555.
211 Simplify TQM85xx Makefile handling.
212
Wolfgang Denk41253be2005-12-04 11:20:57 +0100213* Fix data overflow (typo?) in rtc/ds1302.c
214
Wolfgang Denkc75eba32005-12-01 02:15:07 +0100215* Fix U-Boot compilation for MIPS boards using ELDK 4.0
216
Stefan Roesed96f41e2005-11-30 13:06:40 +0100217* Add support for TQM8541/8555 boards, TQM85xx support reworked:
218 - Support for TQM8541/8555 boards added.
219 - Complete rework of TQM8540/8560 support.
220 - Common TQM85xx code now supports all current TQM85xx platforms
221 (TQM8540/8541/8555/8560).
222 - DDR SDRAM size detection added.
223 - CAS latency default values can be overwritten by setting "serial#"
224 to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
225 If problems are detected with this non default CAS latency,
Wolfgang Denk4a86d772005-12-01 01:38:13 +0100226 the default values will be used instead.
227 - Flash size detection added.
Stefan Roesed96f41e2005-11-30 13:06:40 +0100228 - Moved FCC ethernet driver initialization behind TSEC driver init
229 -> TSEC is first device.
230 Patch by Stefan Roese, 30 Nov 2005
231
Stefan Roese6e7fb6e2005-11-29 18:18:21 +0100232* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
233 Patch by John Otken, 23 Nov 2005
234
Stefan Roese3d9569b2005-11-27 19:36:26 +0100235* Changed PPC44x startup message (cpu info, speed...) to common style:
236 On PPC44x platforms, the startup message generated in "cpu.c" only
Wolfgang Denk4a86d772005-12-01 01:38:13 +0100237 comprised the ppc type and revision but not additional information
Stefan Roese3d9569b2005-11-27 19:36:26 +0100238 like speed etc. Those speed infos where printed in the board specific
239 code. This new implementation now prints all CPU infos in the common
240 cpu specific code. No board specific code is needed anymore and
241 therefore removed from all current 44x implementations.
242 Patch by Stefan Roese, 27 Nov 2005
243
Wolfgang Denkb6f84352005-12-01 01:17:24 +0100244* Adjust TQM834x PHY addresses for latest hardware revision.
245
Wolfgang Denkd00de232005-12-01 00:55:19 +0100246* Increase malloc arena on TQM5200 board to 256 kB.
247 With 64 kb uniform flash sector size the old value of 128 kB was
248 too small.
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100249
Wolfgang Denkd00de232005-12-01 00:55:19 +0100250* Fix miiphy global data initialization (problem on 4xx boards when
251 no ethaddr is assigned). Initialization moved from
252 miiphy_register() to eth_initialize().
Marian Balakowiczd9785c12005-11-30 18:06:04 +0100253
254 Based on initial patch for 4xx platform by Matthias Fuchs.
255
Wolfgang Denkf08abe32005-11-25 16:38:03 +0100256* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
257
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +0100258* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
259 The COPYING file was extended to make clear that these files can be
260 used in non-GPL code, too.
Wolfgang Denkf08abe32005-11-25 16:38:03 +0100261 Also, a corresponding note was placed in the headers of the affected files.
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +0100262
Stefan Roese5568e612005-11-22 13:20:42 +0100263* Add support for Prodrive P3P440 board:
264 - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
265 - CFG_FLASH_QUIET_TEST added to use the common CFI driver
266 for bank autodetection
267 Patch by Stefan Roese, 22 Nov 2005
268
Wolfgang Denkfe126d82005-11-20 21:40:11 +0100269* Change all '$(...)' variable references into '${...}'
270 which makes the environment compatible with the hush shell.
271 WARNING: Support for the old '$(...)' syntax will be
272 discontinued in a later version.
273
Rafal Jaworowski5a164c82005-11-17 00:26:18 +0100274* Minor changes to init flags in TQM834x PCI.
275
Stefan Roese3ca37762005-11-15 16:26:34 +0100276* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
277 Patch by Stefan Roese, 15 Nov 2005
278
Stefan Roesefeaedfc2005-11-15 10:35:59 +0100279* New PPC 405EP board added: CMS700
280 Added CONFIG_NET_MULTI for VOM405 board.
281 Added reset_phy() for VOM405 board.
282 Patch by Matthias Fuchs, 09 Nov 2005
283
Stefan Roeseea339202005-11-08 09:00:09 +0100284* Updated PCI mapping for esd CPCI2DP board.
285 Add support for error LED.
286 Patch by Matthias Fuchs, 07 Nov 2005
287
Stefan Roese527b5a52005-11-07 13:43:06 +0100288* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
289 Patch by Stefan Roese, 07 Nov 2005
290
Stefan Roese182e1062005-11-07 09:57:57 +0100291* Correct PPC Timebase register definitions (SPRN_TBRL...)
292 Patch by Stefan Roese, 07 Nov 2005
293
Stefan Roesef190c112005-11-05 15:50:16 +0100294* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
295 Patch by Stefan Roese, 05 Nov 2005
296
Stefan Roeseef04a0a2005-11-03 08:31:33 +0100297* Additional fix for external IRQ config on Yellowstone & Yosemite
298 Patch by Stefan Roese, 03 Nov 2005
299
Stefan Roese57275b62005-11-01 10:08:03 +0100300* Add support for Ocotea pass 3 with 440GX Rev. F
301 Patch by Stefan Roese, 01 Nov 2005
302
Stefan Roesee1902902005-10-28 12:21:06 +0200303* Fix external IRQ configuration on Yellowstone & Yosemite
304 Patch by Stefan Roese, 28 Oct 2005
305
Marian Balakowicz99eb35d2005-10-29 14:48:59 +0200306* Add support for multiple PHYs.
Wolfgang Denkbe360d92005-10-29 23:50:20 +0200307 Tested on the following boards:
308 cmcpu2 (at91rm9200/ether.c)
309 PPChameleon (ppc4xx/4xx_enet.c)
310 yukon (mpc8220/fec.c)
311 uc100 (mpc8xx/fec.c)
312 tqm834x (mpc834x/tsec.c) with EEPRO100
313 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
314 Main changes include:
315 common/miiphyutil.c
316 - miiphy_register routine was added to allow multiple PHYs to be registered
317 - miiphy_read and miiphy_write are now defined in this file, and
318 require additional argument (char *devname)
319 - other miiphy_* routines also require additional device name argument
320 ../lib_i386/board.c
321 ../lib_ppc/board.c
322 Calling reset_phy() was moved to be executed *after* eth_initialize().
323 This is necessary as now some of the implementations of reset_phy()
324 may need to use miiphy_reset() which is not allowed before eth_initialize()
325 as eth_initialize registers all required miiphy_* routines.
326 Tested on IP860 and PHY initializes properly after this change.
Marian Balakowicz99eb35d2005-10-29 14:48:59 +0200327
328* Correct includes for flat tree builder.
329
330* Fix conflicting types (flash_write()) in trab auto_update.c.
331
Rafal Jaworowski6902df52005-10-17 02:39:53 +0200332* Add PCI support for the TQM834x board.
333
Stefan Roesee9f11102005-10-20 16:40:17 +0200334* Add missing 4xx board to MAKEALL
335 Patch by Stefan Roese, 20 Oct 2005
336
Stefan Roesea5477752005-10-20 16:39:16 +0200337* Fix conflicting types (flash_write()) in esd auto_update.c
338 Patch by Stefan Roese, 20 Oct 2005
339
Stefan Roesec4c13df2005-10-20 16:36:44 +0200340* Fix problem with sleep in NetConsole (use get_timer())
341 Patch by Stefan Roese, 20 Oct 2005
342
Stefan Roese1e25f952005-10-20 16:34:28 +0200343* Add NetConsole Support for AMCC eval boards
344 Patch by Stefan Roese, 20 Oct 2005
345
Stefan Roesea93316c2005-10-18 19:17:12 +0200346* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
347 Patch by Stefan Roese, 18 Oct 2005
348
Stefan Roese3b6748e2005-10-14 15:37:34 +0200349* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
Wolfgang Denk326bf402005-10-17 00:24:00 +0200350 Fix identation on ext2ls help entry.
Stefan Roese3b6748e2005-10-14 15:37:34 +0200351 Patch by Stefan Roese, 14 Oct 2005
352
Wolfgang Denk20a374f2005-10-15 18:43:50 +0200353* Add support for TQM834x boards.
354 Cleanup.
355
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200356* Cleanup for GCC-4.x
357
Wolfgang Denk17a8b272005-10-13 10:41:25 +0200358* Add documentation for Open Firmware Flat Tree and usage.
359 Patch by Pantelis Antoniou, 13 Oct 2005
360
Wolfgang Denk814d98f2005-10-13 01:59:29 +0200361* Add missing files for Pantelis Antoniou's patch
362 Patch by Pantelis Antoniou, 04 Sep 2005
363
Stefan Roese4f92ac32005-10-10 17:43:58 +0200364* Fix problem in ppc4xx eth-driver without ethaddr (only without
365 CONFIG_NET_MULTI set)
366 Patch by Stefan Roese, 10 Oct 2005
367
Stefan Roesec29ab9d2005-10-08 10:19:07 +0200368* Fix gzip bmp support (test if malloc fails, warning when truncated).
369 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
370 Patch by Stefan Roese, 07 Oct 2005
371
Wolfgang Denk070610c2005-10-13 01:49:09 +0200372* Add support for OF flat tree for the STXtc board.
373 Patch by Pantelis Antoniou, 04 Sep 2005
374
Wolfgang Denkf57f70a2005-10-13 01:45:54 +0200375* Support passing of OF flat trees to the kernel.
376 Patch by Pantelis Antoniou, 04 Sep 2005
377
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200378* Cleanup
379
380* Add support for NetSilicon NS7520 processor.
381 Patch by Art Shipkowski, 12 May 2005
382
Wolfgang Denk7521af12005-10-09 01:04:33 +0200383* Add support for AP1000 board.
384 Patch by James MacAulay, 07 Oct 2005
385
Wolfgang Denk95f9dda2005-10-09 00:33:37 +0200386* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
387 Patch by Anders Larsen, 07 Oct 2005
388
389 The Atmel errata #11 states that the transfer buffer descriptor
390 table must be aligned on a 16-word boundary. As it turned out, this
391 is insufficient - it seems the table must be aligned on a boundary
392 at least as large as the table itself (in Linux this is not an
393 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
394
Wolfgang Denk47340a42005-10-09 00:25:58 +0200395* Fixed compilation for ARM when using a (standard) hard-FP toolchain
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200396 Patch by Anders Larsen, 07 Oct 2005
Wolfgang Denk47340a42005-10-09 00:25:58 +0200397
Wolfgang Denk96782c62005-10-09 00:22:48 +0200398* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
399 sed the linker scripts, rather than pre-process them.
400 Patch by Peter Pearse, 07 Oct 2005
401
Wolfgang Denk87cb6862005-10-06 17:08:18 +0200402* Update make target for ARM supported boards.
403 Use lowlevel_init() instead of platformsetup() [rename].
404 Patch by Peter Pearse, 06 Oct 2005
405
Wolfgang Denkbccae902005-10-06 01:50:50 +0200406* Fix booting from serial dataflash on AT91RM9200
407 Patch by Peter Menzebach, 29 Aug 2005
408
Wolfgang Denk6ebc7922005-10-06 01:46:57 +0200409* Add JFFS2 support for TRAB board
410 Patch by Martin Krause, 25 Aug 2005
411
Wolfgang Denk5ae31ee2005-10-06 01:43:39 +0200412* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
413 Patch by Marcus Hall, 24 Aug 2005
414
Wolfgang Denkf5c254d2005-10-06 01:26:16 +0200415* Fix the machine-id of the Cogent csb637 board
416 Patch by Anders Larsen, 05 Oct 2005
417
Wolfgang Denk78da6072005-10-06 01:22:22 +0200418* Complete support for the KwikByte KB920x boards
419 Patch by Anders Larsen, 05 Oct 2005
420
Wolfgang Denkc0e82d52005-10-05 02:06:08 +0200421* Set the AT91RM9200 clock to asynchronous mode
422 Patch by Anders Larsen, 03 May 2005
423
Wolfgang Denk3b9dfdd2005-10-05 02:02:25 +0200424* Set the AT91RM9200 clock to synchronous mode
425 Patch by Anders Larsen, 29 Apr 2005
426
Wolfgang Denk645da512005-10-05 02:00:09 +0200427* Add support for Cogent csb637
428 Patch by Anders Larsen, 29 Apr 2005
429
Wolfgang Denkfef636b2005-10-05 01:54:04 +0200430* Fix dm9161.c initialization
431 Patch by Anders Larsen, 29 Apr 2005
432
Wolfgang Denk080bdb72005-10-05 01:51:29 +0200433* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
434 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
435
436* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
437 Patch by Anders Larsen, 29 Apr 2005
438
Wolfgang Denk29ca46c2005-10-05 00:25:17 +0200439* Fix device partition intialization for SystemACE disks.
440 Patch by Stephen Williams, 28 Apr 2005
441
Wolfgang Denk99b0d282005-10-05 00:19:34 +0200442* Added support for KwikByte KB920x boards (based on AT91RM9200)
443 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
444
Wolfgang Denk45237bc2005-10-05 00:03:55 +0200445* Add support for S29GL064M-R3 flash chip on xsengine board
446 Patch by Kurt Stremerch, 18 Apr 2005
447
Wolfgang Denk7d314992005-10-05 00:00:54 +0200448* E500 update: repoint IVPR to RAM when code is relocated
449 Patch by Kylo Ginsberg, 13 Apr 2005
450
Wolfgang Denke5e98ed2005-10-04 23:38:07 +0200451* Fix loop end test in lib_generic/string.c:strswab()
452 Patch by Andrew Dyer, October 10, 2005
453 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
454
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200455* Cleanup
456
457* Update ARM Integrator boards:
458 Correct addessing errors in platform files.
459 Split off common core module data from Integrator header files to
460 include/armcoremodule.h.
461 Patch by Peter Pearse, 04 Oct 2005
462
Wolfgang Denk1820d4c2005-10-04 22:38:24 +0200463* Make sure only supported compiler options are used
464 Import "cc-option" shell function from kernel and
465 use it to get the correct ARM GCC options for individual CPUs
466 Patch by Peter Pearse, 30 Jun 2005
467
Stefan Roese9a8d82f2005-10-04 15:00:30 +0200468* Fix 440GR to print correct cpu revision
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200469 Patch by Stefan Roese, 04 Oct 2005
Stefan Roese9a8d82f2005-10-04 15:00:30 +0200470
Stefan Roese93b17ec2005-10-03 15:27:50 +0200471* Change board message on AMCC Yosemite & Yellowstone to common style
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200472 Patch by Stefan Roese, 03 Oct 2005
Stefan Roese93b17ec2005-10-03 15:27:50 +0200473
Wolfgang Denkd9631ec2005-09-30 15:18:23 +0200474* Fix compiler warning
475
Wolfgang Denk709d8ec2005-09-29 12:16:38 +0200476* Fix FEC PHY addresses for TQM85xx boards
477
Wolfgang Denke98f68b2005-09-28 01:49:47 +0200478* Fix uninitialized variable problem in hush shell
479 Patch by Lars Rostock, 26 Sep 2005
480
Wolfgang Denkfb34a9a2005-09-26 23:40:37 +0200481* Undo change of f6e20fc6ca... to include/configs/trab.h
482 (Must have been an accident?)
483
Wolfgang Denkd8e7e0f2005-09-26 01:26:56 +0200484* Add support for AT91RM9200 OHCI Controller.
485 Patch by Eric Benard, 07 Apr 2005
486
Wolfgang Denk98404642005-09-26 01:18:22 +0200487* Update ARM mach-types.h
488 Patch by Eric Benard, 07 Apr 2005
489
Wolfgang Denk0e4018d2005-09-26 01:14:38 +0200490* Add support for MP2USB board.
491 Patch by Eric Benard, 07 Apr 2005
492
Wolfgang Denkc570b2f2005-09-26 01:06:33 +0200493* Add board support for armadillo HT1070
494 Patch by Rowel Atienza, 06 Apr 2005
495
Wolfgang Denkc2d0ab42005-09-26 00:53:02 +0200496* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
497 Patch by Vitaly Bordug, 30 Mar 2005
498
Wolfgang Denke6f22282005-09-26 00:44:15 +0200499* Add iopset command on mpc8xx
500 Patch by Daniel Eisenhut, 25 Mar 2005
501
Wolfgang Denka9127332005-09-26 00:39:59 +0200502* Add support for MII in eepro100 driver.
503 Patch by Gleb Natapov, 21 Mar 2005
504
Wolfgang Denkf2af3eb2005-09-26 00:29:53 +0200505* Fixes to the Lubbock (PXA 25x) support:
506 - Resolve the FIXME with respect to saving the u-boot environment.
507 - Make the default load address land in real memory.
508 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
509 Patch by David Brownell, 10 Mar 2005
510
Wolfgang Denk8e6f1a82005-09-25 18:59:36 +0200511* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
512 Patch by Marc Leeman, 04 Mar 2005
513
Wolfgang Denk49a75812005-09-25 18:41:04 +0200514* OMAP242x H4 board update
515 - fix for ES2 differences.
516 - switch to using the cfi_flash driver.
517 - fix SRAM build address.
518 - fix for GP device operation.
519 - unlock SRAM for GP devices.
520 - display more device information.
521 - fix potential deadlock in omap24xx_i2c driver.
522 - fix DLL load values to match dpllout*1 operation.
523 - fix 2nd chip select init for combo DDR device.
524 - add support for CFI Intel 28F256L18 on H4 board.
525 Patch by Richard Woodruff, 03 Mar 2005
526
Wolfgang Denk8e2be512005-09-25 17:14:20 +0200527* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
528 Patch by Steven Scholz, 02 Mar 2005
529
Wolfgang Denka188b582005-09-25 17:05:57 +0200530* Fix typo in eth.c
531 Patch by Ara Avanesyan, 24 Feb 2005
532
Wolfgang Denk31466292005-09-25 17:02:27 +0200533* Remove unneeded #include <malloc.h>
534 Patch by Ladislav Michl, 22 Feb 2005
535
Wolfgang Denkb66eb522005-09-25 16:59:36 +0200536* Add cramfs support for m68k
537 Patch by Zachary Landau, 21 Feb 2005
538
Wolfgang Denkbd516262005-09-25 16:56:15 +0200539* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
Wolfgang Denk716c1dc2005-09-25 18:49:35 +0200540 Patch by Jeff Angielski, 21 Feb 2005
541
Wolfgang Denk7a22cd52005-09-25 16:50:33 +0200542* Fix au1x00_serial baud rate calculation:
543 remove hardcoded cpu clock divisor and use register instead;
544 round up instead of truncate
545 Patch by Andrew Dyer, 15 Feb 2005
546
Wolfgang Denk875c7892005-09-25 16:44:21 +0200547* Add Xilinx Spartan3 family FPGA support
Wolfgang Denk7a22cd52005-09-25 16:50:33 +0200548 Patch by Kurt Stremerch, 14 Feb 2005
Wolfgang Denk875c7892005-09-25 16:44:21 +0200549
Wolfgang Denkdb421e62005-09-25 16:41:22 +0200550* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
551 Patch by Zachary Landau, 11 Feb 2005
552
Wolfgang Denkc177bb52005-09-25 16:31:16 +0200553* Fix VOH405 Support
554 Patch by Matthias Fuchs, 25 Sep 2005
555
Wolfgang Denk1972dc02005-09-25 16:27:55 +0200556* Added support for PCI bridge on MPC8272ADS
557 Patch by Vitaly Bordug, Feb 09 2005
558
Wolfgang Denk0148e8c2005-09-25 16:22:14 +0200559* Update multicore CM9XX support for Integrator AP to allow booting from flash
560 Patch by Jean-Paul Saman, 8 Feb 2005
561
Wolfgang Denk389db1f2005-09-25 16:15:17 +0200562* Fix strswab() to reliably find end of string
563 Patch by Andrew Dyer, 08 Feb 2005
564
Wolfgang Denk6ed6ce62005-09-25 16:01:42 +0200565* Fix typos in include/ppc440.h
566 Patch by Andrew E Mileski, 04 Feb 2005
567
Wolfgang Denk2df741b2005-09-25 15:57:49 +0200568* Add Vibren (was Accelent) PXA255 IDP Support
569 Patch by Cliff Brake, 04 Feb 2005
570
Wolfgang Denkfd4bb672005-09-25 15:39:00 +0200571* Fix tools/bmp_logo.c using incorrect offset to pixel data
572 Patch by Andrew Dyer, 31 Jan 2005
573
Wolfgang Denk74f43042005-09-25 01:48:28 +0200574* Add ARM946E cpu and core module targets; remap memory to 0x00000000
575 Patch by Peter Pearse, 2 Feb 2005
576
Wolfgang Denke2146b62005-09-25 01:20:38 +0200577* Fix error handling in tools/env/fw_env.c
578 Patch by Ara Avanesyan, 01 Feb 2005
579
Wolfgang Denk9f221d02005-09-25 01:09:58 +0200580* Fix MGT5100 PSC baudrate calculation
581 Patch by Sebastian Schau, 27 Jan 2005
582
Wolfgang Denkc97a2aa2005-09-25 00:59:24 +0200583* OMAP242x fix for GP device booting
584 - Add SRAM unlock for GP devices.
585 - Change DDR DLL unlock value to allow DPLLout*1 operation.
586 Patches by Richard Woodruff, 21 Jan 2005:
587
Wolfgang Denk265817c2005-09-25 00:53:22 +0200588* Add support for AMD's Pb1x00 eval board;
589 add MII routines to the au1x00 ethernet driver;
590 add USB ohci driver (work in progress)
591 Patch by Thomas Sailer, 20 Jan 2005
592
Wolfgang Denkb63de2c2005-09-25 00:23:05 +0200593* Update omap5912osk board
594 Use drivers/cfi_flash.c instead of private flash driver;
595 Remove hardcoded personalized settings from omap5912osk.h;
596 Fix spacing with (RO) marks in 'flinfo' output.
597 Patch by Michael Bendzick, 14 Jan 2005
598
Wolfgang Denk3706ba12005-09-25 00:00:45 +0200599* Fix warnings for PCI code on ixp
600 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
601
Wolfgang Denk9a9200b2005-09-24 23:41:00 +0200602* virtex2 fix for bogus download error messages
603 The virtex2 FPGA download code watches for init going active during
604 a download of config data as an error condition. init also goes
605 active after a configuration is finished in concert with the done
606 signal. So far, the code does not check for done active until all
607 of the configuration data is sent. If configuration data has a few
608 extra pad bytes at the end, this would cause an error message even
609 though the download had suceeded.
610 NOTE: virtex2 slave serial and spartan2 versions may still have the
611 same problem.
612 Patch by Andrew Dyer, 12 Jan 2005
613
Wolfgang Denkdafbe372005-09-24 23:32:48 +0200614* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
615 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
616 message when probing for nonexistent flash in little endian mode.
617 As a side effect more efficient and smaller code is generated,
618 which is always a Good Thing (TM).
619 Patch by Ladislav Michl, 24 Sep 2005
620
Wolfgang Denk28cb9372005-09-24 23:25:46 +0200621* Update for TFTP using a fixed UDP port
622 Use the approved environment variable names. Added "tftpdstp" to
623 allow ports other than 69 per Tolunay Orkun's recommendation.
624 Patch by Jerry Van Baren, 12 Jan 2005
625
Wolfgang Denkecb0ccd2005-09-24 22:37:32 +0200626* Allow to force TFTP to use a fixed UDP port
627 (Add a configuration option CONFIG_TFTP_PORT and optional env
628 variable tftpport)
629 Patch by Jerry Van Baren, 10 Jan 2005
630
Wolfgang Denk4bc12f12005-09-24 22:05:40 +0200631* Fix ethernet timeouts on dbau1550 and other au1x00 systems
632 Patch by Leif Lindholm, 29 Dec 2004
633
Wolfgang Denk2b792af2005-09-24 21:54:50 +0200634* Cleanup: fix broken builds
635
636* Fix PHY address argument passing with mii info command
637 Patch by Andrew Dyer, 28 Dec 2004
638
Wolfgang Denk0c8721a2005-09-23 11:05:55 +0200639* Cleanup (PPC4xx is AMCC now)
640
Stefan Roese7644f162005-09-22 09:16:57 +0200641* esd CPCI2DP board added
642 Patch by Matthias Fuchs, 22 Sep 2005
643
Stefan Roese026cb5d2005-09-22 09:07:15 +0200644* esd PMC405 board updated
645 Patch by Matthias Fuchs, 22 Sep 2005
646
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200647* Add SM501 support to HH405 board.
648 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
649 Add support for eeprom write-enable (CFG_EEPROM_WREN).
650 Patch by Stefan Roese, 22 Sep 2005
651
Wolfgang Denk1caa7072005-09-22 09:34:17 +0200652* Fix autonegotiation in tsec ethernet driver
653 Patch by Stefan Roese, 21 Sep 2005
654
Wolfgang Denk8b4c9e72005-09-21 15:31:25 +0200655* Fix bug in auto_update (trab board)
656 Patch by Martin Krause, 16 Sep 2005
657
Wolfgang Denk59d80bf2005-09-21 15:24:52 +0200658* Fix computation of framebuffer palette for 8bpp LCD bitmaps
659 Patch by Francesco Mandracci, 16 Sep 2005
660
Wolfgang Denk1806c752005-09-21 10:07:56 +0200661* Update configuration for INKA4x0 board
662
Wolfgang Denk29fe1c02005-09-21 09:59:55 +0200663* Update configuration for PM854 board
664 Based on patch by R. Loeffl, 20 Jul 2005
665
Stefan Roese053b40f2005-09-15 14:41:11 +0200666* Add PCI support to TQM8540 and TQM8560 boards
667 Patch by Stefan Roese, 15 Sep 2005
668
Stefan Roese34c0a5e2005-09-15 11:34:07 +0200669* Update AMCC Yosemite to get a consistent setup for all AMCC eval
670 boards (baudrate, environment...). Flash driver fixed.
671 Patch by Stefan Roese, 15 Sep 2005
672
Stefan Roese4a3cd9e2005-09-07 16:21:12 +0200673* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
674 ethernet port on ebony.
675 Patch by Stefan Roese, 7 Sep 2005
676
Marian Balakowicz7d454772005-09-11 15:27:12 +0200677* Added support for mtddevnum and mtddevname variables (mtdparts command)
678
Wolfgang Denk670d9f12005-09-13 00:12:33 +0200679* Change default console baud rate for stxxtc board
680
Stefan Roese9d2a8732005-08-31 12:55:50 +0200681* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Stefan Roese9d2a8732005-08-31 12:55:50 +0200682 Patch by Stefan Roese, 31 Aug 2005
683
Wolfgang Denk80e238c2005-09-03 02:22:41 +0200684* Fix default command set (don't include CFG_CMD_DISPLAY command)
685 Patch by Pantelis Antoniou, 02 Sep 2005
686
Wolfgang Denk6d51e502005-09-03 01:58:35 +0200687* Cleanup
688
Wolfgang Denk7b3e3c52005-09-03 01:23:25 +0200689* Enable SM712 driver support for HMI1001 board.
690
Wolfgang Denk77f65802005-08-31 12:30:09 +0200691* Fix problems with ld version 2.16 (dot outside sections problem)
692 Pointed out by Gerhard Jaeger, 31 Aug 2005;
693 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
694
695* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
696
697* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
698
699* Add keyboard and dot matrix display support for HMI1001 board.
700
701* Prepare U-Boot for gcc-4.x
702
Wolfgang Denk61dada82005-08-24 12:41:18 +0200703* Fixed Bamboo port to enable running without DDR-DIMM
704 (Bamboo has also 64MB onboard DDR)
Stefan Roesea3e4fcb2005-08-24 11:21:36 +0200705 Patch by Stefan Roese, 24 Aug 2005
706
Wolfgang Denka9fe9f42005-08-23 23:04:40 +0200707* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
708 now handling all 4xx cpu's
709 Patch by Stefan Roese, 16 Aug 2005
710
Wolfgang Denk2ac47852005-08-23 22:29:44 +0200711* Fix make dependencies for at91rm9200 and ks8695 cpus
712 Patch by Steven Scholz, 23 Aug 2005
713
Wolfgang Denkd534f5c2005-08-23 22:27:41 +0200714* Add JFFS2 support for TQM5200 board
715
Stefan Roese5e4b3362005-08-22 17:51:53 +0200716* Add esd cpci5200 and pf5200 boards
717 Patch by Reinhard Arlt, 22 Aug 2005
718
Wolfgang Denk94085692005-08-19 00:55:12 +0200719* Fix sysclock for TQM8540 and TQM8560 boards
720 Patch by Martin Krause, 25 Jul 2005
721
Wolfgang Denkc7db9a32005-08-19 00:53:02 +0200722* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
723 Patch by Martin Krause, 08 Jun 2005
724
Wolfgang Denk6617aae2005-08-19 00:46:54 +0200725* Add new board specific commands for TQM5200/STK52XX
726 - Sound commands (beep, wav, sound)
727 - Test commands (led, can, backlight, rs232)
728 Patch by Martin Krause, 02 May 2005
729
730* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
Wolfgang Denkdf3c7c82005-08-19 00:36:45 +0200731 because of a bug in the AT91RM9200 CPU PLL
732 Patch by Martin Krause, 22 Apr 2005
733
Wolfgang Denk601aed12005-08-19 00:08:55 +0200734* Add automatic HW detection for another CMC_PU2 variant
735 Patch by Martin Krause, 20 Apr 2005
736
Wolfgang Denkdbc58192005-08-18 12:21:16 +0200737* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
738 Patch by Martin Krause, 19 Apr 2005
739
Wolfgang Denke8aa8242005-08-18 11:55:22 +0200740* Fix initialization problem on TQM5200 without SM501
Wolfgang Denk601aed12005-08-19 00:08:55 +0200741 Patch by Martin Krause, 08 Apr 2005
Wolfgang Denke8aa8242005-08-18 11:55:22 +0200742
Wolfgang Denk4f562f12005-08-18 11:51:12 +0200743* Add RTC support for STK52XX.200
Wolfgang Denk601aed12005-08-19 00:08:55 +0200744 Patch by Martin Krause, 07 Apr 2005
Wolfgang Denk4f562f12005-08-18 11:51:12 +0200745
Wolfgang Denkdf04a3d2005-08-18 01:22:22 +0200746* Add support for IFM o2dnt board
747
Wolfgang Denk98128f32005-08-16 15:17:53 +0200748* Enable PCI on hmi1001 board
749
Wolfgang Denk87b8bd52005-08-16 09:32:45 +0200750* Fix return values of the jffs2 commands ls/fsload/fsinfo,
751 so we can use them to, e.g., check the existence of a file with
752 "if ls foo; then this; else that; fi" in the hush shell
753 Patch by Andreas Engel, 16 August 2005
754
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200755* Coding style cleanup
756
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200757* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
758 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
759
Stefan Roeseb79316f2005-08-15 12:31:23 +0200760* Check return value of malloc in 440gx_enet.c
761 Patch by Travis B. Sawyer, 18 Jul 2005
762
763* Add Sandburst Metrobox and Sandburst Karef board support packages.
764 Second serial port on 440GX now defined as a system device.
765 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
766 Patch by Travis B. Sawyer, 12 Jul 2005
767
768======================================================================
wdenka1191902005-01-09 17:12:27 +0000769Changes for U-Boot 1.1.3:
770======================================================================
771
Wolfgang Denkb2f50802005-08-12 23:43:12 +0200772* Minor code cleanup
773
Wolfgang Denk50814842005-08-12 23:36:08 +0200774* Add forgotten new fils from latest VoiceBlue update
775
Wolfgang Denk396387a2005-08-12 23:34:51 +0200776* Make bootretry feature work with hush shell.
777 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
778 Patch by Andreas Engel, 19 Jul 2005
779
Wolfgang Denkd992daf2005-08-12 23:27:18 +0200780* Update Hymod Board Database PHP code in "tools" directory
781 Patch by Murray Jensen, 01 Jul 2005
782
Wolfgang Denkf9d77ed2005-08-12 23:23:46 +0200783* Make "tr" command use POSIX compliant; export HOSTOS make variable
784 Patch by Murray Jensen, 30 Jun 2005
785
Wolfgang Denkb3b0fd52005-08-12 23:20:59 +0200786* Fix Murray Jensen's mail address.
787 Patch by Murray Jensen, 30 Jun 2005
788
Wolfgang Denkf89920c2005-08-12 23:15:53 +0200789* Preserve PHY_BMCR during a soft reset.
790 Patch by Carl Riechers, 24 Jun 2005
791
Wolfgang Denke5445282005-08-12 22:56:51 +0200792* VoiceBlue update: eeprom tool can also store firmware version now.
793 eeprom.bin is runable by jumping at load address.
794 Patch by Ladislav Michl, 23 May 2005
795
Wolfgang Denkea99a732005-08-12 22:38:37 +0200796* Move the AT91RM9200DK to the ARM Systems list.
797 Patch by Anders Larsen, 26 Apr 2005
Wolfgang Denkb2f50802005-08-12 23:43:12 +0200798
Wolfgang Denk8d4ba3d2005-08-12 22:35:59 +0200799* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
800 Patch by Anders Larsen, 26 Apr 2005
801
Wolfgang Denk4d302d62005-08-12 22:32:29 +0200802* measure_gclk() is needed when DEBUG is enabled
803 Patch by Bryan O'Donoghue, 25 Apr 2005
804
Stefan Roese8534bf92005-08-12 20:06:52 +0200805* Add UPD-Checksum code, fix problem in net.c (return instead of break)
806 Patch by Reinhard Arlt, 12 Aug 2005
807
Stefan Roese5315dfa2005-08-12 16:56:56 +0200808* esd PCI405 board updated
809 Patch by Matthias Fuchs, 28 Jul 2005
810
Stefan Roese82f4c6a2005-08-12 16:52:47 +0200811* esd WUH405 and DU405 board updated
812 Patch by Matthias Fuchs, 27 Jul 2005
813
Stefan Roese9bcf2ab2005-08-12 16:46:35 +0200814* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
815 Patch by Matthias Fuchs, 4 May 2005
816
Stefan Roese84286382005-08-11 18:03:14 +0200817* Update AMCC Yosemite to get a consistent setup for all AMCC eval
818 boards (baudrate, environment...). Flash driver fixed.
819 Patch by Stefan Roese, 11 Aug 2005
820
Stefan Roese9e005892005-08-11 17:58:40 +0200821* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
822 Patch by Stefan Roese, 11 Aug 2005
823
Stefan Roesec57c7982005-08-11 17:56:56 +0200824* Add NAND FLASH support for AMCC Bamboo 440EP eval board
825 Patch by Stefan Roese, 11 Aug 2005
826
Wolfgang Denk8f79e4c2005-08-10 15:14:32 +0200827* Add configuration for IFM AEV FIFO board.
828 Minor coding style cleanup.
829
830* Add configuration for IFM SPI eval board
831
Wolfgang Denk9d3338d2005-08-10 10:06:25 +0200832* Fix CompactFlash problem on HMI1001 board
833
Wolfgang Denkc4e0e682005-08-09 21:41:20 +0200834* Make new "mtdparts" code build with older compilers
835 Patch by Andrea Scian, 09 Aug 2005
836
Stefan Roese846b0dd2005-08-08 12:42:22 +0200837* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
838 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
839 with the 405 defines and the linux kernel defines.
840 Patch by Stefan Roese, 08 Aug 2005
841
Wolfgang Denkc19c3132005-08-09 17:25:22 +0200842* Fix compiler warnings with older GCC versions
843
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200844* Add common (with Linux) MTD partition scheme and "mtdparts" command
845
846 Old, obsolete and duplicated code was cleaned up and replace by the
847 new partitioning method. There are two possible approaches now:
848
849 The first one is to define a single, static partition:
850
851 #undef CONFIG_JFFS2_CMDLINE
852 #define CONFIG_JFFS2_DEV "nor0"
853 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
854 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
855 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
856
857 The second method uses the mtdparts command line option and dynamic
858 partitioning:
859
860 /* mtdparts command line support */
861 #define CONFIG_JFFS2_CMDLINE
862 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
863 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
864
865 Command line of course produces bigger images, and may be inappropriate
866 for some targets, so by default it's off.
867
Wolfgang Denk452e8e72005-08-08 00:47:14 +0200868* Fix build problems for PM856 Board
869
Wolfgang Denk8b019da2005-08-08 00:14:41 +0200870* Fix sign extension bug in 'fpga loadb' command;
871 make 'fpga loadb' always print the file header info
872 Patch by Andrew Dyer, 11 Jan 2005
873
Wolfgang Denkfe599e12005-08-07 23:55:50 +0200874* Fix errors that occur when accessing SystemACE CF
875 Patch by Jeff Angielski, 09 Jan 2005
Stefan Roese846b0dd2005-08-08 12:42:22 +0200876
Wolfgang Denk7ebdb192005-08-06 02:11:33 +0200877* Document switching between U-Boot and PlanetCore on RPXlite
878 by Sam Song, 24 Dec 2004
879
Wolfgang Denkd980a162005-08-06 02:03:03 +0200880* Fix PowerQUICC II mask detection.
881 Patch by Eugene Surovegin, 20 Dec 2004
Stefan Roese846b0dd2005-08-08 12:42:22 +0200882
Wolfgang Denkd06a5f72005-08-06 01:56:59 +0200883* Add support for Altera NIOS DK1C20 board
884 Patch by Shlomo Kut, 13 Dec 2004
885
Wolfgang Denkf901a832005-08-06 01:42:58 +0200886* Add support for ep8248 board
887 Patch by Yuli Barcohen, 12 Dec 2004
888
889 Minor code cleanup.
890
Wolfgang Denk56337962005-08-06 01:21:19 +0200891* Fix baudrate setting for KGDB on MPC8260
892 Patch by HoJin, 11 Dec 2004
893
Wolfgang Denk5ad73a82005-08-06 01:13:19 +0200894* Fix 'mii help' text formatting
895 Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denkf901a832005-08-06 01:42:58 +0200896
Wolfgang Denk23a7a322005-08-06 01:11:12 +0200897* Fix return code of NFS command
898 Patch by Hiroshi Ito, 11 Dec 2004
899
Wolfgang Denk38362212005-08-06 01:02:27 +0200900* Fix typo
901
Wolfgang Denkc04a76e2005-08-06 00:11:50 +0200902* Fix compiler warnings in cpu/ppc4xx/usbdev.c
903 Patch by Steven Blakeslee, 04 Aug 2005
904
Stefan Roese17f50f222005-08-04 17:09:16 +0200905* Add support for AMCC Bamboo PPC440EP eval board
906 Patch by Stefan Roese, 04 Aug 2005
907
Jon Loeligerde1d0a62005-08-01 13:20:47 -0500908* Patch by Jon Loeliger
909 Fix style issues primarily in 85xx and 83xx boards.
910 - C++ comments
911 - Trailing white space
912 - Indentation not by TAB
913 - Excessive amount of empty lines
914 - Trailing empty lines
915
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200916* Patch by Ron Alder, 11 Jul 2005
Lunsheng Wangb0e32942005-07-29 10:20:29 -0500917 Add Xianghua Xiao and Lunsheng Wang's support for the
918 GDA MPC8540 EVAL board.
919
Eran Libertyf046ccd2005-07-28 10:08:46 -0500920* Patch by Eran Liberty
921 Add support for the Freescale MPC8349ADS board.
922
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200923* Patch by Jon Loeliger, 25 Jul 2005
Jon Loeliger63be1112005-07-25 15:38:06 -0500924 Move the TSEC driver out of cpu/mpc85xx as it will be shared
925 by the upcoming mpc83xx family as well.
926
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200927* Patch by Jon Loeliger, 05 May 2005
Jon Loeligerd9b94f22005-07-25 14:05:07 -0500928 Implemented support for MPC8548CDS board.
929 Added DDR II support based on SPD values for MPC85xx boards.
930 This roll-up patch also includes bugfies for the previously
931 published patches:
932 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
933
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200934* Patch by Jon Loeliger, 10 Feb 2005
Jon Loeliger288693a2005-07-25 12:14:54 -0500935 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
936
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200937* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
Jon Loeliger7202d432005-07-25 11:13:26 -0500938 For MPC85xxCDS:
939 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
940 for faster flash parts.
941 Add documentation for BR/OR for FLASH.
942
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200943* Patch by Jon Loeliger 08 Feb 2005
Jon Loeligerd65cfe82005-07-25 10:58:39 -0500944 Determine L2 Cache size dynamically on 85XX boards.
945
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200946* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -0500947 - Convert the CPM2 based functionality to use new CONFIG_CPM2
948 option rather than a myriad of CONFIG_MPC8560-like variants.
949 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
950 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
951 new CONFIG_CPM2 option to each 8260 board.
wdenka1191902005-01-09 17:12:27 +0000952
Wolfgang Denkb20d0032005-08-05 12:19:30 +0200953* Add support for MicroSys PM856 board
954 Patch by Josef Wagner, 03 Aug 2005
955
Wolfgang Denk992b4022005-08-05 11:47:10 +0200956* Minor fixes to PM854 board
957 Patch by Josef Wagner, 03 Aug 2005
958
Wolfgang Denk452f6742005-08-04 19:45:01 +0200959* Adjust configuration of XENIAX board
960 (chip select and GPIO required for USB operation)
961
Wolfgang Denk3e0bc442005-08-04 01:24:19 +0200962* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
963 routed to the Watchdog handler
964 Patch by Eugene Surovegin, 18 Jun 2005
965
Wolfgang Denkb20d0032005-08-05 12:19:30 +0200966* (re)enabled scsi commands do_scsi() and do_scsiboot()
Wolfgang Denk460c3222005-08-04 01:14:12 +0200967 Patch by Denis Peter, 06 Dec 2004
968
Wolfgang Denkc43352c2005-08-04 01:09:44 +0200969* Fix endianess problem in TFTP / NFS default filenames
970 Patch by Hiroshi Ito, 06 Dec 2004
971
Wolfgang Denk6dfa4342005-08-03 23:03:54 +0200972* Ignore broadcast status bit in received frames in 8260 FCC ethernet
973 loopback test code
974 Patch by Murray Jensen, 18 Jul 2005
975
Wolfgang Denk507d3b02005-08-03 22:58:55 +0200976* Fix typo in mkconfig script (used == instead of =)
977 Patch by Murray Jensen, 18 Jul 2005
978
Wolfgang Denkdc17fb62005-08-03 22:32:02 +0200979* Cleanup build problems on 64 bit build hosts
980
Wolfgang Denkd3b86c42005-08-03 10:01:54 +0200981* Update MAINTAINERS file
982
Stefan Roese8a316c92005-08-01 16:49:12 +0200983* Patch by Stefan Roese, 01 Aug 2005:
984 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
985 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
986 for details.
987 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
988 to run on both 405GP and 405GPr eval boards).
989
990* Patch by Steven Blakeslee, 27 Jul 2005:
991 - Add support for AMCC PPC440EP/GR.
992 - Add support for AMCC Yosemite PPC440EP eval board.
993 - Add support for AMCC Yellowstone PPC440GR eval board.
994
Wolfgang Denk0f18cb62005-07-31 00:30:09 +0200995* Minor fixes for PPChameleon Board:
996 - fix alignment of NAND size
997 - make code do what the comment says
998
Wolfgang Denkcf991922005-07-30 16:45:16 +0200999* Implement h/w sector protection status synchronization at boot.
1000 The code is provided for, and was tested on, the Yukon/Alaska
1001 and PM520 boards only.
1002
1003 A bug in flash_real_protect() for the Yukon board was fixed by
1004 adding a function that tells if two banks are on one flash chip.
1005
Wolfgang Denk15f36a52005-07-28 10:42:26 +02001006* Fix sysmon POST problem: check I2C error codes
1007 This fixes a problem of displaying bogus voltages when the voltages
1008 are so low that the I2C devices start failing while the rest of the
1009 system keeps running.
1010
Wolfgang Denke82bc622005-07-28 01:50:14 +02001011* Patch by Cedric Vincent, 6 Jul 2005:
1012 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
1013
Wolfgang Denk2d5df632005-07-21 16:14:36 +02001014* Patch by Jon Loeliger, 20 Jul 2005:
1015 Add missing PCI IO port definitions.
1016
Wolfgang Denk08abe152005-07-21 15:23:29 +02001017* Add CompactFlash support for HMI1001 board.
1018
1019* Adjust printed board ID for LWMON board.
1020
Wolfgang Denk1a794732005-07-21 15:29:22 +02001021* Fix low-level OHCI transfers for ARM920t and MPC5xxx
1022
Wolfgang Denkf5301872005-07-21 11:45:50 +02001023* Add new argument format for flash commands to allow for usage like
1024 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
1025 U-Boot will automaticially find the end of the corresponding sector.
1026
stroesecd5b2b92005-07-05 11:35:27 +00001027* Patch by Stefan Roese, 5 Jul 2005:
1028 Update uc100 board PHY setup
1029
stroese3c71f3e2005-07-01 15:53:57 +00001030* Patch by Stefan Roese, 1 Jul 2005:
1031 Fix PHY address for CATcenter board (now correct!)
1032
stroesebf418862005-06-30 13:06:07 +00001033* Patch by Stefan Roese, 30 Jun 2005:
1034 Fix PHY addresses for PPChameleon and CATcenter boards
1035 Change MAINTAINER for most esd boards
1036
wdenk88804d12005-07-04 00:03:16 +00001037* Patch by Detlev Zundel, 30 Jun 2005:
1038 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
1039
wdenk342717f2005-06-27 13:30:03 +00001040* Fix baudrate calculation problem on MPC5200 systems
1041
1042* Add EEPROM and RTC support for HMI1001 board
1043
1044* Patch by Detlev Zundel, 20 Jun 2005:
1045 Fix initialization of low active GPIO pins on inka4x0 board
1046
wdenk024447b2005-06-20 10:28:38 +00001047* Enable redundant environment, disable HW flash protection of
1048 HMI1001 board
1049
wdenkb2532ef2005-06-20 10:17:34 +00001050* Patch by Travis Sawyer, 10 Jun 2005:
1051 Initialize allocated dev and private hw structures
1052 after their respective allocation in 440gx_enet.c
1053
1054* Patch by Steven Scholz, 10 Jun 2005:
1055 Fix byteorder problems with second argument of "bootm" with
1056 standalone images;
1057
wdenka87589d2005-06-10 10:00:19 +00001058* Add support for HMI1001 board
1059
1060* Disable "date" and "sntp" commands on TQM866M
1061
wdenk51152c12005-06-05 20:30:43 +00001062* Fix watchdog reset problems on LWMON board
1063
wdenkba91e262005-05-30 23:55:42 +00001064* Patch by Juergen Selent, 17 May 2005:
1065 Add support for Funkwerk VoVPN gateway module.
1066
1067* Cleanup debug code for MPC8220 FEC driver
1068
wdenk2eab48f2005-05-23 10:49:50 +00001069* Extend burst mode RAM test program to take a loop count
1070 (0 = infinite)
1071
1072* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
1073 those boards that use it.
1074
wdenk3a574cb2005-05-19 22:39:42 +00001075* Patches by Greg Ungerer, 19 May 2005:
1076 - add support for the KS8695P (ARM 922 based) CPU
1077 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
1078
1079* Patch by Steven Scholz, 19 May 2005:
1080 Add support for CONFIG_SERIAL_TAG on ARM boards
1081
wdenk7680c142005-05-16 15:23:22 +00001082* Add PCI support for Sorcery board.
1083 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
1084
wdenkc0176632005-05-16 14:19:49 +00001085* Fix compile problems caused by new burst mode SDRAM test;
1086 make port pins to trigger logic analyzer configurable
1087
wdenk343117b2005-05-13 22:49:36 +00001088* Fix timer handling on MPC85xx systems
1089
wdenk9dd41a72005-05-12 22:48:09 +00001090* Fix debug code in omap5912osk flash driver
1091
1092* Add support for MPC8247 based "IDS8247" board.
1093
wdenkd44e14b2005-05-10 15:51:35 +00001094* Add support for 2 x TSEC interfaces on the TQM8540 board.
1095
wdenked16fef2005-05-09 10:17:32 +00001096* On LWMON we must use the watchdog to reset the board as the CPU
1097 genereated HRESET pulse is too short to reset the external
1098 circuitry.
1099
wdenk931da932005-05-07 19:06:32 +00001100* Add test tool to exercise SDRAM accesses in burst mode
1101 (as standalone program, MPC8xx/PowerPC only)
1102
wdenk60fc6cb2005-05-05 09:13:21 +00001103* Increase CFG_MONITOR_LEN for Rattler board to match actual code
1104 size.
1105
wdenk07cc0992005-05-05 00:04:14 +00001106* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenk412babe2005-05-05 09:51:44 +00001107 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
1108 added to support LZO and LZARI compression modes (undefined by
1109 default).
wdenk07cc0992005-05-05 00:04:14 +00001110
wdenkcf8bc572005-05-04 23:50:54 +00001111* Fix problem with symbolic links in JFFS2 code.
1112
wdenka710d4b2005-05-04 23:44:59 +00001113* Use linker ASSERT statement to prevent undetected overlapping of
1114 sections on PPChameleon board; other boards might use this, too.
1115
stroese434cf852005-05-03 06:19:57 +00001116* Patch by Stefan Roese, 03 May 2005:
1117 Update for P3G4
1118 Fix problems in cmd_universe.c
1119
1120* Patch by Matthias Fuchs, 03 May 2005:
1121 Added missing variable declaration in cmd_nand.c
1122 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
1123
wdenk9f709b62005-04-22 15:09:09 +00001124* Fix INKA4x0: use CS1 as gpio_wkup_6 output
1125
wdenka6310922005-04-21 21:10:22 +00001126* Fix bug in the SDRAM initialization code for canmb, IceCube and
1127 PM520 boards.
1128 Fix PHY address for canmb board.
1129
wdenk7cc14382005-04-20 14:38:59 +00001130* Cleanup serial console baudrate calculation on AT91RM9200;
1131 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenkec0ca732005-04-20 12:36:05 +00001132
stroesefddae7b2005-04-20 06:52:40 +00001133* Patch by Matthias Fuchs, 18 Apr 2005:
1134 Make PCI target address spaces on PMC405 and CPCI405 boards
1135 configurable via environment variables
1136
wdenkb2323ea2005-04-20 09:28:54 +00001137* Auto-size RAM on canmb board.
1138
wdenk5e5f9ed2005-04-13 23:15:10 +00001139* Add support for canmb board
1140
stroese4c2a3662005-04-13 10:08:39 +00001141* Patch by Stefan Roese, 13 Apr 2005:
1142 Update for esd apc405
1143
wdenk2a8af182005-04-13 10:02:42 +00001144* Fixes for TQM8560 board:
1145 - fix clock rates
1146 - remove debug messages
1147 - fix flash sector protection
1148
wdenkb77fad32005-04-07 22:36:40 +00001149* Patch by Steven Scholz, 07 Apr 2005:
1150 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
1151
wdenk2a8af182005-04-13 10:02:42 +00001152* Patches by Steven Scholz, 07 Apr 2005:
wdenkb77fad32005-04-07 22:36:40 +00001153 Fix compiler warning in altera.c
wdenk2a8af182005-04-13 10:02:42 +00001154 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenkb77fad32005-04-07 22:36:40 +00001155
1156* Patch by Ladislav Michl, 06 Apr 2005:
1157 Fix voiceblue configuration.
1158
stroese7ec25502005-04-07 05:35:12 +00001159* Patch by Stefan Roese, 06 Apr 2005:
1160 Updates for OCOTEA board:
1161 - Changed U-Boot size from 512kByte to 256kByte
1162 - Fixed flash driver to support boot from soldered user flash
1163 - Added README for switch from PIBS firmware to U-Boot
1164
1165* Patch by Travis Sawyer, 05 Apr 2005:
1166 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
1167 Problem found by Andrew Wozniak.
1168
wdenka85f9f22005-04-06 13:52:31 +00001169* Patch by Steven Scholz, 06 Apr 2005:
1170 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
1171 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
1172
wdenk20787e22005-04-06 00:04:16 +00001173* Patches by Robert Whaley, 29 Nov 2004:
1174 - update the pxa-regs.h file for PXA27x chips
1175 - add PXA27x based ADSVIX board
1176 - add support for MMC on PXA27x processors
1177
1178* Patch by Andrew E. Mileski, 28 Nov 2004:
1179 Fix PPC4xx SPD SDRAM detection bug
1180
1181* Patch by Hiroshi Ito, 26 Nov 2004:
1182 Fix logic of "test -z" and "test -n" commands
1183
wdenk3c2b3d42005-04-05 23:32:21 +00001184* Patch by Ladislav Michl, 05 Apr 2005:
1185 Add support for VoiceBlue board.
1186
1187* Patch by Ladislav Michl, 05 Apr 2005:
1188 Fix netboot_common() prototypes.
1189
wdenkb304c962005-04-05 22:30:50 +00001190* Patch by Steven Scholz, 05 Apr 2005:
1191 Use i.MX watchdog timer for reset_cpu()
1192
1193* Patch by Steven Scholz, 05 Apr 2005:
1194 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
1195 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
1196 (now in interupts.c)
1197
wdenk12b43d52005-04-05 21:57:18 +00001198* Add support for MPC8220 based "sorcery" board.
1199
1200* Add support for TQM8560 board.
wdenkf5c5ef42005-04-05 16:26:47 +00001201
wdenk3dd7f0f2005-04-04 23:43:44 +00001202* Add FEC support for TQM8540 board.
1203 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
1204
1205* Patch by Martin Krause, 04 Apr 2005:
1206 Update default configuration for CMC_PU2 board.
1207
wdenkba83a302005-04-04 12:23:03 +00001208* Patch by Steven Scholz, 04 Apr 2005:
wdenk8aa1a2d2005-04-04 12:44:11 +00001209 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
1210 - introduce two new configuration options instead:
1211 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
1212
1213* Patch by Steven Scholz, 04 Apr 2005:
wdenkba83a302005-04-04 12:23:03 +00001214 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
1215
wdenk101e8df2005-04-04 12:08:28 +00001216* Fix timer code for ARM systems: make sure that udelay() does not
1217 reset timers so it's save to use udelay() in timeout code.
1218
wdenk50712ba2005-04-03 23:35:57 +00001219* Patch by Mathias Küster, 23 Nov 2004:
1220 add udelay support for the mcf5282 cpu
1221
1222* Patch by Tolunay Orkun, 16 November 2004:
1223 fix incorrect onboard Xilinx CPLD base address
wdenk3c2b3d42005-04-05 23:32:21 +00001224
wdenk901787d2005-04-03 23:22:21 +00001225* Patch by Jerry Van Baren, 08 Nov 2004:
1226 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
1227 the jumper for the HRCW source should select flash. If lowboot is
1228 not selected, the jumper for the HRCW source should select the
1229 BCSR.
1230 - change default load base address to 0x00400000
1231
wdenk8b0bfc62005-04-03 23:11:38 +00001232* Patch by Yuli Barcohen, 08 Nov 2004:
1233 Add support for Analogue & Micro Rattler boards.
1234 Tested on Rattler8248.
1235
1236* Patch by Andre Renaud, 08 Nov 2004:
1237 Fix watchdog support in common/lcd.c
1238
1239* Patch by Marc Leeman, 05 Nov 2003:
1240 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
1241 bug only affects the XPC8245 processors
1242
wdenk384cc682005-04-03 22:35:21 +00001243* Patches by Josef Wagner, 29 Oct 2004:
1244 - Add support for MicroSys CPU87 board
1245 - Add support for MicroSys PM854 board
1246
1247* Patch by Jian Zhang, 02 Nov 2004:
1248 Add 16-bit NAND support
1249
wdenkc1a11c12005-04-03 21:11:16 +00001250* Patch by Scott McNutt, 01 Nov 2004:
1251 Add missing NIOS/NIOS2 support for "iminfo" command
1252
1253* Patch by Detlev Zundel, 29 Oct 2004:
1254 Add missing NIOS/NIOS2 support for "mkimage" tool.
1255
wdenk63153492005-04-03 20:55:38 +00001256* Patch by David Adair, 27 Oct 2004:
1257 Add missing 440GX SDRAM Controller reset
1258
wdenk3ec924a2005-04-03 17:23:39 +00001259* Patch by Steven Scholz, 25 Oct 2004:
1260 Declare reset_cpu() in include/common.h instead locally
1261
wdenk756f5862005-04-03 15:51:42 +00001262* Patch by Yusdi Santoso, 22 Oct 2004:
1263 - Add support for HIDDEN_DRAGON board
1264 - fix endianess problem in driver/rtl1839.c
1265
1266* Patch by Allen Curtis, 21 Oct 2004:
1267 support multiple serial ports
1268
wdenkb1bf6f22005-04-03 14:52:59 +00001269* Patch by Richard Klingler, 03 Apr 2005:
1270 Add call to eth_halt() in net/net.c when called functions fail
1271 after eth_init() has been called.
1272
1273* Patch by Sam Song, 3 April 2005:
1274 - Update README.Netconsole
1275 - Update README
1276
wdenk400558b2005-04-02 23:52:25 +00001277* Prepare for SoC rework of ARM code:
1278 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
1279 - rename memsetup into lowlevel_init (function name and source files)
wdenk86c98882005-04-03 14:26:46 +00001280 Patch by Steven Scholz, 03 Apr 2005:
1281 - create SoC specific directories include/asm-arm/arch-imx and
1282 include/asm-arm/arch-s3c24x0
wdenk400558b2005-04-02 23:52:25 +00001283
wdenk414eec32005-04-02 22:37:54 +00001284* Fix problems with SNTP support;
1285 enable SNTP support in some boards.
1286
wdenkbe6b6e42005-04-01 15:18:44 +00001287* Patches by Martin Krause, 01 Apr 2005:
1288 - Fix flash erase timeout on CMC_PU2
1289 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenke6ba3c92005-04-01 09:29:14 +00001290
wdenkf50cc092005-04-01 09:14:58 +00001291* Patch by Steven Scholz, 13 March 2005:
1292 fix cache enabling for AT91RM9200
1293
wdenkea287de2005-04-01 00:25:43 +00001294* Patch by Masami Komiya, 30 Mar 2005:
1295 add SNTP support and expand time server and time offset fields of
1296 DHCP support. See doc/README.SNTP
1297
1298* Patch by Steven Scholz, 13 Dec 2004:
1299 Fix bug in at91rm920 ethernet driver
1300
wdenkef2807c2005-03-31 23:44:33 +00001301* Patch by Steven Scholz, 13 Dec 2004:
1302 Remove duplicated code by merging memsetup.S files for
1303 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
1304
wdenk83e40ba2005-03-31 18:42:15 +00001305* Patch by Detlev Zundel, 31 Mar 2005:
1306 Cleanup duplicate definition of overwrite_console()
1307
1308* Update TQM5200 configuration;
1309 prepare for Rev. 200 starter kit boards
1310
wdenk0c1c117c2005-03-30 23:28:18 +00001311* Patch by Scott McNutt, 21 Oct 2004:
1312 Add support for Nios-II EPCS Controller core.
1313
1314* Patch by Scott McNutt, 20 Oct 2004:
1315 Nios-II cleanups:
1316 - Add sysid command (Nios-II only).
1317 - Locate default exception trampoline at proper offset.
1318 - Implement I/O routines (readb, writeb, etc)
1319 - Implement do_bootm_linux
1320
wdenk8f0b7cb2005-03-27 23:41:39 +00001321* Patches by Martin Krause, 22 Mar 2005:
1322 - use TQM5200_auto as MAKEALL target for TQM5200 systems
1323 - add support for SM501 graphics controller
1324 - add support for graphic console on TQM5200
1325 - add support for TQM5200 Rev 200
1326 - cleanup, fix typo in include/configs/TQM5200.h
1327
wdenk256d31c2005-03-20 22:33:46 +00001328* Patch by Manfred Baral, 17 Mar 2005:
1329 Fix typo
1330
wdenke6325152005-03-17 16:43:10 +00001331* Fix RTC configuration for PPChameleon board
1332
1333* Cleanup, fix typo in include/configs/TQM5200.h
1334
stroeseacdcd102005-03-16 20:58:31 +00001335* Patch by Stefan Roese, 16 Mar 2005:
1336 Update for esd auto_update and hh405 board
1337
wdenk89c02e22005-03-16 16:32:26 +00001338* Adapt for U-Boot image size (new features enabled) on TQM5200
1339
wdenk6c9e7892005-03-15 22:56:53 +00001340* Update code for TQM8540 board (and 85xx in general):
1341 - Change the name of the Ethernet driver: MOTO ENET -> ENET
1342 - Reformat boot messages
1343 - Enable redundant environment
1344 - Replace the -O2 optimization flag with -mno-string
1345
wdenk9d46ea42005-03-14 23:56:42 +00001346* Patch by David Brownell, 10 Mar 2005:
1347 Restore copyright statements in OHCI drivers.
1348
1349* Add support for TQM8540 board
1350
wdenkc3fafec2005-03-14 23:01:03 +00001351* Patch by Detlev Zundel, 14 Mar 2005:
1352 NC650: changed NAND flash addressing to using UPMB
1353
1354* Patch by Stefan Roese, 14 Mar 2005:
stroesee9684a52005-03-14 12:56:21 +00001355 Update for esd voh405 fpga image
1356
wdenka0bdf492005-03-14 13:14:58 +00001357* INKA4x0: Allow initialization of LCD backlight dimming from
1358 "brightness" environment variable.
1359
wdenkf4733a02005-03-06 01:21:30 +00001360* Add port initialization for digital I/O on INKA4x0
1361
wdenkc3fafec2005-03-14 23:01:03 +00001362* Patch by Stefan Roese, 01 Mar 2005:
stroese47b1e3d2005-03-01 17:26:39 +00001363 Update for esd boards dp405 and hub405
1364
wdenkb05dcb52005-03-04 11:27:31 +00001365* Fix get_partition_info() parameter error in all other calls
1366 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
1367
1368* Enable USB and IDE support for INKA4x0 board
1369
wdenkc3fafec2005-03-14 23:01:03 +00001370* Patch by Andrew Dyer, 28 Feb 2005:
wdenkb05dcb52005-03-04 11:27:31 +00001371 fix ext2load passing an incorrect pointer to get_partition_info()
1372 resulting in load failure for devices other than 0
1373
wdenke58cf2a2005-02-27 23:46:58 +00001374* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
1375
wdenk1968e612005-02-24 23:23:29 +00001376* Cleanup USB and partition defines
1377
wdenk151ab832005-02-24 22:44:16 +00001378* Add support for ext2 filesystems and image timestamps to TQM5200 board
1379
1380* Add reset code for Coral-P on INKA4x0 board
1381
1382* Patch by Martin Krause, 28 Jun 2004:
1383 Update for TRAB board.
1384
1385* Fix some missing "volatile"s in MPC5xxx FEC driver
1386
wdenke799d372005-02-07 19:44:17 +00001387* Fix cirrus voltage detection (for CPC45)
1388
wdenkf8883cb2005-02-04 15:38:08 +00001389* Fix byteorder problem in usbboot and scsiboot commands.
1390
wdenk20a80412005-02-04 15:02:06 +00001391* Patch by Cajus Hahn, 04 Feb 2005:
1392 - don't insist on leading '/' for filename in ext2load
1393 - set default partition to useful value (1) in ext2load
1394
1395* Patch by Andrew Dyer, 08 Jan 2005:
1396 fix wrong return codes in ext2 code
1397
wdenk1a344f22005-02-03 23:00:49 +00001398* Removed '--no-warn-mismatch' option from Makefile. This option
1399 makes 'ld' to overlook binary objects compatibility.
1400
1401* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1402 --end-group) outside of the group. This will make 'ld' to do
1403 _multiple_ search in the library group when resolving symbol
1404 references and do only a _single_ seach in libgcc.a after the group
1405 search.
1406
1407* Fix stability problems on CPC45 board again.
1408
1409* Make image detection for diskboot / usbboot / scsiboot more robust
1410 (also check header checksum)
1411
wdenk436be292005-01-31 22:09:11 +00001412* Update CPC45 board configuration.
1413
1414* Add USB and PCI support for INKA4x0 board
1415
wdenkcd172b72005-01-22 18:26:04 +00001416* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1417
wdenkc3d2b4b2005-01-22 18:13:04 +00001418* Code cleanup
1419
wdenk5a95f6f2005-01-12 00:38:03 +00001420* Patch by Robin Getz, 13 Oct 2004:
1421 Add standalone application to change SMC91C111 MAC addresses,
1422 see examples/README.smc91111_eeprom
1423
1424* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1425 Fix Flash support for ARM Integrator CP.
1426
wdenk289f9322005-01-12 00:15:14 +00001427* Patch by Richard Woodruff, 10 Jan 2005:
1428 Update support for OMAP2420 (ARM11) and H4 board:
1429 o clean up and add new types to H4 memory probe code.
1430 o fix to work with internal boot.
1431 o added PRCM config III operation.
1432 o fix marginal flash timings.
1433 o add revison ATAG usage.
1434 o enable voltage scaling at power chip.
1435 o fix compile error for i2c.
1436
1437* Fix network problem (error when receiving multiple ARP packets)
1438
1439* Patch by Daniel Poirot, 12 Oct 2004:
wdenk652a10c2005-01-09 23:48:14 +00001440 Add support for Wind River sbc405 board
1441
1442* Patch by Rainer Brestan, 12 Oct 2004:
1443 Make examples/Makefile more robust
1444
wdenk6225c5d2005-01-09 23:33:49 +00001445* Patch by Sam Song, 11 October 2004:
1446 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1447 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1448 less than 50MHz
1449
1450* Patch by Sam Song, 10 Oct 2004:
1451 Fix a parameter error in run_command() in main.c
1452
1453* Patch by Richard Woodruff, 01 Oct 2004:
wdenk8ed96042005-01-09 23:16:25 +00001454 add support for the TI OMAP2420 processor and its H4 reference
1455 board
1456
1457* Patch by Christian Pellegrin, 24 Sep 2004:
1458 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1459
wdenkff36fd82005-01-09 22:28:56 +00001460* Patch by Leif Lindholm, 23 Sep 2004:
1461 add support for the AMD db1550 board
1462
1463* Patch by Travis Sawyer, 15 Sep 2004:
1464 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1465 update README.serial_multi
1466
wdenk6310eb92005-01-09 21:28:15 +00001467* Patches by David Snowdon, 07 Sep 2004:
1468 - add u-boot.hex target in the top level Makefile
1469 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1470 - use -mtune=xscale and -march=armv5 options for PXA
1471
wdenka562e1b2005-01-09 18:21:42 +00001472* Patch by Florian Schlote, 08 Sep 2004:
1473 Add support for SenTec-COBRA5272-board (Coldfire).
1474
wdenk30ce5ab2005-01-09 18:12:51 +00001475* Patch by Gleb Natapov, 07 Sep 2004:
1476 mpc824x: set PCI latency timer to a sane value
1477 (is 0 after reset).
1478
1479* Patch by Kurt Stremerch, 03 Sep 2004:
1480 Add bitstream configuration option for fpga command (Xilinx only).
1481
wdenk9dd611b2005-01-09 17:19:34 +00001482* Patch by Kurt Stremerch, 03 Sep 2004:
1483 Add Xilinx Spartan2E family FPGA support
1484
1485* Patch by Jeff Angielski, 02 Sep 2004:
1486 Add Added support for H2 revision of the EP8260 board.
1487 Fixed formatting for some of the EP8260 related source files.
1488
wdenka1191902005-01-09 17:12:27 +00001489* Patch by Jon Loeliger, 02 Sep 2004:
1490 Reset monitor size back to 256 so environment can be written
1491 to flash on MPC85xx ADS and CDS releases.
1492
1493* Patch by Paolo Broggini, 02 Sep 2004:
1494 Make BSS clearing on ARM systems more robust
1495
1496* Patch by Yue Hu and Joe, 01 Sep 2004:
1497 - add PCI support for ixp425;
1498 - add EEPRO100 suppor tfor ixdp425 board.
1499
1500* Fix problem with protected sector detection in driver/cfi_flash.c
1501
1502======================================================================
wdenk15c7a8e2005-01-02 17:02:54 +00001503Changes for U-Boot 1.1.2:
wdenk2729af92004-05-03 20:45:30 +00001504======================================================================
1505
wdenke2ffd592004-12-31 09:32:47 +00001506* Code cleanup, mostly for GCC-3.3.x
1507
1508* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1509 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1510 additional ethernet addresses.
1511
1512* Cleanup drivers/i82365.c - avoid duplication of code
1513
1514* Fix bogus "cannot span across banks" flash error message
1515
1516* Code cleanup
1517
1518* Add support for CompactFlash for the CPC45 Board.
1519
wdenk08f27272004-12-19 21:39:27 +00001520* Fix problems with CMC_PU2 flash driver.
1521
wdenkec0aee72004-12-19 09:58:11 +00001522* Cleanup:
1523 - avoid trigraph warning in fs/ext2/ext2fs.c
1524 - rename UC100 -> uc100
1525
wdenkf7d15722004-12-18 22:35:43 +00001526* Add support for UC100 board
1527
stroese8cba19072004-12-16 18:47:58 +00001528* Patch by Stefan Roese, 16 Dez 2004:
1529 - ext2fs support added
1530 - Tundra universe support added
1531 - Coldfire MCF5249 support added (no preloader needed!)
1532 - MCF5249 board TASREG added
1533 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1534 VOM405, WUH405
1535 - some esd boards updated
1536 - memory commands "mdc" and "mwc" added for cyclic read/write
1537 (CONFIG_MX_CYCLIC, see README for further description)
1538
wdenk138ff602004-12-16 15:52:40 +00001539* Add support for INKA4X0 board
1540
wdenk689aec12004-12-13 00:18:44 +00001541* Patch by Steven Scholz, 12 Dec 2004:
1542 Fix typo in AT91 memory setup.
1543
wdenk7e6bf352004-12-12 22:06:17 +00001544* Patch by Martin Krause, 27 Oct 2004:
1545 - add support for "STK52xx" board (including PS/2 multiplexer)
1546 - add hardware detection for TQM5200
1547
wdenk25d67122004-12-10 11:40:40 +00001548* Clean up CMC PU2 flash driver
1549
1550* Update MAINTAINERS file
1551
1552* Fix bug in MPC823 LCD driver
1553
wdenked54e622004-11-24 23:35:19 +00001554* Fix udelay() on AT91RM9200 for delays < 1 ms.
1555
1556* Enable long help on CMC PU2 board;
1557 fix reset issue;
1558 increase CPU speed from 179 to 207 MHz.
1559
wdenkbb310d42004-11-22 22:20:07 +00001560* Fix smc91111 ethernet driver for Xaeniax board (need to handle
1561 unaligned tail part specially).
1562
wdenk9d5028c2004-11-21 00:06:33 +00001563* Update for AT91RM9200DK and CMC_PU2 boards:
1564 - Enable booting directly from flash
1565 - fix CMC_PU2 flash driver
1566
1567* Fix mkimage usage message
1568
wdenkcacfab52004-11-17 20:44:20 +00001569* Map SRAM on NC650 board
1570
wdenk1f6d4252004-11-02 13:00:33 +00001571* Work around for Ethernet problems on Xaeniax board
1572
wdenk983fda82004-10-28 00:09:35 +00001573* Patch by TsiChung Liew, 23 Sep 2004:
1574 - add support for MPC8220 CPU
1575 - Add support for Alaska and Yukon boards
1576
wdenke3c9b9f2004-10-24 23:54:40 +00001577* Fix configuration for ERIC board (needs more room)
1578
1579* Adjust MIPS compiler options at run-time depending on tools version
1580 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1581 "-mcpu=4kc" for old tools)
1582
wdenk14699a22004-10-19 22:17:51 +00001583* Add passing of the command line and memory size information to the
1584 kernel on xaeniax board.
1585
wdenk4cfaf552004-10-11 23:03:10 +00001586* Enable NAND flash support for NC650 board.
1587
1588* Patch by Thomas Lange 07 Oct 2004:
1589 Updated README for DBAu1x00 boards to match current status
1590
wdenkd407bf52004-10-11 22:51:13 +00001591* Patch by Philippe Robin, 28 Sept 2004:
1592 Fix Flash support for Versatile.
1593
1594* Patch by Roger Blofeld, 16 Sep 2004:
1595 Fix timeout for DHCP command retry
1596
wdenk2ee66532004-10-11 22:43:02 +00001597* Patch by Pantelis Antoniou, 14 Sep 2004:
1598 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1599
1600* Patch by Pantelis Antoniou, 14 Sep 2004:
1601 Kick watchdog when bz-decompressing
1602
wdenk9455b7f2004-10-11 22:25:49 +00001603* Fix CFG_HZ problems on AT91RM9200 systems
1604 [Remember: CFG_HZ should be 1000 on ALL systems!]
1605
wdenke1599e82004-10-10 23:27:33 +00001606* Patch by Gridish Shlomi, 30 Aug 2004:
1607 - Add support to revA version of PQ27 and PQ27E.
1608 - Reverted MPC8260ADS baudrate back to original 115200
1609
1610* Patch by Hojin, 17 Sep 2004:
1611 Fix typo in cfi_flash.c
wdenk8b74bf32004-10-11 23:10:30 +00001612
wdenke1599e82004-10-10 23:27:33 +00001613* Patch by Mark Jonas, 09 September 2004:
1614 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1615 error message
1616
1617* Patch by Mark Jonas, 31 August 2004:
1618 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1619 improves FTP performance for MPC5200 systems. Enabled for IceCube
1620 by default.
1621
wdenkc15f3122004-10-10 22:44:24 +00001622* Patch by Michael Bendzick, 30 Aug 2004:
1623 - Improve platform.S code for omap1510inn that detects whether code
1624 is running from SDRAM or not. Patch allows SDRAM to be configured
1625 if code is running out of SRAM at 0x20000000.
1626
1627* Patch by Frederick Klatt, 30 Aug 2004:
1628 Add support for the Wind River SBC8540/SBC8560 boards
1629
wdenk656658d2004-10-10 22:16:06 +00001630* Configure SX1 board to use drivers/cfi_flash.c
1631
1632* Patches by Michael Bendzick, 30 Aug 2004:
1633 - Configure omap1510inn board to use drivers/cfi_flash.c
1634 - Make drivers/cfi_flash.c protect environment and redundant
1635 environment.
1636
1637* Patch by Steven Scholz, 23 Jun 2004:
1638 - Add script (tools/img2brec.sh) to programm U-Boot into
1639 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1640
wdenk5c952cf2004-10-10 21:27:30 +00001641* Patches by Scott McNutt, 24 Aug 2004:
1642 - Add support for Altera Nios-II processors.
1643 - Add support for Psyent PCI-5441 board.
1644 - Add support for Psyent PK1C20 board.
1645
wdenk03f5c552004-10-10 21:21:55 +00001646* Patches by Jon Loeliger, 24 Aug 2004:
1647 - Add support for the MPC8541 and MPC8555 CDS boards
1648 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1649 - Convert MPC85xxADS to use common CFI flash driver
wdenkcf336782004-10-10 20:23:57 +00001650 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1651 from board_early_init_f()
1652 - Provide SW workaround for PCI initialization on 85xx CDS
wdenkcf336782004-10-10 20:23:57 +00001653
wdenk08b6aa62004-10-10 18:49:14 +00001654* Patches by George G. Davis, 24 Aug 2004:
1655 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1656 - Remove static network setup defaults from mx1ads_config
wdenk731215e2004-10-10 18:41:04 +00001657 - update ARM boards to use constants from mach-types.h
1658
wdenkb6508512004-10-10 18:03:33 +00001659* Patch by Gary Jennejohn, 04 Oct 2004:
1660 - fix I2C on at91rm9200
1661 - add support for Ricoh RS5C372A RTC
1662
wdenk2cbe5712004-10-10 17:05:18 +00001663* Patch by Gary Jennejohn, 01 Oct 2004:
1664 - add support for CMC PU2 board
1665 - add support for I2C on at91rm9200
1666
1667* Patch by Gary Jennejohn, 28 Sep 2004:
1668 fix baudrate handling on at91rm9200
1669
wdenk659883c2004-10-09 23:33:42 +00001670* Patch by Yuli Barcohen, 22 Aug 2004:
1671 - remove ZPC.1900 board-specific flash driver;
1672 switch the port to generic CFI driver;
1673 - port clean-up
1674
wdenkf325e182004-10-09 23:28:40 +00001675* Patch by Hinko Kocevar, 21 Aug 2004:
1676 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1677
wdenk8655b6f2004-10-09 23:25:58 +00001678* Clean up tools/bmp_logo.c to not add trailing white space
1679
1680* Patch by Hinko Kocevar, 21 Aug 2004:
1681 - Group common framebuffer functions in common/lcd.c
1682 - Group common framebuffer macros and #defines in include/lcd.h
1683 - Provide calc_fbsize() for video ATAG
1684
wdenk30d56fa2004-10-09 22:44:59 +00001685* Patch by Sam Song, 21 August 2004:
1686 - Fix a typo in README
1687 - Align "(RO)" output for "flinfo" after "protect on"
1688 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1689 ratio 1:1 when core frequency less than 50MHz
1690
wdenk8655b6f2004-10-09 23:25:58 +00001691* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk63cfcbb2004-10-09 22:32:26 +00001692 - fix some "use of label at end of compound statement" warnings
1693 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1694
wdenk1d9f4102004-10-09 22:21:29 +00001695* Patch by Steven Scholz, 16 Aug 2004:
1696 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1697 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1698 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1699 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1700 into cpu/arm920t/$(SOC)/
1701
wdenka5bbcc32004-09-29 22:55:14 +00001702* Patches by Sean Chang, 09 Aug 2004:
1703 - Added support for both 8 and 16 bit mode access to System ACE CF
1704 through MPU.
1705 - Fixed missing System ACE CF device during get FAT partition info
1706 in fat_register_device function.
1707 - Enabled System ACE CF support on ML300.
1708
1709* Patch by Sean Chang, 09 Aug 2004:
1710 Synch defines for saveenv and do_saveenv functions so they get
1711 compiled under the same statement.
1712
1713* Patch by Sean Chang, 09 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00001714 - Added I2C support for ML300.
1715 - Added support for ML300 to read out its environment information
1716 stored on the EEPROM.
1717 - Added support to use board specific parameters as part of
1718 U-Boot's environment information.
1719 - Updated MLD files to support configuration for new features
1720 above.
1721
wdenka5bbcc32004-09-29 22:55:14 +00001722* Patches by Travis Sawyer, 05 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00001723 - Remove incorrect bridge settings for eth group 6
1724 - Add call to setup bridge in ppc_440x_eth_initialize
1725 - Fix ppc_440x_eth_init to reset the phy only if its the
1726 first time through, otherwise, just check the phy for the
1727 autonegotiated speed/duplex. This allows the use of netconsole
1728 - only print the speed/duplex the first time the phy is reset.
1729
wdenkda93ed82004-09-29 11:02:56 +00001730* Patch by Shlomo Kut, 29 Mar 2004:
1731 Add support for MKS Instruments "Quantum" board
1732
1733* Fix build problem with Cogent boards;
1734 avoid using <asm/byteorder.h> when using the host compiler
1735
wdenka5725fa2004-09-28 21:51:42 +00001736* Patch by Ganapathi C, 04 Aug 2004:
1737 Fix NFS timeout issue
1738
wdenke1a3f6b2004-09-28 21:39:45 +00001739* Patch by Yuli Barcohen, 19 Jul 2004:
1740 - Fix host tools building in Cygwin environment
1741 - Fix header files search order for host tools
1742
1743* Patch by Tom Armistead, 19 Jul 2004:
1744 Fix kgdb.S support for 74xx_75x cpu
1745
wdenkc65fdc72004-09-28 21:26:26 +00001746* Patch by Jon Loeliger, 15 Jul 2004:
1747 Fix MPC85xx I2C driver
1748
wdenk64f70be2004-09-28 20:34:50 +00001749* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1750
wdenkcce625e2004-09-28 19:00:19 +00001751* Patch by Stephen Williams, 15 July 2004
1752 Set the PCI class code for JSE board as part of PCI interface setup
1753
1754* Patch by Michael Bendzick, 15 Jul 2004:
1755 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1756 CFG_FLASH_USE_BUFFER_WRITE is set
1757
wdenk66ca92a2004-09-28 17:59:53 +00001758* Patch by Yuli Barcohen, 13 Jul 2004:
1759 Allow clock setting on MPC866/MPC885 series chips according to
1760 environment variable `cpuclk'
1761
1762* Patch by Yuli Barcohen, 20 Apr 2004:
1763 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1764
wdenk4ec3a7f2004-09-28 16:44:41 +00001765* Patch by Vincent Dubey, 24 Sep 2004:
1766 Add support for xaeniax board
1767
wdenk79536a62004-09-27 20:20:11 +00001768* Add comment about non-GPL character of standalone applications to
1769 COPYING file
1770
1771* Fix FEC ethernet problem on NSCU board.
1772
wdenk4734cb72004-09-21 23:33:32 +00001773* Patch by Gary Jennejohn, 09 Sep 2004:
1774 allow to use USART1 as console port on at91rm9200dk boards
1775
stroesec3548392004-09-16 12:37:13 +00001776* Patch by Stefan Roese, 16 Sep 2004:
1777 Update AR405 board.
1778
wdenk1d6f9722004-09-09 17:44:35 +00001779* Fix SysClk handling for PPChameleon and CATcenter boards
1780
wdenkeedcd072004-09-08 22:03:11 +00001781* Patch by Detlev Zundel, 08 Sep 2004:
1782 Update etags build target
1783
1784* Improve NetConsole support: add support for broadcast destination
1785 address and buffered input.
1786
1787* Cleanup compiler warnings for GCC 3.3.x and later
1788
1789* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1790
wdenk7ca202f2004-08-28 22:45:57 +00001791* Add support for IDS "NC650" board
1792
wdenk31a64922004-08-28 21:09:14 +00001793* Add automatic update support for LWMON board
1794
1795* Clear Block Lock-Bits when erasing flash on LWMON board.
1796
1797* Fix return code of "fatload" command
1798
1799* Enable MSDOS/VFAT filesystem support for LWMON board
1800
wdenk89394042004-08-04 21:56:49 +00001801* Patch by Martin Krause, 03 Aug 2004:
1802 change timing for SM501 graphics controller on TQM5200 module
1803
1804* Patch by Mark Jonas, 13 July 2004:
1805 - Total5200 LCD now run in little endian mode. Endianess conversion
1806 is done in hardware.
wdenk7ca202f2004-08-28 22:45:57 +00001807 - Removed last reference to "console" environment variable.
wdenk89394042004-08-04 21:56:49 +00001808
wdenk429168e2004-08-02 23:39:03 +00001809* Patches by Lars Munch, 12 Jul 2004:
1810 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1811 board specific
1812 - split out the LXT971A PHY from ns_9750_eth.h
1813 - split the dm9161 phy part out of at91rm9200_ether.c
1814
wdenk6705d812004-08-02 23:22:59 +00001815* Patch by Andreas Engel, 12 Jul 2004:
1816 Replaced hardcoded PL011 clock frequency with config variable.
1817 Fixed wrong CONFIG_CMD_DFL doc.
1818
1819* Patch by Thomas Viehweger, 09 Jun 2004:
1820 make it possible to remove chpart when there is only one partition
1821
wdenk68ceb292004-08-02 21:11:11 +00001822* Add support for console over UDP (compatible to Ingo Molnar's
1823 netconsole patch under Linux)
1824
wdenk9aea9532004-08-01 23:02:45 +00001825* Patch by Jon Loeliger, 16 Jul 2004:
1826 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1827 STXGP3 boards
1828 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1829 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1830 and CONFIG_L2_INIT_RAM options.
1831 - Refactor Local Bus initialization out of SDRAM setup.
1832 - Re-implement new version of LBC11/DDR11 errata workarounds.
1833 - Moved board specific PCI init parts out of CPU directory.
1834 - Added TLB entry for PCI-1 IO Memory
1835 - Updated README.mpc85xxads
1836
wdenk281e00a2004-08-01 22:48:16 +00001837* Patch by Sascha Hauer, 28 Jun:
1838 - add generic support for Motorola i.MX architecture
1839 - add support for mx1ads, mx1fs2 and scb9328 boards
1840
1841* Patches by Marc Leeman, 23 Jul 2004:
1842 - Add define for the PCI/Memory Buffer Configuration Register
1843 - corrected comments in cpu/mpc824x/cpu_init.c
1844
1845* Add support for multiple serial interfaces
1846 (for example to allow modem dial-in / dial-out)
1847
stroese45eeb892004-07-15 14:41:43 +00001848* Patch by Stefan Roese, 15 Jul 2004:
1849 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1850
wdenkcfca5e62004-08-01 13:09:47 +00001851* Fix NSCU config; add ethernet wakeup code.
1852
wdenk281e00a2004-08-01 22:48:16 +00001853* Add link for preloader for Motorola Coldfire to README.m68k
wdenkcfca5e62004-08-01 13:09:47 +00001854
wdenk75b1fa72004-07-12 22:34:51 +00001855* Patch by Michael Bendzick, 12 Jul 2004:
1856 fix output formatting in drivers/cfi_flash.c
1857
wdenk07cba352004-07-12 14:37:59 +00001858* Patch by Mark Jonas, 02 Jul 2004:
1859 Fix lowboot (again) on MPC5xxx
1860
wdenkcdc7fea2004-07-11 22:27:55 +00001861* Patch by Curt Brune, 07 Jul 2004:
1862 relocate exception vectors on arm720t if needed
1863
wdenka1f4a3d2004-07-11 22:19:26 +00001864* Patch by George G. Davis, 06 Jul 2004:
1865 - update mach-types.h to latest arm.linux.org.uk master list
1866 - Set correct OMAP1610 bi_arch_number for build target
1867
1868* Patch by Curt Brune, 06 Jul 2004:
1869 evb4510: add support for timer interrupt; cleanup
1870
wdenkb9283e22004-07-11 21:49:42 +00001871* Patch by Dan Poirot, 06 Jul 2004:
1872 Fix sbc8260 environment variables
1873
1874* Cleanup redundand "console" environment variable
1875
wdenk81050922004-07-11 20:04:51 +00001876* Patch by Mark Jonas, 05 Jul 2004:
1877 add support for the Total5100's and Total5200's LCD screen
1878
1879* Patches by Dan Eisenhut, 01 Jul 2004:
1880 - README fixes.
1881 - Move doc2000.h include to prevent compiler warning on some boards
1882
wdenk6c7a1402004-07-11 19:17:20 +00001883* Patch by Mark Jonas, 01 Jul 2004:
1884 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1885 MGT5100 and MPC5200 based Freescale platforms.
1886
wdenkbc54f302004-07-11 18:10:30 +00001887* Patch by Philippe Robin, 01 Jul 2004:
1888 Add initialization for Integrator and versatile board files.
1889
1890* Patch by Hinko Kocevar, 01 Jun 2004:
1891 Fix VFD FB allocation, add LCD FB allocation on ARM
1892
wdenk56523f12004-07-11 17:40:54 +00001893* Patch by Martin Krause, 30 Jun 2004:
1894 Add support for TQM5200 board
1895
1896* Patch by Martin Krause, 29 Jun 2004:
1897 Add loopw command: infinite write loop on address range
1898
wdenk857cad32004-07-10 23:48:41 +00001899* Patches by Yasushi Shoji, 29 Jun 2004:
1900 - add empty include/asm-microblaze/processor.h
1901 - add to CREDITS and MAINTAINERS
1902 - add gd initialization
1903 - add MicroBlaze and SUZAKU board to MAKEALL script
1904 - add reset support for SUZAKU
1905 - add flush_cache() for MicroBlaze
1906 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1907 size flash memory on SUZAKU
1908
wdenkfabd46a2004-07-10 23:11:10 +00001909* Patch by Prakash Kumar, 27 Jun 2004:
1910 Add support for the PXA250 based Intrinsyc Cerf board.
1911
1912* Patch by Yasushi Shoji, 27 Jun 2004:
1913 fix comment in include/common.h
1914
wdenk466b7412004-07-10 22:35:59 +00001915* Rename SBC8560 into sbc8560 for consistency
1916
1917* Patch by Daniel Poirot, 24 Jun 2004:
1918 Add support for Wind River's sbc8240 board
1919
1920* Patches by Yasushi Shoji, 26 Jun 2004:
1921 - drivers/serial_xuartlite.c: fix "return 0" in void function
1922 - add microblaze support to mkimage tool
1923
wdenk8b07a112004-07-10 21:45:47 +00001924* Patch by Fred Klatt, 25 Jun 2004:
wdenk466b7412004-07-10 22:35:59 +00001925 Add support for WindRiver's sbc8560 board
wdenk8b07a112004-07-10 21:45:47 +00001926
1927* Patch by Nicolas Lacressonniere, 24 Jun 2004
1928 Small Bugs fixes for "at91rm9200dk" board:
1929 - Timing modifications for SPI DataFlash access
1930 - Fix NAND flash detection bug
1931
1932* Patch by Nicolas Lacressonniere, 24 Jun 2004:
1933 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1934
wdenk0ac6f8b2004-07-09 23:27:13 +00001935* Patch by Jon Loeliger, 17 June 2004:
1936 Completion of the 8540ADS/8560ADS updates:
1937 Fix some PCI and Rapid I/O memory maps,
1938 Initialize both TSEC 1 and 2,
1939 Initialize SDRAM
1940 Update MAINTAINER for 85xx boards and README.mpc85xxads
1941
wdenk26238132004-07-09 22:51:01 +00001942* Patch by Yuli Barcohen, 16 Jun 2004:
1943 Remove obsolete AdderII port which was superseded by unified
1944 AdderII/Adder87x port
1945
1946* Patch by Ladislav Michl, 16 Jun 2004:
1947 Fix gcc-3.3.3 warnings for smc91111.c
1948
stroeseede13022004-07-02 14:38:26 +00001949* Patch by Stefan Roese, 02 Jul 2004:
1950 - Fix bug in 405 ethernet driver; allocated data not cleared!
1951 - Fix problem in 405 i2c driver; don't try to print without console!
1952
wdenk78953f22004-07-01 22:02:29 +00001953* Patch by Paul Ruhland, 11 Jun 2004:
1954 Remove debug code from 'board/lpd7a40x/flash.c'
1955
wdenke55ca7e2004-07-01 21:40:08 +00001956* Patch by Andrea Marson, 11 Jun 2004:
1957 Update for PPChameleon board:
1958 - support for SysClk @ 25MHz
1959 - support for Silicon Motion SM712 VGA controller
1960 - some clean ups
1961
wdenk93f6a672004-07-01 20:28:03 +00001962* Patches by Richard Woodruff, 10 Jun 2004:
1963 - fix problems with examples/stubs.c for GCC >= 3.4
1964 - fix problems with gd initialization
1965
wdenk39539882004-07-01 16:30:44 +00001966* Patch by Curt Brune, 17 May 2004:
1967 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1968 - Add support for ESPD-Inc. EVB4510 Board
1969
1970* Patch by Marc Leeman, 11 May 2004:
1971 Fix for MPC8245 - reading PPC Memory from another device with the
1972 PPC as PCI target device corrupts data due to interenal hardware
1973 buffering.
1974
wdenke94d2cd2004-06-30 22:59:18 +00001975* Fix "cls" command when used with splash screen
1976
1977* Increase NFS download timeout (now 1 min - 10 sec is to short for a
1978 slow download of a big image)
1979
wdenkc3f4d172004-06-25 23:35:58 +00001980* Add "cls" function to MPC823 LCD driver so we can reinitialize the
1981 display even after showing a bitmap
1982
wdenk49822e22004-06-19 21:19:10 +00001983* Patch by Josef Wagner, 04 Jun 2004:
1984 - DDR Ram support for PM520 (MPC5200)
1985 - support for different flash types (PM520)
1986 - USB / IDE / CF-Card / DiskOnChip support for PM520
1987 - 8 bit boot rom support for PM520/CE520
1988 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1989 - I2C and RTC support for CPC45
1990 - support of new flash type (28F160C3T) for CPC45
1991
wdenk46a414d2004-06-17 18:50:45 +00001992* Fix flash parameters passed to Linux for PPChameleon board
1993
1994* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
1995
wdenkf832d8a2004-06-10 21:55:33 +00001996* Patch by Paul Ruhland, 10 Jun 2004:
wdenk49822e22004-06-19 21:19:10 +00001997 fix support for Logic SDK-LH7A404 board and clean up the
wdenkf832d8a2004-06-10 21:55:33 +00001998 LH7A404 register macros.
1999
2000* Patch by Matthew McClintock, 10 Jun 2004:
2001 Modify code to select correct serial clock on Sandpoint8245
2002
wdenkb54d32b2004-06-10 21:34:36 +00002003* Patch by Robert Schwebel, 10 Jun 2004:
2004 Add support for Intel K3 strata flash.
2005
2006* Patch by Thomas Brand, 10 Jun 2004:
2007 Fix "loads" command on DK1S10 board
2008
wdenk2d24a3a2004-06-09 21:50:45 +00002009* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk99edcfb2004-06-09 21:54:22 +00002010 Add support for 8MB flash SIMM and JFFS2 file system on
2011 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
2012
2013* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk2d24a3a2004-06-09 21:50:45 +00002014 Add support for Analogue&Micro Adder87x and the older AdderII board.
2015
2016* Patch by Ming-Len Wu, 09 Jun 2004:
2017 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
2018
wdenke63c8ee2004-06-09 21:04:48 +00002019* Patch by Sam Song, 09 Jun 2004:
2020 - Add support for RPXlite_DW board
2021 - Update FLASH driver for 4*AM29DL323DB90VI
2022 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
2023
wdenk36c72872004-06-09 17:45:32 +00002024* Patch by Mark Jonas, 08 June 2004:
2025 - Make MPC5200 boards evaluate the SVR to print processor name and
2026 version in checkcpu() (cpu/mpc5xxx/cpu.c).
2027
2028* Patch by Kai-Uwe Bloem, 06 May 2004:
2029 Fix endianess problem in cramfs code
2030
wdenk4c0d4c32004-06-09 17:34:58 +00002031* Patch by Tom Armistead, 04 Jun 2004:
2032 Add support for MAX6900 RTC
2033
2034* Patches by Ladislav Michl, 03 Jun 2004:
2035 - fix cfi_flash.c on LE systems
2036 - let 'make mrproper' delete u-boot.img as well
2037 - turn printf into debug in cfi_flash.c
2038
wdenkca0e7742004-06-09 15:37:23 +00002039* Patch by Kurt Stremerch, 28 May 2004:
2040 Add support for Exys XSEngine board
2041
wdenk697037f2004-06-09 15:29:49 +00002042* Patch by Martin Krause, 27 May 2004:
2043 Fix a MPC5xxx I2C timing issue in i2c_probe().
2044
2045* Patch by Leif Lindholm, 27 May 2004:
2046 Fix board_init_f() for dbau1x00 board.
2047
wdenk3ff02c22004-06-09 15:25:53 +00002048* Patch by Imre Deak, 26 May 2004:
2049 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
2050 Set flash base accordingly, and decide whether to do or skip board
2051 specific setup steps.
2052
2053* Patch by Josef Baumgartner, 26 May 2004:
2054 Add missing define in include/asm-m68k/global_data.h
2055
wdenk70f05ac2004-06-09 15:24:18 +00002056* Patch by Josef Baumgartner, 25 May 2004:
2057 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
2058
2059* Patch by Paul Ruhland, 24 May 2004:
2060 fix SDRAM initialization for LPD7A400 board.
2061
wdenk13a56952004-06-09 14:58:14 +00002062* Patch by Jian Zhang, 20 May 2004:
2063 add support for environment in NAND flash
2064
wdenkc3c7f862004-06-09 14:47:54 +00002065* Patch by Yuli Barcohen, 20 May 2004:
2066 Add support for Interphase iSPAN boards.
2067
2068* Patches by Paul Ruhland, 17 May 2004:
2069 - Add I/O functions to the smc91111 ethernet driver to support the
2070 Logic LPD7A40x boards.
wdenkf39748a2004-06-09 13:37:52 +00002071 - Add support for the Logic Zoom LH7A40x based SDK board(s),
2072 specifically the LPD7A400.
2073
2074* Patches by Robert Schwebel, 15 May 2004:
2075 - call MAC address reading code also for SMSC91C111;
2076 - make SMSC91C111 timeout configurable, remove duplicate code
2077 - fix get_timer() for PXA
2078 - update doc/README.JFFS2
2079 - use "bootfile" env variable also for jffs2
2080
wdenkaa245092004-06-09 12:47:02 +00002081* Patch by Tolunay Orkun, 14 May 2004:
2082 Add support for Cogent CSB472 board (8MB Flash Rev)
2083
wdenkaa5590b2004-06-09 12:42:26 +00002084* Patch by Thomas Viehweger, 14 May 2004:
2085 - flash.h: more flash types added
2086 - immap_8260.h: some bits added (useful for RMII)
2087 - cmd_coninfo.c: typo corrected, printf -> puts
2088 - reduced size by replacing spaces with tab
2089
wdenk48abe7b2004-06-09 10:15:00 +00002090* Patch by Robert Schwebel, 13 May 2004:
2091 Add 'imgextract' command: extract one part of a multi file image.
2092
wdenk547b4cb2004-06-09 00:51:50 +00002093* Patches by Jon Loeliger, 11 May 2004:
wdenk97d80fc2004-06-09 00:34:46 +00002094 Dynamically handle REV1 and REV2 MPC85xx parts.
2095 (Jon Loeliger, 10-May-2004).
2096 New consistent memory map and Local Access Window across MPC85xx line.
2097 New CCSRBAR at 0xE000_0000 now.
2098 Add RAPID I/O memory map.
2099 New memory map in README.MPC85xxads
2100 (Kumar Gala, 10-May-2004)
2101 Better board and CPU identification on MPC85xx boards at boot.
2102 (Jon Loeliger, 10-May-2004)
2103 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
2104 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
2105 (Jim Robertson, 10-May-2004)
2106 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
2107 Supports multiple PHYs.
2108 (Andy Fleming, 10-May-2004)
2109 Some README.MPC85xxads updates.
2110 (Kumar Gala, 10-May-2004)
2111 Copyright updates for "Freescale"
2112 (Andy Fleming, 10-May-2004)
2113
wdenk6bdd1372004-06-09 00:15:33 +00002114* Patch by Stephen Williams, 11 May 2004:
2115 Add flash support for ST M29W040B
2116 Reduce JSE specific flash.c to remove dead code.
2117
wdenk356a0d92004-06-09 00:10:59 +00002118* Patch by Markus Pietrek, 04 May 2004:
2119 Fix clear_bss code for ARM systems (all except s3c44b0 which
2120 doesn't clear BSS at all?)
2121
2122* Fix "ping" problem on INC-IP board. Strange problem:
2123 Sometimes the store word instruction hangs while writing to one of
2124 the Switch registers, but only if the next instruction is 16-byte
2125 aligned. Moving the instruction into a separate function somehow
2126 makes the problem go away.
2127
wdenk1eaeb582004-06-08 00:22:43 +00002128* Patch by Rishi Bhattacharya, 08 May 2004:
2129 Add support for TI OMAP5912 OSK Board
2130
2131* Patch by Sam Song May, 07 May 2004:
2132 Fix typo of UPM table for rmu board
2133
2134* Patch by Pantelis Antoniou, 05 May 2004:
wdenk79fa88f2004-06-07 23:46:25 +00002135 - Intracom board update.
2136 - Add Codec POST.
2137
wdenkcea655a2004-06-06 23:53:59 +00002138* Add support for the second Ethernet interface for the 'PPChameleon'
2139 board.
2140
wdenka56bd922004-06-06 23:13:55 +00002141* Patch by Dave Peverley, 30 Apr 2004:
2142 Add support for OMAP730 Perseus2 Development board
2143
2144* Patch by Alan J. Luse, 29 Apr 2004:
2145 Fix flash chip-select (OR0) option register setting on FADS boards.
2146
2147* Patch by Alan J. Luse, 29 Apr 2004:
2148 Report MII network speed and duplex setting properly when
2149 auto-negotiate is not enabled.
2150
2151* Patch by Jarrett Redd, 29 Apr 2004:
2152 Fix hang on reset on Ocotea board due to flash in wrong mode.
2153
wdenk5ca26792004-06-06 22:11:41 +00002154* Patch by Dave Peverley, 29 Apr 2004:
2155 add MAC address detection to smc91111 driver
2156
2157* Patch by David Müller, 28 Apr 2004:
2158 fix typo in lib_arm/board.c
2159
wdenk17ea1172004-06-06 21:51:03 +00002160* Patch by Tolunay Orkun, 20 Apr 2004:
2161 - README update: add CONFIG_CSB272 and csb272_config
2162 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
2163 i2cfast environment variable
2164
wdenk11142572004-06-06 21:35:06 +00002165* Patch by Yuli Barcohen, 19 Apr 2004:
2166 - Rename DUET_ADS to MPC885ADS
2167 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
2168 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
2169 - Clean up FADS family port to use the new defines
2170
wdenk979bdbc2004-06-01 21:08:17 +00002171* Fix PCI support on CPC45 board
2172
wdenke4cc71a2004-05-19 21:33:14 +00002173* Patch by Scott McNutt, 25 Apr 2004:
2174 Add Nios GDB/JTAG Console support:
2175 - Add stubs to support gdb via JTAG.
2176 - Add support for console over JTAG.
2177 - Minor cleanup.
2178
wdenk10767cc2004-05-13 13:23:58 +00002179* Add support for CATcenter board (based on PPChameleon ME module)
2180
wdenk02b11f82004-05-12 22:54:36 +00002181* Patch by Klaus Heydeck, 12 May 2004:
2182 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
2183 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
2184 various changes to KUP4 board specific files
2185
wdenk6c1362c2004-05-12 22:18:31 +00002186* Fix minor network problem on MPC5200: need some delay between
2187 resetting the PHY and sending the first packet. Implemented in a
2188 "natural" way by invoking the PHY reset and initialization code
2189 only once after power on vs. each time the interface is brought up.
2190
wdenk9d9e2832004-05-11 21:53:55 +00002191* Add some limited support for low-speed devices to SL811 USB controller
2192 (at least "usb reset" now passes successfully and "usb info" displays
2193 correct information)
2194
wdenkbaac6072004-05-08 20:33:20 +00002195* Change init sequence for multiple network interfaces: initialize
2196 on-chip interfaces before external cards.
2197
wdenk32877d62004-05-05 19:44:41 +00002198* Fix memory leak in the NAND-specific JFFS2 code
2199
2200* Fix SL811 USB controller when attached to a USB hub
2201
wdenk62b4ac92004-05-05 08:31:53 +00002202* Fix config option spelling in PM520 config file
2203
2204* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
2205 patches by Pantelis Antoniou, 30 Mar 2004)
2206
wdenk2729af92004-05-03 20:45:30 +00002207* Fix minor NAND JFFS2 related issue
2208
2209* Fixes for SL811 USB controller:
2210 - implement workaround for broken memory stick
2211 - improve error handling
2212
2213* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
2214 cope with congested networks.
2215
2216======================================================================
wdenk56b86bf2004-04-12 14:31:43 +00002217Changes for U-Boot 1.1.1:
2218======================================================================
wdenk507bbe32004-04-18 21:13:41 +00002219
wdenkfc1cfcd2004-04-25 15:41:35 +00002220* Patch by Travis Sawyer, 23 Apr 2004:
2221 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
2222 errata from Vitesse Semiconductor.
wdenk0b8fa032004-04-25 14:37:29 +00002223
2224* Patch by Philippe Robin, 22 Apr 2004:
wdenk02b11f82004-05-12 22:54:36 +00002225 Fix ethernet configuration for "versatile" board
wdenk0b8fa032004-04-25 14:37:29 +00002226
2227* Patch by Kshitij Gupta, 21 Apr 2004:
2228 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
2229
2230* Patch by Steven Scholz, 24 Feb 2004:
2231 Fix a bug in AT91RM9200 ethernet driver:
2232 The MII interface is now initialized before accessing the PHY.
2233
wdenkb9711de2004-04-25 13:18:40 +00002234* Patch by John Kerl, 19 Apr 2004:
2235 Use U-boot's miiphy.h for PHY register names, rather than
2236 introducing a new header file.
2237
2238* Update pci_ids.h from linux-2.4.26
2239
2240* Patch by Masami Komiya, 19 Apr 2004:
2241 Fix problem cause by VLAN function on little endian architecture
2242 without VLAN environment
2243
wdenke9132ea2004-04-24 23:23:30 +00002244* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenkb9711de2004-04-25 13:18:40 +00002245 binary image for all clock frequencies. Implement run-time
wdenke9132ea2004-04-24 23:23:30 +00002246 optimization of flash access timing based on the actual bus
2247 frequency.
2248
wdenk5cf91d62004-04-23 20:32:05 +00002249* Modify KUP4X board configuration to use SL811 driver for USB memory
2250 sticks (including FAT / VFAT filesystem support)
2251
2252* Add SL811 Host Controller Interface driver for USB
2253
2254* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
2255
2256* Patch by Pantelis Antoniou, 19 Apr 2004:
2257 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
2258 Minor patches for Intracom boards.
2259
2260* Patch by Christian Pell, 19 Apr 2004:
2261 cleanup support for CF/IDE on PCMCIA for PXA25X
2262
wdenke35745b2004-04-18 23:32:11 +00002263* Temporarily disabled John Kerl's extended MII command code because
2264 "miivals.h" is missing
2265
2266* Patches by Mark Jonas, 13 Apr 2004:
2267 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
2268 - Add sync instructions to IceCube SDRAM init code
2269 - Move SDRAM chip constants into seperate include files
2270 - Unify DDR and SDR initialization code
2271 - Unify all IceCube (Lite5xxx) target names
2272
wdenk24711112004-04-18 22:57:51 +00002273* Patch by John Kerl, 16 Apr 2004:
2274 Enable ranges in mii command, e.g. mii read 0-1f 0 or
2275 mii read 4-7 18-1a. Also add mii dump subcommand for
2276 pretty-printing standard regs 0-5.
2277
2278* Patch by Stephen Williams, 16 April 2004:
2279 fix typo in JSE.h; update MAINTAINERS
2280
wdenk498b8db2004-04-18 22:26:17 +00002281* Patch by Matthew S. McClintock, 14 Apr 2004:
2282 fix initdram function for utx8245 board
2283
2284* Patch by Markus Pietrek, 14 Apr 2004:
2285 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
2286
2287* Patch by Reinhard Meyer, 18 Apr 2004:
2288 provide the IDE Reset Function for EMK 5200 boards
2289
2290* Patch by Masami Komiya, 12 Apr 2004:
2291 fix pci_hose_write_config_{byte,word}_via_dword problems
2292
wdenka8bd82d2004-04-18 22:03:42 +00002293* Patch by Sangmoon Kim, 12 Apr 2004:
2294 Update max RAM size for debris board
2295
2296* Patch by Travis Sawyer, 08 Apr 2004:
2297 Add TLB entry for second DIMM slot on ocotea
2298
2299* Patch by Masami Komiya, 08 Apr 2004:
2300 add RTL8169 network driver
2301
wdenk7abf0c52004-04-18 21:45:42 +00002302* Patch by Dan Malek, 07 Apr 2004:
2303 - Add support for RPC/STx GP3, Motorola 8560 board
2304 - Update 85xx TSEC driver so it searches MII for first available PHY
2305 and uses that one.
2306 - Add functions to support console MII commands.
2307
2308* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka8bd82d2004-04-18 22:03:42 +00002309 Move initialization of bi_iic_fast[]
wdenk7abf0c52004-04-18 21:45:42 +00002310 from board_init_f() to board_init_r()
2311
2312* Patch by Yasushi Shoji, 07 Apr 2004:
2313 Cleanup microblaze port
2314
2315* Patch by Sangmoon Kim, 07 Apr 2004:
2316 Add auto SDRAM module detection for Debris board
2317
wdenkd4326ac2004-04-18 21:17:30 +00002318* Patch by Rune Torgersen, 06 Apr 2004:
2319 - Fix some PCI problems on the MPC8266ADS board
2320 - Fix the location of some PCI entries in the immap structure
2321
wdenk507bbe32004-04-18 21:13:41 +00002322* Patch by Yasushi Shoji, 07 Apr 2004:
2323 - add support for microblaze processors
2324 - add support for AtmarkTechno "suzaku" board
2325
wdenk998eaae2004-04-18 19:43:36 +00002326* Configure PPChameleon board to use redundand environment in flash
2327
2328* Configure PPChameleon board to use JFFS2 NAND support.
2329
2330* Added support for JFFS2 filesystem (read-only) on top of NAND flash
2331
wdenk6e592382004-04-18 17:39:38 +00002332* Patch by Rune Torgersen, 16 Apr 2004:
2333 LBA48 fixes
wdenk56b86bf2004-04-12 14:31:43 +00002334
wdenkc26e4542004-04-18 10:13:26 +00002335* Patches by Pantelis Antoniou, 16 Apr 2004:
2336 - add support for a new version of an Intracom board and fix
2337 various other things on others.
2338 - add verify support to the crc32 command (define
2339 CONFIG_CRC32_VERIFY to enable it)
2340 - fix FEC driver for MPC8xx systems:
2341 1. fix compilation problems for boards that use dynamic
2342 allocation of DPRAM
2343 2. shut down FEC after network transfers
2344 - HUSH parser fixes:
2345 1. A new test command was added. This is a simplified version of
2346 the one in the bourne shell.
2347 2. A new exit command was added which terminates the current
2348 executing script.
2349 3. Fixed handing of $? (exit code of last executed command)
wdenk6e592382004-04-18 17:39:38 +00002350 - Fix some compile problems;
2351 add "once" functionality for the netretry variable
wdenkc26e4542004-04-18 10:13:26 +00002352
wdenkea66bc82004-04-15 23:23:39 +00002353* Patch by George G. Davis, 02 Apr 2004:
2354 add support for Intel Assabet board
2355
wdenkdb01a2e2004-04-15 23:14:49 +00002356* Patch by Stephen Williams, 01 Apr 2004:
2357 Add support for Picture Elements JSE board
2358
2359* Patch by Christian Pell, 01 Apr 2004:
2360 Add CompactFlash support for PXA systems.
2361
wdenk04a85b32004-04-15 18:22:41 +00002362* Patches by Pantelis Antoniou, 30 Mar 2004:
2363 - add auto-complete support to the U-Boot CLI
2364 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk5a8c51c2004-04-15 21:16:42 +00002365 - add support for the Epson 156x series of graphical displays
2366 (These displays are serial and not suitable for using a normal
2367 framebuffer console on them)
2368 - add infrastructure needed in order to POST any DSPs in a board
wdenka6ab4bf2004-04-15 21:31:56 +00002369 - improve and fix various things in the MPC8xx FEC driver:
2370 1. The new 87x and 88x series of processors have two FECs,
2371 and the new driver supports them both.
2372 2. Another change in the 87x/88x series is support for
2373 the RMII (Reduced MII) interface. However numerous
2374 changes are needed to make it work since the PHYs
2375 are connected to the same lines. That means that
2376 you have to address them correctly over the MII
2377 interface.
2378 3. We now correctly match the MII/RMII interface
2379 configuration to what the PHY reports.
wdenka3d991b2004-04-15 21:48:45 +00002380 - Fix problem when readingthe MII status register. Due to the
2381 internal design of many PHYs you have to read the register
2382 twice. The problem is more apparent in 10Mbit mode.
2383 - add new mode ".jffs2s" for reading from a NAND device: it just
2384 skips over bad blocks.
2385 - add networking support for VLANs (802.1q), and CDP (Cisco
2386 Discovery Protocol)
wdenkbda6c8a2004-04-15 21:58:11 +00002387 - some minor patches / cleanup
wdenk04a85b32004-04-15 18:22:41 +00002388
2389* Patch by Yuli Barcohen, 28 Mar 2004:
2390 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2391 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2392 - Change configuration method for MPC8260ADS family
2393
wdenkd716b122004-04-12 16:12:49 +00002394* add startup code to clear the BSS of standalone applications
2395
wdenk56b86bf2004-04-12 14:31:43 +00002396* Fix if / elif handling bug in HUSH shell
2397
2398======================================================================
wdenkf525c8a2004-04-10 20:44:51 +00002399Changes for U-Boot 1.1.0:
wdenkc83bf6a2004-01-06 22:38:14 +00002400======================================================================
2401
wdenk7e780362004-04-08 22:31:29 +00002402* Patch by Mark Jonas: Remove config.tmp files only when
2403 unconfiguring the board
2404
2405* Adapt RMU board for bigger flash memory
2406
wdenk0608e042004-03-25 19:29:38 +00002407* Patch by Klaus Heydeck, 13 Mar 2003:
2408 Add support for KUP4X Board
2409
wdenk518e2e12004-03-25 14:59:05 +00002410* Patch by Pavel Bartusek, 21 Mar 2004
2411 Add Reiserfs support
2412
2413* Patch by Hinko Kocevar, 20 Mar 2004
2414 - Add auto-release for SMSC LAN91c111 driver
2415 - Add save/restore of PTR and PNR regs as suggested in datasheet
2416
wdenk6fb6af62004-03-23 23:20:24 +00002417* Patch by Stephen Williams, 19 March 2004
2418 Increase speed of sector reads from SystemACE,
2419 shorten poll timeout and remove a useless reset
2420
2421* Patch by Tolunay Orkun, 19 Mar 2004:
2422 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2423 (CONFIG_PHY_GIGE)
2424
2425* Patch by Brad Kemp, 18 Mar 2004:
2426 prevent machine checks during a PCI scan
2427
2428* Patch by Pierre Aubert, 18 Mar 2004:
2429 Fix string cleaning in IDE identification
2430
wdenkeeb1b772004-03-23 22:53:55 +00002431* Patch by Pierre Aubert, 18 Mar 2004:
2432 - Unify video mode handling for Chips & Technologies 69000 Video
2433 chip and Silicon Motion SMI 712/710/810 Video chip
2434 - Add selection of the video output (CRT or LCD) via 'videoout'
2435 environment variable for the Silicon Motion
2436 - README update
2437
2438* Patch by Pierre Aubert, 18 Mar 2004:
2439 include/common.h typo fix
2440
2441* Patches by Tolunay Orkun, 17 Mar 2004:
2442 - Add support for bd->bi_iic_fast[] initialization via environment
2443 variable "i2cfast" (CONFIG_I2CFAST)
2444 - Add "i2cfast" u-boot environment variable support for csb272
2445
wdenk27aa8182004-03-23 22:37:33 +00002446* Patch by Carl Riechers, 17 Mar 2004:
2447 Ignore '\0' characters in console input for use with telnet and
2448 telco pads.
2449
2450* Patch by Leon Kukovec, 17 Mar 2004:
2451 typo fix for strswab prototype #ifdef
2452
wdenk4b9206e2004-03-23 22:14:11 +00002453* Patches by Thomas Viehweger, 16 Mar 2004:
2454 - show PCI clock frequency on MPC8260 systems
2455 - add FCC_PSMR_RMII flag for HiP7 processors
2456 - in do_jffs2_fsload(), take load address from load_addr if not set
2457 explicit, update load_addr otherwise
2458 - replaced printf by putc/puts when no formatting is needed
2459 (smaller code size, faster execution)
2460
wdenk109c0e32004-03-23 21:43:07 +00002461* Patch by Phillippe Robin, 16 Mar 2004:
2462 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2463
2464* Patch by Stephen Williams, 15 Mar 2004:
2465 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2466
2467* Patch by Tolunay Orkun, 15 Mar 2004:
2468 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2469
2470* Patch by Travis Sawyer, 15 Mar 2004:
2471 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2472
wdenkefa329c2004-03-23 20:18:25 +00002473* Add start-up delay to make sure power has stabilized before
2474 attempting to switch on USB on SX1 board.
2475
2476* Patch by Josef Wagner, 18 Mar 2004:
2477 - Add support for MicroSys XM250 board (PXA255)
2478 - Add support for MicroSys PM828 board (MPC8280)
2479 - Add support for 32 MB Flash on PM825/826
2480 - new SDRAM refresh rate for PM825/PM826
2481 - added support for MicroSys PM520 (MPC5200)
2482 - replaced Query by Identify command in CPU86/flash.c
2483 to support 28F160F3B
2484
2485* Fix wrap around problem with udelay() on ARM920T
2486
2487* Add support for Macronix flash on TRAB board
2488
wdenk7d7ce412004-03-17 01:13:07 +00002489* Patch by Pierre Aubert, 15 Mar 2004:
2490 Fix buffer overflow in IDE identification
2491
2492* Fix power-off of LCD for out-of-band temperatures on LWMON board
2493
2494* Remove redundand #define in IceCube.h
2495
wdenkd9df1f42004-03-15 09:00:01 +00002496* Patch by Steven Scholz, 27 Feb 2004:
2497 - Adding get_ticks() and get_tbclk() for AT91RM9200
2498 - Many white space fixes in cpu/at91rm9200/interrupts.c
2499
2500* Patches by Steven Scholz, 20 Feb 2004:
2501 some cleanup in AT91RM9200 related code
2502
wdenk855a4962004-03-14 18:23:55 +00002503* Patches by Travis Sawyer, 12 Mar 2004:
2504 - Fix Gigabit Ethernet support for 440GX
2505 - Add Gigabit Ethernet Support to MII PHY utilities
2506
2507* Patch by Brad Kemp, 12 Mar 2004:
2508 Fixes for drivers/cfi_flash.c:
2509 - Better support for x8/x16 implementations
2510 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2511 - Added defines for AMD command and address constants
2512
2513* Patch by Leon Kukovec, 12 Mar 2004:
2514 Fix get_dentfromdir() to correctly handle deleted dentries
wdenk42dfe7a2004-03-14 22:25:36 +00002515
wdenk855a4962004-03-14 18:23:55 +00002516* Patch by George G. Davis, 11 Mar 2004:
2517 Remove hard coded network settings in TI OMAP1610 H2
2518 default board config
2519
2520* Patch by George G. Davis, 11 Mar 2004:
2521 add support for ADS GraphicsClient+ board.
2522
wdenk7d7ce412004-03-17 01:13:07 +00002523* Patch by Pierre Aubert, 11 Mar 2004:
wdenk4b248f32004-03-14 16:51:43 +00002524 - add bitmap command and splash screen support in cfb console
2525 - add [optional] origin in the bitmap display command
2526
2527* Patch by Travis Sawyer, 11 Mar 2004:
2528 Fix ocotea board early init interrupt setup.
2529
2530* Patch by Thomas Viehweger, 11 Mar 2004:
2531 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2532
wdenkaaf224a2004-03-14 15:20:55 +00002533* Patch by Stephan Linz, 09 Mar 2004
2534 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2535
2536* Patch by George G. Davis, 9 Mar 2004:
2537 fix recent build failure for SA1100 target
2538
2539* Patch by Travis Sawyer, 09 Mar 2004:
2540 Support native interrupt mode for the IBM440GX.
2541 Previously it was running in 440GP compatibility mode.
2542
wdenk3d3befa2004-03-14 15:06:13 +00002543* Patch by Philippe Robin, 09 Mar 2004:
2544 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2545 Platform support.
2546
2547* Patch by Masami Komiya, 08 Mar 2004:
2548 Don't overwrite server IP address or boot file name
2549 when the boot server does not return values
2550
wdenk7d7ce412004-03-17 01:13:07 +00002551* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk3d3befa2004-03-14 15:06:13 +00002552 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2553
wdenk4d13cba2004-03-14 14:09:05 +00002554* Patch by Tolunay Orkun, 5 Mar 2004:
2555 Fix early board initialization for Cogent CSB272 board
2556
2557* Patch by Ed Okerson, 3 Mar 2004:
2558 fix CFI flash writes for little endian systems
2559
2560* Patch by Reinhard Meyer, 01 Mar 2004:
2561 generalize USB and IDE support for MPC5200 with according
2562 changes to IceCube.h and TOP5200.h
2563 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2564 add info about USB and IDE to README
2565
wdenkc3f9d492004-03-14 00:59:59 +00002566* Patch by Yuli Barcohen, 4 Mar 2004:
2567 Fix problems with GCC 3.3.x which changed handling of global
2568 variables explicitly initialized to zero (now in .bss instead of
2569 .data as before).
2570
2571* Patch by Leon Kukovec, 02 Mar 2004:
2572 add strswab() to fix IDE LBA capacity, firmware and model numbers
2573 on little endian machines
2574
2575* Patch by Masami Komiya, 02 Mar 2004:
2576 - Remove get_ticks() from NFS code
2577 - Add verification of RPC transaction ID
2578
2579* Patch by Pierre Aubert, 02 Mar 2004:
2580 cleanup for IDE and USB drivers for MPC5200
2581
2582* Patch by Travis Sawyer, 01 Mar 2004:
wdenk0e6d7982004-03-14 00:07:33 +00002583 Ocotea:
2584 - Add IBM PPC440GX Ref Platform support (Ocotea)
2585 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2586 Adapted to U-Boot and 440GX port
2587 440gx_enet.c:
2588 - Add gracious handling of all Ethernet Pin Selections for 440GX
2589 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2590 ppc440.h:
2591 - Add needed bit definitions
2592 - Fix formatting
2593
2594* Patch by Carl Riechers, 1 Mar 2004:
2595 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2596
2597* Patch by Stephan Linz, 27 Feb 2004
2598 - avoid problems for targets without NFS download support
2599
wdenkc40b2952004-03-13 23:29:43 +00002600* Patch by Rune Torgersen, 27 Feb 2004:
2601 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2602 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2603 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2604
2605* Patch by Masami Komiya, 27 Feb 2004:
2606 Fix rarpboot: add autoload by NFS
2607
2608* Patch by Dan Eisenhut, 26 Feb 2004:
2609 fix flash_write return value in saveenv
2610
2611* Patch by Stephan Linz, 11 Dec 2003
2612 expand config.mk to avoid trigraph warnings on NIOS
2613
2614* Rename "BMS2003" board into "HMI10"
2615
wdenk6629d2f2004-03-12 15:38:25 +00002616* SX1 patches: use "serial#" for USB serial #; use redundand environment
2617 storage; auto-set console on USB port (using preboot command)
2618
wdenk232c1502004-03-12 00:14:09 +00002619* Add support for SX1 mobile phone; add support for USB-based console
2620 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2621
wdenk79d696f2004-03-11 22:46:36 +00002622* Fix LOWBOOT configuration for MPC5200 with DDR memory
2623
wdenkf8d813e2004-03-02 14:05:39 +00002624* Fix SDRAM timings for LITE5200 / IceCube board
2625
2626* Handle Auti-MDIX / connection status for INCA-IP
2627
2628* Fix USB problems when attempting to read 0 bytes
2629
wdenke7c85682004-02-27 08:21:54 +00002630* Patch by Travis Sawyer, 26 Feb 2004:
2631 Fix broken compile for XPEDITE1K target.
2632
2633* Patch by Stephan Linz, 26 Feb 2004:
2634 Bug fix for NFS code on NIOS targets
wdenk232c1502004-03-12 00:14:09 +00002635
wdenke7c85682004-02-27 08:21:54 +00002636* Patch by Stephen Williams, 26 Feb 2004:
2637 Break up SystemACE reads of large block counts
2638
wdenk132ba5f2004-02-27 08:20:54 +00002639* Patch by Pierre Aubert, 26 Feb 2004
2640 add IDE support for MPC5200
2641
2642* Patch by Masami Komiya, 26 Feb 2004:
2643 add autoload via NFS
2644
2645* Patch by Stephen Williams
2646 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2647 elsewhere in the source.
2648
wdenk11dadd52004-02-27 00:07:27 +00002649* Patch by Steven Scholz, 25 Feb 2004:
2650 - Timeouts in FPGA code should be based on CFG_HZ
2651 - Minor cleanup in code for Altera FPGA ACEX1K
2652
2653* Patch by Steven Scholz, 25 Feb 2004:
2654 Changed "Directory Hierarchy" section in README
2655
2656* Patch by Masami Komiya, 25 Feb 2004:
2657 Reduce copy count in nfs_read_reply() of NFS code
2658
wdenk80885a92004-02-26 23:46:20 +00002659* Patch by Markus Pietrek, 24 Feb 2004:
2660 NS9750 DevBoard added
2661
wdenk132ba5f2004-02-27 08:20:54 +00002662* Patch by Pierre Aubert, 24 Feb 2004
wdenk80885a92004-02-26 23:46:20 +00002663 add USB support for MPC5200
2664
2665* Patch by Steven Scholz, 24 Feb 2004:
2666 - fix MII commands to use values from last command
2667
2668* Patch by Torsten Demke, 24 Feb 2004:
2669 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2670
wdenk0c852a22004-02-26 23:01:04 +00002671* Patch by Rahul Shanbhag, 19 Feb 2004:
2672 Fixes for for OMAP1610 board:
2673 - shift some IRQ specific code to platform.S file
2674 - remove duplicatewatchdog reset code from start.S
2675
2676* Make Auto-MDIX Support configurable on INCA-IP board
2677
2678* Fix license for mkimage tool
2679
wdenka084f7d2004-02-24 22:33:21 +00002680* Patch by Masami Komiya, 24 Feb 2004:
2681 Update NetBootFileXferSize in NFS code
2682
2683* Patch by Scott McNutt, 24 Feb 2004:
2684 fix packet length in NFS code
2685
wdenkcbd8a352004-02-24 02:00:03 +00002686* Patch by Masami Komiy, 22 Feb 2004:
2687 Add support for NFS for file download
2688
wdenk074cff02004-02-24 00:16:43 +00002689* Patch by Andrea Scian, 17 Feb 2004:
2690 Add support for S3C44B0 processor and DAVE B2 board
2691
2692* Patch by Steven Scholz, 20 Feb 2004:
2693 - Add support for MII commands on AT91RM9200 boards
2694 - some cleanup in AT91RM9200 ethernet code
2695
wdenk028ab6b2004-02-23 23:54:43 +00002696* Patch by Peter Ryser, 20 Feb 2004:
2697 Add support for the Xilinx ML300 platform
2698
2699* Patch by Stephan Linz, 17 Feb 2004:
2700 Fix watchdog support for NIOS
2701
2702* Patch by Josh Fryman, 16 Feb 2004:
2703 Fix byte-swapping for cfi_flash.c for different bus widths
2704
2705* Patch by Jon Diekema, 14 Jeb 2004:
2706 Remove duplicate "FPGA Support" notes from the README file
2707
wdenk63e73c92004-02-23 22:22:28 +00002708* Patches by Reinhard Meyer, 14 Feb 2004:
2709 - update board/emk tree; use common flash driver
2710 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2711 [adapted for other PPC CPUs -- wd]
2712 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2713
2714* Patch by Jon Diekema, 13 Feb 2004:
2715 Call show_boot_progress() whenever POST "FAILED" is printed.
2716
2717* Patch by Nishant Kamat, 13 Feb 2004:
2718 Add support for TI OMAP1610 H2 Board
2719 Fixes for cpu/arm926ejs/interrupt.c
2720 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2721 Fix for a timer bug in OMAP1610 Innovator
2722 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2723
2724* Patches by Stephan Linz, 12 Feb 2004:
2725 - add support for NIOS timer with variable period preload counter value
2726 - prepare POST framework support for NIOS targets
2727
2728* Patch by Denis Peter, 11 Feb 2004:
2729 add POST support for the MIP405 board
2730
wdenkcd0a9de2004-02-23 20:48:38 +00002731* Patch by Laurent Mohin, 10 Feb 2004:
2732 Fix buffer overflow in common/usb.c
2733
2734* Patch by Tolunay Orkun, 10 Feb 2004:
2735 Add support for Cogent CSB272 board
2736
wdenk2d1a5372004-02-23 19:30:57 +00002737* Patch by Thomas Elste, 10 Feb 2004:
2738 Add support for NET+50 CPU and ModNET50 board
2739
2740* Patch by Sam Song, 10 Feb 2004:
2741 Fix typos in cfi_flash.c
2742
2743* Patch by Leon Kukovec, 10 Feb 2004
2744 Fixed long dir entry slot id calculation in get_vfatname
2745
2746* Patch by Robin Gilks, 10 Feb 2004:
2747 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2748 !=, <>, <, >, <=, >=)
2749
wdenk3f85ce22004-02-23 16:11:30 +00002750* Fix problem with side effects in macros in include/usb.h
2751
2752* Patch by David Benson, 13 Nov 2003:
2753 bug 841358 - fix TFTP download size limit
2754
2755* Fixing bug 850768:
2756 improper flush_cache() in load_serial()
2757
2758* Fixing bug 834943:
2759 MPC8540 - missing volatile declarations
2760
2761* Patch by Stephen Williams, 09 Feb 2004:
2762 Add support for Xilinx SystemACE chip:
2763 - New files common/cmd_ace.c and include/systemace.h
2764 - Hook systemace support into cmd_fat and the partition manager
2765
2766* Patch by Travis Sawyer, 09 Feb 2004:
2767 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2768
wdenk3c74e322004-02-22 23:46:08 +00002769* Patch by Travis Sawyer, 09 Feb 2004:
2770 o 440GX:
2771 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2772 - Add phymode for 440 enet
2773 - fix pci pre init
2774 o XPedite1K:
2775 - Change board_pre_init to board_early_init_f
2776 - Add user flash to bus controller setup
2777 - Fix pci pre init
2778 - Fix is_pci_host to check GPIO for monarch bit
2779 - Force xpedite1k to pci conventional mode (via #define option)
2780
2781* Patch by Brad Kemp, 4 Feb 2004:
2782 - handle the machine check that is generated during the PCI scans
2783 on 82xx processors.
2784 - define the registers used in the IMMR by the PCI subsystem.
2785
2786* Patch by Pierre Aubert, 03 Feb 2004:
2787 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2788
2789* Patch by Jeff Angielski, 03 Feb 2004:
2790 Fix copy & paste error in cpu/mpc8260/pci.c
2791
2792* Patch by Reinhard Meyer, 24 Jan 2004:
2793 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2794
wdenkcf56e112004-02-20 22:02:48 +00002795* Add Auto-MDIX support for INCA-IP
2796
wdenkbf9e3b32004-02-12 00:47:09 +00002797* Some code cleanup
2798
2799* Patch by Josef Baumgartner, 10 Feb 2004:
2800 Fixes for Coldfire port
2801
2802* Patch by Brad Kemp, 11 Feb 2004:
2803 Fix CFI flash driver problems
2804
wdenka2d18bb2004-02-11 21:35:18 +00002805* Make sure to use a bus clock divider of 2 only when running TQM8xxM
2806 modules at CPU clock frequencies above 66 MHz.
wdenkbf9e3b32004-02-12 00:47:09 +00002807
wdenka2d18bb2004-02-11 21:35:18 +00002808* Optimize flash programming speed for LWMON (by another 100% :-)
2809
wdenkcd37d9e2004-02-10 00:03:41 +00002810* Patch by Jian Zhang, 3 Feb 2004:
2811 - Changed the incorrect FAT12BUFSIZE
2812 - data_begin in fsdata can be negative. Changed it to be short.
2813
wdenkec4c5442004-02-09 23:12:24 +00002814* Patches by Stephan Linz, 30 Jan 2004:
2815 1: - board/altera/common/flash.c:flash_erase():
2816 o allow interrupts befor get_timer() call
2817 o check-up each erased sector and avoid unexpected timeouts
2818 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2819 o enclose sevenseg_set() in cpp condition
2820 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2821 - fix some typed in mistakes in the NIOS documentation
2822 2: - split DK1C20 configuration into several header files:
2823 o two new files for each NIOS CPU description
2824 o U-Boot related part is remaining in DK1C20.h
2825 3: - split DK1S10 configuration into several header files:
2826 o two new files for each NIOS CPU description
2827 o U-Boot related part is remaining in DK1S10.h
2828 4: - Add support for the Microtronix Linux Development Kit
2829 NIOS CPU configuration at the Altera Nios Development Kit,
2830 Stratix Edition (DK-1S10)
2831 5: - Add documentation for the Altera Nios Development Kit,
2832 Stratix Edition (DK-1S10)
2833 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2834 (master only)
2835 7: - Add support for the common U-Boot SPI framework at
2836 RTC driver DS1306
2837
wdenkb98fff12004-02-09 20:51:26 +00002838* Patch by Rahul Shanbhag, 28 Jan 2004:
2839 Fix flash protection/locking handling for OMAP1610 innovator board.
2840
2841* Patch by Rolf Peukert, 28 Jan 2004:
2842 fix flash write problems on CSB226 board (write with 32 bit bus width)
2843
2844* Patches by Mark Jonas, 16 Jan 2004:
2845 - fix rounding error when calculating baudrates for MPC5200 PSCs
2846 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2847 time which is not supported
2848
wdenk5653fc32004-02-08 22:55:38 +00002849* Patch by Yuli Barcohen, 26 Jan 2004:
2850 Allow bzip2 compression for small memory footprint boards
2851
2852* Patch by Brad Kemp, 21 Jan 2004:
2853 Add support for CFI flash driver for both the Intel and the AMD
2854 command sets.
2855
2856* Patch by Travis Sawyer, 20 Jan 2004:
2857 Fix pci bridge auto enumeration of sibling p2p bridges.
2858
2859* Patch by Tolunay Orkun, 12 Jan 2004:
2860 Add some delays as needed for Intel LXT971A PHY support
2861
2862* Patches by Stephan Linz, 09 Jan 2004:
2863 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2864 - make DK1C20 board configuration related to ASMI conform to
2865 documentation
2866
wdenkf6e20fc2004-02-08 19:38:38 +00002867* Patch by Anders Larsen, 09 Jan 2004:
2868
2869 ARM memory layout fixes: the abort-stack is now set up in the
2870 correct RAM area, and the BSS is zeroed out as it should be.
2871
2872 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2873 of the linker scripts are replaced by '__bss_start' and '_end',
2874 resp., which is a further step to eliminate unnecessary differences
2875 between the implementation of the CPU architectures.
2876
wdenkf4863a72004-02-07 01:27:10 +00002877* Patch by liang a lei, 9 Jan 2004:
2878 Fix Intel 28F128J3 ID in include/flash.h
2879
2880* Patch by Masami Komiya, 09 Jan 2004:
2881 add support for TB0229 board (NEC VR4131 MIPS processor)
2882
2883* Patch by Leon Kukovec, 12 Dec 2003:
2884 changed extern __inline__ into static __inline__ in
2885 include/linux/byteorder/swab.h
2886
wdenkba56f622004-02-06 23:19:44 +00002887* Patch by Travis Sawyer, 30 Dec 2003:
2888 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2889 select MDI port based on enabled EMAC device.
2890 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2891 base PrPMC board.
2892
wdenka6cccae2004-02-06 21:48:22 +00002893* Patch by Wolter Kamphuis, 15 Dec 2003:
2894 made CONFIG_SILENT_CONSOLE usable on all architectures
2895
2896* Disable date command on TQM866M - there is no RTC on MPC866
2897
wdenk75d1ea72004-01-31 20:06:54 +00002898* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2899
wdenk68766092004-01-29 09:22:58 +00002900* Implement adaptive SDRAM timing configuration based on actual CPU
2901 clock frequency for INCA-IP; fix problem with board hanging when
2902 switching from 150MHz to 100MHz
2903
2904* Add PCMCIA CS support for BMS2003 board
2905
wdenkc178d3d2004-01-24 20:25:54 +00002906* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2907 see doc/README.MPC866 for details;
2908 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2909 calculate CPU clock frequency from PLL register values.
2910
2911* Add support for 128 MB RAM on TQM8xxL/M modules
2912
wdenkef978732004-01-21 20:46:28 +00002913* Fix PS/2 keyboard problem caused by statically initialized variable
2914 pointing to a location in flash
2915
2916* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2917
wdenkc837dcb2004-01-20 23:12:12 +00002918* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2919 before we can access it; add delay in case we are faster (with no
2920 CF card inserted)
2921
2922* Cleanup of some init functions
2923
2924* Make sure SCC Ethernet is always stopped by the time we boot Linux
2925 to avoid Linux crashes by early packets coming in.
2926
2927* Accelerate flash accesses on LWMON board by using buffered writes
2928
wdenkb0aef112004-01-18 18:21:54 +00002929* Fix typo in Makefile;
2930 fix problem with PARTNUM detection
2931
wdenk1c437712004-01-16 00:30:56 +00002932* Patch by Reinhard Meyer, 09 Jan 2004:
2933 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2934
2935* Add support for IDE LED on BMS2003 board
2936 (exclusive with status LED!)
2937
2938* Add support for PS/2 keyboard (used with PS/2 multiplexor on
2939 BMS2003 board)
2940
2941* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2942 Add common files for "emk" boards
2943
wdenkc83bf6a2004-01-06 22:38:14 +00002944* Add a common get_ram_size() function and modify the the
2945 board-specific files to invoke that common implementation.
2946
2947======================================================================
wdenkb34ff812004-01-06 11:13:56 +00002948Changes for U-Boot 1.0.1:
wdenk5cf9da42003-11-07 13:42:26 +00002949======================================================================
2950
wdenkb34ff812004-01-06 11:13:56 +00002951* Set default clock for INCA-IP to 150 MHz
2952
wdenka522fa02004-01-04 22:51:12 +00002953* Make BMS2003 use a separate config file to avoid #ifdef mess;
2954 add I2C support; add support for DS1337 RTC
2955
2956* Add CompactFlash support for BMS2003 board
2957
2958* Add support for status LED on BMS2003 board
2959
wdenk180d3f72004-01-04 16:28:35 +00002960* Patch by Scott McNutt, 02 Jan 2004:
2961 Add support for the Nios Active Serial Memory Interface (ASMI)
2962 on Cyclone devices
2963
2964* Patch by Andrea Marson, 16 Dec 2003:
2965 Add support for the PPChameleon ME and HI modules
2966
2967* Patch by Yuli Barcohen, 22 Dec 2003:
2968 Add support for Motorola DUET ADS board (MPC87x/88x)
2969
wdenkdd875c72004-01-03 21:24:46 +00002970* Patch by Robert Schwebel, 15 Dec 2003:
2971 add support for cramfs (uses JFFS2 command interface)
2972
wdenkc935d3b2004-01-03 19:43:48 +00002973* Patches by Stephan Linz, 11 Dec 2003:
2974 - more documentation for NIOS port
2975 - new struct nios_pio_t, struct nios_spi_t
2976 - Reconfiguration for NIOS Development Kit DK1C20:
2977 o move board related code from board/dk1c20
2978 to board/altera/dk1c20
2979 o create a new common source path board/altera/common
2980 and move generic flash access stuff into it
2981 o change/expand configuration file DK1C20.h
2982 - Add support for NIOS Development Kit DK1S10
2983 - Add status LED support for NIOS systems
2984 - Add dual 7-segment LED support for Altera NIOS DevKits
2985
wdenk3a473b22004-01-03 00:43:19 +00002986* Patch by Ronen Shitrit, 10 Dec 2003:
2987 Add support for the Marvell DB64360 / DB64460 development boards
2988
2989* Patch by Detlev Zundel, 10 Dec 2003:
2990 fix dependency problem in examples/Makefile
2991
wdenkb6e4c402004-01-02 16:05:07 +00002992* Patch by Denis Peter, 8 Dec 2003
2993 - add support for the PATI board (MPC555)
2994 - add SPI support for the MPC5xx
2995
2996* Patch by Anders Larsen, 08 Dec 2003:
2997 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
2998 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
2999 cleanup some redundand #defines
3000
wdenk63f34912004-01-02 15:01:32 +00003001* Patch by André Schwarz, 8 Dec 2003:
3002 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
3003 - TX and RX deskriptors must be quad-word aligned
3004 - does not work with only one TX deskriptor
3005 - standard reset method does not work
3006
3007* Patch by Masami Komiya, 08 Dec 2003:
3008 add RTL8139 ethernet driver
3009
3010* Patches by Ed Okerson, 07 Dec 2003:
3011 - fix ethernet for the AU1x00 processors in little-endian mode.
3012 - extend memsetup.S for the AU1x00 processors in BE and LE modes
3013
wdenkd4ca31c2004-01-02 14:00:00 +00003014* Minor code cleanup (coding style)
3015
3016* Patch by Reinhard Meyer, 30 Dec 2003:
3017 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
3018 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
3019 - turned debug print of PHY registers into a function (called in two places)
3020 - added support for EMK MPC5200 based modules
3021
3022* Fix MPC8xx PLPRCR_MFD_SHIFT typo
3023
3024* Add support for TQM866M modules
3025
3026* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
3027
3028* Fix a few compiler warnings
3029
wdenkc1896002003-12-28 11:44:59 +00003030* Patch by Reinhard Meyer, 28 Dec 2003:
3031 Add initial support for TOP5200 board
3032
wdenk7cb22f92003-12-27 19:24:54 +00003033* Make CPU clock on ICA-IP board controllable by a "cpuclk"
3034 environment variable which can set to "100", "133", or "150". The
3035 CPU clock will be configured accordingly upon next reboot. Other
3036 values are ignored. In case of an invalid or undefined "cpuclk"
3037 value, the compile-time default CPU clock speed will be used.
3038
3039* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
3040 window that is used to access the UART registers by the Linux driver)
3041
3042* Patch by Reinhard Meyer, 20 Dec 2003:
3043 Fix clock calculation for the MPC5200 for higher clock frequencies
3044 (above 2**32 / 10 = 429.5 MHz).
3045
3046* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
3047
wdenkb2001f22003-12-20 22:45:10 +00003048* Fix IceCube CLKIN configuration (it's 33.000000MHz)
3049
3050* Add new configuration for IceCube board with DDR memory
3051
3052* Update TRAB memory configurations
3053
wdenk5c745d22003-12-12 00:02:26 +00003054* Add JFFS2 support for INCA-IP board
3055
stroesed4f58f72003-12-09 15:04:55 +00003056* Patch by Bill Hargen, 09 Dec 2003:
3057 - BUBINGA405EP: changed flash driver to protect top sector containing
3058 first instruction.
3059 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
3060 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
3061 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
3062 - 405EP: added/fixed support for "reginfo" command.
3063 - 4xx: removed spurious MII error messages on "mii info" command.
3064
wdenk4e5ca3e2003-12-08 01:34:36 +00003065* Patch by Bernhard Kuhn, 28 Nov 2003:
3066 add support for Coldfire CPU
3067 add support for Motorola M5272C3 and M5282EVB boards
3068
wdenk9fd5e312003-12-07 23:55:12 +00003069* Patch by Pierre Aubert, 24 Nov 2003:
3070 - add a return value for the fpga command
3071 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
3072 is defined. If ide_preinit fails, ide_init is aborted.
3073 - fix an endianess problem in fat.h
3074
wdenk3bbc8992003-12-07 22:27:15 +00003075* Patch by Wolter Kamphuis, 05 Dec 2003:
3076 Add support for SNMC's QS850/QS823/QS860T boards
3077
wdenkb028f712003-12-07 21:39:28 +00003078* Patch by Yuli Barcohen, 3 Dec 2003:
3079 "revive" U-Boot support for old Motorola MPC860ADS board
3080
3081* Patch by Cam(ilo?), 03 Dec 2003:
3082 make examples build even with broken Montavista objcopy
3083
3084* Patch by Pavel Bartusek, 27 Nov 2003:
3085 fix conversion problem with "bootretry" evironment variable
3086
wdenkb4676a22003-12-07 19:24:00 +00003087* Patch by Andre Schwarz, 24 Nov 2003:
3088 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
3089
3090* Patch by Pavel Bartusek, 21 Nov 2003:
3091 set ZMII bridge speed on 440
3092
3093* Patch by Anders Larsen, 17 Nov 2003:
3094 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
3095
wdenka2663ea2003-12-07 18:32:37 +00003096* Patches by David Müller, 14 Nov 2003:
3097 - board/mpl/common/common_util.c
3098 * implement support for BZIP2 compressed images
3099 * various cleanups (printf -> puts, ...)
3100 - board/mpl/common/flash.c
3101 * report correct errors to upper layers
3102 * check the erase fail and VPP low bits in status reg
3103 - board/mpl/vcma9/cmd_vcma9.c
3104 - board/mpl/vcma9/flash.c
3105 * various cleanups (printf -> puts, ...)
3106 - common/cmd_usb.c
3107 * fix typo in comment
3108 - cpu/arm920t/usb_ohci.c
3109 * support for S3C2410 is missing in #if line
3110 - drivers/cs8900.c
3111 * reinit some registers in case of error (cable missing, ...)
3112 - fs/fat/fat.c
3113 * support for USB/MMC devices is missing in #if line
3114 - include/configs/MIP405.h
3115 - include/configs/PIP405.h
3116 * enable BZIP2 support
3117 * enlarge malloc space to 1MiB because of BZIP2 support
3118 - include/configs/VCMA9.h
3119 * enable BZIP2 support
3120 * enlarge malloc space to 1MiB because of BZIP2 support
3121 * enable USB support
3122 - lib_arm/armlinux.c
3123 * change calling convention of ARM Linux kernel as
3124 described on http://www.arm.linux.org.uk/developer/booting.php
3125
3126* Patch by Thomas Lange, 14 Nov 2003:
3127 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
3128 support all these AMD boards.
3129
3130* Patch by Thomas Lange, 14 Nov 2003:
3131 Workaround for mips au1x00 physical memory accesses (the au1x00
3132 uses a 36 bit bus internally and cannot access physical memory
3133 directly. Use the uncached SDRAM address instead of the physical
3134 one.)
3135
wdenkef5a9672003-12-07 00:46:27 +00003136* Patch by Xue Ligong (Joe), 13 Nov 2003:
3137 add Realtek 8019 ethernet driver
3138
3139* Patch by Yuli Barcohen, 13 Nov 2003:
3140 MPC826xADS/PQ2FADS cleanup
3141
3142* Patch by Anders Larsen, 12 Nov 2003:
3143 Update README to mark the PORTIO commands non-standard
3144
wdenk5779d8d2003-12-06 23:55:10 +00003145* Patch by Nicolas Lacressonnière, 12 Nov 2003:
3146 update for for Atmel AT91RM9200DK development kit:
3147 - support for environment variables in DataFlash
3148 - Atmel DataFlash AT45DB1282 support
3149
3150* Patch by Jeff Carr, 11 Nov 2003:
3151 add support for new version of 8270 processors
3152
3153* Patches by George G. Davis, 05 Nov 2003:
3154 - only pass the ARM linux initrd tag to the kernel when an initrd
3155 is actually present
3156 - update omap1510inn configuration file
3157
wdenk8bf3b002003-12-06 23:20:41 +00003158* Patches by Stephan Linz, 3 Nov 2003:
3159 - more endianess fixes for LAN91C111 driver
3160 - CFG_HZ configuration patch for NIOS Cyclone board
3161
3162* Patch by Stephan Linz, 28 Oct 2003:
3163 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
3164
3165* Patch by Steven Scholz, 20 Oct 2003:
3166 - make "mii info <addr>" show infor for PHY at "addr" only
3167 - Endian fix for miiphy_info()
3168
wdenka8c7c702003-12-06 19:49:23 +00003169* Patch by Gleb Natapov, 19 Sep 2003:
3170 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
3171
3172* Patch by Anders Larsen, 17 Sep 2003:
3173 Bring ARM memory layout in sync with the documentation:
3174 stack and malloc-heap are now located _below_ the U-Boot code
3175
wdenkfa1399e2003-12-06 11:20:01 +00003176* Accelerate booting on TRAB board: read and check autoupdate image
3177 headers first instead of always reading the whole images.
3178
wdenkb96619a2003-12-05 21:08:38 +00003179* Fix type in MPC5XXX code (pointed out by Victor Wren)
3180
wdenkaf6d1df2003-12-03 23:53:42 +00003181* Enabled password check on RMU board
3182
3183* Fix configuration problem with IceCube in LOWBOOT configuration:
3184 envrionment got embedded, corrupting the image layout.
3185
3186* Fix NEC display names (it's 6440 [for 640x480], not 6640).
3187
wdenkfd3103b2003-11-25 16:55:19 +00003188* Added BMS2003 board
3189 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
3190
wdenkb4757ce2003-11-17 21:45:27 +00003191* Fix flash driver for TRAB board (must use Unlock Bypass Reset
3192 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
3193 and CPLD
3194
wdenk5bb226e2003-11-17 21:14:37 +00003195* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
3196 recent tools
3197
3198* Add checksum verification to 'imls' command
3199
3200* Add bd_info fields needed for 4xx Linux I2C driver
3201
3202* Patch by Martin Krause, 4 Nov. 2003:
3203 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
3204
3205* Print used network interface when CONFIG_NET_MULTI is set
3206
wdenk5cf9da42003-11-07 13:42:26 +00003207* Patch by Bernhard Kuhn, 28 Oct 2003:
3208 Add low boot support for MPC5200
3209
3210* Fix problem with dual PCMCIA support (NSCU)
3211
3212* Fix MPC5200 I2C initialization function
3213
3214======================================================================
wdenka43278a2003-09-11 19:48:06 +00003215Changes for U-Boot 1.0.0:
3216======================================================================
3217
wdenkb13fb012003-10-30 21:49:38 +00003218* Fix parameter passing to standalone images with bootm command
3219
3220* Patch by Kyle Harris, 30 Oct 2003:
3221 Fix build errors for ixdp425 board
3222
3223* Patch by David M. Horn, 29 Oct 2003:
3224 Fixes to build under CYGWIN
3225
3226* Get IceCube MGT5100 working (again)
3227
wdenk5fa66df2003-10-29 23:18:55 +00003228* Fix problems in memory test on some boards (which was not
3229 non-destructive as intended)
3230
3231* Patch by Gary Jennejohn, 28 Oct 2003:
3232 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
3233 to prevent stack overflow on ARM systems
3234
wdenka0f2fe52003-10-28 09:14:21 +00003235* Patch by Stephan Linz, 28 Oct 2003:
3236 fix init sequence error for NIOS port
3237
3238* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
3239
3240* Add CONFIG_VERSION_VARIABLE to TRAB configuration
3241
wdenka57a4962003-10-26 22:52:58 +00003242* Patch by Xiao Xianghua, 23 Oct 2003:
3243 small patch for mpc85xx
3244
3245* Fix small problem in MPC5200 I2C driver
3246
3247* Fix FCC3 support on ATC board
3248
dzu8cb81432003-10-24 13:14:45 +00003249* Correct header printing for multi-image files in do_bootm()
3250
3251* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
3252
wdenk4654af22003-10-22 09:00:28 +00003253* Fix PCI problems on PPChameleon board
3254
wdenka3ad8e22003-10-19 23:22:11 +00003255* Patch by Steven Scholz, 18 Oct 2003:
3256 Fix AT91RM9200 ethernet driver
3257
3258* Patch by Nye Liu, 17 Oct 2003:
3259 Fix typo in include/mpc8xx.h
3260
3261* Patch by Richard Woodruff, 16 Oct 03:
3262 Fixes for cpu/arm925/interrupt.c
3263 - Initialize timestamp & lastdec vars.
3264 - fix timestamp overflows.
3265 - fix lastdec overflow.
3266 - smarter normalization to allow udelay() below 1ms to work.
3267
3268* Patch by Scott McNutt, 16 Oct
3269 add networking support for the Altera Nios Development Kit,
3270 Cyclone Edition (DK-1C20)
3271
3272* Patch by Jon Diekema, 14 Oct 2003:
3273 add hint about doc/README.silent to README file
3274
dzue7df0292003-10-19 21:43:26 +00003275* Add CompactFlash support for NSCU
3276
wdenkd7281f42003-10-19 22:30:08 +00003277* Fix PCI problems on PPChameleonEVB
3278
wdenk3d1e8a92003-10-16 12:53:35 +00003279* TRAB auto-update: Base decision if we have to strip the image
3280 header on image type as encoded in the header
wdenkd7281f42003-10-19 22:30:08 +00003281 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk3d1e8a92003-10-16 12:53:35 +00003282
wdenk42d1f032003-10-15 23:53:47 +00003283* Patches by Xianghua Xiao, 15 Oct 2003:
3284
3285 - Added Motorola CPU 8540/8560 support (cpu/85xx)
3286 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
3287 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
3288
3289* Fix flash timings on TRAB board
3290
wdenk2d5b5612003-10-14 19:43:55 +00003291* Make sure HUSH is initialized for running auto-update scripts
3292
3293* Make 5200 reset command _really_ reset the board, without running
3294 any other code after it
3295
3296* Fix errors with flash erase when range spans across banks
3297 that are mapped in reverse order
3298
3299* Fix flash mapping and display on P3G4 board
3300
3301* Patch by Kyle Harris, 15 Jul 2003:
3302 - add support for Intel IXP425 CPU
3303 - add support for IXDP425 eval board
3304
wdenkf72da342003-10-10 10:05:42 +00003305* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
3306 for more information
3307
wdenk5da627a2003-10-09 20:09:04 +00003308* Patch by Steven Scholz, 10 Oct 2003
3309 - Add support for Altera FPGA ACEX1K
3310
wdenk15647dc2003-10-09 19:00:25 +00003311* Patches by Thomas Lange, 09 Oct 2003:
3312 - fix cmd_ide.c for non ppc boards (read/write functions did not
3313 add ATA base address)
3314 - fix for shannon board
3315 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk5da627a2003-10-09 20:09:04 +00003316 - Endian swap ATA identity for all big endian CPUs, not just PPC
3317 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
3318 args to linux
3319 - add support for dbau1x00 board (MIPS32)
wdenk15647dc2003-10-09 19:00:25 +00003320
3321* Patch by Sangmoon Kim, 07 Oct 2003:
3322 add support for debris board
3323
wdenka0ff7f22003-10-09 13:16:55 +00003324* Patch by Martin Krause, 09 Oct 2003:
3325 Fixes for TRAB board
3326 - /board/trab/rs485.c: correct baudrate
wdenk42d1f032003-10-15 23:53:47 +00003327 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenka0ff7f22003-10-09 13:16:55 +00003328 udelay(); fix some timing problems with adc controller
3329 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
3330 modify commands: touch and buzzer
3331
3332* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
3333 (quick & dirty workaround for rogue pointer problem in get_vfatname());
3334 Use direct function calls for auto_update instead of hush commands
3335
wdenk4a551702003-10-08 23:26:14 +00003336* Patch by Scott McNutt, 04 Oct 2003:
3337 - add support for Altera Nios-32 CPU
3338 - add support for Nios Cyclone Development Kit (DK-1C20)
3339
3340* Patch by Steven Scholz, 29 Sep 2003:
3341 - A second parameter for bootm overwrites the load address for
3342 "Standalone Application" images.
3343 - bootm sets environment variable "filesize" to the resulting
3344 (uncompressed) data length for "Standalone Application" images
3345 when autostart is set to "no". Now you can do something like
3346 if bootm $fpgadata $some_free_ram ; then
3347 fpga load 0 $some_free_ram $filesize
3348 fi
3349
3350* Patch by Denis Peter, 25 Sept 2003:
3351 add support for the MIP405 Rev. C board
3352
wdenk54387ac2003-10-08 22:45:44 +00003353* Patch by Yuli Barcohen, 25 Sep 2003:
3354 add support for Zephyr Engineering ZPC.1900 board
3355
3356* Patch by Anders Larsen, 23 Sep 2003:
3357 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
3358 implemented for the x86 architecture)
3359
wdenkfc3e2162003-10-08 22:33:00 +00003360* Patch by Sangmoon Kim, 23 Sep 2003:
3361 fix pll_pci_to_mem_multiplier table for MPC8245
3362
3363* Patch by Anders Larsen, 22 Sep 2003:
3364 enable timed autoboot on PXA
3365
3366* Patch by David Müller, 22 Sep 2003:
wdenkfc3e2162003-10-08 22:33:00 +00003367 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
3368 returns correct libgcc file path
3369 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
3370 time on s3c24x0 systems
3371
3372* Patch by Jon Diekema, 19 Sep 2003:
3373 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
3374 link state to the fault LED.
3375 - In NetLoop, make the Fault LED reflect the link status. The link
3376 status gets updated on entry, and on timeouts.
wdenk42d1f032003-10-15 23:53:47 +00003377
wdenkef1464c2003-10-08 22:14:02 +00003378* Patch by Anders Larsen, 18 Sep 2003:
3379 allow mkimage to build and run on Cygwin-hosted systems
3380
3381* Patch by Frank Müller, 18 Sep 2003:
3382 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3383 cpu/mpc8xx/fec.c
3384
3385* Patch by Pantelis Antoniou, 16 Sep 2003:
3386 add tool to compute fileds in the PLPRCR register for MPC86x
3387
wdenkd9a405a2003-10-07 20:01:55 +00003388* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3389
wdenk147031a2003-10-07 10:33:38 +00003390* Fix build problems under FreeBSD
3391
wdenk887b3722003-10-06 22:00:45 +00003392* Add generic filesystem image type
3393
wdenkfbe4b5c2003-10-06 21:55:32 +00003394* Make fatload set filesize environment variable
3395
3396* enable basic / medium / high-end configurations for PPChameleonEVB
3397 board; fix NAND code
3398
3399* enable TFTP client code to specify to the server the desired
3400 timeout value (see RFC-2349)
3401
dzubb65a312003-09-30 15:22:12 +00003402* Improve SDRAM setup for TRAB board
3403
dzu88a1bfa2003-09-30 15:11:43 +00003404* Suppress all output with splashscreen configured only if "splashimage"
3405 is set
3406
dzucad07372003-09-30 14:36:51 +00003407* Fix problems with I2C support for mpc5200
3408
dzu8a42eac2003-09-29 21:55:54 +00003409* Adapt TRAB configuration and auto_update to new memory layout
3410
dzu91e940d2003-09-25 22:32:40 +00003411* Add configuration for wtk board
3412
dzu29127b62003-09-25 22:30:12 +00003413* Add support for the Sharp LQ065T9DR51U LCD display
3414
wdenk206c60c2003-09-18 10:02:25 +00003415* Patch by Rune Torgersen, 17 Sep 2003:
3416 - Fixes for MPC8266 default config
wdenk65bd0e22003-09-18 10:45:21 +00003417 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk206c60c2003-09-18 10:02:25 +00003418
3419* Patches by Jon Diekema, 17 Sep 2003:
3420 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3421 env_common.c)
3422 - sbc8260 tweaks
3423 - adjust "help" output
3424
wdenk5f535fe2003-09-18 09:21:33 +00003425* Patches by Anders Larsen, 17 Sep 2003:
3426 - fix spelling errors
3427 - set GD_FLG_DEVINIT flag only after device function pointers
3428 are valid
3429 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3430 writeable
3431 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3432 - trigger watchdog while waiting in serial driver
3433
wdenkb0639ca2003-09-17 22:48:07 +00003434* Add auto-update code for TRAB board using USB memory sticks,
3435 support new configuration with more memory
wdenkf54ebdf2003-09-17 15:10:32 +00003436
wdenkef709e92003-09-16 17:35:37 +00003437* disable MPC5200 bus pipelining as workaround for bus contention
3438
wdenk4aeb2512003-09-16 17:06:05 +00003439* Modify XLB arbiter priorities on MPC5200 so all devices use same
3440 priority; configure critical interrupts to be handled like external
3441 interrupts
3442
wdenkacf98e72003-09-16 11:39:10 +00003443* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3444 go back to 66 MHz for stability
3445
wdenk78137c32003-09-15 18:00:00 +00003446* Patches by Jon Diekema, 15 Sep 2003:
3447 - add description for missing CFG_CMD_* entries in the README file
3448 - sacsng tweaks
3449
wdenk35656de2003-09-14 19:08:39 +00003450* Patch by Gleb Natapov, 14 Sep 2003:
3451 enable watchdog support for all MPC824x boards that have a watchdog
3452
3453* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3454 "Non-octet Aligned Frame" errors we see at 100 Mbps
3455
3456* Patch by Sharad Gupta, 14 Sep 2003:
3457 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3458
wdenk200f8c72003-09-13 19:13:29 +00003459* Patch by llandre, 11 Sep 2003:
3460 update configuration for PPChameleonEVB board
3461
wdenk531716e2003-09-13 19:01:12 +00003462* Patch by David Müller, 13 Sep 2003:
3463 various changes to VCMA9 board specific files
3464
3465* Add I2C support for MGT5100 / MPC5200
3466
wdenkb70e7a02003-09-12 20:09:09 +00003467* Patch by Rune Torgersen, 11 Sep 2003:
3468 Changed default memory option on MPC8266ADS to NOT be Page Based
3469 Interleave, since this doesn't work very well with the standard
3470 16MB DIMM
3471
3472* Patch by George G. Davis, 12 Sep 2003:
3473 fix Makefile settings for sk98 driver
3474
stroese68ce8952003-09-12 08:57:52 +00003475* Patch by Stefan Roese, 12 Sep 2003:
3476 - new boards added: DP405, HUB405, PLU405, VOH405
3477 - some esd boards updated
3478 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3479 first values
3480 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3481
wdenk4f7cb082003-09-11 23:06:34 +00003482* Patch by Martin Krause, 11 Sep 2003:
3483 add burn-in tests for TRAB board
3484
3485* Enable instruction cache on MPC5200 board
3486
wdenka43278a2003-09-11 19:48:06 +00003487* Patch by Denis Peter, 11 Sep 2003:
3488 - fix USB data pointer assignment for bulk only transfer.
3489 - prevent to display erased directories in FAT filesystem.
3490
3491* Change output format for NAND flash - make it look like for other
3492 memory, too
3493
3494======================================================================
wdenk149dded2003-09-10 18:20:28 +00003495Changes for U-Boot 0.4.8:
wdenkd94f92c2003-08-28 09:41:22 +00003496======================================================================
3497
dzu29127b62003-09-25 22:30:12 +00003498* Add I2C and RTC support for RMU board
3499
wdenk7205e402003-09-10 22:30:53 +00003500* Patches by Denis Peter, 9 Sep 2003:
3501 add FAT support for IDE, SCSI and USB
3502
3503* Patches by Gleb Natapov, 2 Sep 2003:
3504 - cleanup of POST code for unsupported architectures
3505 - MPC824x locks way0 of data cache for use as initial RAM;
3506 this patch unlocks it after relocation to RAM and invalidates
3507 the locked entries.
3508
3509* Patch by Gleb Natapov, 30 Aug 2003:
3510 new I2C driver for mpc107 bridge. Now works from flash.
3511
3512* Patch by Dave Ellis, 11 Aug 2003:
3513 - JFFS2: fix typo in common/cmd_jffs2.c
3514 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3515 - JFFS2: remove node version 0 warning
3516 - JFFS2: accept JFFS2 PADDING nodes
3517 - SXNI855T: add AM29LV800 support
3518 - SXNI855T: move environment from EEPROM to flash
3519 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3520
3521* Patch by Bill Hargen, 11 Aug 2003:
3522 fixes for I2C on MPC8240
3523 - fix i2c_write routine
3524 - fix iprobe command
3525 - eliminates use of global variables, plus dead code, cleanup.
3526
wdenk149dded2003-09-10 18:20:28 +00003527* Add support for USB Mass Storage Devices (BBB)
3528 (tested with USB memory sticks only)
3529
3530* Avoid flicker on TRAB's VFD
3531
wdenk7152b1d2003-09-05 23:19:14 +00003532* Add support for SK98xx driver
3533
3534* Add PCI support for SL8245 board
3535
3536* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3537 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3538 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3539
3540* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3541 to allow for more accurate baudrate settings
3542 (error now 0.7% at 115 kbps, instead of 3.5% before)
3543
3544* Patch by Andreas Mohr, 4 Sep 2003:
3545 Fix a lot of spelling errors
3546
wdenk12f34242003-09-02 22:48:03 +00003547* Add support for PPChameleon Eval Board
3548
3549* Add support for P3G4 board
3550
3551* Fix problem with MGT5100 FEC driver: add "early" MAC address
3552 initialization
3553
wdenk326428c2003-08-31 18:37:54 +00003554* Patch by Yuli Barcohen, 7 Aug 2003:
3555 check BCSR to detect if the board is configured in PCI mode
3556
wdenk149dded2003-09-10 18:20:28 +00003557======================================================================
3558Changes for U-Boot 0.4.7:
3559======================================================================
3560
wdenk0cb61d72003-08-30 00:05:50 +00003561* Patch by Raghu Krishnaprasad, 7 Aug 2003:
3562 add support for Adder II MPC852T module
3563
wdenk6f213472003-08-29 22:00:43 +00003564* Patch by George G. Davis, 19 Aug 2003:
3565 fix TI Innovator/OMAP1510 pin configs
3566
3567* Patches by Kshitij, 18 Aug 2003
3568 - add support for arm926ejs cpu core
3569 - add support for TI OMAP 1610 Innovator Board
3570
wdenkc29fdfc2003-08-29 20:57:53 +00003571* Patch by Yuli Barcohen, 14 Aug 2003:
3572 add support for bzip2 uncompression
3573
3574* Add GCC library to examples/Makefile so GCC utility functions will
3575 be resolved, too
3576
wdenkca75add2003-08-29 10:05:53 +00003577* Add I2C and RTC support for RMU board using software I2C driver
3578 (because of better response to iprobe command); fix problem with
3579 "reset" command
3580
stroese437ce072003-08-28 14:24:37 +00003581* Patch by Matthias Fuchs, 28 Aug 2003:
3582 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3583 CONFIG_BOOTP_MAKS (see README).
3584
wdenkd94f92c2003-08-28 09:41:22 +00003585* Fix ICU862 environment problem
3586
3587* Fix RAM size detection for RMU board
3588
3589* Implement "reset" for MGT5100/MPC5200 systems
3590
3591======================================================================
3592Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +00003593======================================================================
3594
wdenke0ac62d2003-08-17 18:55:18 +00003595* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3596 allow selection of clock frequency as "make" target
3597
3598* Implement memory autosizing code for IceCube boards
3599
3600* Configure network port on INCA-IP for autonegotiation
3601
3602* Fix overflow problem in network timeout code
3603
3604* Patch by Richard Woodruff, 8 Aug 2003:
3605 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3606
wdenkd94f92c2003-08-28 09:41:22 +00003607======================================================================
3608Changes for U-Boot 0.4.5:
3609======================================================================
3610
wdenkae3af052003-08-07 22:18:11 +00003611* Update for TQM board defaults:
3612 disable clocks_in_mhz, enable boot count limit
3613
dzu9374fa22003-08-07 15:04:48 +00003614* Removed tools/gdb from "make all" target. Added make target "gdbtools"
3615 in toplevel directory instead. Removed astest.c from tools/gdb because
3616 it is no longer relevant.
3617
wdenk96e48cf2003-08-05 18:22:44 +00003618* Fix PCI support for MPC5200 / IceCube Board
3619
wdenkbdccc4f2003-08-05 17:43:17 +00003620* Map ISP1362 USB OTG controller for NSCU board
3621
3622* Patch by Brad Parker, 02 Aug 2003:
3623 fix sc520_cdp problems
3624
3625* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3626
3627* Allow erase command to cross flash bank boundaries
3628
wdenk1f4bb372003-07-27 00:21:01 +00003629* Patch by Scott McNutt, 21 Jul 2003:
3630 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3631 Both LynxOS and BlueCat linux KDIs are supported.
3632
3633* Patch by Richard Woodruff, 25 Jul 2003:
3634 use more reliable reset for OMAP/925T
3635
3636* Patch by Nye Liu, 25 Jul 2003:
3637 fix typo in mpc8xx.h
3638
3639* Patch by Richard Woodruff, 24 Jul 2003:
3640 Fixes for cmd_nand.c:
3641 - Fixed null dereferece which could result in incorrect ECC values.
3642 - Added support for devices with no Ready/Busy signal hooked up.
3643 - Added OMAP1510 read/write protect handling.
3644 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3645 for non-JFFS2.
3646 - Switched default ECC to be JFFS2.
3647
wdenk77846742003-07-26 08:08:08 +00003648* Allow crc32 to be used at address 0x000
3649
3650* Provide consistent interface to standalone applications to access
3651 the 'global_data' structure
3652 Provide a doc/README.standalone more useful to users/developers.
3653
3654* Make IceCube MGT5100 FEC driver work
3655
wdenk27b207f2003-07-24 23:38:38 +00003656* Implement new mechanism to export U-Boot's functions to standalone
3657 applications: instead of using (PPC-specific) system calls we now
3658 use a jump table; please see doc/README.standalone for details
3659
3660* Patch by Dave Westwood, 24 Jul 2003:
3661 added support for Unity OS (a proprietary OS)
3662
3663* Patch by Detlev Zundel, 23 Jul 2003:
3664 add "imls" command to print flash table of contents
3665
3666* Fix cold boot detection for log buffer reset
3667
3668* Return error for invalid length specifiers with "cp.X" etc.
3669
3670* Fix startup problem on MIPS
3671
3672* Allow for CONFIG_SPLASH_SCREEN even when no explicit
3673 bitmap support is configured
3674
3675* Patch by Bill Hargen, 18 Jul 2003:
3676 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3677
3678* Patch by Denis Peter, 18 Jul 2003:
3679 - fix memory configuration for MIP405T
3680 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3681
3682* Cleanup of TQM82xx configurations; use "official" board types
3683 to make selection easier.
3684
wdenk2535d602003-07-17 23:16:40 +00003685* Patch by Martin Krause, 17 Jul 2003:
3686 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3687
3688* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +00003689 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +00003690
3691* Patch by Nye Liu, 16 July 2003:
3692 MPC860FADS fixes:
3693 - add MPC86xADS support (uses MPC86xADS.h)
3694 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3695 o PLPRCR changes
3696 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3697 o don't trust gclk() software measurement by default, depend on
3698 CONFIG_8xx_GCLK_FREQ
3699 - add DRAM SIMM not installed detection
3700 - use more "correct" SDRAM initialization sequence
3701 - allow different SDRAM sizes (8xxADS has 8M)
3702 - default DER is 0
3703 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3704 - rename MAMR/MBMR defines to be more consistent. Should eventually
3705 be merged into MxMR to better reflect the PowerQUICC datasheet.
3706
3707* Patch by Yuli Barcohen, 16 Jul 2003:
3708 support new Motorola PQ2FADS-ZU evaluation board which replaced
3709 MPC8260ADS and MPC8266ADS
3710
3711======================================================================
wdenk945af8d2003-07-16 21:53:01 +00003712Changes for U-Boot 0.4.4:
3713======================================================================
3714
3715* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3716
3717* Add support for MGT5100 and MPC5200 processors
3718
3719* Patch by Lutz Dennig, 15 Jul 2003:
3720 update for R360MPI board
3721
3722======================================================================
wdenk8564acf2003-07-14 22:13:32 +00003723Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +00003724======================================================================
3725
wdenk2e5983d2003-07-15 20:04:06 +00003726* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +00003727 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +00003728 - added support for TI OMAP 1510 Innovator Board
3729
wdenk6dff5522003-07-15 07:45:49 +00003730* Patches by Martin Krause, 14 Jul 2003:
3731 - add I2C support for s3c2400 systems (trab board)
3732 - (re-) add "ping" to command table
3733
3734* Fix handling of "slow" POST routines
3735
wdenk8564acf2003-07-14 22:13:32 +00003736* Patches by Yuli Barcohen, 13 Jul 2003:
3737 - Correct flash and JFFS2 support for MPC8260ADS
3738 - fix PVR values and clock generation for PowerQUICC II family
3739 (8270/8275/8280)
3740
3741* Patch by Bernhard Kuhn, 08 Jul 2003:
3742 - add support for M68K targets
3743
3744* Patch by Ken Chou, 3 Jul:
3745 - Fix PCI config table for A3000
3746 - Fix iobase for natsemi.c
3747 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +00003748
wdenk8564acf2003-07-14 22:13:32 +00003749* Allow to enable "slow" POST routines by key press on power-on
3750* Fix temperature dependend switching of LCD backlight on LWMON
3751* Tweak output format for LWMON
3752
stroese57029232003-07-11 08:23:12 +00003753* Patch by Stefan Roese, 11 Jul 2003:
3754 - Fix bug in CONFIG_VERSION_VARIABLE.
3755 - AR405 config updated.
3756 - OCRTC/ORSG: bsp command added.
3757 - ASH405 bsp update.
3758
wdenk8564acf2003-07-14 22:13:32 +00003759======================================================================
3760Changes for U-Boot 0.4.2:
3761======================================================================
3762
wdenkf12e5682003-07-07 20:07:54 +00003763* Add support for NSCU board
3764
3765* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3766
3767* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3768 mirror bit flash on TQM8xxM modules
3769
wdenk0d498392003-07-01 21:06:45 +00003770* Patch by Kenneth Johansson, 30 Jun 2003:
3771 get rid of MK_CMD_ENTRY macro; update doc/README.command
3772
wdenkb37c7e52003-06-30 16:24:52 +00003773* Patch by Seb James, 30 Jun 2003:
3774 Improve documentation of I2C configuration in README
3775
3776* Fix problems with previous log buffer "fixes"
3777
3778* Fix minor help text issues
3779
3780* "log append" did not append a newline
3781
3782======================================================================
wdenkb0fce992003-06-29 21:03:46 +00003783Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +00003784======================================================================
3785
wdenkb0fce992003-06-29 21:03:46 +00003786* Fix some missing commands, cleanup header files
3787 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3788
wdenk9d2b18a2003-06-28 23:11:04 +00003789* Rewrite command lookup and help command (fix problems with bubble
3790 sort when sorting command name list). Minor cleanup here and there.
3791
wdenkd1cbe852003-06-28 17:24:46 +00003792* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3793 - Allow to call sysmon function interactively
3794 - PIC on LWMON board needs delay after power-on
3795 - Add missing RSR definitions for MPC8xx
3796 - Improve log buffer handling: guarantee clean reset after power-on
wdenk149dded2003-09-10 18:20:28 +00003797 - Add support for EXBITGEN board (aka "genie")
wdenkd1cbe852003-06-28 17:24:46 +00003798 - Add support for SL8245 board
3799
wdenk8bde7f72003-06-27 21:31:46 +00003800* Code cleanup:
3801 - remove trailing white space, trailing empty lines, C++ comments, etc.
3802 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3803
3804* Patches by Kenneth Johansson, 25 Jun 2003:
3805 - major rework of command structure
3806 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3807
3808======================================================================
3809Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +00003810======================================================================
3811
wdenk993cad92003-06-26 22:04:09 +00003812* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +00003813 - csb226 configuration updated
3814 - credits for logodl port updated
3815 - innokom configuration updated
3816 - logodl tree update, still with coding style inconsistencies
3817 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +00003818
3819* Patch by Pantelis Antoniou, 25 Jun 2003:
3820 update NetVia with V2 board support
3821
wdenkb783eda2003-06-25 22:26:29 +00003822* Header file cleanup for ARM
3823
3824* Patch by Murray Jensen, 24 Jun 2003:
3825 - make sure to use only U-boot provided header files
3826 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3827
stroesea300d832003-06-24 14:32:24 +00003828* Patch by Stefan Roese, 24 Jun 2003:
3829 - Update esd ASH405 board files.
3830 - Update esd DASA_SIM config file.
3831 - Add ping command to some esd boards.
3832
wdenkcceb8712003-06-23 18:12:28 +00003833* Patch by Yuli Barcohen, 23 Jun 2003:
3834 Update for MPC8260ADS board
3835
3836* Patch by Murray Jensen, 23 Jun 2003:
3837 - cleanup of GCC 3.x compiler warnings
3838
wdenk3595ac42003-06-22 17:18:28 +00003839* Patch by Rune Torgersen, 4 Jun 2003:
3840 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +00003841
wdenk3595ac42003-06-22 17:18:28 +00003842* Patch by Richard Woodruff, 19 June 03:
3843 - Enabled standard u-boot device abstraction for ARM
3844 - Enabled console device for ARM
3845 - Initilized bi_baudrate for ARM
3846
3847* Patch by Bill Hargen, 23 Apr 2003:
3848 fix byte order for 824x I2C addresses (write op)
3849
wdenk592c5ca2003-06-21 00:17:24 +00003850* Patch by Murray Jensen, 20 Jun 2003:
3851 - hymod update
3852 - cleanup (especially for gcc-3.x compilers)
3853
wdenk72755c72003-06-20 23:10:58 +00003854* Patch by Tom Guilliams, 20 Jun 2003:
3855 added CONFIG_750FX support for IBM 750FX processors
3856
wdenk03329902003-06-20 22:36:30 +00003857* Patch by Devin Crumb, 02 Apr 2003:
3858 Fix clock divider rounding problem in drivers/serial.c
3859
3860* Patch by Richard Woodruff, 19 June 03:
3861 - Fixed smc91c111 driver to sync with the u-boot environment
3862 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +00003863 - Added eth_init error return check in NetLoop (net/net.c).
3864
wdenk03329902003-06-20 22:36:30 +00003865* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +00003866 Added support for A3000 SBC board (Artis Microsystems Inc.)
3867
wdenk6dd652f2003-06-19 23:40:20 +00003868* Patches by Murray Jensen, 17 Jun 2003:
3869 - Hymod board database mods: add "who" field and new xilinx chip types
3870 - provide new "init_cmd_timeout()" function so code external to
3871 "common/main.c" can use the "reset_cmd_timeout()" function before
3872 entering the main loop
3873 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3874 slightly different. see include/configs/hymod.h for an example
3875 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3876 CFG_DTT_ADM1021 defined)
3877 - add new "eeprom_probe()" function which has similar args and
3878 behaves in a similar way to "eeprom_read()" etc.
3879 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3880 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3881 - gdbtools copyright update
3882 - ensure that set_msr() executes the "sync" and "isync" instructions
3883 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3884 - 8260 I/O ports fix: Open Drain should be set last when configuring
3885 - add SIU IRQ defines for 8260
3886 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3887 config.mk to allow board configurations to override the GNU
3888 linker script, selected via the LDSCRIPT, make variable, and to
3889 give an initial value to the OBJCFLAGS make variable
3890 - 8260 i2c enhancement:
3891 o correctly extends the timeout depending on the size of all
3892 queued messages for both transmit and receive
3893 o will not continue with receive if transmit times out
3894 o ensures that the error callback is done for all queued tx
3895 and rx messages
3896 o correctly detects both tx and rx timeouts, only delivers one to
3897 the callback, and does not overwrite an earlier error
3898 o logic in i2c_probe now correct
3899 - add "vprintf()" function so that "panic()" function can be
3900 technically correct
3901 - many Hymod board changes
3902
wdenk52f52c12003-06-19 23:04:19 +00003903* Patches by Robert Schwebel, 14 Jun 2003:
3904 - add support for Logotronic DL datalogger board
3905 - cleanup serial line after kermit binary download
3906 - add debugX macro (debug level support)
3907 - update mach-types.h to latest arm.linux.org.uk master list.
3908
wdenk48b42612003-06-19 23:01:32 +00003909* Patches by David Müller, 12 Jun 2003:
3910 - rewrite of the S3C24X0 register definitions stuff
3911 - "driver" for the built-in S3C24X0 RTC
3912
3913* Patches by Yuli Barcohen, 12 Jun 2003:
3914 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3915 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3916 configuration word supplied by FPGA on some MPC8260ADS boards
3917
3918* Patch by Pantelis Antoniou, 10 Jun 2003:
3919 Unify status LED interface
3920
wdenk15ef8a52003-06-18 20:22:24 +00003921* Add support for DS12887 RTC; add RTC support for ATC board
3922
wdenk2abbe072003-06-16 23:50:08 +00003923* Patch by Nicolas Lacressonniere, 11 Jun 2003:
3924 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3925 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +00003926 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +00003927 - Add Flash detection on Atmel AT91RM9200DK
3928 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3929 - Replace old Ethernet PHY layer functions
3930 - Change link address
3931
3932* Patch by Frank Smith, 9 Jun 2003:
3933 use CRIT_EXCEPTION for machine check on 4xx
3934
3935* Patch by Detlev Zundel, 13 Jun 2003:
3936 added implementation of the "carinfo" command in cmd_immap.c
3937
wdenk71f95112003-06-15 22:40:42 +00003938* Fix CONFIG_NET_MULTI support in include/net.h
3939
3940* Patches by Kyle Harris, 13 Mar 2003:
3941 - Add FAT partition support
3942 - Add command support for FAT
3943 - Add command support for MMC
3944 ----
3945 - Add Intel PXA support for video
3946 - Add Intel PXA support for MMC
3947 ----
3948 - Enable MMC and FAT for lubbock board
3949 - Other misc changes for lubbock board
3950
wdenk487778b2003-06-06 11:20:01 +00003951* Patch by Robert Schwebel, April 02, 2003:
3952 fix for SMSC91111 driver
3953
wdenka3ed3992003-06-05 19:37:36 +00003954* Patch by Vladimir Gurevich, 04 Jun 2003:
3955 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3956
stroese08eaea92003-06-05 15:44:37 +00003957* Patch by Stefan Roese, 05 Jun 2003:
3958 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3959 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3960 data cache can be used even if the chip select is in use.
3961 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3962 (see README for further description).
3963 - Changed config files of CONFIG_EEPRO100 boards to use the
3964 CFG_RX_ETH_BUFFER define.
3965
wdenk73a8b272003-06-05 19:27:42 +00003966* Add support for RMU board
3967
3968* Add support for TQM862L at 100/50 MHz
3969
3970* Patch by Pantelis Antoniou, 02 Jun 2003:
3971 major reconstruction of networking code;
3972 add "ping" support (outgoing only!)
3973
wdenkf3e0de62003-06-04 15:05:30 +00003974* Patch by Denis Peter, 04 June 2003:
3975 add support for the MIP405T board
3976
wdenk682011f2003-06-03 23:54:09 +00003977* Patches by Udi Finkelstein, 2 June 2003:
3978 - Added support for custom keyboards, initialized by defining a
3979 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3980 - Added support for the RBC823 board.
3981 - cpu/mpc8xx/lcd.c now automatically calculates the
3982 Horizontal Pixel Count field.
3983
3984* Fix alignment problem in BOOTP (dhcp_leasetime option)
3985 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3986
3987* Patch by Mark Rakes, 14 May 2003:
3988 add support for Intel e1000 gig cards.
3989
3990* Patch by Nye Liu, 3 Jun 2003:
3991 fix critical typo in MAMR definition (include/mpc8xx.h)
3992
3993* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
3994
3995* Patch by Klaus Heydeck, 2 Jun 2003
3996 Minor changes for KUP4K configuration
3997
wdenk7a8e9bed2003-05-31 18:35:21 +00003998* Patch by Marc Singer, 29 May 2003:
3999 Fixed rarp boot method for IA32 and other little-endian CPUs.
4000
4001* Patch by Marc Singer, 28 May 2003:
4002 Added port I/O commands.
4003
4004* Patch by Matthew McClintock, 28 May 2003
4005 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
4006 - minor patches for utx8245
4007
4008* Patch by Daniel Engström, 28 May 2003:
4009 x86 update
4010
4011* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
4012 add nand flash support to SXNI855T configuration
4013 fix/extend nand flash support:
4014 - fix 'nand erase' command so does not erase bad blocks
4015 - fix 'nand write' command so does not write to bad blocks
4016 - fix nand_probe() so handles no flash detected properly
4017 - add doc/README.nand
4018 - add .jffs2 and .oob options to nand read/write
4019 - add 'nand bad' command to list bad blocks
4020 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
4021 - make NAND read/write faster
4022
4023* Patch by Rune Torgersen, 23 May 2003:
4024 Update for MPC8266ADS board
4025
wdenk3b57fe02003-05-30 12:48:29 +00004026* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
4027 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
4028 _time_ (!) if the environment is embedded within the U-Boot image,
4029 or in a separate flash sector.
4030
4031* Cleanup CFG_DER #defines in config files (wd maintained only)
4032
wdenkf07771c2003-05-28 08:06:31 +00004033* Fix data abort exception handling for arm920t CPU
4034
4035* Fix alignment problems with flash driver for TRAB board
4036
4037* Patch by Donald White, 21 May 2003:
4038 fix calculation of base address in pci_hose_config_device()
4039
4040* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
4041 execute "cmd2", even if "cmd1" fails. Note that this is different
4042 to "run var1 var2" where the contents of "var2" will NOT be
4043 executed when a command in "var1" fails.
4044
wdenk38b99262003-05-23 23:18:21 +00004045* Add zero-copy ramdisk support (requires corresponding kernel support!)
4046
wdenk4c3b21a2003-05-23 12:36:20 +00004047* Patch by Kyle Harris, 20 May 2003:
4048 In preparation for an ixp port, rename cpu/xscale and arch-xscale
4049 into cpu/pxa and arch-pxa.
4050
stroesed9ff6e82003-05-23 11:49:24 +00004051* Patch by Stefan Roese, 23 May 2003:
4052 - IBM PPC405EP port added.
4053 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
4054 UART0) is used as default U-Boot console. PPC4xx only!
4055 - esd ASH405 board added (PPC405EP based).
4056 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
4057 - esd CPCI405AB board added.
4058 - esd PMC405 board added.
4059 - Update of some esd boards.
4060
wdenk33149b82003-05-23 11:38:58 +00004061* Patch by Denis Peter, 19 Mai 2003:
4062 add support for the MIP405-3 board
4063
wdenk5d232d02003-05-22 22:52:13 +00004064* Patch by Dave Ellis, 22 May 2003:
4065 Fix problem with only partially cleared .bss segment
4066
4067* Patch by Rune Torgersen, 12 May 2003:
4068 get PCI to work on a MPC8266ADS board; incorporate change to
4069 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
4070
4071* Patch by Nye Liu, 1 May 2003:
4072 minor patches for the FADS8xx
4073
4074* Patch by Thomas Schäfer, 28 Apr 2003:
4075 Fix SPD handling for 256 ECC DIMM on Walnut
4076
wdenkc8c3a8b2003-05-21 20:26:20 +00004077* Add support for arbitrary bitmaps for TRAB's VFD command;
4078 allow to pass boot bitmap addresses in environment variables;
4079 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +00004080
4081* Patch by Christian Geißinger, 19 May 2002:
4082 On TRAB: wait until the dummy byte has been completely sent
4083
wdenk7f70e852003-05-20 14:25:27 +00004084* Patch by David Updegraff, 22 Apr 2003:
4085 update for CrayL1 board
4086
4087* Patch by Pantelis Antoniou, 21 Apr 2003:
4088 add boot support for ARTOS (a proprietary OS)
4089
4090* Patch by Steven Scholz, 11 Apr 2003:
4091 Add support for RTC DS1338
4092
4093* Patch by Rod Boyce, 24 Jan 2003:
4094 Fix counting of extended partitions in diskboot command
4095
wdenk59de2ed2003-05-20 10:58:04 +00004096* Patch by Christophe Lindheimer, 20 May 2003:
4097 allow the use of CFG_LOADS when CFG_NO_FLASH is set
4098
wdenk86d82762003-05-20 10:39:44 +00004099* Fix SDRAM timing on Purple board
4100
wdenk66fd3d12003-05-18 11:30:09 +00004101* Add support for CompactFlash on ATC board
4102 (includes support for Intel 82365 and compatible PC Card controllers,
4103 and Yenta-compatible PCI-to-CardBus controllers)
4104
wdenk45219c42003-05-12 21:50:16 +00004105* Patch by Mathijs Haarman, 08 May 2003:
4106 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
4107
wdenk9c62cc52003-05-03 23:33:47 +00004108* Fix problem with usage of "true" (undefined in current versions of bfd.h)
4109
wdenk7aa78612003-05-03 15:50:43 +00004110* Add support for Promess ATC board
4111
4112* Patch by Keith Outwater, 28 Apr 2003:
4113 - Miscellaneous corrections and additions to GEN860T board specific code.
4114 - Added GEN860_SC variant to GEN860T.
4115 - Miscellaneous corrections to GEN860T documentation.
4116 - Correct duplicate entry in U-Boot CREDITS file.
4117 - Add GEN860T_SC entry in MAINTAINERS file.
4118 - Update CREDITS file with GEN860T_SC info.
4119
4120* Update Smiths Aerospace addresses in MAINTAINERS file
4121
4122* Fix error handling in hush's version of "run" command
4123
wdenk4532cb62003-04-27 22:52:51 +00004124* LWMON extensions:
4125 - Splashscreen support
4126 - modem support
4127 - sysmon support
4128 - temperature dependend enabling of LCD
4129
4130* Allow booting from old "PPCBoot" disk partitions
4131
4132* Add support for TQM8255 Board / MPC8255 CPU
4133
4134======================================================================
wdenk02c9bed2003-04-20 17:41:25 +00004135Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +00004136======================================================================
4137
wdenkd791b1d2003-04-20 14:04:18 +00004138* Make sure Block Lock Bits get cleared in R360MPI flash driver
4139
4140* MPC823 LCD driver: Fill color map backwards, to allow for steady
4141 display when Linux takes over
4142
4143* Patch by Erwin Rol, 27 Feb 2003:
4144 Add support for RTEMS (this time for real).
4145
4146* Add support for "bmp info" and "bmp display" commands to load
4147 bitmap images; this can be used (for example in a "preboot"
4148 command) to display a splash screen very quickly after poweron.
4149
4150* Add support for 133 MHz clock on INCA-IP board
4151
wdenk4a6fd342003-04-12 23:38:12 +00004152* Patch by Lutz Dennig, 10 Apr 2003:
4153 Update for R360MPI board
4154
4155* Add new meaning to "autostart" environment variable:
4156 If set to "no", a standalone image passed to the
4157 "bootm" command will be copied to the load address
4158 (and eventually uncompressed), but NOT be started.
4159 This can be used to load and uncompress arbitrary
4160 data.
4161
stroese69f8f8272003-04-10 13:30:28 +00004162* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +00004163 Changed DHCP client to use IP address from server option field #54
4164 from the OFFER packet in the server option field #54 in the REQUEST
4165 packet. This fixes a problem using a Windows 2000 DHCP server,
4166 where the DHCP-server is not the TFTP-server.
4167
4168* Set max brightness for MN11236 displays on TRAB board
stroese69f8f8272003-04-10 13:30:28 +00004169
wdenkd126bfb2003-04-10 11:18:18 +00004170* Add support for TQM862L modules
4171
4172======================================================================
wdenk60fbe252003-04-08 23:25:21 +00004173Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +00004174======================================================================
4175
wdenk3e386912003-04-05 00:53:31 +00004176* Patch by Arun Dharankar, 4 Apr 2003:
4177 Add IDMA example code (tested on 8260 only)
4178
4179* Add support for Purple Board (MIPS64 5Kc)
4180
4181* Add support for MIPS64 5Kc CPUs
4182
4183* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
4184
4185* Patch by Denis Peter, 04 Apr 2003:
4186 - update MIP405-4 board
4187
stroese36c05a82003-04-04 16:55:30 +00004188* Patch by Stefan Roese, 4 Apr 2003:
4189 - U-Boot version environment variable "ver" added
4190 (CONFIG_VERSION_VARIABLE).
4191 - Changed PPC405GPr version from A to B.
4192 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
4193
wdenk3e386912003-04-05 00:53:31 +00004194* Patches by Denis Peter, 03 April 2003:
4195 - fix PCI IRQs on MPL boards
4196 - fix two more un-relocated pointer problems
4197
4198* Fix behaviour of "run" command:
4199 - print error message iv variable does not exist
4200 - terminate processing of arguments in case of error
4201
4202* Patches by Peter Figuli, 10 Mar 2003
4203 - Add support for BTUART on PXA platform
4204 - Add support for WEP EP250 (PXA) board
4205
4206* Fix flash problems on INCA-IP; add tool to allow bruning images to
4207 flash using a BDI2000
4208
4209* Implement fix for I2C Edge Conditions problem for all boards that
4210 use the bit-banging driver (common/soft_i2c.c)
4211
wdenk0db5bca2003-03-31 17:27:09 +00004212* Patch by Martin Winistoerfer, 23 Mar 2003
4213 - Add port to MPC555/556 microcontrollers
4214 - Add support for cmi customer board with
4215 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
4216
4217* Patch by Rick Bronson, 28 Mar 2003:
4218 - fix common/cmd_nand.c
4219
wdenk85ec0bc2003-03-31 16:34:49 +00004220* Patch by Arun Dharankar, 24 Mar 2003:
4221 - add threads / scheduler example code
4222
4223* Add patches by Robert Schwebel, 31 Mar 2003:
4224 - add ctrl-c support for kermit download
4225 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +00004226 - csb226 board: bring in sync with innokom/memsetup.S
4227 - csb226 board: fix MDREFR handling
4228 - misc doc fixes / extensions
4229 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
4230 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +00004231
stroese36c05a82003-04-04 16:55:30 +00004232* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +00004233
wdenk506f0442003-03-28 14:40:36 +00004234* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
4235 - fix SRAM and SDRAM memory sizing
4236 - add status LED support
4237 - add MAC address for second (SCC1) ethernet port
4238
4239* Update default environment for TQM8260 board
4240
wdenkdc7c9a12003-03-26 06:55:25 +00004241* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +00004242 - Add NAND flash support for reading, writing, and erasing NAND
4243 flash (certain forms of which are called SmartMedia).
4244 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +00004245
4246* Patches by Robert Schwebel, 19 Mar 2003:
4247 - use arm-linux-gcc as default compiler for ARM
4248 - fix i2c fixup code
4249 - fix missing baudrate setting
4250 - added $loadaddr / CFG_LOAD_ADDR support to loadb
4251 - moved "ignoring trailing characters" _before_ u-boot wants to
4252 print out diagnostics messages; removes bogus characters at the
4253 end of transmission
4254
4255* Patch by John Zhan, 18 Mar 2003:
4256 Add support for SinoVee Microsystems SC8xx boards
4257
4258* Patch by Rolf Offermanns, 21 Mar 2003:
4259 ported the dnp1110 related changes from the current armboot cvs to
4260 current u-boot cvs. smc91111 does not work. problem marked in
4261 smc91111.c, grep for "FIXME".
4262
4263* Patch by Brian Auld, 25 Mar 2003:
4264 Add support for STM flash chips on ebony board
4265
wdenk4d75a502003-03-25 16:50:56 +00004266* Add PCI support for MPC8250 Boards (PM825 module)
4267
stroese44e5c5c2003-03-25 14:44:48 +00004268* Patch by Stefan Roese, 25 Mar 2003:
4269 - PCI405 update.
4270
stroese5d5d44e2003-03-20 15:32:59 +00004271* Patch by Stefan Roese, 20 Mar 2003:
4272 - CPCI4052 update (support for revision 3).
4273 - Set edge conditioning circuitry on PPC405GPr for compatibility
4274 to existing PPC405GP designs.
4275 - Clip udiv to 5 bits on PPC405 (serial.c).
4276
wdenkc0218802003-03-27 12:09:35 +00004277* Extend INCAIP board support:
4278 - add automatic RAM size detection
4279 - add "bdinfo" command
4280 - pass flash address and size to Linux kernel
4281 - switch to 150 MHz clock
4282
wdenk06d01db2003-03-14 20:47:52 +00004283* Avoid flicker on the TRAB's VFD by synchronizing the enable with
4284 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
4285 boards, version 153 for Rev. 200 boards).
4286
4287* Patch by Vladimir Gurevich, 12 Mar 2003:
4288 Fix relocation problem of statically initialized string pointers
4289 in common/cmd_pci.c
4290
4291* Patch by Kai-Uwe Blöm, 12 Mar 2003:
4292 Cleanup & bug fixes for JFFS2 code:
4293 - the memory mangement was broken. It caused havoc on malloc by
4294 writing beyond the block boundaries.
4295 - the length calculation for files was wrong, sometimes resulting
4296 in short file reads.
4297 - data copying now optionally takes fragment version numbers into
4298 account, to avoid copying from older data.
4299 See doc/README.JFFS2 for details.
4300
wdenk3bac3512003-03-12 10:41:04 +00004301* Patch by Josef Wagner, 12 Mar 2003:
4302 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
4303 - ETH05 and BEDBUG support for CU824
4304 - added support for MicroSys CPC45
4305 - new BOOTROM/FLASH0 and DOC base for PM826
4306
4307* Patch by Robert Schwebel, 12 Mar 2003:
4308 Fix the chpart command on innokom board
4309
4310* Name cleanup:
4311 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
4312 s/PPCBoot/U-Boot/ in some files
4313 s/pImage/uImage/ in some files
4314
4315* Patch by Detlev Zundel, 15 Jan 2003:
4316 Fix '' command line quoting
4317
4318* Patch by The LEOX team, 19 Jan 2003:
4319 - add support for the ELPT860 board
4320 - add support for Dallas ds164x RTC
4321
wdenk1cb8e982003-03-06 21:55:29 +00004322* Patches by David Müller, 31 Jan 2003:
4323 - minimal setup for CardBus bridges
4324 - add EEPROM read/write support in the CS8900 driver
4325 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +00004326 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +00004327
4328* Patch by Steven Scholz, 04 Feb 2003:
4329 add support for RTC DS1307
4330
4331* Patch by Reinhard Meyer, 5 Feb 2003:
4332 fix PLPRCR/SCCR init sequence on 8xx to allow for
4333 changes of EBDF by software
4334
4335* Patch by Vladimir Gurevich, 07 Feb 2003:
4336 "API-compatibility patch" for 4xx I2C driver
4337
4338* TRAB fixes / extensions:
4339 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +00004340 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +00004341 - make sure both buzzers are turned off (drive low level)
4342
wdenk47cd00f2003-03-06 13:39:27 +00004343* Patches by Robert Schwebel, 06 Mar 2003:
4344 - fix bug in BOOTP code (must use NetCopyIP)
4345 - update of CSB226 port
4346 - clear BSS segment on XScale
4347 - added support for i2c_init_board() function
4348 - update to the Innokom plattform
4349
4350* Extend support for redundand environments for configurations where
4351 environment size < sector size
4352
wdenkdb2f721f2003-03-06 00:58:30 +00004353* Patch by Rune Torgersen, 13 Feb 2003:
4354 Add support for Motorola MPC8266ADS board
4355
4356* Patch by Kyle Harris, 19 Feb 2003:
4357 patches for the Intel lubbock board:
4358 memsetup.S - general cleanup (based on Robert's csb226 code)
4359 flash.c - overhaul, actually works now
4360 lubbock.c - fix init funcs to return proper value
4361
4362* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +00004363 - Fixed off by one in RFTA calculation.
wdenkdb2f721f2003-03-06 00:58:30 +00004364 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +00004365 minimum timing so clamp it to what we can do.
wdenkdb2f721f2003-03-06 00:58:30 +00004366 - Takes function pointer to function for reading the spd_nvram. Usefull
4367 for faking data or hardcode a module without the nvram.
4368 - fix other user for above change
4369 - fix some comments.
4370
4371* Patches by Brian Waite, 26 Feb 2003:
4372 - fix port for evb64260 board
4373 - fix PCI for evb64260 board
4374 - fix PCI scan
4375
4376* Patch by Reinhard Meyer, 1 Mar 2003:
4377 Add support for EMK TOP860 Module
4378
4379* Patch by Yuli Barcohen, 02 Mar 2003:
4380 Add SPD EEPROM support for MPC8260ADS board
4381
wdenk43d96162003-03-06 00:02:04 +00004382* Patch by Robert Schwebel, 21 Jan 2003:
4383 - Add support for Innokom board
4384 - Don't complain if "install" fails
4385 - README cleanup (remove duplicated lines)
4386 - Update PXA header files
4387
4388* Add documentation for existing POST code (doc/README.POST)
4389
4390* Patch by Laudney Ren, 15 Jan 2003:
4391 Fix handling of redundand environment in "tools/envcrc.c"
4392
4393* Patch by Detlev Zundel, 28 Feb 2003:
4394 Add bedbug support for 824x systems
4395
4396* Add support for 16 MB flash configuration of TRAB board
4397
4398* Patch by Erwin Rol, 27 Feb 2003:
4399 Add support for RTEMS
4400
4401* Add image information to README
4402
stroese2a9e02e2003-02-18 11:30:24 +00004403* Patch by Stefan Roese, 18 Feb 2003:
4404 CPCIISER4 configuration updated.
4405
stroesed7787c62003-02-17 16:06:06 +00004406* Patch by Stefan Roese, 17 Feb 2003:
4407 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4408
stroesead10dd92003-02-14 11:21:23 +00004409* Patch by Stefan Roese, 13 Feb 2003:
4410 Add "pcidelay" environment variable (in ms, enabled via
4411 CONFIG_PCI_BOOTDELAY).
4412 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4413 RST# to respond to configuration cycles (33MHz -> 1s).
4414
wdenk43d96162003-03-06 00:02:04 +00004415* Fix dual PCMCIA slot support (when running with just one
4416 slot populated)
4417
4418* Add VFD type detection to trab board
4419
4420* extend drivers/cs8900.c driver to synchronize ethaddr environment
4421 variable with value in the EEPROM
4422
stroeseee1b3b52003-02-10 16:39:00 +00004423* Patch by Stefan Roese, 10 Feb 2003:
4424 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4425
wdenkc0218802003-03-27 12:09:35 +00004426* Add support for MIPS32 4Kc CPUs
4427
4428* Add support for INCA-IP Board
4429
wdenk43d96162003-03-06 00:02:04 +00004430======================================================================
4431Changes for U-Boot 0.2.2:
4432======================================================================
4433
wdenkaacf9a42003-01-17 16:27:01 +00004434* Add dual ethernet support on PM826
4435
4436* Add support for LXT971 PHY on PM826
4437
4438* Patch by Tord Andersson, 16 Jan 2003:
4439 Fix flash sector count for TQM8xxL
4440
4441* Fix I2C EEPROM problem on ICU862 board (would only write the first
4442 16 bytes out of each 32 byte block)
4443
4444======================================================================
4445Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +00004446======================================================================
4447
wdenk608c9142003-01-13 23:54:46 +00004448* Add support for V37 board
4449 (patch by Jón Benediktsson, 11 Dec 2002)
4450
wdenkd0fb80c2003-01-11 09:48:40 +00004451* Update baudrate in bd_info when it gets changed
4452
4453* Add watchdog trigger points while waiting for serial port
4454 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4455
4456* Improve command line tool to access the U-Boot's environment
4457 (figuration of the utility, using a config file)
4458
wdenka25f8622003-01-02 23:57:29 +00004459* Add single quote support for (old) command line parser
4460
wdenk288b3d72002-12-20 23:42:25 +00004461* Switch LWMON board default config from FRAM to EEPROM;
4462 in POST, EEPROM shows up on 8 addresses
4463
4464======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +00004465Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00004466======================================================================
4467
wdenk6aff3112002-12-17 01:51:00 +00004468* Use 1-byte-read instead of -write for iprobe() function
4469 Add i2c commands to PM826 config
4470
4471* extend I2C POST code: check for list on known addresses
4472
wdenk228f29a2002-12-08 09:53:23 +00004473* Improve log buffer code; use "loglevel" to decide which messages
4474 to log on the console, too (like in Linux); get rid of "logstart"
4475
4476* Add command line tool to access the U-Boot's environment
4477 (board-specific for TRAB now, to be fixed later)
4478
wdenk7c7a23b2002-12-07 00:20:59 +00004479* Patch by Hans-Joerg Frieden, 06 Dec 2002
4480 Fix misc problems with AmigaOne support
4481
4482* Patch by Chris Hallinan, 3 Dec 2002:
4483 minor cleanup to the MPC8245 EPIC driver
4484
4485* Patch by Pierre Aubert , 28 Nov 2002
4486 Add support for external (SIU) interrupts on MPC8xx
4487
4488* Patch by Pierre Aubert , 28 Nov 2002
4489 Fix nested syscalls bug in standalone applications
4490
4491* Patch by David Müller, 27 Nov 2002:
4492 fix output of "pciinfo" command for CardBus bridge devices.
4493
4494* Fix bug in TQM8260 board detection - boards got stuck when board ID
4495 was not readable
4496
wdenk1f53a412002-12-04 23:39:58 +00004497* Add LED indication for IDE activity on KUP4K board
4498
wdenka6c7ad22002-12-03 21:28:10 +00004499* Fix startup problems with VFD display on TRAB
4500
4501* Patch by Pierre Aubert, 20 Nov 2002
4502 Add driver for Epson SED13806 graphic controller.
4503 Add support for BMP logos in cfb_console driver.
4504
wdenkea909b72002-11-21 23:11:29 +00004505* Added support for both PCMCIA slots (at the same time!) on MPC8xx
4506
4507* Patch by Rod Boyce, 21 Nov 2002:
4508 fix PCMCIA on MBX8xx board
4509
4510* Patch by Pierre Aubert , 21 Nov 2002
4511 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4512 bootmode word in DPRAM configurable
4513
wdenkb2184c32002-11-19 23:01:07 +00004514* Patch by Daniel Engström, 18 Nov 2002:
4515 Fixes for x86 port (mostly strings issues)
4516
4517* Patch by Ken Chou, 18 Nov 2002:
4518 Fix for natsemi NIC cards (DP83815)
4519
4520* Patch by Pierre Aubert, 19 Nov 2002:
4521 fix a bug for the MII configuration, and some warnings
4522
wdenkc7de8292002-11-19 11:04:11 +00004523* Patch by Thomas Frieden, 13 Nov 2002:
4524 Add code for AmigaOne board
4525 (preliminary merge to U-Boot, still WIP)
4526
4527* Patch by Jon Diekema, 12 Nov 2002:
4528 - Adding URL for IEEE OUI lookup
4529 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4530 being defined.
4531 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4532 root-on-nfs macros are designed to switch how the default boot
4533 method gets defined.
4534
wdenk2262cfe2002-11-18 00:14:45 +00004535* Patch by Daniel Engström, 13 Nov 2002:
4536 Add support for i386 architecture and AMD SC520 board
4537
4538* Patch by Pierre Aubert, 12 Nov 2002:
4539 Add support for DOS filesystem and booting from DOS floppy disk
4540
wdenk1d0350e2002-11-11 21:14:20 +00004541* Patch by Jim Sandoz, 07 Nov 2002:
4542 Increase number of network RX buffers (PKTBUFSRX in
4543 "include/net.h") for EEPRO100 based boards (especially SP8240)
4544 which showed "Receiver is not ready" errors when U-Boot was
4545 processing the receive buffers slower than the network controller
4546 was filling them.
4547
wdenkeb9401e2002-11-11 02:11:37 +00004548* Patch by Andreas Oberritter, 09 Nov 2002:
4549 Change behaviour of NetLoop(): return -1 for errors, filesize
4550 otherwise; return code 0 is valid an means no file loaded - in this
4551 case the environment still gets updated!
4552
4553* Patches by Jon Diekema, 9 Nov 2002:
4554 - improve ADC/DAC clocking on the SACSng board to align
4555 the failing edges of LRCLK and SCLK
4556 - sbc8260 configuration tweaks
4557 - add status LED support for 82xx systems
4558 - wire sspi/sspo commands into command handler; improved error
4559 handlering
4560 - add timestamp support and alternate memory test to the
4561 SACSng configuration
4562
4563* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +00004564 Add "-n" to linker options to get rid of "Not enough room for
4565 program headers" problem
4566
4567* Patch by David Müller, 05 Nov 2002
4568 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4569 so we can use an already existing name
4570
4571* Patch by Pierre Aubert, 05 Nov 2002
4572 Hardware relatied improvments in FDC boot code
4573
4574* Patch by Holger Schurig, 5 Nov 2002:
4575 Make the PXA really change it's frequency
4576
4577* Patch by Pierre Aubert, 05 Nov 2002
4578 Add support for slave serial Spartan 2 FPGAs
4579
4580* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4581 drivers
4582
wdenk56f94be2002-11-05 16:35:14 +00004583* Add support for log buffer which can be passed to Linux kernel's
4584 syslog mechanism; used especially for POST results.
4585
4586* Patch by Klaus Heydeck, 31 Oct 2002:
4587 Add initial support for kup4k board
4588
wdenk384ae022002-11-05 00:17:55 +00004589* Patch by Robert Schwebel, 04 Nov 2002:
4590 - use watchdog to reset PXA250 systems
4591 - added progress callbacks to (some of the) ARM code
4592 - update for Cogent CSB226 board
4593
4594* Add support for FPS860 board
4595
wdenke95b61c2002-11-04 16:02:40 +00004596* Patch by Guillaume Alexandre,, 04 Nov 2002:
4597 Improve PCI access on 32-bits Compact PCI bus
4598
wdenk24ee89b2002-11-03 17:56:27 +00004599* Fix mdelay() on TRAB - this was still the debugging version with
4600 seconds instead of ms.
4601
4602* Patch by Robert Schwebel, 1 Nov 2002:
4603 XScale related cleanup (affects all ARM boards)
4604
4605* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00004606
4607======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00004608Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00004609======================================================================
4610
4611This is the initial version of "Das U-Boot", the Universal Boot Loader.
4612
4613It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4614For information about the history of the project please see the
4615PPCBoot project page at http://sourceforge.net/projects/ppcboot
4616
4617======================================================================