blob: 633e038ffab261838c2584a9d489ed049882d35b [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001# SPDX-License-Identifier: GPL-2.0+
Tom Rinida58dec2015-11-10 01:06:16 +00002
Tom Rinia79115d2021-11-01 15:16:16 -04003VERSION = 2022
4PATCHLEVEL = 01
Wolfgang Denk211e4752012-07-10 09:21:12 +02005SUBLEVEL =
Tom Rini734ad932021-12-20 11:15:15 -05006EXTRAVERSION = -rc4
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +09007NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +01008
Masahiro Yamada6825a952014-02-04 17:24:28 +09009# *DOCUMENTATION*
10# To see a list of typical targets execute "make help"
11# More info can be located in ./README
12# Comments in this file are targeted only to the developer, do not
13# expect to learn how to build the kernel reading this file.
14
Tom Rini473fc272021-06-17 18:07:25 -040015# Do not use make's built-in rules and variables
16# (this increases performance and avoids hard-to-debug behaviour)
17MAKEFLAGS += -rR
Masahiro Yamada6825a952014-02-04 17:24:28 +090018
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010019# Determine target architecture for the sandbox
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010020include include/host_arch.h
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010021ifeq ("", "$(CROSS_COMPILE)")
22 MK_ARCH="${shell uname -m}"
23else
24 MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^\s*\([^\/]*\/\)*\([^-]*\)-\S*/\2/p'}"
25endif
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010026unexport HOST_ARCH
27ifeq ("x86_64", $(MK_ARCH))
28 export HOST_ARCH=$(HOST_ARCH_X86_64)
29else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
30 export HOST_ARCH=$(HOST_ARCH_X86)
31else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
32 export HOST_ARCH=$(HOST_ARCH_AARCH64)
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010033else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7l"))
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010034 export HOST_ARCH=$(HOST_ARCH_ARM)
35else ifeq ("riscv32", $(MK_ARCH))
36 export HOST_ARCH=$(HOST_ARCH_RISCV32)
37else ifeq ("riscv64", $(MK_ARCH))
38 export HOST_ARCH=$(HOST_ARCH_RISCV64)
39endif
40undefine MK_ARCH
41
Masahiro Yamada6825a952014-02-04 17:24:28 +090042# Avoid funny character set dependencies
43unexport LC_ALL
44LC_COLLATE=C
45LC_NUMERIC=C
46export LC_COLLATE LC_NUMERIC
47
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090048# Avoid interference with shell env settings
49unexport GREP_OPTIONS
50
Masahiro Yamada6825a952014-02-04 17:24:28 +090051# We are using a recursive build, so we need to do a little thinking
52# to get the ordering right.
53#
54# Most importantly: sub-Makefiles should only ever modify files in
55# their own directory. If in some directory we have a dependency on
56# a file in another dir (which doesn't happen often, but it's often
57# unavoidable when linking the built-in.o targets which finally
58# turn into vmlinux), we will call a sub make in that other dir, and
59# after that we are sure that everything which is in that other dir
60# is now up to date.
61#
62# The only cases where we need to modify files which have global
63# effects are thus separated out and done before the recursive
64# descending is started. They are now explicitly listed as the
65# prepare rule.
66
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090067# Beautify output
68# ---------------------------------------------------------------------------
69#
70# Normally, we echo the whole command before executing it. By making
71# that echo $($(quiet)$(cmd)), we now have the possibility to set
72# $(quiet) to choose other forms of output instead, e.g.
73#
74# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
75# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
76#
77# If $(quiet) is empty, the whole command will be printed.
78# If it is set to "quiet_", only the short version will be printed.
79# If it is set to "silent_", nothing will be printed at all, since
80# the variable $(silent_cmd_cc_o_c) doesn't exist.
81#
82# A simple variant is to prefix commands with $(Q) - that's useful
83# for commands that shall be hidden in non-verbose mode.
84#
85# $(Q)ln $@ :<
86#
87# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
88# If KBUILD_VERBOSE equals 1 then the above command is displayed.
89#
Masahiro Yamada6825a952014-02-04 17:24:28 +090090# To put more focus on warnings, be less verbose as default
91# Use 'make V=1' to see the full commands
92
93ifeq ("$(origin V)", "command line")
94 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000095endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090096ifndef KBUILD_VERBOSE
97 KBUILD_VERBOSE = 0
98endif
99
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900100ifeq ($(KBUILD_VERBOSE),1)
101 quiet =
102 Q =
103else
104 quiet=quiet_
105 Q = @
Masahiro Yamada6825a952014-02-04 17:24:28 +0900106endif
107
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900108# If the user is running make -s (silent mode), suppress echoing of
109# commands
110
111ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
112ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
113 quiet=silent_
114endif
115else # make-3.8x
116ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
117 quiet=silent_
118endif
Masahiro Yamada6825a952014-02-04 17:24:28 +0900119endif
120
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900121export quiet Q KBUILD_VERBOSE
Masahiro Yamada6825a952014-02-04 17:24:28 +0900122
Masahiro Yamada9e414032014-02-04 17:24:24 +0900123# kbuild supports saving output files in a separate directory.
124# To locate output files in a separate directory two syntaxes are supported.
125# In both cases the working directory must be the root of the kernel src.
126# 1) O=
127# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +0200128#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900129# 2) Set KBUILD_OUTPUT
130# Set the environment variable KBUILD_OUTPUT to point to the directory
131# where the output files shall be placed.
132# export KBUILD_OUTPUT=dir/to/store/output/files/
133# make
Stefan Roese887e2ec2006-09-07 11:51:23 +0200134#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900135# The O= assignment takes precedence over the KBUILD_OUTPUT environment
136# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000137
Masahiro Yamada9e414032014-02-04 17:24:24 +0900138# KBUILD_SRC is set on invocation of make in OBJ directory
139# KBUILD_SRC is not intended to be used by the regular user (for now)
140ifeq ($(KBUILD_SRC),)
141
142# OK, Make called in directory where kernel src resides
143# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200144ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900145 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200146endif
wdenk7ebf7442002-11-02 23:17:16 +0000147
Masahiro Yamada9e414032014-02-04 17:24:24 +0900148# That's our default target when none is given on the command line
149PHONY := _all
150_all:
151
152# Cancel implicit rules on top Makefile
153$(CURDIR)/Makefile Makefile: ;
154
155ifneq ($(KBUILD_OUTPUT),)
156# Invoke a second make in the output directory, passing relevant variables
157# check that the output directory actually exists
158saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900159KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
160 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900161$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900162 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900163
Tom Rini473fc272021-06-17 18:07:25 -0400164# Look for make include files relative to root of kernel src
165#
166# This does not become effective immediately because MAKEFLAGS is re-parsed
167# once after the Makefile is read. It is OK since we are going to invoke
168# 'sub-make' below.
169MAKEFLAGS += --include-dir=$(CURDIR)
170
Masahiro Yamada9e414032014-02-04 17:24:24 +0900171PHONY += $(MAKECMDGOALS) sub-make
172
173$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
174 @:
175
176sub-make: FORCE
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900177 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
178 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900179
180# Leave processing to above invocation of make
181skip-makefile := 1
182endif # ifneq ($(KBUILD_OUTPUT),)
183endif # ifeq ($(KBUILD_SRC),)
184
185# We process the rest of the Makefile if this is the final invocation of make
186ifeq ($(skip-makefile),)
187
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900188# Do not print "Entering directory ...",
189# but we want to display it when entering to the output directory
190# so that IDEs/editors are able to understand relative filenames.
191MAKEFLAGS += --no-print-directory
192
193# Call a source code checker (by default, "sparse") as part of the
194# C compilation.
195#
196# Use 'make C=1' to enable checking of only re-compiled files.
197# Use 'make C=2' to enable checking of *all* source files, regardless
198# of whether they are re-compiled or not.
199#
Breno Matheus Lima656d8da2019-06-05 18:18:30 +0000200# See the file "doc/sparse.txt" for more details, including
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900201# where to get the "sparse" utility.
202
203ifeq ("$(origin C)", "command line")
204 KBUILD_CHECKSRC = $(C)
205endif
206ifndef KBUILD_CHECKSRC
207 KBUILD_CHECKSRC = 0
208endif
209
210# Use make M=dir to specify directory of external module to build
211# Old syntax make ... SUBDIRS=$PWD is still supported
212# Setting the environment variable KBUILD_EXTMOD take precedence
213ifdef SUBDIRS
214 KBUILD_EXTMOD ?= $(SUBDIRS)
215endif
216
217ifeq ("$(origin M)", "command line")
218 KBUILD_EXTMOD := $(M)
219endif
220
Masahiro Yamada6825a952014-02-04 17:24:28 +0900221# If building an external module we do not care about the all: rule
222# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900223PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900224ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900225_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900226else
227_all: modules
228endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900229
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900230ifeq ($(KBUILD_SRC),)
231 # building in the source tree
232 srctree := .
233else
234 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
235 # building in a subdirectory of the source tree
236 srctree := ..
237 else
238 srctree := $(KBUILD_SRC)
239 endif
240endif
241objtree := .
Masahiro Yamada9e414032014-02-04 17:24:24 +0900242src := $(srctree)
243obj := $(objtree)
244
245VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
246
247export srctree objtree VPATH
248
Wolfgang Denk5013c092008-03-02 22:45:33 +0100249# Make sure CDPATH settings don't interfere
250unexport CDPATH
251
Marian Balakowiczf9328632006-09-01 19:49:50 +0200252#########################################################################
253
wdenk7ebf7442002-11-02 23:17:16 +0000254HOSTARCH := $(shell uname -m | \
255 sed -e s/i.86/x86/ \
256 -e s/sun4u/sparc64/ \
257 -e s/arm.*/arm/ \
258 -e s/sa110/arm/ \
259 -e s/ppc64/powerpc/ \
260 -e s/ppc/powerpc/ \
261 -e s/macppc/powerpc/\
262 -e s/sh.*/sh/)
263
264HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
265 sed -e 's/\(cygwin\).*/cygwin/')
266
267export HOSTARCH HOSTOS
268
wdenk7ebf7442002-11-02 23:17:16 +0000269#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200270
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400271# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100272ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400273CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000274endif
wdenk7ebf7442002-11-02 23:17:16 +0000275
Masahiro Yamada51148792014-07-30 14:08:17 +0900276KCONFIG_CONFIG ?= .config
277export KCONFIG_CONFIG
278
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900279# SHELL used by kbuild
280CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
281 else if [ -x /bin/bash ]; then echo /bin/bash; \
282 else echo sh; fi ; fi)
283
Tom Rini587e4a42020-03-27 11:46:27 -0400284HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
285HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
286HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
287
Jeroen Hofsteeb477fe42014-09-10 20:08:51 +0200288HOSTCC = cc
289HOSTCXX = c++
Tom Rini587e4a42020-03-27 11:46:27 -0400290KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
Simon Glassb47ef6b2020-07-19 13:56:08 -0600291 $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
Tom Rini587e4a42020-03-27 11:46:27 -0400292KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
293KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
294KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900295
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200296# With the move to GCC 6, we have implicitly upgraded our language
297# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
298# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
299# have older compilers as their default, so we make it explicit for
300# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
Tom Rinifa893992018-06-19 23:53:54 -0400301CSTD_FLAG := -std=gnu11
Tom Rini587e4a42020-03-27 11:46:27 -0400302KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200303
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900304ifeq ($(HOSTOS),cygwin)
Tom Rini587e4a42020-03-27 11:46:27 -0400305KBUILD_HOSTCFLAGS += -ansi
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900306endif
307
308# Mac OS X / Darwin's C preprocessor is Apple specific. It
309# generates numerous errors and warnings. We want to bypass it
310# and use GNU C's cpp. To do this we pass the -traditional-cpp
311# option to the compiler. Note that the -traditional-cpp flag
312# DOES NOT have the same semantics as GNU C's flag, all it does
313# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
314#
315# Apple's linker is similar, thanks to the new 2 stage linking
316# multiple symbol definitions are treated as errors, hence the
317# -multiply_defined suppress option to turn off this error.
318#
319ifeq ($(HOSTOS),darwin)
320# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
321DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
322DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
323
324os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
325 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
326
默默ab8fc412019-03-31 16:07:03 +0800327os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
Wolfgang Denk0a50b3c2021-09-27 17:42:38 +0200328 $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
默默ab8fc412019-03-31 16:07:03 +0800329
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900330# Snow Leopards build environment has no longer restrictions as described above
331HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
Tom Rini587e4a42020-03-27 11:46:27 -0400332KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
333KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
Andreas Bießmann1fddd7b2015-02-09 00:06:10 +0100334
Wolfgang Denk0a50b3c2021-09-27 17:42:38 +0200335# macOS Mojave (10.14.X)
默默ab8fc412019-03-31 16:07:03 +0800336# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
Tom Rini587e4a42020-03-27 11:46:27 -0400337KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900338endif
339
Masahiro Yamada6825a952014-02-04 17:24:28 +0900340# Decide whether to build built-in, modular, or both.
341# Normally, just do built-in.
342
343KBUILD_MODULES :=
344KBUILD_BUILTIN := 1
345
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900346# If we have only "make modules", don't compile built-in objects.
347# When we're building modules with modversions, we need to consider
348# the built-in objects during the descend as well, in order to
349# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900350
351ifeq ($(MAKECMDGOALS),modules)
352 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
353endif
354
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900355# If we have "make <whatever> modules", compile modules
356# in addition to whatever we do anyway.
357# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900358
359# U-Boot does not need modules
360#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
361# KBUILD_MODULES := 1
362#endif
363
364#ifeq ($(MAKECMDGOALS),)
365# KBUILD_MODULES := 1
366#endif
367
Simon Glassb51882d2019-09-25 08:56:28 -0600368# Check ths size of a binary:
369# Args:
370# $1: File to check
371# #2: Size limit in bytes (decimal or 0xhex)
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200372define size_check
373 actual=$$( wc -c $1 | awk '{print $$1}'); \
374 limit=$$( printf "%d" $2 ); \
375 if test $$actual -gt $$limit; then \
376 echo "$1 exceeds file size limit:" >&2; \
Tom Rini90037eb2019-10-23 15:39:41 -0400377 echo " limit: $$(printf %#x $$limit) bytes" >&2; \
Simon Glassb51882d2019-09-25 08:56:28 -0600378 echo " actual: $$(printf %#x $$actual) bytes" >&2; \
379 echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200380 exit 1; \
381 fi
382endef
383export size_check
384
Masahiro Yamada6825a952014-02-04 17:24:28 +0900385export KBUILD_MODULES KBUILD_BUILTIN
386export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
387
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900388# We need some generic definitions (do not try to remake the file).
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900389scripts/Kbuild.include: ;
390include scripts/Kbuild.include
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900391
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900392# Make variables (CC, etc...)
393
394AS = $(CROSS_COMPILE)as
395# Always use GNU ld
396ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
397LD = $(CROSS_COMPILE)ld.bfd
398else
399LD = $(CROSS_COMPILE)ld
400endif
401CC = $(CROSS_COMPILE)gcc
402CPP = $(CC) -E
403AR = $(CROSS_COMPILE)ar
404NM = $(CROSS_COMPILE)nm
405LDR = $(CROSS_COMPILE)ldr
406STRIP = $(CROSS_COMPILE)strip
407OBJCOPY = $(CROSS_COMPILE)objcopy
408OBJDUMP = $(CROSS_COMPILE)objdump
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200409LEX = flex
410YACC = bison
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900411AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900412PERL = perl
Stefano Babicb48bfc72017-04-05 17:46:41 +0200413PYTHON ?= python
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200414PYTHON2 = python2
Andrey Zhizhikinf68ed0b2021-05-01 22:12:21 +0200415PYTHON3 ?= python3
Simon Glass93b19652021-09-22 11:34:44 -0600416
417# The devicetree compiler and pylibfdt are automatically built unless DTC is
418# provided. If DTC is provided, it is assumed the pylibfdt is available too.
419DTC_INTREE := $(objtree)/scripts/dtc/dtc
420DTC ?= $(DTC_INTREE)
421DTC_MIN_VERSION := 010406
422
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900423CHECK = sparse
424
425CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
426 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
427
Masahiro Yamada3b612972014-08-31 15:16:53 +0900428KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900429
430KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
431 -Wno-format-security \
Tom Rinifa893992018-06-19 23:53:54 -0400432 -fno-builtin -ffreestanding $(CSTD_FLAG)
Bin Meng5bc11922018-09-16 22:35:28 -0700433KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900434KBUILD_AFLAGS := -D__ASSEMBLY__
Tom Rini587e4a42020-03-27 11:46:27 -0400435KBUILD_LDFLAGS :=
436
437ifeq ($(cc-name),clang)
438ifneq ($(CROSS_COMPILE),)
439CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
440GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
441CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
442GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
443endif
444ifneq ($(GCC_TOOLCHAIN),)
445CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
446endif
447KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
448KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
449KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
450KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
451endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900452
Andy Shevchenko6ace36e2018-08-06 19:00:22 +0300453# Don't generate position independent code
454KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
455KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
456
Masahiro Yamada74241452014-02-24 11:12:09 +0900457# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
458UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
459UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900460
Masahiro Yamada74241452014-02-24 11:12:09 +0900461export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900462export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Tom Rini587e4a42020-03-27 11:46:27 -0400463export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
464export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200465export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
Tom Rini587e4a42020-03-27 11:46:27 -0400466export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900467
Tom Rini587e4a42020-03-27 11:46:27 -0400468export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900469export KBUILD_CFLAGS KBUILD_AFLAGS
470
Tom Rini5972ff02020-03-11 18:11:17 -0400471export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
472
Masahiro Yamada6825a952014-02-04 17:24:28 +0900473# When compiling out-of-tree modules, put MODVERDIR in the module
474# tree rather than in the kernel tree. The kernel tree might
475# even be read-only.
476export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
477
478# Files to ignore in find ... statements
479
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900480export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
481 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
482 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900483export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
484 --exclude CVS --exclude .pc --exclude .hg --exclude .git
485
486# ===========================================================================
487# Rules shared between *config targets and build targets
488
489# Basic helpers built in scripts/
490PHONY += scripts_basic
491scripts_basic:
492 $(Q)$(MAKE) $(build)=scripts/basic
493 $(Q)rm -f .tmp_quiet_recordmcount
494
495# To avoid any implicit rule to kick in, define an empty command.
496scripts/basic/%: scripts_basic ;
497
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900498PHONY += outputmakefile
499# outputmakefile generates a Makefile in the output directory, if using a
500# separate output directory. This allows convenient use of make in the
501# output directory.
502outputmakefile:
503ifneq ($(KBUILD_SRC),)
504 $(Q)ln -fsn $(srctree) source
Tom Rini473fc272021-06-17 18:07:25 -0400505 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900506endif
507
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900508# To make sure we do not include .config for any of the *config targets
509# catch them early, and hand them over to scripts/kconfig/Makefile
510# It is allowed to specify more targets when calling make, including
511# mixing *config targets and build targets.
512# For example 'make oldconfig all'.
513# Detect when mixed targets is specified, and make a second invocation
514# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900515
Masahiro Yamada74241452014-02-24 11:12:09 +0900516version_h := include/generated/version_autogenerated.h
517timestamp_h := include/generated/timestamp_autogenerated.h
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +0100518defaultenv_h := include/generated/defaultenv_autogenerated.h
Michal Simekdacec832020-02-18 15:03:13 +0100519dt_h := include/generated/dt.h
Simon Glass86b9c3e2021-10-21 21:08:46 -0600520env_h := include/generated/environment.h
Masahiro Yamada74241452014-02-24 11:12:09 +0900521
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900522no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900523 help %docs check% coccicheck \
Simon Glass76160802020-04-17 18:08:59 -0600524 ubootversion backup tests check qcheck tcheck
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900525
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900526config-targets := 0
527mixed-targets := 0
528dot-config := 1
529
530ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
531 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
532 dot-config := 0
533 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900534endif
535
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900536ifeq ($(KBUILD_EXTMOD),)
537 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
538 config-targets := 1
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900539 ifneq ($(words $(MAKECMDGOALS)),1)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900540 mixed-targets := 1
541 endif
542 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900543endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900544
545ifeq ($(mixed-targets),1)
546# ===========================================================================
547# We're called with mixed targets (*config and build targets).
548# Handle them one by one.
549
Masahiro Yamadae7734402014-08-05 15:56:44 +0900550PHONY += $(MAKECMDGOALS) __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900551
Masahiro Yamadae7734402014-08-05 15:56:44 +0900552$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900553 @:
554
Masahiro Yamadae7734402014-08-05 15:56:44 +0900555__build_one_by_one:
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900556 $(Q)set -e; \
557 for i in $(MAKECMDGOALS); do \
558 $(MAKE) -f $(srctree)/Makefile $$i; \
559 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900560
561else
562ifeq ($(config-targets),1)
563# ===========================================================================
564# *config targets only - make sure prerequisites are updated, and descend
565# in scripts/kconfig to make the *config target
566
Masahiro Yamada51148792014-07-30 14:08:17 +0900567KBUILD_DEFCONFIG := sandbox_defconfig
568export KBUILD_DEFCONFIG KBUILD_KCONFIG
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900569
Masahiro Yamada51148792014-07-30 14:08:17 +0900570config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900571 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada51148792014-07-30 14:08:17 +0900572
573%config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900574 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900575
576else
577# ===========================================================================
578# Build targets only - this includes vmlinux, arch specific targets, clean
579# targets and others. In general all targets except *config targets.
580
Masahiro Yamada61304db2017-01-30 11:12:07 +0900581# Additional helpers built in scripts/
582# Carefully list dependencies so we do not try to build scripts twice
583# in parallel
584PHONY += scripts
Tom Rini473fc272021-06-17 18:07:25 -0400585scripts: scripts_basic scripts_dtc include/config/auto.conf
Masahiro Yamada61304db2017-01-30 11:12:07 +0900586 $(Q)$(MAKE) $(build)=$(@)
587
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900588ifeq ($(dot-config),1)
589# Read in config
Masahiro Yamada51148792014-07-30 14:08:17 +0900590-include include/config/auto.conf
591
592# Read in dependencies to all Kconfig* files, make sure to run
593# oldconfig if changes are detected.
594-include include/config/auto.conf.cmd
595
596# To avoid any implicit rule to kick in, define an empty command
597$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
598
599# If .config is newer than include/config/auto.conf, someone tinkered
600# with it and forgot to run make oldconfig.
601# if auto.conf.cmd is missing then we are probably in a cleaned tree so
602# we execute the config step to be sure to catch updated Kconfig files
603include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200604 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900605 @# If the following part fails, include/config/auto.conf should be
606 @# deleted so "make silentoldconfig" will be re-run on the next build.
607 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
608 { rm -f include/config/auto.conf; false; }
609 @# include/config.h has been updated after "make silentoldconfig".
610 @# We need to touch include/config/auto.conf so it gets newer
611 @# than include/config.h.
612 @# Otherwise, 'make silentoldconfig' would be invoked twice.
613 $(Q)touch include/config/auto.conf
Masahiro Yamada51148792014-07-30 14:08:17 +0900614
Masahiro Yamada0b588de2019-01-10 23:11:39 +0900615u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
Philipp Tomsich0d982c52017-07-05 17:30:40 +0200616 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
617
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900618-include include/autoconf.mk
619-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900620
Masahiro Yamada51148792014-07-30 14:08:17 +0900621# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
622# is up-to-date. When we switch to a different board configuration, old CONFIG
623# macros are still remaining in include/config/auto.conf. Without the following
624# gimmick, wrong config.mk would be included leading nasty warnings/errors.
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900625ifneq ($(wildcard $(KCONFIG_CONFIG)),)
626ifneq ($(wildcard include/config/auto.conf),)
627autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
628 include/config/auto.conf)
629ifeq ($(autoconf_is_old),)
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900630include config.mk
631include arch/$(ARCH)/Makefile
Masahiro Yamadaced07152014-02-04 17:24:21 +0900632endif
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900633endif
634endif
Simon Glassfada9e22013-04-20 08:42:36 +0000635
Simon Glassbb1ae552016-11-07 08:47:07 -0700636# These are set by the arch-specific config.mk. Make sure they are exported
637# so they can be used when building an EFI application.
638export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
639export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
640export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
641export CFLAGS_EFI # Compiler flags to add when building EFI app
642export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
643export EFI_TARGET # binutils target if EFI is natively supported
644
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000645# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
646# that (or fail if absent). Otherwise, search for a linker script in a
647# standard location.
648
649ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900650 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000651 ifdef CONFIG_SYS_LDSCRIPT
652 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900653 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000654 endif
655endif
656
Simon Glassee601972011-11-21 10:49:37 +0000657# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000658ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000659 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900660 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000661 endif
662 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900663 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000664 endif
665 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900666 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000667 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000668endif
669
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900670else
Masahiro Yamada51148792014-07-30 14:08:17 +0900671# Dummy target needed, because used as prerequisite
672include/config/auto.conf: ;
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900673endif # $(dot-config)
674
Chris Zankelde5e5ce2016-08-10 18:36:43 +0300675#
676# Xtensa linker script cannot be preprocessed with -ansi because of
677# preprocessor operations on strings that don't make C identifiers.
678#
679ifeq ($(CONFIG_XTENSA),)
680LDPPFLAGS += -ansi
681endif
682
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900683ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
684KBUILD_CFLAGS += -Os
685else
686KBUILD_CFLAGS += -O2
687endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900688
Marek Behúnc1094982021-05-20 13:24:03 +0200689LTO_CFLAGS :=
690LTO_FINAL_LDFLAGS :=
691export LTO_CFLAGS LTO_FINAL_LDFLAGS
692ifdef CONFIG_LTO
693 ifeq ($(cc-name),clang)
694 LTO_CFLAGS += -flto
695 LTO_FINAL_LDFLAGS += -flto
696
697 AR = $(shell $(CC) -print-prog-name=llvm-ar)
698 NM = $(shell $(CC) -print-prog-name=llvm-nm)
699 else
700 NPROC := $(shell nproc 2>/dev/null || echo 1)
701 LTO_CFLAGS += -flto=$(NPROC)
702 LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
703
704 # use plugin aware tools
705 AR = $(CROSS_COMPILE)gcc-ar
706 NM = $(CROSS_COMPILE)gcc-nm
707 endif
708
709 CFLAGS_NON_EFI += $(LTO_CFLAGS)
710
711 KBUILD_CFLAGS += $(LTO_CFLAGS)
712endif
713
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200714ifeq ($(CONFIG_STACKPROTECTOR),y)
715KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
716CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
717else
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900718KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200719endif
Prabhakar Kushwaha687a7512015-07-02 12:00:17 +0530720KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900721
Tom Rini473fc272021-06-17 18:07:25 -0400722# disable pointer signed / unsigned warnings in gcc 4.0
723KBUILD_CFLAGS += -Wno-pointer-sign
724
Tom Rini587e4a42020-03-27 11:46:27 -0400725# disable stringop warnings in gcc 8+
726KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
727
Tom Rinic48b7812021-05-03 16:48:57 -0400728KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
729KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
730KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
731
Tom Rini443f2232020-05-14 08:30:02 -0400732# Enabled with W=2, disabled by default as noisy
733KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
734
Masahiro Yamada1eb2e712018-04-16 13:18:31 +0900735# change __FILE__ to the relative path from the srctree
736KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
737
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900738KBUILD_CFLAGS += -g
739# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
740# option to the assembler.
741KBUILD_AFLAGS += -g
742
743# Report stack usage if supported
Alexey Brodkin948071b2018-04-02 12:18:02 +0300744# ARC tools based on GCC 7.1 has an issue with stack usage
745# with naked functions, see commit message for more details
746ifndef CONFIG_ARC
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900747ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
748 KBUILD_CFLAGS += -fstack-usage
749endif
Alexey Brodkin948071b2018-04-02 12:18:02 +0300750endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900751
752KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
Andy Shevchenko53dc8ae2019-11-29 19:47:59 +0200753KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
754
Tom Rini473fc272021-06-17 18:07:25 -0400755ifdef CONFIG_CC_IS_CLANG
Tom Rini4760fe22018-04-22 10:20:50 -0400756KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
757KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
758KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
Tom Rini587e4a42020-03-27 11:46:27 -0400759KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
760# Quiet clang warning: comparison of unsigned expression < 0 is always false
761KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
762# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
763# source of a reference will be _MergedGlobals and not on of the whitelisted names.
764# See modpost pattern 2
765KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
Tom Rini4760fe22018-04-22 10:20:50 -0400766KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
Tom Rini473fc272021-06-17 18:07:25 -0400767endif
Tom Rini587e4a42020-03-27 11:46:27 -0400768
769# These warnings generated too much noise in a regular build.
770# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
771KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900772
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900773# Prohibit date/time macros, which would make the build non-deterministic
774KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
775
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900776include scripts/Makefile.extrawarn
Masahiro Yamada6419e142014-08-05 15:56:43 +0900777
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900778# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
779KBUILD_CPPFLAGS += $(KCPPFLAGS)
780KBUILD_AFLAGS += $(KAFLAGS)
781KBUILD_CFLAGS += $(KCFLAGS)
782
Simon Glassb47ef6b2020-07-19 13:56:08 -0600783KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
784
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900785# Use UBOOTINCLUDE when you must reference the include/ directory.
786# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900787UBOOTINCLUDE := \
Heinrich Schuchardt0053d262020-04-10 11:10:32 +0200788 -Iinclude \
789 $(if $(KBUILD_SRC), -I$(srctree)/include) \
790 $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
791 $(if $(CONFIG_HAS_THUMB2), \
792 $(if $(CONFIG_CPU_V7M), \
793 -I$(srctree)/arch/arm/thumb1/include), \
794 -I$(srctree)/arch/arm/thumb1/include)) \
795 -I$(srctree)/arch/$(ARCH)/include \
796 -include $(srctree)/include/linux/kconfig.h
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900797
798NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900799
800# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900801cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
802 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900803c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
804
wdenk7ebf7442002-11-02 23:17:16 +0000805#########################################################################
806# U-Boot objects....order is important (i.e. start must be first)
807
Masahiro Yamada9e414032014-02-04 17:24:24 +0900808HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200809
Simon Glass5f57b002021-07-10 21:14:22 -0600810libs-$(CONFIG_API) += api/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900811libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
Simon Glass19a91f22021-10-14 12:47:54 -0600812libs-y += boot/
Simon Glass5f57b002021-07-10 21:14:22 -0600813libs-y += cmd/
814libs-y += common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900815libs-$(CONFIG_OF_EMBED) += dts/
Simon Glass5f57b002021-07-10 21:14:22 -0600816libs-y += env/
817libs-y += lib/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900818libs-y += fs/
819libs-y += net/
820libs-y += disk/
821libs-y += drivers/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900822libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
Shengzhou Liub9e745b2016-08-26 18:30:39 +0800823libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
Ley Foon Tan5918afd2019-05-06 09:55:59 +0800824libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
Vignesh Raghavendra7e91f6c2019-10-01 17:26:33 +0530825libs-y += drivers/usb/cdns3/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530826libs-y += drivers/usb/dwc3/
Sriram Dash93eb8f32016-04-05 14:41:19 +0530827libs-y += drivers/usb/common/
Simon Glass019808f2015-03-25 12:22:37 -0600828libs-y += drivers/usb/emul/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900829libs-y += drivers/usb/eth/
Pali Rohár4cc53ef2021-02-07 14:50:03 +0100830libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
Jean-Jacques Hiblotdb17a922019-01-10 15:44:14 +0100831libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
832libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
Tom Rinib7ad7212021-06-30 13:09:49 -0400833libs-y += drivers/usb/host/
Chunfeng Yune09b88c2020-10-16 11:38:39 +0800834libs-y += drivers/usb/mtu3/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900835libs-y += drivers/usb/musb/
836libs-y += drivers/usb/musb-new/
837libs-y += drivers/usb/phy/
838libs-y += drivers/usb/ulpi/
Simon Glass50fbd5c2019-12-28 10:44:51 -0700839ifdef CONFIG_POST
840libs-y += post/
841endif
Simon Glass16a50682020-10-03 09:25:25 -0600842libs-$(CONFIG_UNIT_TEST) += test/
Joe Hershberger421f86f2015-05-20 14:27:36 -0500843libs-$(CONFIG_UT_ENV) += test/env/
Heiko Stuebner96383bd2019-10-23 16:46:41 +0200844libs-$(CONFIG_UT_OPTEE) += test/optee/
Maxime Ripardf2a99422016-07-05 10:26:46 +0200845libs-$(CONFIG_UT_OVERLAY) += test/overlay/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200846
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900847libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900848
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900849libs-y := $(sort $(libs-y))
850
851u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
852
853u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
854
855libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
856
857u-boot-init := $(head-y)
858u-boot-main := $(libs-y)
859
wdenka8c7c702003-12-06 19:49:23 +0000860
wdenk4f7cb082003-09-11 23:06:34 +0000861# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900862ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900863PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200864else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900865PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200866endif
867PLATFORM_LIBS += $(PLATFORM_LIBGCC)
Christian Gmeiner52ff8022018-04-09 17:11:45 +0200868
869ifdef CONFIG_CC_COVERAGE
870KBUILD_CFLAGS += --coverage
871PLATFORM_LIBGCC += -lgcov
872endif
873
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200874export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400875export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000876
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400877# Special flags for CPP when processing the linker script.
878# Pass the version down so we can handle backwards compatibility
879# on the fly.
880LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900881 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000882 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400883 $(shell $(LD) --version | \
884 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
885
wdenk7ebf7442002-11-02 23:17:16 +0000886#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000887#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000888
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400889ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200890BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400891else
892BOARD_SIZE_CHECK =
893endif
894
Ovidiu Panait2dfdd0c2020-09-25 21:12:56 +0300895ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
Simon Goldschmidt25770152019-05-24 22:07:04 +0200896SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +0200897else
898SPL_SIZE_CHECK =
899endif
900
Ovidiu Panait2dfdd0c2020-09-25 21:12:56 +0300901ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
Simon Glassc52b5e82019-10-20 21:31:52 -0600902TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
903else
904TPL_SIZE_CHECK =
905endif
906
Scott Wood8137af12013-12-14 11:47:32 +0800907# Statically apply RELA-style relocations (currently arm64 only)
Álvaro Fernández Rojasd57259b2017-04-20 20:36:25 +0200908# This is useful for arm64 where static relocation needs to be performed on
909# the raw binary, but certain simulators only accept an ELF file (but don't
910# do the relocation).
Scott Wood8137af12013-12-14 11:47:32 +0800911ifneq ($(CONFIG_STATIC_RELA),)
912# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
Jan Kiszka7125d2c2020-06-25 08:39:45 +0200913quiet_cmd_static_rela = RELOC $@
914cmd_static_rela = \
915 start=$$($(NM) $(2) | grep __rel_dyn_start | cut -f 1 -d ' '); \
916 end=$$($(NM) $(2) | grep __rel_dyn_end | cut -f 1 -d ' '); \
917 tools/relocate-rela $(3) $(4) $$start $$end
Scott Wood8137af12013-12-14 11:47:32 +0800918else
Jan Kiszka7125d2c2020-06-25 08:39:45 +0200919quiet_cmd_static_rela =
Pali Roháre9ebc172020-11-04 15:33:44 +0100920cmd_static_rela =
Scott Wood8137af12013-12-14 11:47:32 +0800921endif
922
Simon Glasse6385c72020-07-19 13:56:01 -0600923# Always append INPUTS so that arch config.mk's can add custom ones
924INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500925
Simon Glasse6385c72020-07-19 13:56:01 -0600926INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530927ifeq ($(CONFIG_SPL_FSL_PBL),y)
Simon Glasse6385c72020-07-19 13:56:01 -0600928INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530929else
Tom Rinibba4c7f2020-06-16 19:06:25 -0400930ifneq ($(CONFIG_NXP_ESBC), y)
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530931# For Secure Boot The Image needs to be signed and Header must also
932# be included. So The image has to be built explicitly
Simon Glasse6385c72020-07-19 13:56:01 -0600933INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530934endif
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530935endif
Simon Glasse6385c72020-07-19 13:56:01 -0600936INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
Stefano Babicd714a752019-09-20 08:47:53 +0200937ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600938INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100939else
Stefano Babicd714a752019-09-20 08:47:53 +0200940ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600941INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200942else
Simon Glasse6385c72020-07-19 13:56:01 -0600943INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100944endif
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200945endif
Simon Glasse6385c72020-07-19 13:56:01 -0600946INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
947INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb
Masahiro Yamada2405d092014-05-15 20:37:51 +0900948ifeq ($(CONFIG_SPL_FRAMEWORK),y)
Simon Glasse6385c72020-07-19 13:56:01 -0600949INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
Masahiro Yamada2405d092014-05-15 20:37:51 +0900950endif
Ilias Apalodimase7fb7892021-10-26 09:12:33 +0300951INPUTS-$(CONFIG_SANDBOX) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000952ifneq ($(CONFIG_SPL_TARGET),)
Simon Glasse6385c72020-07-19 13:56:01 -0600953INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000954endif
Simon Glasse6385c72020-07-19 13:56:01 -0600955INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
956INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
957INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
wdenk7ebf7442002-11-02 23:17:16 +0000958
Simon Glasse999bea2020-07-19 13:56:07 -0600959# Generate this input file for binman
960ifeq ($(CONFIG_SPL),)
Simon Glasse6385c72020-07-19 13:56:01 -0600961INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
Simon Glasse999bea2020-07-19 13:56:07 -0600962endif
Ryder Lee3b975a12018-11-15 10:07:49 +0800963
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200964# Add optional build target if defined in board/cpu/soc headers
965ifneq ($(CONFIG_BUILD_TARGET),)
Simon Glasse6385c72020-07-19 13:56:01 -0600966INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200967endif
968
AKASHI Takahirodde1b752020-03-10 09:20:43 +0900969ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600970INPUTS-y += init_sp_bss_offset_check
Stephen Warren5fed97a2018-01-09 12:52:14 -0700971endif
972
Jagdish Gediya96699f02018-09-03 21:35:10 +0530973ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600974INPUTS-y += u-boot-with-dtb.bin
Jagdish Gediya96699f02018-09-03 21:35:10 +0530975endif
976
Simon Glasse999bea2020-07-19 13:56:07 -0600977ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
978# On ARM64 this target is produced by binman so we don't need this dep
979ifeq ($(CONFIG_ARM64),y)
980ifeq ($(CONFIG_SPL),y)
981# TODO: Get binman to generate this too
Simon Glasse6385c72020-07-19 13:56:01 -0600982INPUTS-y += u-boot-rockchip.bin
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +0300983endif
Simon Glasse999bea2020-07-19 13:56:07 -0600984else
985ifeq ($(CONFIG_SPL),y)
986# Generate these inputs for binman which will create the output files
987INPUTS-y += idbloader.img u-boot.img
988endif
989endif
990endif
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +0300991
Simon Glass42b18df2020-07-19 13:56:03 -0600992INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
993 $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
994 $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
995
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900996LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Joel Stanleye391b1e2017-04-09 20:33:58 +0200997
998# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
999LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
1000
Alistair Delva58772282021-10-20 21:31:33 +00001001# ld.lld support
1002LDFLAGS_u-boot += -z notext
1003
Marek Behúnda48bd92021-05-20 13:24:04 +02001004LDFLAGS_u-boot += --build-id=none
1005
Alexey Brodkin10228072018-02-21 13:06:26 +03001006ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001007LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
1008endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +09001009
Tom Rini5972ff02020-03-11 18:11:17 -04001010# insure the checker run with the right endianness
1011CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
1012
1013# the checker needs the correct machine size
1014CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
1015
Simon Glasse020c882015-07-31 09:31:23 -06001016# Normally we fill empty space with 0xff
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001017quiet_cmd_objcopy = OBJCOPY $@
Simon Glasse020c882015-07-31 09:31:23 -06001018cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
1019 $(OBJCOPYFLAGS_$(@F)) $< $@
1020
1021# Provide a version which does not do this, for use by EFI
1022quiet_cmd_zobjcopy = OBJCOPY $@
1023cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001024
Simon Glass476476e2015-08-04 12:33:52 -06001025quiet_cmd_efipayload = OBJCOPY $@
1026cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
1027
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +01001028MKIMAGEOUTPUT ?= /dev/null
1029
Marek Vasutb97241b2014-03-14 05:00:14 +01001030quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001031cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
Rasmus Villemoes06587612018-03-23 12:08:02 +01001032 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001033
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001034quiet_cmd_mkfitimage = MKIMAGE $@
Simon Glass18e08132020-07-19 13:56:09 -06001035cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
1036 -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
Rasmus Villemoes06587612018-03-23 12:08:02 +01001037 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001038
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001039quiet_cmd_cat = CAT $@
1040cmd_cat = cat $(filter-out $(PHONY), $^) > $@
1041
Masahiro Yamada982a1192014-02-24 11:12:17 +09001042append = cat $(filter-out $< $(PHONY), $^) >> $@
1043
1044quiet_cmd_pad_cat = CAT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001045cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
Masahiro Yamada982a1192014-02-24 11:12:17 +09001046
Weijie Gaoa38f84b2020-04-21 09:28:39 +02001047quiet_cmd_lzma = LZMA $@
1048cmd_lzma = lzma -c -z -k -9 $< > $@
1049
Simon Glass1bd87632016-11-13 14:25:50 -07001050cfg: u-boot.cfg
1051
Masahiro Yamada1bdd9422017-01-31 20:11:33 +09001052quiet_cmd_cfgcheck = CFGCHK $2
1053cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
1054 $(srctree)/scripts/config_whitelist.txt $(srctree)
1055
Simon Glass13732522021-03-25 21:24:33 +13001056# Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
1057got = $(foreach cfg,$(1),$($(cfg)))
1058
1059# expected value 'y for each one
1060expect = $(foreach cfg,$(1),y)
1061
1062# Show a deprecation message
1063# Args:
1064# 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
1065# 2: Name of component (e.g . "Ethernet drivers")
1066# 3: Release deadline (e.g. "v202.07")
1067# 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
1068# Note: Script avoids bash construct, hence the strange double 'if'
1069# (patches welcome!)
1070define deprecated
Simon Glassa0da06d2021-04-01 11:18:13 +13001071 @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
Simon Glass13732522021-03-25 21:24:33 +13001072 echo >&2 "===================== WARNING ======================"; \
1073 echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
1074 echo >&2 "for $(2)). Please update the board to use"; \
1075 echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
1076 echo >&2 "update by the deadline may result in board removal."; \
1077 echo >&2 "See doc/driver-model/migration.rst for more info."; \
1078 echo >&2 "===================================================="; \
1079 fi; fi
1080
1081endef
1082
Simon Glasse6385c72020-07-19 13:56:01 -06001083PHONY += inputs
1084inputs: $(INPUTS-y)
1085
Simon Glass42b18df2020-07-19 13:56:03 -06001086all: .binman_stamp inputs
1087ifeq ($(CONFIG_BINMAN),y)
1088 $(call if_changed,binman)
1089endif
1090
1091# Timestamp file to make sure that binman always runs
1092.binman_stamp: FORCE
1093 @touch $@
Simon Glasse6385c72020-07-19 13:56:01 -06001094
Jagan Teki63235bd2019-05-29 17:01:30 -04001095ifeq ($(CONFIG_DEPRECATED),y)
1096 $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
1097endif
Simon Glass26e24d62021-11-03 21:09:05 -06001098ifeq ($(CONFIG_OF_EMBED)$(CONFIG_EFI_APP),y)
Simon Glass06467e42021-03-25 21:24:32 +13001099 @echo >&2 "===================== WARNING ======================"
1100 @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
1101 @echo >&2 "be used for debugging purposes. Please use"
1102 @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
1103 @echo >&2 "See doc/README.fdt-control for more info."
1104 @echo >&2 "===================================================="
1105endif
1106ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
1107 @echo >&2 "===================== WARNING ======================"
1108 @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
1109 @echo >&2 "to binman instead, to avoid the proliferation of"
1110 @echo >&2 "arch-specific scripts with no tests."
1111 @echo >&2 "===================================================="
1112endif
Heinrich Schuchardt282ed242019-09-16 18:41:42 +02001113ifneq ($(CONFIG_DM),y)
1114 @echo >&2 "===================== WARNING ======================"
1115 @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
1116 @echo >&2 "compulsory starting with the v2020.01 release."
1117 @echo >&2 "Failure to update may result in board removal."
1118 @echo >&2 "See doc/driver-model/migration.rst for more info."
1119 @echo >&2 "===================================================="
1120endif
Simon Glass78b4a562021-03-25 21:24:41 +13001121 $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
1122 $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
Simon Glass8cd18742021-03-25 21:24:42 +13001123 $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
Simon Glass19c969b2021-07-10 21:14:33 -06001124 $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
Simon Glass6ce22372021-11-24 09:26:45 -07001125 $(call deprecated,CONFIG_DM_KEYBOARD,Keyboard drivers,v2022.10,$(CONFIG_KEYBOARD))
Masahiro Yamada4bf06d12016-09-26 13:04:59 +09001126 @# Check that this build does not use CONFIG options that we do not
1127 @# know about unless they are in Kconfig. All the existing CONFIG
1128 @# options are whitelisted, so new ones should not be added.
Masahiro Yamada1bdd9422017-01-31 20:11:33 +09001129 $(call cmd,cfgcheck,u-boot.cfg)
wdenk7ebf7442002-11-02 23:17:16 +00001130
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001131PHONY += dtbs
Masahiro Yamada4141e852016-06-23 13:53:46 +09001132dtbs: dts/dt.dtb
1133 @:
Tom Rini36dd5f12017-09-23 13:00:57 -04001134dts/dt.dtb: u-boot
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001135 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +00001136
Simon Glassad1ecd22016-01-31 18:10:50 -07001137quiet_cmd_copy = COPY $@
1138 cmd_copy = cp $< $@
1139
Jean-Jacques Hiblot11955592017-09-15 12:57:24 +02001140ifeq ($(CONFIG_MULTI_DTB_FIT),y)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001141
Marek Vasut95f4bbd2019-03-08 16:06:55 +01001142ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
1143FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
1144else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
1145FINAL_DTB_CONTAINER = fit-dtb.blob.gz
1146else
1147FINAL_DTB_CONTAINER = fit-dtb.blob
1148endif
1149
1150fit-dtb.blob.gz: fit-dtb.blob
1151 @gzip -kf9 $< > $@
1152
1153fit-dtb.blob.lzo: fit-dtb.blob
1154 @lzop -f9 $< > $@
1155
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001156fit-dtb.blob: dts/dt.dtb FORCE
1157 $(call if_changed,mkimage)
Vagrant Cascadian878e2a52019-05-02 11:14:12 -07001158ifneq ($(SOURCE_DATE_EPOCH),)
1159 touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
1160 chmod 0600 fit-dtb.blob
1161endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001162
1163MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1164 -a 0 -e 0 -E \
1165 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
1166
Michal Simek570c4632021-08-19 11:09:37 +02001167MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
1168
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301169ifneq ($(EXT_DTB),)
1170u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
1171 $(call if_changed,cat)
1172else
Tom Rini748198c2019-05-19 18:09:05 -04001173u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001174 $(call if_changed,cat)
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301175endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001176
1177u-boot.bin: u-boot-fit-dtb.bin FORCE
1178 $(call if_changed,copy)
Heiko Schocher16c776d2019-05-28 13:44:31 +02001179
1180u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
1181 $(call if_changed,cat)
1182
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001183else ifeq ($(CONFIG_OF_SEPARATE),y)
Simon Glassad1ecd22016-01-31 18:10:50 -07001184u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001185 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +00001186
Simon Glassad1ecd22016-01-31 18:10:50 -07001187u-boot.bin: u-boot-dtb.bin FORCE
1188 $(call if_changed,copy)
1189else
1190u-boot.bin: u-boot-nodtb.bin FORCE
1191 $(call if_changed,copy)
1192endif
1193
Heiko Schocher0f282c12019-10-25 14:46:54 +02001194# we call Makefile in arch/arm/mach-imx which
1195# has targets which are dependent on targets defined
1196# here. make could not resolve them and we must ensure
1197# that they are finished before calling imx targets
1198ifeq ($(CONFIG_MULTI_DTB_FIT),y)
1199IMX_DEPS = u-boot-fit-dtb.bin
1200endif
1201
1202%.imx: $(IMX_DEPS) %.bin
Stefano Babic552a8482017-06-29 10:16:06 +02001203 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Heinrich Schuchardt219dee72019-04-02 19:19:05 +02001204 $(BOARD_SIZE_CHECK)
Stefano Babice64348f2014-03-31 09:50:35 +02001205
Albert ARIBAUD \(3ADEV\)ed0c2c02016-09-26 09:08:06 +02001206%.vyb: %.imx
1207 $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
1208
1209quiet_cmd_copy = COPY $@
1210 cmd_copy = cp $< $@
1211
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +09001212u-boot.dtb: dts/dt.dtb
1213 $(call cmd,copy)
1214
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001215OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +00001216
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001217OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +00001218
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001219u-boot.hex u-boot.srec: u-boot FORCE
1220 $(call if_changed,objcopy)
1221
Masaru Nagai341ca902015-08-28 12:12:45 +09001222OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
1223
1224u-boot-elf.srec: u-boot.elf FORCE
1225 $(call if_changed,objcopy)
1226
Marek Vasut3ee58ea2018-02-26 20:14:02 +01001227OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
1228
1229spl/u-boot-spl.srec: spl/u-boot-spl FORCE
1230 $(call if_changed,objcopy)
1231
Marek Vasut56023302018-10-03 12:44:13 +02001232%.scif: %.srec
1233 $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
1234
Simon Glassad1ecd22016-01-31 18:10:50 -07001235OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
Jagdish Gediya96699f02018-09-03 21:35:10 +05301236 $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
1237 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001238
Simon Glassad1ecd22016-01-31 18:10:50 -07001239binary_size_check: u-boot-nodtb.bin FORCE
1240 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001241 map_size=$(shell cat u-boot.map | \
Simon Glass0b308f12014-06-18 00:10:15 -06001242 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001243 | sed 's/0X//g' \
Simon Glass0b308f12014-06-18 00:10:15 -06001244 | bc); \
Simon Glass89742922014-06-02 22:04:47 -06001245 if [ "" != "$$map_size" ]; then \
1246 if test $$map_size -ne $$file_size; then \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001247 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
Simon Glassad1ecd22016-01-31 18:10:50 -07001248 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
Simon Glass89742922014-06-02 22:04:47 -06001249 exit 1; \
Angelo Dureghello51301022021-11-05 16:20:24 +01001250 fi; \
Simon Glass89742922014-06-02 22:04:47 -06001251 fi
1252
AKASHI Takahirodde1b752020-03-10 09:20:43 +09001253ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
Stephen Warren5fed97a2018-01-09 12:52:14 -07001254ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
1255subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
1256else
1257subtract_sys_malloc_f_len = true
1258endif
1259# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
1260# so low that the DTB could probably use 90%+ of the available space, for
1261# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
1262# safe for now and tweak this later if space becomes tight.
1263# A rejected alternative would be to check that some absolute minimum stack
1264# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
1265# deliberately build-specific, to take account of build-to-build stack usage
1266# differences due to different feature sets, there is no common absolute value
1267# to check against.
1268init_sp_bss_offset_check: u-boot.dtb FORCE
1269 @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
1270 space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
1271 $(subtract_sys_malloc_f_len) ; \
1272 quarter_space=$$(($${space} / 4)) ; \
1273 if [ $${dtb_size} -gt $${quarter_space} ]; then \
1274 echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
1275 echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
1276 exit 1 ; \
1277 fi
1278endif
1279
Pali Rohár71d3fa72020-11-04 10:34:35 +01001280shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
Pali Rohárae897022020-10-07 15:39:40 +02001281
1282quiet_cmd_objcopy_uboot = OBJCOPY $@
Pali Roháre9ebc172020-11-04 15:33:44 +01001283ifdef cmd_static_rela
Pali Rohár4532bf42020-10-26 14:10:49 +01001284cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
Pali Roháre9ebc172020-11-04 15:33:44 +01001285else
1286cmd_objcopy_uboot = $(cmd_objcopy)
1287endif
Pali Rohárae897022020-10-07 15:39:40 +02001288
Simon Glassad1ecd22016-01-31 18:10:50 -07001289u-boot-nodtb.bin: u-boot FORCE
Pali Rohárae897022020-10-07 15:39:40 +02001290 $(call if_changed,objcopy_uboot)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001291 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +00001292
Masahiro Yamada9e414032014-02-04 17:24:24 +09001293u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -04001294 $(CREATE_LDR_ENV)
Sonic Zhang240182d2014-08-12 18:45:26 +08001295 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -04001296 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001297
Simon Glass17a944b2016-11-25 20:15:57 -07001298# binman
1299# ---------------------------------------------------------------------------
Simon Glassa3c00552018-11-06 15:21:31 -07001300# Use 'make BINMAN_DEBUG=1' to enable debugging
Simon Glassef108042021-02-06 09:57:28 -07001301# Use 'make BINMAN_VERBOSE=3' to set vebosity level
Simon Glassc0f1ebe2020-09-06 10:39:08 -06001302default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
Simon Glasscfee2b22021-03-18 20:25:08 +13001303
Simon Glass17a944b2016-11-25 20:15:57 -07001304quiet_cmd_binman = BINMAN $@
Stephen Warren4f4fb852019-07-19 11:21:17 -06001305cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
Simon Glass79450772021-11-23 21:09:48 -07001306 $(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \
Simon Glass8fce3f22019-09-25 08:11:10 -06001307 --toolpath $(objtree)/tools \
Simon Glass1f338e02019-09-25 08:11:11 -06001308 $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
Simon Glassbd4d0dc2020-09-01 05:14:00 -06001309 build -u -d u-boot.dtb -O . -m --allow-missing \
Simon Glassa3c00552018-11-06 15:21:31 -07001310 -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
Simon Glasscfa3db62020-09-01 05:14:01 -06001311 -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
Simon Glass79450772021-11-23 21:09:48 -07001312 $(foreach f,$(BINMAN_INDIRS),-I $(f)) \
Simon Glasscfa3db62020-09-01 05:14:01 -06001313 -a atf-bl31-path=${BL31} \
Bin Meng73c2a8f2021-05-10 20:23:34 +08001314 -a opensbi-path=${OPENSBI} \
Simon Glassc0f1ebe2020-09-06 10:39:08 -06001315 -a default-dt=$(default_dt) \
Samuel Holland18bd4552020-10-21 21:12:15 -05001316 -a scp-path=$(SCP) \
Simon Glasscfee2b22021-03-18 20:25:08 +13001317 -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
1318 -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
Simon Glassf99cbe42021-08-07 07:24:07 -06001319 -a spl-dtb=$(CONFIG_SPL_OF_REAL) \
Simon Glassebee2062021-10-31 19:17:03 -06001320 -a tpl-dtb=$(CONFIG_TPL_OF_REAL) \
Stephen Warren4f4fb852019-07-19 11:21:17 -06001321 $(BINMAN_$(@F))
Simon Glass17a944b2016-11-25 20:15:57 -07001322
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001323OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -05001324
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001325OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
1326
1327u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
1328 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001329
Stefan Roeseb40bda62012-08-16 17:54:52 +02001330#
1331# U-Boot entry point, needed for booting of full-blown U-Boot
1332# from the SPL U-Boot version.
1333#
1334ifndef CONFIG_SYS_UBOOT_START
Patrice Chotard38a6cce2019-12-06 15:01:48 +01001335CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
Stefan Roeseb40bda62012-08-16 17:54:52 +02001336endif
1337
Michal Simekfc8db752019-10-02 15:53:12 +02001338# Boards with more complex image requirements can provide an .its source file
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001339# or a generator script
Simon Glassf4a43d22020-07-19 13:56:11 -06001340# NOTE: Please do not use this. We are migrating away from Makefile rules to use
1341# binman instead.
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001342ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
Patrick Delaunay0015e6d2020-04-23 09:39:08 +02001343U_BOOT_ITS := u-boot.its
1344$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
1345 $(call if_changed,copy)
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001346else
Simon Glassa8f3ace2020-07-19 13:56:10 -06001347ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001348U_BOOT_ITS := u-boot.its
Andreas Färberc29c1e62018-06-03 07:23:58 +02001349ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
1350U_BOOT_ITS_DEPS += u-boot
1351endif
1352$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001353 $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
1354 $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
1355endif
1356endif
1357
Simon Glasscdf17242016-02-22 22:55:57 -07001358ifdef CONFIG_SPL_LOAD_FIT
1359MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1360 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
Sjoerd Simons80cc9512019-06-18 22:13:20 +02001361 -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
Simon Glasscdf17242016-02-22 22:55:57 -07001362 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
Klaus Heinrich Kiwi4e040b42021-02-09 15:41:55 -03001363 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
Jean-Jacques Hiblot557bc972019-10-22 16:39:21 +02001364 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
1365 $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
Simon Glasscdf17242016-02-22 22:55:57 -07001366else
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001367MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
1368 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1369 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001370MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
1371 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1372 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +01001373u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
Simon Glasscdf17242016-02-22 22:55:57 -07001374endif
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001375
Simon Glassdae6e7b2016-01-31 18:10:54 -07001376MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
1377
Bin Meng6cdd1772019-10-28 07:25:01 -07001378# Some boards have the kwbimage.cfg file written in advance, while some
1379# other boards generate it on the fly during the build in the build tree.
1380# Let's check if the file exists in the build tree first, otherwise we
1381# fall back to use the one in the source tree.
1382KWD_CONFIG_FILE = $(shell \
1383 if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
1384 echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
1385 else \
1386 echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
1387 fi)
1388
1389MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
Masahiro Yamada4ab3fc52014-03-11 11:05:17 +09001390 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001391
Bin Meng6cdd1772019-10-28 07:25:01 -07001392MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
Pali Rohár628fced2021-07-23 11:14:30 +02001393 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
Mario Sixa1b6b0a2017-01-11 16:01:00 +01001394 $(if $(KEYDIR),-k $(KEYDIR))
Stefan Roesea90ffb52015-01-19 11:33:45 +01001395
Masahiro Yamadae4536f82014-03-11 11:05:16 +09001396MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1397 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001398
Hou Zhiqiangbcda5b02019-08-20 09:35:23 +00001399ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1400UBOOT_BIN := u-boot-with-dtb.bin
1401else
1402UBOOT_BIN := u-boot.bin
1403endif
1404
Weijie Gaoa38f84b2020-04-21 09:28:39 +02001405MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
1406 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1407 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1408
1409u-boot.bin.lzma: u-boot.bin FORCE
1410 $(call if_changed,lzma)
1411
1412u-boot-lzma.img: u-boot.bin.lzma FORCE
1413 $(call if_changed,mkimage)
1414
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001415u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
Lukas Auer2c768612019-08-21 21:14:41 +02001416 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
Simon Glass8e076812021-12-16 20:59:22 -07001417 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
Tom Rinie4b8dd92019-08-27 07:11:37 -04001418 ,$(UBOOT_BIN)) FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001419 $(call if_changed,mkimage)
Simon Goldschmidt45297e22019-01-11 20:56:02 +01001420 $(BOARD_SIZE_CHECK)
wdenkbdccc4f2003-08-05 17:43:17 +00001421
Marek Vasut7a778362019-03-06 22:04:00 +01001422ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
1423MKIMAGEFLAGS_u-boot.itb =
1424else
1425MKIMAGEFLAGS_u-boot.itb = -E
1426endif
Michal Simek570c4632021-08-19 11:09:37 +02001427MKIMAGEFLAGS_u-boot.itb += -B 0x8
Marek Vasut7a778362019-03-06 22:04:00 +01001428
Samuel Holland509978e2020-10-21 21:12:08 -05001429ifdef U_BOOT_ITS
Lukas Auer2c768612019-08-21 21:14:41 +02001430u-boot.itb: u-boot-nodtb.bin \
Ilias Apalodimase7fb7892021-10-26 09:12:33 +03001431 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
Lukas Auer2c768612019-08-21 21:14:41 +02001432 $(U_BOOT_ITS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001433 $(call if_changed,mkfitimage)
Maxime Riparde89f5591f2018-01-16 09:44:23 +01001434 $(BOARD_SIZE_CHECK)
Samuel Holland509978e2020-10-21 21:12:08 -05001435endif
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001436
Pali Rohár628fced2021-07-23 11:14:30 +02001437u-boot-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
Stefan Roesea90ffb52015-01-19 11:33:45 +01001438 $(call if_changed,mkimage)
1439
Masahiro Yamada9e414032014-02-04 17:24:24 +09001440u-boot.sha1: u-boot.bin
1441 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +02001442
Masahiro Yamada9e414032014-02-04 17:24:24 +09001443u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +00001444 $(OBJDUMP) -d $< > $@
1445
York Sun7550dbe2018-06-14 14:38:48 -07001446ifneq ($(CONFIG_SPL_PAYLOAD),)
1447SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001448else
Masahiro Yamada9e414032014-02-04 17:24:24 +09001449SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +08001450endif
Scott Wood74752ba2012-12-06 13:33:16 +00001451
Stefan Roese9ea6f712019-04-03 15:24:50 +02001452SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
1453
Masahiro Yamada982a1192014-02-24 11:12:17 +09001454OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
1455 --pad-to=$(CONFIG_SPL_PAD_TO)
Stefan Roese9ea6f712019-04-03 15:24:50 +02001456u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
Masahiro Yamada982a1192014-02-24 11:12:17 +09001457 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001458
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001459ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
Jagan Tekib1022d52020-01-10 00:16:16 +05301460
Jagan Teki66ffe312020-01-10 00:16:18 +05301461# TPL + SPL
1462ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
Jagan Tekif6f9aff2020-06-04 20:21:38 +05301463MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
Jagan Teki3029a7b2020-01-10 00:16:17 +05301464tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001465 $(call if_changed,mkimage)
Jagan Teki3029a7b2020-01-10 00:16:17 +05301466idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001467 $(call if_changed,cat)
Jagan Teki66ffe312020-01-10 00:16:18 +05301468else
Jagan Tekif6f9aff2020-06-04 20:21:38 +05301469MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
Jagan Teki66ffe312020-01-10 00:16:18 +05301470idbloader.img: spl/u-boot-spl.bin FORCE
1471 $(call if_changed,mkimage)
1472endif
1473
Simon Glasse999bea2020-07-19 13:56:07 -06001474ifeq ($(CONFIG_ARM64),y)
Jagan Teki79030a42020-01-10 00:16:21 +05301475OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
1476 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
1477u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
1478 $(call if_changed,pad_cat)
1479endif # CONFIG_ARM64
1480
1481endif # CONFIG_ARCH_ROCKCHIP
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001482
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001483ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001484MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
1485
1486lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
1487 $(call if_changed,mkimage)
1488
1489OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1490
Masahiro Yamada514ec432016-02-05 17:55:13 +09001491lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001492 $(call if_changed,objcopy)
1493
1494OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1495
Masahiro Yamada514ec432016-02-05 17:55:13 +09001496lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001497 $(call if_changed,objcopy)
1498
Masahiro Yamada514ec432016-02-05 17:55:13 +09001499lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001500 $(call if_changed,cat)
1501
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001502endif
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001503
Masahiro Yamada982a1192014-02-24 11:12:17 +09001504OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
1505 --pad-to=$(CONFIG_TPL_PAD_TO)
1506tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
1507 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +00001508
Masahiro Yamada630d2342014-02-24 11:12:21 +09001509SPL: spl/u-boot-spl.bin FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001510 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Masahiro Yamada630d2342014-02-24 11:12:21 +09001511
Peng Fancaceb732018-12-21 06:21:31 +00001512ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
Peng Fan700315c2019-08-22 07:42:41 +00001513ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
1514u-boot.cnt: u-boot.bin FORCE
1515 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1516
1517flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
1518 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1519else
Marek Vasutbd9059c2021-02-25 21:50:59 +01001520ifeq ($(CONFIG_BINMAN),y)
1521flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
1522 $(call if_changed,binman)
1523 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1524else
Peng Fan94df9882018-11-20 10:19:46 +00001525flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
1526 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1527endif
Peng Fan700315c2019-08-22 07:42:41 +00001528endif
Marek Vasutbd9059c2021-02-25 21:50:59 +01001529endif
Peng Fan94df9882018-11-20 10:19:46 +00001530
Marek Vasut70344782021-03-01 16:41:28 +01001531u-boot.uim: u-boot.bin FORCE
1532 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1533
1534u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001535 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +00001536
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001537MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
1538
1539u-boot.ubl: u-boot-with-spl.bin FORCE
1540 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +00001541
Masahiro Yamada982a1192014-02-24 11:12:17 +09001542MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
1543 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
1544 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1545spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1546 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +00001547
Christian Riesch532d5312014-05-07 10:16:28 +02001548OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +09001549u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1550 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +00001551
Marek Vasut1a9df132014-04-03 19:12:21 +02001552u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1553 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +09001554u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +09001555 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +00001556
Masahiro Yamada982a1192014-02-24 11:12:17 +09001557MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1558 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1559spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1560 $(call if_changed,mkimage)
1561
Marek Vasut333b7202015-07-15 02:53:45 +02001562ifneq ($(CONFIG_ARCH_SOCFPGA),)
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001563quiet_cmd_gensplx4 = GENSPLX4 $@
Ley Foon Tan40551cf2021-01-13 18:53:05 +08001564cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
1565 --pad-to=$(CONFIG_SPL_PAD_TO) \
1566 spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
1567 cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
Pali Rohár4532bf42020-10-26 14:10:49 +01001568 spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001569spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
1570 $(call if_changed,gensplx4)
1571
Marek Vasut333b7202015-07-15 02:53:45 +02001572quiet_cmd_socboot = SOCBOOT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001573cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001574u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
Marek Vasut333b7202015-07-15 02:53:45 +02001575 $(call if_changed,socboot)
Marek Vasut533832c2019-11-20 22:36:45 +01001576
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001577quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
1578cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
Marek Vasut533832c2019-11-20 22:36:45 +01001579 cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
1580 spl/u-boot-spl.sfp spl/u-boot-spl.pad \
1581 spl/u-boot-spl.sfp spl/u-boot-spl.pad \
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001582 spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
Pali Rohár4532bf42020-10-26 14:10:49 +01001583 { rm -f $@ spl/u-boot-spl.pad; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001584u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
1585 $(call if_changed,gensplpadx4)
1586
1587quiet_cmd_socnandboot = SOCNANDBOOT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001588cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001589u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
Marek Vasut533832c2019-11-20 22:36:45 +01001590 $(call if_changed,socnandboot)
1591
Marek Vasut333b7202015-07-15 02:53:45 +02001592endif
1593
Jagdish Gediya96699f02018-09-03 21:35:10 +05301594ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1595u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
1596 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
1597 $(call if_changed,binman)
1598
1599ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
1600OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
1601u-boot-br.bin: u-boot FORCE
1602 $(call if_changed,objcopy)
1603endif
1604endif
1605
Simon Glass0adf8d32016-03-11 22:07:16 -07001606quiet_cmd_ldr = LD $@
1607cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1608 $(filter-out FORCE,$^) -o $@
1609
Simon Glassbcd4e6f2020-07-19 13:55:52 -06001610ifdef CONFIG_X86
Simon Glass5e239182019-08-24 07:22:49 -06001611OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
1612u-boot-x86-start16.bin: u-boot FORCE
1613 $(call if_changed,objcopy)
1614
1615OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
1616u-boot-x86-reset16.bin: u-boot FORCE
Simon Glassfce7b272014-11-12 22:42:08 -07001617 $(call if_changed,objcopy)
Simon Glassaafe5c52020-07-19 13:55:54 -06001618
Simon Glass42b18df2020-07-19 13:56:03 -06001619endif # CONFIG_X86
Simon Glassbcd4e6f2020-07-19 13:55:52 -06001620
Simon Glass08aeb8b2015-08-04 12:33:43 -06001621OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1622u-boot-app.efi: u-boot FORCE
1623 $(call if_changed,zobjcopy)
1624
Simon Glass73c5c392016-01-31 18:10:55 -07001625u-boot.bin.o: u-boot.bin FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001626 $(call if_changed,efipayload)
1627
1628u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1629 $(call if_changed_dep,cpp_lds)
1630
1631# Rule to link the EFI payload which contains a stub and a U-Boot binary
1632quiet_cmd_u-boot_payload ?= LD $@
1633 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
Simon Glass96a8d402015-08-04 12:33:56 -06001634 -T u-boot-payload.lds arch/x86/cpu/call32.o \
Simon Glass73c5c392016-01-31 18:10:55 -07001635 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
Simon Glass2dcd4e92016-11-07 08:47:14 -07001636 $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
Simon Glass476476e2015-08-04 12:33:52 -06001637
Simon Glass73c5c392016-01-31 18:10:55 -07001638u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001639 $(call if_changed,u-boot_payload)
1640
1641OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1642u-boot-payload.efi: u-boot-payload FORCE
1643 $(call if_changed,zobjcopy)
1644
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001645u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1646 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +02001647
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301648#Add a target to create boot binary having SPL binary in PBI format
1649#concatenated with u-boot binary. It is need by PowerPC SoC having
1650#internal SRAM <= 512KB.
1651MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Alison Wang94cb17d2014-12-03 15:00:41 +08001652 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1653 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301654
1655spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1656 $(call if_changed,mkimage)
1657
Alison Wang45c2e482014-12-03 15:00:42 +08001658ifeq ($(ARCH),arm)
1659UBOOT_BINLOAD := u-boot.img
1660else
Jagdish Gediya96699f02018-09-03 21:35:10 +05301661ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1662UBOOT_BINLOAD := u-boot-with-dtb.bin
1663else
Alison Wang45c2e482014-12-03 15:00:42 +08001664UBOOT_BINLOAD := u-boot.bin
1665endif
Jagdish Gediya96699f02018-09-03 21:35:10 +05301666endif
Alison Wang45c2e482014-12-03 15:00:42 +08001667
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301668OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1669 --gap-fill=0xff
1670
Alison Wang45c2e482014-12-03 15:00:42 +08001671u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301672 $(call if_changed,pad_cat)
1673
Stefan Roeseecddccd2013-02-22 11:36:50 +01001674# PPC4xx needs the SPL at the end of the image, since the reset vector
1675# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1676# and need to introduce a new build target with the full blown U-Boot
1677# at the start padded up to the start of the SPL image. And then concat
1678# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +09001679
1680OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1681 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1682u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1683 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +01001684
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001685quiet_cmd_u-boot-elf ?= LD $@
1686 cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
Michal Simeke14ba8a2020-03-30 13:58:59 +02001687 -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001688 -Ttext=$(CONFIG_SYS_TEXT_BASE)
Michal Simeke14ba8a2020-03-30 13:58:59 +02001689u-boot.elf: u-boot.bin u-boot-elf.lds
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001690 $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
1691 $(call if_changed,u-boot-elf)
Scott Woodf4dc7142013-12-14 11:47:33 +08001692
Michal Simeke14ba8a2020-03-30 13:58:59 +02001693u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
1694 $(call if_changed_dep,cpp_lds)
1695
Ryder Lee3b975a12018-11-15 10:07:49 +08001696# MediaTek's ARM-based u-boot needs a header to contains its load address
1697# which is parsed by the BootROM.
1698# If the SPL build is enabled, the header will be added to the spl binary,
1699# and the spl binary and the u-boot.img will be combined into one file.
1700# Otherwise the header will be added to the u-boot.bin directly.
1701
1702ifeq ($(CONFIG_SPL),y)
1703spl/u-boot-spl-mtk.bin: spl/u-boot-spl
Weijie Gaof4f478b2021-03-05 10:39:55 +08001704
1705u-boot-mtk.bin: u-boot-with-spl.bin
1706 $(call if_changed,copy)
Ryder Lee3b975a12018-11-15 10:07:49 +08001707else
1708MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
1709 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1710 -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
1711
1712u-boot-mtk.bin: u-boot.bin FORCE
1713 $(call if_changed,mkimage)
1714endif
1715
Daniel Schwierzeckb8cecd02020-06-06 22:21:47 +02001716quiet_cmd_endian_swap = SWAP $@
1717 cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
1718
1719u-boot-swap.bin: u-boot.bin FORCE
1720 $(call if_changed,endian_swap)
1721
Paul Burton09bebb82017-06-15 17:05:09 -07001722ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
1723
Marek Behúnc1094982021-05-20 13:24:03 +02001724# Generate linker list symbols references to force compiler to not optimize
1725# them away when compiling with LTO
1726ifdef CONFIG_LTO
1727u-boot-keep-syms-lto := keep-syms-lto.o
1728u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
1729
1730quiet_cmd_keep_syms_lto = KSL $@
1731 cmd_keep_syms_lto = \
Patrick Delaunayff7852d2021-07-21 09:56:07 +02001732 $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
Marek Behúnc1094982021-05-20 13:24:03 +02001733
1734quiet_cmd_keep_syms_lto_cc = KSLCC $@
1735 cmd_keep_syms_lto_cc = \
1736 $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
1737
1738$(u-boot-keep-syms-lto_c): $(u-boot-main)
1739 $(call if_changed,keep_syms_lto)
1740$(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
1741 $(call if_changed,keep_syms_lto_cc)
1742else
1743u-boot-keep-syms-lto :=
1744endif
1745
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001746# Rule to link u-boot
1747# May be overridden by arch/$(ARCH)/config.mk
Marek Behúnc1094982021-05-20 13:24:03 +02001748ifdef CONFIG_LTO
1749quiet_cmd_u-boot__ ?= LTO $@
Wolfgang Denk0cf207e2021-09-27 17:42:39 +02001750 cmd_u-boot__ ?= \
Marek Behúnc1094982021-05-20 13:24:03 +02001751 $(CC) -nostdlib -nostartfiles \
1752 $(LTO_FINAL_LDFLAGS) $(c_flags) \
1753 $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
1754 -T u-boot.lds $(u-boot-init) \
1755 -Wl,--whole-archive \
1756 $(u-boot-main) \
1757 $(u-boot-keep-syms-lto) \
1758 $(PLATFORM_LIBS) \
1759 -Wl,--no-whole-archive \
1760 -Wl,-Map,u-boot.map; \
1761 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
1762else
Simon Glasse16c47f2021-11-03 21:09:07 -06001763# Note: Linking efi-x86_app64 causes a segfault in the linker at present
1764# when using x86_64-linux-gnu-ld.bfd
1765# For now, disable --whole-archive which makes things link, although not
1766# correctly
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001767quiet_cmd_u-boot__ ?= LD $@
Marek Behún14458362021-05-20 13:24:01 +02001768 cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1769 -T u-boot.lds $(u-boot-init) \
Simon Glasse16c47f2021-11-03 21:09:07 -06001770 $(if $(CONFIG_EFI_APP_64BIT),,--whole-archive) \
Marek Behún14458362021-05-20 13:24:01 +02001771 $(u-boot-main) \
Simon Glasse16c47f2021-11-03 21:09:07 -06001772 $(if $(CONFIG_EFI_APP_64BIT),,--no-whole-archive) \
Marek Behún14458362021-05-20 13:24:01 +02001773 $(PLATFORM_LIBS) -Map u-boot.map; \
1774 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
Marek Behúnc1094982021-05-20 13:24:03 +02001775endif
Simon Glass86eb49b2011-10-03 19:26:50 +00001776
Vasili Galkacac8f382014-08-14 12:40:55 +03001777quiet_cmd_smap = GEN common/system_map.o
1778cmd_smap = \
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001779 smap=`$(call SYSTEM_MAP,u-boot) | \
1780 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1781 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1782 -c $(srctree)/common/system_map.c -o common/system_map.o
Vasili Galkacac8f382014-08-14 12:40:55 +03001783
Marek Behúnc1094982021-05-20 13:24:03 +02001784u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
Paul Burton09bebb82017-06-15 17:05:09 -07001785 +$(call if_changed,u-boot__)
Vasili Galkacac8f382014-08-14 12:40:55 +03001786ifeq ($(CONFIG_KALLSYMS),y)
1787 $(call cmd,smap)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001788 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001789endif
wdenk7ebf7442002-11-02 23:17:16 +00001790
Rick Chen42ac26f2017-12-26 13:55:56 +08001791ifeq ($(CONFIG_RISCV),y)
1792 @tools/prelink-riscv $@ 0
1793endif
1794
Stephen Warren7ed48482016-02-08 14:44:15 -07001795quiet_cmd_sym ?= SYM $@
1796 cmd_sym ?= $(OBJDUMP) -t $< > $@
1797u-boot.sym: u-boot FORCE
1798 $(call if_changed,sym)
1799
Simon Glass86b9c3e2021-10-21 21:08:46 -06001800# Environment processing
1801# ---------------------------------------------------------------------------
1802
1803# Directory where we expect the .env file, if it exists
1804ENV_DIR := $(srctree)/board/$(BOARDDIR)
1805
1806# Basename of .env file, stripping quotes
1807ENV_SOURCE_FILE := $(CONFIG_ENV_SOURCE_FILE:"%"=%)
1808
1809# Filename of .env file
1810ENV_FILE_CFG := $(ENV_DIR)/$(ENV_SOURCE_FILE).env
1811
1812# Default filename, if CONFIG_ENV_SOURCE_FILE is empty
1813ENV_FILE_BOARD := $(ENV_DIR)/$(CONFIG_SYS_BOARD:"%"=%).env
1814
1815# Select between the CONFIG_ENV_SOURCE_FILE and the default one
1816ENV_FILE := $(if $(ENV_SOURCE_FILE),$(ENV_FILE_CFG),$(wildcard $(ENV_FILE_BOARD)))
1817
1818# Run the environment text file through the preprocessor, but only if it is
1819# non-empty, to save time and possible build errors if something is wonky with
1820# the board
1821quiet_cmd_gen_envp = ENVP $@
1822 cmd_gen_envp = \
1823 if [ -s "$(ENV_FILE)" ]; then \
1824 $(CPP) -P $(CFLAGS) -x assembler-with-cpp -D__ASSEMBLY__ \
1825 -D__UBOOT_CONFIG__ \
1826 -I . -I include -I $(srctree)/include \
1827 -include linux/kconfig.h -include include/config.h \
1828 -I$(srctree)/arch/$(ARCH)/include \
1829 $< -o $@; \
1830 else \
1831 echo -n >$@ ; \
1832 fi
1833include/generated/env.in: include/generated/env.txt FORCE
1834 $(call cmd,gen_envp)
1835
1836# Regenerate the environment if it changes
1837# We use 'wildcard' since the file is not required to exist (at present), in
1838# which case we don't want this dependency, but instead should create an empty
1839# file
1840# This rule is useful since it shows the source file for the environment
1841quiet_cmd_envc = ENVC $@
1842 cmd_envc = \
1843 if [ -f "$<" ]; then \
1844 cat $< > $@; \
1845 elif [ -n "$(ENV_SOURCE_FILE)" ]; then \
1846 echo "Missing file $(ENV_FILE_CFG)"; \
1847 else \
1848 echo -n >$@ ; \
1849 fi
1850
1851include/generated/env.txt: $(wildcard $(ENV_FILE)) FORCE
1852 $(call cmd,envc)
1853
1854# Write out the resulting environment, converted to a C string
1855quiet_cmd_gen_envt = ENVT $@
1856 cmd_gen_envt = \
1857 awk -f $(srctree)/scripts/env2string.awk $< >$@
1858$(env_h): include/generated/env.in
1859 $(call cmd,gen_envt)
1860
1861# ---------------------------------------------------------------------------
1862
Michal Simek69c0d322014-04-24 15:24:28 +02001863# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001864# make sure no implicit rule kicks in
1865$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +02001866
Thomas Hebb32f2ca22019-11-13 18:18:03 -08001867# Handle descending into subdirectories listed in $(u-boot-dirs)
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001868# Preset locale variables to speed up the build process. Limit locale
1869# tweaks to this spot to avoid wrong language settings when running
1870# make menuconfig etc.
1871# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001872
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001873PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001874$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001875 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001876
Masahiro Yamada74241452014-02-24 11:12:09 +09001877tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001878# The "tools" are needed early
1879$(filter-out tools, $(u-boot-dirs)): tools
1880# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1881# is "yes"), so compile examples after U-Boot is compiled.
1882examples: $(filter-out examples, $(u-boot-dirs))
1883
Masahiro Yamada74241452014-02-24 11:12:09 +09001884define filechk_uboot.release
1885 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1886endef
1887
1888# Store (new) UBOOTRELEASE string in include/config/uboot.release
Masahiro Yamada51148792014-07-30 14:08:17 +09001889include/config/uboot.release: include/config/auto.conf FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001890 $(call filechk,uboot.release)
1891
1892
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001893# Things we need to do before we recursively start building the kernel
1894# or the modules are listed in "prepare".
1895# A multi level approach is used. prepareN is processed before prepareN-1.
1896# archprepare is used in arch Makefiles and when processed asm symlink,
1897# version.h and scripts_basic is processed / created.
1898
1899# Listed in dependency order
1900PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1901
1902# prepare3 is used to check if we are building in a separate output directory,
1903# and if so do:
1904# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001905prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001906ifneq ($(KBUILD_SRC),)
Masahiro Yamada51148792014-07-30 14:08:17 +09001907 @$(kecho) ' Using $(srctree) as source for U-Boot'
1908 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001909 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1910 echo >&2 " in the '$(srctree)' directory.";\
1911 /bin/false; \
1912 fi;
1913endif
1914
1915# prepare2 creates a makefile if using a separate output directory
Masahiro Yamada0b588de2019-01-10 23:11:39 +09001916prepare2: prepare3 outputmakefile cfg
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001917
Simon Glass86b9c3e2021-10-21 21:08:46 -06001918prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) $(env_h) \
Masahiro Yamada51148792014-07-30 14:08:17 +09001919 include/config/auto.conf
Masahiro Yamada4a377552014-02-25 19:26:48 +09001920ifeq ($(wildcard $(LDSCRIPT)),)
1921 @echo >&2 " Could not find linker script."
1922 @/bin/false
1923endif
wdenk7ebf7442002-11-02 23:17:16 +00001924
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001925ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
1926prepare1: $(defaultenv_h)
Joel Stanley2a2896b2021-06-18 11:35:59 +09301927
1928envtools: $(defaultenv_h)
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001929endif
1930
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001931archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001932
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001933prepare0: archprepare FORCE
1934 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001935
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001936# All the preparing..
1937prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001938
Masahiro Yamada74241452014-02-24 11:12:09 +09001939# Generate some files
1940# ---------------------------------------------------------------------------
1941
Simon Glass68f6a902021-02-04 21:17:13 -07001942# Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
Masahiro Yamada74241452014-02-24 11:12:09 +09001943define filechk_version.h
1944 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1945 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
Simon Glass68f6a902021-02-04 21:17:13 -07001946 echo \#define U_BOOT_VERSION_NUM $(VERSION); \
1947 echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
1948 sed -e "s/^0*//"); \
Vagrant Cascadian42ffa512016-06-12 06:07:07 -07001949 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1950 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
Masahiro Yamada74241452014-02-24 11:12:09 +09001951endef
1952
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001953# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1954# The BSD date on the other hand behaves different and would produce errors
1955# with the misused '-d' switch. Respect that and search a working date with
1956# well known pre- and suffixes for the GNU variant of date.
Masahiro Yamada74241452014-02-24 11:12:09 +09001957define filechk_timestamp.h
Chris Packham70d39f52015-08-13 18:08:27 +12001958 (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1959 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001960 DATE=""; \
1961 for date in gdate date.gnu date; do \
1962 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1963 done; \
1964 if test -n "$${DATE}"; then \
1965 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1966 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1967 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
Heinrich Schuchardtcbf0ffe2020-10-25 07:25:05 +01001968 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001969 else \
1970 return 42; \
1971 fi; \
Chris Packham70d39f52015-08-13 18:08:27 +12001972 else \
1973 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1974 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1975 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
Heinrich Schuchardtcbf0ffe2020-10-25 07:25:05 +01001976 LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
Chris Packham70d39f52015-08-13 18:08:27 +12001977 fi)
Masahiro Yamada74241452014-02-24 11:12:09 +09001978endef
1979
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001980define filechk_defaultenv.h
Rasmus Villemoes7ac70382021-04-22 09:44:18 +02001981 ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001982 tr '\n' '\0' | \
Samuel Mescoff4b7f5f32019-04-15 12:28:26 +02001983 sed -e 's/\\\x0\s*//g' | \
Rasmus Villemoes7ac70382021-04-22 09:44:18 +02001984 xxd -i ; )
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001985endef
1986
Michal Simekdacec832020-02-18 15:03:13 +01001987define filechk_dt.h
1988 (if test -n "$${DEVICE_TREE}"; then \
1989 echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
1990 else \
1991 echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
1992 fi)
1993endef
1994
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09001995$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001996 $(call filechk,version.h)
1997
1998$(timestamp_h): $(srctree)/Makefile FORCE
1999 $(call filechk,timestamp.h)
2000
Michal Simekdacec832020-02-18 15:03:13 +01002001$(dt_h): $(srctree)/Makefile FORCE
2002 $(call filechk,dt.h)
2003
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01002004$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
2005 $(call filechk,defaultenv.h)
2006
Masahiro Yamada63780082014-02-24 11:12:10 +09002007# ---------------------------------------------------------------------------
Tom Rini473fc272021-06-17 18:07:25 -04002008# Devicetree files
2009
2010ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
2011dtstree := arch/$(SRCARCH)/boot/dts
2012endif
2013
2014ifneq ($(dtstree),)
2015
2016%.dtb: prepare3 scripts_dtc
2017 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
2018
2019PHONY += dtbs dtbs_install
2020dtbs: prepare3 scripts_dtc
2021 $(Q)$(MAKE) $(build)=$(dtstree)
2022
2023dtbs_install:
2024 $(Q)$(MAKE) $(dtbinst)=$(dtstree)
2025
2026ifdef CONFIG_OF_EARLY_FLATTREE
2027all: dtbs
2028endif
2029
2030endif
2031
Simon Glass93b19652021-09-22 11:34:44 -06002032# Check dtc and pylibfdt, if DTC is provided, else build them
Tom Rini473fc272021-06-17 18:07:25 -04002033PHONY += scripts_dtc
2034scripts_dtc: scripts_basic
Simon Glass93b19652021-09-22 11:34:44 -06002035 $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
2036 $(MAKE) $(build)=scripts/dtc; \
2037 else \
2038 if ! $(DTC) -v >/dev/null; then \
2039 echo '*** Failed to check dtc version: $(DTC)'; \
2040 false; \
2041 else \
2042 if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
2043 echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
2044 false; \
2045 else \
2046 if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
2047 if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
2048 echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
2049 false; \
2050 fi; \
2051 fi; \
2052 fi; \
2053 fi; \
2054 fi
Tom Rini473fc272021-06-17 18:07:25 -04002055
2056# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09002057quiet_cmd_cpp_lds = LDS $@
Chris Zankelde5e5ce2016-08-10 18:36:43 +03002058cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
Simon Glass44093a12018-10-01 12:22:43 -06002059 -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09002060
Masahiro Yamada04a34c92014-02-24 11:12:19 +09002061u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09002062 $(call if_changed_dep,cpp_lds)
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02002063
Masahiro Yamada982a1192014-02-24 11:12:17 +09002064spl/u-boot-spl.bin: spl/u-boot-spl
2065 @:
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +02002066 $(SPL_SIZE_CHECK)
2067
Dalon Westergreen9773ebc2021-03-01 20:04:16 +08002068spl/u-boot-spl-dtb.bin: spl/u-boot-spl
2069 @:
2070
2071spl/u-boot-spl-dtb.hex: spl/u-boot-spl
2072 @:
2073
Simon Glass054b3a12016-07-04 11:57:57 -06002074spl/u-boot-spl: tools prepare \
M. Vefa Bicakcidd2081a2017-11-11 22:48:40 -05002075 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
2076 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
Masahiro Yamadac7163082014-06-09 15:14:11 +09002077 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00002078
Ian Campbell50827a52014-05-05 11:52:30 +01002079spl/sunxi-spl.bin: spl/u-boot-spl
2080 @:
2081
Maxime Ripardd2fdcc72017-02-27 18:22:13 +01002082spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
2083 @:
2084
Simon Glassbd7dc382016-01-31 18:10:53 -07002085spl/u-boot-spl.sfp: spl/u-boot-spl
Marek Vasut333b7202015-07-15 02:53:45 +02002086 @:
2087
Nathan Rossi08598d62015-11-17 22:56:57 +10002088spl/boot.bin: spl/u-boot-spl
2089 @:
2090
Simon Glass3c00a2c2017-03-26 17:38:15 -06002091tpl/u-boot-tpl.bin: tools prepare \
M. Vefa Bicakcidd2081a2017-11-11 22:48:40 -05002092 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
Masahiro Yamada51148792014-07-30 14:08:17 +09002093 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
Simon Glassc52b5e82019-10-20 21:31:52 -06002094 $(TPL_SIZE_CHECK)
Ying Zhang3aa29de2013-08-16 15:16:15 +08002095
Igor Grinberg8d819ab2014-07-15 15:52:00 +03002096TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01002097
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00002098FIND := find
2099FINDFLAGS := -L
2100
Marian Balakowiczf9328632006-09-01 19:49:50 +02002101tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09002102 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08002103 -name '*.[chS]' -print`
Du Huanpeng74d339b2015-05-04 06:26:53 -07002104 ln -s ctags tags
wdenk7ebf7442002-11-02 23:17:16 +00002105
2106etags:
Igor Grinberg8d819ab2014-07-15 15:52:00 +03002107 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08002108 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08002109cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00002110 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
2111 cscope.files
Andy Shevchenkoe15a9512019-10-08 21:12:45 +03002112 @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
2113 grep -xvf - cscope.files > cscope.files.no-symlinks; \
2114 mv cscope.files.no-symlinks cscope.files
Li Yangffda5862008-02-29 11:46:05 +08002115 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00002116
Mike Frysingerecb1dc82009-05-20 04:35:14 -04002117SYSTEM_MAP = \
2118 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00002119 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04002120 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09002121System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09002122 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00002123
2124#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00002125
Scott Wood54799e42013-12-14 11:47:34 +08002126# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
2127# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09002128checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08002129 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
2130 grep R_A | sort -u`"; \
2131 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
2132 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
2133 echo "$< contains unexpected relocations: $$RELOC"; \
2134 false; \
2135 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02002136
Bin Meng4d90f6c2019-10-27 05:19:47 -07002137tools/version.h: include/version.h
Tom Rinifb013ee2019-12-04 18:54:30 -05002138 $(Q)mkdir -p $(dir $@)
Bin Meng4d90f6c2019-10-27 05:19:47 -07002139 $(call if_changed,copy)
2140
2141envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
Tom Rini2d3229b2017-09-05 14:01:29 -04002142 $(Q)$(MAKE) $(build)=tools/env
Mike Frysinger0358df42010-08-15 00:03:21 -04002143
Simon Goldschmidt25770152019-05-24 22:07:04 +02002144tools-only: export TOOLS_ONLY=y
Bin Meng4d90f6c2019-10-27 05:19:47 -07002145tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
Masahiro Yamada4642e002014-03-31 17:33:51 +09002146 $(Q)$(MAKE) $(build)=tools
2147
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09002148tools-all: export HOST_TOOLS_ALL=y
Simon Glass57332952017-09-05 01:53:58 -06002149tools-all: envtools tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04002150
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09002151cross_tools: export CROSS_BUILD_TOOLS=y
2152cross_tools: tools ;
2153
Wolfgang Denk4e53a252006-10-25 00:43:17 +02002154.PHONY : CHANGELOG
2155CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04002156 git log --no-merges U-Boot-1_1_5.. | \
2157 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02002158
wdenk7ebf7442002-11-02 23:17:16 +00002159#########################################################################
2160
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002161###
2162# Cleaning is done on three levels.
2163# make clean Delete most generated files
2164# Leave enough to build external modules
2165# make mrproper Delete the current configuration, and all generated files
2166# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00002167
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002168# Directories & files removed with 'make clean'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002169CLEAN_DIRS += $(MODVERDIR) \
2170 $(foreach d, spl tpl, $(patsubst %,$d/%, \
Masahiro Yamada51148792014-07-30 14:08:17 +09002171 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002172
Bin Meng4d90f6c2019-10-27 05:19:47 -07002173CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
Simon Glass19a91f22021-10-14 12:47:54 -06002174 u-boot* MLO* SPL System.map fit-dtb.blob* \
Thomas Hebb57297e62019-11-10 08:25:08 -08002175 u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
Thomas Hebb983c0f92019-11-10 08:25:10 -08002176 lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
Marek Behúnc1094982021-05-20 13:24:03 +02002177 idbloader.img flash.bin flash.log defconfig keep-syms-lto.c
Mike Frysinger9f4a4202009-10-01 12:11:54 -04002178
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002179# Directories & files removed with 'make mrproper'
Masahiro Yamada51148792014-07-30 14:08:17 +09002180MRPROPER_DIRS += include/config include/generated spl tpl \
Simon Glassc72c7d92021-07-02 12:36:13 -06002181 .tmp_objdiff doc/output include/asm
Simon Glassa7d03d52021-05-06 19:32:23 -06002182
2183# Remove include/asm symlink created by U-Boot before v2014.01
Masahiro Yamada51148792014-07-30 14:08:17 +09002184MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
Heinrich Schuchardt1249fa82019-01-29 21:15:21 +01002185 ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
Simon Glassa7d03d52021-05-06 19:32:23 -06002186 drivers/video/fonts/*.S include/asm
wdenk7ebf7442002-11-02 23:17:16 +00002187
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002188# clean - Delete most, but leave enough to build external modules
2189#
2190clean: rm-dirs := $(CLEAN_DIRS)
2191clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00002192
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09002193clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00002194
Tom Rini08fcdd32018-07-25 11:38:17 -04002195clean-dirs := $(addprefix _clean_, $(clean-dirs))
wdenk7ebf7442002-11-02 23:17:16 +00002196
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002197PHONY += $(clean-dirs) clean archclean
2198$(clean-dirs):
2199 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
2200
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002201clean: $(clean-dirs)
2202 $(call cmd,rmdirs)
2203 $(call cmd,rmfiles)
2204 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
2205 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
Heinrich Schuchardtd4c51412019-10-03 16:45:29 +00002206 -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002207 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
Eugeniu Roscae91610d2018-05-19 14:13:50 +02002208 -o -name '*.lex.c' -o -name '*.tab.[ch]' \
AKASHI Takahiroed3dead2019-11-13 09:44:54 +09002209 -o -name '*.asn1.[ch]' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002210 -o -name '*.symtypes' -o -name 'modules.order' \
2211 -o -name modules.builtin -o -name '.tmp_*.o.*' \
Bin Meng0fbdaa02016-05-22 01:45:25 -07002212 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
Heinrich Schuchardt7f474ef2018-05-24 19:34:45 +02002213 -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
Thomas Hebb0f18cf32019-11-10 08:25:09 -08002214 -type f -print | xargs rm -f
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002215
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002216# mrproper - Delete all generated files, including .config
2217#
2218mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
2219mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
2220mrproper-dirs := $(addprefix _mrproper_,scripts)
2221
2222PHONY += $(mrproper-dirs) mrproper archmrproper
2223$(mrproper-dirs):
2224 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
2225
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002226mrproper: clean $(mrproper-dirs)
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002227 $(call cmd,rmdirs)
2228 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09002229 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002230
2231# distclean
2232#
2233PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09002234
2235distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002236 @find $(srctree) $(RCS_FIND_IGNORE) \
2237 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
2238 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09002239 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
2240 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002241 -type f -print | xargs rm -f
Robert P. J. Dayc1180aa2019-01-18 08:41:23 -05002242 @rm -f boards.cfg CHANGELOG
wdenk7ebf7442002-11-02 23:17:16 +00002243
2244backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09002245 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04002246 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00002247
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002248help:
2249 @echo 'Cleaning targets:'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002250 @echo ' clean - Remove most generated files but keep the config'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002251 @echo ' mrproper - Remove all generated files + config + various backup files'
2252 @echo ' distclean - mrproper + remove editor backup and patch files'
2253 @echo ''
Masahiro Yamada51148792014-07-30 14:08:17 +09002254 @echo 'Configuration targets:'
2255 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
2256 @echo ''
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002257 @echo 'Test targets:'
2258 @echo ''
2259 @echo ' check - Run all automated tests that use sandbox'
Simon Glass499fde52018-11-18 08:14:29 -07002260 @echo ' qcheck - Run quick automated tests that use sandbox'
Simon Glass76160802020-04-17 18:08:59 -06002261 @echo ' tcheck - Run quick automated tests on tools'
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002262 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002263 @echo 'Other generic targets:'
2264 @echo ' all - Build all necessary images depending on configuration'
Simon Glass633cc7a2016-07-31 17:35:01 -06002265 @echo ' tests - Build U-Boot for sandbox and run tests'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09002266 @echo '* u-boot - Build the bare u-boot'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002267 @echo ' dir/ - Build all files in dir and below'
2268 @echo ' dir/file.[oisS] - Build specified target only'
2269 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
2270 @echo ' (requires a recent binutils and recent build (System.map))'
Igor Grinberg5fc2f922014-07-15 15:52:02 +03002271 @echo ' tags/ctags - Generate ctags file for editors'
2272 @echo ' etags - Generate etags file for editors'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002273 @echo ' cscope - Generate cscope index'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09002274 @echo ' ubootrelease - Output the release version string (use with make -s)'
2275 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
Simon Glass1bd87632016-11-13 14:25:50 -07002276 @echo " cfg - Don't build, just create the .cfg files"
Simon Glass84a42062017-09-05 01:53:59 -06002277 @echo " envtools - Build only the target-side environment tools"
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002278 @echo ''
2279 @echo 'Static analysers'
2280 @echo ' checkstack - Generate a list of stack hogs'
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01002281 @echo ' coccicheck - Execute static code analysis with Coccinelle'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002282 @echo ''
2283 @echo 'Documentation targets:'
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00002284 @$(MAKE) -f $(srctree)/doc/Makefile dochelp
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002285 @echo ''
2286 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
2287 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
2288 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
2289 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
2290 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
2291 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
2292 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
2293 @echo ' 1: warnings which may be relevant and do not occur too often'
2294 @echo ' 2: warnings which occur quite often but may still be relevant'
2295 @echo ' 3: more obscure warnings, can most likely be ignored'
2296 @echo ' Multiple levels can be combined with W=12 or W=123'
2297 @echo ''
2298 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
2299 @echo 'For further info see the ./README file'
2300
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002301tests check:
Simon Glass633cc7a2016-07-31 17:35:01 -06002302 $(srctree)/test/run
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002303
Simon Glass499fde52018-11-18 08:14:29 -07002304qcheck:
2305 $(srctree)/test/run quick
2306
Simon Glass76160802020-04-17 18:08:59 -06002307tcheck:
2308 $(srctree)/test/run tools
2309
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002310# Documentation targets
2311# ---------------------------------------------------------------------------
Mario Six78a88f72018-07-10 08:40:17 +02002312DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
2313 linkcheckdocs dochelp refcheckdocs
2314PHONY += $(DOC_TARGETS)
2315$(DOC_TARGETS): scripts_basic FORCE
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00002316 $(Q)$(MAKE) $(build)=doc $@
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002317
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002318PHONY += checkstack ubootrelease ubootversion
2319
2320checkstack:
2321 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
2322 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
2323
2324ubootrelease:
2325 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
2326
2327ubootversion:
2328 @echo $(UBOOTVERSION)
2329
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002330# Single targets
2331# ---------------------------------------------------------------------------
2332# Single targets are compatible with:
2333# - build with mixed source and output
2334# - build with separate output dir 'make O=...'
2335# - external modules
2336#
2337# target-dir => where to store outputfile
2338# build-dir => directory in kernel source tree to use
2339
2340ifeq ($(KBUILD_EXTMOD),)
2341 build-dir = $(patsubst %/,%,$(dir $@))
2342 target-dir = $(dir $@)
2343else
2344 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
2345 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
2346 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
2347endif
2348
2349%.s: %.c prepare scripts FORCE
2350 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2351%.i: %.c prepare scripts FORCE
2352 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2353%.o: %.c prepare scripts FORCE
2354 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2355%.lst: %.c prepare scripts FORCE
2356 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2357%.s: %.S prepare scripts FORCE
2358 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2359%.o: %.S prepare scripts FORCE
2360 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2361%.symtypes: %.c prepare scripts FORCE
2362 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2363
2364# Modules
2365/: prepare scripts FORCE
2366 $(cmd_crmodverdir)
2367 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2368 $(build)=$(build-dir)
2369%/: prepare scripts FORCE
2370 $(cmd_crmodverdir)
2371 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2372 $(build)=$(build-dir)
2373%.ko: prepare scripts FORCE
2374 $(cmd_crmodverdir)
2375 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2376 $(build)=$(build-dir) $(@:.ko=.o)
2377 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
2378
Jan Kiszka2600dd82021-06-20 22:29:13 +02002379quiet_cmd_genenv = GENENV $@
Stefano Babicbdaa73a2019-03-13 09:46:45 +01002380cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
2381 sed --in-place -e 's/\x00/\x0A/g' $@
2382
2383u-boot-initial-env: u-boot.bin
2384 $(call if_changed,genenv)
2385
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01002386# Consistency checks
2387# ---------------------------------------------------------------------------
2388
2389PHONY += coccicheck
2390
2391coccicheck:
2392 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
2393
Michal Simek69c0d322014-04-24 15:24:28 +02002394# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002395# ===========================================================================
2396
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002397quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
2398 cmd_rmdirs = rm -rf $(rm-dirs)
2399
2400quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
2401 cmd_rmfiles = rm -f $(rm-files)
2402
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09002403# read all saved command lines
2404
Tom Rini473fc272021-06-17 18:07:25 -04002405cmd_files := $(wildcard .*.cmd)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09002406
2407ifneq ($(cmd_files),)
2408 $(cmd_files): ; # Do not try to update included dependency files
2409 include $(cmd_files)
2410endif
2411
Tom Rini473fc272021-06-17 18:07:25 -04002412endif #ifeq ($(config-targets),1)
2413endif #ifeq ($(mixed-targets),1)
Masahiro Yamada9e414032014-02-04 17:24:24 +09002414endif # skip-makefile
2415
2416PHONY += FORCE
2417FORCE:
2418
Tom Rini5972ff02020-03-11 18:11:17 -04002419# Declare the contents of the PHONY variable as phony. We keep that
Masahiro Yamada9e414032014-02-04 17:24:24 +09002420# information in a variable so we can use it in if_changed and friends.
2421.PHONY: $(PHONY)