blob: 9be24c4ec6138a6e614bca84beca897dd8d4607c [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001# SPDX-License-Identifier: GPL-2.0+
Tom Rinida58dec2015-11-10 01:06:16 +00002
Tom Rini88bd8ee2022-11-07 15:27:03 -05003VERSION = 2023
Tom Riniff296ac2023-07-25 17:19:54 -04004PATCHLEVEL = 10
Wolfgang Denk211e4752012-07-10 09:21:12 +02005SUBLEVEL =
Tom Rinib27eeca2023-09-04 10:39:43 -04006EXTRAVERSION = -rc4
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +09007NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +01008
Masahiro Yamada6825a952014-02-04 17:24:28 +09009# *DOCUMENTATION*
10# To see a list of typical targets execute "make help"
11# More info can be located in ./README
12# Comments in this file are targeted only to the developer, do not
13# expect to learn how to build the kernel reading this file.
14
Tom Rini473fc272021-06-17 18:07:25 -040015# Do not use make's built-in rules and variables
16# (this increases performance and avoids hard-to-debug behaviour)
17MAKEFLAGS += -rR
Masahiro Yamada6825a952014-02-04 17:24:28 +090018
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010019# Determine target architecture for the sandbox
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010020include include/host_arch.h
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010021ifeq ("", "$(CROSS_COMPILE)")
22 MK_ARCH="${shell uname -m}"
23else
Mark Kettenis1a16e662022-05-05 16:42:23 +020024 MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\2/p'}"
Heinrich Schuchardtf7691a62021-02-10 18:54:25 +010025endif
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010026unexport HOST_ARCH
27ifeq ("x86_64", $(MK_ARCH))
28 export HOST_ARCH=$(HOST_ARCH_X86_64)
29else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
30 export HOST_ARCH=$(HOST_ARCH_X86)
31else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
32 export HOST_ARCH=$(HOST_ARCH_AARCH64)
Heinrich Schuchardtecd4e5c2022-05-07 22:58:39 +020033else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7a" "armv7l"))
Heinrich Schuchardt3b4847c2019-11-07 08:05:17 +010034 export HOST_ARCH=$(HOST_ARCH_ARM)
35else ifeq ("riscv32", $(MK_ARCH))
36 export HOST_ARCH=$(HOST_ARCH_RISCV32)
37else ifeq ("riscv64", $(MK_ARCH))
38 export HOST_ARCH=$(HOST_ARCH_RISCV64)
39endif
40undefine MK_ARCH
41
Masahiro Yamada6825a952014-02-04 17:24:28 +090042# Avoid funny character set dependencies
43unexport LC_ALL
44LC_COLLATE=C
45LC_NUMERIC=C
46export LC_COLLATE LC_NUMERIC
47
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090048# Avoid interference with shell env settings
49unexport GREP_OPTIONS
50
Masahiro Yamada6825a952014-02-04 17:24:28 +090051# We are using a recursive build, so we need to do a little thinking
52# to get the ordering right.
53#
54# Most importantly: sub-Makefiles should only ever modify files in
55# their own directory. If in some directory we have a dependency on
56# a file in another dir (which doesn't happen often, but it's often
57# unavoidable when linking the built-in.o targets which finally
58# turn into vmlinux), we will call a sub make in that other dir, and
59# after that we are sure that everything which is in that other dir
60# is now up to date.
61#
62# The only cases where we need to modify files which have global
63# effects are thus separated out and done before the recursive
64# descending is started. They are now explicitly listed as the
65# prepare rule.
66
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090067# Beautify output
68# ---------------------------------------------------------------------------
69#
70# Normally, we echo the whole command before executing it. By making
71# that echo $($(quiet)$(cmd)), we now have the possibility to set
72# $(quiet) to choose other forms of output instead, e.g.
73#
74# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
75# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
76#
77# If $(quiet) is empty, the whole command will be printed.
78# If it is set to "quiet_", only the short version will be printed.
79# If it is set to "silent_", nothing will be printed at all, since
80# the variable $(silent_cmd_cc_o_c) doesn't exist.
81#
82# A simple variant is to prefix commands with $(Q) - that's useful
83# for commands that shall be hidden in non-verbose mode.
84#
85# $(Q)ln $@ :<
86#
87# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
88# If KBUILD_VERBOSE equals 1 then the above command is displayed.
89#
Masahiro Yamada6825a952014-02-04 17:24:28 +090090# To put more focus on warnings, be less verbose as default
91# Use 'make V=1' to see the full commands
92
93ifeq ("$(origin V)", "command line")
94 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000095endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090096ifndef KBUILD_VERBOSE
97 KBUILD_VERBOSE = 0
98endif
99
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900100ifeq ($(KBUILD_VERBOSE),1)
101 quiet =
102 Q =
103else
104 quiet=quiet_
105 Q = @
Masahiro Yamada6825a952014-02-04 17:24:28 +0900106endif
107
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900108# If the user is running make -s (silent mode), suppress echoing of
109# commands
110
111ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
112ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
113 quiet=silent_
114endif
115else # make-3.8x
116ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
117 quiet=silent_
118endif
Masahiro Yamada6825a952014-02-04 17:24:28 +0900119endif
120
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900121export quiet Q KBUILD_VERBOSE
Masahiro Yamada6825a952014-02-04 17:24:28 +0900122
Masahiro Yamada9e414032014-02-04 17:24:24 +0900123# kbuild supports saving output files in a separate directory.
124# To locate output files in a separate directory two syntaxes are supported.
125# In both cases the working directory must be the root of the kernel src.
126# 1) O=
127# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +0200128#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900129# 2) Set KBUILD_OUTPUT
130# Set the environment variable KBUILD_OUTPUT to point to the directory
131# where the output files shall be placed.
132# export KBUILD_OUTPUT=dir/to/store/output/files/
133# make
Stefan Roese887e2ec2006-09-07 11:51:23 +0200134#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900135# The O= assignment takes precedence over the KBUILD_OUTPUT environment
136# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000137
Masahiro Yamada9e414032014-02-04 17:24:24 +0900138# KBUILD_SRC is set on invocation of make in OBJ directory
139# KBUILD_SRC is not intended to be used by the regular user (for now)
140ifeq ($(KBUILD_SRC),)
141
142# OK, Make called in directory where kernel src resides
143# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200144ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900145 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200146endif
wdenk7ebf7442002-11-02 23:17:16 +0000147
Masahiro Yamada9e414032014-02-04 17:24:24 +0900148# That's our default target when none is given on the command line
149PHONY := _all
150_all:
151
152# Cancel implicit rules on top Makefile
153$(CURDIR)/Makefile Makefile: ;
154
155ifneq ($(KBUILD_OUTPUT),)
156# Invoke a second make in the output directory, passing relevant variables
157# check that the output directory actually exists
158saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900159KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
160 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900161$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900162 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900163
Tom Rini473fc272021-06-17 18:07:25 -0400164# Look for make include files relative to root of kernel src
165#
166# This does not become effective immediately because MAKEFLAGS is re-parsed
167# once after the Makefile is read. It is OK since we are going to invoke
168# 'sub-make' below.
169MAKEFLAGS += --include-dir=$(CURDIR)
170
Masahiro Yamada9e414032014-02-04 17:24:24 +0900171PHONY += $(MAKECMDGOALS) sub-make
172
173$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
174 @:
175
176sub-make: FORCE
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900177 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
178 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900179
180# Leave processing to above invocation of make
181skip-makefile := 1
182endif # ifneq ($(KBUILD_OUTPUT),)
183endif # ifeq ($(KBUILD_SRC),)
184
185# We process the rest of the Makefile if this is the final invocation of make
186ifeq ($(skip-makefile),)
187
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900188# Do not print "Entering directory ...",
189# but we want to display it when entering to the output directory
190# so that IDEs/editors are able to understand relative filenames.
191MAKEFLAGS += --no-print-directory
192
193# Call a source code checker (by default, "sparse") as part of the
194# C compilation.
195#
196# Use 'make C=1' to enable checking of only re-compiled files.
197# Use 'make C=2' to enable checking of *all* source files, regardless
198# of whether they are re-compiled or not.
199#
Breno Matheus Lima656d8da2019-06-05 18:18:30 +0000200# See the file "doc/sparse.txt" for more details, including
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900201# where to get the "sparse" utility.
202
203ifeq ("$(origin C)", "command line")
204 KBUILD_CHECKSRC = $(C)
205endif
206ifndef KBUILD_CHECKSRC
207 KBUILD_CHECKSRC = 0
208endif
209
210# Use make M=dir to specify directory of external module to build
211# Old syntax make ... SUBDIRS=$PWD is still supported
212# Setting the environment variable KBUILD_EXTMOD take precedence
213ifdef SUBDIRS
214 KBUILD_EXTMOD ?= $(SUBDIRS)
215endif
216
217ifeq ("$(origin M)", "command line")
218 KBUILD_EXTMOD := $(M)
219endif
220
Masahiro Yamada6825a952014-02-04 17:24:28 +0900221# If building an external module we do not care about the all: rule
222# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900223PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900224ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900225_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900226else
227_all: modules
228endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900229
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900230ifeq ($(KBUILD_SRC),)
231 # building in the source tree
232 srctree := .
233else
234 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
235 # building in a subdirectory of the source tree
236 srctree := ..
237 else
238 srctree := $(KBUILD_SRC)
239 endif
240endif
241objtree := .
Masahiro Yamada9e414032014-02-04 17:24:24 +0900242src := $(srctree)
243obj := $(objtree)
244
245VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
246
247export srctree objtree VPATH
248
Wolfgang Denk5013c092008-03-02 22:45:33 +0100249# Make sure CDPATH settings don't interfere
250unexport CDPATH
251
Marian Balakowiczf9328632006-09-01 19:49:50 +0200252#########################################################################
253
wdenk7ebf7442002-11-02 23:17:16 +0000254HOSTARCH := $(shell uname -m | \
255 sed -e s/i.86/x86/ \
256 -e s/sun4u/sparc64/ \
257 -e s/arm.*/arm/ \
258 -e s/sa110/arm/ \
259 -e s/ppc64/powerpc/ \
260 -e s/ppc/powerpc/ \
261 -e s/macppc/powerpc/\
262 -e s/sh.*/sh/)
263
264HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
265 sed -e 's/\(cygwin\).*/cygwin/')
266
267export HOSTARCH HOSTOS
268
wdenk7ebf7442002-11-02 23:17:16 +0000269#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200270
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400271# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100272ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400273CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000274endif
wdenk7ebf7442002-11-02 23:17:16 +0000275
Masahiro Yamada51148792014-07-30 14:08:17 +0900276KCONFIG_CONFIG ?= .config
277export KCONFIG_CONFIG
278
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900279# SHELL used by kbuild
280CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
281 else if [ -x /bin/bash ]; then echo /bin/bash; \
282 else echo sh; fi ; fi)
283
Tom Rini587e4a42020-03-27 11:46:27 -0400284HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
285HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
286HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
287
Jeroen Hofsteeb477fe42014-09-10 20:08:51 +0200288HOSTCC = cc
289HOSTCXX = c++
Tom Rini587e4a42020-03-27 11:46:27 -0400290KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
Simon Glassb47ef6b2020-07-19 13:56:08 -0600291 $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
Tom Rini587e4a42020-03-27 11:46:27 -0400292KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
293KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
294KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900295
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200296# With the move to GCC 6, we have implicitly upgraded our language
297# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
298# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
299# have older compilers as their default, so we make it explicit for
300# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
Tom Rinifa893992018-06-19 23:53:54 -0400301CSTD_FLAG := -std=gnu11
Tom Rini587e4a42020-03-27 11:46:27 -0400302KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
Philipp Tomsich9de4f952018-05-14 15:22:06 +0200303
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900304ifeq ($(HOSTOS),cygwin)
Tom Rini587e4a42020-03-27 11:46:27 -0400305KBUILD_HOSTCFLAGS += -ansi
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900306endif
307
308# Mac OS X / Darwin's C preprocessor is Apple specific. It
309# generates numerous errors and warnings. We want to bypass it
310# and use GNU C's cpp. To do this we pass the -traditional-cpp
311# option to the compiler. Note that the -traditional-cpp flag
312# DOES NOT have the same semantics as GNU C's flag, all it does
313# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
314#
315# Apple's linker is similar, thanks to the new 2 stage linking
316# multiple symbol definitions are treated as errors, hence the
317# -multiply_defined suppress option to turn off this error.
318#
319ifeq ($(HOSTOS),darwin)
320# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
Christian Marangi748c1ab2023-01-22 01:42:10 +0100321DARWIN_MAJOR_VERSION := $(shell sw_vers -productVersion | cut -f 1 -d '.')
322DARWIN_MINOR_VERSION := $(shell sw_vers -productVersion | cut -f 2 -d '.')
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900323
324os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
325 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
326
默默ab8fc412019-03-31 16:07:03 +0800327os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
Wolfgang Denk0a50b3c2021-09-27 17:42:38 +0200328 $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
默默ab8fc412019-03-31 16:07:03 +0800329
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900330# Snow Leopards build environment has no longer restrictions as described above
331HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
Tom Rini587e4a42020-03-27 11:46:27 -0400332KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
333KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
Andreas Bießmann1fddd7b2015-02-09 00:06:10 +0100334
Wolfgang Denk0a50b3c2021-09-27 17:42:38 +0200335# macOS Mojave (10.14.X)
默默ab8fc412019-03-31 16:07:03 +0800336# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
Tom Rini587e4a42020-03-27 11:46:27 -0400337KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900338endif
339
Masahiro Yamada6825a952014-02-04 17:24:28 +0900340# Decide whether to build built-in, modular, or both.
341# Normally, just do built-in.
342
343KBUILD_MODULES :=
344KBUILD_BUILTIN := 1
345
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900346# If we have only "make modules", don't compile built-in objects.
347# When we're building modules with modversions, we need to consider
348# the built-in objects during the descend as well, in order to
349# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900350
351ifeq ($(MAKECMDGOALS),modules)
352 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
353endif
354
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900355# If we have "make <whatever> modules", compile modules
356# in addition to whatever we do anyway.
357# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900358
359# U-Boot does not need modules
360#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
361# KBUILD_MODULES := 1
362#endif
363
364#ifeq ($(MAKECMDGOALS),)
365# KBUILD_MODULES := 1
366#endif
367
Simon Glassb51882d2019-09-25 08:56:28 -0600368# Check ths size of a binary:
369# Args:
370# $1: File to check
371# #2: Size limit in bytes (decimal or 0xhex)
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200372define size_check
373 actual=$$( wc -c $1 | awk '{print $$1}'); \
374 limit=$$( printf "%d" $2 ); \
375 if test $$actual -gt $$limit; then \
376 echo "$1 exceeds file size limit:" >&2; \
Tom Rini90037eb2019-10-23 15:39:41 -0400377 echo " limit: $$(printf %#x $$limit) bytes" >&2; \
Simon Glassb51882d2019-09-25 08:56:28 -0600378 echo " actual: $$(printf %#x $$actual) bytes" >&2; \
379 echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200380 exit 1; \
381 fi
382endef
383export size_check
384
Masahiro Yamada6825a952014-02-04 17:24:28 +0900385export KBUILD_MODULES KBUILD_BUILTIN
386export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
387
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900388# We need some generic definitions (do not try to remake the file).
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900389scripts/Kbuild.include: ;
390include scripts/Kbuild.include
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900391
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900392# Make variables (CC, etc...)
393
394AS = $(CROSS_COMPILE)as
395# Always use GNU ld
396ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
397LD = $(CROSS_COMPILE)ld.bfd
398else
399LD = $(CROSS_COMPILE)ld
400endif
401CC = $(CROSS_COMPILE)gcc
402CPP = $(CC) -E
403AR = $(CROSS_COMPILE)ar
404NM = $(CROSS_COMPILE)nm
405LDR = $(CROSS_COMPILE)ldr
406STRIP = $(CROSS_COMPILE)strip
407OBJCOPY = $(CROSS_COMPILE)objcopy
408OBJDUMP = $(CROSS_COMPILE)objdump
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200409LEX = flex
410YACC = bison
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900411AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900412PERL = perl
Stefano Babicb48bfc72017-04-05 17:46:41 +0200413PYTHON ?= python
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200414PYTHON2 = python2
Andrey Zhizhikinf68ed0b2021-05-01 22:12:21 +0200415PYTHON3 ?= python3
Simon Glass93b19652021-09-22 11:34:44 -0600416
417# The devicetree compiler and pylibfdt are automatically built unless DTC is
418# provided. If DTC is provided, it is assumed the pylibfdt is available too.
419DTC_INTREE := $(objtree)/scripts/dtc/dtc
420DTC ?= $(DTC_INTREE)
421DTC_MIN_VERSION := 010406
422
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900423CHECK = sparse
424
425CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
Christophe Leroy6ab7c3d2023-05-05 10:39:39 +0200426 -Wbitwise -Wno-return-void -Wno-unknown-attribute \
427 -D__CHECK_ENDIAN__ $(CF)
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900428
Masahiro Yamada3b612972014-08-31 15:16:53 +0900429KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900430
431KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
432 -Wno-format-security \
Tom Rinifa893992018-06-19 23:53:54 -0400433 -fno-builtin -ffreestanding $(CSTD_FLAG)
Bin Meng5bc11922018-09-16 22:35:28 -0700434KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900435KBUILD_AFLAGS := -D__ASSEMBLY__
Tom Rini587e4a42020-03-27 11:46:27 -0400436KBUILD_LDFLAGS :=
437
438ifeq ($(cc-name),clang)
439ifneq ($(CROSS_COMPILE),)
440CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
Tom Rinifd0712a2023-04-05 19:48:52 -0400441LDPPFLAGS += $(CLANG_TARGET)
Tom Rini587e4a42020-03-27 11:46:27 -0400442GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
443CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
444GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
445endif
446ifneq ($(GCC_TOOLCHAIN),)
447CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
448endif
449KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
450KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
451KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
452KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
453endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900454
Andy Shevchenko6ace36e2018-08-06 19:00:22 +0300455# Don't generate position independent code
456KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
457KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
458
Masahiro Yamada74241452014-02-24 11:12:09 +0900459# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
460UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
461UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900462
Masahiro Yamada74241452014-02-24 11:12:09 +0900463export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900464export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Tom Rini587e4a42020-03-27 11:46:27 -0400465export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
466export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200467export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
Tom Rini587e4a42020-03-27 11:46:27 -0400468export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900469
Tom Rini587e4a42020-03-27 11:46:27 -0400470export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900471export KBUILD_CFLAGS KBUILD_AFLAGS
472
Tom Rini5972ff02020-03-11 18:11:17 -0400473export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
474
Masahiro Yamada6825a952014-02-04 17:24:28 +0900475# When compiling out-of-tree modules, put MODVERDIR in the module
476# tree rather than in the kernel tree. The kernel tree might
477# even be read-only.
478export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
479
480# Files to ignore in find ... statements
481
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900482export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
483 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
484 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900485export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
486 --exclude CVS --exclude .pc --exclude .hg --exclude .git
487
488# ===========================================================================
489# Rules shared between *config targets and build targets
490
491# Basic helpers built in scripts/
492PHONY += scripts_basic
493scripts_basic:
494 $(Q)$(MAKE) $(build)=scripts/basic
495 $(Q)rm -f .tmp_quiet_recordmcount
496
497# To avoid any implicit rule to kick in, define an empty command.
498scripts/basic/%: scripts_basic ;
499
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900500PHONY += outputmakefile
501# outputmakefile generates a Makefile in the output directory, if using a
502# separate output directory. This allows convenient use of make in the
503# output directory.
504outputmakefile:
505ifneq ($(KBUILD_SRC),)
506 $(Q)ln -fsn $(srctree) source
Tom Rini473fc272021-06-17 18:07:25 -0400507 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900508endif
509
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900510# To make sure we do not include .config for any of the *config targets
511# catch them early, and hand them over to scripts/kconfig/Makefile
512# It is allowed to specify more targets when calling make, including
513# mixing *config targets and build targets.
514# For example 'make oldconfig all'.
515# Detect when mixed targets is specified, and make a second invocation
516# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900517
Masahiro Yamada74241452014-02-24 11:12:09 +0900518version_h := include/generated/version_autogenerated.h
519timestamp_h := include/generated/timestamp_autogenerated.h
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +0100520defaultenv_h := include/generated/defaultenv_autogenerated.h
Michal Simekdacec832020-02-18 15:03:13 +0100521dt_h := include/generated/dt.h
Simon Glass86b9c3e2021-10-21 21:08:46 -0600522env_h := include/generated/environment.h
Masahiro Yamada74241452014-02-24 11:12:09 +0900523
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900524no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900525 help %docs check% coccicheck \
Simon Glassd1962ac2022-08-06 17:51:59 -0600526 ubootversion backup tests check pcheck qcheck tcheck \
Simon Glass75554df2023-02-23 18:18:06 -0700527 pylint pylint_err _pip pip pip_test pip_release
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900528
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900529config-targets := 0
530mixed-targets := 0
531dot-config := 1
532
533ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
534 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
535 dot-config := 0
536 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900537endif
538
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900539ifeq ($(KBUILD_EXTMOD),)
540 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
541 config-targets := 1
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900542 ifneq ($(words $(MAKECMDGOALS)),1)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900543 mixed-targets := 1
544 endif
545 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900546endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900547
548ifeq ($(mixed-targets),1)
549# ===========================================================================
550# We're called with mixed targets (*config and build targets).
551# Handle them one by one.
552
Masahiro Yamadae7734402014-08-05 15:56:44 +0900553PHONY += $(MAKECMDGOALS) __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900554
Masahiro Yamadae7734402014-08-05 15:56:44 +0900555$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900556 @:
557
Masahiro Yamadae7734402014-08-05 15:56:44 +0900558__build_one_by_one:
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900559 $(Q)set -e; \
560 for i in $(MAKECMDGOALS); do \
561 $(MAKE) -f $(srctree)/Makefile $$i; \
562 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900563
564else
565ifeq ($(config-targets),1)
566# ===========================================================================
567# *config targets only - make sure prerequisites are updated, and descend
568# in scripts/kconfig to make the *config target
569
Masahiro Yamada51148792014-07-30 14:08:17 +0900570KBUILD_DEFCONFIG := sandbox_defconfig
571export KBUILD_DEFCONFIG KBUILD_KCONFIG
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900572
Masahiro Yamada51148792014-07-30 14:08:17 +0900573config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900574 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada51148792014-07-30 14:08:17 +0900575
576%config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900577 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900578
579else
580# ===========================================================================
581# Build targets only - this includes vmlinux, arch specific targets, clean
582# targets and others. In general all targets except *config targets.
583
Masahiro Yamada61304db2017-01-30 11:12:07 +0900584# Additional helpers built in scripts/
585# Carefully list dependencies so we do not try to build scripts twice
586# in parallel
587PHONY += scripts
Tom Rini473fc272021-06-17 18:07:25 -0400588scripts: scripts_basic scripts_dtc include/config/auto.conf
Masahiro Yamada61304db2017-01-30 11:12:07 +0900589 $(Q)$(MAKE) $(build)=$(@)
590
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900591ifeq ($(dot-config),1)
592# Read in config
Masahiro Yamada51148792014-07-30 14:08:17 +0900593-include include/config/auto.conf
594
595# Read in dependencies to all Kconfig* files, make sure to run
596# oldconfig if changes are detected.
597-include include/config/auto.conf.cmd
598
599# To avoid any implicit rule to kick in, define an empty command
600$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
601
602# If .config is newer than include/config/auto.conf, someone tinkered
603# with it and forgot to run make oldconfig.
604# if auto.conf.cmd is missing then we are probably in a cleaned tree so
605# we execute the config step to be sure to catch updated Kconfig files
606include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
Eugeniu Roscae91610d2018-05-19 14:13:50 +0200607 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900608 @# If the following part fails, include/config/auto.conf should be
609 @# deleted so "make silentoldconfig" will be re-run on the next build.
610 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
611 { rm -f include/config/auto.conf; false; }
612 @# include/config.h has been updated after "make silentoldconfig".
613 @# We need to touch include/config/auto.conf so it gets newer
614 @# than include/config.h.
615 @# Otherwise, 'make silentoldconfig' would be invoked twice.
616 $(Q)touch include/config/auto.conf
Masahiro Yamada51148792014-07-30 14:08:17 +0900617
Masahiro Yamada0b588de2019-01-10 23:11:39 +0900618u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
Philipp Tomsich0d982c52017-07-05 17:30:40 +0200619 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
620
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900621-include include/autoconf.mk
622-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900623
Masahiro Yamada51148792014-07-30 14:08:17 +0900624# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
625# is up-to-date. When we switch to a different board configuration, old CONFIG
626# macros are still remaining in include/config/auto.conf. Without the following
627# gimmick, wrong config.mk would be included leading nasty warnings/errors.
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900628ifneq ($(wildcard $(KCONFIG_CONFIG)),)
629ifneq ($(wildcard include/config/auto.conf),)
630autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
631 include/config/auto.conf)
632ifeq ($(autoconf_is_old),)
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900633include config.mk
634include arch/$(ARCH)/Makefile
Masahiro Yamadaced07152014-02-04 17:24:21 +0900635endif
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900636endif
637endif
Simon Glassfada9e22013-04-20 08:42:36 +0000638
Simon Glassbb1ae552016-11-07 08:47:07 -0700639# These are set by the arch-specific config.mk. Make sure they are exported
640# so they can be used when building an EFI application.
641export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
642export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
643export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
644export CFLAGS_EFI # Compiler flags to add when building EFI app
645export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
646export EFI_TARGET # binutils target if EFI is natively supported
647
Simon Glassa55014d2022-08-03 12:13:08 -0600648export LTO_ENABLE
649
650# This is y if LTO is enabled for this build. See NO_LTO=1 to disable LTO
651ifeq ($(NO_LTO),)
652LTO_ENABLE=$(if $(CONFIG_LTO),y)
653endif
654
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000655# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
656# that (or fail if absent). Otherwise, search for a linker script in a
657# standard location.
658
659ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900660 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000661 ifdef CONFIG_SYS_LDSCRIPT
662 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900663 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000664 endif
665endif
666
Simon Glassee601972011-11-21 10:49:37 +0000667# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000668ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000669 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900670 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000671 endif
672 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900673 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000674 endif
675 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900676 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000677 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000678endif
679
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900680else
Masahiro Yamada51148792014-07-30 14:08:17 +0900681# Dummy target needed, because used as prerequisite
682include/config/auto.conf: ;
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900683endif # $(dot-config)
684
Heinrich Schuchardt9b78c922022-06-16 13:43:50 +0200685ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
686KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -Og -g -fomit-frame-pointer \
687 $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
Heinrich Schuchardt8602d972022-07-31 10:06:13 +0200688# Avoid false positives -Wmaybe-uninitialized
689# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78394
690KBUILD_HOSTCFLAGS += -Wno-maybe-uninitialized
Heinrich Schuchardt9b78c922022-06-16 13:43:50 +0200691KBUILD_HOSTCXXFLAGS := -Og -g $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
692endif
693
Chris Zankelde5e5ce2016-08-10 18:36:43 +0300694#
695# Xtensa linker script cannot be preprocessed with -ansi because of
696# preprocessor operations on strings that don't make C identifiers.
697#
698ifeq ($(CONFIG_XTENSA),)
699LDPPFLAGS += -ansi
700endif
701
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900702ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
703KBUILD_CFLAGS += -Os
Sean Andersonf38cb2a2022-02-22 12:19:24 -0500704endif
705
706ifdef CONFIG_CC_OPTIMIZE_FOR_SPEED
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900707KBUILD_CFLAGS += -O2
708endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900709
Sean Andersone9765042022-02-22 12:19:25 -0500710ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
Heinrich Schuchardt8602d972022-07-31 10:06:13 +0200711KBUILD_CFLAGS += -Og -Wno-maybe-uninitialized
712# Avoid false positives -Wmaybe-uninitialized
713# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78394
714KBUILD_CFLAGS += -Wno-maybe-uninitialized
Sean Andersone9765042022-02-22 12:19:25 -0500715endif
716
Marek Behúnc1094982021-05-20 13:24:03 +0200717LTO_CFLAGS :=
718LTO_FINAL_LDFLAGS :=
719export LTO_CFLAGS LTO_FINAL_LDFLAGS
Simon Glassa55014d2022-08-03 12:13:08 -0600720ifeq ($(LTO_ENABLE),y)
Marek Behúnc1094982021-05-20 13:24:03 +0200721 ifeq ($(cc-name),clang)
Simon Glassa55014d2022-08-03 12:13:08 -0600722 LTO_CFLAGS += -DLTO_ENABLE -flto
Marek Behúnc1094982021-05-20 13:24:03 +0200723 LTO_FINAL_LDFLAGS += -flto
724
725 AR = $(shell $(CC) -print-prog-name=llvm-ar)
726 NM = $(shell $(CC) -print-prog-name=llvm-nm)
727 else
728 NPROC := $(shell nproc 2>/dev/null || echo 1)
Simon Glassa55014d2022-08-03 12:13:08 -0600729 LTO_CFLAGS += -DLTO_ENABLE -flto=$(NPROC)
Marek Behúnc1094982021-05-20 13:24:03 +0200730 LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
731
732 # use plugin aware tools
733 AR = $(CROSS_COMPILE)gcc-ar
734 NM = $(CROSS_COMPILE)gcc-nm
735 endif
736
737 CFLAGS_NON_EFI += $(LTO_CFLAGS)
738
739 KBUILD_CFLAGS += $(LTO_CFLAGS)
740endif
741
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200742ifeq ($(CONFIG_STACKPROTECTOR),y)
743KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
744CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
745else
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900746KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200747endif
Prabhakar Kushwaha687a7512015-07-02 12:00:17 +0530748KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900749
Tom Rini473fc272021-06-17 18:07:25 -0400750# disable pointer signed / unsigned warnings in gcc 4.0
751KBUILD_CFLAGS += -Wno-pointer-sign
752
Tom Rini587e4a42020-03-27 11:46:27 -0400753# disable stringop warnings in gcc 8+
754KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
755
Tom Rinic48b7812021-05-03 16:48:57 -0400756KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
757KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
758KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
759
Tom Rini443f2232020-05-14 08:30:02 -0400760# Enabled with W=2, disabled by default as noisy
761KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
762
Masahiro Yamada1eb2e712018-04-16 13:18:31 +0900763# change __FILE__ to the relative path from the srctree
764KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
765
Tom Rini409e4b52022-11-22 12:31:54 -0500766KBUILD_CFLAGS += -gdwarf-4
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900767# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
768# option to the assembler.
Tom Rini409e4b52022-11-22 12:31:54 -0500769KBUILD_AFLAGS += -gdwarf-4
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900770
771# Report stack usage if supported
Alexey Brodkin948071b2018-04-02 12:18:02 +0300772# ARC tools based on GCC 7.1 has an issue with stack usage
773# with naked functions, see commit message for more details
774ifndef CONFIG_ARC
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900775ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
776 KBUILD_CFLAGS += -fstack-usage
777endif
Alexey Brodkin948071b2018-04-02 12:18:02 +0300778endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900779
780KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
Andy Shevchenko53dc8ae2019-11-29 19:47:59 +0200781KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
782
Tom Rini473fc272021-06-17 18:07:25 -0400783ifdef CONFIG_CC_IS_CLANG
Tom Rini4760fe22018-04-22 10:20:50 -0400784KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
785KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
786KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
Tom Rini587e4a42020-03-27 11:46:27 -0400787KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
788# Quiet clang warning: comparison of unsigned expression < 0 is always false
789KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
790# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
791# source of a reference will be _MergedGlobals and not on of the whitelisted names.
792# See modpost pattern 2
793KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
Tom Rini4760fe22018-04-22 10:20:50 -0400794KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
Tom Rini52ee1a02023-02-27 17:08:33 -0500795KBUILD_CFLAGS += $(call cc-disable-warning, deprecated-non-prototype)
Tom Rini473fc272021-06-17 18:07:25 -0400796endif
Tom Rini587e4a42020-03-27 11:46:27 -0400797
798# These warnings generated too much noise in a regular build.
799# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
800KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900801
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900802# Prohibit date/time macros, which would make the build non-deterministic
803KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
804
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900805include scripts/Makefile.extrawarn
Masahiro Yamada6419e142014-08-05 15:56:43 +0900806
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900807# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
808KBUILD_CPPFLAGS += $(KCPPFLAGS)
809KBUILD_AFLAGS += $(KAFLAGS)
810KBUILD_CFLAGS += $(KCFLAGS)
811
Tom Rini57450d82023-02-14 15:09:31 -0500812KBUILD_LDFLAGS += -z noexecstack
Tom Rini1e1c51f2022-12-07 15:49:43 -0500813KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
814
Simon Glassb47ef6b2020-07-19 13:56:08 -0600815KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
816
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900817# Use UBOOTINCLUDE when you must reference the include/ directory.
818# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900819UBOOTINCLUDE := \
Heinrich Schuchardt0053d262020-04-10 11:10:32 +0200820 -Iinclude \
821 $(if $(KBUILD_SRC), -I$(srctree)/include) \
822 $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
823 $(if $(CONFIG_HAS_THUMB2), \
824 $(if $(CONFIG_CPU_V7M), \
825 -I$(srctree)/arch/arm/thumb1/include), \
826 -I$(srctree)/arch/arm/thumb1/include)) \
827 -I$(srctree)/arch/$(ARCH)/include \
828 -include $(srctree)/include/linux/kconfig.h
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900829
830NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900831
832# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900833cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
834 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900835c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
836
wdenk7ebf7442002-11-02 23:17:16 +0000837#########################################################################
838# U-Boot objects....order is important (i.e. start must be first)
839
Masahiro Yamada9e414032014-02-04 17:24:24 +0900840HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200841
Simon Glass5f57b002021-07-10 21:14:22 -0600842libs-$(CONFIG_API) += api/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900843libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
Simon Glass19a91f22021-10-14 12:47:54 -0600844libs-y += boot/
Simon Glass5f57b002021-07-10 21:14:22 -0600845libs-y += cmd/
846libs-y += common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900847libs-$(CONFIG_OF_EMBED) += dts/
Simon Glass5f57b002021-07-10 21:14:22 -0600848libs-y += env/
849libs-y += lib/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900850libs-y += fs/
851libs-y += net/
852libs-y += disk/
853libs-y += drivers/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900854libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
Shengzhou Liub9e745b2016-08-26 18:30:39 +0800855libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
Ley Foon Tan5918afd2019-05-06 09:55:59 +0800856libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
Vignesh Raghavendra7e91f6c2019-10-01 17:26:33 +0530857libs-y += drivers/usb/cdns3/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530858libs-y += drivers/usb/dwc3/
Sriram Dash93eb8f32016-04-05 14:41:19 +0530859libs-y += drivers/usb/common/
Simon Glass019808f2015-03-25 12:22:37 -0600860libs-y += drivers/usb/emul/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900861libs-y += drivers/usb/eth/
Pali Rohár4cc53ef2021-02-07 14:50:03 +0100862libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
Jean-Jacques Hiblotdb17a922019-01-10 15:44:14 +0100863libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
864libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
Tom Rinib7ad7212021-06-30 13:09:49 -0400865libs-y += drivers/usb/host/
Chunfeng Yune09b88c2020-10-16 11:38:39 +0800866libs-y += drivers/usb/mtu3/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900867libs-y += drivers/usb/musb/
868libs-y += drivers/usb/musb-new/
Rui Miguel Silva88861a22022-06-29 11:06:15 +0100869libs-y += drivers/usb/isp1760/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900870libs-y += drivers/usb/phy/
871libs-y += drivers/usb/ulpi/
Simon Glass50fbd5c2019-12-28 10:44:51 -0700872ifdef CONFIG_POST
873libs-y += post/
874endif
Simon Glassb5508532022-04-30 00:56:47 -0600875libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/
Joe Hershberger421f86f2015-05-20 14:27:36 -0500876libs-$(CONFIG_UT_ENV) += test/env/
Heiko Stuebner96383bd2019-10-23 16:46:41 +0200877libs-$(CONFIG_UT_OPTEE) += test/optee/
Maxime Ripardf2a99422016-07-05 10:26:46 +0200878libs-$(CONFIG_UT_OVERLAY) += test/overlay/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200879
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900880libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900881
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900882libs-y := $(sort $(libs-y))
883
884u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
885
886u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
887
888libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
889
890u-boot-init := $(head-y)
891u-boot-main := $(libs-y)
892
wdenka8c7c702003-12-06 19:49:23 +0000893
wdenk4f7cb082003-09-11 23:06:34 +0000894# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900895ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900896PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200897else
Tom Rini4ad68502023-04-05 19:48:53 -0400898ifndef CONFIG_CC_IS_CLANG
Masahiro Yamada6825a952014-02-04 17:24:28 +0900899PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200900endif
Tom Rini4ad68502023-04-05 19:48:53 -0400901endif
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200902PLATFORM_LIBS += $(PLATFORM_LIBGCC)
Christian Gmeiner52ff8022018-04-09 17:11:45 +0200903
904ifdef CONFIG_CC_COVERAGE
905KBUILD_CFLAGS += --coverage
906PLATFORM_LIBGCC += -lgcov
907endif
908
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200909export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400910export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000911
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400912# Special flags for CPP when processing the linker script.
913# Pass the version down so we can handle backwards compatibility
914# on the fly.
915LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900916 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000917 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400918 $(shell $(LD) --version | \
919 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
920
wdenk7ebf7442002-11-02 23:17:16 +0000921#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000922#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000923
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400924ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
Heinrich Schuchardtb2750302019-04-02 19:19:04 +0200925BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400926else
927BOARD_SIZE_CHECK =
928endif
929
Ovidiu Panait2dfdd0c2020-09-25 21:12:56 +0300930ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
Simon Goldschmidt25770152019-05-24 22:07:04 +0200931SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +0200932else
933SPL_SIZE_CHECK =
934endif
935
Ovidiu Panait2dfdd0c2020-09-25 21:12:56 +0300936ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
Simon Glassc52b5e82019-10-20 21:31:52 -0600937TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
938else
939TPL_SIZE_CHECK =
940endif
941
Simon Glassf86ca5a2022-04-30 00:56:52 -0600942ifneq ($(CONFIG_VPL_SIZE_LIMIT),0x0)
943VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
944else
945VPL_SIZE_CHECK =
946endif
947
Scott Wood8137af12013-12-14 11:47:32 +0800948# Statically apply RELA-style relocations (currently arm64 only)
Álvaro Fernández Rojasd57259b2017-04-20 20:36:25 +0200949# This is useful for arm64 where static relocation needs to be performed on
950# the raw binary, but certain simulators only accept an ELF file (but don't
951# do the relocation).
Scott Wood8137af12013-12-14 11:47:32 +0800952ifneq ($(CONFIG_STATIC_RELA),)
Michal Simekb9566372022-06-24 14:14:59 +0200953# $(2) is u-boot ELF, $(3) is u-boot bin, $(4) is text base
Jan Kiszka7125d2c2020-06-25 08:39:45 +0200954quiet_cmd_static_rela = RELOC $@
955cmd_static_rela = \
Michal Simek4c9e2d62022-06-24 14:14:59 +0200956 tools/relocate-rela $(3) $(2)
Scott Wood8137af12013-12-14 11:47:32 +0800957else
Jan Kiszka7125d2c2020-06-25 08:39:45 +0200958quiet_cmd_static_rela =
Pali Roháre9ebc172020-11-04 15:33:44 +0100959cmd_static_rela =
Scott Wood8137af12013-12-14 11:47:32 +0800960endif
961
Simon Glasse6385c72020-07-19 13:56:01 -0600962# Always append INPUTS so that arch config.mk's can add custom ones
963INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500964
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530965ifeq ($(CONFIG_SPL_FSL_PBL),y)
Simon Glasse6385c72020-07-19 13:56:01 -0600966INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530967else
Tom Rinibba4c7f2020-06-16 19:06:25 -0400968ifneq ($(CONFIG_NXP_ESBC), y)
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530969# For Secure Boot The Image needs to be signed and Header must also
970# be included. So The image has to be built explicitly
Simon Glasse6385c72020-07-19 13:56:01 -0600971INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530972endif
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530973endif
Simon Glasse6385c72020-07-19 13:56:01 -0600974INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
Stefano Babicd714a752019-09-20 08:47:53 +0200975ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600976INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100977else
Stefano Babicd714a752019-09-20 08:47:53 +0200978ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
Simon Glasse6385c72020-07-19 13:56:01 -0600979INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200980else
Simon Glasse6385c72020-07-19 13:56:01 -0600981INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
Sven Ebenfeldd21bd692016-11-06 16:37:56 +0100982endif
Eran Matityahu0004b7a2018-02-28 09:51:50 +0200983endif
Simon Glasse6385c72020-07-19 13:56:01 -0600984INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Simon Glassf86ca5a2022-04-30 00:56:52 -0600985INPUTS-$(CONFIG_VPL) += vpl/u-boot-vpl.bin
Simon Glassb7d8e852021-12-16 20:59:38 -0700986
987# Allow omitting the .dtb output if it is not normally used
988INPUTS-$(CONFIG_OF_SEPARATE) += $(if $(CONFIG_OF_OMIT_DTB),dts/dt.dtb,u-boot.dtb)
Masahiro Yamada2405d092014-05-15 20:37:51 +0900989ifeq ($(CONFIG_SPL_FRAMEWORK),y)
Simon Glasse6385c72020-07-19 13:56:01 -0600990INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
Masahiro Yamada2405d092014-05-15 20:37:51 +0900991endif
Ilias Apalodimase7fb7892021-10-26 09:12:33 +0300992INPUTS-$(CONFIG_SANDBOX) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000993ifneq ($(CONFIG_SPL_TARGET),)
Simon Glasse6385c72020-07-19 13:56:01 -0600994INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000995endif
Simon Glasse6385c72020-07-19 13:56:01 -0600996INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
997INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
998INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
wdenk7ebf7442002-11-02 23:17:16 +0000999
Simon Glasse999bea2020-07-19 13:56:07 -06001000# Generate this input file for binman
1001ifeq ($(CONFIG_SPL),)
Simon Glasse6385c72020-07-19 13:56:01 -06001002INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
Simon Glasse999bea2020-07-19 13:56:07 -06001003endif
Ryder Lee3b975a12018-11-15 10:07:49 +08001004
Stefan Roeseb2b8a692014-10-22 12:13:24 +02001005# Add optional build target if defined in board/cpu/soc headers
1006ifneq ($(CONFIG_BUILD_TARGET),)
Simon Glasse6385c72020-07-19 13:56:01 -06001007INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
Stefan Roeseb2b8a692014-10-22 12:13:24 +02001008endif
1009
AKASHI Takahirodde1b752020-03-10 09:20:43 +09001010ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
Simon Glasse6385c72020-07-19 13:56:01 -06001011INPUTS-y += init_sp_bss_offset_check
Stephen Warren5fed97a2018-01-09 12:52:14 -07001012endif
1013
Simon Glass31f35e82023-01-07 14:07:19 -07001014ifeq ($(CONFIG_ARCH_ROCKCHIP)_$(CONFIG_SPL_FRAMEWORK),y_)
Quentin Schulz001f7882022-09-02 15:10:51 +02001015INPUTS-y += u-boot.img
Simon Glasse999bea2020-07-19 13:56:07 -06001016endif
Matwey V. Kornilov1b0a9362019-09-03 19:29:01 +03001017
Simon Glass42b18df2020-07-19 13:56:03 -06001018INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
1019 $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
1020 $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
1021
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001022LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Joel Stanleye391b1e2017-04-09 20:33:58 +02001023
1024# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
1025LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
1026
Alistair Delva58772282021-10-20 21:31:33 +00001027# ld.lld support
Nick Desaulniers0b943582022-09-26 20:47:40 +00001028LDFLAGS_u-boot += -z notext $(call ld-option,--apply-dynamic-relocs)
Alistair Delva58772282021-10-20 21:31:33 +00001029
Marek Behúnda48bd92021-05-20 13:24:04 +02001030LDFLAGS_u-boot += --build-id=none
1031
Alexey Brodkin10228072018-02-21 13:06:26 +03001032ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
Simon Glass98463902022-10-20 18:22:39 -06001033LDFLAGS_u-boot += -Ttext $(CONFIG_TEXT_BASE)
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001034endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +09001035
Christophe Leroy6ab7c3d2023-05-05 10:39:39 +02001036# make the checker run with the right architecture
1037CHECKFLAGS += --arch=$(ARCH)
1038
Tom Rini5972ff02020-03-11 18:11:17 -04001039# insure the checker run with the right endianness
1040CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
1041
1042# the checker needs the correct machine size
1043CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
1044
Simon Glasse020c882015-07-31 09:31:23 -06001045# Normally we fill empty space with 0xff
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001046quiet_cmd_objcopy = OBJCOPY $@
Simon Glasse020c882015-07-31 09:31:23 -06001047cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
1048 $(OBJCOPYFLAGS_$(@F)) $< $@
1049
1050# Provide a version which does not do this, for use by EFI
1051quiet_cmd_zobjcopy = OBJCOPY $@
1052cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001053
Simon Glass476476e2015-08-04 12:33:52 -06001054quiet_cmd_efipayload = OBJCOPY $@
1055cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
1056
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +01001057MKIMAGEOUTPUT ?= /dev/null
1058
Marek Vasutb97241b2014-03-14 05:00:14 +01001059quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001060cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
Rasmus Villemoes06587612018-03-23 12:08:02 +01001061 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001062
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001063quiet_cmd_mkfitimage = MKIMAGE $@
Simon Glass18e08132020-07-19 13:56:09 -06001064cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
1065 -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
Rasmus Villemoes06587612018-03-23 12:08:02 +01001066 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001067
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001068quiet_cmd_cat = CAT $@
1069cmd_cat = cat $(filter-out $(PHONY), $^) > $@
1070
Masahiro Yamada982a1192014-02-24 11:12:17 +09001071append = cat $(filter-out $< $(PHONY), $^) >> $@
1072
1073quiet_cmd_pad_cat = CAT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001074cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
Masahiro Yamada982a1192014-02-24 11:12:17 +09001075
Weijie Gaoa38f84b2020-04-21 09:28:39 +02001076quiet_cmd_lzma = LZMA $@
1077cmd_lzma = lzma -c -z -k -9 $< > $@
1078
Simon Glass1bd87632016-11-13 14:25:50 -07001079cfg: u-boot.cfg
1080
Simon Glass24f073d2021-12-16 20:59:37 -07001081quiet_cmd_ofcheck = OFCHK $2
1082cmd_ofcheck = $(srctree)/scripts/check-of.sh $2 \
1083 $(srctree)/scripts/of_allowlist.txt
1084
Simon Glass13732522021-03-25 21:24:33 +13001085# Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
1086got = $(foreach cfg,$(1),$($(cfg)))
1087
1088# expected value 'y for each one
1089expect = $(foreach cfg,$(1),y)
1090
1091# Show a deprecation message
1092# Args:
Simon Glass7e9a9002023-02-01 13:19:29 -07001093# 1: List of options to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
Simon Glass13732522021-03-25 21:24:33 +13001094# 2: Name of component (e.g . "Ethernet drivers")
1095# 3: Release deadline (e.g. "v202.07")
1096# 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
1097# Note: Script avoids bash construct, hence the strange double 'if'
1098# (patches welcome!)
1099define deprecated
Simon Glassa0da06d2021-04-01 11:18:13 +13001100 @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
Simon Glass13732522021-03-25 21:24:33 +13001101 echo >&2 "===================== WARNING ======================"; \
1102 echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
1103 echo >&2 "for $(2)). Please update the board to use"; \
1104 echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
1105 echo >&2 "update by the deadline may result in board removal."; \
Johannes Krottmayer1840ce52022-03-01 04:49:50 +01001106 echo >&2 "See doc/develop/driver-model/migration.rst for more info."; \
Simon Glass13732522021-03-25 21:24:33 +13001107 echo >&2 "===================================================="; \
1108 fi; fi
1109
1110endef
1111
Simon Glassc39c7c62022-11-09 19:14:40 -07001112# Timestamp file to make sure that binman always runs
1113.binman_stamp: $(INPUTS-y) FORCE
Simon Glass42b18df2020-07-19 13:56:03 -06001114ifeq ($(CONFIG_BINMAN),y)
1115 $(call if_changed,binman)
1116endif
Simon Glass42b18df2020-07-19 13:56:03 -06001117 @touch $@
Simon Glasse6385c72020-07-19 13:56:01 -06001118
Simon Glassc39c7c62022-11-09 19:14:40 -07001119all: .binman_stamp
1120
Jagan Teki63235bd2019-05-29 17:01:30 -04001121ifeq ($(CONFIG_DEPRECATED),y)
1122 $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
1123endif
Simon Glass26e24d62021-11-03 21:09:05 -06001124ifeq ($(CONFIG_OF_EMBED)$(CONFIG_EFI_APP),y)
Simon Glass06467e42021-03-25 21:24:32 +13001125 @echo >&2 "===================== WARNING ======================"
1126 @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
1127 @echo >&2 "be used for debugging purposes. Please use"
1128 @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
Ralph Siemsendb26c502022-04-28 15:52:59 -04001129 @echo >&2 "See doc/develop/devicetree/control.rst for more info."
Simon Glass06467e42021-03-25 21:24:32 +13001130 @echo >&2 "===================================================="
1131endif
1132ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
1133 @echo >&2 "===================== WARNING ======================"
1134 @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
1135 @echo >&2 "to binman instead, to avoid the proliferation of"
1136 @echo >&2 "arch-specific scripts with no tests."
1137 @echo >&2 "===================================================="
1138endif
Simon Glass78b4a562021-03-25 21:24:41 +13001139 $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
1140 $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
Simon Glass19c969b2021-07-10 21:14:33 -06001141 $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
Tom Rini65cc0e22022-11-16 13:10:41 -05001142 @# CFG_SYS_TIMER_RATE has brackets in it for some boards which
Simon Glass6e4a7ea2021-12-18 11:27:29 -07001143 @# confuses this rule. Use if() to send just a single character which
1144 @# is enable to tell 'deprecated' that one of these symbols exists
Tom Rini65cc0e22022-11-16 13:10:41 -05001145 $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CFG_SYS_TIMER_RATE)$(CFG_SYS_TIMER_COUNTER)),x))
Simon Glass90533742022-01-22 05:03:50 -07001146 $(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL))
Simon Glassbc39e412022-01-31 07:49:38 -07001147 $(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI))
Simon Glass24f073d2021-12-16 20:59:37 -07001148 @# Check that this build does not override OF_HAS_PRIOR_STAGE by
1149 @# disabling OF_BOARD.
1150 $(call cmd,ofcheck,$(KCONFIG_CONFIG))
wdenk7ebf7442002-11-02 23:17:16 +00001151
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001152PHONY += dtbs
Masahiro Yamada4141e852016-06-23 13:53:46 +09001153dtbs: dts/dt.dtb
1154 @:
Tom Rini36dd5f12017-09-23 13:00:57 -04001155dts/dt.dtb: u-boot
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001156 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +00001157
Simon Glassad1ecd22016-01-31 18:10:50 -07001158quiet_cmd_copy = COPY $@
1159 cmd_copy = cp $< $@
1160
Jean-Jacques Hiblot11955592017-09-15 12:57:24 +02001161ifeq ($(CONFIG_MULTI_DTB_FIT),y)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001162
Marek Vasut95f4bbd2019-03-08 16:06:55 +01001163ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
1164FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
1165else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
1166FINAL_DTB_CONTAINER = fit-dtb.blob.gz
1167else
1168FINAL_DTB_CONTAINER = fit-dtb.blob
1169endif
1170
1171fit-dtb.blob.gz: fit-dtb.blob
1172 @gzip -kf9 $< > $@
1173
1174fit-dtb.blob.lzo: fit-dtb.blob
1175 @lzop -f9 $< > $@
1176
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001177fit-dtb.blob: dts/dt.dtb FORCE
1178 $(call if_changed,mkimage)
Vagrant Cascadian878e2a52019-05-02 11:14:12 -07001179ifneq ($(SOURCE_DATE_EPOCH),)
1180 touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
1181 chmod 0600 fit-dtb.blob
1182endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001183
1184MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1185 -a 0 -e 0 -E \
1186 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
1187
Michal Simek570c4632021-08-19 11:09:37 +02001188MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
1189
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301190ifneq ($(EXT_DTB),)
1191u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
1192 $(call if_changed,cat)
1193else
Tom Rini748198c2019-05-19 18:09:05 -04001194u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001195 $(call if_changed,cat)
Michal Simekc8c5e2b2019-03-23 11:13:00 +05301196endif
Cooper Jr., Franklin6f59fb02017-06-16 17:25:13 -05001197
1198u-boot.bin: u-boot-fit-dtb.bin FORCE
1199 $(call if_changed,copy)
Heiko Schocher16c776d2019-05-28 13:44:31 +02001200
Pali Rohár5af42ea2022-08-03 13:24:42 +02001201ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
Heiko Schocher12ae7bc2023-01-24 18:06:50 +01001202u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
1203 $(call if_changed,cat)
Pali Rohárd8fa0a72022-08-01 17:42:20 +02001204endif
1205
Heiko Schocher12ae7bc2023-01-24 18:06:50 +01001206else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
1207
1208ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
1209u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
1210 $(call if_changed,cat)
1211endif
1212
1213u-boot.bin: u-boot-dtb.bin FORCE
1214 $(call if_changed,copy)
1215
1216else
Simon Glassad1ecd22016-01-31 18:10:50 -07001217u-boot.bin: u-boot-nodtb.bin FORCE
1218 $(call if_changed,copy)
1219endif
1220
Heiko Schocher0f282c12019-10-25 14:46:54 +02001221# we call Makefile in arch/arm/mach-imx which
1222# has targets which are dependent on targets defined
1223# here. make could not resolve them and we must ensure
1224# that they are finished before calling imx targets
1225ifeq ($(CONFIG_MULTI_DTB_FIT),y)
1226IMX_DEPS = u-boot-fit-dtb.bin
1227endif
1228
1229%.imx: $(IMX_DEPS) %.bin
Stefano Babic552a8482017-06-29 10:16:06 +02001230 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Heinrich Schuchardt219dee72019-04-02 19:19:05 +02001231 $(BOARD_SIZE_CHECK)
Stefano Babice64348f2014-03-31 09:50:35 +02001232
Albert ARIBAUD \(3ADEV\)ed0c2c02016-09-26 09:08:06 +02001233%.vyb: %.imx
1234 $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
1235
1236quiet_cmd_copy = COPY $@
1237 cmd_copy = cp $< $@
1238
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +09001239u-boot.dtb: dts/dt.dtb
1240 $(call cmd,copy)
1241
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001242OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +00001243
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001244OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +00001245
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001246u-boot.hex u-boot.srec: u-boot FORCE
1247 $(call if_changed,objcopy)
1248
Masaru Nagai341ca902015-08-28 12:12:45 +09001249OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
1250
1251u-boot-elf.srec: u-boot.elf FORCE
1252 $(call if_changed,objcopy)
1253
Marek Vasut3ee58ea2018-02-26 20:14:02 +01001254OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
1255
1256spl/u-boot-spl.srec: spl/u-boot-spl FORCE
1257 $(call if_changed,objcopy)
1258
Marek Vasut56023302018-10-03 12:44:13 +02001259%.scif: %.srec
1260 $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
1261
Simon Glassad1ecd22016-01-31 18:10:50 -07001262OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
Jagdish Gediya96699f02018-09-03 21:35:10 +05301263 $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
Pali Roháre507be92022-08-03 23:56:55 +02001264 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),$(if $(CONFIG_OF_SEPARATE),-R .bootpg -R .resetvec))
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001265
Simon Glassad1ecd22016-01-31 18:10:50 -07001266binary_size_check: u-boot-nodtb.bin FORCE
1267 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001268 map_size=$(shell cat u-boot.map | \
Simon Glass0b308f12014-06-18 00:10:15 -06001269 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001270 | sed 's/0X//g' \
Simon Glass0b308f12014-06-18 00:10:15 -06001271 | bc); \
Simon Glass89742922014-06-02 22:04:47 -06001272 if [ "" != "$$map_size" ]; then \
1273 if test $$map_size -ne $$file_size; then \
Chris Packham3ce7a4f2014-07-24 17:27:07 +12001274 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
Simon Glassad1ecd22016-01-31 18:10:50 -07001275 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
Simon Glass89742922014-06-02 22:04:47 -06001276 exit 1; \
Angelo Dureghello51301022021-11-05 16:20:24 +01001277 fi; \
Simon Glass89742922014-06-02 22:04:47 -06001278 fi
1279
AKASHI Takahirodde1b752020-03-10 09:20:43 +09001280ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
Stephen Warren5fed97a2018-01-09 12:52:14 -07001281ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
1282subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
1283else
1284subtract_sys_malloc_f_len = true
1285endif
1286# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
1287# so low that the DTB could probably use 90%+ of the available space, for
1288# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
1289# safe for now and tweak this later if space becomes tight.
1290# A rejected alternative would be to check that some absolute minimum stack
1291# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
1292# deliberately build-specific, to take account of build-to-build stack usage
1293# differences due to different feature sets, there is no common absolute value
1294# to check against.
1295init_sp_bss_offset_check: u-boot.dtb FORCE
1296 @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
1297 space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
1298 $(subtract_sys_malloc_f_len) ; \
1299 quarter_space=$$(($${space} / 4)) ; \
1300 if [ $${dtb_size} -gt $${quarter_space} ]; then \
1301 echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
1302 echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
1303 exit 1 ; \
1304 fi
1305endif
1306
Pali Rohár71d3fa72020-11-04 10:34:35 +01001307shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
Pali Rohárae897022020-10-07 15:39:40 +02001308
1309quiet_cmd_objcopy_uboot = OBJCOPY $@
Pali Roháre9ebc172020-11-04 15:33:44 +01001310ifdef cmd_static_rela
Simon Glass98463902022-10-20 18:22:39 -06001311cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_TEXT_BASE)) || { rm -f $@; false; }
Pali Roháre9ebc172020-11-04 15:33:44 +01001312else
1313cmd_objcopy_uboot = $(cmd_objcopy)
1314endif
Pali Rohárae897022020-10-07 15:39:40 +02001315
Simon Glassad1ecd22016-01-31 18:10:50 -07001316u-boot-nodtb.bin: u-boot FORCE
Pali Rohárae897022020-10-07 15:39:40 +02001317 $(call if_changed,objcopy_uboot)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001318 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +00001319
Masahiro Yamada9e414032014-02-04 17:24:24 +09001320u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -04001321 $(CREATE_LDR_ENV)
Sonic Zhang240182d2014-08-12 18:45:26 +08001322 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -04001323 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001324
Simon Glass17a944b2016-11-25 20:15:57 -07001325# binman
1326# ---------------------------------------------------------------------------
Simon Glassa3c00552018-11-06 15:21:31 -07001327# Use 'make BINMAN_DEBUG=1' to enable debugging
Simon Glassef108042021-02-06 09:57:28 -07001328# Use 'make BINMAN_VERBOSE=3' to set vebosity level
Simon Glassc0f1ebe2020-09-06 10:39:08 -06001329default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
Simon Glasscfee2b22021-03-18 20:25:08 +13001330
Simon Glass17a944b2016-11-25 20:15:57 -07001331quiet_cmd_binman = BINMAN $@
Stephen Warren4f4fb852019-07-19 11:21:17 -06001332cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
Simon Glass79450772021-11-23 21:09:48 -07001333 $(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \
Simon Glass8fce3f22019-09-25 08:11:10 -06001334 --toolpath $(objtree)/tools \
Simon Glass1f338e02019-09-25 08:11:11 -06001335 $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
Tom Rinib144b932022-11-09 19:14:50 -07001336 build -u -d u-boot.dtb -O . -m \
Jonas Karlman491f90e2023-07-18 20:34:40 +00001337 --allow-missing $(if $(BINMAN_ALLOW_MISSING),--ignore-missing) \
Simon Glassa3c00552018-11-06 15:21:31 -07001338 -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
Simon Glasscfa3db62020-09-01 05:14:01 -06001339 -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
Simon Glass79450772021-11-23 21:09:48 -07001340 $(foreach f,$(BINMAN_INDIRS),-I $(f)) \
Simon Glasscfa3db62020-09-01 05:14:01 -06001341 -a atf-bl31-path=${BL31} \
Roger Quadros47f420a2022-02-19 20:50:04 +02001342 -a tee-os-path=${TEE} \
Bin Meng73c2a8f2021-05-10 20:23:34 +08001343 -a opensbi-path=${OPENSBI} \
Simon Glassc0f1ebe2020-09-06 10:39:08 -06001344 -a default-dt=$(default_dt) \
Samuel Holland18bd4552020-10-21 21:12:15 -05001345 -a scp-path=$(SCP) \
Jonas Karlman4773e9d2023-02-25 19:01:34 +00001346 -a rockchip-tpl-path=$(ROCKCHIP_TPL) \
Simon Glasscfee2b22021-03-18 20:25:08 +13001347 -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
1348 -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
Simon Glassf99cbe42021-08-07 07:24:07 -06001349 -a spl-dtb=$(CONFIG_SPL_OF_REAL) \
Simon Glassebee2062021-10-31 19:17:03 -06001350 -a tpl-dtb=$(CONFIG_TPL_OF_REAL) \
Philippe Reynesd12c1be2022-03-28 22:57:03 +02001351 -a pre-load-key-path=${PRE_LOAD_KEY_PATH} \
Stephen Warren4f4fb852019-07-19 11:21:17 -06001352 $(BINMAN_$(@F))
Simon Glass17a944b2016-11-25 20:15:57 -07001353
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001354OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -05001355
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001356OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
1357
1358u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
1359 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -05001360
Stefan Roeseb40bda62012-08-16 17:54:52 +02001361#
1362# U-Boot entry point, needed for booting of full-blown U-Boot
1363# from the SPL U-Boot version.
1364#
Tom Rini65cc0e22022-11-16 13:10:41 -05001365ifndef CFG_SYS_UBOOT_START
1366CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
Stefan Roeseb40bda62012-08-16 17:54:52 +02001367endif
1368
Michal Simekfc8db752019-10-02 15:53:12 +02001369# Boards with more complex image requirements can provide an .its source file
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001370# or a generator script
Simon Glassf4a43d22020-07-19 13:56:11 -06001371# NOTE: Please do not use this. We are migrating away from Makefile rules to use
1372# binman instead.
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001373ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
Patrick Delaunay0015e6d2020-04-23 09:39:08 +02001374U_BOOT_ITS := u-boot.its
1375$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
1376 $(call if_changed,copy)
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001377else
Simon Glassa8f3ace2020-07-19 13:56:10 -06001378ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001379U_BOOT_ITS := u-boot.its
Andreas Färberc29c1e62018-06-03 07:23:58 +02001380$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001381 $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
1382 $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
1383endif
1384endif
1385
Simon Glasscdf17242016-02-22 22:55:57 -07001386ifdef CONFIG_SPL_LOAD_FIT
1387MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
Tom Rini65cc0e22022-11-16 13:10:41 -05001388 -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
Sjoerd Simons80cc9512019-06-18 22:13:20 +02001389 -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
Simon Glasscdf17242016-02-22 22:55:57 -07001390 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
Klaus Heinrich Kiwi4e040b42021-02-09 15:41:55 -03001391 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
Jean-Jacques Hiblot557bc972019-10-22 16:39:21 +02001392 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
1393 $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
Simon Glasscdf17242016-02-22 22:55:57 -07001394else
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001395MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
Tom Rini65cc0e22022-11-16 13:10:41 -05001396 -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001397 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001398MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
Tom Rini65cc0e22022-11-16 13:10:41 -05001399 -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001400 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Sven Ebenfeld1f6a6642016-11-06 16:37:58 +01001401u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
Simon Glasscdf17242016-02-22 22:55:57 -07001402endif
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001403
Simon Glassdae6e7b2016-01-31 18:10:54 -07001404MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
1405
Bin Meng6cdd1772019-10-28 07:25:01 -07001406# Some boards have the kwbimage.cfg file written in advance, while some
1407# other boards generate it on the fly during the build in the build tree.
1408# Let's check if the file exists in the build tree first, otherwise we
1409# fall back to use the one in the source tree.
1410KWD_CONFIG_FILE = $(shell \
1411 if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
1412 echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
1413 else \
1414 echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
1415 fi)
1416
1417MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
Simon Glass98463902022-10-20 18:22:39 -06001418 -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001419
Pali Rohár87ac4b42022-11-02 18:51:28 +01001420MKIMAGEFLAGS_u-boot-with-spl.kwb = -n $(KWD_CONFIG_FILE) \
Simon Glass98463902022-10-20 18:22:39 -06001421 -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
Mario Sixa1b6b0a2017-01-11 16:01:00 +01001422 $(if $(KEYDIR),-k $(KEYDIR))
Stefan Roesea90ffb52015-01-19 11:33:45 +01001423
Masahiro Yamadae4536f82014-03-11 11:05:16 +09001424MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Hou Zhiqiang20589672022-02-17 11:51:36 +08001425 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -A $(ARCH) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001426
Hou Zhiqiangbcda5b02019-08-20 09:35:23 +00001427UBOOT_BIN := u-boot.bin
Hou Zhiqiangbcda5b02019-08-20 09:35:23 +00001428
Weijie Gaoa38f84b2020-04-21 09:28:39 +02001429MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
Tom Rini65cc0e22022-11-16 13:10:41 -05001430 -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
Weijie Gaoa38f84b2020-04-21 09:28:39 +02001431 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1432
1433u-boot.bin.lzma: u-boot.bin FORCE
1434 $(call if_changed,lzma)
1435
1436u-boot-lzma.img: u-boot.bin.lzma FORCE
1437 $(call if_changed,mkimage)
1438
Sven Ebenfeldd21bd692016-11-06 16:37:56 +01001439u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
Lukas Auer2c768612019-08-21 21:14:41 +02001440 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
Simon Glass8e076812021-12-16 20:59:22 -07001441 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
Tom Rinie4b8dd92019-08-27 07:11:37 -04001442 ,$(UBOOT_BIN)) FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001443 $(call if_changed,mkimage)
Simon Goldschmidt45297e22019-01-11 20:56:02 +01001444 $(BOARD_SIZE_CHECK)
wdenkbdccc4f2003-08-05 17:43:17 +00001445
Marek Vasut7a778362019-03-06 22:04:00 +01001446ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
1447MKIMAGEFLAGS_u-boot.itb =
1448else
1449MKIMAGEFLAGS_u-boot.itb = -E
1450endif
Michal Simek570c4632021-08-19 11:09:37 +02001451MKIMAGEFLAGS_u-boot.itb += -B 0x8
Marek Vasut7a778362019-03-06 22:04:00 +01001452
Samuel Holland509978e2020-10-21 21:12:08 -05001453ifdef U_BOOT_ITS
Lukas Auer2c768612019-08-21 21:14:41 +02001454u-boot.itb: u-boot-nodtb.bin \
Ilias Apalodimase7fb7892021-10-26 09:12:33 +03001455 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
Neal Frager537ca0b2022-12-21 07:54:46 +00001456 $(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \
Lukas Auer2c768612019-08-21 21:14:41 +02001457 $(U_BOOT_ITS) FORCE
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001458 $(call if_changed,mkfitimage)
Maxime Riparde89f5591f2018-01-16 09:44:23 +01001459 $(BOARD_SIZE_CHECK)
Samuel Holland509978e2020-10-21 21:12:08 -05001460endif
Andre Przywara1a12fdc2017-04-26 01:32:45 +01001461
Pali Rohár87ac4b42022-11-02 18:51:28 +01001462u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
Stefan Roesea90ffb52015-01-19 11:33:45 +01001463 $(call if_changed,mkimage)
Pali Rohárd285e4b2022-09-14 15:06:14 +02001464 $(BOARD_SIZE_CHECK)
Stefan Roesea90ffb52015-01-19 11:33:45 +01001465
Masahiro Yamada9e414032014-02-04 17:24:24 +09001466u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +00001467 $(OBJDUMP) -d $< > $@
1468
York Sun7550dbe2018-06-14 14:38:48 -07001469ifneq ($(CONFIG_SPL_PAYLOAD),)
1470SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001471else
Masahiro Yamada9e414032014-02-04 17:24:24 +09001472SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +08001473endif
Scott Wood74752ba2012-12-06 13:33:16 +00001474
Stefan Roese9ea6f712019-04-03 15:24:50 +02001475SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
1476
Masahiro Yamada982a1192014-02-24 11:12:17 +09001477OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
1478 --pad-to=$(CONFIG_SPL_PAD_TO)
Stefan Roese9ea6f712019-04-03 15:24:50 +02001479u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
Masahiro Yamada982a1192014-02-24 11:12:17 +09001480 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +08001481
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001482ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001483MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
1484
1485lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
1486 $(call if_changed,mkimage)
1487
1488OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1489
Masahiro Yamada514ec432016-02-05 17:55:13 +09001490lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001491 $(call if_changed,objcopy)
1492
1493OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1494
Masahiro Yamada514ec432016-02-05 17:55:13 +09001495lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001496 $(call if_changed,objcopy)
1497
Masahiro Yamada514ec432016-02-05 17:55:13 +09001498lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001499 $(call if_changed,cat)
1500
Vladimir Zapolskiye3e08192018-09-17 21:43:04 +03001501endif
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +02001502
Masahiro Yamada982a1192014-02-24 11:12:17 +09001503OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
1504 --pad-to=$(CONFIG_TPL_PAD_TO)
1505tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
1506 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +00001507
Masahiro Yamada630d2342014-02-24 11:12:21 +09001508SPL: spl/u-boot-spl.bin FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001509 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Masahiro Yamada630d2342014-02-24 11:12:21 +09001510
Frieder Schrempfc3587192022-08-23 16:29:10 +02001511#ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
Peng Fan700315c2019-08-22 07:42:41 +00001512ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
1513u-boot.cnt: u-boot.bin FORCE
1514 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1515
1516flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
1517 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1518else
Marek Vasutbd9059c2021-02-25 21:50:59 +01001519ifeq ($(CONFIG_BINMAN),y)
1520flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
1521 $(call if_changed,binman)
Marek Vasutbd9059c2021-02-25 21:50:59 +01001522else
Peng Fan94df9882018-11-20 10:19:46 +00001523flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
1524 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1525endif
Peng Fan700315c2019-08-22 07:42:41 +00001526endif
Frieder Schrempfc3587192022-08-23 16:29:10 +02001527#endif
Peng Fan94df9882018-11-20 10:19:46 +00001528
Marek Vasut70344782021-03-01 16:41:28 +01001529u-boot.uim: u-boot.bin FORCE
1530 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1531
Luca Ceresoli95942f92023-03-10 11:07:52 +01001532u-boot-nand.imx: u-boot.imx FORCE
1533 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1534
Marek Vasut70344782021-03-01 16:41:28 +01001535u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
Stefano Babic552a8482017-06-29 10:16:06 +02001536 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +00001537
Simon Glass98463902022-10-20 18:22:39 -06001538MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +09001539
1540u-boot.ubl: u-boot-with-spl.bin FORCE
1541 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +00001542
Simon Glass718bd392023-02-01 13:19:17 -07001543MKIMAGEFLAGS_u-boot-spl.ais = -s -n "/dev/null" \
Masahiro Yamada982a1192014-02-24 11:12:17 +09001544 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1545spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1546 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +00001547
Christian Riesch532d5312014-05-07 10:16:28 +02001548OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +09001549u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1550 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +00001551
Marek Vasut1a9df132014-04-03 19:12:21 +02001552u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1553 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +09001554u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +09001555 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +00001556
Masahiro Yamada982a1192014-02-24 11:12:17 +09001557MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1558 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1559spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1560 $(call if_changed,mkimage)
1561
Marek Vasut333b7202015-07-15 02:53:45 +02001562ifneq ($(CONFIG_ARCH_SOCFPGA),)
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001563quiet_cmd_gensplx4 = GENSPLX4 $@
Ley Foon Tan40551cf2021-01-13 18:53:05 +08001564cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
1565 --pad-to=$(CONFIG_SPL_PAD_TO) \
1566 spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
1567 cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
Pali Rohár4532bf42020-10-26 14:10:49 +01001568 spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001569spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
1570 $(call if_changed,gensplx4)
1571
Marek Vasut333b7202015-07-15 02:53:45 +02001572quiet_cmd_socboot = SOCBOOT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001573cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001574u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
Marek Vasut333b7202015-07-15 02:53:45 +02001575 $(call if_changed,socboot)
Marek Vasut533832c2019-11-20 22:36:45 +01001576
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001577quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
1578cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
Marek Vasut533832c2019-11-20 22:36:45 +01001579 cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
1580 spl/u-boot-spl.sfp spl/u-boot-spl.pad \
1581 spl/u-boot-spl.sfp spl/u-boot-spl.pad \
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001582 spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
Pali Rohár4532bf42020-10-26 14:10:49 +01001583 { rm -f $@ spl/u-boot-spl.pad; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001584u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
1585 $(call if_changed,gensplpadx4)
1586
1587quiet_cmd_socnandboot = SOCNANDBOOT $@
Pali Rohár4532bf42020-10-26 14:10:49 +01001588cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
Chee Hong Ang505dc1c2020-08-11 21:52:30 +08001589u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
Marek Vasut533832c2019-11-20 22:36:45 +01001590 $(call if_changed,socnandboot)
1591
Marek Vasut333b7202015-07-15 02:53:45 +02001592endif
1593
Pali Rohár5af42ea2022-08-03 13:24:42 +02001594ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
Heiko Schocher12ae7bc2023-01-24 18:06:50 +01001595u-boot-dtb.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
Jagdish Gediya96699f02018-09-03 21:35:10 +05301596 $(call if_changed,binman)
1597
Jagdish Gediya96699f02018-09-03 21:35:10 +05301598OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
1599u-boot-br.bin: u-boot FORCE
1600 $(call if_changed,objcopy)
1601endif
Jagdish Gediya96699f02018-09-03 21:35:10 +05301602
Simon Glass0adf8d32016-03-11 22:07:16 -07001603quiet_cmd_ldr = LD $@
1604cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1605 $(filter-out FORCE,$^) -o $@
1606
Simon Glassbcd4e6f2020-07-19 13:55:52 -06001607ifdef CONFIG_X86
Simon Glass5e239182019-08-24 07:22:49 -06001608OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
1609u-boot-x86-start16.bin: u-boot FORCE
1610 $(call if_changed,objcopy)
1611
1612OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
1613u-boot-x86-reset16.bin: u-boot FORCE
Simon Glassfce7b272014-11-12 22:42:08 -07001614 $(call if_changed,objcopy)
Simon Glassaafe5c52020-07-19 13:55:54 -06001615
Simon Glass42b18df2020-07-19 13:56:03 -06001616endif # CONFIG_X86
Simon Glassbcd4e6f2020-07-19 13:55:52 -06001617
Simon Glass08aeb8b2015-08-04 12:33:43 -06001618OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1619u-boot-app.efi: u-boot FORCE
1620 $(call if_changed,zobjcopy)
1621
Simon Glass73c5c392016-01-31 18:10:55 -07001622u-boot.bin.o: u-boot.bin FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001623 $(call if_changed,efipayload)
1624
1625u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1626 $(call if_changed_dep,cpp_lds)
1627
1628# Rule to link the EFI payload which contains a stub and a U-Boot binary
1629quiet_cmd_u-boot_payload ?= LD $@
1630 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
Simon Glass96a8d402015-08-04 12:33:56 -06001631 -T u-boot-payload.lds arch/x86/cpu/call32.o \
Simon Glass73c5c392016-01-31 18:10:55 -07001632 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
Simon Glass2dcd4e92016-11-07 08:47:14 -07001633 $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
Simon Glass476476e2015-08-04 12:33:52 -06001634
Simon Glass73c5c392016-01-31 18:10:55 -07001635u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001636 $(call if_changed,u-boot_payload)
1637
1638OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1639u-boot-payload.efi: u-boot-payload FORCE
1640 $(call if_changed,zobjcopy)
1641
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001642u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1643 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +02001644
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301645#Add a target to create boot binary having SPL binary in PBI format
1646#concatenated with u-boot binary. It is need by PowerPC SoC having
1647#internal SRAM <= 512KB.
1648MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Alison Wang94cb17d2014-12-03 15:00:41 +08001649 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1650 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301651
1652spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1653 $(call if_changed,mkimage)
1654
Alison Wang45c2e482014-12-03 15:00:42 +08001655ifeq ($(ARCH),arm)
1656UBOOT_BINLOAD := u-boot.img
1657else
1658UBOOT_BINLOAD := u-boot.bin
1659endif
1660
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301661OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1662 --gap-fill=0xff
1663
Alison Wang45c2e482014-12-03 15:00:42 +08001664u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301665 $(call if_changed,pad_cat)
1666
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001667quiet_cmd_u-boot-elf ?= LD $@
1668 cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
Du Huanpeng21d3e3d2022-03-31 02:41:42 +08001669 $(if $(CONFIG_SYS_BIG_ENDIAN),-EB,-EL) \
Simon Glass98463902022-10-20 18:22:39 -06001670 -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_TEXT_BASE) \
1671 -Ttext=$(CONFIG_TEXT_BASE)
Michal Simeke14ba8a2020-03-30 13:58:59 +02001672u-boot.elf: u-boot.bin u-boot-elf.lds
Álvaro Fernández Rojase69945e2017-04-20 20:36:28 +02001673 $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
1674 $(call if_changed,u-boot-elf)
Scott Woodf4dc7142013-12-14 11:47:33 +08001675
Michal Simeke14ba8a2020-03-30 13:58:59 +02001676u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
1677 $(call if_changed_dep,cpp_lds)
1678
Ryder Lee3b975a12018-11-15 10:07:49 +08001679# MediaTek's ARM-based u-boot needs a header to contains its load address
1680# which is parsed by the BootROM.
1681# If the SPL build is enabled, the header will be added to the spl binary,
1682# and the spl binary and the u-boot.img will be combined into one file.
1683# Otherwise the header will be added to the u-boot.bin directly.
1684
1685ifeq ($(CONFIG_SPL),y)
1686spl/u-boot-spl-mtk.bin: spl/u-boot-spl
Weijie Gaof4f478b2021-03-05 10:39:55 +08001687
1688u-boot-mtk.bin: u-boot-with-spl.bin
1689 $(call if_changed,copy)
Ryder Lee3b975a12018-11-15 10:07:49 +08001690else
1691MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
Simon Glass98463902022-10-20 18:22:39 -06001692 -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
Ryder Lee3b975a12018-11-15 10:07:49 +08001693 -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
1694
1695u-boot-mtk.bin: u-boot.bin FORCE
1696 $(call if_changed,mkimage)
1697endif
1698
Daniel Schwierzeckb8cecd02020-06-06 22:21:47 +02001699quiet_cmd_endian_swap = SWAP $@
1700 cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
1701
1702u-boot-swap.bin: u-boot.bin FORCE
1703 $(call if_changed,endian_swap)
1704
Paul Burton09bebb82017-06-15 17:05:09 -07001705ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
1706
Marek Behúnc1094982021-05-20 13:24:03 +02001707# Generate linker list symbols references to force compiler to not optimize
1708# them away when compiling with LTO
Simon Glassa55014d2022-08-03 12:13:08 -06001709ifeq ($(LTO_ENABLE),y)
Marek Behúnc1094982021-05-20 13:24:03 +02001710u-boot-keep-syms-lto := keep-syms-lto.o
1711u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
1712
1713quiet_cmd_keep_syms_lto = KSL $@
1714 cmd_keep_syms_lto = \
Patrick Delaunayff7852d2021-07-21 09:56:07 +02001715 $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
Marek Behúnc1094982021-05-20 13:24:03 +02001716
1717quiet_cmd_keep_syms_lto_cc = KSLCC $@
1718 cmd_keep_syms_lto_cc = \
1719 $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
1720
1721$(u-boot-keep-syms-lto_c): $(u-boot-main)
1722 $(call if_changed,keep_syms_lto)
1723$(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
1724 $(call if_changed,keep_syms_lto_cc)
1725else
1726u-boot-keep-syms-lto :=
1727endif
1728
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001729# Rule to link u-boot
1730# May be overridden by arch/$(ARCH)/config.mk
Simon Glassa55014d2022-08-03 12:13:08 -06001731ifeq ($(LTO_ENABLE),y)
Marek Behúnc1094982021-05-20 13:24:03 +02001732quiet_cmd_u-boot__ ?= LTO $@
Wolfgang Denk0cf207e2021-09-27 17:42:39 +02001733 cmd_u-boot__ ?= \
Marek Behúnc1094982021-05-20 13:24:03 +02001734 $(CC) -nostdlib -nostartfiles \
1735 $(LTO_FINAL_LDFLAGS) $(c_flags) \
1736 $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
1737 -T u-boot.lds $(u-boot-init) \
1738 -Wl,--whole-archive \
1739 $(u-boot-main) \
1740 $(u-boot-keep-syms-lto) \
1741 $(PLATFORM_LIBS) \
1742 -Wl,--no-whole-archive \
1743 -Wl,-Map,u-boot.map; \
1744 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
1745else
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001746quiet_cmd_u-boot__ ?= LD $@
Marek Behún14458362021-05-20 13:24:01 +02001747 cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1748 -T u-boot.lds $(u-boot-init) \
Simon Glassce2f09b2022-01-04 03:51:17 -07001749 --whole-archive \
Marek Behún14458362021-05-20 13:24:01 +02001750 $(u-boot-main) \
Simon Glassce2f09b2022-01-04 03:51:17 -07001751 --no-whole-archive \
Marek Behún14458362021-05-20 13:24:01 +02001752 $(PLATFORM_LIBS) -Map u-boot.map; \
1753 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
Marek Behúnc1094982021-05-20 13:24:03 +02001754endif
Simon Glass86eb49b2011-10-03 19:26:50 +00001755
Vasili Galkacac8f382014-08-14 12:40:55 +03001756quiet_cmd_smap = GEN common/system_map.o
1757cmd_smap = \
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001758 smap=`$(call SYSTEM_MAP,u-boot) | \
1759 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1760 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1761 -c $(srctree)/common/system_map.c -o common/system_map.o
Vasili Galkacac8f382014-08-14 12:40:55 +03001762
Marek Behúnc1094982021-05-20 13:24:03 +02001763u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
Paul Burton09bebb82017-06-15 17:05:09 -07001764 +$(call if_changed,u-boot__)
Vasili Galkacac8f382014-08-14 12:40:55 +03001765ifeq ($(CONFIG_KALLSYMS),y)
1766 $(call cmd,smap)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001767 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001768endif
wdenk7ebf7442002-11-02 23:17:16 +00001769
Rick Chen42ac26f2017-12-26 13:55:56 +08001770ifeq ($(CONFIG_RISCV),y)
Bin Mengd7abc0f2023-04-13 14:20:04 +08001771 @tools/prelink-riscv $@
Rick Chen42ac26f2017-12-26 13:55:56 +08001772endif
1773
Stephen Warren7ed48482016-02-08 14:44:15 -07001774quiet_cmd_sym ?= SYM $@
1775 cmd_sym ?= $(OBJDUMP) -t $< > $@
1776u-boot.sym: u-boot FORCE
1777 $(call if_changed,sym)
1778
Simon Glass86b9c3e2021-10-21 21:08:46 -06001779# Environment processing
1780# ---------------------------------------------------------------------------
1781
1782# Directory where we expect the .env file, if it exists
1783ENV_DIR := $(srctree)/board/$(BOARDDIR)
1784
1785# Basename of .env file, stripping quotes
1786ENV_SOURCE_FILE := $(CONFIG_ENV_SOURCE_FILE:"%"=%)
1787
1788# Filename of .env file
1789ENV_FILE_CFG := $(ENV_DIR)/$(ENV_SOURCE_FILE).env
1790
1791# Default filename, if CONFIG_ENV_SOURCE_FILE is empty
1792ENV_FILE_BOARD := $(ENV_DIR)/$(CONFIG_SYS_BOARD:"%"=%).env
1793
1794# Select between the CONFIG_ENV_SOURCE_FILE and the default one
1795ENV_FILE := $(if $(ENV_SOURCE_FILE),$(ENV_FILE_CFG),$(wildcard $(ENV_FILE_BOARD)))
1796
1797# Run the environment text file through the preprocessor, but only if it is
1798# non-empty, to save time and possible build errors if something is wonky with
Simon Glassf432eb62022-03-11 22:37:23 -07001799# the board.
1800# If there is no ENV_FILE, produce an empty output file, to prevent a previous
1801# build's file being used in the case of in-tree builds.
Simon Glass86b9c3e2021-10-21 21:08:46 -06001802quiet_cmd_gen_envp = ENVP $@
1803 cmd_gen_envp = \
1804 if [ -s "$(ENV_FILE)" ]; then \
1805 $(CPP) -P $(CFLAGS) -x assembler-with-cpp -D__ASSEMBLY__ \
1806 -D__UBOOT_CONFIG__ \
1807 -I . -I include -I $(srctree)/include \
1808 -include linux/kconfig.h -include include/config.h \
1809 -I$(srctree)/arch/$(ARCH)/include \
1810 $< -o $@; \
1811 else \
Andrey Zhizhikine75c5b92022-04-03 16:06:03 +02001812 rm -f $@; \
qthedev42db3732022-02-05 10:25:16 +00001813 touch $@ ; \
Simon Glass86b9c3e2021-10-21 21:08:46 -06001814 fi
Simon Glass36fc8322023-04-29 19:21:45 -06001815include/generated/env.in: include/generated/env.txt
Simon Glass86b9c3e2021-10-21 21:08:46 -06001816 $(call cmd,gen_envp)
1817
1818# Regenerate the environment if it changes
1819# We use 'wildcard' since the file is not required to exist (at present), in
1820# which case we don't want this dependency, but instead should create an empty
1821# file
1822# This rule is useful since it shows the source file for the environment
1823quiet_cmd_envc = ENVC $@
1824 cmd_envc = \
1825 if [ -f "$<" ]; then \
1826 cat $< > $@; \
1827 elif [ -n "$(ENV_SOURCE_FILE)" ]; then \
1828 echo "Missing file $(ENV_FILE_CFG)"; \
1829 else \
qthedev42db3732022-02-05 10:25:16 +00001830 touch $@ ; \
Simon Glass86b9c3e2021-10-21 21:08:46 -06001831 fi
1832
Simon Glass36fc8322023-04-29 19:21:45 -06001833include/generated/env.txt: $(wildcard $(ENV_FILE))
Simon Glass86b9c3e2021-10-21 21:08:46 -06001834 $(call cmd,envc)
1835
1836# Write out the resulting environment, converted to a C string
1837quiet_cmd_gen_envt = ENVT $@
1838 cmd_gen_envt = \
1839 awk -f $(srctree)/scripts/env2string.awk $< >$@
1840$(env_h): include/generated/env.in
1841 $(call cmd,gen_envt)
1842
1843# ---------------------------------------------------------------------------
1844
Michal Simek69c0d322014-04-24 15:24:28 +02001845# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001846# make sure no implicit rule kicks in
1847$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +02001848
Thomas Hebb32f2ca22019-11-13 18:18:03 -08001849# Handle descending into subdirectories listed in $(u-boot-dirs)
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001850# Preset locale variables to speed up the build process. Limit locale
1851# tweaks to this spot to avoid wrong language settings when running
1852# make menuconfig etc.
1853# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001854
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001855PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001856$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001857 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001858
Masahiro Yamada74241452014-02-24 11:12:09 +09001859tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001860# The "tools" are needed early
1861$(filter-out tools, $(u-boot-dirs)): tools
1862# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1863# is "yes"), so compile examples after U-Boot is compiled.
1864examples: $(filter-out examples, $(u-boot-dirs))
1865
Masahiro Yamada74241452014-02-24 11:12:09 +09001866define filechk_uboot.release
1867 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1868endef
1869
1870# Store (new) UBOOTRELEASE string in include/config/uboot.release
Masahiro Yamada51148792014-07-30 14:08:17 +09001871include/config/uboot.release: include/config/auto.conf FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001872 $(call filechk,uboot.release)
1873
1874
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001875# Things we need to do before we recursively start building the kernel
1876# or the modules are listed in "prepare".
1877# A multi level approach is used. prepareN is processed before prepareN-1.
1878# archprepare is used in arch Makefiles and when processed asm symlink,
1879# version.h and scripts_basic is processed / created.
1880
1881# Listed in dependency order
1882PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1883
1884# prepare3 is used to check if we are building in a separate output directory,
1885# and if so do:
1886# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001887prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001888ifneq ($(KBUILD_SRC),)
Masahiro Yamada51148792014-07-30 14:08:17 +09001889 @$(kecho) ' Using $(srctree) as source for U-Boot'
1890 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001891 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1892 echo >&2 " in the '$(srctree)' directory.";\
1893 /bin/false; \
1894 fi;
1895endif
1896
1897# prepare2 creates a makefile if using a separate output directory
Masahiro Yamada0b588de2019-01-10 23:11:39 +09001898prepare2: prepare3 outputmakefile cfg
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001899
Simon Glass86b9c3e2021-10-21 21:08:46 -06001900prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) $(env_h) \
Masahiro Yamada51148792014-07-30 14:08:17 +09001901 include/config/auto.conf
Masahiro Yamada4a377552014-02-25 19:26:48 +09001902ifeq ($(wildcard $(LDSCRIPT)),)
1903 @echo >&2 " Could not find linker script."
1904 @/bin/false
1905endif
wdenk7ebf7442002-11-02 23:17:16 +00001906
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001907ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
1908prepare1: $(defaultenv_h)
Joel Stanley2a2896b2021-06-18 11:35:59 +09301909
1910envtools: $(defaultenv_h)
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001911endif
1912
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001913archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001914
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001915prepare0: archprepare FORCE
1916 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001917
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001918# All the preparing..
1919prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001920
Masahiro Yamada74241452014-02-24 11:12:09 +09001921# Generate some files
1922# ---------------------------------------------------------------------------
1923
Simon Glass68f6a902021-02-04 21:17:13 -07001924# Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
Masahiro Yamada74241452014-02-24 11:12:09 +09001925define filechk_version.h
1926 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1927 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
Simon Glass68f6a902021-02-04 21:17:13 -07001928 echo \#define U_BOOT_VERSION_NUM $(VERSION); \
1929 echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
1930 sed -e "s/^0*//"); \
Vagrant Cascadian42ffa512016-06-12 06:07:07 -07001931 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1932 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
Masahiro Yamada74241452014-02-24 11:12:09 +09001933endef
1934
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001935# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1936# The BSD date on the other hand behaves different and would produce errors
1937# with the misused '-d' switch. Respect that and search a working date with
1938# well known pre- and suffixes for the GNU variant of date.
Masahiro Yamada74241452014-02-24 11:12:09 +09001939define filechk_timestamp.h
Chris Packham70d39f52015-08-13 18:08:27 +12001940 (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1941 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001942 DATE=""; \
1943 for date in gdate date.gnu date; do \
1944 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1945 done; \
1946 if test -n "$${DATE}"; then \
1947 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1948 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1949 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
Heinrich Schuchardtcbf0ffe2020-10-25 07:25:05 +01001950 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001951 else \
1952 return 42; \
1953 fi; \
Chris Packham70d39f52015-08-13 18:08:27 +12001954 else \
1955 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1956 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1957 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
Heinrich Schuchardtcbf0ffe2020-10-25 07:25:05 +01001958 LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
Chris Packham70d39f52015-08-13 18:08:27 +12001959 fi)
Masahiro Yamada74241452014-02-24 11:12:09 +09001960endef
1961
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001962define filechk_defaultenv.h
Rasmus Villemoes7ac70382021-04-22 09:44:18 +02001963 ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001964 tr '\n' '\0' | \
Samuel Mescoff4b7f5f32019-04-15 12:28:26 +02001965 sed -e 's/\\\x0\s*//g' | \
Rasmus Villemoes7ac70382021-04-22 09:44:18 +02001966 xxd -i ; )
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001967endef
1968
Michal Simekdacec832020-02-18 15:03:13 +01001969define filechk_dt.h
1970 (if test -n "$${DEVICE_TREE}"; then \
1971 echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
1972 else \
1973 echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
1974 fi)
1975endef
1976
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09001977$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001978 $(call filechk,version.h)
1979
1980$(timestamp_h): $(srctree)/Makefile FORCE
1981 $(call filechk,timestamp.h)
1982
Michal Simekdacec832020-02-18 15:03:13 +01001983$(dt_h): $(srctree)/Makefile FORCE
1984 $(call filechk,dt.h)
1985
Rasmus Villemoesf3d8f7d2018-03-20 11:38:45 +01001986$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
1987 $(call filechk,defaultenv.h)
1988
Masahiro Yamada63780082014-02-24 11:12:10 +09001989# ---------------------------------------------------------------------------
Tom Rini473fc272021-06-17 18:07:25 -04001990# Devicetree files
1991
1992ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
1993dtstree := arch/$(SRCARCH)/boot/dts
1994endif
1995
1996ifneq ($(dtstree),)
1997
1998%.dtb: prepare3 scripts_dtc
1999 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
2000
2001PHONY += dtbs dtbs_install
2002dtbs: prepare3 scripts_dtc
2003 $(Q)$(MAKE) $(build)=$(dtstree)
2004
2005dtbs_install:
2006 $(Q)$(MAKE) $(dtbinst)=$(dtstree)
2007
Tom Rini473fc272021-06-17 18:07:25 -04002008endif
2009
Simon Glass93b19652021-09-22 11:34:44 -06002010# Check dtc and pylibfdt, if DTC is provided, else build them
Tom Rini473fc272021-06-17 18:07:25 -04002011PHONY += scripts_dtc
2012scripts_dtc: scripts_basic
Simon Glass93b19652021-09-22 11:34:44 -06002013 $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
2014 $(MAKE) $(build)=scripts/dtc; \
2015 else \
2016 if ! $(DTC) -v >/dev/null; then \
2017 echo '*** Failed to check dtc version: $(DTC)'; \
2018 false; \
2019 else \
2020 if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
2021 echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
2022 false; \
2023 else \
2024 if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
2025 if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
2026 echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
2027 false; \
2028 fi; \
2029 fi; \
2030 fi; \
2031 fi; \
2032 fi
Tom Rini473fc272021-06-17 18:07:25 -04002033
2034# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09002035quiet_cmd_cpp_lds = LDS $@
Chris Zankelde5e5ce2016-08-10 18:36:43 +03002036cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
Simon Glass44093a12018-10-01 12:22:43 -06002037 -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09002038
Masahiro Yamada04a34c92014-02-24 11:12:19 +09002039u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09002040 $(call if_changed_dep,cpp_lds)
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02002041
Masahiro Yamada982a1192014-02-24 11:12:17 +09002042spl/u-boot-spl.bin: spl/u-boot-spl
2043 @:
Heinrich Schuchardt0a0f2312019-04-02 19:19:06 +02002044 $(SPL_SIZE_CHECK)
2045
Dalon Westergreen9773ebc2021-03-01 20:04:16 +08002046spl/u-boot-spl-dtb.bin: spl/u-boot-spl
2047 @:
2048
2049spl/u-boot-spl-dtb.hex: spl/u-boot-spl
2050 @:
2051
Simon Glass70bed2f2022-04-30 00:56:50 -06002052spl/u-boot-spl: tools prepare $(if $(CONFIG_SPL_OF_CONTROL),dts/dt.dtb)
Masahiro Yamadac7163082014-06-09 15:14:11 +09002053 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00002054
Ian Campbell50827a52014-05-05 11:52:30 +01002055spl/sunxi-spl.bin: spl/u-boot-spl
2056 @:
2057
Maxime Ripardd2fdcc72017-02-27 18:22:13 +01002058spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
2059 @:
2060
Simon Glassbd7dc382016-01-31 18:10:53 -07002061spl/u-boot-spl.sfp: spl/u-boot-spl
Marek Vasut333b7202015-07-15 02:53:45 +02002062 @:
2063
Nathan Rossi08598d62015-11-17 22:56:57 +10002064spl/boot.bin: spl/u-boot-spl
2065 @:
2066
Simon Glassd3eba952022-04-30 00:56:51 -06002067tpl/u-boot-tpl.bin: tpl/u-boot-tpl
2068 @:
Simon Glassc52b5e82019-10-20 21:31:52 -06002069 $(TPL_SIZE_CHECK)
Ying Zhang3aa29de2013-08-16 15:16:15 +08002070
Simon Glassd3eba952022-04-30 00:56:51 -06002071tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
2072 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
2073
Simon Glassf86ca5a2022-04-30 00:56:52 -06002074vpl/u-boot-vpl.bin: vpl/u-boot-vpl
2075 @:
2076 $(VPL_SIZE_CHECK)
2077
2078vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
2079 $(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.spl all
2080
Igor Grinberg8d819ab2014-07-15 15:52:00 +03002081TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01002082
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00002083FIND := find
2084FINDFLAGS := -L
2085
Marian Balakowiczf9328632006-09-01 19:49:50 +02002086tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09002087 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08002088 -name '*.[chS]' -print`
Du Huanpeng74d339b2015-05-04 06:26:53 -07002089 ln -s ctags tags
wdenk7ebf7442002-11-02 23:17:16 +00002090
2091etags:
Igor Grinberg8d819ab2014-07-15 15:52:00 +03002092 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08002093 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08002094cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00002095 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
2096 cscope.files
Andy Shevchenkoe15a9512019-10-08 21:12:45 +03002097 @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
2098 grep -xvf - cscope.files > cscope.files.no-symlinks; \
2099 mv cscope.files.no-symlinks cscope.files
Li Yangffda5862008-02-29 11:46:05 +08002100 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00002101
Mike Frysingerecb1dc82009-05-20 04:35:14 -04002102SYSTEM_MAP = \
2103 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00002104 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04002105 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09002106System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09002107 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00002108
2109#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00002110
Scott Wood54799e42013-12-14 11:47:34 +08002111# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
2112# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09002113checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08002114 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
2115 grep R_A | sort -u`"; \
2116 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
2117 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
2118 echo "$< contains unexpected relocations: $$RELOC"; \
2119 false; \
2120 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02002121
Bin Meng4d90f6c2019-10-27 05:19:47 -07002122tools/version.h: include/version.h
Tom Rinifb013ee2019-12-04 18:54:30 -05002123 $(Q)mkdir -p $(dir $@)
Bin Meng4d90f6c2019-10-27 05:19:47 -07002124 $(call if_changed,copy)
2125
Christophe Leroy40b77f22023-05-11 08:16:49 +02002126envtools: u-boot-initial-env scripts_basic $(version_h) $(timestamp_h) tools/version.h
Tom Rini2d3229b2017-09-05 14:01:29 -04002127 $(Q)$(MAKE) $(build)=tools/env
Mike Frysinger0358df42010-08-15 00:03:21 -04002128
Simon Goldschmidt25770152019-05-24 22:07:04 +02002129tools-only: export TOOLS_ONLY=y
Bin Meng4d90f6c2019-10-27 05:19:47 -07002130tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
Masahiro Yamada4642e002014-03-31 17:33:51 +09002131 $(Q)$(MAKE) $(build)=tools
2132
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09002133tools-all: export HOST_TOOLS_ALL=y
Simon Glass57332952017-09-05 01:53:58 -06002134tools-all: envtools tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04002135
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09002136cross_tools: export CROSS_BUILD_TOOLS=y
2137cross_tools: tools ;
2138
Wolfgang Denk4e53a252006-10-25 00:43:17 +02002139.PHONY : CHANGELOG
2140CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04002141 git log --no-merges U-Boot-1_1_5.. | \
2142 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02002143
wdenk7ebf7442002-11-02 23:17:16 +00002144#########################################################################
2145
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002146###
2147# Cleaning is done on three levels.
2148# make clean Delete most generated files
2149# Leave enough to build external modules
2150# make mrproper Delete the current configuration, and all generated files
2151# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00002152
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002153# Directories & files removed with 'make clean'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002154CLEAN_DIRS += $(MODVERDIR) \
Tobias Deiminger45e636f2023-06-20 00:41:04 +02002155 $(foreach d, spl tpl vpl, $(patsubst %,$d/%, \
Masahiro Yamada51148792014-07-30 14:08:17 +09002156 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002157
Heinrich Schuchardt0652d442022-03-19 13:33:25 +01002158CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
Tom Rini07b96422022-06-13 22:57:31 -04002159 include/generated/env.* drivers/video/u_boot_logo.S \
Heinrich Schuchardt6a56fc02022-03-30 12:11:00 +02002160 tools/version.h u-boot* MLO* SPL System.map fit-dtb.blob* \
Thomas Hebb57297e62019-11-10 08:25:08 -08002161 u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
Thomas Hebb983c0f92019-11-10 08:25:10 -08002162 lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
Adam Ford824204e2021-12-22 10:40:27 -06002163 idbloader.img flash.bin flash.log defconfig keep-syms-lto.c \
2164 mkimage-out.spl.mkimage mkimage.spl.mkimage imx-boot.map \
Quentin Schulz32c8d1c2022-09-02 15:10:50 +02002165 itb.fit.fit itb.fit.itb itb.map spl.map mkimage-out.rom.mkimage \
Quentin Schulze1faa532022-09-02 15:10:55 +02002166 mkimage.rom.mkimage rom.map simple-bin.map simple-bin-spi.map \
Heinrich Schuchardt12858ab2023-06-02 22:18:23 +02002167 idbloader-spi.img lib/efi_loader/helloworld_efi.S
Mike Frysinger9f4a4202009-10-01 12:11:54 -04002168
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002169# Directories & files removed with 'make mrproper'
Tobias Deiminger45e636f2023-06-20 00:41:04 +02002170MRPROPER_DIRS += include/config include/generated spl tpl vpl \
Simon Glassc72c7d92021-07-02 12:36:13 -06002171 .tmp_objdiff doc/output include/asm
Simon Glassa7d03d52021-05-06 19:32:23 -06002172
2173# Remove include/asm symlink created by U-Boot before v2014.01
Masahiro Yamada51148792014-07-30 14:08:17 +09002174MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
Heinrich Schuchardt1249fa82019-01-29 21:15:21 +01002175 ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
Simon Glassa7d03d52021-05-06 19:32:23 -06002176 drivers/video/fonts/*.S include/asm
wdenk7ebf7442002-11-02 23:17:16 +00002177
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002178# clean - Delete most, but leave enough to build external modules
2179#
2180clean: rm-dirs := $(CLEAN_DIRS)
2181clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00002182
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09002183clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00002184
Tom Rini08fcdd32018-07-25 11:38:17 -04002185clean-dirs := $(addprefix _clean_, $(clean-dirs))
wdenk7ebf7442002-11-02 23:17:16 +00002186
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002187PHONY += $(clean-dirs) clean archclean
2188$(clean-dirs):
2189 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
2190
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002191clean: $(clean-dirs)
2192 $(call cmd,rmdirs)
2193 $(call cmd,rmfiles)
2194 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
2195 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
Heinrich Schuchardtd4c51412019-10-03 16:45:29 +00002196 -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002197 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
Eugeniu Roscae91610d2018-05-19 14:13:50 +02002198 -o -name '*.lex.c' -o -name '*.tab.[ch]' \
AKASHI Takahiroed3dead2019-11-13 09:44:54 +09002199 -o -name '*.asn1.[ch]' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002200 -o -name '*.symtypes' -o -name 'modules.order' \
2201 -o -name modules.builtin -o -name '.tmp_*.o.*' \
Philippe Reynes5d94cbd2022-02-22 14:54:39 +01002202 -o -name 'dsdt_generated.aml' -o -name 'dsdt_generated.asl.tmp' \
2203 -o -name 'dsdt_generated.c' \
Heinrich Schuchardt7f474ef2018-05-24 19:34:45 +02002204 -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
Thomas Hebb0f18cf32019-11-10 08:25:09 -08002205 -type f -print | xargs rm -f
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002206
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002207# mrproper - Delete all generated files, including .config
2208#
2209mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
2210mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
2211mrproper-dirs := $(addprefix _mrproper_,scripts)
2212
2213PHONY += $(mrproper-dirs) mrproper archmrproper
2214$(mrproper-dirs):
2215 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
2216
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002217mrproper: clean $(mrproper-dirs)
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002218 $(call cmd,rmdirs)
2219 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09002220 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002221
2222# distclean
2223#
2224PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09002225
2226distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002227 @find $(srctree) $(RCS_FIND_IGNORE) \
2228 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
2229 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09002230 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
2231 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002232 -type f -print | xargs rm -f
Robert P. J. Dayc1180aa2019-01-18 08:41:23 -05002233 @rm -f boards.cfg CHANGELOG
wdenk7ebf7442002-11-02 23:17:16 +00002234
Simon Glassfeafc612021-11-21 20:48:40 -07002235# See doc/develop/python_cq.rst
Simon Glassf44a52a2022-02-11 13:23:24 -07002236PHONY += pylint pylint_err
Simon Glassfeafc612021-11-21 20:48:40 -07002237PYLINT_BASE := scripts/pylint.base
2238PYLINT_CUR := pylint.cur
2239PYLINT_DIFF := pylint.diff
2240pylint:
2241 $(Q)echo "Running pylint on all files (summary in $(PYLINT_CUR); output in pylint.out/)"
2242 $(Q)mkdir -p pylint.out
2243 $(Q)rm -f pylint.out/out*
2244 $(Q)find tools test -name "*.py" \
2245 | xargs -n1 -P$(shell nproc 2>/dev/null || echo 1) \
2246 sh -c 'pylint --reports=y --exit-zero -f parseable --ignore-imports=yes $$@ > pylint.out/$$(echo $$@ | tr / _ | sed s/.py//)' _
Simon Glassf8753f02022-01-28 21:31:07 -07002247 $(Q)rm -f $(PYLINT_CUR)
2248 $(Q)( cd pylint.out; for f in *; do \
2249 sed -ne "s/Your code has been rated at \([-0-9.]*\).*/$$f \1/p" $$f; \
2250 done ) | sort > $(PYLINT_CUR)
Simon Glassfeafc612021-11-21 20:48:40 -07002251 $(Q)base=$$(mktemp) cur=$$(mktemp); cut -d' ' -f1 $(PYLINT_BASE) >$$base; \
2252 cut -d' ' -f1 $(PYLINT_CUR) >$$cur; \
2253 comm -3 $$base $$cur > $(PYLINT_DIFF); \
2254 if [ -s $(PYLINT_DIFF) ]; then \
2255 echo "Files have been added/removed. Try:\n\tcp $(PYLINT_CUR) $(PYLINT_BASE)"; \
2256 echo; \
2257 echo "Added files:"; \
2258 comm -13 $$base $$cur; \
2259 echo; \
2260 echo "Removed files:"; \
2261 comm -23 $$base $$cur; \
2262 false; \
2263 else \
2264 rm $$base $$cur $(PYLINT_DIFF); \
2265 fi
2266 $(Q)bad=false; while read base_file base_val <&3 && read cur_file cur_val <&4; do \
2267 if awk "BEGIN {exit !($$cur_val < $$base_val)}"; then \
2268 echo "$$base_file: Score was $$base_val, now $$cur_val"; \
2269 bad=true; fi; \
2270 done 3<$(PYLINT_BASE) 4<$(PYLINT_CUR); \
2271 if $$bad; then \
2272 echo "Some files have regressed, please fix"; \
2273 false; \
2274 else \
2275 echo "No pylint regressions"; \
2276 fi
2277
Simon Glassf44a52a2022-02-11 13:23:24 -07002278# Check for errors only
2279pylint_err:
2280 $(Q)pylint -E -j 0 --ignore-imports=yes \
2281 $(shell find tools test -name "*.py")
2282
wdenk7ebf7442002-11-02 23:17:16 +00002283backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09002284 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04002285 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00002286
Simon Glass75554df2023-02-23 18:18:06 -07002287PHONY += _pip pip pip_release
2288
2289pip_release: PIP_ARGS="--real"
2290pip_test: PIP_ARGS=""
2291pip: PIP_ARGS="-n"
2292
2293pip pip_test pip_release: _pip
2294
2295_pip:
2296 scripts/make_pip.sh u_boot_pylib ${PIP_ARGS}
Simon Glass30eb11a2023-02-23 18:18:08 -07002297 scripts/make_pip.sh patman ${PIP_ARGS}
Simon Glass0de2ffe2023-02-23 18:18:13 -07002298 scripts/make_pip.sh buildman ${PIP_ARGS}
Simon Glass77b3ccb2023-02-23 18:18:17 -07002299 scripts/make_pip.sh dtoc ${PIP_ARGS}
Simon Glassada5e2f2023-02-23 18:18:21 -07002300 scripts/make_pip.sh binman ${PIP_ARGS}
Simon Glass75554df2023-02-23 18:18:06 -07002301
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002302help:
2303 @echo 'Cleaning targets:'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09002304 @echo ' clean - Remove most generated files but keep the config'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002305 @echo ' mrproper - Remove all generated files + config + various backup files'
2306 @echo ' distclean - mrproper + remove editor backup and patch files'
2307 @echo ''
Masahiro Yamada51148792014-07-30 14:08:17 +09002308 @echo 'Configuration targets:'
2309 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
2310 @echo ''
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002311 @echo 'Test targets:'
2312 @echo ''
2313 @echo ' check - Run all automated tests that use sandbox'
Simon Glassd1962ac2022-08-06 17:51:59 -06002314 @echo ' pcheck - Run quick automated tests in parallel'
Simon Glass499fde52018-11-18 08:14:29 -07002315 @echo ' qcheck - Run quick automated tests that use sandbox'
Simon Glass76160802020-04-17 18:08:59 -06002316 @echo ' tcheck - Run quick automated tests on tools'
Simon Glassfeafc612021-11-21 20:48:40 -07002317 @echo ' pylint - Run pylint on all Python files'
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002318 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002319 @echo 'Other generic targets:'
2320 @echo ' all - Build all necessary images depending on configuration'
Simon Glass633cc7a2016-07-31 17:35:01 -06002321 @echo ' tests - Build U-Boot for sandbox and run tests'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09002322 @echo '* u-boot - Build the bare u-boot'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002323 @echo ' dir/ - Build all files in dir and below'
2324 @echo ' dir/file.[oisS] - Build specified target only'
2325 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
2326 @echo ' (requires a recent binutils and recent build (System.map))'
Igor Grinberg5fc2f922014-07-15 15:52:02 +03002327 @echo ' tags/ctags - Generate ctags file for editors'
2328 @echo ' etags - Generate etags file for editors'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002329 @echo ' cscope - Generate cscope index'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09002330 @echo ' ubootrelease - Output the release version string (use with make -s)'
2331 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
Simon Glass1bd87632016-11-13 14:25:50 -07002332 @echo " cfg - Don't build, just create the .cfg files"
Simon Glass84a42062017-09-05 01:53:59 -06002333 @echo " envtools - Build only the target-side environment tools"
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002334 @echo ''
Simon Glass75554df2023-02-23 18:18:06 -07002335 @echo 'PyPi / pip targets:'
2336 @echo ' pip - Check building of PyPi packages'
2337 @echo ' pip_test - Build PyPi pakages and upload to test server'
2338 @echo ' pip_release - Build PyPi pakages and upload to release server'
2339 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002340 @echo 'Static analysers'
2341 @echo ' checkstack - Generate a list of stack hogs'
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01002342 @echo ' coccicheck - Execute static code analysis with Coccinelle'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002343 @echo ''
2344 @echo 'Documentation targets:'
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00002345 @$(MAKE) -f $(srctree)/doc/Makefile dochelp
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002346 @echo ''
2347 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
2348 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
2349 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
2350 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
2351 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
2352 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
2353 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
2354 @echo ' 1: warnings which may be relevant and do not occur too often'
2355 @echo ' 2: warnings which occur quite often but may still be relevant'
2356 @echo ' 3: more obscure warnings, can most likely be ignored'
2357 @echo ' Multiple levels can be combined with W=12 or W=123'
2358 @echo ''
2359 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
2360 @echo 'For further info see the ./README file'
2361
Simon Glassa3a3f5d2018-10-01 21:12:36 -06002362tests check:
Simon Glass633cc7a2016-07-31 17:35:01 -06002363 $(srctree)/test/run
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002364
Simon Glassd1962ac2022-08-06 17:51:59 -06002365pcheck:
2366 $(srctree)/test/run parallel
2367
Simon Glass499fde52018-11-18 08:14:29 -07002368qcheck:
2369 $(srctree)/test/run quick
2370
Simon Glass76160802020-04-17 18:08:59 -06002371tcheck:
2372 $(srctree)/test/run tools
2373
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002374# Documentation targets
2375# ---------------------------------------------------------------------------
Mario Six78a88f72018-07-10 08:40:17 +02002376DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
Maxim Cournoyer7fa4c272022-12-18 21:48:08 -05002377 linkcheckdocs dochelp refcheckdocs texinfodocs infodocs
Mario Six78a88f72018-07-10 08:40:17 +02002378PHONY += $(DOC_TARGETS)
2379$(DOC_TARGETS): scripts_basic FORCE
Breno Matheus Lima656d8da2019-06-05 18:18:30 +00002380 $(Q)$(MAKE) $(build)=doc $@
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09002381
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09002382PHONY += checkstack ubootrelease ubootversion
2383
2384checkstack:
2385 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
2386 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
2387
2388ubootrelease:
2389 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
2390
2391ubootversion:
2392 @echo $(UBOOTVERSION)
2393
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002394# Single targets
2395# ---------------------------------------------------------------------------
2396# Single targets are compatible with:
2397# - build with mixed source and output
2398# - build with separate output dir 'make O=...'
2399# - external modules
2400#
2401# target-dir => where to store outputfile
2402# build-dir => directory in kernel source tree to use
2403
2404ifeq ($(KBUILD_EXTMOD),)
2405 build-dir = $(patsubst %/,%,$(dir $@))
2406 target-dir = $(dir $@)
2407else
2408 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
2409 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
2410 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
2411endif
2412
2413%.s: %.c prepare scripts FORCE
2414 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2415%.i: %.c prepare scripts FORCE
2416 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2417%.o: %.c prepare scripts FORCE
2418 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2419%.lst: %.c prepare scripts FORCE
2420 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2421%.s: %.S prepare scripts FORCE
2422 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2423%.o: %.S prepare scripts FORCE
2424 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2425%.symtypes: %.c prepare scripts FORCE
2426 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
2427
2428# Modules
2429/: prepare scripts FORCE
2430 $(cmd_crmodverdir)
2431 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2432 $(build)=$(build-dir)
2433%/: prepare scripts FORCE
2434 $(cmd_crmodverdir)
2435 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2436 $(build)=$(build-dir)
2437%.ko: prepare scripts FORCE
2438 $(cmd_crmodverdir)
2439 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
2440 $(build)=$(build-dir) $(@:.ko=.o)
2441 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
2442
Jan Kiszka2600dd82021-06-20 22:29:13 +02002443quiet_cmd_genenv = GENENV $@
Max Krummenacher486aef02022-11-28 09:41:22 +01002444cmd_genenv = \
2445 $(objtree)/tools/printinitialenv | \
2446 sed -e '/^\s*$$/d' | \
Marek Vasut779e38a2023-07-20 14:50:42 +02002447 sort -t '=' -k 1,1 -s -o $@
Stefano Babicbdaa73a2019-03-13 09:46:45 +01002448
Max Krummenacher486aef02022-11-28 09:41:22 +01002449u-boot-initial-env: $(env_h) FORCE
2450 $(Q)$(MAKE) $(build)=tools $(objtree)/tools/printinitialenv
Stefano Babicbdaa73a2019-03-13 09:46:45 +01002451 $(call if_changed,genenv)
2452
Heinrich Schuchardt8a28caf2017-11-19 14:33:14 +01002453# Consistency checks
2454# ---------------------------------------------------------------------------
2455
2456PHONY += coccicheck
2457
2458coccicheck:
2459 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
2460
Michal Simek69c0d322014-04-24 15:24:28 +02002461# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09002462# ===========================================================================
2463
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09002464quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
2465 cmd_rmdirs = rm -rf $(rm-dirs)
2466
2467quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
2468 cmd_rmfiles = rm -f $(rm-files)
2469
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09002470# read all saved command lines
2471
Tom Rini473fc272021-06-17 18:07:25 -04002472cmd_files := $(wildcard .*.cmd)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09002473
2474ifneq ($(cmd_files),)
2475 $(cmd_files): ; # Do not try to update included dependency files
2476 include $(cmd_files)
2477endif
2478
Tom Rini473fc272021-06-17 18:07:25 -04002479endif #ifeq ($(config-targets),1)
2480endif #ifeq ($(mixed-targets),1)
Masahiro Yamada9e414032014-02-04 17:24:24 +09002481endif # skip-makefile
2482
2483PHONY += FORCE
2484FORCE:
2485
Tom Rini5972ff02020-03-11 18:11:17 -04002486# Declare the contents of the PHONY variable as phony. We keep that
Masahiro Yamada9e414032014-02-04 17:24:24 +09002487# information in a variable so we can use it in if_changed and friends.
2488.PHONY: $(PHONY)