blob: e66aadf97e0c9c41908689937c0ab64fd6837579 [file] [log] [blame]
Stefan Roese566806c2007-10-05 17:11:30 +02001/*
Grant Erickson8a24c072008-05-22 14:44:24 -07002 * Copyright (c) 2008 Nuovation System Designs, LLC
3 * Grant Erickson <gerickson@nuovations.com>
4 *
Stefan Roese566806c2007-10-05 17:11:30 +02005 * (C) Copyright 2007
6 * Stefan Roese, DENX Software Engineering, sr@denx.de.
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/************************************************************************
28 * kilauea.h - configuration for AMCC Kilauea (405EX)
29 ***********************************************************************/
30
31#ifndef __CONFIG_H
32#define __CONFIG_H
33
34/*-----------------------------------------------------------------------
35 * High Level Configuration Options
36 *----------------------------------------------------------------------*/
37#define CONFIG_KILAUEA 1 /* Board is Kilauea */
38#define CONFIG_4xx 1 /* ... PPC4xx family */
39#define CONFIG_405EX 1 /* Specifc 405EX support*/
40#define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */
41
Wolfgang Denk2ae18242010-10-06 09:05:45 +020042#ifndef CONFIG_SYS_TEXT_BASE
43#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
44#endif
45
Stefan Roese490f2042008-06-06 15:55:03 +020046/*
Steven A. Falco644362c2011-05-05 10:08:35 -040047 * CHIP_21 errata - you must set this to match your exact CPU, else your
48 * board will not boot. DO NOT enable this unless you have JTAG available
49 * for recovery, in the event you get it wrong.
50 *
51 * Kilauea uses the 405EX, while Haleakala uses the 405EXr. Either board
52 * may be equipped for security or not. You must look at the CPU part
53 * number to be sure what you have.
54 */
55/* #define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY */
56/* #define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY */
57/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY */
58/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY */
59
60/*
Stefan Roese490f2042008-06-06 15:55:03 +020061 * Include common defines/options for all AMCC eval boards
62 */
63#define CONFIG_HOSTNAME kilauea
64#include "amcc-common.h"
65
Stefan Roese566806c2007-10-05 17:11:30 +020066#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
67#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
Stefan Roese9998b132010-01-21 11:37:31 +010068#define CONFIG_BOARD_TYPES
Stefan Roese353f2682007-10-23 10:10:08 +020069#define CONFIG_BOARD_EMAC_COUNT
Stefan Roese566806c2007-10-05 17:11:30 +020070
71/*-----------------------------------------------------------------------
72 * Base addresses -- Note these are effective addresses where the
73 * actual resources get mapped (not physical addresses)
74 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020075#define CONFIG_SYS_FLASH_BASE 0xFC000000
76#define CONFIG_SYS_NAND_ADDR 0xF8000000
77#define CONFIG_SYS_FPGA_BASE 0xF0000000
Stefan Roese566806c2007-10-05 17:11:30 +020078
79/*-----------------------------------------------------------------------
Grant Erickson8a24c072008-05-22 14:44:24 -070080 * Initial RAM & Stack Pointer Configuration Options
81 *
82 * There are traditionally three options for the primordial
83 * (i.e. initial) stack usage on the 405-series:
84 *
85 * 1) On-chip Memory (OCM) (i.e. SRAM)
86 * 2) Data cache
87 * 3) SDRAM
88 *
89 * For the 405EX(r), there is no OCM, so we are left with (2) or (3)
90 * the latter of which is less than desireable since it requires
91 * setting up the SDRAM and ECC in assembly code.
92 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093 * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
Grant Erickson8a24c072008-05-22 14:44:24 -070094 * select on the External Bus Controller (EBC) and then select a
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020095 * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
96 * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
97 * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
Grant Erickson8a24c072008-05-22 14:44:24 -070098 * physical SDRAM to use (3).
99 *-----------------------------------------------------------------------*/
100
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200101#define CONFIG_SYS_INIT_DCACHE_CS 4
Grant Erickson8a24c072008-05-22 14:44:24 -0700102
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#if defined(CONFIG_SYS_INIT_DCACHE_CS)
104#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
Grant Erickson8a24c072008-05-22 14:44:24 -0700105#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */
107#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
Grant Erickson8a24c072008-05-22 14:44:24 -0700108
Wolfgang Denk553f0982010-10-26 13:32:32 +0200109#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200110#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Stefan Roese566806c2007-10-05 17:11:30 +0200111
Grant Erickson8a24c072008-05-22 14:44:24 -0700112/*
113 * If the data cache is being used for the primordial stack and global
114 * data area, the POST word must be placed somewhere else. The General
115 * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
116 * its compare and mask register contents across reset, so it is used
117 * for the POST word.
118 */
119
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120#if defined(CONFIG_SYS_INIT_DCACHE_CS)
121# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Michael Zaidman800eb092010-09-20 08:51:53 +0200122# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
Grant Erickson8a24c072008-05-22 14:44:24 -0700123#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124# define CONFIG_SYS_INIT_EXTRA_SIZE 16
125# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200126# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR
127#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
Stefan Roese566806c2007-10-05 17:11:30 +0200128
129/*-----------------------------------------------------------------------
130 * Serial Port
131 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200132#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
Stefan Roese550650d2010-09-20 16:05:31 +0200133#define CONFIG_CONS_INDEX 1 /* Use UART0 */
Stefan Roese566806c2007-10-05 17:11:30 +0200134
Stefan Roese566806c2007-10-05 17:11:30 +0200135/*-----------------------------------------------------------------------
136 * Environment
137 *----------------------------------------------------------------------*/
138#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200139#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
Stefan Roese566806c2007-10-05 17:11:30 +0200140#else
Jean-Christophe PLAGNIOL-VILLARD51bfee12008-09-10 22:47:58 +0200141#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200142#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */
Stefan Roese566806c2007-10-05 17:11:30 +0200143#endif
144
145/*-----------------------------------------------------------------------
146 * FLASH related
147 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200149#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Stefan Roese566806c2007-10-05 17:11:30 +0200150
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
152#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
153#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
Stefan Roese566806c2007-10-05 17:11:30 +0200154
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
156#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
Stefan Roese566806c2007-10-05 17:11:30 +0200157
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200158#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
159#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
Stefan Roese566806c2007-10-05 17:11:30 +0200160
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200161#ifdef CONFIG_ENV_IS_IN_FLASH
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200162#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200164#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
Stefan Roese566806c2007-10-05 17:11:30 +0200165
166/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200167#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
168#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200169#endif /* CONFIG_ENV_IS_IN_FLASH */
Stefan Roese566806c2007-10-05 17:11:30 +0200170
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100171/*
172 * IPL (Initial Program Loader, integrated inside CPU)
173 * Will load first 4k from NAND (SPL) into cache and execute it from there.
174 *
175 * SPL (Secondary Program Loader)
176 * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
177 * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
178 * controller and the NAND controller so that the special U-Boot image can be
179 * loaded from NAND to SDRAM.
180 *
181 * NUB (NAND U-Boot)
182 * This NAND U-Boot (NUB) is a special U-Boot version which can be started
183 * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
184 *
Stefan Roeseec724f82008-06-02 17:13:55 +0200185 * On 405EX the SPL is copied to SDRAM before the NAND controller is
186 * set up. While still running from location 0xfffff000...0xffffffff the
187 * NAND controller cannot be accessed since it is attached to CS0 too.
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100188 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200189#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
190#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
191#define CONFIG_SYS_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */
192#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
193#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */
194#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100195
196/*
197 * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
198 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
200#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100201
202/*
203 * Now the NAND chip has to be defined (no autodetection used!)
204 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200205#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */
206#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
207#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */
208#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
209#define CONFIG_SYS_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100210
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_SYS_NAND_ECCSIZE 256
212#define CONFIG_SYS_NAND_ECCBYTES 3
213#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
214#define CONFIG_SYS_NAND_OOBSIZE 16
215#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
216#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100217
Jean-Christophe PLAGNIOL-VILLARD51bfee12008-09-10 22:47:58 +0200218#ifdef CONFIG_ENV_IS_IN_NAND
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100219/*
220 * For NAND booting the environment is embedded in the U-Boot image. Please take
221 * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
222 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200223#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
224#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200225#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100226#endif
227
228/*-----------------------------------------------------------------------
229 * NAND FLASH
230 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231#define CONFIG_SYS_MAX_NAND_DEVICE 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200232#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
233#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100234
Stefan Roese566806c2007-10-05 17:11:30 +0200235/*-----------------------------------------------------------------------
236 * DDR SDRAM
237 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */
Stefan Roese566806c2007-10-05 17:11:30 +0200239
Adam Grahamf6b6c452008-09-03 12:26:59 -0700240/*
241 * CONFIG_PPC4xx_DDR_AUTOCALIBRATION
242 *
243 * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx
244 * SDRAM Controller DDR autocalibration values and takes a lot longer
245 * to run than Method_B.
246 * (See the Method_A and Method_B algorithm discription in the file:
Stefan Roesea47a12b2010-04-15 16:07:28 +0200247 * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
Adam Grahamf6b6c452008-09-03 12:26:59 -0700248 * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
249 *
250 * DDR Autocalibration Method_B is the default.
251 */
Stefan Roese5b346912009-07-27 07:42:37 +0200252#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
Adam Grahamf6b6c452008-09-03 12:26:59 -0700253#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
254#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
255#undef CONFIG_PPC4xx_DDR_METHOD_A
Stefan Roese5b346912009-07-27 07:42:37 +0200256#endif
Adam Grahamf6b6c452008-09-03 12:26:59 -0700257
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200258#define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE)
Grant Erickson8a24c072008-05-22 14:44:24 -0700259
260/* DDR1/2 SDRAM Device Control Register Data Values */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200261#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \
Grant Erickson8a24c072008-05-22 14:44:24 -0700262 SDRAM_RXBAS_SDSZ_256MB | \
263 SDRAM_RXBAS_SDAM_MODE7 | \
264 SDRAM_RXBAS_SDBE_ENABLE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200265#define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
266#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
267#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
268#define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_PMU_OPEN | \
Grant Erickson2e205082008-07-09 16:46:35 -0700269 SDRAM_MCOPT1_8_BANKS | \
270 SDRAM_MCOPT1_DDR2_TYPE | \
271 SDRAM_MCOPT1_QDEP | \
272 SDRAM_MCOPT1_DCOO_DISABLED)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
274#define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700275 SDRAM_MODT_EB0R_ENABLE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200276#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
277#define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \
Grant Erickson2e205082008-07-09 16:46:35 -0700278 SDRAM_CODT_CKLZ_36OHM | \
279 SDRAM_CODT_DQS_1_8_V_DDR2 | \
280 SDRAM_CODT_IO_NMODE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200281#define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560)
282#define CONFIG_SYS_SDRAM0_INITPLR0 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700283 SDRAM_INITPLR_IMWT_ENCODE(80) | \
284 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285#define CONFIG_SYS_SDRAM0_INITPLR1 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700286 SDRAM_INITPLR_IMWT_ENCODE(3) | \
287 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
288 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
289 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200290#define CONFIG_SYS_SDRAM0_INITPLR2 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700291 SDRAM_INITPLR_IMWT_ENCODE(2) | \
292 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
293 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \
294 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200295#define CONFIG_SYS_SDRAM0_INITPLR3 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700296 SDRAM_INITPLR_IMWT_ENCODE(2) | \
297 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
298 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \
299 SDRAM_INITPLR_IMA_ENCODE(0))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200300#define CONFIG_SYS_SDRAM0_INITPLR4 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700301 SDRAM_INITPLR_IMWT_ENCODE(2) | \
302 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
303 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
304 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \
305 JEDEC_MA_EMR_RTT_75OHM))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200306#define CONFIG_SYS_SDRAM0_INITPLR5 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700307 SDRAM_INITPLR_IMWT_ENCODE(2) | \
308 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
309 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
310 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
311 JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
312 JEDEC_MA_MR_BLEN_4 | \
313 JEDEC_MA_MR_DLL_RESET))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200314#define CONFIG_SYS_SDRAM0_INITPLR6 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700315 SDRAM_INITPLR_IMWT_ENCODE(3) | \
316 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
317 SDRAM_INITPLR_IBA_ENCODE(0x0) | \
318 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200319#define CONFIG_SYS_SDRAM0_INITPLR7 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700320 SDRAM_INITPLR_IMWT_ENCODE(26) | \
321 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200322#define CONFIG_SYS_SDRAM0_INITPLR8 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700323 SDRAM_INITPLR_IMWT_ENCODE(26) | \
324 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200325#define CONFIG_SYS_SDRAM0_INITPLR9 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700326 SDRAM_INITPLR_IMWT_ENCODE(26) | \
327 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200328#define CONFIG_SYS_SDRAM0_INITPLR10 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700329 SDRAM_INITPLR_IMWT_ENCODE(26) | \
330 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200331#define CONFIG_SYS_SDRAM0_INITPLR11 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700332 SDRAM_INITPLR_IMWT_ENCODE(2) | \
333 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
334 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
335 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
336 JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
337 JEDEC_MA_MR_BLEN_4))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200338#define CONFIG_SYS_SDRAM0_INITPLR12 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700339 SDRAM_INITPLR_IMWT_ENCODE(2) | \
340 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
341 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
342 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \
343 JEDEC_MA_EMR_RDQS_DISABLE | \
344 JEDEC_MA_EMR_DQS_DISABLE | \
345 JEDEC_MA_EMR_RTT_DISABLED | \
346 JEDEC_MA_EMR_ODS_NORMAL))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347#define CONFIG_SYS_SDRAM0_INITPLR13 (SDRAM_INITPLR_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700348 SDRAM_INITPLR_IMWT_ENCODE(2) | \
349 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
350 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
351 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
352 JEDEC_MA_EMR_RDQS_DISABLE | \
353 JEDEC_MA_EMR_DQS_DISABLE | \
354 JEDEC_MA_EMR_RTT_DISABLED | \
355 JEDEC_MA_EMR_ODS_NORMAL))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200356#define CONFIG_SYS_SDRAM0_INITPLR14 (SDRAM_INITPLR_DISABLE)
357#define CONFIG_SYS_SDRAM0_INITPLR15 (SDRAM_INITPLR_DISABLE)
358#define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700359 SDRAM_RQDC_RQFD_ENCODE(56))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200360#define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(521)
361#define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2)
362#define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \
Grant Erickson2e205082008-07-09 16:46:35 -0700363 SDRAM_DLCR_DLCS_CONT_DONE | \
364 SDRAM_DLCR_DLCV_ENCODE(165))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200365#define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV)
366#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000
367#define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \
Grant Erickson2e205082008-07-09 16:46:35 -0700368 SDRAM_SDTR1_RTW_2_CLK | \
369 SDRAM_SDTR1_RTRO_1_CLK)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200370#define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \
Grant Erickson2e205082008-07-09 16:46:35 -0700371 SDRAM_SDTR2_WTR_2_CLK | \
372 SDRAM_SDTR2_XSNR_32_CLK | \
373 SDRAM_SDTR2_WPC_4_CLK | \
374 SDRAM_SDTR2_RPC_2_CLK | \
375 SDRAM_SDTR2_RP_3_CLK | \
376 SDRAM_SDTR2_RRD_2_CLK)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200377#define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8) | \
Grant Erickson2e205082008-07-09 16:46:35 -0700378 SDRAM_SDTR3_RC_ENCODE(11) | \
379 SDRAM_SDTR3_XCS | \
380 SDRAM_SDTR3_RFC_ENCODE(26))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200381#define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \
Grant Erickson2e205082008-07-09 16:46:35 -0700382 SDRAM_MMODE_DCL_DDR2_4_0_CLK | \
383 SDRAM_MMODE_BLEN_4)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200384#define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_DISABLE | \
Grant Erickson2e205082008-07-09 16:46:35 -0700385 SDRAM_MEMODE_RTT_75OHM)
Grant Erickson8a24c072008-05-22 14:44:24 -0700386
Stefan Roese566806c2007-10-05 17:11:30 +0200387/*-----------------------------------------------------------------------
388 * I2C
389 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200390#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
Stefan Roese566806c2007-10-05 17:11:30 +0200391
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200392#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
393#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
Stefan Roesef6af8ce2009-07-21 14:33:52 +0200394#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
395#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
Stefan Roese566806c2007-10-05 17:11:30 +0200396
Stefan Roese4b1389e2009-07-21 14:06:29 +0200397/* I2C bootstrap EEPROM */
398#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52
399#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
400#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
401
Stefan Roese566806c2007-10-05 17:11:30 +0200402/* Standard DTT sensor configuration */
403#define CONFIG_DTT_DS1775 1
404#define CONFIG_DTT_SENSORS { 0 }
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200405#define CONFIG_SYS_I2C_DTT_ADDR 0x48
Stefan Roese566806c2007-10-05 17:11:30 +0200406
407/* RTC configuration */
408#define CONFIG_RTC_DS1338 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200409#define CONFIG_SYS_I2C_RTC_ADDR 0x68
Stefan Roese566806c2007-10-05 17:11:30 +0200410
411/*-----------------------------------------------------------------------
412 * Ethernet
413 *----------------------------------------------------------------------*/
414#define CONFIG_M88E1111_PHY 1
415#define CONFIG_IBM_EMAC4_V4 1
Grant Erickson1740c1b2008-07-08 08:35:00 -0700416#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_RGMII_RGMII
Stefan Roese566806c2007-10-05 17:11:30 +0200417#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
418
419#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
420#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
421
422#define CONFIG_HAS_ETH0 1
423
Stefan Roese566806c2007-10-05 17:11:30 +0200424#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
425#define CONFIG_PHY1_ADDR 2
426
Adam Grahamf6b6c452008-09-03 12:26:59 -0700427/* Debug messages for the DDR autocalibration */
428#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
429
Stefan Roese490f2042008-06-06 15:55:03 +0200430/*
431 * Default environment variables
432 */
Stefan Roese566806c2007-10-05 17:11:30 +0200433#define CONFIG_EXTRA_ENV_SETTINGS \
Stefan Roese490f2042008-06-06 15:55:03 +0200434 CONFIG_AMCC_DEF_ENV \
435 CONFIG_AMCC_DEF_ENV_POWERPC \
436 CONFIG_AMCC_DEF_ENV_PPC_OLD \
437 CONFIG_AMCC_DEF_ENV_NOR_UPD \
438 CONFIG_AMCC_DEF_ENV_NAND_UPD \
Stefan Roese566806c2007-10-05 17:11:30 +0200439 "logversion=2\0" \
Stefan Roese566806c2007-10-05 17:11:30 +0200440 "kernel_addr=fc000000\0" \
Stefan Roese64e541f2008-04-11 07:02:29 +0200441 "fdt_addr=fc1e0000\0" \
Stefan Roese566806c2007-10-05 17:11:30 +0200442 "ramdisk_addr=fc200000\0" \
Stefan Roese566806c2007-10-05 17:11:30 +0200443 "pciconfighost=1\0" \
Stefan Roesed4cb2d12007-10-13 16:43:23 +0200444 "pcie_mode=RP:RP\0" \
Stefan Roese566806c2007-10-05 17:11:30 +0200445 ""
Stefan Roese566806c2007-10-05 17:11:30 +0200446
447/*
Stefan Roese490f2042008-06-06 15:55:03 +0200448 * Commands additional to the ones defined in amcc-common.h
Stefan Roese566806c2007-10-05 17:11:30 +0200449 */
Stefan Roese4b1389e2009-07-21 14:06:29 +0200450#define CONFIG_CMD_CHIP_CONFIG
Stefan Roese566806c2007-10-05 17:11:30 +0200451#define CONFIG_CMD_DATE
Stefan Roese566806c2007-10-05 17:11:30 +0200452#define CONFIG_CMD_LOG
Stefan Roese566806c2007-10-05 17:11:30 +0200453#define CONFIG_CMD_NAND
Stefan Roese566806c2007-10-05 17:11:30 +0200454#define CONFIG_CMD_PCI
Stefan Roeseafe9fa52007-10-22 16:24:44 +0200455#define CONFIG_CMD_SNTP
Stefan Roese566806c2007-10-05 17:11:30 +0200456
Stefan Roesedd7c3022009-04-15 14:08:48 +0200457/*
458 * Don't run the memory POST on the NAND-booting version. It will
459 * overwrite part of the U-Boot image which is already loaded from NAND
460 * to SDRAM.
461 */
462#if defined(CONFIG_NAND_U_BOOT)
463#define CONFIG_SYS_POST_MEMORY_ON 0
464#else
465#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY
466#endif
467
Stefan Roese566806c2007-10-05 17:11:30 +0200468/* POST support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200469#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \
470 CONFIG_SYS_POST_CPU | \
471 CONFIG_SYS_POST_ETHER | \
472 CONFIG_SYS_POST_I2C | \
Stefan Roesedd7c3022009-04-15 14:08:48 +0200473 CONFIG_SYS_POST_MEMORY_ON | \
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200474 CONFIG_SYS_POST_UART)
Stefan Roese566806c2007-10-05 17:11:30 +0200475
476/* Define here the base-addresses of the UARTs to test in POST */
Stefan Roese5d7c73e2010-09-29 16:58:38 +0200477#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \
478 CONFIG_SYS_NS16550_COM2 }
Stefan Roese566806c2007-10-05 17:11:30 +0200479
480#define CONFIG_LOGBUFFER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200481#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */
Stefan Roese566806c2007-10-05 17:11:30 +0200482
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200483#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
Stefan Roese566806c2007-10-05 17:11:30 +0200484
Stefan Roese566806c2007-10-05 17:11:30 +0200485/*-----------------------------------------------------------------------
486 * PCI stuff
487 *----------------------------------------------------------------------*/
488#define CONFIG_PCI /* include pci support */
489#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
490#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
491#define CONFIG_PCI_CONFIG_HOST_BRIDGE
492
493/*-----------------------------------------------------------------------
494 * PCIe stuff
495 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200496#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
497#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */
Stefan Roese566806c2007-10-05 17:11:30 +0200498
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200499#define CONFIG_SYS_PCIE0_CFGBASE 0xa0000000 /* remote access */
500#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 /* local access */
501#define CONFIG_SYS_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */
Stefan Roese566806c2007-10-05 17:11:30 +0200502
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200503#define CONFIG_SYS_PCIE1_CFGBASE 0xc0000000 /* remote access */
504#define CONFIG_SYS_PCIE1_XCFGBASE 0xd0000000 /* local access */
505#define CONFIG_SYS_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */
Stefan Roese566806c2007-10-05 17:11:30 +0200506
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200507#define CONFIG_SYS_PCIE0_UTLBASE 0xef502000
508#define CONFIG_SYS_PCIE1_UTLBASE 0xef503000
Stefan Roese566806c2007-10-05 17:11:30 +0200509
510/* base address of inbound PCIe window */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200511#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL
Stefan Roese566806c2007-10-05 17:11:30 +0200512
Stefan Roese566806c2007-10-05 17:11:30 +0200513/*-----------------------------------------------------------------------
Stefan Roese566806c2007-10-05 17:11:30 +0200514 * External Bus Controller (EBC) Setup
515 *----------------------------------------------------------------------*/
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100516#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
517/* booting from NAND, so NAND chips select has to be on CS 0 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200518#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100519
520/* Memory Bank 1 (NOR-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200521#define CONFIG_SYS_EBC_PB1AP 0x05806500
522#define CONFIG_SYS_EBC_PB1CR 0xFC0DA000 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100523
524/* Memory Bank 0 (NAND-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200525#define CONFIG_SYS_EBC_PB0AP 0x018003c0
526#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1e000)
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100527#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200528#define CONFIG_SYS_NAND_CS 1 /* NAND chip connected to CSx */
Stefan Roese566806c2007-10-05 17:11:30 +0200529
530/* Memory Bank 0 (NOR-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200531#define CONFIG_SYS_EBC_PB0AP 0x05806500
532#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
Stefan Roese566806c2007-10-05 17:11:30 +0200533
534/* Memory Bank 1 (NAND-FLASH) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200535#define CONFIG_SYS_EBC_PB1AP 0x018003c0
536#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_ADDR | 0x1e000)
Stefan Roese3d6cb3b2007-11-03 12:08:28 +0100537#endif
Stefan Roese566806c2007-10-05 17:11:30 +0200538
Stefan Roese9998b132010-01-21 11:37:31 +0100539/* Memory Bank 2 (FPGA) initialization */
540#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_ENABLED | \
541 EBC_BXAP_FWT_ENCODE(6) | \
542 EBC_BXAP_BWT_ENCODE(1) | \
543 EBC_BXAP_BCE_DISABLE | \
544 EBC_BXAP_BCT_2TRANS | \
545 EBC_BXAP_CSN_ENCODE(0) | \
546 EBC_BXAP_OEN_ENCODE(0) | \
547 EBC_BXAP_WBN_ENCODE(3) | \
548 EBC_BXAP_WBF_ENCODE(1) | \
549 EBC_BXAP_TH_ENCODE(4) | \
550 EBC_BXAP_RE_DISABLED | \
551 EBC_BXAP_SOR_DELAYED | \
552 EBC_BXAP_BEM_WRITEONLY | \
553 EBC_BXAP_PEN_DISABLED)
554#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE | 0x18000)
Stefan Roese566806c2007-10-05 17:11:30 +0200555
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200556#define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */
Stefan Roese566806c2007-10-05 17:11:30 +0200557
558/*-----------------------------------------------------------------------
Stefan Roese566806c2007-10-05 17:11:30 +0200559 * GPIO Setup
560 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200561#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
Stefan Roese9ea61b52007-11-17 14:52:29 +0100562{ \
563/* GPIO Core 0 */ \
564{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \
565{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1) */ \
566{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2) */ \
567{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3) */ \
568{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20) USB2_DATA(4) */ \
569{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21) USB2_DATA(5) */ \
570{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22) USB2_DATA(6) */ \
571{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23) USB2_DATA(7) */ \
Stefan Roese8be76092007-11-27 11:57:35 +0100572{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1) IRQ(7) */ \
573{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2) IRQ(8) */ \
574{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3) IRQ(9) */ \
Stefan Roese9ea61b52007-11-17 14:52:29 +0100575{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6) */ \
576{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16) USB2_DATA(0) */ \
577{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17) USB2_DATA(1) */ \
Stefan Roese7cfc12a2007-12-08 14:47:34 +0100578{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18) USB2_DATA(2) */ \
579{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19) USB2_DATA(3) */ \
Stefan Roese9ea61b52007-11-17 14:52:29 +0100580{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD UART1_CTS */ \
Stefan Roese8be76092007-11-27 11:57:35 +0100581{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR UART1_RTS */ \
Stefan Roese9ea61b52007-11-17 14:52:29 +0100582{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS */ \
583{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS */ \
584{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR UART1_TX */ \
585{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI UART1_RX */ \
586{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ DMA_ACK2 */ \
587{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK DMA_REQ2 */ \
588{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ DMA_EOT2 IRQ(4) */ \
589{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK DMA_ACK3 IRQ(3) */ \
590{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5) DMA_EOT0 TS(3) */ \
591{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ DMA_EOT3 IRQ(5) */ \
592{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO28 */ \
Stefan Roese8be76092007-11-27 11:57:35 +0100593{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1 IRQ(2) */ \
594{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO30 DMA_REQ1 IRQ(1) */ \
595{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO31 DMA_ACK1 IRQ(0) */ \
Stefan Roese9ea61b52007-11-17 14:52:29 +0100596} \
597}
Stefan Roese566806c2007-10-05 17:11:30 +0200598
Stefan Roese566806c2007-10-05 17:11:30 +0200599/*-----------------------------------------------------------------------
600 * Some Kilauea stuff..., mainly fpga registers
601 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200602#define CONFIG_SYS_FPGA_REG_BASE CONFIG_SYS_FPGA_BASE
Stefan Roese9998b132010-01-21 11:37:31 +0100603#define CONFIG_SYS_FPGA_FIFO_BASE (CONFIG_SYS_FPGA_BASE | (1 << 10))
Stefan Roese566806c2007-10-05 17:11:30 +0200604
605/* interrupt */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200606#define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT 0x80000000
607#define CONFIG_SYS_FPGA_SLIC0_W_DPRAM_INT 0x40000000
608#define CONFIG_SYS_FPGA_SLIC1_R_DPRAM_INT 0x20000000
609#define CONFIG_SYS_FPGA_SLIC1_W_DPRAM_INT 0x10000000
610#define CONFIG_SYS_FPGA_PHY0_INT 0x08000000
611#define CONFIG_SYS_FPGA_PHY1_INT 0x04000000
612#define CONFIG_SYS_FPGA_SLIC0_INT 0x02000000
613#define CONFIG_SYS_FPGA_SLIC1_INT 0x01000000
Stefan Roese566806c2007-10-05 17:11:30 +0200614
615/* DPRAM setting */
616/* 00: 32B; 01: 64B; 10: 128B; 11: 256B */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200617#define CONFIG_SYS_FPGA_DPRAM_R_INT_LINE 0x00400000 /* 64 B */
618#define CONFIG_SYS_FPGA_DPRAM_W_INT_LINE 0x00100000 /* 64 B */
619#define CONFIG_SYS_FPGA_DPRAM_RW_TYPE 0x00080000
620#define CONFIG_SYS_FPGA_DPRAM_RST 0x00040000
621#define CONFIG_SYS_FPGA_UART0_FO 0x00020000
622#define CONFIG_SYS_FPGA_UART1_FO 0x00010000
Stefan Roese566806c2007-10-05 17:11:30 +0200623
624/* loopback */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200625#define CONFIG_SYS_FPGA_CHIPSIDE_LOOPBACK 0x00004000
626#define CONFIG_SYS_FPGA_LINESIDE_LOOPBACK 0x00008000
627#define CONFIG_SYS_FPGA_SLIC0_ENABLE 0x00002000
628#define CONFIG_SYS_FPGA_SLIC1_ENABLE 0x00001000
629#define CONFIG_SYS_FPGA_SLIC0_CS 0x00000800
630#define CONFIG_SYS_FPGA_SLIC1_CS 0x00000400
631#define CONFIG_SYS_FPGA_USER_LED0 0x00000200
632#define CONFIG_SYS_FPGA_USER_LED1 0x00000100
Stefan Roese566806c2007-10-05 17:11:30 +0200633
Stefan Roese9998b132010-01-21 11:37:31 +0100634#define CONFIG_SYS_FPGA_MAGIC_MASK 0xffff0000
635#define CONFIG_SYS_FPGA_MAGIC 0xabcd0000
636#define CONFIG_SYS_FPGA_VER_MASK 0x0000ff00
637
Stefan Roese837c7302007-10-21 14:26:29 +0200638#endif /* __CONFIG_H */