blob: 1468b3808778443a48835a70fb66d3ea0b376b31 [file] [log] [blame]
Wolfgang Denk5013c092008-03-02 22:45:33 +01001commit ffda586fc1373243c9794babde69500f6293a8d8
2Author: Li Yang <leoli@freescale.com>
3Date: Fri Feb 29 11:46:05 2008 +0800
4
5 add cscope build target
6
7 Add cscope build target to generate cscope database for code browsing.
8
9 Signed-off-by: Li Yang <leoli@freescale.com>
10
11commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
12Author: Kim Phillips <kim.phillips@freescale.com>
13Date: Wed Feb 27 15:06:39 2008 -0600
14
15 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
16
17 erratum 5.6 states the autoneg completion bit is functional only if the
18 autoneg bit is asserted.
19
20 This fixes any secondarily-issued networking commands on non-gigabit
21 links on the mpc8360 mds board.
22
23 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24
25commit 5f91db7f582ca17b1f19f10189c025696f333d2e
26Author: John Rigby <jrigby@freescale.com>
27Date: Tue Feb 26 09:38:14 2008 -0700
28
29 MPC5121e ADS PCI support take 3
30
31 Adds PCI support for MPC5121
32
33 Tested with drivers/net/rtl8139.c
34
35 Support is conditional since PCI on old silicon does not work.
36
37 ads5121_PCI_config turns on PCI
38
39 In this version, condition compilation of PCI code has been moved
40 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
41 suggested by Jean-Christophe PLAGNIOL-VILLARD
42
43 Signed-off-by: John Rigby <jrigby@freescale.com>
44
45commit 44b4dbed4133f657705b7c5193209da9978243a7
46Author: Anatolij Gustschin <agust@denx.de>
47Date: Mon Feb 25 23:53:07 2008 +0100
48
49 Fix warnings while compilation of post/drivers/memory.c
50
51 Fix warnings while compilation with new gcc in eldk-4.2
52
53 Signed-off-by: Anatolij Gustschin <agust@denx.de>
54
55commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
56Author: Anatolij Gustschin <agust@denx.de>
57Date: Mon Feb 25 20:54:04 2008 +0100
58
59 ppc4xx: Fix problem in 4xx_enet.c driver
60
61 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
62 enabled. To reproduce the problem ensure that 'ethrotate'
63 environment variable isn't set to "no" and then run
64 "tftp 200000 not_existent_file".
65 This patch tries to fix the issue.
66
67 Signed-off-by: Anatolij Gustschin <agust@denx.de>
68
69commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
70Author: Anatolij Gustschin <agust@denx.de>
71Date: Mon Feb 25 20:04:20 2008 +0100
72
73 POST: Disable cache while SPR POST
74
75 Currently (since commit b2e2142c) u-boot crashes on
76 sequoia board while SPR test if CONFIG_4xx_DCACHE is
77 enabled. This patch disables the cache while SPR test.
78
79 Signed-off-by: Anatolij Gustschin <agust@denx.de>
80
81commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
82Author: Martin Krause <martin.krause@tqs.de>
83Date: Mon Feb 25 17:52:40 2008 +0100
84
85 TQM5200: use automatic fdt memory fixup (part 2)
86
87 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
88 TB5200 and TB5200_B to fixup the /memory node with the memory values
89 detected by U-Boot.
90
91 Signed-off-by: Martin Krause <martin.krause@tqs.de>
92
93commit 44ceec253ea941b301abf4b079d52324def69d92
94Author: Martin Krause <martin.krause@tqs.de>
95Date: Mon Feb 25 15:17:05 2008 +0100
96
97 TQM5200: use automatic fdt memory fixup
98
99 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
100 TB5200 and TB5200_B to fixup the /memory node with the memory values
101 detected by U-Boot.
102
103 Signed-off-by: Martin Krause <martin.krause@tqs.de>
104
105commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
106Author: Martin Krause <martin.krause@tqs.de>
107Date: Mon Feb 25 13:27:52 2008 +0100
108
109 TQM5200: fix bug in SDRAM initialization code
110
111 This patch fixes a bug in the SDRAM initialization code for the
112 TQM5200. The hi_addr bit is now set correctly. Without this patch
113 the hi_addr bit is always set to 1, if the second SDRAM bank is
114 not populated.
115
116 For other MPC5200 boards a correspondig patch has already been applied
117 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
118
119 Signed-off-by: Martin Krause <martin.krause@tqs.de>
120 --
121 Forget the first patch please. I confused flash with SDRAM in
122 the comment ...
123
124commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
125Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
126Date: Mon Feb 25 00:03:12 2008 +0100
127
128 mx1fs2/flash: Fix multiple compiler warnings
129
130 "pointer targets in assignment differ in signedness"
131
132 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
133
134commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
135Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
136Date: Mon Feb 25 00:03:11 2008 +0100
137
138 arm-imx: Fix register definitions
139
140 Sync register definitions with linux
141
142 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
143
144commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
145Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
146Date: Mon Feb 25 00:03:10 2008 +0100
147
148 actua1/actua2/actua3: Fix multiple unused variable warnings
149
150 - actua1:
151 actux1.c: In function 'checkboard':
152 actux1.c:92: warning: unused variable 'revision'
153
154 - actua2:
155 actux2.c: In function 'checkboard':
156 actux2.c:100: warning: unused variable 's'
157 actux2.c:99: warning: unused variable 'revision'
158 actux2.c: In function 'reset_phy':
159 actux2.c:130: warning: unused variable 'i'
160
161 - actua3:
162 actux3.c: In function 'checkboard':
163 actux3.c:114: warning: unused variable 'revision'
164
165 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
166
167commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
168Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
169Date: Sun Feb 24 11:44:29 2008 +0900
170
171 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
172
173 The previous patch was lacking of i386, microblaze, nios and nios2. This
174 patch tries to fix them.
175
176 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
177
178commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
179Author: Kumar Gala <galak@kernel.crashing.org>
180Date: Wed Feb 27 16:30:47 2008 -0600
181
182 85xx: Don't icbi when unlocking the cache
183
184 There is no reason to icbi when invalidating the temporary stack in
185 the d-cache. Its impossible on e500 to have the i-cache contain
186 any addresses in the temp stack and it can be problematic in generating
187 transactions on the bus to non-valid addresses.
188
189 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
190
191commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
192Author: Andy Fleming <afleming@freescale.com>
193Date: Wed Feb 27 15:50:50 2008 -0600
194
195 Fix source for ECM error IVPR
196
197 The source vector for the ECM was being set to 2,
198 but that's what the source vector for DDR was being
199 set to. Change it to 1.
200
201 Signed-off-by: Andy Fleming <afleming@freescale.com>
202
203commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
204Author: Andy Fleming <afleming@freescale.com>
205Date: Wed Feb 27 14:29:58 2008 -0600
206
207 Invalidate INIT_RAM TLB mappings
208
209 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
210 mappings to be unguarded. This collided with an existing "bug"
211 where the mappings for the INIT_RAM were being kept around.
212 This meant that speculative loads to those addresses were
213 succeeding in the TLB, and going out to the bus, where they
214 were causing an exception (there's nothing at that address). The
215 Flash code was coincidentally causing such a speculative load.
216 Rather than go back to mapping the INIT RAM as guarded, we fix
217 it so that the entries for the INIT_RAM are invalidated. Thus
218 the speculative loads will fail in the TLB, and have no effect.
219
220 Signed-off-by: Andy Fleming <afleming@freescale.com>
221
222commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
223Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
224Date: Sun Feb 17 22:56:17 2008 +0100
225
226 sbc8548: Fix Revision reading and unused variable 'path'
227
228 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
229
230commit 495d162374c472f46454453553382ad0735dc725
231Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
232Date: Sun Feb 17 22:56:16 2008 +0100
233
234 sbc8548: Fix cfi flash bank declaration
235
236 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
237
238commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
239Author: Jon Loeliger <jdl@freescale.com>
240Date: Mon Feb 25 13:13:37 2008 -0600
241
242 86xx: Fix renamed GUR symbols in sbc8641d board.
243
244 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
245 (86xx: Fix GUR PCI config registers properly), we should have
246 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
247 symbols in the sbc8641d board as well. Fix this oversight.
248
249 Signed-off-by: Jon Loeliger <jdl@freescale.com>
250
251commit 64cd594e623c39f73964d18787763e4533f791f7
252Author: Stefan Roese <sr@denx.de>
253Date: Mon Feb 25 16:50:48 2008 +0100
254
255 ppc4xx: Fix acadia_nand build problem
256
257 Don't include testdram() on NAND-booting target acadia_nand. This saves
258 a few bytes and makes the target build clean again.
259
260 Signed-off-by: Stefan Roese <sr@denx.de>
261
262commit 14e099e698d41e8179d05c2b2dbcf704a236f748
263Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
264Date: Sun Feb 24 23:03:12 2008 +0000
265
266 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
267
268 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
269
270commit 724902c8464e610642b3a170278b99710325888e
271Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
272Date: Sun Feb 24 23:03:11 2008 +0000
273
274 arm-imx: Fix registers definition
275
276 Sync registers definition with linux
277
278 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
279
280commit 4cd288b589ea1178947c6e364453c32b3dede6b7
281Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
282Date: Sun Feb 24 23:03:10 2008 +0000
283
284 actua1/actua2/actua3: Fix multipleunused variable
285
286 - actua1:
287 actux1.c: In function 'checkboard':
288 actux1.c:92: warning: unused variable 'revision'
289
290 - actua2:
291 actux2.c: In function 'checkboard':
292 actux2.c:100: warning: unused variable 's'
293 actux2.c:99: warning: unused variable 'revision'
294 actux2.c: In function 'reset_phy':
295 actux2.c:130: warning: unused variable 'i'
296
297 - actua3:
298 actux3.c: In function 'checkboard':
299 actux3.c:114: warning: unused variable 'revision'
300
301 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
302
303commit b29661fc1151077776454288051bc9a488351ce8
304Author: Wolfgang Denk <wd@denx.de>
305Date: Sun Feb 24 15:21:36 2008 +0100
306
307 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
308
309 Signed-off-by: Wolfgang Denk <wd@denx.de>
310
Wolfgang Denkb29661f2008-02-24 15:21:36 +0100311commit 00b48a48424894daa589d166d73277830b1c6ac4
312Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
313Date: Sat Feb 23 12:15:56 2008 +0100
314
315 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
316
317 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
318
319commit b075d74efb70ff68c49a2532f26b56d6703b69c1
320Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
321Date: Sat Feb 23 17:24:16 2008 +0900
322
323 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
324
325 ----------------------------------------------------------------
326 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
327
328 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
329 32bit targets.
330
331 GCC can be made to warn about usage of long long types with ISO C90
332 (-ansi), but only with -pedantic. You can write this in a way that even
333 then it doesn't cause warnings, namely by:
334
335 #ifdef __GNUC__
336 __extension__ typedef __signed__ long long __s64;
337 __extension__ typedef unsigned long long __u64;
338 #endif
339
340 The __extension__ keyword in front of this switches off any pedantic
341 warnings for this expression.
342
343 Signed-off-by: Olaf Hering <olh@suse.de>
344 Cc: <linux-arch@vger.kernel.org>
345 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
346 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
347 ----------------------------------------------------------------
348
349 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
350
351commit 208acd112e6517b21fc30c420396902b103563ac
352Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
353Date: Sat Feb 23 17:07:57 2008 +0900
354
355 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
356
357 This will reduce the build time.
358
359 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
360
361commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
362Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
363Date: Sat Feb 23 17:05:00 2008 +0900
364
365 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
366
367 This will reduce the build time.
368
369 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
370
371commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
372Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
373Date: Sat Feb 23 16:58:41 2008 +0900
374
375 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
376
377 This reduces the build time by ~10%. Here's the gth2_config example.
378
379 BEFORE AFTER
380 real 0m31.441s 0m27.833s
381 user 0m24.766s 0m23.045s
382 sys 0m10.425s 0m7.468s
383
384 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
385
386commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
387Author: Marcel Moolenaar <marcelm@juniper.net>
388Date: Fri Feb 22 10:48:07 2008 -0800
389
390 make define2mk.sed work on FreeBSD
391
392 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
393 the define2mk.sed script was identified as the source of the link
394 failure on FreeBSD. The problem is that sed(1) does not always support
395 the '+' operator. It isn't on FreeBSD. The attach patch implements the
396 equivalent, using the '*' operator instead and should work everywhere.
397
398 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
399
400commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
401Author: Detlev Zundel <dzu@denx.de>
402Date: Fri Feb 22 17:21:32 2008 +0100
403
404 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
405
406 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
407 final traces of long-deprecated "ramdisk" kernel parm") makes these
408 changes neccessary.
409
410 Signed-off-by: Detlev Zundel <dzu@denx.de>
411
412commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
413Author: Larry Johnson <lrj@acm.org>
414Date: Thu Feb 21 13:58:16 2008 -0500
415
416 LM75 bug fix for negative temperatures
417
418 When the LM75 temperature sensor measures a temperature below 0 C, the
419 current driver does not perform sign extension, so the result returned is
420 256 C too high. This patch fixes the problem.
421
422 Signed-off-by: Larry Johnson <lrj@acm.org>
423
424commit 5a910c224b13e413bda41922379add6d75c32da3
425Author: Heiko Schocher <hs@denx.de>
426Date: Thu Feb 21 18:33:45 2008 +0100
427
428 IDS8247: update MAINTAINER entry.
429
430 Signed-off-by: Heiko Schocher <hs@denx.de>
431
432commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
433Author: Heiko Schocher <hs@denx.de>
434Date: Thu Feb 21 18:31:15 2008 +0100
435
436 Fix device tree for mgsuvd board.
437
438 Rename the "scc" node in "ethernet" for the mgsuvd board.
439
440 Signed-off-by: Heiko Schocher <hs@denx.de>
441
442commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
443Author: Yuri Tikhonov <yur@emcraft.com>
444Date: Thu Feb 21 14:23:42 2008 +0100
445
446 lwmon5: enable hardware watchdog
447
448 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
449 causing it to reboot the board if U-Boot does a long busy-wait with
450 udelay(). Thus, for these boards we have to restart WD more
451 frequently.
452
453 This patch splits the busy-wait udelay() into smaller, predefined,
454 intervals, so that the watchdog timer may be resetted with the
455 configurable (CONFIG_WD_PERIOD) interval.
456
457 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
458
459commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
460Author: Anatolij Gustschin <agust@denx.de>
461Date: Thu Feb 21 12:52:29 2008 +0100
462
463 ppc4xx: Support for ATI Radeon 9200 card on sequoia
464
465 Adds configuration option for ATI Radeon 9200 card
466 support to sequoia config file. If CONFIG_VIDEO
467 is enabled, TEXT_BASE should be changed to 0xFFF80000.
468
469 Signed-off-by: Anatolij Gustschin <agust@denx.de>
470
471commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
472Author: Kumar Gala <galak@kernel.crashing.org>
473Date: Mon Feb 18 08:18:07 2008 -0600
474
475 Remove duplicate defines for ARRAY_SIZE
476
477 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
478 the define in common.h.
479
480 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
481
482commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
483Author: Kumar Gala <galak@kernel.crashing.org>
484Date: Mon Feb 18 08:09:37 2008 -0600
485
486 ppc: Allow boards to specify effective amount of memory
487
488 For historical reasons we limited the stack to 256M because some boards
489 could only map that much via BATS. However newer boards are capable of
490 mapping more memory (for example 85xx is capable of doing up to 2G).
491
492 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
493
494commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
495Author: Mike Frysinger <vapier@gentoo.org>
496Date: Mon Feb 18 05:24:13 2008 -0500
497
498 include autoconf.mk before any other .mk files
499
500 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
501 those .mk files can have make if statements based on the current config.
502
503 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
504
505commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
506Author: Mike Frysinger <vapier@gentoo.org>
507Date: Mon Feb 18 05:10:07 2008 -0500
508
509 error check autoconf.mk generation
510
511 If any of the steps for generating autoconf.mk fail currently, they go
512 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
513 This is simpler and more robust than placing '|| exit $$?' after every line.
514
515 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
516
517commit 019895a8dee71a9f00da05c03e379f45d581b0fe
518Author: Stefano Babic <sbabic@denx.de>
519Date: Mon Feb 18 08:03:51 2008 +0100
520
521 Fix bug in dependency checking
522
523 By adding VERSION_FILE to the PHONY targets the script
524 /tools/setlocalversion is always called and version_autogenerated.h
525 is replaced only if the script find a modified source file.
526
527 Signed-off-by: Stefano Babic <sbabic@denx.de>
528
529commit 98ba144ccc912eee90dd42699f023c497ce774c6
530Author: Kyungmin Park <kmpark@infradead.org>
531Date: Mon Feb 18 14:35:43 2008 +0900
532
533 Fix GPMC CS2 memory setup at apollon
534
535 It disables the current map first
536
537 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
538
539commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
540Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
541Date: Sun Feb 17 23:52:46 2008 +0100
542
543 uli526x: Fix multiple differ in signedness and parentheses around comparison
544
545 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
546
547commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
548Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
549Date: Sun Feb 17 16:58:04 2008 +0100
550
551 MIPS: Fix CFG_NO_FLASH support
552
553 - Fix flash_init call when CFG_NO_FLASH is used
554 - Remove no more needed flash.c for qemu-mips
555
556 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
557
558commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
559Author: Mike Frysinger <vapier@gentoo.org>
560Date: Sat Feb 16 02:40:18 2008 -0500
561
562 easylogo: clean up some more and add -r (rgb) support
563
564 Michael Hennerich added support for outputting an image in RGB format rather
565 than forcing YUYV all the time. This makes obvious sense if the display you
566 have takes RGB input rather than YUYV.
567
568 Rather than hack in support for options, I've converted it to use getopt and
569 cleaned up the argument parsing in the process.
570
571 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
572 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
573
574commit f65c98129ccada3f7caf97d80395a95b84e911de
575Author: Mike Frysinger <vapier@gentoo.org>
576Date: Sat Feb 16 02:12:37 2008 -0500
577
578 Makefile: add target for $(LDSCRIPT)
579
580 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
581 then change into the board directory and try and create it. This allows you
582 to generate the linker script on the fly based upon board defines (like the
583 Blackfin boards do).
584
585 There should be no regressions due to this change as the normal case is to
586 already have a u-boot.lds file. If that's the case, then there's nothing to
587 generate, and so make will always exit. The fix here is that if the linker
588 script does not exist, the implicit rules take over and attempt to guess how
589 to generate the file.
590
591 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
592
593commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
594Author: Michael Schwingen <michael@schwingen.org>
595Date: Mon Feb 18 23:16:35 2008 +0100
596
597 CFI: Do not use uninitialized cmd_reset
598
599 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
600 commands instead
601
602 From a short test, it looks like AMD-style flash roms treat *any* unknown
603 command write as a reset, at least when in CFI Query mode, so issuing the
604 Intel reset command to AMD-style flashs seems safe (from the small sample I
605 have), plus the 3-cycle magic sequence should kick the state machine into
606 the right state even without a reset command. Since the AMD-style flashs
607 require the unlock sequence for real operation, I chose to try the AMD reset
608 command first, so that Intel flashs do no see an invalid command prior to
609 the CFI query.
610
611 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
612 plus Intel StrataFlash.
613
614 Signed-off-by: Michael Schwingen <michael@schwingen.org>
615 Signed-off-by: Stefan Roese <sr@denx.de>
616
617commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
618Author: Rafal Jaworowski <raj@semihalf.com>
619Date: Thu Feb 21 11:56:44 2008 +0100
620
621 API: Add (c) and licensing notice to the public API header.
622
623 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
624
625commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
626Author: Yuri Tikhonov <yur@emcraft.com>
627Date: Thu Feb 21 11:06:07 2008 +0100
628
629 Fix CPU POST test failure
630
631 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
632 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
633 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
634 This patch just saves the CR value before running the test code, so allowing
635 it to do anything it wants with CR.
636
637 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
638 Acked-by: Yuri Tikhonov <yur@emcraft.com>
639 --
640
641commit d5908b093955415f3d340706378b991f911af671
642Author: Jon Loeliger <jdl@freescale.com>
643Date: Wed Feb 20 15:26:51 2008 -0600
644
645 8610HPCD: Document the flashbank selection switches.
646
647 Signed-off-by: Jon Loeliger <jdl@freescale.com>
648
649commit a551cee99ad1d1da20fd23ad265de47448852f56
650Author: Jon Loeliger <jdl@freescale.com>
651Date: Wed Feb 20 14:22:26 2008 -0600
652
653 86xx: Fix GUR PCI config registers properly.
654
655 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
656 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
657 botched it due to not realizing that 8610 and 8641 had different
658 Global Utility Register defintions, one of which was like 85xx,
659 and the other wasn't. Correct this problem by introducing two
660 symbols, one for each 86xx SoC, but neither of which is named
661 anything like 85xx.
662
663 My bad. Lovely Wednesday with git bisect. You know.
664
665 Signed-off-by: Jon Loeliger <jdl@freescale.com>
666
667commit cb06eb961bdffc8728b38c242473d802e83ab2b4
668Author: Jon Loeliger <jdl@freescale.com>
669Date: Wed Feb 20 12:24:11 2008 -0600
670
671 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
672
673 Without an actual supported video card hooked up, enabling
674 the CONFIG_VIDEO by default just makes it look broken by
675 routing all console output to the video card. Don't.
676
677 Signed-off-by: Jon Loeliger <jdl@freescale.com>
678
679commit 4d264eff4312f230776b913edade7ceb75f1b1e0
680Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
681Date: Wed Jan 30 15:08:15 2008 -0600
682
683 ColdFire: Fix missing code flash size for M5485EVB
684
685 Signed-off-by: James Mahan <kmahan@freescale.com>
686 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
687
688commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
689Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
690Date: Wed Jan 30 15:04:42 2008 -0600
691
692 ColdFire: Fix 5282 and 5271 interrupt mask bit
693
694 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
695
696commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
697Author: Jon Loeliger <jdl@freescale.com>
698Date: Tue Feb 19 12:31:08 2008 -0600
699
700 8610HPCD: Fix typos in two PCI setup registers.
701
702 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
703 were erroneously present as 85xx names and values, leftover from
704 the clone wars. Fix this by removing the 85xx cruft from the
705 86xx codebase.
706
707 Signed-off-by: Jon Loeliger <jdl@freescale.com>
708
709commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
710Author: Jon Loeliger <jdl@freescale.com>
711Date: Mon Feb 18 14:01:56 2008 -0600
712
713 86xx: Convert sbc8641d to use libfdt.
714
715 This is the proper fix for a missing closing brace in the function
716 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
717 The ft_cpu_setup() function in mpc8641hpcn.c should have been
718 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
719 but was missed. Only, the sbc8641d was nominally still using it.
720 It all got ripped out, and the funcality that was in ft_board_setup()
721 was refactored to remove the CPU portions into the new file
722 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
723
724 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
725
726 Signed-off-by: Jon Loeliger <jdl@freescale.com>
727
728commit 04efddc87c50c84f85dad5c331c634a6ce830a83
729Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
730Date: Sun Feb 17 23:35:31 2008 +0100
731
732 mpc86xx: Fix unused variable 'config' and 'immap'
733
734 and remove useless CONFIG_DDR_INTERLEAVE
735
736 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
737
738commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
739Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
740Date: Sun Feb 17 23:03:36 2008 +0100
741
742 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
743
744 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
745
746commit b6f29c84c208a091f95a10cbc9852d729659ba20
747Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
748Date: Sun Feb 17 14:15:31 2008 +0100
749
750 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
751
752 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
753
754commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
755Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
756Date: Sun Feb 17 14:15:32 2008 +0100
757
758 pxa: fix assignment from incompatible pointer type
759
760 fix mmc_bread function prototype
761
762 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
763
764commit 64d792063fff90b8118179b092feee09fe5cae13
765Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
766Date: Sun Feb 17 14:15:30 2008 +0100
767
768 at91cap9adk: fix implicit declaration of function 'eth_init'
769
770 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
771
772commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
773Author: Wolfgang Denk <wd@denx.de>
774Date: Sun Feb 17 15:43:44 2008 +0100
775
776 Remove files added by mistake, update CHANGELOG.
777
778 Signed-off-by: Wolfgang Denk <wd@denx.de>
779
Wolfgang Denk375c4352008-02-17 15:43:44 +0100780commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
781Author: Mike Nuss <mike@terascala.com>
782Date: Wed Feb 6 11:10:11 2008 -0500
783
784 PPC440EPx: Optionally enable second I2C bus
785
786 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
787 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
788 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
789
790 Signed-off-by: Mike Nuss <mike@terascala.com>
791 Cc: Stefan Roese <sr@denx.de>
792
793commit ef5b4f221c22d05770878513951745f236b5b43f
794Author: Niklaus Giger <niklaus.giger@netstal.com>
795Date: Tue Feb 5 10:26:44 2008 +0100
796
797 ppc4xx: HCU4/5. Cleanup configs
798
799 - hcu4.h: Removed define of CONFIG_PPC405GPr
800 - Corrected phy addresses
801 - Fix boot variables
802 - Respect line length of 80 chars
803
804 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
805
806commit 74973126d1be63ac75bdc192f46234dca3a7c421
807Author: Niklaus Giger <niklaus.giger@netstal.com>
808Date: Tue Feb 5 11:31:28 2008 +0100
809
810 ppc4xx: HCU4/5. Cleanups
811
812 - Fix some coding style violations.
813 - Use in/out_u16/32 where appropriate.
814 - Use register names from ppc405.h.
815 - Fix trace useage for Lauterbach.
816 - Remove obsolete generation HCU2.
817 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
818
819 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
820
821commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
822Author: Niklaus Giger <niklaus.giger@netstal.com>
823Date: Tue Feb 5 10:26:41 2008 +0100
824
825 ppc4xx: PPC405GPr fix missing register definitions
826
827 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
828
829commit 214398d9cb22268d9d4f7563359edca0f78297a2
830Author: Larry Johnson <lrj@acm.org>
831Date: Fri Jan 18 21:49:05 2008 -0500
832
833 ppc4xx: Beautify configuration files for Sequoia and Korat boards
834
835 Signed-off-by: Larry Johnson <lrj@acm.org>
836
837commit 30c6a241e88499f536e86d325759e29ba00ff67f
838Author: Anatolij Gustschin <agust@denx.de>
839Date: Fri Feb 15 20:09:01 2008 +0100
840
841 Wipe out assembler warnings while compiling x86 biosemu
842
843 This patch tries to get rid of some assembler warnings about
844 changed .got2 section type while compiling x86 bios emulator
845 code.
846
847 Signed-off-by: Anatolij Gustschin <agust@denx.de>
848
849commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
850Author: Wolfgang Denk <wd@denx.de>
851Date: Fri Feb 15 00:57:09 2008 +0100
852
853 Prepare v1.3.2-rc1 release candidate
854
Wolfgang Denk67a43892008-02-15 00:57:09 +0100855commit f33e9653c9c09868995d788511d573771c209fe5
856Author: Anatolij Gustschin <agust@denx.de>
857Date: Fri Feb 15 00:13:20 2008 +0100
858
859 Fix compile warning on lib_ppc/board.c
860
861 Signed-off-by: Anatolij Gustschin <agust@denx.de>
862
863commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
864Author: Anatolij Gustschin <agust@denx.de>
865Date: Thu Feb 14 18:22:04 2008 +0100
866
867 Add Radeon Mobility 9200 pci device id to the radeon driver
868
869 This patch extends PCI device id table of the
870 radeon driver so that the driver will also support
871 Radeon Mobility 9200 (M9+) based boards.
872
873 Signed-off-by: Anatolij Gustschin <agust@denx.de>
874
875commit 1b8607e1f7143548c6062c28371449ec69588c00
876Author: Anatolij Gustschin <agust@denx.de>
877Date: Thu Feb 14 18:19:50 2008 +0100
878
879 Extend ATI Radeon driver to support more video modes
880
881 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
882 800x600, 640x480 at 24, 16 and 8 bpp.
883
884 Signed-off-by: Anatolij Gustschin <agust@denx.de>
885
886commit 4124382de029d361162a4b8cecc773eb8f26e2a8
887Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
888Date: Sun Feb 10 17:05:20 2008 +0100
889
890 xsengine: fix typo and few coding style
891
892 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
893
894commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
895Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
896Date: Fri Feb 8 21:25:58 2008 +0100
897
898 Fix wrong memory limit calculation in memory-test
899
900 If the length of the memory address range passed to the "mtest" command is
901 not of the form 2^x - 1, not all address lines are tested. This bug is
902 inherited from the original software at
903 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
904 this.
905
906 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
907
908commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
909Author: Wolfgang Denk <wd@denx.de>
910Date: Fri Feb 15 00:11:39 2008 +0100
911
912 Coding STyle cleanup.
913
914 Signed-off-by: Wolfgang Denk <wd@denx.de>
915
916commit f6921e3dc331293c873ec4d109fd5517a42a90b3
917Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
918Date: Tue Feb 5 13:30:43 2008 +0900
919
920 sh: Fix register address of SH7722
921
922 The address of SH7722 is wrong by old document.
923 This patch fixes this problem.
924
925 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
926
927commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
928Author: Mike Frysinger <vapier@gentoo.org>
929Date: Mon Feb 4 17:44:23 2008 -0500
930
931 only update version header as needed
932
933 Constantly rebuilding the version header will force useless relinking, so we
934 simply need to compare the new header with the existing one before updating
935 it.
936
937 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
938
939commit 208447f8e953f347425eb92c8e28d59e6d911363
940Author: Mike Frysinger <vapier@gentoo.org>
941Date: Mon Jan 28 05:56:19 2008 -0500
942
943 Do not specify a CROSS_COMPILE default when executing size
944
945 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
946
947commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
948Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
949Date: Wed Feb 13 11:19:19 2008 +0100
950
951 Fix return value of mtest when CFG_ALT_MEMTEST set
952
953 Fix a missing return statement from a non-void function.
954
955 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
956
957commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
958Author: Timur Tabi <timur@freescale.com>
959Date: Wed Jan 9 14:35:26 2008 -0600
960
961 85xx, 86xx: Determine I2C clock frequencies and store in global_data
962
963 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
964
965 Update the get_clocks() function in 85xx and 86xx to determine the I2C
966 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
967
968 Signed-off-by: Timur Tabi <timur@freescale.com>
969
970commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
971Author: Wolfgang Denk <wd@denx.de>
972Date: Thu Feb 14 23:18:01 2008 +0100
973
974 TQM834x: clean up configuration
975
976 Get board name consistent with Linux and elsewhere;
977 get rid of local network definitions etc.
978
979 Signed-off-by: Wolfgang Denk <wd@denx.de>
980
981commit 38cc09c55b1d7f233789052c6fc462e5377669a9
982Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
983Date: Thu Feb 14 08:02:12 2008 +0100
984
985 TFTP: fix search of ':' in BootFile
986
987 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
988
989commit 0bc9efada170096c6b273f19165e32936d330d80
990Author: Wolfgang Denk <wd@denx.de>
991Date: Thu Feb 14 22:46:55 2008 +0100
992
993 Coding style cleanup; update CHANGELOG.
994
995 Signed-off-by: Wolfgang Denk <wd@denx.de>
996
Wolfgang Denk0bc9efa2008-02-14 22:46:55 +0100997commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
998Author: Wolfgang Denk <wd@denx.de>
999Date: Thu Feb 14 22:43:22 2008 +0100
1000
1001 PPC: Use r2 instead of r29 as global data pointer
1002
1003 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
1004 will refuse to use load/store multiple insns; instead, it issues a
1005 list of simple load/store instructions upon function entry and exit,
1006 resulting in bigger code size, which in turn makes the build for a
1007 few boards fail.
1008
1009 Use r2 instead.
1010
1011 Signed-off-by: Wolfgang Denk <wd@denx.de>
1012
1013commit 3c234efa693bc59906c2be55c7918ecbb55392ea
1014Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
1015Date: Wed Jan 30 09:08:49 2008 +0100
1016
1017 ARM: make the machid configurable via the environment
1018
1019 If the variable "machid" exists, let do_bootm_linux use that instead
1020 of bd->bi_arch_number.
1021
1022 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
1023
1024commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
1025Author: Vlad Lungu <vlad@comsys.ro>
1026Date: Wed Jan 23 16:34:46 2008 +0200
1027
1028 Use #ifdef CONFIG_FSLDMAFEC
1029
1030 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
1031 fails
1032
1033 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
1034
1035commit 26c7bab81e08dc7bd696c48f753428a829629bd8
1036Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1037Date: Sat Jan 19 10:25:59 2008 +0900
1038
1039 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
1040
1041 Current MII_DEBUG is confusing in two ways. One is useless define-then-
1042 undef at the top of the file. The other is there is only one debug() in
1043 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
1044 While there are many useful printf()/puts() debug codes, but they are for
1045 DEBUG, not for MII_DEBUG.
1046
1047 This patch tries to put them all together into MII_DEBUG and debug().
1048
1049 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1050
1051commit 751b9b5189f3274b03c809172631316d6b002c82
1052Author: Kyungmin Park <kmpark@infradead.org>
1053Date: Thu Jan 17 16:43:25 2008 +0900
1054
1055 OneNAND Initial Program Loader (IPL) support
1056
1057 This patch enables the OneNAND boot within U-Boot.
1058 Before this work, we used another OneNAND IPL called X-Loader based
1059 on open source. With this work, we can build the oneboot.bin image
1060 without other program.
1061
1062 The build sequence is simple.
1063 First, it compiles the u-boot.bin
1064 Second, it compiles OneNAND IPL
1065 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
1066 The mechanism is similar with NAND boot except it boots from itself.
1067
1068 Another thing is that you can only use the OneNAND IPL only to work
1069 other bootloader such as RedBoot and so on.
1070
1071 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1072
1073commit 21f6f9636f0e978397548751347425fbf8d42bb3
1074Author: Andy Fleming <afleming@freescale.com>
1075Date: Wed Jan 16 13:06:59 2008 -0600
1076
1077 Fix CONFIG_MMC usage in fat code
1078
1079 A #if statement in fat.c depended on CONFIG_MMC, instead of
1080 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
1081 as "1" rather than just defined. Now it's better.
1082
1083 Signed-off-by: Andy Fleming <afleming@freescale.com>
1084
1085commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
1086Author: Rafal Jaworowski <raj@semihalf.com>
1087Date: Tue Jan 15 12:52:31 2008 +0100
1088
1089 ppc: Refactor cache routines, so there is only one common set.
1090
1091 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1092
Wolfgang Denk67a43892008-02-15 00:57:09 +01001093commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
1094Author: Jon Loeliger <jdl@jdl.com>
1095Date: Wed Jan 23 15:55:02 2008 -0600
1096
1097 86xx: Fix compilation warning in sys_eprom.c
1098
1099 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
1100
1101 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1102
Wolfgang Denk375c4352008-02-17 15:43:44 +01001103commit 65230107025733e89e28fd5e5cfd916d4953c28a
1104Author: Haavard Skinnemoen <hskinnemoen at>
1105Date: Fri Feb 22 11:40:50 2008 +0000
1106
1107 Move AT91RM9200DK board support under board/atmel
1108
1109 We already have a vendor subdir for Atmel, so we should use it.
1110
1111 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
1112
1113commit 6d0943a6be99977d6d853d51749e9963d68eb192
1114Author: Andreas Engel <andreas.engel@ericsson.com>
1115Date: Mon Jan 14 09:06:52 2008 +0000
1116
1117 ARM: cleanup duplicated exception handlingcode
1118
1119 Move duplicated exception handling code into lib_arm.
1120
1121 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
1122
1123commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
1124Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
1125Date: Fri Feb 1 10:09:03 2008 +0000
1126
1127 Support for Artila M-501 starter kit
1128
1129 Kimmo Leppala / Sysart and
1130 Timo Tuunainen / Sysart
1131
1132commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
1133Author: Stelian Pop <stelian@popies.net>
1134Date: Mon Feb 11 10:50:19 2008 +0000
1135
1136 AT91CAP9 support
1137
1138 ---------------------------------
1139
1140 read_dataflash() takes a signed char pointer as a parameter. Silence a
1141 few warnings dues to incorrect parameter types in env_dataflash.c.
1142
1143 Signed-off-by: Stelian Pop <stelian@popies.net>
1144
1145commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
1146Author: Stelian Pop <stelian@popies.net>
1147Date: Thu Feb 7 09:42:57 2008 +0000
1148
1149 AT91CAP9 support : move board files to Atmel vendor directory.
1150
1151 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
1152
1153 Signed-off-by: Stelian Pop <stelian@popies.net>
1154
1155commit 7263ef191b87da94768f762c7093bedeb70db98f
1156Author: Stelian Pop <stelian at>
1157Date: Thu Jan 3 21:15:56 2008 +0000
1158
1159 AT91CAP9 support : MACB changes
1160
1161 Signed-off-by: Stelian Pop <stelian <at> popies.net>
1162 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
1163
1164commit 6afcabf11d7321850f4feaadfee841488ace54c5
1165Author: Stelian Pop <stelian@popies.net>
1166Date: Thu Feb 7 16:37:54 2008 +0000
1167
1168 AT91CAP9 support : board/ files
1169
1170 Signed-off-by: Stelian Pop <stelian@popies.net>
1171
1172commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
1173Author: Stelian Pop <stelian at>
1174Date: Wed Jan 30 21:15:54 2008 +0000
1175
1176 AT91CAP9 support : cpu/ files
1177
1178 Signed-off-by: Stelian Pop <stelian <at> popies.net>
1179
1180commit fa506a926cec348805143576c941f8e61b333cc0
1181Author: Stelian Pop <stelian@popies.net>
1182Date: Thu Jan 31 21:15:53 2008 +0000
1183
1184 AT91CAP9 support : include/ files
1185
1186 Signed-off-by: Stelian Pop <stelian@popies.net>
1187
1188commit 20b197c6f2799af399a68f96a1aff543a75621b8
1189Author: Stelian Pop <stelian@popies.net>
1190Date: Sun Jan 20 19:49:21 2008 +0000
1191
1192 AT91CAP9 support : build integration
1193
1194 Signed-off-by: Stelian Pop <stelian@popies.net>
1195
1196commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
1197Author: Stelian Pop <stelian@popies.net>
1198Date: Sun Jan 20 21:07:00 2008 +0000
1199
1200 Improve DataFlash CS definition.
1201
1202 Use a structure instead of the error prone unnamed array to
1203 define the possible dataflash banks.
1204
1205 Signed-off-by: Stelian Pop <stelian@popies.net>
1206
1207commit a6cdd21b56014208706238712a853a9e9a0a2290
1208Author: Stelian Pop <stelian@popies.net>
1209Date: Sat Jan 19 21:09:35 2008 +0000
1210
1211 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
1212
1213 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
1214
1215 cpu/arm926ejs/start.o: In function `cpu_init_crit':
1216 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
1217
1218 Signed-off-by: Stelian Pop <stelian@popies.net>
1219
1220commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
1221Author: Peter Pearse <peter.pearse@arm.com>
1222Date: Fri Feb 1 16:50:24 2008 +0000
1223
1224 Fix timer overflow in DaVinci
1225 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
1226
1227commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
1228Author: Peter Pearse <peter.pearse@arm.com>
1229Date: Fri Feb 1 16:49:08 2008 +0000
1230
1231 Update board NetStar
1232 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1233
Wolfgang Denk67a43892008-02-15 00:57:09 +01001234commit b7f6193e76651e1fd606e46eb11915b53cb6618b
1235Author: Niklaus Giger <niklaus.giger@netstal.com>
1236Date: Tue Feb 5 10:26:42 2008 +0100
1237
1238 ppc4xx: HCU4/5. Fix make O=../xx
1239
1240 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1241
1242commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
1243Author: Larry Johnson <lrj@acm.org>
1244Date: Tue Jan 22 08:51:59 2008 -0500
1245
1246 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
1247
1248 Signed-off-by: Larry Johnson <lrj@acm.org>
1249
Wolfgang Denk0bc9efa2008-02-14 22:46:55 +01001250commit fe891ecf4d187e9d11dde869ed4623af52b54451
1251Author: Hiroshi Ito <ito@mlb.co.jp>
1252Date: Thu Jan 31 18:35:04 2008 +0900
1253
1254 NFS Timeout with large files.
1255
1256 Retry to send NFS packet before reaching timeout.
1257
1258 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
1259
1260commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
1261Author: Johannes Stezenbach <js@sig21.net>
1262Date: Tue Jan 29 00:11:25 2008 +0100
1263
1264 Add dependencies to avoid race conditions with parallel make.
1265
1266 Signed-off-by: Johannes Stezenbach <js@sig21.net>
1267
1268commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
1269Author: Mike Frysinger <vapier@gentoo.org>
1270Date: Mon Jan 28 05:46:01 2008 -0500
1271
1272 Mark board_init_[fr] as noreturn
1273
1274 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1275
1276commit 161b2af4d7b48fd602ce333c355a4df0337892bb
1277Author: Mike Frysinger <vapier@gentoo.org>
1278Date: Mon Jan 28 05:28:50 2008 -0500
1279
1280 Only use TEXT_BASE if defined by the board
1281
1282 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1283
1284commit 1b769881750030f10743808b9d6013e11f559350
1285Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1286Date: Fri Jan 25 07:54:47 2008 +0100
1287
1288 Fix remaining CONFIG_COMMANDS
1289
1290 update comments
1291 Fix coding style
1292
1293 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1294
1295commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
1296Author: Niklaus Giger <niklaus.giger@netstal.com>
1297Date: Mon Jan 21 16:46:00 2008 +0100
1298
1299 Add *~ to .gitignore
1300
1301 One should never add a backup file ending in with ~ to the git repository.
1302
1303 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1304
1305commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
1306Author: Kumar Gala <galak@kernel.crashing.org>
1307Date: Thu Jan 17 00:02:10 2008 -0600
1308
1309 Remove duplicate defines for ARRAY_SIZE
1310
1311 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1312
1313commit c77ce474b1c57b13e9d36d9830f147966c143694
1314Author: Stelian Pop <stelian@popies.net>
1315Date: Mon Jan 14 22:08:14 2008 +0100
1316
1317 Fix incorrect address test in AT91F_DataflashSelect().
1318
1319 Signed-off-by: Stelian Pop <stelian@popies.net>
1320
1321commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
1322Author: Kumar Gala <galak@kernel.crashing.org>
1323Date: Wed Feb 13 15:09:58 2008 -0600
1324
1325 Fix building of fdt_support.c if DEBUG set
1326
1327 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1328
Wolfgang Denk67a43892008-02-15 00:57:09 +01001329commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
1330Author: Jon Loeliger <jdl@freescale.com>
1331Date: Tue Feb 12 14:53:28 2008 -0600
1332
1333 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
1334
1335 These replace direct structure references for IMMR sections.
1336
1337 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1338
Wolfgang Denk0bc9efa2008-02-14 22:46:55 +01001339commit c62776be8dca4097ca03d4f9415f08d4887b45d0
1340Author: Wolfgang Denk <wd@denx.de>
1341Date: Tue Feb 12 00:45:06 2008 +0100
1342
1343 Get rid of "#undef DEBUG" from board config files.
1344
1345 Signed-off-by: Wolfgang Denk <wd@denx.de>
1346
1347commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
1348Author: Timur Tabi <timur@freescale.com>
1349Date: Tue Jan 15 17:09:41 2008 -0600
1350
1351 Remove #undef DEBUG from MPC83xx board header files
1352
1353 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
1354 The inclusion of this line makes it impossible to enable debug code in
1355 other source files, because "#define DEBUG" typically needs to be defined
1356 before any header files are included.
1357
1358 Signed-off-by: Timur Tabi <timur@freescale.com>
1359
1360commit 69018ce2e086e9caf35b914d675b82bc4888f077
1361Author: Kumar Gala <galak@kernel.crashing.org>
1362Date: Thu Jan 17 08:25:45 2008 -0600
1363
1364 QE: Move FDT support into a common file
1365
1366 Move the flat device tree setup for QE related devices into
1367 a common file shared between 83xx & 85xx platforms that have QE's.
1368
1369 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1370
1371commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
1372Author: Grzegorz Bernacki <gjb@semihalf.com>
1373Date: Mon Jan 28 10:15:02 2008 +0100
1374
1375 ADS5121e: DDR2 init/timing update.
1376
1377 Signed-off-by: John Rigby <jrigby@freescale.com>
1378 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
1379
1380commit ac9152830d7fdebace8a260b7737ef2870c21ca0
1381Author: John Rigby <jrigby@freescale.com>
1382Date: Wed Jan 30 13:36:57 2008 -0700
1383
1384 Device tree updates
1385
1386 Changes to match 5121 device tree going mainline in 2.6.25.
1387
1388 Change OF_SOC from "soc5121" to plain "soc".
1389 Remove unneeded "ref-frequency" fixups.
1390 Remove "address" enetaddr fixup.
1391
1392 Add bus-frequency fixup for old OF_SOC so old
1393 kernels with old device trees will work with new
1394 u-boot with 66MHz IPS clock
1395
1396 Signed-off-by: John Rigby <jrigby@freescale.com>
1397
1398commit de55d18df3ff2ea614624e74793de7c43520e0e7
1399Author: John Rigby <jrigby@freescale.com>
1400Date: Wed Jan 30 13:36:56 2008 -0700
1401
1402 Change IPS freq to 66MHz
1403
1404 Recommended frequency is 66MHz
1405 Change divider from 4 to 3.
1406
1407 Signed-off-by: John Rigby <jrigby@freescale.com>
1408
1409commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
1410Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1411Date: Mon Jan 14 22:38:55 2008 +0100
1412
1413 xsengine: rename board_post_init to board_late_init
1414
1415 missing migration from "Cleanup of some init functions"
1416 in c837dcb1a316745092567bfe4fb266d0941884ff
1417
1418 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1419
1420commit 8dafa87476b0d7170e219c2f5e3842c833a91807
1421Author: Larry Johnson <lrj@acm.org>
1422Date: Sat Jan 12 23:35:33 2008 -0500
1423
1424 Add attribute POST_PREREL to ECC memory POST
1425
1426 Signed-off-by: Larry Johnson <lrj@acm.org>
1427
Wolfgang Denk67a43892008-02-15 00:57:09 +01001428commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
1429Author: Kumar Gala <galak@kernel.crashing.org>
1430Date: Thu Jan 17 08:25:45 2008 -0600
1431
1432 QE: Move FDT support into a common file
1433
1434 Move the flat device tree setup for QE related devices into
1435 a common file shared between 83xx & 85xx platforms that have QE's.
1436
1437 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1438
1439commit d38da537943cd36356b9d3d9d9b60533554b81d8
1440Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1441Date: Wed Jan 23 17:20:14 2008 +0100
1442
1443 AVR32: Make SDRAM refresh rate configurable
1444
1445 The existing code assumes the SDRAM row refresh period should always
1446 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
1447 refresh rate should really be 7.81 us.
1448
1449 Add a refresh_period member to struct sdram_info and initialize it
1450 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
1451 panic() until the refresh_period member is updated properly.
1452
1453 Big thanks to Gerhard Berghofer for pointing out this issue.
1454
1455 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1456
1457commit 61151cccb660cdb06a07fb283de6089913d7bde0
1458Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1459Date: Thu Apr 19 10:10:11 2007 +0200
1460
1461 ATSTK1000: Fix potential flash programming bug
1462
1463 The (now obsolete) atngw100 flash programming code was having problems
1464 programming the onboard at49bv642 chip. The atstk1000 flash
1465 programming code may have the same bug, so import fix for this problem
1466 from the AVR32 Linux BSP.
1467
1468 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1469
1470commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
1471Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1472Date: Thu Nov 22 17:04:13 2007 +0100
1473
1474 ATSTK1004: Fix comment about default load address
1475
1476 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
1477 wouldn't have worked anyway since the board can only access 4MB of
1478 SDRAM.
1479
1480 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1481
1482commit 8269ab53608d8db2aa06969c337ab0b0518211e5
1483Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1484Date: Thu Nov 22 17:01:24 2007 +0100
1485
1486 ATSTK1002: Use SDRAM + 4MB as default load address
1487
1488 Many people run into problems when they compile a big kernel and load
1489 the uImage at the default SDRAM + 2MB address as the kernel will
1490 overwrite the uImage as it is being unpacked. Increase the default
1491 load address so that we can load a 4MB kernel image without any
1492 problems.
1493
1494 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1495
1496commit 2bcacc2d841b77f3d2d3910db722003742727e9f
1497Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1498Date: Thu Nov 22 16:51:39 2007 +0100
1499
1500 ATNGW100: Fix default mtest range
1501
1502 Let mtest cover the whole SDRAM except the last megabyte, which is
1503 where u-boot lives.
1504
1505 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1506
1507commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
1508Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1509Date: Tue Jan 22 15:31:56 2008 +0900
1510
1511 sh: Fix register address of SH7722.
1512
1513 The address of SH7722 is wrong by old document.
1514 This patch fixes this problem.
1515
1516 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1517
1518commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
1519Author: Mike Frysinger <vapier@gentoo.org>
1520Date: Mon Feb 4 19:26:57 2008 -0500
1521
1522 new command for displaying strings at specified memory locations
1523
1524 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1525
1526commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
1527Author: Mike Frysinger <vapier@gentoo.org>
1528Date: Mon Feb 4 19:26:57 2008 -0500
1529
1530 rewrite/cleanup Blackfin RTC driver
1531
1532 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1533
1534commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
1535Author: Mike Frysinger <vapier@gentoo.org>
1536Date: Mon Feb 4 19:26:57 2008 -0500
1537
1538 generate u-boot.ldr for Blackfin targets
1539
1540 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1541
1542commit b779f7a59530436040f157f7841db7ab796542df
1543Author: Mike Frysinger <vapier@gentoo.org>
1544Date: Mon Feb 4 19:26:57 2008 -0500
1545
1546 scrub unused symbols
1547
1548 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1549
1550commit cc2977acc3bbbb7850f16645dd1081f95335868d
1551Author: Mike Frysinger <vapier@gentoo.org>
1552Date: Mon Feb 4 19:26:57 2008 -0500
1553
1554 move Blackfin cpu object list to respective cpu directories
1555
1556 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1557
1558commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
1559Author: Mike Frysinger <vapier@gentoo.org>
1560Date: Mon Feb 4 19:26:57 2008 -0500
1561
1562 interface to Blackfin on-chip One-Time-Programmable memory
1563
1564 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1565
1566commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
1567Author: Mike Frysinger <vapier@gentoo.org>
1568Date: Mon Feb 4 19:26:56 2008 -0500
1569
1570 add support for memory commands with Blackfin L1 instruction memory
1571
1572 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1573
1574commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
1575Author: Mike Frysinger <vapier@gentoo.org>
1576Date: Mon Feb 4 19:26:56 2008 -0500
1577
1578 use C code rather than inline assembly
1579
1580 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1581
1582commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
1583Author: Mike Frysinger <vapier@gentoo.org>
1584Date: Mon Feb 4 19:26:56 2008 -0500
1585
1586 add Blackfin-specific reginfo command
1587
1588 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1589
1590commit 0858b835e7ea501ea084d34cef75932f098342bb
1591Author: Mike Frysinger <vapier@gentoo.org>
1592Date: Mon Feb 4 19:26:55 2008 -0500
1593
1594 add support for Blackfin symbol prefixes to examples
1595
1596 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1597
1598commit 8dc48d71a4be753ea9f84956cd33600de35fad04
1599Author: Mike Frysinger <vapier@gentoo.org>
1600Date: Mon Feb 4 19:26:55 2008 -0500
1601
1602 add Blackfin-specific bdinfo command
1603
1604 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1605
1606commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
1607Author: Mike Frysinger <vapier@gentoo.org>
1608Date: Mon Feb 4 19:26:55 2008 -0500
1609
1610 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
1611
1612 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1613
1614commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
1615Author: Mike Frysinger <vapier@gentoo.org>
1616Date: Mon Feb 4 19:26:55 2008 -0500
1617
1618 unify the Blackfin board targets
1619
1620 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1621
1622commit d4d7730853e5d675f76ec666807da3028c91d592
1623Author: Mike Frysinger <vapier@gentoo.org>
1624Date: Mon Feb 4 19:26:55 2008 -0500
1625
1626 punt Blackfin VDSP headers and import sanitized/auto-generated ones
1627
1628 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1629
1630commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
1631Author: Mike Frysinger <vapier@gentoo.org>
1632Date: Mon Feb 4 19:26:54 2008 -0500
1633
1634 always pull in asm/blackfin.h for Blackfin ports
1635
1636 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1637
1638commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
1639Author: Mike Frysinger <vapier@gentoo.org>
1640Date: Mon Feb 4 19:26:54 2008 -0500
1641
1642 add missing __raw versions of Blackfin read/write io functions
1643
1644 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1645
1646commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
1647Author: Mike Frysinger <vapier@gentoo.org>
1648Date: Mon Feb 4 19:26:54 2008 -0500
1649
1650 add the default Blackfin logo used by Blackfin boards with splash screens
1651
1652 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1653
1654commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
1655Author: Mike Frysinger <vapier@gentoo.org>
1656Date: Mon Feb 4 19:26:54 2008 -0500
1657
1658 add some more Blackfin docs
1659
1660 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1661
1662commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
1663Author: Mike Frysinger <vapier@gentoo.org>
1664Date: Mon Feb 4 19:26:54 2008 -0500
1665
1666 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
1667
1668 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1669
1670commit 4087bc88cebec75c432a7fe9f6afb545b0919831
1671Author: Mike Frysinger <vapier@gentoo.org>
1672Date: Mon Feb 4 19:26:54 2008 -0500
1673
1674 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
1675
1676 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1677
1678commit b45264ee85cbd92020640a32e02fb434fd557108
1679Author: Mike Frysinger <vapier@gentoo.org>
1680Date: Mon Feb 4 19:26:53 2008 -0500
1681
1682 add gitignores for Blackfin pieces
1683
1684 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1685
Wolfgang Denk0bc9efa2008-02-14 22:46:55 +01001686commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
1687Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1688Date: Fri Jan 18 01:14:03 2008 +0100
1689
1690 TFTP: add host ip addr support
1691
1692 allow to use a different server as set in serverip
1693 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
1694 if not defined the max length will be at 128
1695
1696 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1697
Wolfgang Denk67a43892008-02-15 00:57:09 +01001698commit e56b4b494cd92def577969f9678395aa22d34c9f
1699Author: Timur Tabi <timur@freescale.com>
1700Date: Wed Jan 9 14:35:26 2008 -0600
1701
1702 85xx,86xx: Determine I2C clock frequencies and store in global_data
1703
1704 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
1705
1706 Update the get_clocks() function in 85xx and 86xx to determine the I2C
1707 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
1708
1709 Signed-off-by: Timur Tabi <timur@freescale.com>
1710
Wolfgang Denk0bc9efa2008-02-14 22:46:55 +01001711commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
1712Author: Wolfgang Denk <wd@denx.de>
1713Date: Thu Dec 27 10:56:54 2007 +0100
1714
1715 OMAP5912: fix FIFO handling in UART driver
1716
1717 According to the OMAP5912 Serial Interfaces Reference Guide (see
1718 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
1719 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
1720 changed when the baud clock is not running, i. e. when both DLL and
1721 DLH are set to 0.
1722
1723 Thus make sure that DLL and DLH are 0 when writing the FCR.
1724
1725 Signed-off-by: Wolfgang Denk <wd@denx.de>
1726
1727commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
1728Author: Harald Welte <laforge@openmoko.org>
1729Date: Wed Dec 19 15:10:52 2007 +0100
1730
1731 ARM: S3C24x0 SoC NAND controller support
1732
1733 This patch adds NAND support to the S3C24x0 SoC code in u-boot
1734
1735 Signed-off-by: Harald Welte <laforge@openmoko.org>
1736
1737commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
1738Author: Harald Welte <laforge@openmoko.org>
1739Date: Wed Dec 19 14:24:40 2007 +0100
1740
1741 ARM: s3c24xx: Multiple serial port support
1742
1743 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
1744
1745 Signed-off-by: Harald Welte <laforge@openmoko.org>
1746
1747commit a25f72f1f73a11de68251fb88c89991e202e68fa
1748Author: Harald Welte <laforge@openmoko.org>
1749Date: Wed Dec 19 14:16:57 2007 +0100
1750
1751 ARM: arm920t: Allow use of 'gd' pointer from IRQ
1752
1753 This patch allows us to use the 'gd' pointer (and thus environment
1754 and everything else associated with it) from interrupt context on
1755 arm920t.
1756
1757 Signed-off-by: Harald Welte <laforge@openmoko.org>
1758
1759commit be19bd5cd0f454b63298844a0b5377e029b2caad
1760Author: Harald Welte <laforge@openmoko.org>
1761Date: Wed Dec 19 14:19:38 2007 +0100
1762
1763 ARM: arm920/s3c24xx: IRQ demulitplexer callback
1764
1765 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
1766 plus a stub implementation of it for the S3C2410.
1767
1768 The purpose is to allow arm920t implementations such as the s3c24x0 to
1769 implement interrupt handlers in u-boot without having to touch core
1770 arm920t code.
1771
1772 Signed-off-by: Harald Welte <laforge@openmoko.org>
1773
1774commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
1775Author: Hebbar <gururajakr@sanyo.co.in>
1776Date: Tue Dec 18 16:03:07 2007 -0800
1777
1778 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
1779
1780 Add ifdef to bdinfo command to display ethernet information
1781 only if CONFIG_CMD_NET is defined for arm modules.
1782
1783 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
1784
1785commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
1786Author: Hebbar <gururajakr@sanyo.co.in>
1787Date: Tue Dec 18 16:00:54 2007 -0800
1788
1789 ARM: add I2C init function call in lib_arm/board.c
1790
1791 Adds I2C init func call to init sequence for ARM boards. This is
1792 present in ppc,blackfin and other processor init sequence.
1793
1794 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
1795
Wolfgang Denk67a43892008-02-15 00:57:09 +01001796commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
1797Author: Stefan Roese <sr@denx.de>
1798Date: Fri Feb 1 09:38:29 2008 +0100
1799
1800 ppc4xx: Fix ndfc HW ECC byte order
1801
1802 The current ndfc HW ECC implementation swaps the first two ECC bytes.
1803 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
1804 so this swapping in the HW ECC driver is bogus. This patch fixes this
1805 problem and now really uses the SMC ECC byte order.
1806
1807 Thanks to Sean MacLennan for pointing this out.
1808
1809 Signed-off-by: Stefan Roese <sr@denx.de>
1810
1811commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
1812Author: Stefan Roese <sr@denx.de>
1813Date: Wed Jan 30 15:35:50 2008 +0100
1814
1815 ppc4xx: Fix GPIO configuration for pcs440ep
1816
1817 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
1818 49-63 for GPIO. They have been configured as trace signals. This patch
1819 fixes this by clearing the corresponding bit.
1820
1821 Signed-off-by: Stefan Roese <sr@denx.de>
1822
1823commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
1824Author: Stefan Roese <sr@denx.de>
1825Date: Wed Jan 30 14:48:28 2008 +0100
1826
1827 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
1828
1829 Signed-off-by: Stefan Roese <sr@denx.de>
1830
Wolfgang Denk0bc9efa2008-02-14 22:46:55 +01001831commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
1832Author: Ladislav Michl <ladis@linux-mips.org>
1833Date: Fri Dec 7 00:42:32 2007 +0100
1834
1835 ARM: Board voiceblue update
1836
1837 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1838
1839commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
1840Author: Ladislav Michl <ladis@linux-mips.org>
1841Date: Thu Dec 6 23:24:57 2007 +0100
1842
1843 ARM: AT91RM9200 based boards config cleanup
1844
1845 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1846
1847 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
1848 indentation.
1849
1850commit 481f28b1db5cd21deb55f69399ba240e107af4c7
1851Author: Ladislav Michl <ladis@linux-mips.org>
1852Date: Thu Dec 6 22:59:16 2007 +0100
1853
1854 ARM: Fix at91rm9200dk base address
1855
1856 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
1857 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
1858 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
1859 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
1860 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
1861 I'm sending this patch 4th (!) time in hope it produces at least some
1862 reaction.
1863
1864 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1865
1866 Fix at91rm9200dk base and environment address.
1867
1868commit c95219fae2a7add7daa2f91aedca65b1698465c7
1869Author: stefano babic <sbabic@denx.de>
1870Date: Tue Nov 20 10:40:24 2007 +0100
1871
1872 MMC for PXA 27X (resubmit)
1873
1874 MMC support for X_Scale PXA is broken and does not work.
1875 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
1876 There were already some patches around the world but none of them was
1877 merged into the official u-boot tree.
1878
1879 This patch makes order fixing this issue. Resubmit after code cleanup.
1880
1881 Applied and tested on PXA 270 (TrizepsIV module).
1882
1883 Signed-off-by: Stefano Babic <sbabic@denx.de>
1884
1885commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
1886Author: stefano babic <sbabic@denx.de>
1887Date: Tue Nov 20 10:37:04 2007 +0100
1888
1889 Fix gcc issues in pxa-regs.h
1890
1891 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
1892 issues generates wrong code.
1893 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
1894 This patch fixes the problem and solves the gcc-4 issues as the linux
1895 kernel does.
1896
1897 Signed-off-by: Stefano Babic <sbabic@denx.de>
1898 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
1899
1900commit 7047b388876e7b905b2ec4edb8010543e3641b85
1901Author: Jens Gehrlein <sew_s@tqs.de>
1902Date: Tue Jan 29 08:45:03 2008 +0100
1903
1904 TQM834x: enable DHCP
1905
1906 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
1907 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1908
1909commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
1910Author: Jens Gehrlein <sew_s@tqs.de>
1911Date: Tue Jan 29 08:45:02 2008 +0100
1912
1913 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
1914
1915 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
1916 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1917
1918commit 8931ab176025b03cfc320b3fd1eca432a88ed560
1919Author: Ben Warren <biggerbadderben@gmail.com>
1920Date: Sat Jan 26 23:41:19 2008 -0500
1921
1922 Fix conditional compilation of mpx8xxx_spi driver
1923
1924 This driver should only compile if CONFIG_MPC8XXX_SPI is set
1925
1926 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1927 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1928
1929commit 63f732d3d3880feb531f48af247c025bf01462b0
1930Author: Rafal Jaworowski <raj@semihalf.com>
1931Date: Tue Jan 29 17:00:34 2008 +0100
1932
1933 API: Provide dummy halt() in the glue layer.
1934
1935 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
1936
1937 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1938
1939commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
1940Author: Rafal Jaworowski <raj@semihalf.com>
1941Date: Tue Jan 29 16:57:38 2008 +0100
1942
1943 API: Convert conditional building to the new scheme.
1944
1945 This fixes a build breakage with CONFIG_API enabled, which appeared after
1946 the recent changes in the U-Boot build system.
1947
1948 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1949
1950commit 98b742489c09780be6a832eeaa4e5eff824792bb
1951Author: Wolfgang Denk <wd@denx.de>
1952Date: Fri Jan 25 09:56:17 2008 +0100
1953
1954 inka4x0: remove dead code
1955
1956 Signed-off-by: Wolfgang Denk <wd@denx.de>
1957
Wolfgang Denk67a43892008-02-15 00:57:09 +01001958commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
1959Author: Becky Bruce <becky.bruce@freescale.com>
1960Date: Wed Jan 23 16:31:06 2008 -0600
1961
1962 86xx: Add reginfo command
1963
1964 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1965
1966commit ddcebcb638715a6278da93b553d5016f99823816
1967Author: Becky Bruce <becky.bruce@freescale.com>
1968Date: Wed Jan 23 16:31:05 2008 -0600
1969
1970 86xx: Add print_laws function to fsl_law.c
1971
1972 This can be used for debug, and will be used by board code
1973 to help implement reginfo.
1974
1975 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1976
1977commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
1978Author: Becky Bruce <becky.bruce@freescale.com>
1979Date: Wed Jan 23 16:31:04 2008 -0600
1980
1981 86xx: Remove old-style law setup code
1982
1983 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
1984
1985 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1986
1987commit 713d8186649dae874613d495b0cecaa039a98b30
1988Author: Becky Bruce <becky.bruce@freescale.com>
1989Date: Wed Jan 23 16:31:03 2008 -0600
1990
1991 86xx: Convert sbc8641d to use new law setup code.
1992
1993 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1994
1995commit 031976f6364b93833e989f57e9f1e023e0be8c4c
1996Author: Becky Bruce <becky.bruce@freescale.com>
1997Date: Wed Jan 23 16:31:02 2008 -0600
1998
1999 86xx: Convert mpc8610hpcd to new law setup method.
2000
2001 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2002
2003commit 4933b91f8a49e436681f163df3173beb91cac44a
2004Author: Becky Bruce <becky.bruce@freescale.com>
2005Date: Wed Jan 23 16:31:01 2008 -0600
2006
2007 86xx: Support new law setup method and convert mpc8641
2008
2009 Adds the support code in cpu/mpc86xx for the new law setup code
2010 recently created fsl_law.c, and changes the MPC8641HPCN config
2011 to use this code.
2012
2013 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2014
2015commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
2016Author: Becky Bruce <becky.bruce@freescale.com>
2017Date: Wed Jan 23 16:31:00 2008 -0600
2018
2019 86xx: Rearrange the sequence in start.S
2020
2021 * split the BAT initialization so that only 2 BATs (for the boot page
2022 and stack) are programmed very early on. The rest are initialized later.
2023 * Move other BAT setup, ccsrbar setup, and law setup later in the code
2024 after translation has been enabled.
2025
2026 These changes will facilitate the moving of law and BAT initialization
2027 to C code, and will aid with 36-bit physical addressing support.
2028
2029 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2030
Wolfgang Denk0bc9efa2008-02-14 22:46:55 +01002031commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
2032Author: Wolfgang Denk <wd@denx.de>
2033Date: Wed Jan 23 14:41:37 2008 +0100
2034
2035 Coding Style Cleanup; update CHANGELOG
2036
2037 Signed-off-by: Wolfgang Denk <wd@denx.de>
2038
Wolfgang Denk33dac032008-01-23 14:41:37 +01002039commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
2040Author: Wolfgang Denk <wd@denx.de>
2041Date: Wed Jan 23 14:31:17 2008 +0100
2042
2043 Coding Style Cleanup; update CHANGELOG
2044
2045 Signed-off-by: Wolfgang Denk <wd@denx.de>
2046
Wolfgang Denk865f0f92008-01-23 14:31:17 +01002047commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
2048Author: Dave Liu <r63238@freescale.com>
2049Date: Fri Jan 18 10:07:04 2008 +0800
2050
2051 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
2052
2053 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
2054 cause the 83xx immap broken, so the DMA and PCI will
2055 be failed.
2056
2057 The patch fix the struct spi8xxx and rm struct spi83xx.
2058
2059 Signed-off-by: Dave Liu <daveliu@freescale.com>
2060 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2061
Wolfgang Denk33dac032008-01-23 14:41:37 +01002062commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
2063Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2064Date: Sat Apr 14 17:11:49 2007 +0200
2065
2066 AVR32: ATNGW100 board support
2067
2068 Add support for the ATNGW100 Network Gateway reference design,
2069 including flash, ethernet and MMC support.
2070
2071 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2072
2073commit e006927a0b9a54e8ee7685d8ac748aaad6801862
2074Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2075Date: Sat Nov 24 18:15:31 2007 +0100
2076
2077 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
2078
2079 I don't know why the relevant layers can't do this by itself, but this
2080 is what ppc does.
2081
2082 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2083
2084commit 799891ef7b1b3432032ec23466df6b665a797fa4
2085Author: Michael Schwingen <michael@schwingen.org>
2086Date: Fri Jan 18 00:04:28 2008 +0100
2087
2088 Add AcTux board support
2089
2090 Hi,
2091
2092 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
2093 files that
2094 contain changes for multiple boards, the board-specific files follow as
2095 separate patches.
2096
2097 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2098
2099commit 66a4344a4d910a11125df7768899ad529719855e
2100Author: Michael Schwingen <michael@schwingen.org>
2101Date: Wed Jan 16 19:53:23 2008 +0100
2102
2103 add AcTux-4 board support
2104
2105 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2106
2107commit bc24345e4101a5c996d6b48ce497b09c53025dc6
2108Author: Michael Schwingen <michael@schwingen.org>
2109Date: Wed Jan 16 19:51:55 2008 +0100
2110
2111 add AcTux-3 board support
2112
2113 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2114
2115commit aebf00fc4d1343b24715373893f7b20bf462d1e9
2116Author: Michael Schwingen <michael@schwingen.org>
2117Date: Wed Jan 16 19:51:14 2008 +0100
2118
2119 add AcTux-2 board support
2120
2121 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2122
2123commit ea99e8f05b7240fd657739e286664664ae160abe
2124Author: Michael Schwingen <michael@schwingen.org>
2125Date: Wed Jan 16 19:50:37 2008 +0100
2126
2127 add AcTux-1 board support
2128
2129 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2130
2131commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
2132Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2133Date: Mon Jan 14 19:20:08 2008 +0100
2134
2135 ARM: remove useless function board_post_init
2136
2137 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2138
2139commit 96bd462942022e4569b582c072a0ed26de1cd19b
2140Author: Michael Schwingen <michael@schwingen.org>
2141Date: Thu Jan 10 14:59:46 2008 +0100
2142
2143 IXP: enable RTS
2144
2145 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
2146 No handshaking is done, but the active RTS signal allows to
2147 connect to the target using a PC which is using RTS/CTS
2148 handshake, and does no harm if the PC is set to ignore RTS.
2149
2150 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2151
2152commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
2153Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2154Date: Mon Jan 7 08:41:34 2008 +0100
2155
2156 IXP: add dynamic microcode addr
2157
2158 allow to load the microde from flash or ram by download it through
2159 the serial or other.
2160
2161 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2162 Acked-by: Stefan Roese <sr@denx.de>
2163
2164commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
2165Author: Michael Schwingen <michael@schwingen.org>
2166Date: Sat Nov 10 15:44:12 2007 +0100
2167
2168 load ixp42x NPE firmware from separate flash block, remove dead code
2169
2170 Hi,
2171
2172 the following patch adds support to move the IXP42X NPE firmware to a
2173 separate flash block, whose start address is defined in
2174 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
2175 NPE-enabled u-boot without copyright problems due to the NPE firmware.
2176
2177 I hope the patch applies, I get whitespace-related differences in the NPE
2178 files due to trailing whitespace in the original versions.
2179
2180 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2181 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2182
Wolfgang Denk865f0f92008-01-23 14:31:17 +01002183commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
2184Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2185Date: Tue Jan 15 14:15:46 2008 -0600
2186
2187 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
2188
2189 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2190 Signed-off by: John Rigby <jrigby@freescale.com>
2191
2192commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
2193Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2194Date: Tue Jan 15 14:02:49 2008 -0600
2195
2196 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
2197
2198 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2199 Signed-off by: John Rigby <jrigby@freescale.com>
2200
2201commit 777d1abd9796f1c2e148417cc10657e847d318ce
2202Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2203Date: Tue Jan 15 14:00:25 2008 -0600
2204
2205 ColdFire: Add MCF547x_8x FEC driver
2206
2207 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2208 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2209 Signed-off by: John Rigby <jrigby@freescale.com>
2210
2211commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
2212Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2213Date: Tue Jan 15 13:54:09 2008 -0600
2214
2215 ColdFire: Add MCF547x_8x dma code and header files
2216
2217 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2218 Signed-off by: John Rigby <jrigby@freescale.com>
2219
2220commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
2221Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2222Date: Tue Jan 15 13:52:03 2008 -0600
2223
2224 ColdFire: Add MCF547x_8x dma code - 2
2225
2226 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2227 Signed-off by: John Rigby <jrigby@freescale.com>
2228
2229commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
2230Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2231Date: Tue Jan 15 13:48:52 2008 -0600
2232
2233 ColdFire: Add MCF547x_8x dma code - 1
2234
2235 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2236 Signed-off by: John Rigby <jrigby@freescale.com>
2237
2238commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
2239Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2240Date: Tue Jan 15 13:39:44 2008 -0600
2241
2242 ColdFire: Add MCF547x_8x related header files
2243
2244 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2245 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2246 Signed-off by: John Rigby <jrigby@freescale.com>
2247
2248commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
2249Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2250Date: Tue Jan 15 13:37:34 2008 -0600
2251
2252 ColdFire: Add MCF547x_8x cpu arch
2253
2254 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2255 Signed-off by: John Rigby <jrigby@freescale.com>
2256
2257commit e2756f4b54aba0e0523b81dd145666829cf7fd59
2258Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2259Date: Mon Jan 14 17:47:23 2008 -0600
2260
2261 ColdFire: Add MCF5227x cpu and M52277EVB support-3
2262
2263 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2264 Signed-off by: John Rigby <jrigby@freescale.com>
2265
2266commit c87581027994c148131b2f11aa75501f782ec19a
2267Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2268Date: Mon Jan 14 17:46:19 2008 -0600
2269
2270 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
2271
2272 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2273 Signed-off by: John Rigby <jrigby@freescale.com>
2274
2275commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
2276Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2277Date: Mon Jan 14 17:43:33 2008 -0600
2278
2279 ColdFire: Add MCF5227x cpu and M52277EVB support-1
2280
2281 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2282 Signed-off by: John Rigby <jrigby@freescale.com>
2283
2284commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
2285Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2286Date: Mon Jan 14 17:35:44 2008 -0600
2287
2288 ColdFire: Fix CFI Flash low level Read/Write macro
2289
2290 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2291 Signed-off by: John Rigby <jrigby@freescale.com>
2292
2293commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
2294Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2295Date: Mon Jan 14 17:23:08 2008 -0600
2296
2297 ColdFire: Add M5373EVB platform support - 2
2298
2299 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2300 Signed-off by: John Rigby <jrigby@freescale.com>
2301
2302commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
2303Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2304Date: Mon Jan 14 17:19:54 2008 -0600
2305
2306 ColdFire: Add M5373EVB platform support - 1
2307
2308 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2309 Signed-off by: John Rigby <jrigby@freescale.com>
2310
2311commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
2312Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2313Date: Mon Jan 14 17:17:03 2008 -0600
2314
2315 ColdFire: Update FlexBus CS for MCF532x
2316
2317 Definition update and change from 16bit to 32bit
2318
2319 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2320 Signed-off by: John Rigby <jrigby@freescale.com>
2321
2322commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
2323Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2324Date: Mon Jan 14 17:11:47 2008 -0600
2325
2326 ColdFire: PCI and misc updates for MCF5445x
2327
2328 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2329 Signed-off by: John Rigby <jrigby@freescale.com>
2330
2331commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
2332Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2333Date: Mon Jan 14 17:06:55 2008 -0600
2334
2335 ColdFire: MCF5445x header files cleanup
2336
2337 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2338 Signed-off by: John Rigby <jrigby@freescale.com>
2339
2340commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
2341Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2342Date: Mon Jan 14 16:59:42 2008 -0600
2343
2344 ColdFire: MCF532x header files cleanup
2345
2346 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2347 Signed-off by: John Rigby <jrigby@freescale.com>
2348
2349commit 7af7751d047e74b2ec58400f97b879c56446b3e8
2350Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2351Date: Mon Jan 14 15:30:15 2008 -0600
2352
2353 ColdFire: Add modules header files
2354
2355 Add CF specific modules header files
2356
2357 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2358 Signed-off-by: John Rigby <jrigby@freescale.com>
2359
2360commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
2361Author: Kim Phillips <kim.phillips@freescale.com>
2362Date: Thu Jan 17 12:48:00 2008 -0600
2363
2364 codingstyle cleanup for spi driver
2365
2366 ..and rm unused CONFIG_FSL_SPI define
2367
2368 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2369
2370commit d59feffb42c9f174116db7a82a311df98983dfce
2371Author: Haiying Wang <Haiying.Wang@freescale.com>
2372Date: Wed Jan 16 17:12:12 2008 -0500
2373
2374 FSL: Fix common EEPROM_data structure definition
2375
2376 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
2377 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
2378 bd->bi_ethaddr.
2379
2380 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2381
2382commit 6bee764bd6da510a4aad614880300c968bc7318d
2383Author: Timur Tabi <timur@freescale.com>
2384Date: Wed Jan 16 15:48:12 2008 -0600
2385
2386 86xx: enable command-line editing
2387
2388 Enable command-line editing for all MPC86xx boards.
2389
2390 Signed-off-by: Timur Tabi <timur@freescale.com>
2391
2392commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
2393Author: Ben Warren <biggerbadderben@gmail.com>
2394Date: Wed Jan 16 22:37:42 2008 -0500
2395
2396 Implement hard SPI driver on MPC8349EMDS
2397
2398 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
2399 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
2400
2401 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2402 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2403
2404commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
2405Author: Ben Warren <biggerbadderben@gmail.com>
2406Date: Wed Jan 16 22:37:35 2008 -0500
2407
2408 Add support for a Freescale non-CPM SPI controller
2409
2410 This patch adds support for the SPI controller found on Freescale PowerPC
2411 processors such as the MCP834x family. Additionally, a new config option,
2412 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
2413
2414 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2415 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2416
2417commit a8cb43a89be6cfd283257a603dd9841503ccce0f
2418Author: Dave Liu <r63238@freescale.com>
2419Date: Thu Jan 17 18:23:19 2008 +0800
2420
2421 mpc83xx: Fix the fatal conflict of merge
2422
2423 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
2424 will cause the mpc8315erdb board can't boot up.
2425
2426 The patch fix that bug, and remove the duplicated #ifdef
2427 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
2428 MPC8313E processor.
2429
2430 Signed-off-by: Dave Liu <daveliu@freescale.com>
2431 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2432
2433commit 3259eeaa4148125a81417477f62c05bd67f60587
2434Author: Larry Johnson <lrj@acm.org>
2435Date: Thu Jan 17 08:50:09 2008 -0500
2436
2437 Merge Sequoia beautification into Korat code
2438
2439 Signed-off-by: Larry Johnson <lrj@acm.org>
2440
2441commit e16925773211291b562e77187061e9dd1d757217
2442Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2443Date: Thu Jan 17 07:45:05 2008 +0100
2444
2445 net: add 'ethrotate' environment variable
2446
2447 [PATCH] net: add 'ethrotate' environment variable
2448
2449 This patch replaces the buildtime configuration option
2450 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
2451 configuration veriable. See README.
2452
2453 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2454 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2455
2456commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
2457Author: Stefan Roese <sr@denx.de>
2458Date: Thu Jan 17 14:29:04 2008 +0100
2459
2460 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
2461
2462 Signed-off-by: Stefan Roese <sr@denx.de>
2463
Wolfgang Denk33dac032008-01-23 14:41:37 +01002464commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
2465Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2466Date: Thu Jan 17 18:07:32 2008 +0900
2467
2468 sh: Remove CONFIG_COMMANDS from MS7720SE config file
2469
2470 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2471
Wolfgang Denk865f0f92008-01-23 14:31:17 +01002472commit 055606bd25e88c0cd04ad348a679a04b1b616bee
2473Author: Niklaus Giger <niklaus.giger@netstal.com>
2474Date: Wed Jan 16 18:39:20 2008 +0100
2475
2476 ppc4xx: Netstal HCU4 board: added various fixes and POST
2477
2478 - Moved some common code to netstal/common/nm_bsp.c.
2479 - sdram initialisation goes go netstal/common/fixed_sdram.c.
2480 - Added support for POST.
2481 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
2482
2483 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2484
2485commit 69b0634a4ee98c9791815600d43b99f626a952f3
2486Author: Niklaus Giger <niklaus.giger@netstal.com>
2487Date: Thu Jan 17 12:53:56 2008 +0100
2488
2489 ppc4xx: netstal/common define routines used by all boards
2490
2491 Added some routines used by all Netstal boards:
2492 - nm_bsp.c: - nm_show_print and
2493 - common_misc_init_r
2494 - set_params_for_sw_install. Very specific code to handle our SW
2495 installation procedure
2496 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
2497 to handle sdram initialization.
2498 - nm.h: Common header
2499
2500 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2501
2502commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
2503Author: Niklaus Giger <niklaus.giger@netstal.com>
2504Date: Wed Jan 16 18:39:18 2008 +0100
2505
2506 ppc4xx: Netstal HCU5 board: added various fixes and POST
2507
2508 - Moved some common code to nestal/common/nm_bsp.c.
2509 - Added support for the vxWorks EDR.
2510 - Enable trace for Lauterbach, if present.
2511 - Added support for POST.
2512 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
2513
2514 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2515
2516commit 4371090e5da77edc7bf9f296364db4801639d9c4
2517Author: Niklaus Giger <niklaus.giger@netstal.com>
2518Date: Wed Jan 16 18:39:08 2008 +0100
2519
2520 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
2521
2522 - Various fixes
2523 - Reduced rom_size from 384 to 320 kB
2524 - Environment is now in flash
2525 - Added POST
2526 - Support for OF
2527
2528 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2529
2530commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
2531Author: Niklaus Giger <niklaus.giger@netstal.com>
2532Date: Wed Jan 16 18:37:50 2008 +0100
2533
2534 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
2535
2536 - Various fixes
2537 - Reduced rom_size from 384 to 320 kB
2538 - Environment is now in flash
2539 - Added POST
2540 - Support for OF
2541
2542 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2543
2544commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
2545Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2546Date: Thu Jan 17 10:53:08 2008 +0100
2547
2548 ppc4xx: Complete DU440 board support
2549
2550 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2551
2552commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
2553Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2554Date: Thu Jan 17 10:52:30 2008 +0100
2555
2556 ppc4xx: Add DU440 board support
2557
2558 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2559
Wolfgang Denk33dac032008-01-23 14:41:37 +01002560commit ac331da07db3860f11fa1d0fd3db7c810bce1198
2561Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2562Date: Thu Jan 17 15:53:52 2008 +0900
2563
2564 sh: Update SuperH SCIF driver
2565
2566 This patch fixed wrong SH7720 CPU macro and changed macro that
2567 calculated value of SCBRR register.
2568
2569 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2570
Wolfgang Denk865f0f92008-01-23 14:31:17 +01002571commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
2572Author: Grzegorz Bernacki <gjb@semihalf.com>
2573Date: Wed Jan 16 15:12:47 2008 +0100
2574
2575 Set ips dividor to 1/4 of csb clock.
2576
2577 Previous setting cause ips clock to be out of spec. This bug was found by John
2578 Rigby from Freescale.
2579
2580 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2581
2582commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
2583Author: Kumar Gala <galak@kernel.crashing.org>
2584Date: Thu Jan 17 02:19:18 2008 -0600
2585
2586 85xx: Get ride of old TLB setup code
2587
2588 Now that all boards have been converted, remove old config code and the
2589 config option for the new style.
2590
2591 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2592
2593commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
2594Author: Kumar Gala <galak@kernel.crashing.org>
2595Date: Thu Jan 17 02:02:10 2008 -0600
2596
2597 85xx: Convert TQM85xx to new TLB setup
2598
2599 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2600
2601commit 74121b470c14f7eaf284ee838bffca6f9521069e
2602Author: Kumar Gala <galak@kernel.crashing.org>
2603Date: Thu Jan 17 01:56:32 2008 -0600
2604
2605 85xx: Convert STXGP3 & STXSSA to new TLB setup
2606
2607 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2608
2609commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
2610Author: Kumar Gala <galak@kernel.crashing.org>
2611Date: Thu Jan 17 01:44:34 2008 -0600
2612
2613 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
2614
2615 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2616
2617commit 818218bac6a11591e2542c344d2330e0f4e1968b
2618Author: Kumar Gala <galak@kernel.crashing.org>
2619Date: Thu Jan 17 01:31:34 2008 -0600
2620
2621 85xx: Convert PM854/PM856 to new TLB setup
2622
2623 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2624
2625commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
2626Author: Kumar Gala <galak@kernel.crashing.org>
2627Date: Thu Jan 17 01:25:33 2008 -0600
2628
2629 85xx: Convert MPC8540EVAL to new TLB setup
2630
2631 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2632
2633commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
2634Author: Kumar Gala <galak@kernel.crashing.org>
2635Date: Thu Jan 17 01:12:22 2008 -0600
2636
2637 85xx: Convert MPC8568 MDS to new TLB setup
2638
2639 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2640
2641commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
2642Author: Kumar Gala <galak@kernel.crashing.org>
2643Date: Thu Jan 17 01:01:09 2008 -0600
2644
2645 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
2646
2647 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2648
2649commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
2650Author: Kumar Gala <galak@kernel.crashing.org>
2651Date: Thu Jan 17 00:52:29 2008 -0600
2652
2653 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
2654
2655 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2656
2657commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
2658Author: Kumar Gala <galak@kernel.crashing.org>
2659Date: Thu Jan 17 00:32:17 2008 -0600
2660
2661 85xx: Convert ATUM8548 to new TLB setup
2662
2663 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2664
2665commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
2666Author: Kumar Gala <galak@kernel.crashing.org>
2667Date: Wed Jan 16 23:11:57 2008 -0600
2668
2669 85xx: Convert MPC8544 DS to new TLB setup
2670
2671 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2672
2673commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
2674Author: Kumar Gala <galak@kernel.crashing.org>
2675Date: Wed Jan 16 22:38:34 2008 -0600
2676
2677 85xx: Reworked initial processor init
2678
2679 Reworked the initial processor initialzation sequence:
2680 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
2681 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
2682 * Reworked initial asm code to do most of the core init before TLBs
2683
2684 The main reasons for these changes are to allow handling of 36-bit phys
2685 addresses in the future and some of the issues that will exist when we
2686 do that.
2687
2688 There are a few caveats on what can be initialized via the LAW and TLB
2689 static tables:
2690 * TLB entry 14/15 can't be initialized via the TLB table
2691 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
2692 the code that is currently executing.
2693
2694 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2695
2696commit 44a23cfd6360a68eaa41f945190618a55519eac3
2697Author: Kumar Gala <galak@kernel.crashing.org>
2698Date: Wed Jan 16 22:33:22 2008 -0600
2699
2700 85xx: Introduce new tlb API
2701
2702 Add a set of functions to manipulate TLB entries:
2703 * set_tlb() - write a tlb entry
2704 * invalidate_tlb() - invalidate a tlb array
2705 * disable_tlb() - disable a variable size tlb entry
2706 * init_tlbs() - setup initial tlbs based on static table
2707
2708 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2709
2710commit be88b1699863c262818f3af7f60173b4d48df8fc
2711Author: Stefan Roese <sr@denx.de>
2712Date: Thu Jan 17 07:50:17 2008 +0100
2713
2714 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
2715
2716 Signed-off-by: Stefan Roese <sr@denx.de>
2717
2718commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
2719Author: Kumar Gala <galak@kernel.crashing.org>
2720Date: Wed Jan 16 10:04:42 2008 -0600
2721
2722 85xx: Use proper defines for PCI addresses
2723
2724 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
2725 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
2726 be used for configuring the PCI ATMU.
2727
2728 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2729
2730commit 54a5070115eff38e9b324b78abdfa0b4520580b9
2731Author: Kumar Gala <galak@kernel.crashing.org>
2732Date: Wed Jan 16 09:22:29 2008 -0600
2733
2734 85xx: Remove old style of LAW init
2735
2736 All boards are now using the new fsl_law code so we can drop the old version.
2737
2738 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2739
2740commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
2741Author: Kumar Gala <galak@kernel.crashing.org>
2742Date: Wed Jan 16 09:15:29 2008 -0600
2743
2744 85xx: convert remaining 85xx boards over to use new LAW init code
2745
2746 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
2747 to use new LAW init code.
2748
2749 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2750
2751commit 572b13afc42710f2957c382a710360429c0e099b
2752Author: Kumar Gala <galak@kernel.crashing.org>
2753Date: Wed Jan 16 09:11:53 2008 -0600
2754
2755 85xx: convert STXGP3/STXSSA over to use new LAW init code
2756
2757 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2758
2759commit 45f2166ac0233a9263058378f39612bd11f61196
2760Author: Kumar Gala <galak@kernel.crashing.org>
2761Date: Wed Jan 16 09:06:48 2008 -0600
2762
2763 85xx: convert PM854/PM856 over to use new LAW init code
2764
2765 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2766
2767commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
2768Author: Kumar Gala <galak@kernel.crashing.org>
2769Date: Wed Jan 16 09:05:27 2008 -0600
2770
2771 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
2772
2773 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2774
2775commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
2776Author: Kumar Gala <galak@kernel.crashing.org>
2777Date: Wed Jan 16 01:45:10 2008 -0600
2778
2779 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
2780
2781 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2782
2783commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
2784Author: Kumar Gala <galak@kernel.crashing.org>
2785Date: Wed Jan 16 01:32:06 2008 -0600
2786
2787 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
2788
2789 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2790
2791commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
2792Author: Kumar Gala <galak@kernel.crashing.org>
2793Date: Wed Jan 16 01:16:16 2008 -0600
2794
2795 85xx: convert MPC8544 DS over to use new LAW init code
2796
2797 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2798
2799commit 83d40dfd79fe868796275802f60116d84b9e4395
2800Author: Kumar Gala <galak@kernel.crashing.org>
2801Date: Wed Jan 16 01:13:58 2008 -0600
2802
2803 85xx: Move LAW init code into C
2804
2805 Move the initialization of the LAWs into C code and provide an API
2806 to allow modification of LAWs after init.
2807
2808 Board code is responsible to provide a law_table and num_law_entries.
2809
2810 We should be able to use the same code on 86xx as well.
2811
2812 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2813
Wolfgang Denk33dac032008-01-23 14:41:37 +01002814commit bed8ce838a609aaab136d43b25e6df2a520bc854
2815Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2816Date: Sat Dec 22 15:03:12 2007 +0100
2817
2818 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
2819
2820 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2821
2822commit 0764c164fed6277d359cf132d55187ea34290114
2823Author: Vlad Lungu <vlad@comsys.ro>
2824Date: Wed Jan 16 19:27:51 2008 +0200
2825
2826 MIPS:Target support for qemu -M mips
2827
2828 With serial, NE2000, IDE support. Tested in big-endian mode.
2829 Memory size hard-coded to 128M for now, so don't play with
2830 the -m option.
2831
2832 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2833
Wolfgang Denk865f0f92008-01-23 14:31:17 +01002834commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
2835Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2836Date: Fri Jan 11 00:01:37 2008 +0100
2837
2838 Fix nfs command help to reflect that the serverip is optional
2839
2840 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2841 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2842
2843commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
2844Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2845Date: Mon Dec 10 22:32:14 2007 +0100
2846
2847 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
2848
2849 and move is_valid_ether_addr board file
2850
2851 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2852 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2853
2854commit c2f896b8fc4722e36915903e1942e138e68ce804
2855Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2856Date: Wed Jan 16 16:13:31 2008 +0900
2857
2858 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
2859
2860 rx_status on the memory is basically in LE, but needs to be handled in CPU
2861 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
2862 it'll work fine.
2863
2864 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2865 Cc: Masami Komiya <mkomiya@sonare.it>
2866 Cc: Lucas Jin <lucasjin@gmail.com>
2867 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2868
2869commit 96a236746fe6a7b84802afb4ed31536696d34812
2870Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2871Date: Wed Jan 16 16:12:26 2008 +0900
2872
2873 drivers/net/rtl8139.c: Fix cache coherency issues
2874
2875 Current driver is meant for cache coherent systems. This patch adds
2876 flush_cache() routines to support cache non-coherent systems.
2877
2878 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2879 Cc: Masami Komiya <mkomiya@sonare.it>
2880 Cc: Lucas Jin <lucasjin@gmail.com>
2881 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2882
2883commit d1276c76c1e2b5035296689280ba1acb2c425104
2884Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2885Date: Wed Jan 16 16:11:14 2008 +0900
2886
2887 drivers/net/rtl8139.c: Fix tx timeout
2888
2889 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
2890 does, the condition "(currticks() < to)" becomes invalid and immediately
2891 leads to tx timeout error. This patch introduces the fine-graded udely(10)
2892 loops to ease the impact of wrapping around.
2893
2894 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2895 Cc: Masami Komiya <mkomiya@sonare.it>
2896 Cc: Lucas Jin <lucasjin@gmail.com>
2897 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2898
2899commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
2900Author: Dave Liu <r63238@freescale.com>
2901Date: Fri Jan 11 18:45:28 2008 +0800
2902
2903 TSEC: Add the support for RealTek RTL8211B PHY
2904
2905 Add the support of RealTek RTL8211B PHY, the RTL8211B
2906 PHY only supports RGMII and MII mode.
2907
2908 Signed-off-by: Dave Liu <daveliu@freescale.com>
2909 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2910
2911commit 84a3047b72b70e862b0b7a8e2058077457f89a32
2912Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2913Date: Wed Jan 16 09:40:41 2008 +0100
2914
2915 Remove annoying debug printout for PHY less boards.
2916
2917 PHY less board prints out lots of "read wrong ...":
2918 read wrong value : mii_id 3,mii_reg 2, base e0102320
2919 read wrong value : mii_id 3,mii_reg 3, base e0102320
2920 UEC: PHY is Generic MII (ffffffff)
2921 read wrong value : mii_id 3,mii_reg 4, base e0102320
2922 read wrong value : mii_id 3,mii_reg 0, base e0102320
2923 read wrong value : mii_id 3,mii_reg 1, base e0102320
2924 read wrong value : mii_id 3,mii_reg 1, base e0102320
2925 read wrong value : mii_id 3,mii_reg 5, base e0102320
2926 read wrong value : mii_id 3,mii_reg 1, base e0102320
2927 read wrong value : mii_id 3,mii_reg 1, base e0102320
2928 read wrong value : mii_id 3,mii_reg 5, base e0102320
2929 FSL UEC0: Full Duplex
2930 FSL UEC0: Speed 100BT
2931 FSL UEC0: Link is up
2932 Using FSL UEC0 device
2933
2934 Make this printout depend on UEC_VERBOSE_DEBUG and
2935 remove its definition in uec_phy.c
2936
2937 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2938 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2939
2940commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
2941Author: Kim Phillips <kim.phillips@freescale.com>
2942Date: Tue Jan 15 14:11:00 2008 -0600
2943
2944 net: reduce boot latency on QE UEC based boards
2945
2946 actually polling for PHY autonegotiation to finish enables us to remove the
2947 5 second boot prompt latency present on QE based boards.
2948
2949 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
2950 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
2951 code shamelessly stolen from tsec driver.
2952
2953 also rm unused CONFIG_RMII_MODE code.
2954
2955 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2956 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2957 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2958
2959commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
2960Author: michael.firth@bt.com <michael.firth@bt.com>
2961Date: Wed Jan 16 11:40:51 2008 +0000
2962
2963 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
2964
2965 The current TSEC driver limits MDIO access to the devices that have been configured as attached
2966 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
2967
2968 Signed-off-by: Michael Firth <michael.firth@bt.com>
2969 Acked-by: Andy Fleming <afleming@freescale.com>
2970 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2971
2972commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
2973Author: Kim Phillips <kim.phillips@freescale.com>
2974Date: Wed Jan 16 00:38:05 2008 -0600
2975
2976 Add support for the MPC837xERDB
2977
2978 MPC837xERDB board support includes:
2979 * DDR2 330MHz hardcoded (soldered on the board)
2980 * Local Bus NOR Flash
2981 * I2C, UART and RTC
2982 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
2983 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
2984 * load)
2985
2986 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
2987 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
2988 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2989
2990commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
2991Author: Kim Phillips <kim.phillips@freescale.com>
2992Date: Wed Jan 16 12:06:16 2008 -0600
2993
2994 mpc83xx: add support for more system clock performance controls
2995
2996 System registers that are modified are the Arbiter Configuration
2997 Register (ACR), the System Priority Control Register (SPCR), and the
2998 System Clock Configuration Register (SCCR).
2999
3000 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
3001 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
3002 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3003
3004commit 16c3cde050e2d243e62b37486f1558570787beb8
3005Author: James Yang <james.yang@freescale.com>
3006Date: Wed Jan 16 11:58:08 2008 -0600
3007
3008 FSL: Generalize PIXIS reset command parsing.
3009
3010 Before, the order of arguments to the pixis_reset
3011 command needed to be supplied in a hard-coded order.
3012 Generalize the command parsing to allow any order.
3013
3014 Signed-off-by: James Yang <james.yang@freescale.com>
3015 Acked-by: Jon Loeliger <jdl@freescale.com>
3016
3017commit ad8f8687b78c3e917b173f038926695383c55555
3018Author: Jon Loeliger <jdl@freescale.com>
3019Date: Tue Jan 15 13:42:41 2008 -0600
3020
3021 FSL: Convert board/freescale/common/Makefile to use CONFIG_
3022
3023 Convert the board/freescale/common/Makefile to use
3024 CONFIG_* options to select which files to conditionally
3025 compile into the board/freescale/common library rather
3026 than conditionally compiling entire files.
3027
3028 Now handles::
3029 CONFIG_FSL_PIXIS
3030 CONFIG_FSL_DIU_FB
3031 CONFIG_PQ_MDS_PIB
3032
3033 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
3034
3035 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3036
3037commit 7c2221eb230372a9e537c4f6636b147b0909325f
3038Author: Roy Zang <tie-fei.zang@freescale.com>
3039Date: Tue Jan 15 16:38:38 2008 +0800
3040
3041 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
3042
3043 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
3044 Remove unused ethernet CONFIG_ options.
3045
3046 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3047 Acked-by: Jon Loeliger <jdl@freescale.com>
3048
3049commit 711a7946277d2e29af481011e8635e9975c54e45
3050Author: Kim Phillips <kim.phillips@freescale.com>
3051Date: Tue Jan 15 14:05:14 2008 -0600
3052
3053 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
3054
3055 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
3056
3057 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3058
3059commit 363eea9ff7f19a2cba17f262bd17559f166e134e
3060Author: Kim Phillips <kim.phillips@freescale.com>
3061Date: Tue Jan 15 09:51:12 2008 -0600
3062
3063 mpc83xx: clean up mpc8360emds.c warnings
3064
3065 mpc8360emds.c: In function 'ft_board_setup':
3066 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
3067 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
3068 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
3069 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
3070 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
3071 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
3072
3073 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3074
3075commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
3076Author: Kim Phillips <kim.phillips@freescale.com>
3077Date: Mon Jan 14 16:14:46 2008 -0600
3078
3079 mpc83xx: fix phy-connection-type fixup code
3080
3081 use tree passed to us in local blob, not global fdt.
3082
3083 Also use fdt_path_offset to convert to relative offset, since absolute
3084 reference is needed to check for rgmii-id mode string value.
3085
3086 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3087
3088commit 2b4c952be7c4357a13e839d48df80853820c33eb
3089Author: Kumar Gala <galak@kernel.crashing.org>
3090Date: Mon Jan 14 09:01:40 2008 -0600
3091
3092 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
3093
3094 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3095 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3096
3097commit e1d8ed2c08da14b168658cc5fa78529d461aea70
3098Author: Poonam Aggrwal <b10812@freescale.com>
3099Date: Mon Jan 14 09:41:14 2008 +0530
3100
3101 Changes in uboot DDR configuration for MPC8313eRDB
3102
3103 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
3104 DDR configuration in u-boot code. Some are related to performance, some
3105 affect stability and some correct few basic errors in the current
3106 configuration.
3107
3108 The changes have been tested and found to give better memory latency
3109 figures on MPC8313eRDB.LMBench figures prove it.
3110
3111 The changes are:
3112
3113 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
3114 (this may improve performance for application with many read
3115 or write to open pages).
3116 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
3117 001 (activating all the CS when only one is used may cause
3118 unwanted noise on the system)
3119
3120 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
3121 Tras=45ns)
3122 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
3123
3124 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
3125 comply with the 3 ODT clk requirements)
3126 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
3127 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
3128
3129 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
3130 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
3131
3132 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
3133 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
3134
3135 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
3136 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
3137
3138 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
3139 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
3140 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
3141 Cc: Josep P J <PJ.Joseph@freescale.com>
3142 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3143
3144commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
3145Author: Jerry Van Baren <gvb.uboot@gmail.com>
3146Date: Sat Jan 12 13:24:14 2008 -0500
3147
3148 Enable the isdram command on the MPC8360EMDS board
3149
3150 The isdram command prints out decoded information the "serial presence
3151 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
3152 debugging memory configuration problems.
3153
3154 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3155 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3156
3157commit 8bd522ce4afda3d4868ee8c913f5394094326be1
3158Author: Dave Liu <r63238@freescale.com>
3159Date: Fri Jan 11 18:48:24 2008 +0800
3160
3161 mpc83xx: Add the support for MPC8315ERDB board
3162
3163 The features list:
3164 - Boot from NOR Flash
3165 - DDR2 266MHz hardcoded configuration
3166 - Local bus NOR Flash R/W operation
3167 - I2C, UART, MII and RTC
3168 - eTSEC0/1 support
3169 - PCI host
3170
3171 Signed-off-by: Dave Liu <daveliu@freescale.com>
3172 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3173
3174commit b05884efa614e4d8a9413158fc228e0dc02ab704
3175Author: Dave Liu <r63238@freescale.com>
3176Date: Fri Jan 11 18:46:50 2008 +0800
3177
3178 mpc83xx: Add config of eTSEC emergency priority in SPCR
3179
3180 The TSEC emergency priority definition of 831x/837x
3181 is different than the definition of 834x in SPCR register.
3182
3183 Add the other config of TSEC emergency priority into
3184 cpu_init.c
3185
3186 Signed-off-by: Dave Liu <daveliu@freescale.com>
3187 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3188
3189commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
3190Author: Dave Liu <r63238@freescale.com>
3191Date: Fri Jan 11 18:42:19 2008 +0800
3192
3193 mpc83xx: Remove cache config from MPC8360ERDK.h
3194
3195 The MPC8360ERDK board support patch is added before
3196 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
3197 so, miss clean up it.
3198
3199 The patch clean up the miss cache config.
3200
3201 Signed-off-by: Dave Liu <daveliu@freescale.com>
3202 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3203
3204commit cd9d23053d435c08fc8695017b5cb9003fcda786
3205Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3206Date: Mon Jan 14 23:09:32 2008 +0300
3207
3208 nand: FSL UPM NAND driver
3209
3210 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3211
3212commit 6cb2239ae76faee64434286c4f8fc71374702dd2
3213Author: Kyungmin Park <kmpark@infradead.org>
3214Date: Tue Jan 15 08:59:44 2008 +0900
3215
3216 OneNAND: Separate U-Boot dependent code from OneNAND
3217
3218 OneNAND: Separate U-Boot dependent code from OneNAND
3219
3220 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3221
3222commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
3223Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3224Date: Wed Jan 16 10:33:46 2008 +0100
3225
3226 ppc4xx: Sequoia coding style cleanup and beautification
3227
3228 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3229
3230commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
3231Author: Larry Johnson <lrj@acm.org>
3232Date: Tue Jan 15 14:35:58 2008 -0500
3233
3234 ppc4xx: Refactor ECC POST for AMCC Denali core
3235
3236 The ECC POST reported intermittent failures running after power-up on
3237 the Korat PPC440EPx board. Even when the test passed, the debugging
3238 output occasionally reported additional unexpected ECC errors.
3239
3240 This refactoring has three main objectives: (1) minimize the code
3241 executed with ECC enabled during the tests, (2) add more checking of the
3242 results so any unexpected ECC errors would cause the test to fail, and
3243 (3) use synchronization (only) where required by the processor.
3244
3245 Signed-off-by: Larry Johnson <lrj@acm.org>
3246
3247commit 2465665b73ac2f688af945b1ed510752afa816a4
3248Author: David Saada <David.Saada@ecitele.com>
3249Date: Tue Jan 15 10:40:24 2008 +0200
3250
3251 QE UEC: Extend number of supported UECs to 4
3252
3253 This patch extends the number of supported UECs to 4. Note that the
3254 problem of QE thread resources exhaustion is resolved by setting the
3255 correct number of QE threads according to Ethernet type (GBE or FE).
3256
3257 Signed-off-by: David Saada <david.saada@ecitele.com>
3258 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3259
3260commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
3261Author: Wolfgang Denk <wd@denx.de>
3262Date: Wed Jan 16 00:01:01 2008 +0100
3263
3264 LWMON5: enable hush shell as command line parser
3265
3266 Signed-off-by: Wolfgang Denk <wd@denx.de>
3267
3268commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
3269Author: Wolfgang Denk <wd@denx.de>
3270Date: Tue Jan 15 17:22:28 2008 +0100
3271
3272 ADS5121: disable watchdog; enable image timestamps
3273
3274 Signed-off-by: Wolfgang Denk <wd@denx.de>
3275
3276commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
3277Author: Wolfgang Denk <wd@denx.de>
3278Date: Tue Jan 15 17:21:28 2008 +0100
3279
3280 TK885D: fixes for bigger flash sector sizes on new modules;
3281 adjust default environment;
3282 disable SCC ethernet (not used on this board).
3283
3284 Signed-off-by: Wolfgang Denk <wd@denx.de>
3285
3286commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
3287Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3288Date: Tue Jan 15 17:48:13 2008 +0900
3289
3290 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
3291
3292 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3293
3294commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
3295Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3296Date: Tue Jan 15 23:25:25 2008 +0900
3297
3298 sh: Add support SH7710/SH7712
3299
3300 SH7710/SH7712 of SH3 CPU are supported.
3301 SH771X is called SH-Ether, and has the Ether controller in CPU.
3302 The driver of Ether is not included in this patch.
3303
3304 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3305
3306commit 63a11be68306870e04d3851ed9fa41955cdf4894
3307Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3308Date: Tue Jan 15 23:06:17 2008 +0900
3309
3310 sh: Add support of map_physmem() and unmap_physmem() to SuperH
3311
3312 This patch add the support of map_physmem() and unmap_physmem()
3313 used with Common Flash Interface(CFI) driver.
3314
3315 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3316
3317commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
3318Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3319Date: Wed Jan 9 14:42:27 2008 +0900
3320
3321 sh: Add maintainer of MS7720SE to the MAINTAINER file
3322
3323 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3324
3325commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
3326Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3327Date: Wed Jan 9 14:39:58 2008 +0900
3328
3329 sh: Fix board name in MS7720SE's config.mk
3330
3331 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3332
3333commit c0a04d93734d768b39dbb72fb501b65614c8615d
3334Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3335Date: Wed Jan 9 14:37:36 2008 +0900
3336
3337 sh: Add MS7720SE to MAKEALL
3338
3339 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3340
3341commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
3342Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3343Date: Mon Dec 3 22:58:50 2007 +0900
3344
3345 sh: Add support for MS7720RP02 board
3346
3347 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3348 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3349 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3350
3351commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
3352Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3353Date: Wed Jan 9 14:30:02 2008 +0900
3354
3355 sh: Add support for SH7720 in serial_sh driver.
3356
3357 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3358 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3359 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3360
3361commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
3362Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3363Date: Mon Dec 3 22:58:45 2007 +0900
3364
3365 sh: Add support SH3 and SH7720
3366
3367 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3368 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3369 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3370
3371commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
3372Author: Stefan Roese <sr@denx.de>
3373Date: Tue Jan 15 10:11:02 2008 +0100
3374
3375 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
3376
3377 Signed-off-by: Stefan Roese <sr@denx.de>
3378
3379commit 17bef68097ab3692500a36fb31115bff7910aa99
3380Author: Niklaus Giger <niklausgiger@gmx.ch>
3381Date: Mon Jan 14 14:04:42 2008 +0100
3382
3383 ppc_4xx: Fix post spr.c for PPC405
3384
3385 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
3386 for PPC440 and derivates processor.
3387
3388 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3389
3390commit 06c428bcd4413014b43236e77765022071424fa6
3391Author: Dave Liu <r63238@freescale.com>
3392Date: Mon Jan 14 11:12:01 2008 +0800
3393
3394 QE: fix compile warning
3395
3396 qe.c: In function 'qe_upload_firmware':
3397 qe.c:390: warning: pointer targets in passing argument 2
3398 uec.c: In function 'uec_initialize':
3399 uec.c:1236: warning: 'uec_info' may be used uninitialized
3400
3401 Signed-off-by: Dave Liu <daveliu@freescale.com>
3402
3403commit a0dd99d51efa55fe023e19c97ead92683725eb11
3404Author: Stefan Roese <sr@denx.de>
3405Date: Mon Jan 14 10:05:05 2008 +0100
3406
3407 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
3408
3409 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
3410 to remove the USB PHY reset after powerup. The CPLD will keep the
3411 USB PHY in reset (active low) until the bit is set to 1 in
3412 board_early_init_f().
3413
3414 Signed-off-by: Stefan Roese <sr@denx.de>
3415
3416commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
3417Author: Wolfgang Denk <wd@denx.de>
3418Date: Sun Jan 13 23:26:45 2008 +0100
3419
3420 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
3421
3422 Signed-off-by: Wolfgang Denk <wd@denx.de>
3423
3424commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
3425Author: Wolfgang Denk <wd@denx.de>
3426Date: Sun Jan 13 23:37:50 2008 +0100
3427
3428 ADS5121: Fix typo in ads5121.c, adjust default environment
3429
3430 Signed-off-by: Wolfgang Denk <wd@denx.de>
3431
3432commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
3433Author: John Rigby <jrigby@freescale.com>
3434Date: Fri Aug 24 18:18:43 2007 -0600
3435
3436 ADS5121: MAX slew rate for PATA pins
3437
3438 Signed-off-by: John Rigby <jrigby@freescale.com>
3439
3440commit dd531aac34aaad138f16cacdb51d61908d59c0e2
3441Author: Wolfgang Denk <wd@denx.de>
3442Date: Sun Jan 13 21:05:52 2008 +0100
3443
3444 Fix Makefile dependency problem with parallel builds.
3445
3446 Signed-off-by: Wolfgang Denk <wd@denx.de>
3447
3448commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
3449Author: Wolfgang Denk <wd@denx.de>
3450Date: Sun Jan 13 19:51:39 2008 +0100
3451
3452 MPC8544DS: fix board Makefile for silent build (with -s)
3453
3454 Signed-off-by: Wolfgang Denk <wd@denx.de>
3455
3456commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
3457Author: Wolfgang Denk <wd@denx.de>
3458Date: Sun Jan 13 16:44:08 2008 +0100
3459
3460 PMC440 board: fix board Makefile for out-of-tree building
3461
3462 Signed-off-by: Wolfgang Denk <wd@denx.de>
3463
3464commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
3465Author: Wolfgang Denk <wd@denx.de>
3466Date: Sun Jan 13 16:07:44 2008 +0100
3467
3468 Makalu: fix compile warning
3469
3470 Signed-off-by: Wolfgang Denk <wd@denx.de>
3471
3472commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
3473Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3474Date: Sun Jan 13 12:36:12 2008 +0100
3475
3476 cmd_nand : fix compiler warning.
3477
3478 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3479
3480commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
3481Author: Michael Schwingen <rincewind@discworld.dascon.de>
3482Date: Sat Jan 12 20:29:47 2008 +0100
3483
3484 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
3485
3486 Signed-off-by: Michael Schwingen <michael@schwingen.org>
3487 Acked-by: Stefan Roese <sr@denx.de>
3488
3489commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
3490Author: Wolfgang Denk <wd@denx.de>
3491Date: Sun Jan 13 02:19:44 2008 +0100
3492
3493 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
3494
3495 Signed-off-by: Wolfgang Denk <wd@denx.de>
3496
3497commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
3498Author: Wolfgang Denk <wd@denx.de>
3499Date: Sun Jan 13 02:19:13 2008 +0100
3500
3501 MPC8xx FEC driver: fix compiler warning.
3502
3503 Signed-off-by: Wolfgang Denk <wd@denx.de>
3504
3505commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
3506Author: Wolfgang Denk <wd@denx.de>
3507Date: Sun Jan 13 00:59:21 2008 +0100
3508
3509 Fix Makefile dependencies issues; allow silent build
3510
3511 - get rid of "version" target whichdidn't really work
3512 - make autoconf.mk depend on version_autogenerated.h to make sure
3513 to rebuild files as needed
3514 - add XECHO macro to allow for silent build using "make -s"
3515
3516 Signed-off-by: Wolfgang Denk <wd@denx.de>
3517
3518commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
3519Author: Wolfgang Denk <wd@denx.de>
3520Date: Sun Jan 13 00:55:47 2008 +0100
3521
3522 ADS5121e: fix compile warning
3523
3524 Signed-off-by: Wolfgang Denk <wd@denx.de>
3525
3526commit f2b6f4610627fe3d607620e25082916a01538875
3527Author: Wolfgang Denk <wd@denx.de>
3528Date: Sun Jan 13 00:55:18 2008 +0100
3529
3530 MUNICes: fix board Makefile for remote build directory
3531
3532 Signed-off-by: Wolfgang Denk <wd@denx.de>
3533
3534commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
3535Author: Oliver Weber <almoeli@gmx.de>
3536Date: Wed Jan 9 17:04:38 2008 +0100
3537
3538 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
3539
3540 Signed-off-by: Oliver Weber <almoeli@gmx.de>
3541
3542commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
3543Author: Andreas Engel <andreas.engel@ericsson.com>
3544Date: Wed Jan 9 17:10:56 2008 +0100
3545
3546 Make bootretry work when command line editing is enabled
3547
3548 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
3549 This patch fixes the problem.
3550
3551 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
3552
3553commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
3554Author: Larry Johnson <lrj@acm.org>
3555Date: Fri Jan 11 23:26:18 2008 -0500
3556
3557 Refactor code for "i2c sdram" command
3558
3559 Signed-off-by: Larry Johnson <lrj@acm.org>
3560
3561commit 0df6b8446c4721b91ce311548114891130371083
3562Author: Larry Johnson <lrj@acm.org>
3563Date: Thu Jan 10 22:23:39 2008 -0500
3564
3565 Fix "i2c sdram" command for DDR2 DIMMs
3566
3567 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
3568 "i2c sdram" command. This patch provides correct alternative
3569 interpretations when DDR2 memory is detected.
3570
3571 Signed-off-by: Larry Johnson <lrj@acm.org>
3572
3573commit 64134f011254123618798ff77c42ba196b2ec485
3574Author: Wolfgang Denk <wd@denx.de>
3575Date: Sat Jan 12 20:31:39 2008 +0100
3576
3577 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
3578
3579 With recent toolchain versions, some boards would not build because
3580 or errors like this one (here for ocotea board when building with
3581 ELDK 4.2 beta):
3582 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
3583
3584 For many boards, the .bss section is big enough that it wraps around
3585 at the end of the address space (0xFFFFFFFF), so the problem will not
3586 be visible unless you use a 64 bit tool chain for development. On
3587 some boards however, changes to the code size (due to different
3588 optimizations) we bail out with section overlaps like above.
3589
3590 The fix is to add the NOLOAD attribute to the .bss and .sbss
3591 sections, telling the linker that .bss does not consume any space in
3592 the image.
3593
3594 Signed-off-by: Wolfgang Denk <wd@denx.de>
3595
3596commit 3afac79ec27b91df185f090b31dad9620779f440
3597Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3598Date: Fri Jan 11 20:42:58 2008 -0600
3599
3600 USB: Add Philips 1561 PCI-OHCI ids
3601 (needed for M5475EVB)
3602
3603 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3604
3605commit 5e8def6731cd7bec74bff42a16b139de04010353
3606Author: Wolfgang Denk <wd@denx.de>
3607Date: Sat Jan 12 15:51:34 2008 +0100
3608
3609 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
3610 boards.
3611
3612 Signed-off-by: Heiko Schocher <hs@denx.de>
3613 Signed-off-by: Wolfgang Denk <wd@denx.de>
3614
3615commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
3616Author: Grzegorz Bernacki <gjb@semihalf.com>
3617Date: Fri Jan 11 12:03:43 2008 +0100
3618
3619 MPC512X: Cleanup bus clock names.
3620
3621 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3622
3623commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
3624Author: Grzegorz Bernacki <gjb@semihalf.com>
3625Date: Tue Jan 8 17:16:59 2008 +0100
3626
3627 MPC512X: Fixed typo in macro name.
3628
3629 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3630
3631commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
3632Author: Grzegorz Bernacki <gjb@semihalf.com>
3633Date: Tue Jan 8 17:16:15 2008 +0100
3634
3635 ads5121: Added support for FDT.
3636
3637 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3638
3639commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
3640Author: Wolfgang Denk <wd@denx.de>
3641Date: Sat Jan 12 01:05:50 2008 +0100
3642
3643 Coding Style cleanup; update CHANGELOG.
3644
3645 Signed-off-by: Wolfgang Denk <wd@denx.de>
3646
Wolfgang Denka10ff912008-01-12 01:05:50 +01003647commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
3648Author: Heiko Schocher <hs@denx.de>
3649Date: Fri Jan 11 15:15:17 2008 +0100
3650
3651 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
3652
3653 Signed-off-by: Timur Tabi <timur@freescale.com>
3654 Signed-off-by: Heiko Schocher <hs@denx.de>
3655
3656commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
3657Author: Heiko Schocher <hs@denx.de>
3658Date: Fri Jan 11 15:15:16 2008 +0100
3659
3660 MUNICes: Set the right CFG_DEFAULT_MBAR value.
3661
3662 Signed-off-by: Heiko Schocher <hs@denx.de>
3663
3664commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
3665Author: Heiko Schocher <hs@denx.de>
3666Date: Fri Jan 11 15:15:15 2008 +0100
3667
3668 added the config File for the MUNICes board.
3669
3670 Signed-off-by: Heiko Schocher <hs@denx.de>
3671
3672commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
3673Author: Heiko Schocher <hs@denx.de>
3674Date: Fri Jan 11 15:15:14 2008 +0100
3675
3676 added basic support for the MUNICes board.
3677
3678 Signed-off-by: Heiko Schocher <hs@denx.de>
3679
3680commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
3681Author: Wolfgang Denk <wd@denx.de>
3682Date: Sat Jan 12 00:39:37 2008 +0100
3683
3684 Update CHANGELOG and MAINTAINERS files.
3685
3686 Signed-off-by: Wolfgang Denk <wd@denx.de>
3687
Wolfgang Denk3bb77fb2008-01-12 00:39:37 +01003688commit 5ba7390c3cb579172be66888a371707b47b5be4e
3689Author: Anatolij Gustschin <agust@denx.de>
3690Date: Fri Jan 11 02:15:02 2008 +0100
3691
3692 Fix compilation problem in common/cmd_bmp.c
3693
3694 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
3695 isn't defined. This patch fix this.
3696
3697 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3698
3699commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
3700Author: Heiko Schocher <hs@denx.de>
3701Date: Fri Jan 11 01:12:09 2008 +0100
3702
3703 Fix defaultconfig for the mgcoge board.
3704
3705 Signed-off-by: Heiko Schocher <hs@denx.de>
3706
3707commit ac9db066b26935f31bff15c98168b19faeb603f3
3708Author: Heiko Schocher <hs@denx.de>
3709Date: Fri Jan 11 01:12:08 2008 +0100
3710
3711 Added support for the mgcoge board from keymile.
3712
3713 Signed-off-by: Heiko Schocher <hs@denx.de>
3714
3715commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
3716Author: Heiko Schocher <hs@denx.de>
3717Date: Fri Jan 11 01:12:07 2008 +0100
3718
3719 Enable SMC microcode relocation patch for SMC1.
3720
3721 Signed-off-by: Heiko Schocher <hs@denx.de>
3722
3723commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
3724Author: Heiko Schocher <hs@denx.de>
3725Date: Fri Jan 11 01:12:06 2008 +0100
3726
3727 Added support for the mgsuvd board from keymile.
3728
3729 Signed-off-by: Heiko Schocher <hs@denx.de>
3730
3731commit bf05293973b348f6946c9df92cd3c65ece42d0be
3732Author: James Yang <james.yang@freescale.com>
3733Date: Thu Jan 10 16:02:07 2008 -0600
3734
3735 Fix 64-bit vsprintf.
3736
3737 There were some size and unsigned problems.
3738 Also add support for "ll" size modifier in format string like glibc
3739
3740 Signed-off-by: James Yang <James.Yang@freescale.com>
3741 Acked-by: Jon Loeliger <jdl@freescale.com>
3742
3743commit 92fa37eac530860643afa26ae347af3d23d67309
3744Author: Larry Johnson <lrj@acm.org>
3745Date: Wed Jan 9 12:42:35 2008 -0500
3746
3747 Remove superfluous preprocessor conditionals from LM73 driver
3748
3749 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
3750
3751 (2) Use conditional Makefile.o.
3752
3753 Signed-off-by: Larry Johnson <lrj@acm.org>
3754
3755commit efc6f447c1b940d1650c4b854c5598a595ddc3da
3756Author: Guennadi Liakhovetski <lg@denx.de>
3757Date: Thu Jan 10 17:59:07 2008 +0100
3758
3759 Add support for the TK885D baseboard from TELE-DATA
3760
3761 The TK885D board uses a TQM885D module from TQ, this port adds an
3762 own configuration file and adds a last_stage_init() method to
3763 configure the two PHYs, depending on the phy_auto_nego environment
3764 variable.
3765
3766 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3767
3768commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
3769Author: Kumar Gala <galak@kernel.crashing.org>
3770Date: Thu Jan 10 02:22:05 2008 -0600
3771
3772 Fix compiler warning
3773
3774 main.c: In function 'readline_into_buffer':
3775 main.c:927: warning: unused variable 'p_buf'
3776
3777 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3778
3779commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
3780Author: Anatolij Gustschin <agust@denx.de>
3781Date: Fri Jan 11 14:30:01 2008 +0100
3782
3783 Add Fujitsu CoralP/Lime video driver
3784
3785 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3786 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
3787
3788commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
3789Author: Anatolij Gustschin <agust@denx.de>
3790Date: Fri Jan 11 02:39:47 2008 +0100
3791
3792 Fix video console newline and carriage return handling
3793
3794 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
3795 are not displayed correctly. This is an attempt to fix
3796 this issue. Also add carriage return handling.
3797
3798 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3799 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
3800
3801commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
3802Author: Stefan Roese <sr@denx.de>
3803Date: Fri Jan 11 15:53:58 2008 +0100
3804
3805 ppc4xx: Fix sdram init on Sequoia boards
3806
3807 Clear possible errors in MCSR resulting from data-eye-search.
3808 If not done, then we could get an interrupt later on when
3809 exceptions are enabled.
3810
3811 Signed-off-by: Stefan Roese <sr@denx.de>
3812
3813commit d610a60730b7464f6f659db49d264d89a7c71061
3814Author: Anatolij Gustschin <agust@denx.de>
3815Date: Fri Jan 11 15:31:09 2008 +0100
3816
3817 ppc4xx: Rework Lime support for lwmon5
3818
3819 Rework Lime support for lwmon5 using new video driver
3820
3821 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3822
3823commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
3824Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3825Date: Fri Jan 11 14:55:16 2008 +0100
3826
3827 ppc4xx: Update PMC440 config file
3828
3829 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3830
3831commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
3832Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3833Date: Fri Jan 11 14:55:08 2008 +0100
3834
3835 ppx4xx: Fix sdram init on PMC440 boards
3836
3837 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3838
3839commit 061aad4d320dddce26247699dcf2875ee2ea1366
3840Author: Dave Liu <r63238@freescale.com>
3841Date: Thu Jan 10 23:09:33 2008 +0800
3842
3843 mpc83xx: Fix the bug of 266MHz data rate DDR
3844
3845 The DDR doesn't work on the 266MHz data rate,
3846 the patch fix the bug.
3847
3848 Signed-off-by: Dave Liu <daveliu@freescale.com>
3849 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3850
3851commit ded08317ad9e340b887bf2eb46e9565a0f610a93
3852Author: Dave Liu <r63238@freescale.com>
3853Date: Thu Jan 10 23:08:26 2008 +0800
3854
3855 mpc83xx: Make the code more readable
3856
3857 Format the code, make it more readable
3858
3859 Signed-off-by: Dave Liu <daveliu@freescale.com>
3860 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3861
3862commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
3863Author: Dave Liu <r63238@freescale.com>
3864Date: Thu Jan 10 23:07:23 2008 +0800
3865
3866 mpc83xx: Reduce the latency of DDR
3867
3868 Reduce the AL from 2 to 1 clock to improve the performance.
3869
3870 Signed-off-by: Dave Liu <daveliu@freescale.com>
3871 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3872
3873commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
3874Author: Dave Liu <r63238@freescale.com>
3875Date: Thu Jan 10 23:06:05 2008 +0800
3876
3877 mpc83xx: Fix the wrong definition of MPC8315E
3878
3879 According to the latest user manual of MPC8315E,
3880 1) The SVCOD of HRCWL is different than 837x
3881 2) The SCCR has changes
3882
3883 Signed-off-by: Dave Liu <daveliu@freescale.com>
3884 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3885
3886commit ec2638ea08a537a1bd409db873aaaa33a053ebae
3887Author: Dave Liu <r63238@freescale.com>
3888Date: Thu Jan 10 23:05:00 2008 +0800
3889
3890 mpc83xx: Fix the typo in mpc83xx.h
3891
3892 The SPCR about TSEC priority is wrong.
3893
3894 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
3895 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
3896 Signed-off-by: Dave Liu <daveliu@freescale.com>
3897 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3898
3899commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
3900Author: Dave Liu <r63238@freescale.com>
3901Date: Thu Jan 10 23:04:13 2008 +0800
3902
3903 mpc83xx: Fix the typo in global data struct
3904
3905 Fix the typo in global_data.h
3906
3907 Signed-off-by: Dave Liu <daveliu@freescale.com>
3908 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3909
3910commit 2c5b48fc205c3e2752910da8f39209ed075929e5
3911Author: Dave Liu <r63238@freescale.com>
3912Date: Thu Jan 10 23:03:03 2008 +0800
3913
3914 mpc83xx: Remove cache config from config.h
3915
3916 clean up the cache config from configs.h of board
3917
3918 Signed-off-by: Dave Liu <daveliu@freescale.com>
3919 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3920
3921commit fab6f556bbbbd1bb35a5433161f7f173c18df559
3922Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3923Date: Wed Jan 9 20:57:47 2008 +0300
3924
3925 mpc83xx: add support for the MPC8360E-RDK
3926
3927 This is MPC8360E based board with:
3928 - 256MB fixed SDRAM;
3929 - 8MB Intel Strata NOR flash;
3930 - StMICRO 64MiB NAND flash;
3931 - two 10/100/1000 ethernet ports connected via Broadcom
3932 BCM5481 PHYs;
3933 - two 10/100 ethernet ports connected via National
3934 DP83848 PHYs;
3935 - one PCI and one miniPCI slots;
3936 - four serial ports (two NS16550-compatible, two UCCs);
3937 - four USB ports working through MPC8360E "FHCI" USB controller;
3938 - Fujitsu MB86277 graphics controller;
3939 - Analog to Digital Converter/Touchscreen controller, AD7843
3940 connected to SPI.
3941
3942 Features not supported in this patch are:
3943 - StMICRO 64MiB NAND flash (patch sent);
3944 - MINT framebuffer initialization (patch is pending);
3945 - Fetching production information from the EEPROM via I2C;
3946 - FHCI USB;
3947 - Two slow UCCs used as RS-485 UARTs.
3948
3949 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3950 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3951
3952commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
3953Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3954Date: Wed Jan 9 20:57:40 2008 +0300
3955
3956 mpc83xx: add "fsl, qe" compatible fixups
3957
3958 New device trees will use "fsl,qe" compatible properties.
3959
3960 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3961 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3962
3963commit 977b57583a7c34010e566a09a679ec3c1836f996
3964Author: Kim Phillips <kim.phillips@freescale.com>
3965Date: Wed Jan 9 15:24:06 2008 -0600
3966
3967 mpc83xx: add missing CONFIG_HAS_ETH0 defines
3968
3969 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
3970 is defined; add the define to the missing board configs.
3971
3972 Thanks to Emilian Medve for finding this.
3973
3974 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3975
3976commit b830b7f1635984ba607219fcbd78597c28eeb529
3977Author: Becky Bruce <bgill@freescale.com>
3978Date: Thu Jan 10 14:00:28 2008 -0600
3979
3980 86xx: Support 2GB DIMMs
3981
3982 Configure the number of bits used to address the banks inside the SDRAM
3983 device. The default register value of 0 means 2 bits to address 4 banks.
3984 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
3985
3986 Signed-off-by: Becky Bruce <bgill@freescale.com>
3987
3988commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
3989Author: Niklaus Giger <niklausgiger@gmx.ch>
3990Date: Thu Jan 10 18:50:33 2008 +0100
3991
3992 ppc4xx: Make Sequoia boot vxWorks
3993
3994 vxWorks expects in
3995 TLB 0 a entry for the Machine Check interrupt
3996 TLB 1 a entry for the RAM
3997 TLB 2 a entry for the EBC
3998 TLB 3 a entry for the boot flash
3999
4000 After changing the baudrate to 9600 I had no problems to boot the
4001 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
4002 June 18, 2007)
4003
4004 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4005
4006commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
4007Author: Larry Johnson <lrj@arlinx.com>
4008Date: Wed Jan 9 23:10:27 2008 -0500
4009
4010 ppc4xx: Fix dflush() to restore DVLIM register
4011
4012 Signed-off-by: Larry Johnson <lrj@acm.org>
4013
4014commit 252f60b068d1f94190b5bcfda169db582387e15e
4015Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4016Date: Thu Jan 10 03:52:44 2008 -0500
4017
4018 Nios2: remove common/cmd_bdinfo.c unused variable.
4019
4020 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4021 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
4022
4023commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
4024Author: Ben Warren <biggerbadderben@gmail.com>
4025Date: Wed Jan 9 18:15:53 2008 -0500
4026
4027 Fix Ethernet init() return codes
4028
4029 Change return values of init() functions in all Ethernet drivers to conform
4030 to the following:
4031
4032 >=0: Success
4033 <0: Failure
4034
4035 All drivers going forward should return 0 on success. Current drivers that
4036 return 1 on success were left as-is to minimize changes.
4037
4038 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4039 Acked-by: Stefan Roese <sr@denx.de>
4040 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4041 Acked-by: Kim Phillips <kim.phillips@freescale.com>
4042 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
4043 Acked-By: Timur Tabi <timur@freescale.com>
4044
4045commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
4046Author: Wolfgang Denk <wd@denx.de>
4047Date: Thu Jan 10 00:55:14 2008 +0100
4048
4049 Coding Style cleanup; update CHANGELOG
4050
4051 Signed-off-by: Wolfgang Denk <wd@denx.de>
4052
Wolfgang Denkd3a65322008-01-10 00:55:14 +01004053commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
4054Author: Kim Phillips <kim.phillips@freescale.com>
4055Date: Wed Jan 9 16:56:54 2008 -0600
4056
4057 Add QE brg freq and correct qe bus freq fdt update code
4058
4059 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4060 Signed-off-by: Andy Fleming <afleming@freescale.com>
4061
4062commit 890dfef06c2d169a3356359596890754dfb8ee1c
4063Author: Andy Fleming <afleming@freescale.com>
4064Date: Wed Jan 9 16:34:51 2008 -0600
4065
4066 Remove cache config from ATUM8548 and sbc8548 configs
4067
4068 These boards weren't updated by Kumar's config patch because they
4069 weren't in the tree, yet.
4070
4071 Signed-off-by: Andy Fleming <afleming@freescale.com>
4072
4073commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
4074Author: Timur Tabi <timur@freescale.com>
4075Date: Mon Jan 7 13:31:19 2008 -0600
4076
4077 85xx: add ability to upload QE firmware
4078
4079 Define the layout of a binary blob that contains a QE firmware and instructions
4080 on how to upload it. Add function qe_upload_firmware() to parse the blob and
4081 perform the actual upload. Add command-line command "qe fw" to take a firmware
4082 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
4083 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
4084 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
4085
4086 Signed-off-by: Timur Tabi <timur@freescale.com>
4087
4088commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
4089Author: Kumar Gala <galak@kernel.crashing.org>
4090Date: Tue Jan 8 01:22:21 2008 -0600
4091
4092 85xx: Remove cache config from configs.h
4093
4094 Either use the standard defines in asm/cache.h or grab the information
4095 at runtime from the L1CFG SPR.
4096
4097 Also, minor cleanup in cache.h to make the code a bit more readable.
4098
4099 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4100
4101commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
4102Author: robert lazarski <robertlazarski@gmail.com>
4103Date: Fri Dec 21 10:39:27 2007 -0500
4104
4105 mpc85xx: Add support for ATUM8548 (updated)
4106
4107 Add support for Instituto Atlantico's ATUM8548 board
4108
4109 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
4110 Signed-off-by: Andy Fleming <afleming@freescale.com>
4111
4112commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
4113Author: robert lazarski <robertlazarski@gmail.com>
4114Date: Fri Dec 21 10:36:37 2007 -0500
4115
4116 mpc85xx: Add support for ATUM8548 (updated)
4117
4118 Add support for Instituto Atlantico's ATUM8548 board
4119
4120 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
4121
4122commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
4123Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
4124Date: Thu Dec 13 06:45:14 2007 -0600
4125
4126 mpc85xx: Add support for SBC8548 (updated)
4127
4128 Add support for Wind River's SBC8548 reference board.
4129
4130 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
4131
4132commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
4133Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
4134Date: Thu Dec 13 06:45:08 2007 -0600
4135
4136 mpc85xx: Add support for SBC8548 (updated)
4137
4138 Add support for Wind River's SBC8548 reference board.
4139
4140 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
4141 Signed-off by: Andy Fleming <afleming@freescale.com>
4142
4143commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
4144Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4145Date: Mon Oct 22 19:58:19 2007 +0400
4146
4147 MPC8568E-MDS: set up QE pario for UART1
4148
4149 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
4150 be set up appropriately.
4151
4152 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4153
4154commit ad162249cb371e9e38971676f09be791e5f3cf4a
4155Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4156Date: Mon Oct 22 18:12:46 2007 +0400
4157
4158 MPC8568E-MDS: reset UCCs to use them reliably
4159
4160 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
4161 UCCs.
4162
4163 p.s Similar code exists in the Linux kernel board file (for capability
4164 reasons with older U-Boots), but should be removed some day.
4165
4166 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4167
4168commit 2146cf56821c3364786ca94a7306008c5824b238
4169Author: Kumar Gala <galak@kernel.crashing.org>
4170Date: Wed Dec 19 01:18:15 2007 -0600
4171
4172 Reworked FSL Book-E TLB macros to be more readable
4173
4174 The old macros made it difficult to know what WIMGE and perm bits
4175 were set for a TLB entry. Actually use the bit masks for these items
4176 since they are only a single bit.
4177
4178 Also moved the macros into mmu.h out of e500.h since they aren't specific
4179 to e500.
4180
4181 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4182
4183commit 1d47273d46925929f8f2c1913cd96d7257aade88
4184Author: Kumar Gala <galak@kernel.crashing.org>
4185Date: Tue Dec 18 23:21:51 2007 -0600
4186
4187 Use FSL Book-E MMU macros from Linux Kernel
4188
4189 Grab the FSL Book-E MAS register macros from Linux. Also added
4190 defines for page sizes up to 4TB and removed SHAREN since it doesnt
4191 really exist.
4192
4193 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4194
4195commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
4196Author: Andy Fleming <afleming@freescale.com>
4197Date: Wed Jan 9 13:51:32 2008 -0600
4198
4199 Fix my own merge stupidity
4200
4201 Way back in August I merged Heiko's patch:
4202 566a494f592: [PCS440EP] upgrade the PCS440EP board
4203
4204 with Jon's CONFIG_COMMANDS patches.
4205
4206 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
4207
4208 However, in the process, I left out some of Heiko's good changes.
4209
4210 Now Heiko's and Jon's patches are properly merged in fat_register_device()
4211
4212 Signed-off-by: Andy Fleming <afleming@freescale.com>
4213
4214commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
4215Author: James Yang <James.Yang@freescale.com>
4216Date: Wed Jan 9 11:17:49 2008 -0600
4217
4218 Expose parse_line() globally.
4219
4220 Add new function readline_into_buffer() that allows the
4221 output of readline to be put into a pointer to char buffer.
4222
4223 This refactoring allows other functions besides the
4224 main command loop to also use the same input mechanism.
4225
4226 Signed-off-by: James Yang <James.Yang@freescale.com>
4227 Acked-by: Jon Loeliger <jdl@freescale.com>
4228
4229commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
4230Author: Guennadi Liakhovetski <lg@denx.de>
4231Date: Wed Jan 9 01:15:25 2008 +0100
4232
4233 trivial: fix consequences of a bad merge
4234
4235 Fix what looks like a merge artifact.
4236
4237 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4238
4239commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
4240Author: Zhang Wei <wei.zhang@freescale.com>
4241Date: Thu Jan 3 10:51:15 2008 +0800
4242
4243 Add Ctrl combo key support to usb keyboard driver.
4244
4245 Ctrl combo key support is added, which is very useful to input Ctrl-C
4246 for interrupt current job.
4247 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
4248 key input when tstc() is called.
4249
4250 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4251
4252commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
4253Author: Marcel Ziswiler <marcel@ziswiler.com>
4254Date: Sun Dec 30 03:30:56 2007 +0100
4255
4256 fix various comments
4257
4258 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
4259
4260commit 7817cb2083d982923752fe0f12b67c0e7c09a027
4261Author: Marcel Ziswiler <marcel@ziswiler.com>
4262Date: Sun Dec 30 03:30:46 2007 +0100
4263
4264 fix comments with new drivers organization
4265
4266 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
4267
4268commit a9b410dc7d2a4721c408b13abfc037988150f145
4269Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4270Date: Fri Dec 28 12:50:59 2007 +0900
4271
4272 Remove the obsolete terse version of do_mii()
4273
4274 We now have more useful version of do_mii() and everybody use it.
4275 Gerald Van Baren says:
4276
4277 > When I originally wrote the mii command 6(!) years ago, I wrote a
4278 > verbose version that printed human readable decomposition of the flags,
4279 > etc., and a terse one that didn't print as much stuff and thus had a
4280 > smaller memory footprint.
4281 >
4282 > It sounds like the terse version has withered and died, apparently
4283 > people are only using the verbose version (which is very understandable,
4284 > I do myself).
4285
4286 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4287 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4288
4289commit 01c687aa6e065bd4faf80f723361e798941dd6b0
4290Author: Mike Frysinger <vapier@gentoo.org>
4291Date: Thu Dec 27 13:42:56 2007 -0500
4292
4293 Do not reference sha1.c when building mkimage.
4294
4295 remove sha1.o from mkimage linking since it isn't actually used.
4296
4297 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
4298
4299commit b9173af73e524d37c812f210173cf83385c5171a
4300Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4301Date: Thu Dec 27 15:39:54 2007 +0900
4302
4303 common/cmd_mii.c: Add sanity argc check
4304
4305 If type mii command without arguments, we suffer from uninitialized argv[]
4306 entries; for example we MIPS get stuck by TLB error.
4307
4308 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4309
4310commit 500856eb1707ed17d9204baa61dd59948d3b2899
4311Author: Rafal Jaworowski <raj@semihalf.com>
4312Date: Wed Jan 9 19:39:36 2008 +0100
4313
4314 API for external applications.
4315
4316 This is an API for external (standalone) applications running on top of
4317 U-Boot, and is meant to be more extensible and robust than the existing
4318 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
4319 for more details.
4320
4321 Included is the demo application using this new framework (api_examples).
4322
4323 Please note this is still an experimental feature, and is turned off by
4324 default.
4325
4326 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
4327
Wolfgang Denk3bb77fb2008-01-12 00:39:37 +01004328commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
4329Author: Jon Loeliger <jdl@freescale.com>
4330Date: Wed Jan 9 12:14:55 2008 -0600
4331
4332 86xx: Remove cache config from configs.h
4333
4334 Just use the standard defines in asm/cache.h.
4335
4336 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4337
Wolfgang Denkd3a65322008-01-10 00:55:14 +01004338commit 26a41790f8eba19ad450e18ae91351daf485b3e2
4339Author: Rafal Jaworowski <raj@semihalf.com>
4340Date: Wed Jan 9 18:05:27 2008 +0100
4341
4342 Globalize envmatch()
4343
4344 The newly introduced API (routines related to env vars) will need to call
4345 it.
4346
4347 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
4348
Wolfgang Denk3bb77fb2008-01-12 00:39:37 +01004349commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
4350Author: Jon Loeliger <jdl@freescale.com>
4351Date: Fri Jan 4 12:07:27 2008 -0600
4352
4353 Convert MPC8610HPCD to use libfdt.
4354
4355 Assumes the presence of the aliases node in the DTS to
4356 locate the pci and serial nodes for fixups.
4357
4358 Use consistent fdtaddr and fdtfile in environment variables.
4359
4360 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4361
4362commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
4363Author: Jon Loeliger <jdl@freescale.com>
4364Date: Fri Jan 4 11:58:23 2008 -0600
4365
4366 8610: Fix lingering compile warnings.
4367
4368 Turn off DEBUG.
4369
4370 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4371
Wolfgang Denkd3a65322008-01-10 00:55:14 +01004372commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
4373Author: Wolfgang Denk <wd@denx.de>
4374Date: Wed Jan 9 15:14:46 2008 +0100
4375
4376 Coding Style cleanup, update CHANGELOG
4377
4378 Signed-off-by: Wolfgang Denk <wd@denx.de>
4379
Wolfgang Denk6007f322008-01-09 15:14:46 +01004380commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
4381Author: Mike Frysinger <vapier@gentoo.org>
4382Date: Tue Dec 18 04:29:55 2007 -0500
4383
4384 fix easylogo on big endian dev systems
4385
4386 didnt realize how out of shape easylogo actually was until i tried using it.
4387 this patch does byte swapping as need be on the input tga header since the tga
4388 is in little endian but the host could just as well be big endian. i didnt
4389 bother using bswap macros or such stuff from system headers as nothing in
4390 POSIX dictates byte swapping functionality.
4391
4392 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
4393
4394commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
4395Author: Mike Frysinger <vapier@gentoo.org>
4396Date: Tue Dec 18 03:23:25 2007 -0500
4397
4398 cleanup easylogo
4399
4400 - make the Makefile not suck
4401 - include proper headers for prototypes
4402 - fix obvious broken handling of strchr() when handling '.' in filenames
4403
4404 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
4405
4406commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
4407Author: raptorbrino@aim.com <raptorbrino@aim.com>
4408Date: Thu Dec 13 21:23:28 2007 -0500
4409
4410 Fix build problems under Cygwin
4411
4412 This patch allows u-boot to build without error in a cygwin
4413 environment. Cygwin does not define __u64 in it's
4414 include/asm/types.h file. The -idirafter flag in the u-boot
4415 build causes the inclusion of the cygwin types.h file as opposed
4416 to u-bot/include/asm/types.h file which does define __u64.
4417 Subsequently, sha1.c compile fails due to unknown symbol.
4418
4419 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
4420
4421commit 43ef1c381f9195504a2488f5cb909227eb97d475
4422Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
4423Date: Fri Nov 30 17:29:59 2007 +0100
4424
4425 cmd_bmp: Add support for displaying gzip compressed bmps
4426
4427 The existing code can show information about a gzip compressed BMP
4428 image, but can't actually display it.
4429
4430 Therefore, move the decompression code out of bmp_info() and use it in
4431 bmp_display() as well in order to display a compressed BMP image.
4432
4433 Also, clean things up a bit and fix a memory leak while we're at it.
4434
4435 [hskinnemoen@atmel.com: a bit of refactoring]
4436 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
4437
4438commit d197ffd8172c6fdef38733424640a9a47295d6e9
4439Author: Guennadi Liakhovetski <lg@denx.de>
4440Date: Thu Nov 29 21:15:56 2007 +0100
4441
4442 Fix and optimize MII operations on FEC (MPC8xx) controllers
4443
4444 This patch fixes several issues at least on a MPC885 based system with two
4445 FEC interfaces used in MII mode.
4446
4447 1. PHY discovery should first read PHY_PHYIDR2 register and only then
4448 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
4449 otherwise the values read are wrong. Also notice, that PHY discovery
4450 cannot work on MPC88x / MPC87x in setups with both FECs active at all
4451 in its present form, because for both interfaces the registers from FEC
4452 1 are used to communicate over MII.
4453
4454 2. Remove code duplication for resetting the FEC by isolating it into a
4455 separate function.
4456
4457 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
4458
4459 4. Optimize mii_init() to only reset the FEC 1 controller once.
4460
4461 5. Fix a typo in mii_init() using index i instead of j thus potentially
4462 leading to unpredictable results.
4463
4464 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4465
4466commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
4467Author: Guennadi Liakhovetski <lg@denx.de>
4468Date: Tue Nov 20 13:14:20 2007 +0100
4469
4470 Fix endianness conversions in rtl8169 driver
4471
4472 It is unclear on what platforms this driver has been tested, since
4473 noone up to now defines CONFIG_RTL8169 in the board configuration
4474 header. Now it has been fixed for a big-endian mpc8241 based
4475 linkstation platform. This patch presents the necessary endianness
4476 conversion fixes.
4477
4478 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4479
Wolfgang Denkd3a65322008-01-10 00:55:14 +01004480commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
4481Author: Zhang Wei <wei.zhang@freescale.com>
4482Date: Thu Jan 3 10:51:15 2008 +0800
4483
4484 Add Ctrl combo key support to usb keyboard driver.
4485
4486 Ctrl combo key support is added, which is very useful to input Ctrl-C
4487 for interrupt current job.
4488 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
4489 key input when tstc() is called.
4490
4491 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4492 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4493
Wolfgang Denk6007f322008-01-09 15:14:46 +01004494commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
4495Author: Wolfgang Denk <wd@denx.de>
4496Date: Wed Jan 9 13:43:38 2008 +0100
4497
4498 Coding Style clenaup; update CHANGELOG
4499
4500 Signed-off-by: Wolfgang Denk <wd@denx.de>
4501
Wolfgang Denk07eb0262008-01-09 13:43:38 +01004502commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
4503Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4504Date: Thu Dec 27 17:13:11 2007 +0100
4505
4506 Remove bit swapping in Xilinx Spartan bitfile loading
4507
4508 This patch removes the unnecessary bit swapping when
4509 booting .bit files with the 'fpga loadb' command.
4510
4511 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4512
4513commit 437fc7327f0611f82937858f2d80e4cd61b40984
4514Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4515Date: Thu Dec 27 17:13:05 2007 +0100
4516
4517 Fix MSB check in Xilinx Spartan slave serial mode
4518
4519 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4520
4521commit 3bff4ffa33729a42645e328a21e8d16488872958
4522Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4523Date: Thu Dec 27 17:12:56 2007 +0100
4524
4525 Add new Xilinx Spartan FPGA types
4526
4527 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4528
4529commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
4530Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4531Date: Thu Dec 27 17:12:43 2007 +0100
4532
4533 Add pre and post configuration callbacks for Spartan FPGAs
4534
4535 This patch adds a post configuration callback for Spartan2/3 FPGAs.
4536 pre and post configuration callback are now optional and
4537 not called when the function pointer is set to NULL.
4538
4539 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4540
4541commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
4542Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4543Date: Thu Dec 27 17:12:34 2007 +0100
4544
4545 Improve configuration of FPGA subsystem
4546
4547 This patch removes the FPGA subsystem configuration through
4548 the CONFIG_FPGA bitmask configuration option.
4549
4550 See README for the new options:
4551
4552 CONFIG_FPGA,
4553 CONFIG_FPGA_<vendor>,
4554 CONFIG_FPGA_<family>
4555
4556 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4557
4558commit 95c6bc7d4a3588b452baca610f8c795a83630477
4559Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4560Date: Thu Dec 27 16:55:17 2007 +0100
4561
4562 Add Epson RX8025 RTC support
4563
4564 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4565
4566commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
4567Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4568Date: Thu Dec 27 16:57:23 2007 +0100
4569
4570 serial: Make default_serial_console() a weak function
4571
4572 With this patch it is possible to reimplement default_serial_console()
4573 in board specific code. This will be done in the upcomming PMC440
4574 U-Boot port. This also allows the lwmon board maintainer to
4575 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
4576
4577 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4578
4579commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
4580Author: Harald Welte <laforge@openmoko.org>
4581Date: Wed Dec 19 14:14:47 2007 +0100
4582
4583 add 'terminal program' functionality
4584
4585 This patch adds a 'cu' like serial terminal command to u-boot
4586 using which you can access other serial ports from the system console.
4587
4588 OpenMoko uses this in their Neo1973 phones to get access to the GSM
4589 Modem and GPS chip from the bootloader.
4590
4591 Signed-off-by: Harald Welte <laforge@openmoko.org>
4592
4593commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
4594Author: Harald Welte <laforge@openmoko.org>
4595Date: Wed Dec 19 14:12:53 2007 +0100
4596
4597 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
4598 that used to exist with the legacy NAND code
4599
4600 Signed-off-by: Harald Welte <laforge@openmoko.org>
4601
4602commit f540c42d9564854b19ce9bbb70affe172529fe70
4603Author: Harald Welte <laforge@openmoko.org>
4604Date: Wed Dec 19 14:09:58 2007 +0100
4605
4606 Fix building with CRAMFS but not JFFS2 support
4607
4608 Signed-off-by: Harald Welte <laforge@openmoko.org>
4609
4610commit 23d0baf967fecdaf1804f045f6339337c5607eec
4611Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4612Date: Sat Dec 22 15:52:58 2007 +0100
4613
4614 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
4615
4616 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4617 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4618
4619commit 23776ff292966a85d811126933830bed48211826
4620Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4621Date: Tue Dec 11 10:53:12 2007 +0100
4622
4623 ARM: support board-specific ethernet PHY init
4624
4625 Add until the new phylib will be arrived
4626
4627 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4628
4629commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
4630Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4631Date: Sat Dec 8 16:34:08 2007 +0100
4632
4633 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
4634
4635 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4636
4637commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
4638Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4639Date: Sun Dec 9 11:01:10 2007 +0100
4640
4641 Add missing file in gitignore and comments
4642
4643 based on Linux source tree's .gitignore files
4644
4645 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4646
4647commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
4648Author: Wolfgang Denk <wd@denx.de>
4649Date: Wed Jan 9 11:36:21 2008 +0100
4650
4651 Coding Style cleanup, update CHANGELOG
4652
4653 Signed-off-by: Wolfgang Denk <wd@denx.de>
4654
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01004655commit b2e2142c500c48a57f18f9dd30e66c13caea0971
4656Author: Stefan Roese <sr@denx.de>
4657Date: Wed Jan 9 10:38:58 2008 +0100
4658
4659 POST: Execute SPR test after relocation
4660
4661 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
4662 self modifying code and this doesn't work with stack in d-cache, since
4663 I can't move the code from d-cache to i-cache. We move the SPR test to
4664 be executed a little later, after relocation. Then stack is located in
4665 SDRAM and this self-modifying code is no problem anymore.
4666
4667 Signed-off-by: Stefan Roese <sr@denx.de>
4668
4669commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
4670Author: Stefan Roese <sr@denx.de>
4671Date: Wed Jan 9 10:28:20 2008 +0100
4672
4673 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
4674
4675 This patch configures the LWMON5 port to use d-cache as init-ram and
4676 the unused GPT0_COMP6 as POST WORD storage.
4677
4678 Signed-off-by: Stefan Roese <sr@denx.de>
4679
4680commit 1754f50b710194f886b6f2831803d8960171a14d
4681Author: Stefan Roese <sr@denx.de>
4682Date: Wed Jan 9 10:25:46 2008 +0100
4683
4684 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
4685
4686 The privious 4xx POST implementation only supported storing the POST
4687 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
4688 we need to store the POST WORD in some other non volatile location.
4689 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
4690 a location.
4691
4692 Signed-off-by: Stefan Roese <sr@denx.de>
4693
4694commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
4695Author: Stefan Roese <sr@denx.de>
4696Date: Wed Jan 9 10:23:16 2008 +0100
4697
4698 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
4699
4700 This patch adds support for locking the init-ram/stack in d-cache,
4701 so that other regions may use d-cache as well
4702
4703 Note, that this current implementation locks exactly 4k of d-cache,
4704 so please make sure that you don't define a bigger init-ram area. Take
4705 a look at the lwmon5 440EPx implementation as a reference.
4706
4707 Signed-off-by: Stefan Roese <sr@denx.de>
4708
4709commit 0ddb89601a8d29e808db450366752ffdc6267c53
4710Author: Wolfgang Denk <wd@denx.de>
4711Date: Wed Jan 9 10:16:33 2008 +0100
4712
4713 Fix memset bug in ext2fs_read_file()
4714
4715 ext2fs_read_file() had the function arguments swapped.
4716
4717 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
4718
4719 Signed-off-by: Wolfgang Denk <wd@denx.de>
4720
4721commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
4722Author: Markus Klotzbücher <mk@denx.de>
4723Date: Tue Jan 5 08:17:15 1988 +0100
4724
4725 Fix problems with usb storage devices on MPC5200 /TQM5200
4726
4727 The MPC5200 OHCI controller operates in big endian, so
4728 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
4729
4730 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4731
4732commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
4733Author: Wolfgang Denk <wd@denx.de>
4734Date: Tue Jan 8 22:58:27 2008 +0100
4735
4736 Fix compile problem with new env code.
4737
4738 Signed-off-by: Wolfgang Denk <wd@denx.de>
4739
4740commit 64b3727b9779d86127cd576e392a987de5ebb9fd
4741Author: Markus Klotzbücher <mk@denx.de>
4742Date: Tue Nov 27 10:23:20 2007 +0100
4743
4744 tools: fix fw_printenv tool to compile again
4745
4746 This patch updates the fw_printenv/fw_setenv userspace tool to include
4747 the correct MTD header in order to compile against current kernel
4748 headers. Backward compatibility is preserved by introducing an option
4749 MTD_VERSION which can be set to "old" for compilation using the old MTD
4750 headers. Along with this a number of warnings are fixed.
4751
4752 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4753
4754commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
4755Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4756Date: Tue Jan 8 15:40:09 2008 +0100
4757
4758 ppc4xx: assign PCI interrupts on seuqoia boards
4759
4760 Some operating systems rely on assigned PCI interrupts.
4761
4762 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4763
4764commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
4765Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4766Date: Tue Jan 8 15:50:49 2008 +0100
4767
4768 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
4769
4770 This patch allows the use of 4xx interrupt vector number defines
4771 in board specific code outside cpu/ppc4xx.
4772
4773 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4774
4775commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
4776Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4777Date: Tue Jan 8 15:39:01 2008 +0100
4778
4779 ppc4xx: Fix UIC2 vector number base
4780
4781 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4782
4783commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
4784Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4785Date: Tue Jan 8 12:49:58 2008 +0100
4786
4787 ppc4xx: Update PLB/PCI divider for PMC440 board
4788
4789 This patch updates the PLB/PCI divider when running at
4790 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
4791
4792 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4793
4794commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
4795Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4796Date: Tue Jan 8 11:13:09 2008 +0100
4797
4798 ppc4xx: Disable error message when no NAND chip is installed on PMC440
4799
4800 Add CFG_NAND_QUIET_TEST option to disable error message when
4801 no NAND chip is installed on PMC440 boards.
4802
4803 Disable a couple of config defines that are only used for NAND_U_BOOT.
4804
4805 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4806
Wolfgang Denkd3a65322008-01-10 00:55:14 +01004807commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
4808Author: Wolfgang Denk <wd@denx.de>
4809Date: Tue Jan 8 22:58:27 2008 +0100
4810
4811 Fix compile problem with new env code.
4812
4813 Signed-off-by: Wolfgang Denk <wd@denx.de>
4814
4815commit 6de66b35426312a21174a9bf0576a094e2904bea
4816Author: Markus Klotzbücher <mk@denx.de>
4817Date: Tue Nov 27 10:23:20 2007 +0100
4818
4819 tools: fix fw_printenv tool to compile again
4820
4821 This patch updates the fw_printenv/fw_setenv userspace tool to include
4822 the correct MTD header in order to compile against current kernel
4823 headers. Backward compatibility is preserved by introducing an option
4824 MTD_VERSION which can be set to "old" for compilation using the old MTD
4825 headers. Along with this a number of warnings are fixed.
4826
4827 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4828
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01004829commit ad3006fe7e84667021753b74247b0bafd97ba35f
4830Author: Gerald Van Baren <vanbaren@cideas.com>
4831Date: Mon Jan 7 23:47:32 2008 -0500
4832
4833 LIBFDT: use memmove() instead of memcpy()
4834
4835 This is partial patch from the DTC/libfdt
4836 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
4837 Author: David Gibson <david@gibson.dropbear.id.au>
4838 Date: Wed Nov 21 11:56:14 2007 +1100
4839
4840 The patch also fixes one genuine bug caught by valgrind -
4841 _packblocks() in fdt_rw.c was using memcpy() where it should have been
4842 using memmove().
4843
4844 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4845
4846commit aec7135bc300e3340d18f203347ee00c5b5f68c0
4847Author: David Gibson <david@gibson.dropbear.id.au>
4848Date: Mon Dec 17 14:42:07 2007 +1100
4849
4850 libfdt: Add more documentation (patch the seventh)
4851
4852 This patch adds more documenting comments to libfdt.h. Specifically,
4853 these document the read/write functions (not including fdt_open_into()
4854 and fdt_pack(), for now).
4855
4856 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4857
4858commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
4859Author: David Gibson <david@gibson.dropbear.id.au>
4860Date: Mon Dec 17 14:41:52 2007 +1100
4861
4862 libfdt: Add more documentation (patch the sixth)
4863
4864 This patch adds some more documenting comments to libfdt.h.
4865 Specifically this documents all the write-in-place functions.
4866
4867 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4868
4869commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
4870Author: Gerald Van Baren <vanbaren@cideas.com>
4871Date: Sat Dec 29 22:45:27 2007 -0500
4872
4873 Fine grained per property /chosen updating.
4874
4875 Implement a suggestion by Scott Wood to make the /chosen handling fine
4876 grained. Don't overwrite pre-existing properties on a per-property basis,
4877 so if /chosen exists but a necessary /chosen/property doesn't, it gets
4878 created. If a /chosen property exists, it is NOT overwritten unless the
4879 "force" flag is true.
4880
4881 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4882
4883commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
4884Author: Gerald Van Baren <vanbaren@cideas.com>
4885Date: Sat Jan 5 15:33:29 2008 -0500
4886
4887 Improve the FDT help message.
4888
4889 Add a note that "fdt copy" makes the new address active.
4890 Remove most of the extra hints at the end of the fdt help.
4891
4892 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4893
4894commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
4895Author: Gerald Van Baren <vanbaren@cideas.com>
4896Date: Sat Jan 5 14:52:04 2008 -0500
4897
4898 Support setting FDT properties with optional values.
4899
4900 Fix a bug found and documented by Bartlomiej Sieka where the optional
4901 value on "fdt set <path> <prop> [<val>]" wasn't optional.
4902
4903 => fdt mknode / testnode
4904 => fdt print /testnode
4905 testnode {
4906 };
4907 => fdt set /testnode testprop
4908 => fdt print /testnode
4909 testnode {
4910 testprop;
4911 };
4912
4913 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4914
4915commit 22fb2246df91bfc840d87f0c5910818bad55577a
4916Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4917Date: Fri Dec 28 11:56:30 2007 +0100
4918
4919 Add fdt_find_and_setprop() to fdt_support.h
4920
4921 fdt_find_and_setprop() is used by several 4xx boards and it's
4922 missing in the appropriate header. This patch eliminates a
4923 warning when building U-Boot for such boards.
4924
4925 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4926 Acked-by: Stefan Roese <sr@denx.de>
4927
4928commit 802b769bac17b0560d3535a42c502469ee190cd1
4929Author: Stefan Roese <sr@denx.de>
4930Date: Tue Jan 8 18:39:30 2008 +0100
4931
4932 ppc4xx: Return 0 on success in 4xx ethernet driver
4933
4934 Signed-off-by: Stefan Roese <sr@denx.de>
4935
4936commit 6775c68683a53c7abc778774641aac6f833a2cbf
4937Author: Kim Phillips <kim.phillips@freescale.com>
4938Date: Tue Jan 8 09:59:49 2008 -0600
4939
4940 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
4941
4942 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4943
4944commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
4945Author: Kim Phillips <kim.phillips@freescale.com>
4946Date: Thu Dec 20 16:28:34 2007 -0600
4947
4948 mpc83xx: rm remaining FLAT_TREE code
4949
4950 ..in board pci.c files
4951
4952 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4953
4954commit b3458d2cd55d01732e30a76d898afd99e871cd67
4955Author: Kim Phillips <kim.phillips@freescale.com>
4956Date: Thu Dec 20 15:57:28 2007 -0600
4957
4958 mpc83xx: remove FLAT_TREE code
4959
4960 need to rm it from pci code, too!
4961
4962 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4963
4964commit 5b8bc606c61456566af6912f818a153b6b06f242
4965Author: Kim Phillips <kim.phillips@freescale.com>
4966Date: Thu Dec 20 14:09:22 2007 -0600
4967
4968 mpc83xx: convert to using do_fixup_*()
4969
4970 convert to using simpler mpc85xx style fdt update code; streamline by
4971 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
4972 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
4973 converted over to using libfdt).
4974
4975 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4976
4977commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
4978Author: Paul Gortmaker <paul.gortmaker@windriver.com>
4979Date: Thu Dec 20 12:58:51 2007 -0500
4980
4981 sbc8349: enable libfdt by default on WRS SBC8349 board.
4982
4983 Make libfdt the default for the WRS SBC8349 board.
4984 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
4985 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
4986
4987 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
4988
4989commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
4990Author: Paul Gortmaker <paul.gortmaker@windriver.com>
4991Date: Thu Dec 20 12:58:16 2007 -0500
4992
4993 sbc8349: migrate board to libfdt
4994
4995 This adds libfdt support code for the Wind River sbc8349 board.
4996
4997 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
4998 the other Freescale 83xx boards.
4999
5000 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
5001
5002commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
5003Author: Paul Gortmaker <paul.gortmaker@windriver.com>
5004Date: Thu Dec 20 12:56:19 2007 -0500
5005
5006 sbc8349: Remove board specific ECC code
5007
5008 ECC code is now shared for all 83xx boards, so remove board specific one.
5009 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
5010
5011 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
5012
5013commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
5014Author: Kim Phillips <kim.phillips@freescale.com>
5015Date: Thu Dec 20 01:30:48 2007 -0600
5016
5017 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
5018
5019 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
5020
5021 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5022
5023commit ccf21c311e68d48399eff1e72936052885f6e3f7
5024Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
5025Date: Thu Dec 6 16:43:40 2007 +0100
5026
5027 Add support CONFIG_UEC_ETH3 in MPC83xx
5028
5029 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
5030
5031commit e6af9932d31171e35db880e7b2f29f903b1b7660
5032Author: Kumar Gala <galak@kernel.crashing.org>
5033Date: Mon Nov 26 11:00:54 2007 -0600
5034
5035 Remove CONFIG options related to OF that we dont use
5036
5037 The MPC8360E MDS config defined:
5038 CONFIG_OF_HAS_BD_T
5039 CONFIG_OF_HAS_UBOOT_ENV
5040
5041 Which we don't use or ever needed. This seems like copy-paste feature creep.
5042
5043 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5044
5045commit f602082b4b7ed4ee16432067cc67a0a24fedc715
5046Author: Kim Phillips <kim.phillips@freescale.com>
5047Date: Mon Dec 10 14:16:22 2007 -0600
5048
5049 mpc83xx: supress compiler warning
5050
5051 mpc8360emds.c: In function ‘ft_board_setup’:
5052 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
5053 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
5054
5055 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5056
5057commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
5058Author: Kim Phillips <kim.phillips@freescale.com>
5059Date: Tue Nov 27 14:17:29 2007 -0600
5060
5061 mpc83xx: fix remaining fdt_find_node_by_path references
5062
5063 rename to fdt_path_offset
5064
5065 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5066
5067commit 921d4b19ad1be704df58725485d9292dc0414adf
5068Author: Kim Phillips <kim.phillips@freescale.com>
5069Date: Mon Nov 19 12:30:09 2007 -0600
5070
5071 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
5072
5073 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
5074 This change guarantees that the environment will be located on the
5075 first flash sector after the U-Boot image.
5076
5077 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5078
5079commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
5080Author: Kim Phillips <kim.phillips@freescale.com>
5081Date: Fri Nov 9 14:28:08 2007 -0600
5082
5083 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
5084
5085 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
5086 properties in the device tree so the PHY gets configured for internal delay on
5087 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
5088
5089 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5090
5091commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
5092Author: Dave Liu <r63238@freescale.com>
5093Date: Tue Sep 18 12:41:15 2007 +0800
5094
5095 mpc83xx: update the CREDITS and MAINTAINERS
5096
5097 update the CREDITS and MAINTAINERS.
5098
5099 Signed-off-by: Dave Liu <daveliu@freescale.com>
5100
5101commit b21add4b42af7b767448251b599b91066a160e0d
5102Author: Dave Liu <r63238@freescale.com>
5103Date: Tue Sep 18 12:40:21 2007 +0800
5104
5105 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
5106
5107 Add the MAINTAINER and MAKEALL entries for mpc837xemds
5108
5109 Signed-off-by: Dave Liu <daveliu@freescale.com>
5110
5111commit f8900ce9094c462355eb792eea264ff16ac8fd16
5112Author: Dave Liu <r63238@freescale.com>
5113Date: Tue Sep 18 12:38:53 2007 +0800
5114
5115 mpc83xx: Add the MPC837xEMDS board readme
5116
5117 Add the README.mpc837xemds to /doc
5118
5119 Signed-off-by: Dave Liu <daveliu@freescale.com>
5120
5121commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
5122Author: Dave Liu <r63238@freescale.com>
5123Date: Tue Sep 18 12:37:57 2007 +0800
5124
5125 mpc83xx: Add the support of MPC837xEMDS board
5126
5127 The MPC837xEMDS board support:
5128 * DDR2 400MHz hardcoded and SPD init
5129 * Local bus NOR Flash
5130 * I2C, UART, MII and RTC
5131 * eTSEC RGMII
5132 * PCI host
5133
5134 Signed-off-by: Dave Liu <daveliu@freescale.com>
5135
5136commit 555da61702771fe0f76f3de23b4e7590f3704161
5137Author: Dave Liu <r63238@freescale.com>
5138Date: Tue Sep 18 12:36:58 2007 +0800
5139
5140 mpc83xx: Add the support of MPC8315E SoC
5141
5142 The MPC8315E SoC including e300c3 core and new IP blocks,
5143 such as TDM, PCI Express and SATA controller.
5144
5145 Signed-off-by: Dave Liu <daveliu@freescale.com>
5146
5147commit 03051c3d35c9981ceaa059005660e699f3eacf1c
5148Author: Dave Liu <r63238@freescale.com>
5149Date: Tue Sep 18 12:36:11 2007 +0800
5150
5151 mpc83xx: Add the support of MPC837x SoC
5152
5153 The MPC837x SoC including e300c4 core and new IP blocks,
5154 such as SDHC, PCI Express and SATA controller.
5155
5156 Signed-off-by: Dave Liu <daveliu@freescale.com>
5157
5158commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
5159Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5160Date: Wed Nov 14 18:54:53 2007 +0300
5161
5162 MPC8360E-MDS: configure and enable second UART
5163
5164 Despite user manual, BCSR9.7 is negated (high) on HRST, so
5165 UART2 is disabled. Fix that and configure QE pins properly.
5166
5167 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5168
5169commit b2893e1fcb28fad8c8b317104df8cee0142c7631
5170Author: Timur Tabi <timur@freescale.com>
5171Date: Mon Nov 5 09:34:06 2007 -0600
5172
5173 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
5174
5175 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
5176 currently-defined 83xx boards. This change guarantees that the environment
5177 will be located on the first flash sector after the U-Boot image.
5178
5179 Signed-off-by: Timur Tabi <timur@freescale.com>
5180 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5181
5182commit e05329516a13616b53240cd85b739217c2bf87f1
5183Author: Larry Johnson <lrj@acm.org>
5184Date: Fri Jan 4 13:27:02 2008 -0500
5185
5186 ppc4xx: Remove weak binding from common Denali data-eye search code
5187
5188 Now that there are no board-specific versions of
5189 "denali_core_search_data_eye()", the weak binding on the common version
5190 can be removed.
5191
5192 Signed-off-by: Larry Johnson <lrj@acm.org>
5193
5194commit 5ba576c01602fd328800a427964c36a0a05c5dce
5195Author: Stefan Roese <sr@denx.de>
5196Date: Sat Jan 5 09:13:46 2008 +0100
5197
5198 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
5199
5200 Signed-off-by: Stefan Roese <sr@denx.de>
5201
5202commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
5203Author: Stefan Roese <sr@denx.de>
5204Date: Sat Jan 5 09:12:41 2008 +0100
5205
5206 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
5207
5208 On Katmai the complete auto-calibration somehow doesn't seem to
5209 produce the best results, meaning optimal values for RQFD/RFFD.
5210 This was discovered by GDA using a high bandwidth scope,
5211 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
5212 so now on Katmai "only" RFFD is auto-calibrated.
5213
5214 This patch also adds RDCC calibration as mentioned on page 7 of
5215 the AMCC PowerPC440SP/SPe DDR2 application note:
5216 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
5217
5218 Signed-off-by: Stefan Roese <sr@denx.de>
5219
5220commit 49db47b8ae6afff2b898be312948ff501357dc80
5221Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5222Date: Wed Jan 2 16:48:42 2008 +0100
5223
5224 ppc4xx: Remove sdram.h from PMC440 board
5225
5226 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5227
5228commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
5229Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5230Date: Wed Jan 2 16:48:34 2008 +0100
5231
5232 ppc4xx: use common denali core defines and data eye search code for PMC440
5233
5234 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5235
5236commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
5237Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5238Date: Wed Jan 2 12:05:14 2008 +0100
5239
5240 ppc4xx: More cleanup for esd's LCD code
5241
5242 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5243
5244commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
5245Author: Stefan Roese <sr@denx.de>
5246Date: Fri Jan 4 12:00:01 2008 +0100
5247
5248 ppc4xx: Fix Sequoia NAND booting target
5249
5250 The Sequoia NAND booting target now uses the recently extracted
5251 cpu/ppc4xx/denali_data_eye.c file too.
5252
5253 Signed-off-by: Stefan Roese <sr@denx.de>
5254
5255commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
5256Author: Lawrence R. Johnson <lrj@acm.org>
5257Date: Thu Jan 3 15:02:02 2008 -0500
5258
5259 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
5260
5261 Signed-off-by: Larry Johnson <lrj@acm.org>
5262
5263commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
5264Author: Lawrence R. Johnson <lrj@acm.org>
5265Date: Fri Jan 4 02:11:56 2008 -0500
5266
5267 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
5268
5269 Note: this patch changes the configuration of some GPIO registers:
5270
5271 Register Old Value New Value
5272 --------------- ---------- ----------
5273 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
5274 DCR GPIO0_TSRH 0x55005000 0x00000000
5275 DCR GPIO1_TCR 0xC2000000 0xE2000000
5276 DCR GPIO1_TSRL 0x0C000000 0x00200000
5277 DCR GPIO1_ISR2L 0x00050000 0x00110000
5278
5279 Signed-off-by: Larry Johnson <lrj@acm.org>
5280
5281commit 5ab884b254ca2e707ab50545cd705f30108cf491
5282Author: Lawrence R. Johnson <lrj@acm.org>
5283Date: Thu Jan 3 18:54:00 2008 -0500
5284
5285 ppc4xx: Add functionality to GPIO support
5286
5287 This patch makes two additions to GPIO support:
5288
5289 First, it adds function gpio_read_in_bit() to read the a bit from the
5290 GPIO Input Register (GPIOx_IR) in the same way that function
5291 gpio_read_out_bit() reads a bit from the GPIO Output Register
5292 (GPIOx_OR).
5293
5294 Second, it modifies function gpio_set_chip_configuration() to provide
5295 an additional option for configuring the GPIO from the
5296 "CFG_4xx_GPIO_TABLE".
5297
5298 According to the 440EPx User's Manual, when an alternate output is used,
5299 the three-state control is configured in one of two ways, depending on
5300 the particular output. The first option is to select the corresponding
5301 alternate three-state control in the GPIOx_TRSH/L registers. The second
5302 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
5303 the GPIOx_TRSH/L registers, and set the corresponding bit in the
5304 GPIOx_TCR register to enable the output. For example, the Manual
5305 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
5306 the alternate three-state control (first option), and specifies
5307 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
5308 enabled in the GPIOx_TCR register (second option).
5309
5310 Currently, gpio_set_chip_configuration() configures all alternate signal
5311 outputs to use the first option. This patch allow the second option to
5312 be selected by setting the "out_val" element in the table entry to
5313 "GPIO_OUT_1". The first option is used when the "out_val" element is
5314 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
5315 alternate signal is selected, and because all current GPIO tables set
5316 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
5317 not change any existing configurations.
5318
5319 Signed-off-by: Larry Johnson <lrj@acm.org>
5320
5321commit 196404cdc1de495d6182e84731c200fc5748df15
5322Author: Larry Johnson <lrj@arlinx.com>
5323Date: Sun Dec 30 01:01:54 2007 -0500
5324
5325 PPC4xx: Remove sdram.h from board/lwmon5
5326
5327 These definitions are now in "include/ppc440.h".
5328
5329 Signed-off-by: Larry Johnson <lrj@acm.org>
5330
5331commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
5332Author: Larry Johnson <lrj@arlinx.com>
5333Date: Sun Dec 30 01:01:32 2007 -0500
5334
5335 PPC4xx: Use common code for LWMON5 board SDRAM support
5336
5337 This patch also modifies the functionality of the code so that the data-eye
5338 search is now done with with the cache disabled.
5339
5340 Signed-off-by: Larry Johnson <lrj@acm.org>
5341
5342commit 62cc3951ab72135d9c101f1845b794e63a0fa189
5343Author: Larry Johnson <lrj@arlinx.com>
5344Date: Sun Dec 30 01:01:14 2007 -0500
5345
5346 PPC4xx: Remove sdram.h from board/amcc/sequoia
5347
5348 These definitions are now in "include/ppc440.h".
5349
5350 Signed-off-by: Larry Johnson <lrj@acm.org>
5351
5352commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
5353Author: Larry Johnson <lrj@arlinx.com>
5354Date: Sun Dec 30 01:00:50 2007 -0500
5355
5356 PPC4xx: Use common code for Sequoia board SDRAM support
5357
5358 Signed-off-by: Larry Johnson <lrj@acm.org>
5359
5360commit 8b0c5c127690335758100c25eaec2b84db97c101
5361Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5362Date: Thu Dec 27 16:58:41 2007 +0100
5363
5364 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
5365
5366 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
5367 networking stack does not automatically switch to
5368 another interface. This patch does not touch the default
5369 behavior.
5370
5371 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5372 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5373
5374commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
5375Author: Upakul Barkakaty <upakul@gmail.com>
5376Date: Thu Nov 29 12:16:13 2007 +0530
5377
5378 NET: Proper return code handling in eth_init() function in file eth.c
5379
5380 This patch modifies the return code handling in the eth_init()
5381 function, to be compatible with the handling of the return codes in
5382 the other network stack files. It now returns a 0 on Success and -1 on
5383 error.
5384
5385 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
5386 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5387
5388commit 5ca2d0953e4579a80810966cca2077e20d912c97
5389Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5390Date: Mon Nov 19 20:27:04 2007 +0900
5391
5392 net/eth.c: Fix env_enetaddr signed overflow
5393
5394 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
5395 warned as below:
5396
5397 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
5398
5399 DRAM: 256 MB
5400 Flash: 32 MB
5401 In: serial
5402 Out: serial
5403 Err: serial
5404 Net: NEC-Candy
5405 Warning: NEC-Candy MAC addresses don't match:
5406 Address in SROM is 00:00:4C:80:92:A2
5407 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
5408
5409 This patch changes env_enetaddr type from `char' to `unsigned char'.
5410
5411 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
5412 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5413 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5414
5415commit f85b60710571b37293d2233933b76e2aa3db5635
5416Author: Rafal Jaworowski <raj@semihalf.com>
5417Date: Thu Dec 27 18:19:02 2007 +0100
5418
5419 Introduce new eth_receive routine
5420
5421 The purpose of this routine is receiving a single network frame, outside of
5422 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
5423 U-Boot will let them utilise networking facilities. For sending a raw frame
5424 the already existing eth_send() can be used.
5425
5426 The direct consumer of this routine is the newly introduced API layer for
5427 external applications (enabled with CONFIG_API).
5428
5429 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5430 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
5431 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5432
5433commit 5c740711f0ea5b51414b341b71597c4a0751be74
5434Author: Jon Loeliger <jdl@freescale.com>
5435Date: Thu Jan 3 10:41:04 2008 -0600
5436
5437 8610: Move include of config.h earlier.
5438
5439 Include config.h earlier in the set of #includes
5440 so as to avoid a incidental and duplicate definition
5441 of CFG_CACHELINE_SIZE.
5442
5443 Signed-off-by: Jon Loeliger
5444
5445commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
5446Author: Jon Loeliger <jdl@freescale.com>
5447Date: Tue Dec 4 10:53:34 2007 -0600
5448
5449 Don't slam #undef DEBUG in the 8641HPCN config file.
5450
5451 Doing so prevents it from being individually set
5452 and useful in other files.
5453
5454 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5455
5456commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
5457Author: Jon Loeliger <jdl@freescale.com>
5458Date: Wed Nov 28 14:47:18 2007 -0600
5459
5460 Convert MPC8641HPCN to use libfdt.
5461
5462 Assumes the presence of the aliases node in the DTS to
5463 locate the ethernet, pci and serial nodes for fixups.
5464
5465 Use consistent fdtaddr and fdtfile in environment variables.
5466
5467 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5468
5469commit ce37422d0002e10490e268392e0c4e3028e52cec
5470Author: Stefan Roese <sr@denx.de>
5471Date: Wed Jan 2 14:06:26 2008 +0100
5472
5473 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
5474
5475 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
5476 flash chips connected to a 32bit wide port.
5477
5478 Signed-off-by: Stefan Roese <sr@denx.de>
5479
5480commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
5481Author: Wolfgang Denk <wd@denx.de>
5482Date: Wed Jan 2 15:58:44 2008 +0100
5483
5484 Fix compile problem introduced by "cleanup" commit 3dfd708c
5485
5486 Signed-off-by: Wolfgang Denk <wd@denx.de>
5487
5488commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
5489Author: Wolfgang Denk <wd@denx.de>
5490Date: Wed Jan 2 15:54:45 2008 +0100
5491
5492 Make scripts and Makefiles POSIX compliant
5493
5494 The bash builtin versions of the "test" (resp. "[") command allow
5495 using "==" for string comparisons, but POSIX compatible implemen-
5496 tations (like /usr/bin/test) insist on using "=" only. On such systems
5497 you will see:
5498
5499 $ /usr/bin/test a == a && echo OK
5500 /usr/bin/test: ==: binary operator expected
5501
5502 This patch fixes Makefiles and scripts to use POSIX style.
5503
5504 Signed-off-by: Wolfgang Denk <wd@denx.de>
5505
Wolfgang Denk865f0f92008-01-23 14:31:17 +01005506commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
5507Author: Stefan Roese <sr@denx.de>
5508Date: Wed Jan 2 14:05:37 2008 +0100
5509
5510 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
5511
5512 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
5513 flash chips connected to a 32bit wide port.
5514
5515 Signed-off-by: Stefan Roese <sr@denx.de>
5516
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01005517commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
5518Author: Wolfgang Denk <wd@denx.de>
5519Date: Wed Jan 2 12:38:43 2008 +0100
5520
5521 Minor coding style cleanup.
5522
5523 Signed-off-by: Wolfgang Denk <wd@denx.de>
5524
5525commit e174ac34adf5d5653df12bc3cf19c52063a71269
5526Author: Stefan Roese <sr@denx.de>
5527Date: Fri Dec 28 17:29:56 2007 +0100
5528
5529 ppc4xx: Coding style cleanup
5530
5531 Signed-off-by: Stefan Roese <sr@denx.de>
5532
5533commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
5534Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5535Date: Fri Dec 28 17:07:24 2007 +0100
5536
5537 ppc4xx: Complete PMC440 board support
5538
5539 This patch brings the PMC440 board configuration file.
5540 Finally it enables the PMC440 board support.
5541
5542 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5543
5544commit 407843a582560fc5231299561ab3c2b6b6cd3397
5545Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5546Date: Fri Dec 28 17:07:18 2007 +0100
5547
5548 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
5549
5550 This patch adds some BSP commands and FPGA booting support
5551 for esd's PMC440 boards.
5552
5553 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5554
5555commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
5556Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5557Date: Fri Dec 28 17:07:14 2007 +0100
5558
5559 ppc4xx: Add initial esd PMC440 board files
5560
5561 This patch adds the first files for the new esd PMC440 boards.
5562 The next two patches will complete the PMC440 board support.
5563
5564 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5565
5566commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
5567Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5568Date: Fri Dec 28 17:10:36 2007 +0100
5569
5570 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
5571
5572 - add EEPROM write protection for esd PLU405 boards.
5573 - initialize NAND GPIOs
5574 - use correct io accessors
5575 - cleanup
5576
5577 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5578
5579commit 77660c4b59055d621d2a8595bd4c18bb277268fc
5580Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5581Date: Fri Dec 28 17:10:44 2007 +0100
5582
5583 ppc4xx: use correct io accessors for esd's LCD code
5584
5585 This patch fixes esd's LCD dectection code to work correctly with
5586 newer gcc versions.
5587
5588 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5589
5590commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
5591Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5592Date: Fri Dec 28 17:10:42 2007 +0100
5593
5594 ppc4xx: Maintenance patch for VOH405 boards
5595
5596 - add EEPROM write protection
5597 - initialize NAND GPIOs
5598 - use correct io accessors
5599 - slow down I2C clock to 100kHz
5600 - enable ext. I2C bus
5601 - cleanup
5602
5603 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5604
5605commit c05569066dbcba3fdf36d4d1943df265dc316a86
5606Author: Stefan Roese <sr@denx.de>
5607Date: Fri Dec 28 16:08:08 2007 +0100
5608
5609 ppc4xx: Enable 405EP PCI arbiter per default on all boards
5610
5611 In an attmemt to clean up the 4xx start.S file, I removed the enabling
5612 of the internal 405EP PCI arbiter. This is needed for multiple other
5613 405EP platforms, like most of the esd 405EP. Now the internal PCI
5614 arbiter is enabled again per default as it has been before.
5615
5616 Signed-off-by: Stefan Roese <sr@denx.de>
5617 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5618
5619commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
5620Author: Stefan Roese <sr@denx.de>
5621Date: Fri Dec 28 15:53:46 2007 +0100
5622
5623 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
5624
5625 Signed-off-by: Stefan Roese <sr@denx.de>
5626 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5627
5628commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
5629Author: Stefan Roese <sr@denx.de>
5630Date: Fri Dec 28 06:06:04 2007 +0100
5631
5632 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
5633
5634 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
5635 platforms mentioned above.
5636
5637 Signed-off-by: Stefan Roese <sr@denx.de>
5638
5639commit b568fd25574181a3b12ae3d66b2913903442cb83
5640Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5641Date: Thu Dec 27 17:03:46 2007 +0100
5642
5643 Remove CPCI440 board
5644
5645 This board never left prototyping state and it
5646 became a millstone round my neck. So remove it.
5647
5648 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5649
5650commit c591dffe0cbacd896ccbad06011fe6d6afa080da
5651Author: Larry Johnson <lrj@arlinx.com>
5652Date: Thu Dec 27 11:28:51 2007 -0500
5653
5654 Add support for Korat PPC440EPx board
5655
5656 These patches add support for the PPC440EPx-based "Korat" board to
5657 U-Boot. They are based primarily on support for the Sequoia board.
5658
5659 Signed-off-by: Larry Johnson <lrj@acm.org>
5660
5661commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
5662Author: Larry Johnson <lrj@arlinx.com>
5663Date: Sat Dec 22 15:16:25 2007 -0500
5664
5665 Add configuration file for Korat board
5666
5667 This patch supplies the configuration file for the Korat PPC440EPx-
5668 processor board.
5669
5670 Signed-off-by: Larry Johnson <lrj@acm.org>
5671
5672commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
5673Author: Larry Johnson <lrj@arlinx.com>
5674Date: Sat Dec 22 15:16:11 2007 -0500
5675
5676 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
5677
5678 Signed-off-by: Larry Johnson <lrj@acm.org>
5679
5680commit aba19604d848b2838cfb9ebe818909e6a216058e
5681Author: Larry Johnson <lrj@arlinx.com>
5682Date: Thu Dec 27 10:54:48 2007 -0500
5683
5684 Add 440EPx DDR2 SPD DIMM support
5685
5686 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
5687 controller. It should also work on the 440GRx. It is based on the DDR2
5688 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
5689
5690 This code has been tested on prototype Korat boards with three Kingston
5691 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
5692 (two ranks). The Korat board has a single DIMM socket, but support has
5693 been provided (though not tested) for boards with two DIMM sockets.
5694
5695 Signed-off-by: Larry Johnson <lrj@acm.org>
5696
5697commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
5698Author: Larry Johnson <lrj@arlinx.com>
5699Date: Sat Dec 22 15:15:30 2007 -0500
5700
5701 Copy 440EPx/GRx SDRAM data-eye search to common directory
5702
5703 This patch creates a non-board-specific file for performing the SDRAM
5704 data-eye search. It also adds ECC error checking to the test of valid
5705 data on readback when ECC is enabled.
5706
5707 Signed-off-by: Larry Johnson <lrj@acm.org>
5708
5709commit c46f53333b22b1f9098676bea8884fc7db820cf3
5710Author: Larry Johnson <lrj@arlinx.com>
5711Date: Sat Dec 22 15:15:13 2007 -0500
5712
5713 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
5714
5715 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
5716 It also fixes two typos in the definitions, so the board-specific
5717 "sdram.h" files containing these definitions are also fixed to avoid
5718 compiler warnings.
5719
5720 Signed-off-by: Larry Johnson <lrj@acm.org>
5721
5722commit c348578bf612d0c56d8d376d23cae16defbd86af
5723Author: Larry Johnson <lrj@arlinx.com>
5724Date: Thu Dec 27 10:50:55 2007 -0500
5725
5726 Add Ethernet 1000BASE-X support for PPC4xx
5727
5728 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
5729 is defined, the PHY will advertise it's capabilities for autonegotiation
5730 based on the capabilities shown in the PHY's status registers, including
5731 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
5732 advertise hard-coded capabilities, as before.
5733
5734 Signed-off-by: Larry Johnson <lrj@acm.org>
5735
5736commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
5737Author: Larry Johnson <lrj@arlinx.com>
5738Date: Thu Dec 27 09:52:17 2007 -0500
5739
5740 Add driver for National Semiconductor LM73 temperature sensor
5741
5742 This driver is based on the driver for the LM75.
5743
5744 Signed-off-by: Larry Johnson <lrj@acm.org>
5745
5746commit 12618278688ea9b3d76536960a5ad2e3790fac40
5747Author: Larry Johnson <lrj@arlinx.com>
5748Date: Sat Dec 22 15:14:00 2007 -0500
5749
5750 Add driver for STMicroelectronics M41T60 RTC
5751
5752 This driver is based on the driver for the M41T11. In the intended
5753 application, the RTC will be powered by a large capacitor, rather than a
5754 battery. The driver therefore checks to see whether the RTC has lost
5755 power. The chip's OUT bit is normally reset from its power-up state. If
5756 the OUT bit is read as set, or if the date and time are not valid, then the
5757 RTC is assumed to have lost power, and its date and time are reset to
5758 1900-01-01 00:00:00.
5759
5760 Support for adjusting the speed of the clock to improve accuracy is
5761 provided through an environment variable.
5762
5763 Signed-off-by: Larry Johnson <lrj@acm.org>
5764
5765commit d3471173e14b7544bb60339eda8d3d3906694b0a
5766Author: Larry Johnson <lrj@arlinx.com>
5767Date: Sat Dec 22 15:34:39 2007 -0500
5768
5769 Use out_be32() and friends to access memory-mapped registers in sequoia.c
5770
5771 Signed-off-by: Larry Johnson <lrj@acm.org>
5772
5773commit c68f59fe3ec16769f82b5fca7421983c336d3aac
5774Author: Larry Johnson <lrj@arlinx.com>
5775Date: Sat Dec 22 15:34:20 2007 -0500
5776
5777 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
5778
5779 Signed-off-by: Larry Johnson <lrj@acm.org>
5780
5781commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
5782Author: Larry Johnson <lrj@arlinx.com>
5783Date: Sat Dec 22 15:23:50 2007 -0500
5784
5785 Cosmetic changes to ECC POST for AMCC Denali core
5786
5787 Signed-off-by: Larry Johnson <lrj@acm.org>
5788
5789commit 2e583d6c81034f80a267b89fa55498ae063ccef1
5790Author: Stefan Roese <sr@denx.de>
5791Date: Wed Dec 26 20:20:19 2007 +0100
5792
5793 ppc4xx: Fix compilation problem in 405 cache POST test
5794
5795 Signed-off-by: Stefan Roese <sr@denx.de>
5796
5797commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
5798Author: Stefan Roese <sr@denx.de>
5799Date: Sat Dec 22 12:20:09 2007 +0100
5800
5801 ppc4xx: Move virtual address of POST cache test to bigger address
5802
5803 On Sequoia & LWMON5 the virtual address of the POST cache test is now
5804 moved to a bigger address. This enables usage of more memory on those
5805 boards.
5806
5807 Signed-off-by: Stefan Roese <sr@denx.de>
5808
5809commit d91722102cf63f77a0148ed3f3d54a26d87575e9
5810Author: Stefan Roese <sr@denx.de>
5811Date: Sat Dec 22 12:18:26 2007 +0100
5812
5813 ppc4xx: Fix problem in 44x cache POST routine
5814
5815 As repoted by Larry Johnson, running "diag run cache" caused a crash
5816 in U-Boot. This problem was introduced by a patch that removed the
5817 TLB entry for the cache test after the test has completed. Since this
5818 TLB was only setup once, a 2nd attempt to run this cache test
5819 failed with a crash. Now this TLB entry is created every time the
5820 routine is called.
5821
5822 Signed-off-by: Stefan Roese <sr@denx.de>
5823
5824commit b0265b576bb8fa9465f99e99c323768b562fadc2
5825Author: Stefan Roese <sr@denx.de>
5826Date: Fri Dec 21 07:51:29 2007 +0100
5827
5828 ppc4xx: Update Makalu fdt support
5829
5830 Signed-off-by: Stefan Roese <sr@denx.de>
5831
5832commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
5833Author: Stefan Roese <sr@denx.de>
5834Date: Wed Dec 19 09:05:40 2007 +0100
5835
5836 ppc4xx: Add fdt support to AMCC Katmai eval board
5837
5838 Signed-off-by: Stefan Roese <sr@denx.de>
5839
5840commit 328a340392a5df9aaf00792be989df73e750859e
5841Author: Stefan Roese <sr@denx.de>
5842Date: Tue Dec 18 08:44:51 2007 +0100
5843
5844 ppc4xx: fdt: Cleanup setup of cpu node setup
5845
5846 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
5847 without using the absolute path to the cpu node. This makes it possible
5848 to use this U-Boot version with both versions of cpu-node naming
5849 "cpu@0" and the former "PowerPC,440EPx@0".
5850
5851 Signed-off-by: Stefan Roese <sr@denx.de>
5852
5853commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
5854Author: Stefan Roese <sr@denx.de>
5855Date: Mon Dec 17 17:26:21 2007 +0100
5856
5857 ppc4xx: Fix lwmon5 compilation problem
5858
5859 Now that the 440EPx ECC test is not board specific anymore
5860 remove this Makefile.
5861
5862 Signed-off-by: Stefan Roese <sr@denx.de>
5863
5864commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
5865Author: Anatolij Gustschin <agustschin@t-online.de>
5866Date: Wed Dec 5 17:43:20 2007 +0100
5867
5868 Fix ppc4xx clear_bss() code
5869
5870 ppc4xx clear_bss() fails if BSS segment size is not
5871 divisible by 4 without remainder. This patch provides
5872 fix for this problem.
5873
5874 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5875
5876commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
5877Author: Niklaus Giger <niklausgiger@gmx.ch>
5878Date: Fri Nov 30 18:35:11 2007 +0100
5879
5880 PPC4xx: Minimal changes to add vxWorks support
5881
5882 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5883
5884commit 052440b022ca8981d39b6f8c10d1aa6326f47480
5885Author: Markus Klotzbücher <mk@denx.de>
5886Date: Fri Nov 23 13:09:18 2007 +0100
5887
5888 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
5889
5890 When using dhcp/bootp the "netmask" environment variable is not
5891 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
5892 desireable, so the following patch adds this this option to the board
5893 config.
5894
5895 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5896 Signed-off-by: Stefan Roese <sr@denx.de>
5897
5898commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
5899Author: Larry Johnson <lrj@arlinx.com>
5900Date: Sat Oct 27 12:48:15 2007 -0400
5901
5902 Fix/enhance ECC POST for 440EPx/GRx
5903
5904 This patch allows the ECC POST to be used for different boards with the
5905 PPC440 Denali SDRAM controller. Modifications include skipping the test
5906 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
5907 to prevent timing errors.
5908
5909 Signed-off-by: Larry Johnson <lrj@acm.org>
5910
5911commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
5912Author: Larry Johnson <lrj@arlinx.com>
5913Date: Sat Oct 27 12:48:05 2007 -0400
5914
5915 PPC4xx: Move/rename ECC POST for 440EPx/GRx
5916
5917 Signed-off-by: Larry Johnson <lrj@acm.org>
5918
5919commit c29d2d3680046d430022c55e50fcb27f5866517e
5920Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5921Date: Fri Dec 14 11:20:33 2007 +0100
5922
5923 ppc4xx: use correct io accessors for 4xx ethernet POST
5924
5925 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5926
5927commit ba79fde58a48c0a6ff8e2a96caba951594142203
5928Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5929Date: Fri Dec 14 11:19:56 2007 +0100
5930
5931 ppc4xx: fix flush + invalidate_dcache_range arguments
5932
5933 flush + invalidate_dcache_range() expect the start and stop+1 address.
5934 So the stop address is the first address behind (!) the range.
5935
5936 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5937
5938commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
5939Author: Stefan Roese <sr@denx.de>
5940Date: Fri Dec 14 08:41:29 2007 +0100
5941
5942 ppc4xx: fdt: use fdt_fixup_ethernet()
5943
5944 By using aliases in the dts file, the ethernet node fixup is
5945 much easier with the recently added functions.
5946
5947 Please note that the dts file needs the aliases for this to work.
5948
5949 Signed-off-by: Stefan Roese <sr@denx.de>
5950
5951commit 136288847e3b04f2ff357a067ad45e10afa0a24c
5952Author: Stefan Roese <sr@denx.de>
5953Date: Thu Dec 13 14:52:53 2007 +0100
5954
5955 ppc4xx: Bring 4xx fdt support up-to-date
5956
5957 This patch update the 4xx fdt support. It enabled fdt booting
5958 on the AMCC Kilauea and Sequoia for now. More can follow later
5959 quite easily.
5960
5961 Signed-off-by: Stefan Roese <sr@denx.de>
5962
5963commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
5964Author: Stefan Roese <sr@denx.de>
5965Date: Thu Dec 27 07:50:54 2007 +0100
5966
5967 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
5968
5969 The check for an sufficiently erased destination was missing in the
5970 buffered write function of the cfi flash driver (when
5971 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
5972 writing to such a region will fail with the currect error message.
5973
5974 Signed-off-by: Stefan Roese <sr@denx.de>
5975
5976commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
5977Author: Martin Krause <martin.krause@tqs.de>
5978Date: Mon Nov 12 10:56:17 2007 +0100
5979
5980 Some configuration updates for the TQM5200 based TB5200 board:
5981
5982 - enable command line history
5983 - increase malloc space (because of bigger flash sectors)
5984
5985 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5986
5987commit e318d9e9021a0af7508171f84ed09d0e79f0284e
5988Author: Martin Krause <martin.krause@tqs.de>
5989Date: Thu Sep 27 11:10:08 2007 +0200
5990
5991 TQM8xx: use the CFI flash driver on all TQM8xx boards
5992
5993 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5994
5995commit 11d9eec479b470eab9242ab937fca70a876d9376
5996Author: Martin Krause <martin.krause@tqs.de>
5997Date: Wed Sep 26 17:55:56 2007 +0200
5998
5999 TQM885D: adjust for doubled flash sector size + some minor fixes
6000
6001 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6002
6003commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
6004Author: Jens Gehrlein <jens.gehrlein@tqs.de>
6005Date: Wed Sep 26 17:55:54 2007 +0200
6006
6007 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
6008
6009 CAS-Latency=2, Write Recovery Time tWR=2
6010 The max. supported bus frequency is 66 MHz. Therefore, changed
6011 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
6012
6013 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6014
6015commit b988b8cd443989be65161888eea0127ad03f846f
6016Author: Martin Krause <martin.krause@tqs.de>
6017Date: Wed Sep 26 17:55:56 2007 +0200
6018
6019 TQM885D: use calculated cpuclk instead of measuring it
6020
6021 On the TQM885D the measurement of cpuclk with the PIT reference
6022 timer ist not necessary. Since all module variants use the same
6023 external 10 MHz oscillator, the cpuclk only depends on the PLL
6024 configuration - which is readable by software.
6025
6026 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6027
6028commit 492c7049869348d31168de8dad89651315e468e0
6029Author: Jens Gehrlein <jens.gehrlein@tqs.de>
6030Date: Thu Sep 27 14:54:46 2007 +0200
6031
6032 TQM885D: fix SDRAM refresh
6033
6034 At 133 MHz the current SDRAM refresh rate is too fast
6035 (measured 4 * 1.17 us).
6036 CFG_MAMR_PTA changes from 39 to 128. This result
6037 in a refresh rate of 4 * 7.8 us at the default clock
6038 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
6039 This is a compromise until a new method is found to
6040 adjust the refresh rate.
6041
6042 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6043
6044commit dabad4b9bc46908e301f73ce76b38b23626a96e9
6045Author: Jens Gehrlein <jens.gehrlein@tqs.de>
6046Date: Thu Sep 27 14:54:46 2007 +0200
6047
6048 TQM860M: Support for 10col SDRAMs, max. 128 MiB
6049
6050 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6051
6052commit 61fb15c516fef5631e305f1976d7b3a679725856
6053Author: Wolfgang Denk <wd@denx.de>
6054Date: Thu Dec 27 01:52:50 2007 +0100
6055
6056 Fix coding style issues; update CHANGELOG.
6057
6058 Signed-off-by: Wolfgang Denk <wd@denx.de>
6059
Wolfgang Denk61fb15c52007-12-27 01:52:50 +01006060commit 467bcee11fe26ad422f2de971aa70866079870f2
6061Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6062Date: Fri Dec 14 15:36:18 2007 +0100
6063
6064 cfi_flash: Add manufacturer-specific fixups
6065
6066 Run fixups based on the JEDEC manufacturer ID independent of the
6067 command set ID.
6068
6069 This changes current behaviour: Previously, geometry reversal for AMD
6070 chips were done based on the command set ID, while they are now done
6071 based on the JEDEC manufacturer and device ID.
6072
6073 Also add fixup for top-boot Atmel chips. A fixup is needed for
6074 AT49BV6416(T) too, but since u-boot currently only reads the low byte
6075 of the device ID, there's no way to tell it apart from AT49BV642D,
6076 which should not have this fixup. Since AT49BV642D support is
6077 necessary to get ATNGW100 board support into mainline, I've commented
6078 out the fixup for now.
6079
6080 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6081
6082commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
6083Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6084Date: Fri Dec 14 15:36:17 2007 +0100
6085
6086 cfi_flash: Add cmdset-specific init functions
6087
6088 Move things like reading JEDEC IDs and fixing up geometry reversal
6089 into separate functions. The geometry reversal fixup is now performed
6090 by altering the qry structure directly, which makes the sector init
6091 code slightly cleaner.
6092
6093 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6094
6095commit e23741f4a6d8047520ef0d4971762749b3587d32
6096Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6097Date: Fri Dec 14 15:36:16 2007 +0100
6098
6099 cfi_flash: Read whole QRY structure in one go
6100
6101 Read out the whole CFI Standard Query structure after successful cfi
6102 identification. This allows subsequent code to access this information
6103 directly without having to go through flash_read_uchar() and friends.
6104
6105 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6106
6107commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
6108Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6109Date: Mon Dec 17 11:02:44 2007 +0100
6110
6111 AVR32: Fix logic inversion in disable_interrupts()
6112
6113 disable_interrupts() should return nonzero if interrupts were
6114 _enabled_ before, not disabled.
6115
6116 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6117
6118commit acac475212cbedb17b321a363a1c878e2b47b37f
6119Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6120Date: Fri Dec 14 16:51:22 2007 +0100
6121
6122 AVR32: Enable interrupts at bootup
6123
6124 The timer code depends on the timer interrupt to keep track of the
6125 upper 32 bits of the cycle counter. This obviously doesn't work when
6126 interrupts are disabled the whole time.
6127
6128 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6129
6130commit 9570bcd87f4db255514f43b6701746c412f8fef0
6131Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6132Date: Thu Nov 15 10:03:45 2007 +0100
6133
6134 AVR32: Fix wrong pin setup for USART3
6135
6136 As reported by Gerhard Berghofer:
6137
6138 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
6139 instead of PB18 and PB19.
6140
6141 which is obviously correct. There's currently no code that uses
6142 USART3, but custom boards may run into problems.
6143
6144 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6145
6146commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
6147Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6148Date: Thu Nov 1 12:44:20 2007 +0100
6149
6150 README: Remove ATSTK1000 daughterboard list
6151
6152 As noted by Kim Phillips, these lists tend to become out of date.
6153
6154 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6155
6156commit c81cbbad21cb0ae983e2e796211202234cdc8be2
6157Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6158Date: Tue Oct 30 14:56:36 2007 +0100
6159
6160 Add ATSTK100[234] to MAINTAINERS
6161
6162 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
6163 "mother". Also update the entry for ATSTK1000 to be not only about the
6164 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
6165
6166 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6167
6168commit 64ff2357b1727213803591813dbc779c924bf772
6169Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6170Date: Mon Oct 29 13:02:54 2007 +0100
6171
6172 AVR32: Add support for the ATSTK1004 board
6173
6174 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
6175 which is a derivative of AT32AP7000.
6176
6177 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6178
6179commit 667568db157f374b85abd7e03596ddd1f0b25681
6180Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6181Date: Mon Oct 29 13:02:54 2007 +0100
6182
6183 AVR32: Add support for the ATSTK1003 board
6184
6185 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
6186 which is a derivative of AT32AP7000.
6187
6188 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6189
6190commit 5fee84a794a51ec830548cda485a770efb018b92
6191Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6192Date: Mon Oct 29 13:23:33 2007 +0100
6193
6194 AVR32: Make some AT32AP700x peripherals optional
6195
6196 Add a chip-features file providing definitions of the form
6197
6198 AT32AP700x_CHIP_HAS_<peripheral>
6199
6200 to indicate the availability of the given peripheral on the currently
6201 selected chip.
6202
6203 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6204
6205commit 36f28f8a9605ee5dcfa330482cfc62171261af97
6206Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6207Date: Mon Oct 29 13:09:56 2007 +0100
6208
6209 AVR32: Rename at32ap7000 -> at32ap700x
6210
6211 The SoC-specific code for all the AT32AP700x CPUs is practically
6212 identical; the only difference is that some chips have less features
6213 than others. By doing this rename, we can add support for the AP7000
6214 derivatives simply by making some features conditional.
6215
6216 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6217
6218commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
6219Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6220Date: Fri Jun 29 18:22:34 2007 +0200
6221
6222 atmel_mci: Show SR when block read fails
6223
6224 Show controller status as well as card status when an error occurs
6225 during block read.
6226
6227 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6228
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01006229commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
6230Author: Stefan Roese <sr@denx.de>
6231Date: Thu Dec 13 14:52:53 2007 +0100
6232
6233 ppc4xx: Bring 4xx fdt support up-to-date
6234
6235 This patch update the 4xx fdt support. It enabled fdt booting
6236 on the AMCC Kilauea and Sequoia for now. More can follow later
6237 quite easily.
6238
6239 Signed-off-by: Stefan Roese <sr@denx.de>
6240
Wolfgang Denk61fb15c52007-12-27 01:52:50 +01006241commit 12d30aa79779c2aa7a998bbae4c075f822a53004
6242Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6243Date: Thu Dec 13 12:56:34 2007 +0100
6244
6245 cfi_flash: Use map_physmem() and unmap_physmem()
6246
6247 Use map_physmem() and unmap_physmem() to convert from physical to
6248 virtual addresses. This gives the arch a chance to provide an uncached
6249 mapping for flash accesses.
6250
6251 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6252
6253commit 4d7d6936eb29af7cca330937808312aa5f61454d
6254Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6255Date: Thu Dec 13 12:56:33 2007 +0100
6256
6257 Introduce map_physmem() and unmap_physmem()
6258
6259 map_physmem() returns a virtual address which can be used to access a
6260 given physical address without involving the cache. unmap_physmem()
6261 should be called when the virtual address returned by map_physmem() is
6262 no longer needed.
6263
6264 This patch adds a stub implementation which simply returns the
6265 physical address cast to a uchar * for all architectures except AVR32,
6266 which converts the physical address to an uncached virtual mapping.
6267 unmap_physmem() is a no-op on all architectures, but if any
6268 architecture needs to do such mappings through the TLB, this is the
6269 hook where those TLB entries can be invalidated.
6270
6271 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6272
6273commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
6274Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6275Date: Thu Dec 13 12:56:32 2007 +0100
6276
6277 cfi_flash: Introduce read and write accessors
6278
6279 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
6280 them to access the flash memory. This makes it clearer when the flash
6281 is actually being accessed; merely dereferencing a volatile pointer
6282 looks just like any other kind of access.
6283
6284 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6285
6286commit 812711ce6b3a386125dcf0d6a59588e461abbb87
6287Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6288Date: Thu Dec 13 12:56:31 2007 +0100
6289
6290 Implement __raw_{read,write}[bwl] on all architectures
6291
6292 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
6293 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
6294 from Linux.
6295
6296 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6297
6298commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
6299Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6300Date: Sat Oct 6 18:55:36 2007 +0200
6301
6302 cfi_flash: Reorder functions and eliminate extra prototypes
6303
6304 Reorder the functions in cfi_flash.c so that each function only uses
6305 functions that have been defined before it. This allows the static
6306 prototype declarations near the top to be eliminated and might allow
6307 gcc to do a better job inlining functions.
6308
6309 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6310
6311commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
6312Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6313Date: Thu Dec 13 12:56:29 2007 +0100
6314
6315 cfi_flash: Make some needlessly global functions static
6316
6317 Make functions not declared in any header file static.
6318
6319 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6320
6321commit 7e5b9b471518c5652febc68ba62b432193d6abf4
6322Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6323Date: Thu Dec 13 12:56:28 2007 +0100
6324
6325 cfi_flash: Break long lines
6326
6327 This patch tries to keep all lines in the cfi_flash driver below 80
6328 columns. There are a few lines left which don't fit this requirement
6329 because I couldn't find any trivial way to break them (i.e. it would
6330 take some restructuring, which I intend to do in a later patch.)
6331
6332 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6333
6334commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
6335Author: Bartlomiej Sieka <tur@semihalf.com>
6336Date: Tue Dec 11 13:59:57 2007 +0100
6337
6338 CFI: synchronize command offsets with Linux CFI driver
6339
6340 Fixes non-working CFI Flash on the Inka4x0 board.
6341
6342 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
6343
6344commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
6345Author: Kumar Gala <galak@kernel.crashing.org>
6346Date: Fri Dec 7 12:17:34 2007 -0600
6347
6348 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
6349
6350 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
6351 (MPC8544DS, MPC8548CDS, MPC8568MDS).
6352
6353 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6354
6355commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
6356Author: Kumar Gala <galak@kernel.crashing.org>
6357Date: Fri Dec 7 12:04:30 2007 -0600
6358
6359 Update Freescale MPC85xx ADS/CDS/MDS board config
6360
6361 * Enabled CONFIG_CMD_ELF
6362
6363 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6364
6365commit d435793229ce29a42797c1edc39f5b34f987f91a
6366Author: Kumar Gala <galak@kernel.crashing.org>
6367Date: Fri Dec 7 04:59:26 2007 -0600
6368
6369 Handle Asynchronous DDR clock on 85xx
6370
6371 The MPC8572 introduces the concept of an asynchronous DDR clock with
6372 regards to the platform clock.
6373
6374 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
6375 mode.
6376
6377 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6378
6379commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
6380Author: Kumar Gala <galak@kernel.crashing.org>
6381Date: Thu Nov 29 10:34:28 2007 -0600
6382
6383 Update Freescale MPC85xx ADS/CDS/MDS board config
6384
6385 * Removed some misc environment setup
6386 * Enabled CONFIG_CMDLINE_EDITING
6387
6388 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6389
6390commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
6391Author: Kumar Gala <galak@kernel.crashing.org>
6392Date: Thu Nov 29 10:47:44 2007 -0600
6393
6394 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
6395
6396 Minor path corrections needed to ensure buildability.
6397
6398 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6399
6400commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
6401Author: Kumar Gala <galak@kernel.crashing.org>
6402Date: Thu Nov 29 10:16:18 2007 -0600
6403
6404 Move the MPC8540 ADS board under board/freescale.
6405
6406 Minor path corrections needed to ensure buildability.
6407
6408 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6409
6410commit 870ceac5b3a3486c109396e005af81ae762b5710
6411Author: Kumar Gala <galak@kernel.crashing.org>
6412Date: Thu Nov 29 10:14:50 2007 -0600
6413
6414 Move the MPC8560 ADS board under board/freescale.
6415
6416 Minor path corrections needed to ensure buildability.
6417
6418 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6419
6420commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
6421Author: Kumar Gala <galak@kernel.crashing.org>
6422Date: Thu Nov 29 10:13:47 2007 -0600
6423
6424 Move the MPC8568 MDS board under board/freescale.
6425
6426 Minor path corrections needed to ensure buildability.
6427
6428 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6429
6430commit a853d56c59b33415304531443633808736acfc6e
6431Author: Kumar Gala <galak@kernel.crashing.org>
6432Date: Thu Nov 29 02:18:59 2007 -0600
6433
6434 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
6435
6436 We already had defines for LAWAR_TRGT_IF_* that we should use
6437 rather than creating new ones. Also, added some missing defines for
6438 PCIE targets.
6439
6440 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6441
6442commit 04db400892da37b76a585e332a0c137954ad2015
6443Author: Kumar Gala <galak@kernel.crashing.org>
6444Date: Thu Nov 29 02:10:09 2007 -0600
6445
6446 Stop using immap_t on 85xx
6447
6448 In the future the offsets to various blocks may not be in same location.
6449 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
6450 instead of getting it via &immap.
6451
6452 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6453
6454commit 2714223f8e04ab3e4133ff65872eef366d90bfea
6455Author: Kumar Gala <galak@kernel.crashing.org>
6456Date: Thu Nov 29 01:23:09 2007 -0600
6457
6458 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
6459
6460 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6461
6462commit c480861bf000156e6a3e932c258db59ff2212dd3
6463Author: Kumar Gala <galak@kernel.crashing.org>
6464Date: Thu Nov 29 01:06:19 2007 -0600
6465
6466 Update MPC8568 MDS to use libfdt
6467
6468 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
6469 ethernet, pci, and serial for the various fixups that are done.
6470
6471 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6472
6473commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
6474Author: Haiying Wang <Haiying.Wang@freescale.com>
6475Date: Wed Nov 14 15:52:06 2007 -0500
6476
6477 Add PCI Express support on MPC8568MDS
6478
6479 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6480 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6481
6482commit b90d25497625b90ffa3f2911a0895ca237556ff5
6483Author: Kumar Gala <galak@kernel.crashing.org>
6484Date: Thu Nov 29 00:11:44 2007 -0600
6485
6486 Update MPC85xx CDS to use libfdt
6487
6488 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
6489 ethernet, pci, and serial for the various fixups that are done.
6490
6491 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6492
6493commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
6494Author: Kumar Gala <galak@kernel.crashing.org>
6495Date: Wed Nov 28 22:54:27 2007 -0600
6496
6497 Update MPC8540 ADS to use libfdt
6498
6499 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
6500 ethernet, pci, and serial for the various fixups that are done.
6501
6502 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6503
6504commit 5ce715802f6c50dc78b3405b92f184b1e3710519
6505Author: Kumar Gala <galak@kernel.crashing.org>
6506Date: Wed Nov 28 22:40:31 2007 -0600
6507
6508 Update MPC8560 ADS to use libfdt
6509
6510 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
6511 ethernet, pci, and serial for the various fixups that are done.
6512
6513 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6514
6515commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
6516Author: Kumar Gala <galak@kernel.crashing.org>
6517Date: Wed Nov 28 00:36:33 2007 -0600
6518
6519 Stop using immap_t for cpm offset on 85xx
6520
6521 In the future the offsets to various blocks may not be in same location.
6522 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
6523 instead of getting it via &immap->im_cpm.
6524
6525 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6526
6527commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
6528Author: Kumar Gala <galak@kernel.crashing.org>
6529Date: Tue Nov 27 23:25:02 2007 -0600
6530
6531 Stop using immap_t for guts offset on 85xx
6532
6533 In the future the offsets to various blocks may not be in same location.
6534 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
6535 instead of getting it via &immap->im_gur.
6536
6537 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6538
6539commit 50c03c8cf494d91cdec39670d95337c743e16ec9
6540Author: Kumar Gala <galak@kernel.crashing.org>
6541Date: Tue Nov 27 22:42:34 2007 -0600
6542
6543 Update MPC8544 DS config
6544
6545 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
6546 * Removed some misc environment setup
6547 * Moved to using fdtfile & fdtaddr as fdt env var names
6548 * Enabled CONFIG_CMDLINE_EDITING
6549
6550 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6551
6552commit addce57e2e4c49e77ffb2020a84690713bb18b47
6553Author: Kumar Gala <galak@kernel.crashing.org>
6554Date: Mon Nov 26 17:12:24 2007 -0600
6555
6556 Update MPC8544DS to use libfdt
6557
6558 Updated the MPC8544DS config to use libfdt and assume use of aliases for
6559 ethernet, pci, and serial for the various fixups that are done.
6560
6561 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6562
6563commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
6564Author: Kumar Gala <galak@kernel.crashing.org>
6565Date: Thu Nov 29 00:15:30 2007 -0600
6566
6567 Add libfdt based ft_cpu_setup for mpc85xx
6568
6569 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6570
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01006571commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
6572Author: Stefan Roese <sr@denx.de>
6573Date: Tue Dec 11 13:38:19 2007 +0100
6574
6575 ppc4xx: Correct GPIO offset in gpio_config()
6576
6577 Thanks to Gary Jennejohn for pointing this out.
6578
6579 Signed-off-by: Stefan Roese <sr@denx.de>
6580
6581commit 8809a2713b1ceaf3da55d9d785470294f15de06a
6582Author: Stefan Roese <sr@denx.de>
6583Date: Tue Dec 11 11:46:01 2007 +0100
6584
6585 rtc: Fix merging problem
6586
6587 Signed-off-by: Stefan Roese <sr@denx.de>
6588
6589commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
6590Author: Stefan Roese <sr@denx.de>
6591Date: Sat Dec 8 14:47:34 2007 +0100
6592
6593 ppc4xx: 405EX: Correctly enable USB pins
6594
6595 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
6596 function control) registers. This is done for the AMCC Kilauea and
6597 Makalu eval boards.
6598
6599 Signed-off-by: Stefan Roese <sr@denx.de>
6600
Wolfgang Denk61fb15c52007-12-27 01:52:50 +01006601commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
6602Author: Stefan Roese <sr@denx.de>
6603Date: Sat Dec 8 08:25:09 2007 +0100
6604
6605 CFI: Coding style cleanup
6606
6607 Signed-off-by: Stefan Roese <sr@denx.de>
6608
6609commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
6610Author: Michael Schwingen <michael@schwingen.org>
6611Date: Fri Dec 7 23:35:02 2007 +0100
6612
6613 CFI: support JEDEC flash roms in CFI-flash framework
6614
6615 The following patch adds support for non-CFI flash ROMS, by hooking into the
6616 CFI flash code and using most of its code, as recently discussed here in the
6617 thread "Mixing CFI and non-CFI flashs".
6618
6619 Signed-off-by: Michael Schwingen <michael@schwingen.org>
6620 Signed-off-by: Stefan Roese <sr@denx.de>
6621
6622commit c01b17dd856fa120b2970f50d9598546a4927ec3
6623Author: Gerald Van Baren <vanbaren@cideas.com>
6624Date: Wed Nov 28 21:24:50 2007 -0500
6625
6626 Conditionally compile fdt_fixup_ethernet()
6627
6628 Fix compiler warnings: On boards that don't have ethernets defined,
6629 don't compile fdt_fixup_ethernet().
6630
6631commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
6632Author: Kumar Gala <galak@kernel.crashing.org>
6633Date: Tue Nov 27 21:59:46 2007 -0600
6634
6635 Convert boards that set memory node to use fdt_fixup_memory()
6636
6637 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6638
6639commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
6640Author: Kumar Gala <galak@kernel.crashing.org>
6641Date: Mon Nov 26 17:06:15 2007 -0600
6642
6643 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
6644
6645 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
6646 determine which serial alias we should set linux,stdout-path to.
6647
6648 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6649
6650commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
6651Author: Kumar Gala <galak@kernel.crashing.org>
6652Date: Mon Nov 26 14:57:45 2007 -0600
6653
6654 Add common memory fixup function
6655
6656 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
6657
6658 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6659
6660commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
6661Author: Kumar Gala <galak@kernel.crashing.org>
6662Date: Mon Nov 26 11:19:12 2007 -0600
6663
6664 Conditionally compile fdt_support.c
6665
6666 Modify common/Makefile to conditionally compile fdt_support.c based
6667 on CONFIG_OF_LIBFDT.
6668
6669 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6670
6671commit d88e7ba0980773479e1a64badb293116071b7ef0
6672Author: Kumar Gala <galak@kernel.crashing.org>
6673Date: Mon Nov 26 10:41:40 2007 -0600
6674
6675 Fix build breakage due to libfdt import
6676
6677 The IDS8247 got lost in the update and need an API update
6678 do to rename of functions in libfdt.
6679
6680 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6681
6682commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
6683Author: Gerald Van Baren <vanbaren@cideas.com>
6684Date: Fri Nov 23 19:43:20 2007 -0500
6685
6686 Add spaces around the = in the fdt print format.
6687
6688 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
6689
6690commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
6691Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6692Date: Fri Dec 7 01:25:38 2007 +0900
6693
6694 sh: Moved driver of the SuperH dependence
6695
6696 The composition of the directory in the drivers/ changed.
6697 I moved SuperH serial driver and marubun PCMCIA driver.
6698
6699 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6700
6701commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
6702Author: Wolfgang Denk <wd@denx.de>
6703Date: Thu Dec 6 10:21:19 2007 +0100
6704
6705 Release v1.3.1
6706
6707 Signed-off-by: Wolfgang Denk <wd@denx.de>
6708
6709commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
6710Author: Wolfgang Denk <wd@denx.de>
6711Date: Thu Dec 6 10:21:03 2007 +0100
6712
6713 ADS5121 Board: fix compile problem.
6714
6715 Signed-off-by: Wolfgang Denk <wd@denx.de>
6716
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01006717commit a27044b14a9e93678a82d7b35f202b93e7687abc
6718Author: Stefan Roese <sr@denx.de>
6719Date: Thu Dec 6 05:58:43 2007 +0100
6720
6721 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
6722
6723 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
6724 setting the FIXD bit in the SDR0_MFR register. Here a description of the
6725 symptoms:
6726
6727 Problem Description
6728 ------------------------------
6729 If a DMA is performed between memory and PCI with the DMA 1 Controller
6730 using prefetch, and as a result uses a special purpose buffer selected by
6731 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
6732 the first part of the transfer sequence is performed twice. The
6733 PPC440SPe PCI Controller requests more data than was needed such that in
6734 the case of enforce memory protection, a host CPU exception can occur.
6735 No data is corrupted, because data transfer is stopped in the PCI
6736 Controller. Prefetch enable is specified by setting DMA Configuration
6737 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
6738
6739 Behavior that may be observed in a running system
6740 ---------------------------------------------------------------------------
6741
6742 1. DMA performance is decreased because of the double access on the PCI bus
6743 interface.
6744 2. If an illegal access to some address on the PCI bus is detected at the
6745 system level, a machine check or similar system error may occur.
6746
6747 Workarounds Available
6748 ----------------------------------
6749
6750 1. Do not program prefetch. Note that a prefetch command cannot be programmed
6751 without selecting a special purpose buffer.
6752 2. To avoid crossing a physical boundary of the PCI slave device, add 512
6753 bytes of address to the PCI address range.
6754
6755 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
6756 from AMCC and slighly changed.
6757
6758 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
6759 Signed-off-by: Stefan Roese <sr@denx.de>
6760
6761commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
6762Author: Stefan Roese <sr@denx.de>
6763Date: Tue Dec 4 16:29:48 2007 +0100
6764
6765 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
6766
6767 Signed-off-by: Stefan Roese <sr@denx.de>
6768
Wolfgang Denk61fb15c52007-12-27 01:52:50 +01006769commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
6770Author: Wolfgang Denk <wd@denx.de>
6771Date: Mon Dec 3 00:15:28 2007 +0100
6772
6773 Prepare for 1.3.1-rc1
6774
6775 Signed-off-by: Wolfgang Denk <wd@denx.de>
6776
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01006777commit e15e33433e7c05111968dc9b434a52fd42cbd221
6778Author: Stefan Roese <sr@denx.de>
6779Date: Fri Nov 30 07:15:41 2007 +0100
6780
6781 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
6782
6783 This manual PCIe reset triggering solves the problem seen with the
6784 Intel EPRO/1000 card, which was not detected (link not established)
6785 upon power-up reset.
6786
6787 Signed-off-by: Stefan Roese <sr@denx.de>
6788
Wolfgang Denk61fb15c52007-12-27 01:52:50 +01006789commit 260eea5676ca46903a335686cc020b29c4ca46fe
6790Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6791Date: Thu Nov 29 01:21:54 2007 +0900
6792
6793 sh: Add SuperH boards maintainer to MAINTAINERS file
6794
6795 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
6796
6797 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6798
6799commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
6800Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6801Date: Thu Nov 29 00:13:04 2007 +0900
6802
6803 sh: Add ms7750se support in MAKEALL
6804
6805 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6806
6807commit c7144373427a178332bf9754131c8c34c52c200a
6808Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6809Date: Tue Nov 27 09:44:53 2007 +0100
6810
6811 sh: Add sh3 and sh4 support in MAKEALL
6812
6813 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6814 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6815
6816commit 130080874a3d28450098481a262c5f7c855e908d
6817Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6818Date: Sun Nov 25 02:51:17 2007 +0900
6819
6820 sh: Add document for SuperH.
6821
6822 This document is a summary of information concerning SuperH of U-Boot.
6823
6824 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6825
6826commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
6827Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6828Date: Sun Nov 25 02:39:31 2007 +0900
6829
6830 sh: Add marubun's pcmcia driver
6831
6832 Marubun pcmcia is a chip for PCMCIA used with SuperH.
6833 Of course, this can be used even by other architectures.
6834 When use this driver, came to be able to use CompactFlash
6835 and Ethernet.
6836
6837 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6838
6839commit febd86b969b975289ed948f1ac0eb9722da41ced
6840Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6841Date: Sun Nov 25 02:32:13 2007 +0900
6842
6843 sh: Update SuperH SCIF driver
6844
6845 - Changed volatile unsigned to vu_.
6846 - Changed Makefile for kconfig.
6847
6848 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6849
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01006850commit 8be760903645af09871be50ad0a6f9ebb62b311d
6851Author: Stefan Roese <sr@denx.de>
6852Date: Tue Nov 27 11:57:35 2007 +0100
6853
6854 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
6855
6856 After an error in the AMCC 405EX users manual now correctly configure
6857 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
6858 usage.
6859
6860 Signed-off-by: Stefan Roese <sr@denx.de>
6861
Wolfgang Denk8d4f0402007-12-03 00:15:28 +01006862commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
6863Author: Wolfgang Denk <wd@denx.de>
6864Date: Mon Nov 26 19:18:21 2007 +0100
6865
6866 Cleanup coding style; update CHANGELOG
6867
6868 Signed-off-by: Wolfgang Denk <wd@denx.de>
6869
6870commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
6871Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6872Date: Sun Nov 25 22:39:25 2007 +0100
6873
6874 MAKEALL: add missing 512x boards in ppc
6875
6876 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6877
6878commit a340c325e668ca7386c2276387681720be9c3757
6879Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6880Date: Sun Nov 25 18:45:47 2007 +0100
6881
6882 Makefile : fix tags ctags etags with new drivers organization
6883
6884 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6885
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01006886commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
6887Author: Stefan Roese <sr@denx.de>
6888Date: Mon Nov 26 15:06:14 2007 +0100
6889
6890 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
6891
6892 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
6893 operation.
6894
6895 Signed-off-by: Stefan Roese <sr@denx.de>
6896
6897commit ca1ce226287270bb01e25b8e3674c701f12edf19
6898Author: Stefan Roese <sr@denx.de>
6899Date: Mon Nov 26 15:01:45 2007 +0100
6900
6901 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
6902
6903 Signed-off-by: Stefan Roese <sr@denx.de>
6904
Wolfgang Denka5f601f2007-11-26 19:18:21 +01006905commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
6906Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6907Date: Sun Nov 25 18:45:47 2007 +0100
6908
6909 Makefile : fix tags ctags etags with new drivers organization
6910
6911 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6912
6913commit 59829cc189378c142c13d2aa8d9a897d8bef3961
6914Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6915Date: Sat Nov 24 21:26:56 2007 +0100
6916
6917 drivers/mtd : move mtd drivers to drivers/mtd
6918
6919 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6920
6921commit 318c0b90431f2648552e5ade78833f42652ce859
6922Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6923Date: Sat Nov 24 21:17:55 2007 +0100
6924
6925 drivers/misc : move misc drivers to drivers/misc
6926
6927 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6928
6929commit 33daf5b7858807cb4ce4158c2c56524671c14c08
6930Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6931Date: Sat Nov 24 21:13:59 2007 +0100
6932
6933 drivers/block : move block drivers to drivers/block
6934
6935 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6936
6937commit 0c698dcaa70275eb8814f665b545547cee013892
6938Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6939Date: Sat Nov 24 20:59:50 2007 +0100
6940
6941 drivers/rtc : move rtc drivers to drivers/rtc
6942
6943 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6944
6945commit f868cc5a50757d94f36c312395481cb0f187d9e6
6946Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6947Date: Sat Nov 24 20:14:44 2007 +0100
6948
6949 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
6950
6951 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6952
6953commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
6954Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6955Date: Sat Nov 24 19:46:45 2007 +0100
6956
6957 drivers/input : move input drivers to drivers/input
6958
6959 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6960
6961commit e4558666293364fc3af1c1d9381ca933fa0f1275
6962Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6963Date: Sat Nov 24 19:40:11 2007 +0100
6964
6965 drivers/usb : move usb drivers to drivers/usb
6966
6967 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6968
6969commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
6970Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6971Date: Sat Nov 24 19:33:38 2007 +0100
6972
6973 drivers/serial : move serial drivers to drivers/serial
6974
6975 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6976
6977commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
6978Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6979Date: Wed Nov 21 21:19:24 2007 +0100
6980
6981 drivers/net : move net drivers to drivers/net
6982
6983 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6984
6985commit 352d259130b349fe9593b8dada641bd78a9659e5
6986Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6987Date: Tue Nov 20 20:41:48 2007 +0100
6988
6989 drivers/video : move video drivers to drivers/video
6990
6991 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6992
6993commit 73646217186aa17afc8e305c5f06f06dd335eaad
6994Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6995Date: Tue Nov 20 20:33:09 2007 +0100
6996
6997 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
6998
6999 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7000
7001commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
7002Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7003Date: Tue Nov 20 20:28:09 2007 +0100
7004
7005 drivers/pci : move pci drivers to drivers/pci
7006
7007 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7008
7009commit 9162352817579840d7802da6d85872b3ca003c97
7010Author: Gerald Van Baren <vanbaren@cideas.com>
7011Date: Thu Nov 22 17:23:23 2007 -0500
7012
7013 Fix fdt printing for updated libfdt
7014
7015 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
7016
7017 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7018
7019commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
7020Author: Kumar Gala <galak@kernel.crashing.org>
7021Date: Wed Nov 21 13:30:15 2007 -0600
7022
7023 Add additional fdt fixup helper functions
7024
7025 Added the following fdt fixup helpers:
7026 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
7027 * do_fixup_by_compat{_u32} - Find matching nodes by compat
7028
7029 The _u32 variants work the same only the property they are setting
7030 is know to be a 32-bit integer instead of a byte buffer.
7031
7032 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7033
7034commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
7035Author: Kumar Gala <galak@kernel.crashing.org>
7036Date: Wed Nov 21 11:11:03 2007 -0600
7037
7038 Add fdt_fixup_ethernet helper to set mac addresses
7039
7040 Added a fixup helper that uses aliases to set mac addresses
7041 in the device tree based on the bd_t
7042
7043 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7044
7045commit dbaf07ce620aab249e3502b20a986234a6af1d3a
7046Author: Kumar Gala <galak@kernel.crashing.org>
7047Date: Wed Nov 21 14:07:46 2007 -0600
7048
7049 Fix warnings from import of libfdt
7050
7051 cmd_fdt.c: In function fdt_print:
7052 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
7053 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
7054 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
7055 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
7056
7057 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7058
7059commit 8d04f02f6224e6983f4812ea4da704950ec8539c
7060Author: Kumar Gala <galak@kernel.crashing.org>
7061Date: Wed Oct 24 11:04:22 2007 -0500
7062
7063 Update libfdt from device tree compiler (dtc)
7064
7065 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
7066 the device tree compiler (dtc) project.
7067
7068 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7069
7070commit e93becf80d732b64aef81b23e8b6ece02c40533d
7071Author: Kumar Gala <galak@kernel.crashing.org>
7072Date: Sat Nov 3 19:46:28 2007 -0500
7073
7074 Move do_fixup* for libfdt into common code
7075
7076 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
7077 into common/fdt_support.c and renamed:
7078
7079 do_fixup() -> do_fixup_by_path()
7080 do_fixup_u32() -> do_fixup_by_path_u32()
7081
7082 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7083
7084commit f738b4a75998f42a7408defadc9baac7a31c92db
7085Author: Kumar Gala <galak@kernel.crashing.org>
7086Date: Thu Oct 25 16:15:07 2007 -0500
7087
7088 Make no options to fdt print default to '/'
7089
7090 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7091
7092commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
7093Author: Kumar Gala <galak@kernel.crashing.org>
7094Date: Wed Oct 24 10:21:57 2007 -0500
7095
7096 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
7097
7098 Removed:
7099 fdt_node_is_compatible
7100 fdt_find_node_by_type
7101 fdt_find_compatible_node
7102
7103 To ease merge of newer libfdt as we aren't using them anywhere at this time.
7104
7105 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
7106 reason.
7107
7108 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7109
7110commit 98e2867cc85409b919f862e6c16026461ec955df
7111Author: Grant Likely <grant.likely@secretlab.ca>
7112Date: Wed Nov 21 09:19:37 2007 -0700
7113
7114 [BUILD] Remove libraries when updating autoconf.mk
7115
7116 Fix library problems caused by conditional compilation. Using
7117 autoconf.mk to decide which files to compile has caused a problem when
7118 changing configuration from one board to another without clearing out
7119 the library (*.a) files.
7120
7121 It used to be that the linker was always passed the same list of .o
7122 files when building the .a files. However, that is not longer true
7123 with conditional compilation. Now, a different board config will have
7124 a different file list passed to the linker. The problem occurs when
7125 a library has already been built and the board config is changed.
7126
7127 Since the linker will update instead of replace a preexisting library,
7128 then if the file list changes to remove some object files the old
7129 objects will still exist in the library.
7130
7131 The solution is to remove all old library files when autoconf.mk is
7132 made.
7133
7134 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7135
7136commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
7137Author: Kumar Gala <galak@kernel.crashing.org>
7138Date: Wed Nov 21 08:49:50 2007 -0600
7139
7140 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
7141
7142 Modify libfdt/Makefile to conditionally compile the *.c files based
7143 on the board config.
7144
7145 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7146
7147commit 4a43719a7738712811d822ca8125427b27a55cdc
7148Author: Grant Likely <grant.likely@secretlab.ca>
7149Date: Mon Sep 24 09:05:31 2007 -0600
7150
7151 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
7152
7153 Modify common/Makefile to conditionally compile the cmd_*.c files based
7154 on the board config.
7155
7156 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7157
7158commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
7159Author: Grant Likely <grant.likely@secretlab.ca>
7160Date: Mon Sep 24 09:05:31 2007 -0600
7161
7162 [BUILD] Generate include/autoconf.mk from board config files
7163
7164 Use cpp and sed to postprocess config.h and import the defined values
7165 into include/autoconf.mk. autoconf.mk is then included by config.mk to
7166 give 'make' access to the board configuration.
7167
7168 Doing this enables conditional compilation at the Makefile level instead
7169 of by wrapping every .c file with #ifdef/#endif wrappers.
7170
7171 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7172
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007173commit 68b88999da87ab88e71e1306192905be3450198e
7174Author: Jon Loeliger <jdl@freescale.com>
7175Date: Tue Nov 20 15:02:26 2007 -0600
7176
7177 8610HPCD: Enable the 8610 Display Interface Unit
7178
7179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7180
7181commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
7182Author: Jon Loeliger <jdl@freescale.com>
7183Date: Tue Nov 20 15:00:53 2007 -0600
7184
7185 Move 8610 DIU interface structure definitions to header file.
7186
7187 These two structures are still needed during the
7188 initialization and setup of the DIU hardware.
7189 So move them to the fsl_diu_fb.h file for now.
7190 Official "blah".
7191
7192 Noticed-by: York Sun <yorksun@freescale.com>
7193 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7194
Wolfgang Denka5f601f2007-11-26 19:18:21 +01007195commit 080c646dbf474a109c3f85718fb01ce042a38c45
7196Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7197Date: Tue Nov 20 20:14:18 2007 +0100
7198
7199 drivers/i2c : move i2c drivers to drivers/i2c
7200
7201 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7202
7203commit 9a337ddc154a10a26f117fd147b009abcdeba75a
7204Author: Wolfgang Denk <wd@denx.de>
7205Date: Mon Nov 19 22:20:24 2007 +0100
7206
7207 Prepare for 1.3.0 release.
7208
7209 Signed-off-by: Wolfgang Denk <wd@denx.de>
7210
Wolfgang Denk9a337dd2007-11-19 22:20:24 +01007211commit f30ad49b16bf998b03c1a5228b6c86369d61c258
7212Author: Haiying Wang <Haiying.Wang@freescale.com>
7213Date: Mon Nov 19 10:02:13 2007 -0500
7214
7215 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
7216
7217 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
7218
7219 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7220
7221commit f8c320609366176b31104d9bf5e295232e1c7f1d
7222Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7223Date: Mon Nov 19 11:14:16 2007 +0900
7224
7225 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
7226
7227 lowlevel_init.S: Assembler messages:
7228 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
7229
7230 Looking at codes, the `memtest' and `clearmem' are intentional mixed
7231 use of `global symbols' and `label' for debugging purpose. To make it
7232 build, just disable global-symbols-use for now. As a result `memtest'
7233 still remains as unused, but leave it be...
7234
7235 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7236
7237commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
7238Author: Wolfgang Denk <wd@denx.de>
7239Date: Mon Nov 19 12:59:14 2007 +0100
7240
7241 Fix build problems with mp2usb board
7242
7243 Signed-off-by: Wolfgang Denk <wd@denx.de>
7244
7245commit 6bf4c686afca1e86e1c384d59218f914605713bf
7246Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7247Date: Sun Nov 18 18:36:11 2007 +0100
7248
7249 s3c24x0: Fix usb_ohci.c missing in Makefile
7250 and usb_ohci.c warning differ in signedness
7251
7252 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7253
7254commit 6073f61e078da5ddb521b56256bcc36508589883
7255Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7256Date: Sun Nov 18 12:55:02 2007 +0100
7257
7258 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
7259
7260 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7261
7262commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
7263Author: Wolfgang Denk <wd@denx.de>
7264Date: Sun Nov 18 17:11:09 2007 +0100
7265
7266 Fix compiler warnings for ARM systems.
7267
7268 Signed-off-by: Wolfgang Denk <wd@denx.de>
7269
7270commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
7271Author: Wolfgang Denk <wd@denx.de>
7272Date: Sun Nov 18 16:36:27 2007 +0100
7273
7274 Fix compiler warnings for PPC systems. Update CHANGELOG.
7275
7276 Signed-off-by: Wolfgang Denk <wd@denx.de>
7277
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007278commit 653811a3c2b35856bf12e196dcc8c4694e28e420
7279Author: Stefan Roese <sr@denx.de>
7280Date: Sun Nov 18 14:44:44 2007 +0100
7281
7282 ppc4xx: Correct 405EX PCIe UTL register mapping
7283
7284 Map 4k mem space for UTL registers for each port.
7285
7286 Signed-off-by: Stefan Roese <sr@denx.de>
7287
Wolfgang Denk409ecdc2007-11-18 16:36:27 +01007288commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
7289Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7290Date: Sat Nov 17 11:31:10 2007 +0100
7291
7292 Fix warning differ in signedness in net/net.c and net/nfs.c
7293
7294commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
7295Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7296Date: Sat Nov 17 20:42:45 2007 +0900
7297
7298 gth2.c: Fix a warning on gth2 build.
7299
7300 gth2.c: In function 'misc_init_r':
7301 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
7302
7303 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7304
7305commit 2309c130aa4c84b91bd874a41269c923eb61b555
7306Author: Stefan Roese <sr@denx.de>
7307Date: Sat Nov 17 07:58:25 2007 +0100
7308
7309 Fix warning differ in signedness in common/cmd_scsi.c
7310
7311 Signed-off-by: Stefan Roese <sr@denx.de>
7312
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007313commit 9ea61b57968554eaf0f474ec7e088b17d367f474
7314Author: Stefan Roese <sr@denx.de>
7315Date: Sat Nov 17 14:52:29 2007 +0100
7316
7317 ppc4xx: Update AMCC Kilauea config file
7318
7319 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
7320
7321 Signed-off-by: Stefan Roese <sr@denx.de>
7322
Wolfgang Denk409ecdc2007-11-18 16:36:27 +01007323commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
7324Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7325Date: Sat Nov 17 20:05:26 2007 +0900
7326
7327 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
7328
7329 Current trick to pick up GNU assembler minor version does not work with the
7330 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
7331 "(GNU Binutils) ".
7332
7333 $ sde-as --version |grep "GNU assembler"
7334 GNU assembler 2.15.94 mipssde-6.02.02-20050602
7335 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
7336 2.15.94
7337 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
7338 15
7339 $
7340
7341 $ mips-linux-as --version |grep "GNU assembler"
7342 GNU assembler (GNU Binutils) 2.18
7343 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
7344 (GNU
7345 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
7346 (no output)
7347 $
7348
7349 As a result of above, you'll see many noises with such binutils:
7350
7351 make -C cpu/mips/
7352 /bin/sh: line 0: [: : integer expression expected
7353 /bin/sh: line 0: [: : integer expression expected
7354 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
7355 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
7356 /bin/sh: line 0: [: : integer expression expected
7357 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
7358 /bin/sh: line 0: [: : integer expression expected
7359 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
7360 /bin/sh: line 0: [: : integer expression expected
7361
7362 This patch simplifies the trick and makes it work with both versions of gas.
7363 I also replace an expensive `awk (or gawk)' with `cut'.
7364
7365 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7366
7367commit 16664f72850846e645616da1c0fa5afcd6d15f15
7368Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7369Date: Sat Nov 17 20:05:26 2007 +0900
7370
7371 [MIPS] Remove useless instructions for initializing $gp.
7372
7373 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7374
7375commit 03c031d5660ea946c39af6e2e16267da857c609f
7376Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7377Date: Sat Oct 27 15:27:06 2007 +0900
7378
7379 [MIPS] MIPS 4K core: Coding style cleanups
7380
7381 No logical changes.
7382
7383 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7384
7385commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
7386Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7387Date: Sat Nov 17 20:05:20 2007 +0900
7388
7389 [MIPS] gth2.c: Fix a warning on gth2 build.
7390
7391 gth2.c: In function 'misc_init_r':
7392 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
7393
7394 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7395
7396commit 4fbd0741b2b6441da10be93e10267122581b7079
7397Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7398Date: Sat Oct 27 15:22:33 2007 +0900
7399
7400 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
7401
7402 au1x00_eth.c: In function 'au1x00_miiphy_write':
7403 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
7404
7405 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7406
7407commit f01320459736f156707425cf8112f98606301aa4
7408Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7409Date: Sat Oct 27 15:00:25 2007 +0900
7410
7411 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
7412
7413 au1x00_eth.c: In function 'au1x00_enet_initialize':
7414 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
7415 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
7416 au1x00_eth.c:246: error: for each function it appears in.)
7417 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
7418 au1x00_eth.c: In function 'au1x00_miiphy_write':
7419 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
7420 make[1]: *** [au1x00_eth.o] Error 1
7421
7422 Fixed by moving these two functions forward.
7423
7424 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7425
7426commit b09258c5393edd1087c5f39ae68338f16b49f8b3
7427Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7428Date: Sat Oct 27 15:00:25 2007 +0900
7429
7430 MAKEALL: Added missing pb1000 board
7431
7432 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7433
7434commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
7435Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7436Date: Sat Oct 27 15:00:24 2007 +0900
7437
7438 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
7439
7440 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7441
7442commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
7443Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7444Date: Sat Oct 27 15:00:24 2007 +0900
7445
7446 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
7447
7448 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7449
7450commit 5947f6999aafa7c54c1390983d264a8463dfea8e
7451Author: Wolfgang Denk <wd@denx.de>
7452Date: Sat Nov 17 02:34:38 2007 +0100
7453
7454 Update CHANGELOIG, prepare for -rc4
7455
7456 Signed-off-by: Wolfgang Denk <wd@denx.de>
7457
Wolfgang Denk5947f692007-11-17 02:34:38 +01007458commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
7459Author: Luotao Fu <l.fu@pengutronix.de>
7460Date: Wed Nov 14 18:58:33 2007 +0100
7461
7462 Fix the i2c frequency and default address in rsdproto board
7463
7464 rsdproto board support has wrong I2C frequency and wrong return value
7465 handling.
7466
7467 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
7468
7469commit 429c180edad038f91c989cb14b478228092e7054
7470Author: Wolfgang Denk <wd@denx.de>
7471Date: Sat Nov 17 01:45:38 2007 +0100
7472
7473 powerpc: Backout relocation changes for MPC5121, too.
7474
7475 Apply Grant Likely's backout to MPC5121 code, too.
7476
7477 Pointed out by Rafal Jaworowski <raj@semihalf.com>
7478
7479 Signed-off-by: Wolfgang Denk <wd@denx.de>
7480
7481commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
7482Author: Grant Likely <grant.likely@secretlab.ca>
7483Date: Tue Nov 13 22:18:33 2007 -0700
7484
7485 powerpc: Backout relocation changes.
7486
7487 Ugh. I *hate* to back this change out, but these compiler flags don't
7488 work for relocation on all versions of GCC. I've not been able to
7489 reproduce the environment in my setup (and hence, not been able to
7490 find a combination that *does* work), so I've got no choice but to go
7491 back to the old gcc flags and linker script.
7492
7493 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7494
7495commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
7496Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7497Date: Tue Nov 13 09:11:05 2007 +0100
7498
7499 Fixed mips_io_port_base build errors.
7500
7501 This patch has been sent on:
7502 - 29 Sep 2007
7503
7504 Although mips_io_port_base is currently a part of IDE command, it is quite
7505 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
7506 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
7507
7508 This patch is triggered by multiple definition of `mips_io_port_base' build
7509 error on gth2 (and tb0229 also needs this fix.)
7510
7511 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
7512 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
7513 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
7514 make: *** [u-boot] Error 1
7515
7516 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7517 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7518
7519commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
7520Author: Wolfgang Denk <wd@denx.de>
7521Date: Sat Nov 17 01:30:40 2007 +0100
7522
7523 Fix a bug in the slave serial programming mode for the Xilinx
7524 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
7525 the most significant bit was set, which did not work on any
7526 architecture where "char" defaulted to be an unsigned type.
7527
7528 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
7529
7530 Signed-off-by: Wolfgang Denk <wd@denx.de>
7531
7532commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
7533Author: Jon Loeliger <jdl@freescale.com>
7534Date: Thu Nov 1 12:23:29 2007 -0500
7535
7536 86xx: Fix broken variable reference when #def DEBUGing.
7537
7538 Sometimes you can't reference the DDR2 controller variables.
7539
7540 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7541
7542commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
7543Author: Jason Jin <Jason.jin@freescale.com>
7544Date: Fri Oct 26 18:32:00 2007 +0800
7545
7546 make 8610 board use pixis reset
7547
7548 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7549
7550commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
7551Author: Jason Jin <Jason.jin@freescale.com>
7552Date: Mon Oct 29 19:26:21 2007 +0800
7553
7554 Unify pixis_reset altbank across board families
7555
7556 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
7557 into the separate board config files.
7558
7559 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7560 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7561
7562commit 64bf555465c7926be13e1046ac0d0f05ac72829c
7563Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7564Date: Wed Nov 7 08:19:21 2007 +0100
7565
7566 Fix warning: pointer targets in assignment differ in signedness
7567
7568 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7569
7570commit 7a60ee7c6248a958c5757d3660a1702723a2786d
7571Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7572Date: Wed Nov 7 08:19:19 2007 +0100
7573
7574 Fix warning differ in signedness in common/cmd_ide.c
7575
7576 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7577
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007578commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
7579Author: Stefan Roese <sr@denx.de>
7580Date: Fri Nov 16 14:16:54 2007 +0100
7581
7582 ppc4xx: Enable 405EX PCIe UTL register configuration
7583
7584 Till now the UTL registers on 405EX were not initialized but left with
7585 their default values. This patch new initializes some of the UTL
7586 registers on 405EX.
7587
7588 Signed-off-by: Stefan Roese <sr@denx.de>
7589
7590commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
7591Author: Stefan Roese <sr@denx.de>
7592Date: Fri Nov 16 14:00:59 2007 +0100
7593
7594 ppc4xx: Update AMCC Makalu for board rev 1.1
7595
7596 This patch adds changes needed for Makalu rev 1.1:
7597
7598 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
7599 - Enable 2nd ethernet port EMAC1
7600 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
7601 - Reset PCIe ports via GPIO upon bootup
7602
7603 Signed-off-by: Stefan Roese <sr@denx.de>
7604
Wolfgang Denka5f601f2007-11-26 19:18:21 +01007605commit 4d4faae65e115e327425cd514c1a35146a85166b
7606Author: Grant Likely <grant.likely@secretlab.ca>
7607Date: Mon Sep 24 09:05:31 2007 -0600
7608
7609 Group PCI and PCMCIA drivers in drivers/Makefile
7610
7611 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7612
7613commit 5798f87dc10a496d79d3177b9f5a76488987fd35
7614Author: Grant Likely <grant.likely@secretlab.ca>
7615Date: Mon Sep 24 09:05:31 2007 -0600
7616
7617 Group block/flash drivers in drivers/Makefile
7618
7619 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7620
7621commit df58c81551700f058b44cacf55a7997fa63bfe0a
7622Author: Grant Likely <grant.likely@secretlab.ca>
7623Date: Mon Sep 24 09:05:31 2007 -0600
7624
7625 Group USB drivers in drivers/Makefile
7626
7627 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7628
7629commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
7630Author: Grant Likely <grant.likely@secretlab.ca>
7631Date: Mon Sep 24 09:05:30 2007 -0600
7632
7633 Group i2c drivers in drivers/Makefile
7634
7635 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7636
7637commit ec00c76de0e5971273905998d62d6bb119324218
7638Author: Grant Likely <grant.likely@secretlab.ca>
7639Date: Mon Sep 24 09:05:30 2007 -0600
7640
7641 Group console drivers in drivers/Makefile
7642
7643 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7644
7645commit 754f230aa01b8c789fc31f8013c2487954073300
7646Author: Grant Likely <grant.likely@secretlab.ca>
7647Date: Mon Sep 24 09:05:30 2007 -0600
7648
7649 Group network drivers in drivers/Makefile
7650
7651 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7652
7653commit f0037c56b0d12cd46215124667b9f83d60ef9391
7654Author: Grant Likely <grant.likely@secretlab.ca>
7655Date: Mon Sep 24 09:05:30 2007 -0600
7656
7657 Build: split COBJS value into multiple lines
7658
7659 This change is in preparation for condtitionial compile support in the
7660 build system. By spliting them all into seperate lines now, subsequent
7661 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
7662 be less invasive and easier to review
7663
7664 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7665
7666commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
7667Author: Grant Likely <grant.likely@secretlab.ca>
7668Date: Mon Sep 24 09:05:30 2007 -0600
7669
7670 Add .gitignore files
7671
7672 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7673 Acked-by: Kim Phillips <kim.phillips@freescale.com>
7674
Wolfgang Denk5947f692007-11-17 02:34:38 +01007675commit 955413f35f054a82e40042f1dbcf501c6a05719b
7676Author: Grant Likely <grant.likely@secretlab.ca>
7677Date: Thu Nov 15 08:27:52 2007 -0700
7678
7679 Revert "Correct relocation fixup for mpc5xx"
7680
7681 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
7682 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7683
7684commit e15633888a058aacb31a62d2cf1278e1e4c236ab
7685Author: Grant Likely <grant.likely@secretlab.ca>
7686Date: Thu Nov 15 08:24:32 2007 -0700
7687
7688 Revert "Correct fixup relocation for MPC5xxx"
7689
7690 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
7691 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7692
7693commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
7694Author: Grant Likely <grant.likely@secretlab.ca>
7695Date: Thu Nov 15 08:21:04 2007 -0700
7696
7697 Revert "Correct fixup relocation for mpc8220"
7698
7699 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
7700 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7701
7702commit 70922342369e5e39b286fe21e768a239ca07a514
7703Author: Grant Likely <grant.likely@secretlab.ca>
7704Date: Thu Nov 15 08:20:57 2007 -0700
7705
7706 Revert "Correct fixup relocation for mpc824x"
7707
7708 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
7709 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7710
7711commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
7712Author: Grant Likely <grant.likely@secretlab.ca>
7713Date: Thu Nov 15 08:20:50 2007 -0700
7714
7715 Revert "Correct fixup relocation for mpc8260"
7716
7717 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
7718 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7719
7720commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
7721Author: Grant Likely <grant.likely@secretlab.ca>
7722Date: Thu Nov 15 08:20:43 2007 -0700
7723
7724 Revert "Correct fixup relocation for mpc83xx"
7725
7726 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
7727 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7728
7729commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
7730Author: Grant Likely <grant.likely@secretlab.ca>
7731Date: Thu Nov 15 08:20:25 2007 -0700
7732
7733 Revert "[MPC512x] Correct fixup relocation"
7734
7735 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
7736 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7737
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007738commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
7739Author: Stefan Roese <sr@denx.de>
7740Date: Thu Nov 15 14:25:09 2007 +0100
7741
7742 ppc4xx: Small AMCC Kilauea cleanup
7743
7744 Remove not needed pci_target_init() function.
7745
7746 Signed-off-by: Stefan Roese <sr@denx.de>
7747
7748commit aee747f19b460a0e9da20ff21e90fdaac1cec359
7749Author: Stefan Roese <sr@denx.de>
7750Date: Thu Nov 15 14:23:55 2007 +0100
7751
7752 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
7753
7754 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
7755 - Cleanup of the 4xx GPIO functions
7756 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
7757
7758 Signed-off-by: Stefan Roese <sr@denx.de>
7759
7760commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
7761Author: Stefan Roese <sr@denx.de>
7762Date: Thu Nov 15 14:20:08 2007 +0100
7763
7764 ppc4xx: AMCC Taihu board config file cleanup
7765
7766 This patch makes the AMCC Taihu a little more compatible to the other
7767 AMCC eval boards.
7768
7769 Signed-off-by: Stefan Roese <sr@denx.de>
7770
7771commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
7772Author: Marian Balakowicz <m8@semihalf.com>
7773Date: Thu Nov 15 13:37:28 2007 +0100
7774
7775 [INKA4x0] NG hardware: flash support
7776
7777 Disabled and remove inka4x0 custom flash driver, use CFI flash
7778 driver instead.
7779
7780 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7781
7782commit 5fb6d7191e206cdde0e23140fd8111caed93a595
7783Author: Marian Balakowicz <m8@semihalf.com>
7784Date: Thu Nov 15 13:29:55 2007 +0100
7785
7786 [INKA4x0] NG hardware: SDRAM support
7787
7788 Add support for three new DDR chips that may be present on a NG
7789 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
7790
7791 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
7792
7793 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7794
7795commit f23cb34c367bb27585a4fdb8a75277370e7d0596
7796Author: Marian Balakowicz <m8@semihalf.com>
7797Date: Thu Nov 15 13:24:43 2007 +0100
7798
7799 [INKA4x0] NG hardware: platform code update
7800
7801 - Cleanup compile warnings.
7802 - Add missing '\0' in default environment.
7803 - Increase CFG_MONITOR_LEN to 256 KiB.
7804 - Add required CFG_USE_PPCENV.
7805
7806 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7807
7808commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
7809Author: Peter Pearse <peter.pearse@arm.com>
7810Date: Thu Nov 15 08:58:00 2007 +0000
7811
7812 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
7813 Remove warnings re onenand_read() & write()
7814
7815commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
7816Author: Peter Pearse <peter.pearse@arm.com>
7817Date: Thu Nov 15 08:45:13 2007 +0000
7818
7819 Correction patch
7820
7821commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
7822Author: Roy Zang <tie-fei.zang@freescale.com>
7823Date: Thu Sep 13 18:52:28 2007 +0800
7824
7825 Enable ULi1575 Ethernet support in 8610HPCD config
7826
7827 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7828 Acked-by: Jon Loeliger <jdl@freescale.com>
7829
Wolfgang Denk5947f692007-11-17 02:34:38 +01007830commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
7831Author: Stefan Roese <sr@denx.de>
7832Date: Tue Nov 13 08:18:20 2007 +0100
7833
7834 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
7835
7836 Signed-off-by: Stefan Roese <sr@denx.de>
7837
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007838commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
7839Author: Stefan Roese <sr@denx.de>
7840Date: Tue Nov 13 08:06:11 2007 +0100
7841
7842 ppc4xx: Fix 405EX PCIe UTLSET register setup
7843
7844 Signed-off-by: Stefan Roese <sr@denx.de>
7845
Wolfgang Denk5947f692007-11-17 02:34:38 +01007846commit 1ce55151c85d068f70317a8d65c61058b891afb4
7847Author: Heiko Schocher <hs@denx.de>
7848Date: Tue Nov 13 07:50:29 2007 +0100
7849
7850 [UC101] SRAM now with 2 MB working.
7851
7852 Signed-off-by: Heiko Schocher <hs@denx.de>
7853
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007854commit 2d14684341109a69616e4d6016cd61402d55086f
7855Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7856Date: Fri Nov 9 15:37:53 2007 +0100
7857
7858 ppc4xx: Use generic usb-ohci driver for sequoia board
7859
7860 This patch makes the sequoia board use the generic usb-ohci driver
7861 instead of cpu/ppc4xx/usb_ohci.c.
7862
7863 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7864 Signed-off-by: Stefan Roese <sr@denx.de>
7865
7866commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
7867Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7868Date: Fri Nov 9 15:37:23 2007 +0100
7869
7870 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
7871
7872 This patch disables the 44x d-cache on 'usb start' and
7873 reenables it on 'usb stop'. This should be seen as a
7874 temporary fix until the generic usb-ohci driver can
7875 life with d-cache enabled.
7876
7877 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7878 Signed-off-by: Stefan Roese <sr@denx.de>
7879
7880commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
7881Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7882Date: Fri Nov 9 15:36:44 2007 +0100
7883
7884 ppc4xx: Remove redundant code from 4xx network driver
7885
7886 This patch removes some redundant code and decrements the end
7887 address of cache flush and invalidate by 1.
7888
7889 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7890 Signed-off-by: Stefan Roese <sr@denx.de>
7891
7892commit 5ca9881aad8c413ac2a82868a5e3719178254502
7893Author: Peter Pearse <peter.pearse@arm.com>
7894Date: Fri Nov 9 15:24:26 2007 +0000
7895
7896 Add apollon board support
7897 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
7898
7899commit b53313dbfc74525d85f1e7e0102f902d5c863beb
7900Author: Stefan Roese <sr@denx.de>
7901Date: Fri Nov 9 12:19:58 2007 +0100
7902
7903 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
7904
7905 Signed-off-by: Stefan Roese <sr@denx.de>
7906
7907commit c7f69c340277935a6c19a956421852da944a365f
7908Author: Stefan Roese <sr@denx.de>
7909Date: Fri Nov 9 12:18:54 2007 +0100
7910
7911 ppc4xx: Make output a little shorter on I2C bootrom detection
7912
7913 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
7914 already print a line with the information which I2C bootrom is
7915 used for bootstrap configuration. So we don't need this extra line
7916 with "I2C boot EEPROM en-/dis-abled".
7917
7918 This patch also has a little code cleanup integrated.
7919
7920 Signed-off-by: Stefan Roese <sr@denx.de>
7921
Wolfgang Denk5947f692007-11-17 02:34:38 +01007922commit 8d737a28152ec12873f8544cca1fb39a49e5e693
7923Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7924Date: Thu Nov 8 12:50:18 2007 -0600
7925
7926 ColdFire: MCF5329 - Remove reset registers from CCM
7927
7928 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7929
7930commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
7931Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7932Date: Thu Nov 8 12:31:11 2007 -0600
7933
7934 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
7935
7936 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7937
7938commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
7939Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7940Date: Thu Nov 8 12:19:01 2007 -0600
7941
7942 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
7943
7944 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7945
7946commit 225a24b5e062ad94627424508ae814f51dbe1a34
7947Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7948Date: Wed Nov 7 18:00:54 2007 -0600
7949
7950 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
7951
7952 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7953
7954commit 248c7c14835f34d5d910b45e5600050e58ca6cab
7955Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7956Date: Wed Nov 7 17:56:15 2007 -0600
7957
7958 ColdFire: MCF532x - Update do_reset() using core reset
7959
7960 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7961
7962commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
7963Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7964Date: Wed Nov 7 17:51:00 2007 -0600
7965
7966 ColdFire: Update cpu flag for 4.2-xx compiler
7967
7968 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7969
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01007970commit 070ba56115b4da63b46e974287fa4550d4023386
7971Author: York Sun <yorksun@freescale.com>
7972Date: Wed Oct 31 14:59:04 2007 -0500
7973
7974 8610: Add console frame buffer support to FSL 8610 DIU driver.
7975
7976 Add cfb console support to FSL 8610 DIU driver.
7977 Inspect board version from PIXIS to obtain correct pixel format.
7978
7979 Use #define CONFIG_VIDEO in config file to enable fb console.
7980
7981 To switch monitor, set monitor variable to
7982 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
7983 followed by "diufb init".
7984
7985 Preserve logo bitmap at the top of the fb console.
7986
7987 Signed-off-by: York Sun <yorksun@freescale.com>
7988 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7989
7990commit a877880c6949e948bd63cd6ea4e216573d2f53dd
7991Author: York Sun <yorksun@freescale.com>
7992Date: Mon Oct 29 13:58:39 2007 -0500
7993
7994 8610: Add 8610 DIU display driver
7995
7996 1280x1024 and 1024x768 @ 32 bpp are supported now.
7997 DVI, Single-link LVDS, Double-link LVDS are all supported.
7998
7999 Environmental variable "monitor" is used to specify monitor port.
8000
8001 A new command "diufb" is introduced to reinitialize monitor
8002 and display a BMP file in the memory. So far, 1-bit, 4-bit,
8003 8-bit and 24-bit BMP formats are supported.
8004
8005 diufb init
8006 - initialize the diu driver
8007 Enable the port specified in the environmental variable "monitor"
8008
8009 diufb addr
8010 - display bmp file in memory.
8011 The bmp image should be no bigger than the resolution, 1280x1024
8012 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
8013
8014 Note, this driver allocate memory but doesn't free it after use
8015 It is written on purpose -- to avoid a failure of reallocation
8016 due to memory fragement.
8017
8018 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
8019
8020 Signed-off-by: York Sun <yorksun@freescale.com>
8021 Signed-off-by: Jon loeliger <jdl@freescale.com>
8022
8023commit 52e5ddfecdda308f75782fae206b677b1810f5f9
8024Author: York Sun <yorksun@freescale.com>
8025Date: Wed Oct 31 10:43:59 2007 -0500
8026
8027 FSL: Add a freescale bitmap logo.
8028
8029 This Freescale logo is a 340 x 128 x 4bpp BMP file
8030 that can be displayed by the DIU Framebuffer driver.
8031
8032 Signed-off-by: York Sun <yorksun@freescale.com>
8033 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8034
8035commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
8036Author: York Sun <yorksun@freescale.com>
8037Date: Mon Oct 29 13:57:53 2007 -0500
8038
8039 8610: Make some extra debug environment variables conditional.
8040
8041 One may #define ENV_DEBUG to get them back again.
8042
8043 Signed-off-by: York Sun <yorksun@freescale.com>
8044
8045commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
8046Author: Jason Jin <Jason.jin@freescale.com>
8047Date: Mon Oct 29 19:26:21 2007 +0800
8048
8049 8610: Actually enable pixis_reset CONFIGs
8050
8051 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8052
8053commit f3bceaab230b4748d0afc4109b6837308f018b40
8054Author: Jason Jin <Jason.jin@freescale.com>
8055Date: Fri Oct 26 18:31:59 2007 +0800
8056
8057 Fix the BAT definition of PCI IO on 8610 board
8058
8059 The address in the BAT register is aligned with the BAT size.
8060 The original definition actually did not define BAT for PCIE2 IO.
8061 This patch fix this.
8062
8063 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8064
8065commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
8066Author: Jason Jin <Jason.jin@freescale.com>
8067Date: Mon Oct 29 19:26:21 2007 +0800
8068
8069 Unify pixis_reset altbank across board families
8070
8071 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
8072 into the separate board config files.
8073
8074 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8076
8077commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
8078Author: Jason Jin <Jason.jin@freescale.com>
8079Date: Fri Oct 26 18:32:00 2007 +0800
8080
8081 make 8610 board use pixis reset
8082
8083 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8084
8085commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
8086Author: Jon Loeliger <jdl@freescale.com>
8087Date: Thu Nov 1 12:23:29 2007 -0500
8088
8089 86xx: Fix broken variable reference when #def DEBUGing.
8090
8091 Sometimes you can't reference the DDR2 controller variables.
8092
8093 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8094
Wolfgang Denk5947f692007-11-17 02:34:38 +01008095commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
8096Author: Roy Zang <tie-fei.zang@freescale.com>
8097Date: Mon Nov 5 17:39:24 2007 +0800
8098
8099 Implement general ULi 526x Ethernet driver support in U-boot
8100
8101 This patch implements general ULi 526x Ethernet driver.
8102 Until now, it is the only native Ethernet port on
8103 MPC8610HPCD board, but it could be used on other boards
8104 with ULi 526x Ethernet port as well.
8105
8106 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8107 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8108 Acked-by: Jon Loeliger <jdl@freescale.com>
8109 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8110
8111commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
8112Author: Larry Johnson <lrj@arlinx.com>
8113Date: Thu Nov 1 08:46:50 2007 -0500
8114
8115 NET: Add Ethernet 1000BASE-X support for PPC4xx
8116
8117 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
8118 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
8119 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
8120 "mii info" command is modified to distinguish between 1000BASE-T and -X.
8121
8122 Signed-off-by: Larry Johnson <lrj@acm.org>
8123 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8124
8125commit 298035df4948b113d29ac0e694717d34b95bc5dc
8126Author: Larry Johnson <lrj@arlinx.com>
8127Date: Wed Oct 31 11:21:29 2007 -0500
8128
8129 NET: Cosmetic changes
8130
8131 Signed-off-by: Larry Johnson <lrj@acm.org>
8132 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8133
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01008134commit 654f38b3a387886996a5a75771fbfc29cb4f225e
8135Author: Stefan Roese <sr@denx.de>
8136Date: Mon Nov 5 07:43:05 2007 +0100
8137
8138 ppc4xx: Make output a little shorter on PCIe detection
8139
8140 Now not max 3 lines but 2 lines are printed per PCIe port.
8141
8142 Signed-off-by: Stefan Roese <sr@denx.de>
8143
Wolfgang Denk5947f692007-11-17 02:34:38 +01008144commit 992742a5b09d9040adbd156fb90756af66ade310
8145Author: Wolfgang Denk <wd@denx.de>
8146Date: Sat Nov 3 23:09:27 2007 +0100
8147
8148 Cleanup coding style; update CHANGELOG
8149
8150 Signed-off-by: Wolfgang Denk <wd@denx.de>
8151
Wolfgang Denk992742a2007-11-03 23:09:27 +01008152commit e881cb563e32f45832b7b6db77bdcd017adcbb41
8153Author: Bruce Adler <bruce.adler@ccpu.com>
8154Date: Fri Nov 2 13:15:42 2007 -0700
8155
8156 fix wording in README
8157
8158 Changed the wording to properly describe the shadowing
8159 of the environment from ROM to RAM
8160
8161 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
8162
8163commit ad845beef06245426c57b53dcdc01b7dc70e0d45
8164Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8165Date: Wed Oct 31 02:18:15 2007 +0900
8166
8167 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
8168
8169 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8170
8171commit ec22755799466c8a103664bb3a5e647bf9c238f4
8172Author: Vlad Lungu <vlad@comsys.ro>
8173Date: Thu Oct 25 16:08:14 2007 +0300
8174
8175 Trimmed some variables in ne2000.c
8176
8177 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
8178
8179commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
8180Author: Zhang Wei <wei.zhang@freescale.com>
8181Date: Thu Oct 25 17:51:27 2007 +0800
8182
8183 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
8184
8185 The scan code of the key 'z' is 0x1d, which should be handled.
8186
8187 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
8188 controller.
8189
8190 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8191
8192commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
8193Author: Zhang Wei <wei.zhang@freescale.com>
8194Date: Thu Oct 25 17:30:04 2007 +0800
8195
8196 Fix USB support issue for MPC8641HPCN board.
8197
8198 The configuration file has already enabled USB, but it
8199 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
8200 on MPC8641HPCN can not work because of the wrong USB
8201 register endian.
8202
8203 And add the USB command to U-Boot commands list.
8204
8205 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8206
8207commit 4e62041023dc3de9d98d977bb080235bc6d035e0
8208Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8209Date: Wed Oct 24 18:16:01 2007 +0200
8210
8211 Use config_cmd_default.h instead of config_cmd_all.h
8212
8213 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8214
8215commit 56622f87857439b1c221e9deef11a9d5bb5d4308
8216Author: Marian Balakowicz <m8@semihalf.com>
8217Date: Wed Oct 24 01:37:36 2007 +0200
8218
8219 TQM5200: Call usb_cpu_init() during board init
8220
8221 usb_cpu_init() configures GPS USB pins, clocks, etc. and
8222 is required for proper operation of kernel USB subsystem.
8223 This setup was previously done in the kernel by the fixup
8224 code which is being removed, thus low level init must be
8225 done by U-boot now.
8226
8227 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
8228
8229commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
8230Author: Guennadi Liakhovetski <lg@denx.de>
8231Date: Tue Oct 23 16:25:50 2007 +0200
8232
8233 Fix typo in nfs.c
8234
8235 An obvious typo. Originally fixed in linkstation u-boot port.
8236
8237 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8238
8239commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
8240Author: Guennadi Liakhovetski <lg@denx.de>
8241Date: Tue Oct 23 14:35:05 2007 +0200
8242
8243 Fix a typo in cpu/mpc824x/interrupts.c
8244
8245 Since December 2003 the timer_interrupt_cpu() function in
8246 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
8247 parameter. Remove it.
8248
8249 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8250
8251commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
8252Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
8253Date: Wed Oct 17 11:13:51 2007 +0200
8254
8255 add ft_cpu_setup(..) on mpc8260
8256
8257 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
8258 based on code from mpc5xxx
8259
8260 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
8261 --
8262
8263commit 6abd82e19ae93c0b4d104e50165e235915ec0875
8264Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
8265Date: Wed Oct 17 11:18:42 2007 +0200
8266
8267 changes for IDS8247 board support
8268
8269 To get the IDS8247 board working following are done:
8270 - FCC2 is deactivated
8271 - FCC1 is activated
8272 - I2C is activated
8273 - CFI driver is activated
8274 - Adapted for use with LIBFDT
8275
8276 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
8277 --
8278
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01008279commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
8280Author: Stefan Roese <sr@denx.de>
8281Date: Sat Nov 3 12:08:28 2007 +0100
8282
8283 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
8284
8285 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
8286 Again, only one image supports both targets.
8287
8288 Signed-off-by: Stefan Roese <sr@denx.de>
8289
Wolfgang Denk992742a2007-11-03 23:09:27 +01008290commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
8291Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8292Date: Wed Oct 24 15:48:37 2007 +0200
8293
8294 ATSTK1002: Remove default ethernet addresses
8295
8296 Wolfgang is right: It's not a good idea to set up default initial
8297 ethernet addresses for a board, even though they belong to the local
8298 range.
8299
8300 This will change the failure mode from "IT manager screams at you for
8301 using duplicate ethernet addresses" to a nice error message explaining
8302 that the ethernet address hasn't been set properly.
8303
8304 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8305
8306commit e5c794e491a57d829b6d8733e2ed8368a2269abf
8307Author: Justin Flammia <jflammia@savantav.com>
8308Date: Mon Oct 29 17:40:35 2007 -0400
8309
8310 DHCP Client Fix
8311
8312 This is a multi-part message in MIME format.
8313
8314 commit e6e505eae94ed721e123e177489291fc4544b7b8
8315 Author: Justin Flammia <jflammia@savantav.com>
8316 Date: Mon Oct 29 17:19:03 2007 -0400
8317
8318 Found a bug in the way the DHCP Request packet is built, where the IP address
8319 that is offered by the server is bound to prematurely. This patch is a fix of
8320 that bug where the IP address offered by the DHCP server is not used until
8321 after the DHCP ACK from the server is received.
8322
8323 Signed-off-by: Justin Flammia <jflammia@savantav.com>
8324 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8325
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01008326commit 5d96d40d3f36da33348e68f9ea993f383e11f997
8327Author: Stefan Roese <sr@denx.de>
8328Date: Wed Oct 31 20:58:34 2007 +0100
8329
8330 ppc4xx: Fix acadia_nand build problem
8331
8332 Since the cache handling functions were moved from start.S into cache.S
8333 the acadia NAND booting Makfile needs to be adapted accordingly.
8334
8335 Signed-off-by: Stefan Roese <sr@denx.de>
8336
8337commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
8338Author: Stefan Roese <sr@denx.de>
8339Date: Wed Oct 31 20:57:11 2007 +0100
8340
8341 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
8342
8343 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
8344 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
8345 boards by defining CONFIG_4xx_DCACHE in the board config file. This
8346 option will disappear, when more boards use is successfully and no
8347 more known problems exist.
8348
8349 This is tested successfully on Sequoia and Katmai. The only problem that
8350 needs to be fixed is, that USB is not working on Sequoia right now, since
8351 it will need some cache handling code too, similar to the 4xx EMAC driver.
8352
8353 Signed-off-by: Stefan Roese <sr@denx.de>
8354
8355commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
8356Author: Stefan Roese <sr@denx.de>
8357Date: Wed Oct 31 20:51:10 2007 +0100
8358
8359 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
8360
8361 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
8362 disable the cache for the CPU POST tests, since these tests consist
8363 of self modifying code. This is done via the new change_tlb() function.
8364
8365 Signed-off-by: Stefan Roese <sr@denx.de>
8366
8367commit f71b2888b4b3c870909a0341427b2a914246f81f
8368Author: Stefan Roese <sr@denx.de>
8369Date: Wed Oct 31 20:47:26 2007 +0100
8370
8371 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
8372
8373 This patch enables the 4xx EMAC POST driver to work too, when dcache is
8374 enabled.
8375
8376 Signed-off-by: Stefan Roese <sr@denx.de>
8377
8378commit a2685904061b35a17583d65fe47cdc2686a69eaa
8379Author: Stefan Roese <sr@denx.de>
8380Date: Wed Oct 31 20:45:53 2007 +0100
8381
8382 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
8383
8384 Signed-off-by: Stefan Roese <sr@denx.de>
8385
8386commit ff768cb168d8157c24a25016dbfbeb465e47f420
8387Author: Stefan Roese <sr@denx.de>
8388Date: Wed Oct 31 18:01:24 2007 +0100
8389
8390 ppc4xx: Change 4xx ethernet driver to handle cached memory too
8391
8392 This patch enables the 4xx EMAC driver to work too, when dcache is
8393 enabled.
8394
8395 Signed-off-by: Stefan Roese <sr@denx.de>
8396
8397commit 483e09a223c666269ef81d3573a6591b1046b0ef
8398Author: Stefan Roese <sr@denx.de>
8399Date: Wed Oct 31 17:59:22 2007 +0100
8400
8401 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
8402
8403 This function is used to either turn cache on or off in a specific
8404 memory area.
8405
8406 Signed-off-by: Stefan Roese <sr@denx.de>
8407
8408commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
8409Author: Stefan Roese <sr@denx.de>
8410Date: Wed Oct 31 17:57:52 2007 +0100
8411
8412 ppc4xx: Remove cache definition from 4xx board config files
8413
8414 All 4xx board config files don't need the cache definitions anymore.
8415 These are now defined in common headers.
8416
8417 Signed-off-by: Stefan Roese <sr@denx.de>
8418
8419commit 9b94ac61d2176185c30adf0793e079ec30e68687
8420Author: Stefan Roese <sr@denx.de>
8421Date: Wed Oct 31 17:55:58 2007 +0100
8422
8423 ppc4xx: Rework 4xx cache support
8424
8425 New cache handling functions added and all existing functions
8426 moved from start.S into seperate cache.S.
8427
8428 Signed-off-by: Stefan Roese <sr@denx.de>
8429
8430commit 06713773da4ac3d390c63d82641eb553224b27c2
8431Author: Stefan Roese <sr@denx.de>
8432Date: Tue Oct 23 18:03:12 2007 +0200
8433
8434 ppc4xx: Remove compiler warning from previous commit
8435
8436 Signed-off-by: Stefan Roese <sr@denx.de>
8437
8438commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
8439Author: Stefan Roese <sr@denx.de>
8440Date: Tue Oct 23 14:40:30 2007 +0200
8441
8442 ppc4xx: Remove temporary TLB entry in POST cache test
8443
8444 Signed-off-by: Stefan Roese <sr@denx.de>
8445
8446commit 1338e6a81834099ba19733b69aafd8ef5f098094
8447Author: Stefan Roese <sr@denx.de>
8448Date: Tue Oct 23 14:05:08 2007 +0200
8449
8450 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
8451
8452 I lately noticed, that newer 4xx board with GBit support sometimes don't
8453 finish link autonegotiation in 4 seconds. Changing this timeout to 5
8454 seconds seems fine here.
8455
8456 Signed-off-by: Stefan Roese <sr@denx.de>
8457
8458commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
8459Author: Stefan Roese <sr@denx.de>
8460Date: Tue Oct 23 14:03:17 2007 +0200
8461
8462 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
8463
8464 This patch changes all in32/out32 calls to use the recommended in_be32/
8465 out_be32 macros instead.
8466
8467 Signed-off-by: Stefan Roese <sr@denx.de>
8468
8469commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
8470Author: Stefan Roese <sr@denx.de>
8471Date: Thu Oct 25 12:24:59 2007 +0200
8472
8473 ppc4xx: Fix POST ethernet test for Haleakala
8474
8475 The POST ethernet test needed to be changed to dynamically determine
8476 the count of ethernet devices. This code is cloned from the 4xx
8477 ethernet driver.
8478
8479 Signed-off-by: Stefan Roese <sr@denx.de>
8480
8481commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
8482Author: Stefan Roese <sr@denx.de>
8483Date: Tue Oct 23 11:31:05 2007 +0200
8484
8485 ppc4xx: Correct UART input clock calculation and passing to fdt
8486
8487 We now use a value in the gd (global data) structure for the UART input
8488 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
8489 in get_sys_info().
8490
8491 Signed-off-by: Stefan Roese <sr@denx.de>
8492
8493commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
8494Author: Stefan Roese <sr@denx.de>
8495Date: Tue Oct 23 10:10:08 2007 +0200
8496
8497 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
8498
8499 The Haleakala is nearly identical with the Kilauea eval board. The only
8500 difference is that the 405EXr only supports one EMAC and one PCIe
8501 interface. This patch adds support for the Haleakala board by using
8502 the identical image for Kilauea and Haleakala. The distinction is done
8503 by comparing the PVR.
8504
8505 Signed-off-by: Stefan Roese <sr@denx.de>
8506
8507commit 9f798766aa85e62eb8fa8c721e148df609b78137
8508Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
8509Date: Tue Oct 23 08:29:10 2007 +0200
8510
8511 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
8512
8513 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
8514
8515 Note:
8516 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
8517 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
8518 modules are still plugged in. So it is recommended to remove the DIMM
8519 modules while using the NAND booting code with the fixed SDRAM setup!
8520
8521 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
8522 Signed-off-by: Stefan Roese <sr@denx.de>
8523
8524commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
8525Author: Stefan Roese <sr@denx.de>
8526Date: Mon Oct 22 16:24:44 2007 +0200
8527
8528 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
8529
8530 Signed-off-by: Stefan Roese <sr@denx.de>
8531
8532commit 3248f63ad89cb031491edb7016587fe6e9a238b9
8533Author: Stefan Roese <sr@denx.de>
8534Date: Mon Oct 22 16:22:40 2007 +0200
8535
8536 ppc4xx: Rework of 4xx serial driver (4)
8537
8538 Change 4xx_uart.c:
8539
8540 - Use in_8/out_8 macros instead of in8/out8
8541 - No need for UART_BASE marco anymore, now really handled via function
8542 parameter
8543 - serial_init_common() introduced
8544 - Further coding style cleanup
8545
8546 Signed-off-by: Stefan Roese <sr@denx.de>
8547
8548commit e61cb8163a66b8a135696ae232e2bead1ce0a049
8549Author: Stefan Roese <sr@denx.de>
8550Date: Mon Oct 22 15:45:49 2007 +0200
8551
8552 ppc4xx: Rework of 4xx serial driver (3)
8553
8554 Change all linker scripts to reference the changed driver name iop480_uart.o.
8555
8556 Signed-off-by: Stefan Roese <sr@denx.de>
8557
8558commit 882ae41274921f9016131806bdeb27e19606f47a
8559Author: Stefan Roese <sr@denx.de>
8560Date: Mon Oct 22 15:44:39 2007 +0200
8561
8562 ppc4xx: Rework of 4xx serial driver (2)
8563
8564 Change all linker scripts to reference the changed driver name 4xx_uart.o.
8565
8566 Note: In most cased all these explicit referencing of these object files
8567 in the linker scripts is not neccessary. Only for manually embedded
8568 environment into the U-Boot image, which is not done is most cases.
8569
8570 Signed-off-by: Stefan Roese <sr@denx.de>
8571
8572commit ad31e40bed042cb670d0036fea96435007afb838
8573Author: Stefan Roese <sr@denx.de>
8574Date: Mon Oct 22 15:09:59 2007 +0200
8575
8576 ppc4xx: Rework of 4xx serial driver (1)
8577
8578 This patch starts the rework of the PPC4xx serial driver. First we split
8579 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
8580 handling code and the other one iop480_uart.c with the UART code for the
8581 PLX-Tech IOP480 PPC (PPC403 based).
8582
8583 Signed-off-by: Stefan Roese <sr@denx.de>
8584
8585commit 764e7417ee5f6e25b1715720e7d7dd3487109385
8586Author: Stefan Roese <sr@denx.de>
8587Date: Mon Oct 22 10:30:38 2007 +0200
8588
8589 ppc4xx: Correct UART input clock calculation and passing to fdt
8590
8591 Signed-off-by: Stefan Roese <sr@denx.de>
8592
8593commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
8594Author: Stefan Roese <sr@denx.de>
8595Date: Mon Oct 22 07:34:34 2007 +0200
8596
8597 ppc4xx: Add initial AMCC Makalu 405EX support
8598
8599 Signed-off-by: Stefan Roese <sr@denx.de>
8600
8601commit fa8aea20456e6f1dba43f46bcc72024dd9499998
8602Author: Stefan Roese <sr@denx.de>
8603Date: Mon Oct 22 07:33:52 2007 +0200
8604
8605 ppc4xx: Add freqUART to CPU speed detection
8606
8607 This value is needed later for the device tree configuration of
8608 the uart clock.
8609
8610 Signed-off-by: Stefan Roese <sr@denx.de>
8611
8612commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
8613Author: Stefan Roese <sr@denx.de>
8614Date: Sun Oct 21 14:26:29 2007 +0200
8615
8616 ppc: Small Kilauea cleanup of config file
8617
8618 Signed-off-by: Stefan Roese <sr@denx.de>
8619
8620commit 758c037aeead34b49631b8da3a90b1bba14c0410
8621Author: Stefan Roese <sr@denx.de>
8622Date: Sun Oct 21 08:16:12 2007 +0200
8623
8624 rtc: Add Xicor/Intersil X1205 RTC support
8625
8626 This patch adds support for the Xicor/Intersil X1205 RTC used on the
8627 AMCC Makalu eval board. This driver is basically cloned from the Linux
8628 driver version (2.6.23).
8629
8630 This patch also introduces the Linux bcd.h header for the BCD2BIN/
8631 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
8632 should be converted to also use this header instead of implementing
8633 their own local copy of these functions/macros.
8634
8635 Signed-off-by: Stefan Roese <sr@denx.de>
8636
8637commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
8638Author: Stefan Roese <sr@denx.de>
8639Date: Sun Oct 21 08:12:41 2007 +0200
8640
8641 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
8642
8643 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
8644 PPC440_SYS_INFO structure into the common ppc4xx.h header.
8645
8646 Lot's of other macros are good candidates to be consolidated this way
8647 in the future.
8648
8649 Signed-off-by: Stefan Roese <sr@denx.de>
8650
8651commit 770c7af5800f598d22730d1f4b70f16c9b33512e
8652Author: Stefan Roese <sr@denx.de>
8653Date: Sun Oct 21 08:05:18 2007 +0200
8654
8655 ppc4xx: Fix size setup in Kilauea DDR2 init routine
8656
8657 The size was initilized wrong. Instead of 256MB, the DDR2 controller
8658 was setup to 512MB. Now the correct values is used.
8659
8660 This patch also does a little cleanup and adds a comment here.
8661
8662 Signed-off-by: Stefan Roese <sr@denx.de>
8663
8664commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
8665Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
8666Date: Thu Oct 18 17:29:04 2007 +0200
8667
8668 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
8669
8670 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
8671 number is used to access system registers.
8672
8673 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
8674 Signed-off-by: Stefan Roese <sr@denx.de>
8675
8676commit c36c68160333ac5fe41ec3db12a728b7075b3912
8677Author: Stefan Roese <sr@denx.de>
8678Date: Thu Oct 18 07:42:27 2007 +0200
8679
8680 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
8681
8682 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
8683 is the internal SRAM. Since I now ported and tested this endpoint mode
8684 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
8685 Katmai.
8686
8687 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
8688 this setup.
8689
8690 Signed-off-by: Stefan Roese <sr@denx.de>
8691
8692commit 5cb4af4791f61843432155142b6cfac901f66c10
8693Author: Stefan Roese <sr@denx.de>
8694Date: Thu Oct 18 07:39:38 2007 +0200
8695
8696 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
8697
8698 This patch adds endpoint support for the AMCC Kilauea eval board. It can
8699 be tested by connecting a reworked PCIe cable (only 1x lane singles
8700 connected) to another root-complex.
8701
8702 In this test setup, a 64MB inbound window is configured at BAR0 which maps
8703 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
8704 access the first 64MB of the SDRAM on the PPC side.
8705
8706 Signed-off-by: Stefan Roese <sr@denx.de>
8707
8708commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
8709Author: Stefan Roese <sr@denx.de>
8710Date: Sat Oct 13 16:43:23 2007 +0200
8711
8712 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
8713
8714 This patch adds support for dynamic configuration of PCIe ports for the
8715 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
8716 boards Yucca & Katmai and the 405EX board Kilauea.
8717
8718 This dynamic configuration is done via the "pcie_mode" environement
8719 variable. This variable can be set to "EP" or "RP" for endpoint or
8720 rootpoint mode. Multiple values can be joined via the ":" delimiter.
8721 Here an example:
8722
8723 pcie_mode=RP:EP:EP
8724
8725 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
8726 as endpoint.
8727
8728 Per default Yucca will be configured as:
8729 pcie_mode=RP:EP:EP
8730
8731 Per default Katmai will be configured as:
8732 pcie_mode=RP:RP:REP
8733
8734 Per default Kilauea will be configured as:
8735 pcie_mode=RP:RP
8736
8737 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
8738 Signed-off-by: Stefan Roese <sr@denx.de>
8739
8740commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
8741Author: Stefan Roese <sr@denx.de>
8742Date: Thu Oct 11 11:15:59 2007 +0200
8743
8744 ppc4xx: Enable device tree support (fdt) on Kilauea per default
8745
8746 This patch enables the fdt support on the AMCC Kilauea eval board.
8747 Additionally now EBC ranges fdt fixup is included to support NOR
8748 FLASH mapping via the Linux physmap_of driver.
8749
8750 This Kilauea port now support booting arch/ppc and arch/powerpc
8751 Linux kernels. The default environment "net_nfs" is for arch/ppc
8752 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
8753 support will be removed.
8754
8755 Signed-off-by: Stefan Roese <sr@denx.de>
8756
8757commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
8758Author: Stefan Roese <sr@denx.de>
8759Date: Thu Oct 11 11:11:45 2007 +0200
8760
8761 ppc4xx: Add additional debug info to 4xx fdt support
8762
8763 Signed-off-by: Stefan Roese <sr@denx.de>
8764
8765commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
8766Author: Stefan Roese <sr@denx.de>
8767Date: Fri Oct 5 21:28:58 2007 +0200
8768
8769 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
8770
8771 Signed-off-by: Stefan Roese <sr@denx.de>
8772
8773commit 1941cce71b1ae975602854045061e82f94ecd012
8774Author: Stefan Roese <sr@denx.de>
8775Date: Fri Oct 5 17:35:10 2007 +0200
8776
8777 ppc4xx: Fix small merge problem in 4xx_enet.c
8778
8779 Signed-off-by: Stefan Roese <sr@denx.de>
8780
8781commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
8782Author: Stefan Roese <sr@denx.de>
8783Date: Fri Oct 5 17:11:30 2007 +0200
8784
8785 ppc4xx: Add initial AMCC Kilauea 405EX support
8786
8787 Signed-off-by: Stefan Roese <sr@denx.de>
8788
8789commit dbbd125721aea6645fdb962f36bd41f59e272f9d
8790Author: Stefan Roese <sr@denx.de>
8791Date: Fri Oct 5 17:10:59 2007 +0200
8792
8793 ppc4xx: Add PPC405EX support
8794
8795 Signed-off-by: Stefan Roese <sr@denx.de>
8796
8797commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
8798Author: Stefan Roese <sr@denx.de>
8799Date: Fri Oct 5 17:09:36 2007 +0200
8800
8801 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
8802
8803 Signed-off-by: Stefan Roese <sr@denx.de>
8804
8805commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
8806Author: Stefan Roese <sr@denx.de>
8807Date: Fri Oct 5 17:07:50 2007 +0200
8808
8809 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
8810
8811 Signed-off-by: Stefan Roese <sr@denx.de>
8812
8813commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
8814Author: Stefan Roese <sr@denx.de>
8815Date: Fri Oct 5 17:04:57 2007 +0200
8816
8817 POST: Add 405EX support to 4xx UART POST test
8818
8819 Signed-off-by: Stefan Roese <sr@denx.de>
8820
8821commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
8822Author: Stefan Roese <sr@denx.de>
8823Date: Fri Oct 5 15:10:02 2007 +0200
8824
8825 DTT: Prepare DS1775 driver for use of different I2C addresses
8826
8827 Signed-off-by: Stefan Roese <sr@denx.de>
8828
8829commit 19e93b1e16d267220440d827b920fbad8abfa70f
8830Author: Stefan Roese <sr@denx.de>
8831Date: Fri Oct 5 14:23:43 2007 +0200
8832
8833 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
8834
8835 Signed-off-by: Stefan Roese <sr@denx.de>
8836
8837commit ff68f66bcb0da847845aa2fac11eba6c25938c99
8838Author: Stefan Roese <sr@denx.de>
8839Date: Fri Oct 5 09:22:33 2007 +0200
8840
8841 ppc4xx: 4xx_pcie: Disable debug output as default
8842
8843 Signed-off-by: Stefan Roese <sr@denx.de>
8844
8845commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
8846Author: Stefan Roese <sr@denx.de>
8847Date: Fri Oct 5 09:18:23 2007 +0200
8848
8849 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
8850
8851 Signed-off-by: Stefan Roese <sr@denx.de>
8852
8853commit 4dbee8a90df613eb517aadbecebd70f168913d30
8854Author: Stefan Roese <sr@denx.de>
8855Date: Fri Oct 5 07:57:20 2007 +0200
8856
8857 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
8858
8859 128MB seems to be the smallest possible value for the memory size
8860 for on PCIe port. With this change now the BAR's of the PCIe cards
8861 are accessible under U-Boot.
8862
8863 One big note: This only works for PCIe port 0 & 1. For port 2 this
8864 currently doesn't work, since the base address is now 0xc0000000
8865 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
8866 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
8867 to change the base addresses completely and this change would have
8868 too much impact right now.
8869
8870 This patch adds debug output to the 4xx pcie driver too.
8871
8872 Signed-off-by: Stefan Roese <sr@denx.de>
8873
8874commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
8875Author: Stefan Roese <sr@denx.de>
8876Date: Wed Oct 3 21:16:32 2007 +0200
8877
8878 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
8879
8880 Signed-off-by: Stefan Roese <sr@denx.de>
8881
8882commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
8883Author: Stefan Roese <sr@denx.de>
8884Date: Wed Oct 3 15:01:02 2007 +0200
8885
8886 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
8887
8888 These files were introduced with the IBM 405GP but are currently used on all
8889 4xx PPC platforms. So the name doesn't match the content anymore. This patch
8890 renames the files to 4xx_pci.c/h.
8891
8892 Signed-off-by: Stefan Roese <sr@denx.de>
8893
8894commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
8895Author: Stefan Roese <sr@denx.de>
8896Date: Wed Oct 3 14:14:58 2007 +0200
8897
8898 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
8899
8900 Signed-off-by: Stefan Roese <sr@denx.de>
8901
8902commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
8903Author: Stefan Roese <sr@denx.de>
8904Date: Wed Oct 3 10:38:09 2007 +0200
8905
8906 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
8907
8908 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
8909 the SDR registers of the PCIe ports. This makes the overall design
8910 clearer, since it removed a lot of switch statements which are not
8911 needed anymore.
8912
8913 Also, the functions ppc4xx_init_pcie_rootport() and
8914 ppc4xx_init_pcie_entport() are merged into a single function
8915 ppc4xx_init_pcie_port(), since most of the code was duplicated.
8916 This makes maintainance and porting to other 4xx platforms
8917 easier.
8918
8919 Signed-off-by: Stefan Roese <sr@denx.de>
8920
8921commit 026f71106871f31d17d0ea0db9a7547ff92934bc
8922Author: Stefan Roese <sr@denx.de>
8923Date: Wed Oct 3 07:48:09 2007 +0200
8924
8925 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
8926
8927 This patch is the first patch of a series to make the 440SPe PCIe code
8928 usable on different 4xx PPC platforms. In preperation for the new 405EX
8929 which is also equipped with PCIe interfaces.
8930
8931 (2) This patch renames the functions from 440spe_ to 4xx_ with a
8932 little additional cleanup
8933
8934 Signed-off-by: Stefan Roese <sr@denx.de>
8935
8936commit c7c6da23028f146d912514b95aefa3da7cf37699
8937Author: Stefan Roese <sr@denx.de>
8938Date: Wed Oct 3 07:34:10 2007 +0200
8939
8940 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
8941
8942 This patch is the first patch of a series to make the 440SPe PCIe code
8943 usable on different 4xx PPC platforms. In preperation for the new 405EX
8944 which is also equipped with PCIe interfaces.
8945
8946 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
8947
8948 Signed-off-by: Stefan Roese <sr@denx.de>
8949
Wolfgang Denkd3a65322008-01-10 00:55:14 +01008950commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
8951Author: Marian Balakowicz <m8@semihalf.com>
8952Date: Wed Oct 24 01:37:36 2007 +0200
8953
8954 TQM5200: Call usb_cpu_init() during board init
8955
8956 usb_cpu_init() configures GPS USB pins, clocks, etc. and
8957 is required for proper operation of kernel USB subsystem.
8958 This setup was previously done in the kernel by the fixup
8959 code which is being removed, thus low level init must be
8960 done by U-boot now.
8961
8962 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
8963 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8964
8965commit b5af773f8d92677e06f3295b45557c9d0a487c24
8966Author: Zhang Wei <wei.zhang@freescale.com>
8967Date: Thu Oct 25 17:51:27 2007 +0800
8968
8969 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
8970
8971 The scan code of the key 'z' is 0x1d, which should be handled.
8972
8973 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
8974 controller.
8975
8976 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8977 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8978
8979commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
8980Author: Rodolfo Giometti <giometti@enneenne.com>
8981Date: Mon Oct 15 11:59:17 2007 +0200
8982
8983 PXA USB OHCI: "usb stop" implementation.
8984
8985 Some USB keys need to be switched off before loading the kernel
8986 otherwise they can remain in an undefined status which prevents them
8987 to be correctly recognized by the kernel.
8988
8989 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
8990 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8991
Wolfgang Denk5947f692007-11-17 02:34:38 +01008992commit 31548249decf18a6b877a18436b6139dd483fe4a
8993Author: Justin Flammia <jflammia@savantav.com>
8994Date: Mon Oct 29 17:40:35 2007 -0400
8995
8996 DHCP Client Fix
8997
8998 This is a multi-part message in MIME format.
8999
9000 commit e6e505eae94ed721e123e177489291fc4544b7b8
9001 Author: Justin Flammia <jflammia@savantav.com>
9002 Date: Mon Oct 29 17:19:03 2007 -0400
9003
9004 Found a bug in the way the DHCP Request packet is built, where the IP address
9005 that is offered by the server is bound to prematurely. This patch is a fix of
9006 that bug where the IP address offered by the DHCP server is not used until
9007 after the DHCP ACK from the server is received.
9008
9009 Signed-off-by: Justin Flammia <jflammia@savantav.com>
9010 Signed-off-by: Ben Warren <bwarren@qstreams.com>
9011
Wolfgang Denk992742a2007-11-03 23:09:27 +01009012commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
9013Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9014Date: Thu Oct 25 17:16:22 2007 -0500
9015
9016 ColdFire 54455: Fix correct boot location for atmel and intel
9017
9018 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9019
9020commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
9021Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9022Date: Thu Oct 25 17:14:00 2007 -0500
9023
9024 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
9025
9026 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9027
9028commit c67e12e705b204cfe914e3e3e693d69a445dcabf
9029Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9030Date: Thu Oct 25 17:12:36 2007 -0500
9031
9032 ColdFire 5329: Assign correct SDRAM size and fix cache
9033
9034 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9035
9036commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
9037Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9038Date: Thu Oct 25 17:10:23 2007 -0500
9039
9040 ColdFire 5253: Assign correct SDRAM size
9041
9042 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9043
9044commit 2acefa72ee0026f862ab65597ca687428f63a973
9045Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9046Date: Thu Oct 25 17:09:17 2007 -0500
9047
9048 ColdFire 5282: Fix external flash boot and return dramsize
9049
9050 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9051
9052commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
9053Author: Bartlomiej Sieka <tur@semihalf.com>
9054Date: Thu Oct 25 17:20:01 2007 +0200
9055
9056 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
9057
9058 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9059
9060commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
9061Author: Martin Krause <martin.krause@tqs.de>
9062Date: Wed Oct 24 08:42:25 2007 +0200
9063
9064 TQM5200: fix spurious characters on second serial interface
9065
9066 With this patch PSC3 is configured as UART. This is done, because if
9067 the pins of PSC3 are not configured at all (-> all pins are GPI),
9068 due to crosstalk, spurious characters may be send over the RX232_2_TXD
9069 signal line.
9070
9071 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9072 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9073
9074commit be4a87f11e297a5cededbf7dd71c0248f3874acd
9075Author: Martin Krause <martin.krause@tqs.de>
9076Date: Wed Oct 24 08:41:27 2007 +0200
9077
9078 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
9079
9080 Some commands for the STK52xx base board try to access the SM501 grafic
9081 controller. But the TQM5200S has no grafic controller (only the TQM5200
9082 and the TQM5200B have). This patch deactivates the commands accessing
9083 the SM501 for the TQM5200S.
9084
9085 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9086 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9087
9088commit b31f64343ead9482cd439b1adbe4c34026a641b1
9089Author: Martin Krause <martin.krause@tqs.de>
9090Date: Mon Oct 22 16:45:53 2007 +0200
9091
9092 TQM5200: fix spurious characters on second serial interface
9093
9094 With this patch PSC3 is configured as UART. This is done, because if
9095 the pins of PSC3 are not configured at all (-> all pins are GPI),
9096 due to crosstalk, spurious characters may be send over the RX232_2_TXD
9097 signal line.
9098
9099 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9100
9101commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
9102Author: Martin Krause <martin.krause@tqs.de>
9103Date: Mon Oct 22 16:40:06 2007 +0200
9104
9105 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
9106
9107 Some commands for the STK52xx base board try to access the SM501 grafic
9108 controller. But the TQM5200S has no grafic controller (only the TQM5200
9109 and the TQM5200B have). This patch deactivates the commands accessing
9110 the SM501 for the TQM5200S.
9111
9112 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9113
9114commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
9115Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9116Date: Sun Oct 21 09:14:28 2007 +0200
9117
9118 Mips: Fix string functions differ prototype declaration
9119
9120 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9121
9122commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
9123Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9124Date: Fri Oct 19 17:51:40 2007 -0500
9125
9126 fsl_pci_init enable COMMAND_MEMORY if inbound window
9127
9128 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
9129 to pciauto_setup_device has the side effect of not getting
9130 COMMAND_MEMORY set.
9131
9132 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9133
9134commit e9d0d527992566ebef9826962ff1745b2f082b92
9135Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9136Date: Fri Oct 19 10:55:24 2007 +0200
9137
9138 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
9139
9140 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9141
9142commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
9143Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9144Date: Fri Oct 19 08:10:15 2007 +0200
9145
9146 fix warning: no return statement in function returning non-void
9147
9148 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9149
9150commit e78220f6e514206757acfe247297fc9a328a881f
9151Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9152Date: Fri Oct 19 06:33:45 2007 +0200
9153
9154 xsengine: Fix no partition type specified, use DOS as default
9155
9156 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9157
9158commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
9159Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9160Date: Fri Oct 19 00:24:59 2007 +0200
9161
9162 lubbock: Fix no partition type specified, use DOS as default
9163
9164 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9165
9166commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
9167Author: Wolfgang Denk <wd@denx.de>
9168Date: Tue Oct 23 16:50:03 2007 +0200
9169
9170 Coding style: keep lists sorted; update CHANGELOG
9171
9172 Signed-off-by: Wolfgang Denk <wd@denx.de>
9173
Wolfgang Denk41b4d282007-10-23 16:50:03 +02009174commit 58b74b05c621e2835ecf4e2d3243042cf4186777
9175Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9176Date: Fri Oct 19 00:09:05 2007 +0200
9177
9178 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
9179
9180 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9181
9182commit 96455bfebc9887837095c9051d216f53c61b5f10
9183Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9184Date: Fri Oct 19 00:07:39 2007 +0200
9185
9186 Fix warning differ in signedness in board/innokom/innokom.c
9187
9188 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9189
9190commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
9191Author: Marcel Ziswiler <marcel@ziswiler.com>
9192Date: Fri Oct 19 00:25:33 2007 +0200
9193
9194 fix pxa255_idp board
9195
9196 The pxa255_idp being an old unmaintained board showed several issues:
9197 1. CONFIG_INIT_CRITICAL was still defined.
9198 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
9199 3. Symbol flash_addr was undeclared.
9200 4. The boards lowlevel_init function was still called memsetup.
9201 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
9202 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
9203 'target CPU does not support interworking' warnings on recent compilers.
9204 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
9205 indexes rather than the register definitions from the pxa-regs header
9206 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
9207 avoid any ambiguities.
9208 8. There were several redefinition warnings concerning ICMR, OSMR3,
9209 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
9210 9. The board configuration file was rather outdated.
9211 10. The part header file defined the vendor, product and revision arrays
9212 as unsigned chars instead of just chars in the block_dev_desc_t
9213 structure.
9214
9215 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
9216
9217commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
9218Author: Rune Torgersen <runet@innovsys.com>
9219Date: Wed Oct 17 11:56:31 2007 -0500
9220
9221 Make MPC8266ADS command selection more robust
9222
9223 Fix MPC8266 command line definition so it won't break when new commands
9224 are added to u-boot.
9225 Signed-off-by Rune Torgersen <runet@innovsys.com>
9226
Wolfgang Denk992742a2007-11-03 23:09:27 +01009227commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
9228Author: Bartlomiej Sieka <tur@semihalf.com>
9229Date: Tue Oct 23 13:14:10 2007 +0200
9230
9231 Motion-PRO: Update configuration to accomodate next generation board.
9232
9233 New board has faster oscillator and a different Flash chip. This affects:
9234 - CFG_MPC5XXX_CLKIN
9235 - SDRAM timings
9236 - Flash CS configuration (timings)
9237 - Flash sector size, and thus MTD partition layout
9238 - malloc() arena size (due to bigger Flash sectors)
9239 - smaller memory test range (due to bigger malloc() arena)
9240
9241 This patch also enables more extensive memory testing via "mtest".
9242
9243 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9244
9245commit eff501904df2bf1724a750062628ba2c51dbb1f8
9246Author: Bartlomiej Sieka <tur@semihalf.com>
9247Date: Tue Oct 23 11:36:07 2007 +0200
9248
9249 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
9250
9251 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
9252 register must be written a value of 0x00000004 as the first step of the
9253 SDRAM contorller configuration.
9254
9255 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9256
9257commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
9258Author: Peter Pearse <peter.pearse@arm.com>
9259Date: Tue Oct 23 10:22:16 2007 +0100
9260
9261 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
9262
Wolfgang Denk5947f692007-11-17 02:34:38 +01009263commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
9264Author: Stefan Roese <sr@denx.de>
9265Date: Tue Oct 23 10:17:42 2007 +0200
9266
9267 ppc4xx: lwmon5: Some further GPIO config changes
9268
9269 Signed-off-by: Stefan Roese <sr@denx.de>
9270
Wolfgang Denk992742a2007-11-03 23:09:27 +01009271commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
9272Author: Vlad Lungu <vlad@comsys.ro>
9273Date: Sun Oct 21 22:10:10 2007 +0900
9274
9275 [MIPS] Fix UNCACHED_SDRAM
9276
9277 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
9278
9279 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
9280 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9281
9282commit 00101dd7a32d12f698150123e47e4b3420279f86
9283Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9284Date: Sun Oct 21 21:30:42 2007 +0900
9285
9286 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
9287
9288 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9289
9290commit eb700636db017d310edaeb559b13d82588560674
9291Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9292Date: Sun Oct 21 10:55:37 2007 +0900
9293
9294 [MIPS] u-boot.lds: Define _gp in a standard manner
9295
9296 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9297
9298commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
9299Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9300Date: Sun Oct 21 10:55:36 2007 +0900
9301
9302 [MIPS] Fix $gp usage
9303
9304 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
9305 As a general principle, we should use _gp for $gp.
9306
9307 Thanks to linker script's help we fortunately have _gp which equals to
9308 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
9309 be able to access to GOT entires, global variables and procedure entry
9310 points. The right thing to do is to use _gp.
9311
9312 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
9313 which holds the offset from _gp. When updating GOT entries, we use this
9314 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
9315
9316 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
9317 I made some change to leave over num_got_entries.
9318
9319 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9320 Cc: Vlad Lungu <vlad@comsys.ro>
9321
9322commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
9323Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9324Date: Sun Oct 21 10:55:36 2007 +0900
9325
9326 [MIPS] u-boot.lds: Fix __got_start and __got_end
9327
9328 Ensure that __got_start points to top of the `.got', and __got_end points
9329 to bottom as well, so that we never fail to count num_got_entries.
9330
9331 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9332
9333commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
9334Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9335Date: Sun Oct 21 10:55:36 2007 +0900
9336
9337 [MIPS] u-boot.lds: Remove duplicated .sdata section
9338
9339 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9340
Wolfgang Denk41b4d282007-10-23 16:50:03 +02009341commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
9342Author: Wolfgang Denk <wd@denx.de>
9343Date: Sun Oct 21 01:01:17 2007 +0200
9344
9345 Minor coding style cleanup; update CHANGELOG
9346
9347 Signed-off-by: Wolfgang Denk <wd@denx.de>
9348
Wolfgang Denk05bf4912007-10-21 01:01:17 +02009349commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
9350Author: Vlad Lungu <vlad@comsys.ro>
9351Date: Thu Oct 4 20:47:10 2007 +0300
9352
9353 Fix NE2000 driver:
9354
9355 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
9356 to do anything in eth_stop() if eth_init() was not called.
9357 Simplified RX path in order to avoid timeouts on really really
9358 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
9359 clever enough to cope with 1 packet per eth_rx().
9360
9361 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
9362
Wolfgang Denk992742a2007-11-03 23:09:27 +01009363commit df90968b48fb34fa9072fab150db2ac89678f537
9364Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
9365Date: Mon Sep 24 13:32:13 2007 -0400
9366
9367 Setting MSR[DE] in do_reset
9368
9369 Hello,
9370 This patch ensures the soft reset of the board for the 85xx boards
9371 by setting the MSR[DE] in the do_reset function.
9372
9373 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
9374
9375commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
9376Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
9377Date: Mon Sep 24 13:36:01 2007 -0400
9378
9379 MSR overwrite fix
9380
9381 Hello,
9382 This patch fixes the MSR overwrite in the start.S when moving out of
9383 the last 4K page.
9384
9385 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
9386
9387commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
9388Author: Dan Wilson <dwilson@fulcrummicro.com>
9389Date: Fri Oct 19 11:33:48 2007 -0500
9390
9391 tsec driver should clear RHALT on startup
9392
9393 This was causing problems for some people.
9394
9395 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
9396 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
9397 Signed-off-by: Andy Fleming <afleming@freescale.com>
9398
9399commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
9400Author: Kumar Gala <galak@kernel.crashing.org>
9401Date: Thu Oct 11 00:29:18 2007 -0500
9402
9403 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
9404
9405 On the MPC85xx CDS we have two issues:
9406
9407 1. The device tree fixup code did not check to see if the property we are
9408 trying to update is actually found. Its possible that it would update
9409 random memory starting at 0.
9410
9411 2. Newer Linux kernel's have moved the location of the PCI nodes to be
9412 sibilings of the soc node and not children. The explicit PATH to the PCI
9413 node would not be found for these device trees. Add the ability to handle
9414 both paths. In the future we shouldn't handle such fixups by explicit path.
9415
9416 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9417
9418commit a3063eec775719b7e91023bbec3f64b3118791df
9419Author: Kumar Gala <galak@kernel.crashing.org>
9420Date: Thu Oct 11 00:18:48 2007 -0500
9421
9422 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
9423
9424 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
9425 console. Make it so we match that config what we tell Linux as the early
9426 STDOUT console.
9427
9428 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9429
9430commit e1ce3cb617bb06f91f82f98915391175addf3e82
9431Author: Kumar Gala <galak@kernel.crashing.org>
9432Date: Tue Oct 2 11:12:27 2007 -0500
9433
9434 Remove magic numbers from cache related operations for mpc85xx
9435
9436 The mpc85xx start code uses some magic numbers that we actually
9437 have #defines for in <config.h> so use those instead.
9438
9439 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9440
Wolfgang Denk05bf4912007-10-21 01:01:17 +02009441commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
9442Author: Detlev Zundel <dzu@denx.de>
9443Date: Fri Oct 19 16:47:26 2007 +0200
9444
9445 Fix two typos.
9446
9447 Signed-off-by: Detlev Zundel <dzu@denx.de>
9448
9449commit 281df457c1aa50d2752165d0c5c3282d4027b974
9450Author: Tony Li <tony.li@freescale.com>
9451Date: Thu Oct 18 17:47:19 2007 +0800
9452
9453 mpc83xx: Add configure entry for MPC83xx ATM support
9454
9455 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
9456 Makfile and MAKEALL
9457
9458 Signed-off-by: Tony Li <tony.li@freescale.com>
9459 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9460
9461commit d2646554f529a9577515eceb0ec5eceee18244ba
9462Author: Tony Li <tony.li@freescale.com>
9463Date: Thu Oct 18 17:44:38 2007 +0800
9464
9465 mpc83xx: pq-mds-pib.c typo error
9466
9467 Correct to val8 from val.
9468
9469 Signed-off-by: Tony Li <tony.li@freescale.com>
9470 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9471
9472commit 3e11ae80fec1ee12194940955431186abf6009c2
9473Author: Stefan Roese <sr@denx.de>
9474Date: Wed Oct 17 15:40:19 2007 +0200
9475
9476 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
9477
9478 Signed-off-by: Stefan Roese <sr@denx.de>
9479
Wolfgang Denk435dc8f2008-01-09 11:36:21 +01009480commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
9481Author: Jon Loeliger <jdl@freescale.com>
9482Date: Tue Oct 16 15:27:43 2007 -0500
9483
9484 Initial mpc8610hpcd Makefile files.
9485
9486 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9487 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
9488 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9489 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9490
9491commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
9492Author: Jon Loeliger <jdl@freescale.com>
9493Date: Tue Oct 16 15:26:51 2007 -0500
9494
9495 Initial mpc8610hpcd cpu/, README and include/ files.
9496
9497 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9498 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
9499 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9500 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9501
9502commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
9503Author: Jon Loeliger <jdl@freescale.com>
9504Date: Tue Oct 16 13:54:01 2007 -0500
9505
9506 Initial mpc8610hpcd board files.
9507
9508 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9509 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
9510 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9511 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9512
Wolfgang Denk05bf4912007-10-21 01:01:17 +02009513commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
9514Author: runet@innovsys.com <runet@innovsys.com>
9515Date: Tue Oct 16 14:50:40 2007 -0500
9516
9517 Make MPC8266ADS board compile again.
9518
9519 Signed-off-by: Runet Torgersen <runet@innovsys.com>
9520
9521commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
9522Author: Jon Loeliger <jdl@freescale.com>
9523Date: Mon Aug 27 12:41:03 2007 -0500
9524
9525 86xx: Allow for fewer DDR slots per memory controller.
9526
9527 As a direct correlation exists between DDR DIMM slots
9528 and SPD EEPROM addresses used to configure them, use
9529 the individually defined SPD_EEPROM_ADDRESS* values to
9530 determine if a DDR DIMM slot should have its SPD
9531 configuration read or not.
9532
9533 Effectively, this now allows for 1 or 2 DIMM slots
9534 per memory controller.
9535
9536 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9537
9538commit 4d4a945e189a2f384c66432316da2788a0ac1607
9539Author: Rodolfo Giometti <giometti@enneenne.com>
9540Date: Mon Oct 15 11:59:17 2007 +0200
9541
9542 PXA USB OHCI: "usb stop" implementation.
9543
9544 Some USB keys need to be switched off before loading the kernel
9545 otherwise they can remain in an undefined status which prevents them
9546 to be correctly recognized by the kernel.
9547
9548 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
9549
9550commit e2e93442e558cf1500e92861f99713b2f045ea22
9551Author: Stefan Roese <sr@denx.de>
9552Date: Mon Oct 15 11:39:00 2007 +0200
9553
9554 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
9555
9556 The I2C bootstrap values that can be setup via the "bootstrap" command,
9557 were setup incorrect regarding the generation of the internal sync PCI
9558 clock. The values for PLB clock == 133MHz were slighly incorrect and the
9559 values for PLB clock == 166MHz were totally incorrect. This could
9560 lead to a hangup upon booting while PCI configuration scan.
9561
9562 This patch fixes this issue and configures valid PCI divisor values
9563 for the sync PCI clock, with respect to the provided external async
9564 PCI frequency.
9565
9566 Here the values of the formula in the chapter 14.2 "PCI clocking"
9567 from the 440EPx users manual:
9568
9569 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
9570
9571 33MHz async PCI frequency:
9572 PLB = 133:
9573 => 32 <= 44.3 <= 65 (div = 3)
9574
9575 PLB = 166:
9576 => 32 <= 55.3 <= 65 (div = 3)
9577
9578 66MHz async PCI frequency:
9579 PLB = 133:
9580 => 65 <= 66.5 <= 132 (div = 2)
9581
9582 PLB = 166:
9583 => 65 <= 83 <= 132 (div = 2)
9584
9585 Signed-off-by: Stefan Roese <sr@denx.de>
9586
9587commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
9588Author: Stefan Roese <sr@denx.de>
9589Date: Mon Oct 15 11:29:33 2007 +0200
9590
9591 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
9592
9593 The BCSR status bit for the 66MHz PCI operation was correctly
9594 addressed (MSB/LSB problem). Now the correct currently setup
9595 PCI frequency is displayed upon bootup.
9596
9597 This patch also fixes this problem on Rainier & Yellowstone, since these
9598 boards use the same souce code as Sequoia & Yosemite do.
9599
9600 Signed-off-by: Stefan Roese <sr@denx.de>
9601
9602commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
9603Author: Martin Krause <martin.krause@tqs.de>
9604Date: Wed Sep 26 17:55:56 2007 +0200
9605
9606 TQM860M: adjust for doubled flash sector size.
9607
9608 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
9609 doubled sector size.
9610
9611 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9612
9613commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
9614Author: Jens Gehrlein <jens.gehrlein@tqs.de>
9615Date: Wed Sep 26 17:55:54 2007 +0200
9616
9617 TQM8xx: Fix CAN timing.
9618
9619 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9620
9621commit d43e489baf02afae49077791fb22332d240d8656
9622Author: Martin Krause <martin.krause@tqs.de>
9623Date: Thu Sep 27 14:54:36 2007 +0200
9624
9625 TQM866M: fix SDRAM refresh
9626
9627 At 133 MHz the current SDRAM refresh rate is too fast
9628 (measured 4 * 1.17 us).
9629 CFG_MAMR_PTA changes from 39 to 97. This result
9630 in a refresh rate of 4 * 7.8 us at the default clock
9631 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
9632 This is a compromise until a new method is found to
9633 adjust the refresh rate.
9634
9635 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9636
9637commit 9ef57bbee1c67cc01da2026c242c4692db32be36
9638Author: Martin Krause <martin.krause@tqs.de>
9639Date: Wed Sep 26 17:55:55 2007 +0200
9640
9641 TQM866M: adjust for doubled flash sector size.
9642
9643 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
9644 doubled sector size.
9645
9646 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9647
9648commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
9649Author: Michal Simek <monstr@monstr.eu>
9650Date: Sun Oct 14 16:12:29 2007 +0200
9651
9652 [FIX] XUPV2P change command handling
9653 and remove code violation
9654
9655commit 636400198228d96983c06657b17f760f5989958e
9656Author: Wolfgang Denk <wd@denx.de>
9657Date: Sun Oct 14 00:13:19 2007 +0200
9658
9659 Prepare for 1.3.0-rc3 release
9660
9661 Signed-off-by: Wolfgang Denk <wd@denx.de>
9662
Wolfgang Denk63640012007-10-14 00:13:19 +02009663commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
9664Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9665Date: Sat Sep 29 13:41:37 2007 +0200
9666
9667 Fix warning differ in signedness in cpu/pxa/mmc.c
9668
9669 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9670
9671commit fc19e36f741e8bc727c0a330170b3b5db90399ef
9672Author: Wolfgang Denk <wd@denx.de>
9673Date: Sat Oct 13 23:51:14 2007 +0200
9674
9675 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
9676
9677 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9678 Signed-off-by: Wolfgang Denk <wd@denx.de>
9679
9680commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
9681Author: Wolfgang Denk <wd@denx.de>
9682Date: Sat Oct 13 21:15:39 2007 +0200
9683
9684 Coding Style cleanup.
9685
9686 Signed-off-by: Wolfgang Denk <wd@denx.de>
9687
Wolfgang Denkde74b9e2007-10-13 21:15:39 +02009688commit e1893815b0999410d7a327589611c7b38e95299e
9689Author: Wolfgang Denk <wd@denx.de>
9690Date: Fri Oct 12 15:49:39 2007 +0200
9691
9692 GP3 SSA: enable RTC
9693
9694 Signed-off-by: Wolfgang Denk <wd@denx.de>
9695
9696commit 8002012041f1ff9f997a5727abe5015f70cd2e46
9697Author: Grzegorz Bernacki <gjb@semihalf.com>
9698Date: Tue Oct 9 13:58:24 2007 +0200
9699
9700 [ads5121] EEPROM support added.
9701
9702 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9703
Wolfgang Denk63640012007-10-14 00:13:19 +02009704commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
9705Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
9706Date: Sat Oct 6 18:55:35 2007 +0200
9707
9708 AVR32: Initialize bi_flash* in board_init_r
9709
9710 The ATSTK1000-specific flash driver intializes bi_flashstart,
9711 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
9712 driver, don't.
9713
9714 Initialize these in board_init_r instead so that things will still be
9715 set up correctly when we switch to the CFI driver.
9716
9717 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9718
Wolfgang Denkde74b9e2007-10-13 21:15:39 +02009719commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
9720Author: Marian Balakowicz <m8@semihalf.com>
9721Date: Fri Oct 5 10:40:54 2007 +0200
9722
9723 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
9724
9725 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9726
9727commit 92869195ef8210758d2176230c0a36897afd50ed
9728Author: Bartlomiej Sieka <tur@semihalf.com>
9729Date: Fri Oct 5 09:46:06 2007 +0200
9730
9731 CM5200: Fix missing null-termination in hostname manipulation code
9732
9733 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9734
Wolfgang Denk63640012007-10-14 00:13:19 +02009735commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
9736Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
9737Date: Tue Oct 2 19:09:01 2007 +0200
9738
9739 Fix memtest breakage
9740
9741 CFG_MEMTEST_START uses weird magic involving gd, which fails to
9742 compile. Use hardcoded values instead (we actually know how much RAM
9743 we have on board.)
9744
9745 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9746
Wolfgang Denkde74b9e2007-10-13 21:15:39 +02009747commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
9748Author: Stefan Roese <sr@denx.de>
9749Date: Tue Oct 2 11:44:46 2007 +0200
9750
9751 ppc4xx: Coding style cleanup
9752
9753 Signed-off-by: Stefan Roese <sr@denx.de>
9754
9755commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
9756Author: Stefan Roese <sr@denx.de>
9757Date: Tue Oct 2 11:44:19 2007 +0200
9758
9759 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
9760
9761 Signed-off-by: Stefan Roese <sr@denx.de>
9762
9763commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
9764Author: Grzegorz Bernacki <gjb@semihalf.com>
9765Date: Mon Oct 1 09:51:50 2007 +0200
9766
9767 Program EPLD to force full duplex mode for PHY.
9768
9769 EPLD forces modes of PHY operation. By default full duplex is turned off.
9770 This fix turns it on.
9771
9772 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9773
Wolfgang Denk05bf4912007-10-21 01:01:17 +02009774commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
9775Author: Timo Ketola <timo.ketola@exertus.fi>
9776Date: Mon Sep 24 14:50:32 2007 +0300
9777
9778 Bugfix: Use only one PTD for one endpoint
9779
9780 Original isp116x-hcd code prepared multiple PTDs for longer than 16
9781 byte transfers for one endpoint. That is unnecessary because the
9782 ISP116x is able to split long data from one PTD into multiple
9783 transactions based on the buffer size of the endpoint. It also caused
9784 serious problems if the endpoint NAKed some of the transactions. In
9785 that case ISP116x wouldn't notice that the other PTDs were for the same
9786 endpoint and would try the other PTDs possibly out of order. That would
9787 break the whole transfer.
9788
9789 This patch makes isp116x_submit_job to use one PTD for one transfer.
9790
9791 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
9792 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9793
Wolfgang Denkde74b9e2007-10-13 21:15:39 +02009794commit 86ec86c04326c3913178a7679aa910de071da75d
9795Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9796Date: Thu Sep 27 23:27:47 2007 +0200
9797
9798 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
9799
9800 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9801
9802commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
9803Author: Stefan Roese <sr@denx.de>
9804Date: Tue Sep 11 14:12:55 2007 +0200
9805
9806 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
9807
9808 Signed-off-by: Stefan Roese <sr@denx.de>
9809
Wolfgang Denk992742a2007-11-03 23:09:27 +01009810commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
9811Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9812Date: Wed Sep 26 16:35:54 2007 -0500
9813
9814 85xx io out functions need sync after write.
9815
9816 This fixes the mc146818 rtc_read/write functions for 85xx.
9817
9818 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9819
Wolfgang Denkde74b9e2007-10-13 21:15:39 +02009820commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
9821Author: Grant Likely <grant.likely@secretlab.ca>
9822Date: Tue Sep 25 15:48:05 2007 -0600
9823
9824 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
9825
9826 CFG_FPGA_XILINX is a bit value used to test against the value in
9827 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
9828 think that is the intention in this code.
9829
9830 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9831
Wolfgang Denk63640012007-10-14 00:13:19 +02009832commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
9833Author: Michal Simek <monstr@monstr.eu>
9834Date: Mon Sep 24 00:41:30 2007 +0200
9835
9836 [FIX] change command handling and removing code violation
9837
9838commit f240356507038e5ce55e8a24cb2607e9eae6d10c
9839Author: Michal Simek <monstr@monstr.eu>
9840Date: Mon Sep 24 00:36:06 2007 +0200
9841
9842 [FIX] change sets of commands
9843 because changing of command handling brings
9844 compilation problems
9845
9846commit cb1bc63b75a232571eb69aa2c8aa919321655845
9847Author: Michal Simek <monstr@monstr.eu>
9848Date: Mon Sep 24 00:30:42 2007 +0200
9849
9850 [FIX] Email reparation & Copyright
9851 Both codes are written by myself without any
9852 support from CTU
9853
9854commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
9855Author: Michal Simek <monstr@monstr.eu>
9856Date: Mon Sep 24 00:25:11 2007 +0200
9857
9858 [PATCH] Change macro name for UartLite
9859 because PowerPC 405 can use UartLite as console
9860
9861commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
9862Author: Michal Simek <monstr@monstr.eu>
9863Date: Mon Sep 24 00:21:19 2007 +0200
9864
9865 [PATCH] Add support for design without interrupt controller
9866 Polling timer
9867
9868commit 0731933ec8ec45d02ba89b52df673d526873cdde
9869Author: Michal Simek <monstr@monstr.eu>
9870Date: Mon Sep 24 00:19:48 2007 +0200
9871
9872 [FIX] resolve problem with cpu without barrel shifter
9873
9874commit db14d77995ce515b728b178b63f82babe60e3d56
9875Author: Michal Simek <monstr@monstr.eu>
9876Date: Mon Sep 24 00:18:46 2007 +0200
9877
9878 [FIX] repair email address
9879
9880commit 481d4328618804add1f818a6c96296121cd0528e
9881Author: Michal Simek <monstr@monstr.eu>
9882Date: Mon Sep 24 00:17:42 2007 +0200
9883
9884 [FIX] repair MFSL commands
9885
9886commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
9887Author: Michal Simek <monstr@monstr.eu>
9888Date: Mon Sep 24 00:08:37 2007 +0200
9889
9890 synchronizition with mainline
9891
Wolfgang Denk61fb15c52007-12-27 01:52:50 +01009892commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
9893Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9894Date: Sun Sep 23 02:42:38 2007 +0900
9895
9896 sh: Add support command of ide with sh
9897
9898 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9899
9900commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
9901Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9902Date: Sun Sep 23 02:38:42 2007 +0900
9903
9904 sh: Update Makefile
9905
9906 Add support MS7722SE01 to Makefile.
9907
9908 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9909
9910commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
9911Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9912Date: Sun Sep 23 02:31:13 2007 +0900
9913
9914 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
9915
9916 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9917
9918commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
9919Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9920Date: Sun Sep 23 02:19:24 2007 +0900
9921
9922 sh: Update MS7750SE01 platform
9923
9924 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9925
9926commit 516ad760db3553766267ada01b7d5d727faa4bbd
9927Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9928Date: Sun Sep 23 02:17:08 2007 +0900
9929
9930 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
9931
9932 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9933
9934commit b02bad128669e567fce87d8df823b06a0144b8db
9935Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9936Date: Sun Sep 23 02:12:30 2007 +0900
9937
9938 sh: Update core code of SuperH.
9939
9940 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9941
Wolfgang Denkde74b9e2007-10-13 21:15:39 +02009942commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
9943Author: Wolfgang Denk <wd@denx.de>
9944Date: Thu Sep 20 00:04:14 2007 +0200
9945
9946 v1.3.0-rc2
9947
9948 Signed-off-by: Wolfgang Denk <wd@denx.de>
9949
Wolfgang Denk66dcad32007-09-20 00:04:14 +02009950commit 135e19bc2773ebca487e9a8371f67e1ba202313a
9951Author: Wolfgang Denk <wd@denx.de>
9952Date: Tue Sep 18 21:36:35 2007 +0200
9953
9954 Avoid compiler warning.
9955
9956 Signed-off-by: Wolfgang Denk <wd@denx.de>
9957
9958commit 8a783a65851bc7421ab69f442261215e21b8891a
9959Author: Grant Likely <grant.likely@secretlab.ca>
9960Date: Tue Sep 18 12:24:57 2007 -0600
9961
9962 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
9963
9964 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
9965 nulls in a string differently. For example, the following statement:
9966 echo "this is a string\0" > afile
9967 Will produce the following with /bin/bash:
9968 "this is a string\0"
9969 But with /bin/dash, will produce:
9970 "this is a string
9971
9972 Bug fixed by moving the embedded null out of the makefile and into the
9973 config header. Also renamed the macro to avoid usage colision with the same
9974 macro used by other board ports.
9975
9976 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9977
9978commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
9979Author: Wolfgang Denk <wd@denx.de>
9980Date: Tue Sep 18 17:40:27 2007 +0200
9981
9982 MCC200: fix build warning
9983
9984 The MCC200 board config file includes version.h for some customer-
9985 specific setting, which causes warnings with "make depend"; build
9986 version.h before depend.
9987
9988 Signed-off-by: Wolfgang Denk <wd@denx.de>
9989
Wolfgang Denkde74b9e2007-10-13 21:15:39 +02009990commit bd86220f58b99d6896198c385fda132f0c980915
9991Author: Peter Pearse <peter.pearse@arm.com>
9992Date: Tue Sep 18 13:07:54 2007 +0100
9993
9994 Move coloured led API to status_led.h
9995 Improve indentation in drivers/at45.c
9996
Wolfgang Denk63640012007-10-14 00:13:19 +02009997commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
9998Author: Eirik Aanonsen <eaa@wprmedical.com>
9999Date: Tue Sep 18 08:47:20 2007 +0200
10000
10001 Update atstk1002 bootargs.
10002
10003 Updates to atstk1002 U-Boot header file:
10004 - Changed bootargs:
10005 * Set the bootargs for at1002 to point to the SD-card partition instead
10006 * ... of the boot flash.
10007 * Removing the rootfstype since that argument are not needed.
10008
10009 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
10010 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10011
10012commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
10013Author: Eirik Aanonsen <eaa@wprmedical.com>
10014Date: Wed Sep 12 13:32:37 2007 +0200
10015
10016 Add some comments to clocks in atstk1002.h
10017
10018 This patch applies some clarifying comments to how the different
10019 clocks are setup according to atstk1002.h Some of the previous
10020 comments where stating wrongful information.
10021
10022 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10023
Wolfgang Denkde74b9e2007-10-13 21:15:39 +020010024commit 97213f32416ead885deafea86774e912ffd60ad0
10025Author: David Saada <David.Saada@ecitele.com>
10026Date: Mon Sep 17 17:04:47 2007 +0200
10027
10028 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
10029
10030 Signed-off-by: David Saada <david.saada@ecitele.com>
10031
Wolfgang Denk63640012007-10-14 00:13:19 +020010032commit 30363e98fa470fbecea5e8bc0f1443352754f303
10033Author: Stefan Roese <sr@denx.de>
10034Date: Mon Sep 17 08:20:47 2007 +0200
10035
10036 Small whitespace cleanup of OneNAND patch
10037
10038 Signed-off-by: Stefan Roese <sr@denx.de>
10039
10040commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
10041Author: Kyungmin Park <kmpark@infradead.org>
10042Date: Mon Sep 10 17:15:14 2007 +0900
10043
10044 OneNAND support (take #2)
10045
10046 [PATCH 3/3] OneNAND support (take #2)
10047
10048 OneNAND support at U-Boot
10049
10050 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10051
10052commit 17aa2800457df0c06b41516f46f126712c196219
10053Author: Kyungmin Park <kmpark@infradead.org>
10054Date: Mon Sep 10 17:14:34 2007 +0900
10055
10056 OneNAND support (take #2)
10057
10058 [PATCH 2/3] OneNAND support (take #2)
10059
10060 OneNAND support at U-Boot
10061
10062 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10063
10064commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
10065Author: Kyungmin Park <kmpark@infradead.org>
10066Date: Mon Sep 10 17:13:49 2007 +0900
10067
10068 OneNAND support (take #2)
10069
10070 [PATCH 1/3] OneNAND support (take #2)
10071
10072 OneNAND support at U-Boot
10073
10074 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10075
Wolfgang Denk05bf4912007-10-21 01:01:17 +020010076commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
10077Author: Michal Simek <monstr@monstr.eu>
10078Date: Sun Sep 16 20:51:57 2007 +0200
10079
10080 [FIX] remove files form repository
10081
Wolfgang Denk66dcad32007-09-20 00:04:14 +020010082commit 67c31036acaaaa992fc346cc89db0909a7e733c4
10083Author: Wolfgang Denk <wd@denx.de>
10084Date: Sun Sep 16 17:10:04 2007 +0200
10085
10086 TQM8xx[LM]: Fix broken environment alignment.
10087
10088 With recent toolchains, the environment sectors were no longer aligned to
10089 sector boundaries. The reason was a combination of two bugs:
10090
10091 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
10092 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
10093 this gets defined, is not included here (and cannot be included
10094 without causing lots of problems).
10095
10096 Added a new #define CFG_USE_PPCENV for all boards which really
10097 want to put the environment is a ".ppcenv" section.
10098
10099 2) The linker scripts just include environment.o, silently assuming
10100 that the objects in that file are really in the order in which
10101 they are coded in the C file, i. e. "environment" first, then
10102 "redundand_environment", and "env_size" last. However, current
10103 toolchains (GCC-4.x) reorder the objects, causing the environment
10104 data not to start on a flash sector boundary:
10105
10106 Instead of: we got:
10107
10108 40008000 T environment 40008000 T env_size
10109 4000c000 T redundand_environment 40008004 T redundand_environment
10110 40010000 T env_size 4000c004 T environment
10111
10112 Note: this patch fixes just the first part, and cures the alignment
10113 problem by making sure that "env_size" gets placed correctly. However,
10114 we still have a potential issue because primary and redundant
10115 environment sectors are actually swapped, i. e. we have now:
10116
10117 40008000 T redundand_environment
10118 4000c000 T environment
10119 40010000 T env_size
10120
10121 This shall be fixed in the next version.
10122
10123 Signed-off-by: Wolfgang Denk <wd@denx.de>
10124
10125commit eb6da8050797c204c9d010548424186c7ce32fc1
10126Author: Wolfgang Denk <wd@denx.de>
10127Date: Sun Sep 16 02:39:35 2007 +0200
10128
10129 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
10130
10131 Signed-off-by: Wolfgang Denk <wd@denx.de>
10132
10133commit cd2d1602c54cc6957bdef3872272a4b264893960
10134Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
10135Date: Mon Sep 10 14:54:56 2007 -0400
10136
10137 Typo fix in tsec.c
10138
10139 Fixup for the break statement in wrong place.
10140
10141 [Patch by urwithsughosh@gmail.com]
10142 Acked-by: Andy Fleming <afleming@freescale.com>
10143 Signed-off-by: Wolfgang Denk <wd@denx.de>
10144
10145commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
10146Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10147Date: Tue Sep 11 17:04:00 2007 +0200
10148
10149 Fix do_div() usage in nand process output
10150
10151 Fix usage of do_div() in nand erase|read|write process output.
10152
10153 The last patch to nand_util.c introduced do_div() instead of libgcc's
10154 implementation. But do_div() returns the quotient in its first
10155 macro parameter and not as result.
10156
10157 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10158
10159commit c750d2e6692a000a82f29de7bf24e3dc21239161
10160Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10161Date: Wed Sep 12 12:36:53 2007 +0200
10162
10163 NAND: Add CFG_NAND_QUIET option
10164
10165 This config option sets the default for the progress information
10166 output behavior that can also be configured through the 'quiet'
10167 environment variable.
10168
10169 The legacy NAND code does not print the current progress info
10170 on the console. So this option is for backward compatibility for
10171 units that are in the field and where setting the quiet variable
10172 is not an option. With CFG_NAND_QUIET set to '1' the console
10173 progress info is turned off. This can still be overwritten
10174 through the environment variable.
10175
10176 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10177
10178commit dcb88630290d2bcd803386dd4c2be73142994c4f
10179Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
10180Date: Thu Sep 13 16:06:05 2007 -0700
10181
10182 ColdFire: fix build error becasue of bad type of mii_init()
10183
10184 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10185
10186commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
10187Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
10188Date: Thu Sep 13 16:04:05 2007 -0700
10189
10190 ColdFire: Fix build error caused by pixis.c
10191
10192 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
10193
10194 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10195
10196commit e21659e30660a1377c42af135a6114efe39801d9
10197Author: Sam Sparks <SSparks@twacs.com>
10198Date: Fri Sep 14 11:14:42 2007 -0600
10199
10200 Update MPC8349ITX*_config to place config.tmp in right place.
10201
10202 MPC834ITX*_config does not store config.tmp at the correct locatation,
10203 causing MPC8349ITXGP to have the wrong TEXT_BASE.
10204
10205 Signed-off-by: Sam Sparks <SSparks@twacs.com>
10206 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10207
10208commit 1218abf1b5817a39a82399b4b928b00750575bda
10209Author: Wolfgang Denk <wd@denx.de>
10210Date: Sat Sep 15 20:48:41 2007 +0200
10211
10212 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
10213
10214 Signed-off-by: Wolfgang Denk <wd@denx.de>
10215
10216commit 66b3f24d665be678a9dbb125b1e84185400f63b5
10217Author: Dirk Behme <dirk.behme@googlemail.com>
10218Date: Sat Sep 15 11:55:42 2007 +0200
10219
10220 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
10221
10222 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
10223 function local.
10224
10225 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
10226
10227 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
10228
Wolfgang Denk05bf4912007-10-21 01:01:17 +020010229commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
10230Author: Michal Simek <monstr@monstr.eu>
10231Date: Sat Sep 15 00:03:35 2007 +0200
10232
10233 Synchronize with U-BOOT mainline
10234
10235commit d7fee32b7e61fe11c64e371cde79faa4768e8350
10236Author: Sam Sparks <SSparks@twacs.com>
10237Date: Fri Sep 14 11:14:42 2007 -0600
10238
10239 Update MPC8349ITX*_config to place config.tmp in right place.
10240
10241 MPC834ITX*_config does not store config.tmp at the correct locatation,
10242 causing MPC8349ITXGP to have the wrong TEXT_BASE.
10243
10244 Signed-off-by: Sam Sparks <SSparks@twacs.com>
10245 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10246 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10247
Wolfgang Denk66dcad32007-09-20 00:04:14 +020010248commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
10249Author: Bartlomiej Sieka <tur@semihalf.com>
10250Date: Thu Sep 13 18:21:48 2007 +0200
10251
10252 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
10253
10254 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10255
Wolfgang Denkde74b9e2007-10-13 21:15:39 +020010256commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
10257Author: Bartlomiej Sieka <tur@semihalf.com>
10258Date: Thu Sep 13 16:33:59 2007 +0200
10259
10260 tqm5200: Restore customary env. variable boot commands for powerpc kernels
10261
10262 - update default definitions of kernel_addr and fdt_addr env. variables
10263 - make arch/powerpc booting the default scenario
10264 - update MTD partition layout to match the above
10265
10266 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10267
Wolfgang Denk66dcad32007-09-20 00:04:14 +020010268commit f34024d4a328e6edd906456da98d2c537155c4f7
10269Author: Wolfgang Denk <wd@denx.de>
10270Date: Wed Sep 12 00:48:57 2007 +0200
10271
10272 Fix memory corruption problem on STX GP3 SSA Board.
10273
10274 Signed-off-by: Wolfgang Denk <wd@denx.de>
10275
Wolfgang Denkde74b9e2007-10-13 21:15:39 +020010276commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
10277Author: Peter Pearse <peter.pearse@arm.com>
10278Date: Tue Sep 11 15:35:01 2007 +0100
10279
10280 Final tidy
10281
Wolfgang Denk66dcad32007-09-20 00:04:14 +020010282commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
10283Author: Grzegorz Bernacki <gjb@semihalf.com>
10284Date: Tue Sep 11 15:42:11 2007 +0200
10285
10286 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
10287 scan on second pci bus.
10288
10289 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10290
10291commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
10292Author: Grzegorz Bernacki <gjb@semihalf.com>
10293Date: Tue Sep 11 12:57:52 2007 +0200
10294
10295 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
10296
10297 Bamboo has a file sdram.c which needs special treatment when building in
10298 separate directory. It has to be linked to build directory otherwise it is
10299 not seen.
10300
10301 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10302
Wolfgang Denk63640012007-10-14 00:13:19 +020010303commit d45963854eff39d575124d859419bb4953ce2c87
10304Author: Michal Simek <monstr@monstr.eu>
10305Date: Tue Sep 11 00:37:04 2007 +0200
10306
10307 [FIX] Microblaze ML401 - repare FLASH handling
10308
Wolfgang Denk66dcad32007-09-20 00:04:14 +020010309commit 38c1ef728d19950414a8ab1ccfc53767848fa346
10310Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
10311Date: Mon Sep 10 16:55:59 2007 +0100
10312
10313 Allocate CPU Architecture Code for STMicroelectronics' ST200.
10314
10315 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
10316 ---------------------------------------------------
10317
10318commit 754bac48156f8958d8f6a53a51eda88ab5758929
10319Author: Wolfgang Denk <wd@denx.de>
10320Date: Mon Sep 10 20:42:31 2007 +0200
10321
10322 Update version to match current state.
10323
10324 Signed-off-by: Wolfgang Denk <wd@denx.de>
10325
10326commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
10327Author: Grzegorz Bernacki <gjb@semihalf.com>
10328Date: Mon Sep 10 17:39:08 2007 +0200
10329
10330 [MPC512x] Streamline frame handling in the FEC driver
10331
10332 - convert frame size settings to be derived from a single base
10333 - set frame size to the recommended default value
10334
10335 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10336
10337commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
10338Author: Kyungmin Park <kmpark@infradead.org>
10339Date: Mon Sep 10 11:34:00 2007 +0900
10340
10341 Remove compiler warning: target CPU does not support interworking
10342
10343 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10344
10345commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
10346Author: Wolfgang Denk <wd@denx.de>
10347Date: Sun Sep 9 21:21:33 2007 +0200
10348
10349 Fix compile error in spc1920 config.
10350
10351 Signed-off-by: Markus Klotzbücher <mk@denx.de>
10352 Signed-off-by: Wolfgang Denk <wd@denx.de>
10353
10354commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
10355Author: Grant Likely <grant.likely@secretlab.ca>
10356Date: Fri Sep 7 09:25:07 2007 -0600
10357
10358 Bugfix: make bootm+libfdt compile on boards with no flash
10359
10360 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10361
10362commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
10363Author: Grzegorz Bernacki <gjb@semihalf.com>
10364Date: Fri Sep 7 18:35:37 2007 +0200
10365
10366 [PPC440SPe] PCIe environment settings for Katmai and Yucca
10367
10368 - 'pciconfighost' is set by default in order to be able to scan bridges
10369 behind the primary host/PCIe
10370
10371 - 'pciscandelay' env variable is recognized to allow for user-controlled
10372 delay before the PCIe bus enumeration; some peripheral devices require a
10373 significant delay before they can be scanned (e.g. LSI8408E); without the
10374 delay they are not detected
10375
10376 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10377
10378commit 7f1913938984ef6c6a46cb53e003719196d9c5de
10379Author: Grzegorz Bernacki <gjb@semihalf.com>
10380Date: Fri Sep 7 18:20:23 2007 +0200
10381
10382 [PPC440SPe] Improve PCIe configuration space access
10383
10384 - correct configuration space mapping
10385 - correct bus numbering
10386 - better access to config space
10387
10388 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
10389 first device on the first bus. We now allow to configure up to 16 buses;
10390 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
10391 peripheral devices farther in hierarchy can be identified.
10392
10393 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10394
10395commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
10396Author: Grzegorz Bernacki <gjb@semihalf.com>
10397Date: Fri Sep 7 17:46:18 2007 +0200
10398
10399 [PPC440SPe] Convert machine check exceptions handling
10400
10401 Convert using fixup mechanism to suppressing MCK for the duration of config
10402 read/write transaction: while fixups work fine with the case of a precise
10403 exception, we identified a major drawback with this approach when there's
10404 an imprecise case. In this scenario there is the following race condition:
10405 the fixup is (by design) set to catch the instruction following the one
10406 actually causing the exception; if an interrupt (e.g. decrementer) happens
10407 between those two instructions, the ISR code is executed before the fixup
10408 handler the machine check is no longer protected by the fixup handler as it
10409 appears as within the ISR code. In consequence the fixup approach is being
10410 phased out and replaced with explicit suppressing of MCK during a PCIe
10411 config read/write cycle.
10412
10413 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10414
10415commit ff7640c9ead8806b5d827f2b29f9cb2632add729
10416Author: Wolfgang Denk <wd@denx.de>
10417Date: Fri Sep 7 17:43:36 2007 +0200
10418
10419 Fix typo in MAKEALL script.
10420
10421 Signed-off-by: Wolfgang Denk <wd@denx.de>
10422
10423commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
10424Author: Grzegorz Bernacki <gjb@semihalf.com>
10425Date: Fri Sep 7 17:09:21 2007 +0200
10426
10427 [MPC512x] Proper handling of larger frames in the FEC driver
10428
10429 When frame larger than local RX buffer is received, it is split and handled
10430 by two buffer descriptors. Prior to this patch the FEC driver discarded
10431 contents of a buffer descriptor without the 'LAST' bit set, so the first
10432 part of the frame was lost in case of larger frames. This fix allows to
10433 safely combine the two pieces into the whole frame.
10434
10435 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10436
10437commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
10438Author: Rafal Jaworowski <raj@semihalf.com>
10439Date: Fri Sep 7 17:05:36 2007 +0200
10440
10441 [MPC512x] Correct fixup relocation
10442
10443 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
10444
10445commit a89cbbd27a60e6740772000fd0688ffba1c2576a
10446Author: Wolfgang Denk <wd@denx.de>
10447Date: Fri Sep 7 01:21:25 2007 +0200
10448
10449 Update CHANGELOG, minor coding style cleanup.
10450
Wolfgang Denka89cbbd2007-09-07 01:21:25 +020010451commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
10452Author: stefano babic <sbabic@denx.de>
10453Date: Thu Aug 30 23:01:49 2007 +0200
10454
10455 PXA270: Added support for TrizepsIV board.
10456
10457 This patch add support for the Trizeps IV module (520Mhz).
10458
10459 Signed-off-by: Stefano Babic <sbabic@denx.de>
10460
10461commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
10462Author: stefano babic <sbabic@denx.de>
10463Date: Thu Aug 30 22:57:04 2007 +0200
10464
10465 PXA270: Add support for multiple serial ports.
10466
10467 This patch adds support for multiple serial ports to the PXA target.
10468 FFUART, BTUART and STUART are supported.
10469
10470 Signed-off-by: Stefano Babic <sbabic@denx.de>
10471
10472commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
10473Author: stefano babic <sbabic@denx.de>
10474Date: Thu Aug 30 22:48:47 2007 +0200
10475
10476 PXA270: fix compile issue (invalid lvalue)
10477
10478 Code is broken for PXA270 due to "invalid lvalue in assignment".
10479
10480 This patch fix it in pxa-regs.h
10481
10482 Signed-off-by: Stefano Babic <sbabic@denx.de>
10483
10484commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
10485Author: Jason Jin <Jason.jin@freescale.com>
10486Date: Thu Aug 30 18:19:05 2007 +0800
10487
10488 Add BUILD_DIR support for bios emulator.
10489
10490 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
10491
10492commit b4d8a55145442f136982634862341a3e02002bda
10493Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10494Date: Fri Aug 31 14:41:51 2007 +0900
10495
10496 [MIPS] Remove inline asm string functions
10497
10498 Stop using inline string functions on MIPS as other ARCHs do so,
10499 since the optimized inline asm versions are not small.
10500
10501 This change is triggered by a following MIPS build error:
10502 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
10503 common/exports.c:32: undefined reference to `strcmp'
10504 make: *** [u-boot] Error 1
10505
10506 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10507
10508commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
10509Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10510Date: Fri Aug 31 14:41:45 2007 +0900
10511
10512 [MIPS] Update asm string header
10513
10514 This patches contains several bugfixes and cleanups in the latest upstream:
10515
10516 - Don't include linux/config.h
10517 - Remove buggy inline version of memscan.
10518 - Merge with Linux 2.6.11-rc3.
10519 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
10520 - Goodbye mips64. 31704 lines of code bite the dust.
10521 - Replace extern inline with static inline.
10522 - Fix return value of strncpy.
10523 - Remove a bunch more "$1" clobbers.
10524
10525 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10526
10527commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
10528Author: Bartlomiej Sieka <tur@semihalf.com>
10529Date: Tue Sep 4 17:31:22 2007 +0200
10530
10531 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
10532
10533 Fix incorrect blob address calculation in do_bootm_linux() that prevents
10534 booting the kernel from a multi-file image (kernel + initrd + blob).
10535
10536 Also, make minor updates to the U-Boot's output and to the coding style.
10537
10538 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10539
10540commit 041a2554ad619e80dce520c1a33210affcb6a3f2
10541Author: Gary Jennejohn <gary.jennejohn@freenet.de>
10542Date: Fri Aug 31 14:29:04 2007 +0200
10543
10544 Add support for Sil680 IDE controller.
10545
10546 o add drivers/sil680.c to support the Sil680 IDE-controller.
10547 o drivers/Makefile: add sil680.o.
10548
10549 Signed-off-by: Gary Jennejohn <garyj@denx.de>
10550
10551commit e79021223bc339df655e360645a52c457a74b067
10552Author: Grant Likely <grant.likely@secretlab.ca>
10553Date: Thu Sep 6 09:47:40 2007 -0600
10554
10555 bootm/fdt: Only process the fdt if an fdt address was provided
10556
10557 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
10558 kernels using the board info structure (instead of passing a device tree)
10559 This change allows the old style booting to be used if the fdt argument
10560 was not passed to 'bootm'.
10561
10562 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10563 Acked-by: Kim Phillips <kim.phillips@freescale.com>
10564
10565commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
10566Author: Grant Likely <grant.likely@secretlab.ca>
10567Date: Thu Sep 6 09:46:23 2007 -0600
10568
10569 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
10570
10571 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
10572
10573 Tested on: lite5200b
10574
10575 Note: the fixup functions have not been moved to a common place. This
10576 patch is targeted for immediate merging as in solves a build issue, but
10577 the final name/location of the fixups is still subject to debate. I
10578 propose to merge this now, and move the fixups in the next merge window
10579 to be usable by all targets.
10580
10581 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10582
10583commit 41bb76e941929f54a73206fb132f7a4c275543a3
10584Author: Grant Likely <grant.likely@secretlab.ca>
10585Date: Thu Sep 6 09:46:17 2007 -0600
10586
10587 libfdt: add convenience function fdt_find_and_setprop()
10588
10589 Given the path to a node, fdt_find_and_setprop() allows a property value
10590 to be set directly.
10591
10592 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10593
Wolfgang Denkde74b9e2007-10-13 21:15:39 +020010594commit 80767a6cead9990d9e77e62be947843c2c72f469
10595Author: Peter Pearse <peter.pearse@arm.com>
10596Date: Wed Sep 5 16:04:41 2007 +0100
10597
10598 Changed API name to coloured_led.h
10599 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
10600 Tidied other cpu/arm920t/start.S code
10601
Wolfgang Denka89cbbd2007-09-07 01:21:25 +020010602commit 56a9270521baaa00e12639a978302a67f61ef060
10603Author: Kumar Gala <galak@kernel.crashing.org>
10604Date: Thu Aug 30 16:18:18 2007 -0500
10605
10606 Fix ULI RTC support on MPC8544 DS
10607
10608 The RTC on the M1575 ULI chipset requires a dummy read before
10609 we are able to talk to the RTC. We accomplish this by adding a
10610 second memory region to the PHB the ULI is on and read from it.
10611
10612 The second region is added to maintain compatiabilty with Linux's
10613 view of the PCI memory map.
10614
10615 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10616
10617commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
10618Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10619Date: Thu Aug 30 01:58:48 2007 -0500
10620
10621 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
10622
10623 pcie is now differentiated from pci. Add 8641 bus-range updates.
10624
10625 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10626
Wolfgang Denkde74b9e2007-10-13 21:15:39 +020010627commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
10628Author: Peter Pearse <peter.pearse@arm.com>
10629Date: Tue Sep 4 16:18:38 2007 +0100
10630
10631 Add coloured led interface for ARM boards.
10632 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
10633
10634commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
10635Author: Peter Pearse <peter.pearse@arm.com>
10636Date: Tue Sep 4 14:49:28 2007 +0100
10637
10638 Move include/led.h to board/at91rm9200dk
10639
10640commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
10641Author: Peter Pearse <peter.pearse@arm.com>
10642Date: Tue Sep 4 14:25:51 2007 +0100
10643
10644 Ran Lindent on drivers/at45.c
10645
10646commit 557ab89d294f08dd532f21d19861b40093200a33
10647Author: Peter Pearse <peter.pearse@arm.com>
10648Date: Tue Sep 4 14:23:50 2007 +0100
10649
10650 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
10651
Wolfgang Denka89cbbd2007-09-07 01:21:25 +020010652commit 81b73dec16fd1227369a191e725e10044a9d56b8
10653Author: Gary Jennejohn <garyj@denx.de>
10654Date: Fri Aug 31 15:21:46 2007 +0200
10655
10656 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
10657
10658 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
10659 set to non-zero, because it doesn't support MRM (memory-read-
10660 multiple) correctly. We now added the possibility to configure
10661 this register in the board config file, so that the default value
10662 of 8 can be overridden.
10663
10664 Here the details of this patch:
10665
10666 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
10667 board-specific settings. As an example the sequoia board requires 0.
10668 Idea from Stefan Roese <sr@denx.de>.
10669 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
10670 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
10671 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
10672 CFG_PCI_CACHE_LINE_SIZE to 0.
10673
10674 Signed-off-by: Gary Jennejohn <garyj@denx.de>
10675 Signed-off-by: Stefan Roese <sr@denx.de>
10676
10677commit 60174746c668b309378a91488dded898e9553eae
10678Author: Wolfgang Denk <wd@denx.de>
10679Date: Fri Aug 31 10:01:51 2007 +0200
10680
10681 Fix TFTP OACK code for short packets.
10682
10683 The old code had a loop limit overflow bug which caused a semi-
10684 infinite loop for small packets, because in "i<len-8", "i" was signed,
10685 but "len" was unsigned, and "len-8" became a huge number for small
10686 values of "len".
10687
10688 This is a workaround which replaces broken commit 8f1bc284.
10689
10690 Signed-off-by: Wolfgang Denk <wd@denx.de>
10691
Wolfgang Denk63640012007-10-14 00:13:19 +020010692commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
10693Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10694Date: Thu Aug 30 15:03:05 2007 +0200
10695
10696 Reduce BOOTDELAY variable to 1 second by default for STK1002
10697
10698 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10699 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10700
10701commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
10702Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10703Date: Thu Aug 30 15:03:04 2007 +0200
10704
10705 Remove double quotation marks around MAC address for STK1002
10706
10707 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10708 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10709
Wolfgang Denka89cbbd2007-09-07 01:21:25 +020010710commit ff13ac8c7bbebb238e339592de765c546dba1073
10711Author: Wolfgang Denk <wd@denx.de>
10712Date: Thu Aug 30 14:42:15 2007 +0200
10713
10714 Backout commit 8f1bc284 as it causes TFTP to fail.
10715
10716 Signed-off-by: Wolfgang Denk <wd@denx.de>
10717
10718commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
10719Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10720Date: Thu Aug 30 02:26:17 2007 -0500
10721
10722 Revert "Fix MPC8544DS PCIe3 scsi."
10723
10724 This reverts commit 9468e680.
10725 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
10726
10727 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10728
10729commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
10730Author: Grant Likely <grant.likely@secretlab.ca>
10731Date: Wed Aug 29 18:26:24 2007 -0600
10732
10733 tftp: don't implicity trust the format of recevied packets
10734
10735 The TFTP OACK code trusts that the incoming packet is formated as
10736 ASCII text and can be processed by string functions. It also has a
10737 loop limit overflow bug where if the packet length is less than 8, it
10738 ends up looping over *all* of memory to find the 'blksize' string.
10739
10740 This patch solves the problem by forcing the packet to be null
10741 terminated and using strstr() to search for the sub string.
10742
10743 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10744
Wolfgang Denkde74b9e2007-10-13 21:15:39 +020010745commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
10746Author: Stefan Roese <sr@denx.de>
10747Date: Wed Aug 29 16:31:18 2007 +0200
10748
10749 ppc4xx: Change lwmon5 default environment to support Linux RTC
10750
10751 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
10752 to supply the RTC I2C address as bootline parameter. This patch
10753 adds support for this rtc probing parameter to the bootargs:
10754
10755 "rtc-pcf8563.probe=0,0x51"
10756
10757 Signed-off-by: Stefan Roese <sr@denx.de>
10758
Wolfgang Denka89cbbd2007-09-07 01:21:25 +020010759commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
10760Author: Kim Phillips <kim.phillips@freescale.com>
10761Date: Wed Aug 29 09:06:05 2007 -0500
10762
10763 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
10764
10765 this had slipped through the cracks, since the sbc board was added
10766 after I wrote the original patch to remove all these symbols, and
10767 before it was merged.
10768
10769 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10770
10771commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
10772Author: Wolfgang Denk <wd@denx.de>
10773Date: Wed Aug 29 14:05:30 2007 +0200
10774
10775 Add mii_init() prototype
10776
10777 to get rid of a *lot* of compiler warnings.
10778
10779 Signed-off-by: Wolfgang Denk <wd@denx.de>
10780
10781commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
10782Author: Wolfgang Denk <wd@denx.de>
10783Date: Wed Aug 29 13:35:03 2007 +0200
10784
10785 Disable network support on cmi_mpc5xx board
10786
10787 ..because it caused compiler errors and there seems to be no
10788 board maintainer to take care of this.
10789
10790 Signed-off-by: Wolfgang Denk <wd@denx.de>
10791
10792commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
10793Author: Kumar Gala <galak@kernel.crashing.org>
10794Date: Mon Aug 20 09:44:00 2007 -0500
10795
10796 Fix MPC8544DS PCIe3 scsi.
10797
10798 <ed.swarthout@freescale.com>
10799
10800 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
10801 is allocating memory space it doesn't need.
10802
10803 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
10804 Signed-off-by: Andy Fleming <afleming@freescale.com>
10805
10806commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
10807Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10808Date: Tue Aug 21 09:38:59 2007 -0500
10809
10810 8548cds fixes
10811
10812 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
10813 correct consoledev needed for linux boot.
10814 Standardize on fdt{file,addr} var to hold dtb file name.
10815
10816 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
10817
10818 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10819
10820commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
10821Author: Haiying Wang <Haiying.Wang@freescale.com>
10822Date: Thu Aug 23 15:20:54 2007 -0400
10823
10824 Enable L2 cache for MPC8568MDS board
10825
10826 The L2 cache size is 512KB for 8568, print out the correct informaiton.
10827
10828 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10829
10830commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
10831Author: Jason Jin <Jason.jin@freescale.com>
10832Date: Wed Aug 22 17:54:49 2007 +0800
10833
10834 Remove the bios emulator binary files from MAI board
10835
10836 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
10837
10838commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
10839Author: Kim Phillips <kim.phillips@freescale.com>
10840Date: Tue Aug 21 17:00:17 2007 -0500
10841
10842 support board vendor-common makefiles
10843
10844 if a board/$(VENDOR)/common/Makefile exists, build it.
10845
10846 also add the first such case, board/freescale/common/Makefile, to
10847 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
10848 dictated by board configuration.
10849
10850 thusly get rid of alternate build dir errors such as:
10851
10852 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
10853
10854 by putting the common/ mkdir command in its proper place (the common
10855 Makefile). Common bits from existing individual board Makefiles have
10856 been removed.
10857
10858 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10859
10860commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
10861Author: stefano babic <sbabic@denx.de>
10862Date: Tue Aug 21 15:52:33 2007 +0200
10863
10864 Fix: TFTP is not working on little endian systems
10865
10866 TFTP does not work anymore after multicast tftp
10867 patch was applied on little endian systems.
10868 This patch fix it.
10869
10870 Signed-off-by: Stefano Babic <sbabic@denx.de>
10871
10872commit 5f470948570526e9186f053a3003da7719604e90
10873Author: stefano babic <sbabic@denx.de>
10874Date: Tue Aug 21 15:50:33 2007 +0200
10875
10876 Fix MAC address setting in DM9000 driver.
10877
10878 The logic to check if there is a correct MAC address in the DM9000
10879 EEPROM, added in the last patch, is wrong. Now the MAC address is
10880 always taken from the environment, even if a suitable MAC is present
10881 in the EEPROM.
10882
10883 Signed-off-by: Stefano Babic <sbabic@denx.de>
10884
10885commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
10886Author: Martin Krause <martin.krause@tqs.de>
10887Date: Tue Aug 21 12:40:34 2007 +0200
10888
10889 MPC5xxx: fix some compiler warnings in USB code
10890
10891 Fix the following warnings:
10892 - usb.c:xx: warning: function declaration isn't a prototype
10893 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
10894 from pointer wihtout a cast
10895
10896 Signed-off-by: Martin Krause <martin.krase@tqs.de>
10897
10898commit 16e23c3f5dab6937f5109365416808c7f15c122b
10899Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10900Date: Mon Aug 20 23:55:33 2007 -0500
10901
10902 fsl_pci_init - Remove self PCSRBAR allocation
10903
10904 CPU physical address space was being wasted by allocating a
10905 PCSRBAR PCI inbound region to it's memory space.
10906
10907 As a rule, PCSRBAR should be left alone since it does not affect
10908 transactions from self and other masters may have changed it.
10909
10910 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
10911
10912commit 0e700ce03a23bb1921149bc77008ace7103d5289
10913Author: Martin Krause <martin.krause@tqs.de>
10914Date: Mon Aug 20 13:56:47 2007 +0200
10915
10916 Fix compiler warning in include/s3c2410.h
10917
10918 This patch fixes the "type qualifiers ignored on fuction return tpye"
10919 warning for include/s3c2410.h
10920
10921 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10922
10923commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
10924Author: Dirk Behme <dirk.behme@googlemail.com>
10925Date: Mon Aug 20 07:09:05 2007 +0200
10926
10927 Fix compilation error for omap2420h4_config.
10928
10929 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
10930 and flash_probe() calls in env_flash.c.
10931
10932 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
10933
10934commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
10935Author: Kim Phillips <kim.phillips@freescale.com>
10936Date: Fri Aug 10 14:34:14 2007 -0500
10937
10938 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
10939
10940 and make some minor corrections to the FDT part of the README.
10941
10942 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10943
10944commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
10945Author: Wolfgang Denk <wd@denx.de>
10946Date: Wed Aug 29 01:32:05 2007 +0200
10947
10948 Minor coding style cleanup.
10949
10950 Signed-off-by: Wolfgang Denk <wd@denx.de>
10951
10952commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
10953Author: Heiko Schocher <hs@pollux.denx.de>
10954Date: Tue Aug 28 17:40:33 2007 +0200
10955
10956 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
10957
10958 Signed-off-by: Heiko Schocher <hs@denx.de>
10959
10960commit f98984cb194bb34dbe1db9429d3b51133af30d07
10961Author: Heiko Schocher <hs@pollux.denx.de>
10962Date: Tue Aug 28 17:39:14 2007 +0200
10963
10964 IDE: - make ide_inb () and ide_outb () "weak", so boards can
10965 define there own I/O functions.
10966 (Needed for the pcs440ep board).
10967 - The default I/O Functions are again 8 Bit accesses.
10968 - Added CONFIG_CMD_IDE for the pcs440ep Board.
10969
10970 Signed-off-by: Heiko Schocher <hs@denx.de>
10971
Wolfgang Denk63640012007-10-14 00:13:19 +020010972commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
10973Author: Semih Hazar <semih.hazar@indefia.com>
10974Date: Mon Aug 20 19:00:01 2007 +0300
10975
10976 AVR32: Change prototype of memset
10977
10978 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
10979 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10980
Wolfgang Denka89cbbd2007-09-07 01:21:25 +020010981commit 9c02defc29b57945b600714cf61ddfd02b02fb14
10982Author: Yuri Tikhonov <yur@emcraft.com>
10983Date: Sat Aug 25 05:07:16 2007 +0200
10984
10985 POST: limit memory test area to not touch global data anymore
10986
10987 As experienced on lwmon5, on some boards the POST memory test can
10988 corrupt the global data buffer (bd). This patch fixes this issue
10989 by checking and limiting this area.
10990
10991 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
10992 Signed-off-by: Stefan Roese <sr@denx.de>
10993
10994commit 75e1a84d483e36be10e206e539b028c4889e1158
10995Author: Stefan Roese <sr@denx.de>
10996Date: Fri Aug 24 15:41:42 2007 +0200
10997
10998 ppc4xx: Add RTC POST test to lwmon5 board configuration
10999
11000 Since this RTC POST test is taking quite a while to complete
11001 it's only initiated upon special keypress same as the complete
11002 memory POST.
11003
11004 Signed-off-by: Stefan Roese <sr@denx.de>
11005
11006commit d7bfa620037a6d2210159387571bdf93aa32c162
11007Author: Stefan Roese <sr@denx.de>
11008Date: Fri Aug 24 15:19:10 2007 +0200
11009
11010 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
11011
11012 Signed-off-by: Stefan Roese <sr@denx.de>
11013
11014commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
11015Author: Stefan Roese <sr@denx.de>
11016Date: Thu Aug 23 11:02:37 2007 +0200
11017
11018 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
11019
11020 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
11021 board. Now the "eeprom" command can be used to read/write from/to this
11022 device. Additionally a new command was added "eepromwp" to en-/disable
11023 the write-protect of this 2nd EEPROM.
11024
11025 The 1st EEPROM is not affected by this write-protect command.
11026
11027 Signed-off-by: Stefan Roese <sr@denx.de>
11028
11029commit c64fb30e4c5976007d56fc1789c7a0666082b536
11030Author: Stefan Roese <sr@denx.de>
11031Date: Wed Aug 22 08:56:09 2007 +0200
11032
11033 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
11034
11035 Signed-off-by: Stefan Roese <sr@denx.de>
11036
11037commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
11038Author: Stefan Roese <sr@denx.de>
11039Date: Tue Aug 21 16:27:57 2007 +0200
11040
11041 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
11042
11043 This patch adds support for the matrix keyboard on the lwmon5 board.
11044 Since the implementation in the dsPCI is kind of compatible with the
11045 "old" lwmon board, most of the code is copied from the lwmon
11046 board directory.
11047
11048 Signed-off-by: Stefan Roese <sr@denx.de>
11049
11050commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
11051Author: Wolfgang Denk <wd@denx.de>
11052Date: Sun Aug 19 10:27:34 2007 +0200
11053
11054 Fix some build errors.
11055
11056 Signed-off-by: Wolfgang Denk <wd@denx.de>
11057
11058commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
11059Author: Wolfgang Denk <wd@denx.de>
11060Date: Sat Aug 18 22:00:38 2007 +0200
11061
11062 Update CHANGELOG.
11063
Wolfgang Denk05675732007-08-18 22:00:38 +020011064commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
11065Author: Kim Phillips <kim.phillips@freescale.com>
11066Date: Thu Aug 16 22:52:39 2007 -0500
11067
11068 lib_ppc: make board_add_ram_info weak
11069
11070 platforms wishing to display RAM diagnostics in addition to size,
11071 can do so, on one line, in their own board_add_ram_info()
11072 implementation.
11073
11074 this consequently eliminates CONFIG_ADD_RAM_INFO.
11075
11076 Thanks to Stefan for the hint.
11077
11078 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11079
11080commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
11081Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
11082Date: Fri Aug 17 12:43:44 2007 +0900
11083
11084 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
11085
11086 This patch has been sent on:
11087 - 6 Jun 2007
11088
11089 Many users of PCI config read routines tend to ignore the function
11090 ret value, and are only concerned about the contents of *val. Based
11091 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
11092 the *val on dword read error.
11093
11094 Without this fix, for example, we'll go on scanning bus with vendor or
11095 header_type uninitialized. This brings many unnecessary config trials.
11096
11097 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
11098
11099commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
11100Author: Stefan Roese <sr@denx.de>
11101Date: Sat Aug 18 14:37:52 2007 +0200
11102
11103 ColdFire: Fix some remaining problems with CFG_CMD_
11104
11105 Signed-off-by: Stefan Roese <sr@denx.de>
11106
11107commit 8280f6a1c43247616b68224675188e5ccd124650
11108Author: Stefan Roese <sr@denx.de>
11109Date: Sat Aug 18 14:33:02 2007 +0200
11110
11111 Coding style cleanup
11112
11113 Signed-off-by: Stefan Roese <sr@denx.de>
11114
11115commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
11116Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11117Date: Thu Aug 16 19:23:50 2007 -0500
11118
11119 ColdFire: Add M5235EVB Platform for MCF523x
11120
11121 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11122
11123commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
11124Author: Kim Phillips <kim.phillips@freescale.com>
11125Date: Fri Aug 17 09:30:00 2007 -0500
11126
11127 mpc83xx: fix typo in DDR2 programming
11128
11129 introduced in the implement board_add_ram_info patch as I was cleaning out the
11130 magic numbers. sorry.
11131
11132 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11133
11134commit e58fe95784d2514fc9c21028dc59f2b319a35d80
11135Author: Kim Phillips <kim.phillips@freescale.com>
11136Date: Thu Aug 16 22:53:09 2007 -0500
11137
11138 mpc83xx: move freescale boards to boards/freescale
11139
11140 includes build fixes.
11141
11142 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11143
11144commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
11145Author: Kim Phillips <kim.phillips@freescale.com>
11146Date: Thu Aug 16 22:52:59 2007 -0500
11147
11148 mpc83xx: suppress unused variable 'val8' warning
11149
11150 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11151
11152commit bbea46f76f767b919070b4829bf34c86bd223248
11153Author: Kim Phillips <kim.phillips@freescale.com>
11154Date: Thu Aug 16 22:52:48 2007 -0500
11155
11156 mpc83xx: implement board_add_ram_info
11157
11158 add board_add_ram_info, to make memory diagnostic output more
11159 consistent. u-boot banner output now looks like:
11160
11161 DRAM: 256 MB (DDR1, 64-bit, ECC on)
11162
11163 and for boards with SDRAM on the local bus, a line such as this is
11164 added:
11165
11166 SDRAM: 64 MB (local bus)
11167
11168 also replaced some magic numbers with their equivalent define names.
11169
11170 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11171
11172commit 14778585d1389d86d5846efec29e5fce892680ce
11173Author: Tony Li <tony.li@freescale.com>
11174Date: Fri Aug 17 10:35:59 2007 +0800
11175
11176 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
11177
11178 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
11179 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
11180
11181 Signed-off-by Tony Li <tony.li@freescale.com>
11182
11183commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
11184Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11185Date: Thu Aug 16 15:05:11 2007 -0500
11186
11187 ColdFire: Add M54455EVB for MCF5445x
11188
11189 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11190
11191commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
11192Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11193Date: Thu Aug 16 13:20:50 2007 -0500
11194
11195 ColdFire: Add M5253EVBE platform for MCF52x2
11196
11197 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11198
11199commit a605aacd8324094199402816cc6d9124aba57b8d
11200Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11201Date: Thu Aug 16 05:04:31 2007 -0500
11202
11203 ColdFire: Add M5249EVB platform for MCF52x2
11204
11205 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11206
11207commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
11208Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11209Date: Wed Aug 15 20:32:06 2007 -0500
11210
11211 ColdFire: Update Freescale MCF52x2 platforms
11212
11213 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11214
11215commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
11216Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11217Date: Wed Aug 15 19:55:10 2007 -0500
11218
11219 ColdFire: Update EB+MCF-EV123 platform
11220
11221 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11222
11223commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
11224Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11225Date: Wed Aug 15 19:46:38 2007 -0500
11226
11227 ColdFire: update TASREG platform for MCF52x2
11228
11229 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11230
11231commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
11232Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11233Date: Wed Aug 15 19:45:51 2007 -0500
11234
11235 ColdFire: update r5200 platform for MCF52x2
11236
11237 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11238
11239commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
11240Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11241Date: Wed Aug 15 19:43:20 2007 -0500
11242
11243 ColdFire: idmr platform MCF52x2 update
11244
11245 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11246
11247commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
11248Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11249Date: Wed Aug 15 19:41:06 2007 -0500
11250
11251 ColdFire: cobra5272 platform for MCF52x2 update
11252
11253 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11254
11255commit 56115665b4a64c10c01440c57749b265e0908fa4
11256Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11257Date: Wed Aug 15 19:38:15 2007 -0500
11258
11259 ColdFire: MCF52x2 Header files update
11260
11261 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11262
11263commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
11264Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11265Date: Wed Aug 15 19:21:21 2007 -0500
11266
11267 ColdFire: MCF52x2 update
11268
11269 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11270
11271commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
11272Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11273Date: Wed Aug 15 18:46:11 2007 -0500
11274
11275 ColdFire: MCF5329 update cache
11276
11277 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11278
11279commit 7171977fb8fd77cfb6676953fa9a05789c450513
11280Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11281Date: Wed Aug 15 15:40:20 2007 -0500
11282
11283 ColdFire: MCF5329 header file clean up
11284
11285 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11286
11287commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
11288Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11289Date: Wed Aug 15 15:39:17 2007 -0500
11290
11291 ColdFire: MCF5329 Update and cleanup
11292
11293 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11294
11295commit 10327dc5541f947c0cf7e31fef86c4706169607a
11296Author: Andy Fleming <afleming@freescale.com>
11297Date: Thu Aug 16 16:35:02 2007 -0500
11298
11299 Add CONFIG_HAS_ETH0 to all boards with TSEC
11300
11301 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
11302 to update TSEC1's device-tree node, so we need to add it
11303 to all the boards with TSECs. Do this for 83xx and 86xx, too,
11304 since they will eventually do something similar.
11305
11306 Signed-off-by: Andy Fleming <afleming@freescale.com>
11307
11308commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
11309Author: Kumar Gala <galak@kernel.crashing.org>
11310Date: Thu Aug 16 15:05:04 2007 -0500
11311
11312 Update MPC8544 DS PCI memory map
11313
11314 The PCIe bus that the ULI M1575 is connected to has no possible way of
11315 needing more than the fixed amount of IO & Memory space needed by the ULI.
11316
11317 So make it use far less IO & memory space and have it use the shared LAW. This
11318 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
11319 by each bus.
11320
11321 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11322
11323commit ea5877e31ed63ade948fd1293895ec23fe01472e
11324Author: Kumar Gala <galak@kernel.crashing.org>
11325Date: Thu Aug 16 11:01:21 2007 -0500
11326
11327 Fix up some fdt issues on 8544DS
11328
11329 It looks like we had a merge issue that duplicated a bit of code
11330 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
11331 the MAC address properly set in the device tree on boot for TSEC1
11332
11333 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11334
11335commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
11336Author: Niklaus Giger <niklaus.giger@netstal.com>
11337Date: Thu Aug 16 15:16:03 2007 +0200
11338
11339 PPC4xx:HCU4/5 cleanup
11340
11341 Minor cleanups to confirm to the u-boot coding style.
11342 Some german expressions -> english.
11343 HCU5 enforces a unique IP adress for a given slot in the rack.
11344
11345 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11346
11347commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
11348Author: Niklaus Giger <niklaus.giger@netstal.com>
11349Date: Thu Aug 16 15:16:02 2007 +0200
11350
11351 PPC4xx:HCU4/5 cleanup ecc/sdram init
11352
11353 Make ecc initialisation robust, as DDR2-ECC errors may be generated
11354 while zeroing the RAM.
11355
11356 Return 16 bytes (a cacheline) less than the available memory, as the
11357 board and/or PPC440EPx might have problems accessing the last bytes.
11358
11359 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11360
11361commit d35b508a55508535b6e8445b718585d27df733d3
11362Author: Kim Phillips <kim.phillips@freescale.com>
11363Date: Wed Aug 15 22:29:56 2007 -0500
11364
11365 fdt: suppress unused variable 'bd' warning
11366
11367 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11368
11369commit 82bd9ee77490588d4da785d75829ca63d0176baf
11370Author: Andy Fleming <afleming@freescale.com>
11371Date: Wed Aug 15 20:06:50 2007 -0500
11372
11373 Fix warnings from of_data copy fix
11374
11375 Forgot to cast of_flat_tree to ulong.
11376
11377 Signed-off-by: Andy Fleming <afleming@freescale.com>
11378
11379commit 7613afda77d5eec0f47d303025b0c661b70e4c73
11380Author: Andy Fleming <afleming@freescale.com>
11381Date: Wed Aug 15 20:03:44 2007 -0500
11382
11383 Don't wait for disconnected TSECs
11384
11385 The TSEC driver's PHY code waits a long time for autonegotiation to
11386 complete, even if the link is down. The PHY knows the link is
11387 down or up before autonegotiation completes, so we can short-circuit
11388 the process if the link is down.
11389
11390 Signed-off-by: Andy Fleming <afleming@freescale.com>
11391
11392commit b96c83d4ae475a70ef2635cd0e748174c44c8601
11393Author: Andy Fleming <afleming@freescale.com>
11394Date: Wed Aug 15 20:03:34 2007 -0500
11395
11396 Fix numerous bugs in the 8568 UEC support
11397
11398 Actually, fixed a large bug in the UEC for *all* platforms.
11399 How did this ever work?
11400
11401 uec_init() did not follow the spec for eth_init(), and returned
11402 0 on success. Switch it to return the link like tsec_init()
11403 (and 0 on error)
11404
11405 The immap for the 8568 was defined based on MPC8568, rather than
11406 CONFIG_MPC8568
11407
11408 CONFIG_QE was off
11409
11410 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
11411
11412 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
11413 enabled
11414
11415 Signed-off-by: Andy Fleming <afleming@freescale.com>
11416
11417commit 3a79013e2adda53332dfd0b511066a805e929a9d
11418Author: Andy Fleming <afleming@freescale.com>
11419Date: Wed Aug 15 20:03:25 2007 -0500
11420
11421 Define tsec flag values in config files
11422
11423 The tsec_info structure and array has a "flags" field for each
11424 ethernet controller. This field is the only reason there are
11425 settings. Switch to defining TSECn_FLAGS for each controller
11426 in the config header, and we can greatly simplify the array, and
11427 also simplify the addition of future boards.
11428
11429 Signed-off-by: Andy Fleming <afleming@freescale.com>
11430
11431commit ec7238229507e7f47533a611ea8c53319d234cf3
11432Author: Andy Fleming <afleming@freescale.com>
11433Date: Wed Aug 15 20:03:13 2007 -0500
11434
11435 Add support for building all boards with a TSEC
11436
11437 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
11438 Now we can do a MAKEALL test on all of them!
11439
11440 Signed-off-by: Andy Fleming <afleming@freescale.com>
11441
11442commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
11443Author: Andy Fleming <afleming@freescale.com>
11444Date: Wed Aug 15 17:30:56 2007 -0500
11445
11446 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
11447
11448 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
11449 neglected to *also* put the code inside the similar #ifdef
11450 for CONFIG_OF_FLAT_TREE.
11451
11452 Signed-off-by: Andy Fleming <afleming@freescale.com>
11453
11454commit 78f9fef7f406078c8bf7191e665a73f795157746
11455Author: Scott Wood <scottwood@freescale.com>
11456Date: Wed Aug 15 15:46:46 2007 -0500
11457
11458 mpc885ads: Don't define CONFIG_BZIP2.
11459
11460 bzip2 requires a significant chunk of malloc space, and there isn't
11461 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
11462 and a downloaded image at 0x400000.
11463
11464 Signed-off-by: Scott Wood <scottwood@freescale.com>
11465
11466commit 002275a3ed8b114885f6702d6d544d0780dfe689
11467Author: Michal Simek <Monstr@seznam.cz>
11468Date: Thu Aug 16 08:54:10 2007 +0200
11469
11470 Bios emulator - fix microblaze toolchain problem
11471
11472 microblaze CPU have problem with bios_emulator code.
11473 Microblaze toolchain doesn't support PRAGMA PACK.
11474
11475 Signed-off-by: Michal Simek <monstr@monstr.eu>
11476
11477commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
11478Author: Wolfgang Denk <wd@denx.de>
11479Date: Thu Aug 16 11:51:04 2007 +0200
11480
11481 Minor Coding Style fix; Update CHANGELOG file.
11482
11483 Signed-off-by: Wolfgang Denk <wd@denx.de>
11484
11485commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
11486Author: Stefan Roese <sr@denx.de>
11487Date: Thu Aug 16 11:21:49 2007 +0200
11488
11489 ppc4xx: Remove #warning in esd auto_update.c
11490
11491 Signed-off-by: Stefan Roese <sr@denx.de>
11492
Wolfgang Denka5a38f42007-08-16 11:51:04 +020011493commit 2d78074d2e806edc380c1464eb9e5df335ece65e
11494Author: Stefan Roese <sr@denx.de>
11495Date: Fri Jun 22 17:32:28 2007 +0200
11496
11497 ppc7xx: Update CPCI750 board
11498
11499 This small CPCI750 update extends the board specific command
11500 "show_config" to display the Marvell strapping registers and
11501 extends the PCI IDE controller.
11502
11503 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
11504 Signed-off-by: Stefan Roese <sr@denx.de>
11505
Wolfgang Denk63640012007-10-14 00:13:19 +020011506commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
11507Author: Michal Simek <monstr@monstr.eu>
11508Date: Thu Aug 16 10:46:28 2007 +0200
11509
11510 [FIX] Changes for bios_emulator code for others architecture
11511
11512commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
11513Author: Michal Simek <monstr@monstr.eu>
11514Date: Thu Aug 16 10:45:09 2007 +0200
11515
11516 [FIX] Remove unused include file
11517
Wolfgang Denk05675732007-08-18 22:00:38 +020011518commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
11519Author: Stefan Roese <sr@denx.de>
11520Date: Thu Aug 16 10:18:33 2007 +0200
11521
11522 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
11523
11524 Signed-off-by: Stefan Roese <sr@denx.de>
11525
11526commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
11527Author: Stefan Roese <sr@denx.de>
11528Date: Thu Aug 16 09:54:51 2007 +0200
11529
11530 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
11531
11532 Signed-off-by: Stefan Roese <sr@denx.de>
11533
11534commit 02ba7022f62bb75908296c58c63866e1d294b69a
11535Author: Stefan Roese <sr@denx.de>
11536Date: Thu Aug 16 09:52:29 2007 +0200
11537
11538 ppc4xx: Update Sequoia/Rainier bootstrap command
11539
11540 As suggested by David Mitchell, here an update for the Sequoia/Rainier
11541 bootstrap command.
11542
11543 Signed-off-by: Stefan Roese <sr@denx.de>
11544
11545commit 35cc4e4823668e8745854899cfaedd4489beb0ef
11546Author: Kim Phillips <kim.phillips@freescale.com>
11547Date: Wed Aug 15 22:30:39 2007 -0500
11548
11549 mpc83xx: enable libfdt by default on freescale boards
11550
11551 this enables libfdt code by default for the
11552 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
11553 mpc8349itx and gp boards.
11554
11555 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11556
11557commit 3fde9e8b22cfbd7af489214758f9839a206576cb
11558Author: Kim Phillips <kim.phillips@freescale.com>
11559Date: Wed Aug 15 22:30:33 2007 -0500
11560
11561 mpc83xx: migrate remaining freescale boards to libfdt
11562
11563 this adds libfdt support code for the freescale
11564 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
11565 and gp boards.
11566
11567 Boards remain compatible with OF_FLAT_TREE.
11568
11569 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11570
11571commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
11572Author: Kim Phillips <kim.phillips@freescale.com>
11573Date: Wed Aug 15 22:30:26 2007 -0500
11574
11575 mpc83xx: move common /memory node update mechanism to cpu.c
11576
11577 also adds common prototypes to include/common.h.
11578
11579 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11580
11581commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
11582Author: Kim Phillips <kim.phillips@freescale.com>
11583Date: Wed Aug 15 22:30:19 2007 -0500
11584
11585 mpc83xx: remaining 8360 libfdt fixes
11586
11587 PCI clocks and QE frequencies weren't being updated, and the core clock
11588 was being updated incorrectly. This patch also adds a /memory node if
11589 it doesn't already exist prior to update.
11590
11591 plus some cosmetic trimming to single line comments.
11592
11593 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11594
11595commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
11596Author: Kim Phillips <kim.phillips@freescale.com>
11597Date: Wed Aug 15 22:30:12 2007 -0500
11598
11599 mpc83xx: fix UEC2->1 typo in libfdt setup code
11600
11601 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11602
11603commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
11604Author: Kim Phillips <kim.phillips@freescale.com>
11605Date: Wed Aug 15 22:30:05 2007 -0500
11606
11607 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
11608
11609 and reorder the existing 83xx maintainers alpha.
11610
11611 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11612
Wolfgang Denk63640012007-10-14 00:13:19 +020011613commit 5b4de9309d7a03aa1db2e5391ab696363391f460
11614Author: Michal Simek <monstr@monstr.eu>
11615Date: Wed Aug 15 21:15:05 2007 +0200
11616
11617 [FIX] Resolve problem with warnings
11618 microblaze toolchain don't support PRAGMA PACK.
11619
11620commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
11621Author: Michal Simek <monstr@monstr.eu>
11622Date: Wed Aug 15 21:05:07 2007 +0200
11623
11624 [FIX] Correction command setting for Microblaze boards
11625
11626commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
11627Author: Michal Simek <monstr@monstr.eu>
11628Date: Wed Aug 15 21:03:41 2007 +0200
11629
11630 [FIX] Correction command definition
11631
Wolfgang Denka5a38f42007-08-16 11:51:04 +020011632commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
11633Author: Jon Loeliger <jdl@freescale.com>
11634Date: Wed Aug 15 11:55:35 2007 -0500
11635
11636 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
11637
11638 Remove a leftover in net/tftp.c while we're at it.
11639
11640 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11641
11642commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
11643Author: Jon Loeliger <jdl@freescale.com>
11644Date: Wed Aug 15 12:20:40 2007 -0500
11645
11646 Move the MPC8641HPCN board under board/freescale.
11647
11648 Minor path corrections needed to ensure buildability.
11649
11650 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11651
11652commit 8662577fe36fdb6a44b55b998d9daac6392a736a
11653Author: Jon Loeliger <jdl@freescale.com>
11654Date: Wed Aug 15 11:46:22 2007 -0500
11655
11656 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
11657
11658 Remove a leftover in net/tftp.c while we're at it.
11659
11660 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11661
11662commit 210f463c71917b7a4495c2103c228b9c179ae64d
11663Author: Jerry Van Baren <gvb.uboot@gmail.com>
11664Date: Wed Aug 15 11:13:15 2007 -0400
11665
11666 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
11667
11668 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
11669 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
11670 when it should have gone inside of the conditional. As a result, it
11671 broke non-LIBFDT board builds.
11672
11673 Also added a missing "not." to the comment.
11674
11675 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11676
Wolfgang Denk05675732007-08-18 22:00:38 +020011677commit 0e19209767194a97cec6d93dba9e64d1da8d548e
11678Author: Niklaus Giger <niklaus.giger@netstal.com>
11679Date: Wed Aug 15 12:14:23 2007 +0200
11680
11681 PPC4xx:HCU4/5-Board fix compile warning
11682
11683 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11684
Wolfgang Denka5a38f42007-08-16 11:51:04 +020011685commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
11686Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11687Date: Tue Aug 14 14:06:45 2007 -0500
11688
11689 Fix malloc size error in ahci_init_one.
11690
11691 Typically this causes scsi init to corrupt the
11692 devlist and break the coninfo command.
11693 Fix a compiler size warning.
11694
11695 Signed-off-by: Jason Jin <jason.jin@freescale.com>
11696 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11697 Acked-by: Andy Fleming <afleming@freescale.com>
11698
11699commit b361acd64fd2525c081b9b288b0804efe209c0e9
11700Author: ksi@koi8.net <ksi@koi8.net>
11701Date: Tue Aug 14 10:02:16 2007 -0700
11702
11703 TI DaVinci - fix unsupported %hhx format
11704
11705 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
11706
11707commit f01dbb5424a81453c81190dd30e945891466f621
11708Author: Wolfgang Denk <wd@denx.de>
11709Date: Tue Aug 14 18:42:36 2007 +0200
11710
11711 Coding style cleanup. Update CHANGELOG.
11712
11713 Signed-off-by: Wolfgang Denk <wd@denx.de>
11714
Wolfgang Denkf01dbb52007-08-14 18:42:36 +020011715commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
11716Author: Andy Fleming <afleming@freescale.com>
11717Date: Tue Aug 14 10:32:59 2007 -0500
11718
11719 Fix initrd/dtb interaction
11720
11721 The original code would wrongly relocate the blob to be right before
11722 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
11723 if it is defined. So we make two changes:
11724
11725 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
11726
11727 2) If the blob is being relocated, relocate it before kbd, not initrd
11728
11729 Signed-off-by: Andy Fleming <afleming@freescale.com>
11730
11731commit e54b970173769307a116bd34028b6d0c2eea2a4e
11732Author: Peter Pearse <peter.pearse@arm.com>
11733Date: Tue Aug 14 15:40:00 2007 +0100
11734
11735 Supply spi interface in at45.c
11736
Wolfgang Denka5a38f42007-08-16 11:51:04 +020011737commit 4ce846ec59f36b85d6644a769690ad3feb667575
11738Author: Stefan Roese <sr@denx.de>
11739Date: Tue Aug 14 15:12:01 2007 +0200
11740
11741 POST: Fix merge problem
11742
11743 Signed-off-by: Stefan Roese <sr@denx.de>
11744
11745commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
11746Author: Stefan Roese <sr@denx.de>
11747Date: Tue Aug 14 15:03:17 2007 +0200
11748
11749 Coding style cleanup
11750
11751 Signed-off-by: Stefan Roese <sr@denx.de>
11752
11753commit 779e975117a75e91fcebe226a63104dbfb924ab1
11754Author: Stefan Roese <sr@denx.de>
11755Date: Tue Aug 14 14:44:41 2007 +0200
11756
11757 ppc4xx: Add initial Zeus (PPC405EP) board support
11758
11759 Signed-off-by: Stefan Roese <sr@denx.de>
11760
11761commit c5a172a5fd636c12467429e3f7910e53773979c6
11762Author: Stefan Roese <sr@denx.de>
11763Date: Tue Aug 14 14:41:55 2007 +0200
11764
11765 POST: Add option for external ethernet loopback test
11766
11767 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
11768 is not done using an internal loopback connection, but by assuming
11769 that an external loopback connector is plugged into the board.
11770
11771 Signed-off-by: Stefan Roese <sr@denx.de>
11772
11773commit eb2b4010ae426245172988804ee8d9193fb41038
11774Author: Stefan Roese <sr@denx.de>
11775Date: Tue Aug 14 14:39:44 2007 +0200
11776
11777 POST: Add ppc405 support to cache and UART POST
11778
11779 Signed-off-by: Stefan Roese <sr@denx.de>
11780
Wolfgang Denkf01dbb52007-08-14 18:42:36 +020011781commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
11782Author: Peter Pearse <peter.pearse@arm.com>
11783Date: Tue Aug 14 10:46:32 2007 +0100
11784
11785 Replace lost end of at45.c.
11786
11787commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
11788Author: Peter Pearse <peter.pearse@arm.com>
11789Date: Tue Aug 14 10:30:06 2007 +0100
11790
11791 Update Makefiles for merged and split at45.c.
11792
11793commit 3454cece2db57cb9eb7087995f7e73066a163f71
11794Author: Peter Pearse <peter.pearse@arm.com>
11795Date: Tue Aug 14 10:21:06 2007 +0100
11796
11797 Delete the merged files.
11798
11799commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
11800Author: Peter Pearse <peter.pearse@arm.com>
11801Date: Tue Aug 14 10:14:05 2007 +0100
11802
11803 Add the files.
11804
11805commit d4fc6012fd0a5c211b825691f44b06f8032c0551
11806Author: Peter Pearse <peter.pearse@arm.com>
11807Date: Tue Aug 14 10:10:52 2007 +0100
11808
11809 Add MACH_TYPE records for several AT91 boards.
11810 Merge to two at45.c files into a common file, split to at45.c and spi.c
11811 Fix spelling error in DM9161 PHY Support.
11812 Initialize at91rm9200 board (and set LED).
11813 Add PIO control for at91rm9200dk LEDs and Mux.
11814 Change dataflash partition boundaries to be compatible with Linux 2.6.
11815
11816 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
11817 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
11818
11819commit 4ef35e53c693556c54b0c22d6f873de87bade253
11820Author: Wolfgang Denk <wd@denx.de>
11821Date: Tue Aug 14 09:54:46 2007 +0200
11822
11823 Coding style cleanup, update CHANGELOG
11824
11825 Signed-off-by: Wolfgang Denk <wd@denx.de>
11826
Wolfgang Denk4ef35e52007-08-14 09:54:46 +020011827commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
11828Author: Wolfgang Denk <wd@denx.de>
11829Date: Tue Aug 14 09:47:27 2007 +0200
11830
11831 Coding style cleanup; rebuild CHANGELOG
11832
11833commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
11834Author: Randy Vinson <rvinson@linuxbox.(none)>
11835Date: Tue Feb 27 19:42:22 2007 -0700
11836
11837 85xxCDS: Add make targets for legacy systems.
11838
11839 The PCI ID select values on the Arcadia main board differ depending
11840 on the version of the hardware. The standard configuration supports
11841 Rev 3.1. The legacy target supports Rev 2.x.
11842
11843 Signed-off-by Randy Vinson <rvinson@mvista.com>
11844
11845commit e41094c7e38177c755fbd9b182018069614f080d
11846Author: Andy Fleming <afleming@freescale.com>
11847Date: Tue Aug 14 01:50:09 2007 -0500
11848
11849 85xxCDS: Enable the VIA PCI-to-ISA bridge.
11850
11851 Author: Randy Vinson <rvinson@linuxbox.(none)>
11852
11853 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
11854 Arcadia main board.
11855
11856 Signed-off-by: Randy Vinson <rvinson@mvista.com>
11857 Signed-off-by: York Sun <yorksun@freescale.com>
11858
11859commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
11860Author: Andy Fleming <afleming@freescale.com>
11861Date: Tue Aug 14 00:14:25 2007 -0500
11862
11863 Add support for UEC to 8568
11864
11865 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11866 Signed-off-by: Andy Fleming <afleming@freescale.com>
11867
11868commit c59e4091ffe0148398b9e9ff14a019ea038b7432
11869Author: Haiying Wang <Haiying.Wang@freescale.com>
11870Date: Tue Jun 19 14:18:34 2007 -0400
11871
11872 Add PCI support for MPC8568MDS board
11873
11874 This patch is against u-boot-mpc85xx.git of www.denx.com
11875
11876 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11877 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
11878
11879commit d111d6382c99fdea08c2312eeeae8786945e189a
11880Author: Haiying Wang <Haiying.Wang@freescale.com>
11881Date: Tue Jun 19 14:18:32 2007 -0400
11882
11883 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
11884
11885 This patch is against u-boot-mpc85xx.git of www.denx.com
11886
11887 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
11888 both MPC8548CDS board and MPC8568MDS board, especially for supporting
11889 533MHz DDR2.
11890
11891 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
11892 DDR2 on all current board versions especially ver 1.92 or later to bring
11893 up.
11894
11895 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11896
11897commit 3db0bef59eab1155801618cef5c481e97553b597
11898Author: Kumar Gala <galak@kernel.crashing.org>
11899Date: Tue Aug 7 18:07:27 2007 -0500
11900
11901 Use an absolute address when jumping out of 4k boot page
11902
11903 On e500 when we leave the 4k boot page we should use an absolute address since
11904 we don't know where the board code may want us to be really running at.
11905
11906 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11907
11908commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
11909Author: Andy Fleming <afleming@freescale.com>
11910Date: Mon Aug 13 14:49:59 2007 -0500
11911
11912 MPC85xx BA bits not set for 3-bit bank address DIMM
11913
11914 The current implementation does not set the number of bank address bits
11915 (BA) in the processor. The default assumes 2 logical bank bits. This
11916 works fine for a DIMM that uses devices with 4 internal banks (SPD
11917 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
11918 devices with 8 internal banks (SPD byte17 = 0x8).
11919
11920 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
11921
11922commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
11923Author: Andy Fleming <afleming@freescale.com>
11924Date: Mon Aug 13 14:38:06 2007 -0500
11925
11926 Fix minor 85xx warnings
11927
11928 Some patches had inserted warnings into the build:
11929 * mpc8560ads declared data without using it
11930 * cpu_init declared ecm and immap without using it in all CONFIGs
11931 * MPC8548CDS.h had its default filenames changed so that they contained
11932 "\m" in the paths. Made the defaults not Windows-specific (or
11933 anything-specific)
11934
11935 Signed-off-by: Andy Fleming <afleming@freescale.com>
11936
11937commit f2cff6b104f82b993bef6086ce0c97159bbe1add
11938Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11939Date: Fri Jul 27 01:50:52 2007 -0500
11940
11941 8548cds PCIE support.
11942
11943 Make the early L1 cache stack region guarded to prevent speculative
11944 fetches outside the locked range.
11945
11946 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
11947 init.S whitespace cleanup.
11948
11949 Allow TEXT_BASE value to be specified on command line. This allows it
11950 to be set to 0xfffc0000 which cuts the uboot binary in half.
11951
11952 Clear and enable lbc and ecm errors.
11953
11954 Update last_busno in device-tree for pci and pcie.
11955
11956 Remove load of obsolete cpu/mpc85xx/pci.0
11957
11958 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11959 Acked-by: Andy Fleming <afleming@freescale.com>
11960
11961commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
11962Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11963Date: Fri Jul 27 01:50:51 2007 -0500
11964
11965 8544ds PCIE support
11966
11967 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
11968
11969 Enable LBC and ECM errors and clear error registers.
11970
11971 Add tftpflash env var to get uboot from tftp server and flash it.
11972
11973 Add pci/pcie convenience env vars to display register space:
11974 "run pcie3regs" to see all pcie3 ccsr registers
11975 "run pcie3cfg" to see all cfg registers
11976 Whitespace cleanup and MPC8544DS.h
11977
11978 Enable CONFIG_INTERRUPTS.
11979
11980 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11981 Acked-by: Andy Fleming <afleming@freescale.com>
11982
11983commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
11984Author: Andy Fleming <afleming@freescale.com>
11985Date: Tue Aug 14 01:34:21 2007 -0500
11986
11987 85xx start.S cleanup and exception support
11988
11989 From: Ed Swarthout <Ed.Swarthout@freescale.com>
11990
11991 Support external interrupts from platform to eliminate system hangs.
11992 Define CONFIG_INTERRUPTS board configure option to enable.
11993 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
11994
11995 Remove extra cpu initialization redundant with hardware initialization.
11996 Whitespace cleanup.
11997
11998 Define and use _START_OFFSET consistent with other processors using
11999 ppc_asm.tmpl
12000
12001 Move additional code from .text to boot page to make room for
12002 exception vectors at start of image.
12003
12004 Handle Machine Check, External and Critical exceptions.
12005
12006 Fix e500 machine check error determination in traps.c
12007
12008 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
12009
12010 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12011 Acked-by: Andy Fleming <afleming@freescale.com>
12012
12013commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
12014Author: Andy Fleming <afleming@freescale.com>
12015Date: Tue Aug 14 01:33:18 2007 -0500
12016
12017 Add MPC8544DS README
12018
12019 Signed-off-by: Andy Fleming <afleming@freescale.com>
12020
12021commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
12022Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12023Date: Fri Jul 27 01:50:48 2007 -0500
12024
12025 85xx allow debugger to configure ddr.
12026
12027 Only check for mpc8548 rev 1 when compiled for 8548.
12028
12029 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12030 Acked-by: Andy Fleming <afleming@freescale.com>
12031
12032commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
12033Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12034Date: Fri Jul 27 01:50:47 2007 -0500
12035
12036 mpc85xx L2 cache reporting and SRAM relocation option.
12037
12038 Allow debugger to override flash cs0/cs1 settings to enable alternate
12039 boot regions
12040
12041 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12042 Acked-by: Andy Fleming <afleming@freescale.com>
12043
12044commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
12045Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12046Date: Fri Jul 27 01:50:46 2007 -0500
12047
12048 e500 needs ppc_asm.tmp MCK_EXCEPTION
12049
12050 Always define MCK_EXCEPTION macro - so e500 can use it too.
12051
12052 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12053 Acked-by: Andy Fleming <afleming@freescale.com>
12054
Wolfgang Denk85eb5ca2007-08-14 09:47:27 +020012055commit 53a5c424bf8655b7b4e2c305a441963259a26a81
12056Author: David Updegraff <dave@cray.com>
12057Date: Mon Jun 11 10:41:07 2007 -0500
12058
12059 multicast tftp: RFC2090
12060
12061 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
12062 on Realtek RTL8139 and Freescale TSEC.
12063
12064 Signed-off-by: David Updegraff <dave@cray.com>
12065 Signed-off-by: Ben Warren <bwarren@qstreams.com>
12066
12067commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
12068Author: Wilson Callan <wcallan@savantav.com>
12069Date: Sat Jul 28 10:56:13 2007 -0400
12070
12071 New CONFIG_BOOTP_SERVERIP option
12072
12073 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
12074 from the bootp server
12075
12076 Signed-off-by: Wilson Callan <wcallan@savantav.com>
12077 Signed-off-by: Ben Warren <bwarren@qstreams.com>
12078
12079commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
12080Author: Mike Rapoport <mike@compulab.co.il>
12081Date: Sun Aug 12 08:48:27 2007 +0300
12082
12083 Add ability to take MAC address from the environment to DM9000 driver
12084
12085 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
12086 Signed-off-by: Ben Warren <bwarren@qstreams.com>
12087
12088commit be5d72d10d47609326226225181e301fb9a33b58
12089Author: Wolfgang Denk <wd@denx.de>
12090Date: Mon Aug 13 21:57:53 2007 +0200
12091
12092 Minor coding style cleanup. Update CHANGELOG.
12093
12094 Signed-off-by: Wolfgang Denk <wd@denx.de>
12095
12096commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
12097Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12098Date: Sat Aug 11 06:54:58 2007 -0500
12099
12100 Modify SBC8641D to use new Freescale PCI routines
12101
12102 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
12103 adapter.
12104
12105 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12106 Signde-off-by: Jon Loeliger <jdl@freescale.com>
12107
Wolfgang Denkbe5d72d2007-08-13 21:57:53 +020012108commit a08458303e7f9db67f296980036d3292c35cb45c
12109Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12110Date: Fri Jun 29 18:38:51 2007 +0200
12111
12112 atmel_mci: Fix data timeout value
12113
12114 Calculate the data timeout based on values from the CSD instead of
12115 just using a hardcoded DTOR value. This is a backport of a similar fix
12116 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
12117 instead of down.
12118
12119 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12120
12121commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
12122Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12123Date: Mon Aug 13 17:22:31 2007 +0200
12124
12125 AVR32: Include <div64.h> instead of <asm/div64.h>
12126
12127 include/asm-avr32/div64.h was recently moved to include/div64.h, but
12128 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
12129 the patch was merged perhaps?)
12130
12131 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
12132 compiles again.
12133
12134 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12135
12136commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
12137Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12138Date: Wed Jun 27 13:34:26 2007 +0200
12139
12140 atmel_mci: Use 512 byte blocksize if possible
12141
12142 Instead of always using the largest blocksize the card supports, check
12143 if it can support smaller block sizes and use 512 bytes if possible.
12144 Most cards do support this, and other parts of u-boot seem to have
12145 trouble with block sizes different from 512 bytes.
12146
12147 Also enable underrun/overrun protection.
12148
12149 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12150 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
12151
Wolfgang Denka5a38f42007-08-16 11:51:04 +020012152commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
12153Author: Stefan Roese <sr@denx.de>
12154Date: Mon Aug 13 09:05:33 2007 +0200
12155
12156 ppc4xx: Fix problem in PLL clock calculation
12157
12158 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
12159 and fixes a bug in the PLL clock calculation.
12160
12161 Signed-off-by: Stefan Roese <sr@denx.de>
12162
Wolfgang Denkbe5d72d2007-08-13 21:57:53 +020012163commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
12164Author: Wolfgang Denk <wd@denx.de>
12165Date: Sun Aug 12 21:34:50 2007 +0200
12166
12167 Update CHANGELOG
12168
Wolfgang Denk9986bc32007-08-12 21:34:50 +020012169commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
12170Author: Wolfgang Denk <wd@denx.de>
12171Date: Sun Aug 12 21:34:34 2007 +0200
12172
12173 Minor alignment of output, 2nd try.
12174 Also update CHANGELOG
12175
12176 Signed-off-by: Wolfgang Denk <wd@denx.de>
12177
12178commit 6b309f22a724fad8418e811751a0741b893419cf
12179Author: Wolfgang Denk <wd@denx.de>
12180Date: Sun Aug 12 20:35:49 2007 +0200
12181
12182 Minor alignment of output
12183
12184 Signed-off-by: Wolfgang Denk <wd@denx.de>
12185
12186commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
12187Author: Wolfgang Denk <wd@denx.de>
12188Date: Sun Aug 12 18:28:18 2007 +0200
12189
12190 Cleanup output on ADS5121 board
12191
12192 Signed-off-by: Wolfgang Denk
12193
12194commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
12195Author: Wolfgang Denk <wd@denx.de>
12196Date: Sun Aug 12 15:11:38 2007 +0200
12197
12198 Adapt board configuration and fix kernel crash on MCC200 board.
12199
12200 The update procedure was modified to turn off the USB subsystem
12201 before exit for MCC200 and TRAB. This is necessary as otherwise the
12202 USB controller continues to write periodically to system memory!
12203
12204 MCC200-specific notes:
12205 - the patch disables the magic key check for MCC200
12206 - the patch contains the configuration changes made
12207 for the new revision of the board.
12208
12209 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12210 Signed-off-by: Wolfgang Denk <wd@denx.de>
12211
12212commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
12213Author: Wolfgang Denk <wd@denx.de>
12214Date: Sun Aug 12 14:47:54 2007 +0200
12215
12216 Adjust default configuration of ADS5121 board.
12217
12218 Signed-off-by: Wolfgang Denk <wd@denx.de>
12219
12220commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
12221Author: Wolfgang Denk <wd@denx.de>
12222Date: Sun Aug 12 14:27:39 2007 +0200
12223
12224 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
12225
12226 Signed-off-by: Wolfgang Denk <wd@denx.de>
12227
12228commit 5fe6be6208dda852c3564e384bd78d75784dea3e
12229Author: Gerald Van Baren <vanbaren@cideas.com>
12230Date: Tue Aug 7 21:14:22 2007 -0400
12231
12232 Improve error print messages.
12233
12234 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12235
12236commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
12237Author: Kim Phillips <kim.phillips@freescale.com>
12238Date: Tue Jul 17 13:57:04 2007 -0500
12239
12240 fdt: allow for builds that don't want env and bd_t nodes
12241
12242 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
12243 area.
12244
12245 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12246
12247commit 91148bf7aeba142d6f348805db7625db7da64d6f
12248Author: Kim Phillips <kim.phillips@freescale.com>
12249Date: Tue Jul 17 13:56:53 2007 -0500
12250
12251 fdt: do board setup based on fdt address specified on bootm line
12252
12253 The last fdt patch to bootm did board setup based on the address
12254 specified by a prior fdt address command invocation. The bootm
12255 code, as its call to fdt_chosen does, should use the fdt specified
12256 by the user on the bootm command. Note this restores full
12257 functionality for the 8360's existing default boot environment
12258 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
12259 before booting a kernel).
12260
12261 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12262
12263commit e125a2ffc209dd34794e326c7175658253beadf3
12264Author: Gerald Van Baren <vanbaren@cideas.com>
12265Date: Tue Jul 10 20:40:39 2007 -0400
12266
12267 Call ft_board_setup() from the bootm command.
12268
12269 In the patch titled "Create new fdt boardsetup command..." I removed the
12270 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
12271 to add a direct call back into cmd_bootm.c
12272
12273 This fixes the oversight by adding the direct call to the bootm command.
12274
12275 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12276
12277commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
12278Author: Gerald Van Baren <vanbaren@cideas.com>
12279Date: Mon Jun 25 23:25:28 2007 -0400
12280
12281 Create new fdt boardsetup command, fix bug parsing [] form of set values.
12282
12283 Previously ft_board_setup() was called by fdt_chosen() which was not
12284 really correctly structured. This splits ft_board_setup() out by creating
12285 a new fdt boardsetup command.
12286
12287 Fix a bug when parsing fdt set command values which have the square
12288 bracket form [00 11 22 33] - the length was updated incorrectly in when
12289 parsing that form.
12290
12291 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12292
12293commit 6f35ded9e85493595e0eb66a82b502a95326d049
12294Author: Gerald Van Baren <vanbaren@cideas.com>
12295Date: Mon Jun 25 20:55:58 2007 -0400
12296
12297 Tighten up the error messages.
12298
12299 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12300
12301commit c45874b05aae897a6c29d1a97d4bb708fca2756c
12302Author: Gerald Van Baren <vanbaren@cideas.com>
12303Date: Mon Jun 25 19:52:23 2007 -0400
12304
12305 Asthetic improvements: error messages and line lengths.
12306
12307 Tighten up the error messages, split overlength lines.
12308
12309 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12310
12311commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
12312Author: Gerald Van Baren <vanbaren@cideas.com>
12313Date: Fri May 25 22:08:57 2007 -0400
12314
12315 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
12316
12317 The fdt_chosen() function was adding/seting some properties ad-hoc
12318 improperly and duplicated (poorly) what was done in ft_board_setup()
12319
12320 Clean up long lines (setting properties, printing errors).
12321
12322 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12323
12324commit 06e19a07701c968f15d72c083b5872a1a11c7b01
12325Author: Gerald Van Baren <vanbaren@cideas.com>
12326Date: Mon May 21 23:27:16 2007 -0400
12327
12328 For fdt_find_node_by_path(), handle the root path properly.
12329
12330 Also removes the special case root path detection in cmd_fdt.c since it
12331 is no longer necessary.
12332
12333 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12334
12335commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
12336Author: Gerald Van Baren <vanbaren@cideas.com>
12337Date: Thu May 17 23:54:36 2007 -0400
12338
12339 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
12340
12341 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
12342 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12343
12344commit 1a861169bc3758f9de3aead62b058736c6891246
12345Author: Gerald Van Baren <vanbaren@cideas.com>
12346Date: Wed Jun 6 22:47:58 2007 -0400
12347
12348 Replace fdt_node_offset() with fdt_find_node_by_path().
12349
12350 The new name matches more closely the kernel's name, which is also
12351 a much better description.
12352
12353 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
12354 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12355
12356commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
12357Author: Gerald Van Baren <vanbaren@cideas.com>
12358Date: Wed May 16 22:39:59 2007 -0400
12359
12360 Fix cmd_fdt line lengths, refactor code.
12361
12362 Break lines that were greater than 80 characters in length.
12363 Move the fdt print and property parsing code to separate static functions
12364 to reduce coding clutter in the fdt_cmd handling body.
12365
12366 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12367
12368commit 25114033ab21788810c48ba4df103b649da1223b
12369Author: Gerald Van Baren <vanbaren@cideas.com>
12370Date: Sat May 12 09:47:25 2007 -0400
12371
12372 FDT command improvements.
12373
12374 Fix "fdt set" so that it will create a non-existing property.
12375 Add "fdt mknode" to create nodes.
12376
12377 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12378
12379commit 38eb508e8e811e2e57628f445de3a24a23c7d804
12380Author: Gerald Van Baren <vanbaren@cideas.com>
12381Date: Sat May 12 09:45:46 2007 -0400
12382
12383 Reorganize and fix problems (returns) in the bootm command.
12384
12385 Do *NOT* return after the "point of no return" has been passed.
12386 If something goes wrong, the board must be reset after that point.
12387 Move the "Transferring control to Linux" debug message back to where it
12388 belongs: just before transferring control to linux.
12389
12390 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12391
12392commit 89c8757d8f213c47709bdc4efe0695263a6080a6
12393Author: Gerald Van Baren <vanbaren@cideas.com>
12394Date: Tue May 8 21:27:35 2007 -0400
12395
12396 Fix bugs in the CONFIG_OF_LIBFDT
12397
12398 Stupid coding mistakes (identified by Timur Tabi, thanks).
12399
12400 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12401
12402commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
12403Author: Gerald Van Baren <vanbaren@cideas.com>
12404Date: Wed Apr 25 22:47:15 2007 -0400
12405
12406 Improve fdt move length handling.
12407
12408 Make the length parameter optional: if not specified, do the move using
12409 the current size unchanged.
12410
12411 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12412
12413commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
12414Author: Gerald Van Baren <vanbaren@cideas.com>
12415Date: Wed Apr 25 22:23:36 2007 -0400
12416
12417 Minor code clean up.
12418
12419 Declare the variable fdt properly as extern.
12420 Call the "set_fn" function pointer the "short way" without the full
12421 dereferencing syntax.
12422
12423 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12424
12425commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
12426Author: Gerald Van Baren <vanbaren@cideas.com>
12427Date: Wed Apr 25 21:24:27 2007 -0400
12428
12429 Improve error messages, more informative.
12430
12431 Print more than the raw libfdt error message strings. This is especially
12432 useful for cluing in the user when the bootm command aborts due to
12433 blob problems.
12434
12435 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12436
12437commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
12438Author: Gerald Van Baren <vanbaren@cideas.com>
12439Date: Fri Apr 20 22:46:53 2007 -0400
12440
12441 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
12442
12443 This is the way u-boot reduces configured-out code. At Wolfgang
12444 Grandegger and Wolfgang Denk's request, make libfdt conform.
12445
12446 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12447
12448commit 923efd286411ed052d9e074f59f8986d6081061c
12449Author: Bruce Adler <bruce.adler@ccpu.com>
12450Date: Fri Aug 10 14:54:47 2007 -0700
12451
12452 add image size and descriptors for Spartan 3E FPGA chips
12453
12454 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
12455
12456 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
12457
12458commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
12459Author: Kim Phillips <kim.phillips@freescale.com>
12460Date: Fri Aug 10 15:34:48 2007 -0500
12461
12462 make MAKEALL more immune to merge conflicts
12463
12464 ..by placing board entries one per line, as suggested by jdl.
12465
12466 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12467
12468commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
12469Author: Kim Phillips <kim.phillips@freescale.com>
12470Date: Fri Aug 10 13:28:25 2007 -0500
12471
12472 README: Remove outdated cpu type, board type, and NAME_config lists
12473
12474 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12475
12476commit 49bb59912d21aacb507eb81fd21fb7af650c706c
12477Author: Dave Liu <r63238@freescale.com>
12478Date: Fri Aug 10 15:48:59 2007 +0800
12479
12480 mpc83xx: Suppress the warning 'burstlen'
12481
12482 suppress the warning 'burstlen' of spd_sdram.
12483
12484 Signed-off-by: Dave Liu <daveliu@freescale.com>
12485
Wolfgang Denk85eb5ca2007-08-14 09:47:27 +020012486commit c646bba6465a45c60746d4cc1602cd06c1960f2d
12487Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12488Date: Thu Aug 9 15:11:03 2007 -0500
12489
12490 Add support for SBC8641D. Config files.
12491
12492 Add support for Wind River's SBC8641D reference board.
12493
12494 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12495 Acked-by: Wolfgang Denk <wd@denx.de>
12496 Acked-by: Jon Loeliger <jdl@freescale.com>
12497
12498commit 8ac273271d57321f90505c7a51cdb1ef2113b628
12499Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12500Date: Thu Aug 9 15:10:53 2007 -0500
12501
12502 Add support for SBC8641D. Board files.
12503
12504 Add support for Wind River's SBC8641D reference board.
12505
12506 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12507 Acked-by: Wolfgang Denk <wd@denx.de>
12508 Acked-by: Jon Loeliger <jdl@freescale.com>
12509
Wolfgang Denk9986bc32007-08-12 21:34:50 +020012510commit c2c0ab4aff86622b837a48a0e560351f9afafb95
12511Author: Stefan Roese <sr@denx.de>
12512Date: Fri Aug 10 20:34:58 2007 +0200
12513
12514 Conding style cleanup
12515
12516 Signed-off-by: Stefan Roese <sr@denx.de>
12517
12518commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
12519Author: Sergey Kubushyn <ksi@koi8.net>
12520Date: Fri Aug 10 20:26:18 2007 +0200
12521
12522 [ARM] TI DaVinci support, hopefully final
12523
12524 Add support for the following DaVinci boards:
12525 - DV_EVM
12526 - SCHMOOGIE
12527 - SONATA
12528
12529 Changes:
12530
12531 - Split into separate board directories
12532 - Removed changes to MTD_DEBUG (or whatever it's called)
12533 - New CONFIG_CMD party line followed
12534 - Some cosmetic fixes, cleanup etc.
12535 - Patches against the latest U-Boot tree as of now.
12536 - Fixed CONFIG_CMD_NET in net files.
12537 - Fixed CONFIG_CMD_EEPROM for schmoogie.
12538 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
12539 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
12540 but it at least compiles.
12541
12542 Here is an excerpt from session log on SCHMOOGIE...
12543
12544 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
12545
12546 DRAM: 128 MB
12547 NAND: 128 MiB
12548 In: serial
12549 Out: serial
12550 Err: serial
12551 ARM Clock : 297MHz
12552 DDR Clock : 162MHz
12553 ETH PHY : DP83848 @ 0x01
12554 U-Boot > iprobe
12555 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
12556 U-Boot > ping 192.168.253.10
12557 host 192.168.253.10 is alive
12558 U-Boot >
12559
12560 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
12561 Acked-by: Dirk Behme <dirk.behme@gmail.com>
12562 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
12563 Acked-by: Stefan Roese <sr@denx.de>
12564
Wolfgang Denk85eb5ca2007-08-14 09:47:27 +020012565commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
12566Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12567Date: Fri Jul 27 01:50:45 2007 -0500
12568
12569 fsl_pci_init cleanup.
12570
12571 Do not enable normal errors created during probe (master abort, perr,
12572 and pcie Invalid Configuration access).
12573
12574 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
12575
12576 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12577 Acked-by: Andy Fleming <afleming@freescale.com>
12578
12579commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
12580Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12581Date: Fri Jul 27 01:50:44 2007 -0500
12582
12583 pciauto_setup_device bars_num fix
12584
12585 Passing bars_num=0 to pciauto_setup_device should assign no bars.
12586
12587 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12588 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
12589 Acked-by: Andy Fleming <afleming@freescale.com>
12590
12591commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
12592Author: Jon Loeliger <jdl@freescale.com>
12593Date: Mon Aug 6 17:39:44 2007 -0500
12594
12595 8641hpcn: Do correct sized pointer math.
12596
12597 When I rebased Ed's patch and cleaned up a few compilation
12598 problems, I apparently rebased my brain on crack first.
12599 Fix that by doing (char *) sized pointer math as needed.
12600
12601 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12602
12603commit cfc7a7f5bb3273c9951173c788001d45118f141f
12604Author: Jon Loeliger <jdl@freescale.com>
12605Date: Thu Aug 2 14:42:20 2007 -0500
12606
12607 cpu/86xx fixes.
12608
12609 Remove rev 1 fixes.
12610 Always set PICGCR_MODE.
12611 Enable machine check and provide board config option
12612 to set and handle SoC error interrupts.
12613
12614 Include MSSSR0 in error message.
12615
12616 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
12617
12618 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12620
Wolfgang Denka5a38f42007-08-16 11:51:04 +020012621commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
12622Author: Stefan Roese <sr@denx.de>
12623Date: Fri Aug 10 10:42:25 2007 +0200
12624
12625 Coding style cleanup
12626
12627 Signed-off-by: Stefan Roese <sr@denx.de>
12628
Wolfgang Denk9986bc32007-08-12 21:34:50 +020012629commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
12630Author: Dirk Behme <dirk.behme@googlemail.com>
12631Date: Thu Aug 2 17:42:08 2007 +0200
12632
12633 Make use of generic 64bit division in nand_util.c
12634
12635 Use generic 64bit division in nand_util.c. This makes nand_util.c
12636 independent of any toolchain 64bit division.
12637
12638 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
12639
12640commit f7c086e94e8ce9aad7268af97f73aa6884686f27
12641Author: Dirk Behme <dirk.behme@googlemail.com>
12642Date: Thu Aug 2 17:41:14 2007 +0200
12643
12644 Move 64bit division from avr32 to generic lib
12645
12646 Move the 64bit division from lib_avr32 to lib_generic. With this, all
12647 boards can do_div/__div64_32 if needed, not only avr one. Code is put
12648 to lib_generic, so no larger memory footprint if not used. No code
12649 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
12650
12651 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
12652
Wolfgang Denka5a38f42007-08-16 11:51:04 +020012653commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
12654Author: Niklaus Giger <niklausgiger@gmx.ch>
12655Date: Fri Jul 27 11:31:22 2007 +0200
12656
12657 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
12658
12659 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12660
12661commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
12662Author: Niklaus Giger <niklausgiger@gmx.ch>
12663Date: Fri Jul 27 11:30:33 2007 +0200
12664
12665 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
12666
12667 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12668
12669commit e8397fc78c9394d71de233a4d810fbc9047e4c76
12670Author: Niklaus Giger <niklausgiger@gmx.ch>
12671Date: Fri Jul 27 11:38:26 2007 +0200
12672
12673 Add PPC4xx-HCU4 and HCU5 boards: common files
12674
12675 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12676
12677commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
12678Author: Niklaus Giger <niklausgiger@gmx.ch>
12679Date: Fri Jul 27 11:28:44 2007 +0200
12680
12681 Add PPC4xx-HCU4 and HCU5 boards: make related
12682
12683 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12684
12685commit 137fdd9f474ecb853efdace5200576308c67f18d
12686Author: Niklaus Giger <niklausgiger@gmx.ch>
12687Date: Fri Jul 27 11:28:03 2007 +0200
12688
12689 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
12690
12691 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12692
12693commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
12694Author: Niklaus Giger <niklausgiger@gmx.ch>
12695Date: Fri Jul 27 11:27:15 2007 +0200
12696
12697 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
12698
12699 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12700
12701commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
12702Author: Niklaus Giger <niklausgiger@gmx.ch>
12703Date: Fri Jul 27 11:25:31 2007 +0200
12704
12705 Add PPC4xx-HCU4 and HCU5 boards: READMEs
12706
12707 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12708
12709commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
12710Author: Niklaus Giger <niklausgiger@gmx.ch>
12711Date: Fri Jul 27 11:37:40 2007 +0200
12712
12713 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
12714
12715 This series of patches adds support for 2 boards from Netstal Maschinen.
12716
12717 The HCU4 has a PPC405Gpr and
12718 the HCU5 has a PPC440EPX.
12719
12720 The HCU4 has a somehow complicated flash setup, as the booteprom is
12721 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
12722 elegant solution.
12723
12724 The HCU5 has only a booteprom as the whole code will be downloaded from a
12725 different board which has HD, CD-ROM, etc and where all code is stored.
12726
12727 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
12728 Thanks them a lot.
12729
12730 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12731
12732commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
12733Author: Stefan Roese <sr@denx.de>
12734Date: Fri Aug 10 08:42:55 2007 +0200
12735
12736 ppc4xx: Update lwmon5 POST configuration
12737
12738 Signed-off-by: Stefan Roese <sr@denx.de>
12739
12740commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
12741Author: Yuri Tikhonov <yur@emcraft.com>
12742Date: Fri Aug 10 08:25:22 2007 +0200
12743
12744 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
12745
12746 The patch adds support for UART POST on ppc44x-based boards with no
12747 external serial clocks installed.
12748
12749 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12750 Acked-by: Stefan Roese <sr@denx.de>
12751
Wolfgang Denk9986bc32007-08-12 21:34:50 +020012752commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
12753Author: Kim Phillips <kim.phillips@freescale.com>
12754Date: Mon Aug 6 18:18:34 2007 -0500
12755
12756 mpc83xx: fix ITX[GP] O=builddir builds
12757
12758 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
12759
12760 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
12761 "BUILD_DIR=<some dir> ./MAKEALL ..."
12762
12763 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12764
12765commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
12766Author: Dave Liu <r63238@freescale.com>
12767Date: Wed Aug 1 15:00:59 2007 +0800
12768
12769 mpc83xx: Correct the README for DDR ECC
12770
12771 Update the README for DDR ECC, change the name
12772 to README.mpc83xx.ddrecc.
12773
12774 Signed-off-by: Dave Liu <daveliu@freescale.com>
12775 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12776
12777commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
12778Author: Dave Liu <r63238@freescale.com>
12779Date: Wed Aug 1 15:00:15 2007 +0800
12780
12781 mpc83xx: Consolidate the ECC support of 83xx
12782
12783 Remove the duplicated source code of ecc command on the <board>.c,
12784 for reused, move these code to cpu/mpc83xx directory.
12785
12786 Signed-off-by: Dave Liu <daveliu@freescale.com>
12787 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12788
12789commit 036575c544cf1b69654d8fb334bda69c6ff3da36
12790Author: Dave Liu <r63238@freescale.com>
12791Date: Sat Aug 4 13:37:39 2007 +0800
12792
12793 mpc83xx: Correct the burst length for DDR2 with 32 bits
12794
12795 The burst length should be 4 for DDR2 with 32 bits bus
12796
12797 Signed-off-by: Dave Liu <daveliu@freescale.com>
12798
12799commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
12800Author: Kim Phillips <kim.phillips@freescale.com>
12801Date: Wed Jul 25 19:25:33 2007 -0500
12802
12803 mpc83xx: add support for the MPC8323E RDB
12804
12805 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
12806 five 10/100 ethernet ports connected via an ICPlus IP175C
12807 switch, one PCI slot, and serial. Features not supported
12808 in this patch are SD card interface, 2 USB ports, and the
12809 two phone ports.
12810
12811 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
12812 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12813
12814commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
12815Author: Kim Phillips <kim.phillips@freescale.com>
12816Date: Wed Jul 25 19:25:28 2007 -0500
12817
12818 mpc83xx: fixup generic pci for libfdt
12819
12820 add libfdt support to the generic 83xx pci code
12821
12822 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12823
12824commit f57ac7a7b37109245b69db80839ebee26179966a
12825Author: Kim Phillips <kim.phillips@freescale.com>
12826Date: Wed Jul 25 19:25:22 2007 -0500
12827
12828 mpc83xx: fix 8360 and cpu functions to update fdt being passed
12829
12830 ..and not the global fdt. Rename local fdt vars to blob so as not to
12831 be confused with the global var with the same three-letter name.
12832
12833 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12834
12835commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
12836Author: Jerry Van Baren <gvb.uboot@gmail.com>
12837Date: Wed Jul 4 21:34:24 2007 -0400
12838
12839 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
12840
12841 Several node strings were not correct (trailing slashes and properties
12842 in the strings)
12843 Added setting of the timebase-frequency.
12844 Improved error messages and use debug() instead of printf().
12845
12846 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12847 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12848
12849commit 26d02c9bbac1751c5e19294f000100b48d43a920
12850Author: Jerry Van Baren <gvb.uboot@gmail.com>
12851Date: Wed Jul 4 21:27:30 2007 -0400
12852
12853 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
12854
12855 The new name matches more closely the kernel's name, which is also
12856 a much better description.
12857
12858 These are the mpc83xx changes made necessary by the function name change.
12859
12860 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
12861 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12862 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12863
12864commit 9be39a67c9f8fef7107f5df09d673005f04d0963
12865Author: Dave Liu <daveliu@freescale.com>
12866Date: Mon Jun 25 10:41:56 2007 +0800
12867
12868 mpc83xx: Add support for the display of reset status
12869
12870 83xx processor family has many reset sources, such as
12871 power on reset, software hard reset, software soft reset,
12872 JTAG, bus monitor, software watchdog, check stop reset,
12873 external hard reset, external software reset.
12874 sometimes, to figure out the fault of system, we need to
12875 know the cause of reset early before the prompt of
12876 u-boot present.
12877
12878 Signed-off-by: Dave Liu <daveliu@freescale.com>
12879 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12880
12881commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
12882Author: Dave Liu <daveliu@freescale.com>
12883Date: Mon Jun 25 10:41:04 2007 +0800
12884
12885 mpc83xx: Fix the align bug of SDMA buffer
12886
12887 According to the latest user manual, the SDMA temporary
12888 buffer base address must be 4KB aligned.
12889
12890 Signed-off-by: Dave Liu <daveliu@freescale.com>
12891 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12892
12893commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
12894Author: Dave Liu <daveliu@freescale.com>
12895Date: Mon Jun 25 13:21:12 2007 +0800
12896
12897 mpc83xx: Revise the MPC8360EMDS readme doc
12898
12899 When the rev2.x silicon mount on the MPC8360EMDS baord,
12900 and if you are using the u-boot version after the commit
12901 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
12902 to make the ethernet interface usable, we have to setup
12903 the jumpers correctly.
12904
12905 Signed-off-by: Dave Liu <daveliu@freescale.com>
12906 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12907
12908commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
12909Author: Timur Tabi <timur@freescale.com>
12910Date: Tue Jul 3 13:46:32 2007 -0500
12911
12912 FSL I2C driver programs the two I2C busses differently
12913
12914 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
12915 The second I2C bus has its slave address programmed incorrectly and is
12916 missing a 5-us delay.
12917
12918 Signed-off-by: Timur Tabi <timur@freescale.com>
12919 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12920
12921commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
12922Author: Timur Tabi <timur@freescale.com>
12923Date: Tue Jul 3 13:04:34 2007 -0500
12924
12925 Update SCCR programming in cpu_init_f() to support all 83xx processors
12926
12927 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
12928 bitfields for all 83xx processors. The code to update some bitfields was
12929 compiled only on some processors. Now, the bitfields are programmed as long
12930 as the corresponding CFG_SCCR option is defined in the board header file.
12931 This means that the board header file should not define any CFG_SCCR macros
12932 for bitfields that don't exist on that processor, otherwise the SCCR will be
12933 programmed incorrectly.
12934
12935 Signed-off-by: Timur Tabi <timur@freescale.com>
12936 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12937
12938commit 9546266999f0b9b51372636614211b88d90f0f25
12939Author: Martin Krause <martin.krause@tqs.de>
12940Date: Fri Jun 22 13:04:22 2007 +0200
12941
12942 TQM834x: cleanup configuraton
12943
12944 Remove irritating #undef DEBUG
12945
12946 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12947 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12948
12949commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
12950Author: david.saada <David.Saada@ecitele.com>
12951Date: Mon Jun 18 09:09:53 2007 -0700
12952
12953 MPC83xx: Fix makefile to generate config.h file in the build directory
12954
12955 MPC83xx: Fix the Makefile config sections to generate the include/config.h
12956 file in the build directory instead of the source directory.
12957
12958 Signed-off-by: David Saada <david.saada@ecitele.com>
12959 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12960
12961commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
12962Author: Lee Nipper <Lee.Nipper@freescale.com>
12963Date: Thu Jun 14 20:07:33 2007 -0500
12964
12965 mpc83xx: Add support for 8360 silicon revision 2.1
12966
12967 This change adds 8360 silicon revision 2.1 support to u-boot.
12968
12969 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
12970 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12971
12972commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
12973Author: Kumar Gala <galak@kernel.crashing.org>
12974Date: Wed Aug 8 04:14:28 2007 -0500
12975
12976 Treat ppc64 host as ppc
12977
12978 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12979
12980commit 0dc4279b08ff82472bec2e2c90858602459febe8
12981Author: Jason Jin <Jason.jin@freescale.com>
12982Date: Wed Aug 8 09:01:46 2007 +0800
12983
12984 Minor fix for bios emulator makefile
12985
12986 Add $(obj) to LIB avoiding objects be built in the source dir
12987
12988 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12989
12990commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
12991Author: Jason Jin <Jason.jin@freescale.com>
12992Date: Wed Aug 8 08:33:11 2007 +0800
12993
12994 Add CONFIG_BIOSEMU define to guard all the bios emulator code
12995
12996 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12997
12998 This patch fix the compile issue on the board that did not enable the bios emulator
12999
13000commit ed8106433522f2ea8933e9808346860d061d7731
13001Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
13002Date: Tue Jul 31 12:27:25 2007 -0500
13003
13004 tsec: fix multiple PHY support
13005
13006 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
13007 broke multiple PHY support in tsec.c. This fixes it.
13008
13009 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
13010 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13011
13012commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
13013Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
13014Date: Thu Aug 9 09:08:18 2007 -0500
13015
13016 tsec: Allow Ten Bit Interface address to be configurable
13017
13018 Allow the address of the Ten Bit Interface (TBI) to be changed in the
13019 event of a conflict with another device.
13020
13021 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
13022
Wolfgang Denk05675732007-08-18 22:00:38 +020013023commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
13024Author: Stefan Roese <sr@denx.de>
13025Date: Wed Aug 8 09:54:26 2007 +0200
13026
13027 Coding style cleanup
13028
13029 Signed-off-by: Stefan Roese <sr@denx.de>
13030
13031commit a41de1f0d373e09c782dea558385a06247111ba5
13032Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13033Date: Sun Aug 5 05:15:18 2007 -0500
13034
13035 Port enabled for I2C signals and chipselects port configuration.
13036
13037 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13038
13039commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
13040Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13041Date: Sun Aug 5 04:31:18 2007 -0500
13042
13043 Added NAND support
13044
13045 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13046
13047commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
13048Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13049Date: Sun Aug 5 04:11:20 2007 -0500
13050
13051 Added I2C support
13052
13053 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13054
13055commit 99c03c175d2689093176facf17c58ce2cb320001
13056Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13057Date: Sun Aug 5 03:58:52 2007 -0500
13058
13059 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
13060
13061 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13062
13063commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
13064Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13065Date: Sun Aug 5 03:55:21 2007 -0500
13066
13067 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
13068
13069 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13070
13071commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
13072Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13073Date: Sun Aug 5 03:43:30 2007 -0500
13074
13075 Moved sync() from board file to include/asm-m68k/io.h
13076
13077 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13078
13079commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
13080Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13081Date: Sun Aug 5 03:30:44 2007 -0500
13082
13083 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
13084
13085 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13086
13087commit 9998bd37ead85e93953559720710d3b0685c81e6
13088Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13089Date: Sun Aug 5 03:19:10 2007 -0500
13090
13091 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
13092
13093 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13094
Wolfgang Denk9986bc32007-08-12 21:34:50 +020013095commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
13096Author: Jason Jin <Jason.jin@freescale.com>
13097Date: Tue Aug 7 16:17:06 2007 +0800
13098
13099 Add CONFIG_BIOSEMU define to guard all the bios emulator code
13100
13101 This patch fix the compile issue on the board that did not enable the bios emulator
13102
13103commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
13104Author: Wolfgang Denk <wd@denx.de>
13105Date: Tue Aug 7 16:02:13 2007 +0200
13106
13107 Fix missing brace error in fs/fat/fat.c
13108 [pointed out by Roderik Wildenburg]
13109
13110 Signed-off-by: Wolfgang Denk <wd@denx.de>
13111
Wolfgang Denk63640012007-10-14 00:13:19 +020013112commit 706714d97a0d08d59eda4de2268c39f504688329
13113Author: Michal Simek <monstr@monstr.eu>
13114Date: Mon Aug 6 23:41:53 2007 +0200
13115
13116 [FIX] remove cute code
13117
13118commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
13119Author: Michal Simek <monstr@monstr.eu>
13120Date: Mon Aug 6 23:35:26 2007 +0200
13121
13122 [FIX] Fix romfs code
13123
13124commit ab4b956d3143f8f8174089053f5dfabbb04762b0
13125Author: Michal Simek <monstr@monstr.eu>
13126Date: Mon Aug 6 23:31:49 2007 +0200
13127
13128 [FIX] Coding style cleanup - Wolfgang's suggestions
13129
Wolfgang Denk9986bc32007-08-12 21:34:50 +020013130commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
13131Author: Wolfgang Denk <wd@denx.de>
13132Date: Mon Aug 6 23:21:05 2007 +0200
13133
13134 Fixed typo in README (pointed out by Martin Jost).
13135
13136 Signed-off-by: Wolfgang Denk <wd@denx.de>
13137
Wolfgang Denka5a38f42007-08-16 11:51:04 +020013138commit 537223afa61f64480df31ce440a9cb386df4a814
13139Author: Stefan Roese <sr@denx.de>
13140Date: Mon Aug 6 21:10:17 2007 +0200
13141
13142 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
13143
13144 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
13145 here an updated Bamboo README.
13146
13147 Signed-off-by: Stefan Roese <sr@denx.de>
13148
Wolfgang Denk9986bc32007-08-12 21:34:50 +020013149commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
13150Author: Wolfgang Denk <wd@denx.de>
13151Date: Mon Aug 6 02:17:36 2007 +0200
13152
13153 Coding style cleanup. Update CHANGELOG.
13154
13155 Signed-off-by: Wolfgang Denk <wd@denx.de>
13156
13157commit 221838cc7eb178370ff62aa05920a582e12ac322
13158Author: Jason Jin <Jason.jin@freescale.com>
13159Date: Tue Jul 10 09:03:22 2007 +0800
13160
13161 Remove the bios emulator from MAI board.
13162
13163 The bios emulator in the MAI board can not pass compile
13164 and have a lot of crap in it. remove it and will have a
13165 clean and small bios emulator in the drivers directory
13166 which can be uesed for every board.
13167
13168 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13169
13170commit 5618332409bb96f4448d1712899369fc80c0b489
13171Author: Jason Jin <Jason.jin@freescale.com>
13172Date: Fri Jul 13 12:14:59 2007 +0800
13173
13174 Fix some compile issues for MAI board.
13175
13176 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13177
13178commit 0f460a1ee148b648ee242c3157650287d4296260
13179Author: Jason Jin <Jason.jin@freescale.com>
13180Date: Fri Jul 13 12:14:58 2007 +0800
13181
13182 Configurations for ATI video card BIOS emulator
13183
13184 This patch add definition of the BIOS emulator and the ATI framebuffer
13185 driver for MPC8641HPCN board.
13186
13187 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13188 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13189
13190commit ece92f85053b8df613edcf05b26a416cbc3d629c
13191Author: Jason Jin <Jason.jin@freescale.com>
13192Date: Fri Jul 6 08:34:56 2007 +0800
13193
13194 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
13195 ATI video card BIOS. and can be used for x86 code emulation by some
13196 modifications.
13197
13198 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13199
13200commit 5072188acabde3178fac7f5a597150e6e74fd40c
13201Author: Jason Jin <Jason.jin@freescale.com>
13202Date: Fri Jul 6 08:33:33 2007 +0800
13203
13204 This is a framebuffer driver for ATI video card, can work for PCI9200,
13205 X300, X700, X800 ATI video cards.
13206
13207 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13208 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13209
Wolfgang Denk9c7e4b02007-08-06 02:17:36 +020013210commit 5728be389e65fd47f34b33c2596271eb4db751ae
13211Author: Wolfgang Denk <wd@denx.de>
13212Date: Mon Aug 6 01:01:49 2007 +0200
13213
13214 Coding style cleanup. Update CHANGELOG.
13215
13216 Signed-off-by: Wolfgang Denk <wd@denx.de>
13217
Wolfgang Denk5728be32007-08-06 01:01:49 +020013218commit 8092fef4c29b395958bb649647da7e3775731517
13219Author: Martin Krause <Martin.Krause@tqs.de>
13220Date: Tue Dec 12 14:26:01 2006 +0100
13221
13222 Add functions to list of exported functions
13223
13224 Additionally export the following fuctions (to make trab_config build again):
13225 - simple_strtol()
13226 - strcmp()
13227
13228 Also bump the ABI version to reflect this change
13229
13230 Signed-off-by: Martin Krause <martin.krause@tqs.de>
13231
13232commit 63cec5814fab5d2b1c86982327433807a5ac0249
13233Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13234Date: Thu Aug 2 14:09:49 2007 -0500
13235
13236 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
13237
13238 All of the PCI/PCI-Express driver and initialization code that
13239 was in the MPC8641HPCN port has now been moved into the common
13240 drivers/fsl_pci_init.c. In a subsequent patch, this will be
13241 utilized by the 85xx ports as well.
13242
13243 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
13244
13245 Also enable the second PCI-Express controller on 8641
13246 by getting its BATS and CFG_ setup right.
13247
13248 Fixed a u16 vendor compiler warning in AHCI driver too.
13249
13250 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13251 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13252 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13253
Wolfgang Denk63640012007-10-14 00:13:19 +020013254commit a274ca4f6d68830e7c916f897561cff8c4101c38
13255Author: Michal Simek <monstr@monstr.eu>
13256Date: Sun Aug 5 22:33:05 2007 +0200
13257
13258 [FIX] Coding style cleanup
13259
13260commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
13261Author: Michal Simek <monstr@monstr.eu>
13262Date: Sun Aug 5 16:13:31 2007 +0200
13263
13264 [FIX] Xilinx Uartlite driver
13265 Because PPC405 can use UARTLITE serial interface and
13266 Microblaze can use Uart16550 serial interface not only Uartlite.
13267
13268commit 98889edd50aadf862071eb5664747ad0d568a20e
13269Author: Michal Simek <monstr@monstr.eu>
13270Date: Sun Aug 5 15:54:53 2007 +0200
13271
13272 [FIX] Change configuration for XUPV2P Microblaze board
13273
13274commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
13275Author: Michal Simek <monstr@monstr.eu>
13276Date: Sun Aug 5 15:53:50 2007 +0200
13277
13278 [PATCH] Added support for Xilinx Emac community driver
13279
Wolfgang Denk9986bc32007-08-12 21:34:50 +020013280commit 86b116b1b1e165ca4840daefed36d2e3b8460173
13281Author: Bartlomiej Sieka <tur@semihalf.com>
13282Date: Fri Aug 3 12:08:16 2007 +0200
13283
13284 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
13285
13286 Add the ability for modules from the Schindler cm5200 family to use a
13287 single U-Boot image:
13288 - rename cm1_qp1 to cm5200
13289 - add run-time module detection
13290 - parametrize SDRAM configuration according to the module we are running on
13291
13292 Few minor, board-specific fixes included in this patch:
13293 - better MAC address handling
13294 - updated default environment ('update' command uses +{filesize} now)
13295 - improved error messages in the auto-update code
13296 - allow booting U-Boot from RAM (CFG_RAMBOOT)
13297
13298 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
13299 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
13300 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13301
Wolfgang Denk5728be32007-08-06 01:01:49 +020013302commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
13303Author: Andy Fleming <afleming@freescale.com>
13304Date: Fri Aug 3 04:05:25 2007 -0500
13305
13306 Add Marvell 1149 PHY support to the TSEC
13307
Wolfgang Denkf2c2a932007-08-06 01:11:08 +020013308commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
Wolfgang Denk5728be32007-08-06 01:01:49 +020013309Author: Wolfgang Denk <wd@denx.de>
Wolfgang Denkf2c2a932007-08-06 01:11:08 +020013310Date: Thu Aug 2 21:27:46 2007 +0200
Wolfgang Denk5728be32007-08-06 01:01:49 +020013311
Wolfgang Denkf2c2a932007-08-06 01:11:08 +020013312 Coding style cleanup, update CHANGELOG
Wolfgang Denk5728be32007-08-06 01:01:49 +020013313
13314 Signed-off-by: Wolfgang Denk <wd@denx.de>
13315
Wolfgang Denk5728be32007-08-06 01:01:49 +020013316commit 63e22764d2f8653f68888c667eb65b3996b52680
13317Author: Wolfgang Denk <wd@denx.de>
13318Date: Thu Aug 2 10:11:18 2007 +0200
13319
13320 Minor cleanup of <board>_nand build rules.
13321
Wolfgang Denka5a38f42007-08-16 11:51:04 +020013322commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
13323Author: Stefan Roese <sr@denx.de>
13324Date: Thu Aug 2 08:33:56 2007 +0200
13325
13326 ppc4xx: Code cleanup
13327
13328 Signed-off-by: Stefan Roese <sr@denx.de>
13329
13330commit c92409812206ac67a7fa7aae298539a9c3804a46
13331Author: Grzegorz Bernacki <gjb@semihalf.com>
13332Date: Tue Jul 31 18:51:48 2007 +0200
13333
13334 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
13335
13336 During config transactions on the PCIe bus an attempt to scan for a
13337 non-existent device can lead to a machine check exception with certain
13338 peripheral devices. In order to avoid crashing in such scenarios the
13339 instrumented versions of the config cycle read routines are introduced, so
13340 the exceptions fixups framework can gracefully recover.
13341
13342 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
13343 Acked-by: Rafal Jaworowski <raj@semihalf.com>
13344
13345commit dec99558b9ea75a37940d07f41a3565a50b54ad1
13346Author: Rafal Jaworowski <raj@semihalf.com>
13347Date: Tue Jul 31 18:19:54 2007 +0200
13348
13349 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
13350
13351 This brings back separate settings for PCIe bus numbers depending on chip
13352 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
13353 commit. 440SPe rev. A does NOT work properly with the same settings as for
13354 the rev. B (no devices are seen on the bus during enumeration).
13355
13356 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13357
Wolfgang Denk5728be32007-08-06 01:01:49 +020013358commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
13359Author: Wolfgang Denk <wd@denx.de>
13360Date: Thu Aug 2 00:48:45 2007 +0200
13361
13362 Fix build errors and warnings / code cleanup.
13363
13364 Signed-off-by: Wolfgang Denk <wd@denx.de>
13365
Wolfgang Denka5a38f42007-08-16 11:51:04 +020013366commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
13367Author: Eugene OBrien <eugene.obrien@advantechamt.com>
13368Date: Tue Jul 31 10:24:56 2007 +0200
13369
13370 ppc4xx: Update AMCC Bamboo 440EP support
13371
13372 Changed storage type of cfg_simulate_spd_eeprom to const
13373 Changed storage type of gpio_tab to stack storage
13374 (Cannot access global data declarations in .bss until afer code relocation)
13375
13376 Improved SDRAM tests to catch problems where data is not uniquely addressable
13377 (e.g. incorrectly programmed SDRAM row or columns)
13378
13379 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
13380 Fixed AM29LV320DT (OpCode Flash) sector map
13381
13382 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
13383 Signed-off-by: Stefan Roese <sr@denx.de>
13384
13385commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
13386Author: Stefan Roese <sr@denx.de>
13387Date: Tue Jul 31 08:37:01 2007 +0200
13388
13389 ppc4xx: Update 440EPx lwmon5 board support
13390
13391 - Clear ECC status regs after ECC POST test
13392 - Set dcbz for ECC generation with caches enabled as default
13393 - Code cleanup
13394
13395 Signed-off-by: Stefan Roese <sr@denx.de>
13396
13397commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
13398Author: Stefan Roese <sr@denx.de>
13399Date: Mon Jul 30 11:04:57 2007 +0200
13400
13401 ppc4xx: Only print ECC related info when the error bis are set
13402
13403 Signed-off-by: Stefan Roese <sr@denx.de>
13404
13405commit e36220a4baf1f188ba60f17e9d0f043069b1362a
13406Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13407Date: Fri Jul 27 16:44:31 2007 +0200
13408
13409 new FPGA image for PLU405 board
13410
13411 new FPGA image for PLU405 board with improved CompactFlash timing
13412
13413 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13414
Wolfgang Denkb1b54e32007-08-02 21:27:46 +020013415commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
13416Author: Rafal Jaworowski <raj@semihalf.com>
13417Date: Fri Jul 27 14:43:59 2007 +0200
13418
13419 [ADS5121] Support for the ADS5121 board
13420
13421 The following MPC5121e subsystems are supported:
13422
13423 - low-level CPU init
13424 - NOR Boot Flash (common CFI driver)
13425 - DDR SDRAM
13426 - FEC
13427 - I2C
13428 - Watchdog
13429
13430 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
13431 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13432 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
13433
13434commit 1863cfb7b100ba0ee3401799457a01dc058745f8
13435Author: Rafal Jaworowski <raj@semihalf.com>
13436Date: Fri Jul 27 14:22:04 2007 +0200
13437
13438 [PPC] Remove unused MSR_USER definition
13439
13440 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13441
Wolfgang Denka5a38f42007-08-16 11:51:04 +020013442commit d4024bb72dd81695ec099b2199eda0d27c623e62
13443Author: John Otken <john@softadvances.com>
13444Date: Thu Jul 26 17:49:11 2007 +0200
13445
13446 ppc4xx: Add support for AMCC 405EP Taihu board
13447
13448 Signed-off-by: John Otken <john@softadvances.com>
13449
13450commit b66091de6c7390620312c2501db23d8391e7cabb
13451Author: Anatolij Gustschin <agust@denx.de>
13452Date: Thu Jul 26 15:08:01 2007 +0200
13453
13454 ppc4xx: lwmon5: Update Lime initialization
13455
13456 Change Lime SDRAM initialization to now support 100MHz and
13457 133MHz (if enabled). Also the framebuffer is initialized to
13458 display a blue rectangle with a white border.
13459
13460 Signed-off-by: Anatolij Gustschin <agust@denx.de>
13461 Signed-off-by: Stefan Roese <sr@denx.de>
13462
13463commit 9f24a808f17fc0f37b7fb4805f734741335caecc
13464Author: Stefan Roese <sr@denx.de>
13465Date: Tue Jul 24 09:52:52 2007 +0200
13466
13467 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
13468
13469 The used Intel NOR FLASH chips have internally two dies, and are now
13470 treated as two seperate chips.
13471
13472 Signed-off-by: Stefan Roese <sr@denx.de>
13473
13474commit aedf5bde179ecfbd0a96130d18996a96518b785f
13475Author: Stefan Roese <sr@denx.de>
13476Date: Tue Jul 24 07:20:09 2007 +0200
13477
13478 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
13479
13480 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
13481 interrupt controller.
13482
13483 Signed-off-by: Stefan Roese <sr@denx.de>
13484
13485commit a71d96eac8130b53a91f93cd10c70fca0db18d52
13486Author: Stefan Roese <sr@denx.de>
13487Date: Fri Jul 20 15:03:44 2007 +0200
13488
13489 ppc4xx: Fix bug with default GPIO output value
13490
13491 As spotted by Matthias Fuchs, the default output values for all GPIO1
13492 outputs were not setup correctly. This patch fixes this issue.
13493
13494 Signed-off-by: Stefan Roese <sr@denx.de>
13495
13496commit 531e3e8b831f357056448fa573137d5fb37000fd
13497Author: Pavel Kolesnikov <concord@emcraft.com>
13498Date: Fri Jul 20 15:03:03 2007 +0200
13499
13500 POST: Add ECC POST for the lwmon5 board
13501
13502 This patch adds ECC Post test for the Lwmon5 board based
13503 on PPC440EPx to U-Boot.
13504
13505 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
13506 Acked-by: Yuri Tikhonov <yur@emcraft.com>
13507 Acked-by: Stefan Roese <sr@denx.de>
13508
Wolfgang Denkb1b54e32007-08-02 21:27:46 +020013509commit cc3023b9f95d7ac959a764471a65001062aecf41
13510Author: Rafal Jaworowski <raj@semihalf.com>
13511Date: Thu Jul 19 17:12:28 2007 +0200
13512
13513 Fix breakage of 8xx boards from recent commit.
13514
13515 This patch fixes the negative consequences for 8xx of the recent
13516 "ppc4xx: Clean up 440 exceptions handling" commit.
13517
13518 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13519
Wolfgang Denk05675732007-08-18 22:00:38 +020013520commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
13521Author: Stefan Roese <sr@denx.de>
13522Date: Mon Jul 16 13:11:12 2007 +0200
13523
13524 Coding style cleanup
13525
13526 Signed-off-by: Stefan Roese <sr@denx.de>
13527
Wolfgang Denka5a38f42007-08-16 11:51:04 +020013528commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
13529Author: Stefan Roese <sr@denx.de>
13530Date: Mon Jul 16 10:02:12 2007 +0200
13531
13532 ppc4xx: Code cleanup
13533
13534 Signed-off-by: Stefan Roese <sr@denx.de>
13535
13536commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
13537Author: Stefan Roese <sr@denx.de>
13538Date: Mon Jul 16 10:01:38 2007 +0200
13539
13540 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
13541
13542 Signed-off-by: Stefan Roese <sr@denx.de>
13543
13544commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
13545Author: Stefan Roese <sr@denx.de>
13546Date: Mon Jul 16 10:00:43 2007 +0200
13547
13548 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
13549
13550 The new boardspecific DDR2 controller configuration is used for the Yucca
13551 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
13552
13553 Signed-off-by: Stefan Roese <sr@denx.de>
13554
13555commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
13556Author: Stefan Roese <sr@denx.de>
13557Date: Mon Jul 16 09:57:00 2007 +0200
13558
13559 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
13560
13561 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
13562 support non default, boardspecific DDR(2) controller configuration.
13563
13564 Signed-off-by: Stefan Roese <sr@denx.de>
13565
13566commit 5743a9207a370b90f09b20ebd61167c806b937f3
13567Author: Stefan Roese <sr@denx.de>
13568Date: Mon Jul 16 08:53:51 2007 +0200
13569
13570 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
13571
13572 The new function remove_tlb() can be used to remove the TLB's used to
13573 map a specific memory region. This is especially useful for the DDR(2)
13574 setup routines which configure the SDRAM area temporarily as a cached
13575 area (for speedup on auto-calibration and ECC generation) and later
13576 need this area uncached for normal usage.
13577
13578 Signed-off-by: Stefan Roese <sr@denx.de>
13579
Wolfgang Denk63640012007-10-14 00:13:19 +020013580commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
13581Author: Michal Simek <monstr@monstr.eu>
13582Date: Mon Jul 16 00:31:07 2007 +0200
13583
13584 [PATCH] Support for Xilinx EmacLite controller
13585
Wolfgang Denkb1b54e32007-08-02 21:27:46 +020013586commit 3a6cab844cf74f76639d795e0be8717e02c86af7
13587Author: Wolfgang Denk <wd@denx.de>
13588Date: Sat Jul 14 22:51:02 2007 +0200
13589
13590 Update CHANGELOG
13591
13592 Signed-off-by: Wolfgang Denk <wd@denx.de>
13593
Wolfgang Denk63640012007-10-14 00:13:19 +020013594commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
13595Author: Michal Simek <monstr@monstr.eu>
13596Date: Sat Jul 14 13:11:28 2007 +0200
13597
13598 [FIX] support for simply measuring time
13599
13600commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
13601Author: Michal Simek <monstr@monstr.eu>
13602Date: Sat Jul 14 12:41:23 2007 +0200
13603
13604 [FS] Added support for ROMFS
13605
Wolfgang Denk3a6cab82007-07-14 22:51:02 +020013606commit 011595307731a7a67a7445d107c279d031e8ab97
13607Author: Heiko Schocher <hs@pollux.denx.de>
13608Date: Sat Jul 14 01:06:58 2007 +0200
13609
13610 [PCS440EP] - fix compile error, if BUILD_DIR is used
13611
Wolfgang Denk63640012007-10-14 00:13:19 +020013612commit 5a2f1098d81ad58b309e5e558d0492643166a799
13613Author: Michal Simek <monstr@monstr.eu>
13614Date: Sat Jul 14 00:18:48 2007 +0200
13615
13616 [PATCH] Support time without timer
13617
13618commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
13619Author: Michal Simek <monstr@monstr.eu>
13620Date: Fri Jul 13 21:43:55 2007 +0200
13621
13622 [PATCH] Remove problem with disabled BARREL SHIFTER
13623
13624commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
13625Author: Michal Simek <monstr@monstr.eu>
13626Date: Fri Jul 13 21:41:44 2007 +0200
13627
13628 [FIX] correct help for rspr
13629
Wolfgang Denk3a6cab82007-07-14 22:51:02 +020013630commit fad63407154f46246ce80d53a9c669a44362ac67
13631Author: Heiko Schocher <hs@pollux.denx.de>
13632Date: Fri Jul 13 09:54:17 2007 +0200
13633
13634 make show_boot_progress () weak.
13635
13636 Signed-off-by: Heiko Schocher <hs@denx.de>
13637
13638commit 907902472391b6ca1876ec300687562ecaf459b1
13639Author: Heiko Schocher <hs@pollux.denx.de>
13640Date: Fri Jul 13 08:26:05 2007 +0200
13641
13642 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
13643 - fix compile error, if BUILD_DIR is used
13644
13645 Signed-off-by: Heiko Schocher <hs@denx.de>
13646
Wolfgang Denka5a38f42007-08-16 11:51:04 +020013647commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
13648Author: Stefan Roese <sr@denx.de>
13649Date: Thu Jul 12 16:32:08 2007 +0200
13650
13651 ppc4xx: Change receive buffer handling in the 4xx emac driver
13652
13653 This change fixes a bug in the receive buffer handling, that
13654 could lead to problems upon high network traffic (broadcasts...).
13655
13656 Signed-off-by: Stefan Roese <sr@denx.de>
13657
Wolfgang Denk3a6cab82007-07-14 22:51:02 +020013658commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
13659Author: Wolfgang Denk <wd@denx.de>
13660Date: Thu Jul 12 01:45:34 2007 +0200
13661
13662 Update CHANGELOG, minor coding style cleanup.
13663
13664 Signed-off-by: Wolfgang Denk <wd@denx.de>
13665
Wolfgang Denk5728be32007-08-06 01:01:49 +020013666commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
13667Author: Andy Fleming <afleming@freescale.com>
13668Date: Fri Jun 8 16:41:18 2007 -0500
13669
13670 Remove erroneous errata code from Marvel 88E1111S driver
13671
13672 The Marvel 88E1111S driver for the TSEC was copied from the
13673 88E1101 driver, and included a fix for an erratum which does not
Wolfgang Denkec06b272007-08-06 15:59:45 +020013674 exist on that part. Now it is removed
Wolfgang Denk5728be32007-08-06 01:01:49 +020013675
13676 Signed-off-by: Andy Fleming <afleming@freescale.com>
13677
13678commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
13679Author: Andy Fleming <afleming@freescale.com>
13680Date: Tue Jun 5 16:38:44 2007 -0500
13681
13682 From: eran liberty <eran.liberty@gmail.com>
13683
13684 adds the reset register to 85xx immap
13685
13686 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
13687 Signed-off-by: Andy Fleming <afleming@freescale.com>
13688
13689commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
13690Author: Andy Fleming <afleming@freescale.com>
13691Date: Thu May 10 17:50:01 2007 -0500
13692
13693 Polished the 85xx ADS config files
13694
13695 Made the boot commands use device trees by default.
13696 Also moved the ramdisk to 1000000 (I think the previous address
13697 was getting overridden during boot).
13698
13699 Signed-off-by: Andy Fleming <afleming@freescale.com>
13700
13701commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
13702Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13703Date: Wed May 9 11:03:32 2007 -0500
13704
13705 8544ds: Fix Makefile after moving pixis to board/freescale.
13706
13707 The OBJTREE != SRCTREE build scenario was broken.
13708 This fixes it.
13709
13710 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13711 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13712
13713commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
13714Author: Andy Fleming <afleming@freescale.com>
13715Date: Wed May 9 00:54:20 2007 -0500
13716
13717 tsec: Fix PHY code to match first driver
13718
13719 Jarrold Wen noticed that the generic PHY code always matches
13720 under the current implementation. Change it so the first match
13721 wins, and *only* unknown PHYs trigger the generic driver
13722
13723 Signed-off-by: Andy Fleming <afleming@freescale.com>
13724
13725commit ccc091aac61a38cd998d575d92f7232e256d6312
13726Author: Andy Fleming <afleming@freescale.com>
13727Date: Tue May 8 17:27:43 2007 -0500
13728
13729 Add support for CPM device tree configuration to 8560 ADS
13730
13731 * Adds code to modify CPM frequencies
13732 * Cleans up the config file to #define TSEC and (for now) #undef FCC
13733 * Adds the MII command for all 8560 ADS configurations
13734 * Updates config file to provide convenience commands for booting
13735 with a device tree
13736
13737 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
13738 Signed-off-by: Andy Fleming <afleming@freescale.com>
13739
13740commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
13741Author: Andy Fleming <afleming@freescale.com>
13742Date: Tue May 8 17:23:02 2007 -0500
13743
13744 Fix Marvell 88e1145 PHY init code
13745
13746 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
13747 where the reset was being done after the errata code instead of
13748 before.
13749
13750 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
13751 Signed-off-by: Andy Fleming <afleming@freescale.com>
13752
13753commit 5dc210dec5bace98a50b6ba905347890091a9bb0
13754Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13755Date: Wed Jul 11 14:52:16 2007 -0500
13756
13757 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
13758
13759 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13760
13761commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
13762Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13763Date: Wed Jul 11 14:52:08 2007 -0500
13764
13765 pciauto setup bridge
13766
13767 The P2P bridge bus numbers programmed into the device are relative to
13768 hose->first_busno.
13769
13770 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13771
13772commit 571f49fa717004ca4268b4e24057efc7bf9f987b
13773Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13774Date: Wed Jul 11 14:52:01 2007 -0500
13775
13776 Support PCIe extended config registers
13777
13778 FSL PCIe block has extended cfg registers in the 100 and 400 range.
13779 For example, to read the LTSSM register: pci display <busn>.0 404 1
13780
13781 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13782
13783commit ba5feb12581bb2912ce301e4866b71f846e9fc07
13784Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13785Date: Wed Jul 11 14:51:48 2007 -0500
13786
13787 Minor improvements to drivers/pci_auto.c
13788
13789 - Make pciauto_{pre,post}scan_setup_bridge non-static
13790 - Added physical address display in debug messages.
13791
13792 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13793
13794commit 40e81addab7bb74d20ddf681ce9babc880a828ee
13795Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13796Date: Wed Jul 11 14:51:35 2007 -0500
13797
13798 Start pci hose scan from hose->current_busno.
13799
13800 Ensure hose->current_busno is not less than first_busno. This fixes
13801 broken board code which leaves current_busno=0 when first_busno is
13802 greater than 0 for the cases with multiple controllers.
13803
13804 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13805
13806commit 3865b1fb7843a08ad49a6319a36415752276ff48
13807Author: Stefan Roese <sr@denx.de>
13808Date: Wed Jul 11 12:13:53 2007 +0200
13809
13810 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
13811
13812 Signed-off-by: Stefan Roese <sr@denx.de>
13813
Wolfgang Denk239f05e2007-07-12 01:45:34 +020013814commit fa1df308926a6f70e3504c57514ef27ac31fd13a
13815Author: Bartlomiej Sieka <tur@semihalf.com>
13816Date: Wed Jul 11 20:11:07 2007 +0200
13817
13818 CM1.QP1: Support for the Schindler CM1.QP1 board.
13819
13820 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
13821 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13822
13823commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
13824Author: Heiko Schocher <hs@pollux.denx.de>
13825Date: Wed Jul 11 18:39:11 2007 +0200
13826
13827 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
13828 - now the Flash ST M29W040B is supported (not tested)
13829 - fix the "led" command
13830 - fix compile error, if BUILD_DIR is used
13831
13832 Signed-off-by: Heiko Schocher <hs@denx.de>
13833
Wolfgang Denk5728be32007-08-06 01:01:49 +020013834commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
13835Author: Stefan Roese <sr@denx.de>
13836Date: Sun Jul 8 13:44:27 2007 +0200
13837
13838 Fix malloc problem introduced with the relocation fixup for the PPC platform
13839
13840 The relocation fixup didn't handle the malloc pointer initialization
13841 correctly. This patch fixes this problem. Tested successfully on 4xx.
13842 The relocation fixup patches for 4xx will follow soon.
13843
13844 Signed-off-by: Stefan Roese <sr@denx.de>
13845
Wolfgang Denk05675732007-08-18 22:00:38 +020013846commit 0dca874db62718e41253659e60f3a1de7eb418ce
13847Author: TsiChung <tcliew@Goku.(none)>
13848Date: Tue Jul 10 15:45:43 2007 -0500
13849
13850 Cache update and added CFG_UNIFY_CACHE
13851
13852 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
13853
13854 Signed-off-by: TsiChung <tcliew@Goku.(none)>
13855
13856commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
13857Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13858Date: Thu Jul 5 23:36:16 2007 -0500
13859
13860 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
13861
13862 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
13863
13864 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13865
13866commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
13867Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13868Date: Thu Jul 5 23:31:25 2007 -0500
13869
13870 Update header files
13871
13872 Include immap.h and renamed mcfrtc.h to rtc.h
13873
13874 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13875
13876commit 2870e98ac8e5553e9187b12a47e5f46babb53990
13877Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13878Date: Thu Jul 5 23:29:21 2007 -0500
13879
13880 Add mcffec_initialize()
13881
13882 Added mcffec_initialize() in eth_initialize()
13883
13884 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13885
13886commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
13887Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13888Date: Thu Jul 5 23:27:40 2007 -0500
13889
13890 Update header file and clean up
13891
13892 Include immap.h
13893
13894 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13895
13896commit 0cee9c66318602c856a899ae5fa7579ccba6443a
13897Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13898Date: Thu Jul 5 23:23:15 2007 -0500
13899
13900 New uart structure and defines
13901
13902 Seperated from mcfuart.h
13903
13904 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13905
13906commit a90e79de8d99e9c9d69d60bfff9f24c337165900
13907Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13908Date: Thu Jul 5 23:22:31 2007 -0500
13909
13910 New timer structure and defines
13911
13912 Seperated from mcftimer.h
13913
13914 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13915
13916commit e04acb2eba4782489417240eff76e20e176aec10
13917Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13918Date: Thu Jul 5 23:21:09 2007 -0500
13919
13920 Rename mcfrtc to rtc
13921
13922 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
13923
13924 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13925
13926commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
13927Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13928Date: Thu Jul 5 23:17:36 2007 -0500
13929
13930 Rename mcfserial.c. Update include header
13931
13932 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
13933
13934 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13935
13936commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
13937Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13938Date: Thu Jul 5 23:13:58 2007 -0500
13939
13940 Header file update, clean up and cache handling
13941
13942 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
13943
13944 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13945
13946commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
13947Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13948Date: Thu Jul 5 23:10:40 2007 -0500
13949
13950 Create interrupts.c and modify Makefile
13951
13952 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
13953
13954 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13955
13956commit ddd104f1ed655eda50c06ba636237a83ed943f34
13957Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13958Date: Thu Jul 5 23:06:55 2007 -0500
13959
13960 Enable Icache
13961
13962 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13963
13964commit b9bf3de377b2bae70c983c9b97feae914999e735
13965Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13966Date: Thu Jul 5 23:05:31 2007 -0500
13967
13968 Update header file and some clean up
13969
13970 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
13971
13972 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13973
13974commit 84a015b52ec820a5ae173717d78516de731c89c2
13975Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13976Date: Thu Jul 5 23:03:28 2007 -0500
13977
13978 Update header file and enable icache
13979
13980 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
13981
13982 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13983
13984commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
13985Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13986Date: Thu Jul 5 23:01:22 2007 -0500
13987
13988 Update header file and removed interrupt_init()
13989
13990 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
13991
13992 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13993
13994commit 3b635492c95bd0d6e08f93f699821cba1f602a64
13995Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13996Date: Thu Jul 5 22:57:46 2007 -0500
13997
13998 Update for flash.o and mii.o
13999
14000 Removed flash.o and added mii.o
14001
14002 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14003
14004commit c5ded275d839e4ff79f41718d50a835d989f57bc
14005Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14006Date: Thu Jul 5 22:56:19 2007 -0500
14007
14008 MII functions calls.
14009
14010 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14011
14012commit 427c814104560e29bda14955c67703245aaaa5b4
14013Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14014Date: Thu Jul 5 22:54:42 2007 -0500
14015
14016 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
14017
14018 The removed MII routines will be placed in mii.c.
14019
14020 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14021
14022commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
14023Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14024Date: Thu Jul 5 22:51:05 2007 -0500
14025
14026 Duplicate code
14027
14028 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
14029
14030 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14031
14032commit 2744354a8437b8f78db178e30660215688bff570
14033Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14034Date: Thu Jul 5 22:46:38 2007 -0500
14035
14036 Seperate old structure defines and new structure defines
14037
14038 Removed new uart structure and defines to uart.h
14039
14040 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14041
14042commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
14043Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14044Date: Thu Jul 5 22:45:01 2007 -0500
14045
14046 Seperate old structure defines and new structure defines
14047
14048 New timer structure and defines will move to new timer.h
14049
14050 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14051
14052commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
14053Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14054Date: Thu Jul 5 22:42:23 2007 -0500
14055
14056 Clean up
14057
14058 Removed whitespace
14059
14060 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14061
14062commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
14063Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14064Date: Thu Jul 5 22:41:24 2007 -0500
14065
14066 Clean up
14067
14068 Replaced whitespace with tabs
14069
14070 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14071
14072commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
14073Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14074Date: Thu Jul 5 22:39:07 2007 -0500
14075
14076 Create new header file and move peripherals base address from configs file to new header file.
14077
14078 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
14079
14080 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14081
14082commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
14083Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14084Date: Thu Jul 5 22:24:58 2007 -0500
14085
14086 Revert file mode
14087
14088 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
14089
14090 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14091
Wolfgang Denk5728be32007-08-06 01:01:49 +020014092commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
14093Author: Jon Loeliger <jdl@freescale.com>
14094Date: Tue Jul 10 11:19:50 2007 -0500
14095
14096 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
14097
14098 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14099 Those always evaluated TRUE, and thus were always compiled
14100 even when IDE really wasn't defined/wanted.
14101
14102 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14103
14104commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
14105Author: Jon Loeliger <jdl@freescale.com>
14106Date: Tue Jul 10 11:13:21 2007 -0500
14107
14108 drivers/: Remove lingering references to CFG_CMD_* symbols.
14109
14110 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14111 Those always evaluated TRUE, and thus were always compiled
14112 even when IDE really wasn't defined/wanted.
14113
14114 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14115
14116commit f40a7f3e3888b42a43674b099e5470022c8c544c
14117Author: Jon Loeliger <jdl@freescale.com>
14118Date: Tue Jul 10 11:07:56 2007 -0500
14119
14120 fs/: Remove lingering references to CFG_CMD_* symbols.
14121
14122 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14123 Those always evaluated TRUE, and thus were always compiled
14124 even when IDE really wasn't defined/wanted.
14125
14126 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14127
14128commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
14129Author: Jon Loeliger <jdl@freescale.com>
14130Date: Tue Jul 10 11:05:02 2007 -0500
14131
14132 net/: Remove lingering references to CFG_CMD_* symbols.
14133
14134 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14135 Those always evaluated TRUE, and thus were always compiled
14136 even when IDE really wasn't defined/wanted.
14137
14138 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14139
14140commit 902531788376046da212afd1661cffb62f3daa1c
14141Author: Jon Loeliger <jdl@freescale.com>
14142Date: Tue Jul 10 11:02:44 2007 -0500
14143
14144 common/: Remove lingering references to CFG_CMD_* symbols.
14145
14146 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14147 Those always evaluated TRUE, and thus were always compiled
14148 even when IDE really wasn't defined/wanted.
14149
14150 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14151
14152commit d39b57415838c73fb0a37eca84de3c68ba990586
14153Author: Jon Loeliger <jdl@freescale.com>
14154Date: Tue Jul 10 10:48:22 2007 -0500
14155
14156 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
14157
14158 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14159 Those always evaluated TRUE, and thus were always compiled
14160 even when IDE really wasn't defined/wanted.
14161
14162 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14163
14164commit 77a318545d57aefa844752465b94c7e09a3f26d0
14165Author: Jon Loeliger <jdl@freescale.com>
14166Date: Tue Jul 10 10:39:10 2007 -0500
14167
14168 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
14169
14170 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14171 Those always evaluated TRUE, and thus were always compiled
14172 even when IDE really wasn't defined/wanted.
14173
14174 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14175
14176commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
14177Author: Jon Loeliger <jdl@freescale.com>
14178Date: Tue Jul 10 10:27:39 2007 -0500
14179
14180 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
14181
14182 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14183
14184commit 079a136c3588814784561d6e4856970ee82d6e2a
14185Author: Jon Loeliger <jdl@freescale.com>
14186Date: Tue Jul 10 10:12:10 2007 -0500
14187
14188 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
14189
14190 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14191 used to be included but CONFIG_BOOTP_MASK was not defined.
14192
14193 Remove lingering references to CFG_CMD_* symbols.
14194
14195 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14196
14197commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
14198Author: Jon Loeliger <jdl@freescale.com>
14199Date: Tue Jul 10 09:38:02 2007 -0500
14200
14201 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
14202
14203 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14204 used to be included but CONFIG_BOOTP_MASK was not defined.
14205
14206 Remove lingering references to CFG_CMD_* symbols.
14207
14208 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14209
14210commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
14211Author: Jon Loeliger <jdl@freescale.com>
14212Date: Tue Jul 10 09:29:01 2007 -0500
14213
14214 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
14215
14216 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14217 used to be included but CONFIG_BOOTP_MASK was not defined.
14218
14219 Remove lingering references to CFG_CMD_* symbols.
14220
14221 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14222
14223commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
14224Author: Jon Loeliger <jdl@freescale.com>
14225Date: Tue Jul 10 09:22:23 2007 -0500
14226
14227 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
14228
14229 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14230 used to be included but CONFIG_BOOTP_MASK was not defined.
14231
14232 Remove lingering references to CFG_CMD_* symbols.
14233
14234 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14235
14236commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
14237Author: Jon Loeliger <jdl@freescale.com>
14238Date: Tue Jul 10 09:10:49 2007 -0500
14239
14240 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
14241
14242 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14243 used to be included but CONFIG_BOOTP_MASK was not defined.
14244
14245 Remove lingering references to CFG_CMD_* symbols.
14246
14247 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14248
14249commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
14250Author: Jon Loeliger <jdl@freescale.com>
14251Date: Tue Jul 10 09:02:57 2007 -0500
14252
14253 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
14254
14255 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14256 used to be included but CONFIG_BOOTP_MASK was not defined.
14257
14258 Remove lingering references to CFG_CMD_* symbols.
14259
14260 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14261
14262commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
14263Author: Jon Loeliger <jdl@freescale.com>
14264Date: Mon Jul 9 22:08:34 2007 -0500
14265
14266 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
14267
14268 All of the choices for CONFIG_BOOTP_ are now documented in
14269 the README file. You must now individually select exactly
14270 the set that you want using a series of
14271 #define CONFIG_BOOTP_<x>
14272 statements in the board port config files now.
14273
14274 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14275
14276commit d3b8c1a743dcd31625c99e6a44590f207eb00028
14277Author: Jon Loeliger <jdl@freescale.com>
14278Date: Mon Jul 9 21:57:31 2007 -0500
14279
14280 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14281
14282 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14283
14284commit 2fd90ce575b02d189cbf443c85309bcd001aa393
14285Author: Jon Loeliger <jdl@freescale.com>
14286Date: Mon Jul 9 21:48:26 2007 -0500
14287
14288 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14289
14290 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14291
14292commit 37d4bb70586659dedef1658ce1bed071be098aec
14293Author: Jon Loeliger <jdl@freescale.com>
14294Date: Mon Jul 9 21:38:02 2007 -0500
14295
14296 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14297
14298 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14299
14300commit 18225e8dd1950bd6dbf35011e436db7f474c187d
14301Author: Jon Loeliger <jdl@freescale.com>
14302Date: Mon Jul 9 21:31:24 2007 -0500
14303
14304 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14305
14306 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14307
14308commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
14309Author: Jon Loeliger <jdl@freescale.com>
14310Date: Mon Jul 9 21:24:19 2007 -0500
14311
14312 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14313
14314 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14315
14316commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
14317Author: Jon Loeliger <jdl@freescale.com>
14318Date: Mon Jul 9 21:16:53 2007 -0500
14319
14320 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14321
14322 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14323
14324commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
14325Author: Jon Loeliger <jdl@freescale.com>
14326Date: Mon Jul 9 19:12:30 2007 -0500
14327
14328 Retire CONFIG_COMMANDS finally.
14329 Strip old CFG_CMD_* symbols out.
14330
14331 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14332
14333commit b5501f7d720fed99ab0b42c83f5dea52868ce007
14334Author: Jon Loeliger <jdl@freescale.com>
14335Date: Mon Jul 9 19:10:03 2007 -0500
14336
14337 Update README.* to reference new CONFIG_CMD_* names now.
14338
14339 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14340
14341commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
14342Author: Jon Loeliger <jdl@freescale.com>
14343Date: Mon Jul 9 19:06:00 2007 -0500
14344
14345 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
14346
14347 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14348
14349commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
14350Author: Jon Loeliger <jdl@freescale.com>
14351Date: Mon Jul 9 18:57:22 2007 -0500
14352
14353 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
14354
14355 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14356
14357commit ab3abcbabd840928fb1eb5122118ca466b5e5013
14358Author: Jon Loeliger <jdl@freescale.com>
14359Date: Mon Jul 9 18:45:16 2007 -0500
14360
14361 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
14362
14363 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14364
14365commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
14366Author: Jon Loeliger <jdl@freescale.com>
14367Date: Mon Jul 9 18:38:39 2007 -0500
14368
14369 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
14370
14371 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14372
14373commit c508a4cefd8a953fc64957650506a035e6e3d9d1
14374Author: Jon Loeliger <jdl@freescale.com>
14375Date: Mon Jul 9 18:31:28 2007 -0500
14376
14377 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
14378
14379 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14380
14381commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
14382Author: Jon Loeliger <jdl@freescale.com>
14383Date: Mon Jul 9 18:24:55 2007 -0500
14384
14385 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
14386
14387 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14388
14389commit fcec2eb93e126400009729328e797f12bc94f1fd
14390Author: Jon Loeliger <jdl@freescale.com>
14391Date: Mon Jul 9 18:19:09 2007 -0500
14392
14393 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
14394
14395 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14396
14397commit a593814f2be0c9cdc3133cd550b167b8a988328f
14398Author: Jon Loeliger <jdl@freescale.com>
14399Date: Mon Jul 9 18:10:50 2007 -0500
14400
14401 rtc/: Remove obsolete references to CONFIG_COMMANDS
14402
14403 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14404
14405commit 67350568f9d46e66c21829f3513b3db0caeb948b
14406Author: Jon Loeliger <jdl@freescale.com>
14407Date: Mon Jul 9 18:05:38 2007 -0500
14408
14409 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
14410
14411 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14412
14413commit 7def6b34f910f08d7ef0a14646da067719237ca2
14414Author: Jon Loeliger <jdl@freescale.com>
14415Date: Mon Jul 9 18:02:11 2007 -0500
14416
14417 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
14418
14419 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14420
14421commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
14422Author: Jon Loeliger <jdl@freescale.com>
14423Date: Mon Jul 9 17:56:50 2007 -0500
14424
14425 fs/: Remove obsolete references to CONFIG_COMMANDS
14426
14427 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14428
14429commit c91898bbc505aff3e12a807af88e76da18efb7ee
14430Author: Jon Loeliger <jdl@freescale.com>
14431Date: Mon Jul 9 17:46:09 2007 -0500
14432
14433 tools/: Remove obsolete references to CONFIG_COMMANDS
14434
14435 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14436
14437commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
14438Author: Jon Loeliger <jdl@freescale.com>
14439Date: Mon Jul 9 17:45:14 2007 -0500
14440
14441 net/: Remove obsolete references to CONFIG_COMMANDS
14442
14443 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14444
14445commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
14446Author: Jon Loeliger <jdl@freescale.com>
14447Date: Mon Jul 9 17:39:42 2007 -0500
14448
14449 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
14450
14451 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14452
14453commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
14454Author: Jon Loeliger <jdl@freescale.com>
14455Date: Mon Jul 9 17:30:01 2007 -0500
14456
14457 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
14458
14459 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14460
14461commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
14462Author: Jon Loeliger <jdl@freescale.com>
14463Date: Mon Jul 9 17:22:37 2007 -0500
14464
14465 disk/: Remove obsolete references to CONFIG_COMMANDS
14466
14467 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14468
14469commit 639221c76c88215bd55af83ad174fc30d1940f8f
14470Author: Jon Loeliger <jdl@freescale.com>
14471Date: Mon Jul 9 17:15:49 2007 -0500
14472
14473 include/: Remove obsolete references to CONFIG_COMMANDS
14474 Mostly removed from comments here.
14475
14476 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14477
Wolfgang Denk239f05e2007-07-12 01:45:34 +020014478commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
14479Author: Wolfgang Denk <wd@denx.de>
14480Date: Tue Jul 10 00:01:28 2007 +0200
14481
14482 Coding style cleanup; update CHANGELOG.
14483
14484 Signed-off-by: Wolfgang Denk <wd@denx.de>
14485
Wolfgang Denka5a38f42007-08-16 11:51:04 +020014486commit c8603cfbd4573379a6076c9c208545ba2bbf019a
14487Author: Stefan Roese <sr@denx.de>
14488Date: Mon Jul 9 11:00:24 2007 +0200
14489
14490 Small coding style cleanup
14491
14492 Signed-off-by: Stefan Roese <sr@denx.de>
14493
14494commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
14495Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14496Date: Mon Jul 9 10:10:08 2007 +0200
14497
14498 Migrate esd 405EP boards to new NAND subsystem
14499
14500 Remove unused CFG_NAND_LEGACY define
14501
14502 These boards to not have NAND.
14503
14504 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14505
14506commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
14507Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14508Date: Mon Jul 9 10:10:06 2007 +0200
14509
14510 Migrate esd 405EP boards to new NAND subsystem
14511
14512 Migrate esd 405EP boards to new NAND subsystem
14513
14514 -cleanup
14515 -use correct io accessors (in/out_be32())
14516
14517 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14518
14519commit e09f7ab5749c345f924da272bea0521a73af5b11
14520Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14521Date: Mon Jul 9 10:10:04 2007 +0200
14522
14523 Migrate esd 405EP boards to new NAND subsystem
14524
14525 This patch prepares the migration from the legacy NAND driver
14526 to U-Boot's new NAND subsystem for esd boards.
14527
14528 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14529
Wolfgang Denk5728be32007-08-06 01:01:49 +020014530commit c3517f919d0f61650cf3027fd4faf0f631142f6c
14531Author: Jon Loeliger <jdl@freescale.com>
14532Date: Sun Jul 8 18:10:08 2007 -0500
14533
14534 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
14535
14536 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14537
14538commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
14539Author: Jon Loeliger <jdl@freescale.com>
14540Date: Sun Jul 8 18:05:39 2007 -0500
14541
14542 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
14543
14544 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14545
14546commit c76fe47425afc7d5d670ff0539823c85d65d9c42
14547Author: Jon Loeliger <jdl@freescale.com>
14548Date: Sun Jul 8 18:02:23 2007 -0500
14549
14550 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
14551
14552 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14553
14554commit baa26db4113679b80970ff447d91cc10217742a6
14555Author: Jon Loeliger <jdl@freescale.com>
14556Date: Sun Jul 8 17:51:39 2007 -0500
14557
14558 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
14559
14560 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14561
14562commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
14563Author: Jon Loeliger <jdl@freescale.com>
14564Date: Sun Jul 8 17:02:01 2007 -0500
14565
14566 Clear up confusion over the CMD_POST and POST_DIAG mess.
14567
14568 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
14569 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
14570 Clear this mess up some.
14571
14572 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14573
14574commit b3631487105a57ab7cbadfc26efbaf9676275018
14575Author: Jon Loeliger <jdl@freescale.com>
14576Date: Sun Jul 8 15:45:08 2007 -0500
14577
14578 Remove references to the old cmd_confdefs.h include file.
14579
14580 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14581
14582commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
14583Author: Jon Loeliger <jdl@freescale.com>
14584Date: Sun Jul 8 15:42:59 2007 -0500
14585
14586 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
14587
14588 Use new CONFIG_CMD_* in lwmon5.h board config file.
14589 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
14590
14591 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14592
14593commit a5562901661bd428f7e5feb333f796372cb81019
14594Author: Jon Loeliger <jdl@freescale.com>
14595Date: Sun Jul 8 15:31:57 2007 -0500
14596
14597 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
14598
14599 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14600
14601commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
14602Author: Jon Loeliger <jdl@freescale.com>
14603Date: Sun Jul 8 15:02:44 2007 -0500
14604
14605 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
14606
14607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14608
14609commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
14610Author: Jon Loeliger <jdl@freescale.com>
14611Date: Sun Jul 8 15:12:40 2007 -0500
14612
14613 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
14614
14615 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14616
14617commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
14618Author: Jon Loeliger <jdl@freescale.com>
14619Date: Sun Jul 8 14:55:07 2007 -0500
14620
14621 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
14622
14623 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14624
14625commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
14626Author: Jon Loeliger <jdl@freescale.com>
14627Date: Sun Jul 8 14:49:44 2007 -0500
14628
14629 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
14630
14631 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14632
14633commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
14634Author: Jon Loeliger <jdl@freescale.com>
14635Date: Sun Jul 8 14:21:43 2007 -0500
14636
14637 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
14638
14639 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14640
14641commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
14642Author: Jon Loeliger <jdl@freescale.com>
14643Date: Sun Jul 8 14:14:17 2007 -0500
14644
14645 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
14646
14647 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14648
14649commit 348f258f24253433e4a2302a0bbceb6740a67246
14650Author: Jon Loeliger <jdl@freescale.com>
14651Date: Sun Jul 8 13:46:18 2007 -0500
14652
14653 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
14654
14655 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14656
14657commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
14658Author: Jon Loeliger <jdl@freescale.com>
14659Date: Sun Jul 8 10:09:35 2007 -0500
14660
14661 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
14662
14663 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14664
14665commit 60a0876b5106b34220e459c208bbf648073306c0
14666Author: Jon Loeliger <jdl@freescale.com>
14667Date: Sat Jul 7 21:04:26 2007 -0500
14668
14669 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
14670
14671 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14672
14673commit dcaa71562826a2466e894c868d132509dcda8444
14674Author: Jon Loeliger <jdl@freescale.com>
14675Date: Sat Jul 7 20:56:05 2007 -0500
14676
14677 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
14678
14679 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14680
14681commit 3c3227f3c737502311b25b72084573901cbbf17d
14682Author: Jon Loeliger <jdl@freescale.com>
14683Date: Sat Jul 7 20:40:43 2007 -0500
14684
14685 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
14686
14687 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14688
14689commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
14690Author: Jon Loeliger <jdl@freescale.com>
14691Date: Thu Jul 5 19:52:35 2007 -0500
14692
14693 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
14694
14695 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14696
14697commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
14698Author: Jon Loeliger <jdl@freescale.com>
14699Date: Thu Jul 5 19:32:07 2007 -0500
14700
14701 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
14702
14703 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14704
14705commit 498ff9a228485bd4b9f23d066bada268f9add1dd
14706Author: Jon Loeliger <jdl@freescale.com>
14707Date: Thu Jul 5 19:13:52 2007 -0500
14708
14709 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
14710
14711 Since ADS860.h includes "board/fads/fads.h" with ramifications
14712 on the CONFIG_COMMAND treatment, it too has to be adjusted to
14713 exclude already configured commands in this same commit.
14714
14715 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14716
Wolfgang Denka5a38f42007-08-16 11:51:04 +020014717commit 10e038932f22ee80ebd53de312531e70e6590a2f
14718Author: Thomas Knobloch <knobloch@siemens.com>
14719Date: Fri Jul 6 14:58:39 2007 +0200
14720
14721 [NAND] Bad block skipping for command nboot
14722
14723 The old implementation of command nboot does not support reading the image from
14724 NAND flash with skipping of bad blocks. The patch implements a new version of
14725 the nboot command: by calling nboot.jffs2 from the u-boot command line the
14726 command will load the image from NAND flash with respect to bad blocks (by using
14727 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
14728 read.jffs2 ...".
14729
14730 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
14731 Signed-off-by: Stefan Roese <sr@denx.de>
14732
14733commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
14734Author: Stefan Roese <sr@denx.de>
14735Date: Fri Jul 6 12:26:51 2007 +0200
14736
14737 ppc4xx: Update lwmon5 default environment
14738
14739 Signed-off-by: Stefan Roese <sr@denx.de>
14740
14741commit 5d187430a055d62f17ca84d75e7245439d1f7e75
14742Author: Stefan Roese <sr@denx.de>
14743Date: Fri Jul 6 11:48:24 2007 +0200
14744
14745 ppc4xx: Update lwmon5 board
14746
14747 Add unlock=yes environment variable to default variables to unlock
14748 the CFI flash by default.
14749
14750 Signed-off-by: Stefan Roese <sr@denx.de>
14751
Wolfgang Denk5728be32007-08-06 01:01:49 +020014752commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
14753Author: Stefan Roese <sr@denx.de>
14754Date: Fri Jul 6 09:45:47 2007 +0200
14755
14756 Fix problem with get/setdcr commands introduced by cfg patches
14757
14758 Signed-off-by: Stefan Roese <sr@denx.de>
14759
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020014760commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
14761Author: Wolfgang Denk <wd@denx.de>
14762Date: Fri Jul 6 02:50:19 2007 +0200
14763
14764 Code cleanup and default config update for STC GP3 SSA board.
14765
14766 Signed-off-by: Wolfgang Denk <wd@denx.de>
14767
Wolfgang Denk5728be32007-08-06 01:01:49 +020014768commit e4dbe1b215f5c6c462e76909d240bd96472b84de
14769Author: Wolfgang Denk <wd@denx.de>
14770Date: Thu Jul 5 17:56:27 2007 +0200
14771
14772 Fixing some typos etc. introduced mainly by cfg patches.
14773
14774 Signed-off-by: Wolfgang Denk <wd@denx.de>
14775
14776commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
14777Author: Wolfgang Denk <wd@denx.de>
14778Date: Thu Jul 5 11:12:16 2007 +0200
14779
14780 Minor coding style cleanup. Update CHANGELOG.
14781
Wolfgang Denkb6b46842007-07-05 11:12:16 +020014782commit dca3b3d6d6396b67e5e84af53452164923c73443
14783Author: Jon Loeliger <jdl@jdl.com>
14784Date: Wed Jul 4 22:33:46 2007 -0500
14785
14786 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
14787
14788 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14789
14790commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
14791Author: Jon Loeliger <jdl@jdl.com>
14792Date: Wed Jul 4 22:33:38 2007 -0500
14793
14794 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
14795
14796 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14797
14798commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
14799Author: Jon Loeliger <jdl@jdl.com>
14800Date: Wed Jul 4 22:33:30 2007 -0500
14801
14802 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
14803
14804 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14805
14806commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
14807Author: Jon Loeliger <jdl@jdl.com>
14808Date: Wed Jul 4 22:33:23 2007 -0500
14809
14810 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
14811
14812 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14813
14814commit 26a34560d56a9df5bc2ae23525d9229736134757
14815Author: Jon Loeliger <jdl@jdl.com>
14816Date: Wed Jul 4 22:33:17 2007 -0500
14817
14818 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
14819
14820 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14821
14822commit a5cb23092a7d31490a33d4ec871468b63babfa3c
14823Author: Jon Loeliger <jdl@jdl.com>
14824Date: Wed Jul 4 22:33:13 2007 -0500
14825
14826 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
14827
14828 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14829
14830commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
14831Author: Jon Loeliger <jdl@jdl.com>
14832Date: Wed Jul 4 22:33:07 2007 -0500
14833
14834 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
14835
14836 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14837
14838commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
14839Author: Jon Loeliger <jdl@jdl.com>
14840Date: Wed Jul 4 22:33:01 2007 -0500
14841
14842 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
14843
14844 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14845
14846commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
14847Author: Jon Loeliger <jdl@jdl.com>
14848Date: Wed Jul 4 22:32:57 2007 -0500
14849
14850 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
14851
14852 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14853
14854commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
14855Author: Jon Loeliger <jdl@jdl.com>
14856Date: Wed Jul 4 22:32:51 2007 -0500
14857
14858 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
14859
14860 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14861
14862commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
14863Author: Jon Loeliger <jdl@jdl.com>
14864Date: Wed Jul 4 22:32:32 2007 -0500
14865
14866 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
14867
14868 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14869
14870commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
14871Author: Jon Loeliger <jdl@jdl.com>
14872Date: Wed Jul 4 22:32:25 2007 -0500
14873
14874 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
14875
14876 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14877
14878commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
14879Author: Jon Loeliger <jdl@jdl.com>
14880Date: Wed Jul 4 22:32:19 2007 -0500
14881
14882 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
14883
14884 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14885
14886commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
14887Author: Jon Loeliger <jdl@jdl.com>
14888Date: Wed Jul 4 22:32:10 2007 -0500
14889
14890 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
14891
14892 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14893
14894commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
14895Author: Jon Loeliger <jdl@jdl.com>
14896Date: Wed Jul 4 22:32:03 2007 -0500
14897
14898 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
14899
14900 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14901
14902commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
14903Author: Jon Loeliger <jdl@jdl.com>
14904Date: Wed Jul 4 22:31:56 2007 -0500
14905
14906 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
14907
14908 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14909
14910commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
14911Author: Jon Loeliger <jdl@jdl.com>
14912Date: Wed Jul 4 22:31:49 2007 -0500
14913
14914 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
14915
14916 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14917
14918commit 0b361c916617aff79e647b40f0e43361e0bbaccf
14919Author: Jon Loeliger <jdl@jdl.com>
14920Date: Wed Jul 4 22:31:42 2007 -0500
14921
14922 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
14923
14924 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14925
14926commit b730cda82e362df6a22f4c59c0a9b97e885b1014
14927Author: Jon Loeliger <jdl@jdl.com>
14928Date: Wed Jul 4 22:31:35 2007 -0500
14929
14930 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
14931
14932 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14933
14934commit d794cfefead5fc177cf4f41164e80382e9c9484a
14935Author: Jon Loeliger <jdl@jdl.com>
14936Date: Wed Jul 4 22:31:15 2007 -0500
14937
14938 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
14939
14940 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14941
14942commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
14943Author: Jon Loeliger <jdl@jdl.com>
14944Date: Wed Jul 4 22:31:07 2007 -0500
14945
14946 include/configs: Use new CONFIG_CMD_* in STx board config files.
14947
14948 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14949
14950commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
14951Author: Jon Loeliger <jdl@jdl.com>
14952Date: Wed Jul 4 22:30:58 2007 -0500
14953
14954 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
14955
14956 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14957
14958commit 2694690e285acaa34922f55f4b5ae030da60c55a
14959Author: Jon Loeliger <jdl@jdl.com>
14960Date: Wed Jul 4 22:30:50 2007 -0500
14961
14962 include/configs: Use new CONFIG_CMD_* in TQM board config files.
14963
14964 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14965
14966commit 1cc4c458329765b58e584a19821e796b3c10e976
14967Author: Jon Loeliger <jdl@jdl.com>
14968Date: Wed Jul 4 22:30:28 2007 -0500
14969
14970 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
14971
14972 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14973
14974commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
14975Author: Jon Loeliger <jdl@jdl.com>
14976Date: Wed Jul 4 22:30:06 2007 -0500
14977
14978 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
14979
14980 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14981
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020014982commit b44896215a09c60fa40cae906f7ed207bbc2c492
14983Author: Sergei Poselenov <sposelenov@emcraft.com>
14984Date: Thu Jul 5 08:17:37 2007 +0200
14985
14986 Merged POST framework with the current TOT.
14987
14988 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
14989
Wolfgang Denkb6b46842007-07-05 11:12:16 +020014990commit b24629fa377214d63bb40d1360e354b6d3e4af56
14991Author: Jon Loeliger <jdl@jdl.com>
14992Date: Wed Jun 13 13:23:15 2007 -0500
14993
14994 mpc86xx: Remove old CFG_CMD_* references.
14995
14996 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14997
14998commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
14999Author: Jon Loeliger <jdl@jdl.com>
15000Date: Wed Jun 13 13:22:54 2007 -0500
15001
15002 Add MPC8568MDS to MAKEALL 85xx target.
15003
15004 It was missing from the original port submission.
15005
15006 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15007
15008commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
15009Author: Jon Loeliger <jdl@jdl.com>
15010Date: Wed Jun 13 13:22:08 2007 -0500
15011
15012 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
15013
15014 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15015
15016commit 56b304ac2091689506088a9ae67f63fd6300cf16
15017Author: Jon Loeliger <jdl@jdl.com>
15018Date: Wed Jun 13 13:21:37 2007 -0500
15019
15020 Fix #if typo in CONFIG_CMD_* changes.
15021
15022 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15023
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020015024commit f780b83316d9af1f61d71cc88b1917b387b9b995
15025Author: Niklaus Giger <niklausgiger@gmx.ch>
15026Date: Wed Jun 27 18:11:38 2007 +0200
15027
15028 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
15029
15030 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
15031
15032commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
15033Author: Stefan Roese <sr@denx.de>
15034Date: Wed Jul 4 10:06:30 2007 +0200
15035
15036 ppc4xx: Update lwmon5 board
15037
15038 - Add optional ECC generation routine to preserve existing
15039 RAM values. This is needed for the Linux log-buffer support
15040 - Add optional DDR2 setup with CL=4
15041 - GPIO50 not used anymore
15042 - Lime register setup added
15043
15044 Signed-off-by: Stefan Roese <sr@denx.de>
15045
Wolfgang Denkb6b46842007-07-05 11:12:16 +020015046commit 6810a34677dbc446334f5e451f1682426dd33b49
15047Author: Grant Likely <grant.likely@secretlab.ca>
15048Date: Tue Jul 3 00:17:28 2007 -0600
15049
15050 Fix Makefile to use $(MKCONFIG) macro for all board ports
15051
15052 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15053
15054commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
15055Author: Grant Likely <grant.likely@secretlab.ca>
15056Date: Tue Jul 3 00:17:28 2007 -0600
15057
15058 Fix Makefile to use $(MKCONFIG) macro for all board ports
15059
15060 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15061
15062commit 057004f4a4863554d56cc56268bfa7c7d9738e27
15063Author: Grant Likely <grant.likely@secretlab.ca>
15064Date: Tue Jul 3 00:34:49 2007 -0600
15065
15066 Correct fixup relocation for mpc83xx
15067
15068 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15069
15070commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
15071Author: Grant Likely <grant.likely@secretlab.ca>
15072Date: Tue Jul 3 00:34:44 2007 -0600
15073
15074 Correct fixup relocation for mpc8260
15075
15076 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15077
15078commit f3a52fe05923935db86985daf9438e2f70ac39aa
15079Author: Grant Likely <grant.likely@secretlab.ca>
15080Date: Tue Jul 3 00:34:39 2007 -0600
15081
15082 Correct fixup relocation for mpc824x
15083
15084 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15085
15086commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
15087Author: Grant Likely <grant.likely@secretlab.ca>
15088Date: Tue Jul 3 00:34:34 2007 -0600
15089
15090 Correct fixup relocation for mpc8220
15091
15092 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15093
15094commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
15095Author: Grant Likely <grant.likely@secretlab.ca>
15096Date: Tue Jul 3 00:34:29 2007 -0600
15097
15098 Correct fixup relocation for MPC5xxx
15099
15100 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15101
15102commit 3649cd99ba815b6601868735765602f00ef3692b
15103Author: Grant Likely <grant.likely@secretlab.ca>
15104Date: Tue Jul 3 00:34:24 2007 -0600
15105
15106 Correct relocation fixup for mpc5xx
15107
15108 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15109
15110commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
15111Author: Grant Likely <grant.likely@secretlab.ca>
15112Date: Tue Jul 3 00:34:19 2007 -0600
15113
15114 Don't set gd->reloc_off if relocation of .fixup works correctly
15115
15116 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15117
15118commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
15119Author: Grant Likely <grant.likely@secretlab.ca>
15120Date: Tue Jul 3 00:34:14 2007 -0600
15121
15122 Remove obsolete mpc83xx linker scripts
15123
15124 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15125
15126commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
15127Author: Grant Likely <grant.likely@secretlab.ca>
15128Date: Tue Jul 3 00:34:09 2007 -0600
15129
15130 Consolidate mpc8260 linker scripts
15131
15132 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15133
15134commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
15135Author: Grant Likely <grant.likely@secretlab.ca>
15136Date: Tue Jul 3 00:34:04 2007 -0600
15137
15138 Remove obsolete mpc824x linker scripts
15139
15140 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15141
15142commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
15143Author: Grant Likely <grant.likely@secretlab.ca>
15144Date: Tue Jul 3 00:33:59 2007 -0600
15145
15146 Remove obsolete mpc824x linker scripts (3 of 4)
15147
15148 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15149
15150commit a71c084f3ac7fedf144537db2b2da47323068833
15151Author: Grant Likely <grant.likely@secretlab.ca>
15152Date: Tue Jul 3 00:33:53 2007 -0600
15153
15154 Remove obsolete mpc824x linker scripts (2 of 4)
15155
15156 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15157
15158commit f670a15468d1365241d40022b9408e1004181f5e
15159Author: Grant Likely <grant.likely@secretlab.ca>
15160Date: Tue Jul 3 00:33:48 2007 -0600
15161
15162 Remove obsolete mpc824x linker scripts (1 of 4)
15163
15164 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15165
15166commit 09555bd45a04c0e54f172528d21bc18896550d28
15167Author: Grant Likely <grant.likely@secretlab.ca>
15168Date: Tue Jul 3 00:33:43 2007 -0600
15169
15170 Remove obsolete mpc8220 linker scripts
15171
15172 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15173
15174commit 5efb992f046e51225c93d52f80fecbe433abd789
15175Author: Grant Likely <grant.likely@secretlab.ca>
15176Date: Tue Jul 3 00:33:38 2007 -0600
15177
15178 Remove obsolete mpc5xxx linker scripts (3 of 3)
15179
15180 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15181
15182commit 07c13dfef65b31647e69d8b61daa1eec598add1a
15183Author: Grant Likely <grant.likely@secretlab.ca>
15184Date: Tue Jul 3 00:33:33 2007 -0600
15185
15186 Remove obsolete mpc5xxx linker scripts (2 of 3)
15187
15188 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15189
15190commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
15191Author: Grant Likely <grant.likely@secretlab.ca>
15192Date: Tue Jul 3 00:33:28 2007 -0600
15193
15194 Remove obsolete mpc5xxx linker scripts (1 of 3)
15195
15196 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15197
15198commit b7d8e05f8675249b5f208aa73babeed384a4519d
15199Author: Grant Likely <grant.likely@secretlab.ca>
15200Date: Tue Jul 3 00:33:23 2007 -0600
15201
15202 Remove obsolete mpc5xx linker scripts
15203
15204 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15205
15206commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
15207Author: Grant Likely <grant.likely@secretlab.ca>
15208Date: Tue Jul 3 00:33:18 2007 -0600
15209
15210 Consolidate mpc83xx linker scripts
15211
15212 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15213
15214commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
15215Author: Grant Likely <grant.likely@secretlab.ca>
15216Date: Tue Jul 3 00:33:13 2007 -0600
15217
15218 Consolidate mpc8260 linker scripts
15219
15220 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15221
15222commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
15223Author: Grant Likely <grant.likely@secretlab.ca>
15224Date: Tue Jul 3 00:33:08 2007 -0600
15225
15226 Consolidate mpc824x linker scripts
15227
15228 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15229
15230commit 9c757b789a59a855db57b448dd825329c4e9c4a0
15231Author: Grant Likely <grant.likely@secretlab.ca>
15232Date: Tue Jul 3 00:33:03 2007 -0600
15233
15234 Consolidate mpc8220 linker scripts
15235
15236 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15237
15238commit d181c9a15cd41863fe24840d17848429f27d3c8c
15239Author: Grant Likely <grant.likely@secretlab.ca>
15240Date: Tue Jul 3 00:32:58 2007 -0600
15241
15242 Consolidate mpc5xxx linker scripts
15243
15244 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15245
15246commit 287ac924adb7291bebe5086652a362a30ab28b13
15247Author: Grant Likely <grant.likely@secretlab.ca>
15248Date: Tue Jul 3 00:32:53 2007 -0600
15249
15250 Consolidate mpc5xx linker scripts
15251
15252 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15253
15254commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
15255Author: Wolfgang Denk <wd@denx.de>
15256Date: Wed Jul 4 00:43:53 2007 +0200
15257
15258 Fix a few file permission problems.
15259
15260 Signed-off-by: Wolfgang Denk <wd@denx.de>
15261
15262commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
15263Author: Wolfgang Denk <wd@denx.de>
15264Date: Wed Jul 4 00:38:38 2007 +0200
15265
15266 Minor coding style cleanup. Rebuild CHANGELOG file.
15267
Wolfgang Denk78e0cf22007-07-04 00:38:38 +020015268commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
15269Author: Jon Loeliger <jdl@jdl.com>
15270Date: Mon Jun 11 19:03:44 2007 -0500
15271
15272 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
15273
15274 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15275
15276commit 602ad3b33d9ceef83dbab46be68646d645d637ee
15277Author: Jon Loeliger <jdl@jdl.com>
15278Date: Mon Jun 11 19:03:39 2007 -0500
15279
15280 README: Rewrite command line config to use CONFIG_CMD_* names.
15281
15282 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15283
15284commit 72a074cec68e5bad60d63206c050974e08afd804
15285Author: Jon Loeliger <jdl@jdl.com>
15286Date: Mon Jun 11 19:03:34 2007 -0500
15287
15288 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15289
15290 This is a compatibility step that allows both the older form
15291 and the new form to co-exist for a while until the older can
15292 be removed entirely.
15293
15294 All transformations are of the form:
15295 Before:
15296 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15297 After:
15298 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15299
15300 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15301
15302commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
15303Author: Jon Loeliger <jdl@jdl.com>
15304Date: Mon Jun 11 19:03:28 2007 -0500
15305
15306 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15307
15308 This is a compatibility step that allows both the older form
15309 and the new form to co-exist for a while until the older can
15310 be removed entirely.
15311
15312 All transformations are of the form:
15313 Before:
15314 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15315 After:
15316 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15317
15318 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15319
15320commit 9107ebe0d352420895ab69b715697bdebc8caf50
15321Author: Jon Loeliger <jdl@jdl.com>
15322Date: Mon Jun 11 19:03:23 2007 -0500
15323
15324 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15325
15326 This is a compatibility step that allows both the older form
15327 and the new form to co-exist for a while until the older can
15328 be removed entirely.
15329
15330 All transformations are of the form:
15331 Before:
15332 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15333 After:
15334 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15335
15336 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15337
15338commit 5e378003d592ea828ec69d6defcd4de79096dd5c
15339Author: Jon Loeliger <jdl@jdl.com>
15340Date: Mon Jun 11 19:03:19 2007 -0500
15341
15342 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15343
15344 This is a compatibility step that allows both the older form
15345 and the new form to co-exist for a while until the older can
15346 be removed entirely.
15347
15348 All transformations are of the form:
15349 Before:
15350 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15351 After:
15352 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15353
15354 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15355
15356commit 737184114ec9c9e0ab94d6713536126073bd2472
15357Author: Jon Loeliger <jdl@jdl.com>
15358Date: Mon Jun 11 19:03:15 2007 -0500
15359
15360 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15361
15362 This is a compatibility step that allows both the older form
15363 and the new form to co-exist for a while until the older can
15364 be removed entirely.
15365
15366 All transformations are of the form:
15367 Before:
15368 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15369 After:
15370 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15371
15372 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15373
15374commit f48070fe5fe440dfb5ee5268c920de70e48ea327
15375Author: Jon Loeliger <jdl@jdl.com>
15376Date: Mon Jun 11 19:03:08 2007 -0500
15377
15378 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15379
15380 This is a compatibility step that allows both the older form
15381 and the new form to co-exist for a while until the older can
15382 be removed entirely.
15383
15384 All transformations are of the form:
15385 Before:
15386 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15387 After:
15388 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15389
15390 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15391
15392commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
15393Author: Jon Loeliger <jdl@jdl.com>
15394Date: Mon Jun 11 19:03:03 2007 -0500
15395
15396 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15397
15398 This is a compatibility step that allows both the older form
15399 and the new form to co-exist for a while until the older can
15400 be removed entirely.
15401
15402 All transformations are of the form:
15403 Before:
15404 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15405 After:
15406 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15407
15408 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15409
15410commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
15411Author: Jon Loeliger <jdl@jdl.com>
15412Date: Mon Jun 11 19:02:58 2007 -0500
15413
15414 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15415
15416 This is a compatibility step that allows both the older form
15417 and the new form to co-exist for a while until the older can
15418 be removed entirely.
15419
15420 All transformations are of the form:
15421 Before:
15422 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15423 After:
15424 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15425
15426 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15427
15428commit 98b79003c21c2578206003256de4e781d6b36ca8
15429Author: Jon Loeliger <jdl@jdl.com>
15430Date: Mon Jun 11 19:02:53 2007 -0500
15431
15432 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15433
15434 This is a compatibility step that allows both the older form
15435 and the new form to co-exist for a while until the older can
15436 be removed entirely.
15437
15438 All transformations are of the form:
15439 Before:
15440 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15441 After:
15442 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15443
15444 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15445
15446commit 6e2115acb6a892d53a6881bf253ae41d3df39156
15447Author: Jon Loeliger <jdl@jdl.com>
15448Date: Mon Jun 11 19:02:49 2007 -0500
15449
15450 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15451
15452 This is a compatibility step that allows both the older form
15453 and the new form to co-exist for a while until the older can
15454 be removed entirely.
15455
15456 All transformations are of the form:
15457 Before:
15458 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15459 After:
15460 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15461
15462 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15463
15464commit 45cdb9b72c94655c7308b464a2666057c0b286e0
15465Author: Jon Loeliger <jdl@jdl.com>
15466Date: Mon Jun 11 19:02:34 2007 -0500
15467
15468 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15469
15470 This is a compatibility step that allows both the older form
15471 and the new form to co-exist for a while until the older can
15472 be removed entirely.
15473
15474 All transformations are of the form:
15475 Before:
15476 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15477 After:
15478 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15479
15480 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15481
15482commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
15483Author: Jon Loeliger <jdl@jdl.com>
15484Date: Mon Jun 11 19:02:20 2007 -0500
15485
15486 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15487
15488 This is a compatibility step that allows both the older form
15489 and the new form to co-exist for a while until the older can
15490 be removed entirely.
15491
15492 All transformations are of the form:
15493 Before:
15494 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15495 After:
15496 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15497
15498 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15499
15500commit d5be43de93ff905c465e509d45a3164ef48d26e7
15501Author: Jon Loeliger <jdl@jdl.com>
15502Date: Mon Jun 11 19:02:10 2007 -0500
15503
15504 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15505
15506 This is a compatibility step that allows both the older form
15507 and the new form to co-exist for a while until the older can
15508 be removed entirely.
15509
15510 All transformations are of the form:
15511 Before:
15512 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15513 After:
15514 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15515
15516 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15517
15518commit b453960d4fdb87b3970d96119b90df2ed024fc4a
15519Author: Jon Loeliger <jdl@jdl.com>
15520Date: Mon Jun 11 19:02:05 2007 -0500
15521
15522 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15523
15524 This is a compatibility step that allows both the older form
15525 and the new form to co-exist for a while until the older can
15526 be removed entirely.
15527
15528 All transformations are of the form:
15529 Before:
15530 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15531 After:
15532 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15533
15534 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15535
15536commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
15537Author: Jon Loeliger <jdl@jdl.com>
15538Date: Mon Jun 11 19:01:54 2007 -0500
15539
15540 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15541
15542 This is a compatibility step that allows both the older form
15543 and the new form to co-exist for a while until the older can
15544 be removed entirely.
15545
15546 All transformations are of the form:
15547 Before:
15548 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15549 After:
15550 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15551
15552 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15553
15554commit a76adc8142c1d956385a109e0b70f9319ede4d66
15555Author: Jon Loeliger <jdl@jdl.com>
15556Date: Mon Jun 11 19:01:43 2007 -0500
15557
15558 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15559
15560 This is a compatibility step that allows both the older form
15561 and the new form to co-exist for a while until the older can
15562 be removed entirely.
15563
15564 All transformations are of the form:
15565 Before:
15566 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15567 After:
15568 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15569
15570 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15571
15572commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
15573Author: Jon Loeliger <jdl@jdl.com>
15574Date: Mon Jun 11 19:01:34 2007 -0500
15575
15576 Introduce initial versions of new Command Config files.
15577
15578 Derive three new files from cmd_confdefs.h:
15579 config_bootp.h - Has BOOTP related config options, not commands
15580 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
15581 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
15582
15583 For now, include "config_bootp.h" for compatability until all
15584 users of it directly include it properly.
15585
15586 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15587
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020015588commit 1f2a05898658900dc5717761e27abf2052e67e13
15589Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
15590Date: Sat Jun 30 18:50:48 2007 +0200
15591
15592 Fix S-ATA support.
15593
15594 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
15595
15596commit a5d71e290f3673269be8eefb4ec44f53412f9461
15597Author: Heiko Schocher <hs@pollux.denx.de>
15598Date: Mon Jun 25 19:11:37 2007 +0200
15599
15600 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
15601
15602 Signed-off-by: Heiko Schocher <hs@denx.de>
15603
15604commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
15605Author: Niklaus Giger <niklaus.giger@nestal.com>
15606Date: Mon Jun 25 17:03:13 2007 +0200
15607
15608 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
15609
15610 This patch prints the DDR status registers upon machine check
15611 interrupt on the 440EPx/GRx. This can be useful especially when
15612 ECC support is enabled.
15613
15614 I added some small changes to the original patch from Niklaus to
15615 make it compile clean.
15616
15617 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
15618 Signed-off-by: Stefan Roese <sr@denx.de>
15619
15620commit 807018fb7faceb429ce0cb47baa2073746b33a4e
15621Author: Niklaus Giger <niklaus.giger@nestal.com>
15622Date: Mon Jun 25 16:50:55 2007 +0200
15623
15624 ppc4xx: Fix O=buildir builds
15625
15626 This patch fixes the problem to assemble cpu/ppc4xx/start.S
15627 experienced last week where building failed having specified
15628 O=../build.sequoia.
15629
15630 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
15631
15632commit 466fff1a7bb5fe764a06450626f6098219f446b8
15633Author: Stefan Roese <sr@denx.de>
15634Date: Mon Jun 25 15:57:39 2007 +0200
15635
15636 ppc4xx: Add pci_pre_init() for 405 boards
15637
15638 This patch removes the CFG_PCI_PRE_INIT option completely, since
15639 it's not needed anymore with the patch from Matthias Fuchs with
15640 the "weak" pci_pre_init() implementation.
15641
15642 Signed-off-by: Stefan Roese <sr@denx.de>
15643
15644commit 6f35c53166213c24a5a0e2390ed861136ff73870
15645Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15646Date: Sun Jun 24 17:41:21 2007 +0200
15647
15648 ppc4xx: Maintenance patch for esd's CPCI405 derivats
15649
15650 -add pci_pre_init() for pci interrupt fixup code
15651 -disable phy sleep mode via reset_phy() function
15652 -use correct io accessors
15653 -cleanup
15654
15655 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15656
15657commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
15658Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15659Date: Sun Jun 24 17:23:41 2007 +0200
15660
15661 ppc4xx: Add pci_pre_init() for 405 boards
15662
15663 This patch adds support for calling a plattform dependant
15664 pci_pre_init() function for 405 boards. This can be used to
15665 move the current pci_405gp_fixup_irq() function into the
15666 board code.
15667
15668 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
15669 A default function with 'weak' attribute is used when
15670 a board specific pci_pre_init() is not implemented.
15671
15672 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15673
15674commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
15675Author: Wolfgang Denk <wd@denx.de>
15676Date: Fri Jun 22 23:59:00 2007 +0200
15677
15678 Coding stylke cleanup; rebuild CHANGELOG
15679
Wolfgang Denk1636d1c2007-06-22 23:59:00 +020015680commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
15681Author: Igor Lisitsin <igor@emcraft.com>
15682Date: Wed Apr 18 14:55:19 2007 +0400
15683
15684 Adapt log buffer code to support Linux 2.6
15685
15686 A new environment variable, "logversion", selects the log buffer
15687 behaviour. If it is not set or set to a value other than 2, then the
15688 old, Linux 2.4.4, behaviour is selected.
15689
15690 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
15691 --
15692
15693commit a11e06965ec91270c51853407ff1261d3c740386
15694Author: Igor Lisitsin <igor@emcraft.com>
15695Date: Wed Mar 28 19:06:19 2007 +0400
15696
15697 Extend POST support for PPC440
15698
15699 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
15700
15701 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
15702 --
15703
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020015704commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
15705Author: Heiko Schocher <hs@pollux.denx.de>
15706Date: Fri Jun 22 19:11:54 2007 +0200
15707
15708 [PCS440EP] upgrade the PCS440EP board:
15709 - Show on the Status LEDs, some States of the board.
15710 - Get the MAC addresses from the EEProm
15711 - use PREBOOT
15712 - use the CF on the board.
15713 - check the U-Boot image in the Flash with a SHA1
15714 checksum.
15715 - use dynamic TLB entries generation for the SDRAM
15716
15717 Signed-off-by: Heiko Schocher <hs@denx.de>
15718
15719commit 3a1f5c81b0b9557817a789bece839905581c2205
15720Author: Stefan Roese <sr@denx.de>
15721Date: Fri Jun 22 16:58:40 2007 +0200
15722
15723 ppc4xx: Fix problem with extended program_tlb() funtion
15724
15725 The recently extended program_tlb() function had a problem when
15726 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
15727 virtual address was not incremented. This patch fixes this issue
15728 and is tested on Katmai with 512MB SDRAM.
15729
15730 Signed-off-by: Stefan Roese <sr@denx.de>
15731
Wolfgang Denk1636d1c2007-06-22 23:59:00 +020015732commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
15733Author: Rafal Jaworowski <raj@semihalf.com>
15734Date: Fri Jun 22 14:58:04 2007 +0200
15735
15736 [ppc] Fix build breakage for all non-4xx PowerPC variants.
15737
15738 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
15739 - minor 4xx cleanup
15740
Wolfgang Denka5a38f42007-08-16 11:51:04 +020015741commit d677b32855f577ae2690dcd64a172cdd706e0ffc
15742Author: Mike Frysinger <vapier@gentoo.org>
15743Date: Fri Jun 22 10:34:12 2007 +0200
15744
15745 [patch] add nand_init() prototype to nand.h
15746
15747 since nand_init() is expected to be called by other parts of u-boot, there
15748 should be a prototype for it in nand.h
15749
15750 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15751 Signed-off-by: Stefan Roese <sr@denx.de>
15752
Wolfgang Denk1636d1c2007-06-22 23:59:00 +020015753commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
15754Author: Wolfgang Denk <wd@denx.de>
15755Date: Wed Jun 20 18:14:24 2007 +0200
15756
15757 Coding style cleanup. Refresh CHANGELOG.
15758
Wolfgang Denk83b4cfa2007-06-20 18:14:24 +020015759commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
15760Author: Stefan Roese <sr@denx.de>
15761Date: Tue Jun 19 17:22:44 2007 +0200
15762
15763 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
15764
15765 This patch adds a board command to configure the I2C bootstrap EEPROM
15766 values. Right now 533 and 667MHz are supported for booting either via NOR
15767 or NAND FLASH. Here the usage:
15768
15769 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
15770 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
15771
15772 Signed-off-by: Stefan Roese <sr@denx.de>
15773
15774commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
15775Author: Stefan Roese <sr@denx.de>
15776Date: Tue Jun 19 16:42:31 2007 +0200
15777
15778 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
15779
15780 The latest changes showed a problem with the location of the NAND-SPL
15781 image in the OCM and the init-data area (incl. cache). This patch
15782 fixes this problem.
15783
15784 Signed-off-by: Stefan Roese <sr@denx.de>
15785
15786commit 86ba99e34194394052d24c04dc40d1263d29a26f
15787Author: Stefan Roese <sr@denx.de>
15788Date: Tue Jun 19 16:40:58 2007 +0200
15789
15790 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
15791
15792 Signed-off-by: Stefan Roese <sr@denx.de>
15793
Wolfgang Denk05675732007-08-18 22:00:38 +020015794commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
15795Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15796Date: Mon Jun 18 13:50:13 2007 -0500
15797
15798 Added M5329AFEE and M5329BFEE Platforms
15799
15800 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
15801 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
15802 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
15803 rtc/mcfrtc.c
15804
15805 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
15806 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
15807 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
15808 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
15809 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
15810 lib_m68k/time.c, net/eth.c and rtc/Makefile
15811
15812 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15813
Wolfgang Denk63640012007-10-14 00:13:19 +020015814commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
15815Author: Michal Simek <monstr@monstr.eu>
15816Date: Sun Jun 17 19:04:11 2007 +0200
15817
15818 [fix] email reparation
15819
15820commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
15821Author: Michal Simek <monstr@monstr.eu>
15822Date: Sun Jun 17 19:03:21 2007 +0200
15823
15824 [FIX] fix microblaze file permitission
15825
Wolfgang Denk83b4cfa2007-06-20 18:14:24 +020015826commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
15827Author: Stefan Roese <sr@denx.de>
15828Date: Fri Jun 15 11:33:41 2007 +0200
15829
15830 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
15831
15832 Now CONFIG_440 has to be defined in all PPC440 board config files.
15833
15834 Signed-off-by: Stefan Roese <sr@denx.de>
15835
15836commit efa35cf12d914d4caba942acd5a6c45f217de302
15837Author: Grzegorz Bernacki <gjb@semihalf.com>
15838Date: Fri Jun 15 11:19:28 2007 +0200
15839
15840 ppc4xx: Clean up 440 exceptions handling
15841
15842 - Introduced dedicated switches for building 440 and 405 images required
15843 for 440-specific machine instructions like 'rfmci' etc.
15844
15845 - Exception vectors moved to the proper location (_start moved away from
15846 the critical exception handler space, which it occupied)
15847
15848 - CriticalInput now serviced (with default handler)
15849
15850 - MachineCheck properly serviced (added a dedicated handler and return
15851 subroutine)
15852
15853 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
15854 unhandled and those not relevant for 4xx were eliminated)
15855
15856 - Eliminated Linux leftovers, removed dead code
15857
15858 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15859 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
15860 Signed-off-by: Stefan Roese <sr@denx.de>
15861
15862commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
15863Author: Stefan Roese <sr@denx.de>
15864Date: Fri Jun 15 08:18:01 2007 +0200
15865
15866 [ppc4xx] Add initial lwmon5 board support
15867
15868 This patch adds initial support for the Liebherr lwmon5 board euqipped
15869 with an AMCC 440EPx PowerPC.
15870
15871 Signed-off-by: Stefan Roese <sr@denx.de>
15872
15873commit 85f737376d5ff3d5f0d45a8b657686326d175307
15874Author: Stefan Roese <sr@denx.de>
15875Date: Fri Jun 15 07:39:43 2007 +0200
15876
15877 [ppc4xx] Extend 44x GPIO setup with default output state
15878
15879 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
15880 is extended with the default GPIO output state (level).
15881
15882 Signed-off-by: Stefan Roese <sr@denx.de>
15883
15884commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
15885Author: Stefan Roese <sr@denx.de>
15886Date: Thu Jun 14 11:14:32 2007 +0200
15887
15888 [ppc4xx] Extend program_tlb() with virtual & physical addresses
15889
15890 Now program_tlb() allows to program a TLB (or multiple) with
15891 different virtual and physical addresses. With this change, now one
15892 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
15893 diabled and once with caches enabled.
15894
15895 Signed-off-by: Stefan Roese <sr@denx.de>
15896
15897commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
15898Author: Detlev Zundel <dzu@denx.de>
15899Date: Wed May 23 19:02:41 2007 +0200
15900
15901 Change 'repeatable' attribute of some commands to sensible values.
15902
15903 Most prominently this changes 'erase' to be non-repeatable.
15904
15905 Signed-off-by: Detlev Zundel <dzu@denx.de>
15906
15907commit 5afb202093f6a001797db92cf695b93a70ea9ab4
15908Author: Detlev Zundel <dzu@denx.de>
15909Date: Wed May 23 18:47:48 2007 +0200
15910
15911 Fix 'run' not to continue after interrupted command
15912
15913 Signed-off-by: Detlev Zundel <dzu@denx.de>
15914
Wolfgang Denk9986bc32007-08-12 21:34:50 +020015915commit 9b7464a2c88614e1061f509c48930a3d240d1a35
15916Author: Jason Jin <Jason.jin@freescale.com>
15917Date: Mon Jun 11 15:14:24 2007 +0200
15918
15919 USB: This patch fix readl in ohci swap reg access.
15920
15921 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15922
Wolfgang Denk83b4cfa2007-06-20 18:14:24 +020015923commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
15924Author: Bartlomiej Sieka <tur@semihalf.com>
15925Date: Fri Jun 8 14:52:22 2007 +0200
15926
15927 TQM5200: Add Flat Device Tree support, update default env. accordingly.
15928
15929 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
15930 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15931
15932commit 9045f33c023f698660a2e45d1b2194c0711abebc
15933Author: Wolfgang Denk <wd@denx.de>
15934Date: Fri Jun 8 10:24:58 2007 +0200
15935
15936 Fix config problems on SC3 board; make ide_reset_timeout work.
15937
15938commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
15939Author: Benoît Monin <bmonin@adeneo.eu>
15940Date: Fri Jun 8 09:55:24 2007 +0200
15941
15942 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
15943
15944 Set the correct value in GPIOx_TCR when configuring the gpio
15945 with CFG_440_GPIO_TABLE.
15946
15947 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
15948 Signed-off-by: Stefan Roese <sr@denx.de>
15949
Wolfgang Denk85eb5ca2007-08-14 09:47:27 +020015950commit f539edc076cfe52bff919dd512ba8d7af0e22092
15951Author: Vadim Bendebury <vbendeb@google.com>
15952Date: Thu May 24 15:52:25 2007 -0700
15953
15954 cosmetic changes to bcm570x driver
15955
15956 This is a cosmetic only changes submission.
15957 It affects files relevant to bcm570x driver.
15958 the commands used to generate this change was
15959
15960 cd drivers
15961 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
15962
15963 The BMW target (the only one using this chip so far) builds cleanly, the
15964 `before and after' generated object files for drivers/bcm570x.c and
15965 drivers/tigon3.o are identical as reported by objdump -d
15966
15967 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
15968 Signed-off-by: Ben Warren <bwarren@qstreams.com>
15969
Wolfgang Denk83b4cfa2007-06-20 18:14:24 +020015970commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
15971Author: Wolfgang Denk <wd@denx.de>
15972Date: Wed Jun 6 16:26:56 2007 +0200
15973
15974 Coding Style cleanup; generate new CHANGELOG file.
15975
15976 Signed-off-by: Wolfgang Denk <wd@denx.de>
15977
Wolfgang Denk9986bc32007-08-12 21:34:50 +020015978commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
15979Author: Markus Klotzbuecher <mk@denx.de>
15980Date: Wed Jun 6 11:49:44 2007 +0200
15981
15982 TRAB, USB: update trab board configuration for use of generic ohci driver
15983
15984commit dace45acd1c1357daa9322099d07c9a9e08b0024
15985Author: Markus Klotzbuecher <mk@denx.de>
15986Date: Wed Jun 6 11:49:43 2007 +0200
15987
15988 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
15989
15990commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
15991Author: Markus Klotzbuecher <mk@denx.de>
15992Date: Wed Jun 6 11:49:43 2007 +0200
15993
15994 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
15995
15996commit fc43be478f2aa37ce38acd85355038866e4162af
15997Author: Markus Klotzbuecher <mk@denx.de>
15998Date: Wed Jun 6 11:49:35 2007 +0200
15999
16000 USB/OHCI: endianness cleanup in the generic ohci driver
16001
Wolfgang Denk725671c2007-06-06 16:26:56 +020016002commit c440bfe6d6d92d66478a7e84402b31f48413617b
16003Author: Stefan Roese <sr@denx.de>
16004Date: Wed Jun 6 11:42:13 2007 +0200
16005
16006 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
16007
16008 This patch adds NAND booting support for the AMCC Acadia eval board.
16009
16010 Please make sure to configure jumper J7 to position 2-3 when booting
16011 from NOR, and to position 1-2 when booting for NAND.
16012
16013 I also added a board command to configure the I2C bootstrap EEPROM
16014 values. Right now only 267MHz is support for booting either via NOR
16015 or NAND FLASH. Here the usage:
16016
16017 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
16018 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
16019
16020 Signed-off-by: Stefan Roese <sr@denx.de>
16021
Wolfgang Denk9986bc32007-08-12 21:34:50 +020016022commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
16023Author: Rodolfo Giometti <giometti@linux.it>
16024Date: Wed Jun 6 10:08:14 2007 +0200
16025
16026 Files include/linux/byteorder/{big,little}_endian.h define
16027 __BIG_ENDIAN and __LITTLE_ENDIAN.
16028
16029 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
16030
16031commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
16032Author: Zhang Wei <wei.zhang@freescale.com>
16033Date: Wed Jun 6 10:08:14 2007 +0200
16034
16035 Add USB PCI-OHCI, USB keyboard and event poll support to the
16036 MPC8641HPCN board config file.
16037
16038 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
16039
16040commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
16041Author: Zhang Wei <wei.zhang@freescale.com>
16042Date: Wed Jun 6 10:08:14 2007 +0200
16043
16044 USB PCI-OHCI, interrupt pipe and usb event poll support
16045
16046 This patch added USB PCI-OHCI chips support, interrupt pipe support
16047 and usb event poll support. For supporting the USB interrupt pipe, the
16048 globe urb_priv is moved to purb in ed struct. Now, we can process
16049 several urbs at one time. The interrupt pipe support codes are ported
16050 from Linux kernel 2.4.
16051
16052 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
16053
16054commit fdcfaa1b02268b2899e374b35adf936c911a47eb
16055Author: Zhang Wei <wei.zhang@freescale.com>
16056Date: Wed Jun 6 10:08:13 2007 +0200
16057
16058 USB event poll support
16059
16060 This patch adds USB event poll support, which could be used in usbkbd
16061 and other usb devices driver when the asynchronous interrupt
16062 processing is supported.
16063
16064 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
16065
16066commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
16067Author: Rodolfo Giometti <giometti@linux.it>
16068Date: Wed Jun 6 10:08:12 2007 +0200
16069
16070 ISP116x: delay for crappy USB keys
16071
16072 Using some (very) slow USB keys cause the USB host controller buffers
16073 are not ready to be read by the CPU so we need an extra delay before
16074 reading the USB storage data.
16075
16076 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
16077
16078commit 09444143670c9c2243cb7aba9f70b3713d33bed1
16079Author: Markus Klotzbuecher <mk@denx.de>
16080Date: Wed Jun 6 10:08:12 2007 +0200
16081
16082 Change duplicate usb_cpu_init_fail to usb_board_init_fail
16083
16084 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
16085 this out.
16086
16087 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16088
Wolfgang Denk725671c2007-06-06 16:26:56 +020016089commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
16090Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16091Date: Tue Jun 5 12:30:52 2007 -0500
16092
16093 mpc8641 image size cleanup
16094
16095 e600 does not have a bootpg restriction.
16096 Move the version string to beginning of image at fff00000.
16097 Resetvec.S is not needed.
16098 Update flash copy instructions.
16099 Add tftpflash env variable
16100
16101 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16102 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16103
16104commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
16105Author: Benoît Monin <bmonin@adeneo.eu>
16106Date: Mon Jun 4 08:36:05 2007 +0200
16107
16108 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
16109
16110 The attached patch is mainly cosmetic, allowing u-boot to
16111 display the correct bootstrap option letter according to the
16112 datasheets.
16113
16114 The original patch was extended with 405EZ support by Stefan
16115 Roese.
16116
16117 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
16118 Signed-off-by: Stefan Roese <sr@denx.de>
16119
Wolfgang Denk9986bc32007-08-12 21:34:50 +020016120commit 5b1313fb2758ffce8b624457f777d8cc6709608d
16121Author: Nikita V. Youshchenko <yoush@debian.org>
16122Date: Wed May 23 12:45:19 2007 +0400
16123
16124 fix compilation problem for mpc8349itx CFG_RAMBOOT
16125
16126 Current include/configs/MPC8349ITX.h does contain some support for building
16127 image that will be started from memory (without putting in into flash).
16128 It could be triggered by building with TEXT_BASE set to a low value.
16129
16130 However, this support is incomplete: using of low TEXT_BASE causes
16131 defining configuration macros in inconsistent way, which later leads
16132 to compilation errors. In particular. flash support is being disabled,
16133 but then flash structures get referenced.
16134
16135 This patch fixes this, making it possible to build with low TEXT_BASE.
16136
16137 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
16138
16139 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16140
16141commit 8a364f0970de49949d635e60accf463c6443ef8c
16142Author: Nikita V. Youshchenko <yoush@debian.org>
16143Date: Wed May 23 12:45:25 2007 +0400
16144
16145 add missing 'console' var to default mpc8349itx config
16146
16147 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16148
Wolfgang Denk725671c2007-06-06 16:26:56 +020016149commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
16150Author: Stefan Roese <sr@denx.de>
16151Date: Fri Jun 1 16:18:17 2007 +0200
16152
16153 ppc4xx: Add missing file for Bamboo NAND booting support
16154
16155 Signed-off-by: Stefan Roese <sr@denx.de>
16156
16157commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
16158Author: Stefan Roese <sr@denx.de>
16159Date: Fri Jun 1 15:58:19 2007 +0200
16160
16161 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
16162
16163 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
16164 suggested by AMCC it is not recommended to dynamically change the EBC
16165 speed after bootup. So we undo this change to be on the safe side.
16166
16167 Signed-off-by: Stefan Roese <sr@denx.de>
16168
16169commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
16170Author: Stefan Roese <sr@denx.de>
16171Date: Fri Jun 1 15:29:04 2007 +0200
16172
16173 ppc4xx: Update Sequoia NAND booting support with ECC
16174
16175 Signed-off-by: Stefan Roese <sr@denx.de>
16176
16177commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
16178Author: Stefan Roese <sr@denx.de>
16179Date: Fri Jun 1 15:27:11 2007 +0200
16180
16181 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
16182
16183 This patch adds NAND booting support for the AMCC Bamboo eval board.
16184 Since the NAND-SPL boot image is limited to 4kbytes, this version
16185 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
16186 supported, since the setup code for I2C DIMM autodetection and
16187 configuration is too big for this NAND bootloader.
16188
16189 Signed-off-by: Stefan Roese <sr@denx.de>
16190
16191commit 42be56f53c8b107868e6125c8524ae84293e95a7
16192Author: Stefan Roese <sr@denx.de>
16193Date: Fri Jun 1 15:23:04 2007 +0200
16194
16195 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
16196
16197 The U-Boot NAND booting support is now extended to support ECC
16198 upon loading of the NAND U-Boot image.
16199
16200 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
16201
16202 Signed-off-by: Stefan Roese <sr@denx.de>
16203
16204commit a471db07fbb65a841ffc9f4f112562b945230f98
16205Author: Stefan Roese <sr@denx.de>
16206Date: Fri Jun 1 15:19:29 2007 +0200
16207
16208 ppc4xx: Prepare Bamboo port for NAND booting support
16209
16210 This patch updates the "normal" Bamboo NOR booting port, so
16211 that it is compatible with the coming soon NAND booting
16212 Bamboo port.
16213
16214 It also enables the 2nd NAND flash on the Bamboo.
16215
16216 Signed-off-by: Stefan Roese <sr@denx.de>
16217
16218commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
16219Author: Stefan Roese <sr@denx.de>
16220Date: Fri Jun 1 15:16:58 2007 +0200
16221
16222 ppc4xx: Update in_be32() functions and friends to latest Linux version
16223
16224 Signed-off-by: Stefan Roese <sr@denx.de>
16225
16226commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
16227Author: Stefan Roese <sr@denx.de>
16228Date: Fri Jun 1 15:15:12 2007 +0200
16229
16230 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
16231
16232 This patch adds hardware ECC support to the NDFC driver. It also
16233 changes the register access from using the "simple" in32/out32
16234 functions to the in_be32/out_be32 functions, which make sure
16235 that the access is correctly synced. This is the only recommended
16236 access to SoC registers in the current Linux kernel.
16237
16238 Signed-off-by: Stefan Roese <sr@denx.de>
16239
16240commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
16241Author: Stefan Roese <sr@denx.de>
16242Date: Fri Jun 1 15:12:15 2007 +0200
16243
16244 NAND: Update nand_ecc.c to latest Linux version
16245
16246 This patch updates the nand_ecc code to the latest Linux version.
16247 The main reason for this is the more compact code. This makes
16248 it possible to include the ECC code into the NAND bootloader
16249 image (NAND_SPL) for PPC4xx.
16250
16251 Signed-off-by: Stefan Roese <sr@denx.de>
16252
16253commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
16254Author: Stefan Roese <sr@denx.de>
16255Date: Fri Jun 1 15:09:50 2007 +0200
16256
16257 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
16258
16259 Signed-off-by: Stefan Roese <sr@denx.de>
16260
16261commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
16262Author: Stefan Roese <sr@denx.de>
16263Date: Fri Jun 1 13:45:24 2007 +0200
16264
16265 ppc4xx: Change Luan config file to support ECC
16266
16267 With the updated 44x DDR2 driver the Luan board now supports
16268 ECC generation and checking.
16269
16270 Signed-off-by: Stefan Roese <sr@denx.de>
16271
16272commit 7187db73491c8de0fb56efb5e5134ba5ec443089
16273Author: Stefan Roese <sr@denx.de>
16274Date: Fri Jun 1 13:45:00 2007 +0200
16275
16276 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
16277
16278 Add config option for 180 degree advance clock control as needed
16279 for the AMCC Luan eval board.
16280
16281 Signed-off-by: Stefan Roese <sr@denx.de>
16282
16283commit ee1529838abbfaa35f14e3ffbeaaba693159475f
16284Author: Wolfgang Denk <wd@denx.de>
16285Date: Thu May 31 17:20:09 2007 +0200
16286
16287 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
16288
16289 Signed-off-by: Wolfgang Denk <wd@denx.de>
16290
16291commit 7049288fb1f16f1b317140226cdebd07bd416395
16292Author: Bartlomiej Sieka <tur@semihalf.com>
16293Date: Sun May 27 17:26:46 2007 +0200
16294
16295 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
16296
16297 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16298
16299commit 4520fd4d2c450da49637216aa0e53739b61c60ac
16300Author: Bartlomiej Sieka <tur@semihalf.com>
16301Date: Sun May 27 17:06:36 2007 +0200
16302
16303 Motion-PRO: Add support for redundant environment.
16304
16305 Enable redundant environment, add a MTD partition for it; also add env.
16306 variable command for passing MTD partitions to the kernel command line.
16307
16308 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16309 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16310
16311commit a26eabeec31746f06d309103690892805696e344
16312Author: Bartlomiej Sieka <tur@semihalf.com>
16313Date: Sun May 27 17:05:11 2007 +0200
16314
16315 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
16316
16317 Allow passing longer command line to the kernel - useful especially
16318 for passing MTD partition layout.
16319
16320 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16321 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16322
16323commit 9160b96f71483a116de81c68985e8ee306d36764
16324Author: Bartlomiej Sieka <tur@semihalf.com>
16325Date: Sun May 27 17:04:18 2007 +0200
16326
16327 Fix: Add missing NULL termination in strings expanded by macros parser.
16328
16329 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16330 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16331
16332commit 630ec84aef7228fc1dbfb38dec78541403a786cd
16333Author: Bartlomiej Sieka <tur@semihalf.com>
16334Date: Sun May 27 17:03:37 2007 +0200
16335
16336 Motion-PRO: Update EEPROM's page write bits and write delay.
16337
16338 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
16339 have a page write capability of two bytes", and "This device offers fast (1ms)
16340 byte write". Add 3ms of extra delay.
16341
16342 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16343 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16344
16345commit c00125e07c1ebc125bab40e1e18bceed8be0c162
16346Author: Bartlomiej Sieka <tur@semihalf.com>
16347Date: Sun May 27 16:58:45 2007 +0200
16348
16349 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
16350
16351 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
16352 networking does not function. This commit switches PHY to TX mode by clearing
16353 the FX_SEL bit of Mode Control Register. It also reverses commit
16354 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
16355
16356 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16357 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16358
16359commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
16360Author: Bartlomiej Sieka <tur@semihalf.com>
16361Date: Sun May 27 16:57:15 2007 +0200
16362
16363 Motion-PRO: Add support for the temperature sensor.
16364
16365 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16366 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16367
16368commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
16369Author: Bartlomiej Sieka <tur@semihalf.com>
16370Date: Sun May 27 16:55:23 2007 +0200
16371
16372 Motion-PRO: Add displaying of CPLD revision information during boot.
16373
16374 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
16375 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16376
16377commit c99512d6bd3973f01ca2fc4896d829b46e68f150
16378Author: Bartlomiej Sieka <tur@semihalf.com>
16379Date: Sun May 27 16:53:43 2007 +0200
16380
16381 MPC5xxx: Change names of defines related to IPB and PCI clocks.
16382
16383 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
16384 them does not cause PCI or IPB clocks to run at the specified speed.
16385 Instead, they configure divisors used to calculate said clocks. This
16386 patch renames the defines according to their real function.
16387
16388 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16389 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16390
16391commit a11c0b85dc3664bb3c1e781137118730c8f619ab
16392Author: Bartlomiej Sieka <tur@semihalf.com>
16393Date: Sun May 27 16:51:48 2007 +0200
16394
16395 Motion-PRO: Add LED support.
16396
16397 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
16398 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
16399 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16400
Wolfgang Denka5a38f42007-08-16 11:51:04 +020016401commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
16402Author: Ulf Samuelsson <ulf@atmel.com>
16403Date: Thu May 24 12:12:47 2007 +0200
16404
16405 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
16406
16407 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
16408 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16409 Signed-off-by: Stefan Roese <sr@denx.de>
16410
Wolfgang Denk725671c2007-06-06 16:26:56 +020016411commit d756894722c888d09a9fa1df8323753772d3dcce
16412Author: Stefan Roese <sr@denx.de>
16413Date: Thu May 24 09:49:00 2007 +0200
16414
16415 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
16416
16417 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
16418 fixes a small bug in the 405EZ OCM initialization. Thanks for
16419 spotting.
16420
16421 Signed-off-by: Stefan Roese <sr@denx.de>
16422
16423commit 5d4a179013d59a76446462e1eb0a969fba63eb81
16424Author: Stefan Roese <sr@denx.de>
16425Date: Thu May 24 08:22:09 2007 +0200
16426
16427 ppc4xx: Update AMCC Acadia support for board revision 1.1
16428
16429 This patch updates the Acadia (405EZ) support for the new 1.1 board
16430 revision. It also adds support for NAND FLASH via the 4xx NDFC.
16431
16432 Please note that the jumper J7 must be in position 2-3 for this
16433 NAND support. Position 1-2 is for NAND booting only. NAND booting
16434 support will follow later.
16435
16436 Signed-off-by: Stefan Roese <sr@denx.de>
16437
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020016438commit 822d55365bb557e084d0e33625a6dedcc866110b
16439Author: Jon Loeliger <jdl@freescale.com>
16440Date: Wed May 23 14:09:46 2007 -0500
16441
16442 Add LIST_86xx MAKEALL target for PowerPC builds.
16443
16444 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16445
Wolfgang Denk725671c2007-06-06 16:26:56 +020016446commit 9f0077abd69f7a7c756a915b961037302be3e6f2
16447Author: Stefan Roese <sr@denx.de>
16448Date: Tue May 22 12:48:09 2007 +0200
16449
16450 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
16451
16452 Signed-off-by: Stefan Roese <sr@denx.de>
16453
16454commit 6f3dfc139a838b0841c151efe00ad47db2366e79
16455Author: Stefan Roese <sr@denx.de>
16456Date: Tue May 22 12:46:10 2007 +0200
16457
16458 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
16459
16460 This patch adds support for 405 PPC's to the 4xx NAND driver
16461 ndfc.c. This is in preparation for the new AMCC 405EZ.
16462
16463 Signed-off-by: Stefan Roese <sr@denx.de>
16464
16465commit 10603d76767426be803dadd4fb688b97eb69481c
16466Author: Stefan Roese <sr@denx.de>
16467Date: Mon May 21 07:41:22 2007 +0200
16468
16469 ppc4xx: Fix problem in 405EZ OCM initialization
16470
16471 As spotted by Bruce Adler this patch fixes an initialization problem
16472 for the 405EZ OCM.
16473
16474 Signed-off-by: Stefan Roese <sr@denx.de>
16475
16476commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
16477Author: Peter Pearse <peter.pearse@arm.com>
16478Date: Fri May 18 16:47:03 2007 +0100
16479
16480 Reduce line lengths to 80 characters max.
16481
16482commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
16483Author: Peter Pearse <peter.pearse@arm.com>
16484Date: Fri May 18 14:34:07 2007 +0100
16485
16486 Makefile permissions
16487
16488commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
16489Author: Peter Pearse <peter.pearse@arm.com>
16490Date: Fri May 18 14:33:11 2007 +0100
16491
16492 Makefile permissions
16493
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020016494commit 255a3577c848706441daee0174543efe205a77f8
16495Author: Kim Phillips <kim.phillips@freescale.com>
16496Date: Wed May 16 16:52:19 2007 -0500
16497
16498 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
16499
16500 For all practical u-boot purposes, TSECs don't differ throughout the
16501 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
16502
16503 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16504
Wolfgang Denk725671c2007-06-06 16:26:56 +020016505commit 70124c2602ae2d4c5d3dba05b482d91548242de8
16506Author: Stefano Babic <sbabic@denx.de>
16507Date: Wed May 16 14:49:12 2007 +0200
16508
16509 Fix compile problem cause my Microblaze merge
16510
16511 Signed-off-by: Stefano Babic <sbabic@denx.de>
16512
16513commit ada4697d0230d6da552867777f98a67ec3ba2579
16514Author: Jeffrey Mann <mannj@embeddedplanet.com>
16515Date: Wed May 16 13:23:10 2007 +0200
16516
16517 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
16518
16519 Because the Sequoia board does not boot with an EBC faster than 66MHz,
16520 the clock divider are changed after the initial boot process.
16521
16522 This allows for maximum clocking speeds to be achieved on newer boards.
16523 Sequoia boards with 666.66 MHz processors require that the EBC divider
16524 be set to 3 in order to start the initial boot process at a slower EBC
16525 speed. After the initial boot process, the divider can be set back to 2,
16526 which will cause the boards to run at 83.333MHz. This is backward
16527 compatible with boards with 533.33 MHz processors, as these boards will
16528 already be set with an EBC divider of 2.
16529
16530 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16531
16532commit a7676ea7732f3c596805079fed7e5c9fac652cfc
16533Author: Wolfgang Denk <wd@denx.de>
16534Date: Wed May 16 01:16:53 2007 +0200
16535
16536 Minor Coding Style cleanup, update CHANGELOG.
16537
16538 Signed-off-by: Wolfgang Denk <wd@denx.de>
16539
Wolfgang Denka7676ea2007-05-16 01:16:53 +020016540commit d62f64cc23a940eafe712c776b3249e4160753d1
16541Author: Wolfgang Denk <wd@denx.de>
16542Date: Wed May 16 00:13:33 2007 +0200
16543
16544 Coding Style Cleanup, new CHANGELOG
16545
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020016546commit 3162eb836903c8b247fdc7470dd39bfa6996f495
16547Author: Wolfgang Denk <wd@denx.de>
16548Date: Tue May 15 23:38:05 2007 +0200
16549
16550 Minor coding style cleanup.
16551
16552commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
16553Author: mushtaq khan <mushtaq_k@procsys.com>
16554Date: Fri Apr 20 14:23:02 2007 +0530
16555
16556 Add driver for S-ATA-controller on Intel processors with South
16557 Bridge, ICH-5, ICH-6 and ICH-7.
16558
16559 Implementation:
16560
16561 1. Code is divided in to two files. All functions, which are
16562 controller specific are kept in "drivers/ata_piix.c" file and
16563 functions, which are not controller specific, are kept in
16564 "common/cmd_sata.c" file.
16565
16566 2. Reading and Writing from the S-ATA drive is done using PIO method.
16567
16568 3. Driver can be configured for 48-bit addressing by defining macro
16569 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
16570 addressing.
16571
16572 4. S-ATA read function is hooked to the File system, commands like
16573 ext2ls and ext2load file can be used. This has been tested.
16574
16575 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
16576 controller and identifies the S-ATA drives connected to it.
16577
16578 6. U-Boot command "sata" is added, which is used to read/write, print
16579 partition table and get info about the drives present. This I have
16580 implemented in same way as "ide" command is implemented in U-Boot.
16581
16582 7. This driver is for S-ATA in native mode.
16583
16584 8. This driver does not support the Native command queuing and
16585 Hot-plugging.
16586
16587 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
16588
16589commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
16590Author: mushtaq khan <mushtaq_k@procsys.com>
16591Date: Mon Apr 30 15:57:22 2007 +0530
16592
16593 Fixes bug clearing the bss section for i386
16594
16595 Hi,
16596 There is a bug in the code of clearing the bss section for processor
16597 i386.(File: cpu/i386/start.S)
16598 In the code, bss_start addr (starting addr of bss section) is put into
16599 the register %eax, but the code which clears the bss section refers to
16600 the addr pointed by %edi.
16601
16602 This patch fixes this bug by putting bss_start into %edi register.
16603
16604 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
16605
16606commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
16607Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
16608Date: Mon Apr 30 16:47:28 2007 -0500
16609
16610 Add support for BCM5464 Quad Phy
16611
16612 Added support for Broadcom's BCM5464 Quad Phy
16613
16614 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
16615
16616commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
16617Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
16618Date: Wed May 9 08:10:57 2007 +0800
16619
16620 Search the exception table with linear algorithm
16621
16622 Search the exception table with linear algorithm instead of
16623 bisecting algorithm.
16624 Because the exception table might be unsorted.
16625
16626 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16627
16628commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
16629Author: Aubrey.Li <aubrey.adi@gmail.com>
16630Date: Mon May 14 11:47:35 2007 +0800
16631
16632 Fix compilation issues on MACOSX
16633
16634 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
16635 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
16636
16637commit 56fd7162985c412317bbf763a225fba23c64fd31
16638Author: Stephen Williams <steve@icarus.com>
16639Date: Tue May 15 07:55:42 2007 -0700
16640
16641 Fix for compile of JSE target
16642
16643 The attached patch fixes the compile of the JSE board in the
16644 denx git as of 14 may 2007. It is an extremely simple patch,
16645 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
16646
16647 Fix to compile JSE against 20070514 git of u-boot
16648
Wolfgang Denk61fb15c52007-12-27 01:52:50 +010016649commit 69df3c4da0c93017cceb25a366e794570bd0ed98
16650Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
16651Date: Sun May 13 21:01:03 2007 +0900
16652
16653 sh: MS7750SE support.
16654
16655 This adds support for the Hitachi MS7750SE.
16656
16657 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16658
16659commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
16660Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
16661Date: Sun May 13 20:58:00 2007 +0900
16662
16663 sh: First support code of SuperH.
16664
16665 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16666
Wolfgang Denk725671c2007-06-06 16:26:56 +020016667commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
16668Author: Stefan Roese <sr@denx.de>
16669Date: Fri May 11 12:01:49 2007 +0200
16670
16671 ppc4xx: Add mtcpr/mfcpr access macros
16672
16673 Signed-off-by: Stefan Roese <sr@denx.de>
16674
16675commit 343c48bd84606c4025c8a7c7263fda465d6e284c
16676Author: Stefan Roese <sr@denx.de>
16677Date: Fri May 11 12:01:06 2007 +0200
16678
16679 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
16680
16681 Signed-off-by: Stefan Roese <sr@denx.de>
16682
Wolfgang Denkd62f64c2007-05-16 00:13:33 +020016683commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
16684Author: Piotr Kruszynski <ppk@semihalf.com>
16685Date: Thu May 10 16:55:52 2007 +0200
16686
16687 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
16688 definition.
16689
Wolfgang Denk725671c2007-06-06 16:26:56 +020016690commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
16691Author: Peter Pearse <peter.pearse@arm.com>
16692Date: Wed May 9 11:42:44 2007 +0100
16693
16694 Add the board directory for SMN42
16695
16696commit 160131bf965785419626df6c388729fe0b597992
16697Author: Peter Pearse <peter.pearse@arm.com>
16698Date: Wed May 9 11:41:58 2007 +0100
16699
16700 Add the files for the SMN42 board
16701
16702commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
16703Author: Peter Pearse <peter.pearse@arm.com>
16704Date: Wed May 9 11:40:34 2007 +0100
16705
16706 Remove the deleted files for the SMN42 patch
16707
16708commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
16709Author: Peter Pearse <peter.pearse@arm.com>
16710Date: Wed May 9 11:37:56 2007 +0100
16711
16712 New board SMN42 branch
16713
16714commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
16715Author: Peter Pearse <peter.pearse@arm.com>
16716Date: Wed May 9 10:24:38 2007 +0100
16717
16718 Makefile permissions
16719
16720commit b84289b595731e8851df46e893845cc1322c9b9b
16721Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16722Date: Tue May 8 14:17:07 2007 -0500
16723
16724 8641hpcn: Fix Makefile after moving pixis to board/freescale.
16725
16726 The OBJTREE != SRCTREE build scenario was broken.
16727 This fixes it.
16728
16729 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16730 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16731
Wolfgang Denkd62f64c2007-05-16 00:13:33 +020016732commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
16733Author: Michal Simek <monstr@monstr.eu>
16734Date: Tue May 8 15:57:43 2007 +0200
16735
16736 add: reading special purpose registers
16737
16738commit 1a50f164beb065f360fbddb76029607d6b099698
16739Author: Michal Simek <monstr@monstr.eu>
16740Date: Tue May 8 14:52:52 2007 +0200
16741
16742 add: Microblaze V5 exception handling
16743
16744commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
16745Author: Michal Simek <monstr@monstr.eu>
16746Date: Tue May 8 14:39:11 2007 +0200
16747
16748 add: FSL control read and write
16749
16750commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
16751Author: Piotr Kruszynski <ppk@semihalf.com>
16752Date: Tue May 8 13:05:44 2007 +0200
16753
16754 [Motion-PRO] Add support for I2C, EEPROM and RTC.
16755
16756commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
16757Author: Bartlomiej Sieka <tur@semihalf.com>
16758Date: Tue May 8 10:23:56 2007 +0200
16759
16760 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
16761 environment.
16762
16763commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
16764Author: Bartlomiej Sieka <tur@semihalf.com>
16765Date: Tue May 8 09:39:12 2007 +0200
16766
16767 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
16768 eliminates networking problems in Linux (timeouts).
16769
16770commit 1f1369c34b629be94702684d41d3fddf0f6193e7
16771Author: Bartlomiej Sieka <tur@semihalf.com>
16772Date: Tue May 8 09:21:57 2007 +0200
16773
16774 [Motion-PRO] Enable Flat Device Tree support and modify default environment
16775 to allow booting of FDT-expecting kernels.
16776
16777commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
16778Author: Michal Simek <monstr@monstr.eu>
16779Date: Mon May 7 23:58:31 2007 +0200
16780
16781 new: USE_MSR_INTR support
16782
16783commit 008861a2f3ef2c062744d733787c7e530a1b8761
16784Author: Bartlomiej Sieka <tur@semihalf.com>
16785Date: Mon May 7 22:36:15 2007 +0200
16786
16787 [MPC5xxx] There are networking problems on the Motion-PRO board with
16788 current PHY initalization code (tftp timeouts all the time). This commit
16789 temporarily disables PHY initalization sequence to make the networking
16790 operational, until a fix is found.
16791
16792commit abca901869c3760b6c5fecb825db6c1d91a78a93
16793Author: Wolfgang Denk <wd@denx.de>
16794Date: Mon May 7 22:10:36 2007 +0200
16795
16796 Get rid of duplicated file (see include/configs/sbc8560.h instead)
16797
16798 Signed-off-by: Wolfgang Denk <wd@denx.de>
16799
16800commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
16801Author: Wolfgang Denk <wd@denx.de>
16802Date: Mon May 7 22:07:08 2007 +0200
16803
16804 Get rid of duplicated file (see doc/README.SBC8560 instead)
16805
16806 Signed-off-by: Wolfgang Denk <wd@denx.de>
16807
16808commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
16809Author: Michal Simek <monstr@monstr.eu>
16810Date: Mon May 7 19:43:10 2007 +0200
16811
16812 fix: read and write MSR - repair number of parameters
16813
Wolfgang Denk725671c2007-06-06 16:26:56 +020016814commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
16815Author: Jeffrey Mann <mannj@embeddedplanet.com>
16816Date: Mon May 7 19:42:49 2007 +0200
16817
16818 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
16819
16820 A '3' got cut off in the formatting of the last patch to automatically
16821 change the clock speed of the system clock on sequoia board.
16822
16823 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16824 Signed-off-by: Stefan Roese <sr@denx.de>
16825
Wolfgang Denkd62f64c2007-05-16 00:13:33 +020016826commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
16827Author: Michal Simek <monstr@monstr.eu>
16828Date: Mon May 7 19:33:51 2007 +0200
16829
16830 new: fsl interrupt support
16831 FSL_Has_data is connected to INTC.
16832
16833commit 792032baa7d625e34c981ab6df521911bd8dc861
16834Author: Michal Simek <monstr@monstr.eu>
16835Date: Mon May 7 19:30:12 2007 +0200
16836
16837 fix: interrupt handler
16838 remove asm code
16839
16840commit f3f001a341ef185d0f13841be5b5dc3395aacc31
16841Author: Michal Simek <monstr@monstr.eu>
16842Date: Mon May 7 19:25:08 2007 +0200
16843
16844 fix: remove asm code
16845
16846commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
16847Author: Michal Simek <monstr@monstr.eu>
16848Date: Mon May 7 19:12:43 2007 +0200
16849
16850 fix: clean interrupt
16851
16852commit 42efed6130c8fcf7da881385b5427065d2801757
16853Author: Michal Simek <monstr@monstr.eu>
16854Date: Mon May 7 17:22:25 2007 +0200
16855
16856 fix: interrupt handler for multiple sources
16857
16858commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
16859Author: Michal Simek <monstr@monstr.eu>
16860Date: Mon May 7 17:11:09 2007 +0200
16861
16862 new: add writing to msr register
16863
Wolfgang Denk9986bc32007-08-12 21:34:50 +020016864commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
16865Author: Markus Klotzbuecher <mk@denx.de>
16866Date: Mon May 7 16:43:56 2007 +0200
16867
16868 Fix an ancient CHANGELOG conflict
16869
Wolfgang Denkd62f64c2007-05-16 00:13:33 +020016870commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
16871Author: Timur Tabi <timur@freescale.com>
16872Date: Sat May 5 08:12:30 2007 +0200
16873
16874 5xxx: write MAC address to mac-address and local-mac-address
16875
16876 Some device trees have a mac-address property, some have local-mac-address,
16877 and some have both. To support all of these device trees, ftp_cpu_setup()
16878 should write the MAC address to mac-address and local-mac-address, if they
16879 exist.
16880
16881 Signed-off-by: Timur Tabi <timur@freescale.com>
16882 Acked-by: Grant Likely <grant.likely@secretlab.ca>
16883
16884commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
16885Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
16886Date: Sun Apr 29 14:01:54 2007 +0200
16887
16888 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
16889
16890 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
16891 message. Use PVR to distinguish between the two variants, and print proper CPU
16892 information.
16893
16894 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
16895 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16896 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16897
16898commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
16899Author: Ladislav Michl <ladis@linux-mips.org>
16900Date: Wed Apr 25 16:01:26 2007 +0200
16901
16902 [PATCH] simplify silent console
16903
16904 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16905 Acked-by: Stefan Roese <sr@denx.de>
16906
16907commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
16908Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16909Date: Mon Apr 23 15:30:39 2007 +0200
16910
16911 [PATCH] Avoid assigning PCI resources from zero address
16912
16913 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
16914 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
16915 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
16916 sentence about "0" being considered an invalid address) -- so, use a reasonable
16917 starting value of 0x1000 (that's what the most Linux archs are using).
16918
16919 Alternatively, one might have fixed the calls to pci_set_region() individually
16920 (some code even seems to have taken care of this issue) but that would have
16921 been a lot more work. :-)
16922
16923 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16924 Acked-by: Stefan Roese <sr@denx.de>
16925
16926commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
16927Author: Jeffrey Mann <mannj@embeddedplanet.com>
16928Date: Mon Apr 23 14:00:11 2007 +0200
16929
16930 [patch] setenv(...) can delete environmentalvariables
16931
16932 update setenv() function so that entering a NULL value for the
16933 variable's value will delete the environmental variable
16934
16935 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16936 Acked-by: Stefan Roese <sr@denx.de>
16937
16938commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
16939Author: Mike Frysinger <vapier@gentoo.org>
16940Date: Mon Apr 23 13:54:24 2007 +0200
16941
16942 [patch] use unsigned char in smc91111 driver for mac
16943
16944 the v_mac variable in the smc91111 driver is declared as a signed char ...
16945 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
16946 because when it gets printed out, you get a display like:
16947 0xFFFFFFE0 and that's no good
16948
16949 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16950
16951commit ffc50f9bb194343c6303517a517708457a5eb6b8
16952Author: Michal Simek <monstr@monstr.eu>
16953Date: Sat May 5 18:54:42 2007 +0200
16954
16955 new: FSL and MSR support #2
16956
16957commit f7e2e0eb0668136305f78bb9c21be79b48a34247
16958Author: Michal Simek <monstr@monstr.eu>
16959Date: Sat May 5 18:27:16 2007 +0200
16960
16961 new: FSL and MSR support
16962
16963commit 2f15278c2eb911c668b4fe562130b78cf554d139
16964Author: Wolfgang Denk <wd@denx.de>
16965Date: Sat May 5 18:23:11 2007 +0200
16966
16967 Coding stylke cleanup; update CHANGELOG.
16968
16969 Signed-off-by: Wolfgang Denk <wd@denx.de>
16970
Wolfgang Denk2f152782007-05-05 18:23:11 +020016971commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
16972Author: Wolfgang Denk <wd@denx.de>
16973Date: Sat May 5 18:05:02 2007 +0200
16974
16975 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
16976
16977 Signed-off-by: Wolfgang Denk <wd@denx.de>
16978
Wolfgang Denk885ec892007-05-05 18:05:02 +020016979commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
16980Author: Wolfgang Denk <wd@denx.de>
16981Date: Sat May 5 17:15:50 2007 +0200
16982
16983 Make "file" command happy with some config.mk files; update CHANGELOG
16984
Wolfgang Denk2f152782007-05-05 18:23:11 +020016985commit e3b8c78bc2489c27ae020986ef0eaca684866cef
16986Author: Jeffrey Mann <mannj@embeddedplanet.com>
16987Date: Sat May 5 08:32:14 2007 +0200
16988
16989 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
16990
16991 The AMCC Secquoia board has been changed in a new revision from using a
16992 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
16993 indicates the difference. This patch reads that bit and uses the correct
16994 clock speed for the board. This code is backward compatable will all
16995 prior boards. All prior boards will be read as 33.000.
16996
16997 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16998 Signed-off-by: Stefan Roese <sr@denx.de>
16999
17000commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
17001Author: Stefan Roese <sr@denx.de>
17002Date: Sat May 5 08:29:01 2007 +0200
17003
17004 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
17005
17006 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
17007 for the 4k NAND boot image so define bus_frequency to 133MHz here
17008 which is save for the refresh counter setup.
17009
17010 Signed-off-by: Stefan Roese <sr@denx.de>
17011
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020017012commit 2f550ab976405300f5b07bf2890800840d0aa05f
17013Author: Timur Tabi <timur@freescale.com>
17014Date: Sat May 5 08:12:30 2007 +0200
17015
17016 5xxx: write MAC address to mac-address and local-mac-address
17017
17018 Some device trees have a mac-address property, some have local-mac-address,
17019 and some have both. To support all of these device trees, ftp_cpu_setup()
17020 should write the MAC address to mac-address and local-mac-address, if they
17021 exist.
17022
17023 Signed-off-by: Timur Tabi <timur@freescale.com>
17024 Acked-by: Grant Likely <grant.likely@secretlab.ca>
17025
Wolfgang Denk54996452007-05-05 17:15:50 +020017026commit a79886590593ba1d667c840caa4940c61639f18f
17027Author: Thomas Knobloch <knobloch@siemens.com>
17028Date: Sat May 5 07:04:42 2007 +0200
17029
17030 NAND: Wrong calculation of page number in nand_block_bad()
17031
17032 In case that there is no memory based bad block table available the
17033 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
17034 nand_block_bad() directly. When parameter 'getchip' is set to zero,
17035 nand_block_bad() will not right shift the offset to calculate the
17036 correct page number.
17037
17038 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
17039 Signed-off-by: Stefan Roese <sr@denx.de>
17040
17041commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
17042Author: Wolfgang Denk <wd@denx.de>
17043Date: Fri May 4 10:02:33 2007 +0200
17044
17045 Fix initrd length corruption in bootm command.
17046
17047 When using FDT Images, the length of an inital ramdisk was
17048 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
17049
17050 Patches by Timur Tabi & Johns Daniel.
17051
17052 Signed-off-by: Wolfgang Denk <wd@denx.de>
17053
Wolfgang Denka7676ea2007-05-16 01:16:53 +020017054commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
17055Author: Kim Phillips <kim.phillips@freescale.com>
17056Date: Thu May 3 19:43:52 2007 -0500
17057
17058 mpc83xx: fix trivial error in MAKEALL
17059
17060 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17061
Wolfgang Denk54996452007-05-05 17:15:50 +020017062commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
17063Author: Wolfgang Denk <wd@denx.de>
17064Date: Thu May 3 16:34:41 2007 +0200
17065
17066 Update board configuration for STX GP3SSA board:
17067
17068 Enable hush shell, environment in flash rather in EEPROM,
17069 more user-friendly default environment, etc.
17070 The simple EEPROM environment can be selected easily in the board
17071 config file.
17072
17073 Signed-off-by: Wolfgang Denk <wd@denx.de>
17074
Wolfgang Denkc64a89d2007-05-03 16:34:41 +020017075commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
17076Author: Wolfgang Denk <wd@denx.de>
17077Date: Tue Apr 24 14:37:49 2007 +0200
17078
17079 Cleanup STX GP3SSA code; fix build and compile problems.
17080
17081commit 35171dc04e028ecacc23ad916a66295472555dbf
17082Author: Dan Malek <dan@embeddedalley.com>
17083Date: Fri Jan 5 09:15:34 2007 +0100
17084
17085 Add support for STX GP3SSA (stxssa) Board
17086
17087 Signed-off-by Dan Malek, <dan@embeddedalley.com>
17088
Wolfgang Denkbe5d72d2007-08-13 21:57:53 +020017089commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
17090Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17091Date: Wed May 2 13:31:53 2007 +0200
17092
17093 macb: Don't restart autonegotiation if we already have link
17094
17095 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
17096 link is already up.
17097
17098 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17099
17100commit 04fcb5d38bc90779cd9a710d60702075986f0e29
17101Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17102Date: Wed May 2 13:22:38 2007 +0200
17103
17104 macb: Introduce a few barriers when dealing with DMA descriptors
17105
17106 There were a few theoretical possibilities that the compiler might
17107 optimize away DMA descriptor reads and/or writes and thus cause
17108 synchronization problems with the hardware. Insert barriers where
17109 we depend on reads/writes actually hitting memory.
17110
17111 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17112
Wolfgang Denk885ec892007-05-05 18:05:02 +020017113commit ffa621a0d12a1ccd81c936c567f8917a213787a8
17114Author: Andy Fleming <afleming@freescale.com>
17115Date: Sat Feb 24 01:08:13 2007 -0600
17116
17117 Cleaned up some 85xx PCI bugs
17118
17119 * Cleaned up the CDS PCI Config Tables and added NULL entries to
17120 the end
17121 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
17122 * Fixed 85xx PCI code to assign powar region sizes based on the
17123 config values (rather than hard-coding them)
17124 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
17125
17126 Signed-off-by: Andy Fleming <afleming@freescale.com>
17127
17128commit 6743105988fc44d5b0d30388c790607835aae7a6
17129Author: Andy Fleming <afleming@freescale.com>
17130Date: Mon Apr 23 02:54:25 2007 -0500
17131
17132 Add support for the 8568 MDS board
17133
17134 This included some changes to common files:
17135 * Add 8568 processor SVR to various places
17136 * Add support for setting the qe bus-frequency value in the dts
17137 * Add the 8568MDS target to the Makefile
17138
17139 Signed-off-by: Andy Fleming <afleming@freescale.com>
17140
17141commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
17142Author: David Updegraff <dave@cray.com>
17143Date: Fri Apr 20 14:34:48 2007 -0500
17144
17145 Add support for treating unknown PHYs as generic PHYs.
17146
17147 When bringing up u-boot on new boards, PHY support sometimes gets
17148 neglected. Most PHYs don't really need any special support,
17149 though. By adding a generic entry that always matches if nothing
17150 else does, we can provide support for "unsupported" PHYs for the
17151 tsec.
17152
17153 The generic PHY driver supports most PHYs, including gigabit.
17154
17155 Signed-off-by: David Updegraff <dave@cray.com>
17156 Signed-off-by: Andy Fleming <afleming@freescale.com>
17157
Wolfgang Denk54996452007-05-05 17:15:50 +020017158commit a75af9bfd8fff0499efdbb90601cec5a2afef117
17159Author: James Yang <James.Yang@freescale.com>
17160Date: Wed Feb 7 15:28:04 2007 -0600
17161
17162 Conditionalize 8641 Rev1.0 MCM workarounds
17163
17164 Signed-off-by: James Yang <James.Yang@freescale.com>
17165 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17166
Wolfgang Denka7676ea2007-05-16 01:16:53 +020017167commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
17168Author: Timur Tabi <timur@freescale.com>
17169Date: Mon Apr 30 13:59:50 2007 -0500
17170
17171 Fix memory initialization on MPC8349E-mITX
17172
17173 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
17174 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
17175 on some ITX boards, notably those with a revision 3.1 CPU.
17176
17177 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
17178 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
17179
17180 Signed-off-by: Timur Tabi <timur@freescale.com>
17181 Acked-by: Michael Benedict <MBenedict@twacs.com>
17182 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17183
17184commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
17185Author: Kim Phillips <kim.phillips@freescale.com>
17186Date: Mon Apr 30 15:26:21 2007 -0500
17187
17188 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
17189
17190 and fix CPU: to align with Board: display text.
17191
17192 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17193
Wolfgang Denk54996452007-05-05 17:15:50 +020017194commit c1ab82669d9525998c34e802a12cad662723f22a
17195Author: James Yang <James.Yang@freescale.com>
17196Date: Fri Mar 16 13:02:53 2007 -0500
17197
17198 Rewrote picos_to_clk() to avoid rounding errors.
17199 Clarified that conversion is to DRAM clocks rather than platform clocks.
17200 Made function static to spd_sdram.c.
17201
17202 Signed-off-by: James Yang <James.Yang@freescale.com>
17203 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17204
Wolfgang Denk2f152782007-05-05 18:23:11 +020017205commit 8b39501d28754e72726ce7fb02310e56dbdf116a
17206Author: Stefan Roese <sr@denx.de>
17207Date: Sun Apr 29 14:13:01 2007 +0200
17208
17209 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
17210
17211 Signed-off-by: Stefan Roese <sr@denx.de>
17212
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020017213commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
17214Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
17215Date: Sun Apr 29 14:01:54 2007 +0200
17216
17217 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
17218
17219 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
17220 message. Use PVR to distinguish between the two variants, and print proper CPU
17221 information.
17222
17223 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
17224 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17225 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
17226
Wolfgang Denka7676ea2007-05-16 01:16:53 +020017227commit 5c5d3242935cf3543af01142627494434834cf98
17228Author: Kim Phillips <kim.phillips@freescale.com>
17229Date: Wed Apr 25 12:34:38 2007 -0500
17230
17231 mpc83xx: minor fixups for 8313rdb introduction
17232
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020017233commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
17234Author: Ladislav Michl <ladis@linux-mips.org>
17235Date: Wed Apr 25 16:01:26 2007 +0200
17236
17237 [PATCH] simplify silent console
17238
17239 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
17240 Acked-by: Stefan Roese <sr@denx.de>
17241
Wolfgang Denkd62f64c2007-05-16 00:13:33 +020017242commit 144876a380f5756f57412caf74c1d6dc201dd796
17243Author: Michal Simek <monstr@monstr.eu>
17244Date: Tue Apr 24 23:01:02 2007 +0200
17245
17246 [PATCH] MTD partition support, JFFS2 support
17247
Wolfgang Denk2f152782007-05-05 18:23:11 +020017248commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
17249Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17250Date: Tue Apr 24 14:03:45 2007 +0200
17251
17252 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
17253
17254 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17255
Wolfgang Denk885ec892007-05-05 18:05:02 +020017256commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
17257Author: Andy Fleming <afleming@freescale.com>
17258Date: Mon Apr 23 02:37:47 2007 -0500
17259
17260 Reworked 85xx speed detection code
17261
17262 Changed the code to read the registers and calculate the clock
17263 rates, rather than using a "switch" statement.
17264
17265 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
17266
17267 Signed-off-by: Andy Fleming <afleming@freescale.com>
17268
17269commit 81f481ca708ed6a56bf9c410e3191dbad581c565
17270Author: Andy Fleming <afleming@freescale.com>
17271Date: Mon Apr 23 02:24:28 2007 -0500
17272
17273 Enable 8544 support
17274
17275 * Add support to the Makefile
17276 * Add 8544 configuration support to the tsec driver
17277 * Add 8544 SVR numbers to processor.h
17278
17279 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17280 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17281
17282commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
17283Author: Andy Fleming <afleming@freescale.com>
17284Date: Fri Feb 23 17:12:25 2007 -0600
17285
17286 Support 1G size on 8548
17287
17288 e500v2 and newer cores support 1G page sizes.
17289
17290 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17291 Signed-off-by: Andy Fleming <afleming@freescale.com>
17292
17293commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
17294Author: Andy Fleming <afleming@freescale.com>
17295Date: Fri Feb 23 17:11:16 2007 -0600
17296
17297 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
17298
17299 The other pagesz constants use one letter to specify order of
17300 magnitude. Also change the one reference to it in mpc8548cds/init.S
17301
17302 Signed-off-by: Andy Fleming <afleming@freescale.com>
17303
17304commit 1f9a318cea14272edd10d63739e2d326c90f430e
17305Author: Andy Fleming <afleming@freescale.com>
17306Date: Fri Feb 23 16:28:46 2007 -0600
17307
17308 Only set ddrioovcr for 8548 rev1.
17309
17310 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17311 Signed-off-by: Andy Fleming <afleming@freescale.com>
17312
17313commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
17314Author: Andy Fleming <afleming@freescale.com>
17315Date: Sat Feb 24 01:16:45 2007 -0600
17316
17317 Tweak DDR ECC error counter
17318
17319 Enable single-bit error counter when memory was cleared by ddr controller.
17320
17321 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17322 Signed-off-by: Andy Fleming <afleming@freescale.com>
17323
17324commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
17325Author: Timur Tabi <timur@freescale.com>
17326Date: Mon Feb 12 13:34:55 2007 -0600
17327
17328 85xx: write MAC address to mac-address and local-mac-address
17329
17330 Some device trees have a mac-address property, some have local-mac-address,
17331 and some have both. To support all of these device trees, ftp_cpu_setup()
17332 should write the MAC address to mac-address and local-mac-address, if they
17333 exist.
17334
17335 Signed-off-by: Timur Tabi <timur@freescale.com>
17336
17337commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
17338Author: Andy Fleming <afleming@freescale.com>
17339Date: Mon Apr 23 01:44:44 2007 -0500
17340
17341 Some 85xx cpu cleanups
17342
17343 * Cleaned up the TSR[WIS] clearing
17344 * Cleaned up DMA initialization
17345
17346 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17347 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17348 Acked-by: Andy Fleming <afleming@freescale.com>
17349
17350commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
17351Author: Andy Fleming <afleming@freescale.com>
17352Date: Mon Apr 23 01:32:22 2007 -0500
17353
17354 Add cpu support for the 8544
17355
17356 Recognize new SVR values, and add a few register definitions
17357
17358 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17359 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17360 Acked-by: Andy Fleming <afleming@freescale.com>
17361
17362commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
17363Author: Jon Loeliger <jdl@freescale.com>
17364Date: Wed Apr 11 16:51:02 2007 -0500
17365
17366 Add MPC8544DS basic port board files.
17367
17368 Add board port under new board/freescale directory
17369 structure and reuse existing PIXIS FPGA support there.
17370
17371 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17372 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17373
17374commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
17375Author: Jon Loeliger <jdl@freescale.com>
17376Date: Wed Apr 11 16:50:57 2007 -0500
17377
17378 Add MPC8544DS main configuration file.
17379
17380 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17381 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17382
17383commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
17384Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17385Date: Wed Dec 27 22:07:15 2006 +0300
17386
17387 Fix PCI I/O space mapping on Freescale MPC85x0ADS
17388
17389 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
17390 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
17391 describing the local address window used for the PCI I/O space accesses -- fix
17392 this and carry over the necessary changes into the MPC8560ADS code since the
17393 PCI I/O space mapping was also broken for this board (by the earlier commit
17394 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
17395 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
17396
17397 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17398
17399 board/mpc8540ads/init.S | 4 ++--
17400 board/mpc8560ads/init.S | 4 ++--
17401 include/configs/MPC8540ADS.h | 5 ++---
17402 include/configs/MPC8541CDS.h | 2 +-
17403 include/configs/MPC8548CDS.h | 2 +-
17404 include/configs/MPC8560ADS.h | 8 ++++----
17405 6 files changed, 12 insertions(+), 13 deletions(-)
17406
17407commit 96629cbabdb727d4a5e62542deefc01d498db6dc
17408Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17409Date: Tue Dec 5 16:42:30 2006 +0800
17410
17411 u-boot: Fix e500 v2 core reset bug
17412
17413 The following patch fixes the e500 v2 core reset bug.
17414 For e500 v2 core, a new reset control register is added to reset the
17415 processor.
17416
17417 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17418
17419commit 63247a5acd58032e6cf33f525bc3923b467bac88
17420Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17421Date: Wed Dec 20 11:01:00 2006 +0800
17422
17423 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
17424
17425 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
17426 entry number to control the loop. This can reduce the potential risk
17427 for the 85xx processor increasing its TLB adn LAW entry number.
17428
17429 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
17430 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17431
17432commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
17433Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17434Date: Mon Dec 18 17:01:04 2006 +0800
17435
17436 u-boot: Fix the 85xxcds tsec bug
17437
17438 Fix the 85xxcds tsec bug.
17439 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
17440
17441 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17442
17443commit 7337b237ffc4aaf1b9467024fe472a880d852598
17444Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17445Date: Fri Dec 15 14:43:31 2006 +0800
17446
17447 u-boot: Fix CPU2 errata on MPC8548CDS board
17448
17449 This patch apply workaround of CPU2 errata on MPC8548CDS board.
17450
17451 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
17452
17453commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
17454Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
17455Date: Mon Dec 18 16:25:15 2006 +0800
17456
17457 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
17458
17459 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
17460
17461 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
17462
17463commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
17464Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17465Date: Thu Dec 14 14:14:55 2006 +0800
17466
17467 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
17468
17469 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
17470 board.
17471 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17472
Wolfgang Denka7676ea2007-05-16 01:16:53 +020017473commit 96b8a05432f346f36493535c85320b70ec9c7c1b
17474Author: Scott Wood <scottwood@freescale.com>
17475Date: Mon Apr 16 14:54:15 2007 -0500
17476
17477 mpc83xx: Add MPC8313ERDB support.
17478
17479 Signed-off-by: Scott Wood <scottwood@freescale.com>
17480
17481commit 49ea3b6eafe606285ae4d5c378026153dde53200
17482Author: Scott Wood <scottwood@freescale.com>
17483Date: Mon Apr 16 14:34:21 2007 -0500
17484
17485 mpc83xx: Add generic PCI setup code.
17486
17487 Board code can now request the generic setup code rather than having to
17488 copy-and-paste it for themselves. Boards should be converted to use this
17489 once they're tested with it.
17490
17491 Signed-off-by: Scott Wood <scottwood@freescale.com>
17492
17493commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
17494Author: Scott Wood <scottwood@freescale.com>
17495Date: Mon Apr 16 14:34:19 2007 -0500
17496
17497 mpc83xx: Add 831x support to speed.c.
17498
17499 Signed-off-by: Scott Wood <scottwood@freescale.com>
17500
17501commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
17502Author: Scott Wood <scottwood@freescale.com>
17503Date: Mon Apr 16 14:34:18 2007 -0500
17504
17505 mpc83xx: Add 831x support to global_data.h
17506
17507 Signed-off-by: Scott Wood <scottwood@freescale.com>
17508
17509commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
17510Author: Scott Wood <scottwood@freescale.com>
17511Date: Mon Apr 16 14:34:16 2007 -0500
17512
17513 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
17514
17515 Rather than misleadingly define PVR_83xx as the specific type of 83xx
17516 being built for, the PVR of each core revision is defined. checkcpu() now
17517 prints the core that it detects, rather than aborting if it doesn't find
17518 what it thinks it wants.
17519
17520 Signed-off-by: Scott Wood <scottwood@freescale.com>
17521
17522commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
17523Author: Scott Wood <scottwood@freescale.com>
17524Date: Mon Apr 16 14:34:15 2007 -0500
17525
17526 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
17527
17528 Signed-off-by: Scott Wood <scottwood@freescale.com>
17529
17530commit d87c57b201b4572d16f1b642998faa00c9912b16
17531Author: Scott Wood <scottwood@freescale.com>
17532Date: Mon Apr 16 14:31:55 2007 -0500
17533
17534 mpc83xx: Add register definitions for MPC831x.
17535
17536 Signed-off-by: Scott Wood <scottwood@freescale.com>
17537
Wolfgang Denk4ef218f2007-07-10 00:01:28 +020017538commit 7fc4c71a143be8666d70803fb25ae60379c95622
17539Author: Stefan Roese <sr@denx.de>
17540Date: Mon Apr 23 15:39:59 2007 +0200
17541
17542 Fix file mode
17543
17544 Signed-off-by: Stefan Roese <sr@denx.de>
17545
17546commit 38257988abfe74d459ca2ad748b109ca04e4efe1
17547Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17548Date: Mon Apr 23 15:30:39 2007 +0200
17549
17550 [PATCH] Avoid assigning PCI resources from zero address
17551
17552 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
17553 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
17554 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
17555 sentence about "0" being considered an invalid address) -- so, use a reasonable
17556 starting value of 0x1000 (that's what the most Linux archs are using).
17557
17558 Alternatively, one might have fixed the calls to pci_set_region() individually
17559 (some code even seems to have taken care of this issue) but that would have
17560 been a lot more work. :-)
17561
17562 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17563 Acked-by: Stefan Roese <sr@denx.de>
17564
17565commit afb903a2eb9436baa9270ccc0c27082d86497d89
17566Author: Jeffrey Mann <mannj@embeddedplanet.com>
17567Date: Mon Apr 23 14:00:11 2007 +0200
17568
17569 [patch] setenv(...) can delete environmentalvariables
17570
17571 update setenv() function so that entering a NULL value for the
17572 variable's value will delete the environmental variable
17573
17574 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
17575 Acked-by: Stefan Roese <sr@denx.de>
17576
17577commit 36f104e5caa747d568eff26b369565af57c2ffa6
17578Author: Mike Frysinger <vapier@gentoo.org>
17579Date: Mon Apr 23 13:54:24 2007 +0200
17580
17581 [patch] use unsigned char in smc91111 driver for mac
17582
17583 the v_mac variable in the smc91111 driver is declared as a signed char ...
17584 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
17585 because when it gets printed out, you get a display like:
17586 0xFFFFFFE0 and that's no good
17587
17588 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
17589
Wolfgang Denk9986bc32007-08-12 21:34:50 +020017590commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
17591Author: Rodolfo Giometti <giometti@enneenne.com>
17592Date: Mon Apr 23 13:10:52 2007 +0200
17593
17594 USB: (Another) delay for crappy USB keys.
17595
17596 Some USB keys are slow in giving back an answer when the Root HUB
17597 enables power lines.
17598
17599 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
17600
Wolfgang Denk54996452007-05-05 17:15:50 +020017601commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
17602Author: Stefan Roese <sr@denx.de>
17603Date: Mon Apr 23 12:00:22 2007 +0200
17604
17605 Remove BOARDLIBS usage completely
17606
17607 Signed-off-by: Stefan Roese <sr@denx.de>
17608
Wolfgang Denkd62f64c2007-05-16 00:13:33 +020017609commit 32556443840f127170e4baa8bdd5b567039f6c36
17610Author: Michal Simek <monstr@monstr.eu>
17611Date: Sat Apr 21 21:07:22 2007 +0200
17612
17613 [PATCH] SystemACE support for Microblaze
17614
17615commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
17616Author: Michal Simek <monstr@monstr.eu>
17617Date: Sat Apr 21 21:02:40 2007 +0200
17618
17619 16bit read/write little endian
17620
17621commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
17622Author: Michal Simek <monstr@monstr.eu>
17623Date: Sat Apr 21 20:53:31 2007 +0200
17624
17625 Change ML401 parameters - Xilinx BSP
17626
Wolfgang Denk54996452007-05-05 17:15:50 +020017627commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
17628Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17629Date: Wed Feb 28 05:37:29 2007 -0600
17630
17631 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
17632
17633 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17634
17635commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
17636Author: Zhang Wei <wei.zhang@freescale.com>
17637Date: Fri Jan 19 10:42:37 2007 +0800
17638
17639 Enable LAWs for MPC8641 PCI-Ex2.
17640
17641 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17642 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17643
17644commit bd7851ce1e1f140665b520026abf1042968b1102
17645Author: Jon Loeliger <jdl@freescale.com>
17646Date: Fri Apr 20 14:12:26 2007 -0500
17647
17648 mpc86xx; Write MAC address to mac-address and local-mac-address
17649
17650 Some device trees have a mac-address property, some have local-mac-address,
17651 and some have both. To support all of these device trees, ftp_cpu_setup()
17652 should write the MAC address to mac-address and local-mac-address, if they
17653 exist.
17654
17655 Signed-off-by: Timur Tabi <timur@freescale.com>
17656 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17657
17658commit 7dbdf28b8bd855a8530dc3292e4982575a197060
17659Author: Jon Loeliger <jdl@freescale.com>
17660Date: Fri Apr 20 14:11:38 2007 -0500
17661
17662 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
17663
17664 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17665 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17666
Wolfgang Denkc64a89d2007-05-03 16:34:41 +020017667commit 14da5f7675bbb427c469e3f45006e027b6e21db9
17668Author: Wolfgang Denk <wd@denx.de>
17669Date: Fri Apr 20 17:43:28 2007 +0200
17670
17671 Cleanup compiler warnings, update CHANGELOG
17672
17673 Signed-off-by: Wolfgang Denk <wd@denx.de>
17674
Wolfgang Denk14da5f72007-04-20 17:43:28 +020017675commit 6923565db12af34fd5e02d354ee65a8c78ac460f
17676Author: Detlev Zundel <dzu@denx.de>
17677Date: Fri Apr 20 12:01:47 2007 +0200
17678
17679 Fix breakage of NC650 board with respect to nand support.
17680
17681 Signed-off-by: Detlev Zundel <dzu@denx.de>
17682
17683commit 39f23cd90947639ac278a18ff277ec786b5ac167
17684Author: Domen Puncer <domen.puncer@telargo.com>
17685Date: Fri Apr 20 11:13:16 2007 +0200
17686
17687 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
17688
17689 G2 core reference manual says decrementer and time base
17690 are decreasing/increasing once every 4 bus clock cycles.
17691 Lets fix it, so time in Linux won't run twice as fast
17692
17693 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
17694 Acked-by: Grant Likely <grant.likely@secretlab.ca>
17695
17696commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
17697Author: Gerald Van Baren <vanbaren@cideas.com>
17698Date: Thu Apr 19 23:14:39 2007 -0400
17699
17700 Fix serious pointer bug with bootm and reserve map.
17701
17702 What was suppose to be a stack variable was declared as a pointer,
17703 overwriting random memory.
17704 Also moved the libfdt.a requirement into the main Makefile. That is
17705 The U-Boot Way.
17706
Wolfgang Denk2f152782007-05-05 18:23:11 +020017707commit d21686263574e95cb3e9e9b0496f968b1b897fdb
17708Author: Stefan Roese <sr@denx.de>
17709Date: Thu Apr 19 09:53:52 2007 +0200
17710
17711 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
17712
17713 Previous versions used full wait states for the chip select #1 which
17714 is connected to the Xilinix SystemACE controller on the AMCC Katmai
17715 evaluation board. This leads to really slow access and therefore low
17716 performance. This patch now sets up the chip select a lot faster
17717 resulting in much better read/write performance of the Linux driver.
17718
17719 Signed-off-by: Stefan Roese <sr@denx.de>
17720
Wolfgang Denk14da5f72007-04-20 17:43:28 +020017721commit 37837828d89084879bee2f2b8c7c68d4695940df
17722Author: Wolfgang Denk <wd@denx.de>
17723Date: Wed Apr 18 17:49:29 2007 +0200
17724
17725 Clenaup, update CHANGELOG
17726
17727 Signed-off-by: Wolfgang Denk <wd@denx.de>
17728
Wolfgang Denk37837822007-04-18 17:49:29 +020017729commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
17730Author: Wolfgang Denk <wd@denx.de>
17731Date: Wed Apr 18 17:20:58 2007 +0200
17732
17733 Update CHANGELOG
17734
17735 Signed-off-by: Wolfgang Denk <wd@denx.de>
17736
Wolfgang Denkfd094c62007-04-18 17:20:58 +020017737commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
17738Author: Wolfgang Denk <wd@denx.de>
17739Date: Wed Apr 18 17:07:26 2007 +0200
17740
17741 Cleanup, update CHANGELOG
17742
17743 Sigend-off-by: Wolfgang Denk <wd@denx.de>
17744
Wolfgang Denkb99c1e62007-04-18 16:53:52 +020017745commit 5f6c732affea9647762d27a4617a2ae64c52dceb
17746Author: Wolfgang Denk <wd@denx.de>
17747Date: Wed Apr 18 16:17:46 2007 +0200
17748
17749 Update CHANGELOG
17750
Wolfgang Denk5f6c7322007-04-18 16:17:46 +020017751commit ad4eb555671d97f96dc56eab55103b1f86874b01
17752Author: Wolfgang Denk <wd@denx.de>
17753Date: Wed Apr 18 14:30:39 2007 +0200
17754
17755 MCC200 board: remove warning which is obsolete after PSoC firmware changes
17756
17757 Signed-off-by: Wolfgang Denk <wd@denx.de>
17758
17759commit 3747a3f010b2b1442dec3e871c69788b6017aaae
17760Author: Domen Puncer <domen.puncer@telargo.com>
17761Date: Wed Apr 18 12:11:05 2007 +0200
17762
17763 [PATCH] icecube/lite5200b: document wakeup from low-power support
17764
17765 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
17766
17767commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
17768Author: Stefan Roese <sr@denx.de>
17769Date: Wed Apr 18 12:07:47 2007 +0200
17770
17771 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
17772
17773 Signed-off-by: Stefan Roese <sr@denx.de>
17774
17775commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
17776Author: Stefan Roese <sr@denx.de>
17777Date: Wed Apr 18 12:05:59 2007 +0200
17778
17779 ppc4xx: Add output for bootrom location to 405EZ ports
17780
17781 Now 405EZ ports also show upon bootup from which boot device
17782 they are configured to boot:
17783
17784 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
17785
17786 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
17787 Bootstrap Option E - Boot ROM Location EBC (32 bits)
17788 16 kB I-Cache 16 kB D-Cache
17789 Board: Acadia - AMCC PPC405EZ Evaluation Board
17790
17791 Signed-off-by: Stefan Roese <sr@denx.de>
17792
Wolfgang Denk14da5f72007-04-20 17:43:28 +020017793commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
17794Author: Peter Pearse <peter.pearse@arm.com>
17795Date: Tue Apr 17 13:30:33 2007 +0100
17796
17797 Move ppearse to ARM board list
17798 Add Konstantin Kletschke for scb9328.
17799 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
17800
Wolfgang Denk5f6c7322007-04-18 16:17:46 +020017801commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
17802Author: Domen Puncer <domen.puncer@telargo.com>
17803Date: Mon Apr 16 14:00:13 2007 +0200
17804
17805 [PATCH] icecube/lite5200b: wakeup from low-power support
17806
17807 U-Boot part of Lite5200b low power mode support.
17808 Puts SDRAM out of self-refresh and transfers control to
17809 address saved at physical 0x0.
17810
17811 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
17812 Acked-by: Grant Likely <grant.likely@secretlab.ca>
17813
Wolfgang Denk37837822007-04-18 17:49:29 +020017814commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
17815Author: Gerald Van Baren <vanbaren@cideas.com>
17816Date: Sun Apr 15 13:54:26 2007 -0400
17817
17818 Fix the ft_cpu_setup() property settings.
17819
17820 Use "setter" functions instead of flags, cleaner and more flexible.
17821 It also fixes the problem noted by Timur Tabi that the ethernet MAC
17822 addresses were all being set incorrectly to the same MAC address.
17823
17824commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
17825Author: Gerald Van Baren <vanbaren@cideas.com>
17826Date: Sat Apr 14 22:51:24 2007 -0400
17827
17828 Improve the bootm command for CONFIG_OF_LIBFDT
17829
17830 In bootm, create the "/chosen" node only if it doesn't already exist
17831 (better matches the previous behavior).
17832 Update for proper reserved memory map handling for initrd.
17833
17834commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
17835Author: Gerald Van Baren <vanbaren@cideas.com>
17836Date: Sat Apr 14 22:46:41 2007 -0400
17837
17838 Add some utilities to manipulate the reserved memory map.
17839
Wolfgang Denk5f6c7322007-04-18 16:17:46 +020017840commit 8048cdd56f04a756eeea4951f402bf5cc33785db
17841Author: Wolfgang Denk <wd@denx.de>
17842Date: Sat Apr 14 21:16:54 2007 +0200
17843
17844 Update CHANGELOG
17845
Wolfgang Denk2a26ec42007-04-18 17:07:26 +020017846commit 8e6875183cdca91c134408d119d4abcd48ef6856
17847Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17848Date: Sun Dec 17 18:56:46 2006 +0100
17849
17850 AVR32: Enable MMC support
17851
17852 Set up the portmux for the MMC interface and enable the MMC driver
17853 along with support for DOS partitions, ext2 and FAT filesystems.
17854
17855 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17856
17857commit fc26c97bb6df41b4a95662c34054fe912387bf38
17858Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17859Date: Fri Jan 20 10:03:53 2006 +0100
17860
17861 Atmel MCI driver
17862
17863 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
17864
17865 The AT91 ARM-based CPUs use basically the same hardware, so it should
17866 be possible to share this driver, but no effort has been made so far.
17867
17868 Hardware documentation can be found in the AT32AP7000 data sheet,
17869 which can be downloaded from
17870
17871 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
17872
17873 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17874
17875commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
17876Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17877Date: Sun Dec 17 18:55:37 2006 +0100
17878
17879 AVR32: Add clk and gpio infrastructure for mmci
17880
17881 Implement functions for configuring the mmci pins, as well as
17882 functions for getting the clock rate of the mmci controller.
17883
17884 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17885
17886commit 7fac3f69e9f05c5e5326681976c35d129324c4de
17887Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17888Date: Sun Dec 17 18:53:56 2006 +0100
17889
17890 Enable partition support with MMC
17891
17892 Include implementations of init_part() and get_partition_info() when
17893 CONFIG_MMC is set.
17894
17895 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17896
17897commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
17898Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17899Date: Sun Dec 17 17:14:30 2006 +0100
17900
17901 AVR32: Enable networking
17902
17903 Implement MACB initialization for AVR32 and ATSTK1000, and turn
17904 everything on, including the MACB driver.
17905
17906 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17907
17908commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
17909Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17910Date: Fri Jan 20 10:03:34 2006 +0100
17911
17912 Atmel MACB ethernet driver
17913
17914 Driver for the Atmel MACB on-chip ethernet controller.
17915
17916 This driver has been tested on the ATSTK1000 board with a AT32AP7000
17917 CPU. It should probably work on AT91SAM926x as well with some minor
17918 modifications.
17919
17920 Hardware documentation can be found in the AT32AP7000 data sheet,
17921 which can be downloaded from
17922
17923 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
17924
17925 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17926
17927commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
17928Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17929Date: Sun Dec 17 16:56:14 2006 +0100
17930
17931 AVR32: Add clk and gpio infrastructure for macb0 and macb1
17932
17933 Implement functions for configuring the macb0 and macb1 pins, as
17934 well as functions for getting the clock rate of the various
17935 busses the macb ethernet controllers are connected to.
17936
17937 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17938
17939commit d5acb95b16a0a74c643524342c3437e765426d05
17940Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17941Date: Sun Dec 17 15:39:15 2006 +0100
17942
17943 AVR32: Implement simple DMA memory allocator
17944
17945 Implement dma_alloc_coherent() which returns cache-aligned
17946 uncacheable memory.
17947
17948 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17949
17950commit 91975b0fea773c9e681fea8cf3349669f27685ee
17951Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17952Date: Sun Dec 17 15:46:02 2006 +0100
17953
17954 Import <linux/mii.h> from the Linux kernel
17955
17956 Instead of creating yet another set of MII register definitions
17957 in the macb driver, here's a complete set of definitions for everyone
17958 to use.
17959
17960 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17961
17962commit 1b804b229556a4d862da93c0ec94e79419364b2c
17963Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17964Date: Wed Mar 21 19:47:36 2007 +0100
17965
17966 AVR32: Include more commands for ATSTK1000
17967
17968 Include the imi, imls and jffs commands sets by default on ATSTK1000.
17969 Also define CONFIG_BOOTARGS to something more useful, define
17970 CONFIG_BOOTCOMMAND and enable autoboot by default.
17971
17972 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17973
17974commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
17975Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17976Date: Wed Mar 21 19:44:48 2007 +0100
17977
17978 AVR32: Provide a definition of struct stat
17979
17980 Copy the definition of struct stat from the Linux kernel.
17981
17982 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17983
17984commit 12f099c08167a7a51aeee623bc16dafd0841271c
17985Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17986Date: Sun Dec 17 14:46:06 2006 +0100
17987
17988 AVR32: Use initdram() instead of board_init_memories()
17989
17990 Conform to the "standard" interface and use initdram() instead of
17991 board_init_memories() on AVR32. This enables us to get rid of the
17992 sdram_size member of the global_data struct as well.
17993
17994 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17995
17996commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
17997Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17998Date: Mon Nov 20 15:53:10 2006 +0100
17999
18000 AVR32: Relocate u-boot to SDRAM
18001
18002 Relocate the u-boot image into SDRAM like everyone else does. This
18003 means that we can handle much larger .data and .bss than we used to.
18004
18005 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18006
18007commit df548d3c3e2bbc40258713167859ffc2ce99a900
18008Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18009Date: Sun Nov 19 18:06:53 2006 +0100
18010
18011 AVR32: Resource management rewrite
18012
18013 Rewrite the resource management code (i.e. I/O memory, clock gating,
18014 gpio) so it doesn't depend on any global state. This is necessary
18015 because this code is heavily used before relocation to RAM, so we
18016 can't write to any global variables.
18017
18018 As an added bonus, this makes u-boot's memory footprint a bit smaller,
18019 although some functionality has been left out; all clocks are enabled
18020 all the time, and there's no checking for gpio line conflicts.
18021
18022 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18023
18024commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
18025Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18026Date: Sat Nov 18 18:01:13 2006 +0100
18027
18028 AVR32: Clean up memory-map.h for at32ap7000
18029
18030 Convert spaces to tabs (must have missed this one last time around),
18031 sort the entries by address and group them together by bus
18032 connectivity.
18033
18034 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18035
18036commit 28c699ef69f4b6cdf252e4747b7b590028a88981
18037Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18038Date: Sat Nov 18 17:32:31 2006 +0100
18039
18040 AVR32: Build position-independent u-boot
18041
18042 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
18043 position independent. This will make relocation a lot easier.
18044
18045 -mno-init-got means that gcc shouldn't emit code to load the GOT
18046 address into r6 in every function prologue. We do it once and for
18047 all in the early startup assembly code, so enabling this option
18048 makes u-boot a bit faster and smaller.
18049
18050 The assembly parts have always been position-independent, so no code
18051 changes should be necessary.
18052
18053 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18054
18055commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
18056Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18057Date: Sat Nov 18 17:24:31 2006 +0100
18058
18059 AVR32: Use avr32-linux- cross-compilation prefix by default
18060
18061 It doesn't really matter which toolchain you use to compile u-boot,
18062 but the avr32-linux one is probably what most people have installed.
18063
18064 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18065
18066commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
18067Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18068Date: Sat Nov 18 17:15:30 2006 +0100
18069
18070 AVR32: Split start_u_boot into board_init_f and board_init_r
18071
18072 Split the avr32 initialization code into a function to run before
18073 relocation, board_init_f and a function to run after relocation,
18074 board_init_r. For now, board_init_f simply calls board_init_r
18075 at the end.
18076
18077 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18078
Wolfgang Denk8048cdd2007-04-14 21:16:54 +020018079commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
18080Author: Heiko Schocher <hs@pollux.denx.de>
18081Date: Sat Apr 14 05:26:48 2007 +0200
18082
18083 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
18084 clear the Display after reset.
18085
18086 Signed-off-by: Heiko Schocher <hs@denx.de>
18087
Wolfgang Denk5f6c7322007-04-18 16:17:46 +020018088commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
18089Author: Denis Peter <d.peter@mpl.ch>
18090Date: Fri Apr 13 09:13:33 2007 +0200
18091
18092 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
18093
18094 Fix bug introduced by "Fix get_partition_info() parameter error in all
18095 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
18096 to use diskboot or scsiboot form another device than 0.
18097
18098 Signed-off-by: Denis Peter <d.peter@mpl.ch>
18099
18100commit 0b94504d22e70f537c17a0d38c87edb6e370977d
18101Author: Greg Lopp <lopp@pobox.com>
18102Date: Fri Apr 13 08:02:24 2007 +0200
18103
18104 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
18105
18106 Signed-of-by: Greg Lopp <lopp@pobox.com>
18107 Acked-by: Grant Likely <grant.likely@secretlab.ca>
18108
Wolfgang Denka7676ea2007-05-16 01:16:53 +020018109commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
18110Author: Xie Xiaobo <r63061@freescale.com>
18111Date: Fri Mar 9 19:08:25 2007 +0800
18112
18113 Fix two bugs for MPC83xx DDR2 controller SPD Init
18114
18115 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
18116 the first bug is that the picos_to_clk routine introduces a huge
18117 rounding error in 83xx.
18118 the second bug is that the mode register write recovery field is
18119 tWR-1, not tWR >> 1.
18120
Wolfgang Denk5f6c7322007-04-18 16:17:46 +020018121commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
18122Author: Jeffrey Mann <mannj@embeddedplanet.com>
18123Date: Thu Apr 12 14:15:59 2007 +0200
18124
18125 ppc4xx: Fix i2c divisor calcularion for PPC4xx
18126
18127 This patch fixes changes the i2c_init(...) function to use the function
18128 get_OPB_freq() rather than calculating the OPB speed by
18129 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
18130 specific per processor. The prior method was not and so was calculating
18131 the wrong speed for some PPC4xx processors.
18132
18133 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
18134 Signed-off-by: Stefan Roese <sr@denx.de>
18135
Wolfgang Denk8048cdd2007-04-14 21:16:54 +020018136commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
18137Author: Wolfgang Denk <wd@denx.de>
18138Date: Wed Apr 11 17:25:01 2007 +0200
18139
18140 Update CHANGELOG
18141
18142 Signed-off-by: Wolfgang Denk <wd@denx.de>
18143
Wolfgang Denk6c9ba912007-04-11 17:25:01 +020018144commit 51056dd9863e6a1bc363afbbe1775c58cd967418
18145Author: Wolfgang Denk <wd@denx.de>
18146Date: Wed Apr 11 17:22:55 2007 +0200
18147
18148 Update for SC3 board
18149
18150 * Make IDE timeout configurable through ide_reset_timeout variable.
18151 * Use Newline as "password" string
18152 * Use just a single partition in NAND flash
18153
Wolfgang Denkfd094c62007-04-18 17:20:58 +020018154commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
18155Author: Haiying Wang <haiying.wang@freescale.com>
18156Date: Mon Jan 22 12:37:30 2007 -0600
18157
18158 Add PIXIS FPGA support for MPC8641HPCN board.
18159
18160 Move the 8641HPCN's PIXIS code to the new directory
18161 board/freescale/common/ as it will be shared by
18162 future boards not in the same processor family.
18163
18164 Write a "pixis_reset" command that utilizes the FPGA
18165 reset sequencer to support alternate soft-reset options
18166 such as using the "alternate" flash bank, enabling
18167 the watch dog, or choosing different CPU frequencies.
18168
18169 Add documentation for the pixis_reset to README.mpc8641hpcn.
18170
18171 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
18172 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18173
Wolfgang Denk37837822007-04-18 17:49:29 +020018174commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
18175Author: Gerald Van Baren <vanbaren@cideas.com>
18176Date: Fri Apr 6 14:19:43 2007 -0400
18177
18178 Moved fdt command support code to fdt_support.c
18179
18180 ...in preparation for improving the bootm command's handling of fdt blobs.
18181 Also cleaned up some coding sloppiness.
18182
18183commit 6679f9299534e488a171a9bb8f9bb891de247aab
18184Author: Gerald Van Baren <vanbaren@cideas.com>
18185Date: Fri Apr 6 14:17:14 2007 -0400
18186
18187 libfdt: Make fdt_check_header() public
18188
18189 Changed _fdt_check_header() to fdt_check_header() and made it part of
18190 the interface - it is a useful routine.
18191
18192 Also did some asthetics cleanup to the include files (headers).
18193
Wolfgang Denk5f6c7322007-04-18 16:17:46 +020018194commit c0707ce65677650b5ceab0500ee50ae5168afef2
18195Author: Aubrey Li <aubrey.adi@gmail.com>
18196Date: Thu Apr 5 18:34:06 2007 +0800
18197
18198 [Blackfin][PATCH] Kill off a bunch of common local prototypes
18199
18200commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
18201Author: Aubrey Li <aubrey.adi@gmail.com>
18202Date: Thu Apr 5 18:33:04 2007 +0800
18203
18204 [Blackfin][PATCH] Fix dynamic CPLB generation issue
18205
18206commit 0445e3a264251d75b1be45ef713c70726a2952f0
18207Author: Aubrey Li <aubrey.adi@gmail.com>
18208Date: Thu Apr 5 18:31:47 2007 +0800
18209
18210 [Blackfin][PATCH] minior cleanup
18211
18212commit 155fd766573981090e638b493d5857562151862e
18213Author: Aubrey Li <aubrey.adi@gmail.com>
18214Date: Thu Apr 5 18:31:18 2007 +0800
18215
18216 [Blackfin][PATCH] Fix copyright and update license
18217
18218commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
18219Author: Aubrey Li <aubrey.adi@gmail.com>
18220Date: Thu Apr 5 18:30:25 2007 +0800
18221
18222 [Blackfin][PATCH] Add BF537 EMAC driver initialization
18223
18224commit 889256e8604e0c68db1d866d720894dffede9df6
18225Author: Aubrey Li <aubrey.adi@gmail.com>
18226Date: Thu Apr 5 18:29:55 2007 +0800
18227
18228 [Blackfin][PATCH] call real the system synchronize instruction
18229
18230commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
18231Author: Aubrey Li <aubrey.adi@gmail.com>
18232Date: Thu Apr 5 18:29:17 2007 +0800
18233
18234 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
18235
18236commit dfeeab2cd680df047e68e723b246adf6f33bb556
18237Author: Aubrey Li <aubrey.adi@gmail.com>
18238Date: Thu Apr 5 18:28:34 2007 +0800
18239
18240 [Blackfin][PATCH]: fix flash unaligned copy issue
18241
Wolfgang Denkfd094c62007-04-18 17:20:58 +020018242commit 443feb740584e406efa203af909fe2926608e8d5
18243Author: Igor Marnat <marny@rambler.ru>
18244Date: Wed Mar 21 09:55:01 2007 +0300
18245
18246 Update usage of 'nc' in README.NetConsole
18247
18248 Added information about usage of NetConsole on systems where the -l and -p
18249 switches are mutually exclusive.
18250
18251 Signed-off-by: Igor Marnat <marny@rambler.ru>
18252 Signed-off-by: Ben Warren <bwarren@qstreams.com>
18253
Wolfgang Denk6c9ba912007-04-11 17:25:01 +020018254commit 31c98a88228021b314c89ebb8104fb6473da4471
18255Author: Wolfgang Denk <wd@denx.de>
18256Date: Wed Apr 4 02:09:30 2007 +0200
18257
18258 Minor coding style cleanup.
18259
Wolfgang Denk31c98a82007-04-04 02:09:30 +020018260commit 94abd7c0583ebe01e799b25f451201deeaab550d
18261Author: Wolfgang Denk <wd@denx.de>
18262Date: Wed Apr 4 01:49:15 2007 +0200
18263
18264 Minor cleanup.
18265
Wolfgang Denk9986bc32007-08-12 21:34:50 +020018266commit 822af351ad2babc7d99033361a5fcacd30f6bc78
18267Author: Rodolfo Giometti <giometti@enneenne.com>
18268Date: Tue Apr 3 14:27:18 2007 +0200
18269
18270 Support for the Philips ISP116x HCD (Host Controller Driver)
18271
18272 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
18273
18274commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
18275Author: Markus Klotzbuecher <mk@denx.de>
18276Date: Tue Apr 3 14:27:08 2007 +0200
18277
18278 USB: cleanup monahans usb support. Remove dead code.
18279
18280 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18281
Wolfgang Denk5f6c7322007-04-18 16:17:46 +020018282commit a65c5768e5537530bd1780af3d3fddc3113a163c
18283Author: Stefan Roese <sr@denx.de>
18284Date: Mon Apr 2 10:09:30 2007 +0200
18285
18286 ppc4xx: Change SysACE address on Katmai
18287
18288 With this new base address of the Xilinx SystemACE controller
18289 the Linux driver will be easier to adapt, since it can now be
18290 mapped via the "normal" ioremap() call.
18291
18292 Signed-off-by: Stefan Roese <sr@denx.de>
18293
Wolfgang Denk94abd7c2007-04-04 01:49:15 +020018294commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
18295Author: Gerald Van Baren <vanbaren@cideas.com>
18296Date: Sat Mar 31 14:30:53 2007 -0400
18297
18298 Fix some minor whitespace violations.
18299
18300commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
18301Author: Gerald Van Baren <vanbaren@cideas.com>
18302Date: Sat Mar 31 12:23:51 2007 -0400
18303
18304 Add a flattened device tree (fdt) command (2 of 2)
18305
18306 Modifications to the existing code to support the new fdt command.
18307
18308commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
18309Author: Gerald Van Baren <vanbaren@cideas.com>
18310Date: Sat Mar 31 12:22:10 2007 -0400
18311
18312 Add a flattened device tree (fdt) command (1 of 2)
18313
18314 The fdt command uses David Gibson's libfdt library to manipulate as well
18315 as print the flattened device tree. This patch is the new command,
18316 the second part is the modifications to the existing code.
18317
18318commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
18319Author: Gerald Van Baren <vanbaren@cideas.com>
18320Date: Sat Mar 31 12:13:43 2007 -0400
18321
18322 libfdt: Enhanced and published fdt_next_tag()
18323
18324 Enhanced the formerly private function _fdt_next_tag() to allow stepping
18325 through the tree, used to produce a human-readable dump, and made
18326 it part of the published interface.
18327 Also added some comments.
18328
18329commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
18330Author: Gerald Van Baren <vanbaren@cideas.com>
18331Date: Sat Mar 31 12:05:39 2007 -0400
18332
18333 libfdt: Customizations for use by u-boot.
18334
18335 Changes to David Gibson's original source to fit into u-boot's
18336 environment. No functionality changes.
18337
18338commit 35748177c64a4a83a00057e93bb33e40278a2a96
18339Author: Gerald Van Baren <vanbaren@cideas.com>
18340Date: Sat Mar 31 12:00:56 2007 -0400
18341
18342 libfdt: Import libfdt source (2 of 2)
18343
18344 This adds the applicable libfdt source files (unmodified) and a README
18345 to explain where the source came from.
18346
18347commit 7cd5da0fe877e7171a4cdd44880bce783132871a
18348Author: Gerald Van Baren <vanbaren@cideas.com>
18349Date: Sat Mar 31 11:59:59 2007 -0400
18350
18351 libfdt: Import libfdt source (1 of 2)
18352
18353 This adds the applicable libfdt source files (unmodified) and a README
18354 to explain where the source came from.
18355
Wolfgang Denk6c9ba912007-04-11 17:25:01 +020018356commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
18357Author: Stefan Roese <sr@denx.de>
18358Date: Sat Mar 31 13:16:23 2007 +0200
18359
18360 ppc4xx: Update Katmai bootstrap command
18361
18362 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
18363 is selected.
18364
18365 Signed-off-by: Stefan Roese <sr@denx.de>
18366
18367commit cabee756a6532986729477c3cc1ea16ef8517ad2
18368Author: Stefan Roese <sr@denx.de>
18369Date: Sat Mar 31 13:15:06 2007 +0200
18370
18371 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
18372
18373 Additional RAM information is now printed upon powerup, like
18374 DDR2 frequency and CAS latency.
18375
18376 Signed-off-by: Stefan Roese <sr@denx.de>
18377
18378commit 60723803431ac75cad085690789e433d5ab9174e
18379Author: Stefan Roese <sr@denx.de>
18380Date: Sat Mar 31 08:48:36 2007 +0200
18381
18382 ppc4xx: Change Yucca config file to support ECC
18383
18384 With the updated 44x DDR2 driver the Yucca board now supports
18385 ECC generation and checking.
18386
18387 Signed-off-by: Stefan Roese <sr@denx.de>
18388
18389commit 490e5730c674b20d708b783a2c5ffd7208f83873
18390Author: Stefan Roese <sr@denx.de>
18391Date: Sat Mar 31 08:47:34 2007 +0200
18392
18393 ppc4xx: Fix "bootstrap" command for Katmai board
18394
18395 The board specific "bootstrap" command is now fixed and can
18396 be used for the AMCC Katmai board to configure different
18397 CPU/PLB/OPB frequencies.
18398
18399 Signed-off-by: Stefan Roese <sr@denx.de>
18400
18401commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
18402Author: Stefan Roese <sr@denx.de>
18403Date: Sat Mar 31 08:46:08 2007 +0200
18404
18405 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
18406
18407 Fix a bug in the auto calibration routine. This driver now runs
18408 more reliable with the tested modules. It's also tested with
18409 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
18410
18411 Signed-off-by: Stefan Roese <sr@denx.de>
18412
Wolfgang Denk31c98a82007-04-04 02:09:30 +020018413commit 342cd097be1e7affe82f42ab3da220959a699e64
18414Author: Michal Simek <monstr@monstr.eu>
18415Date: Fri Mar 30 22:52:09 2007 +0200
18416
18417 [PATCH] Clean include dependence
18418
18419commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
18420Author: Michal Simek <monstr@monstr.eu>
18421Date: Fri Mar 30 22:42:45 2007 +0200
18422
18423 [CLEAN] Remove inefficient Suzaku code
18424
Wolfgang Denk6c9ba912007-04-11 17:25:01 +020018425commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
18426Author: Stefan Roese <sr@denx.de>
18427Date: Wed Mar 28 15:03:16 2007 +0200
18428
18429 Merge some AMCC make targets to keep the top-level Makefile smaller
18430
18431 Signed-off-by: Stefan Roese <sr@denx.de>
18432
18433commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
18434Author: Stefan Roese <sr@denx.de>
18435Date: Wed Mar 28 14:52:12 2007 +0200
18436
18437 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
18438
18439 The "old" i2c commands (iprobe, imd...) are now compiled in again,
18440 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
18441 config option.
18442
18443 Signed-off-by: Stefan Roese <sr@denx.de>
18444
Wolfgang Denk31c98a82007-04-04 02:09:30 +020018445commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
18446Author: Michal Simek <monstr@monstr.eu>
18447Date: Tue Mar 27 00:32:16 2007 +0200
18448
18449 PATCH: Resolve GPL license problem
18450
Wolfgang Denk9986bc32007-08-12 21:34:50 +020018451commit ae00bb4b2944dc64a485ed72a19754b11af7c223
18452Author: Rodolfo Giometti <giometti@enneenne.com>
18453Date: Mon Mar 26 12:03:36 2007 +0200
18454
18455 PXA: pxa27x USB OHCI support
18456
18457 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
18458
18459commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
18460Author: Markus Klotzbuecher <mk@denx.de>
18461Date: Mon Mar 26 11:21:05 2007 +0200
18462
18463 USB: remove the S3C24X0_merge #define, which was introduced while
18464 merging OHCI drivers.
18465
18466 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18467
Wolfgang Denk31c98a82007-04-04 02:09:30 +020018468commit 1798049522f594013aea29457d46794298c6ae15
18469Author: Michal Simek <root@monstr.eu>
18470Date: Mon Mar 26 01:39:07 2007 +0200
18471
18472 Support for XUPV2P board
18473 Reset support
18474 BSP autoconfig support
18475
Wolfgang Denk6c9ba912007-04-11 17:25:01 +020018476commit 0d974d5297349504a2ddfa09314be573b5df320a
18477Author: Stefan Roese <sr@denx.de>
18478Date: Sat Mar 24 15:57:09 2007 +0100
18479
18480 [PATCH] Add 4xx GPIO functions
18481
18482 This patch adds some 4xx GPIO functions. It also moves some of the
18483 common code and defines into a common 4xx GPIO header file.
18484
18485 Signed-off-by: Stefan Roese <sr@denx.de>
18486
18487commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
18488Author: Stefan Roese <sr@denx.de>
18489Date: Sat Mar 24 15:55:58 2007 +0100
18490
18491 [PATCH] Small Sequoia cleanup
18492
18493 Signed-off-by: Stefan Roese <sr@denx.de>
18494
18495commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
18496Author: Stefan Roese <sr@denx.de>
18497Date: Sat Mar 24 15:45:34 2007 +0100
18498
18499 [PATCH] Clean up 40EZ/Acadia support
18500
18501 This patch cleans up all the open issue of the preliminary
18502 Acadia support.
18503
18504 Signed-off-by: Stefan Roese <sr@denx.de>
18505
Wolfgang Denk94abd7c2007-04-04 01:49:15 +020018506commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
18507Author: Jon Loeliger <jdl@freescale.com>
18508Date: Tue Dec 12 11:02:20 2006 -0600
18509
18510 Fix 8641HPCN problem with ld version 2.16
18511
18512 (Dot outside sections problem).
18513
18514 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
18515
18516 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18517
18518commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
18519Author: Haiying Wang <haiying.wang@freescale.com>
18520Date: Thu Dec 7 10:35:55 2006 -0600
18521
18522 Set Rev 2.x 86xx PIC in mixed mode.
18523
18524 Prevent false interrupt from hanging Linux as MSR[EE] is set
18525 to enable interrupts by changing the PIC out of the default
18526 pass through mode into mixed mode.
18527
18528 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
18529 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18530
18531commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
18532Author: Jason Jin <jason.jin@freescale.com>
18533Date: Thu Dec 7 10:32:35 2006 -0600
18534
18535 Add flash cmd function to 8641HPCN ramboot
18536
18537 Also fixes some commmand for 8641 HPCN ramboot case.
18538
18539 Signed-off-by: Jason Jin <jason.jin@freescale.com>
18540 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18541
18542commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
18543Author: Ed Swarthout <ed.swarthout@freescale.com>
18544Date: Thu Dec 7 10:34:14 2006 -0600
18545
18546 Add support for 8641 Rev 2 silicon.
18547
18548 Without this patch, I am unable to get to the prompt on rev 2 silicon.
18549 Only set ddrioovcr for rev1.
18550
18551 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
18552 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18553
18554commit 44ba464b99001f8bd1c456a1e9d59726252f707a
18555Author: Wolfgang Denk <wd@denx.de>
18556Date: Thu Mar 22 00:13:12 2007 +0100
18557
18558 Code cleanup / re-insert previous Copyright entries.
18559
18560 Signed-off-by: Wolfgang Denk <wd@denx.de>
18561
Wolfgang Denk44ba4642007-03-22 00:13:12 +010018562commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
18563Author: Wolfgang Denk <wd@denx.de>
18564Date: Wed Mar 21 23:26:15 2007 +0100
18565
18566 Code cleanup. Update CHANGELOG
18567
Wolfgang Denk2a8dfe02007-03-21 23:26:15 +010018568commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
18569Author: Stefan Roese <sr@denx.de>
18570Date: Wed Mar 21 14:54:29 2007 +0100
18571
18572 ppc4xx: Fix file mode of include/configs/acadia.h
18573
18574 Signed-off-by: Stefan Roese <sr@denx.de>
18575
18576commit d5f4614c9350d9333e575100fb250aab774d0258
18577Author: Markus Klotzbuecher <mk@denx.de>
18578Date: Wed Mar 21 14:41:46 2007 +0100
18579
18580 SPC1920: fix small clock routing bug
18581
18582 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18583
18584commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
18585Author: Stefan Roese <sr@denx.de>
18586Date: Wed Mar 21 13:39:57 2007 +0100
18587
18588 [PATCH] Add AMCC Acadia (405EZ) eval board support
18589
18590 This patch adds support for the new AMCC Acadia eval board.
18591
18592 Please note that this Acadia/405EZ support is still in a beta stage.
18593 Still lot's of cleanup needed but we need a preliminary release now.
18594
18595 Signed-off-by: Stefan Roese <sr@denx.de>
18596
18597commit e01bd218b00af73499331a1a701625a852cd286f
18598Author: Stefan Roese <sr@denx.de>
18599Date: Wed Mar 21 13:38:59 2007 +0100
18600
18601 [PATCH] Add AMCC PPC405EZ support
18602
18603 This patch adds support for the new AMCC 405EZ PPC. It is in
18604 preparation for the AMCC Acadia board support.
18605
18606 Please note that this Acadia/405EZ support is still in a beta stage.
18607 Still lot's of cleanup needed but we need a preliminary release now.
18608
18609 Signed-off-by: Stefan Roese <sr@denx.de>
18610
18611commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
18612Author: Heiko Schocher <hs@pollux.denx.de>
18613Date: Wed Mar 21 08:45:17 2007 +0100
18614
18615 [PATCH] TQM8272: dont change the bits given from the HRCW
18616 for the SIUMCR and BCR Register.
18617 Fix the calculation for the EEprom Size
18618
18619 Signed-off-by: Heiko Schocher <hs@denx.de>
18620
Wolfgang Denk44ba4642007-03-22 00:13:12 +010018621commit 654589873dbafcf104dff133ce0d03a4506e9cc3
18622Author: Aubrey Li <aubrey.adi@gmail.com>
18623Date: Tue Mar 20 18:16:24 2007 +0800
18624
18625 [Blackfin][PATCH] Add BF561 EZKIT board support
18626
18627commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
18628Author: Aubrey Li <aubrey.adi@gmail.com>
18629Date: Mon Mar 19 22:55:58 2007 +0800
18630
18631 [Blackfin][PATCH] minor cleanup
18632
Wolfgang Denk2a8dfe02007-03-21 23:26:15 +010018633commit 389b6bb50f745bf5038ce030300d8a8512e96f79
18634Author: Wolfgang Denk <wd@denx.de>
18635Date: Mon Mar 19 13:10:08 2007 +0100
18636
18637 Remove obsoleted POST files.
18638
18639 Signed-off-by: Wolfgang Denk <wd@denx.de>
18640
Wolfgang Denk44ba4642007-03-22 00:13:12 +010018641commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
18642Author: Aubrey Li <aubrey.adi@gmail.com>
18643Date: Mon Mar 19 01:26:11 2007 +0800
18644
18645 [PATCH] Add flash chip M29W320ET/B support
18646
18647commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
18648Author: Aubrey Li <aubrey.adi@gmail.com>
18649Date: Mon Mar 19 01:24:52 2007 +0800
18650
18651 [Blackfin][PATCH] Add BF537 stamp board support
18652
Wolfgang Denk2a8dfe02007-03-21 23:26:15 +010018653commit 8423e5e31a7235d05a482627315fb11d49c17bd7
18654Author: Stefan Roese <sr@denx.de>
18655Date: Fri Mar 16 21:11:42 2007 +0100
18656
18657 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
18658
18659 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
18660 DDR memory are dynamically programmed matching the total size
18661 of the equipped memory (DIMM modules).
18662
18663 Signed-off-by: Stefan Roese <sr@denx.de>
18664
18665commit 76d1466f918b881cda2d259254761e73885093c2
18666Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18667Date: Tue Mar 13 13:38:05 2007 +0100
18668
18669 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
18670 boards in terms of unification.
18671
18672 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18673
18674commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
18675Author: Wolfgang Denk <wd@denx.de>
18676Date: Tue Mar 13 16:05:55 2007 +0100
18677
18678 Make SC3 board build with 'make O='; use 'addcons' consistently
18679 (SC3 and Jupiter used to use 'addcon' instead).
18680
18681 Signed-off-by: Wolfgang Denk wd@denx.de
18682
18683commit 8502e30a28e492c756ea2d7df0ace026388fce4b
18684Author: Heiko Schocher <hs@pollux.denx.de>
18685Date: Tue Mar 13 09:40:59 2007 +0100
18686
18687 [PATCH] update board config for jupiter Board:
18688 added Hush Shell,
18689 CONFIG_CMDLINE_EDITING,
18690 CFG_ENV_ADDR_REDUND activated
18691
18692 Signed-off-by: Heiko Schocher <hs@denx.de>
18693
Wolfgang Denk44ba4642007-03-22 00:13:12 +010018694commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
18695Author: Aubrey Li <aubrey.adi@gmail.com>
18696Date: Mon Mar 12 12:11:55 2007 +0800
18697
18698 [Blackfin][PATCH] minor cleanup
18699
18700commit bfa5754a58477ac917d21527cd0f079d87cf188e
18701Author: Aubrey Li <aubrey.adi@gmail.com>
18702Date: Mon Mar 12 01:42:06 2007 +0800
18703
18704 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
18705
18706commit 8440bb14581a294375c34b91b42512f9753d1130
18707Author: Aubrey Li <aubrey.adi@gmail.com>
18708Date: Mon Mar 12 00:25:14 2007 +0800
18709
18710 [Blackfin][PATCH] code cleanup
18711
Wolfgang Denk31c98a82007-04-04 02:09:30 +020018712commit cfc67116a706fd18b8f6a9c11a16753c5626d689
18713Author: Michal Simek <monstr@monstr.eu>
18714Date: Sun Mar 11 13:48:24 2007 +0100
18715
18716 [Microblaze][PATCH] part 2
18717 timer support
18718 interrupt controller support
18719 flash support
18720 ethernet support
18721 cache support
18722 board information support
18723 env support
18724 booting image support
18725
18726 adding support for Xilinx ML401
18727
18728commit 76316a318de91f6184e7c22a10e02d275ade2441
18729Author: Michal Simek <monstr@monstr.eu>
18730Date: Sun Mar 11 13:42:58 2007 +0100
18731
18732 [Microblaze][PATCH]
18733 timer support
18734 interrupt controller support
18735 flash support
18736 ethernet support
18737 cache support
18738 board information support
18739 env support
18740 booting image support
18741
18742 adding support for Xilinx ML401
18743
Wolfgang Denk44ba4642007-03-22 00:13:12 +010018744commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
18745Author: Aubrey Li <aubrey.adi@gmail.com>
18746Date: Sat Mar 10 23:49:29 2007 +0800
18747
18748 [Blackfin][PATCH] code cleanup
18749
18750commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
18751Author: Aubrey.Li <aubrey.adi@gmail.com>
18752Date: Fri Mar 9 13:40:56 2007 +0800
18753
18754 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
18755
18756commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
18757Author: Aubrey.Li <aubrey.adi@gmail.com>
18758Date: Fri Mar 9 13:38:44 2007 +0800
18759
18760 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
18761
Wolfgang Denk2a8dfe02007-03-21 23:26:15 +010018762commit 992423ab43c2bcf6b704853bd00af77450915e20
18763Author: Stefan Roese <sr@denx.de>
18764Date: Thu Mar 8 23:00:08 2007 +0100
18765
18766 ppc4xx: Fix file mode of sequoia.c
18767
18768 Signed-off-by: Stefan Roese <sr@denx.de>
18769
18770commit eb92f613556800f7483666db09d9a237ad911d4a
18771Author: Wolfgang Denk <wd@pollux.denx.de>
18772Date: Thu Mar 8 22:52:51 2007 +0100
18773
18774 Minor cleanup.
18775
18776commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
18777Author: John Otken john@softadvances.com <john@softadvances.com>
18778Date: Thu Mar 8 09:39:48 2007 -0600
18779
18780 ppc4xx: Clear Sequoia/Rainier security engine reset bits
18781
18782 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
18783
18784commit 650a330dd2539130c8c324791e2f9f75aed79d4e
18785Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18786Date: Thu Mar 8 16:26:52 2007 +0100
18787
18788 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
18789
18790 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18791
18792commit d9fc703246840c4b268debf48c334ba55c597dc0
18793Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18794Date: Thu Mar 8 16:25:47 2007 +0100
18795
18796 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
18797
18798 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18799
18800commit ced5b9029043397348cdc88e0cfcd6b1f629250b
18801Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18802Date: Thu Mar 8 16:23:11 2007 +0100
18803
18804 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
18805
18806 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18807
18808commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
18809Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18810Date: Thu Mar 8 16:20:32 2007 +0100
18811
18812 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
18813
18814 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18815
18816commit f9fc6a5852a6335840882fa2111925010eea1abe
18817Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18818Date: Wed Mar 7 15:32:01 2007 +0100
18819
18820 fixed ethernet phy configuration for plu405 board
18821
18822 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18823
18824commit 769104c9356594deb2092e204a39c05b33202d6c
18825Author: Wolfgang Denk <wd@pollux.denx.de>
18826Date: Thu Mar 8 21:49:27 2007 +0100
18827
18828 Minor cleanup
18829
Wolfgang Denk769104c2007-03-08 21:49:27 +010018830commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
18831Author: Stefan Roese <sr@denx.de>
18832Date: Thu Mar 8 10:13:16 2007 +0100
18833
18834 [PATCH] Update AMCC Luan 440SP eval board support
18835
18836 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
18837 inititializition. This includes DDR auto calibration and support
18838 for different DIMM modules, instead of the fixed setup used in
18839 the earlier version.
18840
18841 This patch also enables the cache in FLASH for the startup
18842 phase of U-Boot (while running from FLASH). After relocating to
18843 SDRAM the cache is disabled again. This will speed up the boot
18844 process, especially the SDRAM setup, since there are some loops
18845 for memory testing (auto calibration).
18846
18847 Signed-off-by: Stefan Roese <sr@denx.de>
18848
18849commit 2f5df47351910a2936c7741cf111855829200943
18850Author: Stefan Roese <sr@denx.de>
18851Date: Thu Mar 8 10:10:18 2007 +0100
18852
18853 [PATCH] Update AMCC Yucca 440SPe eval board support
18854
18855 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
18856 inititializition. This includes DDR auto calibration and support
18857 for different DIMM modules, instead of the fixed setup used in
18858 the earlier version.
18859
18860 Signed-off-by: Stefan Roese <sr@denx.de>
18861
18862commit 2721a68a9ea91f1e494649ce68b2577261f578e2
18863Author: Stefan Roese <sr@denx.de>
18864Date: Thu Mar 8 10:07:18 2007 +0100
18865
18866 ppc4xx: Small AMCC Katmai 440SPe update
18867
18868 Signed-off-by: Stefan Roese <sr@denx.de>
18869
18870commit df294497479b1dca6dd86318b2a912f72fede0df
18871Author: Stefan Roese <sr@denx.de>
18872Date: Thu Mar 8 10:06:09 2007 +0100
18873
18874 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
18875
18876 Signed-off-by: Stefan Roese <sr@denx.de>
18877
Wolfgang Denkfd094c62007-04-18 17:20:58 +020018878commit 83853178bd36bca6f0f8f1331476620c84a587fc
18879Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18880Date: Wed Mar 7 12:14:50 2007 -0600
18881
18882 net - Support ping reply when processing net-loop
18883
18884 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
18885
18886 This permits the ping command to test the phy interface when the phy
18887 is put in loopback mode (typically by setting register 0 bit 14).
18888
18889 It also allows the port to respond to an external ping when u-boot is
18890 processing some other net command (such as tftp). This is useful when
18891 tftp appears to hang.
18892
18893 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18894 Signed-off-by: Ben Warren <bwarren@qstreams.com>
18895
Wolfgang Denk769104c2007-03-08 21:49:27 +010018896commit fa1aef15bcd47736687be1af544506e90fba545d
18897Author: Stefan Roese <sr@denx.de>
18898Date: Wed Mar 7 16:43:00 2007 +0100
18899
18900 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
18901
18902 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
18903 DDR memory are dynamically programmed matching the total size
18904 of the equipped memory (DIMM modules).
18905
18906 Signed-off-by: Stefan Roese <sr@denx.de>
18907
18908commit e2ebe696818939e2b974628be9c921ea3fe9de13
18909Author: Stefan Roese <sr@denx.de>
18910Date: Wed Mar 7 16:39:36 2007 +0100
18911
18912 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
18913
18914 This patch fixes a problem that occurs when 2 DIMM's are
18915 used. This problem was first spotted and fixed by Gerald Jackson
18916 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
18917 problem in a little more clever way.
18918
18919 This patch also adds the nice functionality to dynamically
18920 create the TLB entries for the SDRAM (tlb.c). So we should
18921 never run into such problems with wrong (too short) TLB
18922 initialization again on these platforms.
18923
18924 As this feature is new to the "old" 44x SPD DDR driver, it
18925 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
18926
18927 Signed-off-by: Stefan Roese <sr@denx.de>
18928
18929commit 39218433983417b9df087976a79e3f80dd5e83d6
18930Author: Wolfgang Denk <wd@denx.de>
18931Date: Wed Mar 7 16:33:44 2007 +0100
18932
18933 UC101: fix compiler warnings
18934
18935commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
18936Author: Wolfgang Denk <wd@pollux.denx.de>
18937Date: Wed Mar 7 16:19:46 2007 +0100
18938
18939 HMI1001: fix build error, cleanup compiler warnings.
18940
18941commit ad5bb451ade552c44bef9119d907929ebc2c126f
18942Author: Wolfgang Denk <wd@pollux.denx.de>
18943Date: Tue Mar 6 18:08:43 2007 +0100
18944
18945 Restructure POST directory to support of other CPUs, boards, etc.
18946
18947commit a5284efd125967675b2e9c6ef7b95832268ad360
18948Author: Wolfgang Denk <wd@pollux.denx.de>
18949Date: Tue Mar 6 18:01:47 2007 +0100
18950
18951 Fix HOSTARCH handling.
18952 Patch by Mike Frysinger, Mar 05 2007
18953
18954commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
18955Author: Stefan Roese <sr@denx.de>
18956Date: Tue Mar 6 07:47:04 2007 +0100
18957
18958 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
18959
18960 As provided by the AMCC applications team, this patch optimizes the
18961 DDR2 setup for 166MHz bus speed. The values provided are also save
18962 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
18963 setup has to be adjusted as done in this patch.
18964
18965 For this the NAND booting version had to include the "speed.c" file
18966 from the cpu/ppc4xx directory. With this addition the NAND SPL image
18967 will just fit into the 4kbytes of program space. gcc version 4.x as
18968 provided with ELDK 4.x is needed to generate this optimized code.
18969
18970 Signed-off-by: Stefan Roese <sr@denx.de>
18971
Wolfgang Denk2a26ec42007-04-18 17:07:26 +020018972commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
18973Author: Wolfgang Denk <wd@pollux.denx.de>
18974Date: Sun Mar 4 01:36:05 2007 +0100
18975
18976 Some code cleanup.
18977
Wolfgang Denk2a8dfe02007-03-21 23:26:15 +010018978commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
18979Author: Kim Phillips <kim.phillips@freescale.com>
18980Date: Wed Feb 28 00:02:04 2007 -0600
18981
18982 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
18983
18984 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
18985
18986commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
18987Author: Kumar Gala <galak@kernel.crashing.org>
18988Date: Tue Feb 27 23:51:42 2007 -0600
18989
18990 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
18991
18992 The config value for:
18993 * CFG_ACR_PIPE_DEP
18994 * CFG_ACR_RPTCNT
18995 * CFG_SPCR_TSEC1EP
18996 * CFG_SPCR_TSEC2EP
18997 * CFG_SCCR_TSEC1CM
18998 * CFG_SCCR_TSEC2CM
18999
19000 Were not being used when setting the appropriate register
19001
19002 Added:
19003 * CFG_SCCR_USBMPHCM
19004 * CFG_SCCR_USBDRCM
19005 * CFG_SCCR_PCICM
19006 * CFG_SCCR_ENCCM
19007
19008 To allow full config of the SCCR.
19009
19010 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
19011 that were just bogus.
19012
19013 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19014
19015commit d51b3cf371cd441030460ef19d36b2924c361b1a
19016Author: Kim Phillips <kim.phillips@freescale.com>
19017Date: Thu Feb 22 20:06:57 2007 -0600
19018
19019 mpc83xx: update [local-]mac-address properties on UEC based devices
19020
19021 8360 and 832x weren't updating their [local-]mac-address
19022 properties. This patch fixes that.
19023
19024 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19025
19026commit 61f4f912acbe60776c5e00df1ec94094ce672957
19027Author: Timur Tabi <timur@freescale.com>
19028Date: Tue Feb 13 10:41:42 2007 -0600
19029
19030 mpc83xx: write MAC address to mac-address and local-mac-address
19031
19032 Some device trees have a mac-address property, some have local-mac-address,
19033 and some have both. To support all of these device trees, this patch
19034 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
19035 This function already updates local-mac-address.
19036
19037 Signed-off-by: Timur Tabi <timur@freescale.com>
19038
19039commit 22d71a71f57fd5d38b27ac3848e50d790360a598
19040Author: Kim Phillips <kim.phillips@freescale.com>
19041Date: Tue Feb 27 18:41:08 2007 -0600
19042
19043 mpc83xx: add command line editing by default
19044
19045commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
19046Author: Kim Phillips <kim.phillips@freescale.com>
19047Date: Wed Feb 14 19:50:53 2007 -0600
19048
19049 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
19050
19051 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
19052 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
19053
19054 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
19055
19056 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19057 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
19058
19059commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
19060Author: Xie Xiaobo <r63061@freescale.com>
19061Date: Wed Feb 14 18:27:17 2007 +0800
19062
19063 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
19064
19065 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
19066 it pass DDR/DDR2 compliance tests.
19067
19068 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
19069
19070commit b110f40bd180c6b560276589beedf753e97c46ce
19071Author: Xie Xiaobo <r63061@freescale.com>
19072Date: Wed Feb 14 18:27:06 2007 +0800
19073
19074 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
19075
19076 MPC8360E rev2.0 have new spridr,and PVR value,
19077 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
19078
19079 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
19080
19081commit 8d172c0f0d85998a256a95b7459a5403a30380ed
19082Author: Xie Xiaobo <r63061@freescale.com>
19083Date: Wed Feb 14 18:26:44 2007 +0800
19084
19085 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
19086
19087 MPC8349E rev3.1 have new spridr,and PVR value,
19088 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
19089
19090 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
19091
19092commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
19093Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
19094Date: Wed Jan 31 11:04:19 2007 +0100
19095
19096 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
19097
19098 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
19099 which is used to se if an slave will ACK after receiving its address.
19100
19101 Correct i2c probing to use this method as the old method could upset
19102 a slave as it wrote a data byte to it.
19103
19104 Add a small delay in i2c_init() to let the controller
19105 shutdown any ongoing I2C activity.
19106
19107 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
19108
19109commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
19110Author: Timur Tabi <timur@freescale.com>
19111Date: Wed Jan 31 15:54:29 2007 -0600
19112
19113 mpc83xx: Add support for the MPC8349E-mITX-GP
19114
19115 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
19116 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
19117 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
19118
19119 Signed-off-by: Timur Tabi <timur@freescale.com>
19120
19121commit fab16807adad350f618024350c6950165c247c72
19122Author: Timur Tabi <timur@freescale.com>
19123Date: Wed Jan 31 15:54:20 2007 -0600
19124
19125 mpc83xx: Delete sdram_init() for MPC8349E-mITX
19126
19127 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
19128 never does anything. This patch deletes it.
19129
19130 Signed-off-by: Timur Tabi <timur@freescale.com>
19131
19132commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
19133Author: Dave Liu <daveliu@freescale.com>
19134Date: Fri Jan 19 10:43:26 2007 +0800
19135
19136 mpc83xx: Fix the LAW1/3 bug
19137
19138 The patch solves the alignment problem of the local bus access windows to
19139 render accessible the memory bank and PHY registers of UPC 1 (starting at
19140 0xf801 0000). What we actually did was to adjust the sizes of the bus
19141 access windows so that the base address alignment requirement would be met.
19142
19143 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
19144 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
19145 Signed-off-by: Dave Liu <daveliu@freescale.com>
19146
19147commit 97c4b397dce236a7318b304667bf89e59d08b17c
19148Author: Kim Phillips <kim.phillips@freescale.com>
19149Date: Tue Jan 30 16:15:31 2007 -0600
19150
19151 mpc83xx: don't hang if watchdog configured on 8360, 832x
19152
19153 don't hang if watchdog configured on 8360, 832x
19154
19155 The watchdog programming model is the same across all 83xx devices;
19156 make the code reflect that.
19157
19158commit b70047478570e371ce7223be342ce98afea0f7d6
19159Author: Kim Phillips <kim.phillips@freescale.com>
19160Date: Tue Jan 30 16:15:21 2007 -0600
19161
19162 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
19163
19164 protect memcpy to bad address if a local-mac-address is missing from dt
19165
19166commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
19167Author: Kim Phillips <kim.phillips@freescale.com>
19168Date: Tue Jan 30 16:15:04 2007 -0600
19169
19170 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
19171
19172 make 8360 default environment fdt be 8360 (not 8349)
19173
19174commit a28899c910024a0226331df07207b1038c300c93
19175Author: Emilian Medve <Emilian.Medve@freescale.com>
19176Date: Tue Jan 30 16:14:50 2007 -0600
19177
19178 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
19179
19180 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
19181 be used for busy-waiting since it strips the 'volatile' property from
19182 the bd variable. gcc3 was working by pure luck.
19183
19184 This is a follow on patch to "Fix the UEC driver bug of QE"
19185
19186commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
19187Author: Kumar Gala <galak@kernel.crashing.org>
19188Date: Tue Jan 30 14:08:30 2007 -0600
19189
19190 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
19191
19192 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
19193 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
19194 CONFIG_MPC834X so they are more generic.
19195
19196 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19197
19198commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
19199Author: Kim Phillips <kim.phillips@freescale.com>
19200Date: Thu Jan 25 13:40:55 2007 -0600
19201
19202 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
19203
19204commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
19205Author: Kim Phillips <kim.phillips@freescale.com>
19206Date: Wed Jan 24 17:18:37 2007 -0600
19207
19208 mpc83xx: sort Makefile targets
19209
19210 reordered targets alphabetically
19211
19212commit 91e25769771c1164ed63ffca0add49f934ae3343
19213Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19214Date: Tue Jan 16 11:38:14 2007 -0500
19215
19216 mpc83xx: U-Boot support for Wind River SBC8349
19217
19218 I've redone the SBC8349 support to match git-current, which
19219 incorporates all the MPC834x updates from Freescale since the 1.1.6
19220 release, including the DDR changes.
19221
19222 I've kept all the SBC8349 files as parallel as possible to the
19223 MPC8349EMDS ones for ease of maintenance and to allow for easy
19224 inspection of what was changed to support this board. Hence the SBC8349
19225 U-Boot has FDT support and everything else that the MPC8349EMDS has.
19226
19227 Fortunately the Freescale updates added support for boards using CS0,
19228 but I had to change spd_sdram.c to allow for board specific settings for
19229 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
19230 default if the board doesn't specify a value.)
19231
19232 Hopefully this should be mergeable as-is and require no whitespace
19233 cleanups or similar, but if something doesn't measure up then let me
19234 know and I'll fix it.
19235
19236 Thanks,
19237 Paul.
19238
19239commit 05031db456ab227f3e3752f37b9b812b65bb83ad
19240Author: Sam Song <samsongshu@yahoo.com.cn>
19241Date: Thu Dec 14 19:03:21 2006 +0800
19242
19243 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
19244
19245 A redundant semicolon existed in mpc8349itx.c
19246 should be removed.
19247
19248 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
19249
19250commit f35f358241c549be3f75cfe2eaa642914275b7ba
19251Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
19252Date: Wed Dec 6 21:23:55 2006 -0500
19253
19254 mpc83xx: Put the version (and magic) after the HRCW.
19255
19256 Put the version (and magic) after the HRCW. This puts it in a fixed
19257 location in flash, not at the start of flash but as close as we can get.
19258
19259 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
19260
19261commit 48aecd969171a6e99a55fae04933857787f9a5bd
19262Author: Dave Liu <r63238@freescale.com>
19263Date: Thu Dec 7 21:14:51 2006 +0800
19264
19265 mpc83xx: Add the MPC832XEMDS board readme
19266
19267 Add the MPC832XEMDS board readme
19268
19269 Signed-off-by: Dave Liu <daveliu@freescale.com>
19270
19271commit 24c3aca3f1358b113d3215adb5433b156e99f72b
19272Author: Dave Liu <r63238@freescale.com>
19273Date: Thu Dec 7 21:13:15 2006 +0800
19274
19275 mpc83xx: Add support for the MPC832XEMDS board
19276
19277 This patch supports DUART, ETH3/4 and PCI etc.
19278
19279 Signed-off-by: Dave Liu <daveliu@freescale.com>
19280
19281commit e080313c32322e15ab5a18eb896a252858c57284
19282Author: Dave Liu <r63238@freescale.com>
19283Date: Thu Dec 7 21:11:58 2006 +0800
19284
19285 mpc83xx: streamline the 83xx immr head file
19286
19287 For better format and style, I streamlined the 83xx head files,
19288 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
19289 duplicated macro definition appear in the both files; 2) the structure
19290 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
19291 macro definition put inside the each structure. So, I cleaned up the
19292 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
19293 moved the macro definition to mpc83xx.h, Just like MPC8260.
19294
19295 CHANGELOG
19296
19297 *streamline the 83xx immr head file
19298
19299 Signed-off-by: Dave Liu <daveliu@freescale.com>
19300
19301commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
19302Author: Dave Liu <r63238@freescale.com>
19303Date: Wed Dec 6 11:38:17 2006 +0800
19304
19305 mpc83xx: Fix the UEC driver bug of QE
19306
19307 The patch prevents the GCC tool chain from striping useful code for
19308 optimization. It will make UEC ethernet driver workable, Otherwise the
19309 UEC will fail in tx when you are using gcc4.x. but the driver can work
19310 when using gcc3.4.3.
19311
19312 CHANGELOG
19313
19314 *Prevent the GCC from striping code for optimization, Otherwise the UEC
19315 will tx failed when you are using gcc4.x.
19316
19317 Signed-off-by: Dave Liu <daveliu@freescale.com>
19318
Wolfgang Denk769104c2007-03-08 21:49:27 +010019319commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
19320Author: Stefan Roese <sr@denx.de>
19321Date: Thu Mar 1 21:11:36 2007 +0100
19322
19323 [PATCH] Update AMCC Katmai 440SPe eval board support
19324
19325 This patch updates the recently added Katmai board support. The biggest
19326 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
19327 driver.
19328
19329 Please note, that still some problems are left with some memory
19330 configurations. See the driver for more details.
19331
19332 Signed-off-by: Stefan Roese <sr@denx.de>
19333
19334commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
19335Author: Stefan Roese <sr@denx.de>
19336Date: Thu Mar 1 07:03:25 2007 +0100
19337
19338 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
19339
19340 Signed-off-by: Stefan Roese <sr@denx.de>
19341
19342commit ccbc7036648e465697ca298ba51e0e76dda352a0
19343Author: Wolfgang Denk <wd@pollux.denx.de>
19344Date: Wed Feb 28 01:28:53 2007 +0100
19345
19346 SC3: fix typo in default environment
19347
19348commit e344568b1b46af85ec32d815586f91bc115d6223
19349Author: Sergei Poselenov <sposelenov@emcraft.com>
19350Date: Tue Feb 27 20:15:30 2007 +0300
19351
19352 MCC200: Fixes for update procedure
19353
19354 - fix logic error in image type handling
19355 - make sure file system images (cramfs etc.) get stored in flash
19356 with image header stripped so they can be mounted through MTD
19357
19358commit 743571145b37182757d4e688a77860b36ee77573
19359Author: Wolfgang Denk <wd@pollux.denx.de>
19360Date: Tue Feb 27 14:26:04 2007 +0100
19361
19362 Minor code cleanup.
19363
Wolfgang Denk74357112007-02-27 14:26:04 +010019364commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
19365Author: Sergei Poselenov <sposelenov@emcraft.com>
19366Date: Tue Feb 27 12:40:16 2007 +0300
19367
19368 MCC200 update - add LCD Progress Indicator
19369
19370commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
19371Author: Stefan Roese <sr@denx.de>
19372Date: Thu Feb 22 07:43:34 2007 +0100
19373
19374 [PATCH] get_dev() now unconditionally uses manual relocation
19375
19376 Since the relocation fix is not included yet and we're not sure how
19377 it will be added, this patch removes code that required relocation
19378 to be fixed for now.
19379
19380 Signed-off-by: Stefan Roese <sr@denx.de>
19381
19382commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
19383Author: Stefan Roese <sr@denx.de>
19384Date: Thu Feb 22 07:40:23 2007 +0100
19385
19386 [PATCH] Change systemace driver to select 8 & 16bit mode
19387
19388 As suggested by Grant Likely this patch enables the Xilinx SystemACE
19389 driver to select 8 or 16bit mode upon startup.
19390
19391 Signed-off-by: Stefan Roese <sr@denx.de>
19392
19393commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
19394Author: Haiying Wang <Haiying.Wang@freescale.com>
19395Date: Wed Feb 21 16:52:31 2007 +0100
19396
19397 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
19398
19399 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
19400 is fully finished. The sync() is defined in each CPU's io.h file. For
19401 those CPUs which do not need sync for now, a dummy sync() is defined in
19402 their io.h as well.
19403
19404 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
19405
19406commit da04995c7dc6772013a9a0dc5c767f190c402478
19407Author: Stefan Roese <sr@denx.de>
19408Date: Wed Feb 21 13:44:34 2007 +0100
19409
19410 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
19411
19412 Signed-off-by: Stefan Roese <sr@denx.de>
19413
19414commit 751bb57107d78978ae08e697c3deba816f5be091
19415Author: Stefan Roese <sr@denx.de>
19416Date: Tue Feb 20 13:21:57 2007 +0100
19417
19418 [PATCH] Fix relocation problem with "new" get_dev() function
19419
19420 This patch enables the "new" get_dev() function for block devices
19421 introduced by Grant Likely to be used on systems that still suffer
19422 from the relocation problems (manual relocation neede because of
19423 problems with linker script).
19424
19425 Hopefully we can resolve this relocation issue soon for all platform
19426 so we don't need this additional code anymore.
19427
19428 Signed-off-by: Stefan Roese <sr@denx.de>
19429
19430commit d93e2212f962668b3dce091ff5edc33f2347fe37
19431Author: Stefan Roese <sr@denx.de>
19432Date: Tue Feb 20 13:17:42 2007 +0100
19433
19434 [PATCH] Update SystemACE driver for 16bit access
19435
19436 This patch removes some problems when the Xilinx SystemACE driver
19437 is used with 16bit access on an big endian platform (like the
19438 AMCC Katmai).
19439
19440 Signed-off-by: Stefan Roese <sr@denx.de>
19441
19442commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
19443Author: Stefan Roese <sr@denx.de>
19444Date: Tue Feb 20 13:15:40 2007 +0100
19445
19446 [PATCH] Clean up Katmai (440SPe) linker script
19447
19448 Signed-off-by: Stefan Roese <sr@denx.de>
19449
19450commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
19451Author: Stefan Roese <sr@denx.de>
19452Date: Tue Feb 20 10:57:08 2007 +0100
19453
19454 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
19455
19456 Signed-off-by: Stefan Roese <sr@denx.de>
19457
19458commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
19459Author: Stefan Roese <sr@denx.de>
19460Date: Tue Feb 20 10:51:26 2007 +0100
19461
19462 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
19463
19464 This patch switches to the desired I2C bus when the date/dtt
19465 commands are called. This can be configured using the
19466 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
19467
19468 Signed-off-by: Stefan Roese <sr@denx.de>
19469
19470commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
19471Author: Stefan Roese <sr@denx.de>
19472Date: Tue Feb 20 10:43:34 2007 +0100
19473
19474 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
19475
19476 This patch adds support for the DDR2 controller used on the
19477 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
19478 board and works fine with the following DIMM modules:
19479
19480 - Corsair CM2X512-5400C4 (512MByte per DIMM)
19481 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
19482 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
19483
19484 This patch also adds the nice functionality to dynamically
19485 create the TLB entries for the SDRAM (tlb.c). So we should
19486 never run into such problems with wrong (too short) TLB
19487 initialization again on these platforms.
19488
19489 Signed-off-by: Stefan Roese <sr@denx.de>
19490
19491commit 36d830c9830379045f5daa9f542ac1c990c70068
19492Author: Stefan Roese <sr@denx.de>
19493Date: Tue Feb 20 10:35:42 2007 +0100
19494
19495 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
19496
19497 Since the existing 4xx SPD SDRAM initialization routines for the
19498 405 SDRAM controller and the 440 DDR controller don't have much in
19499 common this patch splits both drivers into different files.
19500
19501 This is in preparation for the 440 DDR2 controller support (440SP/e).
19502
19503 Signed-off-by: Stefan Roese <sr@denx.de>
19504
19505commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
19506Author: Stefan Roese <sr@denx.de>
19507Date: Tue Feb 20 10:27:08 2007 +0100
19508
19509 [PATCH] PPC4xx: Add support for multiple I2C busses
19510
19511 This patch adds support for multiple I2C busses on the PPC4xx
19512 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
19513 to make use of this feature.
19514
19515 It also merges the 405 and 440 i2c header files into one common
19516 file 4xx_i2c.h.
19517
19518 Also the 4xx i2c reset procedure is reworked since I experienced
19519 some problems with the first access on the 440SPe Katmai board.
19520
19521 Signed-off-by: Stefan Roese <sr@denx.de>
19522
19523commit eb867a76238fb38e952c37871b16d0d7fd61c95f
19524Author: Grant Likely <grant.likely@secretlab.ca>
19525Date: Tue Feb 20 09:05:45 2007 +0100
19526
19527 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
19528
19529 Block device read/write is anonymous data; there is no need to use a
19530 typed pointer. void * is fine. Also add a hook for block_read functions
19531
19532 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19533
19534commit 53758fa20e935cc87eeb0519ed365df753a6f289
19535Author: Grant Likely <grant.likely@secretlab.ca>
19536Date: Tue Feb 20 09:05:38 2007 +0100
19537
19538 [PATCH 8_9] Add block_write hook to block_dev_desc_t
19539
19540 Preparation for future patches which support block device writing
19541
19542 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19543
19544commit f4852ebe6ca946a509667eb68be42026f837be76
19545Author: Grant Likely <grant.likely@secretlab.ca>
19546Date: Tue Feb 20 09:05:31 2007 +0100
19547
19548 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
19549
19550 Register read/write does not need to be wrapped in a full function. The
19551 patch replaces them with macros.
19552
19553 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19554
19555commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
19556Author: Grant Likely <grant.likely@secretlab.ca>
19557Date: Tue Feb 20 09:05:23 2007 +0100
19558
19559 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
19560
19561 The code in this file is not a command; it is a device driver. Put it in
19562 the correct place. There are zero functional changes in this patch, it
19563 only moves the file.
19564
19565 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19566
19567commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
19568Author: Grant Likely <grant.likely@secretlab.ca>
19569Date: Tue Feb 20 09:05:16 2007 +0100
19570
19571 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
19572
19573 This patch is in preparation of additional changes to the sysace driver.
19574 May as well take this opportunity to fixup the inconsistent whitespace since
19575 this file is about to undergo major changes anyway.
19576
19577 There are zero functional changes in this patch. It only cleans up the
19578 the whitespace.
19579
19580 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19581
19582commit 80ba981d940471fe7e539e64fa3d2bd80002beda
19583Author: Grant Likely <grant.likely@secretlab.ca>
19584Date: Tue Feb 20 09:05:07 2007 +0100
19585
19586 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
19587
19588 isprint is already defined in ctype.c
19589
19590 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19591
19592commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
19593Author: Grant Likely <grant.likely@secretlab.ca>
19594Date: Tue Feb 20 09:05:00 2007 +0100
19595
19596 [PATCH 3_9] Move buffer print code from md command to common function
19597
19598 Printing a buffer is a darn useful thing. Move the buffer print code
19599 into print_buffer() in lib_generic/
19600
19601 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19602
19603commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
19604Author: Grant Likely <grant.likely@secretlab.ca>
19605Date: Tue Feb 20 09:04:52 2007 +0100
19606
19607 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
19608
19609 Change the xilinx device drivers and board code to include config.h
19610 instead of xparameters.h directly. config.h always includes the
19611 correct xparameters file. This change reduces the posibility of
19612 including the wrong file when adding a new xilinx board port
19613
19614 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19615
19616commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
19617Author: Grant Likely <grant.likely@secretlab.ca>
19618Date: Tue Feb 20 09:04:34 2007 +0100
19619
19620 [PATCH 1_4] Merge common get_dev() routines for block devices
19621
19622 Each of the filesystem drivers duplicate the get_dev routine. This change
19623 merges them into a single function in part.c
19624
19625 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19626
19627commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
19628Author: Wolfgang Denk <wd@pollux.denx.de>
19629Date: Mon Feb 19 23:09:51 2007 +0100
19630
19631 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
19632 as root file system images.
19633
19634commit 489c696ae7211218961d159e43e722d74c36fcbc
19635Author: Sergei Poselenov <sposelenov@emcraft.com>
19636Date: Wed Feb 14 14:30:28 2007 +0300
19637
19638 MCC200: Extensions to Software Update Mechanism
19639
19640 Update / extend Software Update Mechanism for MCC200 board:
19641
19642 - Add support for rootfs image added. The environment variables
19643 "rootfs_st" and "rootfs_nd" can be used to override the default
19644 values of the image start and end.
19645 - Remove excessive key check code.
19646 - Code cleanup.
19647
19648commit 4be23a12f23f1372634edc3215137b09768b7949
19649Author: Stefan Roese <sr@denx.de>
19650Date: Mon Feb 19 08:23:15 2007 +0100
19651
19652 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
19653
19654 As spotted by Matthias Fuchs, the READY input should not be
19655 enabled for the NOR FLASH on the Sequoia board.
19656
19657 Signed-off-by: Stefan Roese <sr@denx.de>
19658
Wolfgang Denk769104c2007-03-08 21:49:27 +010019659commit 2605e90bf676d48123afe5719a846d2b52b24aac
19660Author: Heiko Schocher <hs@pollux.denx.de>
19661Date: Fri Feb 16 07:57:42 2007 +0100
19662
19663 [PATCH] Added support for the jupiter board.
19664
19665 Signed-off-by: Heiko Schocher <hs@denx.de>
19666
Wolfgang Denk74357112007-02-27 14:26:04 +010019667commit 497d012e5be0194e1084073d0081eb1a844796b2
19668Author: Gary Jennejohn <garyj@pollux.denx.de>
19669Date: Mon Feb 12 13:11:50 2007 +0100
19670
19671 LPC2292: patch from Siemens.
19672
19673commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
19674Author: Stefan Roese <sr@denx.de>
19675Date: Sat Feb 10 08:49:31 2007 +0100
19676
19677 [PATCH] Add missing p3mx.h file to repository (ups)
19678
19679 Signed-off-by: Stefan Roese <sr@denx.de>
19680
19681commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
19682Author: Bartlomiej Sieka <tur@semihalf.com>
19683Date: Fri Feb 9 10:45:42 2007 +0100
19684
19685 [Motion-PRO] Preliminary support for the Motion-PRO board.
19686
19687commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
19688Author: Stefan Roese <sr@denx.de>
19689Date: Wed Feb 7 16:51:08 2007 +0100
19690
19691 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
19692
19693 Some boards that can have more than 768MBytes of SDRAM need to
19694 set "initrd_high", so that the initrd can be accessed by the
19695 Linux kernel.
19696
19697 Signed-off-by: Stefan Roese <sr@denx.de>
19698
19699commit 7372ca68227930d03cffa548310524cad5b96733
19700Author: Stefan Roese <sr@denx.de>
19701Date: Fri Feb 2 12:44:22 2007 +0100
19702
19703 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
19704
19705 Previously the strapping DCR/SDR was read to determine if the internal PCI
19706 arbiter is enabled or not. This strapping bit can be overridden, so now
19707 the current status is read from the correct DCR/SDR register.
19708
19709 Signed-off-by: Stefan Roese <sr@denx.de>
19710
19711commit 2aa54f651a42d198673318f07a20c89a43e4d197
19712Author: Stefan Roese <sr@denx.de>
19713Date: Fri Feb 2 12:42:08 2007 +0100
19714
19715 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
19716
19717 Signed-off-by: Stefan Roese <sr@denx.de>
19718
19719commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
19720Author: Stefan Roese <sr@denx.de>
19721Date: Thu Feb 1 13:22:41 2007 +0100
19722
19723 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
19724
19725 When PCI PNP is enabled the pci pnp configuration routine is called
19726 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
19727 problems with some PCI cards. For now disable the PCI PNP configuration.
19728
19729 Signed-off-by: Stefan Roese <sr@denx.de>
19730
19731commit 2902fadade3be7659467e8d074048c6b7068f5c0
19732Author: Stefan Roese <sr@denx.de>
19733Date: Wed Jan 31 16:56:10 2007 +0100
19734
19735 [PATCH] Update 440EPx/440GRx cpu detection
19736
19737 Signed-off-by: Stefan Roese <sr@denx.de>
19738
19739commit d5ea287b02a6945c3977410e364a879dd1a555c8
19740Author: Stefan Roese <sr@denx.de>
19741Date: Wed Jan 31 16:38:04 2007 +0100
19742
19743 [PATCH] Update esd cpci5200 files
19744
19745 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
19746
19747commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
19748Author: Stefan Roese <sr@denx.de>
19749Date: Wed Jan 31 16:37:34 2007 +0100
19750
19751 [PATCH] Add support for esd mecp5200 board
19752
19753 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
19754
19755commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
19756Author: Stefan Roese <sr@denx.de>
19757Date: Wed Jan 31 12:38:50 2007 +0100
19758
19759 [PATCH] Remove unneccessary yellowstone board config file
19760
19761 Signed-off-by: Stefan Roese <sr@denx.de>
19762
19763commit e802594b6fa1b166308820c276b96dc0d7cc731c
19764Author: Stefan Roese <sr@denx.de>
19765Date: Tue Jan 30 17:06:10 2007 +0100
19766
19767 [PATCH] Update Sequoia (440EPx) config file
19768
19769 The config file now handles the 2nd target, the Rainier (440GRx)
19770 evaluation board better. Additionally the PPC input clock was
19771 adjusted to match the correct value of 33.0 MHz.
19772
19773 Signed-off-by: Stefan Roese <sr@denx.de>
19774
19775commit 700200c67e73b83751418abe7815840dca8fd6cb
19776Author: Stefan Roese <sr@denx.de>
19777Date: Tue Jan 30 17:04:19 2007 +0100
19778
19779 [PATCH] Merge Yosemite & Yellowstone board ports
19780
19781 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
19782 share one config file and all board specific files. This way we
19783 don't have to maintain two different sets of files for nearly
19784 identical boards.
19785
19786 Signed-off-by: Stefan Roese <sr@denx.de>
19787
19788commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
19789Author: Stefan Roese <sr@denx.de>
19790Date: Tue Jan 30 15:01:49 2007 +0100
19791
19792 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
19793
19794 SCPU doesn't use redundant environment in flash.
19795
19796 Signed-off-by: Stefan Roese <sr@denx.de>
19797
19798commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
19799Author: Stefan Roese <sr@denx.de>
19800Date: Tue Jan 30 12:51:07 2007 +0100
19801
19802 [PATCH] alpr: Update alpr board config file
19803
19804 Signed-off-by: Stefan Roese <sr@denx.de>
19805
19806commit f8db84f132b1e335f20f96138a1f09ed97b08664
19807Author: Wolfgang Denk <wd@pollux.denx.de>
19808Date: Tue Jan 30 00:50:40 2007 +0100
19809
19810 LPC2292 SODIMM port coding style cleanup.
19811
Wolfgang Denkf8db84f2007-01-30 00:50:40 +010019812commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
19813Author: Gary Jennejohn <garyj@pollux.denx.de>
19814Date: Wed Jan 24 12:16:56 2007 +0100
19815
19816 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
19817
19818commit 2daf046ba627f85f44195815778140039636244e
19819Author: Bartlomiej Sieka <tur@semihalf.com>
19820Date: Tue Jan 23 17:22:06 2007 +0100
19821
19822 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
19823
19824commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
19825Author: Bartlomiej Sieka <tur@semihalf.com>
19826Date: Tue Jan 23 14:21:14 2007 +0100
19827
19828 [iDMR] Flash driver on initialisation write-protects some sectors,
19829 currently sectors 0-3. Sector 3 does not need to be protected, though
19830 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
19831 fixes this, i.e., only sectors 0-2 are protected.
19832
19833commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
19834Author: Bartlomiej Sieka <tur@semihalf.com>
19835Date: Tue Jan 23 14:11:22 2007 +0100
19836
19837 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
19838 "mii device" results in "Unexpected exception"). Fixing this properly
19839 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
19840 this commit disables MII commads for now.
19841
19842commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
19843Author: Bartlomiej Sieka <tur@semihalf.com>
19844Date: Tue Jan 23 13:25:22 2007 +0100
19845
19846 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
19847 Identification Register (CIR).
19848
Wolfgang Denk2a26ec42007-04-18 17:07:26 +020019849commit fdef388758506765d4d6a7155c8f1584c63ff581
19850Author: roy zang <tie-fei.zang@freescale.com>
19851Date: Mon Jan 22 13:19:21 2007 +0800
19852
19853 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
19854 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
19855 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
19856 mpc7448hpc2 board.
19857
Wolfgang Denkf8db84f2007-01-30 00:50:40 +010019858commit a4012396645533aef218354eeba754dff0deace8
19859Author: Wolfgang Denk <wd@pollux.denx.de>
19860Date: Fri Jan 19 23:08:39 2007 +0100
19861
19862 Minor code cleanup.
19863
Wolfgang Denka4012392007-01-19 23:08:39 +010019864commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
19865Author: Heiko Schocher <hs@pollux.denx.de>
19866Date: Fri Jan 19 19:57:10 2007 +0100
19867
19868 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
19869
19870 Signed-off-by: Heiko Schocher <hs@denx.de>
19871
19872commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
19873Author: Heiko Schocher <hs@pollux.denx.de>
19874Date: Fri Jan 19 18:05:26 2007 +0100
19875
19876 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
19877 if you must swap the bytes between reading/writing.
19878 (Needed for the SC3 board)
19879
19880 Signed-off-by: Heiko Schocher <hs@denx.de>
19881
19882commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
19883Author: Stefan Roese <sr@denx.de>
19884Date: Thu Jan 18 16:05:47 2007 +0100
19885
19886 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
19887
19888 Signed-off-by: Stefan Roese <sr@denx.de>
19889
19890commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
19891Author: Stefan Roese <sr@denx.de>
19892Date: Thu Jan 18 11:54:52 2007 +0100
19893
19894 [PATCH] Update Prodrive P3Mx support
19895
19896 Signed-off-by: Stefan Roese <sr@denx.de>
19897
19898commit 34167a36c29ee946b727465db5c014746a08e978
19899Author: Stefan Roese <sr@denx.de>
19900Date: Thu Jan 18 11:48:10 2007 +0100
19901
19902 [PATCH] Add missing Taishan config file
19903
19904 Signed-off-by: Stefan Roese <sr@denx.de>
19905
19906commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
19907Author: Heiko Schocher <hs@pollux.denx.de>
19908Date: Thu Jan 18 11:28:51 2007 +0100
19909
19910 [PATCH] Fix: Compilerwarnings for SC3 board.
19911 The EBC Configuration Register is now by CFG_EBC_CFG definable
19912 Added JFFS2 support for the SC3 board.
19913
19914 Signed-off-by: Heiko Schocher <hs@denx.de>
19915
19916commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
19917Author: Stefan Roese <sr@denx.de>
19918Date: Thu Jan 18 10:25:34 2007 +0100
19919
19920 [PATCH] Add support for AMCC Taishan PPC440GX eval board
19921
19922 Signed-off-by: Stefan Roese <sr@denx.de>
19923
19924commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
19925Author: Wolfgang Denk <wd@pollux.denx.de>
19926Date: Tue Jan 16 18:30:50 2007 +0100
19927
19928 Raname solidcard3 into sc3; add redundant env for sc3
19929
Wolfgang Denk6d3e0102007-01-16 18:30:50 +010019930commit 1bbbbdd20fcec9933697000dcf55ff7972622596
19931Author: Wolfgang Denk <wd@pollux.denx.de>
19932Date: Tue Jan 16 12:46:35 2007 +0100
19933
19934 Update default environment for Solidcard3
19935
Wolfgang Denkf11033e2007-01-15 13:41:04 +010019936commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
19937Author: Stefan Roese <sr@denx.de>
19938Date: Mon Jan 15 09:46:29 2007 +0100
19939
19940 [PATCH] Fix 440SPe rev B detection from previous patch
19941
19942 Signed-off-by: Stefan Roese <sr@denx.de>
19943
19944commit a443d31410c571ee8f970da819a44d698fdd6b1f
19945Author: Heiko Schocher <hs@pollux.denx.de>
19946Date: Sun Jan 14 13:35:31 2007 +0100
19947
19948 [FIX] correct I2C Writes for the LM81 Sensor.
19949
19950 Signed-off-by: Heiko Schocher <hs@denx.de>
19951
19952commit 0bba5452835f19a61204edcda3a58112fd8e2208
19953Author: Wolfgang Denk <wd@pollux.denx.de>
19954Date: Sat Jan 13 11:17:10 2007 +0100
19955
19956 Undo commit 3033ebb2: reset command does not take any arguments
19957
19958 Haiying Wang's modification to the reset command was broken, undo it.
19959
19960 Signed-off-by: Wolfgang Denk <wd@denx.de>
19961
19962commit 95981778cff0038fd9941044d6a3eda810e33258
19963Author: Stefan Roese <sr@denx.de>
19964Date: Sat Jan 13 08:01:03 2007 +0100
19965
19966 [PATCH] Update 440SP(e) cpu revisions
19967
19968 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
19969
19970 Signed-off-by: Stefan Roese <sr@denx.de>
19971
19972commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
19973Author: Stefan Roese <sr@denx.de>
19974Date: Sat Jan 13 07:59:56 2007 +0100
19975
19976 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
19977
19978 Now the board revision and the current PCI bus speed are printed after
19979 the board message.
19980
19981 Also the EBC initialising is now done via defines in the board config
19982 file.
19983
19984 Signed-off-by: Stefan Roese <sr@denx.de>
19985
19986commit 36adff362c2c0141ff8a810d42a7e478f779130f
19987Author: Stefan Roese <sr@denx.de>
19988Date: Sat Jan 13 07:59:19 2007 +0100
19989
19990 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
19991
19992 Now the board revision and the current PCI bus speed are printed after
19993 the board message.
19994
19995 Also the EBC initialising is now done via defines in the board config
19996 file.
19997
19998 Signed-off-by: Stefan Roese <sr@denx.de>
19999
20000commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
20001Author: Stefan Roese <sr@denx.de>
20002Date: Sat Jan 13 07:57:51 2007 +0100
20003
20004 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
20005
20006 Now the board revision and the current PCI bus speed are printed after
20007 the board message.
20008
20009 Signed-off-by: Stefan Roese <sr@denx.de>
20010
Wolfgang Denk6d3e0102007-01-16 18:30:50 +010020011commit ca43ba18e910206ef8063e4b22d282630bff3fd2
20012Author: Heiko Schocher <hs@pollux.denx.de>
20013Date: Thu Jan 11 15:44:44 2007 +0100
20014
20015 Added support for the SOLIDCARD III board from Eurodesign
20016
20017 Signed-off-by: Heiko Schocher <hs@denx.de>
20018
Wolfgang Denkf11033e2007-01-15 13:41:04 +010020019commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
20020Author: Reinhard Thies <Reinhard.Thies@web.de>
20021Date: Wed Jan 10 14:41:14 2007 +0100
20022
20023 Adjusted default environment for cam5200 board.
20024
20025commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
20026Author: Wolfgang Denk <wd@pollux.denx.de>
20027Date: Wed Jan 10 15:35:52 2007 +0100
20028
20029 Update CHANGELOG
20030
Wolfgang Denkbab5a902007-01-10 15:35:52 +010020031commit 787fa15860a57833e50bd30555079a9cd4e519b8
20032Author: Wolfgang Denk <wd@pollux.denx.de>
20033Date: Wed Jan 10 01:28:39 2007 +0100
20034
20035 Fix auto_update for MCC200 board.
20036
20037 The invocation of do_auto_update() is moved to the end of the
20038 misc_init_r() function, after the flash mappings have been
20039 initialized. Please find attached a patch that implements that
20040 change.
20041
20042 Also correct the decoding of the keypad status. With this update, the
20043 key that will trigger the update is Column 2, Row 2.
20044
Wolfgang Denkf11033e2007-01-15 13:41:04 +010020045commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
20046Author: Marian Balakowicz <m8@semihalf.com>
20047Date: Wed Jan 10 00:26:15 2007 +0100
20048
20049 CAM5200 flash driver modifications:
20050 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
20051 - add second build target 'cam5200_niosflash' which still uses custom driver
20052
Wolfgang Denkbab5a902007-01-10 15:35:52 +010020053commit 67fea022fa957f59653b5238c7496f80a6b70432
20054Author: Markus Klotzbuecher <mk@denx.de>
20055Date: Tue Jan 9 16:02:48 2007 +0100
20056
20057 SPC1920: cleanup memory contoller setup
20058
20059commit 8fc2102faa23593c80381437c09f7745a14deb40
20060Author: Markus Klotzbuecher <mk@denx.de>
20061Date: Tue Jan 9 14:57:14 2007 +0100
20062
20063 Fix the cpu speed setup to work with all boards.
20064
20065commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
20066Author: Markus Klotzbuecher <mk@denx.de>
20067Date: Tue Jan 9 14:57:13 2007 +0100
20068
20069 SPC1920: add support for the FM18L08 Ramtron FRAM
20070
20071commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
20072Author: Markus Klotzbuecher <mk@denx.de>
20073Date: Tue Jan 9 14:57:13 2007 +0100
20074
20075 SPC1920: update the HPI register addresses to work with the second
20076 generation of hardware
20077
20078commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
20079Author: Markus Klotzbuecher <mk@creamnet.de>
20080Date: Tue Jan 9 14:57:13 2007 +0100
20081
20082 Miscellanious spc1920 related cleanups
20083
20084commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
20085Author: Markus Klotzbuecher <mk@denx.de>
20086Date: Tue Jan 9 14:57:12 2007 +0100
20087
20088 SPC1920 GO/NOGO led should be set to color red in U-Boot
20089
20090commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
20091Author: Markus Klotzbuecher <mk@creamnet.de>
20092Date: Tue Jan 9 14:57:12 2007 +0100
20093
20094 Add support for the DS3231 RTC
20095
20096commit 8139567b60d678584b05f0718a681f2047c5e14f
20097Author: Markus Klotzbuecher <mk@creamnet.de>
20098Date: Tue Jan 9 14:57:11 2007 +0100
20099
20100 SMC1 uses external CLK4 instead of BRG on spc1920
20101
20102commit d8d9de1a02fbd880b613d607143d1f57342affc7
20103Author: Markus Klotzbuecher <mk@creamnet.de>
20104Date: Tue Jan 9 14:57:10 2007 +0100
20105
20106 Update the SPC1920 CMB PLD driver
20107
20108commit 3f34f869162750e5e999fd140f884f5de952bcfe
20109Author: Markus Klotzbuecher <mk@creamnet.de>
20110Date: Tue Jan 9 14:57:10 2007 +0100
20111
20112 Add / enable I2C support on the spc1920 board
20113
20114commit d28707dbce1e9ac2017ad051da4133bf22b4204f
20115Author: Markus Klotzbuecher <mk@creamnet.de>
20116Date: Tue Jan 9 14:57:10 2007 +0100
20117
20118 Add support for the tms320671x host port interface (HPI)
20119
20120commit f4eb54529bb3664c3a562e488b460fe075f79d67
20121Author: Wolfgang Denk <wd@pollux.denx.de>
20122Date: Sun Jan 7 00:13:11 2007 +0100
20123
20124 Prepare for release 1.2.0
20125
Wolfgang Denkf4eb5452007-01-07 00:13:11 +010020126commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
20127Author: Stefan Roese <sr@denx.de>
20128Date: Sat Jan 6 15:58:09 2007 +0100
20129
20130 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
20131
20132 This patch fixes a problem with an incorrect setup for the refresh
20133 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
20134
20135 Signed-off-by: Stefan Roese <sr@denx.de>
20136
20137commit f16c1da9577f06c5fc08651a4065537407de4635
20138Author: Stefan Roese <sr@denx.de>
20139Date: Sat Jan 6 15:56:13 2007 +0100
20140
20141 [PATCH] Update ALPR board files
20142
20143 This update brings the ALPR board support to the newest version.
20144 It also fixes a problem with the NAND driver.
20145
20146 Signed-off-by: Stefan Roese <sr@denx.de>
20147
20148commit cd1d937f90250a32988c37b2b4af8364d25de8ed
20149Author: Stefan Roese <sr@denx.de>
20150Date: Fri Jan 5 11:46:05 2007 +0100
20151
20152 [PATCH] nand: Fix problem with oobsize calculation
20153
20154 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
20155
20156 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
20157 returns a 0x15. In the code fragment below bits [1:0] determine the
20158 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
20159 next field is also ANDed with 0x3. However this is a one bit field
20160 as defined in the Hynix and Samsung parts in the 4th ID byte that
20161 determins the oobsize, not a two bit field. It works on Samsung as
20162 bits[3:2] are 01. However for the Hynix there is a 11 in these two
20163 bits, so the oob size gets messed up.
20164
20165 I checked the correct linux code and the suggested fix from Brian is
20166 also available in the linux nand mtd driver.
20167
20168 Signed-off-by: Stefan Roese <sr@denx.de>
20169
20170commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
20171Author: Stefan Roese <sr@denx.de>
20172Date: Fri Jan 5 10:40:36 2007 +0100
20173
20174 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
20175
20176 This fix will make the MAL burst disabling patch for the Linux
20177 EMAC driver obsolete.
20178
20179 Signed-off-by: Stefan Roese <sr@denx.de>
20180
20181commit 023889838282b6237b401664f22dd22dfba2c066
20182Author: Stefan Roese <sr@denx.de>
20183Date: Fri Jan 5 10:38:05 2007 +0100
20184
20185 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
20186
20187 This code will optimize the DDR2 controller setup on a board specific
20188 basis.
20189
20190 Note: This code doesn't work right now on the NAND booting image for the
20191 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
20192
20193 Signed-off-by: Stefan Roese <sr@denx.de>
20194
20195commit cce4acbb68398634b8d011ed7bb0d12269c84230
20196Author: Bartlomiej Sieka <tur@semihalf.com>
20197Date: Thu Dec 28 19:08:21 2006 +0100
20198
20199 Few V38B changes:
20200 - fix a typo in V38B config file
20201 - move watchdog initialisation earlier in the boot process
20202 - add "wdt=off" to default kernel command line (disables kernel watchdog)
20203
20204commit 92eb729bad876725aeea908d2addba0800620840
20205Author: Wolfgang Denk <wd@pollux.denx.de>
20206Date: Wed Dec 27 01:26:13 2006 +0100
20207
20208 Fix bug in adaption of Stefano Babic's CFI driver patch.
20209
20210commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
20211Author: Wolfgang Denk <wd@pollux.denx.de>
20212Date: Sun Dec 24 01:42:57 2006 +0100
20213
20214 Minor code cleanup.
20215
20216commit d784fdb05900ada3686d5778783e1fb328e9fb66
20217Author: Stefano Babic <sbabic@denx.de>
20218Date: Tue Dec 12 00:22:42 2006 +0100
20219
20220 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
20221
20222commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
20223Author: Stefan Roese <sr@denx.de>
20224Date: Fri Dec 22 14:29:40 2006 +0100
20225
20226 [PATCH] Fix sequoia flash autodetection (finally correct)
20227
20228 Now 32MByte and 64MByte FLASH is know to work and other
20229 configurations should work too.
20230
20231 Signed-off-by: Stefan Roese <sr@denx.de>
20232
20233commit 82e5236a8b719543643fd26d5827938ab2b94818
20234Author: Wolfgang Denk <wd@pollux.denx.de>
20235Date: Fri Dec 22 10:30:26 2006 +0100
20236
20237 Minor code cleanup; update CHANGELOG.
20238
20239commit fa23044564091f05d9695beb7b5b9a931e7f41a4
20240Author: Heiko Schocher <hs@pollux.denx.de>
20241Date: Thu Dec 21 17:17:02 2006 +0100
20242
20243 Added support for the TQM8272 board from TQ
20244
20245 Signed-off-by: Heiko Schocher <hs@denx.de>
20246
Wolfgang Denkf11033e2007-01-15 13:41:04 +010020247commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
20248Author: Heiko Schocher <hs@pollux.denx.de>
20249Date: Thu Dec 21 16:14:48 2006 +0100
20250
20251 [PATCH] Add support for the UC101 board from MAN.
20252
20253 Signed-off-by: Heiko Schocher <hs@denx.de>
20254
Wolfgang Denk82e52362006-12-22 10:30:26 +010020255commit c84bad0ef60e7055ab0bd49b93069509cecc382a
20256Author: Bartlomiej Sieka <tur@semihalf.com>
20257Date: Wed Dec 20 00:29:43 2006 +0100
20258
20259 Fix to make the baudrate changes immediate for the MCF52x2 family.
20260
20261commit daa6e418bcc0c717752e8de939c213c790286096
20262Author: Bartlomiej Sieka <tur@semihalf.com>
20263Date: Wed Dec 20 00:27:32 2006 +0100
20264
20265 Preliminary support for the iDMR board (ColdFire).
20266
20267commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
20268Author: Andrei Safronov <safronov@pollux.denx.de>
20269Date: Fri Dec 8 16:23:08 2006 +0100
20270
20271 automatic update mechanism
20272
Wolfgang Denk2a26ec42007-04-18 17:07:26 +020020273commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
20274Author: roy zang <tie-fei.zang@freescale.com>
20275Date: Mon Dec 4 17:56:59 2006 +0800
20276
20277 Slight code clean up.
20278 Add comments, delete duplicate define and remove spaces.
20279 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20280
20281commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
20282Author: roy zang <tie-fei.zang@freescale.com>
20283Date: Mon Dec 4 17:54:21 2006 +0800
20284
20285 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
20286 multiplier table can not refect the real PLL clock behavior of these
20287 processors. Please refer to the hardware specification for detailed
20288 information of the corresponding processors.
20289 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20290
20291commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
20292Author: roy zang <tie-fei.zang@freescale.com>
20293Date: Mon Dec 4 14:46:23 2006 +0800
20294
20295 Remove the static MAC address, ip address, server ip, netmask and
20296 gateway ip for network setting.
20297 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20298
20299commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
20300Author: roy zang <tie-fei.zang@freescale.com>
20301Date: Mon Dec 4 14:33:08 2006 +0800
20302
20303 Remove the duplicate memory test code for mpc744ihpc2 board.
20304 If a memory test is needed, please use the functions in
20305 post/memory.c or memtest command.
20306 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20307
20308commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
20309Author: roy zang <tie-fei.zang@freescale.com>
20310Date: Fri Dec 1 19:01:25 2006 +0800
20311
20312 Fix the exception occuring in RAM table search issue.
20313 The original search_one_table() function code can only processes the search
20314 for the exception occurring in FLASH/ROM, because the exception and fixup
20315 table usually locate in FLASH. If the exception address is also in
20316 FLASH, it will be OK.
20317 If the exception occurs in RAM, after the u-boot relocation, a
20318 relocation offset should be added.
20319
20320 clean up the code in cpu/74xx_7xx/cpu.c
20321
20322 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20323
20324commit ee311214e0d216f904feea269599d0934bf71f23
20325Author: roy zang <tie-fei.zang@freescale.com>
20326Date: Fri Dec 1 11:47:36 2006 +0800
20327
20328 Clean up the code according to codestyle:
20329 (1) remove some C++ comments.
20330 (2) remove trailing white space.
20331 (3) remove trailing empty line.
20332 (4) Indentation by table.
20333 (5) remove {} in one line condition.
20334 (6) add space before '(' in function call.
20335 Remove some weird printf () output.
20336 Add necessary comments.
20337 Modified Makefile to support building in a separate directory.
20338
Wolfgang Denk82e52362006-12-22 10:30:26 +010020339commit dd520bf314c7add4183c5191692180f576f96b60
20340Author: Wolfgang Denk <wd@pollux.denx.de>
20341Date: Thu Nov 30 18:02:20 2006 +0100
20342
20343 Code cleanup.
20344
Wolfgang Denkdd520bf2006-11-30 18:02:20 +010020345commit 8d9a8610b8256331132227e9e6585c6bd5742787
20346Author: Wolfgang Denk <wd@pollux.denx.de>
20347Date: Thu Nov 30 01:54:07 2006 +0100
20348
20349 Code cleanup. Update CHANGELOG.
20350
Wolfgang Denk8d9a8612006-11-30 01:54:07 +010020351commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
20352Author: Grant Likely <grant.likely@secretlab.ca>
20353Date: Wed Nov 29 16:23:42 2006 +0100
20354
20355 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
20356
20357 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
20358 not the XLB frequency.
20359
20360 This patch depends on the previous patches for MPC52xx device tree support
20361
20362 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20363 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
20364
20365commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
20366Author: Stefan Roese <sr@denx.de>
20367Date: Wed Nov 29 15:42:37 2006 +0100
20368
20369 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
20370
20371 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
20372 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
20373 quite similar and share the same board directory "prodrive/p3mx"
20374 and the same config file "p3mx.h".
20375
20376 Signed-off-by: Stefan Roese <sr@denx.de>
20377
20378commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
20379Author: Stefan Roese <sr@denx.de>
20380Date: Wed Nov 29 12:53:15 2006 +0100
20381
20382 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
20383
20384 In the bootvx command the load address was only read from the env
20385 variable "loadaddr" and not optionally passed as paramter as described
20386 in the help. This is fixed with this patch. The behaviour is now the
20387 same as in the bootelf command.
20388
20389 Signed-off-by: Stefan Roese <sr@denx.de>
20390
20391commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
20392Author: Stefan Roese <sr@denx.de>
20393Date: Wed Nov 29 12:03:57 2006 +0100
20394
20395 [PATCH] include/ppc440.h minor error affecting interrupts
20396
20397 Fixed include/ppc440.c for UIC address Bug
20398
20399 Corrects bug affecting the addresses for the universal interrupt
20400 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
20401
20402 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
20403 Signed-off-by: Stefan Roese <sr@denx.de>
20404
Wolfgang Denkdd520bf2006-11-30 18:02:20 +010020405commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
20406Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
20407Date: Tue Nov 28 16:17:27 2006 -0600
20408
20409 Make fsl-i2c not conflict with SOFT I2C
20410
20411 Signed-off-by: Timur Tabi <timur@freescale.com>
20412
20413commit 14198bf768fdc958e3c1afd2404e5262208e98d7
20414Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
20415Date: Tue Nov 28 16:17:18 2006 -0600
20416
20417 Fix I2C master address initialization.
20418
20419 Signed-off-by: Timur Tabi <timur@freescale.com>
20420
20421commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
20422Author: Kim Phillips <kim.phillips@freescale.com>
20423Date: Tue Nov 28 23:31:19 2006 -0600
20424
20425 Assign maintainers for mpc8349emds and mpc8360emds
20426
20427 Dave for mpc8360emds, and me for mpc8349emds.
20428
20429commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
20430Author: Kim Phillips <kim.phillips@freescale.com>
20431Date: Tue Nov 28 23:28:33 2006 -0600
20432
20433 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
20434
20435 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
20436 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
20437
20438commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
20439Author: Timur Tabi <timur@freescale.com>
20440Date: Tue Nov 28 12:09:35 2006 -0600
20441
20442 mpc83xx: Miscellaneous code style fixes
20443
20444 Implement various code style fixes and similar changes.
20445
20446 Signed-off-by: Timur Tabi <timur@freescale.com>
20447
Wolfgang Denk8d9a8612006-11-30 01:54:07 +010020448commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
20449Author: Stefan Roese <sr@denx.de>
20450Date: Tue Nov 28 17:55:49 2006 +0100
20451
20452 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
20453
20454 This patch adds the code and configuration necessary to boot with an
20455 arch/powerpc Linux kernel.
20456
20457 Signed-off-by: Grant Likely <grant.likely@gmail.com>
20458 Acked-by: Jon Loeliger <jdl@freescale.com>
20459
20460commit e732faec95a83cb468b4850ae807c8301dde8f6a
20461Author: Stefan Roese <sr@denx.de>
20462Date: Tue Nov 28 16:09:24 2006 +0100
20463
20464 [PATCH] PPC4xx: 440SP Rev. C detection added
20465
20466 Signed-off-by: Stefan Roese <sr@denx.de>
20467
20468commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
20469Author: Stefan Roese <sr@denx.de>
20470Date: Tue Nov 28 11:04:45 2006 +0100
20471
20472 [PATCH] nand: Fix patch merge problem
20473
20474 Signed-off-by: Stefan Roese <sr@denx.de>
20475
Wolfgang Denk2a8dfe02007-03-21 23:26:15 +010020476commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
20477Author: Stefan Roese <sr@denx.de>
20478Date: Tue Nov 28 11:04:45 2006 +0100
20479
20480 [PATCH] nand: Fix patch merge problem
20481
20482 Signed-off-by: Stefan Roese <sr@denx.de>
20483
Wolfgang Denkd2c83f52006-11-27 23:11:18 +010020484commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
20485Author: Wolfgang Denk <wd@pollux.denx.de>
20486Date: Mon Nov 27 22:53:53 2006 +0100
20487
20488 Update CHANGELOG
20489
Wolfgang Denk4f4b6022006-11-27 22:53:53 +010020490commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
20491Author: Stefan Roese <sr@denx.de>
20492Date: Mon Nov 27 17:43:25 2006 +0100
20493
20494 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
20495
20496 Patch below corrects the setting of the zmiifer register, it was
20497 overwritting the register rather than ORing the settings.
20498
20499 Signed-off-by: Neil Wilson <NWilson@airspan.com>
20500 Signed-off-by: Stefan Roese <sr@denx.de>
20501
20502commit d1a72545296800b7e219f93104ad5836f0003d66
20503Author: Stefan Roese <sr@denx.de>
20504Date: Mon Nov 27 17:34:10 2006 +0100
20505
20506 [PATCH] Select NAND embedded environment from board configuration
20507
20508 The current NAND Bootloader setup forces the environment
20509 variables to be in line with the bootloader. This change
20510 enables the configuration to be made in the board include
20511 file instead so that it can be individually enabled.
20512
20513 Signed-off-by: Nick Spence <nick.spence@freescale.com>
20514 Signed-off-by: Stefan Roese <sr@denx.de>
20515
20516commit 15784862857c3c2214498defcfed84ff137fb81e
20517Author: Stefan Roese <sr@denx.de>
20518Date: Mon Nov 27 17:22:19 2006 +0100
20519
20520 [PATCH] nand_wait() timeout fixes
20521
20522 Two fixes for the nand_wait() function in
20523 drivers/nand/nand_base.c:
20524
20525 1. Use correct timeouts. The original timeouts in Linux
20526 source are 400ms and 20ms not 40s and 20s
20527
20528 2. Return correct error value in case of timeout. 0 is
20529 interpreted as OK.
20530
20531 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
20532 Signed-off-by: Stefan Roese <sr@denx.de>
20533
20534commit da5553b095bf04f4f109ad7e565dae3aba47b230
20535Author: Stefan Roese <sr@denx.de>
20536Date: Mon Nov 27 17:04:06 2006 +0100
20537
20538 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
20539
20540 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
Wolfgang Denkf4eb5452007-01-07 00:13:11 +010020541 arguments to bootm. It removes the getenv("disable_of") test that used
Wolfgang Denk4f4b6022006-11-27 22:53:53 +010020542 to be used for this purpose.
20543
20544 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20545 Acked-by: Jon Loeliger <jdl@freescale.com>
20546
20547commit a9398e018593782c5fa7d0741955fc1256b34c1e
20548Author: Wolfgang Denk <wd@pollux.denx.de>
20549Date: Mon Nov 27 15:32:42 2006 +0100
20550
20551 Minor code cleanup. Update CHANGELOG.
20552
Wolfgang Denk8d9a8612006-11-30 01:54:07 +010020553commit 1729b92cde575476684bffe819d0b7791b57bff2
20554Author: Stefan Roese <sr@denx.de>
20555Date: Mon Nov 27 14:52:04 2006 +0100
20556
20557 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
20558
20559 Signed-off-by: Stefan Roese <sr@denx.de>
20560
20561commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
20562Author: Stefan Roese <sr@denx.de>
20563Date: Mon Nov 27 14:49:51 2006 +0100
20564
20565 [PATCH] alpr: remove unused board specific flash driver
20566
20567 Signed-off-by: Stefan Roese <sr@denx.de>
20568
20569commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
20570Author: Stefan Roese <sr@denx.de>
20571Date: Mon Nov 27 14:48:41 2006 +0100
20572
20573 [PATCH] 4xx: Fix problem with board specific reset code
20574
20575 Signed-off-by: Stefan Roese <sr@denx.de>
20576
20577commit ec0c2ec725aec9524a177a77ce75559e644a931a
20578Author: Stefan Roese <sr@denx.de>
20579Date: Mon Nov 27 14:46:06 2006 +0100
20580
20581 [PATCH] Remove testing 4xx enet PHY setup
20582
20583 Signed-off-by: Stefan Roese <sr@denx.de>
20584
20585commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
20586Author: Stefan Roese <sr@denx.de>
20587Date: Mon Nov 27 14:12:17 2006 +0100
20588
20589 [PATCH] Update Prodrive ALPR board support (440GX)
20590
20591 Signed-off-by: Stefan Roese <sr@denx.de>
20592
Wolfgang Denk9986bc32007-08-12 21:34:50 +020020593commit 58b485776698c3d71ec5a215e392123b4c15afa3
20594Author: Markus Klotzbuecher <mk@denx.de>
20595Date: Mon Nov 27 11:51:21 2006 +0100
20596
20597 Add a small README with information on the generic ohci driver.
20598
20599commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
20600Author: Markus Klotzbuecher <mk@denx.de>
20601Date: Mon Nov 27 11:46:46 2006 +0100
20602
20603 Fix some endianness issues related to the generic ohci driver
20604
20605commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
20606Author: Markus Klotzbuecher <mk@denx.de>
20607Date: Mon Nov 27 11:44:58 2006 +0100
20608
20609 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
20610 to choose between the old and the generic OHCI drivers.
20611
20612commit 53e336e9ffc51035bdc4e5867631b3378761b4df
20613Author: Markus Klotzbuecher <mk@denx.de>
20614Date: Mon Nov 27 11:43:09 2006 +0100
20615
20616 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
20617 and adapted board configs TQM5200 and yosemite accordingly. This commit
20618 also makes the maximum number of root hub ports configurable
20619 (CFG_USB_OHCI_MAX_ROOT_PORTS).
20620
Wolfgang Denka9398e02006-11-27 15:32:42 +010020621commit 78d620ebb5871d252270dedfad60c6568993b780
20622Author: Wolfgang Denk <wd@atlas.denx.de>
20623Date: Thu Nov 23 22:58:58 2006 +0100
20624
20625 Updates for TQM5200 modules:
20626 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
20627 - simplify "udate" definitions
20628
20629commit 2053283304eeddf250d109e6791eb6fa4cad14f7
20630Author: Stefan Roese <sr@denx.de>
20631Date: Wed Nov 22 13:20:50 2006 +0100
20632
20633 [PATCH] PPC4xx start.S: Fix for processor errata
20634
20635 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
20636 errata 1.12: 440_33 by moving patch up in code.
20637
20638 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
20639 Signed-off-by: Stefan Roese <sr@denx.de>
20640
20641commit 4ef6251403f637841000e0fef9e832aa01339822
20642Author: Stefan Roese <sr@denx.de>
20643Date: Mon Nov 20 20:39:52 2006 +0100
20644
20645 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
20646
20647 Signed-off-by: Stefan Roese <sr@denx.de>
20648
20649commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
20650Author: Wolfgang Denk <wd@pollux.denx.de>
20651Date: Mon Nov 20 10:28:30 2006 +0100
20652
20653 Update CHANGELOG
20654
Wolfgang Denke4bbd8d2006-11-20 10:28:30 +010020655commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
20656Author: Stefan Roese <sr@denx.de>
20657Date: Mon Nov 13 13:55:24 2006 +0100
20658
20659 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
20660
20661 * Adds support for AMD command set Top Boot flash geometry reversal
20662 * Adds support for reading JEDEC Manufacturer ID and Device ID
20663 * Adds support for displaying command set, manufacturer id and
20664 device ids (flinfo)
20665 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
20666 * Removes outdated change history (refer to git log instead)
20667
20668 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
20669 Signed-off-by: Stefan Roese <sr@denx.de>
20670
20671commit b21b511d4c50408f4853f46f06b601272196223f
20672Author: Wolfgang Denk <wd@pollux.denx.de>
20673Date: Sun Nov 12 21:13:23 2006 +0100
20674
20675 Update CHANGELOG
20676
Wolfgang Denkb21b5112006-11-12 21:13:23 +010020677commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
20678Author: Bartlomiej Sieka <tur@semihalf.com>
20679Date: Sat Nov 11 22:48:22 2006 +0100
20680
20681 Disable the watchdog in the default config for the V38B board.
20682
20683commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
20684Author: Bartlomiej Sieka <tur@semihalf.com>
20685Date: Sat Nov 11 22:43:00 2006 +0100
20686
20687 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
20688 group is enabled for USB earlier (in cpu_init_f() instead of
20689 usb_lowlevel_init()).
20690
20691commit 91650b3e4de688038d4f71279c44858e3e2c6870
20692Author: Wolfgang Denk <wd@pollux.denx.de>
20693Date: Mon Nov 6 17:06:36 2006 +0100
20694
20695 Sequential accesses to non-existent memory must be synchronized,
20696 at least on G2 cores.
20697
20698 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
20699
Wolfgang Denkdd520bf2006-11-30 18:02:20 +010020700commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
20701Author: Timur Tabi <timur@freescale.com>
20702Date: Fri Nov 3 19:15:00 2006 -0600
20703
20704 mpc83xx: Update 83xx to use fsl_i2c.c
20705
20706 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
20707 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
20708 Added multiple I2C bus support to fsl_i2c.c.
20709
20710 Signed-off-by: Timur Tabi <timur@freescale.com>
20711
20712commit d239d74b1c937984bc519083a8e7de373a390f06
20713Author: Timur Tabi <timur@freescale.com>
20714Date: Fri Nov 3 12:00:28 2006 -0600
20715
20716 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
20717
20718 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
20719 tree matches the other 8xxx trees.
20720
20721 Signed-off-by: Timur Tabi <timur@freescale.com>
20722
20723commit f7fb2e703ec9688541416962724adff70a7322cb
20724Author: Kim Phillips <kim.phillips@freescale.com>
20725Date: Thu Nov 2 19:47:11 2006 -0600
20726
20727 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
20728
20729commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
20730Author: Dave Liu <daveliu@freescale.com>
20731Date: Thu Nov 2 18:05:50 2006 -0600
20732
20733 mpc83xx: Fix the incorrect dcbz operation
20734
20735 The 834x rev1.x silicon has one CPU5 errata.
20736
20737 The issue is when the data cache locked with
20738 HID0[DLOCK], the dcbz instruction looks like no-op inst.
20739
20740 The right behavior of the data cache is when the data cache
20741 Locked with HID0[DLOCK], the dcbz instruction allocates
20742 new tags in cache.
20743
20744 The 834x rev3.0 and later and 8360 have not this bug inside.
20745
20746 So, when 834x rev3.0/8360 are working with ECC, the dcbz
20747 instruction will corrupt the stack in cache, the processor will
20748 checkstop reset.
20749
20750 However, the 834x rev1.x can work with ECC with these code,
20751 because the sillicon has this cache bug. The dcbz will not
20752 corrupt the stack in cache.
20753 Really, it is the fault code running on fault sillicon.
20754
20755 This patch fix the incorrect dcbz operation. Instead of
20756 CPU FP writing to initialise the ECC.
20757
20758 CHANGELOG:
20759 * Fix the incorrect dcbz operation instead of CPU FP
20760 writing to initialise the ECC memory. Otherwise, it
20761 will corrupt the stack in cache, The processor will checkstop
20762 reset.
20763
20764 Signed-off-by: Dave Liu <daveliu@freescale.com>
20765
20766commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
20767Author: Kim Phillips <kim.phillips@freescale.com>
20768Date: Wed Nov 1 00:10:40 2006 -0600
20769
20770 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
20771
20772 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
20773 STDOUT_PATH configuration bits to mpc8349emds,
20774 mpc8349itx, and mpc8360emds board code.
20775
20776 redo environment to use bootm with the fdtaddr
20777 for booting ARCH=powerpc kernels by default,
20778 and provide default fdtaddr values.
20779
20780commit 48041365b3420589ad464ebc7752e0053538b729
20781Author: Kim Phillips <kim.phillips@freescale.com>
20782Date: Wed Nov 1 00:07:25 2006 -0600
20783
20784 mpc83xx: change ft code to modify local-mac-address property
20785
20786 Update 83xx OF code to update local-mac-address properties
20787 for ethernet instead of the obsolete 'address' property.
20788
20789commit 9ca880a250870a7d55754291b5591d2b5fe89b54
20790Author: Timur Tabi <timur@freescale.com>
20791Date: Tue Oct 31 21:23:16 2006 -0600
20792
20793 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
20794
20795 This patch also adds an improved I2C set_speed(), which handles all clock
20796 frequencies.
20797
20798 Signed-off-by: Timur Tabi <timur@freescale.com>
20799
20800commit ac4b5622ce050b5ee1e154b98df630d778661632
20801Author: Dave Liu <daveliu@freescale.com>
20802Date: Tue Oct 31 19:54:59 2006 -0600
20803
20804 mpc83xx: add the README.mpc8360emds
20805
20806 add doc/README.mpc8360emds to accompany the new board support
20807
20808commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
20809Author: Dave Liu <daveliu@freescale.com>
20810Date: Fri Nov 3 12:11:15 2006 -0600
20811
20812 mpc83xx: add QE ethernet support
20813
20814 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
20815
20816commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
20817Author: Dave Liu <daveliu@freescale.com>
20818Date: Fri Nov 3 19:33:44 2006 -0600
20819
20820 mpc83xx: Add MPC8360EMDS basic board support
20821
20822 Add support for the Freescale MPC8360EMDS board.
20823 Includes DDR, DUART, Local Bus, PCI.
20824
20825commit 23892e49352de74f7fac36ff90bb1be143d195e3
20826Author: Dave Liu <daveliu@freescale.com>
20827Date: Tue Oct 31 19:30:40 2006 -0600
20828
20829 mpc83xx: add the QUICC Engine (QE) immap file
20830
20831 common QE immap file. Also required for 8360.
20832
20833commit b701652a4992bdcc62fb1a6038a85beef9e55da4
20834Author: Dave Liu <daveliu@freescale.com>
20835Date: Tue Oct 31 19:25:38 2006 -0600
20836
20837 mpc83xx: Add 8360 specifics to 83xx immap
20838
20839 Mainly add QE device dependencies, with appropriate 8360 protection.
20840 Lindent also run.
20841
20842commit 988833324a7fda482c8ac3ca23eb539f8232e404
20843Author: Timur Tabi <timur@freescale.com>
20844Date: Tue Oct 31 19:14:41 2006 -0600
20845
20846 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
20847
20848 PREREQUISITE PATCHES:
20849
20850 * This patch can only be applied after the following patches have been applied:
20851
20852 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
20853 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
20854
20855 CHANGELOG:
20856
20857 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
20858 the clock for the 2nd USB board (Linux kernel will hang otherwise),
20859 and fix the CONFIG_BOOTARGS macro.
20860
20861 Signed-off-by: Timur Tabi <timur@freescale.com>
20862
20863commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
20864Author: Timur Tabi <timur@freescale.com>
20865Date: Tue Oct 31 18:44:42 2006 -0600
20866
20867 mpc83xx: Add support for the MPC8349E-mITX
20868
20869 PREREQUISITE PATCHES:
20870
20871 * This patch can only be applied after the following patches have been applied:
20872
20873 1) DNX#2006090742000024 "Add support for multiple I2C buses"
20874 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
20875 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
20876 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
20877 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
20878
20879 CHANGELOG:
20880
20881 * Add support for the Freescale MPC8349E-mITX reference design platform.
20882 The second TSEC (Vitesse 7385 switch) is not supported at this time.
20883
20884 Signed-off-by: Timur Tabi <timur@freescale.com>
20885
20886commit 183da6d9b446cc12123455844ad1187e2375626f
20887Author: Ben Warren <bwarren@qstreams.com>
20888Date: Tue Sep 12 10:15:53 2006 -0400
20889
20890 Additional MPC8349 support for multibus i2c
20891
20892 Hello,
20893
20894 Here is a patch for a file that was accidentally left out of a previous
20895 attempt.
20896
20897 It accompanies the patch with ticket DNX#2006090742000024
20898
20899 CHANGELOG:
20900 Change PCI initialization to use new multi-bus I2C API.
20901
20902 regards,
20903 Ben
20904
20905commit b24f119d672b709d153ff2ac091d4aa63ec6877d
20906Author: Ben Warren <bwarren@qstreams.com>
20907Date: Thu Sep 7 16:51:04 2006 -0400
20908
20909 Multi-bus I2C implementation of MPC834x
20910
20911 Hello,
20912
20913 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
20914 family and the MPC8349EMDS board in particular.
20915 This patch requires Patch 1 (Add support for multiple I2C buses).
20916 Testing was performed on a 533MHz board.
20917
20918 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
20919
20920 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20921
20922 CHANGELOG:
20923 Implemented driver-level code to support two I2C buses on the
20924 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
20925 are 50kHz, 100kHz and 400kHz on each bus.
20926
20927 regards,
20928 Ben
20929
20930commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
20931Author: Ben Warren <bwarren@qstreams.com>
20932Date: Thu Sep 7 16:50:54 2006 -0400
20933
20934 Add support for multiple I2C buses
20935
20936 Hello,
20937
20938 Attached is a patch providing support for multiple I2C buses at the
20939 command level. The second part of the patch includes an implementation
20940 for the MPC834x CPU and MPC8349EMDS board.
20941
20942 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
20943
20944 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20945
20946 Overview:
20947
20948 1. Include new 'i2c' command (based on USB implementation) using
20949 CONFIG_I2C_CMD_TREE.
20950
20951 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
20952 the commands to change bus number and speed are only available under the
20953 new 'i2c' command mentioned in the first bullet.
20954
20955 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
20956 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
20957 of an array of bus-device pairs. Otherwise, it is an array of uchar.
20958
20959 CHANGELOG:
20960 Added new 'i2c' master command for all I2C interaction. This is
20961 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
20962 setting I2C bus speed as well as changing the active bus if the board
20963 has more than one (conditionally compiled with
20964 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
20965 Updated README.
20966
20967 regards,
20968 Ben
20969
20970commit bed85caf872714ebf53013967a695c9d63acfc68
20971Author: Timur Tabi <timur@freescale.com>
20972Date: Tue Oct 31 18:13:36 2006 -0600
20973
20974 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
20975
20976 CHANGELOG:
20977
20978 * Errata DDR6, which affects all current MPC 834x processors, lists changes
20979 required to maintain compatibility with various types of DDR memory. This
20980 patch implements those changes.
20981
20982 Signed-off-by: Timur Tabi <timur@freescale.com>
20983
20984commit afd6e470f639883002c7c59d562690a5cb0f4865
20985Author: Timur Tabi <timur@freescale.com>
20986Date: Wed Oct 25 18:45:23 2006 -0500
20987
20988 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
20989
20990commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
20991Author: Timur Tabi <timur@freescale.com>
20992Date: Tue Aug 22 17:07:00 2006 -0500
20993
20994 mpc83xx: Add support for variable flash memory sizes on 83xx systems
20995
20996 CHANGELOG:
20997
20998 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
20999 window registers, instead of using a hard-coded value of 8MB.
21000
21001 Signed-off-by: Timur Tabi <timur@freescale.com>
21002
21003commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
21004Author: Tanya Jiang <tanya.jiang@freescale.com>
21005Date: Thu Aug 3 18:38:13 2006 +0800
21006
21007 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
21008
21009 Unified TQM834x variable names with 83xx and consolidated macro
21010 in preparation for the 8360 and other upcoming 83xx devices.
21011
21012 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
21013
21014commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
21015Author: Dave Liu <daveliu@freescale.com>
21016Date: Wed Oct 25 14:41:21 2006 -0500
21017
21018 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
21019
21020 Incorporated the common unified variable names and the changes in preparation
21021 for releasing mpc8360 patches.
21022
21023 Signed-off-by: Dave Liu <daveliu@freescale.com>
21024
21025commit 3894c46c27c64891f93ac04edde86a9fa9758d92
21026Author: Tanya Jiang <tanya.jiang@freescale.com>
21027Date: Thu Aug 3 18:36:02 2006 +0800
21028
21029 mpc83xx: Fix missing build for mpc8349emds pci.c
21030
21031 Make pci build for mpc8349emds
21032
21033 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
21034
21035commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
21036Author: Tanya Jiang <tanya.jiang@freescale.com>
21037Date: Thu Aug 3 18:39:49 2006 +0800
21038
21039 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
21040
21041 Removed unused file resetvec.S for mpc83xx cpu
21042
21043 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
21044
21045commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
21046Author: Nick Spence <Nick.Spence@freescale.com>
21047Date: Sat Sep 30 00:32:59 2006 -0700
21048
21049 NAND Flash verify across block boundaries
21050
21051 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
21052 defined
21053 and the write crosses a block boundary. The pointer to the verification
21054 buffer (bufstart) is not being updated to reflect the starting of the
21055 new
21056 block so the verification of the second block fails.
21057
21058 CHANGELOG:
21059
21060 * Fix NAND FLASH page verification across block boundaries
21061
21062commit f484dc791a3932537213c43c654cc1295c64b84c
21063Author: Nick Spence <nick.spence@freescale.com>
21064Date: Thu Sep 7 07:39:46 2006 -0700
21065
21066 Added RGMII support to the TSECs and Marvell 881111 Phy
21067
21068 Added a phy initialization to adjust the RGMII RX and TX timing
21069 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
21070
21071 Signed-off-by: Nick Spence <nick.spence@freescale.com>
21072
Wolfgang Denk2a26ec42007-04-18 17:07:26 +020021073commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
21074Author: roy zang <tie-fei.zang@freescale.com>
21075Date: Fri Nov 3 13:10:00 2006 +0800
21076
21077 Remove some unused CFG define.
21078 undef CFG_DRAM_TEST
21079
21080commit 99c09c4dec34f77c243bf51bea532e3f339410ad
21081Author: roy zang <tie-fei.zang@freescale.com>
21082Date: Fri Nov 3 13:07:36 2006 +0800
21083
21084 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
21085 Both work. 0xFF000000 seems more reasonable.
21086
Wolfgang Denkb21b5112006-11-12 21:13:23 +010021087commit c59200443072353044aa4bf737a5a60f9a9af231
21088Author: Wolfgang Denk <wd@pollux.denx.de>
21089Date: Thu Nov 2 15:15:01 2006 +0100
21090
21091 Release U-Boot 1.1.6
21092
Wolfgang Denk2a26ec42007-04-18 17:07:26 +020021093commit c1fbe4103a0d6c8957f912af902d705ba67836f2
21094Author: roy zang <tie-fei.zang@freescale.com>
21095Date: Thu Nov 2 19:14:48 2006 +0800
21096
21097 This patch comes from Yuli's posted patch on 8/8/2006
21098 titled "CFI Driver Little-Endian write Issue".
21099
21100 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
21101
21102 If that patch applied, please discard this one.
21103 Until now , I do not see his patch is applied. So please apply this one.
21104
21105 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
21106 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21107
21108commit b825f158e449e1e9cf74c08e572955e122394c96
21109Author: roy zang <tie-fei.zang@freescale.com>
21110Date: Thu Nov 2 19:12:31 2006 +0800
21111
21112 Tsi108 on chip i2c support.
21113
21114 The i2c Interface provides a master-only, serial interface that can be
21115 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
21116 device reset.
21117
21118 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21119 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21120
21121commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
21122Author: roy zang <tie-fei.zang@freescale.com>
21123Date: Thu Nov 2 19:11:06 2006 +0800
21124
21125 Tsi108 on chip pci controller support.
21126
21127 If there is no pci card, the tsi108/109 pci configure read will
21128 cause a machine check exception to the processor. PCI error should
21129 also be cleared after the read.
21130
21131 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21132 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21133
21134commit d1927cee977126e547ceeba23e4f978f377cfb8f
21135Author: roy zang <tie-fei.zang@freescale.com>
21136Date: Thu Nov 2 19:08:55 2006 +0800
21137
21138 Tundra tsi108 on chip Ethernet controller support.
21139
21140 The following is a brief description of the Ethernet controller:
21141 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
21142 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
21143 to manage the two physical connection devices (PHYs). Each Ethernet port
21144 has its own statistics monitor that tracks and reports key interface
21145 statistics. Each port supports a 256-entry hash table for address
21146 filtering. In addition, each port is bridged to the Switch Fabric
21147 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
21148
21149 Each Ethernet port also has a pair of internal Ethernet DMA channels to
21150 support the transmit and receive data flows. The Ethernet DMA channels
21151 use descriptors set up in memory, the memory map of the device, and
21152 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
21153 handles arbitration for the Switch Fabric. The Controller also
21154 has a register businterface for register accesses and status monitor
21155 control.
21156
21157 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
21158 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
21159 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
21160 data flows to and from the Ethernet Controller through the Switch Fabric.
21161
21162 Each Ethernet port uses its transmit and receive DMA channels to manage
21163 data flows through buffer descriptors that are predefined by the
21164 system (the descriptors can exist anywhere in the system memory map).
21165 These descriptors are data structures that point to buffers filled
21166 with data ready to transmit over Ethernet, or they point to empty
21167 buffers ready to receive data from Ethernet.
21168
21169 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21170 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21171
21172commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
21173Author: roy zang <tie-fei.zang@freescale.com>
21174Date: Thu Nov 2 19:01:33 2006 +0800
21175
21176 Tundra tsi108 header file.
21177
21178 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
21179 PowerPC processors that offers numerous system interconnect options for
21180 embedded application designers. The Tsi108 can interconnect 60x or
21181 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
21182 and Flash. Provided the macro define for tsi108 chip.
21183
21184 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21185 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21186
21187commit 87c4db09699c6b89176b31004afcb83eb1585d47
21188Author: roy zang <tie-fei.zang@freescale.com>
21189Date: Thu Nov 2 18:59:15 2006 +0800
21190
21191 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21192 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
21193
21194 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21195 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21196
21197commit 27801b8ab11c61b577e45742a515bb3b23b80241
21198Author: roy zang <tie-fei.zang@freescale.com>
21199Date: Thu Nov 2 18:57:21 2006 +0800
21200
21201 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21202 Make ,config.mk and link file for the mpc7448hpc2 board.
21203
21204 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21205 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21206
21207commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
21208Author: roy zang <tie-fei.zang@freescale.com>
21209Date: Thu Nov 2 18:55:04 2006 +0800
21210
21211 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21212 The mpc7448hpc2 board support header file.
21213
21214 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21215 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21216
21217commit 625bb5ddb50b243f931262ca8c46956409471917
21218Author: roy zang <tie-fei.zang@freescale.com>
21219Date: Thu Nov 2 18:52:21 2006 +0800
21220
21221 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21222 The mpc7448hpc2 board support low level assemble language init code.
21223
21224 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21225 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21226
21227commit 4c52783b3d024e153c4972b97332e314bc3bdc46
21228Author: roy zang <tie-fei.zang@freescale.com>
21229Date: Thu Nov 2 18:49:51 2006 +0800
21230
21231 General code modification for mpc7448hpc2 board support.
21232 1. Add 7447A and 7448 processor support.
21233 2. Add the following flags.
21234
21235 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
21236 (such as by switch on board), this flag should be set.
21237
21238 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
21239 relocates to RAM, this flag should be set.
21240
21241 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
21242 system hang in exception, this flag should be set.
21243
21244 There is a design issue for tsi108/109 pci configure read. When pci scan
21245 the slots, if there is no pci card, the tsi108/9 will cause a machine
21246 check exception for mpc7448 processor.
21247
21248 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21249 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21250
21251commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
21252Author: roy zang <tie-fei.zang@freescale.com>
21253Date: Thu Nov 2 18:34:47 2006 +0800
21254
21255 Add README file for mpc7448hpc2 board.
21256 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21257
Wolfgang Denkb21b5112006-11-12 21:13:23 +010021258commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
21259Author: Bartlomiej Sieka <tur@semihalf.com>
21260Date: Wed Nov 1 02:04:38 2006 +0100
21261
21262 Finish up support for MarelV38B board
21263 - add watchdog support
21264 - enable GPIO_WKUP_7 pin for input
21265 - code cleanup
21266
21267commit ffa150bc90c943ca265170bd1be3f293674dd5c7
21268Author: Bartlomiej Sieka <tur@semihalf.com>
21269Date: Wed Nov 1 01:45:46 2006 +0100
21270
21271 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
21272 * remove warnings when compiling ethaddr.c
21273 * adjust linker script (fixes a crash resulting from incorrect
21274 definition of __u_boot_cmd_start)
21275 - Some MarelV38B code cleanup.
21276
21277commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
21278Author: Bartlomiej Sieka <tur@semihalf.com>
21279Date: Wed Nov 1 01:38:16 2006 +0100
21280
21281 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
21282 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
21283 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
21284 MPC5XXX_WU_GPIO_DATA_O for affected boards.
21285
21286 - Add defintions for some MPC5XXX GPIO pins.
21287
21288commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
21289Author: Bartlomiej Sieka <tur@semihalf.com>
21290Date: Wed Nov 1 01:34:29 2006 +0100
21291
21292 Changed MarelV38B board make target to lowercase. Config file cleanup.
21293
Wolfgang Denkc5920042006-11-02 15:15:01 +010021294commit 1954be6e9c9421b45d0a9d05b10356acc7563150
21295Author: Wolfgang Denk <wd@pollux.denx.de>
21296Date: Sun Oct 29 01:03:51 2006 +0200
21297
21298 Automatically adjust ARFLAGS so "make -s" is really silent.
21299
21300commit fae684e89844856383bdf101440889557df3e6b1
21301Author: Stefan Roese <sr@denx.de>
21302Date: Sat Oct 28 16:45:00 2006 +0200
21303
21304 [PATCH] omap925.c: Remove unused functions
21305
21306 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21307 Signed-off-by: Stefan Roese <sr@denx.de>
21308
21309commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
21310Author: Stefan Roese <sr@denx.de>
21311Date: Sat Oct 28 17:12:58 2006 +0200
21312
21313 [PATCH] Add some missing machtypes for netstar & voiceblue boards
21314
21315 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
21316 numbers in code.
21317
21318 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21319 Signed-off-by: Stefan Roese <sr@denx.de>
21320
21321commit 856f054410cef52d868feb330168b2a4c4091328
21322Author: Stefan Roese <sr@denx.de>
21323Date: Sat Oct 28 15:55:52 2006 +0200
21324
21325 [PATCH] NAND: Partition name support added to NAND subsystem
21326
21327 chpart, nboot and NAND subsystem related commands now accept also partition
21328 name to specify offset.
21329
21330 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21331 Signed-off-by: Stefan Roese <sr@denx.de>
21332
21333commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
21334Author: Wolfgang Denk <wd@pollux.denx.de>
21335Date: Sat Oct 28 02:29:44 2006 +0200
21336
21337 Update CHANGELOG.
21338
Wolfgang Denk07a69a12006-10-28 02:29:44 +020021339commit 2751a95abd1b96911081c357e96a12fa97b40dee
21340Author: Wolfgang Denk <wd@pollux.denx.de>
21341Date: Sat Oct 28 02:29:14 2006 +0200
21342
21343 Enable commandline editing and hush shell on all TQM boards.
21344
21345commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
21346Author: Wolfgang Denk <wd@pollux.denx.de>
21347Date: Sat Oct 28 02:28:02 2006 +0200
21348
21349 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
21350
21351commit 471a7be7a042e95e440f5de969c9765214ae8d6e
21352Author: Wolfgang Denk <wd@denx.de>
21353Date: Sat Oct 28 01:14:32 2006 +0200
21354
21355 Check for illegal character '=' in environment variable names.
21356
21357 Make sure the string passed as variable name does not contain a '='
21358 character. This not only prevents the common error or typing
21359 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
21360 also closes a backdoor which allowed to delete write-protected
21361 environment variables, for example by using "setenv ethaddr=".
21362
21363commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
21364Author: Wolfgang Denk <wd@pollux.denx.de>
21365Date: Sat Oct 28 00:38:39 2006 +0200
21366
21367 Minor code cleanup.
21368
21369commit e11887a77d81077416a2d1c5e0354916fee8c034
21370Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
21371Date: Thu Oct 26 17:55:31 2006 +0200
21372
21373 Don't pass any debug options directly to the assembler
21374
21375 When passing the -g option to gcc, gcc automatically selects a
21376 suitable --g<format> option to pass on to the assembler.
21377 Thus, there's no point in forcing a specific debug option on the
21378 assembler using the -Wa mechanism.
21379
21380 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21381
21382commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
21383Author: Jon Loeliger <jdl@freescale.com>
21384Date: Fri Oct 27 07:47:22 2006 -0500
21385
21386 MPC86xx: Cleaned up unused and conditionally used local variables.
21387
21388 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21389
21390commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
21391Author: Wolfgang Denk <wd@pollux.denx.de>
21392Date: Fri Oct 27 11:55:21 2006 +0200
21393
21394 Fix "ar" flags in some Makefiles to allow for silent "make -s"
21395
21396commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
21397Author: Ben Warren <bwarren@qstreams.com>
21398Date: Thu Oct 26 14:38:25 2006 -0400
21399
21400 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
21401 to a TSEC (e.g. a switch is connected via RMII) or
21402 if the PHY is defective/incorrectly configured.
21403
21404 Signed-off-by: Ben Warren <bwarren@qstreams.com>
21405
21406commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
21407Author: Ben Warren <bwarren@qstreams.com>
21408Date: Thu Oct 26 14:38:25 2006 -0400
21409
21410 Fix TSEC driver: avoid crashes if PHY is not attached
21411 to a TSEC (e.g. a switch is connected via RMII) or
21412 if the PHY is defective/incorrectly configured.
21413
21414 Signed-off-by: Ben Warren <bwarren@qstreams.com>
21415
Ben Warrenb985b5d2006-10-26 14:38:25 -040021416commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
21417Author: Wolfgang Denk <wd@pollux.denx.de>
21418Date: Thu Oct 26 16:24:31 2006 +0200
21419
21420 Code cleanup.
21421
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021422commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
21423Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
21424Date: Wed Oct 25 15:48:59 2006 +0200
21425
21426 Finish up support for the ATSTK1000/ATSTK1002 boards
Ben Warrenb985b5d2006-10-26 14:38:25 -040021427
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021428 Add atstk1002_config target to Makefile and move the AVR32 section
21429 down below Blackfin so that it doesn't end up in the middle of
21430 MIPS.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021431
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021432 Drop the autogenerated linker script thing for now. Will have to
21433 revisit how to handle chips with different flash and RAM layout
21434 later.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021435
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021436 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21437
21438commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
21439Author: Kumar Gala <galak@kernel.crashing.org>
21440Date: Tue Oct 24 23:47:37 2006 -0500
21441
21442 Added support for Multi-Image files that contain a device tree
Ben Warrenb985b5d2006-10-26 14:38:25 -040021443
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021444 If a Multi-Image file contains a third image we try to use it as a
21445 device tree. The device tree image is assumed to be uncompressed in the
Wolfgang Denkf4eb5452007-01-07 00:13:11 +010021446 image file. We automatically allocate space for the device tree in memory
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021447 and provide an 8k pad to allow more than a reasonable amount of growth.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021448
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021449 Additionally, a device tree that was contained in flash will now automatically
21450 get copied to system memory as part of boot. Previously an error was
21451 reported if one tried to boot a device tree that was in flash.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021452
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021453 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21454
Wolfgang Denk4e53a252006-10-25 00:43:17 +020021455commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
21456Author: Wolfgang Denk <wd@denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021457Date: Tue Oct 24 21:35:55 2006 +0200
Wolfgang Denkcf48eb92006-04-16 10:51:58 +020021458
Wolfgang Denk4e53a252006-10-25 00:43:17 +020021459 Switch to automatically generated CHANGELOG file.
21460 (use "make CHANGELOG" to update it from time to time)
Stefan Roeseaf9e1f52006-10-17 06:14:31 +020021461
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021462commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
21463Author: Stefan Roese <sr@denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021464Date: Tue Oct 24 18:06:48 2006 +0200
Wolfgang Denkcf48eb92006-04-16 10:51:58 +020021465
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021466 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
21467 Patch by Stefan Roese, 24 Oct 2006
Marian Balakowicz8318fbf2006-10-23 22:17:05 +020021468
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021469commit 8ae3b713b2286e0c3213b7802062e4c1599010de
21470Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021471Date: Tue Oct 24 17:24:55 2006 +0200
Stefan Roese7ade0c62006-10-24 18:06:48 +020021472
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021473 Merge with /home/wd/git/u-boot/master
Wolfgang Denkba999c52006-10-20 17:54:33 +020021474
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021475commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
21476Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021477Date: Tue Oct 24 15:32:57 2006 +0200
Wolfgang Denkf836e412006-10-20 16:12:14 +020021478
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021479 Code cleanup
Wolfgang Denkf6414712006-10-20 15:51:21 +020021480
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021481commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
21482Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021483Date: Tue Oct 24 14:51:36 2006 +0200
Stefan Roese6a0766e2006-10-20 15:18:51 +020021484
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021485 Move atstk1000 files into vendor specific directory.
21486 Patch by Haavard Skinnemoen, 12 Sep 2006
Stefan Roeseedf0b542006-10-18 15:59:35 +020021487
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021488commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
21489Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021490Date: Tue Oct 24 14:42:37 2006 +0200
Wolfgang Denk3231ea62006-10-18 22:31:08 +020021491
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021492 Add ATSTK1000 and ATSTK1002 board support
21493 Patch by Haavard Skinnemoen, 06 Sep 2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040021494
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021495 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
21496 daughterboard.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021497
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021498 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
21499 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
21500 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
21501 CompactFlash cards. For more information, please see this page:
Ben Warrenb985b5d2006-10-26 14:38:25 -040021502
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021503 http://www.atmel.com/dyn/products/tools.asp?family_id=682
Ben Warrenb985b5d2006-10-26 14:38:25 -040021504
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021505 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
21506 AT32AP7000 chip.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021507
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021508 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Stefan Roesed7762332006-10-12 19:50:17 +020021509
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021510commit f93ae788c3640fcde5db383471d45548ff4060d0
21511Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021512Date: Tue Oct 24 14:31:24 2006 +0200
Stefan Roesee0a46552006-10-12 19:43:29 +020021513
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021514 Add common serial driver for Atmel AT32 and AT91 chips
21515 Patch by Haavard Skinnemoen, 06 Sep 2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040021516
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021517 This is a first attempt at creating a common serial driver for Atmel
21518 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
21519 be possible to support AT91RM9200 and other ARM-based chips with some
21520 minor modifications.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021521
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021522 There's nothing fundamentally AVR32-specific in this driver, but it
21523 does use some features which are currently only defined for the
21524 AT32AP CPU port:
21525 * pm_get_clock_freq: Obtain the clock frequency of a given domain
21526 * gd->console_uart: A "struct device" containing information about
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021527 register mappings, gpio resources and clocks associated with the
21528 UART device.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021529
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021530 For more information about these features, please see the "AT32AP
21531 CPU" patch.
Wolfgang Denk87621bc2006-10-12 11:43:47 +020021532
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021533commit 72a087e04705c26cad982879ebd06b5281bf825a
21534Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021535Date: Tue Oct 24 14:27:35 2006 +0200
Stefan Roese5c34eee2006-10-12 07:04:24 +020021536
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021537 Add AT32AP CPU and AT32AP7000 SoC support
21538 Patch by Haavard Skinnemoen, 06 Sep 2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040021539
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021540 This patch adds support for the AT32AP CPU family and the AT32AP7000
21541 chip, which is the first chip implementing the AVR32 architecture.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021542
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021543 The AT32AP CPU core is a high-performance implementation featuring a
21544 7-stage pipeline, separate instruction- and data caches, and a MMU.
21545 For more information, please see the "AVR32 AP Technical Reference":
Ben Warrenb985b5d2006-10-26 14:38:25 -040021546
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021547 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Ben Warrenb985b5d2006-10-26 14:38:25 -040021548
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021549 In addition to this, the AT32AP7000 chip comes with a large set of
21550 integrated peripherals, many of which are shared with the AT91 series
21551 of ARM-based microcontrollers from Atmel. Full data sheet is
21552 available here:
Ben Warrenb985b5d2006-10-26 14:38:25 -040021553
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021554 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
Ben Warrenb985b5d2006-10-26 14:38:25 -040021555
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021556 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Stefan Roese752d6832006-10-11 16:57:01 +020021557
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021558commit 7b64fef33c66be648826c0ff9758298ef13d0604
21559Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021560Date: Tue Oct 24 14:21:16 2006 +0200
Stefan Roese2255b2d2006-10-10 12:36:02 +020021561
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021562 Add AVR32 architecture support
21563 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
Ben Warrenb985b5d2006-10-26 14:38:25 -040021564
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021565 This patch adds common infrastructure code for the Atmel AVR32
21566 architecture. See doc/README.AVR32 for details.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021567
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021568 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Stefan Roese1a1b7372006-10-09 12:55:38 +020021569
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021570commit 2da2d9a4766063b9848f3a35ad6025499cf87265
21571Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021572Date: Tue Oct 24 13:57:33 2006 +0200
Wolfgang Denkd262a922006-10-09 12:50:41 +020021573
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021574 Use -g instead of -gstabs in AFLAGS_DEBUG
21575 Patch by Haavard Skinnemoen, 30 Aug 2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040021576
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021577 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
21578 matter what the target's preferred debugging format is. This patch
21579 simply replaces -gstabs with -g, so that the default debugging format
21580 for the architecture is used.
Wolfgang Denkd82718f2006-10-09 01:26:14 +020021581
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021582commit 965829872169c2996023840d98e1d85ad148d629
21583Author: Wolfgang Denk <wd@pollux.denx.de>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021584Date: Tue Oct 24 13:55:18 2006 +0200
Wolfgang Denk1d92b2e2006-10-09 01:07:53 +020021585
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021586 Fix/workaround broken dependency handling with make 3.81
21587 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
Wolfgang Denk2b208f52006-10-09 01:02:05 +020021588
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021589commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
21590Author: Marian Balakowicz <m8@semihalf.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021591Date: Mon Oct 23 22:17:05 2006 +0200
Wolfgang Denk511d0c72006-10-09 00:42:01 +020021592
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021593 Fix sequoia separate object direcory building problems.
Wolfgang Denk8d4ac792006-10-09 00:35:30 +020021594
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021595commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
21596Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021597Date: Fri Oct 20 17:16:35 2006 -0500
Wolfgang Denkac611702006-09-20 23:47:49 +020021598
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021599 Use generic I2C register block on 85xx and 86xx.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021600
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021601 Replace private IMMAP I2C structures with generic reg block
21602 and allow 86xx to have multiple I2C device busses.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021603
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021604 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Marian Balakowicz72997122006-10-03 20:28:38 +020021605
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021606commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
21607Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021608Date: Fri Oct 20 15:54:34 2006 -0500
Stefan Roese56fb6ba2006-10-04 07:12:49 +020021609
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021610 Fix compilation warnings on a few 85xx boards.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021611
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021612 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roesed3733252006-10-04 07:12:27 +020021613
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021614commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
21615Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021616Date: Fri Oct 20 15:50:15 2006 -0500
Wolfgang Denkaeec7822006-09-13 10:47:05 +020021617
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021618 Converted all 85xx boards to use a common FSL I2C driver.
21619 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
21620 And removed hard i2c path from a few u-boot.lds scipts too.
21621 Minor whitespace cleanups along the way.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021622
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021623 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denkd214fbb2006-09-13 10:29:32 +020021624
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021625commit 4d45f69e362b05892c9e92a7907e5820995612aa
21626Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021627Date: Thu Oct 19 12:02:24 2006 -0500
Stefan Roese854bc8d2006-09-13 13:51:58 +020021628
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021629 Rewrite a series of goto statements as a sequences of
21630 conditional expressions instead.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021631
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021632 Use consistent return code 0/-1 for good/bad indicators.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021633
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021634 Include one fewer file if the driver isn't used at all.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021635
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021636 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roesed12ae802006-09-12 20:19:10 +020021637
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021638commit 7237c033b02fe295880435f1eb80819a0c987532
21639Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021640Date: Thu Oct 19 11:02:16 2006 -0500
Stefan Roesea73c8db2006-09-12 08:49:07 +020021641
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021642 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
Ben Warrenb985b5d2006-10-26 14:38:25 -040021643
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021644 in an effort to begin to unify the umpteen FSL I2C drivers that
21645 are all otherwise very similar.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021646
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021647 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denka87d46f2006-09-13 10:23:06 +020021648
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021649commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
21650Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021651Date: Thu Oct 19 11:33:52 2006 -0500
Marian Balakowiczbaf31242006-09-07 17:25:40 +020021652
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021653 * Fix a bunch of compiler warnings for gcc 4.0
Ben Warrenb985b5d2006-10-26 14:38:25 -040021654
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021655 Signed-off-by: Matthew McClintock <msm@freescale.com>
Marian Balakowicz5e090542006-09-07 12:12:20 +020021656
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021657commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
21658Author: Stefan Roese <sr@denx.de>
21659Date: Tue Oct 17 06:14:31 2006 +0200
21660
21661 Add monitor functions for indirect access to PPC440 DCR's
21662 Patch by Leonid Baryudin, 12 Oct 2006
21663
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021664commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
21665Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021666Date: Fri Oct 13 16:47:53 2006 -0500
Marian Balakowicz4f0645e2006-09-07 12:05:53 +020021667
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021668 Fixed leading whitespace issues.
21669 Removed spurious LAWAR thing.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021670
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021671 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese2d658962006-09-07 13:09:53 +020021672
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021673commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
21674Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021675Date: Thu Oct 12 10:42:36 2006 -0500
Stefan Roeseefa20582006-09-07 12:48:49 +020021676
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021677 Remove unneeded include files and local variable.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021678
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021679 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese8cacfb82006-09-07 12:23:02 +020021680
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021681commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
21682Author: Grant Likely <grant.likely@secretlab.ca>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021683Date: Tue Oct 10 00:23:32 2006 -0600
Stefan Roese887e2ec2006-09-07 11:51:23 +020021684
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021685 Fix possible uninitialized variable compiler warning.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021686
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021687 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
21688 do_bootm_linux() may be uninitialized. There is no possibility in the
21689 current code that len will get used uninitialized, but this fix follows
21690 the existing convention of setting both len and data to zero at the same
21691 time.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021692
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021693 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Wolfgang Denk0dab03b2006-09-06 23:29:15 +020021694
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021695commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
21696Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021697Date: Wed Oct 11 15:13:01 2006 -0500
Wolfgang Denkf60ba0d2006-09-04 02:01:27 +020021698
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021699 * Fix a bunch of compiler warnings for gcc 4.0
Ben Warrenb985b5d2006-10-26 14:38:25 -040021700
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021701 Signed-off-by: Matthew McClintock <msm@freescale.com>
Wolfgang Denk6741ae92006-09-04 01:03:57 +020021702
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021703commit bf651baa365e5447246aad6a633ccd667cf24a39
21704Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021705Date: Wed Oct 11 10:10:43 2006 -0500
Marian Balakowiczf9328632006-09-01 19:49:50 +020021706
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021707 Move "ar" flags to config.mk to allow for silent "make -s"
Marian Balakowicz24d3d372006-09-01 19:47:42 +020021708
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021709commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
21710Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021711Date: Tue Oct 10 17:19:03 2006 -0500
Marian Balakowicz66080432006-09-01 19:46:22 +020021712
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021713 Coding style changes to remove local varible blocks
21714 and reformat a bit nicer.
Marian Balakowicz4c15ef52006-09-01 19:44:05 +020021715
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021716commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
21717Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021718Date: Tue Oct 10 17:16:04 2006 -0500
Wolfgang Denk360b4102006-09-03 18:17:46 +020021719
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021720 Fix whitespace issues.
Detlev Zundel2c051652006-09-01 15:39:02 +020021721
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021722commit 7b382b7125f2397cce63253df62f183e3dfa2770
21723Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021724Date: Tue Oct 10 17:14:45 2006 -0500
Detlev Zundel2c051652006-09-01 15:39:02 +020021725
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021726 Fix whitespace issues.
Detlev Zundel2c051652006-09-01 15:39:02 +020021727
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021728commit e10390ddd736b0dad1528eec4b0fe35c0827139a
21729Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021730Date: Tue Oct 10 17:06:53 2006 -0500
Detlev Zundel2c051652006-09-01 15:39:02 +020021731
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021732 Fix whitespace issues.
Wolfgang Denk7d0432c2006-08-31 16:46:53 +020021733
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021734commit 89875e96ba3f023157bf50d5f8e33bf254964a76
21735Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021736Date: Tue Oct 10 17:03:43 2006 -0500
Wolfgang Denke8143e72006-08-30 23:09:00 +020021737
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021738 Ran lindent and cleaned up whitespace issues.
21739 Format for 80-columns too.
Wolfgang Denk0fd30252006-08-30 23:02:10 +020021740
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021741commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
21742Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021743Date: Tue Oct 10 17:02:22 2006 -0500
Stefan Roese2b393b02006-08-29 08:05:15 +020021744
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021745 Fix whitespace and 80-col issues.
Stefan Roesef5577aa2006-08-29 08:04:32 +020021746
Wolfgang Denk8d9a8612006-11-30 01:54:07 +010021747commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
21748Author: Stefan Roese <sr@denx.de>
21749Date: Sat Oct 7 11:36:51 2006 +0200
21750
21751 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
21752 Patch by Stefan Roese, 07 Oct 2006
21753
21754commit 5bc528fa4da751d472397b308137238a6465afd2
21755Author: Stefan Roese <sr@denx.de>
21756Date: Sat Oct 7 11:35:25 2006 +0200
21757
21758 Update ALPR code (NAND support working now)
21759 Patch by Stefan Roese, 07 Oct 2006
21760
21761commit 77d5034847d328753b80c46b83f960a14a26f40e
21762Author: Stefan Roese <sr@denx.de>
21763Date: Sat Oct 7 11:33:03 2006 +0200
21764
21765 Remove compile warnings in fpga code
21766 Patch by Stefan Roese, 07 Oct 2006
21767
21768commit f3443867e90d2979a7dd1c65b0d537777e1f9850
21769Author: Stefan Roese <sr@denx.de>
21770Date: Sat Oct 7 11:30:52 2006 +0200
21771
21772 Add CONFIG_BOARD_RESET to configure board specific reset function
21773 Patch by Stefan Roese, 07 Oct 2006
21774
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021775commit f55df18187e7a45cb73fec4370d12135e6691ae1
21776Author: John Traill <john.traill@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021777Date: Fri Sep 29 08:23:12 2006 +0100
Wolfgang Denk21a9cc02006-08-29 10:49:11 +020021778
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021779 Fix missing tCycle/modfreq calculation.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021780
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021781 Signed-off-by: John Traill <john.traill@freescale.com>
Wolfgang Denk16850912006-08-27 18:10:01 +020021782
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021783commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
21784Author: Andy Fleming <afleming@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021785Date: Wed Sep 13 10:33:35 2006 -0500
Wolfgang Denk113f64e2006-08-25 01:38:04 +020021786
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021787 Updated config headers to add default FDT-based booting
Bartlomiej Siekaddde6b72006-08-22 10:38:18 +020021788
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021789commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
21790Author: Andy Fleming <afleming@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021791Date: Wed Sep 13 10:34:18 2006 -0500
Wolfgang Denked1cf842006-08-24 00:26:42 +020021792
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021793 Add support for eTSEC 3 & 4 on 8548 CDS
Ben Warrenb985b5d2006-10-26 14:38:25 -040021794
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021795 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
21796 This will only work on rev 1.3 boards (but doesn't break older boards)
21797 * Cleaned up some comments to reflect the expanded role of tsec
21798 in other systems
Marian Balakowicz6d3bc9b2006-08-18 19:14:46 +020021799
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021800commit 084d648b109c8984f83674043c1a7fa3885ef801
21801Author: Andy Fleming <afleming@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021802Date: Wed Sep 13 10:33:56 2006 -0500
Rafal Jaworowski6fe16a82006-08-18 10:39:11 +020021803
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021804 Added code to support 2.6.18 PCI changes in u-boot
Ben Warrenb985b5d2006-10-26 14:38:25 -040021805
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021806 * Added code to swizzle the IRQ map for the PCI
Wolfgang Denk94568b62006-08-14 23:23:06 +020021807
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021808commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
21809Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021810Date: Tue Sep 19 09:34:10 2006 -0500
Wolfgang Denk2f6fa462006-08-14 23:17:47 +020021811
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021812 Modified makefile for new build mechanism.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021813
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021814 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denkddd5d9d2006-08-14 22:43:13 +020021815
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021816commit d14ba6a798beb753e7a864500414fcc2d198b8bc
21817Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021818Date: Thu Sep 14 08:40:36 2006 -0500
Wolfgang Denk80f0c0f2006-08-14 22:05:26 +020021819
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021820 Handle 86xx SVR values according to the new Reference Manual.
21821 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
21822 by the byte in bits 16-23 instead.
21823 Thanks to Jason Jin for noticing.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021824
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021825 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denkd689e342006-08-14 21:18:21 +020021826
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021827commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
21828Author: Zhang Wei <wei.zhang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021829Date: Mon Aug 28 14:25:31 2006 +0800
Wolfgang Denk0a0f3a42006-08-17 10:48:36 +020021830
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021831 Fixed an OF-tree off-by-one bug when adding a new property name.
21832 This bug will cause the kernel booting to pause a long time.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021833
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021834 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
21835 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
Wolfgang Denk6183bb92006-08-17 00:50:26 +020021836
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021837commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
21838Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021839Date: Tue Aug 29 11:05:09 2006 -0500
Wolfgang Denk463764c2006-08-17 00:36:51 +020021840
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021841 Remove trailing empty lines.
Stefan Roesed8f961b2006-08-07 15:08:44 +020021842
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021843commit cd6d73d5b895a5935ac4fde0a356288142a584e0
21844Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021845Date: Tue Aug 29 09:48:49 2006 -0500
Stefan Roese4f92ed52006-08-07 14:33:32 +020021846
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021847 Remove bogus msync and use volatile asm.
Stefan Roese9ede3cc2006-08-07 14:31:21 +020021848
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021849commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
21850Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021851Date: Tue Aug 29 08:17:14 2006 -0500
Stefan Roesee335496a2006-08-07 14:29:04 +020021852
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021853 Add myself as maintainer for MPC8641HPCN.
Rafal Jaworowski36b904a2006-08-11 12:35:52 +020021854
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021855commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
21856Author: Zhang Wei <wei.zhang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021857Date: Mon Aug 28 14:25:31 2006 +0800
Wolfgang Denkd8519dc2006-08-11 17:33:42 +020021858
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021859 Fixed an OF-tree off-by-one bug when adding a new property name.
21860 This bug will cause the kernel booting to pause a long time.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021861
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021862 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Wolfgang Denk015c2002006-08-11 17:29:38 +020021863
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021864commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
21865Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021866Date: Fri Aug 25 14:38:34 2006 -0400
Rafal Jaworowski692519b2006-08-10 12:43:17 +020021867
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021868 Change ramdiskaddr and dtbaddr
21869 Remove PEX fluff commands.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021870
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021871 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
21872 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denka3d91812006-08-10 01:58:22 +020021873
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021874commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
21875Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021876Date: Wed Aug 23 13:32:45 2006 -0500
Bartlomiej Siekae51aae32006-08-03 23:20:13 +020021877
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021878 * Another small fix for booting with disable_of
Ben Warrenb985b5d2006-10-26 14:38:25 -040021879
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021880 Signed-off-by: Matthew McClintock <msm@freescale.com>
Wolfgang Denk6587f7e2006-08-07 20:28:05 +020021881
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021882commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
21883Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021884Date: Wed Aug 23 11:04:43 2006 -0500
Stefan Roesea2c95a72006-07-28 18:34:58 +020021885
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021886 Cleanup and lindent new AHCI driver.
Stefan Roese193dd952006-07-27 16:14:05 +020021887
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021888commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
21889Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021890Date: Wed Aug 23 19:15:12 2006 +0800
Stefan Roese3ca91222006-07-27 16:11:19 +020021891
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021892 Add AHCI define and sata support for MPC8641HPCN board.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021893
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021894 Signed-off-by:Jason Jin<jason.jin@freescale.com>
Wolfgang Denk4c4aca82006-07-26 10:33:37 +020021895
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021896commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
21897Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021898Date: Wed Aug 23 19:10:44 2006 +0800
Wolfgang Denk4819fad2006-07-23 22:40:51 +020021899
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021900 Add AHCI support to u-boot
Ben Warrenb985b5d2006-10-26 14:38:25 -040021901
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021902 Add AHCI support in u-boot, enable the sata disk controllers which
21903 following the AHCI protocol.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021904
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021905 Signed-off-by:Jason Jin<jason.jin@freescale.com>
Wolfgang Denkfd279962006-07-22 21:45:49 +020021906
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021907commit d8ea2acf5f137cae99417df4f573d036ee384668
21908Author: Zhang Wei <wei.zhang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021909Date: Wed Aug 23 17:54:32 2006 +0800
Wolfgang Denk135ae002006-07-22 01:20:03 +020021910
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021911 Add dtb boot-up parameter to default boot commands.
Ben Warrenb985b5d2006-10-26 14:38:25 -040021912
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021913 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Wolfgang Denk966083e2006-07-21 15:24:56 +020021914
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021915commit b93775c2036b99baa390ea425c4771895bbc63c4
21916Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021917Date: Tue Aug 22 18:26:08 2006 -0500
Wolfgang Denk144f7792006-07-21 15:21:40 +020021918
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021919 Cleanup even more poorly introduced whitespace.
Wolfgang Denkb9365a22006-07-21 11:56:05 +020021920
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021921commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
21922Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021923Date: Tue Aug 22 18:07:00 2006 -0500
Wolfgang Denk87a5c732006-07-21 11:38:33 +020021924
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021925 Cleanup more poorly introduced whitespace.
Wolfgang Denk029b6dc2006-07-21 11:37:40 +020021926
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021927commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
21928Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021929Date: Tue Aug 22 17:54:05 2006 -0500
Wolfgang Denkb9365a22006-07-21 11:56:05 +020021930
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021931 Cleanup poorly introduced whitespace.
Wolfgang Denkb9365a22006-07-21 11:56:05 +020021932
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021933commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
21934Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021935Date: Tue Aug 22 12:25:27 2006 -0500
Wolfgang Denkb9365a22006-07-21 11:56:05 +020021936
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021937 General indent and whitespace cleanups.
Wolfgang Denke6446702006-07-21 11:30:18 +020021938
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021939commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
21940Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021941Date: Tue Aug 22 12:06:18 2006 -0500
Wolfgang Denk53dd6ce2006-07-21 11:29:20 +020021942
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021943 General indent and whitespace cleanups.
Wolfgang Denk0352f172006-07-21 11:24:47 +020021944
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021945commit 41a0e8b304d3ff55fe27a230507aac79684016ac
21946Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021947Date: Tue Aug 22 10:42:21 2006 -0500
Wolfgang Denk311d8022006-07-21 11:20:46 +020021948
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021949 Cleanup compiler warnings.
Wolfgang Denk5078cce2006-07-21 11:16:34 +020021950
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021951commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
21952Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021953Date: Tue Aug 22 09:31:59 2006 -0500
Wolfgang Denk5078cce2006-07-21 11:16:34 +020021954
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021955 Fix disable_of booting
Ben Warrenb985b5d2006-10-26 14:38:25 -040021956
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021957 Signed-off-by: Matthew McClintock <msm@freescale.com>
Wolfgang Denk978b1092006-07-19 18:01:38 +020021958
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021959commit 87a449c8ac396420cb24260f717ea9e6faa82047
21960Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021961Date: Tue Aug 22 09:23:55 2006 -0500
Wolfgang Denk45a212c2006-07-19 17:52:30 +020021962
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021963 Support for FDT in uImage format, error when using FDT from flash
Ben Warrenb985b5d2006-10-26 14:38:25 -040021964
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021965 Signed-off-by: Matthew McClintock <msm@freescale.com>
Wolfgang Denkbd3143f2006-07-19 14:49:35 +020021966
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021967commit 75c299c38369d01addd5e054b8a16217b70f4a86
21968Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021969Date: Tue Aug 15 15:12:55 2006 -0400
Wolfgang Denkedd0b502006-07-19 14:44:03 +020021970
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021971 Unlock cache before kernel starts up for MPC86xx
Wolfgang Denkc786f422006-07-19 14:40:43 +020021972
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021973commit 67256678f00c09b0a7f19e862e5c1847553d31bc
21974Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021975Date: Tue Aug 15 15:13:15 2006 -0400
Wolfgang Denkd053ce62006-07-19 14:23:12 +020021976
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021977 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
Wolfgang Denk89366012006-07-19 14:16:38 +020021978
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021979commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
21980Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021981Date: Tue Aug 15 15:12:55 2006 -0400
Wolfgang Denk5a3dfef2006-07-19 14:13:02 +020021982
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021983 Unlock cache before kernel starts up for MPC86xx
Wolfgang Denk0de7fa52006-07-19 14:07:21 +020021984
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021985commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
21986Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021987Date: Tue Aug 15 15:13:15 2006 -0400
Wolfgang Denkb87dfd22006-07-19 13:50:38 +020021988
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021989 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
Wolfgang Denkf3e06df2006-07-18 17:44:19 +020021990
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021991commit 86c8e17f25e972a7e272950a0735fad84e082b88
21992Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020021993Date: Wed Aug 16 13:59:47 2006 -0500
Bartlomiej Siekaf88a0ae2006-07-13 15:32:16 +020021994
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021995 * Fix disable_of booting
Ben Warrenb985b5d2006-10-26 14:38:25 -040021996
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021997 Signed-off-by: Matthew McClintock <msm@freescale.com>
Wolfgang Denkdbba3992006-07-13 22:32:45 +020021998
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020021999commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
22000Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022001Date: Wed Aug 16 10:54:09 2006 -0500
Wolfgang Denkdbba3992006-07-13 22:32:45 +020022002
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022003 * Support for FDT in uImage format, error when using FDT from flash
Ben Warrenb985b5d2006-10-26 14:38:25 -040022004
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022005 Signed-off-by: Matthew McClintock <msm@freescale.com>
Wolfgang Denkb87dfd22006-07-19 13:50:38 +020022006
Wolfgang Denk8d9a8612006-11-30 01:54:07 +010022007commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
22008Author: Stefan Roese <sr@denx.de>
22009Date: Tue Aug 15 14:22:35 2006 +0200
22010
22011 Add initial support for the ALPR board from Prodrive
22012 NAND needs some additional testing
22013 Patch by Heiko Schocher, 15 Aug 2006
22014
22015commit f0ff4692ff3372dec55074a8eb444943ab095abb
22016Author: Stefan Roese <sr@denx.de>
22017Date: Tue Aug 15 14:15:51 2006 +0200
22018
22019 Add FPGA Altera Cyclone 2 support
22020 Patch by Heiko Schocher, 15 Aug 2006
22021
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022022commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
22023Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022024Date: Mon Aug 14 15:33:38 2006 -0500
Wolfgang Denk87791f32006-07-11 00:23:54 +020022025
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022026 Fix BAT0 to actually be cacheable, non-guarded as documented.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022027
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022028 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk985b9502006-07-10 23:22:43 +020022029
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022030commit 40bc83559db5745681909fd7382ae509567e116d
22031Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022032Date: Wed Aug 9 15:32:16 2006 -0500
Wolfgang Denk9d407992006-07-10 23:07:28 +020022033
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022034 Removed MPC8641HPCN DTS source file from build.
22035 It is no longer linked into U-Boot; its sources are
22036 now located in the kernel tree.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022037
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022038 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Marian Balakowiczedd6cf22006-07-06 21:17:24 +020022039
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022040commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
22041Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022042Date: Wed Jun 28 10:47:03 2006 -0500
Wolfgang Denkcaaeaf92006-07-05 10:42:14 +020022043
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022044 * Switched default PCI speed for 8540 ADS back to 33MHz
Ben Warrenb985b5d2006-10-26 14:38:25 -040022045
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022046 * Added comments and a printf to warn that PCI-X won't
22047 work at 33MHz
22048 Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022049
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022050 Signed-off-by: Andy Fleming <afleming@freescale.com>
Marian Balakowiczce05de22006-07-04 08:47:23 +020022051
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022052commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
22053Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022054Date: Wed Jun 28 10:46:35 2006 -0500
Marian Balakowiczd19206b2006-07-04 01:27:46 +020022055
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022056 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022057
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022058 Signed-off-by: Andy Fleming <afleming@freescale.com>
Marian Balakowiczfbb0b552006-07-04 00:55:47 +020022059
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022060commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
22061Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022062Date: Wed Jun 28 10:46:13 2006 -0500
Marian Balakowiczfe84b482006-07-03 23:42:36 +020022063
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022064 * Added VIA configuration table
Ben Warrenb985b5d2006-10-26 14:38:25 -040022065
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022066 * Added support for PCI2 on CDS
22067 Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022068
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022069 Signed-off-by: Andy Fleming <afleming@freescale.com>
Marian Balakowiczbba68372006-06-30 18:35:04 +020022070
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022071commit c88f9fe66b64247e5b6a38410ba315ca25596d16
22072Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022073Date: Wed Jun 28 10:45:41 2006 -0500
Marian Balakowicz971a5dd2006-06-30 18:23:06 +020022074
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022075 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022076
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022077 Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denk3f7a63e2006-06-30 20:16:37 +020022078
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022079commit 97074ed9655309b64231bc2cee69fe85399f8055
22080Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022081Date: Wed Jun 28 10:45:17 2006 -0500
Wolfgang Denk3f7a63e2006-06-30 20:16:37 +020022082
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022083 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022084
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022085 Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denka63c31c2006-06-26 10:54:52 +020022086
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022087commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
22088Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022089Date: Wed Jun 28 10:44:49 2006 -0500
Heiko Schochercb0fdf32006-05-03 08:34:03 +020022090
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022091 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022092
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022093 Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denkf73e73b2006-06-20 00:12:59 +020022094
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022095commit a4e11558b810ef2cddffdf7b9d86bc1130441960
22096Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022097Date: Wed Jun 28 10:44:23 2006 -0500
Wolfgang Denkb87dfd22006-07-19 13:50:38 +020022098
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022099 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022100
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022101 Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denk0c32d962006-06-16 17:32:31 +020022102
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022103commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
22104Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022105Date: Wed Jun 28 10:43:36 2006 -0500
Wolfgang Denkc12cffc2006-06-16 17:04:45 +020022106
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022107 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022108
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022109 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denkc12cffc2006-06-16 17:04:45 +020022110
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022111commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
22112Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022113Date: Wed Jun 28 10:43:00 2006 -0500
Wolfgang Denkb87dfd22006-07-19 13:50:38 +020022114
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022115 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
Wolfgang Denk10af6d52006-06-16 16:53:06 +020022116
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022117commit 5498d90312aad9f6bdbf047986027c35b03cd163
22118Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022119Date: Wed Jun 28 10:42:24 2006 -0500
Wolfgang Denk14d9ab32006-06-16 16:50:42 +020022120
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022121 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
Wolfgang Denk1ac7e172006-06-16 16:43:33 +020022122
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022123commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
22124Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022125Date: Wed Jun 28 10:41:37 2006 -0500
Wolfgang Denkbc8bb6d2006-06-16 16:40:54 +020022126
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022127 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
Wolfgang Denkbc8bb6d2006-06-16 16:40:54 +020022128
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022129commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
22130Author: John Traill <john.traill@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022131Date: Wed Aug 9 14:33:50 2006 +0100
Wolfgang Denkcebd1fc2006-06-16 16:14:28 +020022132
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022133 Add Rapidio support for the MPC8641HPCN
Ben Warrenb985b5d2006-10-26 14:38:25 -040022134
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022135 Signed-off-by: John Traill <john.traill@freescale.com>
Wolfgang Denkcd65a3d2006-06-16 16:11:34 +020022136
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022137commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
22138Author: John Traill <john.traill@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022139Date: Tue Aug 8 11:32:43 2006 +0100
Wolfgang Denk4bdb53c2006-06-16 15:56:12 +020022140
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022141 Fix caslat calculation
Ben Warrenb985b5d2006-10-26 14:38:25 -040022142
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022143 Signed-off-by: John Traill <john.traill@freescale.com>
Wolfgang Denkb9fff8e2006-06-16 15:52:58 +020022144
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022145commit 709d3073e74153278e7904a70819bbef7df50e1a
22146Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022147Date: Thu Aug 3 16:17:56 2006 -0500
Wolfgang Denk3e9a2992006-06-16 15:47:05 +020022148
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022149 Convert to mac-address in ethernet nodes.
Wolfgang Denke00f41e2006-06-16 15:45:03 +020022150
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022151commit 71748af833ca1017edf1415be376366ff2937d17
22152Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022153Date: Fri Jul 28 12:41:35 2006 -0400
Wolfgang Denk33322402006-06-16 15:40:48 +020022154
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022155 Correct the irq value of DUART2
Wolfgang Denk9e18a4b2006-06-14 16:48:18 +020022156
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022157commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
22158Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022159Date: Fri Jul 28 12:41:41 2006 -0400
Stefan Roesedf02bd12006-06-14 10:18:39 +020022160
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022161 Change the space size of PEX IO in README
Stefan Roeseed4633c2006-06-13 18:55:07 +020022162
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022163commit 239db37c94f7a92941c4465feceb867c609241c5
22164Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022165Date: Fri Jul 28 12:41:18 2006 -0400
Heiko Schocher9acb6262006-04-20 08:42:42 +020022166
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022167 Move get_board_sys_clk to board directory
Scott McNutt9cc83372006-06-08 13:37:39 -040022168
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022169commit 492900b985439fbce1a118afde1e35def870db03
22170Author: John Traill <john.traill@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022171Date: Fri Jul 28 09:03:54 2006 +0100
Scott McNutt1f6ce8f2006-06-08 12:08:12 -040022172
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022173 Fix 8641HPCN pollution
Scott McNutt3d22d0b2006-06-08 12:03:21 -040022174
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022175commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
22176Author: John Traill <john.traill@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022177Date: Fri Jul 28 08:16:06 2006 +0100
Scott McNuttc2ced002006-06-08 11:59:57 -040022178
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022179 Fix 8641HPCN timebase
Wolfgang Denk5d7022b2006-06-09 21:19:21 +020022180
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022181commit c86360b830f1eecd7a72208575dde4f57879faea
22182Author: Zhang Wei <wei.zhang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022183Date: Fri Jul 28 00:01:34 2006 +0800
Wolfgang Denke461a242006-06-07 11:36:02 +020022184
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022185 Fixed OF device tree of mpc86xxhpcn board.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022186
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022187 The changes works in with kernel irq mapping rework.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022188
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022189 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Stefan Roese4526c872006-06-06 10:59:12 +020022190
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022191commit bea3f28d285942bf3f7ab339ce85178ded544225
22192Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022193Date: Wed Jul 12 10:48:05 2006 -0400
Wolfgang Denk2fd9eb52006-06-02 17:04:21 +020022194
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022195 Add support for reading and writing mac addresses to or from ID EEPROM.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022196
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022197 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
22198 With attached patch, we can use command "mac/mac read/mac save/"
22199 to read and write EEPROM under u-boot prompt.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022200
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022201 U-boot will calculate the checksum of EEPROM while bootup,
22202 if it is right, then u-boot will check whether the mac address
22203 of eTSEC0/1/2/3 is availalbe (non-zero).
Ben Warrenb985b5d2006-10-26 14:38:25 -040022204
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022205 If there is mac address availabe in EEPROM, u-boot will use it,
22206 otherewise, u-boot will use the mac address defined in
22207 MPC8641HPCN.h. This matches the requirement to set unique mac address
22208 for each TSEC port.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022209
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022210 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
22211 Signed-off-by: York Sun <yorksun@freescale.com>
Wolfgang Denk2fd9eb52006-06-02 17:04:21 +020022212
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022213commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
22214Author: Jin Zhengxiong <Jason.Jin@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022215Date: Thu Jul 13 10:35:10 2006 -0500
Wolfgang Denk62b8f542006-06-02 11:46:20 +020022216
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022217 Fixed initrd issue by define big RAM
Ben Warrenb985b5d2006-10-26 14:38:25 -040022218
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022219 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
Wolfgang Denk392c2522006-05-30 23:32:44 +020022220
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022221commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
22222Author: Jason Jin <Jason.jin@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022223Date: Fri Jul 7 10:01:45 2006 -0500
Wolfgang Denkb9b24802006-05-30 17:45:30 +020022224
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022225 We made a u-boot patch to fix the hang up issue
22226 when booting filesystem from ramdisk.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022227
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022228 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020022229
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022230commit 38433ccc5850ee70549af0b2bc5b920355ef5388
22231Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022232Date: Wed Jun 28 10:47:03 2006 -0500
Stefan Roese5770a1e2006-05-18 19:21:53 +020022233
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022234 * Switched default PCI speed for 8540 ADS back to 33MHz
22235 * Added comments and a printf to warn that PCI-X won't
22236 work at 33MHz
22237 Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022238
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022239 Signed-off-by: Andy Fleming <afleming@freescale.com>
Marian Balakowiczb62fa912006-05-17 12:18:48 +020022240
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022241commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
22242Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022243Date: Wed Jun 28 10:46:35 2006 -0500
Marian Balakowicz27333f82006-05-17 12:16:26 +020022244
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022245 * Fixed a bug where 8555 PCI code used the old variable and
22246 function names
22247 Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022248
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022249 Signed-off-by: Andy Fleming <afleming@freescale.com>
Stefan Roese56ced702006-05-15 15:11:20 +020022250
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022251commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
22252Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022253Date: Wed Jun 28 10:46:13 2006 -0500
Wolfgang Denk65165252006-05-15 13:52:51 +020022254
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022255 * Added VIA configuration table
22256 * Added support for PCI2 on CDS
22257 Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022258
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022259 Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denk8cba0902006-05-12 16:15:46 +020022260
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022261commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
22262Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022263Date: Wed Jun 28 10:45:41 2006 -0500
Wolfgang Denk977b50f2006-05-10 17:43:20 +020022264
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022265 * Fixed PCI memory definitions
22266 Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022267
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022268 Signed-off-by: Andy Fleming <afleming@freescale.com>
Stefan Roese278bc4b2006-05-10 15:06:58 +020022269
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022270commit 087454609e47295443af793a282cddcd91a5f49c
22271Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022272Date: Wed Jun 28 10:45:17 2006 -0500
Stefan Roesef90a3922006-05-10 15:01:40 +020022273
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022274 * Added support for initializing second PCI bus on 85xx
22275 Patch by Andy Fleming 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022276
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022277 Signed-off-by: Andy Fleming <afleming@freescale.com>
Stefan Roese512f8d52006-05-10 14:10:41 +020022278
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022279commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
22280Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022281Date: Wed Jun 28 10:44:49 2006 -0500
Stefan Roesed1dd22f2006-05-10 11:49:37 +020022282
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022283 * Added PCI-X #defines for PCI-X initialization
22284 Patch by Andy Fleming on 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022285
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022286 Signed-off-by: Andy Fleming <afleming@freescale.com>
Stefan Roese77f63342006-05-10 11:28:48 +020022287
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022288commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
22289Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022290Date: Wed Jun 28 10:44:23 2006 -0500
Stefan Roese6080a0e2006-05-10 10:55:16 +020022291
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022292 * Made sure the code which disables prefetch for PCI devices
22293 sets the size of the prefetch region to 0
22294 Patch by Andy Fleming on 17-Mar-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022295
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022296 Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denk4af099b2006-05-09 13:49:12 +020022297
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022298commit 40d5fa35d02df22580593bf0039ab173367e8ef0
22299Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022300Date: Wed Jun 28 10:43:36 2006 -0500
Marian Balakowicz78b123c2006-05-09 11:54:44 +020022301
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022302 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
22303 Patch by Jon Loeliger 17-Jan-2006
Ben Warrenb985b5d2006-10-26 14:38:25 -040022304
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022305 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Marian Balakowicz6f5155a2006-05-09 11:51:51 +020022306
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022307commit be7e8b0cb5a0c49dc180075b96df296a893bf146
22308Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022309Date: Wed Jun 28 10:43:00 2006 -0500
Marian Balakowiczb75ef852006-05-09 11:45:31 +020022310
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022311 * Removed the oftree.dts for stxxtx in light of the changes
22312 to the flat device tree handling code
22313 Patch by Matthew McClintock 26-June-2006
Marian Balakowiczb4853b72006-05-09 11:43:59 +020022314
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022315commit 1b380ec225665e73959677f3893dc658c5925e05
22316Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022317Date: Wed Jun 28 10:42:24 2006 -0500
Marian Balakowicz0c056f02006-05-09 11:37:13 +020022318
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022319 * Patch to modify ft_build.c to update flat device trees in place
22320 Patch by Matthew McClintock 26-June-2006
Marian Balakowicz483a0cf2006-05-09 11:28:36 +020022321
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022322commit 98a9c4d468a942a09ebe8979bec508017f3e4462
22323Author: Matthew McClintock <msm@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022324Date: Wed Jun 28 10:41:37 2006 -0500
Wolfgang Denkf149d862006-05-05 00:59:28 +020022325
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022326 * Modify bootm command to support booting with flat device trees
22327 Patch by Matthew McClintock 26-June-2006
Kumar Gala8fe9bf62006-04-20 13:45:32 -050022328
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022329commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
22330Author: Jin Zhengxiong <Jason.Jin@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022331Date: Wed Jun 28 08:43:56 2006 -0500
Wolfgang Denk610cf362006-05-03 01:24:04 +020022332
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022333 Change Id to symbolic name for RTL8139
Ben Warrenb985b5d2006-10-26 14:38:25 -040022334
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022335 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Wolfgang Denkda4849f2006-05-03 01:04:58 +020022336
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022337commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
22338Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022339Date: Tue Jun 27 18:12:10 2006 +0800
Wolfgang Denk983bebb2006-05-03 01:00:39 +020022340
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022341 Fix RTL8139 in big endian
Ben Warrenb985b5d2006-10-26 14:38:25 -040022342
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022343 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
22344 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
Wolfgang Denk983bebb2006-05-03 01:00:39 +020022345
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022346commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
22347Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022348Date: Tue Jun 27 18:12:23 2006 +0800
Wolfgang Denk8546e232006-05-02 00:11:25 +020022349
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022350 Fix Tsec bug when no link
Ben Warrenb985b5d2006-10-26 14:38:25 -040022351
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022352 When tftp a non-exist file from the tftp server, u-boot will check
22353 the link of all eth port. The original file will return wrong link
22354 state on the no link ports.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022355
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022356 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Wolfgang Denk3577d3a2006-04-28 21:24:32 +020022357
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022358commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
22359Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022360Date: Tue Jun 27 18:12:02 2006 +0800
dzu@denx.de6ca24c62006-04-21 18:30:47 +020022361
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022362 Fix bug for io_bar size during pci scan
Ben Warrenb985b5d2006-10-26 14:38:25 -040022363
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022364 During the pci scan process, Some devices return bar_reponse with the
22365 highest bytes 0, such as the pci bridge in uli1575 return bar_response
22366 with 0xffffff, So the bar_size should be manually set under 64K.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022367
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022368 Signed-off-by: Jason Jin <jason.jin@freescale.com>
dzu@denx.dea367d422006-04-19 11:52:46 +020022369
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022370commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
22371Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022372Date: Tue Jun 27 18:11:54 2006 +0800
Wolfgang Denk8419c012006-04-18 11:05:03 +020022373
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022374 Enable PCIE1 for MPC8641HPCN board
Ben Warrenb985b5d2006-10-26 14:38:25 -040022375
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022376 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Wolfgang Denkcf48eb92006-04-16 10:51:58 +020022377
Wolfgang Denk9986bc32007-08-12 21:34:50 +020022378commit 99d70e3a47affb9bae041a2caece7cd516e213b3
22379Author: Wolfgang Denk <wd@pollux.denx.de>
22380Date: Mon Jun 26 11:06:00 2006 +0200
22381
22382 More code cleanup
22383
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022384commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
22385Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022386Date: Thu Jun 22 08:51:46 2006 -0500
Wolfgang Denk27e166b2005-12-19 13:02:45 +010022387
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022388 Fix bug in 8641hpcn reset command with no args.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022389
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022390 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
22391 Acked-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk27e166b2005-12-19 13:02:45 +010022392
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022393commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
22394Author: Zhang Wei <wei.zhang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022395Date: Tue Jun 20 17:47:15 2006 +0800
Wolfgang Denkb81a4632006-04-13 16:35:22 +020022396
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022397 Reworked IRQ mapping in OF-tree.
Wolfgang Denkb28a31c2006-04-12 12:26:32 +020022398
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022399commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
22400Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022401Date: Thu Jun 15 21:33:37 2006 -0500
Wolfgang Denkb28a31c2006-04-12 12:26:32 +020022402
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022403 Do not enable address translation on secondary CPUs.
22404 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022405
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022406 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denkb28a31c2006-04-12 12:26:32 +020022407
Wolfgang Denk9986bc32007-08-12 21:34:50 +020022408commit 386eda022473394ad8f36b86f2bdc9b4cb816291
22409Author: Wolfgang Denk <wd@pollux.denx.de>
22410Date: Wed Jun 14 18:14:56 2006 +0200
22411
22412 Code cleanup
22413
22414commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
22415Author: Wolfgang Denk <wd@pollux.denx.de>
22416Date: Wed Jun 14 17:45:53 2006 +0200
22417
22418 Various USB related patches
22419 - Add support for mpc8xx USB device.
22420 - Add support for Common Device Class - Abstract Control Model USB console.
22421 - Add support for flow control in USB slave devices.
22422 - Add support for switching between gserial and cdc_acm using environment.
22423 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
22424 - Update usbcore slightly to ease host enumeration.
22425 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
22426 - Add AdderUSB_config as a defconfig to enable usage of the USB console
22427 by default with the Adder87x U-Boot port.
22428 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
22429
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022430commit 8ecc971618f56029ad99d3516f8b297a6ed58971
22431Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022432Date: Wed Jun 7 10:53:55 2006 -0500
Wolfgang Denk5fbb2cd2006-04-06 11:35:18 +020022433
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022434 Fix a get_board_sys_clk() use-before-def warning.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022435
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022436 Signed-off-by: Jon Loeliger <jdl@jdl.com>
Stefan Roese2662b402006-04-01 13:41:03 +020022437
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022438commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
22439Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022440Date: Wed Jun 7 10:52:49 2006 -0500
Stefan Roese2662b402006-04-01 13:41:03 +020022441
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022442 Allow DTC path to be passed in.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022443
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022444 Signed-off-by: Jon Loeliger <jdl@jdl.com>
Stefan Roese2662b402006-04-01 13:41:03 +020022445
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022446commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
22447Author: Haiying Wang <haiying.wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022448Date: Tue Jun 6 16:54:29 2006 -0400
Stefan Roese2662b402006-04-01 13:41:03 +020022449
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022450 Modify the IRQ of DUART2
Stefan Roese2662b402006-04-01 13:41:03 +020022451
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022452commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
22453Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022454Date: Wed May 31 13:55:35 2006 -0500
Stefan Roese2662b402006-04-01 13:41:03 +020022455
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022456 Review cleanups.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022457
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022458 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese2662b402006-04-01 13:41:03 +020022459
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022460commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
22461Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022462Date: Wed May 31 12:44:44 2006 -0500
Stefan Roese2662b402006-04-01 13:41:03 +020022463
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022464 White space cleanup.
22465 Some 80-column cleanups.
22466 Convert printf() to puts() where possible.
22467 Use #include "spd_sdram.h" as needed.
22468 Enhanced reset command usage message a bit.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022469
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022470 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese35118532006-03-31 15:18:37 +020022471
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022472commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
22473Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022474Date: Wed May 31 11:39:34 2006 -0500
Stefan Roese35118532006-03-31 15:18:37 +020022475
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022476 Removed unneeded local_bus_init() from 8641HPCN board.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022477
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022478 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese35118532006-03-31 15:18:37 +020022479
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022480commit 4d3d729c16c392d2982d3266b659d333c927697d
22481Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022482Date: Wed May 31 11:24:28 2006 -0500
Stefan Roese35118532006-03-31 15:18:37 +020022483
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022484 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022485
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022486 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese35118532006-03-31 15:18:37 +020022487
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022488commit b2a941de060350ad15878d8219825f4950e9bb8e
22489Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022490Date: Wed May 31 10:07:28 2006 -0500
Wolfgang Denkdb28ddb2006-04-03 15:46:10 +020022491
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022492 Remove dead debug code.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022493
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022494 Signed-off-by: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk534ff672006-04-01 15:52:46 +020022495
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022496commit 126aa70f10ba3d20e0a6f4d32328250513b77770
22497Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022498Date: Tue May 30 17:47:00 2006 -0500
Wolfgang Denk534ff672006-04-01 15:52:46 +020022499
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022500 Move mpc86xx PIXIS code to board directory
Ben Warrenb985b5d2006-10-26 14:38:25 -040022501
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022502 First cut at moving the PIXIS platform code out of
22503 the 86xx cpu directory and into board/mpc8641hpcn
22504 where it belongs.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022505
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022506 Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denkd87080b2006-03-31 18:32:53 +020022507
Wolfgang Denk9986bc32007-08-12 21:34:50 +020022508commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
22509Author: Markus Klotzbuecher <mk@denx.de>
22510Date: Tue May 30 16:56:14 2006 +0200
22511
22512 Support generic OHCI support for the s3c24x0 cpu.
22513
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022514commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
22515Author: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022516Date: Tue May 30 09:10:32 2006 -0500
Wolfgang Denkf6dbbe92006-03-25 18:42:54 +010022517
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022518 Improve "reset" command's interaction with watchdog.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022519
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022520 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
22521 "reset altbank wd" will reset another bank WITH watch dog enabled
22522 "diswd" will disable watch dog after u-boot boots up successfully
Ben Warrenb985b5d2006-10-26 14:38:25 -040022523
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022524 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk05d8dce2006-03-23 17:10:30 +010022525
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022526commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
22527Author: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022528Date: Tue May 30 08:51:19 2006 -0500
Wolfgang Denk5725f942006-03-21 01:58:07 +010022529
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022530 Fix two SDRAM setup bugs.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022531
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022532 Fix ECC setup bug.
22533 Enable 1T/2T based on number of DIMMs present.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022534
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022535 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk0b6ba542006-03-19 01:01:51 +010022536
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022537commit d11fec5015334deb2010e36ce00bb118cc5429a5
22538Author: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022539Date: Fri May 26 10:24:48 2006 -0500
Marian Balakowiczd326f4a2006-03-16 15:19:35 +010022540
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022541 Add first draft of the MPC8641HPCN doc/README.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022542
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022543 Signed-off-by: Jon Loeliger <jdl@jdl.com>
Marian Balakowicz97f98002006-03-16 14:35:32 +010022544
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022545commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
22546Author: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022547Date: Fri May 26 10:13:04 2006 -0500
Marian Balakowicz991425f2006-03-14 16:24:38 +010022548
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022549 Added pci@8000 block.
22550 Updated ethernet interrupt mappings (moved up 48).
22551 Cleaned up a few comments.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022552
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022553 Signed-off-by: Jon Loeliger <jdl@jdl.com>
Marian Balakowicz4c8d1ec2006-03-14 16:23:35 +010022554
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022555commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
22556Author: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022557Date: Fri May 26 10:01:16 2006 -0500
Marian Balakowicz61f25152006-03-14 16:14:48 +010022558
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022559 Allow args on reset command.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022560
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022561 Signed-off-by: Jon Loeliger <jdl@jdl.com>
Marian Balakowicz6d8ae5a2006-03-14 16:12:48 +010022562
Wolfgang Denk9986bc32007-08-12 21:34:50 +020022563commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
22564Author: Markus Klotzbuecher <mk@denx.de>
22565Date: Tue May 23 13:38:35 2006 +0200
22566
22567 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
22568 fixes to the latter.
22569
22570commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
22571Author: Markus Klotzbuecher <mk@denx.de>
22572Date: Tue May 23 10:33:11 2006 +0200
22573
22574 More cleanup for the delta board and the generic usb_ohci driver. Added
22575 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
22576 initialization and cleanup hooks respectively.
22577
22578commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
22579Author: Markus Klotzbuecher <mk@denx.de>
22580Date: Mon May 22 16:33:54 2006 +0200
22581
22582 This patch adds USB storage support for the delta board. This is the first
22583 board to make use of a generic OHCI driver, that calls hooks for board
22584 dependant initialization.
22585
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022586commit 14e37081ff3cac7ebe6e93836523429853b6b292
22587Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022588Date: Fri May 19 13:28:39 2006 -0500
Marian Balakowicze24e0f02006-03-14 16:03:46 +010022589
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022590 Change arbitration to round-robin for SMP linux.
Marian Balakowiczcd94ba32006-03-14 16:02:31 +010022591
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022592commit 9a655876e5995be80f49054e2509500e871e4d3a
22593Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022594Date: Fri May 19 13:26:34 2006 -0500
Marian Balakowicza7c66ad2006-03-14 16:01:25 +010022595
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022596 Enable dual DDR controllers and interleaving.
Marian Balakowicz6e53e272006-03-14 15:59:25 +010022597
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022598commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
22599Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022600Date: Fri May 19 13:22:44 2006 -0500
Wolfgang Denk09e4b0c2006-03-17 11:42:53 +010022601
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022602 Update 86xx address map and LAWBARs.
Wolfgang Denkff7fefe2006-03-13 12:37:35 +010022603
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022604commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
22605Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022606Date: Fri May 19 13:14:15 2006 -0500
Stefan Roese15940c92006-03-13 11:16:36 +010022607
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022608 Remove L2 Cache invalidate polling.
Stefan Roese15940c92006-03-13 11:16:36 +010022609
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022610commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
22611Author: Jon Loeliger <jdl@jdl.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022612Date: Fri May 19 12:33:09 2006 -0500
Stefan Roese15940c92006-03-13 11:16:36 +010022613
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022614 Enable 2nd CPU and I2C.
Stefan Roesef3fecfe2006-03-13 09:43:01 +010022615
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022616commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
22617Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022618Date: Mon May 15 07:26:56 2006 -0500
Stefan Roese9a7b4082006-03-13 09:42:28 +010022619
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022620 Update interrupt mapping.
Wolfgang Denk95515302006-03-13 01:00:22 +010022621
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022622commit 6cfea33477b04b63ed47386ed1629529484c33ba
22623Author: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022624Date: Wed May 10 09:38:06 2006 -0500
Wolfgang Denkc15f80e2006-03-13 00:50:48 +010022625
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022626 Remove unneeded INIT_RAM_LOCK cache twiddling.
22627 Correctly tracks r29 as global data pointer now.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022628
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022629 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Wolfgang Denkb38dbd42006-03-13 00:46:05 +010022630
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022631commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
22632Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022633Date: Wed May 10 09:33:07 2006 -0500
Wolfgang Denkf07217c2006-03-12 23:27:46 +010022634
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022635 Remove unnecessary flash.c file.
Wolfgang Denk84c960c2006-03-12 23:17:31 +010022636
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022637commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
22638Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022639Date: Tue May 9 08:23:49 2006 -0500
Wolfgang Denk763b5f32006-03-12 23:13:27 +010022640
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022641 Get MPC8641HPCN flash images working.
Ben Warrenb985b5d2006-10-26 14:38:25 -040022642
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022643 Enable the CFI driver.
22644 Remove bogus LAWBAR7 cruft.
22645 Use correct TEXT_BASE, Fixup load script.
22646 Enable SPD EEPROM during DDR setup.
22647 Use generic RFC 1918 IP addresses by default.
Wolfgang Denkbe5048f2006-03-12 22:50:55 +010022648
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022649commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
22650Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022651Date: Thu Apr 27 10:15:16 2006 -0500
Wolfgang Denkca273812006-03-12 22:45:47 +010022652
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022653 Cleanup whitespaces and style issues.
22654 Removed //-style comments.
22655 Use 80-column lines.
22656 Remove trailing whitespace.
22657 Remove dead code and debug cruft.
Wolfgang Denk8123eee2006-03-12 22:41:33 +010022658
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022659commit a2320a6bf8113a09544c42d160d10ac69d049a03
22660Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022661Date: Thu Apr 27 08:22:39 2006 -0500
Wolfgang Denk7c609082006-03-12 22:14:20 +010022662
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022663 Revert bad PCI prefetch limit change.
Kumar Gala86902b82006-01-12 19:51:38 -060022664
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022665commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
22666Author: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk2b2a40b2006-10-26 16:24:31 +020022667Date: Wed Apr 26 17:58:56 2006 -0500
Kumar Gala2688e2f2006-02-10 15:40:06 -060022668
Wolfgang Denk7c52c4b2006-10-24 21:35:55 +020022669 Initial support for MPC8641 HPCN board.